aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rw-r--r--target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts12
-rw-r--r--target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts12
-rw-r--r--target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts69
-rw-r--r--target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi12
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk10
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c37
9 files changed, 145 insertions, 12 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 592d2cb504..91d5b0d80d 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -141,7 +141,8 @@ tplink,tl-wr842n-v3)
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
tplink,archer-c60-v1|\
-tplink,archer-c60-v2)
+tplink,archer-c60-v2|\
+tplink,archer-c60-v3)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
;;
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 25c39aa3ff..5ca7315d40 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -76,6 +76,7 @@ ath79_setup_interfaces()
tplink,archer-c25-v1|\
tplink,archer-c60-v1|\
tplink,archer-c60-v2|\
+ tplink,archer-c60-v3|\
tplink,tl-mr3220-v1|\
tplink,tl-mr3420-v1|\
tplink,tl-wr841-v7|\
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index cbb50a8fc4..d93e6dcd71 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -202,6 +202,7 @@ case "$FIRMWARE" in
tplink,archer-c59-v1|\
tplink,archer-c60-v1|\
tplink,archer-c60-v2|\
+ tplink,archer-c60-v3|\
tplink,archer-c6-v2)
ath10kcal_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 8) -1)
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts
index 85e456bb44..a83b5881d4 100644
--- a/target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts
@@ -8,6 +8,18 @@
model = "TP-Link Archer C60 v1";
};
+&leds {
+ wan_amber {
+ label = "tp-link:amber:wan";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tp-link:green:wps";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+};
+
&spi {
status = "okay";
num-cs = <1>;
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts
index 29f916734e..c19e4e973d 100644
--- a/target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts
@@ -8,6 +8,18 @@
model = "TP-Link Archer C60 v2";
};
+&leds {
+ wan_amber {
+ label = "tp-link:amber:wan";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tp-link:green:wps";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+};
+
&spi {
status = "okay";
num-cs = <1>;
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts
new file mode 100644
index 0000000000..444d54b000
--- /dev/null
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9561_tplink_archer-c6x.dtsi"
+
+/ {
+ compatible = "tplink,archer-c60-v3", "qca,qca9561";
+ model = "TP-Link Archer C60 v3";
+};
+
+&leds {
+ wan_amber {
+ label = "tp-link:amber:wan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+};
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-boot";
+ reg = <0x000000 0x01fb00>;
+ read-only;
+ };
+
+ mac: partition@1fb00 {
+ label = "mac";
+ reg = <0x01fb00 0x000500>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ partition@30000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x030000 0x7a0000>;
+ };
+
+ partition@7d0000 {
+ label = "tplink";
+ reg = <0x7d0000 0x020000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi b/target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi
index 23ef0cdcbf..6c015fcdd9 100644
--- a/target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi
@@ -33,7 +33,7 @@
};
};
- leds {
+ leds: leds {
compatible = "gpio-leds";
led_power: power {
@@ -59,20 +59,10 @@
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
- wan_amber {
- label = "tp-link:amber:wan";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- };
-
lan {
label = "tp-link:green:lan";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
-
- wps {
- label = "tp-link:green:wps";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
};
};
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 01d3c42acc..b252101a76 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -76,6 +76,16 @@ define Device/tplink_archer-c60-v2
endef
TARGET_DEVICES += tplink_archer-c60-v2
+define Device/tplink_archer-c60-v3
+ $(Device/tplink-safeloader-uimage)
+ ATH_SOC := qca9561
+ IMAGE_SIZE := 7808k
+ DEVICE_TITLE := TP-Link Archer C60 v3
+ TPLINK_BOARD_ID := ARCHER-C60-V3
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9888-ct
+endef
+TARGET_DEVICES += tplink_archer-c60-v3
+
define Device/tplink_archer-c6-v2
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 1c5792f70b..b6ad5c0869 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -799,6 +799,42 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system",
},
+ /** Firmware layout for the C60v3 */
+ {
+ .id = "ARCHER-C60-V3",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
+ "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:3.0.0\n",
+
+ .partitions = {
+ {"factory-boot", 0x00000, 0x1fb00},
+ {"default-mac", 0x1fb00, 0x00200},
+ {"pin", 0x1fd00, 0x00100},
+ {"product-info", 0x1fe00, 0x00100},
+ {"device-id", 0x1ff00, 0x00100},
+ {"fs-uboot", 0x20000, 0x10000},
+ {"firmware", 0x30000, 0x7a0000},
+ {"soft-version", 0x7d9500, 0x00100},
+ {"support-list", 0x7d9600, 0x00100},
+ {"extra-para", 0x7d9700, 0x00100},
+ {"profile", 0x7d9800, 0x03000},
+ {"default-config", 0x7dc800, 0x03000},
+ {"partition-table", 0x7df800, 0x00800},
+ {"user-config", 0x7e0000, 0x0c000},
+ {"certificate", 0x7ec000, 0x04000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the C5 */
{
.id = "ARCHER-C5-V2",
@@ -1835,6 +1871,7 @@ static void build_image(const char *output,
strcasecmp(info->id, "ARCHER-C25-V1") == 0 ||
strcasecmp(info->id, "ARCHER-C59-V2") == 0 ||
strcasecmp(info->id, "ARCHER-C60-V2") == 0 ||
+ strcasecmp(info->id, "ARCHER-C60-V3") == 0 ||
strcasecmp(info->id, "TLWR1043NV5") == 0) {
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
parts[5] = put_data("extra-para", mdat, 11);