aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/001-kexec_atags.patch122
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/012-velocity_BE.patch928
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch111
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch188
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/020-ixp4xx_i2c_gpio.patch232
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/030-ixp4xx_fsg_board_support.patch793
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch88
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/032-ixp4xx-net-drivers-nas100d.patch87
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/090-increase_entropy_pools.patch17
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/091-nslu2_rtc_fixup.patch56
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/092-nas100d_rtc_fixup.patch56
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/095-dsmg600_rtc_fixup.patch56
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/096-kexec_cmdline.patch179
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/100-gateway7001_mac_plat_info.patch42
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/101-wg302_mac_plat_info.patch32
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/110-pronghorn_metro_support.patch297
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/111-pronghorn_metro_mac_plat_info.patch41
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/120-compex_support.patch189
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/121-compex_mac_plat_info.patch42
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/130-wrt300nv2_support.patch234
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/131-wrt300nv2_mac_plat_info.patch42
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/140-sidewinder_support.patch243
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/150-lanready_ap1000_support.patch217
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/151-lanready_ap1000_mac_plat_info.patch42
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/160-wg302v1_support.patch221
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/161-wg302v1_mac_plat_info.patch32
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/162-wg302v1_mem_fixup.patch49
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/200-npe_driver.patch4044
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/201-npe_driver_print_license_location.patch13
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/202-npe_driver_no_phy.patch42
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/294-eeprom_new_notifier.patch190
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/296-avila_mac_plat_info.patch43
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/298-avila_rtc_fixup.patch56
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/300-avila_fetch_mac.patch72
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/301-avila_led.patch50
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/302-gpio_device.patch49
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/400-dmabounce.patch31
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/401-avila_pci_dev.patch13
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/010-rtc_new_style.patch1032
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/014_ixp4xx_i2c_gpio.patch232
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/015-ixp4xx_update_defconfig.patch1724
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/016-dsmg600_auto_power_on.patch122
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/017-nas100d_auto_power_on.patch194
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_rtc_info.patch119
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/021-ixp4xx_use_leds_gpio.patch239
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch772
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/031-nslu2_nas100d_ethernet_support.patch232
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/032-subsume_power_files.patch819
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/033-velocity_be.patch899
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/090-increase_entropy_pools.patch17
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/100-gateway7001_mac_plat_info.patch42
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/101-wg302_mac_plat_info.patch32
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch297
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/111-pronghorn_metro_mac_plat_info.patch41
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch189
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/121-compex_mac_plat_info.patch42
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch234
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/131-wrt300nv2_mac_plat_info.patch42
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/140-sidewinder_support.patch243
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/150-lanready_ap1000_support.patch208
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/151-lanready_ap1000_mac_plat_info.patch43
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch221
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/161-wg302v1_mac_plat_info.patch32
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/162-wg302v1_mem_fixup.patch49
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/170-ixdpg425_mac_plat_info.patch43
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/180-tw5334_support.patch293
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/190-cambria_support.patch395
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/200-npe_driver.patch4036
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/201-npe_driver_print_license_location.patch13
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/202-npe_driver_switch_support.patch252
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/203-npe_driver_phy_reset_autoneg.patch44
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/204-npe_driver_ixp43x_support.patch90
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/250-compex_switch_support.patch14
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/294-eeprom_new_notifier.patch190
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/296-avila_mac_plat_info.patch45
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/300-avila_fetch_mac.patch229
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/301-avila_led.patch116
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/302-avila_gpio_device.patch45
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/303-avila_gw23x7_phy_quirk.patch52
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/400-dmabounce.patch31
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/401-avila_pci_dev.patch13
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/402-ixp4xx_ehci_backport.patch220
-rw-r--r--target/linux/ixp4xx/patches-2.6.24/900-include_bitops_h_from_arch_io_h.patch13
-rw-r--r--target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch551
-rw-r--r--target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch131
-rw-r--r--target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch196
-rw-r--r--target/linux/ixp4xx/patches/100-npe_driver.patch4878
-rw-r--r--target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch17
-rw-r--r--target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch392
-rw-r--r--target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch74
-rw-r--r--target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch42
-rw-r--r--target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch41
-rw-r--r--target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch35
-rw-r--r--target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch34
-rw-r--r--target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch56
-rw-r--r--target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch56
-rw-r--r--target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch49
-rw-r--r--target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch927
-rw-r--r--target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch54
-rw-r--r--target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch55
-rw-r--r--target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch57
-rw-r--r--target/linux/ixp4xx/patches/200-gateway_7001.patch256
-rw-r--r--target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch63
-rw-r--r--target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch69
-rw-r--r--target/linux/ixp4xx/patches/300-wg302v2.patch236
-rw-r--r--target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch38
-rw-r--r--target/linux/ixp4xx/patches/400-pronghorn_metro.patch257
-rw-r--r--target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch62
-rw-r--r--target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch56
-rw-r--r--target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch58
-rw-r--r--target/linux/ixp4xx/patches/500-compex.patch189
-rw-r--r--target/linux/ixp4xx/patches/510-compex_setup_mac.patch63
-rw-r--r--target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch56
-rw-r--r--target/linux/ixp4xx/patches/600-wrt300nv2.patch234
-rw-r--r--target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch63
-rw-r--r--target/linux/ixp4xx/patches/720-avila_setup_mac.patch70
-rw-r--r--target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch50
-rw-r--r--target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch29
-rw-r--r--target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch201
-rw-r--r--target/linux/ixp4xx/patches/900-no_loader_workaround.patch20
-rw-r--r--target/linux/ixp4xx/patches/996-fsg3_support.patch433
-rw-r--r--target/linux/ixp4xx/patches/997-fsg3_buttons.patch191
-rw-r--r--target/linux/ixp4xx/patches/998-VT6421.patch21
123 files changed, 0 insertions, 33849 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.23/001-kexec_atags.patch b/target/linux/ixp4xx/patches-2.6.23/001-kexec_atags.patch
deleted file mode 100644
index f4f60c9494..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/001-kexec_atags.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/kernel/relocate_kernel.S
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/kernel/relocate_kernel.S
-+++ linux-2.6.23.17/arch/arm/kernel/relocate_kernel.S
-@@ -7,6 +7,23 @@
- .globl relocate_new_kernel
- relocate_new_kernel:
-
-+ /* Move boot params back to where the kernel expects them */
-+
-+ ldr r0,kexec_boot_params_address
-+ teq r0,#0
-+ beq 8f
-+
-+ ldr r1,kexec_boot_params_copy
-+ mov r6,#KEXEC_BOOT_PARAMS_SIZE/4
-+7:
-+ ldr r5,[r1],#4
-+ str r5,[r0],#4
-+ subs r6,r6,#1
-+ bne 7b
-+
-+8:
-+ /* Boot params moved, now go on with the kernel */
-+
- ldr r0,kexec_indirection_page
- ldr r1,kexec_start_address
-
-@@ -50,7 +67,7 @@ relocate_new_kernel:
- mov lr,r1
- mov r0,#0
- ldr r1,kexec_mach_type
-- mov r2,#0
-+ ldr r2,kexec_boot_params_address
- mov pc,lr
-
- .globl kexec_start_address
-@@ -65,6 +82,16 @@ kexec_indirection_page:
- kexec_mach_type:
- .long 0x0
-
-+ /* phy addr where new kernel will expect to find boot params */
-+ .globl kexec_boot_params_address
-+kexec_boot_params_address:
-+ .long 0x0
-+
-+ /* phy addr where old kernel put a copy of orig boot params */
-+ .globl kexec_boot_params_copy
-+kexec_boot_params_copy:
-+ .long 0x0
-+
- relocate_new_kernel_end:
-
- .globl relocate_new_kernel_size
-Index: linux-2.6.23.17/arch/arm/kernel/setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/kernel/setup.c
-+++ linux-2.6.23.17/arch/arm/kernel/setup.c
-@@ -24,6 +24,7 @@
- #include <linux/interrupt.h>
- #include <linux/smp.h>
- #include <linux/fs.h>
-+#include <linux/kexec.h>
-
- #include <asm/cpu.h>
- #include <asm/elf.h>
-@@ -770,6 +771,23 @@ static int __init customize_machine(void
- }
- arch_initcall(customize_machine);
-
-+#ifdef CONFIG_KEXEC
-+
-+/* Physical addr of where the boot params should be for this machine */
-+extern unsigned long kexec_boot_params_address;
-+
-+/* Physical addr of the buffer into which the boot params are copied */
-+extern unsigned long kexec_boot_params_copy;
-+
-+/* Pointer to the boot params buffer, for manipulation and display */
-+unsigned long kexec_boot_params;
-+EXPORT_SYMBOL(kexec_boot_params);
-+
-+/* The buffer itself - make sure it is sized correctly */
-+static unsigned long kexec_boot_params_buf[(KEXEC_BOOT_PARAMS_SIZE + 3) / 4];
-+
-+#endif
-+
- void __init setup_arch(char **cmdline_p)
- {
- struct tag *tags = (struct tag *)&init_tags;
-@@ -788,6 +806,18 @@ void __init setup_arch(char **cmdline_p)
- else if (mdesc->boot_params)
- tags = phys_to_virt(mdesc->boot_params);
-
-+#ifdef CONFIG_KEXEC
-+ kexec_boot_params_copy = virt_to_phys(kexec_boot_params_buf);
-+ kexec_boot_params = (unsigned long)kexec_boot_params_buf;
-+ if (__atags_pointer) {
-+ kexec_boot_params_address = __atags_pointer;
-+ memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
-+ } else if (mdesc->boot_params) {
-+ kexec_boot_params_address = mdesc->boot_params;
-+ memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
-+ }
-+#endif
-+
- /*
- * If we have the old style parameters, convert them to
- * a tag list.
-Index: linux-2.6.23.17/include/asm-arm/kexec.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/kexec.h
-+++ linux-2.6.23.17/include/asm-arm/kexec.h
-@@ -14,6 +14,8 @@
-
- #define KEXEC_ARCH KEXEC_ARCH_ARM
-
-+#define KEXEC_BOOT_PARAMS_SIZE 1536
-+
- #ifndef __ASSEMBLY__
-
- struct kimage;
diff --git a/target/linux/ixp4xx/patches-2.6.23/012-velocity_BE.patch b/target/linux/ixp4xx/patches-2.6.23/012-velocity_BE.patch
deleted file mode 100644
index 40a7215dcc..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/012-velocity_BE.patch
+++ /dev/null
@@ -1,928 +0,0 @@
-Index: linux-2.6.23.17/drivers/net/via-velocity.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/via-velocity.c
-+++ linux-2.6.23.17/drivers/net/via-velocity.c
-@@ -96,11 +96,31 @@ MODULE_AUTHOR("VIA Networking Technologi
- MODULE_LICENSE("GPL");
- MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
-
-+/* Valid values for vdebug (additive, this is a bitmask):
-+ * 0x00 => off
-+ * 0x01 => always on
-+ * 0x02 => additional detail on tx (rx, too, if anyone implements same)
-+ * 0x04 => detail the initialization process
-+ * 0x08 => spot debug detail; to be used as developers see fit
-+ */
-+static int vdebug = 0;
-+
-+/* HAIL - these macros are for the normal 0x01-type tracing... */
-+#define HAIL(S) \
-+ if (vdebug&1) printk(KERN_NOTICE "%s\n", (S));
-+#define HAILS(S,T) \
-+ if (vdebug&1) printk(KERN_NOTICE "%s -> status=0x%x\n", (S), (T));
-+
- #define VELOCITY_PARAM(N,D) \
- static int N[MAX_UNITS]=OPTION_DEFAULT;\
- module_param_array(N, int, NULL, 0); \
- MODULE_PARM_DESC(N, D);
-
-+#define VELO_DEBUG_MIN 0
-+#define VELO_DEBUG_MAX 255
-+#define VELO_DEBUG_DEF 0
-+VELOCITY_PARAM(velo_debug, "Debug level");
-+
- #define RX_DESC_MIN 64
- #define RX_DESC_MAX 255
- #define RX_DESC_DEF 64
-@@ -385,12 +405,12 @@ static void __devinit velocity_set_int_o
- if (val == -1)
- *opt = def;
- else if (val < min || val > max) {
-- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
-- devname, name, min, max);
-+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
-+ name, min, max);
- *opt = def;
- } else {
-- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
-- devname, name, val);
-+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "via-velocity: set value of parameter %s to %d\n",
-+ name, val);
- *opt = val;
- }
- }
-@@ -415,12 +435,12 @@ static void __devinit velocity_set_bool_
- if (val == -1)
- *opt |= (def ? flag : 0);
- else if (val < 0 || val > 1) {
-- printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
-- devname, name);
-+ printk(KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (0-1)\n",
-+ name);
- *opt |= (def ? flag : 0);
- } else {
-- printk(KERN_INFO "%s: set parameter %s to %s\n",
-- devname, name, val ? "TRUE" : "FALSE");
-+ printk(KERN_INFO "via-velocity: set parameter %s to %s\n",
-+ name, val ? "TRUE" : "FALSE");
- *opt |= (val ? flag : 0);
- }
- }
-@@ -438,6 +458,7 @@ static void __devinit velocity_set_bool_
- static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname)
- {
-
-+ velocity_set_int_opt(&opts->velo_debug, velo_debug[index], VELO_DEBUG_MIN, VELO_DEBUG_MAX, VELO_DEBUG_DEF, "velo_debug", devname);
- velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
- velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
- velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
-@@ -452,6 +473,7 @@ static void __devinit velocity_get_optio
- velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
- velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname);
- opts->numrx = (opts->numrx & ~3);
-+ vdebug = opts->velo_debug;
- }
-
- /**
-@@ -466,6 +488,8 @@ static void velocity_init_cam_filter(str
- {
- struct mac_regs __iomem * regs = vptr->mac_regs;
-
-+ HAIL("velocity_init_cam_filter");
-+
- /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
- WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, &regs->MCFG);
- WORD_REG_BITS_ON(MCFG_VIDFR, &regs->MCFG);
-@@ -484,14 +508,12 @@ static void velocity_init_cam_filter(str
- WORD_REG_BITS_ON(MCFG_RTGOPT, &regs->MCFG);
-
- mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM);
-- vptr->vCAMmask[0] |= 1;
-- mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
- } else {
- u16 temp = 0;
- mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
-- temp = 1;
-- mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
- }
-+ vptr->vCAMmask[0] |= 1;
-+ mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
- }
-
- /**
-@@ -508,13 +530,15 @@ static void velocity_rx_reset(struct vel
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i;
-
-+ HAIL("velocity_rx_reset");
- vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
-
- /*
- * Init state, all RD entries belong to the NIC
- */
- for (i = 0; i < vptr->options.numrx; ++i)
-- vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC;
-+ /* vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; BE */
-+ vptr->rd_ring[i].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
-
- writew(vptr->options.numrx, &regs->RBRDU);
- writel(vptr->rd_pool_dma, &regs->RDBaseLo);
-@@ -537,12 +561,15 @@ static void velocity_init_registers(stru
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i, mii_status;
-
-+ if (vdebug&5) printk(KERN_NOTICE "velocity_init_registers: entering\n");
-+
- mac_wol_reset(regs);
-
- switch (type) {
- case VELOCITY_INIT_RESET:
- case VELOCITY_INIT_WOL:
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: RESET or WOL\n");
- netif_stop_queue(vptr->dev);
-
- /*
-@@ -570,12 +597,13 @@ static void velocity_init_registers(stru
-
- case VELOCITY_INIT_COLD:
- default:
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: COLD or default\n");
- /*
- * Do reset
- */
- velocity_soft_reset(vptr);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: soft reset complete.\n");
- mdelay(5);
--
- mac_eeprom_reload(regs);
- for (i = 0; i < 6; i++) {
- writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
-@@ -593,11 +621,16 @@ static void velocity_init_registers(stru
- */
- BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), &regs->CFGB);
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Initializing CAM filter\n");
- /*
- * Init CAM filter
- */
-+ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: about to init CAM filters\n");
-+ mdelay(5); /* MJW - ARM processors, kernel 2.6.19 - this fixes oopses and hangs */
- velocity_init_cam_filter(vptr);
-+ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: init CAM filters complete\n");
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Setting packet filter\n");
- /*
- * Set packet filter: Receive directed and broadcast address
- */
-@@ -607,10 +640,12 @@ static void velocity_init_registers(stru
- * Enable MII auto-polling
- */
- enable_mii_autopoll(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: enable_mii_autopoll complete.\n");
-
- vptr->int_mask = INT_MASK_DEF;
-
-- writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo);
-+ /* writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo); BE */
-+ writel((vptr->rd_pool_dma), &regs->RDBaseLo); /* BE */
- writew(vptr->options.numrx - 1, &regs->RDCSize);
- mac_rx_queue_run(regs);
- mac_rx_queue_wake(regs);
-@@ -618,10 +653,13 @@ static void velocity_init_registers(stru
- writew(vptr->options.numtx - 1, &regs->TDCSize);
-
- for (i = 0; i < vptr->num_txq; i++) {
-- writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i]));
-+ /* writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); BE */
-+ writel((vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); /* BE */
- mac_tx_queue_run(regs, i);
- }
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: DMA settings complete.\n");
-+
- init_flow_control_register(vptr);
-
- writel(CR0_STOP, &regs->CR0Clr);
-@@ -640,8 +678,10 @@ static void velocity_init_registers(stru
-
- enable_flow_control_ability(vptr);
- mac_hw_mibs_init(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Set interrupt mask\n");
- mac_write_int_mask(vptr->int_mask, regs);
- mac_clear_isr(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: complete.\n");
-
- }
- }
-@@ -659,6 +699,7 @@ static int velocity_soft_reset(struct ve
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i = 0;
-
-+ HAIL("velocity_soft_reset");
- writel(CR0_SFRST, &regs->CR0Set);
-
- for (i = 0; i < W_MAX_TIMEOUT; i++) {
-@@ -722,6 +763,7 @@ static int __devinit velocity_found1(str
- VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
- printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
- printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
-+ printk(KERN_INFO "BE support, misc. fixes MJW 01Jan2007 - may be unstable\n");
- first = 0;
- }
-
-@@ -934,6 +976,7 @@ static int velocity_init_rings(struct ve
- dma_addr_t pool_dma;
- u8 *pool;
-
-+ HAIL("velocity_init_rings");
- /*
- * Allocate all RD/TD rings a single pool
- */
-@@ -996,6 +1039,7 @@ static int velocity_init_rings(struct ve
- static void velocity_free_rings(struct velocity_info *vptr)
- {
- int size;
-+ HAIL("velocity_free_rings");
-
- size = vptr->options.numrx * sizeof(struct rx_desc) +
- vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
-@@ -1012,6 +1056,7 @@ static inline void velocity_give_many_rx
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int avail, dirty, unusable;
-
-+ HAIL("velocity_give_many_rx_descs");
- /*
- * RD number must be equal to 4X per hardware spec
- * (programming guide rev 1.20, p.13)
-@@ -1025,7 +1070,8 @@ static inline void velocity_give_many_rx
- dirty = vptr->rd_dirty - unusable;
- for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
- dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
-- vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC;
-+ /* vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; BE */
-+ vptr->rd_ring[dirty].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
- }
-
- writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
-@@ -1035,12 +1081,14 @@ static inline void velocity_give_many_rx
- static int velocity_rx_refill(struct velocity_info *vptr)
- {
- int dirty = vptr->rd_dirty, done = 0, ret = 0;
-+ HAIL("velocity_rx_refill");
-
- do {
- struct rx_desc *rd = vptr->rd_ring + dirty;
-
- /* Fine for an all zero Rx desc at init time as well */
-- if (rd->rdesc0.owner == OWNED_BY_NIC)
-+ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
-+ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- if (!vptr->rd_info[dirty].skb) {
-@@ -1075,6 +1123,7 @@ static int velocity_init_rd_ring(struct
- unsigned int rsize = sizeof(struct velocity_rd_info) *
- vptr->options.numrx;
-
-+ HAIL("velocity_init_rd_ring");
- vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
- if(vptr->rd_info == NULL)
- goto out;
-@@ -1104,6 +1153,7 @@ static void velocity_free_rd_ring(struct
- {
- int i;
-
-+ HAIL("velocity_free_rd_ring");
- if (vptr->rd_info == NULL)
- return;
-
-@@ -1145,6 +1195,7 @@ static int velocity_init_td_ring(struct
- unsigned int tsize = sizeof(struct velocity_td_info) *
- vptr->options.numtx;
-
-+ HAIL("velocity_init_td_ring");
- /* Init the TD ring entries */
- for (j = 0; j < vptr->num_txq; j++) {
- curr = vptr->td_pool_dma[j];
-@@ -1181,6 +1232,7 @@ static void velocity_free_td_ring_entry(
- struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
- int i;
-
-+ HAIL("velocity_free_td_ring_entry");
- if (td_info == NULL)
- return;
-
-@@ -1210,6 +1262,7 @@ static void velocity_free_td_ring(struct
- {
- int i, j;
-
-+ HAIL("velocity_free_td_ring");
- for (j = 0; j < vptr->num_txq; j++) {
- if (vptr->td_infos[j] == NULL)
- continue;
-@@ -1237,34 +1290,42 @@ static int velocity_rx_srv(struct veloci
- struct net_device_stats *stats = &vptr->stats;
- int rd_curr = vptr->rd_curr;
- int works = 0;
-+ u16 wRSR; /* BE */
-
-+ HAILS("velocity_rx_srv", status);
- do {
- struct rx_desc *rd = vptr->rd_ring + rd_curr;
-
- if (!vptr->rd_info[rd_curr].skb)
- break;
-
-- if (rd->rdesc0.owner == OWNED_BY_NIC)
-+ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
-+ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- rmb();
-
-+ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
- /*
- * Don't drop CE or RL error frame although RXOK is off
- */
-- if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) {
-+ /* if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { BE */
-+ if ((wRSR & RSR_RXOK) || (!(wRSR & RSR_RXOK) && (wRSR & (RSR_CE | RSR_RL)))) { /* BE */
- if (velocity_receive_frame(vptr, rd_curr) < 0)
- stats->rx_dropped++;
- } else {
-- if (rd->rdesc0.RSR & RSR_CRC)
-+ /* if (rd->rdesc0.RSR & RSR_CRC) BE */
-+ if (wRSR & RSR_CRC) /* BE */
- stats->rx_crc_errors++;
-- if (rd->rdesc0.RSR & RSR_FAE)
-+ /* if (rd->rdesc0.RSR & RSR_FAE) BE */
-+ if (wRSR & RSR_FAE) /* BE */
- stats->rx_frame_errors++;
-
- stats->rx_dropped++;
- }
-
-- rd->inten = 1;
-+ /* rd->inten = 1; BE */
-+ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
-
- vptr->dev->last_rx = jiffies;
-
-@@ -1295,13 +1356,21 @@ static int velocity_rx_srv(struct veloci
-
- static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
- {
-+ u8 bCSM;
-+ HAIL("velocity_rx_csum");
- skb->ip_summed = CHECKSUM_NONE;
-
-- if (rd->rdesc1.CSM & CSM_IPKT) {
-- if (rd->rdesc1.CSM & CSM_IPOK) {
-- if ((rd->rdesc1.CSM & CSM_TCPKT) ||
-- (rd->rdesc1.CSM & CSM_UDPKT)) {
-- if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
-+// if (rd->rdesc1.CSM & CSM_IPKT) {
-+// if (rd->rdesc1.CSM & CSM_IPOK) {
-+// if ((rd->rdesc1.CSM & CSM_TCPKT) ||
-+// (rd->rdesc1.CSM & CSM_UDPKT)) {
-+// if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
-+ bCSM = (u8)(cpu_to_le32(rd->rdesc1) >> 16); /* BE */
-+ if (bCSM & CSM_IPKT) {
-+ if (bCSM & CSM_IPOK) {
-+ if ((bCSM & CSM_TCPKT) ||
-+ (bCSM & CSM_UDPKT)) {
-+ if (!(bCSM & CSM_TUPOK)) { /* BE */
- return;
- }
- }
-@@ -1327,9 +1396,11 @@ static inline int velocity_rx_copy(struc
- {
- int ret = -1;
-
-+ HAIL("velocity_rx_copy");
- if (pkt_size < rx_copybreak) {
- struct sk_buff *new_skb;
-
-+ HAIL("velocity_rx_copy (working...)");
- new_skb = dev_alloc_skb(pkt_size + 2);
- if (new_skb) {
- new_skb->dev = vptr->dev;
-@@ -1360,10 +1431,12 @@ static inline int velocity_rx_copy(struc
- static inline void velocity_iph_realign(struct velocity_info *vptr,
- struct sk_buff *skb, int pkt_size)
- {
-+ HAIL("velocity_iph_realign");
- /* FIXME - memmove ? */
- if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
- int i;
-
-+ HAIL("velocity_iph_realign (working...)");
- for (i = pkt_size; i >= 0; i--)
- *(skb->data + i + 2) = *(skb->data + i);
- skb_reserve(skb, 2);
-@@ -1382,19 +1455,27 @@ static inline void velocity_iph_realign(
- static int velocity_receive_frame(struct velocity_info *vptr, int idx)
- {
- void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
-+ u16 pkt_len; /* BE */
-+ u16 wRSR; /* BE */
-+ struct sk_buff *skb;
- struct net_device_stats *stats = &vptr->stats;
- struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
- struct rx_desc *rd = &(vptr->rd_ring[idx]);
-- int pkt_len = rd->rdesc0.len;
-- struct sk_buff *skb;
-+ /* int pkt_len = rd->rdesc0.len BE */;
-+
-+ pkt_len = ((cpu_to_le32(rd->rdesc0) >> 16) & 0x00003FFFUL); /* BE */
-+ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
-
-- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
-+ HAIL("velocity_receive_frame");
-+ /* if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { BE */
-+ if (wRSR & (RSR_STP | RSR_EDP)) { /* BE */
- VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
- stats->rx_length_errors++;
- return -EINVAL;
- }
-
-- if (rd->rdesc0.RSR & RSR_MAR)
-+ /* if (rd->rdesc0.RSR & RSR_MAR) BE */
-+ if (wRSR & RSR_MAR) /* BE */
- vptr->stats.multicast++;
-
- skb = rd_info->skb;
-@@ -1407,7 +1488,8 @@ static int velocity_receive_frame(struct
- */
-
- if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
-- if (rd->rdesc0.RSR & RSR_RL) {
-+ /* if (rd->rdesc0.RSR & RSR_RL) { BE */
-+ if (wRSR & RSR_RL) { /* BE */
- stats->rx_length_errors++;
- return -EINVAL;
- }
-@@ -1451,6 +1533,7 @@ static int velocity_alloc_rx_buf(struct
- struct rx_desc *rd = &(vptr->rd_ring[idx]);
- struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
-
-+ HAIL("velocity_alloc_rx_buf");
- rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64);
- if (rd_info->skb == NULL)
- return -ENOMEM;
-@@ -1468,10 +1551,14 @@ static int velocity_alloc_rx_buf(struct
- */
-
- *((u32 *) & (rd->rdesc0)) = 0;
-- rd->len = cpu_to_le32(vptr->rx_buf_sz);
-- rd->inten = 1;
-+ /* rd->len = cpu_to_le32(vptr->rx_buf_sz); BE */
-+ /* rd->inten = 1; BE */
- rd->pa_low = cpu_to_le32(rd_info->skb_dma);
-- rd->pa_high = 0;
-+ /* rd->pa_high = 0; BE */
-+ rd->ltwo &= cpu_to_le32(0xC000FFFFUL); /* BE */
-+ rd->ltwo |= cpu_to_le32((vptr->rx_buf_sz << 16)); /* BE */
-+ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
-+ rd->ltwo &= cpu_to_le32(0xFFFF0000UL); /* BE */
- return 0;
- }
-
-@@ -1492,9 +1579,11 @@ static int velocity_tx_srv(struct veloci
- int full = 0;
- int idx;
- int works = 0;
-+ u16 wTSR; /* BE */
- struct velocity_td_info *tdinfo;
- struct net_device_stats *stats = &vptr->stats;
-
-+ HAILS("velocity_tx_srv", status);
- for (qnum = 0; qnum < vptr->num_txq; qnum++) {
- for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
- idx = (idx + 1) % vptr->options.numtx) {
-@@ -1505,22 +1594,29 @@ static int velocity_tx_srv(struct veloci
- td = &(vptr->td_rings[qnum][idx]);
- tdinfo = &(vptr->td_infos[qnum][idx]);
-
-- if (td->tdesc0.owner == OWNED_BY_NIC)
-+ /* if (td->tdesc0.owner == OWNED_BY_NIC) BE */
-+ if (td->tdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- if ((works++ > 15))
- break;
-
-- if (td->tdesc0.TSR & TSR0_TERR) {
-+ wTSR = (u16)cpu_to_le32(td->tdesc0);
-+ /* if (td->tdesc0.TSR & TSR0_TERR) { BE */
-+ if (wTSR & TSR0_TERR) { /* BE */
- stats->tx_errors++;
- stats->tx_dropped++;
-- if (td->tdesc0.TSR & TSR0_CDH)
-+ /* if (td->tdesc0.TSR & TSR0_CDH) BE */
-+ if (wTSR & TSR0_CDH) /* BE */
- stats->tx_heartbeat_errors++;
-- if (td->tdesc0.TSR & TSR0_CRS)
-+ /* if (td->tdesc0.TSR & TSR0_CRS) BE */
-+ if (wTSR & TSR0_CRS) /* BE */
- stats->tx_carrier_errors++;
-- if (td->tdesc0.TSR & TSR0_ABT)
-+ /* if (td->tdesc0.TSR & TSR0_ABT) BE */
-+ if (wTSR & TSR0_ABT) /* BE */
- stats->tx_aborted_errors++;
-- if (td->tdesc0.TSR & TSR0_OWC)
-+ /* if (td->tdesc0.TSR & TSR0_OWC) BE */
-+ if (wTSR & TSR0_OWC) /* BE */
- stats->tx_window_errors++;
- } else {
- stats->tx_packets++;
-@@ -1609,6 +1705,7 @@ static void velocity_print_link_status(s
-
- static void velocity_error(struct velocity_info *vptr, int status)
- {
-+ HAILS("velocity_error", status);
-
- if (status & ISR_TXSTLI) {
- struct mac_regs __iomem * regs = vptr->mac_regs;
-@@ -1698,6 +1795,7 @@ static void velocity_free_tx_buf(struct
- struct sk_buff *skb = tdinfo->skb;
- int i;
-
-+ HAIL("velocity_free_tx_buf");
- /*
- * Don't unmap the pre-allocated tx_bufs
- */
-@@ -1901,6 +1999,7 @@ static int velocity_xmit(struct sk_buff
- struct velocity_td_info *tdinfo;
- unsigned long flags;
- int index;
-+ u32 lbufsz; /* BE */
-
- int pktlen = skb->len;
-
-@@ -1917,9 +2016,18 @@ static int velocity_xmit(struct sk_buff
- td_ptr = &(vptr->td_rings[qnum][index]);
- tdinfo = &(vptr->td_infos[qnum][index]);
-
-- td_ptr->tdesc1.TCPLS = TCPLS_NORMAL;
-- td_ptr->tdesc1.TCR = TCR0_TIC;
-- td_ptr->td_buf[0].queue = 0;
-+ td_ptr->tdesc0 = 0x00000000UL; /* BE */
-+ td_ptr->tdesc1 = 0x00000000UL; /* BE */
-+
-+ /* td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0xfcffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)TCPLS_NORMAL) << 24); /* BE */
-+
-+ /* td_ptr->tdesc1.TCR = TCR0_TIC; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TIC); /* BE */
-+
-+ /* td_ptr->td_buf[0].queue = 0; BE */
-+ td_ptr->td_buf[0].ltwo &= cpu_to_le32(~BE_QUEUE_ENABLE); /* BE */
-
- /*
- * Pad short frames.
-@@ -1931,20 +2039,36 @@ static int velocity_xmit(struct sk_buff
- memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len);
- tdinfo->skb = skb;
- tdinfo->skb_dma[0] = tdinfo->buf_dma;
-- td_ptr->tdesc0.pktsize = pktlen;
-+ /* td_ptr->tdesc0.pktsize = pktlen; */
-+ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
-+ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
-+ lbufsz = lbufsz << 16; /* BE - shift over */
-+ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
-+
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-- td_ptr->td_buf[0].pa_high = 0;
-- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
-+ /* td_ptr->td_buf[0].pa_high = 0; */
-+ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; */
-+ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */
- tdinfo->nskb_dma = 1;
-- td_ptr->tdesc1.CMDZ = 2;
-+ /* td_ptr->tdesc1.CMDZ = 2; */
-+ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28); /* BE */
- } else
- #ifdef VELOCITY_ZERO_COPY_SUPPORT
-+ /*
-+ * BE - NOTE on the VELOCITY_ZERO_COPY_SUPPORT:
-+ * This block of code has NOT been patched up for BE support, as
-+ * it is certainly broken -- if it compiles at all. Since the BE
-+ * fixes depend on the broken code, attempts to convert to BE support
-+ * would almost certainly confuse more than help.
-+ */
- if (skb_shinfo(skb)->nr_frags > 0) {
- int nfrags = skb_shinfo(skb)->nr_frags;
- tdinfo->skb = skb;
- if (nfrags > 6) {
- skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
- tdinfo->skb_dma[0] = tdinfo->buf_dma;
-+ /* BE: Er, exactly what value are we assigning in this next line? */
- td_ptr->tdesc0.pktsize =
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
- td_ptr->td_buf[0].pa_high = 0;
-@@ -1961,6 +2085,7 @@ static int velocity_xmit(struct sk_buff
- /* FIXME: support 48bit DMA later */
- td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
- td_ptr->td_buf[i].pa_high = 0;
-+ /* BE: This next line can't be right: */
- td_ptr->td_buf[i].bufsize = skb->len->skb->data_len;
-
- for (i = 0; i < nfrags; i++) {
-@@ -1978,7 +2103,7 @@ static int velocity_xmit(struct sk_buff
- }
-
- } else
--#endif
-+#endif /* (broken) VELOCITY_ZERO_COPY_SUPPORT */
- {
- /*
- * Map the linear network buffer into PCI space and
-@@ -1986,19 +2111,30 @@ static int velocity_xmit(struct sk_buff
- */
- tdinfo->skb = skb;
- tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
-- td_ptr->tdesc0.pktsize = pktlen;
-+ /* td_ptr->tdesc0.pktsize = pktlen; BE */
-+ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
-+ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
-+ lbufsz = lbufsz << 16; /* BE */
-+ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-- td_ptr->td_buf[0].pa_high = 0;
-- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
-+ /* td_ptr->td_buf[0].pa_high = 0; BE */
-+ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; BE */
-+ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */
-+
- tdinfo->nskb_dma = 1;
-- td_ptr->tdesc1.CMDZ = 2;
-+ /* td_ptr->tdesc1.CMDZ = 2; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28);/* BE */
- }
-
- if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
-- td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff);
-- td_ptr->tdesc1.pqinf.priority = 0;
-- td_ptr->tdesc1.pqinf.CFI = 0;
-- td_ptr->tdesc1.TCR |= TCR0_VETAG;
-+ /* td_ptr->tdesc1.pqinf.priority = 0; BE */
-+ /* td_ptr->tdesc1.pqinf.CFI = 0; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0xFFFF0000UL); /* BE */
-+ /* td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); BE */
-+ td_ptr->tdesc1 |= cpu_to_le32((vptr->options.vid & 0xfff)); /* BE */
-+ /* td_ptr->tdesc1.TCR |= TCR0_VETAG; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_VETAG); /* BE */
- }
-
- /*
-@@ -2008,26 +2144,34 @@ static int velocity_xmit(struct sk_buff
- && (skb->ip_summed == CHECKSUM_PARTIAL)) {
- const struct iphdr *ip = ip_hdr(skb);
- if (ip->protocol == IPPROTO_TCP)
-- td_ptr->tdesc1.TCR |= TCR0_TCPCK;
-+ /* td_ptr->tdesc1.TCR |= TCR0_TCPCK; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TCPCK); /* BE */
- else if (ip->protocol == IPPROTO_UDP)
-- td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
-- td_ptr->tdesc1.TCR |= TCR0_IPCK;
-- }
-+ /* td_ptr->tdesc1.TCR |= (TCR0_UDPCK); BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_UDPCK); /* BE */
-+ /* td_ptr->tdesc1.TCR |= TCR0_IPCK; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_IPCK); /* BE */
-+ }
- {
-
- int prev = index - 1;
-
- if (prev < 0)
- prev = vptr->options.numtx - 1;
-- td_ptr->tdesc0.owner = OWNED_BY_NIC;
-+ /* td_ptr->tdesc0.owner = OWNED_BY_NIC; BE */
-+ td_ptr->tdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
- vptr->td_used[qnum]++;
- vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
-
- if (AVAIL_TD(vptr, qnum) < 1)
- netif_stop_queue(dev);
-
-- td_ptr = &(vptr->td_rings[qnum][prev]);
-- td_ptr->td_buf[0].queue = 1;
-+ td_ptr = &(vptr->td_rings[qnum][prev]);
-+ /* td_ptr->td_buf[0].queue = 1; BE */
-+ td_ptr->td_buf[0].ltwo |= cpu_to_le32(BE_QUEUE_ENABLE); /* BE */
-+ if (vdebug&2) printk(KERN_NOTICE "velocity_xmit: (%s) len=%d idx=%d tdesc0=0x%x tdesc1=0x%x ltwo=0x%x\n",
-+ (pktlen<ETH_ZLEN) ? "short" : "normal", pktlen, index,
-+ td_ptr->tdesc0, td_ptr->tdesc1, td_ptr->td_buf[0].ltwo);
- mac_tx_queue_wake(vptr->mac_regs, qnum);
- }
- dev->trans_start = jiffies;
-@@ -2053,7 +2197,7 @@ static int velocity_intr(int irq, void *
- u32 isr_status;
- int max_count = 0;
-
--
-+ HAIL("velocity_intr");
- spin_lock(&vptr->lock);
- isr_status = mac_read_isr(vptr->mac_regs);
-
-@@ -2072,7 +2216,10 @@ static int velocity_intr(int irq, void *
-
- while (isr_status != 0) {
- mac_write_isr(vptr->mac_regs, isr_status);
-- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
-+ HAILS("velocity_intr",isr_status);
-+ /* MJW - velocity_error is ALWAYS called; need to mask off some other flags */
-+ /* if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) */
-+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI | ISR_PTX0I | ISR_ISR0)))
- velocity_error(vptr, isr_status);
- if (isr_status & (ISR_PRXI | ISR_PPRXI))
- max_count += velocity_rx_srv(vptr, isr_status);
-@@ -2110,6 +2257,7 @@ static void velocity_set_multi(struct ne
- int i;
- struct dev_mc_list *mclist;
-
-+ HAIL("velocity_set_multi");
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- writel(0xffffffff, &regs->MARCAM[0]);
- writel(0xffffffff, &regs->MARCAM[4]);
-@@ -2153,6 +2301,7 @@ static struct net_device_stats *velocity
- {
- struct velocity_info *vptr = netdev_priv(dev);
-
-+ HAIL("net_device_stats");
- /* If the hardware is down, don't touch MII */
- if(!netif_running(dev))
- return &vptr->stats;
-@@ -2197,6 +2346,7 @@ static int velocity_ioctl(struct net_dev
- struct velocity_info *vptr = netdev_priv(dev);
- int ret;
-
-+ HAIL("velocity_ioctl");
- /* If we are asked for information and the device is power
- saving then we need to bring the device back up to talk to it */
-
-@@ -2415,6 +2565,7 @@ static int velocity_mii_read(struct mac_
- {
- u16 ww;
-
-+ HAIL("velocity_mii_read");
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
-@@ -2451,6 +2602,7 @@ static int velocity_mii_write(struct mac
- {
- u16 ww;
-
-+ HAIL("velocity_mii_write");
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
-Index: linux-2.6.23.17/drivers/net/via-velocity.h
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/via-velocity.h
-+++ linux-2.6.23.17/drivers/net/via-velocity.h
-@@ -196,64 +196,70 @@
- * Receive descriptor
- */
-
--struct rdesc0 {
-- u16 RSR; /* Receive status */
-- u16 len:14; /* Received packet length */
-- u16 reserved:1;
-- u16 owner:1; /* Who owns this buffer ? */
--};
--
--struct rdesc1 {
-- u16 PQTAG;
-- u8 CSM;
-- u8 IPKT;
--};
-+//struct rdesc0 {
-+// u16 RSR; /* Receive status */
-+// u16 len:14; /* Received packet length */
-+// u16 reserved:1;
-+// u16 owner:1; /* Who owns this buffer ? */
-+//};
-+
-+//struct rdesc1 {
-+// u16 PQTAG;
-+// u8 CSM;
-+// u8 IPKT;
-+//};
-
- struct rx_desc {
-- struct rdesc0 rdesc0;
-- struct rdesc1 rdesc1;
-+// struct rdesc0 rdesc0;
-+// struct rdesc1 rdesc1;
-+ u32 rdesc0;
-+ u32 rdesc1;
- u32 pa_low; /* Low 32 bit PCI address */
-- u16 pa_high; /* Next 16 bit PCI address (48 total) */
-- u16 len:15; /* Frame size */
-- u16 inten:1; /* Enable interrupt */
-+// u16 pa_high; /* Next 16 bit PCI address (48 total) */
-+// u16 len:15; /* Frame size */
-+// u16 inten:1; /* Enable interrupt */
-+ u32 ltwo;
- } __attribute__ ((__packed__));
-
- /*
- * Transmit descriptor
- */
-
--struct tdesc0 {
-- u16 TSR; /* Transmit status register */
-- u16 pktsize:14; /* Size of frame */
-- u16 reserved:1;
-- u16 owner:1; /* Who owns the buffer */
--};
--
--struct pqinf { /* Priority queue info */
-- u16 VID:12;
-- u16 CFI:1;
-- u16 priority:3;
--} __attribute__ ((__packed__));
--
--struct tdesc1 {
-- struct pqinf pqinf;
-- u8 TCR;
-- u8 TCPLS:2;
-- u8 reserved:2;
-- u8 CMDZ:4;
--} __attribute__ ((__packed__));
-+//struct tdesc0 {
-+// u16 TSR; /* Transmit status register */
-+// u16 pktsize:14; /* Size of frame */
-+// u16 reserved:1;
-+// u16 owner:1; /* Who owns the buffer */
-+//};
-+
-+//struct pqinf { /* Priority queue info */
-+// u16 VID:12;
-+// u16 CFI:1;
-+// u16 priority:3;
-+//} __attribute__ ((__packed__));
-+
-+//struct tdesc1 {
-+// struct pqinf pqinf;
-+// u8 TCR;
-+// u8 TCPLS:2;
-+// u8 reserved:2;
-+// u8 CMDZ:4;
-+//} __attribute__ ((__packed__));
-
- struct td_buf {
- u32 pa_low;
-- u16 pa_high;
-- u16 bufsize:14;
-- u16 reserved:1;
-- u16 queue:1;
-+// u16 pa_high;
-+// u16 bufsize:14;
-+// u16 reserved:1;
-+// u16 queue:1;
-+ u32 ltwo;
- } __attribute__ ((__packed__));
-
- struct tx_desc {
-- struct tdesc0 tdesc0;
-- struct tdesc1 tdesc1;
-+// struct tdesc0 tdesc0;
-+// struct tdesc1 tdesc1;
-+ u32 tdesc0;
-+ u32 tdesc1;
- struct td_buf td_buf[7];
- };
-
-@@ -279,6 +285,16 @@ enum velocity_owner {
- OWNED_BY_NIC = 1
- };
-
-+/* Constants added for the BE fixes */
-+#define BE_OWNED_BY_NIC 0x80000000UL
-+#define BE_INT_ENABLE 0x80000000UL
-+#define BE_QUEUE_ENABLE 0x80000000UL
-+#define BE_TCR_TIC 0x00800000UL
-+#define BE_TCR_VETAG 0x00200000UL
-+#define BE_TCR_TCPCK 0x00040000UL
-+#define BE_TCR_UDPCK 0x00080000UL
-+#define BE_TCR_IPCK 0x00100000UL
-+
-
- /*
- * MAC registers and macros.
-@@ -1698,6 +1714,7 @@ enum velocity_flow_cntl_type {
- };
-
- struct velocity_opt {
-+ int velo_debug; /* debug flag */
- int numrx; /* Number of RX descriptors */
- int numtx; /* Number of TX descriptors */
- enum speed_opt spd_dpx; /* Media link mode */
diff --git a/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
deleted file mode 100644
index b0aee75dd4..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-Upgrade the power and reset button handling for the DSMG600:
- * Remove the superfluous declaration of ctrl_alt_del().
- * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
- * Perform the reset on the release of the power button, so that
- NAS devices which have been set to auto-power-on (by bridging
- the power button) do not continuously power cycle.
- * Remove all superflous constants from dsmg600.h
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-
----
- arch/arm/mach-ixp4xx/dsmg600-power.c | 24 ++++++++++++++----------
- include/asm-arm/arch-ixp4xx/dsmg600.h | 7 +------
- 2 files changed, 15 insertions(+), 16 deletions(-)
-
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/dsmg600-power.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/dsmg600-power.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/dsmg600-power.c
-@@ -26,10 +26,9 @@
- #include <linux/jiffies.h>
- #include <linux/timer.h>
-
-+#include <asm/gpio.h>
- #include <asm/mach-types.h>
-
--extern void ctrl_alt_del(void);
--
- /* This is used to make sure the power-button pusher is serious. The button
- * must be held until the value of this counter reaches zero.
- */
-@@ -47,9 +46,16 @@ static void dsmg600_power_handler(unsign
- * state of the power button.
- */
-
-- if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
-+ if (gpio_get_value(DSMG600_PB_GPIO)) {
-
- /* IO Pin is 1 (button pushed) */
-+ if (power_button_countdown > 0) {
-+ power_button_countdown--;
-+ }
-+
-+ } else {
-+
-+ /* Done on button release, to allow for auto-power-on mods. */
- if (power_button_countdown == 0) {
- /* Signal init to do the ctrlaltdel action, this will bypass
- * init if it hasn't started and do a kernel_restart.
-@@ -58,11 +64,9 @@ static void dsmg600_power_handler(unsign
-
- /* Change the state of the power LED to "blink" */
- gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-+ } else {
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
- }
-- power_button_countdown--;
--
-- } else {
-- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
- }
-
- mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-@@ -81,12 +85,12 @@ static int __init dsmg600_power_init(voi
- if (!(machine_is_dsmg600()))
- return 0;
-
-- if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
-+ if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
- NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-- DSMG600_RB_IRQ);
-+ gpio_to_irq(DSMG600_RB_GPIO));
-
- return -EIO;
- }
-@@ -114,7 +118,7 @@ static void __exit dsmg600_power_exit(vo
-
- del_timer_sync(&dsmg600_power_timer);
-
-- free_irq(DSMG600_RB_IRQ, NULL);
-+ free_irq(gpio_to_irq(DSMG600_RB_GPIO), NULL);
- }
-
- module_init(dsmg600_power_init);
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/dsmg600.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/dsmg600.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/dsmg600.h
-@@ -40,18 +40,13 @@
- /* Buttons */
-
- #define DSMG600_PB_GPIO 15 /* power button */
--#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO)
--
- #define DSMG600_RB_GPIO 3 /* reset button */
-
--#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3
-+/* Power control */
-
- #define DSMG600_PO_GPIO 2 /* power off */
-
- /* LEDs */
-
- #define DSMG600_LED_PWR_GPIO 0
--#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO)
--
- #define DSMG600_LED_WLAN_GPIO 14
--#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO)
diff --git a/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
deleted file mode 100644
index bf6bc078ae..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
+++ /dev/null
@@ -1,188 +0,0 @@
-Upgrade the power and reset button handling for the NAS100D:
- * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
- * Perform the reset only after the power button has been held down
- for at least two seconds. Do the reset on the release of the power
- button, so that NAS devices which have been set to auto-power-on (by
- bridging the power button) do not continuously power cycle.
- * Remove all superflous constants from nas100d.h
- * Add LED constants to nas100d.h while we're there.
-Also, update the board LED setup code to use constants.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-power.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nas100d-power.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-power.c
-@@ -21,15 +21,61 @@
- #include <linux/irq.h>
- #include <linux/module.h>
- #include <linux/reboot.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
-
-+#include <asm/gpio.h>
- #include <asm/mach-types.h>
-
--static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-+extern void ctrl_alt_del(void);
-+
-+/* This is used to make sure the power-button pusher is serious. The button
-+ * must be held until the value of this counter reaches zero.
-+ */
-+static volatile int power_button_countdown;
-+
-+/* Must hold the button down for at least this many counts to be processed */
-+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-+
-+static void nas100d_power_handler(unsigned long data);
-+static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
-+
-+static void nas100d_power_handler(unsigned long data)
- {
-- /* Signal init to do the ctrlaltdel action, this will bypass init if
-- * it hasn't started and do a kernel_restart.
-+ /* This routine is called twice per second to check the
-+ * state of the power button.
- */
-- ctrl_alt_del();
-+
-+ if (gpio_get_value(NAS100D_PB_GPIO)) {
-+
-+ /* IO Pin is 1 (button pushed) */
-+ if (power_button_countdown > 0) {
-+ power_button_countdown--;
-+ }
-+
-+ } else {
-+
-+ /* Done on button release, to allow for auto-power-on mods. */
-+ if (power_button_countdown == 0) {
-+ /* Signal init to do the ctrlaltdel action, this will bypass
-+ * init if it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ /* Change the state of the power LED to "blink" */
-+ gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-+ } else {
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+ }
-+ }
-+
-+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-+}
-+
-+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly. */
-+ machine_power_off();
-
- return IRQ_HANDLED;
- }
-@@ -39,17 +85,30 @@ static int __init nas100d_power_init(voi
- if (!(machine_is_nas100d()))
- return 0;
-
-- set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
-+ set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
-
-- if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
-+ if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
- IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-- NAS100D_RB_IRQ);
-+ gpio_to_irq(NAS100D_RB_GPIO));
-
- return -EIO;
- }
-
-+ /* The power button on the Iomega NAS100d is on GPIO 14, but
-+ * it cannot handle interrupts on that GPIO line. So we'll
-+ * have to poll it with a kernel timer.
-+ */
-+
-+ /* Make sure that the power button GPIO is set up as an input */
-+ gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Set the initial value for the power button IRQ handler */
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+
-+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-+
- return 0;
- }
-
-@@ -58,7 +117,9 @@ static void __exit nas100d_power_exit(vo
- if (!(machine_is_nas100d()))
- return;
-
-- free_irq(NAS100D_RB_IRQ, NULL);
-+ del_timer_sync(&nas100d_power_timer);
-+
-+ free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
- }
-
- module_init(nas100d_power_init);
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/nas100d.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/nas100d.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/nas100d.h
-@@ -38,15 +38,15 @@
-
- /* Buttons */
-
--#define NAS100D_PB_GPIO 14
--#define NAS100D_RB_GPIO 4
-+#define NAS100D_PB_GPIO 14 /* power button */
-+#define NAS100D_RB_GPIO 4 /* reset button */
-+
-+/* Power control */
-+
- #define NAS100D_PO_GPIO 12 /* power off */
-
--#define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14
--#define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4
-+/* LEDs */
-
--/*
--#define NAS100D_PB_BM (1L << NAS100D_PB_GPIO)
--#define NAS100D_PO_BM (1L << NAS100D_PO_GPIO)
--#define NAS100D_RB_BM (1L << NAS100D_RB_GPIO)
--*/
-+#define NAS100D_LED_WLAN_GPIO 0
-+#define NAS100D_LED_DISK_GPIO 3
-+#define NAS100D_LED_PWR_GPIO 15
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -42,20 +42,20 @@ static struct platform_device nas100d_fl
- static struct resource nas100d_led_resources[] = {
- {
- .name = "wlan", /* green led */
-- .start = 0,
-- .end = 0,
-+ .start = NAS100D_LED_WLAN_GPIO,
-+ .end = NAS100D_LED_WLAN_GPIO,
- .flags = IXP4XX_GPIO_LOW,
- },
- {
-- .name = "ready", /* blue power led (off is flashing!) */
-- .start = 15,
-- .end = 15,
-+ .name = "power", /* blue power led (off is flashing!) */
-+ .start = NAS100D_LED_PWR_GPIO,
-+ .end = NAS100D_LED_PWR_GPIO,
- .flags = IXP4XX_GPIO_LOW,
- },
- {
- .name = "disk", /* yellow led */
-- .start = 3,
-- .end = 3,
-+ .start = NAS100D_LED_DISK_GPIO,
-+ .end = NAS100D_LED_DISK_GPIO,
- .flags = IXP4XX_GPIO_LOW,
- },
- };
diff --git a/target/linux/ixp4xx/patches-2.6.23/020-ixp4xx_i2c_gpio.patch b/target/linux/ixp4xx/patches-2.6.23/020-ixp4xx_i2c_gpio.patch
deleted file mode 100644
index 89d39903c5..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/020-ixp4xx_i2c_gpio.patch
+++ /dev/null
@@ -1,232 +0,0 @@
-Migrate all ixp4xx devices to the bitbanging I2C bus driver utilizing
-the arch-neutral GPIO API (linux/i2c-gpio.h).
-
-Tested by the nslu2-linux and openwrt projects in public firmware releases.
-
-Acked-by: Rod Whitby <rod@whitby.id.au>
-Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
-
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -41,7 +42,7 @@ static struct platform_device nslu2_flas
- .resource = &nslu2_flash_resource,
- };
-
--static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
- .sda_pin = NSLU2_SDA_PIN,
- .scl_pin = NSLU2_SCL_PIN,
- };
-@@ -82,11 +83,12 @@ static struct platform_device nslu2_leds
- };
- #endif
-
--static struct platform_device nslu2_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device nslu2_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev.platform_data = &nslu2_i2c_gpio_pins,
-- .num_resources = 0,
-+ .dev = {
-+ .platform_data = &nslu2_i2c_gpio_data,
-+ },
- };
-
- static struct platform_device nslu2_beeper = {
-@@ -139,7 +141,7 @@ static struct platform_device nslu2_uart
- };
-
- static struct platform_device *nslu2_devices[] __initdata = {
-- &nslu2_i2c_controller,
-+ &nslu2_i2c_gpio,
- &nslu2_flash,
- &nslu2_beeper,
- #ifdef CONFIG_LEDS_IXP4XX
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -16,6 +16,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -68,16 +69,17 @@ static struct platform_device nas100d_le
- };
- #endif
-
--static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
- .sda_pin = NAS100D_SDA_PIN,
- .scl_pin = NAS100D_SCL_PIN,
- };
-
--static struct platform_device nas100d_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device nas100d_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev.platform_data = &nas100d_i2c_gpio_pins,
-- .num_resources = 0,
-+ .dev = {
-+ .platform_data = &nas100d_i2c_gpio_data,
-+ },
- };
-
- static struct resource nas100d_uart_resources[] = {
-@@ -124,7 +126,7 @@ static struct platform_device nas100d_ua
- };
-
- static struct platform_device *nas100d_devices[] __initdata = {
-- &nas100d_i2c_controller,
-+ &nas100d_i2c_gpio,
- &nas100d_flash,
- #ifdef CONFIG_LEDS_IXP4XX
- &nas100d_leds,
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/i2c-gpio.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -47,18 +48,17 @@ static struct platform_device avila_flas
- .resource = &avila_flash_resource,
- };
-
--static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data avila_i2c_gpio_data = {
- .sda_pin = AVILA_SDA_PIN,
- .scl_pin = AVILA_SCL_PIN,
- };
-
--static struct platform_device avila_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device avila_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev = {
-- .platform_data = &avila_i2c_gpio_pins,
-+ .dev = {
-+ .platform_data = &avila_i2c_gpio_data,
- },
-- .num_resources = 0
- };
-
- static struct resource avila_uart_resources[] = {
-@@ -133,7 +133,7 @@ static struct platform_device avila_pata
- };
-
- static struct platform_device *avila_devices[] __initdata = {
-- &avila_i2c_controller,
-+ &avila_i2c_gpio,
- &avila_flash,
- &avila_uart
- };
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -14,6 +14,7 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -37,15 +38,17 @@ static struct platform_device dsmg600_fl
- .resource = &dsmg600_flash_resource,
- };
-
--static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
- .sda_pin = DSMG600_SDA_PIN,
- .scl_pin = DSMG600_SCL_PIN,
- };
-
--static struct platform_device dsmg600_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device dsmg600_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev.platform_data = &dsmg600_i2c_gpio_pins,
-+ .dev = {
-+ .platform_data = &dsmg600_i2c_gpio_data,
-+ },
- };
-
- #ifdef CONFIG_LEDS_CLASS
-@@ -116,7 +119,7 @@ static struct platform_device dsmg600_ua
- };
-
- static struct platform_device *dsmg600_devices[] __initdata = {
-- &dsmg600_i2c_controller,
-+ &dsmg600_i2c_gpio,
- &dsmg600_flash,
- };
-
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -15,6 +15,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/i2c-gpio.h>
- #include <linux/io.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/nand.h>
-@@ -120,18 +121,17 @@ static struct platform_device ixdp425_fl
- };
- #endif /* CONFIG_MTD_NAND_PLATFORM */
-
--static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
- .sda_pin = IXDP425_SDA_PIN,
- .scl_pin = IXDP425_SCL_PIN,
- };
-
--static struct platform_device ixdp425_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device ixdp425_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev = {
-- .platform_data = &ixdp425_i2c_gpio_pins,
-+ .dev = {
-+ .platform_data = &ixdp425_i2c_gpio_data,
- },
-- .num_resources = 0
- };
-
- static struct resource ixdp425_uart_resources[] = {
-@@ -178,7 +178,7 @@ static struct platform_device ixdp425_ua
- };
-
- static struct platform_device *ixdp425_devices[] __initdata = {
-- &ixdp425_i2c_controller,
-+ &ixdp425_i2c_gpio,
- &ixdp425_flash,
- #if defined(CONFIG_MTD_NAND_PLATFORM) || \
- defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
diff --git a/target/linux/ixp4xx/patches-2.6.23/030-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.23/030-ixp4xx_fsg_board_support.patch
deleted file mode 100644
index d3f2f94a29..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/030-ixp4xx_fsg_board_support.patch
+++ /dev/null
@@ -1,793 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/fsg-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/fsg-pci.c
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/arch/mach-ixp4xx/fsg-pci.c
-+ *
-+ * FSG board-level PCI initialization
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init fsg_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
-+ IRQ_FSG_PCI_INTC,
-+ IRQ_FSG_PCI_INTB,
-+ IRQ_FSG_PCI_INTA,
-+ };
-+
-+ int irq = -1;
-+ slot = slot - 11;
-+
-+ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) {
-+ irq = pci_irq_table[(slot - 1)];
-+ }
-+ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq);
-+
-+ return irq;
-+}
-+
-+struct hw_pci fsg_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = fsg_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = fsg_map_irq,
-+};
-+
-+int __init fsg_pci_init(void)
-+{
-+ if (machine_is_fsg())
-+ pci_common_init(&fsg_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(fsg_pci_init);
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/fsg-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/fsg-setup.c
-@@ -0,0 +1,220 @@
-+/*
-+ * arch/arm/mach-ixp4xx/fsg-setup.c
-+ *
-+ * FSG board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/leds.h>
-+#include <linux/reboot.h>
-+#include <linux/i2c-gpio.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/io.h>
-+
-+static struct flash_platform_data fsg_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource fsg_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device fsg_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &fsg_flash_data,
-+ .num_resources = 1,
-+ .resource = &fsg_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
-+ .sda_pin = FSG_SDA_PIN,
-+ .scl_pin = FSG_SCL_PIN,
-+};
-+
-+static struct platform_device fsg_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &fsg_i2c_gpio_data,
-+ },
-+};
-+
-+static struct resource fsg_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port fsg_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device fsg_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = fsg_uart_data,
-+ .num_resources = ARRAY_SIZE(fsg_uart_resources),
-+ .resource = fsg_uart_resources,
-+};
-+
-+static struct platform_device fsg_leds = {
-+ .name = "fsg-led",
-+ .id = -1,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info fsg_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 4,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device fsg_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = fsg_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = fsg_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *fsg_devices[] __initdata = {
-+ &fsg_i2c_gpio,
-+ &fsg_flash,
-+ &fsg_leds,
-+ &fsg_eth[0],
-+ &fsg_eth[1],
-+};
-+
-+static void fsg_power_off(void)
-+{
-+ printk("Restarting system.\n");
-+ machine_restart(NULL);
-+}
-+
-+static void __init fsg_init(void)
-+{
-+ uint8_t __iomem *f;
-+ int i;
-+
-+ ixp4xx_sys_init();
-+
-+ pm_power_off = fsg_power_off;
-+
-+ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ fsg_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ /* Configure CS2 for operation, 8bit and writable */
-+ *IXP4XX_EXP_CS2 = 0xbfff0002;
-+
-+ /* This is only useful on a modified machine, but it is valuable
-+ * to have it first in order to see debug messages, and so that
-+ * it does *not* get removed if platform_add_devices fails!
-+ */
-+ (void)platform_device_register(&fsg_uart);
-+
-+ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
-+
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC addresses.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000))) {
-+#ifdef __ARMEB__
-+ for (i = 0; i < 6; i++) {
-+ fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
-+ fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
-+ }
-+#else
-+ fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0422 + 3);
-+ fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0422 + 2);
-+ fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0422 + 1);
-+ fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0422 + 0);
-+ fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0422 + 7);
-+ fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0422 + 6);
-+
-+ fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0422 + 3);
-+ fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C0422 + 2);
-+ fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C0422 + 1);
-+ fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C0422 + 0);
-+ fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C0422 + 7);
-+ fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0422 + 6);
-+#endif
-+ iounmap(f);
-+ }
-+ printk(KERN_INFO "FSG: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
-+ fsg_plat_eth[0].hwaddr[0], fsg_plat_eth[0].hwaddr[1],
-+ fsg_plat_eth[0].hwaddr[2], fsg_plat_eth[0].hwaddr[3],
-+ fsg_plat_eth[0].hwaddr[4], fsg_plat_eth[0].hwaddr[5]);
-+ printk(KERN_INFO "FSG: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 1\n",
-+ fsg_plat_eth[1].hwaddr[0], fsg_plat_eth[1].hwaddr[1],
-+ fsg_plat_eth[1].hwaddr[2], fsg_plat_eth[1].hwaddr[3],
-+ fsg_plat_eth[1].hwaddr[4], fsg_plat_eth[1].hwaddr[5]);
-+
-+}
-+
-+MACHINE_START(FSG, "Freecom FSG-3")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = fsg_init,
-+MACHINE_END
-+
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -125,6 +125,15 @@ config ARCH_IXDP4XX
- depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
- default y
-
-+config MACH_FSG
-+ bool
-+ prompt "Freecom FSG-3"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Freecom's
-+ FSG-3 device. For more information on this platform,
-+ see http://www.nslu2-linux.org/wiki/FSG3/HomePage
-+
- #
- # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
- #
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
-+obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-
- obj-y += common.o
-
-@@ -28,5 +29,6 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-se
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
-+obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/fsg.h
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/fsg.h
-@@ -0,0 +1,50 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/fsg.h
-+ *
-+ * Freecom FSG-3 platform specific definitions
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * Based on coyote.h by
-+ * Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define FSG_SDA_PIN 12
-+#define FSG_SCL_PIN 13
-+
-+/*
-+ * FSG PCI IRQs
-+ */
-+#define FSG_PCI_MAX_DEV 3
-+#define FSG_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define FSG_PCI_INTA_PIN 6
-+#define FSG_PCI_INTB_PIN 7
-+#define FSG_PCI_INTC_PIN 5
-+
-+/* Buttons */
-+
-+#define FSG_SB_GPIO 4 /* sync button */
-+#define FSG_RB_GPIO 9 /* reset button */
-+#define FSG_UB_GPIO 10 /* usb button */
-+
-+/* LEDs */
-+
-+#define FSG_LED_WLAN_BIT 0
-+#define FSG_LED_WAN_BIT 1
-+#define FSG_LED_SATA_BIT 2
-+#define FSG_LED_USB_BIT 4
-+#define FSG_LED_RING_BIT 5
-+#define FSG_LED_SYNC_BIT 7
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -45,5 +45,6 @@
- #include "nslu2.h"
- #include "nas100d.h"
- #include "dsmg600.h"
-+#include "fsg.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/irqs.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/irqs.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/irqs.h
-@@ -128,4 +128,11 @@
- #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
- #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
-
-+/*
-+ * Freecom FSG-3 Board IRQs
-+ */
-+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
-+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
-+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
-+
- #endif
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/fsg-power.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/fsg-power.c
-@@ -0,0 +1,89 @@
-+/*
-+ * arch/arm/mach-ixp4xx/fsg-power.c
-+ *
-+ * FSG Power/Reset driver
-+ *
-+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
-+ *
-+ * based on nslu2-power.c
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
-+
-+#include <asm/gpio.h>
-+#include <asm/mach-types.h>
-+
-+static irqreturn_t fsg_power_handler(int irq, void *dev_id)
-+{
-+ /* Signal init to do the ctrlaltdel action, this will bypass init if
-+ * it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly.
-+ */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init fsg_power_init(void)
-+{
-+ if (!(machine_is_fsg()))
-+ return 0;
-+
-+ set_irq_type(gpio_to_irq(FSG_RB_GPIO), IRQT_LOW);
-+ set_irq_type(gpio_to_irq(FSG_SB_GPIO), IRQT_LOW);
-+
-+ if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
-+ IRQF_DISABLED, "FSG reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ gpio_to_irq(FSG_RB_GPIO));
-+
-+ return -EIO;
-+ }
-+
-+ if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
-+ IRQF_DISABLED, "FSG power button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+ gpio_to_irq(FSG_SB_GPIO));
-+
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit fsg_power_exit(void)
-+{
-+ if (!(machine_is_fsg()))
-+ return;
-+
-+ free_irq(gpio_to_irq(FSG_SB_GPIO), NULL);
-+ free_irq(gpio_to_irq(FSG_RB_GPIO), NULL);
-+}
-+
-+module_init(fsg_power_init);
-+module_exit(fsg_power_exit);
-+
-+MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
-+MODULE_DESCRIPTION("FSG Power/Reset driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.23.17/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/leds/Kconfig
-+++ linux-2.6.23.17/drivers/leds/Kconfig
-@@ -48,6 +48,12 @@ config LEDS_IXP4XX
- particular board must have LEDs and they must be connected
- to the GPIO lines. If unsure, say Y.
-
-+config LEDS_FSG
-+ tristate "LED Support for the Freecom FSG-3"
-+ depends on LEDS_CLASS && MACH_FSG
-+ help
-+ This option enables support for the LEDs on the Freecom FSG-3.
-+
- config LEDS_TOSA
- tristate "LED Support for the Sharp SL-6000 series"
- depends on LEDS_CLASS && PXA_SHARPSL
-Index: linux-2.6.23.17/drivers/leds/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/leds/Makefile
-+++ linux-2.6.23.17/drivers/leds/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_LEDS_CORGI) += leds-corgi.
- obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
- obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
- obj-$(CONFIG_LEDS_IXP4XX) += leds-ixp4xx-gpio.o
-+obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
- obj-$(CONFIG_LEDS_TOSA) += leds-tosa.o
- obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
- obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
-Index: linux-2.6.23.17/drivers/leds/leds-fsg.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/drivers/leds/leds-fsg.c
-@@ -0,0 +1,243 @@
-+/*
-+ * LED Driver for the Freecom FSG-3
-+ *
-+ * Copyright (c) 2008 Rod Whitby <rod@whitby.id.au>
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ *
-+ * Based on leds-spitz.c
-+ * Copyright 2005-2006 Openedhand Ltd.
-+ * Author: Richard Purdie <rpurdie@openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/io.h>
-+
-+static short __iomem *latch_address;
-+static unsigned short latch_value;
-+
-+
-+static void fsg_led_wlan_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_WLAN_BIT);
-+ *latch_address = latch_value;
-+ }
-+ else {
-+ latch_value |= (1 << FSG_LED_WLAN_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_wan_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_WAN_BIT);
-+ *latch_address = latch_value;
-+ }
-+ else {
-+ latch_value |= (1 << FSG_LED_WAN_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_sata_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_SATA_BIT);
-+ *latch_address = latch_value;
-+ }
-+ else {
-+ latch_value |= (1 << FSG_LED_SATA_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_usb_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_USB_BIT);
-+ *latch_address = latch_value;
-+ }
-+ else {
-+ latch_value |= (1 << FSG_LED_USB_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_sync_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_SYNC_BIT);
-+ *latch_address = latch_value;
-+ }
-+ else {
-+ latch_value |= (1 << FSG_LED_SYNC_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_ring_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_RING_BIT);
-+ *latch_address = latch_value;
-+ }
-+ else {
-+ latch_value |= (1 << FSG_LED_RING_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+
-+
-+static struct led_classdev fsg_wlan_led = {
-+ .name = "fsg:wlan",
-+ .brightness_set = fsg_led_wlan_set,
-+};
-+
-+static struct led_classdev fsg_wan_led = {
-+ .name = "fsg:wan",
-+ .brightness_set = fsg_led_wan_set,
-+};
-+
-+static struct led_classdev fsg_sata_led = {
-+ .name = "fsg:sata",
-+ .brightness_set = fsg_led_sata_set,
-+};
-+
-+static struct led_classdev fsg_usb_led = {
-+ .name = "fsg:usb",
-+ .brightness_set = fsg_led_usb_set,
-+};
-+
-+static struct led_classdev fsg_sync_led = {
-+ .name = "fsg:sync",
-+ .brightness_set = fsg_led_sync_set,
-+};
-+
-+static struct led_classdev fsg_ring_led = {
-+ .name = "fsg:ring",
-+ .brightness_set = fsg_led_ring_set,
-+};
-+
-+
-+
-+#ifdef CONFIG_PM
-+static int fsg_led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ led_classdev_suspend(&fsg_wlan_led);
-+ led_classdev_suspend(&fsg_wan_led);
-+ led_classdev_suspend(&fsg_sata_led);
-+ led_classdev_suspend(&fsg_usb_led);
-+ led_classdev_suspend(&fsg_sync_led);
-+ led_classdev_suspend(&fsg_ring_led);
-+ return 0;
-+}
-+
-+static int fsg_led_resume(struct platform_device *dev)
-+{
-+ led_classdev_resume(&fsg_wlan_led);
-+ led_classdev_resume(&fsg_wan_led);
-+ led_classdev_resume(&fsg_sata_led);
-+ led_classdev_resume(&fsg_usb_led);
-+ led_classdev_resume(&fsg_sync_led);
-+ led_classdev_resume(&fsg_ring_led);
-+ return 0;
-+}
-+#endif
-+
-+
-+static int fsg_led_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ /* FIXME: Need to work out how to handle failure below */
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
-+ if (ret < 0)
-+ return ret;
-+
-+ return ret;
-+}
-+
-+static int fsg_led_remove(struct platform_device *pdev)
-+{
-+ led_classdev_unregister(&fsg_wlan_led);
-+ led_classdev_unregister(&fsg_wan_led);
-+ led_classdev_unregister(&fsg_sata_led);
-+ led_classdev_unregister(&fsg_usb_led);
-+ led_classdev_unregister(&fsg_sync_led);
-+ led_classdev_unregister(&fsg_ring_led);
-+
-+ return 0;
-+}
-+
-+
-+static struct platform_driver fsg_led_driver = {
-+ .probe = fsg_led_probe,
-+ .remove = fsg_led_remove,
-+#ifdef CONFIG_PM
-+ .suspend = fsg_led_suspend,
-+ .resume = fsg_led_resume,
-+#endif
-+ .driver = {
-+ .name = "fsg-led",
-+ },
-+};
-+
-+
-+static int __init fsg_led_init(void)
-+{
-+ /* Map the LED chip select address space */
-+ latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
-+ if (!latch_address)
-+ return -ENOMEM;
-+ latch_value = 0xffff;
-+ *latch_address = latch_value;
-+ /* FIXME: We leak memory if the next line fails */
-+ return platform_driver_register(&fsg_led_driver);
-+}
-+
-+static void __exit fsg_led_exit(void)
-+{
-+ platform_driver_unregister(&fsg_led_driver);
-+ iounmap(latch_address);
-+}
-+
-+
-+module_init(fsg_led_init);
-+module_exit(fsg_led_exit);
-+
-+MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
-+MODULE_DESCRIPTION("Freecom FSG-3 LED driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch b/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch
deleted file mode 100644
index cd500a5cb2..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -24,6 +24,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/mach/time.h>
-+#include <asm/io.h>
-
- static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
-@@ -140,6 +141,23 @@ static struct platform_device nslu2_uart
- .resource = nslu2_uart_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info nslu2_plat_eth[] = {
-+ {
-+ .phy = 1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device nslu2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = nslu2_plat_eth,
-+ }
-+};
-+
- static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_gpio,
- &nslu2_flash,
-@@ -147,6 +165,7 @@ static struct platform_device *nslu2_dev
- #ifdef CONFIG_LEDS_IXP4XX
- &nslu2_leds,
- #endif
-+ &nslu2_eth[0],
- };
-
- static void nslu2_power_off(void)
-@@ -175,6 +194,9 @@ static struct sys_timer nslu2_timer = {
-
- static void __init nslu2_init(void)
- {
-+ uint8_t __iomem *f;
-+ int i;
-+
- ixp4xx_sys_init();
-
- nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -191,6 +213,33 @@ static void __init nslu2_init(void)
- (void)platform_device_register(&nslu2_uart);
-
- platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC address.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000))) {
-+#ifdef __ARMEB__
-+ for (i = 0; i < 6; i++) {
-+ nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
-+ }
-+#else
-+ nslu2_plat_eth[0].hwaddr[0] = readb(f + 0x3FFB0 + 3);
-+ nslu2_plat_eth[0].hwaddr[1] = readb(f + 0x3FFB0 + 2);
-+ nslu2_plat_eth[0].hwaddr[2] = readb(f + 0x3FFB0 + 1);
-+ nslu2_plat_eth[0].hwaddr[3] = readb(f + 0x3FFB0 + 0);
-+ nslu2_plat_eth[0].hwaddr[4] = readb(f + 0x3FFB0 + 7);
-+ nslu2_plat_eth[0].hwaddr[5] = readb(f + 0x3FFB0 + 6);
-+#endif
-+ iounmap(f);
-+ }
-+ printk(KERN_INFO "NSLU2: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
-+ nslu2_plat_eth[0].hwaddr[0], nslu2_plat_eth[0].hwaddr[1],
-+ nslu2_plat_eth[0].hwaddr[2], nslu2_plat_eth[0].hwaddr[3],
-+ nslu2_plat_eth[0].hwaddr[4], nslu2_plat_eth[0].hwaddr[5]);
-+
- }
-
- MACHINE_START(NSLU2, "Linksys NSLU2")
diff --git a/target/linux/ixp4xx/patches-2.6.23/032-ixp4xx-net-drivers-nas100d.patch b/target/linux/ixp4xx/patches-2.6.23/032-ixp4xx-net-drivers-nas100d.patch
deleted file mode 100644
index 656c83ebe3..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/032-ixp4xx-net-drivers-nas100d.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -21,6 +21,7 @@
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-+#include <asm/io.h>
-
- static struct flash_platform_data nas100d_flash_data = {
- .map_name = "cfi_probe",
-@@ -125,12 +126,30 @@ static struct platform_device nas100d_ua
- .resource = nas100d_uart_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info nas100d_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device nas100d_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = nas100d_plat_eth,
-+ }
-+};
-+
- static struct platform_device *nas100d_devices[] __initdata = {
- &nas100d_i2c_gpio,
- &nas100d_flash,
- #ifdef CONFIG_LEDS_IXP4XX
- &nas100d_leds,
- #endif
-+ &nas100d_eth[0],
- };
-
- static void nas100d_power_off(void)
-@@ -146,6 +165,9 @@ static void nas100d_power_off(void)
-
- static void __init nas100d_init(void)
- {
-+ uint8_t __iomem *f;
-+ int i;
-+
- ixp4xx_sys_init();
-
- /* gpio 14 and 15 are _not_ clocks */
-@@ -165,6 +187,33 @@ static void __init nas100d_init(void)
- (void)platform_device_register(&nas100d_uart);
-
- platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
-+
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC address.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000))) {
-+#ifdef __ARMEB__
-+ for (i = 0; i < 6; i++) {
-+ nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
-+ }
-+#else
-+ nas100d_plat_eth[0].hwaddr[0] = readb(f + 0xFC0FD8 + 3);
-+ nas100d_plat_eth[0].hwaddr[1] = readb(f + 0xFC0FD8 + 2);
-+ nas100d_plat_eth[0].hwaddr[2] = readb(f + 0xFC0FD8 + 1);
-+ nas100d_plat_eth[0].hwaddr[3] = readb(f + 0xFC0FD8 + 0);
-+ nas100d_plat_eth[0].hwaddr[4] = readb(f + 0xFC0FD8 + 7);
-+ nas100d_plat_eth[0].hwaddr[5] = readb(f + 0xFC0FD8 + 6);
-+#endif
-+ iounmap(f);
-+ }
-+ printk(KERN_INFO "NAS100D: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
-+ nas100d_plat_eth[0].hwaddr[0], nas100d_plat_eth[0].hwaddr[1],
-+ nas100d_plat_eth[0].hwaddr[2], nas100d_plat_eth[0].hwaddr[3],
-+ nas100d_plat_eth[0].hwaddr[4], nas100d_plat_eth[0].hwaddr[5]);
-+
- }
-
- MACHINE_START(NAS100D, "Iomega NAS 100d")
diff --git a/target/linux/ixp4xx/patches-2.6.23/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-2.6.23/090-increase_entropy_pools.patch
deleted file mode 100644
index 333f481bf2..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/090-increase_entropy_pools.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Index: linux-2.6.23.17/drivers/char/random.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/char/random.c
-+++ linux-2.6.23.17/drivers/char/random.c
-@@ -248,9 +248,9 @@
- /*
- * Configuration information
- */
--#define INPUT_POOL_WORDS 128
--#define OUTPUT_POOL_WORDS 32
--#define SEC_XFER_SIZE 512
-+#define INPUT_POOL_WORDS 256
-+#define OUTPUT_POOL_WORDS 64
-+#define SEC_XFER_SIZE 1024
-
- /*
- * The minimum number of bits of entropy before we wake up a read on
diff --git a/target/linux/ixp4xx/patches-2.6.23/091-nslu2_rtc_fixup.patch b/target/linux/ixp4xx/patches-2.6.23/091-nslu2_rtc_fixup.patch
deleted file mode 100644
index 0facc598ad..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/091-nslu2_rtc_fixup.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -20,6 +20,7 @@
- #include <linux/leds.h>
- #include <linux/i2c-gpio.h>
-
-+#include <asm/setup.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-@@ -192,6 +193,35 @@ static struct sys_timer nslu2_timer = {
- .init = nslu2_timer_init,
- };
-
-+static char nslu2_rtc_probe[] __initdata = "rtc-isl1208.ignore=0,0x6f rtc-x1205.probe=0,0x6f ";
-+
-+static void __init nslu2_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p,
-+ COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init nslu2_init(void)
- {
- uint8_t __iomem *f;
-@@ -247,6 +277,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
- .boot_params = 0x00000100,
-+ .fixup = nslu2_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &nslu2_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.23/092-nas100d_rtc_fixup.patch b/target/linux/ixp4xx/patches-2.6.23/092-nas100d_rtc_fixup.patch
deleted file mode 100644
index 00a51bc31a..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/092-nas100d_rtc_fixup.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/leds.h>
- #include <linux/i2c-gpio.h>
-
-+#include <asm/setup.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-@@ -163,6 +164,35 @@ static void nas100d_power_off(void)
- gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
-+static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
-+
-+static void __init nas100d_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p,
-+ COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init nas100d_init(void)
- {
- uint8_t __iomem *f;
-@@ -221,6 +251,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d"
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
- .boot_params = 0x00000100,
-+ .fixup = nas100d_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.23/095-dsmg600_rtc_fixup.patch b/target/linux/ixp4xx/patches-2.6.23/095-dsmg600_rtc_fixup.patch
deleted file mode 100644
index b46c2947e4..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/095-dsmg600_rtc_fixup.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -16,6 +16,7 @@
- #include <linux/serial_8250.h>
- #include <linux/i2c-gpio.h>
-
-+#include <asm/setup.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-@@ -145,6 +146,35 @@ static struct sys_timer dsmg600_timer =
- .init = dsmg600_timer_init,
- };
-
-+static char dsmg600_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
-+
-+static void __init dsmg600_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(dsmg600_rtc_probe) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, dsmg600_rtc_probe, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(dsmg600_rtc_probe), p,
-+ COMMAND_LINE_SIZE - strlen(dsmg600_rtc_probe));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init dsmg600_init(void)
- {
- ixp4xx_sys_init();
-@@ -177,6 +207,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
- .boot_params = 0x00000100,
-+ .fixup = dsmg600_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &dsmg600_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.23/096-kexec_cmdline.patch b/target/linux/ixp4xx/patches-2.6.23/096-kexec_cmdline.patch
deleted file mode 100644
index d27a785789..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/096-kexec_cmdline.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-Index: linux-2.6.23.17/kernel/ksysfs.c
-===================================================================
---- linux-2.6.23.17.orig/kernel/ksysfs.c
-+++ linux-2.6.23.17/kernel/ksysfs.c
-@@ -49,6 +49,165 @@ KERNEL_ATTR_RW(uevent_helper);
- #endif
-
- #ifdef CONFIG_KEXEC
-+
-+#include <asm/setup.h>
-+
-+extern unsigned long kexec_boot_params;
-+
-+char kexec_cmdline[COMMAND_LINE_SIZE] = "";
-+
-+static void
-+replace_cmdline_tag(void)
-+{
-+ char *t;
-+ struct tag *real;
-+ struct tag *copy;
-+ struct tag *rend;
-+ int i;
-+
-+/* TODO: check the return params */
-+ t = kmalloc(KEXEC_BOOT_PARAMS_SIZE + COMMAND_LINE_SIZE, GFP_KERNEL);
-+ memset((void *)t, 0, KEXEC_BOOT_PARAMS_SIZE + COMMAND_LINE_SIZE);
-+
-+/* TODO: validate that the boot params are ATAGS, in fact */
-+
-+ copy = (struct tag *)t;
-+ real = (struct tag *)kexec_boot_params;
-+ rend = (struct tag *)(kexec_boot_params + KEXEC_BOOT_PARAMS_SIZE);
-+ while ((real->hdr.size) && (real < rend)) {
-+ if (real->hdr.tag != ATAG_CMDLINE) {
-+ memcpy((void *)copy, (void *)real, real->hdr.size * 4);
-+ copy = tag_next(copy);
-+ }
-+ real = tag_next(real);
-+ }
-+
-+/* TODO: validate that we have enough space in the buffer */
-+
-+ i = strlen(kexec_cmdline);
-+ if (i) {
-+ copy->hdr.tag = ATAG_CMDLINE;
-+ copy->hdr.size = (sizeof(struct tag_header) + i + 1 + 4) >> 2;
-+ strcpy(copy->u.cmdline.cmdline, kexec_cmdline);
-+ copy = tag_next(copy);
-+ }
-+
-+ copy->hdr.tag = ATAG_NONE; /* Empty tag ends list */
-+ copy->hdr.size = 0; /* zero length */
-+
-+/* TODO: validate that the temporary buffer isn't too full */
-+
-+ memcpy((void *)kexec_boot_params, (void *)t, KEXEC_BOOT_PARAMS_SIZE);
-+
-+ kfree(t); /* Don't forget to free the big buffer we used */
-+}
-+
-+static ssize_t kexec_cmdline_show(struct kset *kset, char *page)
-+{
-+ return sprintf(page, "%s\n", kexec_cmdline);
-+}
-+
-+static ssize_t kexec_cmdline_store(struct kset *kset, const char *page,
-+ size_t count)
-+{
-+ if ((count + 1) > COMMAND_LINE_SIZE)
-+ count = COMMAND_LINE_SIZE;
-+ memcpy(kexec_cmdline, page, count);
-+ kexec_cmdline[count] = '\0';
-+ if (count && (kexec_cmdline[count - 1] == '\n'))
-+ kexec_cmdline[count - 1] = '\0';
-+ replace_cmdline_tag();
-+ return count;
-+}
-+KERNEL_ATTR_RW(kexec_cmdline);
-+
-+static ssize_t kexec_boot_params_show(struct kset *kset, char *page)
-+{
-+ unsigned long *p;
-+ char buf[PAGE_SIZE];
-+ int keep_doing;
-+
-+ p = (unsigned long *)kexec_boot_params;
-+
-+ /* if this doesn't look like atags, just print first few words */
-+ if (p[1] != ATAG_CORE)
-+ return sprintf(page, "0x%lx 0x%lx 0x%lx 0x%lx\n",
-+ p[0], p[1], p[2], p[3]);
-+
-+ /* carefully walk the atag list, and print out the structure */
-+ keep_doing = 1;
-+ do {
-+ switch (p[1]) {
-+ case ATAG_CORE:
-+ /* watch out, core tag is permitted to be empty */
-+ if (p[0] == 5)
-+ sprintf(buf,
-+ "CORE flg=%ld pgsz=%ld rdev=0x%lx\n",
-+ p[2], p[3], p[4]);
-+ else
-+ sprintf(buf,"CORE\n");
-+ break;
-+ case ATAG_MEM:
-+ sprintf(buf,"MEM %ldM@0x%lx\n", p[2] / (1024 * 1024),
-+ p[3]);
-+ break;
-+ case ATAG_VIDEOTEXT:
-+ sprintf(buf,"VIDEOTEXT sz=%ld\n", p[0]);
-+ break;
-+ case ATAG_RAMDISK:
-+ sprintf(buf,"RAMDISK prmpt=%ld %ldK@0x%lx\n",
-+ p[2], p[3], p[4]);
-+ break;
-+ case ATAG_INITRD2:
-+ sprintf(buf,"INITRD2 %ldK@0x%lx\n", p[3] / 1024, p[2]);
-+ break;
-+ case ATAG_SERIAL:
-+ sprintf(buf,"SERIAL high=0x%08lx low=0x%08lx\n",
-+ p[3], p[2]);
-+ break;
-+ case ATAG_REVISION:
-+ sprintf(buf,"REVISION rev=%ld\n", p[2]);
-+ break;
-+ case ATAG_VIDEOLFB:
-+ sprintf(buf,"VIDEOLFB sz=%ld\n", p[0]);
-+ break;
-+ case ATAG_CMDLINE:
-+ sprintf(buf,"CMD \"%s\"\n", (char *)&p[2]);
-+ break;
-+ case ATAG_NONE:
-+ sprintf(buf,"NONE\n");
-+ keep_doing = 0;
-+ break;
-+ default:
-+ sprintf(buf,"-unknown- sz=%ld\n", p[0]);
-+ break;
-+ }
-+
-+ /* carefully add to page */
-+ if ((strlen(buf) + strlen(page)) < PAGE_SIZE) {
-+ strcat(page, buf);
-+ } else {
-+ keep_doing = 0;
-+ }
-+
-+ /* stop when we encounter a header length of 0 */
-+ if (p[0] == 0)
-+ keep_doing = 0;
-+
-+ /* go to the next tag */
-+ p += p[0];
-+
-+ /* stop if we walked off the end of the buffer */
-+ if (p > (unsigned long *)(kexec_boot_params +
-+ KEXEC_BOOT_PARAMS_SIZE))
-+ keep_doing = 0;
-+
-+ } while (keep_doing);
-+
-+ return (strlen(page));
-+}
-+KERNEL_ATTR_RO(kexec_boot_params);
-+
- static ssize_t kexec_loaded_show(struct kset *kset, char *page)
- {
- return sprintf(page, "%d\n", !!kexec_image);
-@@ -95,6 +254,8 @@ static struct attribute * kernel_attrs[]
- #ifdef CONFIG_KEXEC
- &kexec_loaded_attr.attr,
- &kexec_crash_loaded_attr.attr,
-+ &kexec_cmdline_attr.attr,
-+ &kexec_boot_params_attr.attr,
- #endif
- NULL
- };
diff --git a/target/linux/ixp4xx/patches-2.6.23/100-gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/100-gateway7001_mac_plat_info.patch
deleted file mode 100644
index 915e501bce..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/100-gateway7001_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/gateway7001-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device gateway700
- .resource = &gateway7001_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info gateway7001_plat_eth[] = {
-+ {
-+ .phy = 1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 2,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device gateway7001_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = gateway7001_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = gateway7001_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
-- &gateway7001_uart
-+ &gateway7001_uart,
-+ &gateway7001_eth[0],
-+ &gateway7001_eth[1],
- };
-
- static void __init gateway7001_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.23/101-wg302_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/101-wg302_mac_plat_info.patch
deleted file mode 100644
index af638b0d0b..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/101-wg302_mac_plat_info.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v2-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -77,9 +77,27 @@ static struct platform_device wg302v2_ua
- .resource = &wg302v2_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wg302_plat_eth[] = {
-+ {
-+ .phy = 8,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302_plat_eth,
-+ }
-+};
-+
- static struct platform_device *wg302v2_devices[] __initdata = {
- &wg302v2_flash,
- &wg302v2_uart,
-+ &wg302_eth[0],
- };
-
- static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.23/110-pronghorn_metro_support.patch b/target/linux/ixp4xx/patches-2.6.23/110-pronghorn_metro_support.patch
deleted file mode 100644
index 1d6baae5b9..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/110-pronghorn_metro_support.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -57,6 +57,14 @@ config MACH_WG302V2
- WG302 v2 or WAG302 v2 Access Points. For more information
- on this platform, see http://openwrt.org
-
-+config MACH_PRONGHORNMETRO
-+ bool "Pronghorn Metro"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Pronghorn Metro Platform. For more
-+ information on this platform, see <file:Documentation/arm/IXP4xx>.
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-@@ -16,6 +16,7 @@ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg6
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-+obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-
- obj-y += common.o
-
-@@ -30,5 +31,6 @@ obj-$(CONFIG_MACH_DSMG600) += dsmg6
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
-+obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
-@@ -0,0 +1,74 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Pronghorn Metro
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init pronghornmetro_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO4;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 16)
-+ return IRQ_IXP4XX_GPIO1;
-+ else return -1;
-+}
-+
-+struct hw_pci pronghornmetro_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = pronghornmetro_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = pronghornmetro_map_irq,
-+};
-+
-+int __init pronghornmetro_pci_init(void)
-+{
-+ if (machine_is_pronghorn_metro())
-+ pci_common_init(&pronghornmetro_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(pronghornmetro_pci_init);
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -0,0 +1,147 @@
-+/*
-+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+ *
-+ * Board setup for the ADI Engineering Pronghorn Metro
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data pronghornmetro_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource pronghornmetro_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device pronghornmetro_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghornmetro_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghornmetro_flash_resource,
-+};
-+
-+static struct resource pronghornmetro_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port pronghornmetro_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device pronghornmetro_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = pronghornmetro_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghornmetro_uart_resource,
-+};
-+
-+static struct resource pronghornmetro_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO0,
-+ .end = IRQ_IXP4XX_GPIO0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data pronghornmetro_pata_data = {
-+ .cs0_bits = 0xbfff0043,
-+ .cs1_bits = 0xbfff0043,
-+};
-+
-+static struct platform_device pronghornmetro_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &pronghornmetro_pata_data,
-+ .num_resources = ARRAY_SIZE(pronghornmetro_pata_resources),
-+ .resource = pronghornmetro_pata_resources,
-+};
-+
-+static struct platform_device *pronghornmetro_devices[] __initdata = {
-+ &pronghornmetro_flash,
-+ &pronghornmetro_uart,
-+};
-+
-+static void __init pronghornmetro_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
-+
-+ pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&pronghornmetro_pata);
-+}
-+
-+#ifdef CONFIG_MACH_PRONGHORNMETRO
-+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = pronghornmetro_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.23.17/Documentation/arm/IXP4xx
-===================================================================
---- linux-2.6.23.17.orig/Documentation/arm/IXP4xx
-+++ linux-2.6.23.17/Documentation/arm/IXP4xx
-@@ -111,6 +111,9 @@ http://www.adiengineering.com/productsCo
- the platform has two mini-PCI slots used for 802.11[bga] cards.
- Finally, there is an IDE port hanging off the expansion bus.
-
-+ADI Engineering Pronghorn Metro Platform
-+http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
-+
- Gateworks Avila Network Platform
- http://www.gateworks.com/avila_sbc.htm
-
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_set
- * Some boards are using UART2 as console
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-- machine_is_gateway7001() || machine_is_wg302v2())
-+ machine_is_gateway7001() || machine_is_wg302v2() ||
-+ machine_is_pronghorn_metro())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.23/111-pronghorn_metro_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/111-pronghorn_metro_mac_plat_info.patch
deleted file mode 100644
index 50e93da854..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/111-pronghorn_metro_mac_plat_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -104,9 +104,36 @@ static struct platform_device pronghornm
- .resource = pronghornmetro_pata_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info pronghornmetro_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device pronghornmetro_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = pronghornmetro_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = pronghornmetro_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *pronghornmetro_devices[] __initdata = {
- &pronghornmetro_flash,
- &pronghornmetro_uart,
-+ &pronghornmetro_eth[0],
-+ &pronghornmetro_eth[1],
- };
-
- static void __init pronghornmetro_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.23/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.23/120-compex_support.patch
deleted file mode 100644
index a51225bdd0..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/120-compex_support.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
- Engineering Pronghorn Metro Platform. For more
- information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_COMPEX
-+ bool "Compex WP18 / NP18A"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Compex'
-+ WP18 or NP18A boards. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-@@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-+obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -32,5 +33,6 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gatewa
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -0,0 +1,120 @@
-+/*
-+ * arch/arm/mach-ixp4xx/compex-setup.c
-+ *
-+ * Ccompex WP18 / NP18A board-setup
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data compex_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource compex_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device compex_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &compex_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &compex_flash_resource,
-+};
-+
-+static struct resource compex_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port compex_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device compex_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = compex_uart_data,
-+ .num_resources = 2,
-+ .resource = compex_uart_resources,
-+};
-+
-+static struct platform_device *compex_devices[] __initdata = {
-+ &compex_flash,
-+ &compex_uart
-+};
-+
-+static void __init compex_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ compex_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
-+}
-+
-+#ifdef CONFIG_MACH_COMPEX
-+MACHINE_START(COMPEX, "Compex WP18 / NP18A")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = compex_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465() || machine_is_kixrp435())
-+ machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
-Index: linux-2.6.23.17/arch/arm/tools/mach-types
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/tools/mach-types
-+++ linux-2.6.23.17/arch/arm/tools/mach-types
-@@ -1278,7 +1278,7 @@ oiab MACH_OIAB OIAB 1269
- smdk6400 MACH_SMDK6400 SMDK6400 1270
- nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
- greenphone MACH_GREENPHONE GREENPHONE 1272
--compex42x MACH_COMPEXWP18 COMPEXWP18 1273
-+compex MACH_COMPEX COMPEX 1273
- xmate MACH_XMATE XMATE 1274
- energizer MACH_ENERGIZER ENERGIZER 1275
- ime1 MACH_IME1 IME1 1276
diff --git a/target/linux/ixp4xx/patches-2.6.23/121-compex_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/121-compex_mac_plat_info.patch
deleted file mode 100644
index f7ff4619c8..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/121-compex_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/compex-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -90,9 +90,36 @@ static struct platform_device compex_uar
- .resource = compex_uart_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info compex_plat_eth[] = {
-+ {
-+ .phy = -1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 3,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device compex_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = compex_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = compex_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *compex_devices[] __initdata = {
- &compex_flash,
-- &compex_uart
-+ &compex_uart,
-+ &compex_eth[0],
-+ &compex_eth[1],
- };
-
- static void __init compex_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.23/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.23/130-wrt300nv2_support.patch
deleted file mode 100644
index 1dcc85bb2e..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/130-wrt300nv2_support.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -73,6 +73,14 @@ config MACH_COMPEX
- WP18 or NP18A boards. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_WRT300NV2
-+ bool "Linksys WRT300N v2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys'
-+ WRT300N v2 router. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-
- obj-y += common.o
-
-@@ -34,5 +35,6 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-@@ -0,0 +1,65 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
-+ *
-+ * PCI setup routines for Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wrt300nv2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci wrt300nv2_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wrt300nv2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wrt300nv2_map_irq,
-+};
-+
-+int __init wrt300nv2_pci_init(void)
-+{
-+ if (machine_is_wrt300nv2())
-+ pci_common_init(&wrt300nv2_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wrt300nv2_pci_init);
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+ *
-+ * Board setup for the Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wrt300nv2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wrt300nv2_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wrt300nv2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wrt300nv2_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_flash_resource,
-+};
-+
-+static struct resource wrt300nv2_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wrt300nv2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wrt300nv2_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_uart_resource,
-+};
-+
-+static struct platform_device *wrt300nv2_devices[] __initdata = {
-+ &wrt300nv2_flash,
-+ &wrt300nv2_uart
-+};
-+
-+static void __init wrt300nv2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WRT300NV2
-+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wrt300nv2_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -42,7 +42,7 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_pronghorn_metro())
-+ machine_is_pronghorn_metro() || machine_is_wrt300nv2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.23/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/131-wrt300nv2_mac_plat_info.patch
deleted file mode 100644
index c4e52f9f3b..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/131-wrt300nv2_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device wrt300nv2_
- .resource = &wrt300nv2_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wrt300nv2_plat_eth[] = {
-+ {
-+ .phy = -1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device wrt300nv2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wrt300nv2_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = wrt300nv2_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *wrt300nv2_devices[] __initdata = {
- &wrt300nv2_flash,
-- &wrt300nv2_uart
-+ &wrt300nv2_uart,
-+ &wrt300nv2_eth[0],
-+ &wrt300nv2_eth[1],
- };
-
- static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.23/140-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.23/140-sidewinder_support.patch
deleted file mode 100644
index 024eb6198e..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/140-sidewinder_support.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
- Engineering Pronghorn Metro Platform. For more
- information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_SIDEWINDER
-+ bool "Sidewinder"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Sidewinder Platform. For more
-+ information on this platform, see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_COMPEX
- bool "Compex WP18 / NP18A"
- select PCI
-@@ -163,7 +171,7 @@ config MACH_FSG
- #
- config CPU_IXP46X
- bool
-- depends on MACH_IXDP465
-+ depends on MACH_IXDP465 || MACH_SIDEWINDER
- default y
-
- config CPU_IXP43X
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-+obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-
- obj-y += common.o
-
-@@ -36,5 +37,6 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o f
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-+obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/sidewinder-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/sidewinder-pci.c
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init sidewinder_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init sidewinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else return -1;
-+}
-+
-+struct hw_pci sidewinder_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = sidewinder_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = sidewinder_map_irq,
-+};
-+
-+int __init sidewinder_pci_init(void)
-+{
-+ if (machine_is_sidewinder())
-+ pci_common_init(&sidewinder_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(sidewinder_pci_init);
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/sidewinder-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,115 @@
-+/*
-+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
-+ *
-+ * Board setup for the ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data sidewinder_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource sidewinder_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device sidewinder_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &sidewinder_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &sidewinder_flash_resource,
-+};
-+
-+static struct resource sidewinder_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port sidewinder_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device sidewinder_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = sidewinder_uart_data,
-+ },
-+ .num_resources = ARRAY_SIZE(sidewinder_uart_resources),
-+ .resource = sidewinder_uart_resources,
-+};
-+
-+static struct platform_device *sidewinder_devices[] __initdata = {
-+ &sidewinder_flash,
-+ &sidewinder_uart,
-+};
-+
-+static void __init sidewinder_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
-+}
-+
-+#ifdef CONFIG_MACH_SIDEWINDER
-+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = sidewinder_init,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-2.6.23/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.23/150-lanready_ap1000_support.patch
deleted file mode 100644
index 8e0bf60288..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/150-lanready_ap1000_support.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ap1000-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,151 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap1000-setup.c
-+ *
-+ * Lanready AP-1000
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data ap1000_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource ap1000_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device ap1000_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ap1000_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap1000_flash_resource,
-+};
-+
-+static struct resource ap1000_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port ap1000_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device ap1000_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = ap1000_uart_data,
-+ .num_resources = 2,
-+ .resource = ap1000_uart_resources
-+};
-+
-+static struct platform_device *ap1000_devices[] __initdata = {
-+ &ap1000_flash,
-+ &ap1000_uart
-+};
-+
-+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init ap1000_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init ap1000_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ap1000_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP1000
-+MACHINE_START(AP1000, "Lanready AP-1000")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = ap1000_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = ap1000_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,8 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
-+ machine_is_ixdp465() || machine_is_kixrp435() ||
-+ machine_is_compex() || machine_is_ap1000())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,14 @@ config MACH_WRT300NV2
- WRT300N v2 router. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_AP1000
-+ bool "Lanready AP-1000"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Lanready's
-+ AP1000 board. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) +=
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-+obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -38,5 +39,6 @@ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pro
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-+obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.23.17/arch/arm/tools/mach-types
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/tools/mach-types
-+++ linux-2.6.23.17/arch/arm/tools/mach-types
-@@ -1367,3 +1367,4 @@ db88f5281 MACH_DB88F5281 DB88F5281 13
- csb726 MACH_CSB726 CSB726 1359
- tik27 MACH_TIK27 TIK27 1360
- mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
-+ap1000 MACH_AP1000 AP1000 1543
diff --git a/target/linux/ixp4xx/patches-2.6.23/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/151-lanready_ap1000_mac_plat_info.patch
deleted file mode 100644
index 7ad022d32f..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/151-lanready_ap1000_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ap1000-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -90,9 +90,36 @@ static struct platform_device ap1000_uar
- .resource = ap1000_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ap1000_plat_eth[] = {
-+ {
-+ .phy = 4,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 5,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ap1000_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ap1000_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ap1000_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *ap1000_devices[] __initdata = {
- &ap1000_flash,
-- &ap1000_uart
-+ &ap1000_uart,
-+ &ap1000_eth[0],
-+ &ap1000_eth[1],
- };
-
- static char ap1000_mem_fixup[] __initdata = "mem=64M ";
diff --git a/target/linux/ixp4xx/patches-2.6.23/160-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.23/160-wg302v1_support.patch
deleted file mode 100644
index 590a751348..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/160-wg302v1_support.patch
+++ /dev/null
@@ -1,221 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
-+config MACH_WG302V1
-+ bool "Netgear WG302 v1 / WAG302 v1"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Netgear's
-+ WG302 v1 or WAG302 v1 Access Points. For more information
-+ on this platform, see http://openwrt.org
-+
- config MACH_WG302V2
- bool "Netgear WG302 v2 / WAG302 v2"
- select PCI
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v1-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v1-pci.c
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
-+ *
-+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init wg302v1_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else return -1;
-+}
-+
-+struct hw_pci wg302v1_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wg302v1_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wg302v1_map_irq,
-+};
-+
-+int __init wg302v1_pci_init(void)
-+{
-+ if (machine_is_wg302v1())
-+ pci_common_init(&wg302v1_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wg302v1_pci_init);
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,109 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
-+ *
-+ * Board setup for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wg302v1_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wg302v1_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wg302v1_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wg302v1_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v1_flash_resource,
-+};
-+
-+static struct resource wg302v1_uart_resource = {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wg302v1_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wg302v1_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wg302v1_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v1_uart_resource,
-+};
-+
-+static struct platform_device *wg302v1_devices[] __initdata = {
-+ &wg302v1_flash,
-+ &wg302v1_uart,
-+};
-+
-+static void __init wg302v1_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WG302V1
-+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wg302v1_init,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-2.6.23/161-wg302v1_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/161-wg302v1_mac_plat_info.patch
deleted file mode 100644
index 608f036a28..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/161-wg302v1_mac_plat_info.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -77,9 +77,27 @@ static struct platform_device wg302v1_ua
- .resource = &wg302v1_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wg302_plat_eth[] = {
-+ {
-+ .phy = 30,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302_plat_eth,
-+ }
-+};
-+
- static struct platform_device *wg302v1_devices[] __initdata = {
- &wg302v1_flash,
- &wg302v1_uart,
-+ &wg302_eth[0],
- };
-
- static void __init wg302v1_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.23/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.23/162-wg302v1_mem_fixup.patch
deleted file mode 100644
index 71a2e7ff85..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/162-wg302v1_mem_fixup.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -100,6 +100,36 @@ static struct platform_device *wg302v1_d
- &wg302_eth[0],
- };
-
-+static char wg302v1_mem_fixup[] __initdata = "mem=32M ";
-+
-+static void __init wg302v1_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(wg302v1_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, wg302v1_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(wg302v1_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(wg302v1_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init wg302v1_init(void)
- {
- ixp4xx_sys_init();
-@@ -118,6 +148,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1
- /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = wg302v1_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.23/200-npe_driver.patch b/target/linux/ixp4xx/patches-2.6.23/200-npe_driver.patch
deleted file mode 100644
index 6e9aaa97a3..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/200-npe_driver.patch
+++ /dev/null
@@ -1,4044 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/kernel/setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/kernel/setup.c
-+++ linux-2.6.23.17/arch/arm/kernel/setup.c
-@@ -62,6 +62,7 @@ extern int root_mountflags;
- extern void _stext, _text, _etext, __data_start, _edata, _end;
-
- unsigned int processor_id;
-+EXPORT_SYMBOL(processor_id);
- unsigned int __machine_arch_type;
- EXPORT_SYMBOL(__machine_arch_type);
-
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -246,6 +246,20 @@ config IXP4XX_INDIRECT_PCI
- need to use the indirect method instead. If you don't know
- what you need, leave this option unselected.
-
-+config IXP4XX_QMGR
-+ tristate "IXP4xx Queue Manager support"
-+ help
-+ This driver supports IXP4xx built-in hardware queue manager
-+ and is automatically selected by Ethernet and HSS drivers.
-+
-+config IXP4XX_NPE
-+ tristate "IXP4xx Network Processor Engine support"
-+ select HOTPLUG
-+ select FW_LOADER
-+ help
-+ This driver supports IXP4xx built-in network coprocessors
-+ and is automatically selected by Ethernet and HSS drivers.
-+
- endmenu
-
- endif
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
-@@ -44,3 +44,5 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -177,6 +177,31 @@ static struct platform_device ixdp425_ua
- .resource = ixdp425_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdp425_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ixdp425_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ixdp425_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ixdp425_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *ixdp425_devices[] __initdata = {
- &ixdp425_i2c_gpio,
- &ixdp425_flash,
-@@ -184,7 +209,9 @@ static struct platform_device *ixdp425_d
- defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
- &ixdp425_flash_nand,
- #endif
-- &ixdp425_uart
-+ &ixdp425_uart,
-+ &ixdp425_eth[0],
-+ &ixdp425_eth[1],
- };
-
- static void __init ixdp425_init(void)
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -0,0 +1,741 @@
-+/*
-+ * Intel IXP4xx Network Processor Engine driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ *
-+ * The code is based on publicly available information:
-+ * - Intel IXP4xx Developer's Manual and other e-papers
-+ * - Intel IXP400 Access Library Software (BSD license)
-+ * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ * Thanks, Christian.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/firmware.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <asm/arch/npe.h>
-+
-+#define DEBUG_MSG 0
-+#define DEBUG_FW 0
-+
-+#define NPE_COUNT 3
-+#define MAX_RETRIES 1000 /* microseconds */
-+#define NPE_42X_DATA_SIZE 0x800 /* in dwords */
-+#define NPE_46X_DATA_SIZE 0x1000
-+#define NPE_A_42X_INSTR_SIZE 0x1000
-+#define NPE_B_AND_C_42X_INSTR_SIZE 0x800
-+#define NPE_46X_INSTR_SIZE 0x1000
-+#define REGS_SIZE 0x1000
-+
-+#define NPE_PHYS_REG 32
-+
-+#define FW_MAGIC 0xFEEDF00D
-+#define FW_BLOCK_TYPE_INSTR 0x0
-+#define FW_BLOCK_TYPE_DATA 0x1
-+#define FW_BLOCK_TYPE_EOF 0xF
-+
-+/* NPE exec status (read) and command (write) */
-+#define CMD_NPE_STEP 0x01
-+#define CMD_NPE_START 0x02
-+#define CMD_NPE_STOP 0x03
-+#define CMD_NPE_CLR_PIPE 0x04
-+#define CMD_CLR_PROFILE_CNT 0x0C
-+#define CMD_RD_INS_MEM 0x10 /* instruction memory */
-+#define CMD_WR_INS_MEM 0x11
-+#define CMD_RD_DATA_MEM 0x12 /* data memory */
-+#define CMD_WR_DATA_MEM 0x13
-+#define CMD_RD_ECS_REG 0x14 /* exec access register */
-+#define CMD_WR_ECS_REG 0x15
-+
-+#define STAT_RUN 0x80000000
-+#define STAT_STOP 0x40000000
-+#define STAT_CLEAR 0x20000000
-+#define STAT_ECS_K 0x00800000 /* pipeline clean */
-+
-+#define NPE_STEVT 0x1B
-+#define NPE_STARTPC 0x1C
-+#define NPE_REGMAP 0x1E
-+#define NPE_CINDEX 0x1F
-+
-+#define INSTR_WR_REG_SHORT 0x0000C000
-+#define INSTR_WR_REG_BYTE 0x00004000
-+#define INSTR_RD_FIFO 0x0F888220
-+#define INSTR_RESET_MBOX 0x0FAC8210
-+
-+#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */
-+#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */
-+#define ECS_BG_CTXT_REG_2 0x02
-+#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */
-+#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */
-+#define ECS_PRI_1_CTXT_REG_2 0x06
-+#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */
-+#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */
-+#define ECS_PRI_2_CTXT_REG_2 0x0A
-+#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */
-+#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */
-+#define ECS_DBG_CTXT_REG_2 0x0E
-+#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */
-+
-+#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */
-+#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */
-+#define ECS_REG_0_LDUR_BITS 8
-+#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */
-+#define ECS_REG_1_CCTXT_BITS 16
-+#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */
-+#define ECS_REG_1_SELCTXT_BITS 0
-+#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */
-+#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */
-+#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */
-+
-+/* NPE watchpoint_fifo register bit */
-+#define WFIFO_VALID 0x80000000
-+
-+/* NPE messaging_status register bit definitions */
-+#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */
-+#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */
-+#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */
-+#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */
-+#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */
-+#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */
-+#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */
-+#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */
-+
-+/* NPE messaging_control register bit definitions */
-+#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */
-+#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */
-+#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */
-+#define MSGCTL_IN_FIFO_WRITE 0x02000000
-+
-+/* NPE mailbox_status value for reset */
-+#define RESET_MBOX_STAT 0x0000F0F0
-+
-+const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
-+
-+#define print_npe(pri, npe, fmt, ...) \
-+ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
-+
-+#if DEBUG_MSG
-+#define debug_msg(npe, fmt, ...) \
-+ print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
-+#else
-+#define debug_msg(npe, fmt, ...)
