diff options
3 files changed, 43 insertions, 43 deletions
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig index 3839f9f106..61bcb25ddd 100755 --- a/target/linux/brcm47xx/base-files/etc/init.d/netconfig +++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig @@ -81,10 +81,10 @@ start() { BEGIN { FS="=" - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5" - c["vlan1ports"]="0 5" + c["lan_ifname"]="eth0.1" + c["wan_ifname"]="eth0.2" + c["vlan1ports"]="1 2 3 4 5" + c["vlan2ports"]="0 5" getline < "/proc/diag/model" model=$0 for (i = 0; i < 6; i++) { @@ -95,8 +95,8 @@ start() { getline < "/proc/switch/eth0/cpuport" cpuport=$0 if (cpuport == "8") { - c["vlan0ports"]="1 2 3 4 8" - c["vlan1ports"]="0 8" + c["vlan1ports"]="1 2 3 4 8" + c["vlan2ports"]="0 8" } } } @@ -109,13 +109,13 @@ start() { END { if (((nvram["vlan0ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan1ports"] ~ /^4 8/ && (cpuport == "8"))) || \ ((nvram["vlan1ports"] ~ /^0 1 2 3 8/ ) && (nvram["vlan2ports"] ~ /^4 8/ && (cpuport == "8")))) { - c["vlan0ports"] = "0 1 2 3 8" - c["vlan1ports"] = "4 8" + c["vlan1ports"] = "0 1 2 3 8" + c["vlan2ports"] = "4 8" } if (((nvram["vlan0ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan1ports"] ~ /^4 5/ && (cpuport == "5"))) || \ ((nvram["vlan1ports"] ~ /^0 1 2 3 5/ ) && (nvram["vlan2ports"] ~ /^4 5/ && (cpuport == "5")))) { - c["vlan0ports"] = "0 1 2 3 5" - c["vlan1ports"] = "4 5" + c["vlan1ports"] = "0 1 2 3 5" + c["vlan2ports"] = "4 5" } if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { c["wan_ifname"] = "" @@ -123,23 +123,23 @@ start() { } if (model == "ASUS WL-330gE") { c["wan_ifname"] = "" - c["lan_ifname"] = "eth0.0" - c["vlan0ports"] = "4 5" - c["vlan1ports"] = "" + c["lan_ifname"] = "eth0.1" + c["vlan1ports"] = "4 5" + c["vlan2ports"] = "" } if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) { c["wan_ifname"] = "eth1" c["lan_ifname"] = "eth0" } if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) { - c["vlan0ports"] = "0 1 2 3 5" - c["vlan1ports"] = "4 5" + c["vlan1ports"] = "0 1 2 3 5" + c["vlan2ports"] = "4 5" } if (model == "Dell TrueMobile 2300") { c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" + c["vlan1ports"] = "0 1 2 3 4 5u" + c["vlan2ports"] = "" } if (nvram["boardtype"] == "bcm94710r4") { # Toshiba WRC-1000 @@ -147,18 +147,18 @@ start() { c["wan_ifname"] = "eth1" } if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) { - c["vlan0ports"] = "0 1 2 3 5" - c["vlan1ports"] = "4 5" + c["vlan1ports"] = "0 1 2 3 5" + c["vlan2ports"] = "4 5" } if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { if (nvram["boardnum"] == "45") { # WL-500gP - c["vlan0ports"] = "1 2 3 4 5" - c["vlan1ports"] = "0 5" + c["vlan1ports"] = "1 2 3 4 5" + c["vlan2ports"] = "0 5" } else { # Generic BCM94704 - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" + c["vlan1ports"] = "0 1 2 3 4 5u" + c["vlan2ports"] = "" c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" @@ -171,8 +171,8 @@ start() { } # Buffalo WBR-B11 and Buffalo WBR-G54 if (nvram["boardtype"] == "bcm94710ap") { - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" + c["vlan1ports"] = "0 1 2 3 4 5u" + c["vlan2ports"] = "" c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" } @@ -196,41 +196,41 @@ start() { # Generic BCM94704 settings instead so we revert to proper settings here. # Hopefully someone will fix this properly soon. if (model == "ASUS WL-700gE") { - c["lan_ifname"]="eth0.0" - c["wan_ifname"]="eth0.1" - c["vlan0ports"]="1 2 3 4 5" - c["vlan1ports"]="0 5" + c["lan_ifname"]="eth0.1" + c["wan_ifname"]="eth0.2" + c["vlan1ports"]="1 2 3 4 5" + c["vlan2ports"]="0 5" } if ((model == "Motorola WR850G V2/V3") || (model == "Siemens SE505 V2")) { - c["vlan0ports"]="0 1 2 3 5" - c["vlan1ports"]="4 5" + c["vlan1ports"]="0 1 2 3 5" + c["vlan2ports"]="4 5" } if (model == "ASUS WL-500W") { c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" - c["vlan0ports"] = "0 1 2 3 4 5u" - c["vlan1ports"] = "" + c["vlan1ports"] = "0 1 2 3 4 5u" + c["vlan2ports"] = "" } if (model == "OvisLink WL-1600GL") { - c["lan_ifname"] = "eth0.0" - c["wan_ifname"] = "eth0.1" - c["vlan0ports"] = "0 1 2 3 5" - c["vlan1ports"] = "4 5" + c["lan_ifname"] = "eth0.1" + c["wan_ifname"] = "eth0.2" + c["vlan1ports"] = "0 1 2 3 5" + c["vlan2ports"] = "4 5" } if (model == "SimpleTech SimpleShare NAS") { c["lan_ifname"] = "eth0" c["wan_ifname"] = "" - c["vlan0ports"] = "" c["vlan1ports"] = "" + c["vlan2ports"] = "" } - if (c["vlan0ports"] || c["vlan1ports"]) { + if (c["vlan1ports"] || c["vlan2ports"]) { print "#### VLAN configuration " print "config switch eth0" print " option enable 1" print "" - vlan(0, "vlan0ports") vlan(1, "vlan1ports") + vlan(2, "vlan2ports") } print "#### Loopback configuration" print "config interface loopback" diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm index c7d0fc8da8..dd8fd6e9f6 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm @@ -3,7 +3,7 @@ failsafe_ip() { [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && { ifconfig eth0 0.0.0.0 down - echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports } [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm index 0a8915080f..8c425a094e 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm @@ -27,11 +27,11 @@ preinit_net_echo() { # this would be easier if we blasted the message across all ports # but we don't want packets leaking across interfaces for port in $(seq 0 4); do { - echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports port_net_echo $1 }; done - echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports } || port_net_echo $1 } |