aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds13
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh2
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata2
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh6
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh2
-rw-r--r--target/linux/ar71xx/config-4.44
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt21
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile2
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c223
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c135
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h2
-rw-r--r--target/linux/ar71xx/image/tp-link.mk39
-rw-r--r--target/linux/ar71xx/mikrotik/config-default2
-rw-r--r--target/linux/ar71xx/nand/config-default2
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c71
16 files changed, 531 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 7a7329f965..b1ecb0204f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -41,6 +41,19 @@ antrouter-r1)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
;;
+archer-c59-v1|\
+archer-c60-v1)
+ ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
+ ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+
+ case "$board" in
+ archer-c59-v1)
+ ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
+ ;;
+ esac
+ ;;
arduino-yun)
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 551871e0fe..976440e605 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -196,6 +196,11 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
+ archer-c59-v1|\
+ archer-c60-v1)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+ ;;
arduino-yun|\
dir-505-a1|\
tl-wa801nd-v3)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 4bbb93a60f..edcf621b76 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -41,6 +41,8 @@ get_status_led() {
ap135-020)
status_led="ap135:green:status"
;;
+ archer-c59-v1|\
+ archer-c60-v1|\
mr12|\
mr16|\
nbg6616|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index a4f426e142..8693d8a0aa 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -90,6 +90,8 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
+ archer-c59-v1|\
+ archer-c60-v1|\
tl-wdr6500-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index ad73ec1520..3ca2c0d633 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -454,6 +454,12 @@ ar71xx_board_detect() {
*"Archer C5")
name="archer-c5"
;;
+ *"Archer C59 v1")
+ name="archer-c59-v1"
+ ;;
+ *"Archer C60 v1")
+ name="archer-c60-v1"
+ ;;
*"Archer C7")
name="archer-c7"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e0ba5d37ff..cf2aab2737 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -205,6 +205,8 @@ platform_check_image() {
airrouter|\
ap132|\
ap90q|\
+ archer-c59-v1|\
+ archer-c60-v1|\
bullet-m|\
c-55|\
carambola2|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 26de3a6393..8ba0c2a18f 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -49,6 +49,8 @@ CONFIG_ATH79_MACH_AP152=y
# CONFIG_ATH79_MACH_AP81 is not set
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C59_V1=y
+CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
@@ -272,6 +274,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
CONFIG_GPIO_DEVRES=y
# CONFIG_GPIO_LATCH is not set
CONFIG_GPIO_NXP_74HC153=y
@@ -430,6 +433,7 @@ CONFIG_SOC_QCA956X=y
CONFIG_SPI=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_RB4XX is not set
# CONFIG_SPI_VSC7385 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index c3f958869e..d06ae48161 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1255,6 +1255,27 @@ config ATH79_MACH_BSB
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C59_V1
+ bool "TP-LINK Archer C59 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ARCHER_C60_V1
+ bool "TP-LINK Archer C60 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index ac0bbc46bf..e9d69a4d01 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -54,6 +54,8 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
new file mode 100644
index 0000000000..28353aa77b
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -0,0 +1,223 @@
+/*
+ * TP-Link Archer C59 v1 board support
+ *
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ARCHER_C59_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C59_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C59_V1_GPIO_BTN_RESET 21
+#define ARCHER_C59_V1_GPIO_BTN_RFKILL 2
+#define ARCHER_C59_V1_GPIO_BTN_WPS 1
+
+#define ARCHER_C59_V1_GPIO_USB_POWER 22
+
+#define ARCHER_C59_GPIO_SHIFT_OE 16