-+#endif
-+
-+static struct {
-+ u32 reg, val;
-+} ecs_reset[] = {
-+ { ECS_BG_CTXT_REG_0, 0xA0000000 },
-+ { ECS_BG_CTXT_REG_1, 0x01000000 },
-+ { ECS_BG_CTXT_REG_2, 0x00008000 },
-+ { ECS_PRI_1_CTXT_REG_0, 0x20000080 },
-+ { ECS_PRI_1_CTXT_REG_1, 0x01000000 },
-+ { ECS_PRI_1_CTXT_REG_2, 0x00008000 },
-+ { ECS_PRI_2_CTXT_REG_0, 0x20000080 },
-+ { ECS_PRI_2_CTXT_REG_1, 0x01000000 },
-+ { ECS_PRI_2_CTXT_REG_2, 0x00008000 },
-+ { ECS_DBG_CTXT_REG_0, 0x20000000 },
-+ { ECS_DBG_CTXT_REG_1, 0x00000000 },
-+ { ECS_DBG_CTXT_REG_2, 0x001E0000 },
-+ { ECS_INSTRUCT_REG, 0x1003C00F },
-+};
-+
-+static struct npe npe_tab[NPE_COUNT] = {
-+ {
-+ .id = 0,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEA_BASE_PHYS,
-+ }, {
-+ .id = 1,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEB_BASE_PHYS,
-+ }, {
-+ .id = 2,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEC_BASE_PHYS,
-+ }
-+};
-+
-+int npe_running(struct npe *npe)
-+{
-+ return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
-+}
-+
-+static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
-+{
-+ __raw_writel(data, &npe->regs->exec_data);
-+ __raw_writel(addr, &npe->regs->exec_addr);
-+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
-+}
-+
-+static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
-+{
-+ __raw_writel(addr, &npe->regs->exec_addr);
-+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
-+ /* Iintroduce extra read cycles after issuing read command to NPE
-+ so that we read the register after the NPE has updated it.
-+ This is to overcome race condition between XScale and NPE */
-+ __raw_readl(&npe->regs->exec_data);
-+ __raw_readl(&npe->regs->exec_data);
-+ return __raw_readl(&npe->regs->exec_data);
-+}
-+
-+static void npe_clear_active(struct npe *npe, u32 reg)
-+{
-+ u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
-+ npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
-+}
-+
-+static void npe_start(struct npe *npe)
-+{
-+ /* ensure only Background Context Stack Level is active */
-+ npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
-+ npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
-+ npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
-+
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-+ __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
-+}
-+
-+static void npe_stop(struct npe *npe)
-+{
-+ __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
-+}
-+
-+static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
-+ u32 ldur)
-+{
-+ u32 wc;
-+ int i;
-+
-+ /* set the Active bit, and the LDUR, in the debug level */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
-+ ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
-+
-+ /* set CCTXT at ECS DEBUG L3 to specify in which context to execute
-+ the instruction, and set SELCTXT at ECS DEBUG Level to specify
-+ which context store to access.
-+ Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
-+ */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
-+ (ctx << ECS_REG_1_CCTXT_BITS) |
-+ (ctx << ECS_REG_1_SELCTXT_BITS));
-+
-+ /* clear the pipeline */
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-+
-+ /* load NPE instruction into the instruction register */
-+ npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
-+
-+ /* we need this value later to wait for completion of NPE execution
-+ step */
-+ wc = __raw_readl(&npe->regs->watch_count);
-+
-+ /* issue a Step One command via the Execution Control register */
-+ __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
-+
-+ /* Watch Count register increments when NPE completes an instruction */
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (wc != __raw_readl(&npe->regs->watch_count))
-+ return 0;
-+ udelay(1);
-+ }
-+
-+ print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
-+ return -ETIMEDOUT;
-+}
-+
-+static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
-+ u8 val, u32 ctx)
-+{
-+ /* here we build the NPE assembler instruction: mov8 d0, #0 */
-+ u32 instr = INSTR_WR_REG_BYTE | /* OpCode */
-+ addr << 9 | /* base Operand */
-+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
-+ (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
-+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-+}
-+
-+static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
-+ u16 val, u32 ctx)
-+{
-+ /* here we build the NPE assembler instruction: mov16 d0, #0 */
-+ u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
-+ addr << 9 | /* base Operand */
-+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
-+ (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
-+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-+}
-+
-+static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
-+ u32 val, u32 ctx)
-+{
-+ /* write in 16 bit steps first the high and then the low value */
-+ if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
-+ return -ETIMEDOUT;
-+ return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
-+}
-+
-+static int npe_reset(struct npe *npe)
-+{
-+ u32 val, ctl, exec_count, ctx_reg2;
-+ int i;
-+
-+ ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
-+ 0x3F3FFFFF;
-+
-+ /* disable parity interrupt */
-+ __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
-+
-+ /* pre exec - debug instruction */
-+ /* turn off the halt bit by clearing Execution Count register. */
-+ exec_count = __raw_readl(&npe->regs->exec_count);
-+ __raw_writel(0, &npe->regs->exec_count);
-+ /* ensure that IF and IE are on (temporarily), so that we don't end up
-+ stepping forever */
-+ ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
-+ ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
-+
-+ /* clear the FIFOs */
-+ while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
-+ ;
-+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
-+ /* read from the outFIFO until empty */
-+ print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
-+ __raw_readl(&npe->regs->in_out_fifo));
-+
-+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
-+ /* step execution of the NPE intruction to read inFIFO using
-+ the Debug Executing Context stack */
-+ if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
-+ return -ETIMEDOUT;
-+
-+ /* reset the mailbox reg from the XScale side */
-+ __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
-+ /* from NPE side */
-+ if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
-+ return -ETIMEDOUT;
-+
-+ /* Reset the physical registers in the NPE register file */
-+ for (val = 0; val < NPE_PHYS_REG; val++) {
-+ if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
-+ return -ETIMEDOUT;
-+ /* address is either 0 or 4 */
-+ if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
-+ return -ETIMEDOUT;
-+ }
-+
-+ /* Reset the context store = each context's Context Store registers */
-+
-+ /* Context 0 has no STARTPC. Instead, this value is used to set NextPC
-+ for Background ECS, to set where NPE starts executing code */
-+ val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
-+ val &= ~ECS_REG_0_NEXTPC_MASK;
-+ val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
-+ npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
-+
-+ for (i = 0; i < 16; i++) {
-+ if (i) { /* Context 0 has no STEVT nor STARTPC */
-+ /* STEVT = off, 0x80 */
-+ if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
-+ return -ETIMEDOUT;
-+ if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
-+ return -ETIMEDOUT;
-+ }
-+ /* REGMAP = d0->p0, d8->p2, d16->p4 */
-+ if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
-+ return -ETIMEDOUT;
-+ if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
-+ return -ETIMEDOUT;
-+ }
-+
-+ /* post exec */
-+ /* clear active bit in debug level */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
-+ /* clear the pipeline */
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-+ /* restore previous values */
-+ __raw_writel(exec_count, &npe->regs->exec_count);
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
-+
-+ /* write reset values to Execution Context Stack registers */
-+ for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
-+ npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
-+ ecs_reset[val].val);
-+
-+ /* clear the profile counter */
-+ __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
-+
-+ __raw_writel(0, &npe->regs->exec_count);
-+ __raw_writel(0, &npe->regs->action_points[0]);
-+ __raw_writel(0, &npe->regs->action_points[1]);
-+ __raw_writel(0, &npe->regs->action_points[2]);
-+ __raw_writel(0, &npe->regs->action_points[3]);
-+ __raw_writel(0, &npe->regs->watch_count);
-+
-+ val = ixp4xx_read_feature_bits();
-+ /* reset the NPE */
-+ ixp4xx_write_feature_bits(val &
-+ ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (!(ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
-+ break; /* reset completed */
-+ udelay(1);
-+ }
-+ if (i == MAX_RETRIES)
-+ return -ETIMEDOUT;
-+
-+ /* deassert reset */
-+ ixp4xx_write_feature_bits(val |
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id));
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id))
-+ break; /* NPE is back alive */
-+ udelay(1);
-+ }
-+ if (i == MAX_RETRIES)
-+ return -ETIMEDOUT;
-+
-+ npe_stop(npe);
-+
-+ /* restore NPE configuration bus Control Register - parity settings */
-+ __raw_writel(ctl, &npe->regs->messaging_control);
-+ return 0;
-+}
-+
-+
-+int npe_send_message(struct npe *npe, const void *msg, const char *what)
-+{
-+ const u32 *send = msg;
-+ int cycles = 0;
-+
-+ debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
-+ what, send[0], send[1]);
-+
-+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
-+ debug_msg(npe, "NPE input FIFO not empty\n");
-+ return -EIO;
-+ }
-+
-+ __raw_writel(send[0], &npe->regs->in_out_fifo);
-+
-+ if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
-+ debug_msg(npe, "NPE input FIFO full\n");
-+ return -EIO;
-+ }
-+
-+ __raw_writel(send[1], &npe->regs->in_out_fifo);
-+
-+ while ((cycles < MAX_RETRIES) &&
-+ (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
-+ udelay(1);
-+ cycles++;
-+ }
-+
-+ if (cycles == MAX_RETRIES) {
-+ debug_msg(npe, "Timeout sending message\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ debug_msg(npe, "Sending a message took %i cycles\n", cycles);
-+ return 0;
-+}
-+
-+int npe_recv_message(struct npe *npe, void *msg, const char *what)
-+{
-+ u32 *recv = msg;
-+ int cycles = 0, cnt = 0;
-+
-+ debug_msg(npe, "Trying to receive message %s\n", what);
-+
-+ while (cycles < MAX_RETRIES) {
-+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
-+ recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
-+ if (cnt == 2)
-+ break;
-+ } else {
-+ udelay(1);
-+ cycles++;
-+ }
-+ }
-+
-+ switch(cnt) {
-+ case 1:
-+ debug_msg(npe, "Received [%08X]\n", recv[0]);
-+ break;
-+ case 2:
-+ debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
-+ break;
-+ }
-+
-+ if (cycles == MAX_RETRIES) {
-+ debug_msg(npe, "Timeout waiting for message\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
-+ return 0;
-+}
-+
-+int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
-+{
-+ int result;
-+ u32 *send = msg, recv[2];
-+
-+ if ((result = npe_send_message(npe, msg, what)) != 0)
-+ return result;
-+ if ((result = npe_recv_message(npe, recv, what)) != 0)
-+ return result;
-+
-+ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
-+ debug_msg(npe, "Message %s: unexpected message received\n",
-+ what);
-+ return -EIO;
-+ }
-+ return 0;
-+}
-+
-+
-+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
-+{
-+ const struct firmware *fw_entry;
-+
-+ struct dl_block {
-+ u32 type;
-+ u32 offset;
-+ } *blk;
-+
-+ struct dl_image {
-+ u32 magic;
-+ u32 id;
-+ u32 size;
-+ union {
-+ u32 data[0];
-+ struct dl_block blocks[0];
-+ };
-+ } *image;
-+
-+ struct dl_codeblock {
-+ u32 npe_addr;
-+ u32 size;
-+ u32 data[0];
-+ } *cb;
-+
-+ int i, j, err, data_size, instr_size, blocks, table_end;
-+ u32 cmd;
-+
-+ if ((err = request_firmware(&fw_entry, name, dev)) != 0)
-+ return err;
-+
-+ err = -EINVAL;
-+ if (fw_entry->size < sizeof(struct dl_image)) {
-+ print_npe(KERN_ERR, npe, "incomplete firmware file\n");
-+ goto err;
-+ }
-+ image = (struct dl_image*)fw_entry->data;
-+
-+#if DEBUG_FW
-+ print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
-+ image->magic, image->id, image->size, image->size * 4);
-+#endif
-+
-+ if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
-+ image->id = swab32(image->id);
-+ image->size = swab32(image->size);
-+ } else if (image->magic != FW_MAGIC) {
-+ print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
-+ image->magic);
-+ goto err;
-+ }
-+ if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
-+ print_npe(KERN_ERR, npe,
-+ "inconsistent size of firmware file\n");
-+ goto err;
-+ }
-+ if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
-+ print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
-+ goto err;
-+ }
-+ if (image->magic == swab32(FW_MAGIC))
-+ for (i = 0; i < image->size; i++)
-+ image->data[i] = swab32(image->data[i]);
-+
-+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
-+ print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
-+ "IXP42x\n");
-+ goto err;
-+ }
-+
-+ if (npe_running(npe)) {
-+ print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
-+ "already running\n");
-+ err = -EBUSY;
-+ goto err;
-+ }
-+#if 0
-+ npe_stop(npe);
-+ npe_reset(npe);
-+#endif
-+
-+ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
-+ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
-+ (image->id >> 8) & 0xFF, image->id & 0xFF);
-+
-+ if (!cpu_is_ixp46x()) {
-+ if (!npe->id)
-+ instr_size = NPE_A_42X_INSTR_SIZE;
-+ else
-+ instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
-+ data_size = NPE_42X_DATA_SIZE;
-+ } else {
-+ instr_size = NPE_46X_INSTR_SIZE;
-+ data_size = NPE_46X_DATA_SIZE;
-+ }
-+
-+ for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
-+ blocks++)
-+ if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
-+ break;
-+ if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
-+ print_npe(KERN_INFO, npe, "firmware EOF block marker not "
-+ "found\n");
-+ goto err;
-+ }
-+
-+#if DEBUG_FW
-+ print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
-+#endif
-+
-+ table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
-+ for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
-+ if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
-+ || blk->offset < table_end) {
-+ print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
-+ "firmware block #%i\n", blk->offset, i);
-+ goto err;
-+ }
-+
-+ cb = (struct dl_codeblock*)&image->data[blk->offset];
-+ if (blk->type == FW_BLOCK_TYPE_INSTR) {
-+ if (cb->npe_addr + cb->size > instr_size)
-+ goto too_big;
-+ cmd = CMD_WR_INS_MEM;
-+ } else if (blk->type == FW_BLOCK_TYPE_DATA) {
-+ if (cb->npe_addr + cb->size > data_size)
-+ goto too_big;
-+ cmd = CMD_WR_DATA_MEM;
-+ } else {
-+ print_npe(KERN_INFO, npe, "invalid firmware block #%i "
-+ "type 0x%X\n", i, blk->type);
-+ goto err;
-+ }
-+ if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
-+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
-+ "fit in firmware image: type %c, start 0x%X,"
-+ " length 0x%X\n", i,
-+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-+ cb->npe_addr, cb->size);
-+ goto err;
-+ }
-+
-+ for (j = 0; j < cb->size; j++)
-+ npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
-+ }
-+
-+ npe_start(npe);
-+ if (!npe_running(npe))
-+ print_npe(KERN_ERR, npe, "unable to start\n");
-+ release_firmware(fw_entry);
-+ return 0;
-+
-+too_big:
-+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
-+ "memory: type %c, start 0x%X, length 0x%X\n", i,
-+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-+ cb->npe_addr, cb->size);
-+err:
-+ release_firmware(fw_entry);
-+ return err;
-+}
-+
-+
-+struct npe *npe_request(int id)
-+{
-+ if (id < NPE_COUNT)
-+ if (npe_tab[id].valid)
-+ if (try_module_get(THIS_MODULE))
-+ return &npe_tab[id];
-+ return NULL;
-+}
-+
-+void npe_release(struct npe *npe)
-+{
-+ module_put(THIS_MODULE);
-+}
-+
-+
-+static int __init npe_init_module(void)
-+{
-+
-+ int i, found = 0;
-+
-+ for (i = 0; i < NPE_COUNT; i++) {
-+ struct npe *npe = &npe_tab[i];
-+ if (!(ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << i)))
-+ continue; /* NPE already disabled or not present */
-+ if (!(npe->mem_res = request_mem_region(npe->regs_phys,
-+ REGS_SIZE,
-+ npe_name(npe)))) {
-+ print_npe(KERN_ERR, npe,
-+ "failed to request memory region\n");
-+ continue;
-+ }
-+
-+ if (npe_reset(npe))
-+ continue;
-+ npe->valid = 1;
-+ found++;
-+ }
-+
-+ if (!found)
-+ return -ENOSYS;
-+ return 0;
-+}
-+
-+static void __exit npe_cleanup_module(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < NPE_COUNT; i++)
-+ if (npe_tab[i].mem_res) {
-+ npe_reset(&npe_tab[i]);
-+ release_resource(npe_tab[i].mem_res);
-+ }
-+}
-+
-+module_init(npe_init_module);
-+module_exit(npe_cleanup_module);
-+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_LICENSE("GPL v2");
-+
-+EXPORT_SYMBOL(npe_names);
-+EXPORT_SYMBOL(npe_running);
-+EXPORT_SYMBOL(npe_request);
-+EXPORT_SYMBOL(npe_release);
-+EXPORT_SYMBOL(npe_load_firmware);
-+EXPORT_SYMBOL(npe_send_message);
-+EXPORT_SYMBOL(npe_recv_message);
-+EXPORT_SYMBOL(npe_send_recv_message);
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-@@ -0,0 +1,274 @@
-+/*
-+ * Intel IXP4xx Queue Manager driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <asm/arch/qmgr.h>
-+
-+#define DEBUG 0
-+
-+struct qmgr_regs __iomem *qmgr_regs;
-+static struct resource *mem_res;
-+static spinlock_t qmgr_lock;
-+static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-+static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-+static void *irq_pdevs[HALF_QUEUES];
-+
-+void qmgr_set_irq(unsigned int queue, int src,
-+ void (*handler)(void *pdev), void *pdev)
-+{
-+ u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
-+ int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
-+ unsigned long flags;
-+
-+ src &= 7;
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
-+ irq_handlers[queue] = handler;
-+ irq_pdevs[queue] = pdev;
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
-+}
-+
-+
-+static irqreturn_t qmgr_irq1(int irq, void *pdev)
-+{
-+ int i;
-+ u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
-+ __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-+
-+ for (i = 0; i < HALF_QUEUES; i++)
-+ if (val & (1 << i))
-+ irq_handlers[i](irq_pdevs[i]);
-+
-+ return val ? IRQ_HANDLED : 0;
-+}
-+
-+
-+void qmgr_enable_irq(unsigned int queue)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
-+ &qmgr_regs->irqen[0]);
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
-+}
-+
-+void qmgr_disable_irq(unsigned int queue)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
-+ &qmgr_regs->irqen[0]);
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
-+}
-+
-+static inline void shift_mask(u32 *mask)
-+{
-+ mask[3] = mask[3] << 1 | mask[2] >> 31;
-+ mask[2] = mask[2] << 1 | mask[1] >> 31;
-+ mask[1] = mask[1] << 1 | mask[0] >> 31;
-+ mask[0] <<= 1;
-+}
-+
-+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-+ unsigned int nearly_empty_watermark,
-+ unsigned int nearly_full_watermark)
-+{
-+ u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
-+ int err;
-+
-+ if (queue >= HALF_QUEUES)
-+ return -ERANGE;
-+
-+ if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
-+ return -EINVAL;
-+
-+ switch (len) {
-+ case 16:
-+ cfg = 0 << 24;
-+ mask[0] = 0x1;
-+ break;
-+ case 32:
-+ cfg = 1 << 24;
-+ mask[0] = 0x3;
-+ break;
-+ case 64:
-+ cfg = 2 << 24;
-+ mask[0] = 0xF;
-+ break;
-+ case 128:
-+ cfg = 3 << 24;
-+ mask[0] = 0xFF;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ cfg |= nearly_empty_watermark << 26;
-+ cfg |= nearly_full_watermark << 29;
-+ len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */
-+ mask[1] = mask[2] = mask[3] = 0;
-+
-+ if (!try_module_get(THIS_MODULE))
-+ return -ENODEV;
-+
-+ spin_lock_irq(&qmgr_lock);
-+ if (__raw_readl(&qmgr_regs->sram[queue])) {
-+ err = -EBUSY;
-+ goto err;
-+ }
-+
-+ while (1) {
-+ if (!(used_sram_bitmap[0] & mask[0]) &&
-+ !(used_sram_bitmap[1] & mask[1]) &&
-+ !(used_sram_bitmap[2] & mask[2]) &&
-+ !(used_sram_bitmap[3] & mask[3]))
-+ break; /* found free space */
-+
-+ addr++;
-+ shift_mask(mask);
-+ if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
-+ printk(KERN_ERR "qmgr: no free SRAM space for"
-+ " queue %i\n", queue);
-+ err = -ENOMEM;
-+ goto err;
-+ }
-+ }
-+
-+ used_sram_bitmap[0] |= mask[0];
-+ used_sram_bitmap[1] |= mask[1];
-+ used_sram_bitmap[2] |= mask[2];
-+ used_sram_bitmap[3] |= mask[3];
-+ __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
-+ spin_unlock_irq(&qmgr_lock);
-+
-+#if DEBUG
-+ printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
-+ queue, addr);
-+#endif
-+ return 0;
-+
-+err:
-+ spin_unlock_irq(&qmgr_lock);
-+ module_put(THIS_MODULE);
-+ return err;
-+}
-+
-+void qmgr_release_queue(unsigned int queue)
-+{
-+ u32 cfg, addr, mask[4];
-+
-+ BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
-+
-+ spin_lock_irq(&qmgr_lock);
-+ cfg = __raw_readl(&qmgr_regs->sram[queue]);
-+ addr = (cfg >> 14) & 0xFF;
-+
-+ BUG_ON(!addr); /* not requested */
-+
-+ switch ((cfg >> 24) & 3) {
-+ case 0: mask[0] = 0x1; break;
-+ case 1: mask[0] = 0x3; break;
-+ case 2: mask[0] = 0xF; break;
-+ case 3: mask[0] = 0xFF; break;
-+ }
-+
-+ while (addr--)
-+ shift_mask(mask);
-+
-+ __raw_writel(0, &qmgr_regs->sram[queue]);
-+
-+ used_sram_bitmap[0] &= ~mask[0];
-+ used_sram_bitmap[1] &= ~mask[1];
-+ used_sram_bitmap[2] &= ~mask[2];
-+ used_sram_bitmap[3] &= ~mask[3];
-+ irq_handlers[queue] = NULL; /* catch IRQ bugs */
-+ spin_unlock_irq(&qmgr_lock);
-+
-+ module_put(THIS_MODULE);
-+#if DEBUG
-+ printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
-+#endif
-+}
-+
-+static int qmgr_init(void)
-+{
-+ int i, err;
-+ mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
-+ IXP4XX_QMGR_REGION_SIZE,
-+ "IXP4xx Queue Manager");
-+ if (mem_res == NULL)
-+ return -EBUSY;
-+
-+ qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+ if (qmgr_regs == NULL) {
-+ err = -ENOMEM;
-+ goto error_map;
-+ }
-+
-+ /* reset qmgr registers */
-+ for (i = 0; i < 4; i++) {
-+ __raw_writel(0x33333333, &qmgr_regs->stat1[i]);
-+ __raw_writel(0, &qmgr_regs->irqsrc[i]);
-+ }
-+ for (i = 0; i < 2; i++) {
-+ __raw_writel(0, &qmgr_regs->stat2[i]);
-+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
-+ __raw_writel(0, &qmgr_regs->irqen[i]);
-+ }
-+
-+ for (i = 0; i < QUEUES; i++)
-+ __raw_writel(0, &qmgr_regs->sram[i]);
-+
-+ err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
-+ "IXP4xx Queue Manager", NULL);
-+ if (err) {
-+ printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
-+ IRQ_IXP4XX_QM1);
-+ goto error_irq;
-+ }
-+
-+ used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
-+ spin_lock_init(&qmgr_lock);
-+
-+ printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
-+ return 0;
-+
-+error_irq:
-+ iounmap(qmgr_regs);
-+error_map:
-+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+ return err;
-+}
-+
-+static void qmgr_remove(void)
-+{
-+ free_irq(IRQ_IXP4XX_QM1, NULL);
-+ synchronize_irq(IRQ_IXP4XX_QM1);
-+ iounmap(qmgr_regs);
-+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+}
-+
-+module_init(qmgr_init);
-+module_exit(qmgr_remove);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Krzysztof Halasa");
-+
-+EXPORT_SYMBOL(qmgr_regs);
-+EXPORT_SYMBOL(qmgr_set_irq);
-+EXPORT_SYMBOL(qmgr_enable_irq);
-+EXPORT_SYMBOL(qmgr_disable_irq);
-+EXPORT_SYMBOL(qmgr_request_queue);
-+EXPORT_SYMBOL(qmgr_release_queue);
-Index: linux-2.6.23.17/drivers/net/arm/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/arm/Kconfig
-+++ linux-2.6.23.17/drivers/net/arm/Kconfig
-@@ -47,3 +47,13 @@ config EP93XX_ETH
- help
- This is a driver for the ethernet hardware included in EP93xx CPUs.
- Say Y if you are building a kernel for EP93xx based devices.
-+
-+config IXP4XX_ETH
-+ tristate "IXP4xx Ethernet support"
-+ depends on NET_ETHERNET && ARM && ARCH_IXP4XX
-+ select IXP4XX_NPE
-+ select IXP4XX_QMGR
-+ select MII
-+ help
-+ Say Y here if you want to use built-in Ethernet ports
-+ on IXP4xx processor.
-Index: linux-2.6.23.17/drivers/net/arm/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/arm/Makefile
-+++ linux-2.6.23.17/drivers/net/arm/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
- obj-$(CONFIG_ARM_ETHER1) += ether1.o
- obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
- obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
-+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
-Index: linux-2.6.23.17/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/drivers/net/arm/ixp4xx_eth.c
-@@ -0,0 +1,1259 @@
-+/*
-+ * Intel IXP4xx Ethernet driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ *
-+ * Ethernet port config (0x00 is not present on IXP42X):
-+ *
-+ * logical port 0x00 0x10 0x20
-+ * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C)
-+ * physical PortId 2 0 1
-+ * TX queue 23 24 25
-+ * RX-free queue 26 27 28
-+ * TX-done queue is always 31, per-port RX and TX-ready queues are configurable
-+ *
-+ *
-+ * Queue entries:
-+ * bits 0 -> 1 - NPE ID (RX and TX-done)
-+ * bits 0 -> 2 - priority (TX, per 802.1D)
-+ * bits 3 -> 4 - port ID (user-set?)
-+ * bits 5 -> 31 - physical descriptor address
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/etherdevice.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/mii.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/npe.h>
-+#include <asm/arch/qmgr.h>
-+
-+#define DEBUG_QUEUES 0
-+#define DEBUG_DESC 0
-+#define DEBUG_RX 0
-+#define DEBUG_TX 0
-+#define DEBUG_PKT_BYTES 0
-+#define DEBUG_MDIO 0
-+#define DEBUG_CLOSE 0
-+
-+#define DRV_NAME "ixp4xx_eth"
-+
-+#define MAX_NPES 3
-+
-+#define RX_DESCS 64 /* also length of all RX queues */
-+#define TX_DESCS 16 /* also length of all TX queues */
-+#define TXDONE_QUEUE_LEN 64 /* dwords */
-+
-+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define REGS_SIZE 0x1000
-+#define MAX_MRU 1536 /* 0x600 */
-+
-+#define MDIO_INTERVAL (3 * HZ)
-+#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */
-+#define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */
-+#define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */
-+
-+#define NPE_ID(port_id) ((port_id) >> 4)
-+#define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3)
-+#define TX_QUEUE(port_id) (NPE_ID(port_id) + 23)
-+#define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26)
-+#define TXDONE_QUEUE 31
-+
-+/* TX Control Registers */
-+#define TX_CNTRL0_TX_EN 0x01
-+#define TX_CNTRL0_HALFDUPLEX 0x02
-+#define TX_CNTRL0_RETRY 0x04
-+#define TX_CNTRL0_PAD_EN 0x08
-+#define TX_CNTRL0_APPEND_FCS 0x10
-+#define TX_CNTRL0_2DEFER 0x20
-+#define TX_CNTRL0_RMII 0x40 /* reduced MII */
-+#define TX_CNTRL1_RETRIES 0x0F /* 4 bits */
-+
-+/* RX Control Registers */
-+#define RX_CNTRL0_RX_EN 0x01
-+#define RX_CNTRL0_PADSTRIP_EN 0x02
-+#define RX_CNTRL0_SEND_FCS 0x04
-+#define RX_CNTRL0_PAUSE_EN 0x08
-+#define RX_CNTRL0_LOOP_EN 0x10
-+#define RX_CNTRL0_ADDR_FLTR_EN 0x20
-+#define RX_CNTRL0_RX_RUNT_EN 0x40
-+#define RX_CNTRL0_BCAST_DIS 0x80
-+#define RX_CNTRL1_DEFER_EN 0x01
-+
-+/* Core Control Register */
-+#define CORE_RESET 0x01
-+#define CORE_RX_FIFO_FLUSH 0x02
-+#define CORE_TX_FIFO_FLUSH 0x04
-+#define CORE_SEND_JAM 0x08
-+#define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */
-+
-+#define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \
-+ TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \
-+ TX_CNTRL0_2DEFER)
-+#define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN
-+#define DEFAULT_CORE_CNTRL CORE_MDC_EN
-+
-+
-+/* NPE message codes */
-+#define NPE_GETSTATUS 0x00
-+#define NPE_EDB_SETPORTADDRESS 0x01
-+#define NPE_EDB_GETMACADDRESSDATABASE 0x02
-+#define NPE_EDB_SETMACADDRESSSDATABASE 0x03
-+#define NPE_GETSTATS 0x04
-+#define NPE_RESETSTATS 0x05
-+#define NPE_SETMAXFRAMELENGTHS 0x06
-+#define NPE_VLAN_SETRXTAGMODE 0x07
-+#define NPE_VLAN_SETDEFAULTRXVID 0x08
-+#define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09
-+#define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A
-+#define NPE_VLAN_SETRXQOSENTRY 0x0B
-+#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C
-+#define NPE_STP_SETBLOCKINGSTATE 0x0D
-+#define NPE_FW_SETFIREWALLMODE 0x0E
-+#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F
-+#define NPE_PC_SETAPMACTABLE 0x11
-+#define NPE_SETLOOPBACK_MODE 0x12
-+#define NPE_PC_SETBSSIDTABLE 0x13
-+#define NPE_ADDRESS_FILTER_CONFIG 0x14
-+#define NPE_APPENDFCSCONFIG 0x15
-+#define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16
-+#define NPE_MAC_RECOVERY_START 0x17
-+
-+
-+#ifdef __ARMEB__
-+typedef struct sk_buff buffer_t;
-+#define free_buffer dev_kfree_skb
-+#define free_buffer_irq dev_kfree_skb_irq
-+#else
-+typedef void buffer_t;
-+#define free_buffer kfree
-+#define free_buffer_irq kfree
-+#endif
-+
-+struct eth_regs {
-+ u32 tx_control[2], __res1[2]; /* 000 */
-+ u32 rx_control[2], __res2[2]; /* 010 */
-+ u32 random_seed, __res3[3]; /* 020 */
-+ u32 partial_empty_threshold, __res4; /* 030 */
-+ u32 partial_full_threshold, __res5; /* 038 */
-+ u32 tx_start_bytes, __res6[3]; /* 040 */
-+ u32 tx_deferral, rx_deferral,__res7[2]; /* 050 */
-+ u32 tx_2part_deferral[2], __res8[2]; /* 060 */
-+ u32 slot_time, __res9[3]; /* 070 */
-+ u32 mdio_command[4]; /* 080 */
-+ u32 mdio_status[4]; /* 090 */
-+ u32 mcast_mask[6], __res10[2]; /* 0A0 */
-+ u32 mcast_addr[6], __res11[2]; /* 0C0 */
-+ u32 int_clock_threshold, __res12[3]; /* 0E0 */
-+ u32 hw_addr[6], __res13[61]; /* 0F0 */
-+ u32 core_control; /* 1FC */
-+};
-+
-+struct port {
-+ struct resource *mem_res;
-+ struct eth_regs __iomem *regs;
-+ struct npe *npe;
-+ struct net_device *netdev;
-+ struct net_device_stats stat;
-+ struct mii_if_info mii;
-+ struct delayed_work mdio_thread;
-+ struct eth_plat_info *plat;
-+ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
-+ struct desc *desc_tab; /* coherent */
-+ u32 desc_tab_phys;
-+ int id; /* logical port ID */
-+ u16 mii_bmcr;
-+};
-+
-+/* NPE message structure */
-+struct msg {
-+#ifdef __ARMEB__
-+ u8 cmd, eth_id, byte2, byte3;
-+ u8 byte4, byte5, byte6, byte7;
-+#else
-+ u8 byte3, byte2, eth_id, cmd;
-+ u8 byte7, byte6, byte5, byte4;
-+#endif
-+};
-+
-+/* Ethernet packet descriptor */
-+struct desc {
-+ u32 next; /* pointer to next buffer, unused */
-+
-+#ifdef __ARMEB__
-+ u16 buf_len; /* buffer length */
-+ u16 pkt_len; /* packet length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u8 dest_id;
-+ u8 src_id;
-+ u16 flags;
-+ u8 qos;
-+ u8 padlen;
-+ u16 vlan_tci;
-+#else
-+ u16 pkt_len; /* packet length */
-+ u16 buf_len; /* buffer length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u16 flags;
-+ u8 src_id;
-+ u8 dest_id;
-+ u16 vlan_tci;
-+ u8 padlen;
-+ u8 qos;
-+#endif
-+
-+#ifdef __ARMEB__
-+ u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3;
-+ u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1;
-+ u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5;
-+#else
-+ u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0;
-+ u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4;
-+ u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2;
-+#endif
-+};
-+
-+
-+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
-+
-+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
-+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
-+{
-+ int i;
-+ for (i = 0; i < cnt; i++)
-+ dest[i] = swab32(src[i]);
-+}
-+#endif
-+
-+static spinlock_t mdio_lock;
-+static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
-+static int ports_open;
-+static struct port *npe_port_tab[MAX_NPES];
-+static struct dma_pool *dma_pool;
-+
-+
-+static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
-+ int write, u16 cmd)
-+{
-+ int cycles = 0;
-+
-+ if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
-+ printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
-+ return 0;
-+ }
-+
-+ if (write) {
-+ __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]);
-+ __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]);
-+ }
-+ __raw_writel(((phy_id << 5) | location) & 0xFF,
-+ &mdio_regs->mdio_command[2]);
-+ __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */,
-+ &mdio_regs->mdio_command[3]);
-+
-+ while ((cycles < MAX_MDIO_RETRIES) &&
-+ (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) {
-+ udelay(1);
-+ cycles++;
-+ }
-+
-+ if (cycles == MAX_MDIO_RETRIES) {
-+ printk(KERN_ERR "%s: MII write failed\n", dev->name);
-+ return 0;
-+ }
-+
-+#if DEBUG_MDIO
-+ printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
-+ cycles);
-+#endif
-+
-+ if (write)
-+ return 0;
-+
-+ if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
-+ printk(KERN_ERR "%s: MII read failed\n", dev->name);
-+ return 0;
-+ }
-+
-+ return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
-+ (__raw_readl(&mdio_regs->mdio_status[1]) << 8);
-+}
-+
-+static int mdio_read(struct net_device *dev, int phy_id, int location)
-+{
-+ unsigned long flags;
-+ u16 val;
-+
-+ spin_lock_irqsave(&mdio_lock, flags);
-+ val = mdio_cmd(dev, phy_id, location, 0, 0);
-+ spin_unlock_irqrestore(&mdio_lock, flags);
-+ return val;
-+}
-+
-+static void mdio_write(struct net_device *dev, int phy_id, int location,
-+ int val)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&mdio_lock, flags);
-+ mdio_cmd(dev, phy_id, location, 1, val);
-+ spin_unlock_irqrestore(&mdio_lock, flags);
-+}
-+
-+static void phy_reset(struct net_device *dev, int phy_id)
-+{
-+ struct port *port = netdev_priv(dev);
-+ int cycles = 0;
-+
-+ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
-+
-+ while (cycles < MAX_MII_RESET_RETRIES) {
-+ if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-+#if DEBUG_MDIO
-+ printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
-+ dev->name, cycles);
-+#endif
-+ return;
-+ }
-+ udelay(1);
-+ cycles++;
-+ }
-+
-+ printk(KERN_ERR "%s: MII reset failed\n", dev->name);
-+}
-+
-+static void eth_set_duplex(struct port *port)
-+{
-+ if (port->mii.full_duplex)
-+ __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
-+ &port->regs->tx_control[0]);
-+ else
-+ __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
-+ &port->regs->tx_control[0]);
-+}
-+
-+
-+static void phy_check_media(struct port *port, int init)
-+{
-+ if (mii_check_media(&port->mii, 1, init))
-+ eth_set_duplex(port);
-+ if (port->mii.force_media) { /* mii_check_media() doesn't work */
-+ struct net_device *dev = port->netdev;
-+ int cur_link = mii_link_ok(&port->mii);
-+ int prev_link = netif_carrier_ok(dev);
-+
-+ if (!prev_link && cur_link) {
-+ printk(KERN_INFO "%s: link up\n", dev->name);
-+ netif_carrier_on(dev);
-+ } else if (prev_link && !cur_link) {
-+ printk(KERN_INFO "%s: link down\n", dev->name);
-+ netif_carrier_off(dev);
-+ }
-+ }
-+}
-+
-+
-+static void mdio_thread(struct work_struct *work)
-+{
-+ struct port *port = container_of(work, struct port, mdio_thread.work);
-+
-+ phy_check_media(port, 0);
-+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
-+}
-+
-+
-+static inline void debug_pkt(struct net_device *dev, const char *func,
-+ u8 *data, int len)
-+{
-+#if DEBUG_PKT_BYTES
-+ int i;
-+
-+ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
-+ for (i = 0; i < len; i++) {
-+ if (i >= DEBUG_PKT_BYTES)
-+ break;
-+ printk("%s%02X",
-+ ((i == 6) || (i == 12) || (i >= 14)) ? " " : "",
-+ data[i]);
-+ }
-+ printk("\n");
-+#endif
-+}
-+
-+
-+static inline void debug_desc(u32 phys, struct desc *desc)
-+{
-+#if DEBUG_DESC
-+ printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X"
-+ " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n",
-+ phys, desc->next, desc->buf_len, desc->pkt_len,
-+ desc->data, desc->dest_id, desc->src_id, desc->flags,
-+ desc->qos, desc->padlen, desc->vlan_tci,
-+ desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2,
-+ desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5,
-+ desc->src_mac_0, desc->src_mac_1, desc->src_mac_2,
-+ desc->src_mac_3, desc->src_mac_4, desc->src_mac_5);
-+#endif
-+}
-+
-+static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
-+{
-+#if DEBUG_QUEUES
-+ static struct {
-+ int queue;
-+ char *name;
-+ } names[] = {
-+ { TX_QUEUE(0x10), "TX#0 " },
-+ { TX_QUEUE(0x20), "TX#1 " },
-+ { TX_QUEUE(0x00), "TX#2 " },
-+ { RXFREE_QUEUE(0x10), "RX-free#0 " },
-+ { RXFREE_QUEUE(0x20), "RX-free#1 " },
-+ { RXFREE_QUEUE(0x00), "RX-free#2 " },
-+ { TXDONE_QUEUE, "TX-done " },
-+ };
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(names); i++)
-+ if (names[i].queue == queue)
-+ break;
-+
-+ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
-+ i < ARRAY_SIZE(names) ? names[i].name : "",
-+ is_get ? "->" : "<-", phys);
-+#endif
-+}
-+
-+static inline u32 queue_get_entry(unsigned int queue)
-+{
-+ u32 phys = qmgr_get_entry(queue);
-+ debug_queue(queue, 1, phys);
-+ return phys;
-+}
-+
-+static inline int queue_get_desc(unsigned int queue, struct port *port,
-+ int is_tx)
-+{
-+ u32 phys, tab_phys, n_desc;
-+ struct desc *tab;
-+
-+ if (!(phys = queue_get_entry(queue)))
-+ return -1;
-+
-+ phys &= ~0x1F; /* mask out non-address bits */
-+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
-+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
-+ n_desc = (phys - tab_phys) / sizeof(struct desc);
-+ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
-+ debug_desc(phys, &tab[n_desc]);
-+ BUG_ON(tab[n_desc].next);
-+ return n_desc;
-+}
-+
-+static inline void queue_put_desc(unsigned int queue, u32 phys,
-+ struct desc *desc)
-+{
-+ debug_queue(queue, 0, phys);
-+ debug_desc(phys, desc);
-+ BUG_ON(phys & 0x1F);
-+ qmgr_put_entry(queue, phys);
-+ BUG_ON(qmgr_stat_overflow(queue));
-+}
-+
-+
-+static inline void dma_unmap_tx(struct port *port, struct desc *desc)
-+{
-+#ifdef __ARMEB__
-+ dma_unmap_single(&port->netdev->dev, desc->data,
-+ desc->buf_len, DMA_TO_DEVICE);
-+#else
-+ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
-+ ALIGN((desc->data & 3) + desc->buf_len, 4),
-+ DMA_TO_DEVICE);
-+#endif
-+}
-+
-+
-+static void eth_rx_irq(void *pdev)
-+{
-+ struct net_device *dev = pdev;
-+ struct port *port = netdev_priv(dev);
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
-+#endif
-+ qmgr_disable_irq(port->plat->rxq);
-+ netif_rx_schedule(dev);
-+}
-+
-+static int eth_poll(struct net_device *dev, int *budget)
-+{
-+ struct port *port = netdev_priv(dev);
-+ unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id);
-+ int quota = dev->quota, received = 0;
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
-+#endif
-+
-+ while (quota) {
-+ struct sk_buff *skb;
-+ struct desc *desc;
-+ int n;
-+#ifdef __ARMEB__
-+ struct sk_buff *temp;
-+ u32 phys;
-+#endif
-+
-+ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
-+ dev->quota -= received; /* No packet received */
-+ *budget -= received;
-+ received = 0;
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
-+ dev->name);
-+#endif
-+ netif_rx_complete(dev);
-+ qmgr_enable_irq(rxq);
-+ if (!qmgr_stat_empty(rxq) &&
-+ netif_rx_reschedule(dev, 0)) {
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll"
-+ " netif_rx_reschedule successed\n",
-+ dev->name);
-+#endif
-+ qmgr_disable_irq(rxq);
-+ continue;
-+ }
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll all done\n",
-+ dev->name);
-+#endif
-+ return 0; /* all work done */
-+ }
-+
-+ desc = rx_desc_ptr(port, n);
-+
-+#ifdef __ARMEB__
-+ if ((skb = netdev_alloc_skb(dev, MAX_MRU)) != NULL) {
-+ phys = dma_map_single(&dev->dev, skb->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+ dev_kfree_skb(skb);
-+ skb = NULL;
-+ }
-+ }
-+#else
-+ skb = netdev_alloc_skb(dev, desc->pkt_len);
-+#endif
-+
-+ if (!skb) {
-+ port->stat.rx_dropped++;
-+ /* put the desc back on RX-ready queue */
-+ desc->buf_len = MAX_MRU;
-+ desc->pkt_len = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ continue;
-+ }
-+
-+ /* process received frame */
-+#ifdef __ARMEB__
-+ temp = skb;
-+ skb = port->rx_buff_tab[n];
-+ dma_unmap_single(&dev->dev, desc->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+#else
-+ dma_sync_single(&dev->dev, desc->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
-+ ALIGN(desc->pkt_len, 4) / 4);
-+#endif
-+ skb_put(skb, desc->pkt_len);
-+
-+ debug_pkt(dev, "eth_poll", skb->data, skb->len);
-+
-+ skb->protocol = eth_type_trans(skb, dev);
-+ dev->last_rx = jiffies;
-+ port->stat.rx_packets++;
-+ port->stat.rx_bytes += skb->len;
-+ netif_receive_skb(skb);
-+
-+ /* put the new buffer on RX-free queue */
-+#ifdef __ARMEB__
-+ port->rx_buff_tab[n] = temp;
-+ desc->data = phys;
-+#endif
-+ desc->buf_len = MAX_MRU;
-+ desc->pkt_len = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ quota--;
-+ received++;
-+ }
-+ dev->quota -= received;
-+ *budget -= received;
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
-+#endif
-+ return 1; /* not all work done */
-+}
-+
-+
-+static void eth_txdone_irq(void *unused)
-+{
-+ u32 phys;
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
-+#endif
-+ while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) {
-+ u32 npe_id, n_desc;
-+ struct port *port;
-+ struct desc *desc;
-+ int start;
-+
-+ npe_id = phys & 3;
-+ BUG_ON(npe_id >= MAX_NPES);
-+ port = npe_port_tab[npe_id];
-+ BUG_ON(!port);
-+ phys &= ~0x1F; /* mask out non-address bits */
-+ n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc);
-+ BUG_ON(n_desc >= TX_DESCS);
-+ desc = tx_desc_ptr(port, n_desc);
-+ debug_desc(phys, desc);
-+
-+ if (port->tx_buff_tab[n_desc]) { /* not the draining packet */
-+ port->stat.tx_packets++;
-+ port->stat.tx_bytes += desc->pkt_len;
-+
-+ dma_unmap_tx(port, desc);
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n",
-+ port->netdev->name, port->tx_buff_tab[n_desc]);
-+#endif
-+ free_buffer_irq(port->tx_buff_tab[n_desc]);
-+ port->tx_buff_tab[n_desc] = NULL;
-+ }
-+
-+ start = qmgr_stat_empty(port->plat->txreadyq);
-+ queue_put_desc(port->plat->txreadyq, phys, desc);
-+ if (start) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
-+ port->netdev->name);
-+#endif
-+ netif_wake_queue(port->netdev);
-+ }
-+ }
-+}
-+
-+static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ unsigned int txreadyq = port->plat->txreadyq;
-+ int len, offset, bytes, n;
-+ void *mem;
-+ u32 phys;
-+ struct desc *desc;
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
-+#endif
-+
-+ if (unlikely(skb->len > MAX_MRU)) {
-+ dev_kfree_skb(skb);
-+ port->stat.tx_errors++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ debug_pkt(dev, "eth_xmit", skb->data, skb->len);
-+
-+ len = skb->len;
-+#ifdef __ARMEB__
-+ offset = 0; /* no need to keep alignment */
-+ bytes = len;
-+ mem = skb->data;
-+#else
-+ offset = (int)skb->data & 3; /* keep 32-bit alignment */
-+ bytes = ALIGN(offset + len, 4);
-+ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
-+ dev_kfree_skb(skb);
-+ port->stat.tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
-+ dev_kfree_skb(skb);
-+#endif
-+
-+ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+#ifdef __ARMEB__
-+ dev_kfree_skb(skb);
-+#else
-+ kfree(mem);
-+#endif
-+ port->stat.tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ n = queue_get_desc(txreadyq, port, 1);
-+ BUG_ON(n < 0);
-+ desc = tx_desc_ptr(port, n);
-+
-+#ifdef __ARMEB__
-+ port->tx_buff_tab[n] = skb;
-+#else
-+ port->tx_buff_tab[n] = mem;
-+#endif
-+ desc->data = phys + offset;
-+ desc->buf_len = desc->pkt_len = len;
-+
-+ /* NPE firmware pads short frames with zeros internally */
-+ wmb();
-+ queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
-+ dev->trans_start = jiffies;
-+
-+ if (qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
-+#endif
-+ netif_stop_queue(dev);
-+ /* we could miss TX ready interrupt */
-+ if (!qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit ready again\n",
-+ dev->name);
-+#endif
-+ netif_wake_queue(dev);
-+ }
-+ }
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
-+#endif
-+ return NETDEV_TX_OK;
-+}
-+
-+
-+static struct net_device_stats *eth_stats(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ return &port->stat;
-+}
-+
-+static void eth_set_mcast_list(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct dev_mc_list *mclist = dev->mc_list;
-+ u8 diffs[ETH_ALEN], *addr;
-+ int cnt = dev->mc_count, i;
-+
-+ if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
-+ __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
-+ &port->regs->rx_control[0]);
-+ return;
-+ }
-+
-+ memset(diffs, 0, ETH_ALEN);
-+ addr = mclist->dmi_addr; /* first MAC address */
-+
-+ while (--cnt && (mclist = mclist->next))
-+ for (i = 0; i < ETH_ALEN; i++)
-+ diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
-+
-+ for (i = 0; i < ETH_ALEN; i++) {
-+ __raw_writel(addr[i], &port->regs->mcast_addr[i]);
-+ __raw_writel(~diffs[i], &port->regs->mcast_mask[i]);
-+ }
-+
-+ __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN,
-+ &port->regs->rx_control[0]);
-+}
-+
-+
-+static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
-+{
-+ struct port *port = netdev_priv(dev);
-+ unsigned int duplex_chg;
-+ int err;
-+
-+ if (!netif_running(dev))
-+ return -EINVAL;
-+ err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
-+ if (duplex_chg)
-+ eth_set_duplex(port);
-+ return err;
-+}
-+
-+
-+static int request_queues(struct port *port)
-+{
-+ int err;
-+
-+ err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0);
-+ if (err)
-+ return err;
-+
-+ err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rxfree;
-+
-+ err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rx;
-+
-+ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_tx;
-+
-+ /* TX-done queue handles skbs sent out by the NPEs */
-+ if (!ports_open) {
-+ err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0);
-+ if (err)
-+ goto rel_txready;
-+ }
-+ return 0;
-+
-+rel_txready:
-+ qmgr_release_queue(port->plat->txreadyq);
-+rel_tx:
-+ qmgr_release_queue(TX_QUEUE(port->id));
-+rel_rx:
-+ qmgr_release_queue(port->plat->rxq);
-+rel_rxfree:
-+ qmgr_release_queue(RXFREE_QUEUE(port->id));
-+ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
-+ port->netdev->name);
-+ return err;
-+}
-+
-+static void release_queues(struct port *port)
-+{
-+ qmgr_release_queue(RXFREE_QUEUE(port->id));
-+ qmgr_release_queue(port->plat->rxq);
-+ qmgr_release_queue(TX_QUEUE(port->id));
-+ qmgr_release_queue(port->plat->txreadyq);
-+
-+ if (!ports_open)
-+ qmgr_release_queue(TXDONE_QUEUE);
-+}
-+
-+static int init_queues(struct port *port)
-+{
-+ int i;
-+
-+ if (!ports_open)
-+ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
-+ POOL_ALLOC_SIZE, 32, 0)))
-+ return -ENOMEM;
-+
-+ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
-+ &port->desc_tab_phys)))
-+ return -ENOMEM;
-+ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
-+ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
-+ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
-+
-+ /* Setup RX buffers */
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff;
-+ void *data;
-+#ifdef __ARMEB__
-+ if (!(buff = netdev_alloc_skb(port->netdev, MAX_MRU)))
-+ return -ENOMEM;
-+ data = buff->data;
-+#else
-+ if (!(buff = kmalloc(MAX_MRU, GFP_KERNEL)))
-+ return -ENOMEM;
-+ data = buff;
-+#endif
-+ desc->buf_len = MAX_MRU;
-+ desc->data = dma_map_single(&port->netdev->dev, data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(desc->data)) {
-+ free_buffer(buff);
-+ return -EIO;
-+ }
-+ port->rx_buff_tab[i] = buff;
-+ }
-+
-+ return 0;
-+}
-+
-+static void destroy_queues(struct port *port)
-+{
-+ int i;
-+
-+ if (port->desc_tab) {
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff = port->rx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_single(&port->netdev->dev,
-+ desc->data, MAX_MRU,
-+ DMA_FROM_DEVICE);
-+ free_buffer(buff);
-+ }
-+ }
-+ for (i = 0; i < TX_DESCS; i++) {
-+ struct desc *desc = tx_desc_ptr(port, i);
-+ buffer_t *buff = port->tx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_tx(port, desc);
-+ free_buffer(buff);
-+ }
-+ }
-+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
-+ port->desc_tab = NULL;
-+ }
-+
-+ if (!ports_open && dma_pool) {
-+ dma_pool_destroy(dma_pool);
-+ dma_pool = NULL;
-+ }
-+}
-+
-+static int eth_open(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int i, err;
-+
-+ if (!npe_running(npe)) {
-+ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
-+ if (err)
-+ return err;
-+
-+ if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
-+ printk(KERN_ERR "%s: %s not responding\n", dev->name,
-+ npe_name(npe));
-+ return -EIO;
-+ }
-+ }
-+
-+ mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_VLAN_SETRXQOSENTRY;
-+ msg.eth_id = port->id;
-+ msg.byte5 = port->plat->rxq | 0x80;
-+ msg.byte7 = port->plat->rxq << 4;
-+ for (i = 0; i < 8; i++) {
-+ msg.byte3 = i;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ"))
-+ return -EIO;
-+ }
-+
-+ msg.cmd = NPE_EDB_SETPORTADDRESS;
-+ msg.eth_id = PHYSICAL_ID(port->id);
-+ msg.byte2 = dev->dev_addr[0];
-+ msg.byte3 = dev->dev_addr[1];
-+ msg.byte4 = dev->dev_addr[2];
-+ msg.byte5 = dev->dev_addr[3];
-+ msg.byte6 = dev->dev_addr[4];
-+ msg.byte7 = dev->dev_addr[5];
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC"))
-+ return -EIO;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_FW_SETFIREWALLMODE;
-+ msg.eth_id = port->id;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
-+ return -EIO;
-+
-+ if ((err = request_queues(port)) != 0)
-+ return err;
-+
-+ if ((err = init_queues(port)) != 0) {
-+ destroy_queues(port);
-+ release_queues(port);
-+ return err;
-+ }
-+
-+ for (i = 0; i < ETH_ALEN; i++)
-+ __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
-+ __raw_writel(0x08, &port->regs->random_seed);
-+ __raw_writel(0x12, &port->regs->partial_empty_threshold);
-+ __raw_writel(0x30, &port->regs->partial_full_threshold);
-+ __raw_writel(0x08, &port->regs->tx_start_bytes);
-+ __raw_writel(0x15, &port->regs->tx_deferral);
-+ __raw_writel(0x08, &port->regs->tx_2part_deferral[0]);
-+ __raw_writel(0x07, &port->regs->tx_2part_deferral[1]);
-+ __raw_writel(0x80, &port->regs->slot_time);
-+ __raw_writel(0x01, &port->regs->int_clock_threshold);
-+
-+ /* Populate queues with buffers, no failure after this point */
-+ for (i = 0; i < TX_DESCS; i++)
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
-+
-+ for (i = 0; i < RX_DESCS; i++)
-+ queue_put_desc(RXFREE_QUEUE(port->id),
-+ rx_desc_phys(port, i), rx_desc_ptr(port, i));
-+
-+ __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]);
-+ __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]);
-+ __raw_writel(0, &port->regs->rx_control[1]);
-+ __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
-+
-+ phy_check_media(port, 1);
-+ eth_set_mcast_list(dev);
-+ netif_start_queue(dev);
-+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
-+
-+ qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ eth_rx_irq, dev);
-+ if (!ports_open) {
-+ qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ eth_txdone_irq, NULL);
-+ qmgr_enable_irq(TXDONE_QUEUE);
-+ }
-+ ports_open++;
-+ netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
-+ return 0;
-+}
-+
-+static int eth_close(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct msg msg;
-+ int buffs = RX_DESCS; /* allocated RX buffers */
-+ int i;
-+
-+ ports_open--;
-+ qmgr_disable_irq(port->plat->rxq);
-+ netif_stop_queue(dev);
-+
-+ while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0)
-+ buffs--;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_SETLOOPBACK_MODE;
-+ msg.eth_id = port->id;
-+ msg.byte3 = 1;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
-+ printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
-+
-+ i = 0;
-+ do { /* drain RX buffers */
-+ while (queue_get_desc(port->plat->rxq, port, 0) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ if (qmgr_stat_empty(TX_QUEUE(port->id))) {
-+ /* we have to inject some packet */
-+ struct desc *desc;
-+ u32 phys;
-+ int n = queue_get_desc(port->plat->txreadyq, port, 1);
-+ BUG_ON(n < 0);
-+ desc = tx_desc_ptr(port, n);
-+ phys = tx_desc_phys(port, n);
-+ desc->buf_len = desc->pkt_len = 1;
-+ wmb();
-+ queue_put_desc(TX_QUEUE(port->id), phys, desc);
-+ }
-+ udelay(1);
-+ } while (++i < MAX_CLOSE_WAIT);
-+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
-+ " left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
-+#endif
-+
-+ buffs = TX_DESCS;
-+ while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0)
-+ buffs--; /* cancel TX */
-+
-+ i = 0;
-+ do {
-+ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ } while (++i < MAX_CLOSE_WAIT);
-+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
-+ "left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
-+#endif
-+
-+ msg.byte3 = 0;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
-+ printk(KERN_CRIT "%s: unable to disable loopback\n",
-+ dev->name);
-+
-+ port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
-+ ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
-+ mdio_write(dev, port->plat->phy, MII_BMCR,
-+ port->mii_bmcr | BMCR_PDOWN);
-+
-+ if (!ports_open)
-+ qmgr_disable_irq(TXDONE_QUEUE);
-+ cancel_rearming_delayed_work(&port->mdio_thread);
-+ destroy_queues(port);
-+ release_queues(port);
-+ return 0;
-+}
-+
-+static int __devinit eth_init_one(struct platform_device *pdev)
-+{
-+ struct port *port;
-+ struct net_device *dev;
-+ struct eth_plat_info *plat = pdev->dev.platform_data;
-+ u32 regs_phys;
-+ int err;
-+
-+ if (!(dev = alloc_etherdev(sizeof(struct port))))
-+ return -ENOMEM;
-+
-+ SET_MODULE_OWNER(dev);
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+ port = netdev_priv(dev);
-+ port->netdev = dev;
-+ port->id = pdev->id;
-+
-+ switch (port->id) {
-+ case IXP4XX_ETH_NPEA:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
-+ regs_phys = IXP4XX_EthA_BASE_PHYS;
-+ break;
-+ case IXP4XX_ETH_NPEB:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-+ regs_phys = IXP4XX_EthB_BASE_PHYS;
-+ break;
-+ case IXP4XX_ETH_NPEC:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
-+ regs_phys = IXP4XX_EthC_BASE_PHYS;
-+ break;
-+ default:
-+ err = -ENOSYS;
-+ goto err_free;
-+ }
-+
-+ dev->open = eth_open;
-+ dev->hard_start_xmit = eth_xmit;
-+ dev->poll = eth_poll;
-+ dev->stop = eth_close;
-+ dev->get_stats = eth_stats;
-+ dev->do_ioctl = eth_ioctl;
-+ dev->set_multicast_list = eth_set_mcast_list;
-+ dev->weight = 16;
-+ dev->tx_queue_len = 100;
-+
-+ if (!(port->npe = npe_request(NPE_ID(port->id)))) {
-+ err = -EIO;
-+ goto err_free;
-+ }
-+
-+ if (register_netdev(dev)) {
-+ err = -EIO;
-+ goto err_npe_rel;
-+ }
-+
-+ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
-+ if (!port->mem_res) {
-+ err = -EBUSY;
-+ goto err_unreg;
-+ }
-+
-+ port->plat = plat;
-+ npe_port_tab[NPE_ID(port->id)] = port;
-+ memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
-+ &port->regs->core_control);
-+ udelay(50);
-+ __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
-+ udelay(50);
-+
-+ port->mii.dev = dev;
-+ port->mii.mdio_read = mdio_read;
-+ port->mii.mdio_write = mdio_write;
-+ port->mii.phy_id = plat->phy;
-+ port->mii.phy_id_mask = 0x1F;
-+ port->mii.reg_num_mask = 0x1F;
-+
-+ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
-+ npe_name(port->npe));
-+
-+ phy_reset(dev, plat->phy);
-+ port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
-+ ~(BMCR_RESET | BMCR_PDOWN);
-+ mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
-+
-+ INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
-+ return 0;
-+
-+err_unreg:
-+ unregister_netdev(dev);
-+err_npe_rel:
-+ npe_release(port->npe);
-+err_free:
-+ free_netdev(dev);
-+ return err;
-+}
-+
-+static int __devexit eth_remove_one(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct port *port = netdev_priv(dev);
-+
-+ unregister_netdev(dev);
-+ npe_port_tab[NPE_ID(port->id)] = NULL;
-+ platform_set_drvdata(pdev, NULL);
-+ npe_release(port->npe);
-+ release_resource(port->mem_res);
-+ free_netdev(dev);
-+ return 0;
-+}
-+
-+static struct platform_driver drv = {
-+ .driver.name = DRV_NAME,
-+ .probe = eth_init_one,
-+ .remove = eth_remove_one,
-+};
-+
-+static int __init eth_init_module(void)
-+{
-+ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
-+ return -ENOSYS;
-+
-+ /* All MII PHY accesses use NPE-B Ethernet registers */
-+ spin_lock_init(&mdio_lock);
-+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-+ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
-+
-+ return platform_driver_register(&drv);
-+}
-+
-+static void __exit eth_cleanup_module(void)
-+{
-+ platform_driver_unregister(&drv);
-+}
-+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
-+MODULE_LICENSE("GPL v2");
-+module_init(eth_init_module);
-+module_exit(eth_cleanup_module);
-Index: linux-2.6.23.17/drivers/net/wan/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/wan/Kconfig
-+++ linux-2.6.23.17/drivers/net/wan/Kconfig
-@@ -334,6 +334,15 @@ config DSCC4_PCI_RST
-
- Say Y if your card supports this feature.
-
-+config IXP4XX_HSS
-+ tristate "IXP4xx HSS (synchronous serial port) support"
-+ depends on HDLC && ARM && ARCH_IXP4XX
-+ select IXP4XX_NPE
-+ select IXP4XX_QMGR
-+ help
-+ Say Y here if you want to use built-in HSS ports
-+ on IXP4xx processor.
-+
- config DLCI
- tristate "Frame Relay DLCI support"
- ---help---
-Index: linux-2.6.23.17/drivers/net/wan/Makefile
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/wan/Makefile
-+++ linux-2.6.23.17/drivers/net/wan/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_C101) += c101.o
- obj-$(CONFIG_WANXL) += wanxl.o
- obj-$(CONFIG_PCI200SYN) += pci200syn.o
- obj-$(CONFIG_PC300TOO) += pc300too.o
-+obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o
-
- clean-files := wanxlfw.inc
- $(obj)/wanxl.o: $(obj)/wanxlfw.inc
-Index: linux-2.6.23.17/drivers/net/wan/ixp4xx_hss.c
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/drivers/net/wan/ixp4xx_hss.c
-@@ -0,0 +1,1270 @@
-+/*
-+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/hdlc.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/npe.h>
-+#include <asm/arch/qmgr.h>
-+
-+#define DEBUG_QUEUES 0
-+#define DEBUG_DESC 0
-+#define DEBUG_RX 0
-+#define DEBUG_TX 0
-+#define DEBUG_PKT_BYTES 0
-+#define DEBUG_CLOSE 0
-+
-+#define DRV_NAME "ixp4xx_hss"
-+
-+#define PKT_EXTRA_FLAGS 0 /* orig 1 */
-+#define FRAME_SYNC_OFFSET 0 /* unused, channelized only */
-+#define FRAME_SYNC_SIZE 1024
-+#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
-+#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
-+
-+#define RX_DESCS 16 /* also length of all RX queues */
-+#define TX_DESCS 16 /* also length of all TX queues */
-+
-+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
-+#define MAX_CLOSE_WAIT 1000 /* microseconds */
-+
-+/* Queue IDs */
-+#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
-+#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
-+#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
-+#define HSS0_PKT_TX1_QUEUE 15
-+#define HSS0_PKT_TX2_QUEUE 16
-+#define HSS0_PKT_TX3_QUEUE 17
-+#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
-+#define HSS0_PKT_RXFREE1_QUEUE 19
-+#define HSS0_PKT_RXFREE2_QUEUE 20
-+#define HSS0_PKT_RXFREE3_QUEUE 21
-+#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
-+
-+#define HSS1_CHL_RXTRIG_QUEUE 10
-+#define HSS1_PKT_RX_QUEUE 0
-+#define HSS1_PKT_TX0_QUEUE 5
-+#define HSS1_PKT_TX1_QUEUE 6
-+#define HSS1_PKT_TX2_QUEUE 7
-+#define HSS1_PKT_TX3_QUEUE 8
-+#define HSS1_PKT_RXFREE0_QUEUE 1
-+#define HSS1_PKT_RXFREE1_QUEUE 2
-+#define HSS1_PKT_RXFREE2_QUEUE 3
-+#define HSS1_PKT_RXFREE3_QUEUE 4
-+#define HSS1_PKT_TXDONE_QUEUE 9
-+
-+#define NPE_PKT_MODE_HDLC 0
-+#define NPE_PKT_MODE_RAW 1
-+#define NPE_PKT_MODE_56KMODE 2
-+#define NPE_PKT_MODE_56KENDIAN_MSB 4
-+
-+/* PKT_PIPE_HDLC_CFG_WRITE flags */
-+#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
-+#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
-+#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
-+
-+
-+/* hss_config, PCRs */
-+/* Frame sync sampling, default = active low */
-+#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
-+#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
-+#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
-+
-+/* Frame sync pin: input (default) or output generated off a given clk edge */
-+#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
-+#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
-+
-+/* Frame and data clock sampling on edge, default = falling */
-+#define PCR_FCLK_EDGE_RISING 0x08000000
-+#define PCR_DCLK_EDGE_RISING 0x04000000
-+
-+/* Clock direction, default = input */
-+#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
-+
-+/* Generate/Receive frame pulses, default = enabled */
-+#define PCR_FRM_PULSE_DISABLED 0x01000000
-+
-+ /* Data rate is full (default) or half the configured clk speed */
-+#define PCR_HALF_CLK_RATE 0x00200000
-+
-+/* Invert data between NPE and HSS FIFOs? (default = no) */
-+#define PCR_DATA_POLARITY_INVERT 0x00100000
-+
-+/* TX/RX endianness, default = LSB */
-+#define PCR_MSB_ENDIAN 0x00080000
-+
-+/* Normal (default) / open drain mode (TX only) */
-+#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
-+
-+/* No framing bit transmitted and expected on RX? (default = framing bit) */
-+#define PCR_SOF_NO_FBIT 0x00020000
-+
-+/* Drive data pins? */
-+#define PCR_TX_DATA_ENABLE 0x00010000
-+
-+/* Voice 56k type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_V56K_HIGH 0x00002000
-+#define PCR_TX_V56K_HIGH_IMP 0x00004000
-+
-+/* Unassigned type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_UNASS_HIGH 0x00000800
-+#define PCR_TX_UNASS_HIGH_IMP 0x00001000
-+
-+/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
-+#define PCR_TX_FB_HIGH_IMP 0x00000400
-+
-+/* 56k data endiannes - which bit unused: high (default) or low */
-+#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
-+
-+/* 56k data transmission type: 32/8 bit data (default) or 56K data */
-+#define PCR_TX_56KS_56K_DATA 0x00000100
-+
-+/* hss_config, cCR */
-+/* Number of packetized clients, default = 1 */
-+#define CCR_NPE_HFIFO_2_HDLC 0x04000000
-+#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
-+
-+/* default = no loopback */
-+#define CCR_LOOPBACK 0x02000000
-+
-+/* HSS number, default = 0 (first) */
-+#define CCR_SECOND_HSS 0x01000000
-+
-+
-+/* hss_config, clkCR: main:10, num:10, denom:12 */
-+#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
-+
-+#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
-+#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
-+#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
-+#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
-+#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
-+#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
-+
-+#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
-+#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
-+#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
-+#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
-+#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
-+#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
-+
-+
-+/* hss_config, LUT entries */
-+#define TDMMAP_UNASSIGNED 0
-+#define TDMMAP_HDLC 1 /* HDLC - packetized */
-+#define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */
-+#define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */
-+
-+#define TIMESLOTS 128
-+#define LUT_BITS 2
-+
-+/* offsets into HSS config */
-+#define HSS_CONFIG_TX_PCR 0x00
-+#define HSS_CONFIG_RX_PCR 0x04
-+#define HSS_CONFIG_CORE_CR 0x08
-+#define HSS_CONFIG_CLOCK_CR 0x0C
-+#define HSS_CONFIG_TX_FCR 0x10
-+#define HSS_CONFIG_RX_FCR 0x14
-+#define HSS_CONFIG_TX_LUT 0x18
-+#define HSS_CONFIG_RX_LUT 0x38
-+
-+
-+/* NPE command codes */
-+/* writes the ConfigWord value to the location specified by offset */
-+#define PORT_CONFIG_WRITE 0x40
-+
-+/* triggers the NPE to load the contents of the configuration table */
-+#define PORT_CONFIG_LOAD 0x41
-+
-+/* triggers the NPE to return an HssErrorReadResponse message */
-+#define PORT_ERROR_READ 0x42
-+
-+/* reset NPE internal status and enable the HssChannelized operation */
-+#define CHAN_FLOW_ENABLE 0x43
-+#define CHAN_FLOW_DISABLE 0x44
-+#define CHAN_IDLE_PATTERN_WRITE 0x45
-+#define CHAN_NUM_CHANS_WRITE 0x46
-+#define CHAN_RX_BUF_ADDR_WRITE 0x47
-+#define CHAN_RX_BUF_CFG_WRITE 0x48
-+#define CHAN_TX_BLK_CFG_WRITE 0x49
-+#define CHAN_TX_BUF_ADDR_WRITE 0x4A
-+#define CHAN_TX_BUF_SIZE_WRITE 0x4B
-+#define CHAN_TSLOTSWITCH_ENABLE 0x4C
-+#define CHAN_TSLOTSWITCH_DISABLE 0x4D
-+
-+/* downloads the gainWord value for a timeslot switching channel associated
-+ with bypassNum */
-+#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
-+
-+/* triggers the NPE to reset internal status and enable the HssPacketized
-+ operation for the flow specified by pPipe */
-+#define PKT_PIPE_FLOW_ENABLE 0x50
-+#define PKT_PIPE_FLOW_DISABLE 0x51
-+#define PKT_NUM_PIPES_WRITE 0x52
-+#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
-+#define PKT_PIPE_HDLC_CFG_WRITE 0x54
-+#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
-+#define PKT_PIPE_RX_SIZE_WRITE 0x56
-+#define PKT_PIPE_MODE_WRITE 0x57
-+
-+/* HDLC packet status values - desc->status */
-+#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
-+#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
-+#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
-+#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
-+ this packet (if buf_len < pkt_len) */
-+#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
-+#define ERR_HDLC_ABORT 6 /* abort sequence received */
-+#define ERR_DISCONNECTING 7 /* disconnect is in progress */
-+
-+
-+#ifdef __ARMEB__
-+typedef struct sk_buff buffer_t;
-+#define free_buffer dev_kfree_skb
-+#define free_buffer_irq dev_kfree_skb_irq
-+#else
-+typedef void buffer_t;
-+#define free_buffer kfree
-+#define free_buffer_irq kfree
-+#endif
-+
-+struct port {
-+ struct npe *npe;
-+ struct net_device *netdev;
-+ struct hss_plat_info *plat;
-+ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
-+ struct desc *desc_tab; /* coherent */
-+ u32 desc_tab_phys;
-+ int id;
-+ unsigned int clock_type, clock_rate, loopback;
-+ u8 hdlc_cfg;
-+};
-+
-+/* NPE message structure */
-+struct msg {
-+#ifdef __ARMEB__
-+ u8 cmd, unused, hss_port, index;
-+ union {
-+ struct { u8 data8a, data8b, data8c, data8d; };
-+ struct { u16 data16a, data16b; };
-+ struct { u32 data32; };
-+ };
-+#else
-+ u8 index, hss_port, unused, cmd;
-+ union {
-+ struct { u8 data8d, data8c, data8b, data8a; };
-+ struct { u16 data16b, data16a; };
-+ struct { u32 data32; };
-+ };
-+#endif
-+};
-+
-+/* HDLC packet descriptor */
-+struct desc {
-+ u32 next; /* pointer to next buffer, unused */
-+
-+#ifdef __ARMEB__
-+ u16 buf_len; /* buffer length */
-+ u16 pkt_len; /* packet length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u8 status;
-+ u8 error_count;
-+ u16 __reserved;
-+#else
-+ u16 pkt_len; /* packet length */
-+ u16 buf_len; /* buffer length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u16 __reserved;
-+ u8 error_count;
-+ u8 status;
-+#endif
-+ u32 __reserved1[4];
-+};
-+
-+
-+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
-+
-+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
-+
-+/*****************************************************************************
-+ * global variables
-+ ****************************************************************************/
-+
-+static int ports_open;
-+static struct dma_pool *dma_pool;
-+
-+static const struct {
-+ int tx, txdone, rx, rxfree;
-+}queue_ids[2] = {{ HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE,
-+ HSS0_PKT_RX_QUEUE, HSS0_PKT_RXFREE0_QUEUE },
-+ { HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE,
-+ HSS1_PKT_RX_QUEUE, HSS1_PKT_RXFREE0_QUEUE },
-+};
-+
-+/*****************************************************************************
-+ * utility functions
-+ ****************************************************************************/
-+
-+static inline struct port* dev_to_port(struct net_device *dev)
-+{
-+ return dev_to_hdlc(dev)->priv;
-+}
-+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
-+{
-+ int i;
-+ for (i = 0; i < cnt; i++)
-+ dest[i] = swab32(src[i]);
-+}
-+#endif
-+
-+static inline void debug_pkt(struct net_device *dev, const char *func,
-+ u8 *data, int len)
-+{
-+#if DEBUG_PKT_BYTES
-+ int i;
-+
-+ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
-+ for (i = 0; i < len; i++) {
-+ if (i >= DEBUG_PKT_BYTES)
-+ break;
-+ printk("%s%02X", !(i % 4) ? " " : "", data[i]);
-+ }
-+ printk("\n");
-+#endif
-+}
-+
-+
-+static inline void debug_desc(u32 phys, struct desc *desc)
-+{
-+#if DEBUG_DESC
-+ printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
-+ phys, desc->next, desc->buf_len, desc->pkt_len,
-+ desc->data, desc->status, desc->error_count);
-+#endif
-+}
-+
-+static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
-+{
-+#if DEBUG_QUEUES
-+ static struct {
-+ int queue;
-+ char *name;
-+ } names[] = {
-+ { HSS0_PKT_TX0_QUEUE, "TX#0 " },
-+ { HSS0_PKT_TXDONE_QUEUE, "TX-done#0 " },
-+ { HSS0_PKT_RX_QUEUE, "RX#0 " },
-+ { HSS0_PKT_RXFREE0_QUEUE, "RX-free#0 " },
-+ { HSS1_PKT_TX0_QUEUE, "TX#1 " },
-+ { HSS1_PKT_TXDONE_QUEUE, "TX-done#1 " },
-+ { HSS1_PKT_RX_QUEUE, "RX#1 " },
-+ { HSS1_PKT_RXFREE0_QUEUE, "RX-free#1 " },
-+ };
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(names); i++)
-+ if (names[i].queue == queue)
-+ break;
-+
-+ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
-+ i < ARRAY_SIZE(names) ? names[i].name : "",
-+ is_get ? "->" : "<-", phys);
-+#endif
-+}
-+
-+static inline u32 queue_get_entry(unsigned int queue)
-+{
-+ u32 phys = qmgr_get_entry(queue);
-+ debug_queue(queue, 1, phys);
-+ return phys;
-+}
-+
-+static inline int queue_get_desc(unsigned int queue, struct port *port,
-+ int is_tx)
-+{
-+ u32 phys, tab_phys, n_desc;
-+ struct desc *tab;
-+
-+ if (!(phys = queue_get_entry(queue)))
-+ return -1;
-+
-+ BUG_ON(phys & 0x1F);
-+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
-+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
-+ n_desc = (phys - tab_phys) / sizeof(struct desc);
-+ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
-+ debug_desc(phys, &tab[n_desc]);
-+ BUG_ON(tab[n_desc].next);
-+ return n_desc;
-+}
-+
-+static inline void queue_put_desc(unsigned int queue, u32 phys,
-+ struct desc *desc)
-+{
-+ debug_queue(queue, 0, phys);
-+ debug_desc(phys, desc);
-+ BUG_ON(phys & 0x1F);
-+ qmgr_put_entry(queue, phys);
-+ BUG_ON(qmgr_stat_overflow(queue));
-+}
-+
-+
-+static inline void dma_unmap_tx(struct port *port, struct desc *desc)
-+{
-+#ifdef __ARMEB__
-+ dma_unmap_single(&port->netdev->dev, desc->data,
-+ desc->buf_len, DMA_TO_DEVICE);
-+#else
-+ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
-+ ALIGN((desc->data & 3) + desc->buf_len, 4),
-+ DMA_TO_DEVICE);
-+#endif
-+}
-+
-+
-+static void hss_hdlc_set_carrier(void *pdev, int carrier)
-+{
-+ struct net_device *dev = pdev;
-+ if (carrier)
-+ netif_carrier_on(dev);
-+ else
-+ netif_carrier_off(dev);
-+}
-+
-+static void hss_hdlc_rx_irq(void *pdev)
-+{
-+ struct net_device *dev = pdev;
-+ struct port *port = dev_to_port(dev);
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
-+#endif
-+ qmgr_disable_irq(queue_ids[port->id].rx);
-+ netif_rx_schedule(dev);
-+}
-+
-+static int hss_hdlc_poll(struct net_device *dev, int *budget)
-+{
-+ struct port *port = dev_to_port(dev);
-+ unsigned int rxq = queue_ids[port->id].rx;
-+ unsigned int rxfreeq = queue_ids[port->id].rxfree;
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ int quota = dev->quota, received = 0;
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
-+#endif
-+
-+ while (quota) {
-+ struct sk_buff *skb;
-+ struct desc *desc;
-+ int n;
-+#ifdef __ARMEB__
-+ struct sk_buff *temp;
-+ u32 phys;
-+#endif
-+
-+ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
-+ dev->quota -= received; /* No packet received */
-+ *budget -= received;
-+ received = 0;
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll"
-+ " netif_rx_complete\n", dev->name);
-+#endif
-+ netif_rx_complete(dev);
-+ qmgr_enable_irq(rxq);
-+ if (!qmgr_stat_empty(rxq) &&
-+ netif_rx_reschedule(dev, 0)) {
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll"
-+ " netif_rx_reschedule successed\n",
-+ dev->name);
-+#endif
-+ qmgr_disable_irq(rxq);
-+ continue;
-+ }
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
-+ dev->name);
-+#endif
-+ return 0; /* all work done */
-+ }
-+
-+ desc = rx_desc_ptr(port, n);
-+
-+ if (desc->error_count) /* FIXME - remove printk */
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
-+ " errors %u\n", dev->name, desc->status,
-+ desc->error_count);
-+
-+ skb = NULL;
-+ switch (desc->status) {
-+ case 0:
-+#ifdef __ARMEB__
-+ if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) {
-+ phys = dma_map_single(&dev->dev, skb->data,
-+ RX_SIZE,
-+ DMA_FROM_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+ dev_kfree_skb(skb);
-+ skb = NULL;
-+ }
-+ }
-+#else
-+ skb = netdev_alloc_skb(dev, desc->pkt_len);
-+#endif
-+ if (!skb)
-+ stats->rx_dropped++;
-+ break;
-+ case ERR_HDLC_ALIGN:
-+ case ERR_HDLC_ABORT:
-+ stats->rx_frame_errors++;
-+ stats->rx_errors++;
-+ break;
-+ case ERR_HDLC_FCS:
-+ stats->rx_crc_errors++;
-+ stats->rx_errors++;
-+ break;
-+ case ERR_HDLC_TOO_LONG:
-+ stats->rx_length_errors++;
-+ stats->rx_errors++;
-+ break;
-+ default: /* FIXME - remove printk */
-+ printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X"
-+ " errors %u\n", dev->name, desc->status,
-+ desc->error_count);
-+ stats->rx_errors++;
-+ }
-+
-+ if (!skb) {
-+ /* put the desc back on RX-ready queue */
-+ desc->buf_len = RX_SIZE;
-+ desc->pkt_len = desc->status = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ continue;
-+ }
-+
-+ /* process received frame */
-+#ifdef __ARMEB__
-+ temp = skb;
-+ skb = port->rx_buff_tab[n];
-+ dma_unmap_single(&dev->dev, desc->data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+#else
-+ dma_sync_single(&dev->dev, desc->data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
-+ ALIGN(desc->pkt_len, 4) / 4);
-+#endif
-+ skb_put(skb, desc->pkt_len);
-+
-+ debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len);
-+
-+ skb->protocol = hdlc_type_trans(skb, dev);
-+ dev->last_rx = jiffies;
-+ stats->rx_packets++;
-+ stats->rx_bytes += skb->len;
-+ netif_receive_skb(skb);
-+
-+ /* put the new buffer on RX-free queue */
-+#ifdef __ARMEB__
-+ port->rx_buff_tab[n] = temp;
-+ desc->data = phys;
-+#endif
-+ desc->buf_len = RX_SIZE;
-+ desc->pkt_len = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ quota--;
-+ received++;
-+ }
-+ dev->quota -= received;
-+ *budget -= received;
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
-+#endif
-+ return 1; /* not all work done */
-+}
-+
-+
-+static void hss_hdlc_txdone_irq(void *pdev)
-+{
-+ struct net_device *dev = pdev;
-+ struct port *port = dev_to_port(dev);
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ int n_desc;
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
-+#endif
-+ while ((n_desc = queue_get_desc(queue_ids[port->id].txdone,
-+ port, 1)) >= 0) {
-+ struct desc *desc;
-+ int start;
-+
-+ desc = tx_desc_ptr(port, n_desc);
-+
-+ stats->tx_packets++;
-+ stats->tx_bytes += desc->pkt_len;
-+
-+ dma_unmap_tx(port, desc);
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
-+ port->netdev->name, port->tx_buff_tab[n_desc]);
-+#endif
-+ free_buffer_irq(port->tx_buff_tab[n_desc]);
-+ port->tx_buff_tab[n_desc] = NULL;
-+
-+ start = qmgr_stat_empty(port->plat->txreadyq);
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, n_desc), desc);
-+ if (start) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
-+ " ready\n", port->netdev->name);
-+#endif
-+ netif_wake_queue(port->netdev);
-+ }
-+ }
-+}
-+
-+static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct port *port = dev_to_port(dev);
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ unsigned int txreadyq = port->plat->txreadyq;
-+ int len, offset, bytes, n;
-+ void *mem;
-+ u32 phys;
-+ struct desc *desc;
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
-+#endif
-+
-+ if (unlikely(skb->len > HDLC_MAX_MRU)) {
-+ dev_kfree_skb(skb);
-+ stats->tx_errors++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len);
-+
-+ len = skb->len;
-+#ifdef __ARMEB__
-+ offset = 0; /* no need to keep alignment */
-+ bytes = len;
-+ mem = skb->data;
-+#else
-+ offset = (int)skb->data & 3; /* keep 32-bit alignment */
-+ bytes = ALIGN(offset + len, 4);
-+ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
-+ dev_kfree_skb(skb);
-+ stats->tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
-+ dev_kfree_skb(skb);
-+#endif
-+
-+ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+#ifdef __ARMEB__
-+ dev_kfree_skb(skb);
-+#else
-+ kfree(mem);
-+#endif
-+ stats->tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ n = queue_get_desc(txreadyq, port, 1);
-+ BUG_ON(n < 0);
-+ desc = tx_desc_ptr(port, n);
-+
-+#ifdef __ARMEB__
-+ port->tx_buff_tab[n] = skb;
-+#else
-+ port->tx_buff_tab[n] = mem;
-+#endif
-+ desc->data = phys + offset;
-+ desc->buf_len = desc->pkt_len = len;
-+
-+ wmb();
-+ queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
-+ dev->trans_start = jiffies;
-+
-+ if (qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
-+#endif
-+ netif_stop_queue(dev);
-+ /* we could miss TX ready interrupt */
-+ if (!qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
-+ dev->name);
-+#endif
-+ netif_wake_queue(dev);
-+ }
-+ }
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
-+#endif
-+ return NETDEV_TX_OK;
-+}
-+
-+
-+static int request_hdlc_queues(struct port *port)
-+{
-+ int err;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0);
-+ if (err)
-+ return err;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rxfree;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rx;
-+
-+ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_tx;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_txready;
-+ return 0;
-+
-+rel_txready:
-+ qmgr_release_queue(port->plat->txreadyq);
-+rel_tx:
-+ qmgr_release_queue(queue_ids[port->id].tx);
-+rel_rx:
-+ qmgr_release_queue(queue_ids[port->id].rx);
-+rel_rxfree:
-+ qmgr_release_queue(queue_ids[port->id].rxfree);
-+ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
-+ port->netdev->name);
-+ return err;
-+}
-+
-+static void release_hdlc_queues(struct port *port)
-+{
-+ qmgr_release_queue(queue_ids[port->id].rxfree);
-+ qmgr_release_queue(queue_ids[port->id].rx);
-+ qmgr_release_queue(queue_ids[port->id].txdone);
-+ qmgr_release_queue(queue_ids[port->id].tx);
-+ qmgr_release_queue(port->plat->txreadyq);
-+}
-+
-+static int init_hdlc_queues(struct port *port)
-+{
-+ int i;
-+
-+ if (!ports_open)
-+ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
-+ POOL_ALLOC_SIZE, 32, 0)))
-+ return -ENOMEM;
-+
-+ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
-+ &port->desc_tab_phys)))
-+ return -ENOMEM;
-+ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
-+ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
-+ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
-+
-+ /* Setup RX buffers */
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff;
-+ void *data;
-+#ifdef __ARMEB__
-+ if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE)))
-+ return -ENOMEM;
-+ data = buff->data;
-+#else
-+ if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL)))
-+ return -ENOMEM;
-+ data = buff;
-+#endif
-+ desc->buf_len = RX_SIZE;
-+ desc->data = dma_map_single(&port->netdev->dev, data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(desc->data)) {
-+ free_buffer(buff);
-+ return -EIO;
-+ }
-+ port->rx_buff_tab[i] = buff;
-+ }
-+
-+ return 0;
-+}
-+
-+static void destroy_hdlc_queues(struct port *port)
-+{
-+ int i;
-+
-+ if (port->desc_tab) {
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff = port->rx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_single(&port->netdev->dev,
-+ desc->data, RX_SIZE,
-+ DMA_FROM_DEVICE);
-+ free_buffer(buff);
-+ }
-+ }
-+ for (i = 0; i < TX_DESCS; i++) {
-+ struct desc *desc = tx_desc_ptr(port, i);
-+ buffer_t *buff = port->tx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_tx(port, desc);
-+ free_buffer(buff);
-+ }
-+ }
-+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
-+ port->desc_tab = NULL;
-+ }
-+
-+ if (!ports_open && dma_pool) {
-+ dma_pool_destroy(dma_pool);
-+ dma_pool = NULL;
-+ }
-+}
-+
-+static int hss_hdlc_open(struct net_device *dev)
-+{
-+ struct port *port = dev_to_port(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int i, err;
-+
-+ if (!npe_running(npe)) {
-+ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
-+ if (err)
-+ return err;
-+ }
-+
-+ if ((err = hdlc_open(dev)) != 0)
-+ return err;
-+
-+ if (port->plat->open)
-+ if ((err = port->plat->open(port->id, port->netdev,
-+ hss_hdlc_set_carrier)) != 0)
-+ goto err_hdlc_close;
-+
-+ /* HSS main configuration */
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = 0; /* offset in HSS config */
-+
-+ msg.data32 = PCR_FRM_PULSE_DISABLED |
-+ PCR_SOF_NO_FBIT |
-+ PCR_MSB_ENDIAN |
-+ PCR_TX_DATA_ENABLE;
-+
-+ if (port->clock_type == CLOCK_INT)
-+ msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
-+
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_PCR") != 0))
-+ goto err_plat_close; /* 0: TX PCR */
-+
-+ msg.index = 4;
-+ msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_PCR") != 0))
-+ goto err_plat_close; /* 4: RX PCR */
-+
-+ msg.index = 8;
-+ msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) |
-+ (port->id ? CCR_SECOND_HSS : 0);
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CORE_CR") != 0))
-+ goto err_plat_close; /* 8: Core CR */
-+
-+ msg.index = 12;
-+ msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CLK_CR") != 0))
-+ goto err_plat_close; /* 12: CLK CR */
-+
-+ msg.data32 = (FRAME_SYNC_OFFSET << 16) | (FRAME_SYNC_SIZE - 1);
-+ msg.index = 16;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_FCR") != 0))
-+ goto err_plat_close; /* 16: TX FCR */
-+
-+ msg.index = 20;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_FCR") != 0))
-+ goto err_plat_close; /* 20: RX FCR */
-+
-+ msg.data32 = 0; /* Fill LUT with HDLC timeslots */
-+ for (i = 0; i < 32 / LUT_BITS; i++)
-+ msg.data32 |= TDMMAP_HDLC << (LUT_BITS * i);
-+
-+ for (i = 0; i < 2 /* TX and RX */ * TIMESLOTS * LUT_BITS / 8; i += 4) {
-+ msg.index = 24 + i; /* 24 - 55: TX LUT, 56 - 87: RX LUT */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_LUT") != 0))
-+ goto err_plat_close;
-+ }
-+
-+ /* HDLC mode configuration */
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_NUM_PIPES_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = PKT_NUM_PIPES;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_PIPES") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = PKT_PIPE_FIFO_SIZEW;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_FIFO") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data32 = 0x7F7F7F7F;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_IDLE") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_LOAD;
-+ msg.hss_port = port->id;
-+ if ((err = npe_send_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
-+ goto err_plat_close;
-+ if ((err = npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
-+ goto err_plat_close;
-+
-+ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
-+ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
-+ printk(KERN_DEBUG "%s: unexpected message received in"
-+ " response to HSS_LOAD_CONFIG\n", npe_name(npe));
-+ err = EIO;
-+ goto err_plat_close;
-+ }
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = port->hdlc_cfg; /* rx_cfg */
-+ msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_HDLC_CFG") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_MODE_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = NPE_PKT_MODE_HDLC;
-+ /* msg.data8b = inv_mask */
-+ /* msg.data8c = or_mask */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_MODE") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data16a = HDLC_MAX_MRU;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_RX_SIZE") != 0))
-+ goto err_plat_close;
-+
-+ if ((err = request_hdlc_queues(port)) != 0)
-+ goto err_plat_close;
-+
-+ if ((err = init_hdlc_queues(port)) != 0)
-+ goto err_destroy_queues;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FLOW_ENABLE;
-+ msg.hss_port = port->id;
-+ if ((err = npe_send_message(npe, &msg, "HSS_ENABLE_PKT_PIPE") != 0))
-+ goto err_destroy_queues;
-+
-+ /* Populate queues with buffers, no failure after this point */
-+ for (i = 0; i < TX_DESCS; i++)
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
-+
-+ for (i = 0; i < RX_DESCS; i++)
-+ queue_put_desc(queue_ids[port->id].rxfree,
-+ rx_desc_phys(port, i), rx_desc_ptr(port, i));
-+
-+ netif_start_queue(dev);
-+
-+ qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ hss_hdlc_rx_irq, dev);
-+
-+ qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ hss_hdlc_txdone_irq, dev);
-+ qmgr_enable_irq(queue_ids[port->id].txdone);
-+
-+ ports_open++;
-+ netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
-+ return 0;
-+
-+err_destroy_queues:
-+ destroy_hdlc_queues(port);
-+ release_hdlc_queues(port);
-+err_plat_close:
-+ if (port->plat->close)
-+ port->plat->close(port->id, port->netdev);
-+err_hdlc_close:
-+ hdlc_close(dev);
-+ return err;
-+}
-+
-+static int hss_hdlc_close(struct net_device *dev)
-+{
-+ struct port *port = dev_to_port(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int buffs = RX_DESCS; /* allocated RX buffers */
-+ int i;
-+
-+ ports_open--;
-+ qmgr_disable_irq(queue_ids[port->id].rx);
-+ netif_stop_queue(dev);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FLOW_DISABLE;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "HSS_DISABLE_PKT_PIPE")) {
-+ printk(KERN_CRIT "HSS-%i: unable to stop HDLC flow\n",
-+ port->id);
-+ /* The upper level would ignore the error anyway */
-+ }
-+
-+ while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
-+ buffs--;
-+ while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
-+ buffs--;
-+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
-+ " left in NPE\n", dev->name, buffs);
-+
-+ buffs = TX_DESCS;
-+ while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
-+ buffs--; /* cancel TX */
-+
-+ i = 0;
-+ do {
-+ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ } while (++i < MAX_CLOSE_WAIT);
-+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
-+ "left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
-+#endif
-+ qmgr_disable_irq(queue_ids[port->id].txdone);
-+ destroy_hdlc_queues(port);
-+ release_hdlc_queues(port);
-+
-+ if (port->plat->close)
-+ port->plat->close(port->id, port->netdev);
-+ hdlc_close(dev);
-+ return 0;
-+}
-+
-+
-+static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
-+ unsigned short parity)
-+{
-+ struct port *port = dev_to_port(dev);
-+
-+ if (encoding != ENCODING_NRZ)
-+ return -EINVAL;
-+
-+ switch(parity) {
-+ case PARITY_CRC16_PR1_CCITT:
-+ port->hdlc_cfg = 0;
-+ return 0;
-+
-+ case PARITY_CRC32_PR1_CCITT:
-+ port->hdlc_cfg = PKT_HDLC_CRC_32;
-+ return 0;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+
-+static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ const size_t size = sizeof(sync_serial_settings);
-+ sync_serial_settings new_line;
-+ int clk;
-+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
-+ struct port *port = dev_to_port(dev);
-+
-+ if (cmd != SIOCWANDEV)
-+ return hdlc_ioctl(dev, ifr, cmd);
-+
-+ switch(ifr->ifr_settings.type) {
-+ case IF_GET_IFACE:
-+ ifr->ifr_settings.type = IF_IFACE_V35;
-+ if (ifr->ifr_settings.size < size) {
-+ ifr->ifr_settings.size = size; /* data size wanted */
-+ return -ENOBUFS;
-+ }
-+ memset(&new_line, 0, sizeof(new_line));
-+ new_line.clock_type = port->clock_type;
-+ new_line.clock_rate = port->clock_rate;
-+ new_line.loopback = port->loopback;
-+ if (copy_to_user(line, &new_line, size))
-+ return -EFAULT;
-+ return 0;
-+
-+ case IF_IFACE_SYNC_SERIAL:
-+ case IF_IFACE_V35:
-+ if(!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (dev->flags & IFF_UP)
-+ return -EBUSY; /* Cannot change parameters when open */
-+
-+ if (copy_from_user(&new_line, line, size))
-+ return -EFAULT;
-+
-+ clk = new_line.clock_type;
-+ if (port->plat->set_clock)
-+ clk = port->plat->set_clock(port->id, clk);
-+
-+ if (clk != CLOCK_EXT && clk != CLOCK_INT)
-+ return -EINVAL; /* No such clock setting */
-+
-+ if (new_line.loopback != 0 && new_line.loopback != 1)
-+ return -EINVAL;
-+
-+ port->clock_type = clk; /* Update settings */
-+ port->clock_rate = new_line.clock_rate;
-+ port->loopback = new_line.loopback;
-+ return 0;
-+
-+ default:
-+ return hdlc_ioctl(dev, ifr, cmd);
-+ }
-+}
-+
-+
-+static int __devinit hss_init_one(struct platform_device *pdev)
-+{
-+ struct port *port;
-+ struct net_device *dev;
-+ hdlc_device *hdlc;
-+ int err;
-+
-+ if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+ return -ENOMEM;
-+ platform_set_drvdata(pdev, port);
-+ port->id = pdev->id;
-+
-+ if ((port->npe = npe_request(0)) == NULL) {
-+ err = -ENOSYS;
-+ goto err_free;
-+ }
-+
-+ port->plat = pdev->dev.platform_data;
-+ if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
-+ err = -ENOMEM;
-+ goto err_plat;
-+ }
-+
-+ SET_MODULE_OWNER(net);
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+ hdlc = dev_to_hdlc(dev);
-+ hdlc->attach = hss_hdlc_attach;
-+ hdlc->xmit = hss_hdlc_xmit;
-+ dev->open = hss_hdlc_open;
-+ dev->poll = hss_hdlc_poll;
-+ dev->stop = hss_hdlc_close;
-+ dev->do_ioctl = hss_hdlc_ioctl;
-+ dev->weight = 16;
-+ dev->tx_queue_len = 100;
-+ port->clock_type = CLOCK_EXT;
-+ port->clock_rate = 2048000;
-+
-+ if (register_hdlc_device(dev)) {
-+ printk(KERN_ERR "HSS-%i: unable to register HDLC device\n",
-+ port->id);
-+ err = -ENOBUFS;
-+ goto err_free_netdev;
-+ }
-+ printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
-+ return 0;
-+
-+err_free_netdev:
-+ free_netdev(dev);
-+err_plat:
-+ npe_release(port->npe);
-+ platform_set_drvdata(pdev, NULL);
-+err_free:
-+ kfree(port);
-+ return err;
-+}
-+
-+static int __devexit hss_remove_one(struct platform_device *pdev)
-+{
-+ struct port *port = platform_get_drvdata(pdev);
-+
-+ unregister_hdlc_device(port->netdev);
-+ free_netdev(port->netdev);
-+ npe_release(port->npe);
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(port);
-+ return 0;
-+}
-+
-+static struct platform_driver drv = {
-+ .driver.name = DRV_NAME,
-+ .probe = hss_init_one,
-+ .remove = hss_remove_one,
-+};
-+
-+static int __init hss_init_module(void)
-+{
-+ if ((ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
-+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
-+ return -ENOSYS;
-+ return platform_driver_register(&drv);
-+}
-+
-+static void __exit hss_cleanup_module(void)
-+{
-+ platform_driver_unregister(&drv);
-+}
-+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
-+MODULE_LICENSE("GPL v2");
-+module_init(hss_init_module);
-+module_exit(hss_cleanup_module);
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/cpu.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/cpu.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/cpu.h
-@@ -28,4 +28,19 @@ extern unsigned int processor_id;
- #define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP465_PROCESSOR_ID_VALUE)
-
-+static inline u32 ixp4xx_read_feature_bits(void)
-+{
-+ unsigned int val = ~*IXP4XX_EXP_CFG2;
-+ val &= ~IXP4XX_FEATURE_RESERVED;
-+ if (!cpu_is_ixp46x())
-+ val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
-+
-+ return val;
-+}
-+
-+static inline void ixp4xx_write_feature_bits(u32 value)
-+{
-+ *IXP4XX_EXP_CFG2 = ~value;
-+}
-+
- #endif /* _ASM_ARCH_CPU_H */
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -27,13 +27,13 @@
-
- #define pcibios_assign_all_busses() 1
-
-+/* Register locations and bits */
-+#include "ixp4xx-regs.h"
-+
- #ifndef __ASSEMBLER__
- #include <asm/arch/cpu.h>
- #endif
-
--/* Register locations and bits */
--#include "ixp4xx-regs.h"
--
- /* Platform helper functions and definitions */
- #include "platform.h"
-
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-@@ -15,10 +15,6 @@
- *
- */
-
--#ifndef __ASM_ARCH_HARDWARE_H__
--#error "Do not include this directly, instead #include <asm/hardware.h>"
--#endif
--
- #ifndef _ASM_ARM_IXP4XX_H_
- #define _ASM_ARM_IXP4XX_H_
-
-@@ -607,4 +603,36 @@
-
- #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-+/* "fuse" bits of IXP_EXP_CFG2 */
-+#define IXP4XX_FEATURE_RCOMP (1 << 0)
-+#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
-+#define IXP4XX_FEATURE_HASH (1 << 2)
-+#define IXP4XX_FEATURE_AES (1 << 3)
-+#define IXP4XX_FEATURE_DES (1 << 4)
-+#define IXP4XX_FEATURE_HDLC (1 << 5)
-+#define IXP4XX_FEATURE_AAL (1 << 6)
-+#define IXP4XX_FEATURE_HSS (1 << 7)
-+#define IXP4XX_FEATURE_UTOPIA (1 << 8)
-+#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
-+#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
-+#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
-+#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
-+#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
-+#define IXP4XX_FEATURE_PCI (1 << 14)
-+#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
-+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
-+#define IXP4XX_FEATURE_USB_HOST (1 << 18)
-+#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
-+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
-+#define IXP4XX_FEATURE_RSA (1 << 21)
-+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
-+#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
-+
-+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
-+ IXP4XX_FEATURE_USB_HOST | \
-+ IXP4XX_FEATURE_NPEA_ETH | \
-+ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
-+ IXP4XX_FEATURE_RSA | \
-+ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-+
- #endif
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/npe.h
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/npe.h
-@@ -0,0 +1,39 @@
-+#ifndef __IXP4XX_NPE_H
-+#define __IXP4XX_NPE_H
-+
-+#include <linux/kernel.h>
-+
-+extern const char *npe_names[];
-+
-+struct npe_regs {
-+ u32 exec_addr, exec_data, exec_status_cmd, exec_count;
-+ u32 action_points[4];
-+ u32 watchpoint_fifo, watch_count;
-+ u32 profile_count;
-+ u32 messaging_status, messaging_control;
-+ u32 mailbox_status, /*messaging_*/ in_out_fifo;
-+};
-+
-+struct npe {
-+ struct resource *mem_res;
-+ struct npe_regs __iomem *regs;
-+ u32 regs_phys;
-+ int id;
-+ int valid;
-+};
-+
-+
-+static inline const char *npe_name(struct npe *npe)
-+{
-+ return npe_names[npe->id];
-+}
-+
-+int npe_running(struct npe *npe);
-+int npe_send_message(struct npe *npe, const void *msg, const char *what);
-+int npe_recv_message(struct npe *npe, void *msg, const char *what);
-+int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
-+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
-+struct npe *npe_request(int id);
-+void npe_release(struct npe *npe);
-+
-+#endif /* __IXP4XX_NPE_H */
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/platform.h
-@@ -77,8 +77,7 @@ extern unsigned long ixp4xx_exp_bus_size
-
- /*
- * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
-- * used to
-- * Used as platform_data to provide GPIO pin information to the ixp42x
-+ * used as platform_data to provide GPIO pin information to the ixp42x
- * I2C driver.
- */
- struct ixp4xx_i2c_pins {
-@@ -86,6 +85,27 @@ struct ixp4xx_i2c_pins {
- unsigned long scl_pin;
- };
-
-+#define IXP4XX_ETH_NPEA 0x00
-+#define IXP4XX_ETH_NPEB 0x10
-+#define IXP4XX_ETH_NPEC 0x20
-+
-+/* Information about built-in Ethernet MAC interfaces */
-+struct eth_plat_info {
-+ u8 phy; /* MII PHY ID, 0 - 31 */
-+ u8 rxq; /* configurable, currently 0 - 31 only */
-+ u8 txreadyq;
-+ u8 hwaddr[6];
-+};
-+
-+/* Information about built-in HSS (synchronous serial) interfaces */
-+struct hss_plat_info {
-+ int (*set_clock)(int port, unsigned int clock_type);
-+ int (*open)(int port, void *pdev,
-+ void (*set_carrier_cb)(void *pdev, int carrier));
-+ void (*close)(int port, void *pdev);
-+ u8 txreadyq;
-+};
-+
- /*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/qmgr.h
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/qmgr.h
-@@ -0,0 +1,126 @@
-+/*
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#ifndef IXP4XX_QMGR_H
-+#define IXP4XX_QMGR_H
-+
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+
-+#define HALF_QUEUES 32
-+#define QUEUES 64 /* only 32 lower queues currently supported */
-+#define MAX_QUEUE_LENGTH 4 /* in dwords */
-+
-+#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
-+#define QUEUE_STAT1_NEARLY_EMPTY 2
-+#define QUEUE_STAT1_NEARLY_FULL 4
-+#define QUEUE_STAT1_FULL 8
-+#define QUEUE_STAT2_UNDERFLOW 1
-+#define QUEUE_STAT2_OVERFLOW 2
-+
-+#define QUEUE_WATERMARK_0_ENTRIES 0
-+#define QUEUE_WATERMARK_1_ENTRY 1
-+#define QUEUE_WATERMARK_2_ENTRIES 2
-+#define QUEUE_WATERMARK_4_ENTRIES 3
-+#define QUEUE_WATERMARK_8_ENTRIES 4
-+#define QUEUE_WATERMARK_16_ENTRIES 5
-+#define QUEUE_WATERMARK_32_ENTRIES 6
-+#define QUEUE_WATERMARK_64_ENTRIES 7
-+
-+/* queue interrupt request conditions */
-+#define QUEUE_IRQ_SRC_EMPTY 0
-+#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1
-+#define QUEUE_IRQ_SRC_NEARLY_FULL 2
-+#define QUEUE_IRQ_SRC_FULL 3
-+#define QUEUE_IRQ_SRC_NOT_EMPTY 4
-+#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5
-+#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6
-+#define QUEUE_IRQ_SRC_NOT_FULL 7
-+
-+struct qmgr_regs {
-+ u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
-+ u32 stat1[4]; /* 0x400 - 0x40F */
-+ u32 stat2[2]; /* 0x410 - 0x417 */
-+ u32 statne_h; /* 0x418 - queue nearly empty */
-+ u32 statf_h; /* 0x41C - queue full */
-+ u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */
-+ u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */
-+ u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */
-+ u32 reserved[1776];
-+ u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */
-+};
-+
-+void qmgr_set_irq(unsigned int queue, int src,
-+ void (*handler)(void *pdev), void *pdev);
-+void qmgr_enable_irq(unsigned int queue);
-+void qmgr_disable_irq(unsigned int queue);
-+
-+/* request_ and release_queue() must be called from non-IRQ context */
-+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-+ unsigned int nearly_empty_watermark,
-+ unsigned int nearly_full_watermark);
-+void qmgr_release_queue(unsigned int queue);
-+
-+
-+static inline void qmgr_put_entry(unsigned int queue, u32 val)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ __raw_writel(val, &qmgr_regs->acc[queue][0]);
-+}
-+
-+static inline u32 qmgr_get_entry(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return __raw_readl(&qmgr_regs->acc[queue][0]);
-+}
-+
-+static inline int qmgr_get_stat1(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
-+ >> ((queue & 7) << 2)) & 0xF;
-+}
-+
-+static inline int qmgr_get_stat2(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
-+ >> ((queue & 0xF) << 1)) & 0x3;
-+}
-+
-+static inline int qmgr_stat_empty(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
-+}
-+
-+static inline int qmgr_stat_nearly_empty(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
-+}
-+
-+static inline int qmgr_stat_nearly_full(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
-+}
-+
-+static inline int qmgr_stat_full(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
-+}
-+
-+static inline int qmgr_stat_underflow(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
-+}
-+
-+static inline int qmgr_stat_overflow(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
-+}
-+
-+#endif
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -13,7 +13,7 @@
- #ifndef _ARCH_UNCOMPRESS_H_
- #define _ARCH_UNCOMPRESS_H_
-
--#include <asm/hardware.h>
-+#include "ixp4xx-regs.h"
- #include <asm/mach-types.h>
- #include <linux/serial_reg.h>
-
diff --git a/target/linux/ixp4xx/patches-2.6.23/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-2.6.23/201-npe_driver_print_license_location.patch
deleted file mode 100644
index c986227866..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/201-npe_driver_print_license_location.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -588,6 +588,8 @@ int npe_load_firmware(struct npe *npe, c
- npe_reset(npe);
- #endif
-
-+ print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
-+
- print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
- "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
- (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-2.6.23/202-npe_driver_no_phy.patch b/target/linux/ixp4xx/patches-2.6.23/202-npe_driver_no_phy.patch
deleted file mode 100644
index b3c9ca0246..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/202-npe_driver_no_phy.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.23.17/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.23.17/drivers/net/arm/ixp4xx_eth.c
-@@ -297,6 +297,27 @@ static int mdio_read(struct net_device *
- unsigned long flags;
- u16 val;
-
-+ /* For boards that use a switch chip (eg. Marvell 88E6060) */
-+ if ( phy_id < 0 || phy_id > 31 ) {
-+ switch (location) {
-+ case MII_BMCR:
-+ val = 0x3100;
-+ break;
-+ case MII_BMSR:
-+ val = 0x406d;
-+ break;
-+ case MII_ADVERTISE:
-+ val = 0x0101;
-+ break;
-+ case MII_LPA:
-+ val = 0x4101;
-+ break;
-+ default:
-+ val = 0;
-+ break;
-+ }
-+ return val;
-+ }
- spin_lock_irqsave(&mdio_lock, flags);
- val = mdio_cmd(dev, phy_id, location, 0, 0);
- spin_unlock_irqrestore(&mdio_lock, flags);
-@@ -308,6 +329,9 @@ static void mdio_write(struct net_device
- {
- unsigned long flags;
-
-+ if ( phy_id < 0 || phy_id > 31 ) {
-+ return;
-+ }
- spin_lock_irqsave(&mdio_lock, flags);
- mdio_cmd(dev, phy_id, location, 1, val);
- spin_unlock_irqrestore(&mdio_lock, flags);
diff --git a/target/linux/ixp4xx/patches-2.6.23/294-eeprom_new_notifier.patch b/target/linux/ixp4xx/patches-2.6.23/294-eeprom_new_notifier.patch
deleted file mode 100644
index f91e7784ff..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/294-eeprom_new_notifier.patch
+++ /dev/null
@@ -1,190 +0,0 @@
-Index: linux-2.6.23.17/drivers/i2c/chips/eeprom.c
-===================================================================
---- linux-2.6.23.17.orig/drivers/i2c/chips/eeprom.c
-+++ linux-2.6.23.17/drivers/i2c/chips/eeprom.c
-@@ -33,6 +33,8 @@
- #include <linux/jiffies.h>
- #include <linux/i2c.h>
- #include <linux/mutex.h>
-+#include <linux/notifier.h>
-+#include <linux/eeprom.h>
-
- /* Addresses to scan */
- static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
-@@ -41,26 +43,7 @@ static unsigned short normal_i2c[] = { 0
- /* Insmod parameters */
- I2C_CLIENT_INSMOD_1(eeprom);
-
--
--/* Size of EEPROM in bytes */
--#define EEPROM_SIZE 256
--
--/* possible types of eeprom devices */
--enum eeprom_nature {
-- UNKNOWN,
-- VAIO,
--};
--
--/* Each client has this additional data */
--struct eeprom_data {
-- struct i2c_client client;
-- struct mutex update_lock;
-- u8 valid; /* bitfield, bit!=0 if slice is valid */
-- unsigned long last_updated[8]; /* In jiffies, 8 slices */
-- u8 data[EEPROM_SIZE]; /* Register values */
-- enum eeprom_nature nature;
--};
--
-+ATOMIC_NOTIFIER_HEAD(eeprom_chain);
-
- static int eeprom_attach_adapter(struct i2c_adapter *adapter);
- static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
-@@ -198,6 +181,7 @@ static int eeprom_detect(struct i2c_adap
- data->valid = 0;
- mutex_init(&data->update_lock);
- data->nature = UNKNOWN;
-+ data->attr = &eeprom_attr;
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
-@@ -225,6 +209,9 @@ static int eeprom_detect(struct i2c_adap
- if (err)
- goto exit_detach;
-
-+ /* call the notifier chain */
-+ atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
-+
- return 0;
-
- exit_detach:
-@@ -250,6 +237,41 @@ static int eeprom_detach_client(struct i
- return 0;
- }
-
-+/**
-+ * register_eeprom_notifier - register a 'user' of EEPROM devices.
