diff options
11 files changed, 91 insertions, 156 deletions
diff --git a/package/boot/uboot-envtools/files/ipq b/package/boot/uboot-envtools/files/ipq index b7162807f8..c3ec01efd0 100644 --- a/package/boot/uboot-envtools/files/ipq +++ b/package/boot/uboot-envtools/files/ipq @@ -31,13 +31,14 @@ ubootenv_mtdinfo () { } case "$board" in -ap148 | db149) +qcom,ipq8064-ap148 |\ +qcom,ipq8064-db149) ubootenv_add_uci_config $(ubootenv_mtdinfo) ;; -ea8500) +linksys,ea8500) ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000" ;; -nbg6817) +zyxel,nbg6817) ubootenv_add_uci_config "/dev/mtdblock9" "0x0" "0x10000" "0x10000" ;; esac diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index f9ec88bb34..f0b087f6f6 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -11,37 +11,37 @@ board=$(board_name) boardname="${board##*,}" case "$board" in -c2600) - ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb_2" "usb1-port1" "usb2-port1" - ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1" - ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20" - ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e" +tplink,c2600) + ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1" + ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1" + ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20" + ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e" ;; -d7800 |\ -r7500 |\ -r7500v2 |\ -r7800) - ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb1" "usb1-port1" "usb2-port1" - ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb2" "usb3-port1" "usb4-port1" - ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0" - ucidef_set_led_ide "esata" "eSATA" "${board}:white:esata" +netgear,d7800 |\ +netgear,r7500 |\ +netgear,r7500v2 |\ +netgear,r7800) + ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb1" "usb1-port1" "usb2-port1" + ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb2" "usb3-port1" "usb4-port1" + ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:wan" "eth0" + ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata" ;; -fritz4040) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" "phy1tpt" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "${board}:green:lan" "switch0" "0x1e" +avm,fritzbox-4040) + ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt" + ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1" + ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e" ;; -nbg6817) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:amber:wifi2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:amber:wifi5g" "phy0tpt" - ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1" +zyxel,nbg6817) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt" + ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1" ;; -vr2600v) - ucidef_set_led_usbport "usb" "USB" "${board}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" - ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${board}:white:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${board}:white:wlan5g" "phy1tpt" - ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20" +tplink,vr2600v) + ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" + ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:white:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt" + ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20" ;; *) ;; diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index ad357b7363..8854b9c67d 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -12,25 +12,25 @@ board_config_update board=$(board_name) case "$board" in -ap148 |\ -d7800 |\ -r7500 |\ -r7500v2 |\ -r7800 |\ -vr2600v) +netgear,d7800 |\ +netgear,r7500 |\ +netgear,r7500v2 |\ +netgear,r7800 |\ +qcom,ipq8064-ap148 |\ +tplink,vr2600v) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ;; -c2600) +tplink,c2600) ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" ;; -db149) +qcom,ipq8064-db149) ucidef_set_interface_lan "eth1 eth2 eth3" ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0" ;; -ea8500) +linksys,ea8500) hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) ucidef_add_switch "switch0" \ @@ -38,12 +38,12 @@ ea8500) ucidef_set_interface_macaddr "lan" "$hw_mac_addr" ucidef_set_interface_macaddr "wan" "$hw_mac_addr" ;; -fritz4040) +avm,fritzbox-4040) ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" ;; -nbg6817) +zyxel,nbg6817) hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 4c5b55bc53..dc74df87cc 