diff options
| -rw-r--r-- | target/linux/ramips/base-files/etc/board.d/01_leds | 4 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 7 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 2 | ||||
| -rw-r--r-- | target/linux/ramips/dts/MIR3G.dts | 163 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 20 |
7 files changed, 202 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index a2d5c2e7de..ff5d156f2c 100644 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -242,6 +242,10 @@ miniembplug) set_wifi_led "$board:red:wlan" set_usb_led "$board:green:mobile" ;; +mir3g) + ucidef_set_led_netdev "eth" "Ethernet" "$board:red:wan" "eth0" + set_usb_led "$board:blue:usb" + ;; miwifi-mini) ucidef_set_led_default "power" "power" "$board:red:status" "1" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2f001134a2..df70a8b2ec 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -122,6 +122,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; + mir3g) + ucidef_add_switch "switch0" \ + "1:wan" "2:lan:2" "3:lan:1" "6@eth0" + ;; psg1218b) ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0" @@ -421,6 +425,9 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_binary factory_info 13) wan_mac=$(macaddr_add "$lan_mac" 1) ;; + mir3g) + lan_mac=$(mtd_get_mac_binary Factory e006) + ;; miwifi-mini) wan_mac=$(cat /sys/class/net/eth0/address) lan_mac=$(macaddr_setbit_la "$wan_mac") diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 5278830eb7..960e189283 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -177,6 +177,9 @@ get_status_led() { m4-8M) status_led="m4:blue:status" ;; + mir3g) + status_led="$board:yellow:status" + ;; miwifi-mini|\ zte-q7) status_led="$board:red:status" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index a3f376e6ac..fe66a87c2e 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -286,6 +286,9 @@ ramips_board_detect() { *"Mercury MAC1200R v2") name="mac1200rv2" ;; + *"Mi Router 3G") + name="mir3g" + ;; *"MicroWRT") name="microwrt" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 8977381c86..3cb1d19a28 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -251,6 +251,7 @@ platform_check_image() { return 0 ;; hc5962|\ + mir3g|\ r6220) # these boards use metadata images return 0 @@ -297,6 +298,7 @@ platform_do_upgrade() { case "$board" in hc5962|\ + mir3g|\ r6220|\ ubnt-erx|\ ubnt-erx-sfp) diff --git a/target/linux/ramips/dts/MIR3G.dts b/target/linux/ramips/dts/MIR3G.dts new file mode 100644 index 0000000000..0cdb6d57f3 --- /dev/null +++ b/target/linux/ramips/dts/MIR3G.dts @@ -0,0 +1,163 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "xiaomi,mir3g", "mediatek,mt7621-soc"; + model = "Xiaomi Mi Router 3G"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wan { + label = "mir3g:red:wan"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "mir3g:blue:usb"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + status { + label = "mir3g:yellow:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&nand { + status = "okay"; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "Config"; + reg = <0x80000 0x40000>; + read-only; + }; + + partition@c0000 { + label = "Bdata"; + reg = <0xc0000 0x40000>; + read-only; + }; + + factory: partition@100000 { + label = "Factory"; + reg = <0x100000 0x40000>; + read-only; + }; + + partition@140000 { + label = "crash"; + reg = <0x140000 0x40000>; + read-only; + }; + + partition@180000 { + label = "crash_syslog"; + reg = <0x180000 0x40000>; + read-only; + }; + + partition@1c0000 { + label = "reserved0"; + reg = <0x1c0000 0x40000>; + read-only; + }; + + /* + * kernel0 partition should be erased, so + * u-boot in failsafe routine switches + * to next one looking for kernel image. + * To remind about this fact rename kernel0 + * into kernel_erase. + */ + partition@200000 { + label = "kernel_erase"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "kernel"; + reg = <0x600000 0x400000>; + }; + + /* ubi partition is the result of squashing + * next consequent stock partitions: + * - rootfs0 (rootfs partition for stock kernel0), + * - rootfs1 (rootfs partition for stock failsafe kernel1), + * - overlay (used as ubi overlay in stock fw) + * resulting 117,5MiB space for packages. + */ + partition@a00000 { + label = "ubi"; + reg = <0xa00000 0x7580000>; + }; +}; + +&pcie { + status = "okay"; + + pcie0 { + wifi@14c3,7603 { + compatible = "pci14c3,7603"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + }; + }; + + pcie1 { + wifi@14c3,7662 { + compatible = "pci14c3,7662"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; + mediatek,portmap = "lwlll"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag", "uart3", "wdt"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index a67facb83b..779616292d 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -105,6 +105,26 @@ define Device/k2p endef TARGET_DEVICES += k2p +define Device/mir3g + DTS := MIR3G + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 4096k + KERNEL := $(KERNEL_DTB) | uImage lzma + IMAGE_SIZE := 32768k + UBINIZE_OPTS := -E 5 + IMAGES := sysupgrade.tar kernel1.bin rootfs0.bin + IMAGE/kernel1.bin := append-kernel + IMAGE/rootfs0.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata + DEVICE_TITLE := Xiaomi Mi Router 3G + SUPPORTED_DEVICES += R3G + DEVICE_PACKAGES := \ + kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-mini \ + kmod-softdog +endef +TARGET_DEVICES += mir3g + define Device/mt7621 DTS := MT7621 BLOCKSIZE := 64k |