-+ * @nb: pointer to notifier info structure
-+ *
-+ * Registers a callback function to be called upon detection
-+ * of an EEPROM device. Detection invokes the 'add' callback
-+ * with the kobj of the mutex and a bin_attribute which allows
-+ * read from the EEPROM. The intention is that the notifier
-+ * will be able to read system configuration from the notifier.
-+ *
-+ * Only EEPROMs detected *after* the addition of the notifier
-+ * are notified. I.e. EEPROMs already known to the system
-+ * will not be notified - add the notifier from board level
-+ * code!
-+ */
-+int register_eeprom_notifier(struct notifier_block *nb)
-+{
-+ return atomic_notifier_chain_register(&eeprom_chain, nb);
-+}
-+
-+/**
-+ * unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
-+ * @old: pointer to notifier info structure
-+ *
-+ * Removes a callback function from the list of 'users' to be
-+ * notified upon detection of EEPROM devices.
-+ */
-+int unregister_eeprom_notifier(struct notifier_block *nb)
-+{
-+ return atomic_notifier_chain_unregister(&eeprom_chain, nb);
-+}
-+
-+EXPORT_SYMBOL_GPL(register_eeprom_notifier);
-+EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
-+
- static int __init eeprom_init(void)
- {
- return i2c_add_driver(&eeprom_driver);
-Index: linux-2.6.23.17/include/linux/eeprom.h
-===================================================================
---- /dev/null
-+++ linux-2.6.23.17/include/linux/eeprom.h
-@@ -0,0 +1,71 @@
-+#ifndef _LINUX_EEPROM_H
-+#define _LINUX_EEPROM_H
-+/*
-+ * EEPROM notifier header
-+ *
-+ * Copyright (C) 2006 John Bowler
-+ */
-+
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __KERNEL__
-+#error This is a kernel header
-+#endif
-+
-+#include <linux/list.h>
-+#include <linux/kobject.h>
-+#include <linux/sysfs.h>
-+
-+/* Size of EEPROM in bytes */
-+#define EEPROM_SIZE 256
-+
-+/* possible types of eeprom devices */
-+enum eeprom_nature {
-+ UNKNOWN,
-+ VAIO,
-+};
-+
-+/* Each client has this additional data */
-+struct eeprom_data {
-+ struct i2c_client client;
-+ struct mutex update_lock;
-+ u8 valid; /* bitfield, bit!=0 if slice is valid */
-+ unsigned long last_updated[8]; /* In jiffies, 8 slices */
-+ u8 data[EEPROM_SIZE]; /* Register values */
-+ enum eeprom_nature nature;
-+ struct bin_attribute *attr;
-+};
-+
-+/*
-+ * This is very basic.
-+ *
-+ * If an EEPROM is detected on the I2C bus (this only works for
-+ * I2C EEPROMs) the notifier chain is called with
-+ * both the I2C information and the kobject for the sysfs
-+ * device which has been registers. It is then possible to
-+ * read from the device via the bin_attribute::read method
-+ * to extract configuration information.
-+ *
-+ * Register the notifier in the board level code, there is no
-+ * need to unregister it but you can if you want (it will save
-+ * a little bit or kernel memory to do so).
-+ */
-+
-+extern int register_eeprom_notifier(struct notifier_block *nb);
-+extern int unregister_eeprom_notifier(struct notifier_block *nb);
-+
-+#endif /* _LINUX_EEPROM_H */
-Index: linux-2.6.23.17/include/linux/notifier.h
-===================================================================
---- linux-2.6.23.17.orig/include/linux/notifier.h
-+++ linux-2.6.23.17/include/linux/notifier.h
-@@ -231,5 +231,8 @@ static inline int notifier_to_errno(int
- #define PM_SUSPEND_PREPARE 0x0003 /* Going to suspend the system */
- #define PM_POST_SUSPEND 0x0004 /* Suspend finished */
-
-+/* eeprom notifier chain */
-+#define EEPROM_REGISTER 0x0001
-+
- #endif /* __KERNEL__ */
- #endif /* _LINUX_NOTIFIER_H */
diff --git a/target/linux/ixp4xx/patches-2.6.23/296-avila_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.23/296-avila_mac_plat_info.patch
deleted file mode 100644
index dfaf7ffa3d..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/296-avila_mac_plat_info.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -132,10 +132,37 @@ static struct platform_device avila_pata
- .resource = avila_pata_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info avila_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device avila_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = avila_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = avila_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
-- &avila_uart
-+ &avila_uart,
-+ &avila_eth[0],
-+ &avila_eth[1],
- };
-
- static void __init avila_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.23/298-avila_rtc_fixup.patch b/target/linux/ixp4xx/patches-2.6.23/298-avila_rtc_fixup.patch
deleted file mode 100644
index 4bee2044fb..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/298-avila_rtc_fixup.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -165,6 +165,35 @@ static struct platform_device *avila_dev
- &avila_eth[1],
- };
-
-+static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
-+
-+static void __init avila_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(avila_rtc_probe) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, avila_rtc_probe, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(avila_rtc_probe), p,
-+ COMMAND_LINE_SIZE - strlen(avila_rtc_probe));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init avila_init(void)
- {
- ixp4xx_sys_init();
-@@ -192,6 +221,7 @@ MACHINE_START(AVILA, "Gateworks Avila Ne
- /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = avila_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
-@@ -209,6 +239,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc
- /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = avila_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.23/300-avila_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.23/300-avila_fetch_mac.patch
deleted file mode 100644
index 7303399e56..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/300-avila_fetch_mac.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -14,10 +14,18 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#ifdef CONFIG_SENSORS_EEPROM
-+# include <linux/i2c.h>
-+# include <linux/eeprom.h>
-+#endif
-+
- #include <linux/i2c-gpio.h>
-
- #include <asm/types.h>
-@@ -194,9 +202,48 @@ static void __init avila_fixup(struct ma
- t->hdr.size = 0;
- }
-
-+#ifdef CONFIG_SENSORS_EEPROM
-+static int loft_eeprom_do(struct notifier_block *self, unsigned long event, void *t)
-+{
-+ struct eeprom_data *data = t;
-+ struct sockaddr address;
-+ struct net_device * netdev ;
-+
-+ char macs[12];
-+
-+ /* The MACs are the first 12 bytes in the eeprom at address 0x51 */
-+ if (event == EEPROM_REGISTER && data->client.addr == 0x51) {
-+ data->attr->read(&data->client.dev.kobj, data->attr, macs, 0, 12);
-+ /*eth0*/
-+ /* using dev_get_by_name here is really ugly and can cause
-+ * confusion if other ethernet devices are present. FIXME */
-+
-+ memcpy(address.sa_data, macs, ETH_ALEN);
-+ memcpy(&avila_plat_eth[0].hwaddr, macs, ETH_ALEN);
-+ if ( (netdev = dev_get_by_name("eth0")) )
-+ netdev->set_mac_address(netdev, &address);
-+
-+ /*same for eth1*/
-+ memcpy(address.sa_data, macs + ETH_ALEN, ETH_ALEN);
-+ memcpy(&avila_plat_eth[1].hwaddr, macs + ETH_ALEN, ETH_ALEN);
-+ if ( (netdev = dev_get_by_name("eth1")) )
-+ netdev->set_mac_address(netdev, &address);
-+ }
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block loft_eeprom_notifier = {
-+ .notifier_call = loft_eeprom_do
-+};
-+#endif
-+
- static void __init avila_init(void)
- {
- ixp4xx_sys_init();
-+#ifdef CONFIG_SENSORS_EEPROM
-+ register_eeprom_notifier(&loft_eeprom_notifier);
-+#endif
-
- avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- avila_flash_resource.end =
diff --git a/target/linux/ixp4xx/patches-2.6.23/301-avila_led.patch b/target/linux/ixp4xx/patches-2.6.23/301-avila_led.patch
deleted file mode 100644
index f4b56a0ea9..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/301-avila_led.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -165,12 +165,34 @@ static struct platform_device avila_eth[
- }
- };
-
-+#ifdef CONFIG_LEDS_IXP4XX
-+static struct resource avila_led_resources[] = {
-+ {
-+ .name = "user",
-+ .start = AVILA_LED_USER_GPIO,
-+ .end = AVILA_LED_USER_GPIO,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+};
-+
-+static struct platform_device avila_leds = {
-+ .name = "IXP4XX-GPIO-LED",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(avila_led_resources),
-+ .resource = avila_led_resources,
-+};
-+#endif
-+
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
- &avila_uart,
- &avila_eth[0],
- &avila_eth[1],
-+#ifdef CONFIG_LEDS_IXP4XX
-+ &avila_leds,
-+#endif
- };
-
- static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/avila.h
-@@ -36,4 +36,5 @@
- #define AVILA_PCI_INTC_PIN 9
- #define AVILA_PCI_INTD_PIN 8
-
--
-+/* User LED */
-+#define AVILA_LED_USER_GPIO 3
diff --git a/target/linux/ixp4xx/patches-2.6.23/302-gpio_device.patch b/target/linux/ixp4xx/patches-2.6.23/302-gpio_device.patch
deleted file mode 100644
index a1f0ee45b8..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/302-gpio_device.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -183,6 +183,23 @@ static struct platform_device avila_leds
- };
- #endif
-
-+#ifdef CONFIG_GPIO_DEVICE
-+static struct resource avila_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ .start = AVILA_GPIO_MASK,
-+ .end = AVILA_GPIO_MASK,
-+ .flags = 0,
-+ },
-+};
-+
-+static struct platform_device avila_gpio = {
-+ .name = "GPIODEV",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(avila_gpio_resources),
-+ .resource = avila_gpio_resources,
-+};
-+#endif
-
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
-@@ -193,6 +210,9 @@ static struct platform_device *avila_dev
- #ifdef CONFIG_LEDS_IXP4XX
- &avila_leds,
- #endif
-+#ifdef CONFIG_GPIO_DEVICE
-+ &avila_gpio,
-+#endif
- };
-
- static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/avila.h
-@@ -38,3 +38,6 @@
-
- /* User LED */
- #define AVILA_LED_USER_GPIO 3
-+
-+/* gpio mask used by platform device */
-+#define AVILA_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
diff --git a/target/linux/ixp4xx/patches-2.6.23/400-dmabounce.patch b/target/linux/ixp4xx/patches-2.6.23/400-dmabounce.patch
deleted file mode 100644
index cd7b05856a..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/400-dmabounce.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/common/dmabounce.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/common/dmabounce.c
-+++ linux-2.6.23.17/arch/arm/common/dmabounce.c
-@@ -116,6 +116,10 @@ alloc_safe_buffer(struct dmabounce_devic
- } else if (size <= device_info->large.size) {
- pool = &device_info->large;
- } else {
-+#ifdef CONFIG_DMABOUNCE_DEBUG
-+ printk(KERN_INFO "A dma bounce buffer outside the pool size was requested. Requested size was 0x%08X\nThe calling code was :\n", size);
-+ dump_stack();
-+#endif
- pool = NULL;
- }
-
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
-@@ -220,6 +220,11 @@ config DMABOUNCE
- default y
- depends on PCI
-
-+config DMABOUNCE_DEBUG
-+ bool "Enable DMABounce debuging"
-+ default n
-+ depends on DMABOUNCE
-+
- config IXP4XX_INDIRECT_PCI
- bool "Use indirect PCI memory access"
- depends on PCI
diff --git a/target/linux/ixp4xx/patches-2.6.23/401-avila_pci_dev.patch b/target/linux/ixp4xx/patches-2.6.23/401-avila_pci_dev.patch
deleted file mode 100644
index 8971bb2099..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/401-avila_pci_dev.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/avila.h
-@@ -25,7 +25,7 @@
- /*
- * AVILA PCI IRQs
- */
--#define AVILA_PCI_MAX_DEV 4
-+#define AVILA_PCI_MAX_DEV 6
- #define LOFT_PCI_MAX_DEV 6
- #define AVILA_PCI_IRQ_LINES 4
-
diff --git a/target/linux/ixp4xx/patches-2.6.24/010-rtc_new_style.patch b/target/linux/ixp4xx/patches-2.6.24/010-rtc_new_style.patch
deleted file mode 100644
index 2293b8b02f..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/010-rtc_new_style.patch
+++ /dev/null
@@ -1,1032 +0,0 @@
----
- drivers/rtc/rtc-isl1208.c | 357 +++++++++++++++++++++-------------------------
- 1 file changed, 170 insertions(+), 187 deletions(-)
-
-Index: linux-2.6.24.7/drivers/rtc/rtc-isl1208.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/rtc/rtc-isl1208.c
-+++ linux-2.6.24.7/drivers/rtc/rtc-isl1208.c
-@@ -15,16 +15,15 @@
- #include <linux/bcd.h>
- #include <linux/rtc.h>
-
--#define DRV_NAME "isl1208"
--#define DRV_VERSION "0.2"
-+#define DRV_VERSION "0.3"
-
- /* Register map */
- /* rtc section */
- #define ISL1208_REG_SC 0x00
- #define ISL1208_REG_MN 0x01
- #define ISL1208_REG_HR 0x02
--#define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
--#define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
-+#define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
-+#define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
- #define ISL1208_REG_DT 0x03
- #define ISL1208_REG_MO 0x04
- #define ISL1208_REG_YR 0x05
-@@ -33,14 +32,14 @@
-
- /* control/status section */
- #define ISL1208_REG_SR 0x07
--#define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
--#define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
--#define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
--#define ISL1208_REG_SR_ALM (1<<2) /* alarm */
--#define ISL1208_REG_SR_BAT (1<<1) /* battery */
--#define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
-+#define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
-+#define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
-+#define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
-+#define ISL1208_REG_SR_ALM (1<<2) /* alarm */
-+#define ISL1208_REG_SR_BAT (1<<1) /* battery */
-+#define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
- #define ISL1208_REG_INT 0x08
--#define ISL1208_REG_09 0x09 /* reserved */
-+#define ISL1208_REG_09 0x09 /* reserved */
- #define ISL1208_REG_ATR 0x0a
- #define ISL1208_REG_DTR 0x0b
-
-@@ -58,35 +57,18 @@
- #define ISL1208_REG_USR2 0x13
- #define ISL1208_USR_SECTION_LEN 2
-
--/* i2c configuration */
--#define ISL1208_I2C_ADDR 0xde
--
--static unsigned short normal_i2c[] = {
-- ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
--};
--I2C_CLIENT_INSMOD; /* defines addr_data */
--
--static int isl1208_attach_adapter(struct i2c_adapter *adapter);
--static int isl1208_detach_client(struct i2c_client *client);
--
--static struct i2c_driver isl1208_driver = {
-- .driver = {
-- .name = DRV_NAME,
-- },
-- .id = I2C_DRIVERID_ISL1208,
-- .attach_adapter = &isl1208_attach_adapter,
-- .detach_client = &isl1208_detach_client,
--};
-+static struct i2c_driver isl1208_driver;
-
- /* block read */
- static int
- isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
-- unsigned len)
-+ unsigned len)
- {
- u8 reg_addr[1] = { reg };
- struct i2c_msg msgs[2] = {
-- { client->addr, client->flags, sizeof(reg_addr), reg_addr },
-- { client->addr, client->flags | I2C_M_RD, len, buf }
-+ {client->addr, client->flags, sizeof(reg_addr), reg_addr}
-+ ,
-+ {client->addr, client->flags | I2C_M_RD, len, buf}
- };
- int ret;
-
-@@ -103,15 +85,14 @@ isl1208_i2c_read_regs(struct i2c_client
- /* block write */
- static int
- isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
-- unsigned len)
-+ unsigned len)
- {
- u8 i2c_buf[ISL1208_REG_USR2 + 2];
- struct i2c_msg msgs[1] = {
-- { client->addr, client->flags, len + 1, i2c_buf }
-+ {client->addr, client->flags, len + 1, i2c_buf}
- };
- int ret;
-
-- BUG_ON(len == 0);
- BUG_ON(reg > ISL1208_REG_USR2);
- BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
-
-@@ -125,7 +106,8 @@ isl1208_i2c_set_regs(struct i2c_client *
- }
-
- /* simple check to see wether we have a isl1208 */
--static int isl1208_i2c_validate_client(struct i2c_client *client)
-+static int
-+isl1208_i2c_validate_client(struct i2c_client *client)
- {
- u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
- u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
-@@ -139,24 +121,29 @@ static int isl1208_i2c_validate_client(s
- return ret;
-
- for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
-- if (regs[i] & zero_mask[i]) /* check if bits are cleared */
-+ if (regs[i] & zero_mask[i]) /* check if bits are cleared */
- return -ENODEV;
- }
-
- return 0;
- }
-
--static int isl1208_i2c_get_sr(struct i2c_client *client)
-+static int
-+isl1208_i2c_get_sr(struct i2c_client *client)
- {
-- return i2c_smbus_read_byte_data(client, ISL1208_REG_SR) == -1 ? -EIO:0;
-+ int sr = i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
-+ if (sr < 0)
-+ return -EIO;
-+
-+ return sr;
- }
-
--static int isl1208_i2c_get_atr(struct i2c_client *client)
-+static int
-+isl1208_i2c_get_atr(struct i2c_client *client)
- {
- int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
--
- if (atr < 0)
-- return -EIO;
-+ return atr;
-
- /* The 6bit value in the ATR register controls the load
- * capacitance C_load * in steps of 0.25pF
-@@ -169,51 +156,54 @@ static int isl1208_i2c_get_atr(struct i2
- *
- */
-
-- atr &= 0x3f; /* mask out lsb */
-- atr ^= 1<<5; /* invert 6th bit */
-- atr += 2*9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
-+ atr &= 0x3f; /* mask out lsb */
-+ atr ^= 1 << 5; /* invert 6th bit */
-+ atr += 2 * 9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
-
- return atr;
- }
-
--static int isl1208_i2c_get_dtr(struct i2c_client *client)
-+static int
-+isl1208_i2c_get_dtr(struct i2c_client *client)
- {
- int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
--
- if (dtr < 0)
- return -EIO;
-
- /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
-- dtr = ((dtr & 0x3) * 20) * (dtr & (1<<2) ? -1 : 1);
-+ dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
-
- return dtr;
- }
-
--static int isl1208_i2c_get_usr(struct i2c_client *client)
-+static int
-+isl1208_i2c_get_usr(struct i2c_client *client)
- {
- u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
- int ret;
-
-- ret = isl1208_i2c_read_regs (client, ISL1208_REG_USR1, buf,
-- ISL1208_USR_SECTION_LEN);
-+ ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
-+ ISL1208_USR_SECTION_LEN);
- if (ret < 0)
- return ret;
-
- return (buf[1] << 8) | buf[0];
- }
-
--static int isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
-+static int
-+isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
- {
- u8 buf[ISL1208_USR_SECTION_LEN];
-
- buf[0] = usr & 0xff;
- buf[1] = (usr >> 8) & 0xff;
-
-- return isl1208_i2c_set_regs (client, ISL1208_REG_USR1, buf,
-- ISL1208_USR_SECTION_LEN);
-+ return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
-+ ISL1208_USR_SECTION_LEN);
- }
-
--static int isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
-+static int
-+isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
- {
- struct i2c_client *const client = to_i2c_client(dev);
- int sr, dtr, atr, usr;
-@@ -230,20 +220,19 @@ static int isl1208_rtc_proc(struct devic
- (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
- (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
- (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
-- (sr & ISL1208_REG_SR_ARST) ? " ARST" : "",
-- sr);
-+ (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
-
- seq_printf(seq, "batt_status\t: %s\n",
- (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
-
- dtr = isl1208_i2c_get_dtr(client);
-- if (dtr >= 0 -1)
-+ if (dtr >= 0 - 1)
- seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
-
- atr = isl1208_i2c_get_atr(client);
- if (atr >= 0)
- seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
-- atr>>2, (atr&0x3)*25);
-+ atr >> 2, (atr & 0x3) * 25);
-
- usr = isl1208_i2c_get_usr(client);
- if (usr >= 0)
-@@ -252,9 +241,8 @@ static int isl1208_rtc_proc(struct devic
- return 0;
- }
-
--
--static int isl1208_i2c_read_time(struct i2c_client *client,
-- struct rtc_time *tm)
-+static int
-+isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
- {
- int sr;
- u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
-@@ -274,27 +262,30 @@ static int isl1208_i2c_read_time(struct
-
- tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]);
- tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]);
-- { /* HR field has a more complex interpretation */
-+
-+ /* HR field has a more complex interpretation */
-+ {
- const u8 _hr = regs[ISL1208_REG_HR];
-- if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
-+ if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
- tm->tm_hour = BCD2BIN(_hr & 0x3f);
-- else { // 12h format
-+ else {
-+ /* 12h format */
- tm->tm_hour = BCD2BIN(_hr & 0x1f);
-- if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
-+ if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
- tm->tm_hour += 12;
- }
- }
-
- tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DT]);
-- tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
-+ tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
- tm->tm_year = BCD2BIN(regs[ISL1208_REG_YR]) + 100;
- tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DW]);
-
- return 0;
- }
-
--static int isl1208_i2c_read_alarm(struct i2c_client *client,
-- struct rtc_wkalrm *alarm)
-+static int
-+isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
- {
- struct rtc_time *const tm = &alarm->time;
- u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
-@@ -307,7 +298,7 @@ static int isl1208_i2c_read_alarm(struct
- }
-
- sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
-- ISL1208_ALARM_SECTION_LEN);
-+ ISL1208_ALARM_SECTION_LEN);
- if (sr < 0) {
- dev_err(&client->dev, "%s: reading alarm section failed\n",
- __func__);
-@@ -315,23 +306,25 @@ static int isl1208_i2c_read_alarm(struct
- }
-
- /* MSB of each alarm register is an enable bit */
-- tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SCA-ISL1208_REG_SCA] & 0x7f);
-- tm->tm_min = BCD2BIN(regs[ISL1208_REG_MNA-ISL1208_REG_SCA] & 0x7f);
-- tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA-ISL1208_REG_SCA] & 0x3f);
-- tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA-ISL1208_REG_SCA] & 0x3f);
-- tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MOA-ISL1208_REG_SCA] & 0x1f)-1;
-- tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA-ISL1208_REG_SCA] & 0x03);
-+ tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
-+ tm->tm_min = BCD2BIN(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
-+ tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
-+ tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
-+ tm->tm_mon =
-+ BCD2BIN(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
-+ tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
-
- return 0;
- }
-
--static int isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+static int
-+isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
- {
- return isl1208_i2c_read_time(to_i2c_client(dev), tm);
- }
-
--static int isl1208_i2c_set_time(struct i2c_client *client,
-- struct rtc_time const *tm)
-+static int
-+isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
- {
- int sr;
- u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
-@@ -353,7 +346,7 @@ static int isl1208_i2c_set_time(struct i
- }
-
- /* set WRTC */
-- sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
-+ sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
- sr | ISL1208_REG_SR_WRTC);
- if (sr < 0) {
- dev_err(&client->dev, "%s: writing SR failed\n", __func__);
-@@ -369,7 +362,7 @@ static int isl1208_i2c_set_time(struct i
- }
-
- /* clear WRTC again */
-- sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
-+ sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
- sr & ~ISL1208_REG_SR_WRTC);
- if (sr < 0) {
- dev_err(&client->dev, "%s: writing SR failed\n", __func__);
-@@ -380,70 +373,69 @@ static int isl1208_i2c_set_time(struct i
- }
-
-
--static int isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+static int
-+isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
- {
- return isl1208_i2c_set_time(to_i2c_client(dev), tm);
- }
-
--static int isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
-+static int
-+isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
- {
- return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
- }
-
- static const struct rtc_class_ops isl1208_rtc_ops = {
-- .proc = isl1208_rtc_proc,
-- .read_time = isl1208_rtc_read_time,
-- .set_time = isl1208_rtc_set_time,
-- .read_alarm = isl1208_rtc_read_alarm,
-- //.set_alarm = isl1208_rtc_set_alarm,
-+ .proc = isl1208_rtc_proc,
-+ .read_time = isl1208_rtc_read_time,
-+ .set_time = isl1208_rtc_set_time,
-+ .read_alarm = isl1208_rtc_read_alarm,
-+ /*.set_alarm = isl1208_rtc_set_alarm, */
- };
-
- /* sysfs interface */
-
--static ssize_t isl1208_sysfs_show_atrim(struct device *dev,
-- struct device_attribute *attr,
-- char *buf)
-+static ssize_t
-+isl1208_sysfs_show_atrim(struct device *dev,
-+ struct device_attribute *attr, char *buf)
- {
-- int atr;
--
-- atr = isl1208_i2c_get_atr(to_i2c_client(dev));
-+ int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
- if (atr < 0)
- return atr;
-
-- return sprintf(buf, "%d.%.2d pF\n", atr>>2, (atr&0x3)*25);
-+ return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
- }
-+
- static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
-
--static ssize_t isl1208_sysfs_show_dtrim(struct device *dev,
-- struct device_attribute *attr,
-- char *buf)
-+static ssize_t
-+isl1208_sysfs_show_dtrim(struct device *dev,
-+ struct device_attribute *attr, char *buf)
- {
-- int dtr;
--
-- dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
-+ int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
- if (dtr < 0)
- return dtr;
-
- return sprintf(buf, "%d ppm\n", dtr);
- }
-+
- static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
-
--static ssize_t isl1208_sysfs_show_usr(struct device *dev,
-- struct device_attribute *attr,
-- char *buf)
-+static ssize_t
-+isl1208_sysfs_show_usr(struct device *dev,
-+ struct device_attribute *attr, char *buf)
- {
-- int usr;
--
-- usr = isl1208_i2c_get_usr(to_i2c_client(dev));
-+ int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
- if (usr < 0)
- return usr;
-
- return sprintf(buf, "0x%.4x\n", usr);
- }
-
--static ssize_t isl1208_sysfs_store_usr(struct device *dev,
-- struct device_attribute *attr,
-- const char *buf, size_t count)
-+static ssize_t
-+isl1208_sysfs_store_usr(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
- {
- int usr = -1;
-
-@@ -460,124 +452,116 @@ static ssize_t isl1208_sysfs_store_usr(s
-
- return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
- }
-+
- static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
- isl1208_sysfs_store_usr);
-
- static int
--isl1208_probe(struct i2c_adapter *adapter, int addr, int kind)
-+isl1208_sysfs_register(struct device *dev)
- {
-- int rc = 0;
-- struct i2c_client *new_client = NULL;
-- struct rtc_device *rtc = NULL;
-+ int err;
-+
-+ err = device_create_file(dev, &dev_attr_atrim);
-+ if (err)
-+ return err;
-
-- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-- rc = -ENODEV;
-- goto failout;
-+ err = device_create_file(dev, &dev_attr_dtrim);
-+ if (err) {
-+ device_remove_file(dev, &dev_attr_atrim);
-+ return err;
- }
-
-- new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-- if (new_client == NULL) {
-- rc = -ENOMEM;
-- goto failout;
-+ err = device_create_file(dev, &dev_attr_usr);
-+ if (err) {
-+ device_remove_file(dev, &dev_attr_atrim);
-+ device_remove_file(dev, &dev_attr_dtrim);
- }
-
-- new_client->addr = addr;
-- new_client->adapter = adapter;
-- new_client->driver = &isl1208_driver;
-- new_client->flags = 0;
-- strcpy(new_client->name, DRV_NAME);
-+ return 0;
-+}
-
-- if (kind < 0) {
-- rc = isl1208_i2c_validate_client(new_client);
-- if (rc < 0)
-- goto failout;
-- }
-+static int
-+isl1208_sysfs_unregister(struct device *dev)
-+{
-+ device_remove_file(dev, &dev_attr_atrim);
-+ device_remove_file(dev, &dev_attr_atrim);
-+ device_remove_file(dev, &dev_attr_usr);
-+
-+ return 0;
-+}
-+
-+static int
-+isl1208_probe(struct i2c_client *client)
-+{
-+ int rc = 0;
-+ struct rtc_device *rtc;
-
-- rc = i2c_attach_client(new_client);
-- if (rc < 0)
-- goto failout;
-+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-+ return -ENODEV;
-
-- dev_info(&new_client->dev,
-+ if (isl1208_i2c_validate_client(client) < 0)
-+ return -ENODEV;
-+
-+ dev_info(&client->dev,
- "chip found, driver version " DRV_VERSION "\n");
-
- rtc = rtc_device_register(isl1208_driver.driver.name,
-- &new_client->dev,
-- &isl1208_rtc_ops, THIS_MODULE);
--
-- if (IS_ERR(rtc)) {
-- rc = PTR_ERR(rtc);
-- goto failout_detach;
-- }
-+ &client->dev, &isl1208_rtc_ops,
-+ THIS_MODULE);
-+ if (IS_ERR(rtc))
-+ return PTR_ERR(rtc);
-
-- i2c_set_clientdata(new_client, rtc);
-+ i2c_set_clientdata(client, rtc);
-
-- rc = isl1208_i2c_get_sr(new_client);
-+ rc = isl1208_i2c_get_sr(client);
- if (rc < 0) {
-- dev_err(&new_client->dev, "reading status failed\n");
-- goto failout_unregister;
-+ dev_err(&client->dev, "reading status failed\n");
-+ goto exit_unregister;
- }
-
- if (rc & ISL1208_REG_SR_RTCF)
-- dev_warn(&new_client->dev, "rtc power failure detected, "
-+ dev_warn(&client->dev, "rtc power failure detected, "
- "please set clock.\n");
-
-- rc = device_create_file(&new_client->dev, &dev_attr_atrim);
-- if (rc < 0)
-- goto failout_unregister;
-- rc = device_create_file(&new_client->dev, &dev_attr_dtrim);
-- if (rc < 0)
-- goto failout_atrim;
-- rc = device_create_file(&new_client->dev, &dev_attr_usr);
-- if (rc < 0)
-- goto failout_dtrim;
-+ rc = isl1208_sysfs_register(&client->dev);
-+ if (rc)
-+ goto exit_unregister;
-
- return 0;
-
-- failout_dtrim:
-- device_remove_file(&new_client->dev, &dev_attr_dtrim);
-- failout_atrim:
-- device_remove_file(&new_client->dev, &dev_attr_atrim);
-- failout_unregister:
-+ exit_unregister:
- rtc_device_unregister(rtc);
-- failout_detach:
-- i2c_detach_client(new_client);
-- failout:
-- kfree(new_client);
-- return rc;
--}
-
--static int
--isl1208_attach_adapter (struct i2c_adapter *adapter)
--{
-- return i2c_probe(adapter, &addr_data, isl1208_probe);
-+ return rc;
- }
-
- static int
--isl1208_detach_client(struct i2c_client *client)
-+isl1208_remove(struct i2c_client *client)
- {
-- int rc;
-- struct rtc_device *const rtc = i2c_get_clientdata(client);
--
-- if (rtc)
-- rtc_device_unregister(rtc); /* do we need to kfree? */
--
-- rc = i2c_detach_client(client);
-- if (rc)
-- return rc;
-+ struct rtc_device *rtc = i2c_get_clientdata(client);
-
-- kfree(client);
-+ isl1208_sysfs_unregister(&client->dev);
-+ rtc_device_unregister(rtc);
-
- return 0;
- }
-
--/* module management */
-+static struct i2c_driver isl1208_driver = {
-+ .driver = {
-+ .name = "rtc-isl1208",
-+ },
-+ .probe = isl1208_probe,
-+ .remove = isl1208_remove,
-+};
-
--static int __init isl1208_init(void)
-+static int __init
-+isl1208_init(void)
- {
- return i2c_add_driver(&isl1208_driver);
- }
-
--static void __exit isl1208_exit(void)
-+static void __exit
-+isl1208_exit(void)
- {
- i2c_del_driver(&isl1208_driver);
- }
-Index: linux-2.6.24.7/drivers/rtc/rtc-pcf8563.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/rtc/rtc-pcf8563.c
-+++ linux-2.6.24.7/drivers/rtc/rtc-pcf8563.c
-@@ -18,17 +18,7 @@
- #include <linux/bcd.h>
- #include <linux/rtc.h>
-
--#define DRV_VERSION "0.4.2"
--
--/* Addresses to scan: none
-- * This chip cannot be reliably autodetected. An empty eeprom
-- * located at 0x51 will pass the validation routine due to
-- * the way the registers are implemented.
-- */
--static unsigned short normal_i2c[] = { I2C_CLIENT_END };
--
--/* Module parameters */
--I2C_CLIENT_INSMOD;
-+#define DRV_VERSION "0.4.3"
-
- #define PCF8563_REG_ST1 0x00 /* status */
- #define PCF8563_REG_ST2 0x01
-@@ -53,8 +43,10 @@ I2C_CLIENT_INSMOD;
- #define PCF8563_SC_LV 0x80 /* low voltage */
- #define PCF8563_MO_C 0x80 /* century */
-
-+static struct i2c_driver pcf8563_driver;
-+
- struct pcf8563 {
-- struct i2c_client client;
-+ struct rtc_device *rtc;
- /*
- * The meaning of MO_C bit varies by the chip type.
- * From PCF8563 datasheet: this bit is toggled when the years
-@@ -72,16 +64,13 @@ struct pcf8563 {
- int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
- };
-
--static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
--static int pcf8563_detach(struct i2c_client *client);
--
- /*
- * In the routines that deal directly with the pcf8563 hardware, we use
- * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
- */
- static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
- {
-- struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
-+ struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
- unsigned char buf[13] = { PCF8563_REG_ST1 };
-
- struct i2c_msg msgs[] = {
-@@ -138,7 +127,7 @@ static int pcf8563_get_datetime(struct i
-
- static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
- {
-- struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
-+ struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
- int i, err;
- unsigned char buf[9];
-
-@@ -257,100 +246,66 @@ static const struct rtc_class_ops pcf856
- .set_time = pcf8563_rtc_set_time,
- };
-
--static int pcf8563_attach(struct i2c_adapter *adapter)
--{
-- return i2c_probe(adapter, &addr_data, pcf8563_probe);
--}
--
--static struct i2c_driver pcf8563_driver = {
-- .driver = {
-- .name = "pcf8563",
-- },
-- .id = I2C_DRIVERID_PCF8563,
-- .attach_adapter = &pcf8563_attach,
-- .detach_client = &pcf8563_detach,
--};
--
--static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
-+static int pcf8563_probe(struct i2c_client *client)
- {
- struct pcf8563 *pcf8563;
-- struct i2c_client *client;
-- struct rtc_device *rtc;
-
- int err = 0;
-
-- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-
-- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-- err = -ENODEV;
-- goto exit;
-- }
-+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-+ return -ENODEV;
-
-- if (!(pcf8563 = kzalloc(sizeof(struct pcf8563), GFP_KERNEL))) {
-- err = -ENOMEM;
-- goto exit;
-- }
--
-- client = &pcf8563->client;
-- client->addr = address;
-- client->driver = &pcf8563_driver;
-- client->adapter = adapter;
--
-- strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE);
-+ if (!(pcf8563 = kzalloc(sizeof(struct pcf8563), GFP_KERNEL)))
-+ return -ENOMEM;
-
- /* Verify the chip is really an PCF8563 */
-- if (kind < 0) {
-- if (pcf8563_validate_client(client) < 0) {
-- err = -ENODEV;
-- goto exit_kfree;
-- }
-- }
--
-- /* Inform the i2c layer */
-- if ((err = i2c_attach_client(client)))
-+ if (pcf8563_validate_client(client) < 0) {
-+ err = -ENODEV;
- goto exit_kfree;
-+ }
-
- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-
-- rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
-+ pcf8563->rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
- &pcf8563_rtc_ops, THIS_MODULE);
-
-- if (IS_ERR(rtc)) {
-- err = PTR_ERR(rtc);
-- goto exit_detach;
-+ if (IS_ERR(pcf8563->rtc)) {
-+ err = PTR_ERR(pcf8563->rtc);
-+ goto exit_kfree;
- }
-
-- i2c_set_clientdata(client, rtc);
-+ i2c_set_clientdata(client, pcf8563);
-
- return 0;
-
--exit_detach:
-- i2c_detach_client(client);
--
- exit_kfree:
- kfree(pcf8563);
-
--exit:
- return err;
- }
-
--static int pcf8563_detach(struct i2c_client *client)
-+static int pcf8563_remove(struct i2c_client *client)
- {
-- struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
-- int err;
-- struct rtc_device *rtc = i2c_get_clientdata(client);
-+ struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
-
-- if (rtc)
-- rtc_device_unregister(rtc);
--
-- if ((err = i2c_detach_client(client)))
-- return err;
-+ if (pcf8563->rtc)
-+ rtc_device_unregister(pcf8563->rtc);
-
- kfree(pcf8563);
-
- return 0;
- }
-
-+static struct i2c_driver pcf8563_driver = {
-+ .driver = {
-+ .name = "rtc-pcf8563",
-+ },
-+ .probe = pcf8563_probe,
-+ .remove = pcf8563_remove,
-+};
-+
- static int __init pcf8563_init(void)
- {
- return i2c_add_driver(&pcf8563_driver);
-Index: linux-2.6.24.7/drivers/rtc/rtc-x1205.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/rtc/rtc-x1205.c
-+++ linux-2.6.24.7/drivers/rtc/rtc-x1205.c
-@@ -22,20 +22,7 @@
- #include <linux/rtc.h>
- #include <linux/delay.h>
-
--#define DRV_VERSION "1.0.7"
--
--/* Addresses to scan: none. This chip is located at
-- * 0x6f and uses a two bytes register addressing.
-- * Two bytes need to be written to read a single register,
-- * while most other chips just require one and take the second
-- * one as the data to be written. To prevent corrupting
-- * unknown chips, the user must explicitly set the probe parameter.
-- */
--
--static unsigned short normal_i2c[] = { I2C_CLIENT_END };
--
--/* Insmod parameters */
--I2C_CLIENT_INSMOD;
-+#define DRV_VERSION "1.0.8"
-
- /* offsets into CCR area */
-
-@@ -91,19 +78,7 @@ I2C_CLIENT_INSMOD;
-
- #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
-
--/* Prototypes */
--static int x1205_attach(struct i2c_adapter *adapter);
--static int x1205_detach(struct i2c_client *client);
--static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
--
--static struct i2c_driver x1205_driver = {
-- .driver = {
-- .name = "x1205",
-- },
-- .id = I2C_DRIVERID_X1205,
-- .attach_adapter = &x1205_attach,
-- .detach_client = &x1205_detach,
--};
-+static struct i2c_driver x1205_driver;
-
- /*
- * In the routines that deal directly with the x1205 hardware, we use
-@@ -497,58 +472,51 @@ static ssize_t x1205_sysfs_show_dtrim(st
- }
- static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
-
--static int x1205_attach(struct i2c_adapter *adapter)
-+static int x1205_sysfs_register(struct device *dev)
-+{
-+ int err;
-+
-+ err = device_create_file(dev, &dev_attr_atrim);
-+ if (err)
-+ return err;
-+
-+ err = device_create_file(dev, &dev_attr_dtrim);
-+ if (err)
-+ device_remove_file(dev, &dev_attr_atrim);
-+
-+ return err;
-+}
-+
-+static void x1205_sysfs_unregister(struct device *dev)
- {
-- return i2c_probe(adapter, &addr_data, x1205_probe);
-+ device_remove_file(dev, &dev_attr_atrim);
-+ device_remove_file(dev, &dev_attr_dtrim);
- }
-
--static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-+
-+static int x1205_probe(struct i2c_client *client)
- {
- int err = 0;
- unsigned char sr;
-- struct i2c_client *client;
- struct rtc_device *rtc;
-
-- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-
-- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-- err = -ENODEV;
-- goto exit;
-+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-+ return -ENODEV;
- }
-
-- if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-- err = -ENOMEM;
-- goto exit;
-+ if (x1205_validate_client(client) < 0) {
-+ return -ENODEV;
- }
-
-- /* I2C client */
-- client->addr = address;
-- client->driver = &x1205_driver;
-- client->adapter = adapter;
--
-- strlcpy(client->name, x1205_driver.driver.name, I2C_NAME_SIZE);
--
-- /* Verify the chip is really an X1205 */
-- if (kind < 0) {
-- if (x1205_validate_client(client) < 0) {
-- err = -ENODEV;
-- goto exit_kfree;
-- }
-- }
--
-- /* Inform the i2c layer */
-- if ((err = i2c_attach_client(client)))
-- goto exit_kfree;
--
- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-
- rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
- &x1205_rtc_ops, THIS_MODULE);
-
-- if (IS_ERR(rtc)) {
-- err = PTR_ERR(rtc);
-- goto exit_detach;
-- }
-+ if (IS_ERR(rtc))
-+ return PTR_ERR(rtc);
-
- i2c_set_clientdata(client, rtc);
-
-@@ -565,45 +533,35 @@ static int x1205_probe(struct i2c_adapte
- else
- dev_err(&client->dev, "couldn't read status\n");
-
-- err = device_create_file(&client->dev, &dev_attr_atrim);
-- if (err) goto exit_devreg;
-- err = device_create_file(&client->dev, &dev_attr_dtrim);
-- if (err) goto exit_atrim;
-+ err = x1205_sysfs_register(&client->dev);
-+ if (err)
-+ goto exit_devreg;
-
- return 0;
-
--exit_atrim:
-- device_remove_file(&client->dev, &dev_attr_atrim);
--
- exit_devreg:
- rtc_device_unregister(rtc);
-
--exit_detach:
-- i2c_detach_client(client);
--
--exit_kfree:
-- kfree(client);
--
--exit:
- return err;
- }
-
--static int x1205_detach(struct i2c_client *client)
-+static int x1205_remove(struct i2c_client *client)
- {
-- int err;
- struct rtc_device *rtc = i2c_get_clientdata(client);
-
-- if (rtc)
-- rtc_device_unregister(rtc);
--
-- if ((err = i2c_detach_client(client)))
-- return err;
--
-- kfree(client);
--
-+ rtc_device_unregister(rtc);
-+ x1205_sysfs_unregister(&client->dev);
- return 0;
- }
-
-+static struct i2c_driver x1205_driver = {
-+ .driver = {
-+ .name = "rtc-x1205",
-+ },
-+ .probe = x1205_probe,
-+ .remove = x1205_remove,
-+};
-+
- static int __init x1205_init(void)
- {
- return i2c_add_driver(&x1205_driver);
diff --git a/target/linux/ixp4xx/patches-2.6.24/014_ixp4xx_i2c_gpio.patch b/target/linux/ixp4xx/patches-2.6.24/014_ixp4xx_i2c_gpio.patch
deleted file mode 100644
index 98eb72adb4..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/014_ixp4xx_i2c_gpio.patch
+++ /dev/null
@@ -1,232 +0,0 @@
-Migrate all ixp4xx devices to the bitbanging I2C bus driver utilizing
-the arch-neutral GPIO API (linux/i2c-gpio.h).
-
-Tested by the nslu2-linux and openwrt projects in public firmware releases.
-
-Acked-by: Rod Whitby <rod@whitby.id.au>
-Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -41,7 +42,7 @@ static struct platform_device nslu2_flas
- .resource = &nslu2_flash_resource,
- };
-
--static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
- .sda_pin = NSLU2_SDA_PIN,
- .scl_pin = NSLU2_SCL_PIN,
- };
-@@ -82,11 +83,12 @@ static struct platform_device nslu2_leds
- };
- #endif
-
--static struct platform_device nslu2_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device nslu2_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev.platform_data = &nslu2_i2c_gpio_pins,
-- .num_resources = 0,
-+ .dev = {
-+ .platform_data = &nslu2_i2c_gpio_data,
-+ },
- };
-
- static struct platform_device nslu2_beeper = {
-@@ -139,7 +141,7 @@ static struct platform_device nslu2_uart
- };
-
- static struct platform_device *nslu2_devices[] __initdata = {
-- &nslu2_i2c_controller,
-+ &nslu2_i2c_gpio,
- &nslu2_flash,
- &nslu2_beeper,
- #ifdef CONFIG_LEDS_IXP4XX
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -16,6 +16,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -68,16 +69,17 @@ static struct platform_device nas100d_le
- };
- #endif
-
--static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
- .sda_pin = NAS100D_SDA_PIN,
- .scl_pin = NAS100D_SCL_PIN,
- };
-
--static struct platform_device nas100d_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device nas100d_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev.platform_data = &nas100d_i2c_gpio_pins,
-- .num_resources = 0,
-+ .dev = {
-+ .platform_data = &nas100d_i2c_gpio_data,
-+ },
- };
-
- static struct resource nas100d_uart_resources[] = {
-@@ -124,7 +126,7 @@ static struct platform_device nas100d_ua
- };
-
- static struct platform_device *nas100d_devices[] __initdata = {
-- &nas100d_i2c_controller,
-+ &nas100d_i2c_gpio,
- &nas100d_flash,
- #ifdef CONFIG_LEDS_IXP4XX
- &nas100d_leds,
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/i2c-gpio.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -47,18 +48,17 @@ static struct platform_device avila_flas
- .resource = &avila_flash_resource,
- };
-
--static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data avila_i2c_gpio_data = {
- .sda_pin = AVILA_SDA_PIN,
- .scl_pin = AVILA_SCL_PIN,
- };
-
--static struct platform_device avila_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device avila_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev = {
-- .platform_data = &avila_i2c_gpio_pins,
-+ .dev = {
-+ .platform_data = &avila_i2c_gpio_data,
- },
-- .num_resources = 0
- };
-
- static struct resource avila_uart_resources[] = {
-@@ -133,7 +133,7 @@ static struct platform_device avila_pata
- };
-
- static struct platform_device *avila_devices[] __initdata = {
-- &avila_i2c_controller,
-+ &avila_i2c_gpio,
- &avila_flash,
- &avila_uart
- };
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -14,6 +14,7 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -37,15 +38,17 @@ static struct platform_device dsmg600_fl
- .resource = &dsmg600_flash_resource,
- };
-
--static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
- .sda_pin = DSMG600_SDA_PIN,
- .scl_pin = DSMG600_SCL_PIN,
- };
-
--static struct platform_device dsmg600_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device dsmg600_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev.platform_data = &dsmg600_i2c_gpio_pins,
-+ .dev = {
-+ .platform_data = &dsmg600_i2c_gpio_data,
-+ },
- };
-
- #ifdef CONFIG_LEDS_CLASS
-@@ -116,7 +119,7 @@ static struct platform_device dsmg600_ua
- };
-
- static struct platform_device *dsmg600_devices[] __initdata = {
-- &dsmg600_i2c_controller,
-+ &dsmg600_i2c_gpio,
- &dsmg600_flash,
- };
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -15,6 +15,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/i2c-gpio.h>
- #include <linux/io.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/nand.h>
-@@ -120,18 +121,17 @@ static struct platform_device ixdp425_fl
- };
- #endif /* CONFIG_MTD_NAND_PLATFORM */
-
--static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
-+static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
- .sda_pin = IXDP425_SDA_PIN,
- .scl_pin = IXDP425_SCL_PIN,
- };
-
--static struct platform_device ixdp425_i2c_controller = {
-- .name = "IXP4XX-I2C",
-+static struct platform_device ixdp425_i2c_gpio = {
-+ .name = "i2c-gpio",
- .id = 0,
-- .dev = {
-- .platform_data = &ixdp425_i2c_gpio_pins,
-+ .dev = {
-+ .platform_data = &ixdp425_i2c_gpio_data,
- },
-- .num_resources = 0
- };
-
- static struct resource ixdp425_uart_resources[] = {
-@@ -178,7 +178,7 @@ static struct platform_device ixdp425_ua
- };
-
- static struct platform_device *ixdp425_devices[] __initdata = {
-- &ixdp425_i2c_controller,
-+ &ixdp425_i2c_gpio,
- &ixdp425_flash,
- #if defined(CONFIG_MTD_NAND_PLATFORM) || \
- defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
diff --git a/target/linux/ixp4xx/patches-2.6.24/015-ixp4xx_update_defconfig.patch b/target/linux/ixp4xx/patches-2.6.24/015-ixp4xx_update_defconfig.patch
deleted file mode 100644
index 21f6964698..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/015-ixp4xx_update_defconfig.patch
+++ /dev/null
@@ -1,1724 +0,0 @@
-From 9882d8cedd79d23e939fa5f6017253f63fc97821 Mon Sep 17 00:00:00 2001
-From: Rod Whitby <rod@whitby.id.au>
-Date: Tue, 29 Jan 2008 09:41:10 +1030
-Subject: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards (Patch #4766)
-
-This updates the defconfig for the ixp4xx machine in arch/arm/config
-taking all the defaults, with the following additions:
-
-1) Enable support for the nslu2, loft, gateway7001, wg302v2,
- dsmg600, and gtwx5715 boards.
-2) Enable EABI, OABI, HOTPLUG and FW_LOADER.
-3) Enable the RTC subsystem, with drivers for the RTC chips on the
- nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards.
-4) Enable the LEDS subsystem to support the nslu2, nas100d and
- dsmg600 boards. Enable the ixp4xx beeper driver.
-5) Enable the USB subsystem, USB host driver support and USB mass
- storage support (required for boot disk on nslu2 board).
-6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600
- (pata_artop) and avila (ixp4xx_cf) boards.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
-
-PATCH FOLLOWS
-KernelVersion: 2.6.24-git5
-
-Index: linux-2.6.24.7/arch/arm/configs/ixp4xx_defconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/configs/ixp4xx_defconfig
-+++ linux-2.6.24.7/arch/arm/configs/ixp4xx_defconfig
-@@ -1,69 +1,96 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.15
--# Tue Jan 3 03:20:40 2006
-+# Linux kernel version: 2.6.24-rc8
-+# Wed Jan 23 17:26:16 2008
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
- CONFIG_MMU=y
--CONFIG_UID16=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
--CONFIG_CLEAN_COMPILE=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION=""
- CONFIG_LOCALVERSION_AUTO=y
- CONFIG_SWAP=y
- CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- CONFIG_BSD_PROCESS_ACCT=y
- # CONFIG_BSD_PROCESS_ACCT_V3 is not set
--CONFIG_SYSCTL=y
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_USER_NS is not set
-+# CONFIG_PID_NS is not set
- # CONFIG_AUDIT is not set
--# CONFIG_HOTPLUG is not set
--CONFIG_KOBJECT_UEVENT=y
- # CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_FAIR_GROUP_SCHED=y
-+CONFIG_FAIR_USER_SCHED=y
-+# CONFIG_FAIR_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
- CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
- CONFIG_KALLSYMS=y
- # CONFIG_KALLSYMS_ALL is not set
- # CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
--CONFIG_CC_ALIGN_FUNCTIONS=0
--CONFIG_CC_ALIGN_LABELS=0
--CONFIG_CC_ALIGN_LOOPS=0
--CONFIG_CC_ALIGN_JUMPS=0
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
-+# CONFIG_SLOB is not set
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- # CONFIG_MODULE_UNLOAD is not set
--CONFIG_OBSOLETE_MODPARM=y
- CONFIG_MODVERSIONS=y
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
--
--#
--# Block layer
--#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -81,28 +108,39 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
- #
- # System Type
- #
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_AT91 is not set
- # CONFIG_ARCH_CLPS7500 is not set
- # CONFIG_ARCH_CLPS711X is not set
- # CONFIG_ARCH_CO285 is not set
- # CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
- # CONFIG_ARCH_FOOTBRIDGE is not set
--# CONFIG_ARCH_INTEGRATOR is not set
--# CONFIG_ARCH_IOP3XX is not set
--CONFIG_ARCH_IXP4XX=y
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_IXP2000 is not set
-+CONFIG_ARCH_IXP4XX=y
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
- # CONFIG_ARCH_SA1100 is not set
- # CONFIG_ARCH_S3C2410 is not set
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
- # CONFIG_ARCH_OMAP is not set
--# CONFIG_ARCH_VERSATILE is not set
--# CONFIG_ARCH_REALVIEW is not set
--# CONFIG_ARCH_IMX is not set
--# CONFIG_ARCH_H720X is not set
--# CONFIG_ARCH_AAEC2000 is not set
- CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
- #
-@@ -112,8 +150,12 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
- #
- # IXP4xx Platforms
- #
--CONFIG_ARCH_AVILA=y
-+CONFIG_MACH_NSLU2=y
-+CONFIG_MACH_AVILA=y
-+CONFIG_MACH_LOFT=y
- CONFIG_ARCH_ADI_COYOTE=y
-+CONFIG_MACH_GATEWAY7001=y
-+CONFIG_MACH_WG302V2=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
- CONFIG_MACH_IXDP465=y
-@@ -121,17 +163,27 @@ CONFIG_MACH_KIXRP435=y
- CONFIG_ARCH_IXCDP1100=y
- CONFIG_ARCH_PRPMC1100=y
- CONFIG_MACH_NAS100D=y
-+CONFIG_MACH_DSMG600=y
- CONFIG_ARCH_IXDP4XX=y
- CONFIG_CPU_IXP46X=y
- CONFIG_CPU_IXP43X=y
--# CONFIG_MACH_GTWX5715 is not set
-+CONFIG_MACH_GTWX5715=y
-
- #
- # IXP4xx Options
- #
-+CONFIG_DMABOUNCE=y
- # CONFIG_IXP4XX_INDIRECT_PCI is not set
-
- #
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
- # Processor Type
- #
- CONFIG_CPU_32=y
-@@ -140,33 +192,40 @@ CONFIG_CPU_32v5=y
- CONFIG_CPU_ABRT_EV5T=y
- CONFIG_CPU_CACHE_VIVT=y
- CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-
- #
- # Processor Features
- #
- # CONFIG_ARM_THUMB is not set
- CONFIG_CPU_BIG_ENDIAN=y
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_OUTER_CACHE is not set
-+# CONFIG_IWMMXT is not set
- CONFIG_XSCALE_PMU=y
--CONFIG_DMABOUNCE=y
-
- #
- # Bus support
- #
--CONFIG_ISA_DMA_API=y
- CONFIG_PCI=y
--CONFIG_PCI_LEGACY_PROC=y
-+CONFIG_PCI_SYSCALL=y
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+CONFIG_PCI_LEGACY=y
- # CONFIG_PCI_DEBUG is not set
--
--#
--# PCCARD (PCMCIA/CardBus) support
--#
- # CONFIG_PCCARD is not set
-
- #
- # Kernel Features
- #
-+# CONFIG_TICK_ONESHOT is not set
-+# CONFIG_NO_HZ is not set
-+# CONFIG_HIGH_RES_TIMERS is not set
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
- # CONFIG_PREEMPT is not set
--# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+CONFIG_AEABI=y
-+CONFIG_OABI_COMPAT=y
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
- CONFIG_SELECT_MEMORY_MODEL=y
- CONFIG_FLATMEM_MANUAL=y
-@@ -175,7 +234,12 @@ CONFIG_FLATMEM_MANUAL=y
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
- # CONFIG_SPARSEMEM_STATIC is not set
-+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
- CONFIG_ALIGNMENT_TRAP=y
-
- #
-@@ -185,6 +249,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -203,13 +268,12 @@ CONFIG_FPE_NWFPE=y
- CONFIG_BINFMT_ELF=y
- # CONFIG_BINFMT_AOUT is not set
- # CONFIG_BINFMT_MISC is not set
--# CONFIG_ARTHUR is not set
-
- #
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-
- #
- # Networking
-@@ -219,11 +283,13 @@ CONFIG_NET=y
- #
- # Networking options
- #
--CONFIG_PACKET=m
-+CONFIG_PACKET=y
- CONFIG_PACKET_MMAP=y
- CONFIG_UNIX=y
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
- # CONFIG_NET_KEY is not set
- CONFIG_INET=y
- CONFIG_IP_MULTICAST=y
-@@ -232,9 +298,7 @@ CONFIG_ASK_IP_FIB_HASH=y
- # CONFIG_IP_FIB_TRIE is not set
- CONFIG_IP_FIB_HASH=y
- CONFIG_IP_MULTIPLE_TABLES=y
--CONFIG_IP_ROUTE_FWMARK=y
- CONFIG_IP_ROUTE_MULTIPATH=y
--# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
- CONFIG_IP_ROUTE_VERBOSE=y
- CONFIG_IP_PNP=y
- CONFIG_IP_PNP_DHCP=y
-@@ -251,15 +315,18 @@ CONFIG_SYN_COOKIES=y
- # CONFIG_INET_AH is not set
- # CONFIG_INET_ESP is not set
- # CONFIG_INET_IPCOMP is not set
--CONFIG_INET_TUNNEL=m
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
- CONFIG_INET_DIAG=y
- CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
--CONFIG_TCP_CONG_BIC=y
--
--#
--# IP: Virtual Server Configuration
--#
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
- CONFIG_IP_VS=m
- CONFIG_IP_VS_DEBUG=y
- CONFIG_IP_VS_TAB_BITS=12
-@@ -290,6 +357,9 @@ CONFIG_IP_VS_SH=m
- # IPVS application helper
- #
- # CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
- CONFIG_NETFILTER=y
- # CONFIG_NETFILTER_DEBUG is not set
- CONFIG_BRIDGE_NETFILTER=y
-@@ -298,70 +368,57 @@ CONFIG_BRIDGE_NETFILTER=y
- # Core Netfilter Configuration
- #
- # CONFIG_NETFILTER_NETLINK is not set
-+# CONFIG_NF_CONNTRACK_ENABLED is not set
-+# CONFIG_NF_CONNTRACK is not set
-+CONFIG_NETFILTER_XTABLES=m
-+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
- #
- # IP: Netfilter Configuration
- #
--CONFIG_IP_NF_CONNTRACK=m
--# CONFIG_IP_NF_CT_ACCT is not set
--# CONFIG_IP_NF_CONNTRACK_MARK is not set
--# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
--# CONFIG_IP_NF_CT_PROTO_SCTP is not set
--CONFIG_IP_NF_FTP=m
--CONFIG_IP_NF_IRC=m
--# CONFIG_IP_NF_NETBIOS_NS is not set
--# CONFIG_IP_NF_TFTP is not set
--# CONFIG_IP_NF_AMANDA is not set
--# CONFIG_IP_NF_PPTP is not set
- CONFIG_IP_NF_QUEUE=m
- CONFIG_IP_NF_IPTABLES=m
--CONFIG_IP_NF_MATCH_LIMIT=m
- # CONFIG_IP_NF_MATCH_IPRANGE is not set
--CONFIG_IP_NF_MATCH_MAC=m
--# CONFIG_IP_NF_MATCH_PKTTYPE is not set
--CONFIG_IP_NF_MATCH_MARK=m
--CONFIG_IP_NF_MATCH_MULTIPORT=m
- CONFIG_IP_NF_MATCH_TOS=m
- # CONFIG_IP_NF_MATCH_RECENT is not set
- # CONFIG_IP_NF_MATCH_ECN is not set
--# CONFIG_IP_NF_MATCH_DSCP is not set
--CONFIG_IP_NF_MATCH_AH_ESP=m
--CONFIG_IP_NF_MATCH_LENGTH=m
-+# CONFIG_IP_NF_MATCH_AH is not set
- CONFIG_IP_NF_MATCH_TTL=m
--CONFIG_IP_NF_MATCH_TCPMSS=m
--# CONFIG_IP_NF_MATCH_HELPER is not set
--CONFIG_IP_NF_MATCH_STATE=m
--# CONFIG_IP_NF_MATCH_CONNTRACK is not set
- CONFIG_IP_NF_MATCH_OWNER=m
--# CONFIG_IP_NF_MATCH_PHYSDEV is not set
- # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
--# CONFIG_IP_NF_MATCH_REALM is not set
--# CONFIG_IP_NF_MATCH_SCTP is not set
--# CONFIG_IP_NF_MATCH_DCCP is not set
--# CONFIG_IP_NF_MATCH_COMMENT is not set
--# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
--# CONFIG_IP_NF_MATCH_STRING is not set
- CONFIG_IP_NF_FILTER=m
- CONFIG_IP_NF_TARGET_REJECT=m
- CONFIG_IP_NF_TARGET_LOG=m
- CONFIG_IP_NF_TARGET_ULOG=m
--CONFIG_IP_NF_TARGET_TCPMSS=m
--# CONFIG_IP_NF_TARGET_NFQUEUE is not set
--CONFIG_IP_NF_NAT=m
--CONFIG_IP_NF_NAT_NEEDED=y
--CONFIG_IP_NF_TARGET_MASQUERADE=m
--CONFIG_IP_NF_TARGET_REDIRECT=m
--# CONFIG_IP_NF_TARGET_NETMAP is not set
--# CONFIG_IP_NF_TARGET_SAME is not set
--CONFIG_IP_NF_NAT_SNMP_BASIC=m
--CONFIG_IP_NF_NAT_IRC=m
--CONFIG_IP_NF_NAT_FTP=m
- CONFIG_IP_NF_MANGLE=m
- CONFIG_IP_NF_TARGET_TOS=m
- # CONFIG_IP_NF_TARGET_ECN is not set
--# CONFIG_IP_NF_TARGET_DSCP is not set
--CONFIG_IP_NF_TARGET_MARK=m
--# CONFIG_IP_NF_TARGET_CLASSIFY is not set
- # CONFIG_IP_NF_TARGET_TTL is not set
- # CONFIG_IP_NF_RAW is not set
- CONFIG_IP_NF_ARPTABLES=m
-@@ -372,16 +429,9 @@ CONFIG_IP_NF_ARPFILTER=m
- # Bridge: Netfilter Configuration
- #
- # CONFIG_BRIDGE_NF_EBTABLES is not set
--
--#
--# DCCP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_DCCP is not set
--
--#
--# SCTP Configuration (EXPERIMENTAL)
--#
- # CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
- CONFIG_ATM=y
- CONFIG_ATM_CLIP=y
- # CONFIG_ATM_CLIP_NO_ICMP is not set
-@@ -397,25 +447,17 @@ CONFIG_LLC=m
- CONFIG_IPX=m
- # CONFIG_IPX_INTERN is not set
- CONFIG_ATALK=m
--CONFIG_DEV_APPLETALK=y
-+CONFIG_DEV_APPLETALK=m
- CONFIG_IPDDP=m
- CONFIG_IPDDP_ENCAP=y
- CONFIG_IPDDP_DECAP=y
- CONFIG_X25=m
- CONFIG_LAPB=m
--# CONFIG_NET_DIVERT is not set
- CONFIG_ECONET=m
- CONFIG_ECONET_AUNUDP=y
- CONFIG_ECONET_NATIVE=y
- CONFIG_WAN_ROUTER=m
--
--#
--# QoS and/or fair queueing
--#
- CONFIG_NET_SCHED=y
--CONFIG_NET_SCH_CLK_JIFFIES=y
--# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
--# CONFIG_NET_SCH_CLK_CPU is not set
-
- #
- # Queueing/Scheduling
-@@ -425,6 +467,7 @@ CONFIG_NET_SCH_HTB=m
- # CONFIG_NET_SCH_HFSC is not set
- # CONFIG_NET_SCH_ATM is not set
- CONFIG_NET_SCH_PRIO=m
-+# CONFIG_NET_SCH_RR is not set
- CONFIG_NET_SCH_RED=m
- CONFIG_NET_SCH_SFQ=m
- CONFIG_NET_SCH_TEQL=m
-@@ -449,10 +492,17 @@ CONFIG_NET_CLS_U32=m
- CONFIG_NET_CLS_RSVP=m
- CONFIG_NET_CLS_RSVP6=m
- # CONFIG_NET_EMATCH is not set
--# CONFIG_NET_CLS_ACT is not set
-+CONFIG_NET_CLS_ACT=y
-+CONFIG_NET_ACT_POLICE=y
-+# CONFIG_NET_ACT_GACT is not set
-+# CONFIG_NET_ACT_MIRRED is not set
-+# CONFIG_NET_ACT_IPT is not set
-+# CONFIG_NET_ACT_NAT is not set
-+# CONFIG_NET_ACT_PEDIT is not set
-+# CONFIG_NET_ACT_SIMP is not set
- CONFIG_NET_CLS_POLICE=y
- # CONFIG_NET_CLS_IND is not set
--CONFIG_NET_ESTIMATOR=y
-+CONFIG_NET_SCH_FIFO=y
-
- #
- # Network testing
-@@ -461,7 +511,18 @@ CONFIG_NET_PKTGEN=m
- # CONFIG_HAMRADIO is not set
- # CONFIG_IRDA is not set
- # CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+CONFIG_FIB_RULES=y
-+
-+#
-+# Wireless
-+#
-+# CONFIG_CFG80211 is not set
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
- # CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -470,19 +531,14 @@ CONFIG_NET_PKTGEN=m
- #
- # Generic Driver Options
- #
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
--# CONFIG_FW_LOADER is not set
-+CONFIG_FW_LOADER=y
- # CONFIG_DEBUG_DRIVER is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
- # CONFIG_CONNECTOR is not set
--
--#
--# Memory Technology Devices (MTD)
--#
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
- # CONFIG_MTD_CONCAT is not set
-@@ -498,11 +554,14 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
- # User Modules And Translation Layers
- #
- CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
- CONFIG_MTD_BLOCK=y
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
- # CONFIG_INFTL is not set
- # CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-
- #
- # RAM/ROM/Flash chip drivers
-@@ -528,7 +587,6 @@ CONFIG_MTD_CFI_UTIL=y
- # CONFIG_MTD_RAM is not set
- # CONFIG_MTD_ROM is not set
- # CONFIG_MTD_ABSENT is not set
--# CONFIG_MTD_XIP is not set
-
- #
- # Mapping drivers for chip access
-@@ -538,6 +596,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
- # CONFIG_MTD_ARM_INTEGRATOR is not set
- CONFIG_MTD_IXP4XX=y
- # CONFIG_MTD_PCI is not set
-+# CONFIG_MTD_INTEL_VR_NOR is not set
- # CONFIG_MTD_PLATRAM is not set
-
- #
-@@ -547,7 +606,6 @@ CONFIG_MTD_IXP4XX=y
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
--# CONFIG_MTD_BLKMTD is not set
- # CONFIG_MTD_BLOCK2MTD is not set
-
- #
-@@ -556,33 +614,24 @@ CONFIG_MTD_IXP4XX=y
- # CONFIG_MTD_DOC2000 is not set
- # CONFIG_MTD_DOC2001 is not set
- # CONFIG_MTD_DOC2001PLUS is not set
--
--#
--# NAND Flash Device Drivers
--#
- CONFIG_MTD_NAND=m
- # CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
- CONFIG_MTD_NAND_IDS=m
- # CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_CAFE is not set
- # CONFIG_MTD_NAND_NANDSIM is not set
--
--#
--# OneNAND Flash Device Drivers
--#
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
- # CONFIG_MTD_ONENAND is not set
-
- #
--# Parallel port support
-+# UBI - Unsorted block images
- #
-+# CONFIG_MTD_UBI is not set
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_CPQ_DA is not set
- # CONFIG_BLK_CPQ_CISS_DA is not set
- # CONFIG_BLK_DEV_DAC960 is not set
-@@ -592,17 +641,20 @@ CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
- # CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_SX8 is not set
-+# CONFIG_BLK_DEV_UB is not set
- CONFIG_BLK_DEV_RAM=y
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
--CONFIG_BLK_DEV_INITRD=y
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
--
--#
--# ATA/ATAPI/MFM/RLL support
--#
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_PHANTOM is not set
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
- CONFIG_IDE=y
-+CONFIG_IDE_MAX_HWIFS=4
- CONFIG_BLK_DEV_IDE=y
-
- #
-@@ -614,24 +666,28 @@ CONFIG_BLK_DEV_IDEDISK=y
- # CONFIG_BLK_DEV_IDECD is not set
- # CONFIG_BLK_DEV_IDETAPE is not set
- # CONFIG_BLK_DEV_IDEFLOPPY is not set
-+# CONFIG_BLK_DEV_IDESCSI is not set
- # CONFIG_IDE_TASK_IOCTL is not set
-+CONFIG_IDE_PROC_FS=y
-
- #
- # IDE chipset support/bugfixes
- #
- CONFIG_IDE_GENERIC=y
-+# CONFIG_BLK_DEV_PLATFORM is not set
-+
-+#
-+# PCI IDE chipsets support
-+#
- CONFIG_BLK_DEV_IDEPCI=y
- # CONFIG_IDEPCI_SHARE_IRQ is not set
-+CONFIG_IDEPCI_PCIBUS_ORDER=y
- # CONFIG_BLK_DEV_OFFBOARD is not set
- # CONFIG_BLK_DEV_GENERIC is not set
- # CONFIG_BLK_DEV_OPTI621 is not set
--# CONFIG_BLK_DEV_SL82C105 is not set
- CONFIG_BLK_DEV_IDEDMA_PCI=y
--# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
--# CONFIG_IDEDMA_PCI_AUTO is not set
- # CONFIG_BLK_DEV_AEC62XX is not set
- # CONFIG_BLK_DEV_ALI15X3 is not set
--# CONFIG_BLK_DEV_AMD74XX is not set
- CONFIG_BLK_DEV_CMD64X=y
- # CONFIG_BLK_DEV_TRIFLEX is not set
- # CONFIG_BLK_DEV_CY82C693 is not set
-@@ -639,93 +695,162 @@ CONFIG_BLK_DEV_CMD64X=y
- # CONFIG_BLK_DEV_CS5530 is not set
- # CONFIG_BLK_DEV_HPT34X is not set
- CONFIG_BLK_DEV_HPT366=y
-+# CONFIG_BLK_DEV_JMICRON is not set
- # CONFIG_BLK_DEV_SC1200 is not set
- # CONFIG_BLK_DEV_PIIX is not set
-+# CONFIG_BLK_DEV_IT8213 is not set
- # CONFIG_BLK_DEV_IT821X is not set
- # CONFIG_BLK_DEV_NS87415 is not set
- # CONFIG_BLK_DEV_PDC202XX_OLD is not set
- CONFIG_BLK_DEV_PDC202XX_NEW=y
--# CONFIG_PDC202XX_FORCE is not set
- # CONFIG_BLK_DEV_SVWKS is not set
- # CONFIG_BLK_DEV_SIIMAGE is not set
-+# CONFIG_BLK_DEV_SL82C105 is not set
- # CONFIG_BLK_DEV_SLC90E66 is not set
- # CONFIG_BLK_DEV_TRM290 is not set
- # CONFIG_BLK_DEV_VIA82CXXX is not set
-+# CONFIG_BLK_DEV_TC86C001 is not set
- # CONFIG_IDE_ARM is not set
- CONFIG_BLK_DEV_IDEDMA=y
--# CONFIG_IDEDMA_IVB is not set
--# CONFIG_IDEDMA_AUTO is not set
-+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
- # CONFIG_BLK_DEV_HD is not set
-
- #
- # SCSI device support
- #
- # CONFIG_RAID_ATTRS is not set
--# CONFIG_SCSI is not set
--
--#
--# Multi-device support (RAID and LVM)
--#
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+# CONFIG_SCSI_LOWLEVEL is not set
-+CONFIG_ATA=y
-+# CONFIG_ATA_NONSTANDARD is not set
-+# CONFIG_SATA_AHCI is not set
-+# CONFIG_SATA_SVW is not set
-+# CONFIG_ATA_PIIX is not set
-+# CONFIG_SATA_MV is not set
-+# CONFIG_SATA_NV is not set
-+# CONFIG_PDC_ADMA is not set
-+# CONFIG_SATA_QSTOR is not set
-+# CONFIG_SATA_PROMISE is not set
-+# CONFIG_SATA_SX4 is not set
-+# CONFIG_SATA_SIL is not set
-+# CONFIG_SATA_SIL24 is not set
-+# CONFIG_SATA_SIS is not set
-+# CONFIG_SATA_ULI is not set
-+# CONFIG_SATA_VIA is not set
-+# CONFIG_SATA_VITESSE is not set
-+# CONFIG_SATA_INIC162X is not set
-+# CONFIG_PATA_ALI is not set
-+# CONFIG_PATA_AMD is not set
-+CONFIG_PATA_ARTOP=y
-+# CONFIG_PATA_ATIIXP is not set
-+# CONFIG_PATA_CMD640_PCI is not set
-+# CONFIG_PATA_CMD64X is not set
-+# CONFIG_PATA_CS5520 is not set
-+# CONFIG_PATA_CS5530 is not set
-+# CONFIG_PATA_CYPRESS is not set
-+# CONFIG_PATA_EFAR is not set
-+# CONFIG_ATA_GENERIC is not set
-+# CONFIG_PATA_HPT366 is not set
-+# CONFIG_PATA_HPT37X is not set
-+# CONFIG_PATA_HPT3X2N is not set
-+# CONFIG_PATA_HPT3X3 is not set
-+# CONFIG_PATA_IT821X is not set
-+# CONFIG_PATA_IT8213 is not set
-+# CONFIG_PATA_JMICRON is not set
-+# CONFIG_PATA_TRIFLEX is not set
-+# CONFIG_PATA_MARVELL is not set
-+# CONFIG_PATA_MPIIX is not set
-+# CONFIG_PATA_OLDPIIX is not set
-+# CONFIG_PATA_NETCELL is not set
-+# CONFIG_PATA_NS87410 is not set
-+# CONFIG_PATA_NS87415 is not set
-+# CONFIG_PATA_OPTI is not set
-+# CONFIG_PATA_OPTIDMA is not set
-+# CONFIG_PATA_PDC_OLD is not set
-+# CONFIG_PATA_RADISYS is not set
-+# CONFIG_PATA_RZ1000 is not set
-+# CONFIG_PATA_SC1200 is not set
-+# CONFIG_PATA_SERVERWORKS is not set
-+# CONFIG_PATA_PDC2027X is not set
-+# CONFIG_PATA_SIL680 is not set
-+# CONFIG_PATA_SIS is not set
-+# CONFIG_PATA_VIA is not set
-+# CONFIG_PATA_WINBOND is not set
-+# CONFIG_PATA_PLATFORM is not set
-+CONFIG_PATA_IXP4XX_CF=y
- # CONFIG_MD is not set
--
--#
--# Fusion MPT device support
--#
- # CONFIG_FUSION is not set
-
- #
- # IEEE 1394 (FireWire) support
- #
-+# CONFIG_FIREWIRE is not set
- # CONFIG_IEEE1394 is not set
--
--#
--# I2O device support
--#
- # CONFIG_I2O is not set
--
--#
--# Network device support
--#
- CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
-+# CONFIG_IFB is not set
- CONFIG_DUMMY=y
- # CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
--
--#
--# ARCnet devices
--#
-+# CONFIG_VETH is not set
- # CONFIG_ARCNET is not set
--
--#
--# PHY device support
--#
- # CONFIG_PHYLIB is not set
--
--#
--# Ethernet (10 or 100Mbit)
--#
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
-+# CONFIG_AX88796 is not set
- # CONFIG_HAPPYMEAL is not set
- # CONFIG_SUNGEM is not set
- # CONFIG_CASSINI is not set
- # CONFIG_NET_VENDOR_3COM is not set
- # CONFIG_SMC91X is not set
- # CONFIG_DM9000 is not set
--
--#
--# Tulip family network device support
--#
- # CONFIG_NET_TULIP is not set
- # CONFIG_HP100 is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
- CONFIG_NET_PCI=y
- # CONFIG_PCNET32 is not set
- # CONFIG_AMD8111_ETH is not set
- # CONFIG_ADAPTEC_STARFIRE is not set
- # CONFIG_B44 is not set
- # CONFIG_FORCEDETH is not set
--# CONFIG_DGRS is not set
- CONFIG_EEPRO100=y
- # CONFIG_E100 is not set
- # CONFIG_FEALNX is not set
-@@ -738,93 +863,75 @@ CONFIG_EEPRO100=y
- # CONFIG_SUNDANCE is not set
- # CONFIG_TLAN is not set
- # CONFIG_VIA_RHINE is not set
--
--#
--# Ethernet (1000 Mbit)
--#
-+# CONFIG_SC92031 is not set
-+CONFIG_NETDEV_1000=y
- # CONFIG_ACENIC is not set
- # CONFIG_DL2K is not set
- # CONFIG_E1000 is not set
-+# CONFIG_E1000E is not set
-+# CONFIG_IP1000 is not set
- # CONFIG_NS83820 is not set
- # CONFIG_HAMACHI is not set
- # CONFIG_YELLOWFIN is not set
- # CONFIG_R8169 is not set
- # CONFIG_SIS190 is not set
- # CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
- # CONFIG_SK98LIN is not set
- # CONFIG_VIA_VELOCITY is not set
- # CONFIG_TIGON3 is not set
- # CONFIG_BNX2 is not set
--
--#
--# Ethernet (10000 Mbit)
--#
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+CONFIG_NETDEV_10000=y
- # CONFIG_CHELSIO_T1 is not set
-+# CONFIG_CHELSIO_T3 is not set
-+# CONFIG_IXGBE is not set
- # CONFIG_IXGB is not set
- # CONFIG_S2IO is not set
--
--#
--# Token Ring devices
--#
-+# CONFIG_MYRI10GE is not set
-+# CONFIG_NETXEN_NIC is not set
-+# CONFIG_NIU is not set
-+# CONFIG_MLX4_CORE is not set
-+# CONFIG_TEHUTI is not set
- # CONFIG_TR is not set
-
- #
--# Wireless LAN (non-hamradio)
--#
--CONFIG_NET_RADIO=y
--
--#
--# Obsolete Wireless cards support (pre-802.11)
--#
--# CONFIG_STRIP is not set
--
--#
--# Wireless 802.11b ISA/PCI cards support
-+# Wireless LAN
- #
--# CONFIG_AIRO is not set
--CONFIG_HERMES=y
--# CONFIG_PLX_HERMES is not set
--# CONFIG_TMD_HERMES is not set
--# CONFIG_NORTEL_HERMES is not set
--CONFIG_PCI_HERMES=y
--# CONFIG_ATMEL is not set
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-
- #
--# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
--#
--# CONFIG_PRISM54 is not set
--# CONFIG_HOSTAP is not set
--CONFIG_NET_WIRELESS=y
--
--#
--# Wan interfaces
-+# USB Network Adapters
- #
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
- CONFIG_WAN=y
--# CONFIG_DSCC4 is not set
- # CONFIG_LANMEDIA is not set
--# CONFIG_SYNCLINK_SYNCPPP is not set
- CONFIG_HDLC=m
--CONFIG_HDLC_RAW=y
-+CONFIG_HDLC_RAW=m
- # CONFIG_HDLC_RAW_ETH is not set
--CONFIG_HDLC_CISCO=y
--CONFIG_HDLC_FR=y
--CONFIG_HDLC_PPP=y
--CONFIG_HDLC_X25=y
-+CONFIG_HDLC_CISCO=m
-+CONFIG_HDLC_FR=m
-+CONFIG_HDLC_PPP=m
-+CONFIG_HDLC_X25=m
- # CONFIG_PCI200SYN is not set
- # CONFIG_WANXL is not set
- # CONFIG_PC300 is not set
-+# CONFIG_PC300TOO is not set
- # CONFIG_FARSYNC is not set
-+# CONFIG_DSCC4 is not set
- CONFIG_DLCI=m
--CONFIG_DLCI_COUNT=24
- CONFIG_DLCI_MAX=8
--CONFIG_WAN_ROUTER_DRIVERS=y
-+CONFIG_WAN_ROUTER_DRIVERS=m
- # CONFIG_CYCLADES_SYNC is not set
- # CONFIG_LAPBETHER is not set
- # CONFIG_X25_ASY is not set
--
--#
--# ATM drivers
--#
-+CONFIG_ATM_DRIVERS=y
- # CONFIG_ATM_DUMMY is not set
- CONFIG_ATM_TCP=m
- # CONFIG_ATM_LANAI is not set
-@@ -842,20 +949,19 @@ CONFIG_ATM_TCP=m
- # CONFIG_HIPPI is not set
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
- # CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
-
- #
- # Input device support
- #
- CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-
- #
- # Userland interfaces
-@@ -865,7 +971,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
- CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
- CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_JOYDEV is not set
--# CONFIG_INPUT_TSDEV is not set
- # CONFIG_INPUT_EVDEV is not set
- # CONFIG_INPUT_EVBUG is not set
-
-@@ -875,8 +980,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- # CONFIG_INPUT_KEYBOARD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
- # CONFIG_INPUT_TOUCHSCREEN is not set
--# CONFIG_INPUT_MISC is not set
-+CONFIG_INPUT_MISC=y
-+CONFIG_INPUT_IXP4XX_BEEPER=y
-+# CONFIG_INPUT_ATI_REMOTE is not set
-+# CONFIG_INPUT_ATI_REMOTE2 is not set
-+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-+# CONFIG_INPUT_POWERMATE is not set
-+# CONFIG_INPUT_YEALINK is not set
-+# CONFIG_INPUT_UINPUT is not set
-
- #
- # Hardware I/O ports
-@@ -895,7 +1008,9 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
- #
- CONFIG_SERIAL_8250=y
- CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_PCI=y
- CONFIG_SERIAL_8250_NR_UARTS=2
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
- # CONFIG_SERIAL_8250_EXTENDED is not set
-
- #
-@@ -907,51 +1022,17 @@ CONFIG_SERIAL_CORE_CONSOLE=y
- CONFIG_UNIX98_PTYS=y
- CONFIG_LEGACY_PTYS=y
- CONFIG_LEGACY_PTY_COUNT=256
--
--#
--# IPMI
--#
- # CONFIG_IPMI_HANDLER is not set
--
--#
--# Watchdog Cards
--#
--CONFIG_WATCHDOG=y
--# CONFIG_WATCHDOG_NOWAYOUT is not set
--
--#
--# Watchdog Device Drivers
--#
--# CONFIG_SOFT_WATCHDOG is not set
--CONFIG_IXP4XX_WATCHDOG=y
--
--#
--# PCI-based Watchdog Cards
--#
--# CONFIG_PCIPCWATCHDOG is not set
--# CONFIG_WDTPCI is not set
-+CONFIG_HW_RANDOM=m
-+CONFIG_HW_RANDOM_IXP4XX=m
- # CONFIG_NVRAM is not set
--# CONFIG_RTC is not set
--# CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
- # CONFIG_APPLICOM is not set
--
--#
--# Ftape, the floppy tape device driver
--#
--# CONFIG_DRM is not set
- # CONFIG_RAW_DRIVER is not set
--
--#
--# TPM devices
--#
- # CONFIG_TCG_TPM is not set
--# CONFIG_TELCLOCK is not set
--
--#
--# I2C support
--#
-+CONFIG_DEVPORT=y
- CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
- CONFIG_I2C_CHARDEV=y
-
- #
-@@ -969,57 +1050,68 @@ CONFIG_I2C_ALGOBIT=y
- # CONFIG_I2C_ALI15X3 is not set
- # CONFIG_I2C_AMD756 is not set
- # CONFIG_I2C_AMD8111 is not set
-+# CONFIG_I2C_GPIO is not set
- # CONFIG_I2C_I801 is not set
- # CONFIG_I2C_I810 is not set
- # CONFIG_I2C_PIIX4 is not set
- # CONFIG_I2C_IOP3XX is not set
- CONFIG_I2C_IXP4XX=y
- # CONFIG_I2C_NFORCE2 is not set
-+# CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_PROSAVAGE is not set
- # CONFIG_I2C_SAVAGE4 is not set
--# CONFIG_SCx200_ACB is not set
-+# CONFIG_I2C_SIMTEC is not set
- # CONFIG_I2C_SIS5595 is not set
- # CONFIG_I2C_SIS630 is not set
- # CONFIG_I2C_SIS96X is not set
-+# CONFIG_I2C_TAOS_EVM is not set
- # CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
- # CONFIG_I2C_VIA is not set
- # CONFIG_I2C_VIAPRO is not set
- # CONFIG_I2C_VOODOO3 is not set
--# CONFIG_I2C_PCA_ISA is not set
-
- #
- # Miscellaneous I2C Chip support
- #
- # CONFIG_SENSORS_DS1337 is not set
- # CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
- CONFIG_SENSORS_EEPROM=y
- # CONFIG_SENSORS_PCF8574 is not set
- # CONFIG_SENSORS_PCA9539 is not set
- # CONFIG_SENSORS_PCF8591 is not set
--# CONFIG_SENSORS_RTC8564 is not set
- # CONFIG_SENSORS_MAX6875 is not set
--# CONFIG_RTC_X1205_I2C is not set
-+# CONFIG_SENSORS_TSL2550 is not set
- # CONFIG_I2C_DEBUG_CORE is not set
- # CONFIG_I2C_DEBUG_ALGO is not set
- # CONFIG_I2C_DEBUG_BUS is not set
- # CONFIG_I2C_DEBUG_CHIP is not set
-
- #
--# Hardware Monitoring support
-+# SPI support
- #
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
- CONFIG_HWMON=y
- # CONFIG_HWMON_VID is not set
-+# CONFIG_SENSORS_AD7418 is not set
- # CONFIG_SENSORS_ADM1021 is not set
- # CONFIG_SENSORS_ADM1025 is not set
- # CONFIG_SENSORS_ADM1026 is not set
-+# CONFIG_SENSORS_ADM1029 is not set
- # CONFIG_SENSORS_ADM1031 is not set
- # CONFIG_SENSORS_ADM9240 is not set
--# CONFIG_SENSORS_ASB100 is not set
-+# CONFIG_SENSORS_ADT7470 is not set
- # CONFIG_SENSORS_ATXP1 is not set
- # CONFIG_SENSORS_DS1621 is not set
--# CONFIG_SENSORS_FSCHER is not set
--# CONFIG_SENSORS_FSCPOS is not set
-+# CONFIG_SENSORS_I5K_AMB is not set
-+# CONFIG_SENSORS_F71805F is not set
-+# CONFIG_SENSORS_F71882FG is not set
-+# CONFIG_SENSORS_F75375S is not set
- # CONFIG_SENSORS_GL518SM is not set
- # CONFIG_SENSORS_GL520SM is not set
- # CONFIG_SENSORS_IT87 is not set
-@@ -1033,67 +1125,268 @@ CONFIG_HWMON=y
- # CONFIG_SENSORS_LM87 is not set
- # CONFIG_SENSORS_LM90 is not set
- # CONFIG_SENSORS_LM92 is not set
-+# CONFIG_SENSORS_LM93 is not set
- # CONFIG_SENSORS_MAX1619 is not set
-+# CONFIG_SENSORS_MAX6650 is not set
- # CONFIG_SENSORS_PC87360 is not set
-+# CONFIG_SENSORS_PC87427 is not set
- # CONFIG_SENSORS_SIS5595 is not set
-+# CONFIG_SENSORS_DME1737 is not set
- # CONFIG_SENSORS_SMSC47M1 is not set
-+# CONFIG_SENSORS_SMSC47M192 is not set
- # CONFIG_SENSORS_SMSC47B397 is not set
-+# CONFIG_SENSORS_THMC50 is not set
- # CONFIG_SENSORS_VIA686A is not set
-+# CONFIG_SENSORS_VT1211 is not set
-+# CONFIG_SENSORS_VT8231 is not set
- # CONFIG_SENSORS_W83781D is not set
-+# CONFIG_SENSORS_W83791D is not set
- # CONFIG_SENSORS_W83792D is not set
-+# CONFIG_SENSORS_W83793 is not set
- # CONFIG_SENSORS_W83L785TS is not set
- # CONFIG_SENSORS_W83627HF is not set
- # CONFIG_SENSORS_W83627EHF is not set
- # CONFIG_HWMON_DEBUG_CHIP is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-
- #
--# Misc devices
-+# Watchdog Device Drivers
- #
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_IXP4XX_WATCHDOG=y
-
- #
--# Multimedia Capabilities Port drivers
-+# PCI-based Watchdog Cards
- #
-+# CONFIG_PCIPCWATCHDOG is not set
-+# CONFIG_WDTPCI is not set
-
- #
--# Multimedia devices
-+# USB-based Watchdog Cards
- #
--# CONFIG_VIDEO_DEV is not set
-+# CONFIG_USBPCWATCHDOG is not set
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+CONFIG_SSB_POSSIBLE=y
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-
- #
--# Digital Video Broadcasting Devices
-+# Multimedia devices
- #
--# CONFIG_DVB is not set
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-
- #
- # Graphics support
- #
-+# CONFIG_DRM is not set
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
- # CONFIG_FB is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-
- #
- # Sound
- #
- # CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-
- #
--# USB support
--#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
--# CONFIG_USB is not set
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+CONFIG_USB_EHCI_HCD=y
-+# CONFIG_USB_EHCI_SPLIT_ISO is not set
-+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+CONFIG_USB_UHCI_HCD=y
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
- #
-
- #
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+# CONFIG_USB_MON is not set
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+# CONFIG_USB_ATM is not set
-+
-+#
- # USB Gadget Support
- #
- # CONFIG_USB_GADGET is not set
-+# CONFIG_MMC is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-
- #
--# MMC/SD Card support
-+# LED drivers
-+#
-+CONFIG_LEDS_IXP4XX=y
-+# CONFIG_LEDS_GPIO is not set
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_IDE_DISK=y
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+CONFIG_RTC_DRV_X1205=y
-+CONFIG_RTC_DRV_PCF8563=y
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
- #
--# CONFIG_MMC is not set
-
- #
- # File systems
-@@ -1107,16 +1400,19 @@ CONFIG_EXT3_FS=y
- CONFIG_EXT3_FS_XATTR=y
- CONFIG_EXT3_FS_POSIX_ACL=y
- # CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
- CONFIG_JBD=y
--# CONFIG_JBD_DEBUG is not set
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
- CONFIG_FS_POSIX_ACL=y
- # CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
- CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- CONFIG_DNOTIFY=y
- # CONFIG_AUTOFS_FS is not set
-@@ -1140,11 +1436,12 @@ CONFIG_DNOTIFY=y
- # Pseudo filesystems
- #
- CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
- CONFIG_SYSFS=y
- CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
--CONFIG_RAMFS=y
--# CONFIG_RELAYFS_FS is not set
-+# CONFIG_CONFIGFS_FS is not set
-
- #
- # Miscellaneous filesystems
-@@ -1156,13 +1453,15 @@ CONFIG_RAMFS=y
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
--# CONFIG_JFFS_FS is not set
- CONFIG_JFFS2_FS=y
- CONFIG_JFFS2_FS_DEBUG=0
- CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
- # CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
- # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
- CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
- CONFIG_JFFS2_RTIME=y
- # CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
-@@ -1171,10 +1470,7 @@ CONFIG_JFFS2_RTIME=y
- # CONFIG_QNX4FS_FS is not set
- # CONFIG_SYSV_FS is not set
- # CONFIG_UFS_FS is not set
--
--#
--# Network File Systems
--#
-+CONFIG_NETWORK_FILESYSTEMS=y
- CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
- # CONFIG_NFS_V3_ACL is not set
-@@ -1186,6 +1482,7 @@ CONFIG_LOCKD=y
- CONFIG_LOCKD_V4=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
-+# CONFIG_SUNRPC_BIND34 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
- # CONFIG_SMB_FS is not set
-@@ -1193,7 +1490,6 @@ CONFIG_SUNRPC=y
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
--# CONFIG_9P_FS is not set
-
- #
- # Partition Types
-@@ -1213,37 +1509,53 @@ CONFIG_MSDOS_PARTITION=y
- # CONFIG_SGI_PARTITION is not set
- # CONFIG_ULTRIX_PARTITION is not set
- # CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
- # CONFIG_EFI_PARTITION is not set
--
--#
--# Native Language Support
--#
-+# CONFIG_SYSV68_PARTITION is not set
- # CONFIG_NLS is not set
--
--#
--# Profiling support
--#
-+# CONFIG_DLM is not set
-+CONFIG_INSTRUMENTATION=y
- # CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
--CONFIG_DEBUG_KERNEL=y
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_MAGIC_SYSRQ=y
--CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_DETECT_SOFTLOCKUP=y
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
--# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
- # CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
- CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_SAMPLES is not set
- # CONFIG_DEBUG_USER is not set
- CONFIG_DEBUG_ERRORS=y
- CONFIG_DEBUG_LL=y
-@@ -1254,22 +1566,22 @@ CONFIG_DEBUG_LL=y
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
- # CONFIG_CRYPTO is not set
-
- #
--# Hardware crypto devices
--#
--
--#
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
-+# CONFIG_CRC_ITU_T is not set
- CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
diff --git a/target/linux/ixp4xx/patches-2.6.24/016-dsmg600_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.24/016-dsmg600_auto_power_on.patch
deleted file mode 100644
index a95da08a0e..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/016-dsmg600_auto_power_on.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 67e494e3e03ef807255f084800d8658b89ff5fec Mon Sep 17 00:00:00 2001
-From: Rod Whitby <rod@whitby.id.au>
-Date: Tue, 29 Jan 2008 10:00:25 +1030
-Subject: ixp4xx: Button updates for the dsmg600 board (Patch #4769)
-
- * Remove the superfluous declaration of ctrl_alt_del().
- * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
- * Perform the reset on the release of the power button, so that
- NAS devices which have been set to auto-power-on (by solder
- bridging the power button) do not continuously power cycle.
- * Remove all superflous constants from dsmg600.h
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
-
-PATCH FOLLOWS
-KernelVersion: 2.6.24-git5
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-power.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-power.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-power.c
-@@ -26,14 +26,13 @@
- #include <linux/jiffies.h>
- #include <linux/timer.h>
-
-+#include <asm/gpio.h>
- #include <asm/mach-types.h>
-
--extern void ctrl_alt_del(void);
--
- /* This is used to make sure the power-button pusher is serious. The button
- * must be held until the value of this counter reaches zero.
- */
--static volatile int power_button_countdown;
-+static int power_button_countdown;
-
- /* Must hold the button down for at least this many counts to be processed */
- #define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-@@ -47,22 +46,27 @@ static void dsmg600_power_handler(unsign
- * state of the power button.
- */
-
-- if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
-+ if (gpio_get_value(DSMG600_PB_GPIO)) {
-
- /* IO Pin is 1 (button pushed) */
-+ if (power_button_countdown > 0)
-+ power_button_countdown--;
-+
-+ } else {
-+
-+ /* Done on button release, to allow for auto-power-on mods. */
- if (power_button_countdown == 0) {
-- /* Signal init to do the ctrlaltdel action, this will bypass
-- * init if it hasn't started and do a kernel_restart.
-+ /* Signal init to do the ctrlaltdel action,
-+ * this will bypass init if it hasn't started
-+ * and do a kernel_restart.
- */
- ctrl_alt_del();
-
- /* Change the state of the power LED to "blink" */
- gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-+ } else {
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
- }
-- power_button_countdown--;
--
-- } else {
-- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
- }
-
- mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-@@ -81,12 +85,12 @@ static int __init dsmg600_power_init(voi
- if (!(machine_is_dsmg600()))
- return 0;
-
-- if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
-+ if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
- IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
- NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-- DSMG600_RB_IRQ);
-+ gpio_to_irq(DSMG600_RB_GPIO));
-
- return -EIO;
- }
-@@ -114,7 +118,7 @@ static void __exit dsmg600_power_exit(vo
-
- del_timer_sync(&dsmg600_power_timer);
-
-- free_irq(DSMG600_RB_IRQ, NULL);
-+ free_irq(gpio_to_irq(DSMG600_RB_GPIO), NULL);
- }
-
- module_init(dsmg600_power_init);
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/dsmg600.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/dsmg600.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/dsmg600.h
-@@ -40,18 +40,13 @@
- /* Buttons */
-
- #define DSMG600_PB_GPIO 15 /* power button */
--#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO)
--
- #define DSMG600_RB_GPIO 3 /* reset button */
-
--#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3
-+/* Power control */
-
- #define DSMG600_PO_GPIO 2 /* power off */
-
- /* LEDs */
-
- #define DSMG600_LED_PWR_GPIO 0
--#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO)
--
- #define DSMG600_LED_WLAN_GPIO 14
--#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO)
diff --git a/target/linux/ixp4xx/patches-2.6.24/017-nas100d_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.24/017-nas100d_auto_power_on.patch
deleted file mode 100644
index 3c66cb45fe..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/017-nas100d_auto_power_on.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-From 6261e59795d861f21f63878944900a3da713348c Mon Sep 17 00:00:00 2001
-From: Rod Whitby <rod@whitby.id.au>
-Date: Tue, 29 Jan 2008 09:53:46 +1030
-Subject: ixp4xx: Button and LED updates for the nas100d board (Patch #4768)
-
- * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
- * Perform the reset only after the power button has been held down
- for at least two seconds. Do the reset on the release of the power
- button, so that NAS devices which have been set to auto-power-on (by
- solder bridging the power button) do not continuously power cycle.
- * Remove all superflous constants from nas100d.h
- * Add LED constants to nas100d.h while we're there.
- * Update the board LED setup code to use those constants.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
-
-PATCH FOLLOWS
-KernelVersion: 2.6.24-git5
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-power.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-power.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-power.c
-@@ -21,15 +21,59 @@
- #include <linux/irq.h>
- #include <linux/module.h>
- #include <linux/reboot.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
-
-+#include <asm/gpio.h>
- #include <asm/mach-types.h>
-
--static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-+/* This is used to make sure the power-button pusher is serious. The button
-+ * must be held until the value of this counter reaches zero.
-+ */
-+static int power_button_countdown;
-+
-+/* Must hold the button down for at least this many counts to be processed */
-+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-+
-+static void nas100d_power_handler(unsigned long data);
-+static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
-+
-+static void nas100d_power_handler(unsigned long data)
- {
-- /* Signal init to do the ctrlaltdel action, this will bypass init if
-- * it hasn't started and do a kernel_restart.
-+ /* This routine is called twice per second to check the
-+ * state of the power button.
- */
-- ctrl_alt_del();
-+
-+ if (gpio_get_value(NAS100D_PB_GPIO)) {
-+
-+ /* IO Pin is 1 (button pushed) */
-+ if (power_button_countdown > 0)
-+ power_button_countdown--;
-+
-+ } else {
-+
-+ /* Done on button release, to allow for auto-power-on mods. */
-+ if (power_button_countdown == 0) {
-+ /* Signal init to do the ctrlaltdel action,
-+ * this will bypass init if it hasn't started
-+ * and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ /* Change the state of the power LED to "blink" */
-+ gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-+ } else {
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+ }
-+ }
-+
-+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-+}
-+
-+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly. */
-+ machine_power_off();
-
- return IRQ_HANDLED;
- }
-@@ -39,17 +83,30 @@ static int __init nas100d_power_init(voi
- if (!(machine_is_nas100d()))
- return 0;
-
-- set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
-+ set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
-
-- if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
-+ if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
- IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-- NAS100D_RB_IRQ);
-+ gpio_to_irq(NAS100D_RB_GPIO));
-
- return -EIO;
- }
-
-+ /* The power button on the Iomega NAS100d is on GPIO 14, but
-+ * it cannot handle interrupts on that GPIO line. So we'll
-+ * have to poll it with a kernel timer.
-+ */
-+
-+ /* Make sure that the power button GPIO is set up as an input */
-+ gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Set the initial value for the power button IRQ handler */
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+
-+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-+
- return 0;
- }
-
-@@ -58,7 +115,9 @@ static void __exit nas100d_power_exit(vo
- if (!(machine_is_nas100d()))
- return;
-
-- free_irq(NAS100D_RB_IRQ, NULL);
-+ del_timer_sync(&nas100d_power_timer);
-+
-+ free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
- }
-
- module_init(nas100d_power_init);
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -43,20 +43,20 @@ static struct platform_device nas100d_fl
- static struct resource nas100d_led_resources[] = {
- {
- .name = "wlan", /* green led */
-- .start = 0,
-- .end = 0,
-+ .start = NAS100D_LED_WLAN_GPIO,
-+ .end = NAS100D_LED_WLAN_GPIO,
- .flags = IXP4XX_GPIO_LOW,
- },
- {
-- .name = "ready", /* blue power led (off is flashing!) */
-- .start = 15,
-- .end = 15,
-+ .name = "power", /* blue power led (off=flashing) */
-+ .start = NAS100D_LED_PWR_GPIO,
-+ .end = NAS100D_LED_PWR_GPIO,
- .flags = IXP4XX_GPIO_LOW,
- },
- {
- .name = "disk", /* yellow led */
-- .start = 3,
-- .end = 3,
-+ .start = NAS100D_LED_DISK_GPIO,
-+ .end = NAS100D_LED_DISK_GPIO,
- .flags = IXP4XX_GPIO_LOW,
- },
- };
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/nas100d.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/nas100d.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/nas100d.h
-@@ -38,15 +38,15 @@
-
- /* Buttons */
-
--#define NAS100D_PB_GPIO 14
--#define NAS100D_RB_GPIO 4
-+#define NAS100D_PB_GPIO 14 /* power button */
-+#define NAS100D_RB_GPIO 4 /* reset button */
-+
-+/* Power control */
-+
- #define NAS100D_PO_GPIO 12 /* power off */
-
--#define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14
--#define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4
-+/* LEDs */
-
--/*
--#define NAS100D_PB_BM (1L << NAS100D_PB_GPIO)
--#define NAS100D_PO_BM (1L << NAS100D_PO_GPIO)
--#define NAS100D_RB_BM (1L << NAS100D_RB_GPIO)
--*/
-+#define NAS100D_LED_WLAN_GPIO 0
-+#define NAS100D_LED_DISK_GPIO 3
-+#define NAS100D_LED_PWR_GPIO 15
diff --git a/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_rtc_info.patch b/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_rtc_info.patch
deleted file mode 100644
index 60a3c28c1d..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_rtc_info.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 88721db37ead2212a54c1392e2e65bae78d2604b Mon Sep 17 00:00:00 2001
-From: Rod Whitby <rod@whitby.id.au>
-Date: Tue, 29 Jan 2008 10:05:48 +1030
-Subject: ixp4xx: Register nslu2 rtc i2c_board_info (Patch #4772)
-
-Register the i2c board info related to the RTC chip on the nslu2 board
-to allow it to be found automatically on boot.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
-
-PATCH FOLLOWS
-KernelVersion: 2.6.24-git5
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
-@@ -47,6 +48,12 @@ static struct i2c_gpio_platform_data nsl
- .scl_pin = NSLU2_SCL_PIN,
- };
-
-+static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
-+ {
-+ I2C_BOARD_INFO("rtc-x1205", 0x6f),
-+ },
-+};
-+
- #ifdef CONFIG_LEDS_IXP4XX
- static struct resource nslu2_led_resources[] = {
- {
-@@ -183,6 +190,9 @@ static void __init nslu2_init(void)
-
- pm_power_off = nslu2_power_off;
-
-+ i2c_register_board_info(0, nslu2_i2c_board_info,
-+ ARRAY_SIZE(nslu2_i2c_board_info));
-+
- /*
- * This is only useful on a modified machine, but it is valuable
- * to have it first in order to see debug messages, and so that
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -16,6 +16,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
-@@ -39,6 +40,12 @@ static struct platform_device nas100d_fl
- .resource = &nas100d_flash_resource,
- };
-
-+static struct i2c_board_info __initdata nas100d_i2c_board_info [] = {
-+ {
-+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-+ },
-+};
-+
- #ifdef CONFIG_LEDS_IXP4XX
- static struct resource nas100d_led_resources[] = {
- {
-@@ -157,6 +164,9 @@ static void __init nas100d_init(void)
-
- pm_power_off = nas100d_power_off;
-
-+ i2c_register_board_info(0, nas100d_i2c_board_info,
-+ ARRAY_SIZE(nas100d_i2c_board_info));
-+
- /*
- * This is only useful on a modified machine, but it is valuable
- * to have it first in order to see debug messages, and so that
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -14,6 +14,7 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-
- #include <asm/mach-types.h>
-@@ -51,6 +52,12 @@ static struct platform_device dsmg600_i2
- },
- };
-
-+static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
-+ {
-+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-+ },
-+};
-+
- #ifdef CONFIG_LEDS_CLASS
- static struct resource dsmg600_led_resources[] = {
- {
-@@ -158,6 +165,9 @@ static void __init dsmg600_init(void)
-
- pm_power_off = dsmg600_power_off;
-
-+ i2c_register_board_info(0, dsmg600_i2c_board_info,
-+ ARRAY_SIZE(dsmg600_i2c_board_info));
-+
- /* The UART is required on the DSM-G600 (Redboot cannot use the
- * NIC) -- do it here so that it does *not* get removed if
- * platform_add_devices fails!
diff --git a/target/linux/ixp4xx/patches-2.6.24/021-ixp4xx_use_leds_gpio.patch b/target/linux/ixp4xx/patches-2.6.24/021-ixp4xx_use_leds_gpio.patch
deleted file mode 100644
index 58c6ad9e3d..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/021-ixp4xx_use_leds_gpio.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From 383256474f2ba043bdb57a657f9d786df88780f1 Mon Sep 17 00:00:00 2001
-From: Rod Whitby <rod@whitby.id.au>
-Date: Tue, 29 Jan 2008 17:17:29 +1030
-Subject: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver
-
-These are the only three boards to use the IXP4XX-GPIO-LED driver, and
-they can all use the new leds-gpio driver instead with no change in
-functionality.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
---
-PATCH FOLLOWS
-KernelVersion: v2.6.24-1915-gc9b12e6
-
-Index: linux-2.6.24.7/arch/arm/configs/ixp4xx_defconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/configs/ixp4xx_defconfig
-+++ linux-2.6.24.7/arch/arm/configs/ixp4xx_defconfig
-@@ -1330,8 +1330,8 @@ CONFIG_LEDS_CLASS=y
- #
- # LED drivers
- #
--CONFIG_LEDS_IXP4XX=y
--# CONFIG_LEDS_GPIO is not set
-+# CONFIG_LEDS_IXP4XX is not set
-+CONFIG_LEDS_GPIO=y
-
- #
- # LED Triggers
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -14,6 +14,7 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/leds.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-
-@@ -58,29 +59,28 @@ static struct i2c_board_info __initdata
- },
- };
-
--#ifdef CONFIG_LEDS_CLASS
--static struct resource dsmg600_led_resources[] = {
-+static struct gpio_led dsmg600_led_pins[] = {
- {
-- .name = "power",
-- .start = DSMG600_LED_PWR_GPIO,
-- .end = DSMG600_LED_PWR_GPIO,
-- .flags = IXP4XX_GPIO_HIGH,
-+ .name = "power",
-+ .gpio = DSMG600_LED_PWR_GPIO,
- },
- {
-- .name = "wlan",
-- .start = DSMG600_LED_WLAN_GPIO,
-- .end = DSMG600_LED_WLAN_GPIO,
-- .flags = IXP4XX_GPIO_LOW,
-+ .name = "wlan",
-+ .gpio = DSMG600_LED_WLAN_GPIO,
-+ .active_low = true,
- },
- };
-
-+static struct gpio_led_platform_data dsmg600_led_data = {
-+ .num_leds = ARRAY_SIZE(dsmg600_led_pins),
-+ .leds = dsmg600_led_pins,
-+};
-+
- static struct platform_device dsmg600_leds = {
-- .name = "IXP4XX-GPIO-LED",
-- .id = -1,
-- .num_resources = ARRAY_SIZE(dsmg600_led_resources),
-- .resource = dsmg600_led_resources,
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &dsmg600_led_data,
- };
--#endif
-
- static struct resource dsmg600_uart_resources[] = {
- {
-@@ -128,6 +128,7 @@ static struct platform_device dsmg600_ua
- static struct platform_device *dsmg600_devices[] __initdata = {
- &dsmg600_i2c_gpio,
- &dsmg600_flash,
-+ &dsmg600_leds,
- };
-
- static void dsmg600_power_off(void)
-@@ -175,11 +176,6 @@ static void __init dsmg600_init(void)
- (void)platform_device_register(&dsmg600_uart);
-
- platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
--
--#ifdef CONFIG_LEDS_CLASS
-- /* We don't care whether or not this works. */
-- (void)platform_device_register(&dsmg600_leds);
--#endif
- }
-
- MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -46,35 +46,34 @@ static struct i2c_board_info __initdata
- },
- };
-
--#ifdef CONFIG_LEDS_IXP4XX
--static struct resource nas100d_led_resources[] = {
-+static struct gpio_led nas100d_led_pins[] = {
- {
- .name = "wlan", /* green led */
-- .start = NAS100D_LED_WLAN_GPIO,
-- .end = NAS100D_LED_WLAN_GPIO,
-- .flags = IXP4XX_GPIO_LOW,
-+ .gpio = NAS100D_LED_WLAN_GPIO,
-+ .active_low = true,
- },
- {
- .name = "power", /* blue power led (off=flashing) */
-- .start = NAS100D_LED_PWR_GPIO,
-- .end = NAS100D_LED_PWR_GPIO,
-- .flags = IXP4XX_GPIO_LOW,
-+ .gpio = NAS100D_LED_PWR_GPIO,
-+ .active_low = true,
- },
- {
- .name = "disk", /* yellow led */
-- .start = NAS100D_LED_DISK_GPIO,
-- .end = NAS100D_LED_DISK_GPIO,
-- .flags = IXP4XX_GPIO_LOW,
-+ .gpio = NAS100D_LED_DISK_GPIO,
-+ .active_low = true,
- },
- };
-
-+static struct gpio_led_platform_data nas100d_led_data = {
-+ .num_leds = ARRAY_SIZE(nas100d_led_pins),
-+ .leds = nas100d_led_pins,
-+};
-+
- static struct platform_device nas100d_leds = {
-- .name = "IXP4XX-GPIO-LED",
-+ .name = "leds-gpio",
- .id = -1,
-- .num_resources = ARRAY_SIZE(nas100d_led_resources),
-- .resource = nas100d_led_resources,
-+ .dev.platform_data = &nas100d_led_data,
- };
--#endif
-
- static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
- .sda_pin = NAS100D_SDA_PIN,
-@@ -135,9 +134,7 @@ static struct platform_device nas100d_ua
- static struct platform_device *nas100d_devices[] __initdata = {
- &nas100d_i2c_gpio,
- &nas100d_flash,
--#ifdef CONFIG_LEDS_IXP4XX
- &nas100d_leds,
--#endif
- };
-
- static void nas100d_power_off(void)
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -54,41 +54,37 @@ static struct i2c_board_info __initdata
- },
- };
-
--#ifdef CONFIG_LEDS_IXP4XX
--static struct resource nslu2_led_resources[] = {
-+static struct gpio_led nslu2_led_pins[] = {
- {
- .name = "ready", /* green led */
-- .start = NSLU2_LED_GRN_GPIO,
-- .end = NSLU2_LED_GRN_GPIO,
-- .flags = IXP4XX_GPIO_HIGH,
-+ .gpio = NSLU2_LED_GRN_GPIO,
- },
- {
- .name = "status", /* red led */
-- .start = NSLU2_LED_RED_GPIO,
-- .end = NSLU2_LED_RED_GPIO,
-- .flags = IXP4XX_GPIO_HIGH,
-+ .gpio = NSLU2_LED_RED_GPIO,
- },
- {
- .name = "disk-1",
-- .start = NSLU2_LED_DISK1_GPIO,
-- .end = NSLU2_LED_DISK1_GPIO,
-- .flags = IXP4XX_GPIO_LOW,
-+ .gpio = NSLU2_LED_DISK1_GPIO,
-+ .active_low = true,
- },
- {
- .name = "disk-2",
-- .start = NSLU2_LED_DISK2_GPIO,
-- .end = NSLU2_LED_DISK2_GPIO,
-- .flags = IXP4XX_GPIO_LOW,
-+ .gpio = NSLU2_LED_DISK2_GPIO,
-+ .active_low = true,
- },
- };
-
-+static struct gpio_led_platform_data nslu2_led_data = {
-+ .num_leds = ARRAY_SIZE(nslu2_led_pins),
-+ .leds = nslu2_led_pins,
-+};
-+
- static struct platform_device nslu2_leds = {
-- .name = "IXP4XX-GPIO-LED",
-+ .name = "leds-gpio",
- .id = -1,
-- .num_resources = ARRAY_SIZE(nslu2_led_resources),
-- .resource = nslu2_led_resources,
-+ .dev.platform_data = &nslu2_led_data,
- };
--#endif
-
- static struct platform_device nslu2_i2c_gpio = {
- .name = "i2c-gpio",
-@@ -151,9 +147,7 @@ static struct platform_device *nslu2_dev
- &nslu2_i2c_gpio,
- &nslu2_flash,
- &nslu2_beeper,
--#ifdef CONFIG_LEDS_IXP4XX
- &nslu2_leds,
--#endif
- };
-
- static void nslu2_power_off(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch
deleted file mode 100644
index bf77df7b58..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/030-ixp4xx_fsg_board_support.patch
+++ /dev/null
@@ -1,772 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -125,6 +125,15 @@ config ARCH_IXDP4XX
- depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
- default y
-
-+config MACH_FSG
-+ bool
-+ prompt "Freecom FSG-3"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Freecom's
-+ FSG-3 device. For more information on this platform,
-+ see http://www.nslu2-linux.org/wiki/FSG3/HomePage
-+
- #
- # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
- #
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
-+obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-
- obj-y += common.o
-
-@@ -28,5 +29,6 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-se
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
-+obj-$(CONFIG_MACH_FSG) += fsg-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/fsg-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/fsg-pci.c
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/arch/mach-ixp4xx/fsg-pci.c
-+ *
-+ * FSG board-level PCI initialization
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init fsg_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
-+ IRQ_FSG_PCI_INTC,
-+ IRQ_FSG_PCI_INTB,
-+ IRQ_FSG_PCI_INTA,
-+ };
-+
-+ int irq = -1;
-+ slot = slot - 11;
-+
-+ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
-+ irq = pci_irq_table[(slot - 1)];
-+ printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
-+ __func__, slot, pin, irq);
-+
-+ return irq;
-+}
-+
-+struct hw_pci fsg_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = fsg_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = fsg_map_irq,
-+};
-+
-+int __init fsg_pci_init(void)
-+{
-+ if (machine_is_fsg())
-+ pci_common_init(&fsg_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(fsg_pci_init);
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/fsg-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/fsg-setup.c
-@@ -0,0 +1,275 @@
-+/*
-+ * arch/arm/mach-ixp4xx/fsg-setup.c
-+ *
-+ * FSG board-setup
-+ *
-+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ * based on nslu2-power.c
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/irq.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/leds.h>
-+#include <linux/reboot.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/io.h>
-+#include <asm/gpio.h>
-+
-+static struct flash_platform_data fsg_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource fsg_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device fsg_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &fsg_flash_data,
-+ .num_resources = 1,
-+ .resource = &fsg_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
-+ .sda_pin = FSG_SDA_PIN,
-+ .scl_pin = FSG_SCL_PIN,
-+};
-+
-+static struct platform_device fsg_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &fsg_i2c_gpio_data,
-+ },
-+};
-+
-+static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
-+ {
-+ I2C_BOARD_INFO("rtc-isl1208", 0x6f),
-+ },
-+};
-+
-+static struct resource fsg_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port fsg_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device fsg_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = fsg_uart_data,
-+ .num_resources = ARRAY_SIZE(fsg_uart_resources),
-+ .resource = fsg_uart_resources,
-+};
-+
-+static struct platform_device fsg_leds = {
-+ .name = "fsg-led",
-+ .id = -1,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info fsg_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 4,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device fsg_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = fsg_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = fsg_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *fsg_devices[] __initdata = {
-+ &fsg_i2c_gpio,
-+ &fsg_flash,
-+ &fsg_leds,
-+ &fsg_eth[0],
-+ &fsg_eth[1],
-+};
-+
-+static void fsg_power_off(void)
-+{
-+ printk(KERN_INFO "Restarting system.\n");
-+ machine_restart(NULL);
-+}
-+
-+static irqreturn_t fsg_power_handler(int irq, void *dev_id)
-+{
-+ /* Signal init to do the ctrlaltdel action, this will bypass init if
-+ * it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly.