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -47,20 +47,20 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/pre-cal-ahb-a000000.wifi.bin") case "$board" in - ap-dk01.1-c1) + qcom,ap-dk01.1-c1) ath10kcal_extract "ART" 4096 12064 ;; - fritz4040) + avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") ;; esac ;; "ath10k/pre-cal-ahb-a800000.wifi.bin") case "$board" in - ap-dk01.1-c1) + qcom,ap-dk01.1-c1) ath10kcal_extract "ART" 20480 12064 ;; - fritz4040) + avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") ;; esac @@ -68,46 +68,46 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in - c2600) + tplink,c2600) ath10kcal_extract "radio" 4096 12064 # ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1) ;; - d7800 |\ - r7500v2 |\ - r7800) + netgear,d7800 |\ + netgear,r7500v2 |\ + netgear,r7800) ath10kcal_extract "art" 4096 12064 ;; - ea8500) + linksys,ea8500) hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) ath10kcal_extract "art" 4096 12064 ;; - nbg6817) + zyxel,nbg6817) ath10kcal_extract "0:ART" 4096 12064 ;; - vr2600v) + tplink,vr2600v) ath10kcal_extract "ART" 4096 12064 ;; esac ;; "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in - c2600) + tplink,c2600) ath10kcal_extract "radio" 20480 12064 # ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2) ;; - d7800 |\ - r7500v2 |\ - r7800) + netgear,d7800 |\ + netgear,r7500v2 |\ + netgear,r7800) ath10kcal_extract "art" 20480 12064 ;; - ea8500) + linksys,ea8500) hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) ath10kcal_extract "art" 20480 12064 ;; - nbg6817) + zyxel,nbg6817) ath10kcal_extract "0:ART" 20480 12064 ;; - vr2600v) + tplink,vr2600v) ath10kcal_extract "ART" 20480 12064 ;; esac diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 7884f5117a..207711063c 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -12,21 +12,21 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in - c2600) + tplink,c2600) echo $(macaddr_add $(mtd_get_mac_binary default-mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress ;; - d7800 |\ - r7500v2 |\ - r7800) + netgear,d7800 |\ + netgear,r7500v2 |\ + netgear,r7800) echo $(macaddr_add $(mtd_get_mac_binary art 6) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress ;; - ea8500) + linksys,ea8500) echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress ;; - nbg6817) + zyxel,nbg6817) echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress ;; - vr2600v) + tplink,vr2600v) echo $(macaddr_add $(mtd_get_mac_binary default-mac 0) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress ;; *) diff --git a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery index 4d94f1f767..6b4b38ec7b 100755 --- a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery +++ b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery @@ -6,7 +6,7 @@ boot() { . /lib/functions.sh case $(board_name) in - ea8500) + linksys,ea8500) # make sure auto_recovery in uboot is always on AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`" if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh b/target/linux/ipq806x/base-files/lib/ipq806x.sh deleted file mode 100644 index c4d2c8f258..0000000000 --- a/target/linux/ipq806x/base-files/lib/ipq806x.sh +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2014 The Linux Foundation. All rights reserved. -# Copyright (C) 2011 OpenWrt.org -# - -IPQ806X_BOARD_NAME= -IPQ806X_MODEL= - -ipq806x_board_detect() { - local machine - local name - - machine=$(cat /proc/device-tree/model) - - case "$machine" in - *"AP-DK01.1-C1") - name="ap-dk01.1-c1" - ;; - *"AP148") - name="ap148" - ;; - *"4040") - name="fritz4040" - ;; - *"C2600") - name="c2600" - ;; - *"D7800") - name="d7800" - ;; - *"DB149") - name="db149" - ;; - *"NBG6817") - name="nbg6817" - ;; - *"R7500") - name="r7500" - ;; - *"R7500v2") - name="r7500v2" - ;; - *"Linksys EA8500"*) - name="ea8500" - ;; - *"R7800") - name="r7800" - ;; - *"VR2600v") - name="vr2600v" - ;; - esac - - [ -z "$name" ] && name="unknown" - - [ -z "$IPQ806X_BOARD_NAME" ] && IPQ806X_BOARD_NAME="$name" - [ -z "$IPQ806X_MODEL" ] && IPQ806X_MODEL="$machine" - - [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/" - - echo "$IPQ806X_BOARD_NAME" > /tmp/sysinfo/board_name - echo "$IPQ806X_MODEL" > /tmp/sysinfo/model -} diff --git a/target/linux/ipq806x/base-files/lib/preinit/01_preinit_do_ipq806x.sh b/target/linux/ipq806x/base-files/lib/preinit/01_preinit_do_ipq806x.sh deleted file mode 100644 index 785f1ebb8b..0000000000 --- a/target/linux/ipq806x/base-files/lib/preinit/01_preinit_do_ipq806x.