diff options
| -rw-r--r-- | package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch | 695 |
1 files changed, 524 insertions, 171 deletions
diff --git a/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch b/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch index 41b7562137..c2ecf0ccc2 100644 --- a/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch +++ b/package/kernel/mac80211/patches/621-rt2x00-add-support-for-mt7620.patch @@ -23,7 +23,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> #define RF_CSR_CFG_BUSY FIELD32(0x00020000) /* -+ * mt7620 RF registers (reversed order) ++ * MT7620 RF registers (reversed order) + */ +#define RF_CSR_CFG_DATA_MT7620 FIELD32(0x0000ff00) +#define RF_CSR_CFG_REGNUM_MT7620 FIELD32(0x03ff0000) @@ -34,45 +34,238 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> * EFUSE_CSR: RT30x0 EEPROM */ #define EFUSE_CTRL 0x0580 -@@ -1024,6 +1033,11 @@ +@@ -1024,6 +1033,16 @@ #define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) /* -+ * mt7620 ++ * MIMO_PS_CFG: MIMO Power-save Configuration + */ +#define MIMO_PS_CFG 0x1210 ++#define MIMO_PS_CFG_MMPS_BB_EN FIELD32(0x00000001) ++#define MIMO_PS_CFG_MMPS_RX_ANT_NUM FIELD32(0x00000006) ++#define MIMO_PS_CFG_MMPS_RF_EN FIELD32(0x00000008) ++#define MIMO_PS_CFG_RX_STBY_POL FIELD32(0x00000010) ++#define MIMO_PS_CFG_RX_RX_STBY0 FIELD32(0x00000020) + +/* * EDCA_AC0_CFG: */ #define EDCA_AC0_CFG 0x1300 -@@ -1203,6 +1217,8 @@ +@@ -1097,6 +1116,12 @@ + #define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000) + #define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_0B_1MBS_2MBS FIELD32(0x000000ff) ++#define TX_PWR_CFG_0B_5MBS_11MBS FIELD32(0x0000ff00) ++#define TX_PWR_CFG_0B_6MBS_9MBS FIELD32(0x00ff0000) ++#define TX_PWR_CFG_0B_12MBS_18MBS FIELD32(0xff000000) ++ + + /* + * TX_PWR_CFG_1: +@@ -1119,6 +1144,11 @@ + #define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000) + #define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_1B_24MBS_36MBS FIELD32(0x000000ff) ++#define TX_PWR_CFG_1B_48MBS FIELD32(0x0000ff00) ++#define TX_PWR_CFG_1B_MCS0_MCS1 FIELD32(0x00ff0000) ++#define TX_PWR_CFG_1B_MCS2_MCS3 FIELD32(0xff000000) + + /* + * TX_PWR_CFG_2: +@@ -1141,6 +1171,11 @@ + #define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000) + #define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_2B_MCS4_MCS5 FIELD32(0x000000ff) ++#define TX_PWR_CFG_2B_MCS6_MCS7 FIELD32(0x0000ff00) ++#define TX_PWR_CFG_2B_MCS8_MCS9 FIELD32(0x00ff0000) ++#define TX_PWR_CFG_2B_MCS10_MCS11 FIELD32(0xff000000) + + /* + * TX_PWR_CFG_3: +@@ -1163,6 +1198,11 @@ + #define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000) + #define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_3B_MCS12_MCS13 FIELD32(0x000000ff) ++#define TX_PWR_CFG_3B_MCS14 FIELD32(0x0000ff00) ++#define TX_PWR_CFG_3B_STBC_MCS0_MCS1 FIELD32(0x00ff0000) ++#define TX_PWR_CFG_3B_STBC_MCS2_MSC3 FIELD32(0xff000000) + + /* + * TX_PWR_CFG_4: +@@ -1177,6 +1217,10 @@ + #define TX_PWR_CFG_3_STBC4_CH1 FIELD32(0x000000f0) + #define TX_PWR_CFG_3_STBC6_CH0 FIELD32(0x00000f00) + #define TX_PWR_CFG_3_STBC6_CH1 FIELD32(0x0000f000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_4B_STBC_MCS4_MCS5 FIELD32(0x000000ff) ++#define TX_PWR_CFG_4B_STBC_MCS6 FIELD32(0x0000ff00) ++ + + /* + * TX_PIN_CFG: +@@ -1203,6 +1247,8 @@ #define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) #define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) #define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) -+#define TX_PIN_CFG_RFRX_EN FIELD32(0x00100000) /* mt7620 */ -+#define TX_PIN_CFG_RFRX_POL FIELD32(0x00200000) /* mt7620 */ ++#define TX_PIN_CFG_RFRX_EN FIELD32(0x00100000) ++#define TX_PIN_CFG_RFRX_POL FIELD32(0x00200000) #define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000) #define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000) #define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000) -@@ -1549,6 +1565,17 @@ +@@ -1549,6 +1595,95 @@ #define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f) #define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00) -+/* mt7620 */ ++/* TXn_RF_GAIN_CORRECT: RF Gain Correction for each RF_ALC[3:2] ++ * Unit: 0.1 dB, Range: -3.2 dB to 3.1 dB ++ */ +#define TX0_RF_GAIN_CORRECT 0x13a0 ++#define TX0_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f) ++#define TX0_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00) ++#define TX0_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000) ++#define TX0_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000) ++ +#define TX1_RF_GAIN_CORRECT 0x13a4 ++#define TX1_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f) ++#define TX1_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00) ++#define TX1_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000) ++#define TX1_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000) ++ ++/* TXn_RF_GAIN_ATTEN: TXn RF Gain Attenuation Level ++ * Format: 7-bit, signed value ++ * Unit: 0.5 dB, Range: -20 dB to -5 dB ++ */ +#define TX0_RF_GAIN_ATTEN 0x13a8 ++#define TX0_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f) ++#define TX0_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00) ++#define TX0_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000) ++#define TX0_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000) +#define TX1_RF_GAIN_ATTEN 0x13ac -+#define TX_ALG_CFG_0 0x13b0 -+#define TX_ALG_CFG_1 0x13b4 ++#define TX1_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f) ++#define TX1_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00) ++#define TX1_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000) ++#define TX1_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000) ++ ++/* TX_ALC_CFG_0: TX Automatic Level Control Configuration 0 ++ * TX_ALC_LIMIT_n: TXn upper limit ++ * TX_ALC_CH_INIT_n: TXn channel initial transmission gain ++ * Unit: 0.5 dB, Range: 0 to 23.5 dB ++ */ ++#define TX_ALC_CFG_0 0x13b0 ++#define TX_ALC_CFG_0_CH_INIT_0 FIELD32(0x0000003f) ++#define TX_ALC_CFG_0_CH_INIT_1 FIELD32(0x00003f00) ++#define TX_ALC_CFG_0_LIMIT_0 FIELD32(0x003f0000) ++#define TX_ALC_CFG_0_LIMIT_1 FIELD32(0x3f000000) ++ ++/* TX_ALC_CFG_1: TX Automatic Level Control Configuration 1 ++ * TX_TEMP_COMP: TX Power Temperature Compensation ++ * Unit: 0.5 dB, Range: -10 dB to 10 dB ++ * TXn_GAIN_FINE: TXn Gain Fine Adjustment ++ * Unit: 0.1 dB, Range: -0.8 dB to 0.7 dB ++ * RF_TOS_DLY: Sets the RF_TOS_EN assertion delay after ++ * deassertion of PA_PE. ++ * Unit: 0.25 usec ++ * TXn_RF_GAIN_ATTEN: TXn RF gain attentuation selector ++ * RF_TOS_TIMEOUT: time-out value for RF_TOS_ENABLE ++ * deassertion if RF_TOS_DONE is missing. ++ * Unit: 0.25 usec ++ * RF_TOS_ENABLE: TX offset calibration enable ++ * ROS_BUSY_EN: RX offset calibration busy enable ++ */ ++#define TX_ALC_CFG_1 0x13b4 ++#define TX_ALC_CFG_1_TX_TEMP_COMP FIELD32(0x0000003f) ++#define TX_ALC_CFG_1_TX0_GAIN_FINE FIELD32(0x00000f00) ++#define TX_ALC_CFG_1_TX1_GAIN_FINE FIELD32(0x0000f000) ++#define TX_ALC_CFG_1_RF_TOS_DLY FIELD32(0x00070000) ++#define TX_ALC_CFG_1_TX0_RF_GAIN_ATTEN FIELD32(0x00300000) ++#define TX_ALC_CFG_1_TX1_RF_GAIN_ATTEN FIELD32(0x00c00000) ++#define TX_ALC_CFG_1_RF_TOS_TIMEOUT FIELD32(0x3f000000) ++#define TX_ALC_CFG_1_RF_TOS_ENABLE FIELD32(0x40000000) ++#define TX_ALC_CFG_1_ROS_BUSY_EN FIELD32(0x80000000) ++ ++/* TXn_BB_GAIN_ATTEN: TXn RF Gain Attenuation Level ++ * Format: 5-bit signed values ++ * Unit: 0.5 dB, Range: -8 dB to 7 dB ++ */ +#define TX0_BB_GAIN_ATTEN 0x13c0 ++#define TX0_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f) ++#define TX0_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00) ++#define TX0_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000) ++#define TX0_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000) +#define TX1_BB_GAIN_ATTEN 0x13c4 ++#define TX1_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f) ++#define TX1_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00) ++#define TX1_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000) ++#define TX1_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000) ++ ++/* TX_ALC_VGA3: TX Automatic Level Correction Variable Gain Amplifier 3 */ +#define TX_ALC_VGA3 0x13c8 ++#define TX_ALC_VGA3_TX0_ALC_VGA3 FIELD32(0x0000001f) ++#define