diff options
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 79 |
1 files changed, 41 insertions, 38 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 7e5122986c..16e7b6fa13 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -19,15 +19,14 @@ ramips_setup_rt3x5x_vlans() continue fi if [ `swconfig dev rt305x port $port get lan` = "0" ]; then - wanports="$port $wanports" + wanports="$port:wan $wanports" else - lanports="$port $lanports" + lanports="$port:lan $lanports" fi done ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "rt305x" "1" "1" - ucidef_add_switch_vlan "rt305x" "1" "$lanports 6t" - ucidef_add_switch_vlan "rt305x" "2" "$wanports 6t" + ucidef_add_switch_ports "rt305x" $lanports $wanports "6@eth0" } ramips_setup_interfaces() @@ -89,13 +88,14 @@ ramips_setup_interfaces() youku-yk1) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" - ucidef_add_switch_vlan "switch0" "2" "4 6t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; a5-v11) ucidef_set_interface_lan "eth0.1" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 6t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "6t@eth0" ;; ar670w|\ ar725w|\ @@ -103,15 +103,16 @@ ramips_setup_interfaces() wl-351) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t" - ucidef_add_switch_vlan "switch0" "2" "4 5t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" ;; asl26555|\ re6500|\ rp-n53) ucidef_set_interface_lan "eth0.1" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t" + ucidef_add_switch_ports "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" ;; atp-52b|\ awm002-evb|\ @@ -128,14 +129,14 @@ ramips_setup_interfaces() zbt-wa05) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t" - ucidef_add_switch_vlan "switch0" "2" "0 6t" + ucidef_add_switch_ports "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" ;; awapn2403) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 6t" - ucidef_add_switch_vlan "switch0" "2" "1 6t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "1:wan" "6@eth0" ;; b2c|\ nw718|\ @@ -149,19 +150,20 @@ ramips_setup_interfaces() br-6475nd) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t" - ucidef_add_switch_vlan "switch0" "2" "0 9t" + ucidef_add_switch_ports "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" ;; cf-wr800n) ucidef_set_interface_lan "eth0.1" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "4 6t" + ucidef_add_switch_ports "switch0" \ + "4:lan" "6t@eth0" ;; cy-swr1100) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 9t" - ucidef_add_switch_vlan "switch0" "2" "4 9t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0" ;; d105|\ hpm|\ @@ -173,15 +175,15 @@ ramips_setup_interfaces() mt7620a_mt7530) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch1" "1" "1" - ucidef_add_switch_vlan "switch1" "1" "0 1 2 3 6t" - ucidef_add_switch_vlan "switch1" "2" "4 6t" + ucidef_add_switch_ports "switch1" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; hc5*61|\ y1s) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5 6t" - ucidef_add_switch_vlan "switch0" "2" "0 6t" + ucidef_add_switch_ports "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0" ;; m2m) ucidef_add_switch "switch0" "4" @@ -197,51 +199,52 @@ ramips_setup_interfaces() vocore) ucidef_set_interface_lan "eth0.1" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 4 6t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "4:lan" "6t@eth0" ;; rt-n56u) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t" - ucidef_add_switch_vlan "switch0" "2" "4 8t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" ;; tew-691gr|\ tew-692gr) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4" - ucidef_add_switch_vlan "switch0" "2" "0t 5" + ucidef_add_switch_ports "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" ;; v11st-fe|\ wzr-agl300nh) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t" - ucidef_add_switch_vlan "switch0" "2" "0 5t" + ucidef_add_switch_ports "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" ;; wcr-150gn) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 6t" - ucidef_add_switch_vlan "switch0" "2" "6t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "6t@eth0" ;; whr-1166d) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" - ucidef_add_switch_vlan "switch0" "2" "5 6t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0" ;; wizfi630a) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "1 2 6t" - ucidef_add_switch_vlan "switch0" "2" "0 6t" + ucidef_add_switch_ports "switch0" \ + "1:lan" "2:lan" "0:wan" "6@eth0" ;; zbt-wr8305rt) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" - ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 6t" - ucidef_add_switch_vlan "switch0" "2" "4 6t" + ucidef_add_switch_ports "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; *) RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"` |