+#define ARCHER_C59_GPIO_SHIFT_SER 17
+#define ARCHER_C59_GPIO_SHIFT_SRCLK 18
+#define ARCHER_C59_GPIO_SHIFT_SRCLR 19
+#define ARCHER_C59_GPIO_SHIFT_RCLK 20
+
+#define ARCHER_C59_74HC_GPIO_BASE QCA956X_GPIO_COUNT
+#define ARCHER_C59_74HC_GPIO_LED_POWER 23
+#define ARCHER_C59_74HC_GPIO_LED_WLAN2 24
+#define ARCHER_C59_74HC_GPIO_LED_WLAN5 25
+#define ARCHER_C59_74HC_GPIO_LED_LAN 26
+#define ARCHER_C59_74HC_GPIO_LED_WAN_GREEN 27
+#define ARCHER_C59_74HC_GPIO_LED_WAN_AMBER 28
+#define ARCHER_C59_74HC_GPIO_LED_WPS 29
+#define ARCHER_C59_74HC_GPIO_LED_USB 30
+
+#define ARCHER_C59_V1_SSR_BIT_0 0
+#define ARCHER_C59_V1_SSR_BIT_1 1
+#define ARCHER_C59_V1_SSR_BIT_2 2
+#define ARCHER_C59_V1_SSR_BIT_3 3
+#define ARCHER_C59_V1_SSR_BIT_4 4
+#define ARCHER_C59_V1_SSR_BIT_5 5
+#define ARCHER_C59_V1_SSR_BIT_6 6
+#define ARCHER_C59_V1_SSR_BIT_7 7
+
+#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
+#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
+
+static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c59-v1:green:power",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wlan2g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wlan5g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:lan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:amber:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wps",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:usb",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_USB,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct spi_gpio_platform_data archer_c59_v1_spi_data = {
+ .sck = ARCHER_C59_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = ARCHER_C59_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 archer_c59_v1_ssr_initdata[] __initdata = {
+ BIT(ARCHER_C59_V1_SSR_BIT_7) |
+ BIT(ARCHER_C59_V1_SSR_BIT_6) |
+ BIT(ARCHER_C59_V1_SSR_BIT_5) |
+ BIT(ARCHER_C59_V1_SSR_BIT_4) |
+ BIT(ARCHER_C59_V1_SSR_BIT_3) |
+ BIT(ARCHER_C59_V1_SSR_BIT_2) |
+ BIT(ARCHER_C59_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c59_v1_ssr_data = {
+ .base = ARCHER_C59_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(archer_c59_v1_ssr_initdata),
+ .init_data = archer_c59_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c59_v1_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &archer_c59_v1_spi_data,
+ },
+};
+
+static struct spi_board_info archer_c59_v1_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &archer_c59_v1_ssr_data,
+ .controller_data = (void *) ARCHER_C59_GPIO_SHIFT_RCLK,
+ },
+};
+
+static void __init archer_c59_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ spi_register_board_info(archer_c59_v1_spi_info,
+ ARRAY_SIZE(archer_c59_v1_spi_info));
+ platform_device_register(&archer_c59_v1_spi_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
+ archer_c59_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c59_v1_gpio_keys),
+ archer_c59_v1_gpio_keys);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_mask = BIT(4);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
+
+
+ ath79_register_usb();
+ gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ gpio_request_one(ARCHER_C59_GPIO_SHIFT_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "LED control");
+ gpio_request_one(ARCHER_C59_GPIO_SHIFT_SRCLR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LED reset");
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
+ "TP-LINK Archer C59 v1", archer_c59_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
new file mode 100644
index 0000000000..78186f02cd
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
@@ -0,0 +1,135 @@
+/*
+ * TP-Link Archer C60 v1 board support
+ *
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ARCHER_C60_V1_GPIO_LED_LAN 2
+#define ARCHER_C60_V1_GPIO_LED_POWER 16
+#define ARCHER_C60_V1_GPIO_LED_WLAN2 17
+#define ARCHER_C60_V1_GPIO_LED_WLAN5 18
+#define ARCHER_C60_V1_GPIO_LED_WPS 19
+#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20
+#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22
+
+
+#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C60_V1_GPIO_BTN_RESET 21
+#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1
+
+
+
+#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000
+#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000
+
+static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c60-v1:green:power",