TX_ALC_VGA3_TX1_ALC_VGA3 FIELD32(0x00001f00) ++#define TX_ALC_VGA3_TX0_ALC_VGA2 FIELD32(0x001f0000) ++#define TX_ALC_VGA3_TX1_ALC_VGA2 FIELD32(0x1f000000) + /* TX_PWR_CFG_7 */ #define TX_PWR_CFG_7 0x13d4 #define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f) +@@ -1557,6 +1692,10 @@ + #define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000) + #define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_7B_54MBS FIELD32(0x000000ff) ++#define TX_PWR_CFG_7B_MCS7 FIELD32(0x00ff0000) ++ + + /* TX_PWR_CFG_8 */ + #define TX_PWR_CFG_8 0x13d8 +@@ -1566,12 +1705,17 @@ + #define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000) + #define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000) + #define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_8B_MCS15 FIELD32(0x000000ff) ++ + + /* TX_PWR_CFG_9 */ + #define TX_PWR_CFG_9 0x13dc + #define TX_PWR_CFG_9_STBC7_CH0 FIELD32(0x0000000f) + #define TX_PWR_CFG_9_STBC7_CH1 FIELD32(0x000000f0) + #define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00) ++/* bits for new 2T devices */ ++#define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff) + + /* + * TX_TXBF_CFG: +@@ -2175,6 +2319,12 @@ struct mac_iveiv_entry { + #define RFCSR3_BIT5 FIELD8(0x20) + + /* ++ * RFCSR 4: ++ * VCOCAL_EN used by MT7620 ++ */ ++#define RFCSR4_VCOCAL_EN FIELD8(0x80) ++ ++/* + * FRCSR 5: + */ + #define RFCSR5_R1 FIELD8(0x0c) +@@ -2450,6 +2600,7 @@ enum rt2800_eeprom_word { + EEPROM_TSSI_BOUND_BG5, + EEPROM_TXPOWER_A1, + EEPROM_TXPOWER_A2, ++ EEPROM_TXPOWER_INIT, + EEPROM_TSSI_BOUND_A1, + EEPROM_TSSI_BOUND_A2, + EEPROM_TSSI_BOUND_A3, --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -60,6 +60,9 @@ @@ -174,7 +367,8 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> - } + WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®); + } -+ + +- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); + *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA_MT7620); + break; + @@ -184,8 +378,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - -- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); ++ + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + + WAIT_FOR_RFCSR(rt2x00dev, ®); @@ -207,7 +400,15 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { -@@ -526,6 +592,16 @@ void rt2800_get_txwi_rxwi_size(struct rt +@@ -251,6 +317,7 @@ static const unsigned int rt2800_eeprom_ + [EEPROM_TSSI_BOUND_BG5] = 0x003b, + [EEPROM_TXPOWER_A1] = 0x003c, + [EEPROM_TXPOWER_A2] = 0x0053, ++ [EEPROM_TXPOWER_INIT] = 0x0068, + [EEPROM_TSSI_BOUND_A1] = 0x006a, + [EEPROM_TSSI_BOUND_A2] = 0x006b, + [EEPROM_TSSI_BOUND_A3] = 0x006c, +@@ -526,6 +593,16 @@ void rt2800_get_txwi_rxwi_size(struct rt *rxwi_size = RXWI_DESC_SIZE_5WORDS; break; @@ -224,7 +425,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> case RT5592: *txwi_size = TXWI_DESC_SIZE_5WORDS; *rxwi_size = RXWI_DESC_SIZE_6WORDS; -@@ -3258,6 +3334,296 @@ static void rt2800_config_channel_rf55xx +@@ -3258,6 +3335,258 @@ static void rt2800_config_channel_rf55xx rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F); } @@ -234,14 +435,8 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + struct channel_info *info) +{ + struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; -+ u32 mac_sys_ctrl, mac_status; -+ u16 eeprom, target_power; -+ u32 tx_pin = 0x00150F0F; + u8 txrx_agc_fc; + u8 rfcsr; -+ u32 reg; -+ u8 bbp; -+ int i; + + /* Frequeny plan setting */ + /* Rdiv setting (stored in rf->rf1) @@ -363,78 +558,98 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + rfcsr &= (~0x4); + rt2800_rfcsr_write(rt2x00dev, 28, rfcsr); + -+ /*if (bScan == FALSE)*/ -+ if (conf_is_ht40(conf)) { -+ txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40, ++ if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) { ++ if (conf_is_ht40(conf)) { ++ txrx_agc_fc = rt2x00_get_field8( ++ drv_data->calibration_bw40, + RFCSR24_TX_AGC_FC); -+ } else { -+ txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw20, ++ } else { ++ txrx_agc_fc = rt2x00_get_field8( ++ drv_data->calibration_bw20, + RFCSR24_TX_AGC_FC); ++ } ++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 7, 6, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 7, 7, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr); ++ ++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 7, 58, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr); ++ rt2800_rfcsr_read_bank(rt2x00dev, 7, 59, &rfcsr); ++ rfcsr &= (~0x3F); ++ rfcsr |= txrx_agc_fc; ++ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr); + } -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 6, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 7, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr); -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 58, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 59, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= txrx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr); -+ -+ rt2800_register_read(rt2x00dev, TX_ALG_CFG_0, ®); -+ reg = reg & (~0x3F3F); -+ reg |= info->default_power1; -+ reg |= (info->default_power2 << 8); -+ reg |= (0x2F << 16); -+ reg |= (0x2F << 24); ++} ++ ++static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_channel *chan, ++ int power_level) { ++ u16 eeprom, target_power, max_power; ++ u32 mac_sys_ctrl, mac_status; ++ u32 reg; ++ u8 bbp; ++ int i; ++ ++ /* hardware unit is 0.5dBm, limited to 23.5dBm */ ++ power_level *= 2; ++ if (power_level > 0x2f) ++ power_level = 0x2f; ++ ++ max_power = chan->max_power * 2; ++ if (max_power > 0x2f) ++ max_power = 0x2f; ++ ++ rt2800_register_read(rt2x00dev, TX_ALC_CFG_0, ®); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, power_level); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, power_level); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_0, max_power); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_1, max_power); + + rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_INTERNAL_TX_ALC)) { -+ /* init base power by e2p target power */ -+ rt2800_eeprom_read(rt2x00dev, 0xD0, &target_power); -+ target_power &= 0x3F; -+ reg = reg & (~0x3F3F); -+ reg |= target_power; -+ reg |= (target_power << 8); ++ /* init base power by eeprom target power */ ++ rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_INIT, ++ &target_power); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, target_power); ++ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, target_power); + } -+ rt2800_register_write(rt2x00dev, TX_ALG_CFG_0, reg); ++ rt2800_register_write(rt2x00dev, TX_ALC_CFG_0, reg); + -+ rt2800_register_read(rt2x00dev, TX_ALG_CFG_1, ®); -+ reg = reg & (~0x3F); -+ rt2800_register_write(rt2x00dev, TX_ALG_CFG_1, reg); ++ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®); ++ rt2x00_set_field32(®, TX_ALC_CFG_1_TX_TEMP_COMP, 0); ++ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); + -+ /*if (bScan == FALSE)*/ + /* Save MAC SYS CTRL registers */ + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &mac_sys_ctrl); + /* Disable Tx/Rx */ + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + /* Check MAC Tx/Rx idle */ + for (i = 0; i < 10000; i++) { -+ rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, &mac_status); ++ rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, ++ &mac_status); + if (mac_status & 0x3) + usleep_range(50, 200); + else @@ -444,7 +659,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + if (i == 10000) + rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n"); + -+ if (rf->channel > 10) { ++ if (chan->center_freq > 2457) { + rt2800_bbp_read(rt2x00dev, 30, &bbp); + bbp = 0x40; + rt2800_bbp_write(rt2x00dev, 30, bbp); @@ -463,65 +678,13 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + else + rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); + } -+ + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl); -+ -+ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); -+ rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); -+ -+ /* vcocal_en (initiate VCO calibration (reset after completion)) */ -+ rt2800_rfcsr_read(rt2x00dev, 4, &rfcsr); -+ rfcsr = ((rfcsr & ~0x80) | 0x80); -+ rt2800_rfcsr_write(rt2x00dev, 4, rfcsr); -+ usleep_range(2000, 3000); -+ -+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); -+ -+ if (rt2x00dev->default_ant.tx_chain_num == 1) { -+ rt2800_bbp_write(rt2x00dev, 91, 0x07); -+ rt2800_bbp_write(rt2x00dev, 95, 0x1A); -+ rt2800_bbp_write(rt2x00dev, 195, 128); -+ rt2800_bbp_write(rt2x00dev, 196, 0xA0); -+ rt2800_bbp_write(rt2x00dev, 195, 170); -+ rt2800_bbp_write(rt2x00dev, 196, 0x12); -+ rt2800_bbp_write(rt2x00dev, 195, 171); -+ rt2800_bbp_write(rt2x00dev, 196, 0x10); -+ } else { -+ rt2800_bbp_write(rt2x00dev, 91, 0x06); -+ rt2800_bbp_write(rt2x00dev, 95, 0x9A); -+ rt2800_bbp_write(rt2x00dev, 195, 128); -+ rt2800_bbp_write(rt2x00dev, 196, 0xE0); -+ rt2800_bbp_write(rt2x00dev, 195, 170); -+ rt2800_bbp_write(rt2x00dev, 196, 0x30); -+ rt2800_bbp_write(rt2x00dev, 195, 171); -+ rt2800_bbp_write(rt2x00dev, 196, 0x30); -+ } -+ -+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { -+ rt2800_bbp_write(rt2x00dev, 75, 0x60); -+ rt2800_bbp_write(rt2x00dev, 76, 0x44); -+ rt2800_bbp_write(rt2x00dev, 79, 0x1C); -+ rt2800_bbp_write(rt2x00dev, 80, 0x0C); -+ rt2800_bbp_write(rt2x00dev, 82, 0xB6); -+ -+ if (!conf_is_ht40(conf)) { -+ rt2800_bbp_write(rt2x00dev, 195, 141); -+ rt2800_bbp_write(rt2x00dev, 196, 0x1A); -+ } -+ } -+ -+ /* On 11A, We should delay and wait RF/BBP to be stable -+ * and the appropriate time should be 1000 micro seconds -+ * 2005/06/05 - On 11G, we also need this delay time. -+ * Otherwise it's difficult to pass the WHQL. -+ */ -+ usleep_range(1000, 1500); +} + static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) -@@ -3414,7 +3780,7 @@ static void rt2800_config_channel(struct +@@ -3414,7 +3743,7 @@ static void rt2800_config_channel(struct struct channel_info *info) { u32 reg; @@ -530,7 +693,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> u8 bbp, rfcsr; info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel, -@@ -3468,6 +3834,9 @@ static void rt2800_config_channel(struct +@@ -3468,6 +3797,9 @@ static void rt2800_config_channel(struct case RF5592: rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info); break; @@ -540,7 +703,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> default: rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); } -@@ -3574,7 +3943,7 @@ static void rt2800_config_channel(struct +@@ -3574,7 +3906,7 @@ static void rt2800_config_channel(struct else if (rt2x00_rt(rt2x00dev, RT3593) || rt2x00_rt(rt2x00dev, RT3883)) rt2800_bbp_write(rt2x00dev, 82, 0x82); @@ -549,7 +712,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> rt2800_bbp_write(rt2x00dev, 82, 0xf2); if (rt2x00_rt(rt2x00dev, RT3593) || -@@ -3596,7 +3965,7 @@ static void rt2800_config_channel(struct +@@ -3596,7 +3928,7 @@ static void rt2800_config_channel(struct if (rt2x00_rt(rt2x00dev, RT3572)) rt2800_rfcsr_write(rt2x00dev, 8, 0); @@ -558,7 +721,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> switch (rt2x00dev->default_ant.tx_chain_num) { case 3: -@@ -3645,6 +4014,7 @@ static void rt2800_config_channel(struct +@@ -3645,6 +3977,7 @@ static void rt2800_config_channel(struct rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); @@ -566,7 +729,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); -@@ -3720,7 +4090,8 @@ static void rt2800_config_channel(struct +@@ -3720,7 +4053,8 @@ static void rt2800_config_channel(struct usleep_range(1000, 1500); } @@ -576,23 +739,222 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> rt2800_bbp_write(rt2x00dev, 195, 141); rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a); -@@ -4662,6 +5033,15 @@ void rt2800_vco_calibration(struct rt2x0 +@@ -4410,6 +4744,128 @@ static void rt2800_config_txpower_rt3593 + (unsigned long) regs[i]); + } + ++static void rt2800_config_txpower_mt7620(struct rt2x00_dev *rt2x00dev, ++ struct ieee80211_channel *chan, ++ int power_level) ++{ ++ u32 reg, pwreg; ++ u16 eeprom; ++ u32 data, gdata; ++ u8 t, i; ++ enum nl80211_band band = chan->band; ++ int delta; ++ ++ /* Warn user if bw_comp is set in EEPROM */ ++ delta = rt2800_get_txpower_bw_comp(rt2x00dev, band); ++ ++ if (delta) ++ rt2x00_warn(rt2x00dev, "ignoring EEPROM HT40 power delta: %d\n", ++ delta); ++ ++ /* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT40, limit ++ * value to 0x3f and replace 0x20 by 0x21 as this is what the vendor ++ * driver does as well, though it looks kinda wrong. ++ * Maybe some misunderstanding of what a signed 8-bit value is? Maybe ++ * the hardware has a problem handling 0x20, and as the code initially ++ * used a fixed offset between HT20 and HT40 rates they had to work- ++ * around that issue and most likely just forgot about it later on. ++ * Maybe we should use rt2800_get_txpower_bw_comp() here as well, ++ * however, the corresponding EEPROM value is not respected by the ++ * vendor driver, so maybe this is rather being taken care of the ++ * TXALC and the driver doesn't need to handle it...? ++ * Though this is all very awkward, just do as they did, as that's what ++ * board vendors expected when they populated the EEPROM... ++ */ ++ for (i = 0; i < 5; i++) { ++ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, ++ i * 2, &eeprom); ++ ++ data = eeprom; ++ ++ t = eeprom & 0x3f; ++ if (t == 32) ++ t++; ++ ++ gdata = t; ++ ++ t = (eeprom & 0x3f00) >> 8; ++ if (t == 32) ++ t++; ++ ++ gdata |= (t << 8); ++ ++ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, ++ (i * 2) + 1, &eeprom); ++ ++ t = eeprom & 0x3f; ++ if (t == 32) ++ t++; ++ ++ gdata |= (t << 16); ++ ++ t = (eeprom & 0x3f00) >> 8; ++ if (t == 32) ++ t++; ++ ++ gdata |= (t << 24); ++ data |= (eeprom << 16); ++ ++ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) { ++ /* HT20 */ ++ if (data != 0xffffffff) ++ rt2800_register_write(rt2x00dev, ++ TX_PWR_CFG_0 + (i * 4), ++ data); ++ } else { ++ /* HT40 */ ++ if (gdata != 0xffffffff) ++ rt2800_register_write(rt2x00dev, ++ TX_PWR_CFG_0 + (i * 4), ++ gdata); ++ } ++ } ++ ++ /* Aparently Ralink ran out of space in the BYRATE calibration section ++ * of the EERPOM which is copied to the corresponding TX_PWR_CFG_x ++ * registers. As recent 2T chips use 8-bit instead of 4-bit values for ++ * power-offsets more space would be needed. Ralink decided to rather ++ * keep the EEPROM layout untouched and rather have some shared values ++ * covering multiple bitrates. ++ * Populate the registers not covered by the EEPROM in the same way the ++ * vendor driver does. ++ */ ++ ++ /* For OFDM 54MBS use value from OFDM 48MBS */ ++ pwreg = 0; ++ rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); ++ t = rt2x00_get_field32(reg, TX_PWR_CFG_1B_48MBS); ++ rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_54MBS, t); ++ ++ /* For MCS 7 use value from MCS 6 */ ++ rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); ++ t = rt2x00_get_field32(reg, TX_PWR_CFG_2B_MCS6_MCS7); ++ rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_MCS7, t); ++ rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, pwreg); ++ ++ /* For MCS 15 use value from MCS 14 */ ++ pwreg = 0; ++ rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); ++ t = rt2x00_get_field32(reg, TX_PWR_CFG_3B_MCS14); ++ rt2x00_set_field32(&pwreg, TX_PWR_CFG_8B_MCS15, t); ++ rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, pwreg); ++ ++ /* For STBC MCS 7 use value from STBC MCS 6 */ ++ pwreg = 0; ++ rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); ++ t = rt2x00_get_field32(reg, TX_PWR_CFG_4B_STBC_MCS6); ++ rt2x00_set_field32(&pwreg, TX_PWR_CFG_9B_STBC_MCS7, t); ++ rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, pwreg); ++ ++ rt2800_config_alc(rt2x00dev, chan, power_level); ++ ++ /* TODO: temperature compensation code! */ ++} ++ + /* + * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and + * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values, +@@ -4607,6 +5063,8 @@ static void rt2800_config_txpower(struct + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) + rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level); ++ else if (rt2x00_rf(rt2x00dev, RF7620)) ++ rt2800_config_txpower_mt7620(rt2x00dev, chan, power_level); + else + rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level); + } +@@ -4622,6 +5080,7 @@ void rt2800_vco_calibration(struct rt2x0 + { + u32 tx_pin; + u8 rfcsr; ++ unsigned long min_sleep = 0; + + /* + * A voltage-controlled oscillator(VCO) is an electronic oscillator +@@ -4661,6 +5120,15 @@ void rt2800_vco_calibration(struct rt2x0 + rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); - break; ++ min_sleep = 1000; ++ break; + case RF7620: ++ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); ++ rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); + rt2800_rfcsr_read(rt2x00dev, 4, &rfcsr); -+ /* vcocal_en (initiate VCO calibration (reset after completion)) -+ * It should be at the end of RF configuration. -+ */ -+ rfcsr = ((rfcsr & ~0x80) | 0x80); ++ rt2x00_set_field8(&rfcsr, RFCSR4_VCOCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 4, rfcsr); -+ usleep_range(2000, 3000); -+ break; ++ min_sleep = 2000; + break; default: WARN_ONCE(1, "Not supported RF chipet %x for VCO recalibration", - rt2x00dev->chip.rf); -@@ -5037,6 +5417,24 @@ static int rt2800_init_registers(struct +@@ -4668,7 +5136,8 @@ void rt2800_vco_calibration(struct rt2x0 + return; + } + +- usleep_range(1000, 1500); ++ if (min_sleep > 0) ++ usleep_range(min_sleep, min_sleep * 2); + + rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin); + if (rt2x00dev->rf_channel <= 14) { +@@ -4700,6 +5169,42 @@ void rt2800_vco_calibration(struct rt2x0 + } + rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + ++ if (rt2x00_rf(rt2x00dev, RF7620)) { ++ if (rt2x00dev->default_ant.tx_chain_num == 1) { ++ rt2800_bbp_write(rt2x00dev, 91, 0x07); ++ rt2800_bbp_write(rt2x00dev, 95, 0x1A); ++ rt2800_bbp_write(rt2x00dev, 195, 128); ++ rt2800_bbp_write(rt2x00dev, 196, 0xA0); ++ rt2800_bbp_write(rt2x00dev, 195, 170); ++ rt2800_bbp_write(rt2x00dev, 196, 0x12); ++ rt2800_bbp_write(rt2x00dev, 195, 171); ++ rt2800_bbp_write(rt2x00dev, 196, 0x10); ++ } else { ++ rt2800_bbp_write(rt2x00dev, 91, 0x06); ++ rt2800_bbp_write(rt2x00dev, 95, 0x9A); ++ rt2800_bbp_write(rt2x00dev, 195, 128); ++ rt2800_bbp_write(rt2x00dev, 196, 0xE0); ++ rt2800_bbp_write(rt2x00dev, 195, 170); ++ rt2800_bbp_write(rt2x00dev, 196, 0x30); ++ rt2800_bbp_write(rt2x00dev, 195, 171); ++ rt2800_bbp_write(rt2x00dev, 196, 0x30); ++ } ++ ++ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { ++ rt2800_bbp_write(rt2x00dev, 75, 0x60); ++ rt2800_bbp_write(rt2x00dev, 76, 0x44); ++ rt2800_bbp_write(rt2x00dev, 79, 0x1C); ++ rt2800_bbp_write(rt2x00dev, 80, 0x0C); ++ rt2800_bbp_write(rt2x00dev, 82, 0xB6); ++ } ++ ++ /* On 11A, We should delay and wait RF/BBP to be stable ++ * and the appropriate time should be 1000 micro seconds ++ * 2005/06/05 - On 11G, we also need this delay time. ++ * Otherwise it's difficult to pass the WHQL. ++ */ ++ usleep_range(1000, 1500); ++ } + } + EXPORT_SYMBOL_GPL(rt2800_vco_calibration); + +@@ -5037,6 +5542,24 @@ static int rt2800_init_registers(struct rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000); rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21); rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40); @@ -611,13 +973,13 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + 0x3630363A); + rt2800_register_write(rt2x00dev, TX1_RF_GAIN_CORRECT, + 0x3630363A); -+ rt2800_register_read(rt2x00dev, TX_ALG_CFG_1, ®); -+ reg = reg & (~0x80000000); -+ rt2800_register_write(rt2x00dev, TX_ALG_CFG_1, reg); ++ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®); ++ rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0); ++ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); } else if (rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); -@@ -6075,6 +6473,225 @@ static void rt2800_init_bbp_5592(struct +@@ -6075,6 +6598,224 @@ static void rt2800_init_bbp_5592(struct rt2800_bbp_write(rt2x00dev, 103, 0xc0); } @@ -646,7 +1008,6 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + rt2800_bbp_write(rt2x00dev, 105, bbp); + + /* Avoid data loss and CRC errors */ -+ /* MAC interface control (MAC_IF_80M, 1: 80 MHz) */ + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + /* Fix I/Q swap issue */ @@ -732,7 +1093,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + + /* BBP for G band GLRT function (BBP_128 ~ BBP_221) */ + rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00); -+ rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14); /* ? see above */ ++ rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14); + rt2800_bbp_glrt_write(rt2x00dev, 2, 