-+ */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void __init fsg_init(void)
-+{
-+ DECLARE_MAC_BUF(mac_buf);
-+ uint8_t __iomem *f;
-+ int i;
-+
-+ ixp4xx_sys_init();
-+
-+ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ fsg_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ /* Configure CS2 for operation, 8bit and writable */
-+ *IXP4XX_EXP_CS2 = 0xbfff0002;
-+
-+ i2c_register_board_info(0, fsg_i2c_board_info,
-+ ARRAY_SIZE(fsg_i2c_board_info));
-+
-+ /* This is only useful on a modified machine, but it is valuable
-+ * to have it first in order to see debug messages, and so that
-+ * it does *not* get removed if platform_add_devices fails!
-+ */
-+ (void)platform_device_register(&fsg_uart);
-+
-+ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
-+
-+ pm_power_off = fsg_power_off;
-+
-+ set_irq_type(gpio_to_irq(FSG_RB_GPIO), IRQT_LOW);
-+ if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
-+ IRQF_DISABLED, "FSG reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ gpio_to_irq(FSG_RB_GPIO));
-+ }
-+
-+ set_irq_type(gpio_to_irq(FSG_SB_GPIO), IRQT_LOW);
-+ if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
-+ IRQF_DISABLED, "FSG power button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+ gpio_to_irq(FSG_SB_GPIO));
-+ }
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC addresses.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
-+ if (f) {
-+#ifdef __ARMEB__
-+ for (i = 0; i < 6; i++) {
-+ fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
-+ fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
-+ }
-+#else
-+
-+ /*
-+ Endian-swapped reads from unaligned addresses are
-+ required to extract the two MACs from the big-endian
-+ Redboot config area in flash.
-+ */
-+
-+ fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
-+ fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
-+ fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
-+ fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
-+ fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
-+ fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
-+
-+ fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
-+ fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
-+ fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
-+ fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
-+ fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
-+ fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
-+#endif
-+ iounmap(f);
-+ }
-+ printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
-+ print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
-+ printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
-+ print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
-+
-+}
-+
-+MACHINE_START(FSG, "Freecom FSG-3")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = fsg_init,
-+MACHINE_END
-+
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/fsg.h
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/fsg.h
-@@ -0,0 +1,50 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/fsg.h
-+ *
-+ * Freecom FSG-3 platform specific definitions
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * Based on coyote.h by
-+ * Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define FSG_SDA_PIN 12
-+#define FSG_SCL_PIN 13
-+
-+/*
-+ * FSG PCI IRQs
-+ */
-+#define FSG_PCI_MAX_DEV 3
-+#define FSG_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define FSG_PCI_INTA_PIN 6
-+#define FSG_PCI_INTB_PIN 7
-+#define FSG_PCI_INTC_PIN 5
-+
-+/* Buttons */
-+
-+#define FSG_SB_GPIO 4 /* sync button */
-+#define FSG_RB_GPIO 9 /* reset button */
-+#define FSG_UB_GPIO 10 /* usb button */
-+
-+/* LEDs */
-+
-+#define FSG_LED_WLAN_BIT 0
-+#define FSG_LED_WAN_BIT 1
-+#define FSG_LED_SATA_BIT 2
-+#define FSG_LED_USB_BIT 4
-+#define FSG_LED_RING_BIT 5
-+#define FSG_LED_SYNC_BIT 7
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -45,5 +45,6 @@
- #include "nslu2.h"
- #include "nas100d.h"
- #include "dsmg600.h"
-+#include "fsg.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/irqs.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/irqs.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/irqs.h
-@@ -128,4 +128,11 @@
- #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
- #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
-
-+/*
-+ * Freecom FSG-3 Board IRQs
-+ */
-+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
-+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
-+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
-+
- #endif
-Index: linux-2.6.24.7/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Kconfig
-+++ linux-2.6.24.7/drivers/leds/Kconfig
-@@ -48,6 +48,12 @@ config LEDS_IXP4XX
- particular board must have LEDs and they must be connected
- to the GPIO lines. If unsure, say Y.
-
-+config LEDS_FSG
-+ tristate "LED Support for the Freecom FSG-3"
-+ depends on LEDS_CLASS && MACH_FSG
-+ help
-+ This option enables support for the LEDs on the Freecom FSG-3.
-+
- config LEDS_TOSA
- tristate "LED Support for the Sharp SL-6000 series"
- depends on LEDS_CLASS && PXA_SHARPSL
-Index: linux-2.6.24.7/drivers/leds/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/leds/Makefile
-+++ linux-2.6.24.7/drivers/leds/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-
- obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
- obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
-+obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-Index: linux-2.6.24.7/drivers/leds/leds-fsg.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/drivers/leds/leds-fsg.c
-@@ -0,0 +1,261 @@
-+/*
-+ * LED Driver for the Freecom FSG-3
-+ *
-+ * Copyright (c) 2008 Rod Whitby <rod@whitby.id.au>
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ *
-+ * Based on leds-spitz.c
-+ * Copyright 2005-2006 Openedhand Ltd.
-+ * Author: Richard Purdie <rpurdie@openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/io.h>
-+
-+static short __iomem *latch_address;
-+static unsigned short latch_value;
-+
-+
-+static void fsg_led_wlan_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_WLAN_BIT);
-+ *latch_address = latch_value;
-+ } else {
-+ latch_value |= (1 << FSG_LED_WLAN_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_wan_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_WAN_BIT);
-+ *latch_address = latch_value;
-+ } else {
-+ latch_value |= (1 << FSG_LED_WAN_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_sata_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_SATA_BIT);
-+ *latch_address = latch_value;
-+ } else {
-+ latch_value |= (1 << FSG_LED_SATA_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_usb_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_USB_BIT);
-+ *latch_address = latch_value;
-+ } else {
-+ latch_value |= (1 << FSG_LED_USB_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_sync_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_SYNC_BIT);
-+ *latch_address = latch_value;
-+ } else {
-+ latch_value |= (1 << FSG_LED_SYNC_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+static void fsg_led_ring_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ if (value) {
-+ latch_value &= ~(1 << FSG_LED_RING_BIT);
-+ *latch_address = latch_value;
-+ } else {
-+ latch_value |= (1 << FSG_LED_RING_BIT);
-+ *latch_address = latch_value;
-+ }
-+}
-+
-+
-+
-+static struct led_classdev fsg_wlan_led = {
-+ .name = "fsg:blue:wlan",
-+ .brightness_set = fsg_led_wlan_set,
-+};
-+
-+static struct led_classdev fsg_wan_led = {
-+ .name = "fsg:blue:wan",
-+ .brightness_set = fsg_led_wan_set,
-+};
-+
-+static struct led_classdev fsg_sata_led = {
-+ .name = "fsg:blue:sata",
-+ .brightness_set = fsg_led_sata_set,
-+};
-+
-+static struct led_classdev fsg_usb_led = {
-+ .name = "fsg:blue:usb",
-+ .brightness_set = fsg_led_usb_set,
-+};
-+
-+static struct led_classdev fsg_sync_led = {
-+ .name = "fsg:blue:sync",
-+ .brightness_set = fsg_led_sync_set,
-+};
-+
-+static struct led_classdev fsg_ring_led = {
-+ .name = "fsg:blue:ring",
-+ .brightness_set = fsg_led_ring_set,
-+};
-+
-+
-+
-+#ifdef CONFIG_PM
-+static int fsg_led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ led_classdev_suspend(&fsg_wlan_led);
-+ led_classdev_suspend(&fsg_wan_led);
-+ led_classdev_suspend(&fsg_sata_led);
-+ led_classdev_suspend(&fsg_usb_led);
-+ led_classdev_suspend(&fsg_sync_led);
-+ led_classdev_suspend(&fsg_ring_led);
-+ return 0;
-+}
-+
-+static int fsg_led_resume(struct platform_device *dev)
-+{
-+ led_classdev_resume(&fsg_wlan_led);
-+ led_classdev_resume(&fsg_wan_led);
-+ led_classdev_resume(&fsg_sata_led);
-+ led_classdev_resume(&fsg_usb_led);
-+ led_classdev_resume(&fsg_sync_led);
-+ led_classdev_resume(&fsg_ring_led);
-+ return 0;
-+}
-+#endif
-+
-+
-+static int fsg_led_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
-+ if (ret < 0)
-+ goto failwlan;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
-+ if (ret < 0)
-+ goto failwan;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
-+ if (ret < 0)
-+ goto failsata;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
-+ if (ret < 0)
-+ goto failusb;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
-+ if (ret < 0)
-+ goto failsync;
-+
-+ ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
-+ if (ret < 0)
-+ goto failring;
-+
-+ /* Map the LED chip select address space */
-+ latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
-+ if (!latch_address) {
-+ ret = -ENOMEM;
-+ goto failremap;
-+ }
-+
-+ latch_value = 0xffff;
-+ *latch_address = latch_value;
-+
-+ return ret;
-+
-+ failremap:
-+ led_classdev_unregister(&fsg_ring_led);
-+ failring:
-+ led_classdev_unregister(&fsg_sync_led);
-+ failsync:
-+ led_classdev_unregister(&fsg_usb_led);
-+ failusb:
-+ led_classdev_unregister(&fsg_sata_led);
-+ failsata:
-+ led_classdev_unregister(&fsg_wan_led);
-+ failwan:
-+ led_classdev_unregister(&fsg_wlan_led);
-+ failwlan:
-+
-+ return ret;
-+}
-+
-+static int fsg_led_remove(struct platform_device *pdev)
-+{
-+ iounmap(latch_address);
-+
-+ led_classdev_unregister(&fsg_wlan_led);
-+ led_classdev_unregister(&fsg_wan_led);
-+ led_classdev_unregister(&fsg_sata_led);
-+ led_classdev_unregister(&fsg_usb_led);
-+ led_classdev_unregister(&fsg_sync_led);
-+ led_classdev_unregister(&fsg_ring_led);
-+
-+ return 0;
-+}
-+
-+
-+static struct platform_driver fsg_led_driver = {
-+ .probe = fsg_led_probe,
-+ .remove = fsg_led_remove,
-+#ifdef CONFIG_PM
-+ .suspend = fsg_led_suspend,
-+ .resume = fsg_led_resume,
-+#endif
-+ .driver = {
-+ .name = "fsg-led",
-+ },
-+};
-+
-+
-+static int __init fsg_led_init(void)
-+{
-+ return platform_driver_register(&fsg_led_driver);
-+}
-+
-+static void __exit fsg_led_exit(void)
-+{
-+ platform_driver_unregister(&fsg_led_driver);
-+}
-+
-+
-+module_init(fsg_led_init);
-+module_exit(fsg_led_exit);
-+
-+MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
-+MODULE_DESCRIPTION("Freecom FSG-3 LED driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ixp4xx/patches-2.6.24/031-nslu2_nas100d_ethernet_support.patch b/target/linux/ixp4xx/patches-2.6.24/031-nslu2_nas100d_ethernet_support.patch
deleted file mode 100644
index f9e74c43fb..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/031-nslu2_nas100d_ethernet_support.patch
+++ /dev/null
@@ -1,232 +0,0 @@
-From af66bd3b3324d51f0c43b7672b7a0563db425377 Mon Sep 17 00:00:00 2001
-From: Rod Whitby <rod@whitby.id.au>
-Date: Tue, 29 Jan 2008 10:03:19 +1030
-Subject: ixp4xx: Ethernet support for the nslu2 and nas100d boards
-
-Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig.
-
-Sets up the corresponding platform data for the nslu2 and nas100d
-boards, and reads the ethernet MAC address from the internal flash.
-
-Tested on both little-endian and big-endian kernels.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-Signed-off-by: Michael Westerhof <mwester@dls.net>
-Tested-by: Tom King <tom@websb.net>
-
-PATCH FOLLOWS
-KernelVersion: v2.6.24-1916-g3832564
-
-Index: linux-2.6.24.7/arch/arm/configs/ixp4xx_defconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/configs/ixp4xx_defconfig
-+++ linux-2.6.24.7/arch/arm/configs/ixp4xx_defconfig
-@@ -1,7 +1,7 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.24-rc8
--# Wed Jan 23 17:26:16 2008
-+# Linux kernel version: 2.6.24
-+# Sun Jan 27 07:33:38 2008
- #
- CONFIG_ARM=y
- CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-@@ -174,6 +174,8 @@ CONFIG_MACH_GTWX5715=y
- #
- CONFIG_DMABOUNCE=y
- # CONFIG_IXP4XX_INDIRECT_PCI is not set
-+CONFIG_IXP4XX_QMGR=y
-+CONFIG_IXP4XX_NPE=y
-
- #
- # Boot options
-@@ -832,6 +834,7 @@ CONFIG_DUMMY=y
- # CONFIG_PHYLIB is not set
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
-+CONFIG_IXP4XX_ETH=y
- # CONFIG_AX88796 is not set
- # CONFIG_HAPPYMEAL is not set
- # CONFIG_SUNGEM is not set
-@@ -925,6 +928,7 @@ CONFIG_HDLC_X25=m
- # CONFIG_PC300TOO is not set
- # CONFIG_FARSYNC is not set
- # CONFIG_DSCC4 is not set
-+# CONFIG_IXP4XX_HSS is not set
- CONFIG_DLCI=m
- CONFIG_DLCI_MAX=8
- CONFIG_WAN_ROUTER_DRIVERS=m
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -12,6 +12,7 @@
- *
- */
-
-+#include <linux/if_ether.h>
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-@@ -22,6 +23,7 @@
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-+#include <asm/io.h>
-
- static struct flash_platform_data nas100d_flash_data = {
- .map_name = "cfi_probe",
-@@ -131,10 +133,28 @@ static struct platform_device nas100d_ua
- .resource = nas100d_uart_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info nas100d_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device nas100d_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = nas100d_plat_eth,
-+ }
-+};
-+
- static struct platform_device *nas100d_devices[] __initdata = {
- &nas100d_i2c_gpio,
- &nas100d_flash,
- &nas100d_leds,
-+ &nas100d_eth[0],
- };
-
- static void nas100d_power_off(void)
-@@ -150,6 +170,10 @@ static void nas100d_power_off(void)
-
- static void __init nas100d_init(void)
- {
-+ DECLARE_MAC_BUF(mac_buf);
-+ uint8_t __iomem *f;
-+ int i;
-+
- ixp4xx_sys_init();
-
- /* gpio 14 and 15 are _not_ clocks */
-@@ -172,6 +196,25 @@ static void __init nas100d_init(void)
- (void)platform_device_register(&nas100d_uart);
-
- platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC address.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-+ if (f) {
-+ for (i = 0; i < 6; i++)
-+#ifdef __ARMEB__
-+ nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
-+#else
-+ nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + (i^3));
-+#endif
-+ iounmap(f);
-+ }
-+ printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n",
-+ print_mac(mac_buf, nas100d_plat_eth[0].hwaddr));
-+
- }
-
- MACHINE_START(NAS100D, "Iomega NAS 100d")
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -14,6 +14,7 @@
- * Changed to conform to new style __init ixdp425 kas11 10/22/04
- */
-
-+#include <linux/if_ether.h>
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-@@ -25,6 +26,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/mach/time.h>
-+#include <asm/io.h>
-
- static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
-@@ -143,11 +145,29 @@ static struct platform_device nslu2_uart
- .resource = nslu2_uart_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info nslu2_plat_eth[] = {
-+ {
-+ .phy = 1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device nslu2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = nslu2_plat_eth,
-+ }
-+};
-+
- static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_gpio,
- &nslu2_flash,
- &nslu2_beeper,
- &nslu2_leds,
-+ &nslu2_eth[0],
- };
-
- static void nslu2_power_off(void)
-@@ -176,6 +196,10 @@ static struct sys_timer nslu2_timer = {
-
- static void __init nslu2_init(void)
- {
-+ DECLARE_MAC_BUF(mac_buf);
-+ uint8_t __iomem *f;
-+ int i;
-+
- ixp4xx_sys_init();
-
- nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -195,6 +219,26 @@ static void __init nslu2_init(void)
- (void)platform_device_register(&nslu2_uart);
-
- platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC address.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
-+ if (f) {
-+ for (i = 0; i < 6; i++)
-+#ifdef __ARMEB__
-+ nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
-+#else
-+ nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3));
-+#endif
-+ iounmap(f);
-+ }
-+ printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n",
-+ print_mac(mac_buf, nslu2_plat_eth[0].hwaddr));
-+
- }
-
- MACHINE_START(NSLU2, "Linksys NSLU2")
diff --git a/target/linux/ixp4xx/patches-2.6.24/032-subsume_power_files.patch b/target/linux/ixp4xx/patches-2.6.24/032-subsume_power_files.patch
deleted file mode 100644
index b32d055ad7..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/032-subsume_power_files.patch
+++ /dev/null
@@ -1,819 +0,0 @@
-From: Rod Whitby <rod@whitby.id.au>
-Subject: ixp4xx: Merge nslu2-power.c into nslu2-setup.c (Patch #4807)
-
-There is no reason to have power control in a separate file from the
-board setup code. Merge it back into the board setup file, removing
-superfluous header includes and removing superfluous constants from
-the machine header file.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
---
-PATCH FOLLOWS
-KernelVersion: v2.6.24-1917-gaf66bd3
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -24,9 +24,9 @@ obj-$(CONFIG_MACH_AVILA) += avila-setup.
- obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
--obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
--obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
-+obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
-+obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-power.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-power.c
-+++ /dev/null
-@@ -1,92 +0,0 @@
--/*
-- * arch/arm/mach-ixp4xx/nslu2-power.c
-- *
-- * NSLU2 Power/Reset driver
-- *
-- * Copyright (C) 2005 Tower Technologies
-- *
-- * based on nslu2-io.c
-- * Copyright (C) 2004 Karen Spearel
-- *
-- * Author: Alessandro Zummo <a.zummo@towertech.it>
-- * Maintainers: http://www.nslu2-linux.org/
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- */
--
--#include <linux/module.h>
--#include <linux/reboot.h>
--#include <linux/irq.h>
--#include <linux/interrupt.h>
--#include <linux/reboot.h>
--
--#include <asm/mach-types.h>
--
--static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
--{
-- /* Signal init to do the ctrlaltdel action, this will bypass init if
-- * it hasn't started and do a kernel_restart.
-- */
-- ctrl_alt_del();
--
-- return IRQ_HANDLED;
--}
--
--static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
--{
-- /* This is the paper-clip reset, it shuts the machine down directly.
-- */
-- machine_power_off();
--
-- return IRQ_HANDLED;
--}
--
--static int __init nslu2_power_init(void)
--{
-- if (!(machine_is_nslu2()))
-- return 0;
--
-- *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */
--
-- set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
-- set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
--
-- if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
-- IRQF_DISABLED, "NSLU2 reset button", NULL) < 0) {
--
-- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-- NSLU2_RB_IRQ);
--
-- return -EIO;
-- }
--
-- if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
-- IRQF_DISABLED, "NSLU2 power button", NULL) < 0) {
--
-- printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-- NSLU2_PB_IRQ);
--
-- return -EIO;
-- }
--
-- return 0;
--}
--
--static void __exit nslu2_power_exit(void)
--{
-- if (!(machine_is_nslu2()))
-- return;
--
-- free_irq(NSLU2_RB_IRQ, NULL);
-- free_irq(NSLU2_PB_IRQ, NULL);
--}
--
--module_init(nslu2_power_init);
--module_exit(nslu2_power_exit);
--
--MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
--MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
--MODULE_LICENSE("GPL");
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -3,22 +3,26 @@
- *
- * NSLU2 board-setup
- *
-- * based ixdp425-setup.c:
-+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
-+ *
-+ * based on ixdp425-setup.c:
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ * based on nslu2-power.c:
-+ * Copyright (C) 2005 Tower Technologies
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Author: Rod Whitby <rod@whitby.id.au>
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
-- * Fixed missing init_time in MACHINE_START kas11 10/22/04
-- * Changed to conform to new style __init ixdp425 kas11 10/22/04
- */
-
- #include <linux/if_ether.h>
--#include <linux/kernel.h>
-+#include <linux/irq.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/reboot.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-
-@@ -27,6 +31,7 @@
- #include <asm/mach/flash.h>
- #include <asm/mach/time.h>
- #include <asm/io.h>
-+#include <asm/gpio.h>
-
- static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
-@@ -181,6 +186,25 @@ static void nslu2_power_off(void)
- gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
-+static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
-+{
-+ /* Signal init to do the ctrlaltdel action, this will bypass init if
-+ * it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly.
-+ */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
- static void __init nslu2_timer_init(void)
- {
- /* The xtal on this machine is non-standard. */
-@@ -206,8 +230,6 @@ static void __init nslu2_init(void)
- nslu2_flash_resource.end =
- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-- pm_power_off = nslu2_power_off;
--
- i2c_register_board_info(0, nslu2_i2c_board_info,
- ARRAY_SIZE(nslu2_i2c_board_info));
-
-@@ -220,6 +242,23 @@ static void __init nslu2_init(void)
-
- platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-
-+ pm_power_off = nslu2_power_off;
-+
-+ if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
-+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
-+ "NSLU2 reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ gpio_to_irq(NSLU2_RB_GPIO));
-+ }
-+
-+ if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
-+ IRQF_DISABLED | IRQF_TRIGGER_HIGH,
-+ "NSLU2 power button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+ gpio_to_irq(NSLU2_PB_GPIO));
-+ }
-
- /*
- * Map in a portion of the flash and read the MAC address.
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/nslu2.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/nslu2.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/nslu2.h
-@@ -39,34 +39,17 @@
-
- /* Buttons */
-
--#define NSLU2_PB_GPIO 5
-+#define NSLU2_PB_GPIO 5 /* power button */
- #define NSLU2_PO_GPIO 8 /* power off */
--#define NSLU2_RB_GPIO 12
--
--#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
--#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
--
--#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO)
--#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO)
--#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO)
-+#define NSLU2_RB_GPIO 12 /* reset button */
-
- /* Buzzer */
-
- #define NSLU2_GPIO_BUZZ 4
--#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-
- /* LEDs */
-
- #define NSLU2_LED_RED_GPIO 0
- #define NSLU2_LED_GRN_GPIO 1
--
--#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO)
--#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO)
--
- #define NSLU2_LED_DISK1_GPIO 3
- #define NSLU2_LED_DISK2_GPIO 2
--
--#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO)
--#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO)
--
--
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-power.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-power.c
-+++ /dev/null
-@@ -1,128 +0,0 @@
--/*
-- * arch/arm/mach-ixp4xx/nas100d-power.c
-- *
-- * NAS 100d Power/Reset driver
-- *
-- * Copyright (C) 2005 Tower Technologies
-- *
-- * based on nas100d-io.c
-- * Copyright (C) 2004 Karen Spearel
-- *
-- * Author: Alessandro Zummo <a.zummo@towertech.it>
-- * Maintainers: http://www.nslu2-linux.org/
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- */
--
--#include <linux/interrupt.h>
--#include <linux/irq.h>
--#include <linux/module.h>
--#include <linux/reboot.h>
--#include <linux/jiffies.h>
--#include <linux/timer.h>
--
--#include <asm/gpio.h>
--#include <asm/mach-types.h>
--
--/* This is used to make sure the power-button pusher is serious. The button
-- * must be held until the value of this counter reaches zero.
-- */
--static int power_button_countdown;
--
--/* Must hold the button down for at least this many counts to be processed */
--#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
--
--static void nas100d_power_handler(unsigned long data);
--static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
--
--static void nas100d_power_handler(unsigned long data)
--{
-- /* This routine is called twice per second to check the
-- * state of the power button.
-- */
--
-- if (gpio_get_value(NAS100D_PB_GPIO)) {
--
-- /* IO Pin is 1 (button pushed) */
-- if (power_button_countdown > 0)
-- power_button_countdown--;
--
-- } else {
--
-- /* Done on button release, to allow for auto-power-on mods. */
-- if (power_button_countdown == 0) {
-- /* Signal init to do the ctrlaltdel action,
-- * this will bypass init if it hasn't started
-- * and do a kernel_restart.
-- */
-- ctrl_alt_del();
--
-- /* Change the state of the power LED to "blink" */
-- gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-- } else {
-- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-- }
-- }
--
-- mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
--}
--
--static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
--{
-- /* This is the paper-clip reset, it shuts the machine down directly. */
-- machine_power_off();
--
-- return IRQ_HANDLED;
--}
--
--static int __init nas100d_power_init(void)
--{
-- if (!(machine_is_nas100d()))
-- return 0;
--
-- set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
--
-- if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
-- IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
--
-- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-- gpio_to_irq(NAS100D_RB_GPIO));
--
-- return -EIO;
-- }
--
-- /* The power button on the Iomega NAS100d is on GPIO 14, but
-- * it cannot handle interrupts on that GPIO line. So we'll
-- * have to poll it with a kernel timer.
-- */
--
-- /* Make sure that the power button GPIO is set up as an input */
-- gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
--
-- /* Set the initial value for the power button IRQ handler */
-- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
--
-- mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
--
-- return 0;
--}
--
--static void __exit nas100d_power_exit(void)
--{
-- if (!(machine_is_nas100d()))
-- return;
--
-- del_timer_sync(&nas100d_power_timer);
--
-- free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
--}
--
--module_init(nas100d_power_init);
--module_exit(nas100d_power_exit);
--
--MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
--MODULE_DESCRIPTION("NAS100D Power/Reset driver");
--MODULE_LICENSE("GPL");
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -3,8 +3,14 @@
- *
- * NAS 100d board-setup
- *
-- * based ixdp425-setup.c:
-+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
-+ *
-+ * based on ixdp425-setup.c:
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ * based on nas100d-power.c:
-+ * Copyright (C) 2005 Tower Technologies
-+ * based on nas100d-io.c
-+ * Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Author: Rod Whitby <rod@whitby.id.au>
-@@ -13,10 +19,13 @@
- */
-
- #include <linux/if_ether.h>
--#include <linux/kernel.h>
-+#include <linux/irq.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/reboot.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-
-@@ -24,6 +33,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/io.h>
-+#include <asm/gpio.h>
-
- static struct flash_platform_data nas100d_flash_data = {
- .map_name = "cfi_probe",
-@@ -168,6 +178,57 @@ static void nas100d_power_off(void)
- gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
-+/* This is used to make sure the power-button pusher is serious. The button
-+ * must be held until the value of this counter reaches zero.
-+ */
-+static int power_button_countdown;
-+
-+/* Must hold the button down for at least this many counts to be processed */
-+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-+
-+static void nas100d_power_handler(unsigned long data);
-+static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
-+
-+static void nas100d_power_handler(unsigned long data)
-+{
-+ /* This routine is called twice per second to check the
-+ * state of the power button.
-+ */
-+
-+ if (gpio_get_value(NAS100D_PB_GPIO)) {
-+
-+ /* IO Pin is 1 (button pushed) */
-+ if (power_button_countdown > 0)
-+ power_button_countdown--;
-+
-+ } else {
-+
-+ /* Done on button release, to allow for auto-power-on mods. */
-+ if (power_button_countdown == 0) {
-+ /* Signal init to do the ctrlaltdel action,
-+ * this will bypass init if it hasn't started
-+ * and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ /* Change the state of the power LED to "blink" */
-+ gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-+ } else {
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+ }
-+ }
-+
-+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-+}
-+
-+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly. */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
- static void __init nas100d_init(void)
- {
- DECLARE_MAC_BUF(mac_buf);
-@@ -183,8 +244,6 @@ static void __init nas100d_init(void)
- nas100d_flash_resource.end =
- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-- pm_power_off = nas100d_power_off;
--
- i2c_register_board_info(0, nas100d_i2c_board_info,
- ARRAY_SIZE(nas100d_i2c_board_info));
-
-@@ -197,6 +256,29 @@ static void __init nas100d_init(void)
-
- platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
-
-+ pm_power_off = nas100d_power_off;
-+
-+ if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
-+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
-+ "NAS100D reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ gpio_to_irq(NAS100D_RB_GPIO));
-+ }
-+
-+ /* The power button on the Iomega NAS100d is on GPIO 14, but
-+ * it cannot handle interrupts on that GPIO line. So we'll
-+ * have to poll it with a kernel timer.
-+ */
-+
-+ /* Make sure that the power button GPIO is set up as an input */
-+ gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Set the initial value for the power button IRQ handler */
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+
-+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-+
- /*
- * Map in a portion of the flash and read the MAC address.
- * Since it is stored in BE in the flash itself, we need to
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-power.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-power.c
-+++ /dev/null
-@@ -1,129 +0,0 @@
--/*
-- * arch/arm/mach-ixp4xx/dsmg600-power.c
-- *
-- * DSM-G600 Power/Reset driver
-- * Author: Michael Westerhof <mwester@dls.net>
-- *
-- * Based on nslu2-power.c
-- * Copyright (C) 2005 Tower Technologies
-- * Author: Alessandro Zummo <a.zummo@towertech.it>
-- *
-- * which was based on nslu2-io.c
-- * Copyright (C) 2004 Karen Spearel
-- *
-- * Maintainers: http://www.nslu2-linux.org/
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- */
--
--#include <linux/module.h>
--#include <linux/reboot.h>
--#include <linux/interrupt.h>
--#include <linux/irq.h>
--#include <linux/jiffies.h>
--#include <linux/timer.h>
--
--#include <asm/gpio.h>
--#include <asm/mach-types.h>
--
--/* This is used to make sure the power-button pusher is serious. The button
-- * must be held until the value of this counter reaches zero.
-- */
--static int power_button_countdown;
--
--/* Must hold the button down for at least this many counts to be processed */
--#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
--
--static void dsmg600_power_handler(unsigned long data);
--static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
--
--static void dsmg600_power_handler(unsigned long data)
--{
-- /* This routine is called twice per second to check the
-- * state of the power button.
-- */
--
-- if (gpio_get_value(DSMG600_PB_GPIO)) {
--
-- /* IO Pin is 1 (button pushed) */
-- if (power_button_countdown > 0)
-- power_button_countdown--;
--
-- } else {
--
-- /* Done on button release, to allow for auto-power-on mods. */
-- if (power_button_countdown == 0) {
-- /* Signal init to do the ctrlaltdel action,
-- * this will bypass init if it hasn't started
-- * and do a kernel_restart.
-- */
-- ctrl_alt_del();
--
-- /* Change the state of the power LED to "blink" */
-- gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-- } else {
-- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-- }
-- }
--
-- mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
--}
--
--static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
--{
-- /* This is the paper-clip reset, it shuts the machine down directly. */
-- machine_power_off();
--
-- return IRQ_HANDLED;
--}
--
--static int __init dsmg600_power_init(void)
--{
-- if (!(machine_is_dsmg600()))
-- return 0;
--
-- if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-- IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
-- NULL) < 0) {
--
-- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-- gpio_to_irq(DSMG600_RB_GPIO));
--
-- return -EIO;
-- }
--
-- /* The power button on the D-Link DSM-G600 is on GPIO 15, but
-- * it cannot handle interrupts on that GPIO line. So we'll
-- * have to poll it with a kernel timer.
-- */
--
-- /* Make sure that the power button GPIO is set up as an input */
-- gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
--
-- /* Set the initial value for the power button IRQ handler */
-- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
--
-- mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
--
-- return 0;
--}
--
--static void __exit dsmg600_power_exit(void)
--{
-- if (!(machine_is_dsmg600()))
-- return;
--
-- del_timer_sync(&dsmg600_power_timer);
--
-- free_irq(gpio_to_irq(DSMG600_RB_GPIO), NULL);
--}
--
--module_init(dsmg600_power_init);
--module_exit(dsmg600_power_exit);
--
--MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
--MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
--MODULE_LICENSE("GPL");
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -1,20 +1,29 @@
- /*
- * DSM-G600 board-setup
- *
-+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- * Copyright (C) 2006 Tower Technologies
-- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
-- * based ixdp425-setup.c:
-+ * based on ixdp425-setup.c:
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ * based on nslu2-power.c:
-+ * Copyright (C) 2005 Tower Technologies
-+ * based on nslu2-io.c:
-+ * Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Author: Michael Westerhof <mwester@dls.net>
-+ * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainers: http://www.nslu2-linux.org/
- */
-
--#include <linux/kernel.h>
-+#include <linux/irq.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/reboot.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-
-@@ -22,6 +31,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/mach/time.h>
-+#include <asm/gpio.h>
-
- static struct flash_platform_data dsmg600_flash_data = {
- .map_name = "cfi_probe",
-@@ -140,6 +150,57 @@ static void dsmg600_power_off(void)
- gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
-+/* This is used to make sure the power-button pusher is serious. The button
-+ * must be held until the value of this counter reaches zero.
-+ */
-+static int power_button_countdown;
-+
-+/* Must hold the button down for at least this many counts to be processed */
-+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-+
-+static void dsmg600_power_handler(unsigned long data);
-+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
-+
-+static void dsmg600_power_handler(unsigned long data)
-+{
-+ /* This routine is called twice per second to check the
-+ * state of the power button.
-+ */
-+
-+ if (gpio_get_value(DSMG600_PB_GPIO)) {
-+
-+ /* IO Pin is 1 (button pushed) */
-+ if (power_button_countdown > 0)
-+ power_button_countdown--;
-+
-+ } else {
-+
-+ /* Done on button release, to allow for auto-power-on mods. */
-+ if (power_button_countdown == 0) {
-+ /* Signal init to do the ctrlaltdel action,
-+ * this will bypass init if it hasn't started
-+ * and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ /* Change the state of the power LED to "blink" */
-+ gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-+ } else {
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+ }
-+ }
-+
-+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-+}
-+
-+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly. */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
- static void __init dsmg600_timer_init(void)
- {
- /* The xtal on this machine is non-standard. */
-@@ -164,8 +225,6 @@ static void __init dsmg600_init(void)
- dsmg600_flash_resource.end =
- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-- pm_power_off = dsmg600_power_off;
--
- i2c_register_board_info(0, dsmg600_i2c_board_info,
- ARRAY_SIZE(dsmg600_i2c_board_info));
-
-@@ -176,6 +235,29 @@ static void __init dsmg600_init(void)
- (void)platform_device_register(&dsmg600_uart);
-
- platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
-+
-+ pm_power_off = dsmg600_power_off;
-+
-+ if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
-+ "DSM-G600 reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ gpio_to_irq(DSMG600_RB_GPIO));
-+ }
-+
-+ /* The power button on the D-Link DSM-G600 is on GPIO 15, but
-+ * it cannot handle interrupts on that GPIO line. So we'll
-+ * have to poll it with a kernel timer.
-+ */
-+
-+ /* Make sure that the power button GPIO is set up as an input */
-+ gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Set the initial value for the power button IRQ handler */
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+
-+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
- }
-
- MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/target/linux/ixp4xx/patches-2.6.24/033-velocity_be.patch b/target/linux/ixp4xx/patches-2.6.24/033-velocity_be.patch
deleted file mode 100644
index 854de9e76c..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/033-velocity_be.patch
+++ /dev/null
@@ -1,899 +0,0 @@
-Index: linux-2.6.24.7/drivers/net/via-velocity.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/via-velocity.c
-+++ linux-2.6.24.7/drivers/net/via-velocity.c
-@@ -254,11 +254,31 @@ MODULE_AUTHOR("VIA Networking Technologi
- MODULE_LICENSE("GPL");
- MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
-
-+/* Valid values for vdebug (additive, this is a bitmask):
-+ * 0x00 => off
-+ * 0x01 => always on
-+ * 0x02 => additional detail on tx (rx, too, if anyone implements same)
-+ * 0x04 => detail the initialization process
-+ * 0x08 => spot debug detail; to be used as developers see fit
-+ */
-+static int vdebug = 0;
-+
-+/* HAIL - these macros are for the normal 0x01-type tracing... */
-+#define HAIL(S) \
-+ if (vdebug&1) printk(KERN_NOTICE "%s\n", (S));
-+#define HAILS(S,T) \
-+ if (vdebug&1) printk(KERN_NOTICE "%s -> status=0x%x\n", (S), (T));
-+
- #define VELOCITY_PARAM(N,D) \
- static int N[MAX_UNITS]=OPTION_DEFAULT;\
- module_param_array(N, int, NULL, 0); \
- MODULE_PARM_DESC(N, D);
-
-+#define VELO_DEBUG_MIN 0
-+#define VELO_DEBUG_MAX 255
-+#define VELO_DEBUG_DEF 0
-+VELOCITY_PARAM(velo_debug, "Debug level");
-+
- #define RX_DESC_MIN 64
- #define RX_DESC_MAX 255
- #define RX_DESC_DEF 64
-@@ -557,12 +577,12 @@ static void __devinit velocity_set_bool_
- if (val == -1)
- *opt |= (def ? flag : 0);
- else if (val < 0 || val > 1) {
-- printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
-- devname, name);
-+ printk(KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (0-1)\n",
-+ name);
- *opt |= (def ? flag : 0);
- } else {
-- printk(KERN_INFO "%s: set parameter %s to %s\n",
-- devname, name, val ? "TRUE" : "FALSE");
-+ printk(KERN_INFO "via-velocity: set parameter %s to %s\n",
-+ name, val ? "TRUE" : "FALSE");
- *opt |= (val ? flag : 0);
- }
- }
-@@ -580,6 +600,7 @@ static void __devinit velocity_set_bool_
- static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname)
- {
-
-+ velocity_set_int_opt(&opts->velo_debug, velo_debug[index], VELO_DEBUG_MIN, VELO_DEBUG_MAX, VELO_DEBUG_DEF, "velo_debug", devname);
- velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
- velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
- velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
-@@ -593,6 +614,7 @@ static void __devinit velocity_get_optio
- velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
- velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname);
- opts->numrx = (opts->numrx & ~3);
-+ vdebug = opts->velo_debug;
- }
-
- /**
-@@ -608,6 +630,8 @@ static void velocity_init_cam_filter(str
- struct mac_regs __iomem * regs = vptr->mac_regs;
- unsigned short vid;
-
-+ HAIL("velocity_init_cam_filter");
-+
- /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
- WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, &regs->MCFG);
- WORD_REG_BITS_ON(MCFG_VIDFR, &regs->MCFG);
-@@ -636,8 +660,10 @@ static void velocity_init_cam_filter(str
- } else {
- u16 temp = 0;
- mac_set_vlan_cam(regs, 0, (u8 *) &temp);
-- temp = 1;
-- mac_set_vlan_cam_mask(regs, (u8 *) &temp);
-+ /* temp = 1; BE */
-+ /* mac_set_vlan_cam_mask(regs, (u8 *) &temp); BE */
-+ vptr->vCAMmask[0] |= 1; /* BE */
-+ mac_set_vlan_cam_mask(regs, vptr->vCAMmask); /* BE */
- }
- }
-
-@@ -675,13 +701,15 @@ static void velocity_rx_reset(struct vel
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i;
-
-+ HAIL("velocity_rx_reset");
- vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
-
- /*
- * Init state, all RD entries belong to the NIC
- */
- for (i = 0; i < vptr->options.numrx; ++i)
-- vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC;
-+ /* vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; BE */
-+ vptr->rd_ring[i].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
-
- writew(vptr->options.numrx, &regs->RBRDU);
- writel(vptr->rd_pool_dma, &regs->RDBaseLo);
-@@ -704,12 +732,15 @@ static void velocity_init_registers(stru
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i, mii_status;
-
-+ if (vdebug&5) printk(KERN_NOTICE "velocity_init_registers: entering\n");
-+
- mac_wol_reset(regs);
-
- switch (type) {
- case VELOCITY_INIT_RESET:
- case VELOCITY_INIT_WOL:
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: RESET or WOL\n");
- netif_stop_queue(vptr->dev);
-
- /*
-@@ -737,12 +768,13 @@ static void velocity_init_registers(stru
-
- case VELOCITY_INIT_COLD:
- default:
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: COLD or default\n");
- /*
- * Do reset
- */
- velocity_soft_reset(vptr);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: soft reset complete.\n");
- mdelay(5);
--
- mac_eeprom_reload(regs);
- for (i = 0; i < 6; i++) {
- writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
-@@ -760,11 +792,16 @@ static void velocity_init_registers(stru
- */
- BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), &regs->CFGB);
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Initializing CAM filter\n");
- /*
- * Init CAM filter
- */
-+ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: about to init CAM filters\n");
-+ mdelay(5); /* MJW - ARM processors, kernel 2.6.19 - this fixes oopses and hangs */
- velocity_init_cam_filter(vptr);
-+ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: init CAM filters complete\n");
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Setting packet filter\n");
- /*
- * Set packet filter: Receive directed and broadcast address
- */
-@@ -774,10 +811,12 @@ static void velocity_init_registers(stru
- * Enable MII auto-polling
- */
- enable_mii_autopoll(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: enable_mii_autopoll complete.\n");
-
- vptr->int_mask = INT_MASK_DEF;
-
-- writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo);
-+ /* writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo); BE */
-+ writel((vptr->rd_pool_dma), &regs->RDBaseLo); /* BE */
- writew(vptr->options.numrx - 1, &regs->RDCSize);
- mac_rx_queue_run(regs);
- mac_rx_queue_wake(regs);
-@@ -785,10 +824,13 @@ static void velocity_init_registers(stru
- writew(vptr->options.numtx - 1, &regs->TDCSize);
-
- for (i = 0; i < vptr->num_txq; i++) {
-- writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i]));
-+ /* writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); BE */
-+ writel((vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); /* BE */
- mac_tx_queue_run(regs, i);
- }
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: DMA settings complete.\n");
-+
- init_flow_control_register(vptr);
-
- writel(CR0_STOP, &regs->CR0Clr);
-@@ -807,8 +849,10 @@ static void velocity_init_registers(stru
-
- enable_flow_control_ability(vptr);
- mac_hw_mibs_init(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Set interrupt mask\n");
- mac_write_int_mask(vptr->int_mask, regs);
- mac_clear_isr(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: complete.\n");
-
- }
- }
-@@ -826,6 +870,7 @@ static int velocity_soft_reset(struct ve
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i = 0;
-
-+ HAIL("velocity_soft_reset");
- writel(CR0_SFRST, &regs->CR0Set);
-
- for (i = 0; i < W_MAX_TIMEOUT; i++) {
-@@ -888,6 +933,7 @@ static int __devinit velocity_found1(str
- VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
- printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
- printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
-+ printk(KERN_INFO "BE support, misc. fixes MJW 01Jan2007 - may be unstable\n");
- first = 0;
- }
-
-@@ -1104,6 +1150,7 @@ static int velocity_init_rings(struct ve
- dma_addr_t pool_dma;
- u8 *pool;
-
-+ HAIL("velocity_init_rings");
- /*
- * Allocate all RD/TD rings a single pool
- */
-@@ -1166,6 +1213,7 @@ static int velocity_init_rings(struct ve
- static void velocity_free_rings(struct velocity_info *vptr)
- {
- int size;
-+ HAIL("velocity_free_rings");
-
- size = vptr->options.numrx * sizeof(struct rx_desc) +
- vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
-@@ -1182,6 +1230,7 @@ static inline void velocity_give_many_rx
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int avail, dirty, unusable;
-
-+ HAIL("velocity_give_many_rx_descs");
- /*
- * RD number must be equal to 4X per hardware spec
- * (programming guide rev 1.20, p.13)
-@@ -1195,7 +1244,8 @@ static inline void velocity_give_many_rx
- dirty = vptr->rd_dirty - unusable;
- for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
- dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
-- vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC;
-+ /* vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; BE */
-+ vptr->rd_ring[dirty].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
- }
-
- writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
-@@ -1205,12 +1255,14 @@ static inline void velocity_give_many_rx
- static int velocity_rx_refill(struct velocity_info *vptr)
- {
- int dirty = vptr->rd_dirty, done = 0, ret = 0;
-+ HAIL("velocity_rx_refill");
-
- do {
- struct rx_desc *rd = vptr->rd_ring + dirty;
-
- /* Fine for an all zero Rx desc at init time as well */
-- if (rd->rdesc0.owner == OWNED_BY_NIC)
-+ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
-+ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- if (!vptr->rd_info[dirty].skb) {
-@@ -1244,6 +1296,7 @@ static int velocity_init_rd_ring(struct
- int ret;
- int mtu = vptr->dev->mtu;
-
-+ HAIL("velocity_init_rd_ring");
- vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
-
- vptr->rd_info = kcalloc(vptr->options.numrx,
-@@ -1275,6 +1328,7 @@ static void velocity_free_rd_ring(struct
- {
- int i;
-
-+ HAIL("velocity_free_rd_ring");
- if (vptr->rd_info == NULL)
- return;
-
-@@ -1314,6 +1368,7 @@ static int velocity_init_td_ring(struct
- struct tx_desc *td;
- struct velocity_td_info *td_info;
-
-+ HAIL("velocity_init_td_ring");
- /* Init the TD ring entries */
- for (j = 0; j < vptr->num_txq; j++) {
- curr = vptr->td_pool_dma[j];
-@@ -1350,6 +1405,7 @@ static void velocity_free_td_ring_entry(
- struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
- int i;
-
-+ HAIL("velocity_free_td_ring_entry");
- if (td_info == NULL)
- return;
-
-@@ -1379,6 +1435,7 @@ static void velocity_free_td_ring(struct
- {
- int i, j;
-
-+ HAIL("velocity_free_td_ring");
- for (j = 0; j < vptr->num_txq; j++) {
- if (vptr->td_infos[j] == NULL)
- continue;
-@@ -1406,34 +1463,42 @@ static int velocity_rx_srv(struct veloci
- struct net_device_stats *stats = &vptr->stats;
- int rd_curr = vptr->rd_curr;
- int works = 0;
-+ u16 wRSR; /* BE */
-
-+ HAILS("velocity_rx_srv", status);
- do {
- struct rx_desc *rd = vptr->rd_ring + rd_curr;
-
- if (!vptr->rd_info[rd_curr].skb)
- break;
-
-- if (rd->rdesc0.owner == OWNED_BY_NIC)
-+ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
-+ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- rmb();
-
-+ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
- /*
- * Don't drop CE or RL error frame although RXOK is off
- */
-- if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) {
-+ /* if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { BE */
-+ if ((wRSR & RSR_RXOK) || (!(wRSR & RSR_RXOK) && (wRSR & (RSR_CE | RSR_RL)))) { /* BE */
- if (velocity_receive_frame(vptr, rd_curr) < 0)
- stats->rx_dropped++;
- } else {
-- if (rd->rdesc0.RSR & RSR_CRC)
-+ /* if (rd->rdesc0.RSR & RSR_CRC) BE */
-+ if (wRSR & RSR_CRC) /* BE */
- stats->rx_crc_errors++;
-- if (rd->rdesc0.RSR & RSR_FAE)
-+ /* if (rd->rdesc0.RSR & RSR_FAE) BE */
-+ if (wRSR & RSR_FAE) /* BE */
- stats->rx_frame_errors++;
-
- stats->rx_dropped++;
- }
-
-- rd->inten = 1;
-+ /* rd->inten = 1; BE */
-+ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
-
- vptr->dev->last_rx = jiffies;
-
-@@ -1464,13 +1529,21 @@ static int velocity_rx_srv(struct veloci
-
- static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
- {
-+ u8 bCSM;
-+ HAIL("velocity_rx_csum");
- skb->ip_summed = CHECKSUM_NONE;
-
-- if (rd->rdesc1.CSM & CSM_IPKT) {
-- if (rd->rdesc1.CSM & CSM_IPOK) {
-- if ((rd->rdesc1.CSM & CSM_TCPKT) ||
-- (rd->rdesc1.CSM & CSM_UDPKT)) {
-- if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
-+// if (rd->rdesc1.CSM & CSM_IPKT) {
-+// if (rd->rdesc1.CSM & CSM_IPOK) {
-+// if ((rd->rdesc1.CSM & CSM_TCPKT) ||
-+// (rd->rdesc1.CSM & CSM_UDPKT)) {
-+// if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
-+ bCSM = (u8)(cpu_to_le32(rd->rdesc1) >> 16); /* BE */
-+ if (bCSM & CSM_IPKT) {
-+ if (bCSM & CSM_IPOK) {
-+ if ((bCSM & CSM_TCPKT) ||
-+ (bCSM & CSM_UDPKT)) {
-+ if (!(bCSM & CSM_TUPOK)) { /* BE */
- return;
- }
- }
-@@ -1496,9 +1569,11 @@ static inline int velocity_rx_copy(struc
- {
- int ret = -1;
-
-+ HAIL("velocity_rx_copy");
- if (pkt_size < rx_copybreak) {
- struct sk_buff *new_skb;
-
-+ HAIL("velocity_rx_copy (working...)");
- new_skb = dev_alloc_skb(pkt_size + 2);
- if (new_skb) {
- new_skb->dev = vptr->dev;
-@@ -1529,10 +1604,12 @@ static inline int velocity_rx_copy(struc
- static inline void velocity_iph_realign(struct velocity_info *vptr,
- struct sk_buff *skb, int pkt_size)
- {
-+ HAIL("velocity_iph_realign");
- /* FIXME - memmove ? */
- if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
- int i;
-
-+ HAIL("velocity_iph_realign (working...)");
- for (i = pkt_size; i >= 0; i--)
- *(skb->data + i + 2) = *(skb->data + i);
- skb_reserve(skb, 2);
-@@ -1551,19 +1628,27 @@ static inline void velocity_iph_realign(
- static int velocity_receive_frame(struct velocity_info *vptr, int idx)
- {
- void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
-+ u16 pkt_len; /* BE */
-+ u16 wRSR; /* BE */
-+ struct sk_buff *skb;
- struct net_device_stats *stats = &vptr->stats;
- struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
- struct rx_desc *rd = &(vptr->rd_ring[idx]);
-- int pkt_len = rd->rdesc0.len;
-- struct sk_buff *skb;
-+ /* int pkt_len = rd->rdesc0.len BE */;
-+
-+ pkt_len = ((cpu_to_le32(rd->rdesc0) >> 16) & 0x00003FFFUL); /* BE */
-+ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
-
-- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
-+ HAIL("velocity_receive_frame");
-+ /* if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { BE */
-+ if (wRSR & (RSR_STP | RSR_EDP)) { /* BE */
- VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
- stats->rx_length_errors++;
- return -EINVAL;
- }
-
-- if (rd->rdesc0.RSR & RSR_MAR)
-+ /* if (rd->rdesc0.RSR & RSR_MAR) BE */
-+ if (wRSR & RSR_MAR) /* BE */
- vptr->stats.multicast++;
-
- skb = rd_info->skb;
-@@ -1576,7 +1661,8 @@ static int velocity_receive_frame(struct
- */
-
- if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
-- if (rd->rdesc0.RSR & RSR_RL) {
-+ /* if (rd->rdesc0.RSR & RSR_RL) { BE */
-+ if (wRSR & RSR_RL) { /* BE */
- stats->rx_length_errors++;
- return -EINVAL;
- }
-@@ -1620,6 +1706,7 @@ static int velocity_alloc_rx_buf(struct
- struct rx_desc *rd = &(vptr->rd_ring[idx]);
- struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
-
-+ HAIL("velocity_alloc_rx_buf");
- rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64);
- if (rd_info->skb == NULL)
- return -ENOMEM;
-@@ -1637,10 +1724,14 @@ static int velocity_alloc_rx_buf(struct
- */
-
- *((u32 *) & (rd->rdesc0)) = 0;
-- rd->len = cpu_to_le32(vptr->rx_buf_sz);
-- rd->inten = 1;
-+ /* rd->len = cpu_to_le32(vptr->rx_buf_sz); BE */
-+ /* rd->inten = 1; BE */
- rd->pa_low = cpu_to_le32(rd_info->skb_dma);
-- rd->pa_high = 0;
-+ /* rd->pa_high = 0; BE */
-+ rd->ltwo &= cpu_to_le32(0xC000FFFFUL); /* BE */
-+ rd->ltwo |= cpu_to_le32((vptr->rx_buf_sz << 16)); /* BE */
-+ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
-+ rd->ltwo &= cpu_to_le32(0xFFFF0000UL); /* BE */
- return 0;
- }
-
-@@ -1661,9 +1752,11 @@ static int velocity_tx_srv(struct veloci
- int full = 0;
- int idx;
- int works = 0;
-+ u16 wTSR; /* BE */
- struct velocity_td_info *tdinfo;
- struct net_device_stats *stats = &vptr->stats;
-
-+ HAILS("velocity_tx_srv", status);
- for (qnum = 0; qnum < vptr->num_txq; qnum++) {
- for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
- idx = (idx + 1) % vptr->options.numtx) {
-@@ -1674,22 +1767,29 @@ static int velocity_tx_srv(struct veloci
- td = &(vptr->td_rings[qnum][idx]);
- tdinfo = &(vptr->td_infos[qnum][idx]);
-
-- if (td->tdesc0.owner == OWNED_BY_NIC)
-+ /* if (td->tdesc0.owner == OWNED_BY_NIC) BE */
-+ if (td->tdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- if ((works++ > 15))
- break;
-
-- if (td->tdesc0.TSR & TSR0_TERR) {
-+ wTSR = (u16)cpu_to_le32(td->tdesc0);
-+ /* if (td->tdesc0.TSR & TSR0_TERR) { BE */
-+ if (wTSR & TSR0_TERR) { /* BE */
- stats->tx_errors++;
- stats->tx_dropped++;
-- if (td->tdesc0.TSR & TSR0_CDH)
-+ /* if (td->tdesc0.TSR & TSR0_CDH) BE */
-+ if (wTSR & TSR0_CDH) /* BE */
- stats->tx_heartbeat_errors++;
-- if (td->tdesc0.TSR & TSR0_CRS)
-+ /* if (td->tdesc0.TSR & TSR0_CRS) BE */
-+ if (wTSR & TSR0_CRS) /* BE */
- stats->tx_carrier_errors++;
-- if (td->tdesc0.TSR & TSR0_ABT)
-+ /* if (td->tdesc0.TSR & TSR0_ABT) BE */
-+ if (wTSR & TSR0_ABT) /* BE */
- stats->tx_aborted_errors++;
-- if (td->tdesc0.TSR & TSR0_OWC)
-+ /* if (td->tdesc0.TSR & TSR0_OWC) BE */
-+ if (wTSR & TSR0_OWC) /* BE */
- stats->tx_window_errors++;
- } else {
- stats->tx_packets++;
-@@ -1778,6 +1878,7 @@ static void velocity_print_link_status(s
-
- static void velocity_error(struct velocity_info *vptr, int status)
- {
-+ HAILS("velocity_error", status);
-
- if (status & ISR_TXSTLI) {
- struct mac_regs __iomem * regs = vptr->mac_regs;
-@@ -1867,6 +1968,7 @@ static void velocity_free_tx_buf(struct
- struct sk_buff *skb = tdinfo->skb;
- int i;
-
-+ HAIL("velocity_free_tx_buf");
- /*
- * Don't unmap the pre-allocated tx_bufs
- */
-@@ -2067,6 +2169,7 @@ static int velocity_xmit(struct sk_buff
- struct velocity_td_info *tdinfo;
- unsigned long flags;
- int index;
-+ u32 lbufsz; /* BE */
-
- int pktlen = skb->len;
-
-@@ -2083,9 +2186,18 @@ static int velocity_xmit(struct sk_buff
- td_ptr = &(vptr->td_rings[qnum][index]);
- tdinfo = &(vptr->td_infos[qnum][index]);
-
-- td_ptr->tdesc1.TCPLS = TCPLS_NORMAL;
-- td_ptr->tdesc1.TCR = TCR0_TIC;
-- td_ptr->td_buf[0].queue = 0;
-+ td_ptr->tdesc0 = 0x00000000UL; /* BE */
-+ td_ptr->tdesc1 = 0x00000000UL; /* BE */
-+
-+ /* td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0xfcffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)TCPLS_NORMAL) << 24); /* BE */
-+
-+ /* td_ptr->tdesc1.TCR = TCR0_TIC; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TIC); /* BE */
-+
-+ /* td_ptr->td_buf[0].queue = 0; BE */
-+ td_ptr->td_buf[0].ltwo &= cpu_to_le32(~BE_QUEUE_ENABLE); /* BE */
-
- /*
- * Pad short frames.
-@@ -2097,20 +2209,36 @@ static int velocity_xmit(struct sk_buff
- memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len);
- tdinfo->skb = skb;
- tdinfo->skb_dma[0] = tdinfo->buf_dma;
-- td_ptr->tdesc0.pktsize = pktlen;
-+ /* td_ptr->tdesc0.pktsize = pktlen; */
-+ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
-+ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
-+ lbufsz = lbufsz << 16; /* BE - shift over */
-+ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
-+
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-- td_ptr->td_buf[0].pa_high = 0;
-- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
-+ /* td_ptr->td_buf[0].pa_high = 0; */
-+ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; */
-+ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */
- tdinfo->nskb_dma = 1;
-- td_ptr->tdesc1.CMDZ = 2;
-+ /* td_ptr->tdesc1.CMDZ = 2; */
-+ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28); /* BE */
- } else
- #ifdef VELOCITY_ZERO_COPY_SUPPORT
-+ /*
-+ * BE - NOTE on the VELOCITY_ZERO_COPY_SUPPORT:
-+ * This block of code has NOT been patched up for BE support, as
-+ * it is certainly broken -- if it compiles at all. Since the BE
-+ * fixes depend on the broken code, attempts to convert to BE support
-+ * would almost certainly confuse more than help.
-+ */
- if (skb_shinfo(skb)->nr_frags > 0) {
- int nfrags = skb_shinfo(skb)->nr_frags;
- tdinfo->skb = skb;
- if (nfrags > 6) {
- skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
- tdinfo->skb_dma[0] = tdinfo->buf_dma;
-+ /* BE: Er, exactly what value are we assigning in this next line? */
- td_ptr->tdesc0.pktsize =
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
- td_ptr->td_buf[0].pa_high = 0;
-@@ -2127,6 +2255,7 @@ static int velocity_xmit(struct sk_buff
- /* FIXME: support 48bit DMA later */
- td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
- td_ptr->td_buf[i].pa_high = 0;
-+ /* BE: This next line can't be right: */
- td_ptr->td_buf[i].bufsize = skb->len->skb->data_len;
-
- for (i = 0; i < nfrags; i++) {
-@@ -2144,7 +2273,7 @@ static int velocity_xmit(struct sk_buff
- }
-
- } else
--#endif
-+#endif /* (broken) VELOCITY_ZERO_COPY_SUPPORT */
- {
- /*
- * Map the linear network buffer into PCI space and
-@@ -2152,19 +2281,29 @@ static int velocity_xmit(struct sk_buff
- */
- tdinfo->skb = skb;
- tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
-- td_ptr->tdesc0.pktsize = pktlen;
-+ /* td_ptr->tdesc0.pktsize = pktlen; BE */
-+ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
-+ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
-+ lbufsz = lbufsz << 16; /* BE */
-+ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-- td_ptr->td_buf[0].pa_high = 0;
-- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
-+ /* td_ptr->td_buf[0].pa_high = 0; BE */
-+ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; BE */
-+ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */
- tdinfo->nskb_dma = 1;
-- td_ptr->tdesc1.CMDZ = 2;
-+ /* td_ptr->tdesc1.CMDZ = 2; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28); /* BE */
- }
-
- if (vptr->vlgrp && vlan_tx_tag_present(skb)) {
-- td_ptr->tdesc1.pqinf.VID = vlan_tx_tag_get(skb);
-- td_ptr->tdesc1.pqinf.priority = 0;
-- td_ptr->tdesc1.pqinf.CFI = 0;
-- td_ptr->tdesc1.TCR |= TCR0_VETAG;
-+ /* td_ptr->tdesc1.pqinf.VID = vlan_tx_tag_get(skb); BE */
-+ /* td_ptr->tdesc1.pqinf.priority = 0; BE */
-+ /* td_ptr->tdesc1.pqinf.CFI = 0; BE */
-+ /* td_ptr->tdesc1.TCR |= TCR0_VETAG; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0xFFFF0000UL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(vlan_tx_tag_get(skb)); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_VETAG); /* BE */
- }
-
- /*
-@@ -2174,26 +2313,34 @@ static int velocity_xmit(struct sk_buff
- && (skb->ip_summed == CHECKSUM_PARTIAL)) {
- const struct iphdr *ip = ip_hdr(skb);
- if (ip->protocol == IPPROTO_TCP)
-- td_ptr->tdesc1.TCR |= TCR0_TCPCK;
-+ /* td_ptr->tdesc1.TCR |= TCR0_TCPCK; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TCPCK); /* BE */
- else if (ip->protocol == IPPROTO_UDP)
-- td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
-- td_ptr->tdesc1.TCR |= TCR0_IPCK;
-- }
-+ /* td_ptr->tdesc1.TCR |= (TCR0_UDPCK); BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_UDPCK); /* BE */
-+ /* td_ptr->tdesc1.TCR |= TCR0_IPCK; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_IPCK); /* BE */
-+ }
- {
-
- int prev = index - 1;
-
- if (prev < 0)
- prev = vptr->options.numtx - 1;
-- td_ptr->tdesc0.owner = OWNED_BY_NIC;
-+ /* td_ptr->tdesc0.owner = OWNED_BY_NIC; BE */
-+ td_ptr->tdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
- vptr->td_used[qnum]++;
- vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
-
- if (AVAIL_TD(vptr, qnum) < 1)
- netif_stop_queue(dev);
-
-- td_ptr = &(vptr->td_rings[qnum][prev]);
-- td_ptr->td_buf[0].queue = 1;
-+ td_ptr = &(vptr->td_rings[qnum][prev]);
-+ /* td_ptr->td_buf[0].queue = 1; BE */
-+ td_ptr->td_buf[0].ltwo |= cpu_to_le32(BE_QUEUE_ENABLE); /* BE */
-+ if (vdebug&2) printk(KERN_NOTICE "velocity_xmit: (%s) len=%d idx=%d tdesc0=0x%x tdesc1=0x%x ltwo=0x%x\n",
-+ (pktlen<ETH_ZLEN) ? "short" : "normal", pktlen, index,
-+ td_ptr->tdesc0, td_ptr->tdesc1, td_ptr->td_buf[0].ltwo);
- mac_tx_queue_wake(vptr->mac_regs, qnum);
- }
- dev->trans_start = jiffies;
-@@ -2219,7 +2366,7 @@ static int velocity_intr(int irq, void *
- u32 isr_status;
- int max_count = 0;
-
--
-+ HAIL("velocity_intr");
- spin_lock(&vptr->lock);
- isr_status = mac_read_isr(vptr->mac_regs);
-
-@@ -2238,7 +2385,10 @@ static int velocity_intr(int irq, void *
-
- while (isr_status != 0) {
- mac_write_isr(vptr->mac_regs, isr_status);
-- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
-+ HAILS("velocity_intr",isr_status);
-+ /* MJW - velocity_error is ALWAYS called; need to mask off some other flags */
-+ /* if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) */
-+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI | ISR_PTX0I | ISR_ISR0)))
- velocity_error(vptr, isr_status);
- if (isr_status & (ISR_PRXI | ISR_PPRXI))
- max_count += velocity_rx_srv(vptr, isr_status);
-@@ -2276,6 +2426,7 @@ static void velocity_set_multi(struct ne
- int i;
- struct dev_mc_list *mclist;
-
-+ HAIL("velocity_set_multi");
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- writel(0xffffffff, &regs->MARCAM[0]);
- writel(0xffffffff, &regs->MARCAM[4]);
-@@ -2319,6 +2470,7 @@ static struct net_device_stats *velocity
- {
- struct velocity_info *vptr = netdev_priv(dev);
-
-+ HAIL("net_device_stats");
- /* If the hardware is down, don't touch MII */
- if(!netif_running(dev))
- return &vptr->stats;
-@@ -2363,6 +2515,7 @@ static int velocity_ioctl(struct net_dev
- struct velocity_info *vptr = netdev_priv(dev);
- int ret;
-
-+ HAIL("velocity_ioctl");
- /* If we are asked for information and the device is power
- saving then we need to bring the device back up to talk to it */
-
-@@ -2581,6 +2734,8 @@ static int velocity_mii_read(struct mac_
- {
- u16 ww;
-
-+ HAIL("velocity_mii_read");
-+ HAIL("velocity_mii_write");
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
-Index: linux-2.6.24.7/drivers/net/via-velocity.h
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/via-velocity.h
-+++ linux-2.6.24.7/drivers/net/via-velocity.h
-@@ -196,64 +196,70 @@
- * Receive descriptor
- */
-
--struct rdesc0 {
-- u16 RSR; /* Receive status */
-- u16 len:14; /* Received packet length */
-- u16 reserved:1;
-- u16 owner:1; /* Who owns this buffer ? */
--};
--
--struct rdesc1 {
-- u16 PQTAG;
-- u8 CSM;
-- u8 IPKT;
--};
-+//struct rdesc0 {
-+// u16 RSR; /* Receive status */
-+// u16 len:14; /* Received packet length */
-+// u16 reserved:1;
-+// u16 owner:1; /* Who owns this buffer ? */
-+//};
-+
-+//struct rdesc1 {
-+// u16 PQTAG;
-+// u8 CSM;
-+// u8 IPKT;
-+//};
-
- struct rx_desc {
-- struct rdesc0 rdesc0;
-- struct rdesc1 rdesc1;
-+// struct rdesc0 rdesc0;
-+// struct rdesc1 rdesc1;
-+ u32 rdesc0;
-+ u32 rdesc1;
- u32 pa_low; /* Low 32 bit PCI address */
-- u16 pa_high; /* Next 16 bit PCI address (48 total) */
-- u16 len:15; /* Frame size */
-- u16 inten:1; /* Enable interrupt */
-+// u16 pa_high; /* Next 16 bit PCI address (48 total) */
-+// u16 len:15; /* Frame size */
-+// u16 inten:1; /* Enable interrupt */
-+ u32 ltwo;
- } __attribute__ ((__packed__));
-
- /*
- * Transmit descriptor
- */
-
--struct tdesc0 {
-- u16 TSR; /* Transmit status register */
-- u16 pktsize:14; /* Size of frame */
-- u16 reserved:1;
-- u16 owner:1; /* Who owns the buffer */
--};
--
--struct pqinf { /* Priority queue info */
-- u16 VID:12;
-- u16 CFI:1;
-- u16 priority:3;
--} __attribute__ ((__packed__));
--
--struct tdesc1 {
-- struct pqinf pqinf;
-- u8 TCR;
-- u8 TCPLS:2;
-- u8 reserved:2;
-- u8 CMDZ:4;
--} __attribute__ ((__packed__));
-+//struct tdesc0 {
-+// u16 TSR; /* Transmit status register */
-+// u16 pktsize:14; /* Size of frame */
-+// u16 reserved:1;
-+// u16 owner:1; /* Who owns the buffer */
-+//};
-+
-+//struct pqinf { /* Priority queue info */
-+// u16 VID:12;
-+// u16 CFI:1;
-+// u16 priority:3;
-+//} __attribute__ ((__packed__));
-+
-+//struct tdesc1 {
-+// struct pqinf pqinf;
-+// u8 TCR;
-+// u8 TCPLS:2;
-+// u8 reserved:2;
-+// u8 CMDZ:4;
-+//} __attribute__ ((__packed__));
-
- struct td_buf {
- u32 pa_low;
-- u16 pa_high;
-- u16 bufsize:14;
-- u16 reserved:1;
-- u16 queue:1;
-+// u16 pa_high;
-+// u16 bufsize:14;
-+// u16 reserved:1;
-+// u16 queue:1;
-+ u32 ltwo;
- } __attribute__ ((__packed__));
-
- struct tx_desc {
-- struct tdesc0 tdesc0;
-- struct tdesc1 tdesc1;
-+// struct tdesc0 tdesc0;
-+// struct tdesc1 tdesc1;
-+ u32 tdesc0;
-+ u32 tdesc1;
- struct td_buf td_buf[7];
- };
-
-@@ -279,6 +285,16 @@ enum velocity_owner {
- OWNED_BY_NIC = 1
- };
-
-+/* Constants added for the BE fixes */
-+#define BE_OWNED_BY_NIC 0x80000000UL
-+#define BE_INT_ENABLE 0x80000000UL
-+#define BE_QUEUE_ENABLE 0x80000000UL
-+#define BE_TCR_TIC 0x00800000UL
-+#define BE_TCR_VETAG 0x00200000UL
-+#define BE_TCR_TCPCK 0x00040000UL
-+#define BE_TCR_UDPCK 0x00080000UL
-+#define BE_TCR_IPCK 0x00100000UL
-+
-
- /*
- * MAC registers and macros.
-@@ -1512,6 +1528,7 @@ enum velocity_flow_cntl_type {
- };
-
- struct velocity_opt {
-+ int velo_debug; /* debug flag */
- int numrx; /* Number of RX descriptors */
- int numtx; /* Number of TX descriptors */
- enum speed_opt spd_dpx; /* Media link mode */
diff --git a/target/linux/ixp4xx/patches-2.6.24/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-2.6.24/090-increase_entropy_pools.patch
deleted file mode 100644
index 4c8e553aeb..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/090-increase_entropy_pools.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Index: linux-2.6.24.7/drivers/char/random.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/char/random.c
-+++ linux-2.6.24.7/drivers/char/random.c
-@@ -248,9 +248,9 @@
- /*
- * Configuration information
- */
--#define INPUT_POOL_WORDS 128
--#define OUTPUT_POOL_WORDS 32
--#define SEC_XFER_SIZE 512
-+#define INPUT_POOL_WORDS 256
-+#define OUTPUT_POOL_WORDS 64
-+#define SEC_XFER_SIZE 1024
-
- /*
- * The minimum number of bits of entropy before we wake up a read on
diff --git a/target/linux/ixp4xx/patches-2.6.24/100-gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/100-gateway7001_mac_plat_info.patch
deleted file mode 100644
index 770923926d..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/100-gateway7001_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device gateway700
- .resource = &gateway7001_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info gateway7001_plat_eth[] = {
-+ {
-+ .phy = 1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 2,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device gateway7001_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = gateway7001_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = gateway7001_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
-- &gateway7001_uart
-+ &gateway7001_uart,
-+ &gateway7001_eth[0],
-+ &gateway7001_eth[1],
- };
-
- static void __init gateway7001_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/101-wg302_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/101-wg302_mac_plat_info.patch
deleted file mode 100644
index 971ac35957..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/101-wg302_mac_plat_info.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v2-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -77,9 +77,27 @@ static struct platform_device wg302v2_ua
- .resource = &wg302v2_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wg302_plat_eth[] = {
-+ {
-+ .phy = 8,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302_plat_eth,
-+ }
-+};
-+
- static struct platform_device *wg302v2_devices[] __initdata = {
- &wg302v2_flash,
- &wg302v2_uart,
-+ &wg302_eth[0],
- };
-
- static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch b/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch
deleted file mode 100644
index 7b49a769ea..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/110-pronghorn_metro_support.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -57,6 +57,14 @@ config MACH_WG302V2
- WG302 v2 or WAG302 v2 Access Points. For more information
- on this platform, see http://openwrt.org
-
-+config MACH_PRONGHORNMETRO
-+ bool "Pronghorn Metro"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Pronghorn Metro Platform. For more
-+ information on this platform, see <file:Documentation/arm/IXP4xx>.
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -16,6 +16,7 @@ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg6
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
-+obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-
- obj-y += common.o
-
-@@ -30,5 +31,6 @@ obj-$(CONFIG_MACH_DSMG600) += dsmg6
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
-+obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
-@@ -0,0 +1,74 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Pronghorn Metro
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init pronghornmetro_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO4;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 16)
-+ return IRQ_IXP4XX_GPIO1;
-+ else return -1;
-+}
-+
-+struct hw_pci pronghornmetro_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = pronghornmetro_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = pronghornmetro_map_irq,
-+};
-+
-+int __init pronghornmetro_pci_init(void)
-+{
-+ if (machine_is_pronghorn_metro())
-+ pci_common_init(&pronghornmetro_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(pronghornmetro_pci_init);
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -0,0 +1,147 @@
-+/*
-+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+ *
-+ * Board setup for the ADI Engineering Pronghorn Metro
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data pronghornmetro_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource pronghornmetro_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device pronghornmetro_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghornmetro_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghornmetro_flash_resource,
-+};
-+
-+static struct resource pronghornmetro_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port pronghornmetro_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device pronghornmetro_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = pronghornmetro_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghornmetro_uart_resource,
-+};
-+
-+static struct resource pronghornmetro_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO0,
-+ .end = IRQ_IXP4XX_GPIO0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data pronghornmetro_pata_data = {
-+ .cs0_bits = 0xbfff0043,
-+ .cs1_bits = 0xbfff0043,
-+};
-+
-+static struct platform_device pronghornmetro_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &pronghornmetro_pata_data,
-+ .num_resources = ARRAY_SIZE(pronghornmetro_pata_resources),
-+ .resource = pronghornmetro_pata_resources,
-+};
-+
-+static struct platform_device *pronghornmetro_devices[] __initdata = {
-+ &pronghornmetro_flash,
-+ &pronghornmetro_uart,
-+};
-+
-+static void __init pronghornmetro_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
-+
-+ pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&pronghornmetro_pata);
-+}
-+
-+#ifdef CONFIG_MACH_PRONGHORNMETRO
-+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = pronghornmetro_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.24.7/Documentation/arm/IXP4xx
-===================================================================
---- linux-2.6.24.7.orig/Documentation/arm/IXP4xx
-+++ linux-2.6.24.7/Documentation/arm/IXP4xx
-@@ -111,6 +111,9 @@ http://www.adiengineering.com/productsCo
- the platform has two mini-PCI slots used for 802.11[bga] cards.
- Finally, there is an IDE port hanging off the expansion bus.
-
-+ADI Engineering Pronghorn Metro Platform
-+http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
-+
- Gateworks Avila Network Platform
- http://www.gateworks.com/avila_sbc.htm
-
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_set
- * Some boards are using UART2 as console
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-- machine_is_gateway7001() || machine_is_wg302v2())
-+ machine_is_gateway7001() || machine_is_wg302v2() ||
-+ machine_is_pronghorn_metro())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.24/111-pronghorn_metro_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/111-pronghorn_metro_mac_plat_info.patch
deleted file mode 100644
index 2a82c92317..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/111-pronghorn_metro_mac_plat_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -104,9 +104,36 @@ static struct platform_device pronghornm
- .resource = pronghornmetro_pata_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info pronghornmetro_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device pronghornmetro_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = pronghornmetro_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = pronghornmetro_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *pronghornmetro_devices[] __initdata = {
- &pronghornmetro_flash,
- &pronghornmetro_uart,
-+ &pronghornmetro_eth[0],
-+ &pronghornmetro_eth[1],
- };
-
- static void __init pronghornmetro_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch
deleted file mode 100644
index 9dd5fe7855..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/120-compex_support.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
- Engineering Pronghorn Metro Platform. For more
- information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_COMPEX
-+ bool "Compex WP18 / NP18A"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Compex'
-+ WP18 or NP18A boards. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-+obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -32,5 +33,6 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gatewa
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -0,0 +1,120 @@
-+/*
-+ * arch/arm/mach-ixp4xx/compex-setup.c
-+ *
-+ * Ccompex WP18 / NP18A board-setup
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data compex_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource compex_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device compex_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &compex_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &compex_flash_resource,
-+};
-+
-+static struct resource compex_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port compex_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device compex_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = compex_uart_data,
-+ .num_resources = 2,
-+ .resource = compex_uart_resources,
-+};
-+
-+static struct platform_device *compex_devices[] __initdata = {
-+ &compex_flash,
-+ &compex_uart
-+};
-+
-+static void __init compex_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ compex_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
-+}
-+
-+#ifdef CONFIG_MACH_COMPEX
-+MACHINE_START(COMPEX, "Compex WP18 / NP18A")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = compex_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465() || machine_is_kixrp435())
-+ machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
-Index: linux-2.6.24.7/arch/arm/tools/mach-types
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/tools/mach-types
-+++ linux-2.6.24.7/arch/arm/tools/mach-types
-@@ -1276,7 +1276,7 @@ oiab MACH_OIAB OIAB 1269
- smdk6400 MACH_SMDK6400 SMDK6400 1270
- nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
- greenphone MACH_GREENPHONE GREENPHONE 1272
--compex42x MACH_COMPEXWP18 COMPEXWP18 1273
-+compex MACH_COMPEX COMPEX 1273
- xmate MACH_XMATE XMATE 1274
- energizer MACH_ENERGIZER ENERGIZER 1275
- ime1 MACH_IME1 IME1 1276
diff --git a/target/linux/ixp4xx/patches-2.6.24/121-compex_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/121-compex_mac_plat_info.patch
deleted file mode 100644
index 915fdcc00b..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/121-compex_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/compex-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -90,9 +90,36 @@ static struct platform_device compex_uar
- .resource = compex_uart_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info compex_plat_eth[] = {
-+ {
-+ .phy = -1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 3,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device compex_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = compex_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = compex_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *compex_devices[] __initdata = {
- &compex_flash,
-- &compex_uart
-+ &compex_uart,
-+ &compex_eth[0],
-+ &compex_eth[1],
- };
-
- static void __init compex_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch
deleted file mode 100644
index 59d94dc1d8..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/130-wrt300nv2_support.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -73,6 +73,14 @@ config MACH_COMPEX
- WP18 or NP18A boards. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_WRT300NV2
-+ bool "Linksys WRT300N v2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys'
-+ WRT300N v2 router. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-
- obj-y += common.o
-
-@@ -34,5 +35,6 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-@@ -0,0 +1,65 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
-+ *
-+ * PCI setup routines for Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wrt300nv2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci wrt300nv2_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wrt300nv2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wrt300nv2_map_irq,
-+};
-+
-+int __init wrt300nv2_pci_init(void)
-+{
-+ if (machine_is_wrt300nv2())
-+ pci_common_init(&wrt300nv2_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wrt300nv2_pci_init);
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+ *
-+ * Board setup for the Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wrt300nv2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wrt300nv2_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wrt300nv2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wrt300nv2_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_flash_resource,
-+};
-+
-+static struct resource wrt300nv2_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wrt300nv2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wrt300nv2_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_uart_resource,
-+};
-+
-+static struct platform_device *wrt300nv2_devices[] __initdata = {
-+ &wrt300nv2_flash,
-+ &wrt300nv2_uart
-+};
-+
-+static void __init wrt300nv2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WRT300NV2
-+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wrt300nv2_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -42,7 +42,7 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_pronghorn_metro())
-+ machine_is_pronghorn_metro() || machine_is_wrt300nv2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.24/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/131-wrt300nv2_mac_plat_info.patch
deleted file mode 100644
index 8fb2b61b1d..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/131-wrt300nv2_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device wrt300nv2_
- .resource = &wrt300nv2_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wrt300nv2_plat_eth[] = {
-+ {
-+ .phy = -1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device wrt300nv2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wrt300nv2_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = wrt300nv2_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *wrt300nv2_devices[] __initdata = {
- &wrt300nv2_flash,
-- &wrt300nv2_uart
-+ &wrt300nv2_uart,
-+ &wrt300nv2_eth[0],
-+ &wrt300nv2_eth[1],
- };
-
- static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/140-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.24/140-sidewinder_support.patch
deleted file mode 100644
index ed86422c75..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/140-sidewinder_support.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
- Engineering Pronghorn Metro Platform. For more
- information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_SIDEWINDER
-+ bool "Sidewinder"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Sidewinder Platform. For more
-+ information on this platform, see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_COMPEX
- bool "Compex WP18 / NP18A"
- select PCI
-@@ -163,7 +171,7 @@ config MACH_FSG
- #
- config CPU_IXP46X
- bool
-- depends on MACH_IXDP465
-+ depends on MACH_IXDP465 || MACH_SIDEWINDER
- default y
-
- config CPU_IXP43X
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-+obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-
- obj-y += common.o
-
-@@ -36,5 +37,6 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-+obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/sidewinder-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/sidewinder-pci.c
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init sidewinder_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init sidewinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else return -1;
-+}
-+
-+struct hw_pci sidewinder_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = sidewinder_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = sidewinder_map_irq,
-+};
-+
-+int __init sidewinder_pci_init(void)
-+{
-+ if (machine_is_sidewinder())
-+ pci_common_init(&sidewinder_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(sidewinder_pci_init);
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/sidewinder-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,115 @@
-+/*
-+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
-+ *
-+ * Board setup for the ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data sidewinder_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource sidewinder_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device sidewinder_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &sidewinder_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &sidewinder_flash_resource,
-+};
-+
-+static struct resource sidewinder_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port sidewinder_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device sidewinder_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = sidewinder_uart_data,
-+ },
-+ .num_resources = ARRAY_SIZE(sidewinder_uart_resources),
-+ .resource = sidewinder_uart_resources,
-+};
-+
-+static struct platform_device *sidewinder_devices[] __initdata = {
-+ &sidewinder_flash,
-+ &sidewinder_uart,
-+};
-+
-+static void __init sidewinder_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
-+}
-+
-+#ifdef CONFIG_MACH_SIDEWINDER
-+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = sidewinder_init,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-2.6.24/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.24/150-lanready_ap1000_support.patch
deleted file mode 100644
index aae2669bf2..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/150-lanready_ap1000_support.patch
+++ /dev/null
@@ -1,208 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ap1000-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,151 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap1000-setup.c
-+ *
-+ * Lanready AP-1000
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data ap1000_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource ap1000_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device ap1000_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ap1000_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap1000_flash_resource,
-+};
-+
-+static struct resource ap1000_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port ap1000_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device ap1000_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = ap1000_uart_data,
-+ .num_resources = 2,
-+ .resource = ap1000_uart_resources
-+};
-+
-+static struct platform_device *ap1000_devices[] __initdata = {
-+ &ap1000_flash,
-+ &ap1000_uart
-+};
-+
-+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init ap1000_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init ap1000_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ap1000_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP1000
-+MACHINE_START(AP1000, "Lanready AP-1000")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = ap1000_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = ap1000_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,8 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
-+ machine_is_ixdp465() || machine_is_kixrp435() ||
-+ machine_is_compex() || machine_is_ap1000())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,14 @@ config MACH_WRT300NV2
- WRT300N v2 router. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_AP1000
-+ bool "Lanready AP-1000"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Lanready's
-+ AP1000 board. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) +=
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-+obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -38,5 +39,6 @@ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pro
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-+obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
diff --git a/target/linux/ixp4xx/patches-2.6.24/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/151-lanready_ap1000_mac_plat_info.patch
deleted file mode 100644
index 6178b5f2e3..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/151-lanready_ap1000_mac_plat_info.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ap1000-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -90,9 +90,37 @@ static struct platform_device ap1000_uar
- .resource = ap1000_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ap1000_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 5,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ap1000_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ap1000_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ap1000_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *ap1000_devices[] __initdata = {
- &ap1000_flash,
-- &ap1000_uart
-+ &ap1000_uart,
-+ &ap1000_eth[0],
-+ &ap1000_eth[1],
- };
-
- static char ap1000_mem_fixup[] __initdata = "mem=64M ";
diff --git a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch
deleted file mode 100644
index 72bea002c3..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/160-wg302v1_support.patch
+++ /dev/null
@@ -1,221 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
-+config MACH_WG302V1
-+ bool "Netgear WG302 v1 / WAG302 v1"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Netgear's
-+ WG302 v1 or WAG302 v1 Access Points. For more information
-+ on this platform, see http://openwrt.org
-+
- config MACH_WG302V2
- bool "Netgear WG302 v2 / WAG302 v2"
- select PCI
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-pci.c
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
-+ *
-+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init wg302v1_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else return -1;
-+}
-+
-+struct hw_pci wg302v1_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wg302v1_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wg302v1_map_irq,
-+};
-+
-+int __init wg302v1_pci_init(void)
-+{
-+ if (machine_is_wg302v1())
-+ pci_common_init(&wg302v1_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wg302v1_pci_init);
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,109 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
-+ *
-+ * Board setup for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wg302v1_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wg302v1_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wg302v1_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wg302v1_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v1_flash_resource,
-+};
-+
-+static struct resource wg302v1_uart_resource = {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wg302v1_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wg302v1_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wg302v1_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v1_uart_resource,
-+};
-+
-+static struct platform_device *wg302v1_devices[] __initdata = {
-+ &wg302v1_flash,
-+ &wg302v1_uart,
-+};
-+
-+static void __init wg302v1_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WG302V1
-+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wg302v1_init,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-2.6.24/161-wg302v1_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/161-wg302v1_mac_plat_info.patch
deleted file mode 100644
index 2d56cc8847..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/161-wg302v1_mac_plat_info.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -77,9 +77,27 @@ static struct platform_device wg302v1_ua
- .resource = &wg302v1_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wg302_plat_eth[] = {
-+ {
-+ .phy = 30,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302_plat_eth,
-+ }
-+};
-+
- static struct platform_device *wg302v1_devices[] __initdata = {
- &wg302v1_flash,
- &wg302v1_uart,
-+ &wg302_eth[0],
- };
-
- static void __init wg302v1_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.24/162-wg302v1_mem_fixup.patch
deleted file mode 100644
index 5c8024a0e1..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/162-wg302v1_mem_fixup.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -100,6 +100,36 @@ static struct platform_device *wg302v1_d
- &wg302_eth[0],
- };
-
-+static char wg302v1_mem_fixup[] __initdata = "mem=32M ";
-+
-+static void __init wg302v1_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(wg302v1_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, wg302v1_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(wg302v1_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(wg302v1_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init wg302v1_init(void)
- {
- ixp4xx_sys_init();
-@@ -118,6 +148,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1
- /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .fixup = wg302v1_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches-2.6.24/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/170-ixdpg425_mac_plat_info.patch
deleted file mode 100644
index 9026870287..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/170-ixdpg425_mac_plat_info.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/coyote-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/coyote-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -73,9 +73,37 @@ static struct platform_device coyote_uar
- .resource = &coyote_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdpg425_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 4,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ixdpg425_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ixdpg425_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ixdpg425_plat_eth + 1,
-+ }
-+};
-+
-+
- static struct platform_device *coyote_devices[] __initdata = {
- &coyote_flash,
-- &coyote_uart
-+ &coyote_uart,
-+ &ixdpg425_eth[0],
-+ &ixdpg425_eth[1],
- };
-
- static void __init coyote_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.24/180-tw5334_support.patch
deleted file mode 100644
index a8c24f4e14..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/180-tw5334_support.patch
+++ /dev/null
@@ -1,293 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -150,6 +150,14 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW5334
-+ bool "Titan Wireless TW-533-4"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW533-4. For more information on this platform,
-+ see http://openwrt.org
-+
- config MACH_NAS100D
- bool
- prompt "NAS100D"
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-
- obj-y += common.o
-
-@@ -42,5 +43,6 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/tw5334-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -0,0 +1,162 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw5334-setup.c
-+ *
-+ * Board setup for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data tw5334_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw5334_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw5334_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw5334_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_flash_resource,
-+};
-+
-+static struct resource tw5334_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port tw5334_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw5334_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = tw5334_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_uart_resource,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw5334_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw5334_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw5334_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw5334_plat_eth + 1,
-+ }
-+};
-+
-+static struct platform_device *tw5334_devices[] __initdata = {
-+ &tw5334_flash,
-+ &tw5334_uart,
-+ &tw5334_eth[0],
-+ &tw5334_eth[1],
-+};
-+
-+static void __init tw5334_init(void)
-+{
-+ DECLARE_MAC_BUF(mac_buf);
-+ uint8_t __iomem *f;
-+ int i;
-+
-+ ixp4xx_sys_init();
-+
-+ tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC addresses.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-+ if (f) {
-+ for (i = 0; i < 6; i++)
-+#ifdef __ARMEB__
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
-+#else
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
-+#endif
-+ iounmap(f);
-+ }
-+ printk(KERN_INFO "TW-533-4: Using MAC address %s for port 0\n",
-+ print_mac(mac_buf, tw5334_plat_eth[0].hwaddr));
-+ printk(KERN_INFO "TW-533-4: Using MAC address %s for port 1\n",
-+ print_mac(mac_buf, tw5334_plat_eth[1].hwaddr));
-+}
-+
-+#ifdef CONFIG_MACH_TW5334
-+MACHINE_START(TW5334, "Titan Wireless TW-533-4")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = tw5334_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/tw5334-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/tw5334-pci.c
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arch/mach-ixp4xx/tw5334-pci.c
-+ *
-+ * PCI setup routines for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init tw5334_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO2, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO0, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw5334_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 12)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 13)
-+ return IRQ_IXP4XX_GPIO2;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO1;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO0;
-+ else return -1;
-+}
-+
-+struct hw_pci tw5334_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw5334_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = tw5334_map_irq,
-+};
-+
-+int __init tw5334_pci_init(void)
-+{
-+ if (machine_is_tw5334())
-+ pci_common_init(&tw5334_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw5334_pci_init);
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_pronghorn_metro() || machine_is_wrt300nv2())
-+ machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
-+ machine_is_tw5334())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-2.6.24/190-cambria_support.patch b/target/linux/ixp4xx/patches-2.6.24/190-cambria_support.patch
deleted file mode 100644
index 9c8d0e07e7..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/190-cambria_support.patch
+++ /dev/null
@@ -1,395 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -25,6 +25,14 @@ config MACH_AVILA
- Avila Network Platform. For more information on this platform,
- see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_CAMBRIA
-+ bool "Cambria"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Gateworks
-+ Cambria series. For more information on this platform,
-+ see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_LOFT
- bool "Loft"
- depends on MACH_AVILA
-@@ -200,7 +208,7 @@ config CPU_IXP46X
-
- config CPU_IXP43X
- bool
-- depends on MACH_KIXRP435
-+ depends on MACH_KIXRP435 || MACH_CAMBRIA
- default y
-
- config MACH_GTWX5715
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n :=
-
- obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
-+obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
- obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
- obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
- obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
-@@ -28,6 +29,7 @@ obj-y += common.o
-
- obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA) += avila-setup.o
-+obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
- obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/cambria-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/cambria-pci.c
-@@ -0,0 +1,74 @@
-+/*
-+ * arch/arch/mach-ixp4xx/cambria-pci.c
-+ *
-+ * PCI setup routines for Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init cambria_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init cambria_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else if (slot == 4)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci cambria_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = cambria_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = cambria_map_irq,
-+};
-+
-+int __init cambria_pci_init(void)
-+{
-+ if (machine_is_cambria())
-+ pci_common_init(&cambria_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(cambria_pci_init);
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/cambria-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,250 @@
-+/*
-+ * arch/arm/mach-ixp4xx/cambria-setup.c
-+ *
-+ * Board setup for the Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#ifdef CONFIG_SENSORS_EEPROM
-+# include <linux/i2c.h>
-+# include <linux/eeprom.h>
-+#endif
-+
-+#include <linux/i2c-gpio.h>
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data cambria_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource cambria_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device cambria_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
-+ .sda_pin = 7,
-+ .scl_pin = 6,
-+};
-+
-+static struct platform_device cambria_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_data,
-+ },
-+};
-+
-+static struct resource cambria_uart_resource = {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port cambria_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = cambria_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_uart_resource,
-+};
-+
-+static struct resource cambria_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO12,
-+ .end = IRQ_IXP4XX_GPIO12,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data cambria_pata_data = {
-+ .cs0_bits = 0xbfff3c03,
-+ .cs1_bits = 0xbfff3c03,
-+};
-+
-+static struct platform_device cambria_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &cambria_pata_data,
-+ .num_resources = ARRAY_SIZE(cambria_pata_resources),
-+ .resource = cambria_pata_resources,
-+};
-+
-+static struct eth_plat_info cambria_plat_eth[] = {
-+ {
-+ .phy = 2,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, {
-+ .phy = 1,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+ }
-+};
-+
-+static struct platform_device cambria_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = cambria_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = cambria_plat_eth + 1,
-+ }
-+};
-+
-+#ifdef CONFIG_LEDS_IXP4XX
-+static struct platform_device cambria_leds_pld = {
-+ .name = "IXP4XX-PLD-LED",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+static struct platform_device cambria_leds_mem = {
-+ .name = "IXP4XX-MEM-LED",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+#endif
-+
-+static struct platform_device *cambria_devices[] __initdata = {
-+ &cambria_i2c_gpio,
-+ &cambria_flash,
-+ &cambria_uart,
-+#ifdef CONFIG_LEDS_IXP4XX
-+ &cambria_leds_pld,
-+ &cambria_leds_mem,
-+#endif
-+ &cambria_eth[0],
-+ &cambria_eth[1],
-+};
-+
-+#ifdef CONFIG_SENSORS_EEPROM
-+static int cambria_eeprom_do(struct notifier_block *self, unsigned long event, void *t)
-+{
-+ struct eeprom_data *data = t;
-+ struct sockaddr address;
-+ struct net_device * netdev;
-+
-+ char macs[12];
-+
-+ /* The MACs are the first 12 bytes in the eeprom at address 0x51 */
-+ if (event == EEPROM_REGISTER && data->client.addr == 0x51) {
-+ data->attr->read(&data->client.dev.kobj, data->attr, macs, 0, 12);
-+ /* eth0 */
-+ memcpy(address.sa_data, macs, ETH_ALEN);
-+ memcpy(&cambria_plat_eth[0].hwaddr, macs, ETH_ALEN);
-+ if ( (netdev = dev_get_by_name(&init_net, "eth0")) )
-+ netdev->set_mac_address(netdev, &address);
-+
-+ /* eth1 */
-+ memcpy(address.sa_data, macs + ETH_ALEN, ETH_ALEN);
-+ memcpy(&cambria_plat_eth[1].hwaddr, macs + ETH_ALEN, ETH_ALEN);
-+ if ( (netdev = dev_get_by_name(&init_net, "eth1")) )
-+ netdev->set_mac_address(netdev, &address);
-+ }
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block cambria_eeprom_notifier = {
-+ .notifier_call = cambria_eeprom_do
-+};
-+#endif
-+
-+static void __init cambria_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+#ifdef CONFIG_SENSORS_EEPROM
-+ register_eeprom_notifier(&cambria_eeprom_notifier);
-+#endif
-+
-+ cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(cambria_devices, ARRAY_SIZE(cambria_devices));
-+
-+ cambria_pata_resources[0].start = 0x53e00000;
-+ cambria_pata_resources[0].end = 0x53e3ffff;
-+
-+ cambria_pata_resources[1].start = 0x53e40000;
-+ cambria_pata_resources[1].end = 0x53e7ffff;
-+
-+ cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+ platform_device_register(&cambria_pata);
-+}
-+
-+#ifdef CONFIG_MACH_CAMBRIA
-+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = cambria_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -18,7 +18,7 @@
- #define __ASM_ARCH_HARDWARE_H__
-
- #define PCIBIOS_MIN_IO 0x00001000
--#define PCIBIOS_MIN_MEM (cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
-+#define PCIBIOS_MIN_MEM (cpu_is_ixp43x() ? 0x48000000 : 0x48000000)
-
- /*
- * We override the standard dma-mask routines for bouncing.
diff --git a/target/linux/ixp4xx/patches-2.6.24/200-npe_driver.patch b/target/linux/ixp4xx/patches-2.6.24/200-npe_driver.patch
deleted file mode 100644
index 97ff757e03..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/200-npe_driver.patch
+++ /dev/null
@@ -1,4036 +0,0 @@
-Index: linux-2.6.24.7/drivers/net/arm/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/arm/Kconfig
-+++ linux-2.6.24.7/drivers/net/arm/Kconfig
-@@ -47,3 +47,13 @@ config EP93XX_ETH
- help
- This is a driver for the ethernet hardware included in EP93xx CPUs.
- Say Y if you are building a kernel for EP93xx based devices.
-+
-+config IXP4XX_ETH
-+ tristate "IXP4xx Ethernet support"
-+ depends on NET_ETHERNET && ARM && ARCH_IXP4XX
-+ select IXP4XX_NPE
-+ select IXP4XX_QMGR
-+ select MII
-+ help
-+ Say Y here if you want to use built-in Ethernet ports
-+ on IXP4xx processor.
-Index: linux-2.6.24.7/drivers/net/arm/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/arm/Makefile
-+++ linux-2.6.24.7/drivers/net/arm/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
- obj-$(CONFIG_ARM_ETHER1) += ether1.o
- obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
- obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
-+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
-Index: linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-@@ -0,0 +1,1261 @@
-+/*
-+ * Intel IXP4xx Ethernet driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ *
-+ * Ethernet port config (0x00 is not present on IXP42X):
-+ *
-+ * logical port 0x00 0x10 0x20
-+ * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C)
-+ * physical PortId 2 0 1
-+ * TX queue 23 24 25
-+ * RX-free queue 26 27 28
-+ * TX-done queue is always 31, per-port RX and TX-ready queues are configurable
-+ *
-+ *
-+ * Queue entries:
-+ * bits 0 -> 1 - NPE ID (RX and TX-done)
-+ * bits 0 -> 2 - priority (TX, per 802.1D)
-+ * bits 3 -> 4 - port ID (user-set?)