+ .gpio = ARCHER_C60_V1_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wlan2g",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wlan5g",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:lan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:amber:wan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wps",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C60_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static void __init archer_c60_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio),
+ archer_c60_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c60_v1_gpio_keys),
+ archer_c60_v1_gpio_keys);
+
+ ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+ QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
+ "TP-LINK Archer C60 v1", archer_c60_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 857d0eee89..12e81dbe5b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -38,6 +38,8 @@ enum ath79_mach_type {
ATH79_MACH_AP90Q, /* YunCore AP90Q */
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
+ ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
+ ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARDUINO_YUN, /* Yun */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 480d9ad39d..d163ffb0fe 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -45,6 +45,15 @@ define Build/mktplinkfw-kernel
@mv $@.new $@
endef
+define Build/uImageArcher
+ mkimage -A $(LINUX_KARCH) \
+ -O linux -T kernel \
+ -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+ -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
+ @mv $@.new $@
+endef
+
+
define Device/tplink
TPLINK_HWREV := 0x1
TPLINK_HEADER_VERSION := 1
@@ -95,6 +104,36 @@ $(Device/tplink)
IMAGE_SIZE := 15872k
endef
+define Device/archer-c59-v1
+ DEVICE_TITLE := TP-LINK Archer C59 v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k
+ BOARDNAME := ARCHER-C59-V1
+ TPLINK_BOARD_NAME := ARCHER-C59-V1
+ DEVICE_PROFILE := ARCHERC59V1
+ IMAGE_SIZE := 14528k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1536k(kernel),12992k(rootfs),1664k(tplink)ro,64k(art)ro,14528k@0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c59-v1
+
+define Device/archer-c60-v1
+ DEVICE_TITLE := TP-LINK Archer C60 v1
+ DEVICE_PACKAGES := kmod-ath10k
+ BOARDNAME := ARCHER-C60-V1
+ TPLINK_BOARD_NAME := ARCHER-C60-V1
+ DEVICE_PROFILE := ARCHERC60V1
+ IMAGE_SIZE := 7936k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c60-v1
+
define Device/cpe510-520
DEVICE_TITLE := TP-LINK CPE510/520
DEVICE_PACKAGES := rssileds
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 44ea327fb1..6440bc499c 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -15,6 +15,8 @@
# CONFIG_ATH79_MACH_AP152 is not set
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 515266b0f8..3fcb3e631b 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -8,6 +8,8 @@
# CONFIG_ATH79_MACH_AP136 is not set
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
# CONFIG_ATH79_MACH_CAP324 is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 89a6787b22..a1dc987fb5 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -293,6 +293,77 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the C59v1 */
+ {
+ .id = "ARCHER-C59-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x10000},
+ {"default-mac", 0x10000, 0x00200},
+ {"pin", 0x10200, 0x00200},
+ {"device-id", 0x10400, 0x00100},
+ {"product-info", 0x10500, 0x0fb00},
+ {"os-image", 0x20000, 0x180000},
+ {"file-system", 0x1a0000, 0xcb0000},
+ {"partition-table", 0xe50000, 0x10000},
+ {"soft-version", 0xe60000, 0x10000},
+ {"support-list", 0xe70000, 0x10000},
+ {"profile", 0xe80000, 0x10000},
+ {"default-config", 0xe90000, 0x10000},
+ {"user-config", 0xea0000, 0x40000},
+ {"usb-config", 0xee0000, 0x10000},
+ {"certificate", 0xef0000, 0x10000},
+ {"qos-db", 0xf00000, 0x40000},
+ {"log", 0xfe0000, 0x10000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
+ /** Firmware layout for the C60v1 */
+ {
+ .id = "ARCHER-C60-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x10000},
+ {"default-mac", 0x10000, 0x00200},
+ {"pin", 0x10200, 0x00200},
+ {"product-info", 0x10400, 0x00100},
+ {"partition-table", 0x10500, 0x00800},
+ {"soft-version", 0x11300, 0x00200},
+ {"support-list", 0x11500, 0x00100},
+ {"device-id", 0x11600, 0x00100},
+ {"profile", 0x11700, 0x03900},
+ {"default-config", 0x15000, 0x04000},
+ {"user-config", 0x19000, 0x04000},
+ {"os-image", 0x20000, 0x150000},
+ {"file-system", 0x170000, 0x678000},
+ {"certyficate", 0x7e8000, 0x08000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the C9 */
{
.id = "ARCHERC9",
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 06:55:08 +0000