diff options
| -rw-r--r-- | target/linux/bcm53xx/config-4.14 | 4 | ||||
| -rw-r--r-- | target/linux/bcm53xx/patches-4.14/038-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch | 456 |
2 files changed, 459 insertions, 1 deletions
diff --git a/target/linux/bcm53xx/config-4.14 b/target/linux/bcm53xx/config-4.14 index c9371aca34..e6f578c6dd 100644 --- a/target/linux/bcm53xx/config-4.14 +++ b/target/linux/bcm53xx/config-4.14 @@ -227,9 +227,11 @@ CONFIG_LIBFDT=y CONFIG_LOCK_SPIN_ON_OWNER=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y -# CONFIG_MDIO_BCM_IPROC is not set +CONFIG_MDIO_BCM_IPROC=y CONFIG_MDIO_BUS=y +CONFIG_MDIO_BUS_MUX=y # CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set +CONFIG_MDIO_BUS_MUX_MMIOREG=y CONFIG_MDIO_DEVICE=y CONFIG_MFD_SYSCON=y CONFIG_MIGHT_HAVE_CACHE_L2X0=y diff --git a/target/linux/bcm53xx/patches-4.14/038-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch b/target/linux/bcm53xx/patches-4.14/038-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch new file mode 100644 index 0000000000..226109c09c --- /dev/null +++ b/target/linux/bcm53xx/patches-4.14/038-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch @@ -0,0 +1,456 @@ +From 37f6130ec39fe14e923d472746a51e6f06f761b7 Mon Sep 17 00:00:00 2001 +From: Vivek Unune <npcomplete13@gmail.com> +Date: Mon, 9 Apr 2018 18:31:53 -0400 +Subject: [PATCH] ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Currently, the USB 3.0 PHY in bcm5301x.dtsi uses platform driver which +requires register range "ccb-mii" <0x18003000 0x1000>. This range +overlaps with MDIO cmd and param registers (<0x18003000 0x8>). +Essentially, the platform driver partly acts like a MDIO bus driver, +hence to use of this register range. + +In some Northstar devices like Linksys EA9500, secondary switch is +connected via external MDIO. The only way to access and configure the +external switch is via MDIO bus. When we enable the MDIO bus in it's +current state, the MDIO bus and any child buses fail to register because +of the register range overlap. + +On Northstar, the USB 3.0 PHY is connected at address 0x10 on the +internal MDIO bus. This change moves the usb3_phy node and makes it a +child node of internal MDIO bus. + +Thanks to Rafał Miłecki's commit af850e14a7ae ("phy: bcm-ns-usb3: add +MDIO driver using proper bus layer") the same USB 3.0 platform driver +can now act as USB 3.0 PHY MDIO driver. + +Tested on Linksys Panamera (EA9500) + +Signed-off-by: Vivek Unune <npcomplete13@gmail.com> +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 +++ + arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 +++ + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 +++ + arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 4 +++ + arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 +++ + arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 +++ + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 +++ + arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 +++ + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 +++ + arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 +++ + arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 +++ + arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 +++ + arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 4 +++ + arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 4 +++ + arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 +++ + arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 +++ + arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 +++ + arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 4 +++ + arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 +++ + arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 +++ + arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 +++ + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 +++ + arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 4 +++ + arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +++ + arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +++ + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 +++ + arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 +++ + arch/arm/boot/dts/bcm47094.dtsi | 7 +++-- + arch/arm/boot/dts/bcm5301x.dtsi | 35 +++++++++++++++++----- + arch/arm/boot/dts/bcm94708.dts | 4 +++ + arch/arm/boot/dts/bcm94709.dts | 4 +++ + arch/arm/boot/dts/bcm953012er.dts | 4 +++ + arch/arm/boot/dts/bcm953012hr.dts | 4 +++ + arch/arm/boot/dts/bcm953012k.dts | 4 +++ + 34 files changed, 159 insertions(+), 11 deletions(-) + +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +@@ -90,3 +90,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +@@ -80,3 +80,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -146,3 +146,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts ++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +@@ -38,3 +38,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +@@ -57,3 +57,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -64,3 +64,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -91,3 +91,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +@@ -83,3 +83,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -158,3 +158,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts ++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +@@ -74,3 +74,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -118,3 +118,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +@@ -104,3 +104,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +@@ -57,3 +57,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +@@ -105,3 +105,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts ++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +@@ -99,3 +99,7 @@ + &usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +@@ -62,3 +62,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +@@ -127,3 +127,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts ++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +@@ -39,3 +39,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +@@ -101,3 +101,7 @@ + &usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -182,3 +182,7 @@ + &usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -104,3 +104,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -115,3 +115,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts ++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +@@ -33,3 +33,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +@@ -60,3 +60,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +@@ -60,3 +60,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -100,3 +100,7 @@ + &spi_nor { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts ++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +@@ -91,3 +91,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47094.dtsi ++++ b/arch/arm/boot/dts/bcm47094.dtsi +@@ -7,9 +7,10 @@ + #include "bcm4708.dtsi" + + / { +- usb3_phy: usb3-phy { +- compatible = "brcm,ns-bx-usb3-phy"; +- }; ++}; ++ ++&usb3_phy { ++ compatible = "brcm,ns-bx-usb3-phy"; + }; + + &uart0 { +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -154,13 +154,6 @@ + clock-names = "phy-ref-clk"; + }; + +- usb3_phy: usb3-phy { +- compatible = "brcm,ns-ax-usb3-phy"; +- reg = <0x18105000 0x1000>, <0x18003000 0x1000>; +- reg-names = "dmp", "ccb-mii"; +- #phy-cells = <0>; +- }; +- + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; +@@ -359,7 +352,33 @@ + reg = <0x18003000 0x8>; + #size-cells = <1>; + #address-cells = <0>; +- status = "disabled"; ++ }; ++ ++ mdio-bus-mux { ++ compatible = "mdio-mux-mmioreg"; ++ mdio-parent-bus = <&mdio>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x18003000 0x4>; ++ mux-mask = <0x200>; ++ ++ mdio@0 { ++ reg = <0x0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ usb3_phy: usb3-phy@10 { ++ compatible = "brcm,ns-ax-usb3-phy"; ++ reg = <0x10>; ++ usb3-dmp-syscon = <&usb3_dmp>; ++ #phy-cells = <0>; ++ status = "disabled"; ++ }; ++ }; ++ }; ++ ++ usb3_dmp: syscon@18105000 { ++ reg = <0x18105000 0x1000>; + }; + + i2c0: i2c@18009000 { +--- a/arch/arm/boot/dts/bcm94708.dts ++++ b/arch/arm/boot/dts/bcm94708.dts +@@ -42,3 +42,7 @@ + reg = <0x00000000 0x08000000>; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm94709.dts ++++ b/arch/arm/boot/dts/bcm94709.dts +@@ -42,3 +42,7 @@ + reg = <0x00000000 0x08000000>; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm953012er.dts ++++ b/arch/arm/boot/dts/bcm953012er.dts +@@ -90,3 +90,7 @@ + }; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm953012hr.dts ++++ b/arch/arm/boot/dts/bcm953012hr.dts +@@ -95,3 +95,7 @@ + reg = <0x00700000 0x00900000>; + }; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm953012k.dts ++++ b/arch/arm/boot/dts/bcm953012k.dts +@@ -113,3 +113,7 @@ + &uart1 { + status = "okay"; + }; ++ ++&usb3_phy { ++ status = "okay"; ++}; |