-+ * bits 5 -> 31 - physical descriptor address
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/etherdevice.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/mii.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/npe.h>
-+#include <asm/arch/qmgr.h>
-+
-+#define DEBUG_QUEUES 0
-+#define DEBUG_DESC 0
-+#define DEBUG_RX 0
-+#define DEBUG_TX 0
-+#define DEBUG_PKT_BYTES 0
-+#define DEBUG_MDIO 0
-+#define DEBUG_CLOSE 0
-+
-+#define DRV_NAME "ixp4xx_eth"
-+
-+#define MAX_NPES 3
-+
-+#define RX_DESCS 64 /* also length of all RX queues */
-+#define TX_DESCS 16 /* also length of all TX queues */
-+#define TXDONE_QUEUE_LEN 64 /* dwords */
-+
-+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define REGS_SIZE 0x1000
-+#define MAX_MRU 1536 /* 0x600 */
-+
-+#define MDIO_INTERVAL (3 * HZ)
-+#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */
-+#define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */
-+#define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */
-+
-+#define NPE_ID(port_id) ((port_id) >> 4)
-+#define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3)
-+#define TX_QUEUE(port_id) (NPE_ID(port_id) + 23)
-+#define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26)
-+#define TXDONE_QUEUE 31
-+
-+#define ETH_NAPI_WEIGHT 16
-+
-+/* TX Control Registers */
-+#define TX_CNTRL0_TX_EN 0x01
-+#define TX_CNTRL0_HALFDUPLEX 0x02
-+#define TX_CNTRL0_RETRY 0x04
-+#define TX_CNTRL0_PAD_EN 0x08
-+#define TX_CNTRL0_APPEND_FCS 0x10
-+#define TX_CNTRL0_2DEFER 0x20
-+#define TX_CNTRL0_RMII 0x40 /* reduced MII */
-+#define TX_CNTRL1_RETRIES 0x0F /* 4 bits */
-+
-+/* RX Control Registers */
-+#define RX_CNTRL0_RX_EN 0x01
-+#define RX_CNTRL0_PADSTRIP_EN 0x02
-+#define RX_CNTRL0_SEND_FCS 0x04
-+#define RX_CNTRL0_PAUSE_EN 0x08
-+#define RX_CNTRL0_LOOP_EN 0x10
-+#define RX_CNTRL0_ADDR_FLTR_EN 0x20
-+#define RX_CNTRL0_RX_RUNT_EN 0x40
-+#define RX_CNTRL0_BCAST_DIS 0x80
-+#define RX_CNTRL1_DEFER_EN 0x01
-+
-+/* Core Control Register */
-+#define CORE_RESET 0x01
-+#define CORE_RX_FIFO_FLUSH 0x02
-+#define CORE_TX_FIFO_FLUSH 0x04
-+#define CORE_SEND_JAM 0x08
-+#define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */
-+
-+#define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \
-+ TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \
-+ TX_CNTRL0_2DEFER)
-+#define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN
-+#define DEFAULT_CORE_CNTRL CORE_MDC_EN
-+
-+
-+/* NPE message codes */
-+#define NPE_GETSTATUS 0x00
-+#define NPE_EDB_SETPORTADDRESS 0x01
-+#define NPE_EDB_GETMACADDRESSDATABASE 0x02
-+#define NPE_EDB_SETMACADDRESSSDATABASE 0x03
-+#define NPE_GETSTATS 0x04
-+#define NPE_RESETSTATS 0x05
-+#define NPE_SETMAXFRAMELENGTHS 0x06
-+#define NPE_VLAN_SETRXTAGMODE 0x07
-+#define NPE_VLAN_SETDEFAULTRXVID 0x08
-+#define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09
-+#define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A
-+#define NPE_VLAN_SETRXQOSENTRY 0x0B
-+#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C
-+#define NPE_STP_SETBLOCKINGSTATE 0x0D
-+#define NPE_FW_SETFIREWALLMODE 0x0E
-+#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F
-+#define NPE_PC_SETAPMACTABLE 0x11
-+#define NPE_SETLOOPBACK_MODE 0x12
-+#define NPE_PC_SETBSSIDTABLE 0x13
-+#define NPE_ADDRESS_FILTER_CONFIG 0x14
-+#define NPE_APPENDFCSCONFIG 0x15
-+#define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16
-+#define NPE_MAC_RECOVERY_START 0x17
-+
-+
-+#ifdef __ARMEB__
-+typedef struct sk_buff buffer_t;
-+#define free_buffer dev_kfree_skb
-+#define free_buffer_irq dev_kfree_skb_irq
-+#else
-+typedef void buffer_t;
-+#define free_buffer kfree
-+#define free_buffer_irq kfree
-+#endif
-+
-+struct eth_regs {
-+ u32 tx_control[2], __res1[2]; /* 000 */
-+ u32 rx_control[2], __res2[2]; /* 010 */
-+ u32 random_seed, __res3[3]; /* 020 */
-+ u32 partial_empty_threshold, __res4; /* 030 */
-+ u32 partial_full_threshold, __res5; /* 038 */
-+ u32 tx_start_bytes, __res6[3]; /* 040 */
-+ u32 tx_deferral, rx_deferral,__res7[2]; /* 050 */
-+ u32 tx_2part_deferral[2], __res8[2]; /* 060 */
-+ u32 slot_time, __res9[3]; /* 070 */
-+ u32 mdio_command[4]; /* 080 */
-+ u32 mdio_status[4]; /* 090 */
-+ u32 mcast_mask[6], __res10[2]; /* 0A0 */
-+ u32 mcast_addr[6], __res11[2]; /* 0C0 */
-+ u32 int_clock_threshold, __res12[3]; /* 0E0 */
-+ u32 hw_addr[6], __res13[61]; /* 0F0 */
-+ u32 core_control; /* 1FC */
-+};
-+
-+struct port {
-+ struct resource *mem_res;
-+ struct eth_regs __iomem *regs;
-+ struct npe *npe;
-+ struct net_device *netdev;
-+ struct napi_struct napi;
-+ struct net_device_stats stat;
-+ struct mii_if_info mii;
-+ struct delayed_work mdio_thread;
-+ struct eth_plat_info *plat;
-+ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
-+ struct desc *desc_tab; /* coherent */
-+ u32 desc_tab_phys;
-+ int id; /* logical port ID */
-+ u16 mii_bmcr;
-+};
-+
-+/* NPE message structure */
-+struct msg {
-+#ifdef __ARMEB__
-+ u8 cmd, eth_id, byte2, byte3;
-+ u8 byte4, byte5, byte6, byte7;
-+#else
-+ u8 byte3, byte2, eth_id, cmd;
-+ u8 byte7, byte6, byte5, byte4;
-+#endif
-+};
-+
-+/* Ethernet packet descriptor */
-+struct desc {
-+ u32 next; /* pointer to next buffer, unused */
-+
-+#ifdef __ARMEB__
-+ u16 buf_len; /* buffer length */
-+ u16 pkt_len; /* packet length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u8 dest_id;
-+ u8 src_id;
-+ u16 flags;
-+ u8 qos;
-+ u8 padlen;
-+ u16 vlan_tci;
-+#else
-+ u16 pkt_len; /* packet length */
-+ u16 buf_len; /* buffer length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u16 flags;
-+ u8 src_id;
-+ u8 dest_id;
-+ u16 vlan_tci;
-+ u8 padlen;
-+ u8 qos;
-+#endif
-+
-+#ifdef __ARMEB__
-+ u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3;
-+ u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1;
-+ u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5;
-+#else
-+ u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0;
-+ u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4;
-+ u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2;
-+#endif
-+};
-+
-+
-+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
-+
-+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
-+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
-+{
-+ int i;
-+ for (i = 0; i < cnt; i++)
-+ dest[i] = swab32(src[i]);
-+}
-+#endif
-+
-+static spinlock_t mdio_lock;
-+static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
-+static int ports_open;
-+static struct port *npe_port_tab[MAX_NPES];
-+static struct dma_pool *dma_pool;
-+
-+
-+static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
-+ int write, u16 cmd)
-+{
-+ int cycles = 0;
-+
-+ if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
-+ printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
-+ return 0;
-+ }
-+
-+ if (write) {
-+ __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]);
-+ __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]);
-+ }
-+ __raw_writel(((phy_id << 5) | location) & 0xFF,
-+ &mdio_regs->mdio_command[2]);
-+ __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */,
-+ &mdio_regs->mdio_command[3]);
-+
-+ while ((cycles < MAX_MDIO_RETRIES) &&
-+ (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) {
-+ udelay(1);
-+ cycles++;
-+ }
-+
-+ if (cycles == MAX_MDIO_RETRIES) {
-+ printk(KERN_ERR "%s: MII write failed\n", dev->name);
-+ return 0;
-+ }
-+
-+#if DEBUG_MDIO
-+ printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
-+ cycles);
-+#endif
-+
-+ if (write)
-+ return 0;
-+
-+ if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
-+ printk(KERN_ERR "%s: MII read failed\n", dev->name);
-+ return 0;
-+ }
-+
-+ return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
-+ (__raw_readl(&mdio_regs->mdio_status[1]) << 8);
-+}
-+
-+static int mdio_read(struct net_device *dev, int phy_id, int location)
-+{
-+ unsigned long flags;
-+ u16 val;
-+
-+ spin_lock_irqsave(&mdio_lock, flags);
-+ val = mdio_cmd(dev, phy_id, location, 0, 0);
-+ spin_unlock_irqrestore(&mdio_lock, flags);
-+ return val;
-+}
-+
-+static void mdio_write(struct net_device *dev, int phy_id, int location,
-+ int val)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&mdio_lock, flags);
-+ mdio_cmd(dev, phy_id, location, 1, val);
-+ spin_unlock_irqrestore(&mdio_lock, flags);
-+}
-+
-+static void phy_reset(struct net_device *dev, int phy_id)
-+{
-+ struct port *port = netdev_priv(dev);
-+ int cycles = 0;
-+
-+ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
-+
-+ while (cycles < MAX_MII_RESET_RETRIES) {
-+ if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-+#if DEBUG_MDIO
-+ printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
-+ dev->name, cycles);
-+#endif
-+ return;
-+ }
-+ udelay(1);
-+ cycles++;
-+ }
-+
-+ printk(KERN_ERR "%s: MII reset failed\n", dev->name);
-+}
-+
-+static void eth_set_duplex(struct port *port)
-+{
-+ if (port->mii.full_duplex)
-+ __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
-+ &port->regs->tx_control[0]);
-+ else
-+ __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
-+ &port->regs->tx_control[0]);
-+}
-+
-+
-+static void phy_check_media(struct port *port, int init)
-+{
-+ if (mii_check_media(&port->mii, 1, init))
-+ eth_set_duplex(port);
-+ if (port->mii.force_media) { /* mii_check_media() doesn't work */
-+ struct net_device *dev = port->netdev;
-+ int cur_link = mii_link_ok(&port->mii);
-+ int prev_link = netif_carrier_ok(dev);
-+
-+ if (!prev_link && cur_link) {
-+ printk(KERN_INFO "%s: link up\n", dev->name);
-+ netif_carrier_on(dev);
-+ } else if (prev_link && !cur_link) {
-+ printk(KERN_INFO "%s: link down\n", dev->name);
-+ netif_carrier_off(dev);
-+ }
-+ }
-+}
-+
-+
-+static void mdio_thread(struct work_struct *work)
-+{
-+ struct port *port = container_of(work, struct port, mdio_thread.work);
-+
-+ phy_check_media(port, 0);
-+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
-+}
-+
-+
-+static inline void debug_pkt(struct net_device *dev, const char *func,
-+ u8 *data, int len)
-+{
-+#if DEBUG_PKT_BYTES
-+ int i;
-+
-+ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
-+ for (i = 0; i < len; i++) {
-+ if (i >= DEBUG_PKT_BYTES)
-+ break;
-+ printk("%s%02X",
-+ ((i == 6) || (i == 12) || (i >= 14)) ? " " : "",
-+ data[i]);
-+ }
-+ printk("\n");
-+#endif
-+}
-+
-+
-+static inline void debug_desc(u32 phys, struct desc *desc)
-+{
-+#if DEBUG_DESC
-+ printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X"
-+ " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n",
-+ phys, desc->next, desc->buf_len, desc->pkt_len,
-+ desc->data, desc->dest_id, desc->src_id, desc->flags,
-+ desc->qos, desc->padlen, desc->vlan_tci,
-+ desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2,
-+ desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5,
-+ desc->src_mac_0, desc->src_mac_1, desc->src_mac_2,
-+ desc->src_mac_3, desc->src_mac_4, desc->src_mac_5);
-+#endif
-+}
-+
-+static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
-+{
-+#if DEBUG_QUEUES
-+ static struct {
-+ int queue;
-+ char *name;
-+ } names[] = {
-+ { TX_QUEUE(0x10), "TX#0 " },
-+ { TX_QUEUE(0x20), "TX#1 " },
-+ { TX_QUEUE(0x00), "TX#2 " },
-+ { RXFREE_QUEUE(0x10), "RX-free#0 " },
-+ { RXFREE_QUEUE(0x20), "RX-free#1 " },
-+ { RXFREE_QUEUE(0x00), "RX-free#2 " },
-+ { TXDONE_QUEUE, "TX-done " },
-+ };
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(names); i++)
-+ if (names[i].queue == queue)
-+ break;
-+
-+ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
-+ i < ARRAY_SIZE(names) ? names[i].name : "",
-+ is_get ? "->" : "<-", phys);
-+#endif
-+}
-+
-+static inline u32 queue_get_entry(unsigned int queue)
-+{
-+ u32 phys = qmgr_get_entry(queue);
-+ debug_queue(queue, 1, phys);
-+ return phys;
-+}
-+
-+static inline int queue_get_desc(unsigned int queue, struct port *port,
-+ int is_tx)
-+{
-+ u32 phys, tab_phys, n_desc;
-+ struct desc *tab;
-+
-+ if (!(phys = queue_get_entry(queue)))
-+ return -1;
-+
-+ phys &= ~0x1F; /* mask out non-address bits */
-+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
-+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
-+ n_desc = (phys - tab_phys) / sizeof(struct desc);
-+ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
-+ debug_desc(phys, &tab[n_desc]);
-+ BUG_ON(tab[n_desc].next);
-+ return n_desc;
-+}
-+
-+static inline void queue_put_desc(unsigned int queue, u32 phys,
-+ struct desc *desc)
-+{
-+ debug_queue(queue, 0, phys);
-+ debug_desc(phys, desc);
-+ BUG_ON(phys & 0x1F);
-+ qmgr_put_entry(queue, phys);
-+ BUG_ON(qmgr_stat_overflow(queue));
-+}
-+
-+
-+static inline void dma_unmap_tx(struct port *port, struct desc *desc)
-+{
-+#ifdef __ARMEB__
-+ dma_unmap_single(&port->netdev->dev, desc->data,
-+ desc->buf_len, DMA_TO_DEVICE);
-+#else
-+ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
-+ ALIGN((desc->data & 3) + desc->buf_len, 4),
-+ DMA_TO_DEVICE);
-+#endif
-+}
-+
-+
-+static void eth_rx_irq(void *pdev)
-+{
-+ struct net_device *dev = pdev;
-+ struct port *port = netdev_priv(dev);
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
-+#endif
-+ qmgr_disable_irq(port->plat->rxq);
-+ netif_rx_schedule(dev, &port->napi);
-+}
-+
-+static int eth_poll(struct napi_struct *napi, int budget)
-+{
-+ struct port *port = container_of(napi, struct port, napi);
-+ struct net_device *dev = port->netdev;
-+ unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id);
-+ int received = 0;
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
-+#endif
-+
-+ while (received < budget) {
-+ struct sk_buff *skb;
-+ struct desc *desc;
-+ int n;
-+#ifdef __ARMEB__
-+ struct sk_buff *temp;
-+ u32 phys;
-+#endif
-+
-+ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
-+ received = 0; /* No packet received */
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
-+ dev->name);
-+#endif
-+ netif_rx_complete(dev, &port->napi);
-+ qmgr_enable_irq(rxq);
-+ if (!qmgr_stat_empty(rxq) &&
-+ netif_rx_reschedule(dev, &port->napi)) {
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll"
-+ " netif_rx_reschedule successed\n",
-+ dev->name);
-+#endif
-+ qmgr_disable_irq(rxq);
-+ continue;
-+ }
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: eth_poll all done\n",
-+ dev->name);
-+#endif
-+ return 0; /* all work done */
-+ }
-+
-+ desc = rx_desc_ptr(port, n);
-+
-+#ifdef __ARMEB__
-+ if ((skb = netdev_alloc_skb(dev, MAX_MRU)) != NULL) {
-+ phys = dma_map_single(&dev->dev, skb->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+ dev_kfree_skb(skb);
-+ skb = NULL;
-+ }
-+ }
-+#else
-+ skb = netdev_alloc_skb(dev, desc->pkt_len);
-+#endif
-+
-+ if (!skb) {
-+ port->stat.rx_dropped++;
-+ /* put the desc back on RX-ready queue */
-+ desc->buf_len = MAX_MRU;
-+ desc->pkt_len = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ continue;
-+ }
-+
-+ /* process received frame */
-+#ifdef __ARMEB__
-+ temp = skb;
-+ skb = port->rx_buff_tab[n];
-+ dma_unmap_single(&dev->dev, desc->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+#else
-+ dma_sync_single(&dev->dev, desc->data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
-+ ALIGN(desc->pkt_len, 4) / 4);
-+#endif
-+ skb_put(skb, desc->pkt_len);
-+
-+ debug_pkt(dev, "eth_poll", skb->data, skb->len);
-+
-+ skb->protocol = eth_type_trans(skb, dev);
-+ dev->last_rx = jiffies;
-+ port->stat.rx_packets++;
-+ port->stat.rx_bytes += skb->len;
-+ netif_receive_skb(skb);
-+
-+ /* put the new buffer on RX-free queue */
-+#ifdef __ARMEB__
-+ port->rx_buff_tab[n] = temp;
-+ desc->data = phys;
-+#endif
-+ desc->buf_len = MAX_MRU;
-+ desc->pkt_len = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ received++;
-+ }
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
-+#endif
-+ return received; /* not all work done */
-+}
-+
-+
-+static void eth_txdone_irq(void *unused)
-+{
-+ u32 phys;
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
-+#endif
-+ while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) {
-+ u32 npe_id, n_desc;
-+ struct port *port;
-+ struct desc *desc;
-+ int start;
-+
-+ npe_id = phys & 3;
-+ BUG_ON(npe_id >= MAX_NPES);
-+ port = npe_port_tab[npe_id];
-+ BUG_ON(!port);
-+ phys &= ~0x1F; /* mask out non-address bits */
-+ n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc);
-+ BUG_ON(n_desc >= TX_DESCS);
-+ desc = tx_desc_ptr(port, n_desc);
-+ debug_desc(phys, desc);
-+
-+ if (port->tx_buff_tab[n_desc]) { /* not the draining packet */
-+ port->stat.tx_packets++;
-+ port->stat.tx_bytes += desc->pkt_len;
-+
-+ dma_unmap_tx(port, desc);
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n",
-+ port->netdev->name, port->tx_buff_tab[n_desc]);
-+#endif
-+ free_buffer_irq(port->tx_buff_tab[n_desc]);
-+ port->tx_buff_tab[n_desc] = NULL;
-+ }
-+
-+ start = qmgr_stat_empty(port->plat->txreadyq);
-+ queue_put_desc(port->plat->txreadyq, phys, desc);
-+ if (start) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
-+ port->netdev->name);
-+#endif
-+ netif_wake_queue(port->netdev);
-+ }
-+ }
-+}
-+
-+static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ unsigned int txreadyq = port->plat->txreadyq;
-+ int len, offset, bytes, n;
-+ void *mem;
-+ u32 phys;
-+ struct desc *desc;
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
-+#endif
-+
-+ if (unlikely(skb->len > MAX_MRU)) {
-+ dev_kfree_skb(skb);
-+ port->stat.tx_errors++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ debug_pkt(dev, "eth_xmit", skb->data, skb->len);
-+
-+ len = skb->len;
-+#ifdef __ARMEB__
-+ offset = 0; /* no need to keep alignment */
-+ bytes = len;
-+ mem = skb->data;
-+#else
-+ offset = (int)skb->data & 3; /* keep 32-bit alignment */
-+ bytes = ALIGN(offset + len, 4);
-+ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
-+ dev_kfree_skb(skb);
-+ port->stat.tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
-+ dev_kfree_skb(skb);
-+#endif
-+
-+ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+#ifdef __ARMEB__
-+ dev_kfree_skb(skb);
-+#else
-+ kfree(mem);
-+#endif
-+ port->stat.tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ n = queue_get_desc(txreadyq, port, 1);
-+ BUG_ON(n < 0);
-+ desc = tx_desc_ptr(port, n);
-+
-+#ifdef __ARMEB__
-+ port->tx_buff_tab[n] = skb;
-+#else
-+ port->tx_buff_tab[n] = mem;
-+#endif
-+ desc->data = phys + offset;
-+ desc->buf_len = desc->pkt_len = len;
-+
-+ /* NPE firmware pads short frames with zeros internally */
-+ wmb();
-+ queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
-+ dev->trans_start = jiffies;
-+
-+ if (qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
-+#endif
-+ netif_stop_queue(dev);
-+ /* we could miss TX ready interrupt */
-+ if (!qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit ready again\n",
-+ dev->name);
-+#endif
-+ netif_wake_queue(dev);
-+ }
-+ }
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
-+#endif
-+ return NETDEV_TX_OK;
-+}
-+
-+
-+static struct net_device_stats *eth_stats(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ return &port->stat;
-+}
-+
-+static void eth_set_mcast_list(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct dev_mc_list *mclist = dev->mc_list;
-+ u8 diffs[ETH_ALEN], *addr;
-+ int cnt = dev->mc_count, i;
-+
-+ if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
-+ __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
-+ &port->regs->rx_control[0]);
-+ return;
-+ }
-+
-+ memset(diffs, 0, ETH_ALEN);
-+ addr = mclist->dmi_addr; /* first MAC address */
-+
-+ while (--cnt && (mclist = mclist->next))
-+ for (i = 0; i < ETH_ALEN; i++)
-+ diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
-+
-+ for (i = 0; i < ETH_ALEN; i++) {
-+ __raw_writel(addr[i], &port->regs->mcast_addr[i]);
-+ __raw_writel(~diffs[i], &port->regs->mcast_mask[i]);
-+ }
-+
-+ __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN,
-+ &port->regs->rx_control[0]);
-+}
-+
-+
-+static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
-+{
-+ struct port *port = netdev_priv(dev);
-+ unsigned int duplex_chg;
-+ int err;
-+
-+ if (!netif_running(dev))
-+ return -EINVAL;
-+ err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
-+ if (duplex_chg)
-+ eth_set_duplex(port);
-+ return err;
-+}
-+
-+
-+static int request_queues(struct port *port)
-+{
-+ int err;
-+
-+ err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0);
-+ if (err)
-+ return err;
-+
-+ err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rxfree;
-+
-+ err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rx;
-+
-+ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_tx;
-+
-+ /* TX-done queue handles skbs sent out by the NPEs */
-+ if (!ports_open) {
-+ err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0);
-+ if (err)
-+ goto rel_txready;
-+ }
-+ return 0;
-+
-+rel_txready:
-+ qmgr_release_queue(port->plat->txreadyq);
-+rel_tx:
-+ qmgr_release_queue(TX_QUEUE(port->id));
-+rel_rx:
-+ qmgr_release_queue(port->plat->rxq);
-+rel_rxfree:
-+ qmgr_release_queue(RXFREE_QUEUE(port->id));
-+ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
-+ port->netdev->name);
-+ return err;
-+}
-+
-+static void release_queues(struct port *port)
-+{
-+ qmgr_release_queue(RXFREE_QUEUE(port->id));
-+ qmgr_release_queue(port->plat->rxq);
-+ qmgr_release_queue(TX_QUEUE(port->id));
-+ qmgr_release_queue(port->plat->txreadyq);
-+
-+ if (!ports_open)
-+ qmgr_release_queue(TXDONE_QUEUE);
-+}
-+
-+static int init_queues(struct port *port)
-+{
-+ int i;
-+
-+ if (!ports_open)
-+ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
-+ POOL_ALLOC_SIZE, 32, 0)))
-+ return -ENOMEM;
-+
-+ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
-+ &port->desc_tab_phys)))
-+ return -ENOMEM;
-+ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
-+ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
-+ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
-+
-+ /* Setup RX buffers */
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff;
-+ void *data;
-+#ifdef __ARMEB__
-+ if (!(buff = netdev_alloc_skb(port->netdev, MAX_MRU)))
-+ return -ENOMEM;
-+ data = buff->data;
-+#else
-+ if (!(buff = kmalloc(MAX_MRU, GFP_KERNEL)))
-+ return -ENOMEM;
-+ data = buff;
-+#endif
-+ desc->buf_len = MAX_MRU;
-+ desc->data = dma_map_single(&port->netdev->dev, data,
-+ MAX_MRU, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(desc->data)) {
-+ free_buffer(buff);
-+ return -EIO;
-+ }
-+ port->rx_buff_tab[i] = buff;
-+ }
-+
-+ return 0;
-+}
-+
-+static void destroy_queues(struct port *port)
-+{
-+ int i;
-+
-+ if (port->desc_tab) {
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff = port->rx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_single(&port->netdev->dev,
-+ desc->data, MAX_MRU,
-+ DMA_FROM_DEVICE);
-+ free_buffer(buff);
-+ }
-+ }
-+ for (i = 0; i < TX_DESCS; i++) {
-+ struct desc *desc = tx_desc_ptr(port, i);
-+ buffer_t *buff = port->tx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_tx(port, desc);
-+ free_buffer(buff);
-+ }
-+ }
-+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
-+ port->desc_tab = NULL;
-+ }
-+
-+ if (!ports_open && dma_pool) {
-+ dma_pool_destroy(dma_pool);
-+ dma_pool = NULL;
-+ }
-+}
-+
-+static int eth_open(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int i, err;
-+
-+ if (!npe_running(npe)) {
-+ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
-+ if (err)
-+ return err;
-+
-+ if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
-+ printk(KERN_ERR "%s: %s not responding\n", dev->name,
-+ npe_name(npe));
-+ return -EIO;
-+ }
-+ }
-+
-+ mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_VLAN_SETRXQOSENTRY;
-+ msg.eth_id = port->id;
-+ msg.byte5 = port->plat->rxq | 0x80;
-+ msg.byte7 = port->plat->rxq << 4;
-+ for (i = 0; i < 8; i++) {
-+ msg.byte3 = i;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ"))
-+ return -EIO;
-+ }
-+
-+ msg.cmd = NPE_EDB_SETPORTADDRESS;
-+ msg.eth_id = PHYSICAL_ID(port->id);
-+ msg.byte2 = dev->dev_addr[0];
-+ msg.byte3 = dev->dev_addr[1];
-+ msg.byte4 = dev->dev_addr[2];
-+ msg.byte5 = dev->dev_addr[3];
-+ msg.byte6 = dev->dev_addr[4];
-+ msg.byte7 = dev->dev_addr[5];
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC"))
-+ return -EIO;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_FW_SETFIREWALLMODE;
-+ msg.eth_id = port->id;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
-+ return -EIO;
-+
-+ if ((err = request_queues(port)) != 0)
-+ return err;
-+
-+ if ((err = init_queues(port)) != 0) {
-+ destroy_queues(port);
-+ release_queues(port);
-+ return err;
-+ }
-+
-+ for (i = 0; i < ETH_ALEN; i++)
-+ __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
-+ __raw_writel(0x08, &port->regs->random_seed);
-+ __raw_writel(0x12, &port->regs->partial_empty_threshold);
-+ __raw_writel(0x30, &port->regs->partial_full_threshold);
-+ __raw_writel(0x08, &port->regs->tx_start_bytes);
-+ __raw_writel(0x15, &port->regs->tx_deferral);
-+ __raw_writel(0x08, &port->regs->tx_2part_deferral[0]);
-+ __raw_writel(0x07, &port->regs->tx_2part_deferral[1]);
-+ __raw_writel(0x80, &port->regs->slot_time);
-+ __raw_writel(0x01, &port->regs->int_clock_threshold);
-+
-+ /* Populate queues with buffers, no failure after this point */
-+ for (i = 0; i < TX_DESCS; i++)
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
-+
-+ for (i = 0; i < RX_DESCS; i++)
-+ queue_put_desc(RXFREE_QUEUE(port->id),
-+ rx_desc_phys(port, i), rx_desc_ptr(port, i));
-+
-+ __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]);
-+ __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]);
-+ __raw_writel(0, &port->regs->rx_control[1]);
-+ __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
-+
-+ napi_enable(&port->napi); /* check location of this call */
-+
-+ phy_check_media(port, 1);
-+ eth_set_mcast_list(dev);
-+ netif_start_queue(dev);
-+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
-+
-+ qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ eth_rx_irq, dev);
-+ if (!ports_open) {
-+ qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ eth_txdone_irq, NULL);
-+ qmgr_enable_irq(TXDONE_QUEUE);
-+ }
-+ ports_open++;
-+ netif_rx_schedule(dev, &port->napi); /* we may already have RX data, enables IRQ */
-+ return 0;
-+}
-+
-+static int eth_close(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct msg msg;
-+ int buffs = RX_DESCS; /* allocated RX buffers */
-+ int i;
-+
-+ ports_open--;
-+ qmgr_disable_irq(port->plat->rxq);
-+ netif_stop_queue(dev);
-+
-+ while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0)
-+ buffs--;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_SETLOOPBACK_MODE;
-+ msg.eth_id = port->id;
-+ msg.byte3 = 1;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
-+ printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
-+
-+ i = 0;
-+ do { /* drain RX buffers */
-+ while (queue_get_desc(port->plat->rxq, port, 0) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ if (qmgr_stat_empty(TX_QUEUE(port->id))) {
-+ /* we have to inject some packet */
-+ struct desc *desc;
-+ u32 phys;
-+ int n = queue_get_desc(port->plat->txreadyq, port, 1);
-+ BUG_ON(n < 0);
-+ desc = tx_desc_ptr(port, n);
-+ phys = tx_desc_phys(port, n);
-+ desc->buf_len = desc->pkt_len = 1;
-+ wmb();
-+ queue_put_desc(TX_QUEUE(port->id), phys, desc);
-+ }
-+ udelay(1);
-+ } while (++i < MAX_CLOSE_WAIT);
-+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
-+ " left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
-+#endif
-+
-+ buffs = TX_DESCS;
-+ while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0)
-+ buffs--; /* cancel TX */
-+
-+ i = 0;
-+ do {
-+ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ } while (++i < MAX_CLOSE_WAIT);
-+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
-+ "left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
-+#endif
-+
-+ msg.byte3 = 0;
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
-+ printk(KERN_CRIT "%s: unable to disable loopback\n",
-+ dev->name);
-+
-+ port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
-+ ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
-+ mdio_write(dev, port->plat->phy, MII_BMCR,
-+ port->mii_bmcr | BMCR_PDOWN);
-+
-+ if (!ports_open)
-+ qmgr_disable_irq(TXDONE_QUEUE);
-+ cancel_rearming_delayed_work(&port->mdio_thread);
-+ napi_disable(&port->napi);
-+ destroy_queues(port);
-+ release_queues(port);
-+ return 0;
-+}
-+
-+static int __devinit eth_init_one(struct platform_device *pdev)
-+{
-+ struct port *port;
-+ struct net_device *dev;
-+ struct eth_plat_info *plat = pdev->dev.platform_data;
-+ u32 regs_phys;
-+ int err;
-+
-+ if (!(dev = alloc_etherdev(sizeof(struct port))))
-+ return -ENOMEM;
-+
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+ port = netdev_priv(dev);
-+ port->netdev = dev;
-+ port->id = pdev->id;
-+
-+ switch (port->id) {
-+ case IXP4XX_ETH_NPEA:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
-+ regs_phys = IXP4XX_EthA_BASE_PHYS;
-+ break;
-+ case IXP4XX_ETH_NPEB:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-+ regs_phys = IXP4XX_EthB_BASE_PHYS;
-+ break;
-+ case IXP4XX_ETH_NPEC:
-+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
-+ regs_phys = IXP4XX_EthC_BASE_PHYS;
-+ break;
-+ default:
-+ err = -ENOSYS;
-+ goto err_free;
-+ }
-+
-+ dev->open = eth_open;
-+ dev->hard_start_xmit = eth_xmit;
-+ dev->stop = eth_close;
-+ dev->get_stats = eth_stats;
-+ dev->do_ioctl = eth_ioctl;
-+ dev->set_multicast_list = eth_set_mcast_list;
-+ dev->tx_queue_len = 100;
-+
-+ netif_napi_add(dev, &port->napi, eth_poll, ETH_NAPI_WEIGHT);
-+
-+ if (!(port->npe = npe_request(NPE_ID(port->id)))) {
-+ err = -EIO;
-+ goto err_free;
-+ }
-+
-+ if (register_netdev(dev)) {
-+ err = -EIO;
-+ goto err_npe_rel;
-+ }
-+
-+ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
-+ if (!port->mem_res) {
-+ err = -EBUSY;
-+ goto err_unreg;
-+ }
-+
-+ port->plat = plat;
-+ npe_port_tab[NPE_ID(port->id)] = port;
-+ memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
-+ &port->regs->core_control);
-+ udelay(50);
-+ __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
-+ udelay(50);
-+
-+ port->mii.dev = dev;
-+ port->mii.mdio_read = mdio_read;
-+ port->mii.mdio_write = mdio_write;
-+ port->mii.phy_id = plat->phy;
-+ port->mii.phy_id_mask = 0x1F;
-+ port->mii.reg_num_mask = 0x1F;
-+
-+ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
-+ npe_name(port->npe));
-+
-+ phy_reset(dev, plat->phy);
-+ port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
-+ ~(BMCR_RESET | BMCR_PDOWN);
-+ mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
-+
-+ INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
-+ return 0;
-+
-+err_unreg:
-+ unregister_netdev(dev);
-+err_npe_rel:
-+ npe_release(port->npe);
-+err_free:
-+ free_netdev(dev);
-+ return err;
-+}
-+
-+static int __devexit eth_remove_one(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct port *port = netdev_priv(dev);
-+
-+ unregister_netdev(dev);
-+ npe_port_tab[NPE_ID(port->id)] = NULL;
-+ platform_set_drvdata(pdev, NULL);
-+ npe_release(port->npe);
-+ release_resource(port->mem_res);
-+ free_netdev(dev);
-+ return 0;
-+}
-+
-+static struct platform_driver drv = {
-+ .driver.name = DRV_NAME,
-+ .probe = eth_init_one,
-+ .remove = eth_remove_one,
-+};
-+
-+static int __init eth_init_module(void)
-+{
-+ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
-+ return -ENOSYS;
-+
-+ /* All MII PHY accesses use NPE-B Ethernet registers */
-+ spin_lock_init(&mdio_lock);
-+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-+ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
-+
-+ return platform_driver_register(&drv);
-+}
-+
-+static void __exit eth_cleanup_module(void)
-+{
-+ platform_driver_unregister(&drv);
-+}
-+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
-+MODULE_LICENSE("GPL v2");
-+module_init(eth_init_module);
-+module_exit(eth_cleanup_module);
-Index: linux-2.6.24.7/drivers/net/wan/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/wan/Kconfig
-+++ linux-2.6.24.7/drivers/net/wan/Kconfig
-@@ -334,6 +334,15 @@ config DSCC4_PCI_RST
-
- Say Y if your card supports this feature.
-
-+config IXP4XX_HSS
-+ tristate "IXP4xx HSS (synchronous serial port) support"
-+ depends on HDLC && ARM && ARCH_IXP4XX
-+ select IXP4XX_NPE
-+ select IXP4XX_QMGR
-+ help
-+ Say Y here if you want to use built-in HSS ports
-+ on IXP4xx processor.
-+
- config DLCI
- tristate "Frame Relay DLCI support"
- ---help---
-Index: linux-2.6.24.7/drivers/net/wan/Makefile
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/wan/Makefile
-+++ linux-2.6.24.7/drivers/net/wan/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_C101) += c101.o
- obj-$(CONFIG_WANXL) += wanxl.o
- obj-$(CONFIG_PCI200SYN) += pci200syn.o
- obj-$(CONFIG_PC300TOO) += pc300too.o
-+obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o
-
- clean-files := wanxlfw.inc
- $(obj)/wanxl.o: $(obj)/wanxlfw.inc
-Index: linux-2.6.24.7/drivers/net/wan/ixp4xx_hss.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/drivers/net/wan/ixp4xx_hss.c
-@@ -0,0 +1,1270 @@
-+/*
-+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/hdlc.h>
-+#include <linux/platform_device.h>
-+#include <asm/arch/npe.h>
-+#include <asm/arch/qmgr.h>
-+
-+#define DEBUG_QUEUES 0
-+#define DEBUG_DESC 0
-+#define DEBUG_RX 0
-+#define DEBUG_TX 0
-+#define DEBUG_PKT_BYTES 0
-+#define DEBUG_CLOSE 0
-+
-+#define DRV_NAME "ixp4xx_hss"
-+
-+#define PKT_EXTRA_FLAGS 0 /* orig 1 */
-+#define FRAME_SYNC_OFFSET 0 /* unused, channelized only */
-+#define FRAME_SYNC_SIZE 1024
-+#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
-+#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
-+
-+#define RX_DESCS 16 /* also length of all RX queues */
-+#define TX_DESCS 16 /* also length of all TX queues */
-+
-+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
-+#define MAX_CLOSE_WAIT 1000 /* microseconds */
-+
-+/* Queue IDs */
-+#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
-+#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
-+#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
-+#define HSS0_PKT_TX1_QUEUE 15
-+#define HSS0_PKT_TX2_QUEUE 16
-+#define HSS0_PKT_TX3_QUEUE 17
-+#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
-+#define HSS0_PKT_RXFREE1_QUEUE 19
-+#define HSS0_PKT_RXFREE2_QUEUE 20
-+#define HSS0_PKT_RXFREE3_QUEUE 21
-+#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
-+
-+#define HSS1_CHL_RXTRIG_QUEUE 10
-+#define HSS1_PKT_RX_QUEUE 0
-+#define HSS1_PKT_TX0_QUEUE 5
-+#define HSS1_PKT_TX1_QUEUE 6
-+#define HSS1_PKT_TX2_QUEUE 7
-+#define HSS1_PKT_TX3_QUEUE 8
-+#define HSS1_PKT_RXFREE0_QUEUE 1
-+#define HSS1_PKT_RXFREE1_QUEUE 2
-+#define HSS1_PKT_RXFREE2_QUEUE 3
-+#define HSS1_PKT_RXFREE3_QUEUE 4
-+#define HSS1_PKT_TXDONE_QUEUE 9
-+
-+#define NPE_PKT_MODE_HDLC 0
-+#define NPE_PKT_MODE_RAW 1
-+#define NPE_PKT_MODE_56KMODE 2
-+#define NPE_PKT_MODE_56KENDIAN_MSB 4
-+
-+/* PKT_PIPE_HDLC_CFG_WRITE flags */
-+#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
-+#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
-+#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
-+
-+
-+/* hss_config, PCRs */
-+/* Frame sync sampling, default = active low */
-+#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
-+#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
-+#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
-+
-+/* Frame sync pin: input (default) or output generated off a given clk edge */
-+#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
-+#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
-+
-+/* Frame and data clock sampling on edge, default = falling */
-+#define PCR_FCLK_EDGE_RISING 0x08000000
-+#define PCR_DCLK_EDGE_RISING 0x04000000
-+
-+/* Clock direction, default = input */
-+#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
-+
-+/* Generate/Receive frame pulses, default = enabled */
-+#define PCR_FRM_PULSE_DISABLED 0x01000000
-+
-+ /* Data rate is full (default) or half the configured clk speed */
-+#define PCR_HALF_CLK_RATE 0x00200000
-+
-+/* Invert data between NPE and HSS FIFOs? (default = no) */
-+#define PCR_DATA_POLARITY_INVERT 0x00100000
-+
-+/* TX/RX endianness, default = LSB */
-+#define PCR_MSB_ENDIAN 0x00080000
-+
-+/* Normal (default) / open drain mode (TX only) */
-+#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
-+
-+/* No framing bit transmitted and expected on RX? (default = framing bit) */
-+#define PCR_SOF_NO_FBIT 0x00020000
-+
-+/* Drive data pins? */
-+#define PCR_TX_DATA_ENABLE 0x00010000
-+
-+/* Voice 56k type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_V56K_HIGH 0x00002000
-+#define PCR_TX_V56K_HIGH_IMP 0x00004000
-+
-+/* Unassigned type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_UNASS_HIGH 0x00000800
-+#define PCR_TX_UNASS_HIGH_IMP 0x00001000
-+
-+/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
-+#define PCR_TX_FB_HIGH_IMP 0x00000400
-+
-+/* 56k data endiannes - which bit unused: high (default) or low */
-+#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
-+
-+/* 56k data transmission type: 32/8 bit data (default) or 56K data */
-+#define PCR_TX_56KS_56K_DATA 0x00000100
-+
-+/* hss_config, cCR */
-+/* Number of packetized clients, default = 1 */
-+#define CCR_NPE_HFIFO_2_HDLC 0x04000000
-+#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
-+
-+/* default = no loopback */
-+#define CCR_LOOPBACK 0x02000000
-+
-+/* HSS number, default = 0 (first) */
-+#define CCR_SECOND_HSS 0x01000000
-+
-+
-+/* hss_config, clkCR: main:10, num:10, denom:12 */
-+#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
-+
-+#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
-+#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
-+#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
-+#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
-+#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
-+#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
-+
-+#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
-+#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
-+#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
-+#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
-+#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
-+#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
-+
-+
-+/* hss_config, LUT entries */
-+#define TDMMAP_UNASSIGNED 0
-+#define TDMMAP_HDLC 1 /* HDLC - packetized */
-+#define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */
-+#define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */
-+
-+#define TIMESLOTS 128
-+#define LUT_BITS 2
-+
-+/* offsets into HSS config */
-+#define HSS_CONFIG_TX_PCR 0x00
-+#define HSS_CONFIG_RX_PCR 0x04
-+#define HSS_CONFIG_CORE_CR 0x08
-+#define HSS_CONFIG_CLOCK_CR 0x0C
-+#define HSS_CONFIG_TX_FCR 0x10
-+#define HSS_CONFIG_RX_FCR 0x14
-+#define HSS_CONFIG_TX_LUT 0x18
-+#define HSS_CONFIG_RX_LUT 0x38
-+
-+
-+/* NPE command codes */
-+/* writes the ConfigWord value to the location specified by offset */
-+#define PORT_CONFIG_WRITE 0x40
-+
-+/* triggers the NPE to load the contents of the configuration table */
-+#define PORT_CONFIG_LOAD 0x41
-+
-+/* triggers the NPE to return an HssErrorReadResponse message */
-+#define PORT_ERROR_READ 0x42
-+
-+/* reset NPE internal status and enable the HssChannelized operation */
-+#define CHAN_FLOW_ENABLE 0x43
-+#define CHAN_FLOW_DISABLE 0x44
-+#define CHAN_IDLE_PATTERN_WRITE 0x45
-+#define CHAN_NUM_CHANS_WRITE 0x46
-+#define CHAN_RX_BUF_ADDR_WRITE 0x47
-+#define CHAN_RX_BUF_CFG_WRITE 0x48
-+#define CHAN_TX_BLK_CFG_WRITE 0x49
-+#define CHAN_TX_BUF_ADDR_WRITE 0x4A
-+#define CHAN_TX_BUF_SIZE_WRITE 0x4B
-+#define CHAN_TSLOTSWITCH_ENABLE 0x4C
-+#define CHAN_TSLOTSWITCH_DISABLE 0x4D
-+
-+/* downloads the gainWord value for a timeslot switching channel associated
-+ with bypassNum */
-+#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
-+
-+/* triggers the NPE to reset internal status and enable the HssPacketized
-+ operation for the flow specified by pPipe */
-+#define PKT_PIPE_FLOW_ENABLE 0x50
-+#define PKT_PIPE_FLOW_DISABLE 0x51
-+#define PKT_NUM_PIPES_WRITE 0x52
-+#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
-+#define PKT_PIPE_HDLC_CFG_WRITE 0x54
-+#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
-+#define PKT_PIPE_RX_SIZE_WRITE 0x56
-+#define PKT_PIPE_MODE_WRITE 0x57
-+
-+/* HDLC packet status values - desc->status */
-+#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
-+#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
-+#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
-+#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
-+ this packet (if buf_len < pkt_len) */
-+#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
-+#define ERR_HDLC_ABORT 6 /* abort sequence received */
-+#define ERR_DISCONNECTING 7 /* disconnect is in progress */
-+
-+
-+#ifdef __ARMEB__
-+typedef struct sk_buff buffer_t;
-+#define free_buffer dev_kfree_skb
-+#define free_buffer_irq dev_kfree_skb_irq
-+#else
-+typedef void buffer_t;
-+#define free_buffer kfree
-+#define free_buffer_irq kfree
-+#endif
-+
-+struct port {
-+ struct npe *npe;
-+ struct net_device *netdev;
-+ struct hss_plat_info *plat;
-+ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
-+ struct desc *desc_tab; /* coherent */
-+ u32 desc_tab_phys;
-+ int id;
-+ unsigned int clock_type, clock_rate, loopback;
-+ u8 hdlc_cfg;
-+};
-+
-+/* NPE message structure */
-+struct msg {
-+#ifdef __ARMEB__
-+ u8 cmd, unused, hss_port, index;
-+ union {
-+ struct { u8 data8a, data8b, data8c, data8d; };
-+ struct { u16 data16a, data16b; };
-+ struct { u32 data32; };
-+ };
-+#else
-+ u8 index, hss_port, unused, cmd;
-+ union {
-+ struct { u8 data8d, data8c, data8b, data8a; };
-+ struct { u16 data16b, data16a; };
-+ struct { u32 data32; };
-+ };
-+#endif
-+};
-+
-+/* HDLC packet descriptor */
-+struct desc {
-+ u32 next; /* pointer to next buffer, unused */
-+
-+#ifdef __ARMEB__
-+ u16 buf_len; /* buffer length */
-+ u16 pkt_len; /* packet length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u8 status;
-+ u8 error_count;
-+ u16 __reserved;
-+#else
-+ u16 pkt_len; /* packet length */
-+ u16 buf_len; /* buffer length */
-+ u32 data; /* pointer to data buffer in RAM */
-+ u16 __reserved;
-+ u8 error_count;
-+ u8 status;
-+#endif
-+ u32 __reserved1[4];
-+};
-+
-+
-+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
-+
-+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
-+
-+/*****************************************************************************
-+ * global variables
-+ ****************************************************************************/
-+
-+static int ports_open;
-+static struct dma_pool *dma_pool;
-+
-+static const struct {
-+ int tx, txdone, rx, rxfree;
-+}queue_ids[2] = {{ HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE,
-+ HSS0_PKT_RX_QUEUE, HSS0_PKT_RXFREE0_QUEUE },
-+ { HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE,
-+ HSS1_PKT_RX_QUEUE, HSS1_PKT_RXFREE0_QUEUE },
-+};
-+
-+/*****************************************************************************
-+ * utility functions
-+ ****************************************************************************/
-+
-+static inline struct port* dev_to_port(struct net_device *dev)
-+{
-+ return dev_to_hdlc(dev)->priv;
-+}
-+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
-+{
-+ int i;
-+ for (i = 0; i < cnt; i++)
-+ dest[i] = swab32(src[i]);
-+}
-+#endif
-+
-+static inline void debug_pkt(struct net_device *dev, const char *func,
-+ u8 *data, int len)
-+{
-+#if DEBUG_PKT_BYTES
-+ int i;
-+
-+ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
-+ for (i = 0; i < len; i++) {
-+ if (i >= DEBUG_PKT_BYTES)
-+ break;
-+ printk("%s%02X", !(i % 4) ? " " : "", data[i]);
-+ }
-+ printk("\n");
-+#endif
-+}
-+
-+
-+static inline void debug_desc(u32 phys, struct desc *desc)
-+{
-+#if DEBUG_DESC
-+ printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
-+ phys, desc->next, desc->buf_len, desc->pkt_len,
-+ desc->data, desc->status, desc->error_count);
-+#endif
-+}
-+
-+static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
-+{
-+#if DEBUG_QUEUES
-+ static struct {
-+ int queue;
-+ char *name;
-+ } names[] = {
-+ { HSS0_PKT_TX0_QUEUE, "TX#0 " },
-+ { HSS0_PKT_TXDONE_QUEUE, "TX-done#0 " },
-+ { HSS0_PKT_RX_QUEUE, "RX#0 " },
-+ { HSS0_PKT_RXFREE0_QUEUE, "RX-free#0 " },
-+ { HSS1_PKT_TX0_QUEUE, "TX#1 " },
-+ { HSS1_PKT_TXDONE_QUEUE, "TX-done#1 " },
-+ { HSS1_PKT_RX_QUEUE, "RX#1 " },
-+ { HSS1_PKT_RXFREE0_QUEUE, "RX-free#1 " },
-+ };
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(names); i++)
-+ if (names[i].queue == queue)
-+ break;
-+
-+ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
-+ i < ARRAY_SIZE(names) ? names[i].name : "",
-+ is_get ? "->" : "<-", phys);
-+#endif
-+}
-+
-+static inline u32 queue_get_entry(unsigned int queue)
-+{
-+ u32 phys = qmgr_get_entry(queue);
-+ debug_queue(queue, 1, phys);
-+ return phys;
-+}
-+
-+static inline int queue_get_desc(unsigned int queue, struct port *port,
-+ int is_tx)
-+{
-+ u32 phys, tab_phys, n_desc;
-+ struct desc *tab;
-+
-+ if (!(phys = queue_get_entry(queue)))
-+ return -1;
-+
-+ BUG_ON(phys & 0x1F);
-+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
-+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
-+ n_desc = (phys - tab_phys) / sizeof(struct desc);
-+ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
-+ debug_desc(phys, &tab[n_desc]);
-+ BUG_ON(tab[n_desc].next);
-+ return n_desc;
-+}
-+
-+static inline void queue_put_desc(unsigned int queue, u32 phys,
-+ struct desc *desc)
-+{
-+ debug_queue(queue, 0, phys);
-+ debug_desc(phys, desc);
-+ BUG_ON(phys & 0x1F);
-+ qmgr_put_entry(queue, phys);
-+ BUG_ON(qmgr_stat_overflow(queue));
-+}
-+
-+
-+static inline void dma_unmap_tx(struct port *port, struct desc *desc)
-+{
-+#ifdef __ARMEB__
-+ dma_unmap_single(&port->netdev->dev, desc->data,
-+ desc->buf_len, DMA_TO_DEVICE);
-+#else
-+ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
-+ ALIGN((desc->data & 3) + desc->buf_len, 4),
-+ DMA_TO_DEVICE);
-+#endif
-+}
-+
-+
-+static void hss_hdlc_set_carrier(void *pdev, int carrier)
-+{
-+ struct net_device *dev = pdev;
-+ if (carrier)
-+ netif_carrier_on(dev);
-+ else
-+ netif_carrier_off(dev);
-+}
-+
-+static void hss_hdlc_rx_irq(void *pdev)
-+{
-+ struct net_device *dev = pdev;
-+ struct port *port = dev_to_port(dev);
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
-+#endif
-+ qmgr_disable_irq(queue_ids[port->id].rx);
-+ netif_rx_schedule(dev);
-+}
-+
-+static int hss_hdlc_poll(struct net_device *dev, int *budget)
-+{
-+ struct port *port = dev_to_port(dev);
-+ unsigned int rxq = queue_ids[port->id].rx;
-+ unsigned int rxfreeq = queue_ids[port->id].rxfree;
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ int quota = dev->quota, received = 0;
-+
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
-+#endif
-+
-+ while (quota) {
-+ struct sk_buff *skb;
-+ struct desc *desc;
-+ int n;
-+#ifdef __ARMEB__
-+ struct sk_buff *temp;
-+ u32 phys;
-+#endif
-+
-+ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
-+ dev->quota -= received; /* No packet received */
-+ *budget -= received;
-+ received = 0;
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll"
-+ " netif_rx_complete\n", dev->name);
-+#endif
-+ netif_rx_complete(dev);
-+ qmgr_enable_irq(rxq);
-+ if (!qmgr_stat_empty(rxq) &&
-+ netif_rx_reschedule(dev, 0)) {
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll"
-+ " netif_rx_reschedule successed\n",
-+ dev->name);
-+#endif
-+ qmgr_disable_irq(rxq);
-+ continue;
-+ }
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
-+ dev->name);
-+#endif
-+ return 0; /* all work done */
-+ }
-+
-+ desc = rx_desc_ptr(port, n);
-+
-+ if (desc->error_count) /* FIXME - remove printk */
-+ printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
-+ " errors %u\n", dev->name, desc->status,
-+ desc->error_count);
-+
-+ skb = NULL;
-+ switch (desc->status) {
-+ case 0:
-+#ifdef __ARMEB__
-+ if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) {
-+ phys = dma_map_single(&dev->dev, skb->data,
-+ RX_SIZE,
-+ DMA_FROM_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+ dev_kfree_skb(skb);
-+ skb = NULL;
-+ }
-+ }
-+#else
-+ skb = netdev_alloc_skb(dev, desc->pkt_len);
-+#endif
-+ if (!skb)
-+ stats->rx_dropped++;
-+ break;
-+ case ERR_HDLC_ALIGN:
-+ case ERR_HDLC_ABORT:
-+ stats->rx_frame_errors++;
-+ stats->rx_errors++;
-+ break;
-+ case ERR_HDLC_FCS:
-+ stats->rx_crc_errors++;
-+ stats->rx_errors++;
-+ break;
-+ case ERR_HDLC_TOO_LONG:
-+ stats->rx_length_errors++;
-+ stats->rx_errors++;
-+ break;
-+ default: /* FIXME - remove printk */
-+ printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X"
-+ " errors %u\n", dev->name, desc->status,
-+ desc->error_count);
-+ stats->rx_errors++;
-+ }
-+
-+ if (!skb) {
-+ /* put the desc back on RX-ready queue */
-+ desc->buf_len = RX_SIZE;
-+ desc->pkt_len = desc->status = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ continue;
-+ }
-+
-+ /* process received frame */
-+#ifdef __ARMEB__
-+ temp = skb;
-+ skb = port->rx_buff_tab[n];
-+ dma_unmap_single(&dev->dev, desc->data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+#else
-+ dma_sync_single(&dev->dev, desc->data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
-+ ALIGN(desc->pkt_len, 4) / 4);
-+#endif
-+ skb_put(skb, desc->pkt_len);
-+
-+ debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len);
-+
-+ skb->protocol = hdlc_type_trans(skb, dev);
-+ dev->last_rx = jiffies;
-+ stats->rx_packets++;
-+ stats->rx_bytes += skb->len;
-+ netif_receive_skb(skb);
-+
-+ /* put the new buffer on RX-free queue */
-+#ifdef __ARMEB__
-+ port->rx_buff_tab[n] = temp;
-+ desc->data = phys;
-+#endif
-+ desc->buf_len = RX_SIZE;
-+ desc->pkt_len = 0;
-+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
-+ quota--;
-+ received++;
-+ }
-+ dev->quota -= received;
-+ *budget -= received;
-+#if DEBUG_RX
-+ printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
-+#endif
-+ return 1; /* not all work done */
-+}
-+
-+
-+static void hss_hdlc_txdone_irq(void *pdev)
-+{
-+ struct net_device *dev = pdev;
-+ struct port *port = dev_to_port(dev);
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ int n_desc;
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
-+#endif
-+ while ((n_desc = queue_get_desc(queue_ids[port->id].txdone,
-+ port, 1)) >= 0) {
-+ struct desc *desc;
-+ int start;
-+
-+ desc = tx_desc_ptr(port, n_desc);
-+
-+ stats->tx_packets++;
-+ stats->tx_bytes += desc->pkt_len;
-+
-+ dma_unmap_tx(port, desc);
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
-+ port->netdev->name, port->tx_buff_tab[n_desc]);
-+#endif
-+ free_buffer_irq(port->tx_buff_tab[n_desc]);
-+ port->tx_buff_tab[n_desc] = NULL;
-+
-+ start = qmgr_stat_empty(port->plat->txreadyq);
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, n_desc), desc);
-+ if (start) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
-+ " ready\n", port->netdev->name);
-+#endif
-+ netif_wake_queue(port->netdev);
-+ }
-+ }
-+}
-+
-+static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct port *port = dev_to_port(dev);
-+ struct net_device_stats *stats = hdlc_stats(dev);
-+ unsigned int txreadyq = port->plat->txreadyq;
-+ int len, offset, bytes, n;
-+ void *mem;
-+ u32 phys;
-+ struct desc *desc;
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
-+#endif
-+
-+ if (unlikely(skb->len > HDLC_MAX_MRU)) {
-+ dev_kfree_skb(skb);
-+ stats->tx_errors++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len);
-+
-+ len = skb->len;
-+#ifdef __ARMEB__
-+ offset = 0; /* no need to keep alignment */
-+ bytes = len;
-+ mem = skb->data;
-+#else
-+ offset = (int)skb->data & 3; /* keep 32-bit alignment */
-+ bytes = ALIGN(offset + len, 4);
-+ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
-+ dev_kfree_skb(skb);
-+ stats->tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
-+ dev_kfree_skb(skb);
-+#endif
-+
-+ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-+ if (dma_mapping_error(phys)) {
-+#ifdef __ARMEB__
-+ dev_kfree_skb(skb);
-+#else
-+ kfree(mem);
-+#endif
-+ stats->tx_dropped++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ n = queue_get_desc(txreadyq, port, 1);
-+ BUG_ON(n < 0);
-+ desc = tx_desc_ptr(port, n);
-+
-+#ifdef __ARMEB__
-+ port->tx_buff_tab[n] = skb;
-+#else
-+ port->tx_buff_tab[n] = mem;
-+#endif
-+ desc->data = phys + offset;
-+ desc->buf_len = desc->pkt_len = len;
-+
-+ wmb();
-+ queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
-+ dev->trans_start = jiffies;
-+
-+ if (qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
-+#endif
-+ netif_stop_queue(dev);
-+ /* we could miss TX ready interrupt */
-+ if (!qmgr_stat_empty(txreadyq)) {
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
-+ dev->name);
-+#endif
-+ netif_wake_queue(dev);
-+ }
-+ }
-+
-+#if DEBUG_TX
-+ printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
-+#endif
-+ return NETDEV_TX_OK;
-+}
-+
-+
-+static int request_hdlc_queues(struct port *port)
-+{
-+ int err;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0);
-+ if (err)
-+ return err;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rxfree;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_rx;
-+
-+ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_tx;
-+
-+ err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0);
-+ if (err)
-+ goto rel_txready;
-+ return 0;
-+
-+rel_txready:
-+ qmgr_release_queue(port->plat->txreadyq);
-+rel_tx:
-+ qmgr_release_queue(queue_ids[port->id].tx);
-+rel_rx:
-+ qmgr_release_queue(queue_ids[port->id].rx);
-+rel_rxfree:
-+ qmgr_release_queue(queue_ids[port->id].rxfree);
-+ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
-+ port->netdev->name);
-+ return err;
-+}
-+
-+static void release_hdlc_queues(struct port *port)
-+{
-+ qmgr_release_queue(queue_ids[port->id].rxfree);
-+ qmgr_release_queue(queue_ids[port->id].rx);
-+ qmgr_release_queue(queue_ids[port->id].txdone);
-+ qmgr_release_queue(queue_ids[port->id].tx);
-+ qmgr_release_queue(port->plat->txreadyq);
-+}
-+
-+static int init_hdlc_queues(struct port *port)
-+{
-+ int i;
-+
-+ if (!ports_open)
-+ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
-+ POOL_ALLOC_SIZE, 32, 0)))
-+ return -ENOMEM;
-+
-+ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
-+ &port->desc_tab_phys)))
-+ return -ENOMEM;
-+ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
-+ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
-+ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
-+
-+ /* Setup RX buffers */
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff;
-+ void *data;
-+#ifdef __ARMEB__
-+ if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE)))
-+ return -ENOMEM;
-+ data = buff->data;
-+#else
-+ if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL)))
-+ return -ENOMEM;
-+ data = buff;
-+#endif
-+ desc->buf_len = RX_SIZE;
-+ desc->data = dma_map_single(&port->netdev->dev, data,
-+ RX_SIZE, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(desc->data)) {
-+ free_buffer(buff);
-+ return -EIO;
-+ }
-+ port->rx_buff_tab[i] = buff;
-+ }
-+
-+ return 0;
-+}
-+
-+static void destroy_hdlc_queues(struct port *port)
-+{
-+ int i;
-+
-+ if (port->desc_tab) {
-+ for (i = 0; i < RX_DESCS; i++) {
-+ struct desc *desc = rx_desc_ptr(port, i);
-+ buffer_t *buff = port->rx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_single(&port->netdev->dev,
-+ desc->data, RX_SIZE,
-+ DMA_FROM_DEVICE);
-+ free_buffer(buff);
-+ }
-+ }
-+ for (i = 0; i < TX_DESCS; i++) {
-+ struct desc *desc = tx_desc_ptr(port, i);
-+ buffer_t *buff = port->tx_buff_tab[i];
-+ if (buff) {
-+ dma_unmap_tx(port, desc);
-+ free_buffer(buff);
-+ }
-+ }
-+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
-+ port->desc_tab = NULL;
-+ }
-+
-+ if (!ports_open && dma_pool) {
-+ dma_pool_destroy(dma_pool);
-+ dma_pool = NULL;
-+ }
-+}
-+
-+static int hss_hdlc_open(struct net_device *dev)
-+{
-+ struct port *port = dev_to_port(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int i, err;
-+
-+ if (!npe_running(npe)) {
-+ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
-+ if (err)
-+ return err;
-+ }
-+
-+ if ((err = hdlc_open(dev)) != 0)
-+ return err;
-+
-+ if (port->plat->open)
-+ if ((err = port->plat->open(port->id, port->netdev,
-+ hss_hdlc_set_carrier)) != 0)
-+ goto err_hdlc_close;
-+
-+ /* HSS main configuration */
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = 0; /* offset in HSS config */
-+
-+ msg.data32 = PCR_FRM_PULSE_DISABLED |
-+ PCR_SOF_NO_FBIT |
-+ PCR_MSB_ENDIAN |
-+ PCR_TX_DATA_ENABLE;
-+
-+ if (port->clock_type == CLOCK_INT)
-+ msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
-+
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_PCR") != 0))
-+ goto err_plat_close; /* 0: TX PCR */
-+
-+ msg.index = 4;
-+ msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_PCR") != 0))
-+ goto err_plat_close; /* 4: RX PCR */
-+
-+ msg.index = 8;
-+ msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) |
-+ (port->id ? CCR_SECOND_HSS : 0);
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CORE_CR") != 0))
-+ goto err_plat_close; /* 8: Core CR */
-+
-+ msg.index = 12;
-+ msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CLK_CR") != 0))
-+ goto err_plat_close; /* 12: CLK CR */
-+
-+ msg.data32 = (FRAME_SYNC_OFFSET << 16) | (FRAME_SYNC_SIZE - 1);
-+ msg.index = 16;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_FCR") != 0))
-+ goto err_plat_close; /* 16: TX FCR */
-+
-+ msg.index = 20;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_FCR") != 0))
-+ goto err_plat_close; /* 20: RX FCR */
-+
-+ msg.data32 = 0; /* Fill LUT with HDLC timeslots */
-+ for (i = 0; i < 32 / LUT_BITS; i++)
-+ msg.data32 |= TDMMAP_HDLC << (LUT_BITS * i);
-+
-+ for (i = 0; i < 2 /* TX and RX */ * TIMESLOTS * LUT_BITS / 8; i += 4) {
-+ msg.index = 24 + i; /* 24 - 55: TX LUT, 56 - 87: RX LUT */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_LUT") != 0))
-+ goto err_plat_close;
-+ }
-+
-+ /* HDLC mode configuration */
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_NUM_PIPES_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = PKT_NUM_PIPES;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_PIPES") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = PKT_PIPE_FIFO_SIZEW;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_FIFO") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data32 = 0x7F7F7F7F;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_IDLE") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_LOAD;
-+ msg.hss_port = port->id;
-+ if ((err = npe_send_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
-+ goto err_plat_close;
-+ if ((err = npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
-+ goto err_plat_close;
-+
-+ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
-+ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
-+ printk(KERN_DEBUG "%s: unexpected message received in"
-+ " response to HSS_LOAD_CONFIG\n", npe_name(npe));
-+ err = EIO;
-+ goto err_plat_close;
-+ }
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = port->hdlc_cfg; /* rx_cfg */
-+ msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_HDLC_CFG") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_MODE_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = NPE_PKT_MODE_HDLC;
-+ /* msg.data8b = inv_mask */
-+ /* msg.data8c = or_mask */
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_MODE") != 0))
-+ goto err_plat_close;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data16a = HDLC_MAX_MRU;
-+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_RX_SIZE") != 0))
-+ goto err_plat_close;
-+
-+ if ((err = request_hdlc_queues(port)) != 0)
-+ goto err_plat_close;
-+
-+ if ((err = init_hdlc_queues(port)) != 0)
-+ goto err_destroy_queues;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FLOW_ENABLE;
-+ msg.hss_port = port->id;
-+ if ((err = npe_send_message(npe, &msg, "HSS_ENABLE_PKT_PIPE") != 0))
-+ goto err_destroy_queues;
-+
-+ /* Populate queues with buffers, no failure after this point */
-+ for (i = 0; i < TX_DESCS; i++)
-+ queue_put_desc(port->plat->txreadyq,
-+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
-+
-+ for (i = 0; i < RX_DESCS; i++)
-+ queue_put_desc(queue_ids[port->id].rxfree,
-+ rx_desc_phys(port, i), rx_desc_ptr(port, i));
-+
-+ netif_start_queue(dev);
-+
-+ qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ hss_hdlc_rx_irq, dev);
-+
-+ qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ hss_hdlc_txdone_irq, dev);
-+ qmgr_enable_irq(queue_ids[port->id].txdone);
-+
-+ ports_open++;
-+ netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
-+ return 0;
-+
-+err_destroy_queues:
-+ destroy_hdlc_queues(port);
-+ release_hdlc_queues(port);
-+err_plat_close:
-+ if (port->plat->close)
-+ port->plat->close(port->id, port->netdev);
-+err_hdlc_close:
-+ hdlc_close(dev);
-+ return err;
-+}
-+
-+static int hss_hdlc_close(struct net_device *dev)
-+{
-+ struct port *port = dev_to_port(dev);
-+ struct npe *npe = port->npe;
-+ struct msg msg;
-+ int buffs = RX_DESCS; /* allocated RX buffers */
-+ int i;
-+
-+ ports_open--;
-+ qmgr_disable_irq(queue_ids[port->id].rx);
-+ netif_stop_queue(dev);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PKT_PIPE_FLOW_DISABLE;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "HSS_DISABLE_PKT_PIPE")) {
-+ printk(KERN_CRIT "HSS-%i: unable to stop HDLC flow\n",
-+ port->id);
-+ /* The upper level would ignore the error anyway */
-+ }
-+
-+ while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
-+ buffs--;
-+ while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
-+ buffs--;
-+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
-+ " left in NPE\n", dev->name, buffs);
-+
-+ buffs = TX_DESCS;
-+ while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
-+ buffs--; /* cancel TX */
-+
-+ i = 0;
-+ do {
-+ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
-+ buffs--;
-+ if (!buffs)
-+ break;
-+ } while (++i < MAX_CLOSE_WAIT);
-+
-+ if (buffs)
-+ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
-+ "left in NPE\n", dev->name, buffs);
-+#if DEBUG_CLOSE
-+ if (!buffs)
-+ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
-+#endif
-+ qmgr_disable_irq(queue_ids[port->id].txdone);
-+ destroy_hdlc_queues(port);
-+ release_hdlc_queues(port);
-+
-+ if (port->plat->close)
-+ port->plat->close(port->id, port->netdev);
-+ hdlc_close(dev);
-+ return 0;
-+}
-+
-+
-+static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
-+ unsigned short parity)
-+{
-+ struct port *port = dev_to_port(dev);
-+
-+ if (encoding != ENCODING_NRZ)
-+ return -EINVAL;
-+
-+ switch(parity) {
-+ case PARITY_CRC16_PR1_CCITT:
-+ port->hdlc_cfg = 0;
-+ return 0;
-+
-+ case PARITY_CRC32_PR1_CCITT:
-+ port->hdlc_cfg = PKT_HDLC_CRC_32;
-+ return 0;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+
-+static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ const size_t size = sizeof(sync_serial_settings);
-+ sync_serial_settings new_line;
-+ int clk;
-+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
-+ struct port *port = dev_to_port(dev);
-+
-+ if (cmd != SIOCWANDEV)
-+ return hdlc_ioctl(dev, ifr, cmd);
-+
-+ switch(ifr->ifr_settings.type) {
-+ case IF_GET_IFACE:
-+ ifr->ifr_settings.type = IF_IFACE_V35;
-+ if (ifr->ifr_settings.size < size) {
-+ ifr->ifr_settings.size = size; /* data size wanted */
-+ return -ENOBUFS;
-+ }
-+ memset(&new_line, 0, sizeof(new_line));
-+ new_line.clock_type = port->clock_type;
-+ new_line.clock_rate = port->clock_rate;
-+ new_line.loopback = port->loopback;
-+ if (copy_to_user(line, &new_line, size))
-+ return -EFAULT;
-+ return 0;
-+
-+ case IF_IFACE_SYNC_SERIAL:
-+ case IF_IFACE_V35:
-+ if(!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (dev->flags & IFF_UP)
-+ return -EBUSY; /* Cannot change parameters when open */
-+
-+ if (copy_from_user(&new_line, line, size))
-+ return -EFAULT;
-+
-+ clk = new_line.clock_type;
-+ if (port->plat->set_clock)
-+ clk = port->plat->set_clock(port->id, clk);
-+
-+ if (clk != CLOCK_EXT && clk != CLOCK_INT)
-+ return -EINVAL; /* No such clock setting */
-+
-+ if (new_line.loopback != 0 && new_line.loopback != 1)
-+ return -EINVAL;
-+
-+ port->clock_type = clk; /* Update settings */
-+ port->clock_rate = new_line.clock_rate;
-+ port->loopback = new_line.loopback;
-+ return 0;
-+
-+ default:
-+ return hdlc_ioctl(dev, ifr, cmd);
-+ }
-+}
-+
-+
-+static int __devinit hss_init_one(struct platform_device *pdev)
-+{
-+ struct port *port;
-+ struct net_device *dev;
-+ hdlc_device *hdlc;
-+ int err;
-+
-+ if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+ return -ENOMEM;
-+ platform_set_drvdata(pdev, port);
-+ port->id = pdev->id;
-+
-+ if ((port->npe = npe_request(0)) == NULL) {
-+ err = -ENOSYS;
-+ goto err_free;
-+ }
-+
-+ port->plat = pdev->dev.platform_data;
-+ if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
-+ err = -ENOMEM;
-+ goto err_plat;
-+ }
-+
-+ SET_MODULE_OWNER(net);
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+ hdlc = dev_to_hdlc(dev);
-+ hdlc->attach = hss_hdlc_attach;
-+ hdlc->xmit = hss_hdlc_xmit;
-+ dev->open = hss_hdlc_open;
-+ dev->poll = hss_hdlc_poll;
-+ dev->stop = hss_hdlc_close;
-+ dev->do_ioctl = hss_hdlc_ioctl;
-+ dev->weight = 16;
-+ dev->tx_queue_len = 100;
-+ port->clock_type = CLOCK_EXT;
-+ port->clock_rate = 2048000;
-+
-+ if (register_hdlc_device(dev)) {
-+ printk(KERN_ERR "HSS-%i: unable to register HDLC device\n",
-+ port->id);
-+ err = -ENOBUFS;
-+ goto err_free_netdev;
-+ }
-+ printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
-+ return 0;
-+
-+err_free_netdev:
-+ free_netdev(dev);
-+err_plat:
-+ npe_release(port->npe);
-+ platform_set_drvdata(pdev, NULL);
-+err_free:
-+ kfree(port);
-+ return err;
-+}
-+
-+static int __devexit hss_remove_one(struct platform_device *pdev)
-+{
-+ struct port *port = platform_get_drvdata(pdev);
-+
-+ unregister_hdlc_device(port->netdev);
-+ free_netdev(port->netdev);
-+ npe_release(port->npe);
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(port);
-+ return 0;
-+}
-+
-+static struct platform_driver drv = {
-+ .driver.name = DRV_NAME,
-+ .probe = hss_init_one,
-+ .remove = hss_remove_one,
-+};
-+
-+static int __init hss_init_module(void)
-+{
-+ if ((ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
-+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
-+ return -ENOSYS;
-+ return platform_driver_register(&drv);
-+}
-+
-+static void __exit hss_cleanup_module(void)
-+{
-+ platform_driver_unregister(&drv);
-+}
-+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
-+MODULE_LICENSE("GPL v2");
-+module_init(hss_init_module);
-+module_exit(hss_cleanup_module);
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-@@ -15,10 +15,6 @@
- *
- */
-
--#ifndef __ASM_ARCH_HARDWARE_H__
--#error "Do not include this directly, instead #include <asm/hardware.h>"
--#endif
--
- #ifndef _ASM_ARM_IXP4XX_H_
- #define _ASM_ARM_IXP4XX_H_
-
-@@ -607,4 +603,36 @@
-
- #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-+/* "fuse" bits of IXP_EXP_CFG2 */
-+#define IXP4XX_FEATURE_RCOMP (1 << 0)
-+#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
-+#define IXP4XX_FEATURE_HASH (1 << 2)
-+#define IXP4XX_FEATURE_AES (1 << 3)
-+#define IXP4XX_FEATURE_DES (1 << 4)
-+#define IXP4XX_FEATURE_HDLC (1 << 5)
-+#define IXP4XX_FEATURE_AAL (1 << 6)
-+#define IXP4XX_FEATURE_HSS (1 << 7)
-+#define IXP4XX_FEATURE_UTOPIA (1 << 8)
-+#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
-+#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
-+#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
-+#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
-+#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
-+#define IXP4XX_FEATURE_PCI (1 << 14)
-+#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
-+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
-+#define IXP4XX_FEATURE_USB_HOST (1 << 18)
-+#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
-+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
-+#define IXP4XX_FEATURE_RSA (1 << 21)
-+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
-+#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
-+
-+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
-+ IXP4XX_FEATURE_USB_HOST | \
-+ IXP4XX_FEATURE_NPEA_ETH | \
-+ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
-+ IXP4XX_FEATURE_RSA | \
-+ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-+
- #endif
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/cpu.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/cpu.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/cpu.h
-@@ -28,4 +28,19 @@ extern unsigned int processor_id;
- #define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP465_PROCESSOR_ID_VALUE)
-
-+static inline u32 ixp4xx_read_feature_bits(void)
-+{
-+ unsigned int val = ~*IXP4XX_EXP_CFG2;
-+ val &= ~IXP4XX_FEATURE_RESERVED;
-+ if (!cpu_is_ixp46x())
-+ val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
-+
-+ return val;
-+}
-+
-+static inline void ixp4xx_write_feature_bits(u32 value)
-+{
-+ *IXP4XX_EXP_CFG2 = ~value;
-+}
-+
- #endif /* _ASM_ARCH_CPU_H */
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -27,13 +27,13 @@
-
- #define pcibios_assign_all_busses() 1
-
-+/* Register locations and bits */
-+#include "ixp4xx-regs.h"
-+
- #ifndef __ASSEMBLER__
- #include <asm/arch/cpu.h>
- #endif
-
--/* Register locations and bits */
--#include "ixp4xx-regs.h"
--
- /* Platform helper functions and definitions */
- #include "platform.h"
-
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -13,7 +13,7 @@
- #ifndef _ARCH_UNCOMPRESS_H_
- #define _ARCH_UNCOMPRESS_H_
-
--#include <asm/hardware.h>
-+#include "ixp4xx-regs.h"
- #include <asm/mach-types.h>
- #include <linux/serial_reg.h>
-
-Index: linux-2.6.24.7/arch/arm/kernel/setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/kernel/setup.c
-+++ linux-2.6.24.7/arch/arm/kernel/setup.c
-@@ -62,6 +62,7 @@ extern int root_mountflags;
- extern void _stext, _text, _etext, __data_start, _edata, _end;
-
- unsigned int processor_id;
-+EXPORT_SYMBOL(processor_id);
- unsigned int __machine_arch_type;
- EXPORT_SYMBOL(__machine_arch_type);
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -262,6 +262,20 @@ config IXP4XX_INDIRECT_PCI
- need to use the indirect method instead. If you don't know
- what you need, leave this option unselected.
-
-+config IXP4XX_QMGR
-+ tristate "IXP4xx Queue Manager support"
-+ help
-+ This driver supports IXP4xx built-in hardware queue manager
-+ and is automatically selected by Ethernet and HSS drivers.
-+
-+config IXP4XX_NPE
-+ tristate "IXP4xx Network Processor Engine support"
-+ select HOTPLUG
-+ select FW_LOADER
-+ help
-+ This driver supports IXP4xx built-in network coprocessors
-+ and is automatically selected by Ethernet and HSS drivers.
-+
- endmenu
-
- endif
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile
-@@ -48,3 +48,5 @@ obj-$(CONFIG_MACH_AP1000) += ap1000-setu
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/qmgr.h
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/qmgr.h
-@@ -0,0 +1,126 @@
-+/*
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#ifndef IXP4XX_QMGR_H
-+#define IXP4XX_QMGR_H
-+
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+
-+#define HALF_QUEUES 32
-+#define QUEUES 64 /* only 32 lower queues currently supported */
-+#define MAX_QUEUE_LENGTH 4 /* in dwords */
-+
-+#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
-+#define QUEUE_STAT1_NEARLY_EMPTY 2
-+#define QUEUE_STAT1_NEARLY_FULL 4
-+#define QUEUE_STAT1_FULL 8
-+#define QUEUE_STAT2_UNDERFLOW 1
-+#define QUEUE_STAT2_OVERFLOW 2
-+
-+#define QUEUE_WATERMARK_0_ENTRIES 0
-+#define QUEUE_WATERMARK_1_ENTRY 1
-+#define QUEUE_WATERMARK_2_ENTRIES 2
-+#define QUEUE_WATERMARK_4_ENTRIES 3
-+#define QUEUE_WATERMARK_8_ENTRIES 4
-+#define QUEUE_WATERMARK_16_ENTRIES 5
-+#define QUEUE_WATERMARK_32_ENTRIES 6
-+#define QUEUE_WATERMARK_64_ENTRIES 7
-+
-+/* queue interrupt request conditions */
-+#define QUEUE_IRQ_SRC_EMPTY 0
-+#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1
-+#define QUEUE_IRQ_SRC_NEARLY_FULL 2
-+#define QUEUE_IRQ_SRC_FULL 3
-+#define QUEUE_IRQ_SRC_NOT_EMPTY 4
-+#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5
-+#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6
-+#define QUEUE_IRQ_SRC_NOT_FULL 7
-+
-+struct qmgr_regs {
-+ u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
-+ u32 stat1[4]; /* 0x400 - 0x40F */
-+ u32 stat2[2]; /* 0x410 - 0x417 */
-+ u32 statne_h; /* 0x418 - queue nearly empty */
-+ u32 statf_h; /* 0x41C - queue full */
-+ u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */
-+ u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */
-+ u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */
-+ u32 reserved[1776];
-+ u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */
-+};
-+
-+void qmgr_set_irq(unsigned int queue, int src,
-+ void (*handler)(void *pdev), void *pdev);
-+void qmgr_enable_irq(unsigned int queue);
-+void qmgr_disable_irq(unsigned int queue);
-+
-+/* request_ and release_queue() must be called from non-IRQ context */
-+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-+ unsigned int nearly_empty_watermark,
-+ unsigned int nearly_full_watermark);
-+void qmgr_release_queue(unsigned int queue);
-+
-+
-+static inline void qmgr_put_entry(unsigned int queue, u32 val)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ __raw_writel(val, &qmgr_regs->acc[queue][0]);
-+}
-+
-+static inline u32 qmgr_get_entry(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return __raw_readl(&qmgr_regs->acc[queue][0]);
-+}
-+
-+static inline int qmgr_get_stat1(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
-+ >> ((queue & 7) << 2)) & 0xF;
-+}
-+
-+static inline int qmgr_get_stat2(unsigned int queue)
-+{
-+ extern struct qmgr_regs __iomem *qmgr_regs;
-+ return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
-+ >> ((queue & 0xF) << 1)) & 0x3;
-+}
-+
-+static inline int qmgr_stat_empty(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
-+}
-+
-+static inline int qmgr_stat_nearly_empty(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
-+}
-+
-+static inline int qmgr_stat_nearly_full(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
-+}
-+
-+static inline int qmgr_stat_full(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
-+}
-+
-+static inline int qmgr_stat_underflow(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
-+}
-+
-+static inline int qmgr_stat_overflow(unsigned int queue)
-+{
-+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
-+}
-+
-+#endif
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/npe.h
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/npe.h
-@@ -0,0 +1,39 @@
-+#ifndef __IXP4XX_NPE_H
-+#define __IXP4XX_NPE_H
-+
-+#include <linux/kernel.h>
-+
-+extern const char *npe_names[];
-+
-+struct npe_regs {
-+ u32 exec_addr, exec_data, exec_status_cmd, exec_count;
-+ u32 action_points[4];
-+ u32 watchpoint_fifo, watch_count;
-+ u32 profile_count;
-+ u32 messaging_status, messaging_control;
-+ u32 mailbox_status, /*messaging_*/ in_out_fifo;
-+};
-+
-+struct npe {
-+ struct resource *mem_res;
-+ struct npe_regs __iomem *regs;
-+ u32 regs_phys;
-+ int id;
-+ int valid;
-+};
-+
-+
-+static inline const char *npe_name(struct npe *npe)
-+{
-+ return npe_names[npe->id];
-+}
-+
-+int npe_running(struct npe *npe);
-+int npe_send_message(struct npe *npe, const void *msg, const char *what);
-+int npe_recv_message(struct npe *npe, void *msg, const char *what);
-+int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
-+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
-+struct npe *npe_request(int id);
-+void npe_release(struct npe *npe);
-+
-+#endif /* __IXP4XX_NPE_H */
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-@@ -0,0 +1,274 @@
-+/*
-+ * Intel IXP4xx Queue Manager driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <asm/arch/qmgr.h>
-+
-+#define DEBUG 0
-+
-+struct qmgr_regs __iomem *qmgr_regs;
-+static struct resource *mem_res;
-+static spinlock_t qmgr_lock;
-+static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-+static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-+static void *irq_pdevs[HALF_QUEUES];
-+
-+void qmgr_set_irq(unsigned int queue, int src,
-+ void (*handler)(void *pdev), void *pdev)
-+{
-+ u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
-+ int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
-+ unsigned long flags;
-+
-+ src &= 7;
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
-+ irq_handlers[queue] = handler;
-+ irq_pdevs[queue] = pdev;
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
-+}
-+
-+
-+static irqreturn_t qmgr_irq1(int irq, void *pdev)
-+{
-+ int i;
-+ u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
-+ __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-+
-+ for (i = 0; i < HALF_QUEUES; i++)
-+ if (val & (1 << i))
-+ irq_handlers[i](irq_pdevs[i]);
-+
-+ return val ? IRQ_HANDLED : 0;
-+}
-+
-+
-+void qmgr_enable_irq(unsigned int queue)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
-+ &qmgr_regs->irqen[0]);
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
-+}
-+
-+void qmgr_disable_irq(unsigned int queue)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&qmgr_lock, flags);
-+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
-+ &qmgr_regs->irqen[0]);
-+ spin_unlock_irqrestore(&qmgr_lock, flags);
-+}
-+
-+static inline void shift_mask(u32 *mask)
-+{
-+ mask[3] = mask[3] << 1 | mask[2] >> 31;
-+ mask[2] = mask[2] << 1 | mask[1] >> 31;
-+ mask[1] = mask[1] << 1 | mask[0] >> 31;
-+ mask[0] <<= 1;
-+}
-+
-+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-+ unsigned int nearly_empty_watermark,
-+ unsigned int nearly_full_watermark)
-+{
-+ u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
-+ int err;
-+
-+ if (queue >= HALF_QUEUES)
-+ return -ERANGE;
-+
-+ if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
-+ return -EINVAL;
-+
-+ switch (len) {
-+ case 16:
-+ cfg = 0 << 24;
-+ mask[0] = 0x1;
-+ break;
-+ case 32:
-+ cfg = 1 << 24;
-+ mask[0] = 0x3;
-+ break;
-+ case 64:
-+ cfg = 2 << 24;
-+ mask[0] = 0xF;
-+ break;
-+ case 128:
-+ cfg = 3 << 24;
-+ mask[0] = 0xFF;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ cfg |= nearly_empty_watermark << 26;
-+ cfg |= nearly_full_watermark << 29;
-+ len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */
-+ mask[1] = mask[2] = mask[3] = 0;
-+
-+ if (!try_module_get(THIS_MODULE))
-+ return -ENODEV;
-+
-+ spin_lock_irq(&qmgr_lock);
-+ if (__raw_readl(&qmgr_regs->sram[queue])) {
-+ err = -EBUSY;
-+ goto err;
-+ }
-+
-+ while (1) {
-+ if (!(used_sram_bitmap[0] & mask[0]) &&
-+ !(used_sram_bitmap[1] & mask[1]) &&
-+ !(used_sram_bitmap[2] & mask[2]) &&
-+ !(used_sram_bitmap[3] & mask[3]))
-+ break; /* found free space */
-+
-+ addr++;
-+ shift_mask(mask);
-+ if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
-+ printk(KERN_ERR "qmgr: no free SRAM space for"
-+ " queue %i\n", queue);
-+ err = -ENOMEM;
-+ goto err;
-+ }
-+ }
-+
-+ used_sram_bitmap[0] |= mask[0];
-+ used_sram_bitmap[1] |= mask[1];
-+ used_sram_bitmap[2] |= mask[2];
-+ used_sram_bitmap[3] |= mask[3];
-+ __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
-+ spin_unlock_irq(&qmgr_lock);
-+
-+#if DEBUG
-+ printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
-+ queue, addr);
-+#endif
-+ return 0;
-+
-+err:
-+ spin_unlock_irq(&qmgr_lock);
-+ module_put(THIS_MODULE);
-+ return err;
-+}
-+
-+void qmgr_release_queue(unsigned int queue)
-+{
-+ u32 cfg, addr, mask[4];
-+
-+ BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
-+
-+ spin_lock_irq(&qmgr_lock);
-+ cfg = __raw_readl(&qmgr_regs->sram[queue]);
-+ addr = (cfg >> 14) & 0xFF;
-+
-+ BUG_ON(!addr); /* not requested */
-+
-+ switch ((cfg >> 24) & 3) {
-+ case 0: mask[0] = 0x1; break;
-+ case 1: mask[0] = 0x3; break;
-+ case 2: mask[0] = 0xF; break;
-+ case 3: mask[0] = 0xFF; break;
-+ }
-+
-+ while (addr--)
-+ shift_mask(mask);
-+
-+ __raw_writel(0, &qmgr_regs->sram[queue]);
-+
-+ used_sram_bitmap[0] &= ~mask[0];
-+ used_sram_bitmap[1] &= ~mask[1];
-+ used_sram_bitmap[2] &= ~mask[2];
-+ used_sram_bitmap[3] &= ~mask[3];
-+ irq_handlers[queue] = NULL; /* catch IRQ bugs */
-+ spin_unlock_irq(&qmgr_lock);
-+
-+ module_put(THIS_MODULE);
-+#if DEBUG
-+ printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
-+#endif
-+}
-+
-+static int qmgr_init(void)
-+{
-+ int i, err;
-+ mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
-+ IXP4XX_QMGR_REGION_SIZE,
-+ "IXP4xx Queue Manager");
-+ if (mem_res == NULL)
-+ return -EBUSY;
-+
-+ qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+ if (qmgr_regs == NULL) {
-+ err = -ENOMEM;
-+ goto error_map;
-+ }
-+
-+ /* reset qmgr registers */
-+ for (i = 0; i < 4; i++) {
-+ __raw_writel(0x33333333, &qmgr_regs->stat1[i]);
-+ __raw_writel(0, &qmgr_regs->irqsrc[i]);
-+ }
-+ for (i = 0; i < 2; i++) {
-+ __raw_writel(0, &qmgr_regs->stat2[i]);
-+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
-+ __raw_writel(0, &qmgr_regs->irqen[i]);
-+ }
-+
-+ for (i = 0; i < QUEUES; i++)
-+ __raw_writel(0, &qmgr_regs->sram[i]);
-+
-+ err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
-+ "IXP4xx Queue Manager", NULL);
-+ if (err) {
-+ printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
-+ IRQ_IXP4XX_QM1);
-+ goto error_irq;
-+ }
-+
-+ used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
-+ spin_lock_init(&qmgr_lock);
-+
-+ printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
-+ return 0;
-+
-+error_irq:
-+ iounmap(qmgr_regs);
-+error_map:
-+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+ return err;
-+}
-+
-+static void qmgr_remove(void)
-+{
-+ free_irq(IRQ_IXP4XX_QM1, NULL);
-+ synchronize_irq(IRQ_IXP4XX_QM1);
-+ iounmap(qmgr_regs);
-+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-+}
-+
-+module_init(qmgr_init);
-+module_exit(qmgr_remove);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Krzysztof Halasa");
-+
-+EXPORT_SYMBOL(qmgr_regs);
-+EXPORT_SYMBOL(qmgr_set_irq);
-+EXPORT_SYMBOL(qmgr_enable_irq);
-+EXPORT_SYMBOL(qmgr_disable_irq);
-+EXPORT_SYMBOL(qmgr_request_queue);
-+EXPORT_SYMBOL(qmgr_release_queue);
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -0,0 +1,741 @@
-+/*
-+ * Intel IXP4xx Network Processor Engine driver for Linux
-+ *
-+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ *
-+ * The code is based on publicly available information:
-+ * - Intel IXP4xx Developer's Manual and other e-papers
-+ * - Intel IXP400 Access Library Software (BSD license)
-+ * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ * Thanks, Christian.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/firmware.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <asm/arch/npe.h>
-+
-+#define DEBUG_MSG 0
-+#define DEBUG_FW 0
-+
-+#define NPE_COUNT 3
-+#define MAX_RETRIES 1000 /* microseconds */
-+#define NPE_42X_DATA_SIZE 0x800 /* in dwords */
-+#define NPE_46X_DATA_SIZE 0x1000
-+#define NPE_A_42X_INSTR_SIZE 0x1000
-+#define NPE_B_AND_C_42X_INSTR_SIZE 0x800
-+#define NPE_46X_INSTR_SIZE 0x1000
-+#define REGS_SIZE 0x1000
-+
-+#define NPE_PHYS_REG 32
-+
-+#define FW_MAGIC 0xFEEDF00D
-+#define FW_BLOCK_TYPE_INSTR 0x0
-+#define FW_BLOCK_TYPE_DATA 0x1
-+#define FW_BLOCK_TYPE_EOF 0xF
-+
-+/* NPE exec status (read) and command (write) */
-+#define CMD_NPE_STEP 0x01
-+#define CMD_NPE_START 0x02
-+#define CMD_NPE_STOP 0x03
-+#define CMD_NPE_CLR_PIPE 0x04
-+#define CMD_CLR_PROFILE_CNT 0x0C
-+#define CMD_RD_INS_MEM 0x10 /* instruction memory */
-+#define CMD_WR_INS_MEM 0x11
-+#define CMD_RD_DATA_MEM 0x12 /* data memory */
-+#define CMD_WR_DATA_MEM 0x13
-+#define CMD_RD_ECS_REG 0x14 /* exec access register */
-+#define CMD_WR_ECS_REG 0x15
-+
-+#define STAT_RUN 0x80000000
-+#define STAT_STOP 0x40000000
-+#define STAT_CLEAR 0x20000000
-+#define STAT_ECS_K 0x00800000 /* pipeline clean */
-+
-+#define NPE_STEVT 0x1B
-+#define NPE_STARTPC 0x1C
-+#define NPE_REGMAP 0x1E
-+#define NPE_CINDEX 0x1F
-+
-+#define INSTR_WR_REG_SHORT 0x0000C000
-+#define INSTR_WR_REG_BYTE 0x00004000
-+#define INSTR_RD_FIFO 0x0F888220
-+#define INSTR_RESET_MBOX 0x0FAC8210
-+
-+#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */
-+#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */
-+#define ECS_BG_CTXT_REG_2 0x02
-+#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */
-+#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */
-+#define ECS_PRI_1_CTXT_REG_2 0x06
-+#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */
-+#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */
-+#define ECS_PRI_2_CTXT_REG_2 0x0A
-+#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */
-+#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */
-+#define ECS_DBG_CTXT_REG_2 0x0E
-+#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */
-+
-+#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */
-+#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */
-+#define ECS_REG_0_LDUR_BITS 8
-+#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */
-+#define ECS_REG_1_CCTXT_BITS 16
-+#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */
-+#define ECS_REG_1_SELCTXT_BITS 0
-+#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */
-+#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */
-+#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */
-+
-+/* NPE watchpoint_fifo register bit */
-+#define WFIFO_VALID 0x80000000
-+
-+/* NPE messaging_status register bit definitions */
-+#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */
-+#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */
-+#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */
-+#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */
-+#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */
-+#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */
-+#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */
-+#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */
-+
-+/* NPE messaging_control register bit definitions */
-+#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */
-+#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */
-+#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */
-+#define MSGCTL_IN_FIFO_WRITE 0x02000000
-+
-+/* NPE mailbox_status value for reset */
-+#define RESET_MBOX_STAT 0x0000F0F0
-+
-+const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
-+
-+#define print_npe(pri, npe, fmt, ...) \
-+ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
-+
-+#if DEBUG_MSG
-+#define debug_msg(npe, fmt, ...) \
-+ print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
-+#else
-+#define debug_msg(npe, fmt, ...)
-+#endif
-+
-+static struct {
-+ u32 reg, val;
-+} ecs_reset[] = {
-+ { ECS_BG_CTXT_REG_0, 0xA0000000 },
-+ { ECS_BG_CTXT_REG_1, 0x01000000 },
-+ { ECS_BG_CTXT_REG_2, 0x00008000 },
-+ { ECS_PRI_1_CTXT_REG_0, 0x20000080 },
-+ { ECS_PRI_1_CTXT_REG_1, 0x01000000 },
-+ { ECS_PRI_1_CTXT_REG_2, 0x00008000 },
-+ { ECS_PRI_2_CTXT_REG_0, 0x20000080 },
-+ { ECS_PRI_2_CTXT_REG_1, 0x01000000 },
-+ { ECS_PRI_2_CTXT_REG_2, 0x00008000 },
-+ { ECS_DBG_CTXT_REG_0, 0x20000000 },
-+ { ECS_DBG_CTXT_REG_1, 0x00000000 },
-+ { ECS_DBG_CTXT_REG_2, 0x001E0000 },
-+ { ECS_INSTRUCT_REG, 0x1003C00F },
-+};
-+
-+static struct npe npe_tab[NPE_COUNT] = {
-+ {
-+ .id = 0,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEA_BASE_PHYS,
-+ }, {
-+ .id = 1,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEB_BASE_PHYS,
-+ }, {
-+ .id = 2,
-+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
-+ .regs_phys = IXP4XX_NPEC_BASE_PHYS,
-+ }
-+};
-+
-+int npe_running(struct npe *npe)
-+{
-+ return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
-+}
-+
-+static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
-+{
-+ __raw_writel(data, &npe->regs->exec_data);
-+ __raw_writel(addr, &npe->regs->exec_addr);
-+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
-+}
-+
-+static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
-+{
-+ __raw_writel(addr, &npe->regs->exec_addr);
-+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
-+ /* Iintroduce extra read cycles after issuing read command to NPE
-+ so that we read the register after the NPE has updated it.
-+ This is to overcome race condition between XScale and NPE */
-+ __raw_readl(&npe->regs->exec_data);
-+ __raw_readl(&npe->regs->exec_data);
-+ return __raw_readl(&npe->regs->exec_data);
-+}
-+
-+static void npe_clear_active(struct npe *npe, u32 reg)
-+{
-+ u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
-+ npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
-+}
-+
-+static void npe_start(struct npe *npe)
-+{
-+ /* ensure only Background Context Stack Level is active */
-+ npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
-+ npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
-+ npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
-+
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-+ __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
-+}
-+
-+static void npe_stop(struct npe *npe)
-+{
-+ __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
-+}
-+
-+static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
-+ u32 ldur)
-+{
-+ u32 wc;
-+ int i;
-+
-+ /* set the Active bit, and the LDUR, in the debug level */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
-+ ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
-+
-+ /* set CCTXT at ECS DEBUG L3 to specify in which context to execute
-+ the instruction, and set SELCTXT at ECS DEBUG Level to specify
-+ which context store to access.
-+ Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
-+ */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
-+ (ctx << ECS_REG_1_CCTXT_BITS) |
-+ (ctx << ECS_REG_1_SELCTXT_BITS));
-+
-+ /* clear the pipeline */
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-+
-+ /* load NPE instruction into the instruction register */
-+ npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
-+
-+ /* we need this value later to wait for completion of NPE execution
-+ step */
-+ wc = __raw_readl(&npe->regs->watch_count);
-+
-+ /* issue a Step One command via the Execution Control register */
-+ __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
-+
-+ /* Watch Count register increments when NPE completes an instruction */
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (wc != __raw_readl(&npe->regs->watch_count))
-+ return 0;
-+ udelay(1);
-+ }
-+
-+ print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
-+ return -ETIMEDOUT;
-+}
-+
-+static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
-+ u8 val, u32 ctx)
-+{
-+ /* here we build the NPE assembler instruction: mov8 d0, #0 */
-+ u32 instr = INSTR_WR_REG_BYTE | /* OpCode */
-+ addr << 9 | /* base Operand */
-+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
-+ (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
-+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-+}
-+
-+static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
-+ u16 val, u32 ctx)
-+{
-+ /* here we build the NPE assembler instruction: mov16 d0, #0 */
-+ u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
-+ addr << 9 | /* base Operand */
-+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
-+ (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
-+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-+}
-+
-+static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
-+ u32 val, u32 ctx)
-+{
-+ /* write in 16 bit steps first the high and then the low value */
-+ if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
-+ return -ETIMEDOUT;
-+ return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
-+}
-+
-+static int npe_reset(struct npe *npe)
-+{
-+ u32 val, ctl, exec_count, ctx_reg2;
-+ int i;
-+
-+ ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
-+ 0x3F3FFFFF;
-+
-+ /* disable parity interrupt */
-+ __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
-+
-+ /* pre exec - debug instruction */
-+ /* turn off the halt bit by clearing Execution Count register. */
-+ exec_count = __raw_readl(&npe->regs->exec_count);
-+ __raw_writel(0, &npe->regs->exec_count);
-+ /* ensure that IF and IE are on (temporarily), so that we don't end up
-+ stepping forever */
-+ ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
-+ ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
-+
-+ /* clear the FIFOs */
-+ while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
-+ ;
-+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
-+ /* read from the outFIFO until empty */
-+ print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
-+ __raw_readl(&npe->regs->in_out_fifo));
-+
-+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
-+ /* step execution of the NPE intruction to read inFIFO using
-+ the Debug Executing Context stack */
-+ if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
-+ return -ETIMEDOUT;
-+
-+ /* reset the mailbox reg from the XScale side */
-+ __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
-+ /* from NPE side */
-+ if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
-+ return -ETIMEDOUT;
-+
-+ /* Reset the physical registers in the NPE register file */
-+ for (val = 0; val < NPE_PHYS_REG; val++) {
-+ if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
-+ return -ETIMEDOUT;
-+ /* address is either 0 or 4 */
-+ if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
-+ return -ETIMEDOUT;
-+ }
-+
-+ /* Reset the context store = each context's Context Store registers */
-+
-+ /* Context 0 has no STARTPC. Instead, this value is used to set NextPC
-+ for Background ECS, to set where NPE starts executing code */
-+ val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
-+ val &= ~ECS_REG_0_NEXTPC_MASK;
-+ val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
-+ npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
-+
-+ for (i = 0; i < 16; i++) {
-+ if (i) { /* Context 0 has no STEVT nor STARTPC */
-+ /* STEVT = off, 0x80 */
-+ if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
-+ return -ETIMEDOUT;
-+ if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
-+ return -ETIMEDOUT;
-+ }
-+ /* REGMAP = d0->p0, d8->p2, d16->p4 */
-+ if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
-+ return -ETIMEDOUT;
-+ if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
-+ return -ETIMEDOUT;
-+ }
-+
-+ /* post exec */
-+ /* clear active bit in debug level */
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
-+ /* clear the pipeline */
-+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-+ /* restore previous values */
-+ __raw_writel(exec_count, &npe->regs->exec_count);
-+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
-+
-+ /* write reset values to Execution Context Stack registers */
-+ for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
-+ npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
-+ ecs_reset[val].val);
-+
-+ /* clear the profile counter */
-+ __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
-+
-+ __raw_writel(0, &npe->regs->exec_count);
-+ __raw_writel(0, &npe->regs->action_points[0]);
-+ __raw_writel(0, &npe->regs->action_points[1]);
-+ __raw_writel(0, &npe->regs->action_points[2]);
-+ __raw_writel(0, &npe->regs->action_points[3]);
-+ __raw_writel(0, &npe->regs->watch_count);
-+
-+ val = ixp4xx_read_feature_bits();
-+ /* reset the NPE */
-+ ixp4xx_write_feature_bits(val &
-+ ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (!(ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
-+ break; /* reset completed */
-+ udelay(1);
-+ }
-+ if (i == MAX_RETRIES)
-+ return -ETIMEDOUT;
-+
-+ /* deassert reset */
-+ ixp4xx_write_feature_bits(val |
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id));
-+ for (i = 0; i < MAX_RETRIES; i++) {
-+ if (ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << npe->id))
-+ break; /* NPE is back alive */
-+ udelay(1);
-+ }
-+ if (i == MAX_RETRIES)
-+ return -ETIMEDOUT;
-+
-+ npe_stop(npe);
-+
-+ /* restore NPE configuration bus Control Register - parity settings */
-+ __raw_writel(ctl, &npe->regs->messaging_control);
-+ return 0;
-+}
-+
-+
-+int npe_send_message(struct npe *npe, const void *msg, const char *what)
-+{
-+ const u32 *send = msg;
-+ int cycles = 0;
-+
-+ debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
-+ what, send[0], send[1]);
-+
-+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
-+ debug_msg(npe, "NPE input FIFO not empty\n");
-+ return -EIO;
-+ }
-+
-+ __raw_writel(send[0], &npe->regs->in_out_fifo);
-+
-+ if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
-+ debug_msg(npe, "NPE input FIFO full\n");
-+ return -EIO;
-+ }
-+
-+ __raw_writel(send[1], &npe->regs->in_out_fifo);
-+
-+ while ((cycles < MAX_RETRIES) &&
-+ (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
-+ udelay(1);
-+ cycles++;
-+ }
-+
-+ if (cycles == MAX_RETRIES) {
-+ debug_msg(npe, "Timeout sending message\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ debug_msg(npe, "Sending a message took %i cycles\n", cycles);
-+ return 0;
-+}
-+
-+int npe_recv_message(struct npe *npe, void *msg, const char *what)
-+{
-+ u32 *recv = msg;
-+ int cycles = 0, cnt = 0;
-+
-+ debug_msg(npe, "Trying to receive message %s\n", what);
-+
-+ while (cycles < MAX_RETRIES) {
-+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
-+ recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
-+ if (cnt == 2)
-+ break;
-+ } else {
-+ udelay(1);
-+ cycles++;
-+ }
-+ }
-+
-+ switch(cnt) {
-+ case 1:
-+ debug_msg(npe, "Received [%08X]\n", recv[0]);
-+ break;
-+ case 2:
-+ debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
-+ break;
-+ }
-+
-+ if (cycles == MAX_RETRIES) {
-+ debug_msg(npe, "Timeout waiting for message\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
-+ return 0;
-+}
-+
-+int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
-+{
-+ int result;
-+ u32 *send = msg, recv[2];
-+
-+ if ((result = npe_send_message(npe, msg, what)) != 0)
-+ return result;
-+ if ((result = npe_recv_message(npe, recv, what)) != 0)
-+ return result;
-+
-+ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
-+ debug_msg(npe, "Message %s: unexpected message received\n",
-+ what);
-+ return -EIO;
-+ }
-+ return 0;
-+}
-+
-+
-+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
-+{
-+ const struct firmware *fw_entry;
-+
-+ struct dl_block {
-+ u32 type;
-+ u32 offset;
-+ } *blk;
-+
-+ struct dl_image {
-+ u32 magic;
-+ u32 id;
-+ u32 size;
-+ union {
-+ u32 data[0];
-+ struct dl_block blocks[0];
-+ };
-+ } *image;
-+
-+ struct dl_codeblock {
-+ u32 npe_addr;
-+ u32 size;
-+ u32 data[0];
-+ } *cb;
-+
-+ int i, j, err, data_size, instr_size, blocks, table_end;
-+ u32 cmd;
-+
-+ if ((err = request_firmware(&fw_entry, name, dev)) != 0)
-+ return err;
-+
-+ err = -EINVAL;
-+ if (fw_entry->size < sizeof(struct dl_image)) {
-+ print_npe(KERN_ERR, npe, "incomplete firmware file\n");
-+ goto err;
-+ }
-+ image = (struct dl_image*)fw_entry->data;
-+
-+#if DEBUG_FW
-+ print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
-+ image->magic, image->id, image->size, image->size * 4);
-+#endif
-+
-+ if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
-+ image->id = swab32(image->id);
-+ image->size = swab32(image->size);
-+ } else if (image->magic != FW_MAGIC) {
-+ print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
-+ image->magic);
-+ goto err;
-+ }
-+ if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
-+ print_npe(KERN_ERR, npe,
-+ "inconsistent size of firmware file\n");
-+ goto err;
-+ }
-+ if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
-+ print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
-+ goto err;
-+ }
-+ if (image->magic == swab32(FW_MAGIC))
-+ for (i = 0; i < image->size; i++)
-+ image->data[i] = swab32(image->data[i]);
-+
-+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
-+ print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
-+ "IXP42x\n");
-+ goto err;
-+ }
-+
-+ if (npe_running(npe)) {
-+ print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
-+ "already running\n");
-+ err = -EBUSY;
-+ goto err;
-+ }
-+#if 0
-+ npe_stop(npe);
-+ npe_reset(npe);
-+#endif
-+
-+ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
-+ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
-+ (image->id >> 8) & 0xFF, image->id & 0xFF);
-+
-+ if (!cpu_is_ixp46x()) {
-+ if (!npe->id)
-+ instr_size = NPE_A_42X_INSTR_SIZE;
-+ else
-+ instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
-+ data_size = NPE_42X_DATA_SIZE;
-+ } else {
-+ instr_size = NPE_46X_INSTR_SIZE;
-+ data_size = NPE_46X_DATA_SIZE;
-+ }
-+
-+ for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
-+ blocks++)
-+ if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
-+ break;
-+ if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
-+ print_npe(KERN_INFO, npe, "firmware EOF block marker not "
-+ "found\n");
-+ goto err;
-+ }
-+
-+#if DEBUG_FW
-+ print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
-+#endif
-+
-+ table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
-+ for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
-+ if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
-+ || blk->offset < table_end) {
-+ print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
-+ "firmware block #%i\n", blk->offset, i);
-+ goto err;
-+ }
-+
-+ cb = (struct dl_codeblock*)&image->data[blk->offset];
-+ if (blk->type == FW_BLOCK_TYPE_INSTR) {
-+ if (cb->npe_addr + cb->size > instr_size)
-+ goto too_big;
-+ cmd = CMD_WR_INS_MEM;
-+ } else if (blk->type == FW_BLOCK_TYPE_DATA) {
-+ if (cb->npe_addr + cb->size > data_size)
-+ goto too_big;
-+ cmd = CMD_WR_DATA_MEM;
-+ } else {
-+ print_npe(KERN_INFO, npe, "invalid firmware block #%i "
-+ "type 0x%X\n", i, blk->type);
-+ goto err;
-+ }
-+ if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
-+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
-+ "fit in firmware image: type %c, start 0x%X,"
-+ " length 0x%X\n", i,
-+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-+ cb->npe_addr, cb->size);
-+ goto err;
-+ }
-+
-+ for (j = 0; j < cb->size; j++)
-+ npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
-+ }
-+
-+ npe_start(npe);
-+ if (!npe_running(npe))
-+ print_npe(KERN_ERR, npe, "unable to start\n");
-+ release_firmware(fw_entry);
-+ return 0;
-+
-+too_big:
-+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
-+ "memory: type %c, start 0x%X, length 0x%X\n", i,
-+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-+ cb->npe_addr, cb->size);
-+err:
-+ release_firmware(fw_entry);
-+ return err;
-+}
-+
-+
-+struct npe *npe_request(int id)
-+{
-+ if (id < NPE_COUNT)
-+ if (npe_tab[id].valid)
-+ if (try_module_get(THIS_MODULE))
-+ return &npe_tab[id];
-+ return NULL;
-+}
-+
-+void npe_release(struct npe *npe)
-+{
-+ module_put(THIS_MODULE);
-+}
-+
-+
-+static int __init npe_init_module(void)
-+{
-+
-+ int i, found = 0;
-+
-+ for (i = 0; i < NPE_COUNT; i++) {
-+ struct npe *npe = &npe_tab[i];
-+ if (!(ixp4xx_read_feature_bits() &
-+ (IXP4XX_FEATURE_RESET_NPEA << i)))
-+ continue; /* NPE already disabled or not present */
-+ if (!(npe->mem_res = request_mem_region(npe->regs_phys,
-+ REGS_SIZE,
-+ npe_name(npe)))) {
-+ print_npe(KERN_ERR, npe,
-+ "failed to request memory region\n");
-+ continue;
-+ }
-+
-+ if (npe_reset(npe))
-+ continue;
-+ npe->valid = 1;
-+ found++;
-+ }
-+
-+ if (!found)
-+ return -ENOSYS;
-+ return 0;
-+}
-+
-+static void __exit npe_cleanup_module(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < NPE_COUNT; i++)
-+ if (npe_tab[i].mem_res) {
-+ npe_reset(&npe_tab[i]);
-+ release_resource(npe_tab[i].mem_res);
-+ }
-+}
-+
-+module_init(npe_init_module);
-+module_exit(npe_cleanup_module);
-+
-+MODULE_AUTHOR("Krzysztof Halasa");
-+MODULE_LICENSE("GPL v2");
-+
-+EXPORT_SYMBOL(npe_names);
-+EXPORT_SYMBOL(npe_running);
-+EXPORT_SYMBOL(npe_request);
-+EXPORT_SYMBOL(npe_release);
-+EXPORT_SYMBOL(npe_load_firmware);
-+EXPORT_SYMBOL(npe_send_message);
-+EXPORT_SYMBOL(npe_recv_message);
-+EXPORT_SYMBOL(npe_send_recv_message);
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/platform.h
-@@ -102,6 +102,27 @@ struct ixp4xx_pata_data {
-
- struct sys_timer;
-
-+#define IXP4XX_ETH_NPEA 0x00
-+#define IXP4XX_ETH_NPEB 0x10
-+#define IXP4XX_ETH_NPEC 0x20
-+
-+/* Information about built-in Ethernet MAC interfaces */
-+struct eth_plat_info {
-+ u8 phy; /* MII PHY ID, 0 - 31 */
-+ u8 rxq; /* configurable, currently 0 - 31 only */
-+ u8 txreadyq;
-+ u8 hwaddr[6];
-+};
-+
-+/* Information about built-in HSS (synchronous serial) interfaces */
-+struct hss_plat_info {
-+ int (*set_clock)(int port, unsigned int clock_type);
-+ int (*open)(int port, void *pdev,
-+ void (*set_carrier_cb)(void *pdev, int carrier));
-+ void (*close)(int port, void *pdev);
-+ u8 txreadyq;
-+};
-+
- /*
- * Frequency of clock used for primary clocksource
- */
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -177,6 +177,31 @@ static struct platform_device ixdp425_ua
- .resource = ixdp425_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdp425_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ixdp425_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ixdp425_plat_eth,
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ixdp425_plat_eth + 1,
-+ }
-+};
-+
- static struct platform_device *ixdp425_devices[] __initdata = {
- &ixdp425_i2c_gpio,
- &ixdp425_flash,
-@@ -184,7 +209,9 @@ static struct platform_device *ixdp425_d
- defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
- &ixdp425_flash_nand,
- #endif
-- &ixdp425_uart
-+ &ixdp425_uart,
-+ &ixdp425_eth[0],
-+ &ixdp425_eth[1],
- };
-
- static void __init ixdp425_init(void)
diff --git a/target/linux/ixp4xx/patches-2.6.24/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-2.6.24/201-npe_driver_print_license_location.patch
deleted file mode 100644
index 53cad0dc84..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/201-npe_driver_print_license_location.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -588,6 +588,8 @@ int npe_load_firmware(struct npe *npe, c
- npe_reset(npe);
- #endif
-
-+ print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
-+
- print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
- "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
- (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-2.6.24/202-npe_driver_switch_support.patch b/target/linux/ixp4xx/patches-2.6.24/202-npe_driver_switch_support.patch
deleted file mode 100644
index 1604743850..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/202-npe_driver_switch_support.patch
+++ /dev/null
@@ -1,252 +0,0 @@
-Index: linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-@@ -165,14 +165,15 @@ struct port {
- struct net_device *netdev;
- struct napi_struct napi;
- struct net_device_stats stat;
-- struct mii_if_info mii;
-+ struct mii_if_info mii[IXP4XX_ETH_PHY_MAX_ADDR];
- struct delayed_work mdio_thread;
- struct eth_plat_info *plat;
- buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
- struct desc *desc_tab; /* coherent */
- u32 desc_tab_phys;
- int id; /* logical port ID */
-- u16 mii_bmcr;
-+ u16 mii_bmcr[IXP4XX_ETH_PHY_MAX_ADDR];
-+ int phy_count;
- };
-
- /* NPE message structure */
-@@ -316,13 +317,14 @@ static void mdio_write(struct net_device
- spin_unlock_irqrestore(&mdio_lock, flags);
- }
-
--static void phy_reset(struct net_device *dev, int phy_id)
-+static void phy_reset(struct net_device *dev, int idx)
- {
- struct port *port = netdev_priv(dev);
-+ int phy_id = port->mii[idx].phy_id;
- int cycles = 0;
-
-- mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
--
-+ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_RESET);
-+
- while (cycles < MAX_MII_RESET_RETRIES) {
- if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
- #if DEBUG_MDIO
-@@ -335,12 +337,12 @@ static void phy_reset(struct net_device
- cycles++;
- }
-
-- printk(KERN_ERR "%s: MII reset failed\n", dev->name);
-+ printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name, phy_id);
- }
-
--static void eth_set_duplex(struct port *port)
-+static void eth_set_duplex(struct port *port, int full_duplex)
- {
-- if (port->mii.full_duplex)
-+ if (full_duplex)
- __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
- else
-@@ -348,7 +350,7 @@ static void eth_set_duplex(struct port *
- &port->regs->tx_control[0]);
- }
-
--
-+#if 0
- static void phy_check_media(struct port *port, int init)
- {
- if (mii_check_media(&port->mii, 1, init))
-@@ -367,7 +369,63 @@ static void phy_check_media(struct port
- }
- }
- }
-+#else
-+static void phy_update_link(struct net_device *dev, int link)
-+{
-+ int prev_link = netif_carrier_ok(dev);
-+
-+ if (!prev_link && link) {
-+ printk(KERN_INFO "%s: link up\n", dev->name);
-+ netif_carrier_on(dev);
-+ } else if (prev_link && !link) {
-+ printk(KERN_INFO "%s: link down\n", dev->name);
-+ netif_carrier_off(dev);
-+ }
-+}
-+
-+static void phy_check_media(struct port *port, int init)
-+{
-+ struct net_device *dev = port->netdev;
-+
-+ if (port->phy_count == 1) {
-+ struct mii_if_info *mii = &port->mii[0];
-+
-+ if (mii_check_media(mii, 1, init))
-+ eth_set_duplex(port, mii->full_duplex);
-+
-+ if (mii->force_media) /* mii_check_media() doesn't work */
-+ phy_update_link(dev, mii_link_ok(mii));
-+ } else {
-+ int cur_link = 0;
-+ int i;
-+
-+ if (init)
-+ eth_set_duplex(port, 1);
-+
-+ for (i = 0; i < port->phy_count; i++)
-+ cur_link |= mii_link_ok(&port->mii[i]);
-+
-+ phy_update_link(dev, cur_link);
-+ }
-+}
-+#endif
-
-+static void phy_power_down(struct net_device *dev, int idx)
-+{
-+ struct port *port = netdev_priv(dev);
-+ int phy_id = port->mii[idx].phy_id;
-+
-+ port->mii_bmcr[idx] = mdio_read(dev, phy_id, MII_BMCR) &
-+ ~(BMCR_RESET | BMCR_PDOWN);
-+ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_PDOWN);
-+}
-+
-+static void phy_power_up(struct net_device *dev, int idx)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ mdio_write(dev, port->mii[idx].phy_id, MII_BMCR, port->mii_bmcr[idx]);
-+}
-
- static void mdio_thread(struct work_struct *work)
- {
-@@ -790,9 +848,12 @@ static int eth_ioctl(struct net_device *
-
- if (!netif_running(dev))
- return -EINVAL;
-- err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
-+ if (port->phy_count != 1)
-+ return -EOPNOTSUPP;
-+
-+ err = generic_mii_ioctl(&port->mii[0], if_mii(req), cmd, &duplex_chg);
- if (duplex_chg)
-- eth_set_duplex(port);
-+ eth_set_duplex(port, port->mii[0].full_duplex);
- return err;
- }
-
-@@ -944,7 +1005,8 @@ static int eth_open(struct net_device *d
- }
- }
-
-- mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
-+ for (i = 0; i < port->phy_count; i++)
-+ phy_power_up(dev, i);
-
- memset(&msg, 0, sizeof(msg));
- msg.cmd = NPE_VLAN_SETRXQOSENTRY;
-@@ -1103,10 +1165,8 @@ static int eth_close(struct net_device *
- printk(KERN_CRIT "%s: unable to disable loopback\n",
- dev->name);
-
-- port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
-- ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
-- mdio_write(dev, port->plat->phy, MII_BMCR,
-- port->mii_bmcr | BMCR_PDOWN);
-+ for (i = 0; i < port->phy_count; i++)
-+ phy_power_down(dev, i);
-
- if (!ports_open)
- qmgr_disable_irq(TXDONE_QUEUE);
-@@ -1117,6 +1177,42 @@ static int eth_close(struct net_device *
- return 0;
- }
-
-+static void eth_add_phy(struct net_device *dev, int phy_id)
-+{
-+ struct port *port = netdev_priv(dev);
-+ int i;
-+
-+ i = port->phy_count++;
-+
-+ port->mii[i].dev = dev;
-+ port->mii[i].mdio_read = mdio_read;
-+ port->mii[i].mdio_write = mdio_write;
-+ port->mii[i].phy_id = phy_id;
-+ port->mii[i].phy_id_mask = 0x1F;
-+ port->mii[i].reg_num_mask = 0x1F;
-+
-+ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, phy_id,
-+ npe_name(port->npe));
-+
-+ phy_reset(dev, i);
-+ phy_power_down(dev, i);
-+}
-+
-+static void eth_init_mii(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ if (port->plat->phy < IXP4XX_ETH_PHY_MAX_ADDR) {
-+ eth_add_phy(dev, port->plat->phy);
-+ } else {
-+ int i;
-+ for (i = 0; i < IXP4XX_ETH_PHY_MAX_ADDR; i++)
-+ if (port->plat->phy_mask & (1U << i))
-+ eth_add_phy(dev, i);
-+ }
-+
-+}
-+
- static int __devinit eth_init_one(struct platform_device *pdev)
- {
- struct port *port;
-@@ -1189,20 +1285,7 @@ static int __devinit eth_init_one(struct
- __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
- udelay(50);
-
-- port->mii.dev = dev;
-- port->mii.mdio_read = mdio_read;
-- port->mii.mdio_write = mdio_write;
-- port->mii.phy_id = plat->phy;
-- port->mii.phy_id_mask = 0x1F;
-- port->mii.reg_num_mask = 0x1F;
--
-- printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
-- npe_name(port->npe));
--
-- phy_reset(dev, plat->phy);
-- port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
-- ~(BMCR_RESET | BMCR_PDOWN);
-- mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
-+ eth_init_mii(dev);
-
- INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
- return 0;
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/platform.h
-@@ -106,12 +106,15 @@ struct sys_timer;
- #define IXP4XX_ETH_NPEB 0x10
- #define IXP4XX_ETH_NPEC 0x20
-
-+#define IXP4XX_ETH_PHY_MAX_ADDR 32
-+
- /* Information about built-in Ethernet MAC interfaces */
- struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-+ u32 phy_mask;
- };
-
- /* Information about built-in HSS (synchronous serial) interfaces */
diff --git a/target/linux/ixp4xx/patches-2.6.24/203-npe_driver_phy_reset_autoneg.patch b/target/linux/ixp4xx/patches-2.6.24/203-npe_driver_phy_reset_autoneg.patch
deleted file mode 100644
index 0788ce3338..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/203-npe_driver_phy_reset_autoneg.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-Index: linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-@@ -322,8 +322,12 @@ static void phy_reset(struct net_device
- struct port *port = netdev_priv(dev);
- int phy_id = port->mii[idx].phy_id;
- int cycles = 0;
-+ u16 bmcr;
-
-- mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_RESET);
-+ /* reset the PHY */
-+ bmcr = mdio_read(dev, phy_id, MII_BMCR);
-+ bmcr |= BMCR_ANENABLE;
-+ mdio_write(dev, phy_id, MII_BMCR, bmcr | BMCR_RESET);
-
- while (cycles < MAX_MII_RESET_RETRIES) {
- if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-@@ -331,13 +335,23 @@ static void phy_reset(struct net_device
- printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
- dev->name, cycles);
- #endif
-- return;
-+ break;
- }
- udelay(1);
- cycles++;
- }
-
-- printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name, phy_id);
-+ if (cycles == MAX_MII_RESET_RETRIES) {
-+ printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name,
-+ phy_id);
-+ return;
-+ }
-+
-+ /* restart auto negotiation */
-+ bmcr = mdio_read(dev, phy_id, MII_BMCR);
-+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-+ mdio_write(dev, phy_id, MII_BMCR, bmcr);
-+
- }
-
- static void eth_set_duplex(struct port *port, int full_duplex)
diff --git a/target/linux/ixp4xx/patches-2.6.24/204-npe_driver_ixp43x_support.patch b/target/linux/ixp4xx/patches-2.6.24/204-npe_driver_ixp43x_support.patch
deleted file mode 100644
index 1bd576d896..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/204-npe_driver_ixp43x_support.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -571,8 +571,8 @@ int npe_load_firmware(struct npe *npe, c
- for (i = 0; i < image->size; i++)
- image->data[i] = swab32(image->data[i]);
-
-- if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
-- print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
-+ if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
-+ print_npe(KERN_INFO, npe, "IXP46x/IXP43x firmware ignored on "
- "IXP42x\n");
- goto err;
- }
-@@ -594,7 +594,7 @@ int npe_load_firmware(struct npe *npe, c
- "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
- (image->id >> 8) & 0xFF, image->id & 0xFF);
-
-- if (!cpu_is_ixp46x()) {
-+ if (cpu_is_ixp42x()) {
- if (!npe->id)
- instr_size = NPE_A_42X_INSTR_SIZE;
- else
-Index: linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-@@ -32,6 +32,7 @@
- #include <linux/kernel.h>
- #include <linux/mii.h>
- #include <linux/platform_device.h>
-+#include <asm/arch/cpu.h>
- #include <asm/arch/npe.h>
- #include <asm/arch/qmgr.h>
-
-@@ -1335,12 +1336,16 @@ static struct platform_driver drv = {
-
- static int __init eth_init_module(void)
- {
-- if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
-- return -ENOSYS;
-
-- /* All MII PHY accesses use NPE-B Ethernet registers */
- spin_lock_init(&mdio_lock);
-- mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-+ if (!cpu_is_ixp43x())
-+ /* All MII PHY accesses use NPE-B Ethernet registers */
-+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-+
-+ else
-+ /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
-+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
-+
- __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
-
- return platform_driver_register(&drv);
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/cpu.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/cpu.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/cpu.h
-@@ -34,6 +34,8 @@ static inline u32 ixp4xx_read_feature_bi
- val &= ~IXP4XX_FEATURE_RESERVED;
- if (!cpu_is_ixp46x())
- val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
-+ if (cpu_is_ixp42x())
-+ val &= ~IXP4XX_FEATURE_IXP43X_46X;
-
- return val;
- }
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-@@ -628,11 +628,12 @@
- #define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
- #define IXP4XX_FEATURE_RESERVED (0xFF << 24)
-
--#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
-+#define IXP4XX_FEATURE_IXP43X_46X (IXP4XX_FEATURE_ECC_TIMESYNC | \
- IXP4XX_FEATURE_USB_HOST | \
- IXP4XX_FEATURE_NPEA_ETH | \
-- IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
-- IXP4XX_FEATURE_RSA | \
- IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-
-+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
-+ IXP4XX_FEATURE_RSA)
-+
- #endif
diff --git a/target/linux/ixp4xx/patches-2.6.24/250-compex_switch_support.patch b/target/linux/ixp4xx/patches-2.6.24/250-compex_switch_support.patch
deleted file mode 100644
index 2fb31c4af9..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/250-compex_switch_support.patch
+++ /dev/null
@@ -1,14 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/compex-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -93,7 +93,8 @@ static struct platform_device compex_uar
- /* Built-in 10/100 Ethernet MAC interfaces */
- static struct eth_plat_info compex_plat_eth[] = {
- {
-- .phy = -1,
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0xf0000, /* port 0-4 of the Marvell switch */
- .rxq = 3,
- .txreadyq = 20,
- }, {
diff --git a/target/linux/ixp4xx/patches-2.6.24/294-eeprom_new_notifier.patch b/target/linux/ixp4xx/patches-2.6.24/294-eeprom_new_notifier.patch
deleted file mode 100644
index d95c94d04b..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/294-eeprom_new_notifier.patch
+++ /dev/null
@@ -1,190 +0,0 @@
-Index: linux-2.6.24.7/drivers/i2c/chips/eeprom.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/i2c/chips/eeprom.c
-+++ linux-2.6.24.7/drivers/i2c/chips/eeprom.c
-@@ -33,6 +33,8 @@
- #include <linux/jiffies.h>
- #include <linux/i2c.h>
- #include <linux/mutex.h>
-+#include <linux/notifier.h>
-+#include <linux/eeprom.h>
-
- /* Addresses to scan */
- static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
-@@ -41,26 +43,7 @@ static unsigned short normal_i2c[] = { 0
- /* Insmod parameters */
- I2C_CLIENT_INSMOD_1(eeprom);
-
--
--/* Size of EEPROM in bytes */
--#define EEPROM_SIZE 256
--
--/* possible types of eeprom devices */
--enum eeprom_nature {
-- UNKNOWN,
-- VAIO,
--};
--
--/* Each client has this additional data */
--struct eeprom_data {
-- struct i2c_client client;
-- struct mutex update_lock;
-- u8 valid; /* bitfield, bit!=0 if slice is valid */
-- unsigned long last_updated[8]; /* In jiffies, 8 slices */
-- u8 data[EEPROM_SIZE]; /* Register values */
-- enum eeprom_nature nature;
--};
--
-+ATOMIC_NOTIFIER_HEAD(eeprom_chain);
-
- static int eeprom_attach_adapter(struct i2c_adapter *adapter);
- static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
-@@ -198,6 +181,7 @@ static int eeprom_detect(struct i2c_adap
- data->valid = 0;
- mutex_init(&data->update_lock);
- data->nature = UNKNOWN;
-+ data->attr = &eeprom_attr;
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
-@@ -225,6 +209,9 @@ static int eeprom_detect(struct i2c_adap
- if (err)
- goto exit_detach;
-
-+ /* call the notifier chain */
-+ atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
-+
- return 0;
-
- exit_detach:
-@@ -250,6 +237,41 @@ static int eeprom_detach_client(struct i
- return 0;
- }
-
-+/**
-+ * register_eeprom_notifier - register a 'user' of EEPROM devices.