0x20); + rt2800_bbp_glrt_write(rt2x00dev, 3, 0x0A); + rt2800_bbp_glrt_write(rt2x00dev, 10, 0x16); @@ -843,7 +1204,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) { unsigned int i; -@@ -6117,7 +6734,10 @@ static void rt2800_init_bbp(struct rt2x0 +@@ -6117,7 +6858,10 @@ static void rt2800_init_bbp(struct rt2x0 return; case RT5390: case RT5392: @@ -855,29 +1216,26 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> break; case RT5592: rt2800_init_bbp_5592(rt2x00dev); -@@ -7331,6 +7951,277 @@ static void rt2800_init_rfcsr_5592(struc +@@ -7331,6 +8075,269 @@ static void rt2800_init_rfcsr_5592(struc rt2800_led_open_drain_enable(rt2x00dev); } +static void rt2800_init_rfcsr_7620(struct rt2x00_dev *rt2x00dev) +{ -+ u8 rfvalue; -+ u16 freq; -+ + /* Initialize RF central register to default value */ + rt2800_rfcsr_write(rt2x00dev, 0, 0x02); + rt2800_rfcsr_write(rt2x00dev, 1, 0x03); + rt2800_rfcsr_write(rt2x00dev, 2, 0x33); + rt2800_rfcsr_write(rt2x00dev, 3, 0xFF); + rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); -+ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); /* Read only */ ++ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); + rt2800_rfcsr_write(rt2x00dev, 6, 0x00); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 8, 0x00); + rt2800_rfcsr_write(rt2x00dev, 9, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x00); + rt2800_rfcsr_write(rt2x00dev, 11, 0x00); -+ /* rt2800_rfcsr_write(rt2x00dev, 12, 0x43); *//* EEPROM */ ++ rt2800_rfcsr_write(rt2x00dev, 12, rt2x00dev->freq_offset); + rt2800_rfcsr_write(rt2x00dev, 13, 0x00); + rt2800_rfcsr_write(rt2x00dev, 14, 0x40); + rt2800_rfcsr_write(rt2x00dev, 15, 0x22); @@ -936,11 +1294,6 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + rt2800_rfcsr_write(rt2x00dev, 29, 0xAD); + rt2800_rfcsr_write(rt2x00dev, 39, 0x80); + -+ /* use rt2800_adjust_freq_offset ? */ -+ rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ, &freq); -+ rfvalue = freq & 0xff; -+ rt2800_rfcsr_write(rt2x00dev, 12, rfvalue); -+ + /* Initialize RF channel register to default value */ + rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03); + rt2800_rfcsr_write_chanreg(rt2x00dev, 1, 0x00); @@ -955,7 +1308,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> + rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x61); + rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53); + rt2800_rfcsr_write_chanreg(rt2x00dev, 12, 0x22); -+ /* rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D); */ /* fails */ ++ rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D); + rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06); + rt2800_rfcsr_write_chanreg(rt2x00dev, 15, 0x13); + rt2800_rfcsr_write_chanreg(rt2x00dev, 16, 0x22); @@ -1133,7 +1486,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) { if (rt2800_is_305x_soc(rt2x00dev)) { -@@ -7366,7 +8257,10 @@ static void rt2800_init_rfcsr(struct rt2 +@@ -7366,7 +8373,10 @@ static void rt2800_init_rfcsr(struct rt2 rt2800_init_rfcsr_5350(rt2x00dev); break; case RT5390: @@ -1145,7 +1498,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> break; case RT5392: rt2800_init_rfcsr_5392(rt2x00dev); -@@ -7780,6 +8674,7 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7780,6 +8790,7 @@ static int rt2800_init_eeprom(struct rt2 case RF5390: case RF5392: case RF5592: @@ -1153,7 +1506,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> break; default: rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n", -@@ -8258,6 +9153,24 @@ static const struct rf_channel rf_vals_5 +@@ -8258,6 +9269,24 @@ static const struct rf_channel rf_vals_5 {196, 83, 0, 12, 1}, }; @@ -1178,7 +1531,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; -@@ -8361,6 +9274,11 @@ static int rt2800_probe_hw_mode(struct r +@@ -8361,6 +9390,11 @@ static int rt2800_probe_hw_mode(struct r spec->channels = rf_vals_3x; break; @@ -1190,7 +1543,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> case RF3052: case RF3053: spec->num_channels = ARRAY_SIZE(rf_vals_3x); -@@ -8498,6 +9416,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8498,6 +9532,7 @@ static int rt2800_probe_hw_mode(struct r case RF5390: case RF5392: case RF5592: |