diff options
| -rw-r--r-- | target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts (renamed from target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a42.dts) | 165 | ||||
| -rw-r--r-- | target/linux/ipq40xx/image/Makefile | 2 | ||||
| -rw-r--r-- | target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch | 2 |
3 files changed, 81 insertions, 88 deletions
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a42.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts index 887be993e8..772465cc2e 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a42.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -47,6 +47,14 @@ }; soc { + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -55,75 +63,26 @@ status = "ok"; }; - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; }; + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = <TCSR_ESS_PSGMII>; + }; + tcsr@1957000 { compatible = "qcom,tcsr"; reg = <0x1957000 0x100>; qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; }; - pinctrl@1000000 { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "ok"; - }; - - spi_0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; + usb2: usb2@60f8800 { status = "ok"; - cs-gpios = <&tlmm 54 0>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - /* partitions are passed via bootloader */ - }; }; serial@78af000 { @@ -132,10 +91,6 @@ status = "ok"; }; - cryptobam: dma@8e04000 { - status = "ok"; - }; - crypto@8e3a000 { status = "ok"; }; @@ -144,39 +99,13 @@ status = "ok"; }; - usb2_hs_phy: hsphy@a8000 { - status = "ok"; - }; - - usb2: usb2@60f8800 { - status = "ok"; - }; - - mdio@90000 { - status = "okay"; - }; - ess-switch@c000000 { status = "okay"; }; - ess-psgmii@98000 { - status = "okay"; - }; - edma@c080000 { status = "okay"; }; - - wifi@a000000 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; - }; - - wifi@a800000 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; - }; }; gpio-keys { @@ -227,6 +156,56 @@ }; }; +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "ok"; +}; + +&spi_0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "ok"; + cs-gpios = <&tlmm 54 0>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + /* partitions are passed via bootloader */ + }; +}; + +&cryptobam { + status = "ok"; +}; + &gmac0 { qcom,phy_mdio_addr = <4>; qcom,poll_required = <1>; @@ -242,3 +221,17 @@ qcom,forced_duplex = <1>; vlan_tag = <1 0x10>; }; + +&usb2_hs_phy { + status = "ok"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "OM-A42"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "OM-A42"; +}; diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index e584b6fb1a..eb26082be7 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -61,7 +61,7 @@ TARGET_DEVICES += glinet_gl-b1300 define Device/openmesh_a42 $(call Device/FitImageLzma) - DEVICE_DTS := qcom-ipq4019-a42 + DEVICE_DTS := qcom-ipq4018-a42 BLOCKSIZE := 64k SUPPORTED_DEVICES := openmesh,a42 DEVICE_TITLE := OpenMesh A42 diff --git a/target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch index e830565c84..128669f7c4 100644 --- a/target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-4.14/069-arm-boot-add-dts-files.patch @@ -14,7 +14,7 @@ Signed-off-by: John Crispin <john@phrozen.org> qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ -+ qcom-ipq4019-a42.dtb \ ++ qcom-ipq4018-a42.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \ + qcom-ipq4019-ap.dk04.1-c1.dtb \ + qcom-ipq4019-fritz4040.dtb \ |