-+ * @nb: pointer to notifier info structure
-+ *
-+ * Registers a callback function to be called upon detection
-+ * of an EEPROM device. Detection invokes the 'add' callback
-+ * with the kobj of the mutex and a bin_attribute which allows
-+ * read from the EEPROM. The intention is that the notifier
-+ * will be able to read system configuration from the notifier.
-+ *
-+ * Only EEPROMs detected *after* the addition of the notifier
-+ * are notified. I.e. EEPROMs already known to the system
-+ * will not be notified - add the notifier from board level
-+ * code!
-+ */
-+int register_eeprom_notifier(struct notifier_block *nb)
-+{
-+ return atomic_notifier_chain_register(&eeprom_chain, nb);
-+}
-+
-+/**
-+ * unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
-+ * @old: pointer to notifier info structure
-+ *
-+ * Removes a callback function from the list of 'users' to be
-+ * notified upon detection of EEPROM devices.
-+ */
-+int unregister_eeprom_notifier(struct notifier_block *nb)
-+{
-+ return atomic_notifier_chain_unregister(&eeprom_chain, nb);
-+}
-+
-+EXPORT_SYMBOL_GPL(register_eeprom_notifier);
-+EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
-+
- static int __init eeprom_init(void)
- {
- return i2c_add_driver(&eeprom_driver);
-Index: linux-2.6.24.7/include/linux/eeprom.h
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/include/linux/eeprom.h
-@@ -0,0 +1,71 @@
-+#ifndef _LINUX_EEPROM_H
-+#define _LINUX_EEPROM_H
-+/*
-+ * EEPROM notifier header
-+ *
-+ * Copyright (C) 2006 John Bowler
-+ */
-+
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __KERNEL__
-+#error This is a kernel header
-+#endif
-+
-+#include <linux/list.h>
-+#include <linux/kobject.h>
-+#include <linux/sysfs.h>
-+
-+/* Size of EEPROM in bytes */
-+#define EEPROM_SIZE 256
-+
-+/* possible types of eeprom devices */
-+enum eeprom_nature {
-+ UNKNOWN,
-+ VAIO,
-+};
-+
-+/* Each client has this additional data */
-+struct eeprom_data {
-+ struct i2c_client client;
-+ struct mutex update_lock;
-+ u8 valid; /* bitfield, bit!=0 if slice is valid */
-+ unsigned long last_updated[8]; /* In jiffies, 8 slices */
-+ u8 data[EEPROM_SIZE]; /* Register values */
-+ enum eeprom_nature nature;
-+ struct bin_attribute *attr;
-+};
-+
-+/*
-+ * This is very basic.
-+ *
-+ * If an EEPROM is detected on the I2C bus (this only works for
-+ * I2C EEPROMs) the notifier chain is called with
-+ * both the I2C information and the kobject for the sysfs
-+ * device which has been registers. It is then possible to
-+ * read from the device via the bin_attribute::read method
-+ * to extract configuration information.
-+ *
-+ * Register the notifier in the board level code, there is no
-+ * need to unregister it but you can if you want (it will save
-+ * a little bit or kernel memory to do so).
-+ */
-+
-+extern int register_eeprom_notifier(struct notifier_block *nb);
-+extern int unregister_eeprom_notifier(struct notifier_block *nb);
-+
-+#endif /* _LINUX_EEPROM_H */
-Index: linux-2.6.24.7/include/linux/notifier.h
-===================================================================
---- linux-2.6.24.7.orig/include/linux/notifier.h
-+++ linux-2.6.24.7/include/linux/notifier.h
-@@ -248,5 +248,8 @@ extern struct blocking_notifier_head reb
- #define VT_WRITE 0x0003 /* A char got output */
- #define VT_UPDATE 0x0004 /* A bigger update occurred */
-
-+/* eeprom notifier chain */
-+#define EEPROM_REGISTER 0x0001
-+
- #endif /* __KERNEL__ */
- #endif /* _LINUX_NOTIFIER_H */
diff --git a/target/linux/ixp4xx/patches-2.6.24/296-avila_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.24/296-avila_mac_plat_info.patch
deleted file mode 100644
index 3fdb52f04e..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/296-avila_mac_plat_info.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -132,6 +132,31 @@ static struct platform_device avila_pata
- .resource = avila_pata_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info avila_npeb_data = {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info avila_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device avila_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &avila_npeb_data,
-+};
-+
-+static struct platform_device avila_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &avila_npec_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
-@@ -159,6 +184,8 @@ static void __init avila_init(void)
-
- platform_device_register(&avila_pata);
-
-+ platform_device_register(avila_npeb_device);
-+ platform_device_register(avila_npec_device);
- }
-
- MACHINE_START(AVILA, "Gateworks Avila Network Platform")
diff --git a/target/linux/ixp4xx/patches-2.6.24/300-avila_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.24/300-avila_fetch_mac.patch
deleted file mode 100644
index a266cced02..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/300-avila_fetch_mac.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -14,10 +14,18 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#ifdef CONFIG_SENSORS_EEPROM
-+# include <linux/i2c.h>
-+# include <linux/eeprom.h>
-+#endif
-+
- #include <linux/i2c-gpio.h>
-
- #include <asm/types.h>
-@@ -29,6 +37,13 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-
-+struct avila_board_info {
-+ unsigned char *model;
-+ void (* setup)(void);
-+};
-+
-+static struct avila_board_info *avila_info __initdata;
-+
- static struct flash_platform_data avila_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-@@ -163,10 +178,160 @@ static struct platform_device *avila_dev
- &avila_uart
- };
-
-+static void __init avila_gw23xx_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+#ifdef CONFIG_SENSORS_EEPROM
-+static void __init avila_gw2342_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2345_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2347_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static void __init avila_gw2348_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2353_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static void __init avila_gw2355_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 16;
-+ platform_device_register(&avila_npec_device);
-+}
-+
-+static void __init avila_gw2357_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+}
-+
-+static struct avila_board_info avila_boards[] __initdata = {
-+ {
-+ .model = "GW2342",
-+ .setup = avila_gw2342_setup,
-+ }, {
-+ .model = "GW2345",
-+ .setup = avila_gw2345_setup,
-+ }, {
-+ .model = "GW2347",
-+ .setup = avila_gw2347_setup,
-+ }, {
-+ .model = "GW2348",
-+ .setup = avila_gw2348_setup,
-+ }, {
-+ .model = "GW2353",
-+ .setup = avila_gw2353_setup,
-+ }, {
-+ .model = "GW2355",
-+ .setup = avila_gw2355_setup,
-+ }, {
-+ .model = "GW2357",
-+ .setup = avila_gw2357_setup,
-+ }
-+};
-+
-+static struct avila_board_info * __init avila_find_board_info(char *model)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
-+ struct avila_board_info *info = &avila_boards[i];
-+ if (strncmp(info->model, model, strlen(info->model)) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+struct avila_eeprom_header {
-+ unsigned char mac0[ETH_ALEN];
-+ unsigned char mac1[ETH_ALEN];
-+ unsigned char res0[4];
-+ unsigned char magic[2];
-+ unsigned char config[14];
-+ unsigned char model[16];
-+};
-+
-+static int __init avila_eeprom_notify(struct notifier_block *self,
-+ unsigned long event, void *t)
-+{
-+ struct eeprom_data *ee = t;
-+ struct avila_eeprom_header hdr;
-+
-+ if (avila_info)
-+ return NOTIFY_DONE;
-+
-+ /* The eeprom is at address 0x51 */
-+ if (event != EEPROM_REGISTER || ee->client.addr != 0x51)
-+ return NOTIFY_DONE;
-+
-+ ee->attr->read(&ee->client.dev.kobj, ee->attr, (char *)&hdr,
-+ 0, sizeof(hdr));
-+
-+ if (hdr.magic[0] != 'G' || hdr.magic[1] != 'W')
-+ return NOTIFY_DONE;
-+
-+ memcpy(&avila_npeb_data.hwaddr, hdr.mac0, ETH_ALEN);
-+ memcpy(&avila_npec_data.hwaddr, hdr.mac1, ETH_ALEN);
-+
-+ avila_info = avila_find_board_info(hdr.model);
-+
-+ return NOTIFY_OK;
-+}
-+
-+static struct notifier_block avila_eeprom_notifier __initdata = {
-+ .notifier_call = avila_eeprom_notify
-+};
-+
-+static void __init avila_register_eeprom_notifier(void)
-+{
-+ register_eeprom_notifier(&avila_eeprom_notifier);
-+}
-+
-+static void __init avila_unregister_eeprom_notifier(void)
-+{
-+ unregister_eeprom_notifier(&avila_eeprom_notifier);
-+}
-+#else /* CONFIG_SENSORS_EEPROM */
-+static inline void avila_register_eeprom_notifier(void) {};
-+static inline void avila_unregister_eeprom_notifier(void) {};
-+#endif /* CONFIG_SENSORS_EEPROM */
-+
- static void __init avila_init(void)
- {
- ixp4xx_sys_init();
-
-+ /*
-+ * These devices are present on all Avila models and don't need any
-+ * model specific setup.
-+ */
- avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- avila_flash_resource.end =
- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-@@ -184,9 +349,28 @@ static void __init avila_init(void)
-
- platform_device_register(&avila_pata);
-
-- platform_device_register(avila_npeb_device);
-- platform_device_register(avila_npec_device);
-+ avila_register_eeprom_notifier();
-+}
-+
-+static int __init avila_model_setup(void)
-+{
-+ if (!machine_is_avila())
-+ return 0;
-+
-+ if (avila_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
-+ avila_info->model);
-+ avila_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Avila model number"
-+ " -- defaults will be used\n");
-+ avila_gw23xx_setup();
-+ }
-+
-+ avila_unregister_eeprom_notifier();
-+ return 0;
- }
-+late_initcall(avila_model_setup);
-
- MACHINE_START(AVILA, "Gateworks Avila Network Platform")
- /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
diff --git a/target/linux/ixp4xx/patches-2.6.24/301-avila_led.patch b/target/linux/ixp4xx/patches-2.6.24/301-avila_led.patch
deleted file mode 100644
index 81282fac9a..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/301-avila_led.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/avila.h
-@@ -36,4 +36,6 @@
- #define AVILA_PCI_INTC_PIN 9
- #define AVILA_PCI_INTD_PIN 8
-
--
-+/* User LEDs */
-+#define AVILA_GW23XX_LED_USER_GPIO 3
-+#define AVILA_GW23X7_LED_USER_GPIO 4
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -26,6 +26,7 @@
- # include <linux/eeprom.h>
- #endif
-
-+#include <linux/leds.h>
- #include <linux/i2c-gpio.h>
-
- #include <asm/types.h>
-@@ -172,6 +173,25 @@ static struct platform_device avila_npec
- .dev.platform_data = &avila_npec_data,
- };
-
-+static struct gpio_led avila_leds[] = {
-+ {
-+ .name = "user", /* green led */
-+ .gpio = AVILA_GW23XX_LED_USER_GPIO,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_led_platform_data avila_leds_data = {
-+ .num_leds = 1,
-+ .leds = avila_leds,
-+};
-+
-+static struct platform_device avila_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &avila_leds_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
-@@ -182,6 +202,8 @@ static void __init avila_gw23xx_setup(vo
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_leds_device);
- }
-
- #ifdef CONFIG_SENSORS_EEPROM
-@@ -189,6 +211,8 @@ static void __init avila_gw2342_setup(vo
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_leds_device);
- }
-
- static void __init avila_gw2345_setup(void)
-@@ -199,22 +223,30 @@ static void __init avila_gw2345_setup(vo
-
- avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_leds_device);
- }
-
- static void __init avila_gw2347_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+
-+ avila_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_leds_device);
- }
-
- static void __init avila_gw2348_setup(void)
- {
- platform_device_register(&avila_npeb_device);
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_leds_device);
- }
-
- static void __init avila_gw2353_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_leds_device);
- }
-
- static void __init avila_gw2355_setup(void)
-@@ -225,11 +257,16 @@ static void __init avila_gw2355_setup(vo
-
- avila_npec_data.phy = 16;
- platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_leds_device);
- }
-
- static void __init avila_gw2357_setup(void)
- {
- platform_device_register(&avila_npeb_device);
-+
-+ avila_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_leds_device);
- }
-
- static struct avila_board_info avila_boards[] __initdata = {
diff --git a/target/linux/ixp4xx/patches-2.6.24/302-avila_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.24/302-avila_gpio_device.patch
deleted file mode 100644
index eb14f7db11..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/302-avila_gpio_device.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -192,10 +192,28 @@ static struct platform_device avila_leds
- .dev.platform_data = &avila_leds_data,
- };
-
-+static struct resource avila_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ /* FIXME: gpio mask should be model specific */
-+ .start = AVILA_GPIO_MASK,
-+ .end = AVILA_GPIO_MASK,
-+ .flags = 0,
-+ },
-+};
-+
-+static struct platform_device avila_gpio = {
-+ .name = "GPIODEV",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(avila_gpio_resources),
-+ .resource = avila_gpio_resources,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
- &avila_flash,
-- &avila_uart
-+ &avila_uart,
-+ &avila_gpio,
- };
-
- static void __init avila_gw23xx_setup(void)
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/avila.h
-@@ -39,3 +39,6 @@
- /* User LEDs */
- #define AVILA_GW23XX_LED_USER_GPIO 3
- #define AVILA_GW23X7_LED_USER_GPIO 4
-+
-+/* gpio mask used by platform device */
-+#define AVILA_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
diff --git a/target/linux/ixp4xx/patches-2.6.24/303-avila_gw23x7_phy_quirk.patch b/target/linux/ixp4xx/patches-2.6.24/303-avila_gw23x7_phy_quirk.patch
deleted file mode 100644
index 089cff9b90..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/303-avila_gw23x7_phy_quirk.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -247,6 +247,7 @@ static void __init avila_gw2345_setup(vo
-
- static void __init avila_gw2347_setup(void)
- {
-+ avila_npeb_data.quirks |= IXP4XX_ETH_QUIRK_GW23X7;
- platform_device_register(&avila_npeb_device);
-
- avila_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-@@ -281,6 +282,7 @@ static void __init avila_gw2355_setup(vo
-
- static void __init avila_gw2357_setup(void)
- {
-+ avila_npeb_data.quirks |= IXP4XX_ETH_QUIRK_GW23X7;
- platform_device_register(&avila_npeb_device);
-
- avila_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-Index: linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.24.7/drivers/net/arm/ixp4xx_eth.c
-@@ -348,6 +348,14 @@ static void phy_reset(struct net_device
- return;
- }
-
-+ if (port->plat->quirks & IXP4XX_ETH_QUIRK_GW23X7) {
-+ mdio_write(dev, 1, 0x19,
-+ (mdio_read(dev, 1, 0x19) & 0xfffe) | 0x8000);
-+
-+ printk(KERN_DEBUG "%s: phy_id of the DP83848 changed to 0\n",
-+ dev->name);
-+ }
-+
- /* restart auto negotiation */
- bmcr = mdio_read(dev, phy_id, MII_BMCR);
- bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/platform.h
-@@ -115,6 +115,8 @@ struct eth_plat_info {
- u8 txreadyq;
- u8 hwaddr[6];
- u32 phy_mask;
-+ u32 quirks;
-+#define IXP4XX_ETH_QUIRK_GW23X7 0x00000001
- };
-
- /* Information about built-in HSS (synchronous serial) interfaces */
diff --git a/target/linux/ixp4xx/patches-2.6.24/400-dmabounce.patch b/target/linux/ixp4xx/patches-2.6.24/400-dmabounce.patch
deleted file mode 100644
index 8beb971fad..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/400-dmabounce.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-Index: linux-2.6.24.7/arch/arm/common/dmabounce.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/common/dmabounce.c
-+++ linux-2.6.24.7/arch/arm/common/dmabounce.c
-@@ -117,6 +117,10 @@ alloc_safe_buffer(struct dmabounce_devic
- } else if (size <= device_info->large.size) {
- pool = &device_info->large;
- } else {
-+#ifdef CONFIG_DMABOUNCE_DEBUG
-+ printk(KERN_INFO "A dma bounce buffer outside the pool size was requested. Requested size was 0x%08X\nThe calling code was :\n", size);
-+ dump_stack();
-+#endif
- pool = NULL;
- }
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -236,6 +236,11 @@ config DMABOUNCE
- default y
- depends on PCI
-
-+config DMABOUNCE_DEBUG
-+ bool "Enable DMABounce debuging"
-+ default n
-+ depends on DMABOUNCE
-+
- config IXP4XX_INDIRECT_PCI
- bool "Use indirect PCI memory access"
- depends on PCI
diff --git a/target/linux/ixp4xx/patches-2.6.24/401-avila_pci_dev.patch b/target/linux/ixp4xx/patches-2.6.24/401-avila_pci_dev.patch
deleted file mode 100644
index 726c22f270..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/401-avila_pci_dev.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/avila.h
-@@ -25,7 +25,7 @@
- /*
- * AVILA PCI IRQs
- */
--#define AVILA_PCI_MAX_DEV 4
-+#define AVILA_PCI_MAX_DEV 6
- #define LOFT_PCI_MAX_DEV 6
- #define AVILA_PCI_IRQ_LINES 4
-
diff --git a/target/linux/ixp4xx/patches-2.6.24/402-ixp4xx_ehci_backport.patch b/target/linux/ixp4xx/patches-2.6.24/402-ixp4xx_ehci_backport.patch
deleted file mode 100644
index f898c55d30..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/402-ixp4xx_ehci_backport.patch
+++ /dev/null
@@ -1,220 +0,0 @@
-Index: linux-2.6.24.7/drivers/usb/host/ehci.h
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/host/ehci.h
-+++ linux-2.6.24.7/drivers/usb/host/ehci.h
-@@ -730,6 +730,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u
- #define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
- #endif
-
-+#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
-+#define readl_be(addr) __raw_readl((__force unsigned *)addr)
-+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
-+#endif
-+
- static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
- __u32 __iomem * regs)
- {
-Index: linux-2.6.24.7/drivers/usb/host/ehci-hcd.c
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/host/ehci-hcd.c
-+++ linux-2.6.24.7/drivers/usb/host/ehci-hcd.c
-@@ -964,6 +964,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_ppc_soc_driver
- #endif
-
-+#ifdef CONFIG_ARCH_IXP4XX
-+#include "ehci-ixp4xx.c"
-+#define PLATFORM_DRIVER ixp4xx_ehci_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER)
- #error "missing bus glue for ehci-hcd"
-Index: linux-2.6.24.7/drivers/usb/host/ehci-ixp4xx.c
-===================================================================
---- /dev/null
-+++ linux-2.6.24.7/drivers/usb/host/ehci-ixp4xx.c
-@@ -0,0 +1,152 @@
-+/*
-+ * IXP4XX EHCI Host Controller Driver
-+ *
-+ * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
-+ *
-+ * Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
-+ *
-+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ */
-+
-+#include <linux/platform_device.h>
-+
-+static int ixp4xx_ehci_init(struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int retval = 0;
-+
-+ ehci->big_endian_desc = 1;
-+ ehci->big_endian_mmio = 1;
-+
-+ ehci->caps = hcd->regs + 0x100;
-+ ehci->regs = hcd->regs + 0x100
-+ + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+ ehci->is_tdi_rh_tt = 1;
-+ ehci_reset(ehci);
-+
-+ retval = ehci_init(hcd);
-+ if (retval)
-+ return retval;
-+
-+ ehci_port_power(ehci, 0);
-+
-+ return retval;
-+}
-+
-+static const struct hc_driver ixp4xx_ehci_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "IXP4XX EHCI Host Controller",
-+ .hcd_priv_size = sizeof(struct ehci_hcd),
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+ .reset = ixp4xx_ehci_init,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_shutdown,
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+ .get_frame_number = ehci_get_frame,
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+#if defined(CONFIG_PM)
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+#endif
-+};
-+
-+static int ixp4xx_ehci_probe(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd;
-+ const struct hc_driver *driver = &ixp4xx_ehci_hc_driver;
-+ struct resource *res;
-+ int irq;
-+ int retval;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev,
-+ "Found HC with no IRQ. Check %s setup!\n",
-+ pdev->dev.bus_id);
-+ return -ENODEV;
-+ }
-+ irq = res->start;
-+
-+ hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
-+ if (!hcd) {
-+ retval = -ENOMEM;
-+ goto fail_create_hcd;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev,
-+ "Found HC with no register addr. Check %s setup!\n",
-+ pdev->dev.bus_id);
-+ retval = -ENODEV;
-+ goto fail_request_resource;
-+ }
-+ hcd->rsrc_start = res->start;
-+ hcd->rsrc_len = res->end - res->start + 1;
-+
-+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
-+ driver->description)) {
-+ dev_dbg(&pdev->dev, "controller already in use\n");
-+ retval = -EBUSY;
-+ goto fail_request_resource;
-+ }
-+
-+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+ if (hcd->regs == NULL) {
-+ dev_dbg(&pdev->dev, "error mapping memory\n");
-+ retval = -EFAULT;
-+ goto fail_ioremap;
-+ }
-+
-+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
-+ if (retval)
-+ goto fail_add_hcd;
-+
-+ return retval;
-+
-+fail_add_hcd:
-+ iounmap(hcd->regs);
-+fail_ioremap:
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+fail_request_resource:
-+ usb_put_hcd(hcd);
-+fail_create_hcd:
-+ dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
-+ return retval;
-+}
-+
-+static int ixp4xx_ehci_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:ixp4xx-ehci");
-+
-+static struct platform_driver ixp4xx_ehci_driver = {
-+ .probe = ixp4xx_ehci_probe,
-+ .remove = ixp4xx_ehci_remove,
-+ .driver = {
-+ .name = "ixp4xx-ehci",
-+// .bus = &platform_bus_type
-+ },
-+};
-Index: linux-2.6.24.7/drivers/usb/host/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/host/Kconfig
-+++ linux-2.6.24.7/drivers/usb/host/Kconfig
-@@ -69,12 +69,12 @@ config USB_EHCI_TT_NEWSCHED
-
- config USB_EHCI_BIG_ENDIAN_MMIO
- bool
-- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX)
-+ depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX)
- default y
-
- config USB_EHCI_BIG_ENDIAN_DESC
- bool
-- depends on USB_EHCI_HCD && 440EPX
-+ depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
- default y
-
- config USB_EHCI_FSL
-Index: linux-2.6.24.7/drivers/usb/Kconfig
-===================================================================
---- linux-2.6.24.7.orig/drivers/usb/Kconfig
-+++ linux-2.6.24.7/drivers/usb/Kconfig
-@@ -49,6 +49,7 @@ config USB_ARCH_HAS_EHCI
- boolean
- default y if PPC_83xx
- default y if SOC_AU1200
-+ default y if ARCH_IXP4XX
- default PCI
-
- # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/target/linux/ixp4xx/patches-2.6.24/900-include_bitops_h_from_arch_io_h.patch b/target/linux/ixp4xx/patches-2.6.24/900-include_bitops_h_from_arch_io_h.patch
deleted file mode 100644
index 15e09aa7e9..0000000000
--- a/target/linux/ixp4xx/patches-2.6.24/900-include_bitops_h_from_arch_io_h.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.24.7/include/asm-arm/arch-ixp4xx/io.h
-===================================================================
---- linux-2.6.24.7.orig/include/asm-arm/arch-ixp4xx/io.h
-+++ linux-2.6.24.7/include/asm-arm/arch-ixp4xx/io.h
-@@ -13,6 +13,8 @@
- #ifndef __ASM_ARM_ARCH_IO_H
- #define __ASM_ARM_ARCH_IO_H
-
-+#include <linux/bitops.h>
-+
- #include <asm/hardware.h>
-
- #define IO_SPACE_LIMIT 0xffff0000
diff --git a/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch b/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch
deleted file mode 100644
index 5f27aa7999..0000000000
--- a/target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch
+++ /dev/null
@@ -1,551 +0,0 @@
-This patch adds support for the D-Link DSM-G600 Rev A.
-This is an ARM XScale IXP4xx system relatively similar to
-the NSLU2 and NAS-100D already supported by mainline. An
-important difference is Gigabit Ethernet support using
-the Via Velocity chipset.
-
-This patch is the combined work of Michael Westerhof and
-Alessandro Zummo, with contributions from Michael-Luke
-Jones. This version addresses review comments from rmk
-and Deepak Saxena.
-
-Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
-Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
-Signed-off-by: Michael Westerhof <mwester@dls.net>
-
----
- arch/arm/mach-ixp4xx/Kconfig | 9 +
- arch/arm/mach-ixp4xx/Makefile | 2
- arch/arm/mach-ixp4xx/dsmg600-pci.c | 74 +++++++++++++
- arch/arm/mach-ixp4xx/dsmg600-power.c | 130 ++++++++++++++++++++++++
- arch/arm/mach-ixp4xx/dsmg600-setup.c | 175 +++++++++++++++++++++++++++++++++
- include/asm-arm/arch-ixp4xx/dsmg600.h | 57 ++++++++++
- include/asm-arm/arch-ixp4xx/hardware.h | 1
- include/asm-arm/arch-ixp4xx/irqs.h | 10 +
- 8 files changed, 458 insertions(+)
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,15 @@ config MACH_NAS100D
- NAS 100d device. For more information on this platform,
- see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
-
-+config MACH_DSMG600
-+ bool
-+ prompt "D-Link DSM-G600 RevA"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support D-Link's
-+ DSM-G600 RevA device. For more information on this platform,
-+ see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
-+
- #
- # Avila and IXDP share the same source for now. Will change in future
- #
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -12,6 +12,7 @@ obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coy
- obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
- obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
-+obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
-
- obj-y += common.o
-
-@@ -22,5 +23,6 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
-+obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-pci.c
-@@ -0,0 +1,74 @@
-+/*
-+ * DSM-G600 board-level PCI initialization
-+ *
-+ * Copyright (C) 2006 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init dsmg600_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
-+ set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
-+ {
-+ { IRQ_DSMG600_PCI_INTE, -1, -1 },
-+ { IRQ_DSMG600_PCI_INTA, -1, -1 },
-+ { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
-+ { IRQ_DSMG600_PCI_INTF, -1, -1 },
-+ };
-+
-+ int irq = -1;
-+
-+ if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
-+ irq = pci_irq_table[slot-1][pin-1];
-+
-+ return irq;
-+}
-+
-+struct hw_pci __initdata dsmg600_pci = {
-+ .nr_controllers = 1,
-+ .preinit = dsmg600_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = dsmg600_map_irq,
-+};
-+
-+int __init dsmg600_pci_init(void)
-+{
-+ if (machine_is_dsmg600())
-+ pci_common_init(&dsmg600_pci);
-+
-+ return 0;
-+}
-+
-+subsys_initcall(dsmg600_pci_init);
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-power.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-power.c
-@@ -0,0 +1,130 @@
-+/*
-+ * arch/arm/mach-ixp4xx/dsmg600-power.c
-+ *
-+ * DSM-G600 Power/Reset driver
-+ * Author: Michael Westerhof <mwester@dls.net>
-+ *
-+ * Based on nslu2-power.c
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * which was based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/jiffies.h>
-+#include <linux/timer.h>
-+
-+#include <asm/mach-types.h>
-+
-+extern void ctrl_alt_del(void);
-+
-+/* This is used to make sure the power-button pusher is serious. The button
-+ * must be held until the value of this counter reaches zero.
-+ */
-+static volatile int power_button_countdown;
-+
-+/* Must hold the button down for at least this many counts to be processed */
-+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-+
-+static void dsmg600_power_handler(unsigned long data);
-+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
-+
-+static void dsmg600_power_handler(unsigned long data)
-+{
-+ /* This routine is called twice per second to check the
-+ * state of the power button.
-+ */
-+
-+ if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
-+
-+ /* IO Pin is 1 (button pushed) */
-+ if (power_button_countdown > 0) {
-+ power_button_countdown--;
-+ }
-+
-+ } else {
-+
-+ /* Done on button release, to allow for auto-power-on mods. */
-+ if (power_button_countdown == 0) {
-+ /* Signal init to do the ctrlaltdel action, this will bypass
-+ * init if it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ /* Change the state of the power LED to "blink" */
-+ gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-+ } else {
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+ }
-+ }
-+
-+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-+}
-+
-+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly. */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init dsmg600_power_init(void)
-+{
-+ if (!(machine_is_dsmg600()))
-+ return 0;
-+
-+ if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
-+ IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
-+ NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ DSMG600_RB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ /* The power button on the D-Link DSM-G600 is on GPIO 15, but
-+ * it cannot handle interrupts on that GPIO line. So we'll
-+ * have to poll it with a kernel timer.
-+ */
-+
-+ /* Make sure that the power button GPIO is set up as an input */
-+ gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Set the initial value for the power button IRQ handler */
-+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-+
-+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-+
-+ return 0;
-+}
-+
-+static void __exit dsmg600_power_exit(void)
-+{
-+ if (!(machine_is_dsmg600()))
-+ return;
-+
-+ del_timer_sync(&dsmg600_power_timer);
-+
-+ free_irq(DSMG600_RB_IRQ, NULL);
-+}
-+
-+module_init(dsmg600_power_init);
-+module_exit(dsmg600_power_exit);
-+
-+MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
-+MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -0,0 +1,175 @@
-+/*
-+ * DSM-G600 board-setup
-+ *
-+ * Copyright (C) 2006 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data dsmg600_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource dsmg600_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device dsmg600_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &dsmg600_flash_data,
-+ .num_resources = 1,
-+ .resource = &dsmg600_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = {
-+ .sda_pin = DSMG600_SDA_PIN,
-+ .scl_pin = DSMG600_SCL_PIN,
-+};
-+
-+static struct platform_device dsmg600_i2c_controller = {
-+ .name = "IXP4XX-I2C",
-+ .id = 0,
-+ .dev.platform_data = &dsmg600_i2c_gpio_pins,
-+};
-+
-+#ifdef CONFIG_LEDS_CLASS
-+static struct resource dsmg600_led_resources[] = {
-+ {
-+ .name = "power",
-+ .start = DSMG600_LED_PWR_GPIO,
-+ .end = DSMG600_LED_PWR_GPIO,
-+ .flags = IXP4XX_GPIO_HIGH,
-+ },
-+ {
-+ .name = "wlan",
-+ .start = DSMG600_LED_WLAN_GPIO,
-+ .end = DSMG600_LED_WLAN_GPIO,
-+ .flags = IXP4XX_GPIO_LOW,
-+ },
-+};
-+
-+static struct platform_device dsmg600_leds = {
-+ .name = "IXP4XX-GPIO-LED",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(dsmg600_led_resources),
-+ .resource = dsmg600_led_resources,
-+};
-+#endif
-+
-+static struct resource dsmg600_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port dsmg600_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device dsmg600_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = dsmg600_uart_data,
-+ .num_resources = ARRAY_SIZE(dsmg600_uart_resources),
-+ .resource = dsmg600_uart_resources,
-+};
-+
-+static struct platform_device *dsmg600_devices[] __initdata = {
-+ &dsmg600_i2c_controller,
-+ &dsmg600_flash,
-+};
-+
-+static void dsmg600_power_off(void)
-+{
-+ /* enable the pwr cntl gpio */
-+ gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+ /* poweroff */
-+ gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+static void __init dsmg600_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ /* Make sure that GPIO14 and GPIO15 are not used as clocks */
-+ *IXP4XX_GPIO_GPCLKR = 0;
-+
-+ dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ dsmg600_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ pm_power_off = dsmg600_power_off;
-+
-+ /* The UART is required on the DSM-G600 (Redboot cannot use the
-+ * NIC) -- do it here so that it does *not* get removed if
-+ * platform_add_devices fails!
-+ */
-+ (void)platform_device_register(&dsmg600_uart);
-+
-+ platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
-+
-+#ifdef CONFIG_LEDS_CLASS
-+ /* We don't care whether or not this works. */
-+ (void)platform_device_register(&dsmg600_leds);
-+#endif
-+}
-+
-+static void __init dsmg600_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ /* The xtal on this machine is non-standard. */
-+ ixp4xx_timer_freq = DSMG600_FREQ;
-+}
-+
-+MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+ .boot_params = 0x00000100,
-+ .fixup = dsmg600_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .init_machine = dsmg600_init,
-+MACHINE_END
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/dsmg600.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/dsmg600.h
-@@ -0,0 +1,57 @@
-+/*
-+ * DSM-G600 platform specific definitions
-+ *
-+ * Copyright (C) 2006 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on ixdp425.h:
-+ * Copyright 2004 (C) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define DSMG600_SDA_PIN 5
-+#define DSMG600_SCL_PIN 4
-+
-+/*
-+ * DSMG600 PCI IRQs
-+ */
-+#define DSMG600_PCI_MAX_DEV 4
-+#define DSMG600_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define DSMG600_PCI_INTA_PIN 11
-+#define DSMG600_PCI_INTB_PIN 10
-+#define DSMG600_PCI_INTC_PIN 9
-+#define DSMG600_PCI_INTD_PIN 8
-+#define DSMG600_PCI_INTE_PIN 7
-+#define DSMG600_PCI_INTF_PIN 6
-+
-+/* DSM-G600 Timer Setting */
-+#define DSMG600_FREQ 66000000
-+
-+/* Buttons */
-+
-+#define DSMG600_PB_GPIO 15 /* power button */
-+#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO)
-+
-+#define DSMG600_RB_GPIO 3 /* reset button */
-+
-+#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3
-+
-+#define DSMG600_PO_GPIO 2 /* power off */
-+
-+/* LEDs */
-+
-+#define DSMG600_LED_PWR_GPIO 0
-+#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO)
-+
-+#define DSMG600_LED_WLAN_GPIO 14
-+#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO)
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -47,5 +47,6 @@ extern unsigned int processor_id;
- #include "prpmc1100.h"
- #include "nslu2.h"
- #include "nas100d.h"
-+#include "dsmg600.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/irqs.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/irqs.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/irqs.h
-@@ -118,4 +118,14 @@
- #define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8
- #define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7
-
-+/*
-+ * D-Link DSM-G600 RevA board IRQs
-+ */
-+#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11
-+#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10
-+#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9
-+#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8
-+#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
-+#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
-+
- #endif
diff --git a/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch b/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch
deleted file mode 100644
index 297571283d..0000000000
--- a/target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-This patch is required as the frequency fixup in nslu2_init does not
-run sufficiently early in the boot sequence to take effect. In
-addition the dsmg600 setup code behaviour has been improved such
-that a 'fixup' routine is avoided.
-
-Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -22,6 +22,7 @@
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-+#include <asm/mach/time.h>
-
- static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
-@@ -157,10 +158,21 @@ static void nslu2_power_off(void)
- gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
--static void __init nslu2_init(void)
-+static void __init nslu2_timer_init(void)
- {
-- ixp4xx_timer_freq = NSLU2_FREQ;
-+ /* The xtal on this machine is non-standard. */
-+ ixp4xx_timer_freq = NSLU2_FREQ;
-+
-+ /* Call standard timer_init function. */
-+ ixp4xx_timer_init();
-+}
-
-+static struct sys_timer nslu2_timer = {
-+ .init = nslu2_timer_init,
-+};
-+
-+static void __init nslu2_init(void)
-+{
- ixp4xx_sys_init();
-
- nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -185,6 +197,6 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
- .boot_params = 0x00000100,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
-- .timer = &ixp4xx_timer,
-+ .timer = &nslu2_timer,
- .init_machine = nslu2_init,
- MACHINE_END
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/common.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/common.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/common.c
-@@ -269,7 +269,7 @@ static struct irqaction ixp4xx_timer_irq
- .handler = ixp4xx_timer_interrupt,
- };
-
--static void __init ixp4xx_timer_init(void)
-+void __init ixp4xx_timer_init(void)
- {
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/platform.h
-@@ -113,6 +113,7 @@ extern unsigned long ixp4xx_timer_freq;
- extern void ixp4xx_map_io(void);
- extern void ixp4xx_init_irq(void);
- extern void ixp4xx_sys_init(void);
-+extern void ixp4xx_timer_init(void);
- extern struct sys_timer ixp4xx_timer;
- extern void ixp4xx_pci_preinit(void);
- struct pci_sys_data;
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -18,6 +18,7 @@
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-+#include <asm/mach/time.h>
-
- static struct flash_platform_data dsmg600_flash_data = {
- .map_name = "cfi_probe",
-@@ -128,6 +129,19 @@ static void dsmg600_power_off(void)
- gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
-+static void __init dsmg600_timer_init(void)
-+{
-+ /* The xtal on this machine is non-standard. */
-+ ixp4xx_timer_freq = DSMG600_FREQ;
-+
-+ /* Call standard timer_init function. */
-+ ixp4xx_timer_init();
-+}
-+
-+static struct sys_timer dsmg600_timer = {
-+ .init = dsmg600_timer_init,
-+};
-+
- static void __init dsmg600_init(void)
- {
- ixp4xx_sys_init();
-@@ -155,21 +169,13 @@ static void __init dsmg600_init(void)
- #endif
- }
-
--static void __init dsmg600_fixup(struct machine_desc *desc,
-- struct tag *tags, char **cmdline, struct meminfo *mi)
--{
-- /* The xtal on this machine is non-standard. */
-- ixp4xx_timer_freq = DSMG600_FREQ;
--}
--
- MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
- /* Maintainer: www.nslu2-linux.org */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
- .boot_params = 0x00000100,
-- .fixup = dsmg600_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
-- .timer = &ixp4xx_timer,
-+ .timer = &dsmg600_timer,
- .init_machine = dsmg600_init,
- MACHINE_END
diff --git a/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch b/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch
deleted file mode 100644
index 13ae639826..0000000000
--- a/target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-This trivial patch updates the nslu2 and nas-100d headers to
-remove pointless GPIO defines, and updates nslu2-setup.c
-accordingly. In addition minor style cleanups to some comments
-are included.
-
-Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -50,26 +50,26 @@ static struct ixp4xx_i2c_pins nslu2_i2c_
- static struct resource nslu2_led_resources[] = {
- {
- .name = "ready", /* green led */
-- .start = NSLU2_LED_GRN,
-- .end = NSLU2_LED_GRN,
-+ .start = NSLU2_LED_GRN_GPIO,
-+ .end = NSLU2_LED_GRN_GPIO,
- .flags = IXP4XX_GPIO_HIGH,
- },
- {
- .name = "status", /* red led */
-- .start = NSLU2_LED_RED,
-- .end = NSLU2_LED_RED,
-+ .start = NSLU2_LED_RED_GPIO,
-+ .end = NSLU2_LED_RED_GPIO,
- .flags = IXP4XX_GPIO_HIGH,
- },
- {
- .name = "disk-1",
-- .start = NSLU2_LED_DISK1,
-- .end = NSLU2_LED_DISK1,
-+ .start = NSLU2_LED_DISK1_GPIO,
-+ .end = NSLU2_LED_DISK1_GPIO,
- .flags = IXP4XX_GPIO_LOW,
- },
- {
- .name = "disk-2",
-- .start = NSLU2_LED_DISK2,
-- .end = NSLU2_LED_DISK2,
-+ .start = NSLU2_LED_DISK2_GPIO,
-+ .end = NSLU2_LED_DISK2_GPIO,
- .flags = IXP4XX_GPIO_LOW,
- },
- };
-@@ -181,7 +181,8 @@ static void __init nslu2_init(void)
-
- pm_power_off = nslu2_power_off;
-
-- /* This is only useful on a modified machine, but it is valuable
-+ /*
-+ * This is only useful on a modified machine, but it is valuable
- * to have it first in order to see debug messages, and so that
- * it does *not* get removed if platform_add_devices fails!
- */
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/nslu2.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/nslu2.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/nslu2.h
-@@ -9,7 +9,7 @@
- * based on ixdp425.h:
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
-- * This file is licensed under the terms of the GNU General Public
-+ * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-@@ -34,36 +34,14 @@
- #define NSLU2_PCI_INTC_PIN 9
- #define NSLU2_PCI_INTD_PIN 8
-
--
- /* NSLU2 Timer */
- #define NSLU2_FREQ 66000000
--#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
--#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
--
--/* GPIO */
--
--#define NSLU2_GPIO0 0
--#define NSLU2_GPIO1 1
--#define NSLU2_GPIO2 2
--#define NSLU2_GPIO3 3
--#define NSLU2_GPIO4 4
--#define NSLU2_GPIO5 5
--#define NSLU2_GPIO6 6
--#define NSLU2_GPIO7 7
--#define NSLU2_GPIO8 8
--#define NSLU2_GPIO9 9
--#define NSLU2_GPIO10 10
--#define NSLU2_GPIO11 11
--#define NSLU2_GPIO12 12
--#define NSLU2_GPIO13 13
--#define NSLU2_GPIO14 14
--#define NSLU2_GPIO15 15
-
- /* Buttons */
-
--#define NSLU2_PB_GPIO NSLU2_GPIO5
--#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */
--#define NSLU2_RB_GPIO NSLU2_GPIO12
-+#define NSLU2_PB_GPIO 5
-+#define NSLU2_PO_GPIO 8 /* power off */
-+#define NSLU2_RB_GPIO 12
-
- #define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
- #define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
-@@ -79,16 +57,16 @@
-
- /* LEDs */
-
--#define NSLU2_LED_RED NSLU2_GPIO0
--#define NSLU2_LED_GRN NSLU2_GPIO1
-+#define NSLU2_LED_RED_GPIO 0
-+#define NSLU2_LED_GRN_GPIO 1
-
--#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
--#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
-+#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO)
-+#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO)
-
--#define NSLU2_LED_DISK1 NSLU2_GPIO3
--#define NSLU2_LED_DISK2 NSLU2_GPIO2
-+#define NSLU2_LED_DISK1_GPIO 3
-+#define NSLU2_LED_DISK2_GPIO 2
-
--#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
--#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
-+#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO)
-+#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO)
-
-
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/nas100d.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/nas100d.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/nas100d.h
-@@ -10,7 +10,7 @@
- * based on ixdp425.h:
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
-- * This file is licensed under the terms of the GNU General Public
-+ * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-@@ -36,31 +36,11 @@
- #define NAS100D_PCI_INTD_PIN 8
- #define NAS100D_PCI_INTE_PIN 7
-
--/* GPIO */
--
--#define NAS100D_GPIO0 0
--#define NAS100D_GPIO1 1
--#define NAS100D_GPIO2 2
--#define NAS100D_GPIO3 3
--#define NAS100D_GPIO4 4
--#define NAS100D_GPIO5 5
--#define NAS100D_GPIO6 6
--#define NAS100D_GPIO7 7
--#define NAS100D_GPIO8 8
--#define NAS100D_GPIO9 9
--#define NAS100D_GPIO10 10
--#define NAS100D_GPIO11 11
--#define NAS100D_GPIO12 12
--#define NAS100D_GPIO13 13
--#define NAS100D_GPIO14 14
--#define NAS100D_GPIO15 15
--
--
- /* Buttons */
-
--#define NAS100D_PB_GPIO NAS100D_GPIO14
--#define NAS100D_RB_GPIO NAS100D_GPIO4
--#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */
-+#define NAS100D_PB_GPIO 14
-+#define NAS100D_RB_GPIO 4
-+#define NAS100D_PO_GPIO 12 /* power off */
-
- #define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14
- #define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -155,7 +155,8 @@ static void __init nas100d_init(void)
-
- pm_power_off = nas100d_power_off;
-
-- /* This is only useful on a modified machine, but it is valuable
-+ /*
-+ * This is only useful on a modified machine, but it is valuable
- * to have it first in order to see debug messages, and so that
- * it does *not* get removed if platform_add_devices fails!
- */
diff --git a/target/linux/ixp4xx/patches/100-npe_driver.patch b/target/linux/ixp4xx/patches/100-npe_driver.patch
deleted file mode 100644
index 987e349827..0000000000
--- a/target/linux/ixp4xx/patches/100-npe_driver.patch
+++ /dev/null
@@ -1,4878 +0,0 @@
-Index: linux-2.6.21.7/Documentation/networking/ixp4xx/IxNpeMicrocode.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/Documentation/networking/ixp4xx/IxNpeMicrocode.h
-@@ -0,0 +1,143 @@
-+/*
-+ * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ *
-+ *
-+ * compile with
-+ *
-+ * gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode
-+ *
-+ * Executing the resulting binary on your build-host creates the
-+ * "NPE-[ABC].xxxxxxxx" files containing the selected microcode
-+ *
-+ * fetch the IxNpeMicrocode.c from the Intel Access Library.
-+ * It will include this header.
-+ *
-+ * select Images for every NPE from the following
-+ * (used C++ comments for easy uncommenting ....)
-+ */
-+
-+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_TSLOT_SWITCH
-+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
-+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL
-+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT
-+// #define IX_NPEDL_NPEIMAGE_NPEA_DMA
-+// #define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT
-+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT
-+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT
-+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0
-+// #define IX_NPEDL_NPEIMAGE_NPEA_WEP
-+
-+
-+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
-+//#define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEB_DMA
-+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
-+ #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL
-+
-+
-+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
-+// #define IX_NPEDL_NPEIMAGE_NPEC_DMA
-+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_SPAN
-+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_FIREWALL
-+ #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH
-+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_ETH_LEARN_FILTER_SPAN_FIREWALL
-+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
-+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL
-+
-+
-+#include <stdio.h>
-+#include <unistd.h>
-+#include <stdlib.h>
-+#include <netinet/in.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+#include <fcntl.h>
-+#include <errno.h>
-+#include <endian.h>
-+#include <byteswap.h>
-+#include <string.h>
-+
-+#if __BYTE_ORDER == __LITTLE_ENDIAN
-+#define to_le32(x) (x)
-+#define to_be32(x) bswap_32(x)
-+#else
-+#define to_be32(x) (x)
-+#define to_le32(x) bswap_32(x)
-+#endif
-+
-+struct dl_image {
-+ unsigned magic;
-+ unsigned id;
-+ unsigned size;
-+ unsigned data[0];
-+};
-+
-+const unsigned IxNpeMicrocode_array[];
-+
-+int main(int argc, char *argv[])
-+{
-+ struct dl_image *image = (struct dl_image *)IxNpeMicrocode_array;
-+ int imgsiz, i, fd, cnt;
-+ const unsigned *arrayptr = IxNpeMicrocode_array;
-+ const char *names[] = { "IXP425", "IXP465", "unknown" };
-+ int bigendian = 1;
-+
-+ if (argc > 1) {
-+ if (!strcmp(argv[1], "-le"))
-+ bigendian = 0;
-+ else if (!strcmp(argv[1], "-be"))
-+ bigendian = 1;
-+ else {
-+ printf("Usage: %s <-le|-be>\n", argv[0]);
-+ return EXIT_FAILURE;
-+ }
-+ }
-+
-+ for (image = (struct dl_image *)arrayptr, cnt=0;
-+ (image->id != 0xfeedf00d) && (image->magic == 0xfeedf00d);
-+ image = (struct dl_image *)(arrayptr), cnt++)
-+ {
-+ unsigned char field[4];
-+ imgsiz = image->size + 3;
-+ *(unsigned*)field = to_be32(image->id);
-+ char filename[40], slnk[10];
-+
-+ sprintf(filename, "NPE-%c.%08x", (field[0] & 0xf) + 'A',
-+ image->id);
-+ sprintf(slnk, "NPE-%c", (field[0] & 0xf) + 'A');
-+ printf("Writing image: %s.NPE_%c Func: %2x Rev: %02x.%02x "
-+ "Size: %5d to: '%s'\n",
-+ names[field[0] >> 4], (field[0] & 0xf) + 'A',
-+ field[1], field[2], field[3], imgsiz*4, filename);
-+ fd = open(filename, O_CREAT | O_RDWR | O_TRUNC, 0644);
-+ if (fd >= 0) {
-+ for (i=0; i<imgsiz; i++) {
-+ *(unsigned*)field = bigendian ?
-+ to_be32(arrayptr[i]) :
-+ to_le32(arrayptr[i]);
-+ write(fd, field, sizeof(field));
-+ }
-+ close(fd);
-+ unlink(slnk);
-+ symlink(filename, slnk);
-+ } else {
-+ perror(filename);
-+ }
-+ arrayptr += imgsiz;
-+ }
-+ close(fd);
-+ return 0;
-+}
-Index: linux-2.6.21.7/Documentation/networking/ixp4xx/README
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/Documentation/networking/ixp4xx/README
-@@ -0,0 +1,62 @@
-+Informations about the Networking Driver using the IXP4XX CPU internal NPEs
-+and Queue manager.
-+
-+If this driver is used, the IAL (Intel Access Library) must not be loaded.
-+However, the IAL may be loaded, if this Modules are unloaded:
-+ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko
-+
-+This also means that HW crypto accelleration does NOT work when using this
-+driver, unless I have finished my crypto driver for NPE-C
-+
-+
-+Adoption to your custom board:
-+------------------------------
-+use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template:
-+
-+in "static struct mac_plat_info" adopt the entry "phy_id" to your needs
-+(Ask your hardware designer about the PHY id)
-+
-+The order of "&mac0" and "&mac1" in the "struct platform_device"
-+determines which of them becomes eth0 and eth1
-+
-+
-+The Microcode:
-+---------------
-+Solution 1)
-+ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure
-+ IXP4XX_NPE as module.
-+ The default hotplug script will load the Firmware from
-+ /usr/lib/hotplug/firmware/NPE-[ABC]
-+ see Documentation/firmware_class/hotplug-script
-+
-+ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware"
-+ to avoid unnessecary calls:
-+ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit
-+
-+Solution 2)
-+ create a char-dev: "mknod /dev/misc/npe c 10 184"
-+ cat the Microcode into it:
-+ cat /usr/lib/hotplug/firmware/NPE-* > /dev/misc/npe
-+ This also works if the driver is linked to the kernel
-+
-+ Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C)
-+ is perfectly ok and works.
-+
-+ The state of the NPEs can be seen and changed at:
-+ /sys/bus/platform/devices/ixp4xx_npe.X/state
-+
-+
-+Obtaining the Microcode:
-+------------------------
-+1) IxNpeMicrocode.h in this directory:
-+ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel
-+ It unpacks the Microcode IxNpeMicrocode.c
-+ Read the Licence !
-+ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host.
-+ The resulting images can be moved to "/usr/lib/hotplug/firmware"
-+
-+2) mc_grab.c in this directory:
-+ Compile and execute it either on the host or on the target
-+ to grab the microcode from a binary image like the RedBoot bootloader.
-+
-+
-Index: linux-2.6.21.7/Documentation/networking/ixp4xx/mc_grab.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/Documentation/networking/ixp4xx/mc_grab.c
-@@ -0,0 +1,97 @@
-+/*
-+ * mc_grab.c - grabs IXP4XX microcode from a binary datastream
-+ * e.g. The redboot bootloader....
-+ *
-+ * usage: mc_grab 1010200 2010200 < /dev/mtd/0 > /dev/misc/npe
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+
-+#include <stdlib.h>
-+#include <stdio.h>
-+#include <unistd.h>
-+#include <netinet/in.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+#include <fcntl.h>
-+#include <errno.h>
-+#include <string.h>
-+
-+#define MAX_IMG 6
-+
-+static void print_mc_info(unsigned id, int siz)
-+{
-+ unsigned char buf[sizeof(unsigned)];
-+ *(unsigned*)buf = id;
-+ unsigned idx;
-+ const char *names[] = { "IXP425", "IXP465", "unknown" };
-+
-+ idx = (buf[0] >> 4) < 2 ? (buf[0] >> 4) : 2;
-+
-+ fprintf(stderr, "Device: %s:NPE_%c Func: %2x Rev: %02x.%02x "
-+ "Size: %5d bytes ID:%08x\n", names[idx], (buf[0] & 0xf)+'A',
-+ buf[1], buf[2], buf[3], siz*4, ntohl(id));
-+}
-+
-+int main(int argc, char *argv[])
-+{
-+ int i,j;
-+ unsigned char buf[sizeof(unsigned)];
-+ unsigned magic = htonl(0xfeedf00d);
-+ unsigned id, my_ids[MAX_IMG+1], siz, sizbe;
-+ int ret=1, verbose=0;
-+
-+ for (i=0, j=0; i<argc-1 && j<MAX_IMG; i++) {
-+ if (!strcmp(argv[i+1], "-v"))
-+ verbose = 1;
-+ else
-+ my_ids[j++] = htonl(strtoul(argv[i+1], NULL, 16));
-+ }
-+ my_ids[j] = 0;
-+ if (my_ids[0] == 0 && !verbose) {
-+ fprintf(stderr, "Usage: %s <-v> [ID1] [ID2] [IDn]\n", argv[0]);
-+ return 1;
-+ }
-+
-+ while ((ret=read(0, buf, sizeof(unsigned))) == sizeof(unsigned)) {
-+ if (*(unsigned*)buf != magic)
-+ continue;
-+ if ((ret=read(0, buf, sizeof(unsigned))) != sizeof(unsigned) )
-+ break;
-+ id = *(unsigned*)buf;
-+
-+ if (read(0, buf, sizeof(siz)) != sizeof(siz) )
-+ break;
-+ sizbe = *(unsigned*)buf;
-+ siz = ntohl(sizbe);
-+
-+ if (verbose)
-+ print_mc_info(id, siz);
-+
-+ for(i=0; my_ids[i]; i++)
-+ if (id == my_ids[i])
-+ break;
-+ if (!my_ids[i])
-+ continue;
-+
-+ if (!verbose)
-+ print_mc_info(id, siz);
-+
-+ write(1, &magic, sizeof(magic));
-+ write(1, &id, sizeof(id));
-+ write(1, &sizbe, sizeof(sizbe));
-+ for (i=0; i<siz; i++) {
-+ if (read(0, buf, sizeof(unsigned)) != sizeof(unsigned))
-+ break;
-+ write(1, buf, sizeof(unsigned));
-+ }
-+ if (i != siz)
-+ break;
-+ }
-+ if (ret)
-+ fprintf(stderr, "Error reading Microcode\n");
-+ return ret;
-+}
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/common.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/common.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/common.c
-@@ -357,6 +357,90 @@ static struct platform_device *ixp46x_de
- &ixp46x_i2c_controller
- };
-
-+static struct npe_plat_data npea = {
-+ .name = "NPE-A",
-+ .data_size = 0x800,
-+ .inst_size = 0x1000,
-+ .id = 0,
-+};
-+
-+static struct npe_plat_data npeb = {
-+ .name = "NPE-B",
-+ .data_size = 0x800,
-+ .inst_size = 0x800,
-+ .id = 1,
-+};
-+
-+static struct npe_plat_data npec = {
-+ .name = "NPE-C",
-+ .data_size = 0x800,
-+ .inst_size = 0x800,
-+ .id = 2,
-+};
-+
-+static struct resource res_npea = {
-+ .start = IXP4XX_NPEA_BASE_PHYS,
-+ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_npeb = {
-+ .start = IXP4XX_NPEB_BASE_PHYS,
-+ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_npec = {
-+ .start = IXP4XX_NPEC_BASE_PHYS,
-+ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device dev_npea = {
-+ .name = "ixp4xx_npe",
-+ .id = 0,
-+ .dev.platform_data = &npea,
-+ .num_resources = 1,
-+ .resource = &res_npea,
-+};
-+
-+static struct platform_device dev_npeb = {
-+ .name = "ixp4xx_npe",
-+ .id = 1,
-+ .dev.platform_data = &npeb,
-+ .num_resources = 1,
-+ .resource = &res_npeb,
-+};
-+
-+static struct platform_device dev_npec = {
-+ .name = "ixp4xx_npe",
-+ .id = 2,
-+ .dev.platform_data = &npec,
-+ .num_resources = 1,
-+ .resource = &res_npec,
-+};
-+
-+/* QMGR */
-+static struct resource res_qmgr[] = {
-+{
-+ .start = IXP4XX_QMGR_BASE_PHYS,
-+ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+}, {
-+ .start = IRQ_IXP4XX_QM1,
-+ .flags = IORESOURCE_IRQ,
-+} };
-+
-+static struct platform_device qmgr = {
-+ .name = "ixp4xx_qmgr",
-+ .id = 0,
-+ .dev = {
-+ .coherent_dma_mask = DMA_32BIT_MASK,
-+ },
-+ .num_resources = ARRAY_SIZE(res_qmgr),
-+ .resource = res_qmgr,
-+};
-+
- unsigned long ixp4xx_exp_bus_size;
- EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-@@ -378,8 +462,19 @@ void __init ixp4xx_sys_init(void)
- break;
- }
- }
-+ npeb.inst_size = 0x1000;
-+ npec.inst_size = 0x1000;
- }
-
-+ platform_device_register(&qmgr);
-+
-+ if (ix_fuse() & IX_FUSE_NPEA)
-+ platform_device_register(&dev_npea);
-+ if (ix_fuse() & IX_FUSE_NPEB)
-+ platform_device_register(&dev_npeb);
-+ if (ix_fuse() & IX_FUSE_NPEC)
-+ platform_device_register(&dev_npec);
-+
- printk("IXP4xx: Using %luMiB expansion bus window size\n",
- ixp4xx_exp_bus_size >> 20);
- }
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/ixdp425-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -101,10 +101,59 @@ static struct platform_device ixdp425_ua
- .resource = ixdp425_uart_resources
- };
-
-+/* MACs */
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 0,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 1,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+ .rxdoneq_id = 5,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
- static struct platform_device *ixdp425_devices[] __initdata = {
- &ixdp425_i2c_controller,
- &ixdp425_flash,
-- &ixdp425_uart
-+ &ixdp425_uart,
-+ &mac0,
-+ &mac1,
- };
-
- static void __init ixdp425_init(void)
-Index: linux-2.6.21.7/drivers/net/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/Kconfig
-+++ linux-2.6.21.7/drivers/net/Kconfig
-@@ -324,6 +324,8 @@ config MACB
-
- source "drivers/net/arm/Kconfig"
-
-+source "drivers/net/ixp4xx/Kconfig"
-+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on NET_ETHERNET && PPC_PMAC && PPC32
-Index: linux-2.6.21.7/drivers/net/Makefile
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/Makefile
-+++ linux-2.6.21.7/drivers/net/Makefile
-@@ -213,6 +213,7 @@ obj-$(CONFIG_HAMRADIO) += hamradio/
- obj-$(CONFIG_IRDA) += irda/
- obj-$(CONFIG_ETRAX_ETHERNET) += cris/
- obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/
-
- obj-$(CONFIG_NETCONSOLE) += netconsole.o
-
-Index: linux-2.6.21.7/drivers/net/ixp4xx/Kconfig
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/Kconfig
-@@ -0,0 +1,48 @@
-+config IXP4XX_QMGR
-+ tristate "IXP4xx Queue Manager support"
-+ depends on ARCH_IXP4XX
-+ depends on NET_ETHERNET
-+ help
-+ The IXP4XX Queue manager is a configurable hardware ringbuffer.
-+ It is used by the NPEs to exchange data from and to the CPU.
-+ You can either use this OR the Intel Access Library (IAL)
-+
-+config IXP4XX_NPE
-+ tristate "IXP4xx NPE support"
-+ depends on ARCH_IXP4XX
-+ depends on NET_ETHERNET
-+ help
-+ The IXP4XX NPE driver supports the 3 CPU co-processors called
-+ "Network Processing Engines" (NPE). It adds support fo downloading
-+ the Microcode (firmware) via Hotplug or character-special-device.
-+ More about this at: Documentation/networking/ixp4xx/README.
-+ You can either use this OR the Intel Access Library (IAL)
-+
-+config IXP4XX_FW_LOAD
-+ bool "Use Firmware hotplug for Microcode download"
-+ depends on IXP4XX_NPE
-+ select HOTPLUG
-+ select FW_LOADER
-+ help
-+ The default hotplug script will load the Firmware from
-+ /usr/lib/hotplug/firmware/NPE-[ABC]
-+ see Documentation/firmware_class/hotplug-script
-+
-+config IXP4XX_MAC
-+ tristate "IXP4xx MAC support"
-+ depends on IXP4XX_NPE
-+ depends on IXP4XX_QMGR
-+ depends on NET_ETHERNET
-+ select MII
-+ help
-+ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs.
-+ There are 2 on ixp425 and up to 5 on ixdp465.
-+ You can either use this OR the Intel Access Library (IAL)
-+
-+config IXP4XX_CRYPTO
-+ tristate "IXP4xx crypto support"
-+ depends on IXP4XX_NPE
-+ depends on IXP4XX_QMGR
-+ help
-+ This driver is a generic NPE-crypto access layer.
-+ You need additional code in OCF for example.
-Index: linux-2.6.21.7/drivers/net/ixp4xx/Makefile
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/Makefile
-@@ -0,0 +1,7 @@
-+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
-+obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
-+obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o
-+
-+ixp4xx_npe-objs := ucode_dl.o npe_mh.o npe.o
-+ixp4xx_mac-objs := mac_driver.o phy.o
-Index: linux-2.6.21.7/drivers/net/ixp4xx/ixp4xx_crypto.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/ixp4xx_crypto.c
-@@ -0,0 +1,851 @@
-+/*
-+ * ixp4xx_crypto.c - interface to the HW crypto
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/ixp_qmgr.h>
-+#include <linux/ixp_npe.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/kernel.h>
-+#include <linux/ixp_crypto.h>
-+
-+#define SEND_QID 29
-+#define RECV_QID 30
-+
-+#define NPE_ID 2 /* NPE C */
-+
-+#define QUEUE_SIZE 64
-+#define MY_VERSION "0.0.1"
-+
-+/* local head for all sa_ctx */
-+static struct ix_sa_master sa_master;
-+
-+static const struct ix_hash_algo _hash_algos[] = {
-+{
-+ .name = "MD5",
-+ .cfgword = 0xAA010004,
-+ .digest_len = 16,
-+ .icv = "\x01\x23\x45\x67\x89\xAB\xCD\xEF"
-+ "\xFE\xDC\xBA\x98\x76\x54\x32\x10",
-+ .type = HASH_TYPE_MD5,
-+},{
-+ .name = "SHA1",
-+ .cfgword = 0x00000005,
-+ .digest_len = 20,
-+ .icv = "\x67\x45\x23\x01\xEF\xCD\xAB\x89\x98\xBA"
-+ "\xDC\xFE\x10\x32\x54\x76\xC3\xD2\xE1\xF0",
-+ .type = HASH_TYPE_SHA1,
-+#if 0
-+},{
-+ .name = "CBC MAC",
-+ .digest_len = 64,
-+ .aad_len = 48,
-+ .type = HASH_TYPE_CBCMAC,
-+#endif
-+} };
-+
-+static const struct ix_cipher_algo _cipher_algos[] = {
-+{
-+ .name = "DES ECB",
-+ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_ECB | KEYLEN_192,
-+ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_ECB | KEYLEN_192,
-+ .block_len = 8,
-+ .type = CIPHER_TYPE_DES,
-+ .mode = CIPHER_MODE_ECB,
-+},{
-+ .name = "DES CBC",
-+ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_CBC_ENC | KEYLEN_192,
-+ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_CBC_DEC | KEYLEN_192,
-+ .iv_len = 8,
-+ .block_len = 8,
-+ .type = CIPHER_TYPE_DES,
-+ .mode = CIPHER_MODE_CBC,
-+},{
-+ .name = "3DES ECB",
-+ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_ECB | KEYLEN_192,
-+ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_ECB | KEYLEN_192,
-+ .block_len = 8,
-+ .type = CIPHER_TYPE_3DES,
-+ .mode = CIPHER_MODE_ECB,
-+},{
-+ .name = "3DES CBC",
-+ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_CBC_ENC | KEYLEN_192,
-+ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_CBC_DEC | KEYLEN_192,
-+ .iv_len = 8,
-+ .block_len = 8,
-+ .type = CIPHER_TYPE_3DES,
-+ .mode = CIPHER_MODE_CBC,
-+},{
-+ .name = "AES ECB",
-+ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_ECB,
-+ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_ECB,
-+ .block_len = 16,
-+ .type = CIPHER_TYPE_AES,
-+ .mode = CIPHER_MODE_ECB,
-+},{
-+ .name = "AES CBC",
-+ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CBC_ENC,
-+ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_CBC_DEC,
-+ .block_len = 16,
-+ .iv_len = 16,
-+ .type = CIPHER_TYPE_AES,
-+ .mode = CIPHER_MODE_CBC,
-+},{
-+ .name = "AES CTR",
-+ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CTR,
-+ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CTR,
-+ .block_len = 16,
-+ .iv_len = 16,
-+ .type = CIPHER_TYPE_AES,
-+ .mode = CIPHER_MODE_CTR,
-+#if 0
-+},{
-+ .name = "AES CCM",
-+ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CCM_ENC,
-+ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CCM_DEC,
-+ .block_len = 16,
-+ .iv_len = 16,
-+ .type = CIPHER_TYPE_AES,
-+ .mode = CIPHER_MODE_CCM,
-+#endif
-+} };
-+
-+const struct ix_hash_algo *ix_hash_by_id(int type)
-+{
-+ int i;
-+
-+ for(i=0; i<ARRAY_SIZE(_hash_algos); i++) {
-+ if (_hash_algos[i].type == type)
-+ return _hash_algos + i;
-+ }
-+ return NULL;
-+}
-+
-+const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode)
-+{
-+ int i;
-+
-+ for(i=0; i<ARRAY_SIZE(_cipher_algos); i++) {
-+ if (_cipher_algos[i].type==type && _cipher_algos[i].mode==mode)
-+ return _cipher_algos + i;
-+ }
-+ return NULL;
-+}
-+
-+static void irqcb_recv(struct qm_queue *queue);
-+
-+static int init_sa_master(struct ix_sa_master *master)
-+{
-+ struct npe_info *npe;
-+ int ret = -ENODEV;
-+
-+ if (! (ix_fuse() & (IX_FUSE_HASH | IX_FUSE_AES | IX_FUSE_DES))) {
-+ printk(KERN_ERR "ixp_crypto: No HW crypto available\n");
-+ return ret;
-+ }
-+ memset(master, 0, sizeof(struct ix_sa_master));
-+ master->npe_dev = get_npe_by_id(NPE_ID);
-+ if (! master->npe_dev)
-+ goto err;
-+
-+ npe = dev_get_drvdata(master->npe_dev);
-+
-+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
-+ switch (npe->img_info[1]) {
-+ case 4:
-+ printk(KERN_INFO "Crypto AES avaialable\n");
-+ break;
-+ case 5:
-+ printk(KERN_INFO "Crypto AES and CCM avaialable\n");
-+ break;
-+ default:
-+ printk(KERN_WARNING "Current microcode for %s has no"
-+ " crypto capabilities\n", npe->plat->name);
-+ break;
-+ }
-+ }
-+ rwlock_init(&master->lock);
-+ master->dmapool = dma_pool_create("ixp4xx_crypto", master->npe_dev,
-+ sizeof(struct npe_crypt_cont), 32, 0);
-+ if (!master->dmapool) {
-+ ret = -ENOMEM;
-+ goto err;
-+ }
-+ master->sendq = request_queue(SEND_QID, QUEUE_SIZE);
-+ if (IS_ERR(master->sendq)) {
-+ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n",
-+ SEND_QID);
-+ ret = PTR_ERR(master->sendq);
-+ goto err;
-+ }
-+ master->recvq = request_queue(RECV_QID, QUEUE_SIZE);
-+ if (IS_ERR(master->recvq)) {
-+ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n",
-+ RECV_QID);
-+ ret = PTR_ERR(master->recvq);
-+ release_queue(master->sendq);
-+ goto err;
-+ }
-+
-+ master->recvq->irq_cb = irqcb_recv;
-+ queue_set_watermarks(master->recvq, 0, 0);
-+ queue_set_irq_src(master->recvq, Q_IRQ_ID_NOT_E);
-+ queue_enable_irq(master->recvq);
-+ printk(KERN_INFO "ixp4xx_crypto " MY_VERSION " registered successfully\n");
-+
-+ return 0;
-+err:
-+ if (master->dmapool)
-+ dma_pool_destroy(master->dmapool);
-+ if (! master->npe_dev)
-+ put_device(master->npe_dev);
-+ return ret;
-+
-+}
-+
-+static void release_sa_master(struct ix_sa_master *master)
-+{
-+ struct npe_crypt_cont *cont;
-+ unsigned long flags;
-+
-+ write_lock_irqsave(&master->lock, flags);
-+ while (master->pool) {
-+ cont = master->pool;
-+ master->pool = cont->next;
-+ dma_pool_free(master->dmapool, cont, cont->phys);
-+ master->pool_size--;
-+ }
-+ write_unlock_irqrestore(&master->lock, flags);
-+ if (master->pool_size) {
-+ printk(KERN_ERR "ixp4xx_crypto: %d items lost from DMA pool\n",
-+ master->pool_size);
-+ }
-+
-+ dma_pool_destroy(master->dmapool);
-+ release_queue(master->sendq);
-+ release_queue(master->recvq);
-+ return_npe_dev(master->npe_dev);
-+}
-+
-+static struct npe_crypt_cont *ix_sa_get_cont(struct ix_sa_master *master)
-+{
-+ unsigned long flags;
-+ struct npe_crypt_cont *cont;
-+ dma_addr_t handle;
-+
-+ write_lock_irqsave(&master->lock, flags);
-+ if (!master->pool) {
-+ cont = dma_pool_alloc(master->dmapool, GFP_ATOMIC, &handle);
-+ if (cont) {
-+ master->pool_size++;
-+ cont->phys = handle;
-+ cont->virt = cont;
-+ }
-+ } else {
-+ cont = master->pool;
-+ master->pool = cont->next;
-+ }
-+ write_unlock_irqrestore(&master->lock, flags);
-+ return cont;
-+}
-+
-+static void
-+ix_sa_return_cont(struct ix_sa_master *master,struct npe_crypt_cont *cont)
-+{
-+ unsigned long flags;
-+
-+ write_lock_irqsave(&master->lock, flags);
-+ cont->next = master->pool;
-+ master->pool = cont;
-+ write_unlock_irqrestore(&master->lock, flags);
-+}
-+
-+static void free_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir)
-+{
-+ memset(dir->npe_ctx, 0, NPE_CTX_LEN);
-+ dma_pool_free(sa_ctx->master->dmapool, dir->npe_ctx,
-+ dir->npe_ctx_phys);
-+}
-+
-+static void ix_sa_ctx_destroy(struct ix_sa_ctx *sa_ctx)
-+{
-+ BUG_ON(sa_ctx->state != STATE_UNLOADING);
-+ free_sa_dir(sa_ctx, &sa_ctx->encrypt);
-+ free_sa_dir(sa_ctx, &sa_ctx->decrypt);
-+ kfree(sa_ctx);
-+ module_put(THIS_MODULE);
-+}
-+
-+static void recv_pack(struct qm_queue *queue, u32 phys)
-+{
-+ struct ix_sa_ctx *sa_ctx;
-+ struct npe_crypt_cont *cr_cont;
-+ struct npe_cont *cont;
-+ int failed;
-+
-+ failed = phys & 0x1;
-+ phys &= ~0x3;
-+
-+ cr_cont = dma_to_virt(queue->dev, phys);
-+ cr_cont = cr_cont->virt;
-+ sa_ctx = cr_cont->ctl.crypt.sa_ctx;
-+
-+ phys = npe_to_cpu32(cr_cont->ctl.crypt.src_buf);
-+ if (phys) {
-+ cont = dma_to_virt(queue->dev, phys);
-+ cont = cont->virt;
-+ } else {
-+ cont = NULL;
-+ }
-+ if (cr_cont->ctl.crypt.oper_type == OP_PERFORM) {
-+ dma_unmap_single(sa_ctx->master->npe_dev,
-+ cont->eth.phys_addr,
-+ cont->eth.buf_len,
-+ DMA_BIDIRECTIONAL);
-+ if (sa_ctx->perf_cb)
-+ sa_ctx->perf_cb(sa_ctx, cont->data, failed);
-+ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
-+ ix_sa_return_cont(sa_ctx->master, cr_cont);
-+ if (atomic_dec_and_test(&sa_ctx->use_cnt))
-+ ix_sa_ctx_destroy(sa_ctx);
-+ return;
-+ }
-+
-+ /* We are registering */
-+ switch (cr_cont->ctl.crypt.mode) {
-+ case NPE_OP_HASH_GEN_ICV:
-+ /* 1 out of 2 HMAC preparation operations completed */
-+ dma_unmap_single(sa_ctx->master->npe_dev,
-+ cont->eth.phys_addr,
-+ cont->eth.buf_len,
-+ DMA_TO_DEVICE);
-+ kfree(cont->data);
-+ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
-+ break;
-+ case NPE_OP_ENC_GEN_KEY:
-+ memcpy(sa_ctx->decrypt.npe_ctx + sizeof(u32),
-+ sa_ctx->rev_aes->ctl.rev_aes_key + sizeof(u32),
-+ sa_ctx->c_key.len);
-+ /* REV AES data not needed anymore, free it */
-+ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
-+ sa_ctx->rev_aes = NULL;
-+ break;
-+ default:
-+ printk(KERN_ERR "Unknown crypt-register mode: %x\n",
-+ cr_cont->ctl.crypt.mode);
-+
-+ }
-+ if (cr_cont->ctl.crypt.oper_type == OP_REG_DONE) {
-+ if (sa_ctx->state == STATE_UNREGISTERED)
-+ sa_ctx->state = STATE_REGISTERED;
-+ if (sa_ctx->reg_cb)
-+ sa_ctx->reg_cb(sa_ctx, failed);
-+ }
-+ ix_sa_return_cont(sa_ctx->master, cr_cont);
-+ if (atomic_dec_and_test(&sa_ctx->use_cnt))
-+ ix_sa_ctx_destroy(sa_ctx);
-+}
-+
-+static void irqcb_recv(struct qm_queue *queue)
-+{
-+ u32 phys;
-+
-+ queue_ack_irq(queue);
-+ while ((phys = queue_get_entry(queue)))
-+ recv_pack(queue, phys);
-+}
-+
-+static int init_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir)
-+{
-+ dir->npe_ctx = dma_pool_alloc(sa_ctx->master->dmapool,
-+ sa_ctx->gfp_flags, &dir->npe_ctx_phys);
-+ if (!dir->npe_ctx) {
-+ return 1;
-+ }
-+ memset(dir->npe_ctx, 0, NPE_CTX_LEN);
-+ return 0;
-+}
-+
-+struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags)
-+{
-+ struct ix_sa_ctx *sa_ctx;
-+ struct ix_sa_master *master = &sa_master;
-+ struct npe_info *npe = dev_get_drvdata(master->npe_dev);
-+
-+ /* first check if Microcode was downloaded into this NPE */
-+ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) {
-+ printk(KERN_ERR "%s not running\n", npe->plat->name);
-+ return NULL;
-+ }
-+ switch (npe->img_info[1]) {
-+ case 4:
-+ case 5:
-+ break;
-+ default:
-+ /* No crypto Microcode */
-+ return NULL;
-+ }
-+ if (!try_module_get(THIS_MODULE)) {
-+ return NULL;
-+ }
-+
-+ sa_ctx = kzalloc(sizeof(struct ix_sa_ctx) + priv_len, flags);
-+ if (!sa_ctx) {
-+ goto err_put;
-+ }
-+
-+ sa_ctx->master = master;
-+ sa_ctx->gfp_flags = flags;
-+
-+ if (init_sa_dir(sa_ctx, &sa_ctx->encrypt))
-+ goto err_free;
-+ if (init_sa_dir(sa_ctx, &sa_ctx->decrypt)) {
-+ free_sa_dir(sa_ctx, &sa_ctx->encrypt);
-+ goto err_free;
-+ }
-+ if (priv_len)
-+ sa_ctx->priv = sa_ctx + 1;
-+
-+ atomic_set(&sa_ctx->use_cnt, 1);
-+ return sa_ctx;
-+
-+err_free:
-+ kfree(sa_ctx);
-+err_put:
-+ module_put(THIS_MODULE);
-+ return NULL;
-+}
-+
-+void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx)
-+{
-+ sa_ctx->state = STATE_UNLOADING;
-+ if (atomic_dec_and_test(&sa_ctx->use_cnt))
-+ ix_sa_ctx_destroy(sa_ctx);
-+ else
-+ printk("ix_sa_ctx_free -> delayed: %p %d\n",
-+ sa_ctx, atomic_read(&sa_ctx->use_cnt));
-+}
-+
-+/* http://www.ietf.org/rfc/rfc2104.txt */
-+#define HMAC_IPAD_VALUE 0x36
-+#define HMAC_OPAD_VALUE 0x5C
-+#define PAD_BLOCKLEN 64
-+
-+static int register_chain_var(struct ix_sa_ctx *sa_ctx,
-+ unsigned char *pad, u32 target, int init_len, u32 ctx_addr, int oper)
-+{
-+ struct npe_crypt_cont *cr_cont;
-+ struct npe_cont *cont;
-+
-+ cr_cont = ix_sa_get_cont(sa_ctx->master);
-+ if (!cr_cont)
-+ return -ENOMEM;
-+
-+ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
-+ cr_cont->ctl.crypt.auth_offs = 0;
-+ cr_cont->ctl.crypt.auth_len =cpu_to_npe16(PAD_BLOCKLEN);
-+ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(ctx_addr);
-+
-+ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev));
-+ if (!cont) {
-+ ix_sa_return_cont(sa_ctx->master, cr_cont);
-+ return -ENOMEM;
-+ }
-+
-+ cont->data = pad;
-+ cont->eth.next = 0;
-+ cont->eth.buf_len = cpu_to_npe16(PAD_BLOCKLEN);
-+ cont->eth.pkt_len = 0;
-+
-+ cont->eth.phys_addr = cpu_to_npe32(dma_map_single(
-+ sa_ctx->master->npe_dev, pad, PAD_BLOCKLEN, DMA_TO_DEVICE));
-+
-+ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys);
-+ cr_cont->ctl.crypt.oper_type = oper;
-+
-+ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(target);
-+ cr_cont->ctl.crypt.mode = NPE_OP_HASH_GEN_ICV;
-+ cr_cont->ctl.crypt.init_len = init_len;
-+
-+ atomic_inc(&sa_ctx->use_cnt);
-+ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
-+ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */
-+ atomic_dec(&sa_ctx->use_cnt);
-+ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev),
-+ cont);
-+ ix_sa_return_cont(sa_ctx->master, cr_cont);
-+ return -ENOMEM;
-+ }
-+ return 0;
-+}
-+
-+/* Return value
-+ * 0 if nothing registered,
-+ * 1 if something registered and
-+ * < 0 on error
-+ */
-+static int ix_sa_ctx_setup_auth(struct ix_sa_ctx *sa_ctx,
-+ const struct ix_hash_algo *algo, int len, int oper, int encrypt)
-+{
-+ unsigned char *ipad, *opad;
-+ u32 itarget, otarget, ctx_addr;
-+ unsigned char *cinfo;
-+ int init_len, i, ret = 0;
-+ struct qm_qmgr *qmgr;
-+ struct ix_sa_dir *dir;
-+ u32 cfgword;
-+
-+ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
-+ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
-+
-+ qmgr = dev_get_drvdata(sa_ctx->master->sendq->dev);
-+
-+ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
-+ sa_ctx->h_algo = algo;
-+
-+ if (!algo) {
-+ dir->npe_mode |= NPE_OP_HMAC_DISABLE;
-+ return 0;
-+ }
-+ if (algo->type == HASH_TYPE_CBCMAC) {
-+ dir->npe_mode |= NPE_OP_CCM_ENABLE | NPE_OP_HMAC_DISABLE;
-+ return 0;
-+ }
-+ if (sa_ctx->h_key.len > 64 || sa_ctx->h_key.len < algo->digest_len)
-+ return -EINVAL;
-+ if (len > algo->digest_len || (len % 4))
-+ return -EINVAL;
-+ if (!len)
-+ len = algo->digest_len;
-+
-+ sa_ctx->digest_len = len;
-+
-+ /* write cfg word to cryptinfo */
-+ cfgword = algo->cfgword | ((len/4) << 8);
-+ *(u32*)cinfo = cpu_to_be32(cfgword);
-+ cinfo += sizeof(cfgword);
-+
-+ /* write ICV to cryptinfo */
-+ memcpy(cinfo, algo->icv, algo->digest_len);
-+ cinfo += algo->digest_len;
-+
-+ itarget = dir->npe_ctx_phys + dir->npe_ctx_idx
-+ + sizeof(algo->cfgword);
-+ otarget = itarget + algo->digest_len;
-+
-+ opad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA);
-+ if (!opad) {
-+ return -ENOMEM;
-+ }
-+ ipad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA);
-+ if (!ipad) {
-+ kfree(opad);
-+ return -ENOMEM;
-+ }
-+ memcpy(ipad, sa_ctx->h_key.key, sa_ctx->h_key.len);
-+ memcpy(opad, sa_ctx->h_key.key, sa_ctx->h_key.len);
-+ for (i = 0; i < PAD_BLOCKLEN; i++) {
-+ ipad[i] ^= HMAC_IPAD_VALUE;
-+ opad[i] ^= HMAC_OPAD_VALUE;
-+ }
-+ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx);
-+ ctx_addr = dir->npe_ctx_phys + dir->npe_ctx_idx;
-+
-+ dir->npe_ctx_idx += init_len;
-+ dir->npe_mode |= NPE_OP_HASH_ENABLE;
-+
-+ if (!encrypt)
-+ dir->npe_mode |= NPE_OP_HASH_VERIFY;
-+
-+ /* register first chainvar */
-+ ret = register_chain_var(sa_ctx, opad, otarget,
-+ init_len, ctx_addr, OP_REGISTER);
-+ if (ret) {
-+ kfree(ipad);
-+ kfree(opad);
-+ return ret;
-+ }
-+
-+ /* register second chainvar */
-+ ret = register_chain_var(sa_ctx, ipad, itarget,
-+ init_len, ctx_addr, oper);
-+ if (ret) {
-+ kfree(ipad);
-+ return ret;
-+ }
-+
-+ return 1;
-+}
-+
-+static int gen_rev_aes_key(struct ix_sa_ctx *sa_ctx,
-+ u32 keylen_cfg, int cipher_op)
-+{
-+ unsigned char *cinfo;
-+ struct npe_crypt_cont *cr_cont;
-+
-+ keylen_cfg |= CIPH_ENCR | ALGO_AES | MOD_ECB;
-+ sa_ctx->rev_aes = ix_sa_get_cont(sa_ctx->master);
-+ if (!sa_ctx->rev_aes)
-+ return -ENOMEM;
-+
-+ cinfo = sa_ctx->rev_aes->ctl.rev_aes_key;
-+ *(u32*)cinfo = cpu_to_be32(keylen_cfg);
-+ cinfo += sizeof(keylen_cfg);
-+
-+ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len);
-+
-+ cr_cont = ix_sa_get_cont(sa_ctx->master);
-+ if (!cr_cont) {
-+ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
-+ sa_ctx->rev_aes = NULL;
-+ return -ENOMEM;
-+ }
-+ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
-+ cr_cont->ctl.crypt.oper_type = cipher_op;
-+
-+ cr_cont->ctl.crypt.crypt_offs = 0;
-+ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(AES_BLOCK128);
-+ cr_cont->ctl.crypt.addr.rev_aes = cpu_to_npe32(
-+ sa_ctx->rev_aes->phys + sizeof(keylen_cfg));
-+
-+ cr_cont->ctl.crypt.src_buf = 0;
-+ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(sa_ctx->rev_aes->phys);
-+ cr_cont->ctl.crypt.mode = NPE_OP_ENC_GEN_KEY;
-+ cr_cont->ctl.crypt.init_len = sa_ctx->decrypt.npe_ctx_idx;
-+
-+ atomic_inc(&sa_ctx->use_cnt);
-+ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
-+ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */
-+ atomic_dec(&sa_ctx->use_cnt);
-+ ix_sa_return_cont(sa_ctx->master, cr_cont);
-+ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes);
-+ sa_ctx->rev_aes = NULL;
-+ return -ENOMEM;
-+ }
-+
-+ return 1;
-+}
-+
-+/* Return value
-+ * 0 if nothing registered,
-+ * 1 if something registered and
-+ * < 0 on error
-+ */
-+static int ix_sa_ctx_setup_cipher(struct ix_sa_ctx *sa_ctx,
-+ const struct ix_cipher_algo *algo, int cipher_op, int encrypt)
-+{
-+ unsigned char *cinfo;
-+ int keylen, init_len;
-+ u32 cipher_cfg;
-+ u32 keylen_cfg = 0;
-+ struct ix_sa_dir *dir;
-+
-+ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
-+ cinfo = dir->npe_ctx + dir->npe_ctx_idx;
-+
-+ sa_ctx->c_algo = algo;
-+
-+ if (!algo)
-+ return 0;
-+
-+ if (algo->type == CIPHER_TYPE_DES && sa_ctx->c_key.len != 8)
-+ return -EINVAL;
-+
-+ if (algo->type == CIPHER_TYPE_3DES && sa_ctx->c_key.len != 24)
-+ return -EINVAL;
-+
-+ keylen = 24;
-+
-+ if (encrypt) {
-+ cipher_cfg = algo->cfgword_enc;
-+ dir->npe_mode |= NPE_OP_CRYPT_ENCRYPT;
-+ } else {
-+ cipher_cfg = algo->cfgword_dec;
-+ }
-+ if (algo->type == CIPHER_TYPE_AES) {
-+ switch (sa_ctx->c_key.len) {
-+ case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break;
-+ case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break;
-+ case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break;
-+ default: return -EINVAL;
-+ }
-+ keylen = sa_ctx->c_key.len;
-+ cipher_cfg |= keylen_cfg;
-+ }
-+
-+ /* write cfg word to cryptinfo */
-+ *(u32*)cinfo = cpu_to_be32(cipher_cfg);
-+ cinfo += sizeof(cipher_cfg);
-+
-+ /* write cipher key to cryptinfo */
-+ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len);
-+ cinfo += keylen;
-+
-+ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx);
-+ dir->npe_ctx_idx += init_len;
-+
-+ dir->npe_mode |= NPE_OP_CRYPT_ENABLE;
-+
-+ if (algo->type == CIPHER_TYPE_AES && !encrypt) {
-+ return gen_rev_aes_key(sa_ctx, keylen_cfg, cipher_op);
-+ }
-+
-+ return 0;
-+}
-+
-+/* returns 0 on OK, <0 on error and 1 on overflow */
-+int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr,
-+ int datalen, int c_offs, int c_len, int a_offs, int a_len,
-+ int hmac, char *iv, int encrypt)
-+{
-+ struct npe_crypt_cont *cr_cont;
-+ struct npe_cont *cont;
-+ u32 data_phys;
-+ int ret = -ENOMEM;
-+ struct ix_sa_dir *dir;
-+
-+ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt;
-+
-+ if (sa_ctx->state != STATE_REGISTERED)
-+ return -ENOENT;
-+
-+ cr_cont = ix_sa_get_cont(sa_ctx->master);
-+ if (!cr_cont)
-+ return ret;
-+
-+ cr_cont->ctl.crypt.sa_ctx = sa_ctx;
-+ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(dir->npe_ctx_phys);
-+ cr_cont->ctl.crypt.oper_type = OP_PERFORM;
-+ cr_cont->ctl.crypt.mode = dir->npe_mode;
-+ cr_cont->ctl.crypt.init_len = dir->npe_ctx_idx;
-+
-+ if (sa_ctx->c_algo) {
-+ cr_cont->ctl.crypt.crypt_offs = cpu_to_npe16(c_offs);
-+ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(c_len);
-+ if (sa_ctx->c_algo->iv_len) {
-+ if (!iv) {
-+ ret = -EINVAL;
-+ goto err_cr;
-+ }
-+ memcpy(cr_cont->ctl.crypt.iv, iv,
-+ sa_ctx->c_algo->iv_len);
-+ }
-+ }
-+
-+ if (sa_ctx->h_algo) {
-+ /* prepare hashing */
-+ cr_cont->ctl.crypt.auth_offs = cpu_to_npe16(a_offs);
-+ cr_cont->ctl.crypt.auth_len = cpu_to_npe16(a_len);
-+ }
-+
-+ data_phys = dma_map_single(sa_ctx->master->npe_dev,
-+ data, datalen, DMA_BIDIRECTIONAL);
-+ if (hmac)
-+ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(data_phys + hmac);
-+
-+ /* Prepare the data ptr */
-+ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev));
-+ if (!cont) {
-+ goto err_unmap;
-+ }
-+
-+ cont->data = ptr;
-+ cont->eth.next = 0;
-+ cont->eth.buf_len = cpu_to_npe16(datalen);
-+ cont->eth.pkt_len = 0;
-+
-+ cont->eth.phys_addr = cpu_to_npe32(data_phys);
-+ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys);
-+
-+ atomic_inc(&sa_ctx->use_cnt);
-+ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys);
-+ if (queue_stat(sa_ctx->master->sendq) != 2) {
-+ return 0;
-+ }
-+
-+ /* overflow */
-+ printk("%s: Overflow\n", __FUNCTION__);
-+ ret = -EAGAIN;
-+ atomic_dec(&sa_ctx->use_cnt);
-+ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev), cont);
-+
-+err_unmap:
-+ dma_unmap_single(sa_ctx->master->npe_dev, data_phys, datalen,
-+ DMA_BIDIRECTIONAL);
-+err_cr:
-+ ix_sa_return_cont(sa_ctx->master, cr_cont);
-+
-+ return ret;
-+}
-+
-+int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx,
-+ const struct ix_cipher_algo *cipher,
-+ const struct ix_hash_algo *auth, int len)
-+{
-+ int ret = 0, sum = 0;
-+ int cipher_op;
-+
-+ if (sa_ctx->state != STATE_UNREGISTERED)
-+ return -ENOENT;
-+
-+ atomic_inc(&sa_ctx->use_cnt);
-+
-+ cipher_op = auth ? OP_REGISTER : OP_REG_DONE;
-+ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, OP_REGISTER, 1)) < 0)
-+ goto out;
-+ sum += ret;
-+ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, cipher_op, 0)) < 0)
-+ goto out;
-+ sum += ret;
-+ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REGISTER, 1)) < 0)
-+ goto out;
-+ sum += ret;
-+ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REG_DONE, 0)) < 0)
-+ goto out;
-+ sum += ret;
-+
-+ /* Nothing registered ?
-+ * Ok, then we are done and call the callback here.
-+ */
-+ if (!sum) {
-+ if (sa_ctx->state == STATE_UNREGISTERED)
-+ sa_ctx->state = STATE_REGISTERED;
-+ if (sa_ctx->reg_cb)
-+ sa_ctx->reg_cb(sa_ctx, 0);
-+ }
-+out:
-+ atomic_dec(&sa_ctx->use_cnt);
-+ return ret;
-+}
-+
-+static int __init init_crypto(void)
-+{
-+ return init_sa_master(&sa_master);
-+}
-+
-+static void __exit finish_crypto(void)
-+{
-+ release_sa_master(&sa_master);
-+}
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
-+
-+EXPORT_SYMBOL(ix_hash_by_id);
-+EXPORT_SYMBOL(ix_cipher_by_id);
-+
-+EXPORT_SYMBOL(ix_sa_ctx_new);
-+EXPORT_SYMBOL(ix_sa_ctx_free);
-+EXPORT_SYMBOL(ix_sa_ctx_setup_cipher_auth);
-+EXPORT_SYMBOL(ix_sa_crypto_perform);
-+
-+module_init(init_crypto);
-+module_exit(finish_crypto);
-+
-Index: linux-2.6.21.7/drivers/net/ixp4xx/ixp4xx_qmgr.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/ixp4xx_qmgr.c
-@@ -0,0 +1,474 @@
-+/*
-+ * qmgr.c - reimplementation of the queue configuration interface.
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/dmapool.h>
-+#include <linux/interrupt.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+
-+#include <linux/ixp_qmgr.h>
-+#include <linux/ixp_npe.h>
-+
-+#define IXQMGR_VERSION "IXP4XX Q Manager 0.2.1"
-+
-+static struct device *qmgr_dev = NULL;
-+
-+static int poll_freq = 4000;
-+static int poll_enable = 0;
-+static u32 timer_countup_ticks;
-+
-+module_param(poll_freq, int, 0644);
-+module_param(poll_enable, int, 0644);
-+
-+int queue_len(struct qm_queue *queue)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ int diff, offs;
-+ u32 val;
-+
-+ offs = queue->id/8 + QUE_LOW_STAT0;
-+ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
-+
-+ diff = (val - (val >> 7)) & 0x7f;
-+ if (!diff) {
-+ /* diff == 0 means either empty or full, must look at STAT0 */
-+ if ((*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x04)
-+ diff = queue->len;
-+ }
-+ return diff;
-+}
-+
-+static int request_pool(struct device *dev, int count)
-+{
-+ int i;
-+ struct npe_cont *cont;
-+ struct qm_qmgr *qmgr = dev_get_drvdata(dev);
-+ dma_addr_t handle;
-+
-+ for (i=0; i<count; i++) {
-+ cont = dma_pool_alloc(qmgr->dmapool, GFP_KERNEL, &handle);
-+ if (!cont) {
-+ return -ENOMEM;
-+ }
-+ cont->phys = handle;
-+ cont->virt = cont;
-+ write_lock(&qmgr->lock);
-+ cont->next = qmgr->pool;
-+ qmgr->pool = cont;
-+ write_unlock(&qmgr->lock);
-+ }
-+ return 0;
-+}
-+
-+static int free_pool(struct device *dev, int count)
-+{
-+ int i;
-+ struct npe_cont *cont;
-+ struct qm_qmgr *qmgr = dev_get_drvdata(dev);
-+
-+ for (i=0; i<count; i++) {
-+ write_lock(&qmgr->lock);
-+ cont = qmgr->pool;
-+ if (!cont) {
-+ write_unlock(&qmgr->lock);
-+ return -1;
-+ }
-+ qmgr->pool = cont->next;
-+ write_unlock(&qmgr->lock);
-+ dma_pool_free(qmgr->dmapool, cont, cont->phys);
-+ }
-+ return 0;
-+}
-+
-+static int get_free_qspace(struct qm_qmgr *qmgr, int len)
-+{
-+ int words = (qmgr->res->end - qmgr->res->start + 1) / 4 -
-+ IX_QMGR_SRAM_SPACE;
-+ int i,q;
-+
-+ for (i=0; i<words; i+=len) {
-+ for (q=0; q<MAX_QUEUES; q++) {
-+ struct qm_queue *qu = qmgr->queues[q];
-+ if (!qu)
-+ continue;
-+ if ((qu->addr + qu->len > i) && (qu->addr < i + len))
-+ break;
-+ }
-+ if (q == MAX_QUEUES) {
-+ /* we have a free address */
-+ return i;
-+ }
-+ }
-+ return -1;
-+}
-+
-+static inline int _log2(int x)
-+{
-+ int r=0;
-+ while(x>>=1)
-+ r++;
-+ return r;
-+}
-+
-+/*
-+ * 32bit Config registers at IX_QMGR_QUECONFIG_BASE_OFFSET[Qid]
-+ * 0 - 6 WRPTR Word offset to baseaddr (index 0 .. BSIZE-1)
-+ * 7 -13 RDPTR ''
-+ * 14 -21 BADDR baseaddr = (offset to IX_QMGR_QUEBUFFER_SPACE_OFFSET) >> 6
-+ * 22 -23 ESIZE entrySizeInWords (always 00 because entrySizeInWords==1)
-+ * 24 -25 BSIZE qSizeInWords 00=16,01=32,10=64,11=128
-+ * 26 -28 NE nearly empty
-+ * 29 -31 NF nearly full
-+ */
-+static int conf_q_regs(struct qm_queue *queue)
-+{
-+ int bsize = _log2(queue->len/16);
-+ int baddr = queue->addr + IX_QMGR_QCFG_SIZE;
-+
-+ /* +2, because baddr is in words and not in bytes */
-+ queue_write_cfg_reg(queue, (bsize << 24) | (baddr<<(14-6+2)) );
-+
-+ return 0;
-+}
-+
-+static void pmu_timer_restart(void)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ __asm__(" mcr p14,0,%0,c1,c1,0\n" /* write current counter */
-+ : : "r" (timer_countup_ticks));
-+
-+ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */
-+ " orr r1,r1,#1; "
-+ " mcr p14,0,r1,c5,c1,0; " /* clear overflow */
-+ " mcr p14,0,r1,c4,c1,0\n" /* enable interrupts */
-+ : : : "r1");
-+
-+ local_irq_restore(flags);
-+}
-+
-+static void pmu_timer_init(void)
-+{
-+ u32 controlRegisterMask =
-+ BIT(0) | /* enable counters */
-+ BIT(2); /* reset clock counter; */
-+
-+ /*
-+ * Compute the number of xscale cycles needed between each
-+ * PMU IRQ. This is done from the result of an OS calibration loop.