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh -# -# Copyright (c) 2014 The Linux Foundation. All rights reserved. -# - -do_ipq806x() { - . /lib/ipq806x.sh - - ipq806x_board_detect -} - -boot_hook_add preinit_main do_ipq806x diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh index 7d8b178339..dc88c9ed09 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh @@ -10,24 +10,24 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in - ap148 |\ - ap-dk04.1-c1 |\ - d7800 |\ - nbg6817 |\ - r7500 |\ - r7500v2 |\ - r7800) + netgear,d7800 |\ + netgear,r7500 |\ + netgear,r7500v2 |\ + netgear,r7800 |\ + qcom,ap-dk04.1-c1 |\ + qcom,ipq8064-ap148 |\ + zyxel,nbg6817) nand_do_upgrade "$ARGV" ;; - c2600) + tplink,c2600) PART_NAME="os-image:rootfs" MTD_CONFIG_ARGS="-s 0x200000" default_do_upgrade "$ARGV" ;; - ea8500) + linksys,ea8500) platform_do_upgrade_linksys "$ARGV" ;; - vr2600v) + tplink,vr2600v) PART_NAME="kernel:rootfs" MTD_CONFIG_ARGS="-s 0x200000" default_do_upgrade "$ARGV" @@ -40,7 +40,7 @@ platform_do_upgrade() { platform_nand_pre_upgrade() { case "$(board_name)" in - nbg6817) + zyxel,nbg6817) zyxel_do_upgrade "$1" ;; esac diff --git a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh index 7d0ab97356..466d8c616c 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh @@ -74,7 +74,7 @@ zyxel_do_upgrade() { [ -b "${rootfs}" ] || return 1 case "$board" in - nbg6817) + zyxel,nbg6817) case "$rootfs" in "/dev/mmcblk0p5") kernel=mmcblk0p4 diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index afd79439d8..f28f4a3b7a 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -29,7 +29,7 @@ define Device/Default KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs KERNEL_PREFIX := $$(IMAGE_PREFIX) KERNEL_LOADADDR = 0x42208000 - SUPPORTED_DEVICES = $$(BOARD_NAME) + SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) IMAGE/sysupgrade.tar = sysupgrade-tar | append-metadata endef @@ -106,6 +106,7 @@ define Device/qcom_ipq8064-ap148 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := ap148 + SUPPORTED_DEVICES += ap148 DEVICE_TITLE := Qualcomm AP148 DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef @@ -118,6 +119,7 @@ define Device/qcom_ipq8064-ap148-legacy BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := ap148 + SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148 DEVICE_TITLE := Qualcomm AP148 (legacy) DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef @@ -129,6 +131,7 @@ define Device/tplink_c2600 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := c2600 + SUPPORTED_DEVICES += c2600 TPLINK_BOARD_ID := C2600 DEVICE_TITLE := TP-Link Archer C2600 DEVICE_PACKAGES := ath10k-firmware-qca99x0 @@ -144,6 +147,7 @@ define Device/netgear_d7800 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := d7800 + SUPPORTED_DEVICES += d7800 DEVICE_TITLE := Netgear Nighthawk X4 D7800 DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef @@ -169,6 +173,7 @@ define Device/linksys_ea8500 KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr PROFILES += $$(DEVICE_NAME) BOARD_NAME := ea8500 + SUPPORTED_DEVICES += ea8500 UBINIZE_OPTS := -E 5 IMAGES := factory.bin sysupgrade.tar IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi @@ -201,6 +206,7 @@ define Device/netgear_r7500 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := r7500 + SUPPORTED_DEVICES += r7500 DEVICE_TITLE := Netgear Nighthawk X4 R7500 DEVICE_PACKAGES := ath10k-firmware-qca988x endef @@ -215,6 +221,7 @@ define Device/netgear_r7500v2 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := r7500v2 + SUPPORTED_DEVICES += r7500v2 DEVICE_TITLE := Netgear Nighthawk X4 R7500v2 DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x endef @@ -229,6 +236,7 @@ define Device/netgear_r7800 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := r7800 + SUPPORTED_DEVICES += r7800 DEVICE_TITLE := Netgear Nighthawk X4S R7800 DEVICE_PACKAGES := ath10k-firmware-qca9984 endef @@ -239,6 +247,7 @@ define Device/zyxel_nbg6817 KERNEL_SIZE := 4096k BLOCKSIZE := 64k BOARD_NAME := nbg6817 + SUPPORTED_DEVICES += nbg6817 DEVICE_TITLE := ZyXEL NBG6817 DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup $(call Device/ZyXELImage) @@ -256,6 +265,7 @@ define Device/tplink_vr2600v BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := vr2600v + SUPPORTED_DEVICES += vr2600v DEVICE_TITLE := TP-Link Archer VR2600v DEVICE_PACKAGES := ath10k-firmware-qca99x0 IMAGES := sysupgrade.bin |