-+ *
-+ * For 533MHz CPU, 533000000 tick/s / 4000 times/sec = 138250
-+ * 4000 times/sec = 37 mbufs/interrupt at line rate
-+ * The pmu timer is reset to -138250 = 0xfffde3f6, to trigger an IRQ
-+ * when this up counter overflows.
-+ *
-+ * The multiplication gives a number of instructions per second.
-+ * which is close to the processor frequency, and then close to the
-+ * PMU clock rate.
-+ *
-+ * 2 is the number of instructions per loop
-+ *
-+ */
-+
-+ timer_countup_ticks = - ((loops_per_jiffy * HZ * 2) / poll_freq);
-+
-+ /* enable the CCNT (clock count) timer from the PMU */
-+ __asm__(" mcr p14,0,%0,c0,c1,0\n"
-+ : : "r" (controlRegisterMask));
-+}
-+
-+static void pmu_timer_disable(void)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */
-+ " and r1,r1,#0x1e; "
-+ " mcr p14,0,r1,c4,c1,0\n" /* disable interrupts */
-+ : : : "r1");
-+ local_irq_restore(flags);
-+}
-+
-+void queue_set_watermarks(struct qm_queue *queue, unsigned ne, unsigned nf)
-+{
-+ u32 val;
-+ /* calculate the register values
-+ * 0->0, 1->1, 2->2, 4->3, 8->4 16->5...*/
-+ ne = _log2(ne<<1) & 0x7;
-+ nf = _log2(nf<<1) & 0x7;
-+
-+ /* Mask out old watermarks */
-+ val = queue_read_cfg_reg(queue) & ~0xfc000000;
-+ queue_write_cfg_reg(queue, val | (ne << 26) | (nf << 29));
-+}
-+
-+int queue_set_irq_src(struct qm_queue *queue, int flag)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ u32 reg;
-+ int offs, bitoffs;
-+
-+ /* Q 0-7 are in REG0, 8-15 are in REG1, etc. They occupy 4 bits/Q */
-+ offs = queue->id/8 + INT0_SRC_SELREG0;
-+ bitoffs = (queue->id % 8)*4;
-+
-+ reg = *(qmgr->addr + offs) & ~(0xf << bitoffs);
-+ *(qmgr->addr + offs) = reg | (flag << bitoffs);
-+
-+ return 0;
-+}
-+
-+static irqreturn_t irq_qm1(int irq, void *dev_id)
-+{
-+ struct qm_qmgr *qmgr = dev_id;
-+ int offs, reg;
-+ struct qm_queue *queue;
-+
-+ if (poll_enable)
-+ pmu_timer_restart();
-+
-+ reg = *(qmgr->addr + QUE_INT_REG0);
-+ while(reg) {
-+ /*
-+ * count leading zeros. "offs" gets
-+ * the amount of leading 0 in "reg"
-+ */
-+ asm ("clz %0, %1;" : "=r"(offs) : "r"(reg));
-+ offs = 31 - offs;
-+ reg &= ~(1 << offs);
-+ queue = qmgr->queues[offs];
-+ if (likely(queue)) {
-+ if (likely(queue->irq_cb)) {
-+ queue->irq_cb(queue);
-+ } else {
-+ printk(KERN_ERR "Missing callback for Q %d\n",
-+ offs);
-+ }
-+ } else {
-+ printk(KERN_ERR "IRQ for unregistered Q %d\n", offs);
-+ }
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+struct qm_queue *request_queue(int qid, int len)
-+{
-+ int ram;
-+ struct qm_qmgr *qmgr;
-+ struct qm_queue *queue;
-+
-+ if (!qmgr_dev)
-+ return ERR_PTR(-ENODEV);
-+
-+ if ((qid < 0) || (qid > MAX_QUEUES))
-+ return ERR_PTR(-ERANGE);
-+
-+ switch (len) {
-+ case 16:
-+ case 32:
-+ case 64:
-+ case 128: break;
-+ default : return ERR_PTR(-EINVAL);
-+ }
-+
-+ qmgr = dev_get_drvdata(qmgr_dev);
-+
-+ if (qmgr->queues[qid]) {
-+ /* not an error, just in use already */
-+ return NULL;
-+ }
-+ if ((ram = get_free_qspace(qmgr, len)) < 0) {
-+ printk(KERN_ERR "No free SRAM space for this queue\n");
-+ return ERR_PTR(-ENOMEM);
-+ }
-+ if (!(queue = kzalloc(sizeof(struct qm_queue), GFP_KERNEL)))
-+ return ERR_PTR(-ENOMEM);
-+
-+ if (!try_module_get(THIS_MODULE)) {
-+ kfree(queue);
-+ return ERR_PTR(-ENODEV);
-+ }
-+
-+ queue->addr = ram;
-+ queue->len = len;
-+ queue->id = qid;
-+ queue->dev = get_device(qmgr_dev);
-+ queue->acc_reg = qmgr->addr + (4 * qid);
-+ qmgr->queues[qid] = queue;
-+ if (request_pool(qmgr_dev, len)) {
-+ printk(KERN_ERR "Failed to request DMA pool of Q %d\n", qid);
-+ }
-+
-+ conf_q_regs(queue);
-+ return queue;
-+}
-+
-+void release_queue(struct qm_queue *queue)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+
-+ BUG_ON(qmgr->queues[queue->id] != queue);
-+ qmgr->queues[queue->id] = NULL;
-+
-+ if (free_pool(queue->dev, queue->len)) {
-+ printk(KERN_ERR "Failed to release DMA pool of Q %d\n",
-+ queue->id);
-+ }
-+ queue_disable_irq(queue);
-+ queue_write_cfg_reg(queue, 0);
-+
-+ module_put(THIS_MODULE);
-+ put_device(queue->dev);
-+ kfree(queue);
-+}
-+
-+
-+
-+
-+static int qmgr_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct qm_qmgr *qmgr;
-+ int size, ret=0, i;
-+
-+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
-+ return -EIO;
-+
-+ if ((i = platform_get_irq(pdev, 0)) < 0)
-+ return -EIO;
-+
-+ if (!(qmgr = kzalloc(sizeof(struct qm_qmgr), GFP_KERNEL)))
-+ return -ENOMEM;
-+
-+ qmgr->irq = i;
-+ size = res->end - res->start +1;
-+ qmgr->res = request_mem_region(res->start, size, "ixp_qmgr");
-+ if (!qmgr->res) {
-+ ret = -EBUSY;
-+ goto out_free;
-+ }
-+
-+ qmgr->addr = ioremap(res->start, size);
-+ if (!qmgr->addr) {
-+ ret = -ENOMEM;
-+ goto out_rel;
-+ }
-+
-+ /* Reset Q registers */
-+ for (i=0; i<4; i++)
-+ *(qmgr->addr + QUE_LOW_STAT0 +i) = 0x33333333;
-+ for (i=0; i<10; i++)
-+ *(qmgr->addr + QUE_UO_STAT0 +i) = 0x0;
-+ for (i=0; i<4; i++)
-+ *(qmgr->addr + INT0_SRC_SELREG0 +i) = 0x0;
-+ for (i=0; i<2; i++) {
-+ *(qmgr->addr + QUE_IE_REG0 +i) = 0x00;
-+ *(qmgr->addr + QUE_INT_REG0 +i) = 0xffffffff;
-+ }
-+ for (i=0; i<64; i++) {
-+ *(qmgr->addr + IX_QMGR_QCFG_BASE + i) = 0x0;
-+ }
-+
-+ if (poll_enable) {
-+ pmu_timer_init();
-+ qmgr->irq = IRQ_IXP4XX_XSCALE_PMU;
-+ }
-+ ret = request_irq(qmgr->irq, irq_qm1, SA_SHIRQ | SA_INTERRUPT,
-+ "qmgr", qmgr);
-+ if (ret) {
-+ printk(KERN_ERR "Failed to request IRQ(%d)\n", qmgr->irq);
-+ ret = -EIO;
-+ goto out_rel;
-+ }
-+ if (poll_enable)
-+ pmu_timer_restart();
-+
-+ rwlock_init(&qmgr->lock);
-+ qmgr->dmapool = dma_pool_create("qmgr", &pdev->dev,
-+ sizeof(struct npe_cont), 32, 0);
-+ platform_set_drvdata(pdev, qmgr);
-+
-+ qmgr_dev = &pdev->dev;
-+
-+ printk(KERN_INFO IXQMGR_VERSION " initialized.\n");
-+
-+ return 0;
-+
-+out_rel:
-+ release_resource(qmgr->res);
-+out_free:
-+ kfree(qmgr);
-+ return ret;
-+}
-+
-+static int qmgr_remove(struct platform_device *pdev)
-+{
-+ struct qm_qmgr *qmgr = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i=0; i<MAX_QUEUES; i++) {
-+ if (qmgr->queues[i]) {
-+ printk(KERN_ERR "WARNING Unreleased Q: %d\n", i);
-+ release_queue(qmgr->queues[i]);
-+ }
-+ }
-+
-+ if (poll_enable)
-+ pmu_timer_disable();
-+
-+ synchronize_irq (qmgr->irq);
-+ free_irq(qmgr->irq, qmgr);
-+
-+ dma_pool_destroy(qmgr->dmapool);
-+ iounmap(qmgr->addr);
-+ release_resource(qmgr->res);
-+ platform_set_drvdata(pdev, NULL);
-+ qmgr_dev = NULL;
-+ kfree(qmgr);
-+ return 0;
-+}
-+
-+static struct platform_driver ixp4xx_qmgr = {
-+ .driver.name = "ixp4xx_qmgr",
-+ .probe = qmgr_probe,
-+ .remove = qmgr_remove,
-+};
-+
-+
-+static int __init init_qmgr(void)
-+{
-+ return platform_driver_register(&ixp4xx_qmgr);
-+}
-+
-+static void __exit finish_qmgr(void)
-+{
-+ platform_driver_unregister(&ixp4xx_qmgr);
-+}
-+
-+module_init(init_qmgr);
-+module_exit(finish_qmgr);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
-+
-+EXPORT_SYMBOL(request_queue);
-+EXPORT_SYMBOL(release_queue);
-+EXPORT_SYMBOL(queue_set_irq_src);
-+EXPORT_SYMBOL(queue_set_watermarks);
-+EXPORT_SYMBOL(queue_len);
-Index: linux-2.6.21.7/drivers/net/ixp4xx/mac.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/mac.h
-@@ -0,0 +1,275 @@
-+/*
-+ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/resource.h>
-+#include <linux/netdevice.h>
-+#include <linux/io.h>
-+#include <linux/mii.h>
-+#include <linux/workqueue.h>
-+#include <asm/hardware.h>
-+#include <linux/ixp_qmgr.h>
-+
-+/* 32 bit offsets to be added to u32 *pointers */
-+#define MAC_TX_CNTRL1 0x00 // 0x000
-+#define MAC_TX_CNTRL2 0x01 // 0x004
-+#define MAC_RX_CNTRL1 0x04 // 0x010
-+#define MAC_RX_CNTRL2 0x05 // 0x014
-+#define MAC_RANDOM_SEED 0x08 // 0x020
-+#define MAC_THRESH_P_EMPTY 0x0c // 0x030
-+#define MAC_THRESH_P_FULL 0x0e // 0x038
-+#define MAC_BUF_SIZE_TX 0x10 // 0x040
-+#define MAC_TX_DEFER 0x14 // 0x050
-+#define MAC_RX_DEFER 0x15 // 0x054
-+#define MAC_TX_TWO_DEFER_1 0x18 // 0x060
-+#define MAC_TX_TWO_DEFER_2 0x19 // 0x064
-+#define MAC_SLOT_TIME 0x1c // 0x070
-+#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23
-+#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27
-+#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d
-+#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35
-+#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register
-+#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41
-+#define MAC_CORE_CNTRL 0x7f // 0x1fC
-+
-+/* TX Control Register 1*/
-+
-+#define TX_CNTRL1_TX_EN BIT(0)
-+#define TX_CNTRL1_DUPLEX BIT(1)
-+#define TX_CNTRL1_RETRY BIT(2)
-+#define TX_CNTRL1_PAD_EN BIT(3)
-+#define TX_CNTRL1_FCS_EN BIT(4)
-+#define TX_CNTRL1_2DEFER BIT(5)
-+#define TX_CNTRL1_RMII BIT(6)
-+
-+/* TX Control Register 2 */
-+#define TX_CNTRL2_RETRIES_MASK 0xf
-+
-+/* RX Control Register 1 */
-+#define RX_CNTRL1_RX_EN BIT(0)
-+#define RX_CNTRL1_PADSTRIP_EN BIT(1)
-+#define RX_CNTRL1_CRC_EN BIT(2)
-+#define RX_CNTRL1_PAUSE_EN BIT(3)
-+#define RX_CNTRL1_LOOP_EN BIT(4)
-+#define RX_CNTRL1_ADDR_FLTR_EN BIT(5)
-+#define RX_CNTRL1_RX_RUNT_EN BIT(6)
-+#define RX_CNTRL1_BCAST_DIS BIT(7)
-+
-+/* RX Control Register 2 */
-+#define RX_CNTRL2_DEFER_EN BIT(0)
-+
-+/* Core Control Register */
-+#define CORE_RESET BIT(0)
-+#define CORE_RX_FIFO_FLUSH BIT(1)
-+#define CORE_TX_FIFO_FLUSH BIT(2)
-+#define CORE_SEND_JAM BIT(3)
-+#define CORE_MDC_EN BIT(4)
-+
-+/* Definitions for MII access routines*/
-+
-+#define MII_REG_SHL 16
-+#define MII_ADDR_SHL 21
-+
-+#define MII_GO BIT(31)
-+#define MII_WRITE BIT(26)
-+#define MII_READ_FAIL BIT(31)
-+
-+#define MII_TIMEOUT_10TH_SECS 5
-+#define MII_10TH_SEC_IN_MILLIS 100
-+
-+/*
-+ *
-+ * Default values
-+ *
-+ */
-+
-+#define MAC_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
-+
-+#define MAC_TX_CNTRL1_DEFAULT (\
-+ TX_CNTRL1_TX_EN | \
-+ TX_CNTRL1_RETRY | \
-+ TX_CNTRL1_FCS_EN | \
-+ TX_CNTRL1_2DEFER | \
-+ TX_CNTRL1_PAD_EN )
-+
-+#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f
-+
-+#define MAC_RX_CNTRL1_DEFAULT ( \
-+ RX_CNTRL1_PADSTRIP_EN | \
-+ RX_CNTRL1_CRC_EN | \
-+ RX_CNTRL1_RX_EN )
-+
-+#define MAC_RX_CNTRL2_DEFAULT 0x0
-+#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK
-+
-+/* Thresholds determined by NPE firmware FS */
-+#define MAC_THRESH_P_EMPTY_DEFAULT 0x12
-+#define MAC_THRESH_P_FULL_DEFAULT 0x30
-+
-+/* Number of bytes that must be in the tx fifo before
-+ * transmission commences */
-+#define MAC_BUF_SIZE_TX_DEFAULT 0x8
-+
-+/* One-part deferral values */
-+#define MAC_TX_DEFER_DEFAULT 0x15
-+#define MAC_RX_DEFER_DEFAULT 0x16
-+
-+/* Two-part deferral values... */
-+#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08
-+#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07
-+
-+/* This value applies to MII */
-+#define MAC_SLOT_TIME_DEFAULT 0x80
-+
-+/* This value applies to RMII */
-+#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF
-+
-+#define MAC_ADDR_MASK_DEFAULT 0xFF
-+
-+#define MAC_INT_CLK_THRESH_DEFAULT 0x1
-+/* The following is a value chosen at random */
-+#define MAC_RANDOM_SEED_DEFAULT 0x8
-+
-+/* By default we must configure the MAC to generate the MDC clock*/
-+#define CORE_DEFAULT (CORE_MDC_EN)
-+
-+/* End of Intel provided register information */
-+
-+extern int
-+mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg);
-+extern void
-+mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val);
-+extern void init_mdio(struct net_device *dev, int phy_id);
-+
-+struct mac_info {
-+ u32 __iomem *addr;
-+ struct resource *res;
-+ struct device *npe_dev;
-+ struct net_device *netdev;
-+ struct qm_qmgr *qmgr;
-+ struct qm_queue *rxq;
-+ struct qm_queue *txq;
-+ struct qm_queue *rxdoneq;
-+ u32 irqflags;
-+ struct net_device_stats stat;
-+ struct mii_if_info mii;
-+ struct delayed_work mdio_thread;
-+ int rxq_pkt;
-+ int txq_pkt;
-+ int unloading;
-+ struct mac_plat_info *plat;
-+ int npe_stat_num;
-+ spinlock_t rx_lock;
-+ u32 msg_enable;
-+};
-+
-+static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val)
-+{
-+ *(mac->addr + offset) = val;
-+}
-+static inline u32 mac_read_reg(struct mac_info *mac, int offset)
-+{
-+ return *(mac->addr + offset);
-+}
-+static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit)
-+{
-+ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit);
-+}
-+static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit)
-+{
-+ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit);
-+}
-+
-+static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd)
-+{
-+ int i;
-+ for(i=0; i<4; i++) {
-+ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff);
-+ cmd >>=8;
-+ }
-+}
-+
-+#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD)
-+#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS)
-+static inline u32 mac_mdio_read(struct mac_info *mac, int offset)
-+{
-+ int i;
-+ u32 data = 0;
-+ for(i=0; i<4; i++) {
-+ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8);
-+ }
-+ return data;
-+}
-+
-+static inline u32 mdio_cmd(int phy_addr, int phy_reg)
-+{
-+ return phy_addr << MII_ADDR_SHL |
-+ phy_reg << MII_REG_SHL |
-+ MII_GO;
-+}
-+
-+#define MAC_REG_LIST { \
-+ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \
-+ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \
-+ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \
-+ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \
-+ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \
-+ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \
-+ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \
-+ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \
-+ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \
-+ MAC_INT_CLK_THRESH, \
-+ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \
-+ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \
-+ MAC_CORE_CNTRL \
-+}
-+
-+#define NPE_STAT_NUM 34
-+#define NPE_STAT_NUM_BASE 22
-+#define NPE_Q_STAT_NUM 4
-+
-+#define NPE_Q_STAT_STRINGS \
-+ {"RX ready to use queue len "}, \
-+ {"RX received queue len "}, \
-+ {"TX to be send queue len "}, \
-+ {"TX done queue len "},
-+
-+#define NPE_STAT_STRINGS \
-+ {"StatsAlignmentErrors "}, \
-+ {"StatsFCSErrors "}, \
-+ {"StatsInternalMacReceiveErrors "}, \
-+ {"RxOverrunDiscards "}, \
-+ {"RxLearnedEntryDiscards "}, \
-+ {"RxLargeFramesDiscards "}, \
-+ {"RxSTPBlockedDiscards "}, \
-+ {"RxVLANTypeFilterDiscards "}, \
-+ {"RxVLANIdFilterDiscards "}, \
-+ {"RxInvalidSourceDiscards "}, \
-+ {"RxBlackListDiscards "}, \
-+ {"RxWhiteListDiscards "}, \
-+ {"RxUnderflowEntryDiscards "}, \
-+ {"StatsSingleCollisionFrames "}, \
-+ {"StatsMultipleCollisionFrames "}, \
-+ {"StatsDeferredTransmissions "}, \
-+ {"StatsLateCollisions "}, \
-+ {"StatsExcessiveCollsions "}, \
-+ {"StatsInternalMacTransmitErrors"}, \
-+ {"StatsCarrierSenseErrors "}, \
-+ {"TxLargeFrameDiscards "}, \
-+ {"TxVLANIdFilterDiscards "}, \
-+\
-+ {"RxValidFramesTotalOctets "}, \
-+ {"RxUcastPkts "}, \
-+ {"RxBcastPkts "}, \
-+ {"RxMcastPkts "}, \
-+ {"RxPkts64Octets "}, \
-+ {"RxPkts65to127Octets "}, \
-+ {"RxPkts128to255Octets "}, \
-+ {"RxPkts256to511Octets "}, \
-+ {"RxPkts512to1023Octets "}, \
-+ {"RxPkts1024to1518Octets "}, \
-+ {"RxInternalNPEReceiveErrors "}, \
-+ {"TxInternalNPETransmitErrors "}
-+
-Index: linux-2.6.21.7/drivers/net/ixp4xx/mac_driver.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/mac_driver.c
-@@ -0,0 +1,850 @@
-+/*
-+ * mac_driver.c - provide a network interface for each MAC
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/workqueue.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+
-+
-+#include <linux/ixp_qmgr.h>
-+#include <linux/ixp_npe.h>
-+#include "mac.h"
-+
-+#define MDIO_INTERVAL (3*HZ)
-+#define RX_QUEUE_PREFILL 64
-+#define TX_QUEUE_PREFILL 16
-+
-+#define IXMAC_NAME "ixp4xx_mac"
-+#define IXMAC_VERSION "0.3.1"
-+
-+#define MAC_DEFAULT_REG(mac, name) \
-+ mac_write_reg(mac, MAC_ ## name, MAC_ ## name ## _DEFAULT)
-+
-+#define TX_DONE_QID 31
-+
-+#define DMA_ALLOC_SIZE 2048
-+#define DMA_HDR_SIZE (sizeof(struct npe_cont))
-+#define DMA_BUF_SIZE (DMA_ALLOC_SIZE - DMA_HDR_SIZE)
-+
-+/* Since the NPEs use 1 Return Q for sent frames, we need a device
-+ * independent return Q. We call it tx_doneq.
-+ * It will be initialized during module load and uninitialized
-+ * during module unload. Evil hack, but there is no choice :-(
-+ */
-+
-+static struct qm_queue *tx_doneq = NULL;
-+static int debug = -1;
-+module_param(debug, int, 0);
-+
-+static int init_buffer(struct qm_queue *queue, int count)
-+{
-+ int i;
-+ struct npe_cont *cont;
-+
-+ for (i=0; i<count; i++) {
-+ cont = kmalloc(DMA_ALLOC_SIZE, GFP_KERNEL | GFP_DMA);
-+ if (!cont)
-+ goto err;
-+
-+ cont->phys = dma_map_single(queue->dev, cont, DMA_ALLOC_SIZE,
-+ DMA_BIDIRECTIONAL);
-+ if (dma_mapping_error(cont->phys))
-+ goto err;
-+
-+ cont->data = cont+1;
-+ /* now the buffer is on a 32 bit boundary.
-+ * we add 2 bytes for good alignment to SKB */
-+ cont->data+=2;
-+ cont->eth.next = 0;
-+ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
-+ cont->eth.pkt_len = 0;
-+ /* also add 2 alignment bytes from cont->data*/
-+ cont->eth.phys_addr = cpu_to_npe32(cont->phys+ DMA_HDR_SIZE+ 2);
-+
-+ dma_sync_single(queue->dev, cont->phys, DMA_HDR_SIZE,
-+ DMA_TO_DEVICE);
-+
-+ queue_put_entry(queue, cont->phys);
-+ if (queue_stat(queue) == 2) { /* overflow */
-+ dma_unmap_single(queue->dev, cont->phys, DMA_ALLOC_SIZE,
-+ DMA_BIDIRECTIONAL);
-+ goto err;
-+ }
-+ }
-+ return i;
-+err:
-+ if (cont)
-+ kfree(cont);
-+ return i;
-+}
-+
-+static int destroy_buffer(struct qm_queue *queue, int count)
-+{
-+ u32 phys;
-+ int i;
-+ struct npe_cont *cont;
-+
-+ for (i=0; i<count; i++) {
-+ phys = queue_get_entry(queue) & ~0xf;
-+ if (!phys)
-+ break;
-+ dma_unmap_single(queue->dev, phys, DMA_ALLOC_SIZE,
-+ DMA_BIDIRECTIONAL);
-+ cont = dma_to_virt(queue->dev, phys);
-+ kfree(cont);
-+ }
-+ return i;
-+}
-+
-+static void mac_init(struct mac_info *mac)
-+{
-+ MAC_DEFAULT_REG(mac, TX_CNTRL2);
-+ MAC_DEFAULT_REG(mac, RANDOM_SEED);
-+ MAC_DEFAULT_REG(mac, THRESH_P_EMPTY);
-+ MAC_DEFAULT_REG(mac, THRESH_P_FULL);
-+ MAC_DEFAULT_REG(mac, TX_DEFER);
-+ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_1);
-+ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_2);
-+ MAC_DEFAULT_REG(mac, SLOT_TIME);
-+ MAC_DEFAULT_REG(mac, INT_CLK_THRESH);
-+ MAC_DEFAULT_REG(mac, BUF_SIZE_TX);
-+ MAC_DEFAULT_REG(mac, TX_CNTRL1);
-+ MAC_DEFAULT_REG(mac, RX_CNTRL1);
-+}
-+
-+static void mac_set_uniaddr(struct net_device *dev)
-+{
-+ int i;
-+ struct mac_info *mac = netdev_priv(dev);
-+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
-+
-+ /* check for multicast */
-+ if (dev->dev_addr[0] & 1)
-+ return;
-+
-+ npe_mh_setportaddr(npe, mac->plat, dev->dev_addr);
-+ npe_mh_disable_firewall(npe, mac->plat);
-+ for (i=0; i<dev->addr_len; i++)
-+ mac_write_reg(mac, MAC_UNI_ADDR + i, dev->dev_addr[i]);
-+}
-+
-+static void update_duplex_mode(struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ if (netif_msg_link(mac)) {
-+ printk(KERN_DEBUG "Link of %s is %s-duplex\n", dev->name,
-+ mac->mii.full_duplex ? "full" : "half");
-+ }
-+ if (mac->mii.full_duplex) {
-+ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX);
-+ } else {
-+ mac_set_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX);
-+ }
-+}
-+
-+static int media_check(struct net_device *dev, int init)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+
-+ if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) {
-+ update_duplex_mode(dev);
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static void get_npe_stats(struct mac_info *mac, u32 *buf, int len, int reset)
-+{
-+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
-+ u32 phys;
-+
-+ memset(buf, len, 0);
-+ phys = dma_map_single(mac->npe_dev, buf, len, DMA_BIDIRECTIONAL);
-+ npe_mh_get_stats(npe, mac->plat, phys, reset);
-+ dma_unmap_single(mac->npe_dev, phys, len, DMA_BIDIRECTIONAL);
-+}
-+
-+static void irqcb_recv(struct qm_queue *queue)
-+{
-+ struct net_device *dev = queue->cb_data;
-+
-+ queue_ack_irq(queue);
-+ queue_disable_irq(queue);
-+ if (netif_running(dev))
-+ netif_rx_schedule(dev);
-+}
-+
-+int ix_recv(struct net_device *dev, int *budget, struct qm_queue *queue)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ struct sk_buff *skb;
-+ u32 phys;
-+ struct npe_cont *cont;
-+
-+ while (*budget > 0 && netif_running(dev) ) {
-+ int len;
-+ phys = queue_get_entry(queue) & ~0xf;
-+ if (!phys)
-+ break;
-+ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE,
-+ DMA_FROM_DEVICE);
-+ cont = dma_to_virt(queue->dev, phys);
-+ len = npe_to_cpu16(cont->eth.pkt_len) -4; /* strip FCS */
-+
-+ if (unlikely(netif_msg_rx_status(mac))) {
-+ printk(KERN_DEBUG "%s: RX packet size: %u\n",
-+ dev->name, len);
-+ queue_state(mac->rxq);
-+ queue_state(mac->rxdoneq);
-+ }
-+ skb = dev_alloc_skb(len + 2);
-+ if (likely(skb)) {
-+ skb->dev = dev;
-+ skb_reserve(skb, 2);
-+ dma_sync_single(queue->dev, cont->eth.phys_addr, len,
-+ DMA_FROM_DEVICE);
-+#ifdef CONFIG_NPE_ADDRESS_COHERENT
-+ /* swap the payload of the SKB */
-+ {
-+ u32 *t = (u32*)(skb->data-2);
-+ u32 *s = (u32*)(cont->data-2);
-+ int i, j = (len+5)/4;
-+ for (i=0; i<j; i++)
-+ t[i] = cpu_to_be32(s[i]);
-+ }
-+#else
-+ eth_copy_and_sum(skb, cont->data, len, 0);
-+#endif
-+ skb_put(skb, len);
-+ skb->protocol = eth_type_trans(skb, dev);
-+ dev->last_rx = jiffies;
-+ netif_receive_skb(skb);
-+ mac->stat.rx_packets++;
-+ mac->stat.rx_bytes += skb->len;
-+ } else {
-+ mac->stat.rx_dropped++;
-+ }
-+ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
-+ cont->eth.pkt_len = 0;
-+ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE, DMA_TO_DEVICE);
-+ queue_put_entry(mac->rxq, phys);
-+ dev->quota--;
-+ (*budget)--;
-+ }
-+
-+ return !budget;
-+}
-+
-+static int ix_poll(struct net_device *dev, int *budget)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ struct qm_queue *queue = mac->rxdoneq;
-+
-+ for (;;) {
-+ if (ix_recv(dev, budget, queue))
-+ return 1;
-+ netif_rx_complete(dev);
-+ queue_enable_irq(queue);
-+ if (!queue_len(queue))
-+ break;
-+ queue_disable_irq(queue);
-+ if (netif_rx_reschedule(dev, 0))
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static void ixmac_set_rx_mode (struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ struct dev_mc_list *mclist;
-+ u8 aset[dev->addr_len], aclear[dev->addr_len];
-+ int i,j;
-+
-+ if (dev->flags & IFF_PROMISC) {
-+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN);
-+ } else {
-+ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN);
-+
-+ mclist = dev->mc_list;
-+ memset(aset, 0xff, dev->addr_len);
-+ memset(aclear, 0x00, dev->addr_len);
-+ for (i = 0; mclist && i < dev->mc_count; i++) {
-+ for (j=0; j< dev->addr_len; j++) {
-+ aset[j] &= mclist->dmi_addr[j];
-+ aclear[j] |= mclist->dmi_addr[j];
-+ }
-+ mclist = mclist->next;
-+ }
-+ for (j=0; j< dev->addr_len; j++) {
-+ aclear[j] = aset[j] | ~aclear[j];
-+ }
-+ for (i=0; i<dev->addr_len; i++) {
-+ mac_write_reg(mac, MAC_ADDR + i, aset[i]);
-+ mac_write_reg(mac, MAC_ADDR_MASK + i, aclear[i]);
-+ }
-+ }
-+}
-+
-+static int ixmac_open (struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
-+ u32 buf[NPE_STAT_NUM];
-+ int i;
-+ u32 phys;
-+
-+ /* first check if the NPE is up and running */
-+ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) {
-+ printk(KERN_ERR "%s: %s not running\n", dev->name,
-+ npe->plat->name);
-+ return -EIO;
-+ }
-+ if (npe_mh_status(npe)) {
-+ printk(KERN_ERR "%s: %s not responding\n", dev->name,
-+ npe->plat->name);
-+ return -EIO;
-+ }
-+ mac->txq_pkt += init_buffer(mac->txq, TX_QUEUE_PREFILL - mac->txq_pkt);
-+ mac->rxq_pkt += init_buffer(mac->rxq, RX_QUEUE_PREFILL - mac->rxq_pkt);
-+
-+ queue_enable_irq(mac->rxdoneq);
-+
-+ /* drain all buffers from then RX-done-q to make the IRQ happen */
-+ while ((phys = queue_get_entry(mac->rxdoneq) & ~0xf)) {
-+ struct npe_cont *cont;
-+ cont = dma_to_virt(mac->rxdoneq->dev, phys);
-+ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
-+ cont->eth.pkt_len = 0;
-+ dma_sync_single(mac->rxdoneq->dev, phys, DMA_HDR_SIZE,
-+ DMA_TO_DEVICE);
-+ queue_put_entry(mac->rxq, phys);
-+ }
-+ mac_init(mac);
-+ npe_mh_set_rxqid(npe, mac->plat, mac->plat->rxdoneq_id);
-+ get_npe_stats(mac, buf, sizeof(buf), 1); /* reset stats */
-+ get_npe_stats(mac, buf, sizeof(buf), 0);
-+ /*
-+ * if the extended stats contain random values
-+ * the NPE image lacks extendet statistic counters
-+ */
-+ for (i=NPE_STAT_NUM_BASE; i<NPE_STAT_NUM; i++) {
-+ if (buf[i] >10000)
-+ break;
-+ }
-+ mac->npe_stat_num = i<NPE_STAT_NUM ? NPE_STAT_NUM_BASE : NPE_STAT_NUM;
-+ mac->npe_stat_num += NPE_Q_STAT_NUM;
-+
-+ mac_set_uniaddr(dev);
-+ media_check(dev, 1);
-+ ixmac_set_rx_mode(dev);
-+ netif_start_queue(dev);
-+ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL);
-+ if (netif_msg_ifup(mac)) {
-+ printk(KERN_DEBUG "%s: open " IXMAC_NAME
-+ " RX queue %d bufs, TX queue %d bufs\n",
-+ dev->name, mac->rxq_pkt, mac->txq_pkt);
-+ }
-+ return 0;
-+}
-+
-+static int ixmac_start_xmit (struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ struct npe_cont *cont;
-+ u32 phys;
-+ struct qm_queue *queue = mac->txq;
-+
-+ if (unlikely(skb->len > DMA_BUF_SIZE)) {
-+ dev_kfree_skb(skb);
-+ mac->stat.tx_errors++;
-+ return NETDEV_TX_OK;
-+ }
-+ phys = queue_get_entry(tx_doneq) & ~0xf;
-+ if (!phys)
-+ goto busy;
-+ cont = dma_to_virt(queue->dev, phys);
-+#ifdef CONFIG_NPE_ADDRESS_COHERENT
-+ /* swap the payload of the SKB */
-+ {
-+ u32 *s = (u32*)(skb->data-2);
-+ u32 *t = (u32*)(cont->data-2);
-+ int i,j = (skb->len+5) / 4;
-+ for (i=0; i<j; i++)
-+ t[i] = cpu_to_be32(s[i]);
-+ }
-+#else
-+ //skb_copy_and_csum_dev(skb, cont->data);
-+ memcpy(cont->data, skb->data, skb->len);
-+#endif
-+ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE);
-+ cont->eth.pkt_len = cpu_to_npe16(skb->len);
-+ /* disable VLAN functions in NPE image for now */
-+ cont->eth.flags = 0;
-+ dma_sync_single(queue->dev, phys, skb->len + DMA_HDR_SIZE,
-+ DMA_TO_DEVICE);
-+ queue_put_entry(queue, phys);
-+ if (queue_stat(queue) == 2) { /* overflow */
-+ queue_put_entry(tx_doneq, phys);
-+ goto busy;
-+ }
-+ dev_kfree_skb(skb);
-+
-+ mac->stat.tx_packets++;
-+ mac->stat.tx_bytes += skb->len;
-+ dev->trans_start = jiffies;
-+ if (netif_msg_tx_queued(mac)) {
-+ printk(KERN_DEBUG "%s: TX packet size %u\n",
-+ dev->name, skb->len);
-+ queue_state(mac->txq);
-+ queue_state(tx_doneq);
-+ }
-+ return NETDEV_TX_OK;
-+busy:
-+ return NETDEV_TX_BUSY;
-+}
-+
-+static int ixmac_close (struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+
-+ netif_stop_queue (dev);
-+ queue_disable_irq(mac->rxdoneq);
-+
-+ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt);
-+ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt);
-+
-+ cancel_rearming_delayed_work(&(mac->mdio_thread));
-+
-+ if (netif_msg_ifdown(mac)) {
-+ printk(KERN_DEBUG "%s: close " IXMAC_NAME
-+ " RX queue %d bufs, TX queue %d bufs\n",
-+ dev->name, mac->rxq_pkt, mac->txq_pkt);
-+ }
-+ return 0;
-+}
-+
-+static int ixmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ int rc, duplex_changed;
-+
-+ if (!netif_running(dev))
-+ return -EINVAL;
-+ if (!try_module_get(THIS_MODULE))
-+ return -ENODEV;
-+ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed);
-+ module_put(THIS_MODULE);
-+ if (duplex_changed)
-+ update_duplex_mode(dev);
-+ return rc;
-+}
-+
-+static struct net_device_stats *ixmac_stats (struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ return &mac->stat;
-+}
-+
-+static void ixmac_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
-+
-+ strcpy(info->driver, IXMAC_NAME);
-+ strcpy(info->version, IXMAC_VERSION);
-+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
-+ snprintf(info->fw_version, 32, "%d.%d func [%d]",
-+ npe->img_info[2], npe->img_info[3], npe->img_info[1]);
-+ }
-+ strncpy(info->bus_info, npe->plat->name, ETHTOOL_BUSINFO_LEN);
-+}
-+
-+static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ mii_ethtool_gset(&mac->mii, cmd);
-+ return 0;
-+}
-+
-+static int ixmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ int rc;
-+ rc = mii_ethtool_sset(&mac->mii, cmd);
-+ return rc;
-+}
-+
-+static int ixmac_nway_reset(struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ return mii_nway_restart(&mac->mii);
-+}
-+
-+static u32 ixmac_get_link(struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ return mii_link_ok(&mac->mii);
-+}
-+
-+static const int mac_reg_list[] = MAC_REG_LIST;
-+
-+static int ixmac_get_regs_len(struct net_device *dev)
-+{
-+ return ARRAY_SIZE(mac_reg_list);
-+}
-+
-+static void
-+ixmac_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
-+{
-+ int i;
-+ struct mac_info *mac = netdev_priv(dev);
-+ u8 *buf = regbuf;
-+
-+ for (i=0; i<regs->len; i++) {
-+ buf[i] = mac_read_reg(mac, mac_reg_list[i]);
-+ }
-+}
-+
-+static struct {
-+ const char str[ETH_GSTRING_LEN];
-+} ethtool_stats_keys[NPE_STAT_NUM + NPE_Q_STAT_NUM] = {
-+ NPE_Q_STAT_STRINGS
-+ NPE_STAT_STRINGS
-+};
-+
-+static void ixmac_get_strings(struct net_device *dev, u32 stringset, u8 *data)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ memcpy(data, ethtool_stats_keys, mac->npe_stat_num * ETH_GSTRING_LEN);
-+}
-+
-+static int ixmac_get_stats_count(struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ return mac->npe_stat_num;
-+}
-+
-+static u32 ixmac_get_msglevel(struct net_device *dev)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ return mac->msg_enable;
-+}
-+
-+static void ixmac_set_msglevel(struct net_device *dev, u32 datum)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ mac->msg_enable = datum;
-+}
-+
-+static void ixmac_get_ethtool_stats(struct net_device *dev,
-+ struct ethtool_stats *stats, u64 *data)
-+{
-+ int i;
-+ struct mac_info *mac = netdev_priv(dev);
-+ u32 buf[NPE_STAT_NUM];
-+
-+ data[0] = queue_len(mac->rxq);
-+ data[1] = queue_len(mac->rxdoneq);
-+ data[2] = queue_len(mac->txq);
-+ data[3] = queue_len(tx_doneq);
-+
-+ get_npe_stats(mac, buf, sizeof(buf), 0);
-+
-+ for (i=0; i<stats->n_stats-4; i++) {
-+ data[i+4] = npe_to_cpu32(buf[i]);
-+ }
-+}
-+
-+static struct ethtool_ops ixmac_ethtool_ops = {
-+ .get_drvinfo = ixmac_get_drvinfo,
-+ .get_settings = ixmac_get_settings,
-+ .set_settings = ixmac_set_settings,
-+ .nway_reset = ixmac_nway_reset,
-+ .get_link = ixmac_get_link,
-+ .get_msglevel = ixmac_get_msglevel,
-+ .set_msglevel = ixmac_set_msglevel,
-+ .get_regs_len = ixmac_get_regs_len,
-+ .get_regs = ixmac_get_regs,
-+ .get_perm_addr = ethtool_op_get_perm_addr,
-+ .get_strings = ixmac_get_strings,
-+ .get_stats_count = ixmac_get_stats_count,
-+ .get_ethtool_stats = ixmac_get_ethtool_stats,
-+};
-+
-+static void mac_mdio_thread(struct work_struct *work)
-+{
-+ struct mac_info *mac = container_of(work, struct mac_info,
-+ mdio_thread.work);
-+ struct net_device *dev = mac->netdev;
-+
-+ media_check(dev, 0);
-+ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL);
-+}
-+
-+static int mac_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct mac_info *mac;
-+ struct net_device *dev;
-+ struct npe_info *npe;
-+ struct mac_plat_info *plat = pdev->dev.platform_data;
-+ int size, ret;
-+
-+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) {
-+ return -EIO;
-+ }
-+ if (!(dev = alloc_etherdev (sizeof(struct mac_info)))) {
-+ return -ENOMEM;
-+ }
-+ SET_MODULE_OWNER(dev);
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+ mac = netdev_priv(dev);
-+ mac->netdev = dev;
-+
-+ size = res->end - res->start +1;
-+ mac->res = request_mem_region(res->start, size, IXMAC_NAME);
-+ if (!mac->res) {
-+ ret = -EBUSY;
-+ goto out_free;
-+ }
-+
-+ mac->addr = ioremap(res->start, size);
-+ if (!mac->addr) {
-+ ret = -ENOMEM;
-+ goto out_rel;
-+ }
-+
-+ dev->open = ixmac_open;
-+ dev->hard_start_xmit = ixmac_start_xmit;
-+ dev->poll = ix_poll;
-+ dev->stop = ixmac_close;
-+ dev->get_stats = ixmac_stats;
-+ dev->do_ioctl = ixmac_ioctl;
-+ dev->set_multicast_list = ixmac_set_rx_mode;
-+ dev->ethtool_ops = &ixmac_ethtool_ops;
-+
-+ dev->weight = 16;
-+ dev->tx_queue_len = 100;
-+
-+ mac->npe_dev = get_npe_by_id(plat->npe_id);
-+ if (!mac->npe_dev) {
-+ ret = -EIO;
-+ goto out_unmap;
-+ }
-+ npe = dev_get_drvdata(mac->npe_dev);
-+
-+ mac->rxq = request_queue(plat->rxq_id, 128);
-+ if (IS_ERR(mac->rxq)) {
-+ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxq_id);
-+ ret = -EBUSY;
-+ goto out_putmod;
-+ }
-+ mac->txq = request_queue(plat->txq_id, 128);
-+ if (IS_ERR(mac->txq)) {
-+ printk(KERN_ERR "Error requesting Q: %d\n", plat->txq_id);
-+ ret = -EBUSY;
-+ goto out_putmod;
-+ }
-+ mac->rxdoneq = request_queue(plat->rxdoneq_id, 128);
-+ if (IS_ERR(mac->rxdoneq)) {
-+ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxdoneq_id);
-+ ret = -EBUSY;
-+ goto out_putmod;
-+ }
-+ mac->rxdoneq->irq_cb = irqcb_recv;
-+ mac->rxdoneq->cb_data = dev;
-+ queue_set_watermarks(mac->rxdoneq, 0, 0);
-+ queue_set_irq_src(mac->rxdoneq, Q_IRQ_ID_NOT_E);
-+
-+ mac->qmgr = dev_get_drvdata(mac->rxq->dev);
-+ if (register_netdev (dev)) {
-+ ret = -EIO;
-+ goto out_putmod;
-+ }
-+
-+ mac->plat = plat;
-+ mac->npe_stat_num = NPE_STAT_NUM_BASE;
-+ mac->msg_enable = netif_msg_init(debug, MAC_DEF_MSG_ENABLE);
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_RESET);
-+ udelay(500);
-+ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
-+
-+ init_mdio(dev, plat->phy_id);
-+
-+ INIT_DELAYED_WORK(&mac->mdio_thread, mac_mdio_thread);
-+
-+ /* The place of the MAC address is very system dependent.
-+ * Here we use a random one to be replaced by one of the
-+ * following commands:
-+ * "ip link set address 02:03:04:04:04:01 dev eth0"
-+ * "ifconfig eth0 hw ether 02:03:04:04:04:07"
-+ */
-+
-+ if (is_zero_ether_addr(plat->hwaddr)) {
-+ random_ether_addr(dev->dev_addr);
-+ dev->dev_addr[5] = plat->phy_id;
-+ }
-+ else
-+ memcpy(dev->dev_addr, plat->hwaddr, 6);
-+
-+ printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION
-+ ": %s on %s with PHY[%d] initialized\n",
-+ dev->name, npe->plat->name, plat->phy_id);
-+
-+ return 0;
-+
-+out_putmod:
-+ if (mac->rxq)
-+ release_queue(mac->rxq);
-+ if (mac->txq)
-+ release_queue(mac->txq);
-+ if (mac->rxdoneq)
-+ release_queue(mac->rxdoneq);
-+ module_put(mac->npe_dev->driver->owner);
-+out_unmap:
-+ iounmap(mac->addr);
-+out_rel:
-+ release_resource(mac->res);
-+out_free:
-+ kfree(mac);
-+ return ret;
-+}
-+
-+static void drain_npe(struct mac_info *mac)
-+{
-+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
-+ struct npe_cont *cont;
-+ u32 phys;
-+ int loop = 0;
-+
-+ /* Now there are some skb hold by the NPE.
-+ * We switch the MAC in loopback mode and send a pseudo packet
-+ * that will be returned by the NPE in its last SKB.
-+ * We will also try to isolate the PHY to keep the packets internal.
-+ */
-+
-+ if (mac->txq_pkt <2)
-+ mac->txq_pkt += init_buffer(tx_doneq, 5);
-+
-+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
-+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
-+ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
-+
-+ npe_mh_npe_loopback_mode(npe, mac->plat, 1);
-+ mdelay(200);
-+
-+ while (mac->rxq_pkt && loop++ < 2000 ) {
-+ phys = queue_get_entry(tx_doneq) & ~0xf;
-+ if (!phys)
-+ break;
-+ cont = dma_to_virt(queue->dev, phys);
-+ /* actually the packets should never leave the system,
-+ * but if they do, they shall contain 0s instead of
-+ * intresting random data....
-+ */
-+ memset(cont->data, 0, 64);
-+ cont->eth.pkt_len = 64;
-+ dma_sync_single(mac->txq->dev, phys, 64 + DMA_HDR_SIZE,
-+ DMA_TO_DEVICE);
-+ queue_put_entry(mac->txq, phys);
-+ if (queue_stat(mac->txq) == 2) { /* overflow */
-+ queue_put_entry(tx_doneq, phys);
-+ break;
-+ }
-+ mdelay(1);
-+ mac->rxq_pkt -= destroy_buffer(mac->rxdoneq,
-+ mac->rxq_pkt);
-+ }
-+ npe_mh_npe_loopback_mode(npe, mac->plat, 0);
-+ }
-+ /* Flush MAC TX fifo to drain the bogus packages */
-+ mac_set_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
-+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_RX_EN);
-+ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_TX_EN);
-+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
-+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
-+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
-+}
-+
-+static int mac_remove(struct platform_device *pdev)
-+{
-+ struct net_device* dev = platform_get_drvdata(pdev);
-+ struct mac_info *mac = netdev_priv(dev);
-+
-+ unregister_netdev(dev);
-+
-+ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt);
-+ if (mac->rxq_pkt)
-+ drain_npe(mac);
-+
-+ mac->txq_pkt -= destroy_buffer(mac->txq, mac->txq_pkt);
-+ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt);
-+
-+ if (mac->rxq_pkt || mac->txq_pkt)
-+ printk("Buffers lost in NPE: RX:%d, TX:%d\n",
-+ mac->rxq_pkt, mac->txq_pkt);
-+
-+ release_queue(mac->txq);
-+ release_queue(mac->rxq);
-+ release_queue(mac->rxdoneq);
-+
-+ flush_scheduled_work();
-+ return_npe_dev(mac->npe_dev);
-+
-+ iounmap(mac->addr);
-+ release_resource(mac->res);
-+ platform_set_drvdata(pdev, NULL);
-+ free_netdev(dev);
-+ return 0;
-+}
-+
-+static struct platform_driver ixp4xx_mac = {
-+ .driver.name = IXMAC_NAME,
-+ .probe = mac_probe,
-+ .remove = mac_remove,
-+};
-+
-+static int __init init_mac(void)
-+{
-+ /* The TX done Queue handles skbs sent out by the NPE */
-+ tx_doneq = request_queue(TX_DONE_QID, 128);
-+ if (IS_ERR(tx_doneq)) {
-+ printk(KERN_ERR "Error requesting Q: %d\n", TX_DONE_QID);
-+ return -EBUSY;
-+ }
-+ return platform_driver_register(&ixp4xx_mac);
-+}
-+
-+static void __exit finish_mac(void)
-+{
-+ platform_driver_unregister(&ixp4xx_mac);
-+ if (tx_doneq) {
-+ release_queue(tx_doneq);
-+ }
-+}
-+
-+module_init(init_mac);
-+module_exit(finish_mac);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
-+
-Index: linux-2.6.21.7/drivers/net/ixp4xx/npe.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/npe.c
-@@ -0,0 +1,291 @@
-+
-+#include <linux/ixp_npe.h>
-+#include <asm/hardware.h>
-+
-+#define RESET_NPE_PARITY 0x0800
-+#define PARITY_BIT_MASK 0x3F00FFFF
-+#define CONFIG_CTRL_REG_MASK 0x3F3FFFFF
-+#define MAX_RETRIES 1000000
-+#define NPE_PHYS_REG 32
-+#define RESET_MBST_VAL 0x0000F0F0
-+#define NPE_REGMAP 0x0000001E
-+#define INSTR_WR_REG_SHORT 0x0000C000
-+#define INSTR_WR_REG_BYTE 0x00004000
-+#define MASK_ECS_REG_0_NEXTPC 0x1FFF0000
-+
-+#define INSTR_RD_FIFO 0x0F888220
-+#define INSTR_RESET_MBOX 0x0FAC8210
-+
-+#define ECS_REG_0_LDUR 8
-+#define ECS_REG_1_CCTXT 16
-+#define ECS_REG_1_SELCTXT 0
-+
-+#define ECS_BG_CTXT_REG_0 0x00
-+#define ECS_BG_CTXT_REG_1 0x01
-+#define ECS_BG_CTXT_REG_2 0x02
-+#define ECS_PRI_1_CTXT_REG_0 0x04
-+#define ECS_PRI_1_CTXT_REG_1 0x05
-+#define ECS_PRI_1_CTXT_REG_2 0x06
-+#define ECS_PRI_2_CTXT_REG_0 0x08
-+#define ECS_PRI_2_CTXT_REG_1 0x09
-+#define ECS_PRI_2_CTXT_REG_2 0x0A
-+#define ECS_DBG_CTXT_REG_0 0x0C
-+#define ECS_DBG_CTXT_REG_1 0x0D
-+#define ECS_DBG_CTXT_REG_2 0x0E
-+#define ECS_INSTRUCT_REG 0x11
-+
-+#define ECS_BG_CTXT_REG_0_RESET 0xA0000000
-+#define ECS_BG_CTXT_REG_1_RESET 0x01000000
-+#define ECS_BG_CTXT_REG_2_RESET 0x00008000
-+#define ECS_PRI_1_CTXT_REG_0_RESET 0x20000080
-+#define ECS_PRI_1_CTXT_REG_1_RESET 0x01000000
-+#define ECS_PRI_1_CTXT_REG_2_RESET 0x00008000
-+#define ECS_PRI_2_CTXT_REG_0_RESET 0x20000080
-+#define ECS_PRI_2_CTXT_REG_1_RESET 0x01000000
-+#define ECS_PRI_2_CTXT_REG_2_RESET 0x00008000
-+#define ECS_DBG_CTXT_REG_0_RESET 0x20000000
-+#define ECS_DBG_CTXT_REG_1_RESET 0x00000000
-+#define ECS_DBG_CTXT_REG_2_RESET 0x001E0000
-+#define ECS_INSTRUCT_REG_RESET 0x1003C00F
-+
-+static struct { u32 reg; u32 val; } ecs_reset[] =
-+{
-+ { ECS_BG_CTXT_REG_0, ECS_BG_CTXT_REG_0_RESET },
-+ { ECS_BG_CTXT_REG_1, ECS_BG_CTXT_REG_1_RESET },
-+ { ECS_BG_CTXT_REG_2, ECS_BG_CTXT_REG_2_RESET },
-+ { ECS_PRI_1_CTXT_REG_0, ECS_PRI_1_CTXT_REG_0_RESET },
-+ { ECS_PRI_1_CTXT_REG_1, ECS_PRI_1_CTXT_REG_1_RESET },
-+ { ECS_PRI_1_CTXT_REG_2, ECS_PRI_1_CTXT_REG_2_RESET },
-+ { ECS_PRI_2_CTXT_REG_0, ECS_PRI_2_CTXT_REG_0_RESET },
-+ { ECS_PRI_2_CTXT_REG_1, ECS_PRI_2_CTXT_REG_1_RESET },
-+ { ECS_PRI_2_CTXT_REG_2, ECS_PRI_2_CTXT_REG_2_RESET },
-+ { ECS_DBG_CTXT_REG_0, ECS_DBG_CTXT_REG_0_RESET },
-+ { ECS_DBG_CTXT_REG_1, ECS_DBG_CTXT_REG_1_RESET },
-+ { ECS_DBG_CTXT_REG_2, ECS_DBG_CTXT_REG_2_RESET },
-+ { ECS_INSTRUCT_REG, ECS_INSTRUCT_REG_RESET }
-+};
-+
-+/* actually I have no idea what I'm doing here !!
-+ * I only rewrite the "reset" sequence the way Intel does it.
-+ */
-+
-+static void npe_debg_preexec(struct npe_info *npe)
-+{
-+ u32 r = IX_NPEDL_MASK_ECS_DBG_REG_2_IF | IX_NPEDL_MASK_ECS_DBG_REG_2_IE;
-+
-+ npe->exec_count = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCT);
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, 0);
-+ npe->ctx_reg2 = npe_read_ecs_reg(npe, ECS_DBG_CTXT_REG_2);
-+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2 | r);
-+}
-+
-+static void npe_debg_postexec(struct npe_info *npe)
-+{
-+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0, 0);
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, npe->exec_count);
-+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2);
-+}
-+
-+static int
-+npe_debg_inst_exec(struct npe_info *npe, u32 instr, u32 ctx, u32 ldur)
-+{
-+ u32 regval, wc;
-+ int c = 0;
-+
-+ regval = IX_NPEDL_MASK_ECS_REG_0_ACTIVE |
-+ (ldur << ECS_REG_0_LDUR);
-+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0 , regval);
-+ /* set CCTXT at ECS DEBUG L3 to specify in which context
-+ * to execute the instruction
-+ */
-+ regval = (ctx << ECS_REG_1_CCTXT) |
-+ (ctx << ECS_REG_1_SELCTXT);
-+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_1, regval);
-+
-+ /* clear the pipeline */
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
-+
-+ /* load NPE instruction into the instruction register */
-+ npe_write_ecs_reg(npe, ECS_INSTRUCT_REG, instr);
-+ /* we need this value later to wait for
-+ * completion of NPE execution step
-+ */
-+ wc = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC);
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STEP);
-+
-+ /* Watch Count register increments when NPE completes an instruction */
-+ while (wc == npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC) &&
-+ ++c < MAX_RETRIES);
-+
-+ if (c >= MAX_RETRIES) {
-+ printk(KERN_ERR "%s reset:npe_debg_inst_exec(): Timeout\n",
-+ npe->plat->name);
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static int npe_logical_reg_write8(struct npe_info *npe, u32 addr, u32 val)
-+{
-+ u32 instr;
-+ val &= 0xff;
-+ /* here we build the NPE assembler instruction:
-+ * mov8 d0, #0 */
-+ instr = INSTR_WR_REG_BYTE | /* OpCode */
-+ addr << 9 | /* base Operand */
-+ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */
-+ (val & ~0x1f) << (18-5);/* higher 3 bits to CoProc instr. */
-+ /* and execute it */
-+ return npe_debg_inst_exec(npe, instr, 0, 1);
-+}
-+
-+static int npe_logical_reg_write16(struct npe_info *npe, u32 addr, u32 val)
-+{
-+ u32 instr;
-+ /* here we build the NPE assembler instruction:
-+ * mov16 d0, #0 */
-+ val &= 0xffff;
-+ instr = INSTR_WR_REG_SHORT | /* OpCode */
-+ addr << 9 | /* base Operand */
-+ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */
-+ (val & ~0x1f) << (18-5);/* higher 11 bits to CoProc instr. */
-+ /* and execute it */
-+ return npe_debg_inst_exec(npe, instr, 0, 1);
-+}
-+
-+static int npe_logical_reg_write32(struct npe_info *npe, u32 addr, u32 val)
-+{
-+ /* write in 16 bit steps first the high and then the low value */
-+ npe_logical_reg_write16(npe, addr, val >> 16);
-+ return npe_logical_reg_write16(npe, addr+2, val & 0xffff);
-+}
-+
-+void npe_reset(struct npe_info *npe)
-+{
-+ u32 reg, cfg_ctrl;
-+ int i;
-+ struct { u32 reset; int addr; int size; } ctx_reg[] = {
-+ { 0x80, 0x1b, 8 },
-+ { 0, 0x1c, 16 },
-+ { 0x820, 0x1e, 16 },
-+ { 0, 0x1f, 8 }
-+ }, *cr;
-+
-+ cfg_ctrl = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL);
-+ cfg_ctrl |= 0x3F000000;
-+ /* disable the parity interrupt */
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, cfg_ctrl & PARITY_BIT_MASK);
-+
-+ npe_debg_preexec(npe);
-+
-+ /* clear the FIFOs */
-+ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WFIFO) ==
-+ IX_NPEDL_MASK_WFIFO_VALID);
-+ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) ==
-+ IX_NPEDL_MASK_STAT_OFNE)
-+ {
-+ u32 reg;
-+ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_FIFO);
-+ printk("%s reset: Read FIFO:=%x\n", npe->plat->name, reg);
-+ }
-+ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) ==
-+ IX_NPEDL_MASK_STAT_IFNE) {
-+ npe_debg_inst_exec(npe, INSTR_RD_FIFO, 0, 0);
-+ }
-+
-+ /* Reset the mailbox reg */
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_MBST, RESET_MBST_VAL);
-+ npe_debg_inst_exec(npe, INSTR_RESET_MBOX, 0, 0);
-+
-+ /* Reset the physical registers in the NPE register file */
-+ for (i=0; i<NPE_PHYS_REG; i++) {
-+ npe_logical_reg_write16(npe, NPE_REGMAP, i >> 1);
-+ npe_logical_reg_write32(npe, (i&1) *4, 0);
-+ }
-+
-+ /* Reset the context store. Iterate over the 16 ctx s */
-+ for(i=0; i<16; i++) {
-+ for (reg=0; reg<4; reg++) {
-+ /* There is no (STEVT) register for Context 0.
-+ * ignore if register=0 and ctx=0 */
-+ if (!(reg || i))
-+ continue;
-+ /* Context 0 has no STARTPC. Instead, this value is
-+ * used to set NextPC for Background ECS,
-+ * to set where NPE starts executing code
-+ */
-+ if (!i && reg==1) {
-+ u32 r;
-+ r = npe_read_ecs_reg(npe, ECS_BG_CTXT_REG_0);
-+ r &= ~MASK_ECS_REG_0_NEXTPC;
-+ r |= (cr->reset << 16) & MASK_ECS_REG_0_NEXTPC;
-+ continue;
-+ }
-+ cr = ctx_reg + reg;
-+ switch (cr->size) {
-+ case 8:
-+ npe_logical_reg_write8(npe, cr->addr,
-+ cr->reset);
-+ break;
-+ case 16:
-+ npe_logical_reg_write16(npe, cr->addr,
-+ cr->reset);
-+ }
-+ }
-+ }
-+ npe_debg_postexec(npe);
-+
-+ for (i=0; i< ARRAY_SIZE(ecs_reset); i++) {
-+ npe_write_ecs_reg(npe, ecs_reset[i].reg, ecs_reset[i].val);
-+ }
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT);
-+
-+ for (i=IX_NPEDL_REG_OFFSET_EXCT; i<=IX_NPEDL_REG_OFFSET_AP3; i+=4) {
-+ npe_reg_write(npe, i, 0);
-+ }
-+
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_WC, 0);
-+
-+ reg = *IXP4XX_EXP_CFG2;
-+ reg |= 0x800 << npe->plat->id; /* IX_FUSE_NPE[ABC] */
-+ *IXP4XX_EXP_CFG2 = reg;
-+ reg &= ~(0x800 << npe->plat->id); /* IX_FUSE_NPE[ABC] */
-+ *IXP4XX_EXP_CFG2 = reg;
-+
-+ npe_stop(npe);
-+
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL,
-+ cfg_ctrl & CONFIG_CTRL_REG_MASK);
-+ npe->loaded = 0;
-+}
-+
-+
-+void npe_stop(struct npe_info *npe)
-+{
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STOP);
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
-+}
-+
-+static void npe_reset_active(struct npe_info *npe, u32 reg)
-+{
-+ u32 regval;
-+
-+ regval = npe_read_ecs_reg(npe, reg);
-+ regval &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE;
-+ npe_write_ecs_reg(npe, reg, regval);
-+}
-+
-+void npe_start(struct npe_info *npe)
-+{
-+ npe_reset_active(npe, IX_NPEDL_ECS_PRI_1_CTXT_REG_0);
-+ npe_reset_active(npe, IX_NPEDL_ECS_PRI_2_CTXT_REG_0);
-+ npe_reset_active(npe, IX_NPEDL_ECS_DBG_CTXT_REG_0);
-+
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
-+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_START);
-+}
-+
-+EXPORT_SYMBOL(npe_stop);
-+EXPORT_SYMBOL(npe_start);
-+EXPORT_SYMBOL(npe_reset);
-Index: linux-2.6.21.7/drivers/net/ixp4xx/npe_mh.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/npe_mh.c
-@@ -0,0 +1,170 @@
-+/*
-+ * npe_mh.c - NPE message handler.
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/ixp_npe.h>
-+#include <linux/slab.h>
-+
-+#define MAX_RETRY 200
-+
-+struct npe_mh_msg {
-+ union {
-+ u8 byte[8]; /* Very desciptive name, I know ... */
-+ u32 data[2];
-+ } u;
-+};
-+
-+/*
-+ * The whole code in this function must be reworked.
-+ * It is in a state that works but is not rock solid
-+ */
-+static int send_message(struct npe_info *npe, struct npe_mh_msg *msg)
-+{
-+ int i,j;
-+ u32 send[2], recv[2];
-+
-+ for (i=0; i<2; i++)
-+ send[i] = be32_to_cpu(msg->u.data[i]);
-+
-+ if ((npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
-+ IX_NPEMH_NPE_STAT_IFNE))
-+ return -1;
-+
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[0]);
-+ for(i=0; i<MAX_RETRY; i++) {
-+ /* if the IFNF status bit is unset then the inFIFO is full */
-+ if (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
-+ IX_NPEMH_NPE_STAT_IFNF)
-+ break;
-+ }
-+ if (i>=MAX_RETRY)
-+ return -1;
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[1]);
-+ i=0;
-+ while (!(npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
-+ IX_NPEMH_NPE_STAT_OFNE)) {
-+ if (i++>MAX_RETRY) {
-+ printk("Waiting for Output FIFO NotEmpty failed\n");
-+ return -1;
-+ }
-+ }
-+ //printk("Output FIFO Not Empty. Loops: %d\n", i);
-+ j=0;
-+ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
-+ IX_NPEMH_NPE_STAT_OFNE) {
-+ recv[j&1] = npe_reg_read(npe,IX_NPEDL_REG_OFFSET_FIFO);
-+ j++;
-+ }
-+ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
-+ if (send[0] || send[1]) {
-+ /* all CMDs return the complete message as answer,
-+ * only GETSTATUS returns the ImageID of the NPE
-+ */
-+ printk("Unexpected answer: "
-+ "Send %08x:%08x Ret %08x:%08x\n",
-+ send[0], send[1], recv[0], recv[1]);
-+ }
-+ }
-+ return 0;
-+}
-+
-+#define CMD 0
-+#define PORT 1
-+#define MAC 2
-+
-+#define IX_ETHNPE_NPE_GETSTATUS 0x00
-+#define IX_ETHNPE_EDB_SETPORTADDRESS 0x01
-+#define IX_ETHNPE_GETSTATS 0x04
-+#define IX_ETHNPE_RESETSTATS 0x05
-+#define IX_ETHNPE_FW_SETFIREWALLMODE 0x0E
-+#define IX_ETHNPE_VLAN_SETRXQOSENTRY 0x0B
-+#define IX_ETHNPE_SETLOOPBACK_MODE 0x12
-+
-+#define logical_id(mp) (((mp)->npe_id << 4) | ((mp)->port_id & 0xf))
-+
-+int npe_mh_status(struct npe_info *npe)
-+{
-+ struct npe_mh_msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.u.byte[CMD] = IX_ETHNPE_NPE_GETSTATUS;
-+ return send_message(npe, &msg);
-+}
-+
-+int npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp,
-+ u8 *macaddr)
-+{
-+ struct npe_mh_msg msg;
-+
-+ msg.u.byte[CMD] = IX_ETHNPE_EDB_SETPORTADDRESS;
-+ msg.u.byte[PORT] = mp->eth_id;
-+ memcpy(msg.u.byte + MAC, macaddr, 6);
-+
-+ return send_message(npe, &msg);
-+}
-+
-+int npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp)
-+{
-+ struct npe_mh_msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.u.byte[CMD] = IX_ETHNPE_FW_SETFIREWALLMODE;
-+ msg.u.byte[PORT] = logical_id(mp);
-+
-+ return send_message(npe, &msg);
-+}
-+
-+int npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp,
-+ int enable)
-+{
-+ struct npe_mh_msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.u.byte[CMD] = IX_ETHNPE_SETLOOPBACK_MODE;
-+ msg.u.byte[PORT] = logical_id(mp);
-+ msg.u.byte[3] = enable ? 1 : 0;
-+
-+ return send_message(npe, &msg);
-+}
-+
-+int npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid)
-+{
-+ struct npe_mh_msg msg;
-+ int i, ret;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.u.byte[CMD] = IX_ETHNPE_VLAN_SETRXQOSENTRY;
-+ msg.u.byte[PORT] = logical_id(mp);
-+ msg.u.byte[5] = qid | 0x80;
-+ msg.u.byte[7] = qid<<4;
-+ for(i=0; i<8; i++) {
-+ msg.u.byte[3] = i;
-+ if ((ret = send_message(npe, &msg)))
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+int npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys,
-+ int reset)
-+{
-+ struct npe_mh_msg msg;
-+ memset(&msg, 0, sizeof(msg));
-+ msg.u.byte[CMD] = reset ? IX_ETHNPE_RESETSTATS : IX_ETHNPE_GETSTATS;
-+ msg.u.byte[PORT] = logical_id(mp);
-+ msg.u.data[1] = cpu_to_npe32(cpu_to_be32(phys));
-+
-+ return send_message(npe, &msg);
-+}
-+
-+
-+EXPORT_SYMBOL(npe_mh_status);
-+EXPORT_SYMBOL(npe_mh_setportaddr);
-+EXPORT_SYMBOL(npe_mh_disable_firewall);
-+EXPORT_SYMBOL(npe_mh_set_rxqid);
-+EXPORT_SYMBOL(npe_mh_npe_loopback_mode);
-+EXPORT_SYMBOL(npe_mh_get_stats);
-Index: linux-2.6.21.7/drivers/net/ixp4xx/phy.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/phy.c
-@@ -0,0 +1,113 @@
-+/*
-+ * phy.c - MDIO functions and mii initialisation
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+
-+#include <linux/mutex.h>
-+#include "mac.h"
-+
-+#define MAX_PHYS (1<<5)
-+
-+/*
-+ * We must always use the same MAC for acessing the MDIO
-+ * We may not use each MAC for its PHY :-(
-+ */
-+
-+static struct net_device *phy_dev = NULL;
-+static struct mutex mtx;
-+
-+/* here we remember if the PHY is alive, to avoid log dumping */
-+static int phy_works[MAX_PHYS];
-+
-+int mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg)
-+{
-+ struct mac_info *mac;
-+ u32 cmd, reg;
-+ int cnt = 0;
-+
-+ if (!phy_dev)
-+ return 0;
-+
-+ mac = netdev_priv(phy_dev);
-+ cmd = mdio_cmd(phy_addr, phy_reg);
-+ mutex_lock_interruptible(&mtx);
-+ mac_mdio_cmd_write(mac, cmd);
-+ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) {
-+ if (++cnt >= 100) {
-+ printk("%s: PHY[%d] access failed\n",
-+ dev->name, phy_addr);
-+ break;
-+ }
-+ schedule();
-+ }
-+ reg = mac_mdio_status_read(mac);
-+ mutex_unlock(&mtx);
-+ if (reg & MII_READ_FAIL) {
-+ if (phy_works[phy_addr]) {
-+ printk("%s: PHY[%d] unresponsive\n",
-+ dev->name, phy_addr);
-+ }
-+ reg = 0;
-+ phy_works[phy_addr] = 0;
-+ } else {
-+ if ( !phy_works[phy_addr]) {
-+ printk("%s: PHY[%d] responsive again\n",
-+ dev->name, phy_addr);
-+ }
-+ phy_works[phy_addr] = 1;
-+ }
-+ return reg & 0xffff;
-+}
-+
-+void
-+mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val)
-+{
-+ struct mac_info *mac;
-+ u32 cmd;
-+ int cnt=0;
-+
-+ if (!phy_dev)
-+ return;
-+
-+ mac = netdev_priv(phy_dev);
-+ cmd = mdio_cmd(phy_addr, phy_reg) | MII_WRITE | val;
-+
-+ mutex_lock_interruptible(&mtx);
-+ mac_mdio_cmd_write(mac, cmd);
-+ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) {
-+ if (++cnt >= 100) {
-+ printk("%s: PHY[%d] access failed\n",
-+ dev->name, phy_addr);
-+ break;
-+ }
-+ schedule();
-+ }
-+ mutex_unlock(&mtx);
-+}
-+
-+void init_mdio(struct net_device *dev, int phy_id)
-+{
-+ struct mac_info *mac = netdev_priv(dev);
-+ int i;
-+
-+ /* All phy operations should use the same MAC
-+ * (my experience)
-+ */
-+ if (mac->plat->eth_id == 0) {
-+ mutex_init(&mtx);
-+ phy_dev = dev;
-+ for (i=0; i<MAX_PHYS; i++)
-+ phy_works[i] = 1;
-+ }
-+ mac->mii.dev = dev;
-+ mac->mii.phy_id = phy_id;
-+ mac->mii.phy_id_mask = MAX_PHYS - 1;
-+ mac->mii.reg_num_mask = 0x1f;
-+ mac->mii.mdio_read = mdio_read_register;
-+ mac->mii.mdio_write = mdio_write_register;
-+}
-+
-Index: linux-2.6.21.7/drivers/net/ixp4xx/ucode_dl.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/ucode_dl.c
-@@ -0,0 +1,479 @@
-+/*
-+ * ucode_dl.c - provide an NPE device and a char-dev for microcode download
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/miscdevice.h>
-+#include <linux/platform_device.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/firmware.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/byteorder/swab.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+
-+#include <linux/ixp_npe.h>
-+
-+#define IXNPE_VERSION "IXP4XX NPE driver Version 0.3.0"
-+
-+#define DL_MAGIC 0xfeedf00d
-+#define DL_MAGIC_SWAP 0x0df0edfe
-+
-+#define EOF_BLOCK 0xf
-+#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
-+ sizeof(struct dl_image))
-+
-+#define BT_INSTR 0
-+#define BT_DATA 1
-+
-+enum blk_type {
-+ instruction,
-+ data,
-+};
-+
-+struct dl_block {
-+ u32 type;
-+ u32 offset;
-+};
-+
-+struct dl_image {
-+ u32 magic;
-+ u32 id;
-+ u32 size;
-+ union {
-+ u32 data[0];
-+ struct dl_block block[0];
-+ } u;
-+};
-+
-+struct dl_codeblock {
-+ u32 npe_addr;
-+ u32 size;
-+ u32 data[0];
-+};
-+
-+static struct platform_driver ixp4xx_npe_driver;
-+
-+static int match_by_npeid(struct device *dev, void *id)
-+{
-+ struct npe_info *npe = dev_get_drvdata(dev);
-+ if (!npe->plat)
-+ return 0;
-+ return (npe->plat->id == *(int*)id);
-+}
-+
-+struct device *get_npe_by_id(int id)
-+{
-+ struct device *dev = driver_find_device(&ixp4xx_npe_driver.driver,
-+ NULL, &id, match_by_npeid);
-+ if (dev) {
-+ struct npe_info *npe = dev_get_drvdata(dev);
-+ if (!try_module_get(THIS_MODULE)) {
-+ put_device(dev);
-+ return NULL;
-+ }
-+ npe->usage++;
-+ }
-+ return dev;
-+}
-+
-+void return_npe_dev(struct device *dev)
-+{
-+ struct npe_info *npe = dev_get_drvdata(dev);
-+ put_device(dev);
-+ module_put(THIS_MODULE);
-+ npe->usage--;
-+}
-+
-+static int
-+download_block(struct npe_info *npe, struct dl_codeblock *cb, unsigned type)
-+{
-+ int i;
-+ int cmd;
-+
-+ switch (type) {
-+ case BT_DATA:
-+ cmd = IX_NPEDL_EXCTL_CMD_WR_DATA_MEM;
-+ if (cb->npe_addr + cb->size > npe->plat->data_size) {
-+ printk(KERN_INFO "Data size too large: %d+%d > %d\n",
-+ cb->npe_addr, cb->size, npe->plat->data_size);
-+ return -EIO;
-+ }
-+ break;
-+ case BT_INSTR:
-+ cmd = IX_NPEDL_EXCTL_CMD_WR_INS_MEM;
-+ if (cb->npe_addr + cb->size > npe->plat->inst_size) {
-+ printk(KERN_INFO "Instr size too large: %d+%d > %d\n",
-+ cb->npe_addr, cb->size, npe->plat->inst_size);
-+ return -EIO;
-+ }
-+ break;
-+ default:
-+ printk(KERN_INFO "Unknown CMD: %d\n", type);
-+ return -EIO;
-+ }
-+
-+ for (i=0; i < cb->size; i++) {
-+ npe_write_cmd(npe, cb->npe_addr + i, cb->data[i], cmd);
-+ }
-+
-+ return 0;
-+}
-+
-+static int store_npe_image(struct dl_image *image, struct device *dev)
-+{
-+ struct dl_block *blk;
-+ struct dl_codeblock *cb;
-+ struct npe_info *npe;
-+ int ret=0;
-+
-+ if (!dev) {
-+ dev = get_npe_by_id( (image->id >> 24) & 0xf);
-+ return_npe_dev(dev);
-+ }
-+ if (!dev)
-+ return -ENODEV;
-+
-+ npe = dev_get_drvdata(dev);
-+ if (npe->loaded && (npe->usage > 0)) {
-+ printk(KERN_INFO "Cowardly refusing to reload an Image "
-+ "into the used and running %s\n", npe->plat->name);
-+ return 0; /* indicate success anyway... */
-+ }
-+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xf)) {
-+ printk(KERN_INFO "IXP46x NPE image ignored on IXP42x\n");
-+ return -EIO;
-+ }
-+
-+ npe_stop(npe);
-+ npe_reset(npe);
-+
-+ for (blk = image->u.block; blk->type != EOF_BLOCK; blk++) {
-+ if (blk->offset > image->size) {
-+ printk(KERN_INFO "Block offset out of range\n");
-+ return -EIO;
-+ }
-+ cb = (struct dl_codeblock*)&image->u.data[blk->offset];
-+ if (blk->offset + cb->size + 2 > image->size) {
-+ printk(KERN_INFO "Codeblock size out of range\n");
-+ return -EIO;
-+ }
-+ if ((ret = download_block(npe, cb, blk->type)))
-+ return ret;
-+ }
-+ *(u32*)npe->img_info = cpu_to_be32(image->id);
-+ npe_start(npe);
-+
-+ printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n",
-+ npe->plat->name, npe->img_info[1], npe->img_info[2],
-+ npe->img_info[3], npe_status(npe));
-+ if (npe_mh_status(npe)) {
-+ printk(KERN_ERR "%s not responding\n", npe->plat->name);
-+ }
-+ npe->loaded = 1;
-+ return 0;
-+}
-+
-+static int ucode_open(struct inode *inode, struct file *file)
-+{
-+ file->private_data = kmalloc(sizeof(struct dl_image), GFP_KERNEL);
-+ if (!file->private_data)
-+ return -ENOMEM;
-+ return 0;
-+}
-+
-+static int ucode_close(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static ssize_t ucode_write(struct file *file, const char __user *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ union {
-+ char *data;
-+ struct dl_image *image;
-+ } u;
-+ const char __user *cbuf = buf;
-+
-+ u.data = file->private_data;
-+
-+ while (count) {
-+ int len;
-+ if (*ppos < sizeof(struct dl_image)) {
-+ len = sizeof(struct dl_image) - *ppos;
-+ len = len > count ? count : len;
-+ if (copy_from_user(u.data + *ppos, cbuf, len))
-+ return -EFAULT;
-+ count -= len;
-+ *ppos += len;
-+ cbuf += len;
-+ continue;
-+ } else if (*ppos == sizeof(struct dl_image)) {
-+ void *data;
-+ if (u.image->magic == DL_MAGIC_SWAP) {
-+ printk(KERN_INFO "swapped image found\n");
-+ u.image->id = swab32(u.image->id);
-+ u.image->size = swab32(u.image->size);
-+ } else if (u.image->magic != DL_MAGIC) {
-+ printk(KERN_INFO "Bad magic:%x\n",
-+ u.image->magic);
-+ return -EFAULT;
-+ }
-+ len = IMG_SIZE(u.image);
-+ data = kmalloc(len, GFP_KERNEL);
-+ if (!data)
-+ return -ENOMEM;
-+ memcpy(data, u.data, *ppos);
-+ kfree(u.data);
-+ u.data = (char*)data;
-+ file->private_data = data;
-+ }
-+ len = IMG_SIZE(u.image) - *ppos;
-+ len = len > count ? count : len;
-+ if (copy_from_user(u.data + *ppos, cbuf, len))
-+ return -EFAULT;
-+ count -= len;
-+ *ppos += len;
-+ cbuf += len;
-+ if (*ppos == IMG_SIZE(u.image)) {
-+ int ret, i;
-+ *ppos = 0;
-+ if (u.image->magic == DL_MAGIC_SWAP) {
-+ for (i=0; i<u.image->size; i++) {
-+ u.image->u.data[i] =
-+ swab32(u.image->u.data[i]);
-+ }
-+ u.image->magic = swab32(u.image->magic);
-+ }
-+ ret = store_npe_image(u.image, NULL);
-+ if (ret) {
-+ printk(KERN_INFO "Error in NPE image: %x\n",
-+ u.image->id);
-+ return ret;
-+ }
-+ }
-+ }
-+ return (cbuf-buf);
-+}
-+
-+static void npe_firmware_probe(struct device *dev)
-+{
-+#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \
-+ && defined(MODULE)
-+ const struct firmware *fw_entry;
-+ struct npe_info *npe = dev_get_drvdata(dev);
-+ struct dl_image *image;
-+ int ret = -1, i;
-+
-+ if (request_firmware(&fw_entry, npe->plat->name, dev) != 0) {
-+ return;
-+ }
-+ image = (struct dl_image*)fw_entry->data;
-+ /* Sanity checks */
-+ if (fw_entry->size < sizeof(struct dl_image)) {
-+ printk(KERN_ERR "Firmware error: too small\n");
-+ goto out;
-+ }
-+ if (image->magic == DL_MAGIC_SWAP) {
-+ printk(KERN_INFO "swapped image found\n");
-+ image->id = swab32(image->id);
-+ image->size = swab32(image->size);
-+ } else if (image->magic != DL_MAGIC) {
-+ printk(KERN_ERR "Bad magic:%x\n", image->magic);
-+ goto out;
-+ }
-+ if (IMG_SIZE(image) != fw_entry->size) {
-+ printk(KERN_ERR "Firmware error: bad size\n");
-+ goto out;
-+ }
-+ if (((image->id >> 24) & 0xf) != npe->plat->id) {
-+ printk(KERN_ERR "NPE id missmatch\n");
-+ goto out;
-+ }
-+ if (image->magic == DL_MAGIC_SWAP) {
-+ for (i=0; i<image->size; i++) {
-+ image->u.data[i] = swab32(image->u.data[i]);
-+ }
-+ image->magic = swab32(image->magic);
-+ }
-+
-+ ret = store_npe_image(image, dev);
-+out:
-+ if (ret) {
-+ printk(KERN_ERR "Error downloading Firmware for %s\n",
-+ npe->plat->name);
-+ }
-+ release_firmware(fw_entry);
-+#endif
-+}
-+
-+static void disable_npe_irq(struct npe_info *npe)
-+{
-+ u32 reg;
-+ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL);
-+ reg &= ~(IX_NPEMH_NPE_CTL_OFE | IX_NPEMH_NPE_CTL_IFE);
-+ reg |= IX_NPEMH_NPE_CTL_OFEWE | IX_NPEMH_NPE_CTL_IFEWE;
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, reg);
-+}
-+
-+static ssize_t show_npe_state(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct npe_info *npe = dev_get_drvdata(dev);
-+
-+ strcpy(buf, npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN ?
-+ "start\n" : "stop\n");
-+ return strlen(buf);
-+}
-+
-+static ssize_t set_npe_state(struct device *dev, struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct npe_info *npe = dev_get_drvdata(dev);
-+
-+ if (npe->usage) {
-+ printk("%s in use: read-only\n", npe->plat->name);
-+ return count;
-+ }
-+ if (!strncmp(buf, "start", 5)) {
-+ npe_start(npe);
-+ }
-+ if (!strncmp(buf, "stop", 4)) {
-+ npe_stop(npe);
-+ }
-+ if (!strncmp(buf, "reset", 5)) {
-+ npe_stop(npe);
-+ npe_reset(npe);
-+ }
-+ return count;
-+}
-+
-+static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, show_npe_state, set_npe_state);
-+
-+static int npe_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct npe_info *npe;
-+ struct npe_plat_data *plat = pdev->dev.platform_data;
-+ int err, size, ret=0;
-+
-+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
-+ return -EIO;
-+
-+ if (!(npe = kzalloc(sizeof(struct npe_info), GFP_KERNEL)))
-+ return -ENOMEM;
-+
-+ size = res->end - res->start +1;
-+ npe->res = request_mem_region(res->start, size, plat->name);
-+ if (!npe->res) {
-+ ret = -EBUSY;
-+ printk(KERN_ERR "Failed to get memregion(%x, %x)\n",
-+ res->start, size);
-+ goto out_free;
-+ }
-+
-+ npe->addr = ioremap(res->start, size);
-+ if (!npe->addr) {
-+ ret = -ENOMEM;
-+ printk(KERN_ERR "Failed to ioremap(%x, %x)\n",
-+ res->start, size);
-+ goto out_rel;
-+ }
-+
-+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
-+
-+ platform_set_drvdata(pdev, npe);
-+
-+ err = device_create_file(&pdev->dev, &dev_attr_state);
-+ if (err)
-+ goto out_rel;
-+
-+ npe->plat = plat;
-+ disable_npe_irq(npe);
-+ npe->usage = 0;
-+ npe_reset(npe);
-+ npe_firmware_probe(&pdev->dev);
-+
-+ return 0;
-+
-+out_rel:
-+ release_resource(npe->res);
-+out_free:
-+ kfree(npe);
-+ return ret;
-+}
-+
-+static struct file_operations ucode_dl_fops = {
-+ .owner = THIS_MODULE,
-+ .write = ucode_write,
-+ .open = ucode_open,
-+ .release = ucode_close,
-+};
-+
-+static struct miscdevice ucode_dl_dev = {
-+ .minor = MICROCODE_MINOR,
-+ .name = "ixp4xx_ucode",
-+ .fops = &ucode_dl_fops,
-+};
-+
-+static int npe_remove(struct platform_device *pdev)
-+{
-+ struct npe_info *npe = platform_get_drvdata(pdev);
-+
-+ device_remove_file(&pdev->dev, &dev_attr_state);
-+
-+ iounmap(npe->addr);
-+ release_resource(npe->res);
-+ kfree(npe);
-+ return 0;
-+}
-+
-+static struct platform_driver ixp4xx_npe_driver = {
-+ .driver = {
-+ .name = "ixp4xx_npe",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = npe_probe,
-+ .remove = npe_remove,
-+};
-+
-+static int __init init_npedriver(void)
-+{
-+ int ret;
-+ if ((ret = misc_register(&ucode_dl_dev))){
-+ printk(KERN_ERR "Failed to register misc device %d\n",
-+ MICROCODE_MINOR);
-+ return ret;
-+ }
-+ if ((ret = platform_driver_register(&ixp4xx_npe_driver)))
-+ misc_deregister(&ucode_dl_dev);
-+ else
-+ printk(KERN_INFO IXNPE_VERSION " initialized\n");
-+
-+ return ret;
-+
-+}
-+
-+static void __exit finish_npedriver(void)
-+{
-+ misc_deregister(&ucode_dl_dev);
-+ platform_driver_unregister(&ixp4xx_npe_driver);
-+}
-+
-+module_init(init_npedriver);
-+module_exit(finish_npedriver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
-+
-+EXPORT_SYMBOL(get_npe_by_id);
-+EXPORT_SYMBOL(return_npe_dev);
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-@@ -22,6 +22,8 @@
- #ifndef _ASM_ARM_IXP4XX_H_
- #define _ASM_ARM_IXP4XX_H_
-
-+#include "npe_regs.h"
-+
- /*
- * IXP4xx Linux Memory Map:
- *
-@@ -44,6 +46,12 @@
- */
-
- /*
-+ * PCI Memory Space
-+ */
-+#define IXP4XX_PCIMEM_BASE_PHYS (0x48000000)
-+#define IXP4XX_PCIMEM_REGION_SIZE (0x04000000)
-+#define IXP4XX_PCIMEM_BAR_SIZE (0x01000000)
-+/*
- * Queue Manager
- */
- #define IXP4XX_QMGR_BASE_PHYS (0x60000000)
-@@ -322,7 +330,13 @@
- #define PCI_ATPDMA0_LENADDR_OFFSET 0x48
- #define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
- #define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
--#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
-+#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
-+#define PCI_PTADMA0_AHBADDR_OFFSET 0x58
-+#define PCI_PTADMA0_PCIADDR_OFFSET 0x5c
-+#define PCI_PTADMA0_LENADDR_OFFSET 0x60
-+#define PCI_PTADMA1_AHBADDR_OFFSET 0x64
-+#define PCI_PTADMA1_PCIADDR_OFFSET 0x68
-+#define PCI_PTADMA1_LENADDR_OFFSET 0x6c
-
- /*
- * PCI Control/Status Registers
-@@ -351,6 +365,12 @@
- #define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
- #define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
- #define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-+#define PCI_PTADMA0_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA0_AHBADDR_OFFSET)
-+#define PCI_PTADMA0_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA0_PCIADDR_OFFSET)
-+#define PCI_PTADMA0_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA0_LENADDR_OFFSET)
-+#define PCI_PTADMA1_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA1_AHBADDR_OFFSET)
-+#define PCI_PTADMA1_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA1_PCIADDR_OFFSET)
-+#define PCI_PTADMA1_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA1_LENADDR_OFFSET)
-
- /*
- * PCI register values and bit definitions
-@@ -607,6 +627,34 @@
-
- #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-+
-+/* Fuse Bits of IXP_EXP_CFG2 */
-+#define IX_FUSE_RCOMP (1 << 0)
-+#define IX_FUSE_USB (1 << 1)
-+#define IX_FUSE_HASH (1 << 2)
-+#define IX_FUSE_AES (1 << 3)
-+#define IX_FUSE_DES (1 << 4)
-+#define IX_FUSE_HDLC (1 << 5)
-+#define IX_FUSE_AAL (1 << 6)
-+#define IX_FUSE_HSS (1 << 7)
-+#define IX_FUSE_UTOPIA (1 << 8)
-+#define IX_FUSE_ETH0 (1 << 9)
-+#define IX_FUSE_ETH1 (1 << 10)
-+#define IX_FUSE_NPEA (1 << 11)
-+#define IX_FUSE_NPEB (1 << 12)
-+#define IX_FUSE_NPEC (1 << 13)
-+#define IX_FUSE_PCI (1 << 14)
-+#define IX_FUSE_ECC (1 << 15)
-+#define IX_FUSE_UTOPIA_PHY_LIMIT (3 << 16)
-+#define IX_FUSE_USB_HOST (1 << 18)
-+#define IX_FUSE_NPEA_ETH (1 << 19)
-+#define IX_FUSE_NPEB_ETH (1 << 20)
-+#define IX_FUSE_RSA (1 << 21)
-+#define IX_FUSE_XSCALE_MAX_FREQ (3 << 22)
-+
-+#define IX_FUSE_IXP46X_ONLY IX_FUSE_XSCALE_MAX_FREQ | IX_FUSE_RSA | \
-+ IX_FUSE_NPEB_ETH | IX_FUSE_NPEA_ETH | IX_FUSE_USB_HOST | IX_FUSE_ECC
-+
- #ifndef __ASSEMBLY__
- static inline int cpu_is_ixp46x(void)
- {
-@@ -620,6 +668,15 @@ static inline int cpu_is_ixp46x(void)
- #endif
- return 0;
- }
-+
-+static inline u32 ix_fuse(void)
-+{
-+ unsigned int fuses = ~(*IXP4XX_EXP_CFG2);
-+ if (!cpu_is_ixp46x())
-+ fuses &= ~IX_FUSE_IXP46X_ONLY;
-+
-+ return fuses;
-+}
- #endif
-
- #endif
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/npe_regs.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/npe_regs.h
-@@ -0,0 +1,82 @@
-+#ifndef NPE_REGS_H
-+#define NPE_REGS_H
-+
-+/* Execution Address */
-+#define IX_NPEDL_REG_OFFSET_EXAD 0x00
-+/* Execution Data */
-+#define IX_NPEDL_REG_OFFSET_EXDATA 0x04
-+/* Execution Control */
-+#define IX_NPEDL_REG_OFFSET_EXCTL 0x08
-+/* Execution Count */
-+#define IX_NPEDL_REG_OFFSET_EXCT 0x0C
-+/* Action Point 0 */
-+#define IX_NPEDL_REG_OFFSET_AP0 0x10
-+/* Action Point 1 */
-+#define IX_NPEDL_REG_OFFSET_AP1 0x14
-+/* Action Point 2 */
-+#define IX_NPEDL_REG_OFFSET_AP2 0x18
-+/* Action Point 3 */
-+#define IX_NPEDL_REG_OFFSET_AP3 0x1C
-+/* Watchpoint FIFO */
-+#define IX_NPEDL_REG_OFFSET_WFIFO 0x20
-+/* Watch Count */
-+#define IX_NPEDL_REG_OFFSET_WC 0x24
-+/* Profile Count */
-+#define IX_NPEDL_REG_OFFSET_PROFCT 0x28
-+
-+/* Messaging Status */
-+#define IX_NPEDL_REG_OFFSET_STAT 0x2C
-+/* Messaging Control */
-+#define IX_NPEDL_REG_OFFSET_CTL 0x30
-+/* Mailbox Status */
-+#define IX_NPEDL_REG_OFFSET_MBST 0x34
-+/* messaging in/out FIFO */
-+#define IX_NPEDL_REG_OFFSET_FIFO 0x38
-+
-+
-+#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF 0x00100000
-+#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE 0x00080000
-+#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE 0x80000000
-+
-+#define IX_NPEDL_EXCTL_CMD_NPE_STEP 0x01
-+#define IX_NPEDL_EXCTL_CMD_NPE_START 0x02
-+#define IX_NPEDL_EXCTL_CMD_NPE_STOP 0x03
-+#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE 0x04
-+#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT 0x0C
-+#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM 0x10
-+#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM 0x11
-+#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM 0x12
-+#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM 0x13
-+#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG 0x14
-+#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG 0x15
-+
-+#define IX_NPEDL_EXCTL_STATUS_RUN 0x80000000
-+#define IX_NPEDL_EXCTL_STATUS_STOP 0x40000000
-+#define IX_NPEDL_EXCTL_STATUS_CLEAR 0x20000000
-+
-+#define IX_NPEDL_MASK_WFIFO_VALID 0x80000000
-+#define IX_NPEDL_MASK_STAT_OFNE 0x00010000
-+#define IX_NPEDL_MASK_STAT_IFNE 0x00080000
-+
-+#define IX_NPEDL_ECS_DBG_CTXT_REG_0 0x0C
-+#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0 0x04
-+#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0 0x08
-+
-+/* NPE control register bit definitions */
-+#define IX_NPEMH_NPE_CTL_OFE (1 << 16) /**< OutFifoEnable */
-+#define IX_NPEMH_NPE_CTL_IFE (1 << 17) /**< InFifoEnable */
-+#define IX_NPEMH_NPE_CTL_OFEWE (1 << 24) /**< OutFifoEnableWriteEnable */
-+#define IX_NPEMH_NPE_CTL_IFEWE (1 << 25) /**< InFifoEnableWriteEnable */
-+
-+/* NPE status register bit definitions */
-+#define IX_NPEMH_NPE_STAT_OFNE (1 << 16) /**< OutFifoNotEmpty */
-+#define IX_NPEMH_NPE_STAT_IFNF (1 << 17) /**< InFifoNotFull */
-+#define IX_NPEMH_NPE_STAT_OFNF (1 << 18) /**< OutFifoNotFull */
-+#define IX_NPEMH_NPE_STAT_IFNE (1 << 19) /**< InFifoNotEmpty */
-+#define IX_NPEMH_NPE_STAT_MBINT (1 << 20) /**< Mailbox interrupt */
-+#define IX_NPEMH_NPE_STAT_IFINT (1 << 21) /**< InFifo interrupt */
-+#define IX_NPEMH_NPE_STAT_OFINT (1 << 22) /**< OutFifo interrupt */
-+#define IX_NPEMH_NPE_STAT_WFINT (1 << 23) /**< WatchFifo interrupt */
-+
-+#endif
-+
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/platform.h
-@@ -86,6 +86,25 @@ struct ixp4xx_i2c_pins {
- unsigned long scl_pin;
- };
-
-+struct npe_plat_data {
-+ const char *name;
-+ int data_size;
-+ int inst_size;
-+ int id; /* Node ID */
-+};
-+
-+struct mac_plat_info {
-+ int npe_id; /* Node ID of the NPE for this port */
-+ int port_id; /* Port ID for NPE-B @ ixp465 */
-+ int eth_id; /* Physical ID */
-+ int phy_id; /* ID of the connected PHY (PCB/platform dependent) */
-+ int rxq_id; /* Queue ID of the RX-free q */
-+ int rxdoneq_id; /* where incoming packets are returned */
-+ int txq_id; /* Where to push the outgoing packets */
-+ unsigned char hwaddr[6]; /* Desired hardware address */
-+
-+};
-+
- /*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
-Index: linux-2.6.21.7/include/linux/ixp_crypto.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/include/linux/ixp_crypto.h
-@@ -0,0 +1,192 @@
-+
-+#ifndef IX_CRYPTO_H
-+#define IX_CRYPTO_H
-+
-+#define MAX_KEYLEN 64
-+#define NPE_CTX_LEN 80
-+#define AES_BLOCK128 16
-+
-+#define NPE_OP_HASH_GEN_ICV 0x50
-+#define NPE_OP_ENC_GEN_KEY 0xc9
-+
-+
-+#define NPE_OP_HASH_VERIFY 0x01
-+#define NPE_OP_CCM_ENABLE 0x04
-+#define NPE_OP_CRYPT_ENABLE 0x08
-+#define NPE_OP_HASH_ENABLE 0x10
-+#define NPE_OP_NOT_IN_PLACE 0x20
-+#define NPE_OP_HMAC_DISABLE 0x40
-+#define NPE_OP_CRYPT_ENCRYPT 0x80
-+
-+#define MOD_ECB 0x0000
-+#define MOD_CTR 0x1000
-+#define MOD_CBC_ENC 0x2000
-+#define MOD_CBC_DEC 0x3000
-+#define MOD_CCM_ENC 0x4000
-+#define MOD_CCM_DEC 0x5000
-+
-+#define ALGO_AES 0x0800
-+#define CIPH_DECR 0x0000
-+#define CIPH_ENCR 0x0400
-+
-+#define MOD_DES 0x0000
-+#define MOD_TDEA2 0x0100
-+#define MOD_TDEA3 0x0200
-+#define MOD_AES128 0x0000
-+#define MOD_AES192 0x0100
-+#define MOD_AES256 0x0200
-+
-+#define KEYLEN_128 4
-+#define KEYLEN_192 6
-+#define KEYLEN_256 8
-+
-+#define CIPHER_TYPE_NULL 0
-+#define CIPHER_TYPE_DES 1
-+#define CIPHER_TYPE_3DES 2
-+#define CIPHER_TYPE_AES 3
-+
-+#define CIPHER_MODE_ECB 1
-+#define CIPHER_MODE_CTR 2
-+#define CIPHER_MODE_CBC 3
-+#define CIPHER_MODE_CCM 4
-+
-+#define HASH_TYPE_NULL 0
-+#define HASH_TYPE_MD5 1
-+#define HASH_TYPE_SHA1 2
-+#define HASH_TYPE_CBCMAC 3
-+
-+#define OP_REG_DONE 1
-+#define OP_REGISTER 2
-+#define OP_PERFORM 3
-+
-+#define STATE_UNREGISTERED 0
-+#define STATE_REGISTERED 1
-+#define STATE_UNLOADING 2
-+
-+struct crypt_ctl {
-+#ifndef CONFIG_NPE_ADDRESS_COHERENT
-+ u8 mode; /* NPE operation */
-+ u8 init_len;
-+ u16 reserved;
-+#else
-+ u16 reserved;
-+ u8 init_len;
-+ u8 mode; /* NPE operation */
-+#endif
-+ u8 iv[16]; /* IV for CBC mode or CTR IV for CTR mode */
-+ union {
-+ u32 icv;
-+ u32 rev_aes;
-+ } addr;
-+ u32 src_buf;
-+ u32 dest_buf;
-+#ifndef CONFIG_NPE_ADDRESS_COHERENT
-+ u16 auth_offs; /* Authentication start offset */
-+ u16 auth_len; /* Authentication data length */
-+ u16 crypt_offs; /* Cryption start offset */
-+ u16 crypt_len; /* Cryption data length */
-+#else
-+ u16 auth_len; /* Authentication data length */
-+ u16 auth_offs; /* Authentication start offset */
-+ u16 crypt_len; /* Cryption data length */
-+ u16 crypt_offs; /* Cryption start offset */
-+#endif
-+ u32 aadAddr; /* Additional Auth Data Addr for CCM mode */
-+ u32 crypto_ctx; /* NPE Crypto Param structure address */
-+
-+ /* Used by Host */
-+ struct ix_sa_ctx *sa_ctx;
-+ int oper_type;
-+};
-+
-+struct npe_crypt_cont {
-+ union {
-+ struct crypt_ctl crypt;
-+ u8 rev_aes_key[NPE_CTX_LEN];
-+ } ctl;
-+ struct npe_crypt_cont *next;
-+ struct npe_crypt_cont *virt;
-+ dma_addr_t phys;
-+};
-+
-+struct ix_hash_algo {
-+ char *name;
-+ u32 cfgword;
-+ int digest_len;
-+ int aad_len;
-+ unsigned char *icv;
-+ int type;
-+};
-+
-+struct ix_cipher_algo {
-+ char *name;
-+ u32 cfgword_enc;
-+ u32 cfgword_dec;
-+ int block_len;
-+ int iv_len;
-+ int type;
-+ int mode;
-+};
-+
-+struct ix_key {
-+ u8 key[MAX_KEYLEN];
-+ int len;
-+};
-+
-+struct ix_sa_master {
-+ struct device *npe_dev;
-+ struct qm_queue *sendq;
-+ struct qm_queue *recvq;
-+ struct dma_pool *dmapool;
-+ struct npe_crypt_cont *pool;
-+ int pool_size;
-+ rwlock_t lock;
-+};
-+
-+struct ix_sa_dir {
-+ unsigned char *npe_ctx;
-+ dma_addr_t npe_ctx_phys;
-+ int npe_ctx_idx;
-+ u8 npe_mode;
-+};
-+
-+struct ix_sa_ctx {
-+ struct list_head list;
-+ struct ix_sa_master *master;
-+
-+ const struct ix_hash_algo *h_algo;
-+ const struct ix_cipher_algo *c_algo;
-+ struct ix_key c_key;
-+ struct ix_key h_key;
-+
-+ int digest_len;
-+
-+ struct ix_sa_dir encrypt;
-+ struct ix_sa_dir decrypt;
-+
-+ struct npe_crypt_cont *rev_aes;
-+ gfp_t gfp_flags;
-+
-+ int state;
-+ void *priv;
-+
-+ void(*reg_cb)(struct ix_sa_ctx*, int);
-+ void(*perf_cb)(struct ix_sa_ctx*, void*, int);
-+ atomic_t use_cnt;
-+};
-+
-+const struct ix_hash_algo *ix_hash_by_id(int type);
-+const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode);
-+
-+struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags);
-+void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx);
-+
-+int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr,
-+ int datalen, int c_offs, int c_len, int a_offs, int a_len,
-+ int hmac, char *iv, int encrypt);
-+
-+int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx,
-+ const struct ix_cipher_algo *cipher,
-+ const struct ix_hash_algo *auth, int len);
-+
-+#endif
-Index: linux-2.6.21.7/include/linux/ixp_npe.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/include/linux/ixp_npe.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#ifndef NPE_DEVICE_H
-+#define NPE_DEVICE_H
-+
-+#include <linux/miscdevice.h>
-+#include <asm/hardware.h>
-+
-+#ifdef __ARMEB__
-+#undef CONFIG_NPE_ADDRESS_COHERENT
-+#else
-+#define CONFIG_NPE_ADDRESS_COHERENT
-+#endif
-+
-+#if defined(__ARMEB__) || defined (CONFIG_NPE_ADDRESS_COHERENT)
-+#define npe_to_cpu32(x) (x)
-+#define npe_to_cpu16(x) (x)
-+#define cpu_to_npe32(x) (x)
-+#define cpu_to_npe16(x) (x)
-+#else
-+#error NPE_DATA_COHERENT
-+#define NPE_DATA_COHERENT
-+#define npe_to_cpu32(x) be32_to_cpu(x)
-+#define npe_to_cpu16(x) be16_to_cpu(x)
-+#define cpu_to_npe32(x) cpu_to_be32(x)
-+#define cpu_to_npe16(x) cpu_to_be16(x)
-+#endif
-+
-+
-+struct npe_info {
-+ struct resource *res;
-+ void __iomem *addr;
-+ struct npe_plat_data *plat;
-+ u8 img_info[4];
-+ int usage;
-+ int loaded;
-+ u32 exec_count;
-+ u32 ctx_reg2;
-+};
-+
-+
-+static inline void npe_reg_write(struct npe_info *npe, u32 reg, u32 val)
-+{
-+ *(volatile u32*)((u8*)(npe->addr) + reg) = val;
-+}
-+
-+static inline u32 npe_reg_read(struct npe_info *npe, u32 reg)
-+{
-+ return *(volatile u32*)((u8*)(npe->addr) + reg);
-+}
-+
-+static inline u32 npe_status(struct npe_info *npe)
-+{
-+ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCTL);
-+}
-+
-+/* ixNpeDlNpeMgrCommandIssue */
-+static inline void npe_write_exctl(struct npe_info *npe, u32 cmd)
-+{
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
-+}
-+/* ixNpeDlNpeMgrWriteCommandIssue */
-+static inline void
-+npe_write_cmd(struct npe_info *npe, u32 addr, u32 data, int cmd)
-+{
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXDATA, data);
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr);
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
-+}
-+/* ixNpeDlNpeMgrReadCommandIssue */
-+static inline u32
-+npe_read_cmd(struct npe_info *npe, u32 addr, int cmd)
-+{
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr);
-+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
-+ /* Intel reads the data twice - so do we... */
-+ npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA);
-+ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA);
-+}
-+
-+/* ixNpeDlNpeMgrExecAccRegWrite */
-+static inline void npe_write_ecs_reg(struct npe_info *npe, u32 addr, u32 data)
-+{
-+ npe_write_cmd(npe, addr, data, IX_NPEDL_EXCTL_CMD_WR_ECS_REG);
-+}
-+/* ixNpeDlNpeMgrExecAccRegRead */
-+static inline u32 npe_read_ecs_reg(struct npe_info *npe, u32 addr)
-+{
-+ return npe_read_cmd(npe, addr, IX_NPEDL_EXCTL_CMD_RD_ECS_REG);
-+}
-+
-+extern void npe_stop(struct npe_info *npe);
-+extern void npe_start(struct npe_info *npe);
-+extern void npe_reset(struct npe_info *npe);
-+
-+extern struct device *get_npe_by_id(int id);
-+extern void return_npe_dev(struct device *dev);
-+
-+/* NPE Messages */
-+extern int
-+npe_mh_status(struct npe_info *npe);
-+extern int
-+npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp, u8 *macaddr);
-+extern int
-+npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp);
-+extern int
-+npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid);
-+extern int
-+npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp, int enable);
-+extern int
-+npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys, int reset);
-+
-+#endif
-Index: linux-2.6.21.7/include/linux/ixp_qmgr.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/include/linux/ixp_qmgr.h
-@@ -0,0 +1,202 @@
-+/*
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#ifndef IX_QMGR_H
-+#define IX_QMGR_H
-+
-+#include <linux/skbuff.h>
-+#include <linux/list.h>
-+#include <linux/if_ether.h>
-+#include <linux/spinlock.h>
-+#include <linux/platform_device.h>
-+#include <linux/ixp_npe.h>
-+#include <asm/atomic.h>
-+
-+/* All offsets are in 32bit words */
-+#define QUE_LOW_STAT0 0x100 /* 4x Status of the 32 lower queues 0-31 */
-+#define QUE_UO_STAT0 0x104 /* 2x Underflow/Overflow status bits*/
-+#define QUE_UPP_STAT0 0x106 /* 2x Status of thew 32 upper queues 32-63 */
-+#define INT0_SRC_SELREG0 0x108 /* 4x */
-+#define QUE_IE_REG0 0x10c /* 2x */
-+#define QUE_INT_REG0 0x10e /* 2x IRQ reg, write 1 to reset IRQ */
-+
-+#define IX_QMGR_QCFG_BASE 0x800
-+#define IX_QMGR_QCFG_SIZE 0x40
-+#define IX_QMGR_SRAM_SPACE (IX_QMGR_QCFG_BASE + IX_QMGR_QCFG_SIZE)
-+
-+#define MAX_QUEUES 32 /* first, we only support the lower 32 queues */
-+#define MAX_NPES 3
-+
-+enum {
-+ Q_IRQ_ID_E = 0, /* Queue Empty due to last read */
-+ Q_IRQ_ID_NE, /* Queue Nearly Empty due to last read */
-+ Q_IRQ_ID_NF, /* Queue Nearly Full due to last write */
-+ Q_IRQ_ID_F, /* Queue Full due to last write */
-+ Q_IRQ_ID_NOT_E, /* Queue Not Empty due to last write */
-+ Q_IRQ_ID_NOT_NE, /* Queue Not Nearly Empty due to last write */
-+ Q_IRQ_ID_NOT_NF, /* Queue Not Nearly Full due to last read */
-+ Q_IRQ_ID_NOT_F /* Queue Not Full due to last read */
-+};
-+
-+extern struct qm_queue *request_queue(int qid, int len);
-+extern void release_queue(struct qm_queue *queue);
-+extern int queue_set_irq_src(struct qm_queue *queue, int flag);
-+extern void queue_set_watermarks(struct qm_queue *, unsigned ne, unsigned nf);
-+extern int queue_len(struct qm_queue *queue);
-+
-+struct qm_qmgr;
-+struct qm_queue;
-+
-+typedef void(*queue_cb)(struct qm_queue *);
-+
-+struct qm_queue {
-+ int addr; /* word offset from IX_QMGR_SRAM_SPACE */
-+ int len; /* size in words */
-+ int id; /* Q Id */
-+ u32 __iomem *acc_reg;
-+ struct device *dev;
-+ atomic_t use;
-+ queue_cb irq_cb;
-+ void *cb_data;
-+};
-+
-+#ifndef CONFIG_NPE_ADDRESS_COHERENT
-+struct eth_ctl {
-+ u32 next;
-+ u16 buf_len;
-+ u16 pkt_len;
-+ u32 phys_addr;
-+ u8 dest_id;
-+ u8 src_id;
-+ u16 flags;
-+ u8 qos;
-+ u8 padlen;
-+ u16 vlan_tci;
-+ u8 dest_mac[ETH_ALEN];
-+ u8 src_mac[ETH_ALEN];
-+};
-+
-+#else
-+struct eth_ctl {
-+ u32 next;
-+ u16 pkt_len;
-+ u16 buf_len;
-+ u32 phys_addr;
-+ u16 flags;
-+ u8 src_id;
-+ u8 dest_id;
-+ u16 vlan_tci;
-+ u8 padlen;
-+ u8 qos;
-+ u8 dest_mac[ETH_ALEN];
-+ u8 src_mac[ETH_ALEN];
-+};
-+#endif
-+
-+struct npe_cont {
-+ struct eth_ctl eth;
-+ void *data;
-+ struct npe_cont *next;
-+ struct npe_cont *virt;
-+ dma_addr_t phys;
-+};
-+
-+struct qm_qmgr {
-+ u32 __iomem *addr;
-+ struct resource *res;
-+ struct qm_queue *queues[MAX_QUEUES];
-+ rwlock_t lock;
-+ struct npe_cont *pool;
-+ struct dma_pool *dmapool;
-+ int irq;
-+};
-+
-+static inline void queue_write_cfg_reg(struct qm_queue *queue, u32 val)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id) = val;
-+}
-+static inline u32 queue_read_cfg_reg(struct qm_queue *queue)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ return *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
-+}
-+
-+static inline void queue_ack_irq(struct qm_queue *queue)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ *(qmgr->addr + QUE_INT_REG0) = 1 << queue->id;
-+}
-+
-+static inline void queue_enable_irq(struct qm_queue *queue)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ *(qmgr->addr + QUE_IE_REG0) |= 1 << queue->id;
-+}
-+
-+static inline void queue_disable_irq(struct qm_queue *queue)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ *(qmgr->addr + QUE_IE_REG0) &= ~(1 << queue->id);
-+}
-+
-+static inline void queue_put_entry(struct qm_queue *queue, u32 entry)
-+{
-+ *(queue->acc_reg) = npe_to_cpu32(entry);
-+}
-+
-+static inline u32 queue_get_entry(struct qm_queue *queue)
-+{
-+ return cpu_to_npe32(*queue->acc_reg);
-+}
-+
-+static inline struct npe_cont *qmgr_get_cont(struct qm_qmgr *qmgr)
-+{
-+ unsigned long flags;
-+ struct npe_cont *cont;
-+
-+ if (!qmgr->pool)
-+ return NULL;
-+ write_lock_irqsave(&qmgr->lock, flags);
-+ cont = qmgr->pool;
-+ qmgr->pool = cont->next;
-+ write_unlock_irqrestore(&qmgr->lock, flags);
-+ return cont;
-+}
-+
-+static inline void qmgr_return_cont(struct qm_qmgr *qmgr,struct npe_cont *cont)
-+{
-+ unsigned long flags;
-+
-+ write_lock_irqsave(&qmgr->lock, flags);
-+ cont->next = qmgr->pool;
-+ qmgr->pool = cont;
-+ write_unlock_irqrestore(&qmgr->lock, flags);
-+}
-+
-+static inline int queue_stat(struct qm_queue *queue)
-+{
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+ u32 reg = *(qmgr->addr + QUE_UO_STAT0 + (queue->id >> 4));
-+ return (reg >> (queue->id & 0xf) << 1) & 3;
-+}
-+
-+/* Prints the queue state, which is very, very helpfull for debugging */
-+static inline void queue_state(struct qm_queue *queue)
-+{
-+ u32 val=0, lstat=0;
-+ int offs;
-+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
-+
-+ offs = queue->id/8 + QUE_LOW_STAT0;
-+ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
-+ lstat = (*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x0f;
-+
-+ printk("Qid[%02d]: Wptr=%4x, Rptr=%4x, diff=%4x, Stat:%x\n", queue->id,
-+ val&0x7f, (val>>7) &0x7f, (val - (val >> 7)) & 0x7f, lstat);
-+}
-+
-+#endif
diff --git a/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch b/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch
deleted file mode 100644
index 6adf4995ba..0000000000
--- a/target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch
+++ /dev/null
@@ -1,17 +0,0 @@
----
- drivers/net/ixp4xx/mac_driver.c | 24 ++++++++++--------------
- 1 file changed, 10 insertions(+), 14 deletions(-)
-
-Index: linux-2.6.21.7/drivers/net/ixp4xx/mac_driver.c
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/ixp4xx/mac_driver.c
-+++ linux-2.6.21.7/drivers/net/ixp4xx/mac_driver.c
-@@ -842,7 +842,7 @@ static void __exit finish_mac(void)
- }
- }
-
--module_init(init_mac);
-+late_initcall(init_mac);
- module_exit(finish_mac);
-
- MODULE_LICENSE("GPL");
diff --git a/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch b/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch
deleted file mode 100644
index 9ed1b42fe7..0000000000
--- a/target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch
+++ /dev/null
@@ -1,392 +0,0 @@
----
- drivers/net/ixp4xx/Kconfig | 10 +
- drivers/net/ixp4xx/Makefile | 1
- drivers/net/ixp4xx/npe_ucode.c | 185 +++++++++++++++++++++++++++++++++
- drivers/net/ixp4xx/ucode_dl.c | 43 ++++---
- include/asm-arm/arch-ixp4xx/platform.h | 19 +++
- include/linux/ixp_npe.h | 1
- 6 files changed, 239 insertions(+), 20 deletions(-)
-
-Index: linux-2.6.21.7/drivers/net/ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/ixp4xx/Kconfig
-+++ linux-2.6.21.7/drivers/net/ixp4xx/Kconfig
-@@ -11,6 +11,7 @@ config IXP4XX_NPE
- tristate "IXP4xx NPE support"
- depends on ARCH_IXP4XX
- depends on NET_ETHERNET
-+ select CRC16
- help
- The IXP4XX NPE driver supports the 3 CPU co-processors called
- "Network Processing Engines" (NPE). It adds support fo downloading
-@@ -18,7 +19,7 @@ config IXP4XX_NPE
- More about this at: Documentation/networking/ixp4xx/README.
- You can either use this OR the Intel Access Library (IAL)
-
--config IXP4XX_FW_LOAD
-+config IXP4XX_NPE_FW_LOAD
- bool "Use Firmware hotplug for Microcode download"
- depends on IXP4XX_NPE
- select HOTPLUG
-@@ -28,6 +29,13 @@ config IXP4XX_FW_LOAD
- /usr/lib/hotplug/firmware/NPE-[ABC]
- see Documentation/firmware_class/hotplug-script
-
-+config IXP4XX_NPE_FW_MTD
-+ bool "Load firmware from an mtd partition"
-+ depends on IXP4XX_NPE && MTD_IXP4XX
-+ help
-+ With this option, the driver will search for
-+ the firmware into an MTD partition.
-+
- config IXP4XX_MAC
- tristate "IXP4xx MAC support"
- depends on IXP4XX_NPE
-Index: linux-2.6.21.7/drivers/net/ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/ixp4xx/Makefile
-+++ linux-2.6.21.7/drivers/net/ixp4xx/Makefile
-@@ -1,5 +1,6 @@
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
- obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
-+obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o
- obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
- obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o
-
-Index: linux-2.6.21.7/drivers/net/ixp4xx/npe_ucode.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/drivers/net/ixp4xx/npe_ucode.c
-@@ -0,0 +1,185 @@
-+/*
-+ * Provide an NPE platform device for microcode handling
-+ *
-+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
-+ *
-+ * This file is released under the GPLv2
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/firmware.h>
-+#include <linux/mtd/mtd.h>
-+
-+#include <linux/ixp_npe.h>
-+
-+#define DL_MAGIC 0xfeedf00d
-+#define DL_MAGIC_SWAP 0x0df0edfe
-+
-+#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
-+ sizeof(struct dl_image))
-+
-+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
-+#define IMG_REV_MINOR(id) ((id) & 0x0f)
-+#define IMG_FUNC(id) (((id) >> 16) & 0xff)
-+#define IMG_NPE(id) (((id) >> 24) & 0x0f)
-+#define IMG_IXP(id) (((id) >> 28) & 0x0f)
-+
-+static struct platform_driver ixp4xx_npe_ucode_driver;
-+static unsigned char *partition_name = NULL;
-+
-+static void print_image_info(u32 id, u32 offset, u32 size)
-+{
-+ unsigned char idx;
-+ const char *names[] = { "IXP425", "IXP465", "unknown" };
-+
-+ idx = IMG_IXP(id) < 2 ? IMG_IXP(id) : 2;
-+
-+ printk(KERN_INFO "npe: found at 0x%x, %s/NPE-%c func: %02x, rev: %x.%x, "
-+ "size: %5d, id: %08x\n", offset, names[idx], IMG_NPE(id) + 'A',
-+ IMG_FUNC(id), IMG_REV_MAJOR(id), IMG_REV_MINOR(id), size, id);
-+}
-+
-+void npe_swap_image(struct dl_image *image)
-+{
-+ unsigned int i;
-+
-+ image->magic = swab32(image->magic);
-+ image->id = swab32(image->id);
-+ image->size = swab32(image->size);
-+
-+ for (i = 0; i < image->size; i++)
-+ image->u.data[i] = swab32(image->u.data[i]);
-+}
-+
-+static void npe_find_microcode(struct mtd_info *mtd)
-+{
-+ u32 buf;
-+ u32 magic = htonl(DL_MAGIC);
-+ u32 id, size;
-+ size_t retlen;
-+ int err;
-+ unsigned int offset = 0;
-+
-+ printk("npe: searching for firmware...\n");
-+
-+ while (offset < mtd->size) {
-+
-+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &buf);
-+ offset += retlen;
-+
-+ if (buf != magic)
-+ continue;
-+
-+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &id);
-+ offset += retlen;
-+
-+ if (id == magic)
-+ break;
-+
-+ id = ntohl(id);
-+
-+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &size);
-+ offset += retlen;
-+
-+ size = (ntohl(size) * 4) + 12;
-+
-+ print_image_info(id, offset - 12, size);
-+
-+ if (size < 24000 && ( IMG_FUNC(id) == 0x01 || IMG_FUNC(id) == 0x00) || IMG_FUNC(id) == 0x05 ) { // XXX fix size/detection
-+
-+ struct dl_image *image = kmalloc(size, GFP_KERNEL);
-+
-+ /* we are going to load it, rewind offset */
-+ offset -= 12;
-+
-+ if (image) {
-+ err = mtd->read(mtd, offset, size, &retlen, (u_char *) image);
-+
-+ if (err == 0 && retlen == size) {
-+ if (image->magic == DL_MAGIC_SWAP)
-+ npe_swap_image(image);
-+
-+ store_npe_image(image, NULL);
-+ } else {
-+ printk(KERN_ERR "unable to read firmware\n");
-+ }
-+
-+ kfree(image);
-+ }
-+
-+ offset += size;
-+ }
-+ }
-+}
-+
-+static void npe_flash_add(struct mtd_info *mtd)
-+{
-+ if (partition_name == NULL)
-+ return;
-+
-+ if (strcmp(mtd->name, partition_name) == 0) {
-+ npe_find_microcode(mtd);
-+ }
-+}
-+
-+static void npe_flash_remove(struct mtd_info *mtd) {
-+}
-+
-+static struct mtd_notifier npe_flash_notifier = {
-+ .add = npe_flash_add,
-+ .remove = npe_flash_remove,
-+};
-+
-+static int npe_ucode_probe(struct platform_device *pdev)
-+{
-+ struct npe_ucode_platform_data *data = pdev->dev.platform_data;
-+
-+ if (partition_name)
-+ return -EEXIST;
-+
-+ if (data && data->mtd_partition) {
-+ partition_name = data->mtd_partition;
-+ return 0;
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+static int npe_ucode_remove(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+static struct platform_driver ixp4xx_npe_ucode_driver = {
-+ .driver = {
-+ .name = "ixp4xx_npe_ucode",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = npe_ucode_probe,
-+ .remove = npe_ucode_remove,
-+};
-+
-+static int __init npe_ucode_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&ixp4xx_npe_ucode_driver);
-+ register_mtd_user(&npe_flash_notifier);
-+
-+ return ret;
-+}
-+
-+static void __exit npe_ucode_exit(void)
-+{
-+ unregister_mtd_user(&npe_flash_notifier);
-+ platform_driver_unregister(&ixp4xx_npe_ucode_driver);
-+}
-+
-+module_init(npe_ucode_init);
-+module_exit(npe_ucode_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-Index: linux-2.6.21.7/drivers/net/ixp4xx/ucode_dl.c
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/ixp4xx/ucode_dl.c
-+++ linux-2.6.21.7/drivers/net/ixp4xx/ucode_dl.c
-@@ -16,6 +16,7 @@
- #include <linux/firmware.h>
- #include <linux/dma-mapping.h>
- #include <linux/byteorder/swab.h>
-+#include <linux/crc16.h>
- #include <asm/uaccess.h>
- #include <asm/io.h>
-
-@@ -26,6 +27,12 @@
- #define DL_MAGIC 0xfeedf00d
- #define DL_MAGIC_SWAP 0x0df0edfe
-
-+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f)
-+#define IMG_REV_MINOR(id) ((id) & 0x0f)
-+#define IMG_FUNC(id) (((id) >> 16) & 0xff)
-+#define IMG_NPE(id) (((id) >> 24) & 0x0f)
-+#define IMG_IXP(id) (((id) >> 28) & 0x0f)
-+
- #define EOF_BLOCK 0xf
- #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
- sizeof(struct dl_image))
-@@ -38,21 +45,6 @@ enum blk_type {
- data,
- };
-
--struct dl_block {
-- u32 type;
-- u32 offset;
--};
--
--struct dl_image {
-- u32 magic;
-- u32 id;
-- u32 size;
-- union {
-- u32 data[0];
-- struct dl_block block[0];
-- } u;
--};
--
- struct dl_codeblock {
- u32 npe_addr;
- u32 size;
-@@ -127,20 +119,33 @@ download_block(struct npe_info *npe, str
- return 0;
- }
-
--static int store_npe_image(struct dl_image *image, struct device *dev)
-+int store_npe_image(struct dl_image *image, struct device *dev)
- {
- struct dl_block *blk;
- struct dl_codeblock *cb;
- struct npe_info *npe;
- int ret=0;
-+ u16 crc;
-
- if (!dev) {
-- dev = get_npe_by_id( (image->id >> 24) & 0xf);
-+ dev = get_npe_by_id(IMG_NPE(image->id));
- return_npe_dev(dev);
- }
- if (!dev)
- return -ENODEV;
-
-+ if (image->size > 24000) { // XXX fix max size
-+ printk(KERN_ERR "npe: firmware too large\n");
-+ return -EFBIG;
-+ }
-+
-+ if (IMG_REV_MAJOR(image->id) != 2) {
-+ printk(KERN_ERR "npe: only revision 2 is supported at this time\n");
-+ return -EINVAL;
-+ }
-+
-+ crc = crc16(0, (u8 *) image, IMG_SIZE(image));
-+
- npe = dev_get_drvdata(dev);
- if (npe->loaded && (npe->usage > 0)) {
- printk(KERN_INFO "Cowardly refusing to reload an Image "
-@@ -267,8 +272,7 @@ static ssize_t ucode_write(struct file *
-
- static void npe_firmware_probe(struct device *dev)
- {
--#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \
-- && defined(MODULE)
-+#ifdef CONFIG_IXP4XX_NPE_FW_LOADER
- const struct firmware *fw_entry;
- struct npe_info *npe = dev_get_drvdata(dev);
- struct dl_image *image;
-@@ -477,3 +481,4 @@ MODULE_AUTHOR("Christian Hohnstaedt <cho
-
- EXPORT_SYMBOL(get_npe_by_id);
- EXPORT_SYMBOL(return_npe_dev);
-+EXPORT_SYMBOL(store_npe_image);
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/platform.h
-@@ -86,6 +86,21 @@ struct ixp4xx_i2c_pins {
- unsigned long scl_pin;
- };
-
-+struct dl_block {
-+ u32 type;
-+ u32 offset;
-+};
-+
-+struct dl_image {
-+ u32 magic;
-+ u32 id;
-+ u32 size;
-+ union {
-+ u32 data[0];
-+ struct dl_block block[0];
-+ } u;
-+};
-+
- struct npe_plat_data {
- const char *name;
- int data_size;
-@@ -105,6 +120,10 @@ struct mac_plat_info {
-
- };
-
-+struct npe_ucode_platform_data {
-+ unsigned char *mtd_partition;
-+};
-+
- /*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
-Index: linux-2.6.21.7/include/linux/ixp_npe.h
-===================================================================
---- linux-2.6.21.7.orig/include/linux/ixp_npe.h
-+++ linux-2.6.21.7/include/linux/ixp_npe.h
-@@ -99,6 +99,7 @@ extern void npe_reset(struct npe_info *n
-
- extern struct device *get_npe_by_id(int id);
- extern void return_npe_dev(struct device *dev);
-+extern int store_npe_image(struct dl_image *image, struct device *dev);
-
- /* NPE Messages */
- extern int
diff --git a/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch b/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch
deleted file mode 100644
index fcff63a19a..0000000000
--- a/target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-Index: linux-2.6.21.7/drivers/net/ixp4xx/mac_driver.c
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/ixp4xx/mac_driver.c
-+++ linux-2.6.21.7/drivers/net/ixp4xx/mac_driver.c
-@@ -161,6 +161,16 @@ static int media_check(struct net_device
- {
- struct mac_info *mac = netdev_priv(dev);
-
-+ if ( mac->mii.phy_id < 0 ) {
-+ if ( init ) {
-+ netif_carrier_on(mac->mii.dev);
-+ mac->mii.full_duplex = 1;
-+ update_duplex_mode(dev);
-+ return 1;
-+ }
-+ return 0;
-+ }
-+
- if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) {
- update_duplex_mode(dev);
- return 1;
-@@ -448,7 +458,12 @@ static int ixmac_ioctl(struct net_device
- return -EINVAL;
- if (!try_module_get(THIS_MODULE))
- return -ENODEV;
-- rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed);
-+ if ( mac->mii.phy_id < 0 ) {
-+ duplex_changed = 0;
-+ rc = -EOPNOTSUPP;
-+ } else {
-+ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed);
-+ }
- module_put(THIS_MODULE);
- if (duplex_changed)
- update_duplex_mode(dev);
-@@ -478,6 +493,9 @@ static void ixmac_get_drvinfo(struct net
- static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct mac_info *mac = netdev_priv(dev);
-+ if ( mac->mii.phy_id < 0 ) {
-+ return 0;
-+ }
- mii_ethtool_gset(&mac->mii, cmd);
- return 0;
- }
-@@ -486,6 +504,9 @@ static int ixmac_set_settings(struct net
- {
- struct mac_info *mac = netdev_priv(dev);
- int rc;
-+ if ( mac->mii.phy_id < 0 ) {
-+ return -EOPNOTSUPP;
-+ }
- rc = mii_ethtool_sset(&mac->mii, cmd);
- return rc;
- }
-@@ -493,12 +514,18 @@ static int ixmac_set_settings(struct net
- static int ixmac_nway_reset(struct net_device *dev)
- {
- struct mac_info *mac = netdev_priv(dev);
-+ if ( mac->mii.phy_id < 0 ) {
-+ return -EOPNOTSUPP;
-+ }
- return mii_nway_restart(&mac->mii);
- }
-
- static u32 ixmac_get_link(struct net_device *dev)
- {
- struct mac_info *mac = netdev_priv(dev);
-+ if ( mac->mii.phy_id < 0 ) {
-+ return 1;
-+ }
- return mii_link_ok(&mac->mii);
- }
-
diff --git a/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch b/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch
deleted file mode 100644
index 5d72f06987..0000000000
--- a/target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -138,6 +138,29 @@ static struct platform_device nslu2_uart
- .resource = nslu2_uart_resources,
- };
-
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 1,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
- static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_controller,
- &nslu2_flash,
-@@ -145,6 +168,7 @@ static struct platform_device *nslu2_dev
- #ifdef CONFIG_LEDS_IXP4XX
- &nslu2_leds,
- #endif
-+ &mac0
- };
-
- static void nslu2_power_off(void)
diff --git a/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch b/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch
deleted file mode 100644
index 023dd6c52b..0000000000
--- a/target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -123,12 +123,36 @@ static struct platform_device nas100d_ua
- .resource = nas100d_uart_resources,
- };
-
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 0,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
- static struct platform_device *nas100d_devices[] __initdata = {
- &nas100d_i2c_controller,
- &nas100d_flash,
- #ifdef CONFIG_LEDS_IXP4XX
- &nas100d_leds,
- #endif
-+ &mac0
- };
-
- static void nas100d_power_off(void)
diff --git a/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch b/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch
deleted file mode 100644
index 764254486c..0000000000
--- a/target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch
+++ /dev/null
@@ -1,35 +0,0 @@
----
- arch/arm/mach-ixp4xx/nslu2-setup.c | 13 ++++++++++++-
- 1 file changed, 12 insertions(+), 1 deletion(-)
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -161,6 +161,16 @@ static struct platform_device mac0 = {
- .resource = &res_mac0,
- };
-
-+struct npe_ucode_platform_data nslu2_npe_ucode_data = {
-+ .mtd_partition = "FIS directory",
-+};
-+
-+static struct platform_device nslu2_npe_ucode = {
-+ .name = "ixp4xx_npe_ucode",
-+ .id = 0,
-+ .dev.platform_data = &nslu2_npe_ucode_data,
-+};
-+
- static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_controller,
- &nslu2_flash,
-@@ -168,7 +178,8 @@ static struct platform_device *nslu2_dev
- #ifdef CONFIG_LEDS_IXP4XX
- &nslu2_leds,
- #endif
-- &mac0
-+ &mac0,
-+ &nslu2_npe_ucode,
- };
-
- static void nslu2_power_off(void)
diff --git a/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch b/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch
deleted file mode 100644
index 836ed412a3..0000000000
--- a/target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch
+++ /dev/null
@@ -1,34 +0,0 @@
----
- arch/arm/mach-ixp4xx/nas100d-setup.c | 13 ++++++++++++-
- 1 file changed, 12 insertions(+), 1 deletion(-)
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -146,13 +146,24 @@ static struct platform_device mac0 = {
- .resource = &res_mac0,
- };
-
-+struct npe_ucode_platform_data nas100d_npe_ucode_data = {
-+ .mtd_partition = "microcode",
-+};
-+
-+static struct platform_device nas100d_npe_ucode = {
-+ .name = "ixp4xx_npe_ucode",
-+ .id = 0,
-+ .dev.platform_data = &nas100d_npe_ucode_data,
-+};
-+
- static struct platform_device *nas100d_devices[] __initdata = {
- &nas100d_i2c_controller,
- &nas100d_flash,
- #ifdef CONFIG_LEDS_IXP4XX
- &nas100d_leds,
- #endif
-- &mac0
-+ &mac0,
-+ &nas100d_npe_ucode,
- };
-
- static void nas100d_power_off(void)
diff --git a/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch b/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch
deleted file mode 100644
index 1adb3fdb96..0000000000
--- a/target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch
+++ /dev/null
@@ -1,56 +0,0 @@
----
- arch/arm/mach-ixp4xx/nas100d-setup.c | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -16,6 +16,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/mtd/mtd.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -166,6 +167,30 @@ static struct platform_device *nas100d_d
- &nas100d_npe_ucode,
- };
-
-+static void nas100d_flash_add(struct mtd_info *mtd)
-+{
-+ if (strcmp(mtd->name, "RedBoot config") == 0) {
-+ size_t retlen;
-+ u_char mac[6];
-+
-+ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) {
-+ printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+ memcpy(plat_mac0.hwaddr, mac, 6);
-+ } else {
-+ printk(KERN_ERR "nas100d mac: read failed\n");
-+ }
-+ }
-+}
-+
-+static void nas100d_flash_remove(struct mtd_info *mtd) {
-+}
-+
-+static struct mtd_notifier nas100d_flash_notifier = {
-+ .add = nas100d_flash_add,
-+ .remove = nas100d_flash_remove,
-+};
-+
- static void nas100d_power_off(void)
- {
- /* This causes the box to drop the power and go dead. */
-@@ -198,6 +223,8 @@ static void __init nas100d_init(void)
- (void)platform_device_register(&nas100d_uart);
-
- platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
-+
-+ register_mtd_user(&nas100d_flash_notifier);
- }
-
- MACHINE_START(NAS100D, "Iomega NAS 100d")
diff --git a/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch b/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch
deleted file mode 100644
index a290cf6709..0000000000
--- a/target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch
+++ /dev/null
@@ -1,56 +0,0 @@
----
- arch/arm/mach-ixp4xx/nslu2-setup.c | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/mtd/mtd.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -182,6 +183,30 @@ static struct platform_device *nslu2_dev
- &nslu2_npe_ucode,
- };
-
-+static void nslu2_flash_add(struct mtd_info *mtd)
-+{
-+ if (strcmp(mtd->name, "RedBoot") == 0) {
-+ size_t retlen;
-+ u_char mac[6];
-+
-+ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
-+ printk(KERN_INFO "nslu2 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+ memcpy(plat_mac0.hwaddr, mac, 6);
-+ } else {
-+ printk(KERN_ERR "nslu2 mac: read failed\n");
-+ }
-+ }
-+}
-+
-+static void nslu2_flash_remove(struct mtd_info *mtd) {
-+}
-+
-+static struct mtd_notifier nslu2_flash_notifier = {
-+ .add = nslu2_flash_add,
-+ .remove = nslu2_flash_remove,
-+};
-+
- static void nslu2_power_off(void)
- {
- /* This causes the box to drop the power and go dead. */
-@@ -224,6 +249,8 @@ static void __init nslu2_init(void)
- (void)platform_device_register(&nslu2_uart);
-
- platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+
-+ register_mtd_user(&nslu2_flash_notifier);
- }
-
- MACHINE_START(NSLU2, "Linksys NSLU2")
diff --git a/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch b/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch
deleted file mode 100644
index e93600e5f1..0000000000
--- a/target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From: Alan Cox <alan@redhat.com>
-To: Alessandro Zummo <alessandro.zummo@towertech.it>
-Cc: Jeff Garzik <jgarzik@redhat.com>, Alan Cox <alan@redhat.com>
-Subject: Re: drivers/ata/pata_artop.c
-Date: Sun, 15 Oct 2006 14:25:16 -0400
-User-Agent: Mutt/1.4.1i
-
-On Sun, Oct 15, 2006 at 07:18:31PM +0200, Alessandro Zummo wrote:
-> In the discovery phase there's a lot of time spent in the detection
-> of the second port.
-
-The error recovery is a bit determined right now - Tejun's been doing some
-work on SRST behaviour and also for the worst cases polled detect so it
-should come out ok
-
-> What's the correct way to inform the driver
-> to avoid checking the second port?
-
-Set the number of ports to 1 in your own tree for now. The real fix is
-not to go poking at pata ports if the ret is 0xFF
-
----
- drivers/ata/pata_artop.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-Index: linux-2.6.21.7/drivers/ata/pata_artop.c
-===================================================================
---- linux-2.6.21.7.orig/drivers/ata/pata_artop.c
-+++ linux-2.6.21.7/drivers/ata/pata_artop.c
-@@ -26,6 +26,7 @@
- #include <scsi/scsi_host.h>
- #include <linux/libata.h>
- #include <linux/ata.h>
-+#include <asm/mach-types.h>
-
- #define DRV_NAME "pata_artop"
- #define DRV_VERSION "0.4.2"
-@@ -469,6 +470,11 @@ static int artop_init_one (struct pci_de
- pci_read_config_byte(pdev, 0x4a, &reg);
- pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
-
-+ /* NAS100D workaround */
-+#ifdef CONFIG_MACH_NAS100D
-+ if (machine_is_nas100d())
-+ ports = 1;
-+#endif
- }
-
- BUG_ON(info == NULL);
diff --git a/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch b/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch
deleted file mode 100644
index 169a53703c..0000000000
--- a/target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch
+++ /dev/null
@@ -1,927 +0,0 @@
-Index: linux-2.6.21.7/drivers/net/via-velocity.c
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/via-velocity.c
-+++ linux-2.6.21.7/drivers/net/via-velocity.c
-@@ -96,11 +96,31 @@ MODULE_AUTHOR("VIA Networking Technologi
- MODULE_LICENSE("GPL");
- MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
-
-+/* Valid values for vdebug (additive, this is a bitmask):
-+ * 0x00 => off
-+ * 0x01 => always on
-+ * 0x02 => additional detail on tx (rx, too, if anyone implements same)
-+ * 0x04 => detail the initialization process
-+ * 0x08 => spot debug detail; to be used as developers see fit
-+ */
-+static int vdebug = 0;
-+
-+/* HAIL - these macros are for the normal 0x01-type tracing... */
-+#define HAIL(S) \
-+ if (vdebug&1) printk(KERN_NOTICE "%s\n", (S));
-+#define HAILS(S,T) \
-+ if (vdebug&1) printk(KERN_NOTICE "%s -> status=0x%x\n", (S), (T));
-+
- #define VELOCITY_PARAM(N,D) \
- static int N[MAX_UNITS]=OPTION_DEFAULT;\
- module_param_array(N, int, NULL, 0); \
- MODULE_PARM_DESC(N, D);
-
-+#define VELO_DEBUG_MIN 0
-+#define VELO_DEBUG_MAX 255
-+#define VELO_DEBUG_DEF 0
-+VELOCITY_PARAM(velo_debug, "Debug level");
-+
- #define RX_DESC_MIN 64
- #define RX_DESC_MAX 255
- #define RX_DESC_DEF 64
-@@ -385,12 +405,12 @@ static void __devinit velocity_set_int_o
- if (val == -1)
- *opt = def;
- else if (val < min || val > max) {
-- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
-- devname, name, min, max);
-+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
-+ name, min, max);
- *opt = def;
- } else {
-- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
-- devname, name, val);
-+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "via-velocity: set value of parameter %s to %d\n",
-+ name, val);
- *opt = val;
- }
- }
-@@ -415,12 +435,12 @@ static void __devinit velocity_set_bool_
- if (val == -1)
- *opt |= (def ? flag : 0);
- else if (val < 0 || val > 1) {
-- printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
-- devname, name);
-+ printk(KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (0-1)\n",
-+ name);
- *opt |= (def ? flag : 0);
- } else {
-- printk(KERN_INFO "%s: set parameter %s to %s\n",
-- devname, name, val ? "TRUE" : "FALSE");
-+ printk(KERN_INFO "via-velocity: set parameter %s to %s\n",
-+ name, val ? "TRUE" : "FALSE");
- *opt |= (val ? flag : 0);
- }
- }
-@@ -438,6 +458,7 @@ static void __devinit velocity_set_bool_
- static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname)
- {
-
-+ velocity_set_int_opt(&opts->velo_debug, velo_debug[index], VELO_DEBUG_MIN, VELO_DEBUG_MAX, VELO_DEBUG_DEF, "velo_debug", devname);
- velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
- velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
- velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
-@@ -452,6 +473,7 @@ static void __devinit velocity_get_optio
- velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
- velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname);
- opts->numrx = (opts->numrx & ~3);
-+ vdebug = opts->velo_debug;
- }
-
- /**
-@@ -466,6 +488,8 @@ static void velocity_init_cam_filter(str
- {
- struct mac_regs __iomem * regs = vptr->mac_regs;
-
-+ HAIL("velocity_init_cam_filter");
-+
- /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
- WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, &regs->MCFG);
- WORD_REG_BITS_ON(MCFG_VIDFR, &regs->MCFG);
-@@ -484,14 +508,12 @@ static void velocity_init_cam_filter(str
- WORD_REG_BITS_ON(MCFG_RTGOPT, &regs->MCFG);
-
- mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM);
-- vptr->vCAMmask[0] |= 1;
-- mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
- } else {
- u16 temp = 0;
- mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
-- temp = 1;
-- mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
- }
-+ vptr->vCAMmask[0] |= 1;
-+ mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
- }
-
- /**
-@@ -508,13 +530,15 @@ static void velocity_rx_reset(struct vel
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i;
-
-+ HAIL("velocity_rx_reset");
- vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
-
- /*
- * Init state, all RD entries belong to the NIC
- */
- for (i = 0; i < vptr->options.numrx; ++i)
-- vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC;
-+ /* vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; BE */
-+ vptr->rd_ring[i].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
-
- writew(vptr->options.numrx, &regs->RBRDU);
- writel(vptr->rd_pool_dma, &regs->RDBaseLo);
-@@ -537,12 +561,15 @@ static void velocity_init_registers(stru
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i, mii_status;
-
-+ if (vdebug&5) printk(KERN_NOTICE "velocity_init_registers: entering\n");
-+
- mac_wol_reset(regs);
-
- switch (type) {
- case VELOCITY_INIT_RESET:
- case VELOCITY_INIT_WOL:
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: RESET or WOL\n");
- netif_stop_queue(vptr->dev);
-
- /*
-@@ -570,12 +597,13 @@ static void velocity_init_registers(stru
-
- case VELOCITY_INIT_COLD:
- default:
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: COLD or default\n");
- /*
- * Do reset
- */
- velocity_soft_reset(vptr);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: soft reset complete.\n");
- mdelay(5);
--
- mac_eeprom_reload(regs);
- for (i = 0; i < 6; i++) {
- writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
-@@ -593,11 +621,16 @@ static void velocity_init_registers(stru
- */
- BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), &regs->CFGB);
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Initializing CAM filter\n");
- /*
- * Init CAM filter
- */
-+ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: about to init CAM filters\n");
-+ mdelay(5); /* MJW - ARM processors, kernel 2.6.19 - this fixes oopses and hangs */
- velocity_init_cam_filter(vptr);
-+ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: init CAM filters complete\n");
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Setting packet filter\n");
- /*
- * Set packet filter: Receive directed and broadcast address
- */
-@@ -607,10 +640,12 @@ static void velocity_init_registers(stru
- * Enable MII auto-polling
- */
- enable_mii_autopoll(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: enable_mii_autopoll complete.\n");
-
- vptr->int_mask = INT_MASK_DEF;
-
-- writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo);
-+ /* writel(cpu_to_le32(vptr->rd_pool_dma), &regs->RDBaseLo); BE */
-+ writel((vptr->rd_pool_dma), &regs->RDBaseLo); /* BE */
- writew(vptr->options.numrx - 1, &regs->RDCSize);
- mac_rx_queue_run(regs);
- mac_rx_queue_wake(regs);
-@@ -618,10 +653,13 @@ static void velocity_init_registers(stru
- writew(vptr->options.numtx - 1, &regs->TDCSize);
-
- for (i = 0; i < vptr->num_txq; i++) {
-- writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i]));
-+ /* writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); BE */
-+ writel((vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); /* BE */
- mac_tx_queue_run(regs, i);
- }
-
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: DMA settings complete.\n");
-+
- init_flow_control_register(vptr);
-
- writel(CR0_STOP, &regs->CR0Clr);
-@@ -640,8 +678,10 @@ static void velocity_init_registers(stru
-
- enable_flow_control_ability(vptr);
- mac_hw_mibs_init(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Set interrupt mask\n");
- mac_write_int_mask(vptr->int_mask, regs);
- mac_clear_isr(regs);
-+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: complete.\n");
-
- }
- }
-@@ -659,6 +699,7 @@ static int velocity_soft_reset(struct ve
- struct mac_regs __iomem * regs = vptr->mac_regs;
- int i = 0;
-
-+ HAIL("velocity_soft_reset");
- writel(CR0_SFRST, &regs->CR0Set);
-
- for (i = 0; i < W_MAX_TIMEOUT; i++) {
-@@ -722,6 +763,7 @@ static int __devinit velocity_found1(str
- VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
- printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
- printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
-+ printk(KERN_INFO "BE support, misc. fixes MJW 01Jan2007 - may be unstable\n");
- first = 0;
- }
-
-@@ -935,6 +977,7 @@ static int velocity_init_rings(struct ve
- dma_addr_t pool_dma;
- u8 *pool;
-
-+ HAIL("velocity_init_rings");
- /*
- * Allocate all RD/TD rings a single pool
- */
-@@ -997,6 +1040,7 @@ static int velocity_init_rings(struct ve
- static void velocity_free_rings(struct velocity_info *vptr)
- {
- int size;
-+ HAIL("velocity_free_rings");
-
- size = vptr->options.numrx * sizeof(struct rx_desc) +
- vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
-@@ -1013,6 +1057,7 @@ static inline void velocity_give_many_rx
- struct mac_regs __iomem *regs = vptr->mac_regs;
- int avail, dirty, unusable;
-
-+ HAIL("velocity_give_many_rx_descs");
- /*
- * RD number must be equal to 4X per hardware spec
- * (programming guide rev 1.20, p.13)
-@@ -1026,7 +1071,8 @@ static inline void velocity_give_many_rx
- dirty = vptr->rd_dirty - unusable;
- for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
- dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
-- vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC;
-+ /* vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; BE */
-+ vptr->rd_ring[dirty].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
- }
-
- writew(vptr->rd_filled & 0xfffc, &regs->RBRDU);
-@@ -1036,12 +1082,14 @@ static inline void velocity_give_many_rx
- static int velocity_rx_refill(struct velocity_info *vptr)
- {
- int dirty = vptr->rd_dirty, done = 0, ret = 0;
-+ HAIL("velocity_rx_refill");
-
- do {
- struct rx_desc *rd = vptr->rd_ring + dirty;
-
- /* Fine for an all zero Rx desc at init time as well */
-- if (rd->rdesc0.owner == OWNED_BY_NIC)
-+ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
-+ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- if (!vptr->rd_info[dirty].skb) {
-@@ -1076,6 +1124,7 @@ static int velocity_init_rd_ring(struct
- unsigned int rsize = sizeof(struct velocity_rd_info) *
- vptr->options.numrx;
-
-+ HAIL("velocity_init_rd_ring");
- vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
- if(vptr->rd_info == NULL)
- goto out;
-@@ -1105,6 +1154,7 @@ static void velocity_free_rd_ring(struct
- {
- int i;
-
-+ HAIL("velocity_free_rd_ring");
- if (vptr->rd_info == NULL)
- return;
-
-@@ -1146,6 +1196,7 @@ static int velocity_init_td_ring(struct
- unsigned int tsize = sizeof(struct velocity_td_info) *
- vptr->options.numtx;
-
-+ HAIL("velocity_init_td_ring");
- /* Init the TD ring entries */
- for (j = 0; j < vptr->num_txq; j++) {
- curr = vptr->td_pool_dma[j];
-@@ -1182,6 +1233,7 @@ static void velocity_free_td_ring_entry(
- struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
- int i;
-
-+ HAIL("velocity_free_td_ring_entry");
- if (td_info == NULL)
- return;
-
-@@ -1211,6 +1263,7 @@ static void velocity_free_td_ring(struct
- {
- int i, j;
-
-+ HAIL("velocity_free_td_ring");
- for (j = 0; j < vptr->num_txq; j++) {
- if (vptr->td_infos[j] == NULL)
- continue;
-@@ -1238,34 +1291,42 @@ static int velocity_rx_srv(struct veloci
- struct net_device_stats *stats = &vptr->stats;
- int rd_curr = vptr->rd_curr;
- int works = 0;
-+ u16 wRSR; /* BE */
-
-+ HAILS("velocity_rx_srv", status);
- do {
- struct rx_desc *rd = vptr->rd_ring + rd_curr;
-
- if (!vptr->rd_info[rd_curr].skb)
- break;
-
-- if (rd->rdesc0.owner == OWNED_BY_NIC)
-+ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */
-+ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- rmb();
-
-+ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
- /*
- * Don't drop CE or RL error frame although RXOK is off
- */
-- if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) {
-+ /* if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { BE */
-+ if ((wRSR & RSR_RXOK) || (!(wRSR & RSR_RXOK) && (wRSR & (RSR_CE | RSR_RL)))) { /* BE */
- if (velocity_receive_frame(vptr, rd_curr) < 0)
- stats->rx_dropped++;
- } else {
-- if (rd->rdesc0.RSR & RSR_CRC)
-+ /* if (rd->rdesc0.RSR & RSR_CRC) BE */
-+ if (wRSR & RSR_CRC) /* BE */
- stats->rx_crc_errors++;
-- if (rd->rdesc0.RSR & RSR_FAE)
-+ /* if (rd->rdesc0.RSR & RSR_FAE) BE */
-+ if (wRSR & RSR_FAE) /* BE */
- stats->rx_frame_errors++;
-
- stats->rx_dropped++;
- }
-
-- rd->inten = 1;
-+ /* rd->inten = 1; BE */
-+ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
-
- vptr->dev->last_rx = jiffies;
-
-@@ -1296,13 +1357,21 @@ static int velocity_rx_srv(struct veloci
-
- static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
- {
-+ u8 bCSM;
-+ HAIL("velocity_rx_csum");
- skb->ip_summed = CHECKSUM_NONE;
-
-- if (rd->rdesc1.CSM & CSM_IPKT) {
-- if (rd->rdesc1.CSM & CSM_IPOK) {
-- if ((rd->rdesc1.CSM & CSM_TCPKT) ||
-- (rd->rdesc1.CSM & CSM_UDPKT)) {
-- if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
-+// if (rd->rdesc1.CSM & CSM_IPKT) {
-+// if (rd->rdesc1.CSM & CSM_IPOK) {
-+// if ((rd->rdesc1.CSM & CSM_TCPKT) ||
-+// (rd->rdesc1.CSM & CSM_UDPKT)) {
-+// if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
-+ bCSM = (u8)(cpu_to_le32(rd->rdesc1) >> 16); /* BE */
-+ if (bCSM & CSM_IPKT) {
-+ if (bCSM & CSM_IPOK) {
-+ if ((bCSM & CSM_TCPKT) ||
-+ (bCSM & CSM_UDPKT)) {
-+ if (!(bCSM & CSM_TUPOK)) { /* BE */
- return;
- }
- }
-@@ -1328,9 +1397,11 @@ static inline int velocity_rx_copy(struc
- {
- int ret = -1;
-
-+ HAIL("velocity_rx_copy");
- if (pkt_size < rx_copybreak) {
- struct sk_buff *new_skb;
-
-+ HAIL("velocity_rx_copy (working...)");
- new_skb = dev_alloc_skb(pkt_size + 2);
- if (new_skb) {
- new_skb->dev = vptr->dev;
-@@ -1360,10 +1431,12 @@ static inline int velocity_rx_copy(struc
- static inline void velocity_iph_realign(struct velocity_info *vptr,
- struct sk_buff *skb, int pkt_size)
- {
-+ HAIL("velocity_iph_realign");
- /* FIXME - memmove ? */
- if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
- int i;
-
-+ HAIL("velocity_iph_realign (working...)");
- for (i = pkt_size; i >= 0; i--)
- *(skb->data + i + 2) = *(skb->data + i);
- skb_reserve(skb, 2);
-@@ -1382,19 +1455,27 @@ static inline void velocity_iph_realign(
- static int velocity_receive_frame(struct velocity_info *vptr, int idx)
- {
- void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
-+ u16 pkt_len; /* BE */
-+ u16 wRSR; /* BE */
-+ struct sk_buff *skb;
- struct net_device_stats *stats = &vptr->stats;
- struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
- struct rx_desc *rd = &(vptr->rd_ring[idx]);
-- int pkt_len = rd->rdesc0.len;
-- struct sk_buff *skb;
-+ /* int pkt_len = rd->rdesc0.len BE */;
-+
-+ pkt_len = ((cpu_to_le32(rd->rdesc0) >> 16) & 0x00003FFFUL); /* BE */
-+ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */
-
-- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
-+ HAIL("velocity_receive_frame");
-+ /* if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { BE */
-+ if (wRSR & (RSR_STP | RSR_EDP)) { /* BE */
- VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
- stats->rx_length_errors++;
- return -EINVAL;
- }
-
-- if (rd->rdesc0.RSR & RSR_MAR)
-+ /* if (rd->rdesc0.RSR & RSR_MAR) BE */
-+ if (wRSR & RSR_MAR) /* BE */
- vptr->stats.multicast++;
-
- skb = rd_info->skb;
-@@ -1408,7 +1489,8 @@ static int velocity_receive_frame(struct
- */
-
- if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
-- if (rd->rdesc0.RSR & RSR_RL) {
-+ /* if (rd->rdesc0.RSR & RSR_RL) { BE */
-+ if (wRSR & RSR_RL) { /* BE */
- stats->rx_length_errors++;
- return -EINVAL;
- }
-@@ -1452,6 +1534,7 @@ static int velocity_alloc_rx_buf(struct
- struct rx_desc *rd = &(vptr->rd_ring[idx]);
- struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
-
-+ HAIL("velocity_alloc_rx_buf");
- rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64);
- if (rd_info->skb == NULL)
- return -ENOMEM;
-@@ -1469,10 +1552,14 @@ static int velocity_alloc_rx_buf(struct
- */
-
- *((u32 *) & (rd->rdesc0)) = 0;
-- rd->len = cpu_to_le32(vptr->rx_buf_sz);
-- rd->inten = 1;
-+ /* rd->len = cpu_to_le32(vptr->rx_buf_sz); BE */
-+ /* rd->inten = 1; BE */
- rd->pa_low = cpu_to_le32(rd_info->skb_dma);
-- rd->pa_high = 0;
-+ /* rd->pa_high = 0; BE */
-+ rd->ltwo &= cpu_to_le32(0xC000FFFFUL); /* BE */
-+ rd->ltwo |= cpu_to_le32((vptr->rx_buf_sz << 16)); /* BE */
-+ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */
-+ rd->ltwo &= cpu_to_le32(0xFFFF0000UL); /* BE */
- return 0;
- }
-
-@@ -1493,9 +1580,11 @@ static int velocity_tx_srv(struct veloci
- int full = 0;
- int idx;
- int works = 0;
-+ u16 wTSR; /* BE */
- struct velocity_td_info *tdinfo;
- struct net_device_stats *stats = &vptr->stats;
-
-+ HAILS("velocity_tx_srv", status);
- for (qnum = 0; qnum < vptr->num_txq; qnum++) {
- for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
- idx = (idx + 1) % vptr->options.numtx) {
-@@ -1506,22 +1595,29 @@ static int velocity_tx_srv(struct veloci
- td = &(vptr->td_rings[qnum][idx]);
- tdinfo = &(vptr->td_infos[qnum][idx]);
-
-- if (td->tdesc0.owner == OWNED_BY_NIC)
-+ /* if (td->tdesc0.owner == OWNED_BY_NIC) BE */
-+ if (td->tdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */
- break;
-
- if ((works++ > 15))
- break;
-
-- if (td->tdesc0.TSR & TSR0_TERR) {
-+ wTSR = (u16)cpu_to_le32(td->tdesc0);
-+ /* if (td->tdesc0.TSR & TSR0_TERR) { BE */
-+ if (wTSR & TSR0_TERR) { /* BE */
- stats->tx_errors++;
- stats->tx_dropped++;
-- if (td->tdesc0.TSR & TSR0_CDH)
-+ /* if (td->tdesc0.TSR & TSR0_CDH) BE */
-+ if (wTSR & TSR0_CDH) /* BE */
- stats->tx_heartbeat_errors++;
-- if (td->tdesc0.TSR & TSR0_CRS)
-+ /* if (td->tdesc0.TSR & TSR0_CRS) BE */
-+ if (wTSR & TSR0_CRS) /* BE */
- stats->tx_carrier_errors++;
-- if (td->tdesc0.TSR & TSR0_ABT)
-+ /* if (td->tdesc0.TSR & TSR0_ABT) BE */
-+ if (wTSR & TSR0_ABT) /* BE */
- stats->tx_aborted_errors++;
-- if (td->tdesc0.TSR & TSR0_OWC)
-+ /* if (td->tdesc0.TSR & TSR0_OWC) BE */
-+ if (wTSR & TSR0_OWC) /* BE */
- stats->tx_window_errors++;
- } else {
- stats->tx_packets++;
-@@ -1610,6 +1706,7 @@ static void velocity_print_link_status(s
-
- static void velocity_error(struct velocity_info *vptr, int status)
- {
-+ HAILS("velocity_error", status);
-
- if (status & ISR_TXSTLI) {
- struct mac_regs __iomem * regs = vptr->mac_regs;
-@@ -1699,6 +1796,7 @@ static void velocity_free_tx_buf(struct
- struct sk_buff *skb = tdinfo->skb;
- int i;
-
-+ HAIL("velocity_free_tx_buf");
- /*
- * Don't unmap the pre-allocated tx_bufs
- */
-@@ -1902,6 +2000,7 @@ static int velocity_xmit(struct sk_buff
- struct velocity_td_info *tdinfo;
- unsigned long flags;
- int index;
-+ u32 lbufsz; /* BE */
-
- int pktlen = skb->len;
-
-@@ -1918,9 +2017,18 @@ static int velocity_xmit(struct sk_buff
- td_ptr = &(vptr->td_rings[qnum][index]);
- tdinfo = &(vptr->td_infos[qnum][index]);
-
-- td_ptr->tdesc1.TCPLS = TCPLS_NORMAL;
-- td_ptr->tdesc1.TCR = TCR0_TIC;
-- td_ptr->td_buf[0].queue = 0;
-+ td_ptr->tdesc0 = 0x00000000UL; /* BE */
-+ td_ptr->tdesc1 = 0x00000000UL; /* BE */
-+
-+ /* td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0xfcffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)TCPLS_NORMAL) << 24); /* BE */
-+
-+ /* td_ptr->tdesc1.TCR = TCR0_TIC; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TIC); /* BE */
-+
-+ /* td_ptr->td_buf[0].queue = 0; BE */
-+ td_ptr->td_buf[0].ltwo &= cpu_to_le32(~BE_QUEUE_ENABLE); /* BE */
-
- /*
- * Pad short frames.
-@@ -1932,20 +2040,35 @@ static int velocity_xmit(struct sk_buff
- memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len);
- tdinfo->skb = skb;
- tdinfo->skb_dma[0] = tdinfo->buf_dma;
-- td_ptr->tdesc0.pktsize = pktlen;
-+ /* td_ptr->tdesc0.pktsize = pktlen; */
-+ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
-+ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
-+ lbufsz = lbufsz << 16; /* BE - shift over */
-+ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-- td_ptr->td_buf[0].pa_high = 0;
-- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
-+ /* td_ptr->td_buf[0].pa_high = 0; */
-+ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; */
-+ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */
- tdinfo->nskb_dma = 1;
-- td_ptr->tdesc1.CMDZ = 2;
-+ /* td_ptr->tdesc1.CMDZ = 2; */
-+ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28); /* BE */
- } else
- #ifdef VELOCITY_ZERO_COPY_SUPPORT
-+ /*
-+ * BE - NOTE on the VELOCITY_ZERO_COPY_SUPPORT:
-+ * This block of code has NOT been patched up for BE support, as
-+ * it is certainly broken -- if it compiles at all. Since the BE
-+ * fixes depend on the broken code, attempts to convert to BE support
-+ * would almost certainly confuse more than help.
-+ */
- if (skb_shinfo(skb)->nr_frags > 0) {
- int nfrags = skb_shinfo(skb)->nr_frags;
- tdinfo->skb = skb;
- if (nfrags > 6) {
- memcpy(tdinfo->buf, skb->data, skb->len);
- tdinfo->skb_dma[0] = tdinfo->buf_dma;
-+ /* BE: Er, exactly what value are we assigning in this next line? */
- td_ptr->tdesc0.pktsize =
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
- td_ptr->td_buf[0].pa_high = 0;
-@@ -1962,6 +2085,7 @@ static int velocity_xmit(struct sk_buff
- /* FIXME: support 48bit DMA later */
- td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
- td_ptr->td_buf[i].pa_high = 0;
-+ /* BE: This next line can't be right: */
- td_ptr->td_buf[i].bufsize = skb->len->skb->data_len;
-
- for (i = 0; i < nfrags; i++) {
-@@ -1979,7 +2103,7 @@ static int velocity_xmit(struct sk_buff
- }
-
- } else
--#endif
-+#endif /* (broken) VELOCITY_ZERO_COPY_SUPPORT */
- {
- /*
- * Map the linear network buffer into PCI space and
-@@ -1987,19 +2111,30 @@ static int velocity_xmit(struct sk_buff
- */
- tdinfo->skb = skb;
- tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
-- td_ptr->tdesc0.pktsize = pktlen;
-+ /* td_ptr->tdesc0.pktsize = pktlen; BE */
-+ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */
-+ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */
-+ lbufsz = lbufsz << 16; /* BE */
-+ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */
- td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-- td_ptr->td_buf[0].pa_high = 0;
-- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
-+ /* td_ptr->td_buf[0].pa_high = 0; BE */
-+ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; BE */
-+ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */
-+
- tdinfo->nskb_dma = 1;
-- td_ptr->tdesc1.CMDZ = 2;
-+ /* td_ptr->tdesc1.CMDZ = 2; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28);/* BE */
- }
-
- if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
-- td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff);
-- td_ptr->tdesc1.pqinf.priority = 0;
-- td_ptr->tdesc1.pqinf.CFI = 0;
-- td_ptr->tdesc1.TCR |= TCR0_VETAG;
-+ /* td_ptr->tdesc1.pqinf.priority = 0; BE */
-+ /* td_ptr->tdesc1.pqinf.CFI = 0; BE */
-+ td_ptr->tdesc1 &= cpu_to_le32(0xFFFF0000UL); /* BE */
-+ /* td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); BE */
-+ td_ptr->tdesc1 |= cpu_to_le32((vptr->options.vid & 0xfff)); /* BE */
-+ /* td_ptr->tdesc1.TCR |= TCR0_VETAG; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_VETAG); /* BE */
- }
-
- /*
-@@ -2009,26 +2144,34 @@ static int velocity_xmit(struct sk_buff
- && (skb->ip_summed == CHECKSUM_PARTIAL)) {
- struct iphdr *ip = skb->nh.iph;
- if (ip->protocol == IPPROTO_TCP)
-- td_ptr->tdesc1.TCR |= TCR0_TCPCK;
-+ /* td_ptr->tdesc1.TCR |= TCR0_TCPCK; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TCPCK); /* BE */
- else if (ip->protocol == IPPROTO_UDP)
-- td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
-- td_ptr->tdesc1.TCR |= TCR0_IPCK;
-- }
-+ /* td_ptr->tdesc1.TCR |= (TCR0_UDPCK); BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_UDPCK); /* BE */
-+ /* td_ptr->tdesc1.TCR |= TCR0_IPCK; BE */
-+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_IPCK); /* BE */
-+ }
- {
-
- int prev = index - 1;
-
- if (prev < 0)
- prev = vptr->options.numtx - 1;
-- td_ptr->tdesc0.owner = OWNED_BY_NIC;
-+ /* td_ptr->tdesc0.owner = OWNED_BY_NIC; BE */
-+ td_ptr->tdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */
- vptr->td_used[qnum]++;
- vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
-
- if (AVAIL_TD(vptr, qnum) < 1)
- netif_stop_queue(dev);
-
-- td_ptr = &(vptr->td_rings[qnum][prev]);
-- td_ptr->td_buf[0].queue = 1;
-+ td_ptr = &(vptr->td_rings[qnum][prev]);
-+ /* td_ptr->td_buf[0].queue = 1; BE */
-+ td_ptr->td_buf[0].ltwo |= cpu_to_le32(BE_QUEUE_ENABLE); /* BE */
-+ if (vdebug&2) printk(KERN_NOTICE "velocity_xmit: (%s) len=%d idx=%d tdesc0=0x%x tdesc1=0x%x ltwo=0x%x\n",
-+ (pktlen<ETH_ZLEN) ? "short" : "normal", pktlen, index,
-+ td_ptr->tdesc0, td_ptr->tdesc1, td_ptr->td_buf[0].ltwo);
- mac_tx_queue_wake(vptr->mac_regs, qnum);
- }
- dev->trans_start = jiffies;
-@@ -2054,7 +2197,7 @@ static int velocity_intr(int irq, void *
- u32 isr_status;
- int max_count = 0;
-
--
-+ HAIL("velocity_intr");
- spin_lock(&vptr->lock);
- isr_status = mac_read_isr(vptr->mac_regs);
-
-@@ -2073,7 +2216,10 @@ static int velocity_intr(int irq, void *
-
- while (isr_status != 0) {
- mac_write_isr(vptr->mac_regs, isr_status);
-- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
-+ HAILS("velocity_intr",isr_status);
-+ /* MJW - velocity_error is ALWAYS called; need to mask off some other flags */
-+ /* if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) */
-+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI | ISR_PTX0I | ISR_ISR0)))
- velocity_error(vptr, isr_status);
- if (isr_status & (ISR_PRXI | ISR_PPRXI))
- max_count += velocity_rx_srv(vptr, isr_status);
-@@ -2111,6 +2257,7 @@ static void velocity_set_multi(struct ne
- int i;
- struct dev_mc_list *mclist;
-
-+ HAIL("velocity_set_multi");
- if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
- writel(0xffffffff, &regs->MARCAM[0]);
- writel(0xffffffff, &regs->MARCAM[4]);
-@@ -2154,6 +2301,7 @@ static struct net_device_stats *velocity
- {
- struct velocity_info *vptr = netdev_priv(dev);
-
-+ HAIL("net_device_stats");
- /* If the hardware is down, don't touch MII */
- if(!netif_running(dev))
- return &vptr->stats;
-@@ -2198,6 +2346,7 @@ static int velocity_ioctl(struct net_dev
- struct velocity_info *vptr = netdev_priv(dev);
- int ret;
-
-+ HAIL("velocity_ioctl");
- /* If we are asked for information and the device is power
- saving then we need to bring the device back up to talk to it */
-
-@@ -2416,6 +2565,7 @@ static int velocity_mii_read(struct mac_
- {
- u16 ww;
-
-+ HAIL("velocity_mii_read");
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
-@@ -2452,6 +2602,7 @@ static int velocity_mii_write(struct mac
- {
- u16 ww;
-
-+ HAIL("velocity_mii_write");
- /*
- * Disable MIICR_MAUTO, so that mii addr can be set normally
- */
-Index: linux-2.6.21.7/drivers/net/via-velocity.h
-===================================================================
---- linux-2.6.21.7.orig/drivers/net/via-velocity.h
-+++ linux-2.6.21.7/drivers/net/via-velocity.h
-@@ -196,64 +196,70 @@
- * Receive descriptor
- */
-
--struct rdesc0 {
-- u16 RSR; /* Receive status */
-- u16 len:14; /* Received packet length */
-- u16 reserved:1;
-- u16 owner:1; /* Who owns this buffer ? */
--};
--
--struct rdesc1 {
-- u16 PQTAG;
-- u8 CSM;
-- u8 IPKT;
--};
-+//struct rdesc0 {
-+// u16 RSR; /* Receive status */
-+// u16 len:14; /* Received packet length */
-+// u16 reserved:1;
-+// u16 owner:1; /* Who owns this buffer ? */
-+//};
-+
-+//struct rdesc1 {
-+// u16 PQTAG;
-+// u8 CSM;
-+// u8 IPKT;
-+//};
-
- struct rx_desc {
-- struct rdesc0 rdesc0;
-- struct rdesc1 rdesc1;
-+// struct rdesc0 rdesc0;
-+// struct rdesc1 rdesc1;
-+ u32 rdesc0;
-+ u32 rdesc1;
- u32 pa_low; /* Low 32 bit PCI address */
-- u16 pa_high; /* Next 16 bit PCI address (48 total) */
-- u16 len:15; /* Frame size */
-- u16 inten:1; /* Enable interrupt */
-+// u16 pa_high; /* Next 16 bit PCI address (48 total) */
-+// u16 len:15; /* Frame size */
-+// u16 inten:1; /* Enable interrupt */
-+ u32 ltwo;
- } __attribute__ ((__packed__));
-
- /*
- * Transmit descriptor
- */
-
--struct tdesc0 {
-- u16 TSR; /* Transmit status register */
-- u16 pktsize:14; /* Size of frame */
-- u16 reserved:1;
-- u16 owner:1; /* Who owns the buffer */
--};
--
--struct pqinf { /* Priority queue info */
-- u16 VID:12;
-- u16 CFI:1;
-- u16 priority:3;
--} __attribute__ ((__packed__));
--
--struct tdesc1 {
-- struct pqinf pqinf;
-- u8 TCR;
-- u8 TCPLS:2;
-- u8 reserved:2;
-- u8 CMDZ:4;
--} __attribute__ ((__packed__));
-+//struct tdesc0 {
-+// u16 TSR; /* Transmit status register */
-+// u16 pktsize:14; /* Size of frame */
-+// u16 reserved:1;
-+// u16 owner:1; /* Who owns the buffer */
-+//};
-+
-+//struct pqinf { /* Priority queue info */
-+// u16 VID:12;
-+// u16 CFI:1;
-+// u16 priority:3;
-+//} __attribute__ ((__packed__));
-+
-+//struct tdesc1 {
-+// struct pqinf pqinf;
-+// u8 TCR;
-+// u8 TCPLS:2;
-+// u8 reserved:2;
-+// u8 CMDZ:4;
-+//} __attribute__ ((__packed__));
-
- struct td_buf {
- u32 pa_low;
-- u16 pa_high;
-- u16 bufsize:14;
-- u16 reserved:1;
-- u16 queue:1;
-+// u16 pa_high;
-+// u16 bufsize:14;
-+// u16 reserved:1;
-+// u16 queue:1;
-+ u32 ltwo;
- } __attribute__ ((__packed__));
-
- struct tx_desc {
-- struct tdesc0 tdesc0;
-- struct tdesc1 tdesc1;
-+// struct tdesc0 tdesc0;
-+// struct tdesc1 tdesc1;
-+ u32 tdesc0;
-+ u32 tdesc1;
- struct td_buf td_buf[7];
- };
-
-@@ -279,6 +285,16 @@ enum velocity_owner {
- OWNED_BY_NIC = 1
- };
-
-+/* Constants added for the BE fixes */
-+#define BE_OWNED_BY_NIC 0x80000000UL
-+#define BE_INT_ENABLE 0x80000000UL
-+#define BE_QUEUE_ENABLE 0x80000000UL
-+#define BE_TCR_TIC 0x00800000UL
-+#define BE_TCR_VETAG 0x00200000UL
-+#define BE_TCR_TCPCK 0x00040000UL
-+#define BE_TCR_UDPCK 0x00080000UL
-+#define BE_TCR_IPCK 0x00100000UL
-+
-
- /*
- * MAC registers and macros.
-@@ -1698,6 +1714,7 @@ enum velocity_flow_cntl_type {
- };
-
- struct velocity_opt {
-+ int velo_debug; /* debug flag */
- int numrx; /* Number of RX descriptors */
- int numtx; /* Number of TX descriptors */
- enum speed_opt spd_dpx; /* Media link mode */
diff --git a/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch b/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch
deleted file mode 100644
index 59d3e702fb..0000000000
--- a/target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -20,6 +20,7 @@
- #include <linux/leds.h>
- #include <linux/mtd/mtd.h>
-
-+#include <asm/setup.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-@@ -253,11 +254,41 @@ static void __init nslu2_init(void)
- register_mtd_user(&nslu2_flash_notifier);
- }
-
-+static char nslu2_rtc_probe[] __initdata = "rtc-x1205.probe=0,0x6f ";
-+
-+static void __init nslu2_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p,
-+ COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- MACHINE_START(NSLU2, "Linksys NSLU2")
- /* Maintainer: www.nslu2-linux.org */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
- .boot_params = 0x00000100,
-+ .fixup = nslu2_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &nslu2_timer,
diff --git a/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch b/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch
deleted file mode 100644
index f15b64f5f4..0000000000
--- a/target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/leds.h>
- #include <linux/mtd/mtd.h>
-
-+#include <asm/setup.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-@@ -227,11 +228,42 @@ static void __init nas100d_init(void)
- register_mtd_user(&nas100d_flash_notifier);
- }
-
-+static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
-+
-+static void __init nas100d_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size =
-+ (sizeof (struct tag_header) +
-+ strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p,
-+ COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- MACHINE_START(NAS100D, "Iomega NAS 100d")
- /* Maintainer: www.nslu2-linux.org */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
- .boot_params = 0x00000100,
-+ .fixup = nas100d_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
diff --git a/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch b/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch
deleted file mode 100644
index 8993a9e17b..0000000000
--- a/target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -15,6 +15,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-
-+#include <asm/setup.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-@@ -142,6 +143,36 @@ static struct sys_timer dsmg600_timer =
- .init = dsmg600_timer_init,
- };
-
-+static char dsmg600_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 ";
-+
-+static void __init dsmg600_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size =
-+ (sizeof (struct tag_header) +
-+ strlen(dsmg600_rtc_probe) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, dsmg600_rtc_probe, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(dsmg600_rtc_probe), p,
-+ COMMAND_LINE_SIZE - strlen(dsmg600_rtc_probe));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
- static void __init dsmg600_init(void)
- {
- ixp4xx_sys_init();
-@@ -174,6 +205,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
- .boot_params = 0x00000100,
-+ .fixup = dsmg600_fixup,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &dsmg600_timer,
diff --git a/target/linux/ixp4xx/patches/200-gateway_7001.patch b/target/linux/ixp4xx/patches/200-gateway_7001.patch
deleted file mode 100644
index 509b24a248..0000000000
--- a/target/linux/ixp4xx/patches/200-gateway_7001.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/boot/compressed/head-xscale.S
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/boot/compressed/head-xscale.S
-+++ linux-2.6.21.7/arch/arm/boot/compressed/head-xscale.S
-@@ -46,6 +46,11 @@ __XScale_start:
- orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
-
-+#ifdef CONFIG_MACH_GATEWAY7001
-+ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
-+ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
-+#endif
-+
- #ifdef CONFIG_ARCH_IXP2000
- mov r1, #-1
- mov r0, #0xd6000000
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
-+ *
-+ * PCI setup routines for Gateway 7001
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init gateway7001_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else return -1;
-+}
-+
-+struct hw_pci gateway7001_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = gateway7001_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = gateway7001_map_irq,
-+};
-+
-+int __init gateway7001_pci_init(void)
-+{
-+ if (machine_is_gateway7001())
-+ pci_common_init(&gateway7001_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(gateway7001_pci_init);
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/gateway7001-setup.c
-+ *
-+ * Board setup for the Gateway 7001 board
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data gateway7001_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource gateway7001_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device gateway7001_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gateway7001_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &gateway7001_flash_resource,
-+};
-+
-+static struct resource gateway7001_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port gateway7001_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device gateway7001_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = gateway7001_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &gateway7001_uart_resource,
-+};
-+
-+static struct platform_device *gateway7001_devices[] __initdata = {
-+ &gateway7001_flash,
-+ &gateway7001_uart
-+};
-+
-+static void __init gateway7001_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-+}
-+
-+#ifdef CONFIG_MACH_GATEWAY7001
-+MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = gateway7001_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -41,6 +41,14 @@ config ARCH_ADI_COYOTE
- Engineering Coyote Gateway Reference Platform. For more
- information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_GATEWAY7001
-+ bool "Gateway 7001"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Gateway's
-+ 7001 Access Point. For more information on this platform,
-+ see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -13,6 +13,7 @@ obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx
- obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
-+obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-
- obj-y += common.o
-
-@@ -24,5 +25,6 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-
- obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
-+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -38,9 +38,9 @@ static void flush(void)
- static __inline__ void __arch_decomp_setup(unsigned long arch_id)
- {
- /*
-- * Coyote and gtwx5715 only have UART2 connected
-+ * Some boards are using UART2 as console
- */
-- if (machine_is_adi_coyote() || machine_is_gtwx5715())
-+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch b/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch
deleted file mode 100644
index fb84d51376..0000000000
--- a/target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -76,9 +76,57 @@ static struct platform_device gateway700
- .resource = &gateway7001_uart_resource,
- };
-
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 1,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 2,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+ .rxdoneq_id = 5,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
-- &gateway7001_uart
-+ &gateway7001_uart,
-+ &mac0,
-+ &mac1,
- };
-
- static void __init gateway7001_init(void)
diff --git a/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch b/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch
deleted file mode 100644
index 2e24f6cead..0000000000
--- a/target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -16,6 +16,7 @@
- #include <linux/device.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
-+#include <linux/mtd/mtd.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-
-@@ -122,11 +123,48 @@ static struct platform_device mac1 = {
- .resource = &res_mac1,
- };
-
-+struct npe_ucode_platform_data gateway7001_npe_ucode_data = {
-+ .mtd_partition = "microcode",
-+};
-+
-+static struct platform_device gateway7001_npe_ucode = {
-+ .name = "ixp4xx_npe_ucode",
-+ .id = 0,
-+ .dev.platform_data = &gateway7001_npe_ucode_data,
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
- &gateway7001_uart,
- &mac0,
- &mac1,
-+ &gateway7001_npe_ucode,
-+};
-+
-+static void gateway7001_flash_add(struct mtd_info *mtd)
-+{
-+ if (strcmp(mtd->name, "RedBoot config") == 0) {
-+ size_t retlen;
-+ u_char mac0[6], mac1[6];
-+ if (mtd->read(mtd, 0x0422, 6, &retlen, mac0) == 0 && retlen == 6) {
-+ printk(KERN_INFO "gateway 7001 mac0: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac0[0], mac0[1], mac0[2], mac0[3], mac0[4], mac0[5]);
-+ memcpy(plat_mac0.hwaddr, mac0, 6);
-+ }
-+ if (mtd->read(mtd, 0x043B, 6, &retlen, mac1) == 0 && retlen == 6) {
-+ printk(KERN_INFO "gateway 7001 mac1: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac1[0], mac1[1], mac1[2], mac1[3], mac1[4], mac1[5]);
-+ memcpy(plat_mac1.hwaddr, mac1, 6);
-+ }
-+ }
-+}
-+
-+static void gateway7001_flash_remove(struct mtd_info *mtd) {
-+}
-+
-+static struct mtd_notifier gateway7001_flash_notifier = {
-+ .add = gateway7001_flash_add,
-+ .remove = gateway7001_flash_remove,
- };
-
- static void __init gateway7001_init(void)
-@@ -140,6 +178,7 @@ static void __init gateway7001_init(void
- *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
- platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-+ register_mtd_user(&gateway7001_flash_notifier);
- }
-
- #ifdef CONFIG_MACH_GATEWAY7001
diff --git a/target/linux/ixp4xx/patches/300-wg302v2.patch b/target/linux/ixp4xx/patches/300-wg302v2.patch
deleted file mode 100644
index e0f0c21f69..0000000000
--- a/target/linux/ixp4xx/patches/300-wg302v2.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
-+config MACH_WG302V2
-+ bool "Netgear WG302 v2 / WAG302 v2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Netgear's
-+ WG302 v2 or WAG302 v2 Access Points. For more information
-+ on this platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-+obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
-
- obj-y += common.o
-
-@@ -26,5 +27,6 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-+obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/wg302v2-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/wg302v2-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wg302v2-pci.c
-+ *
-+ * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
-+ *
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wg302v2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO9;
-+ else return -1;
-+}
-+
-+struct hw_pci wg302v2_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wg302v2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wg302v2_map_irq,
-+};
-+
-+int __init wg302v2_pci_init(void)
-+{
-+ if (machine_is_wg302v2())
-+ pci_common_init(&wg302v2_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wg302v2_pci_init);
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/wg302v2-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -0,0 +1,107 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wg302-setup.c
-+ *
-+ * Board setup for the Netgear WG302 v2 and WAG302 v2
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wg302v2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wg302v2_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wg302v2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wg302v2_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v2_flash_resource,
-+};
-+
-+static struct resource wg302v2_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wg302v2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wg302v2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wg302v2_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v2_uart_resource,
-+};
-+
-+static struct platform_device *wg302v2_devices[] __initdata = {
-+ &wg302v2_flash,
-+ &wg302v2_uart,
-+};
-+
-+static void __init wg302v2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WG302V2
-+MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wg302v2_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -40,7 +40,7 @@ static __inline__ void __arch_decomp_set
- /*
- * Some boards are using UART2 as console
- */
-- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
-+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch b/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch
deleted file mode 100644
index c12c5fe771..0000000000
--- a/target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/wg302v2-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -75,9 +75,33 @@ static struct platform_device wg302v2_ua
- .resource = &wg302v2_uart_resource,
- };
-
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 8,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
- static struct platform_device *wg302v2_devices[] __initdata = {
- &wg302v2_flash,
- &wg302v2_uart,
-+ &mac0,
- };
-
- static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches/400-pronghorn_metro.patch b/target/linux/ixp4xx/patches/400-pronghorn_metro.patch
deleted file mode 100644
index 035ccf6bd1..0000000000
--- a/target/linux/ixp4xx/patches/400-pronghorn_metro.patch
+++ /dev/null
@@ -1,257 +0,0 @@
-Index: linux-2.6.21.7/Documentation/arm/IXP4xx
-===================================================================
---- linux-2.6.21.7.orig/Documentation/arm/IXP4xx
-+++ linux-2.6.21.7/Documentation/arm/IXP4xx
-@@ -111,6 +111,9 @@ http://www.adiengineering.com/productsCo
- the platform has two mini-PCI slots used for 802.11[bga] cards.
- Finally, there is an IDE port hanging off the expansion bus.
-
-+ADI Engineering Pronghorn Metro Platform
-+http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
-+
- Gateworks Avila Network Platform
- http://www.gateworks.com/avila_sbc.htm
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -57,6 +57,14 @@ config MACH_WG302V2
- WG302 v2 or WAG302 v2 Access Points. For more information
- on this platform, see http://openwrt.org
-
-+config MACH_PRONGHORNMETRO
-+ bool "Pronghorn Metro"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Pronghorn Metro Platform. For more
-+ information on this platform, see <file:Documentation/arm/IXP4xx>.
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
-+obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-
- obj-y += common.o
-
-@@ -28,5 +29,6 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-se
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
-+obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
-@@ -0,0 +1,74 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Pronghorn Metro
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init pronghornmetro_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
-+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO4;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 16)
-+ return IRQ_IXP4XX_GPIO1;
-+ else return -1;
-+}
-+
-+struct hw_pci pronghornmetro_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = pronghornmetro_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = pronghornmetro_map_irq,
-+};
-+
-+int __init pronghornmetro_pci_init(void)
-+{
-+ if (machine_is_pronghorn_metro())
-+ pci_common_init(&pronghornmetro_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(pronghornmetro_pci_init);
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+ *
-+ * Board setup for the ADI Engineering Pronghorn Metro
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data pronghornmetro_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource pronghornmetro_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device pronghornmetro_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghornmetro_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghornmetro_flash_resource,
-+};
-+
-+static struct resource pronghornmetro_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port pronghornmetro_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device pronghornmetro_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = pronghornmetro_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghornmetro_uart_resource,
-+};
-+
-+static struct platform_device *pronghornmetro_devices[] __initdata = {
-+ &pronghornmetro_flash,
-+ &pronghornmetro_uart,
-+};
-+
-+static void __init pronghornmetro_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
-+}
-+
-+#ifdef CONFIG_MACH_PRONGHORNMETRO
-+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = pronghornmetro_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -40,7 +40,7 @@ static __inline__ void __arch_decomp_set
- /*
- * Some boards are using UART2 as console
- */
-- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2())
-+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch b/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch
deleted file mode 100644
index 146baa464c..0000000000
--- a/target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -76,9 +76,57 @@ static struct platform_device pronghornm
- .resource = &pronghornmetro_uart_resource,
- };
-
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 0,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 1,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+ .rxdoneq_id = 5,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
- static struct platform_device *pronghornmetro_devices[] __initdata = {
- &pronghornmetro_flash,
- &pronghornmetro_uart,
-+ &mac0,
-+ &mac1,
- };
-
- static void __init pronghornmetro_init(void)
diff --git a/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch b/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch
deleted file mode 100644
index 1308fc1e05..0000000000
--- a/target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -17,6 +17,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/mtd/mtd.h>
- #include <linux/slab.h>
-
- #include <asm/types.h>
-@@ -122,11 +123,34 @@ static struct platform_device mac1 = {
- .resource = &res_mac1,
- };
-
-+struct npe_ucode_platform_data pronghornmetro_npe_ucode_data = {
-+ .mtd_partition = "RedBoot",
-+};
-+
-+static struct platform_device pronghornmetro_npe_ucode = {
-+ .name = "ixp4xx_npe_ucode",
-+ .id = 0,
-+ .dev.platform_data = &pronghornmetro_npe_ucode_data,
-+};
-+
- static struct platform_device *pronghornmetro_devices[] __initdata = {
- &pronghornmetro_flash,
- &pronghornmetro_uart,
- &mac0,
- &mac1,
-+ &pronghornmetro_npe_ucode,
-+};
-+
-+static void pronghornmetro_flash_add(struct mtd_info *mtd)
-+{
-+}
-+
-+static void pronghornmetro_flash_remove(struct mtd_info *mtd) {
-+}
-+
-+static struct mtd_notifier pronghornmetro_flash_notifier = {
-+ .add = pronghornmetro_flash_add,
-+ .remove = pronghornmetro_flash_remove,
- };
-
- static void __init pronghornmetro_init(void)
-@@ -140,6 +164,8 @@ static void __init pronghornmetro_init(v
- *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
- platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
-+
-+ register_mtd_user(&pronghornmetro_flash_notifier);
- }
-
- #ifdef CONFIG_MACH_PRONGHORNMETRO
diff --git a/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch b/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch
deleted file mode 100644
index be5e7a5f98..0000000000
--- a/target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -77,6 +77,35 @@ static struct platform_device pronghornm
- .resource = &pronghornmetro_uart_resource,
- };
-
-+static struct resource pronghornmetro_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO0,
-+ .end = IRQ_IXP4XX_GPIO0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data pronghornmetro_pata_data = {
-+ .cs0_bits = 0xbfff0043,
-+ .cs1_bits = 0xbfff0043,
-+};
-+
-+static struct platform_device pronghornmetro_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &pronghornmetro_pata_data,
-+ .num_resources = ARRAY_SIZE(pronghornmetro_pata_resources),
-+ .resource = pronghornmetro_pata_resources,
-+};
-+
-+
- static struct resource res_mac0 = {
- .start = IXP4XX_EthB_BASE_PHYS,
- .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-@@ -165,6 +194,17 @@ static void __init pronghornmetro_init(v
-
- platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
-
-+ pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&pronghornmetro_pata);
-+
- register_mtd_user(&pronghornmetro_flash_notifier);
- }
-
diff --git a/target/linux/ixp4xx/patches/500-compex.patch b/target/linux/ixp4xx/patches/500-compex.patch
deleted file mode 100644
index 284a892a51..0000000000
--- a/target/linux/ixp4xx/patches/500-compex.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -0,0 +1,120 @@
-+/*
-+ * arch/arm/mach-ixp4xx/compex-setup.c
-+ *
-+ * Ccompex WP18 / NP18A board-setup
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data compex_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource compex_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device compex_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &compex_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &compex_flash_resource,
-+};
-+
-+static struct resource compex_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port compex_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device compex_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = compex_uart_data,
-+ .num_resources = 2,
-+ .resource = compex_uart_resources
-+};
-+
-+static struct platform_device *compex_devices[] __initdata = {
-+ &compex_flash,
-+ &compex_uart
-+};
-+
-+static void __init compex_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ compex_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
-+}
-+
-+#ifdef CONFIG_MACH_COMPEX
-+MACHINE_START(COMPEX, "Compex WP18 / NP18A")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = compex_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465())
-+ machine_is_ixdp465() || machine_is_compex())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
- Engineering Pronghorn Metro Platform. For more
- information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_COMPEX
-+ bool "Compex WP18 / NP18A"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Compex'
-+ WP18 or NP18A boards. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -16,6 +16,7 @@ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg6
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-+obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -30,5 +31,6 @@ obj-$(CONFIG_MACH_DSMG600) += dsmg6
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.21.7/arch/arm/tools/mach-types
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/tools/mach-types
-+++ linux-2.6.21.7/arch/arm/tools/mach-types
-@@ -1278,7 +1278,7 @@ oiab MACH_OIAB OIAB 1269
- smdk6400 MACH_SMDK6400 SMDK6400 1270
- nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
- greenphone MACH_GREENPHONE GREENPHONE 1272
--compex42x MACH_COMPEXWP18 COMPEXWP18 1273
-+compex MACH_COMPEX COMPEX 1273
- xmate MACH_XMATE XMATE 1274
- energizer MACH_ENERGIZER ENERGIZER 1275
- ime1 MACH_IME1 IME1 1276
diff --git a/target/linux/ixp4xx/patches/510-compex_setup_mac.patch b/target/linux/ixp4xx/patches/510-compex_setup_mac.patch
deleted file mode 100644
index d8f73852b8..0000000000
--- a/target/linux/ixp4xx/patches/510-compex_setup_mac.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/compex-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -90,9 +90,57 @@ static struct platform_device compex_uar
- .resource = compex_uart_resources
- };
-
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = -1,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 3,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+ .rxdoneq_id = 5,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
- static struct platform_device *compex_devices[] __initdata = {
- &compex_flash,
-- &compex_uart
-+ &compex_uart,
-+ &mac0,
-+ &mac1,
- };
-
- static void __init compex_init(void)
diff --git a/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch b/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch
deleted file mode 100644
index c330ed1908..0000000000
--- a/target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/compex-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -17,6 +17,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/mtd/mtd.h>
- #include <linux/slab.h>
-
- #include <asm/types.h>
-@@ -136,11 +137,34 @@ static struct platform_device mac1 = {
- .resource = &res_mac1,
- };
-
-+struct npe_ucode_platform_data compex_npe_ucode_data = {
-+ .mtd_partition = "RedBoot",
-+};
-+
-+static struct platform_device compex_npe_ucode = {
-+ .name = "ixp4xx_npe_ucode",
-+ .id = 0,
-+ .dev.platform_data = &compex_npe_ucode_data,
-+};
-+
- static struct platform_device *compex_devices[] __initdata = {
- &compex_flash,
- &compex_uart,
- &mac0,
- &mac1,
-+ &compex_npe_ucode,
-+};
-+
-+static void compex_flash_add(struct mtd_info *mtd)
-+{
-+}
-+
-+static void compex_flash_remove(struct mtd_info *mtd) {
-+}
-+
-+static struct mtd_notifier compex_flash_notifier = {
-+ .add = compex_flash_add,
-+ .remove = compex_flash_remove,
- };
-
- static void __init compex_init(void)
-@@ -152,6 +176,8 @@ static void __init compex_init(void)
- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
- platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
-+
-+ register_mtd_user(&compex_flash_notifier);
- }
-
- #ifdef CONFIG_MACH_COMPEX
diff --git a/target/linux/ixp4xx/patches/600-wrt300nv2.patch b/target/linux/ixp4xx/patches/600-wrt300nv2.patch
deleted file mode 100644
index 39e1dd0b9e..0000000000
--- a/target/linux/ixp4xx/patches/600-wrt300nv2.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -73,6 +73,14 @@ config MACH_COMPEX
- WP18 or NP18A boards. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_WRT300NV2
-+ bool "Linksys WRT300N v2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys'
-+ WRT300N v2 router. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
- obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-
- obj-y += common.o
-
-@@ -32,5 +33,6 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gatewa
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
- obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
-+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-@@ -0,0 +1,65 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
-+ *
-+ * PCI setup routines for Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wrt300nv2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci wrt300nv2_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wrt300nv2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = wrt300nv2_map_irq,
-+};
-+
-+int __init wrt300nv2_pci_init(void)
-+{
-+ if (machine_is_wrt300nv2())
-+ pci_common_init(&wrt300nv2_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wrt300nv2_pci_init);
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,108 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+ *
-+ * Board setup for the Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wrt300nv2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wrt300nv2_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wrt300nv2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wrt300nv2_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_flash_resource,
-+};
-+
-+static struct resource wrt300nv2_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wrt300nv2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wrt300nv2_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_uart_resource,
-+};
-+
-+static struct platform_device *wrt300nv2_devices[] __initdata = {
-+ &wrt300nv2_flash,
-+ &wrt300nv2_uart
-+};
-+
-+static void __init wrt300nv2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WRT300NV2
-+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = wrt300nv2_init,
-+MACHINE_END
-+#endif
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -40,7 +40,7 @@ static __inline__ void __arch_decomp_set
- /*
- * Some boards are using UART2 as console
- */
-- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro())
-+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro() || machine_is_wrt300nv2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch b/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch
deleted file mode 100644
index bbc76072ce..0000000000
--- a/target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,57 @@ static struct platform_device wrt300nv2_
- .resource = &wrt300nv2_uart_resource,
- };
-
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = -1,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 1,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+ .rxdoneq_id = 5,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
- static struct platform_device *wrt300nv2_devices[] __initdata = {
- &wrt300nv2_flash,
-- &wrt300nv2_uart
-+ &wrt300nv2_uart,
-+ &mac0,
-+ &mac1,
- };
-
- static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches/720-avila_setup_mac.patch b/target/linux/ixp4xx/patches/720-avila_setup_mac.patch
deleted file mode 100644
index 66270f0735..0000000000
--- a/target/linux/ixp4xx/patches/720-avila_setup_mac.patch
+++ /dev/null
@@ -1,70 +0,0 @@
----
- arch/arm/mach-ixp4xx/avila-setup.c | 50 ++++++++++++++++++++++++++++++++++++-
- 1 file changed, 49 insertions(+), 1 deletion(-)
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -132,10 +132,60 @@ static struct platform_device avila_pata
- .resource = avila_pata_resources,
- };
-
-+/* MACs */
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 0,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 1,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+ .rxdoneq_id = 5,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_controller,
- &avila_flash,
-- &avila_uart
-+ &avila_uart,
-+ &mac0,
-+ &mac1,
-+
- };
-
- static void __init avila_init(void)
diff --git a/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch b/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch
deleted file mode 100644
index 87d0892ec8..0000000000
--- a/target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -18,6 +18,10 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#ifdef CONFIG_SENSORS_EEPROM
-+#include <linux/i2c.h>
-+#include <linux/eeprom.h>
-+#endif
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -188,9 +192,34 @@ static struct platform_device *avila_dev
-
- };
-
-+#ifdef CONFIG_SENSORS_EEPROM
-+static int loft_eeprom_do(struct notifier_block *self, unsigned long event, void *t)
-+{
-+ struct eeprom_data *data = t;
-+
-+ char macs[12];
-+
-+ /* The MACs are the first 12 bytes in the eeprom at address 0x51 */
-+ if (event == EEPROM_REGISTER && data->client.addr == 0x51) {
-+ data->attr->read(&data->client.dev.kobj, macs, 0, 12);
-+ memcpy(&plat_mac0.hwaddr, macs, 6);
-+ memcpy(&plat_mac1.hwaddr, macs + 6, 6);
-+ }
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block loft_eeprom_notifier = {
-+ .notifier_call = loft_eeprom_do
-+};
-+#endif
-+
- static void __init avila_init(void)
- {
- ixp4xx_sys_init();
-+#ifdef CONFIG_SENSORS_EEPROM
-+ register_eeprom_notifier(&loft_eeprom_notifier);
-+#endif
-
- avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- avila_flash_resource.end =
diff --git a/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch b/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch
deleted file mode 100644
index 2973a22835..0000000000
--- a/target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -183,13 +183,23 @@ static struct platform_device mac1 = {
- .resource = &res_mac1,
- };
-
-+struct npe_ucode_platform_data avila_npe_ucode_data = {
-+ .mtd_partition = "RedBoot",
-+};
-+
-+static struct platform_device avila_npe_ucode = {
-+ .name = "ixp4xx_npe_ucode",
-+ .id = 0,
-+ .dev.platform_data = &avila_npe_ucode_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_controller,
- &avila_flash,
- &avila_uart,
- &mac0,
- &mac1,
--
-+ &avila_npe_ucode,
- };
-
- #ifdef CONFIG_SENSORS_EEPROM
diff --git a/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch b/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch
deleted file mode 100644
index d10153ef81..0000000000
--- a/target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-Add EEPROM notifiers
-
-These help board level code by allowing a callback when EEPROMs are
-loaded, this permits system level configuration to be loaded from the
-EEPROM. This is particularly useful when the ethernet MAC ids are
-stored in EEPROM and when the ethernet hardware is generic (so it
-has no board level knowledge), then the MACs can be loaded into
-the 'maclist' code and read out by the ethernet config.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-
-Index: linux-2.6.21.7/drivers/i2c/chips/eeprom.c
-===================================================================
---- linux-2.6.21.7.orig/drivers/i2c/chips/eeprom.c
-+++ linux-2.6.21.7/drivers/i2c/chips/eeprom.c
-@@ -33,6 +33,8 @@
- #include <linux/jiffies.h>
- #include <linux/i2c.h>
- #include <linux/mutex.h>
-+#include <linux/notifier.h>
-+#include <linux/eeprom.h>
-
- /* Addresses to scan */
- static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
-@@ -41,26 +43,7 @@ static unsigned short normal_i2c[] = { 0
- /* Insmod parameters */
- I2C_CLIENT_INSMOD_1(eeprom);
-
--
--/* Size of EEPROM in bytes */
--#define EEPROM_SIZE 256
--
--/* possible types of eeprom devices */
--enum eeprom_nature {
-- UNKNOWN,
-- VAIO,
--};
--
--/* Each client has this additional data */
--struct eeprom_data {
-- struct i2c_client client;
-- struct mutex update_lock;
-- u8 valid; /* bitfield, bit!=0 if slice is valid */
-- unsigned long last_updated[8]; /* In jiffies, 8 slices */
-- u8 data[EEPROM_SIZE]; /* Register values */
-- enum eeprom_nature nature;
--};
--
-+ATOMIC_NOTIFIER_HEAD(eeprom_chain);
-
- static int eeprom_attach_adapter(struct i2c_adapter *adapter);
- static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
-@@ -189,6 +172,7 @@ static int eeprom_detect(struct i2c_adap
- data->valid = 0;
- mutex_init(&data->update_lock);
- data->nature = UNKNOWN;
-+ data->attr = &eeprom_attr;
-
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
-@@ -212,6 +196,9 @@ static int eeprom_detect(struct i2c_adap
- if (err)
- goto exit_detach;
-
-+ /* call the notifier chain */
-+ atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
-+
- return 0;
-
- exit_detach:
-@@ -237,6 +224,41 @@ static int eeprom_detach_client(struct i
- return 0;
- }
-
-+/**
-+ * register_eeprom_notifier - register a 'user' of EEPROM devices.
-+ * @nb: pointer to notifier info structure
-+ *
-+ * Registers a callback function to be called upon detection
-+ * of an EEPROM device. Detection invokes the 'add' callback
-+ * with the kobj of the mutex and a bin_attribute which allows
-+ * read from the EEPROM. The intention is that the notifier
-+ * will be able to read system configuration from the notifier.
-+ *
-+ * Only EEPROMs detected *after* the addition of the notifier
-+ * are notified. I.e. EEPROMs already known to the system
-+ * will not be notified - add the notifier from board level
-+ * code!
-+ */
-+int register_eeprom_notifier(struct notifier_block *nb)
-+{
-+ return atomic_notifier_chain_register(&eeprom_chain, nb);
-+}
-+
-+/**
-+ * unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
-+ * @old: pointer to notifier info structure
-+ *
-+ * Removes a callback function from the list of 'users' to be
-+ * notified upon detection of EEPROM devices.
-+ */
-+int unregister_eeprom_notifier(struct notifier_block *nb)
-+{
-+ return atomic_notifier_chain_unregister(&eeprom_chain, nb);
-+}
-+
-+EXPORT_SYMBOL_GPL(register_eeprom_notifier);
-+EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
-+
- static int __init eeprom_init(void)
- {
- return i2c_add_driver(&eeprom_driver);
-Index: linux-2.6.21.7/include/linux/eeprom.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/include/linux/eeprom.h
-@@ -0,0 +1,71 @@
-+#ifndef _LINUX_EEPROM_H
-+#define _LINUX_EEPROM_H
-+/*
-+ * $Id: 45-eeprom-new-notifier.patch,v 1.2 2006/03/27 11:10:19 azummo Exp $
-+ *
-+ * Copyright (C) 2006 John Bowler
-+ */
-+
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __KERNEL__
-+#error This is a kernel header
-+#endif
-+
-+#include <linux/list.h>
-+#include <linux/kobject.h>
-+#include <linux/sysfs.h>
-+
-+/* Size of EEPROM in bytes */
-+#define EEPROM_SIZE 256
-+
-+/* possible types of eeprom devices */
-+enum eeprom_nature {
-+ UNKNOWN,
-+ VAIO,
-+};
-+
-+/* Each client has this additional data */
-+struct eeprom_data {
-+ struct i2c_client client;
-+ struct mutex update_lock;
-+ u8 valid; /* bitfield, bit!=0 if slice is valid */
-+ unsigned long last_updated[8]; /* In jiffies, 8 slices */
-+ u8 data[EEPROM_SIZE]; /* Register values */
-+ enum eeprom_nature nature;
-+ struct bin_attribute *attr;
-+};
-+
-+/*
-+ * This is very basic.
-+ *
-+ * If an EEPROM is detected on the I2C bus (this only works for
-+ * I2C EEPROMs) the notifier chain is called with
-+ * both the I2C information and the kobject for the sysfs
-+ * device which has been registers. It is then possible to
-+ * read from the device via the bin_attribute::read method
-+ * to extract configuration information.
-+ *
-+ * Register the notifier in the board level code, there is no
-+ * need to unregister it but you can if you want (it will save
-+ * a little bit or kernel memory to do so).
-+ */
-+
-+extern int register_eeprom_notifier(struct notifier_block *nb);
-+extern int unregister_eeprom_notifier(struct notifier_block *nb);
-+
-+#endif /* _LINUX_EEPROM_H */
-Index: linux-2.6.21.7/include/linux/notifier.h
-===================================================================
---- linux-2.6.21.7.orig/include/linux/notifier.h
-+++ linux-2.6.21.7/include/linux/notifier.h
-@@ -187,5 +187,8 @@ extern int srcu_notifier_call_chain(stru
- #define CPU_DOWN_FAILED 0x0006 /* CPU (unsigned)v NOT going down */
- #define CPU_DEAD 0x0007 /* CPU (unsigned)v dead */
-
-+/* eeprom notifier chain */
-+#define EEPROM_REGISTER 0x0001
-+
- #endif /* __KERNEL__ */
- #endif /* _LINUX_NOTIFIER_H */
diff --git a/target/linux/ixp4xx/patches/900-no_loader_workaround.patch b/target/linux/ixp4xx/patches/900-no_loader_workaround.patch
deleted file mode 100644
index cb6a531759..0000000000
--- a/target/linux/ixp4xx/patches/900-no_loader_workaround.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/boot/compressed/head-xscale.S
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/boot/compressed/head-xscale.S
-+++ linux-2.6.21.7/arch/arm/boot/compressed/head-xscale.S
-@@ -41,6 +41,7 @@ __XScale_start:
- mov r7, #MACH_TYPE_COTULLA_IDP
- #endif
-
-+/* let the arm-magic.sh script do the dirty work
- #ifdef CONFIG_MACH_GTWX5715
- mov r7, #(MACH_TYPE_GTWX5715 & 0xff)
- orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
-@@ -50,6 +51,7 @@ __XScale_start:
- mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
- orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
- #endif
-+ */
-
- #ifdef CONFIG_ARCH_IXP2000
- mov r1, #-1
diff --git a/target/linux/ixp4xx/patches/996-fsg3_support.patch b/target/linux/ixp4xx/patches/996-fsg3_support.patch
deleted file mode 100644
index 987abdfc71..0000000000
--- a/target/linux/ixp4xx/patches/996-fsg3_support.patch
+++ /dev/null
@@ -1,433 +0,0 @@
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/fsg-pci.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/fsg-pci.c
-@@ -0,0 +1,71 @@
-+/*
-+ * arch/arch/mach-ixp4xx/fsg-pci.c
-+ *
-+ * FSG board-level PCI initialization
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init fsg_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
-+ IRQ_FSG_PCI_INTC,
-+ IRQ_FSG_PCI_INTB,
-+ IRQ_FSG_PCI_INTA,
-+ };
-+
-+ int irq = -1;
-+ slot = slot - 11;
-+
-+ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) {
-+ irq = pci_irq_table[(slot - 1)];
-+ }
-+ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq);
-+
-+ return irq;
-+}
-+
-+struct hw_pci fsg_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = fsg_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = fsg_map_irq,
-+};
-+
-+int __init fsg_pci_init(void)
-+{
-+ if (machine_is_fsg())
-+ pci_common_init(&fsg_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(fsg_pci_init);
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/fsg-setup.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/fsg-setup.c
-@@ -0,0 +1,223 @@
-+/*
-+ * arch/arm/mach-ixp4xx/fsg-setup.c
-+ *
-+ * FSG board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/leds.h>
-+#include <linux/mtd/mtd.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data fsg_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource fsg_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device fsg_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &fsg_flash_data,
-+ .num_resources = 1,
-+ .resource = &fsg_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins fsg_i2c_gpio_pins = {
-+ .sda_pin = FSG_SDA_PIN,
-+ .scl_pin = FSG_SCL_PIN,
-+};
-+
-+static struct platform_device fsg_i2c_controller = {
-+ .name = "IXP4XX-I2C",
-+ .id = 0,
-+ .dev.platform_data = &fsg_i2c_gpio_pins,
-+ .num_resources = 0,
-+};
-+
-+static struct resource fsg_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port fsg_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device fsg_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = fsg_uart_data,
-+ .num_resources = ARRAY_SIZE(fsg_uart_resources),
-+ .resource = fsg_uart_resources,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct resource res_mac0 = {
-+ .start = IXP4XX_EthB_BASE_PHYS,
-+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource res_mac1 = {
-+ .start = IXP4XX_EthC_BASE_PHYS,
-+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct mac_plat_info plat_mac0 = {
-+ .npe_id = 1,
-+ .phy_id = 5,
-+ .eth_id = 0,
-+ .rxq_id = 27,
-+ .txq_id = 24,
-+ .rxdoneq_id = 4,
-+};
-+
-+static struct mac_plat_info plat_mac1 = {
-+ .npe_id = 2,
-+ .phy_id = 4,
-+ .eth_id = 1,
-+ .rxq_id = 28,
-+ .txq_id = 25,
-+ .rxdoneq_id = 5,
-+};
-+
-+static struct platform_device mac0 = {
-+ .name = "ixp4xx_mac",
-+ .id = 0,
-+ .dev.platform_data = &plat_mac0,
-+ .num_resources = 1,
-+ .resource = &res_mac0,
-+};
-+
-+static struct platform_device mac1 = {
-+ .name = "ixp4xx_mac",
-+ .id = 1,
-+ .dev.platform_data = &plat_mac1,
-+ .num_resources = 1,
-+ .resource = &res_mac1,
-+};
-+
-+struct npe_ucode_platform_data fsg_npe_ucode_data = {
-+ .mtd_partition = "microcode",
-+};
-+
-+static struct platform_device fsg_npe_ucode = {
-+ .name = "ixp4xx_npe_ucode",
-+ .id = 0,
-+ .dev.platform_data = &fsg_npe_ucode_data,
-+};
-+
-+static struct platform_device *fsg_devices[] __initdata = {
-+ &fsg_i2c_controller,
-+ &fsg_flash,
-+ &mac0,
-+ &mac1,
-+ &fsg_npe_ucode,
-+};
-+
-+static void fsg_flash_add(struct mtd_info *mtd)
-+{
-+ if (strcmp(mtd->name, "RedBoot config") == 0) {
-+ size_t retlen;
-+ u_char mac[6];
-+
-+ if (mtd->read(mtd, 0x0422, 6, &retlen, mac) == 0 && retlen == 6) {
-+ printk(KERN_INFO "eth0 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+ memcpy(plat_mac0.hwaddr, mac, 6);
-+ mac[5]++;
-+ printk(KERN_INFO "eth1 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+ memcpy(plat_mac1.hwaddr, mac, 6);
-+ } else {
-+ printk(KERN_ERR "fsg mac: read failed\n");
-+ }
-+ }
-+}
-+
-+static void fsg_flash_remove(struct mtd_info *mtd) {
-+}
-+
-+static struct mtd_notifier fsg_flash_notifier = {
-+ .add = fsg_flash_add,
-+ .remove = fsg_flash_remove,
-+};
-+
-+static void __init fsg_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ fsg_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ /* Configure CS2 for operation, 8bit and writable */
-+ *IXP4XX_EXP_CS2 = 0xbfff0002;
-+
-+ /* This is only useful on a modified machine, but it is valuable
-+ * to have it first in order to see debug messages, and so that
-+ * it does *not* get removed if platform_add_devices fails!
-+ */
-+ (void)platform_device_register(&fsg_uart);
-+
-+ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
-+
-+ register_mtd_user(&fsg_flash_notifier);
-+}
-+
-+MACHINE_START(FSG, "Freecom FSG-3")
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = fsg_init,
-+MACHINE_END
-+
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/fsg.h
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/fsg.h
-@@ -0,0 +1,58 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/fsg.h
-+ *
-+ * Freecom FSG-3 platform specific definitions
-+ *
-+ * Author: Rod Whitby <rod@whitby.id.au>
-+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * Based on coyote.h by
-+ * Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define FSG_SDA_PIN 12
-+#define FSG_SCL_PIN 13
-+
-+/*
-+ * FSG PCI IRQs
-+ */
-+#define FSG_PCI_MAX_DEV 3
-+#define FSG_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define FSG_PCI_INTA_PIN 6
-+#define FSG_PCI_INTB_PIN 7
-+#define FSG_PCI_INTC_PIN 5
-+
-+/* Buttons */
-+
-+#define FSG_SB_GPIO 4
-+#define FSG_RB_GPIO 9
-+#define FSG_UB_GPIO 10
-+
-+#define FSG_SB_IRQ IRQ_IXP4XX_GPIO4
-+#define FSG_RB_IRQ IRQ_IXP4XX_GPIO9
-+#define FSG_UB_IRQ IRQ_IXP4XX_GPIO10
-+
-+#define FSG_SB_BM (1L << FSG_SB_GPIO)
-+#define FSG_RB_BM (1L << FSG_RB_GPIO)
-+#define FSG_UB_BM (1L << FSG_UB_GPIO)
-+
-+/* LEDs */
-+
-+#define FSG_LED_RING_BIT 0
-+#define FSG_LED_SYNC_BIT 1
-+#define FSG_LED_USB_BIT 2
-+#define FSG_LED_SATA_BIT 3
-+#define FSG_LED_WAN_BIT 4
-+#define FSG_LED_WLAN_BIT 5
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/hardware.h
-@@ -48,5 +48,6 @@ extern unsigned int processor_id;
- #include "nslu2.h"
- #include "nas100d.h"
- #include "dsmg600.h"
-+#include "fsg.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.21.7/include/asm-arm/arch-ixp4xx/irqs.h
-===================================================================
---- linux-2.6.21.7.orig/include/asm-arm/arch-ixp4xx/irqs.h
-+++ linux-2.6.21.7/include/asm-arm/arch-ixp4xx/irqs.h
-@@ -128,4 +128,11 @@
- #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
- #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
-
-+/*
-+ * Freecom FSG-3 board IRQs
-+ */
-+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
-+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
-+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
-+
- #endif
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -13,6 +13,7 @@ obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx
- obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
-+obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-@@ -29,6 +30,7 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-
- obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
-+obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Kconfig
-@@ -138,6 +138,14 @@ config MACH_DSMG600
- DSM-G600 RevA device. For more information on this platform,
- see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
-
-+config MACH_FSG
-+ bool
-+ prompt "Freecom FSG-3"
-+ help
-+ Say 'Y' here if you want your kernel to support Freecom's
-+ FSG-3 device. For more information on this
-+ platform see http://www.openfsg.com/
-+
- #
- # Avila and IXDP share the same source for now. Will change in future
- #
diff --git a/target/linux/ixp4xx/patches/997-fsg3_buttons.patch b/target/linux/ixp4xx/patches/997-fsg3_buttons.patch
deleted file mode 100644
index 1b8d8cf5ff..0000000000
--- a/target/linux/ixp4xx/patches/997-fsg3_buttons.patch
+++ /dev/null
@@ -1,191 +0,0 @@
----
- arch/arm/mach-ixp4xx/Makefile | 2
- arch/arm/mach-ixp4xx/fsg-power.c | 168 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 169 insertions(+), 1 deletion(-)
-
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/fsg-power.c
-===================================================================
---- /dev/null
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/fsg-power.c
-@@ -0,0 +1,168 @@
-+/*
-+ * arch/arm/mach-ixp4xx/fsg-power.c
-+ *
-+ * FSG buttons driver
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <asm/mach-types.h>
-+#include <linux/kernel.h>
-+
-+struct event_t {
-+ struct work_struct wq;
-+ char *button_name;
-+ int action;
-+};
-+
-+static void hotplug_button(struct event_t *event)
-+{
-+ static char buf[128];
-+ char *argv[3], *envp[6], *action;
-+ int i;
-+
-+ i = 0;
-+ argv[i++] = "/sbin/hotplug";
-+ argv[i++] = "button";
-+ argv[i] = 0;
-+
-+ i = 0;
-+ /* minimal command environment */
-+ envp [i++] = "HOME=/";
-+ envp [i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-+ envp [i++] = "SUBSYSTEM=button";
-+
-+ snprintf(buf, 128, "BUTTON=%s", event->button_name);
-+ envp [i++] = buf;
-+
-+ action = event->action ? "released" : "pressed";
-+ snprintf(buf, 128, "ACTION=%s", action);
-+ envp [i++] = buf;
-+
-+ envp [i] = 0;
-+
-+ // create hotplug event
-+ call_usermodehelper (argv[0], argv, envp, 0);
-+
-+ //destroy event structure
-+ kfree(event);
-+}
-+
-+static irqreturn_t fsg_sync_button_handler(int irq, void *dev_id)
-+{
-+ int holdkey;
-+ struct event_t *event;
-+
-+ //check button status
-+ gpio_line_get(FSG_SB_GPIO, &holdkey);
-+
-+ //create event
-+ if ((event = (struct event_t *)kzalloc (sizeof(struct event_t), GFP_ATOMIC))) {
-+ event->action = holdkey;
-+ event->button_name = "sync";
-+
-+ INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
-+ schedule_work(&event->wq);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t fsg_reset_button_handler(int irq, void *dev_id)
-+{
-+ int holdkey;
-+ struct event_t *event;
-+
-+ //check button status
-+ gpio_line_get(FSG_RB_GPIO, &holdkey);
-+
-+ //create event
-+ if ((event = (struct event_t *)kzalloc (sizeof(struct event_t), GFP_ATOMIC))) {
-+ event->action = holdkey;
-+ event->button_name = "reset";
-+
-+ INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
-+ schedule_work(&event->wq);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t fsg_unplug_button_handler(int irq, void *dev_id)
-+{
-+ int holdkey;
-+ struct event_t *event;
-+
-+ //check button status
-+ gpio_line_get(FSG_UB_GPIO, &holdkey);
-+
-+ //create event
-+ if ((event = (struct event_t *)kzalloc (sizeof(struct event_t), GFP_ATOMIC))) {
-+ event->action = holdkey;
-+ event->button_name = "unplug";
-+
-+ INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
-+ schedule_work(&event->wq);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init fsg_buttons_init(void)
-+{
-+ if (!(machine_is_fsg()))
-+ return 0;
-+
-+ /* Configure interrupt input for SYNC button */
-+ set_irq_type(FSG_SB_IRQ, IRQT_BOTHEDGE);
-+ if (request_irq(FSG_SB_IRQ, &fsg_sync_button_handler, IRQF_DISABLED, "SYNC", NULL) < 0) {
-+ printk(KERN_DEBUG "SYNC button IRQ %d not available\n", FSG_SB_IRQ);
-+ return -EIO;
-+ }
-+ else
-+ printk("SYNC button registered on IRQ%d\n", FSG_SB_IRQ);
-+
-+ /* Configure interrupt input for RESET button */
-+ set_irq_type(FSG_RB_IRQ, IRQT_BOTHEDGE);
-+ if (request_irq(FSG_RB_IRQ, &fsg_reset_button_handler, IRQF_DISABLED, "RESET", NULL) < 0) {
-+ printk(KERN_DEBUG "RESET button IRQ %d not available\n", FSG_RB_IRQ);
-+ return -EIO;
-+ }
-+ else
-+ printk("RESET button registered on IRQ%d\n", FSG_RB_IRQ);
-+
-+ /* Configure interrupt input for UNPLUG button */
-+ set_irq_type(FSG_UB_IRQ, IRQT_BOTHEDGE);
-+ if (request_irq(FSG_UB_IRQ, &fsg_unplug_button_handler, IRQF_DISABLED, "RESET", NULL) < 0) {
-+ printk(KERN_DEBUG "UNPLUG button IRQ %d not available\n", FSG_UB_IRQ);
-+ return -EIO;
-+ }
-+ else
-+ printk("UNPLUG button registered on IRQ%d\n", FSG_UB_IRQ);
-+
-+ return 0;
-+}
-+
-+static void __exit fsg_buttons_exit(void)
-+{
-+ if (!(machine_is_fsg()))
-+ return;
-+
-+ free_irq(FSG_SB_IRQ, NULL);
-+ free_irq(FSG_RB_IRQ, NULL);
-+ free_irq(FSG_UB_IRQ, NULL);
-+}
-+
-+module_init(fsg_buttons_init);
-+module_exit(fsg_buttons_exit);
-+
-+MODULE_AUTHOR("Zintis Petersons <Zintis.Petersons@e-mail.lv>");
-+MODULE_DESCRIPTION("FSG buttons driver");
-+MODULE_LICENSE("GPL");
-Index: linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.21.7.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.21.7/arch/arm/mach-ixp4xx/Makefile
-@@ -30,7 +30,7 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-
- obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
--obj-$(CONFIG_MACH_FSG) += fsg-setup.o
-+obj-$(CONFIG_MACH_FSG) += fsg-setup.o fsg-power.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
diff --git a/target/linux/ixp4xx/patches/998-VT6421.patch b/target/linux/ixp4xx/patches/998-VT6421.patch
deleted file mode 100644
index a7f28e9355..0000000000
--- a/target/linux/ixp4xx/patches/998-VT6421.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-I think that I've found and fixed the problem. There is a copy/paste bug in
-vt6421_set_dma_mode() function which causes wrong values to be written to
-PATA_UDMA_TIMING register.
-
-
-This patch fixes a copy/paste bug that breaks DMA modes on VT6421 PATA port.
-
-Signed-off-by: Ondrej Zary <linux@rain...>
-Index: linux-2.6.21.7/drivers/ata/sata_via.c
-===================================================================
---- linux-2.6.21.7.orig/drivers/ata/sata_via.c
-+++ linux-2.6.21.7/drivers/ata/sata_via.c
-@@ -380,7 +380,7 @@ static void vt6421_set_dma_mode(struct a
- {
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 };
-- pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->pio_mode - XFER_UDMA_0]);
-+ pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]);
- }
-
- static int vt6421_port_start(struct ata_port *ap)