diff options
62 files changed, 1920 insertions, 738 deletions
diff --git a/target/linux/ar71xx/patches-3.3/000-USB-OHCI-Add-a-generic-platform-device-driver.patch b/target/linux/ar71xx/patches-3.3/000-USB-OHCI-Add-a-generic-platform-device-driver.patch new file mode 100644 index 0000000000..240cca03b2 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/000-USB-OHCI-Add-a-generic-platform-device-driver.patch @@ -0,0 +1,293 @@ +From be77ba57151bd35ce63ccf52d74b6c626fa73817 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Tue, 13 Mar 2012 01:04:47 +0100 +Subject: [PATCH 01/47] USB: OHCI: Add a generic platform device driver + +This adds a generic driver for platform devices. It works like the PCI +driver and is based on it. This is for devices which do not have an own +bus but their OHCI controller works like a PCI controller. It will be +used for the Broadcom bcma and ssb USB OHCI controller. + +Acked-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/host/Kconfig | 10 ++ + drivers/usb/host/ohci-hcd.c | 5 + + drivers/usb/host/ohci-platform.c | 194 ++++++++++++++++++++++++++++++++++++++ + include/linux/usb/ohci_pdriver.h | 38 ++++++++ + 4 files changed, 247 insertions(+), 0 deletions(-) + create mode 100644 drivers/usb/host/ohci-platform.c + create mode 100644 include/linux/usb/ohci_pdriver.h + +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -393,6 +393,16 @@ config USB_CNS3XXX_OHCI + Enable support for the CNS3XXX SOC's on-chip OHCI controller. + It is needed for low-speed USB 1.0 device support. + ++config USB_OHCI_HCD_PLATFORM ++ bool "Generic OHCI driver for a platform device" ++ depends on USB_OHCI_HCD && EXPERIMENTAL ++ default n ++ ---help--- ++ Adds an OHCI host driver for a generic platform device, which ++ provieds a memory space and an irq. ++ ++ If unsure, say N. ++ + config USB_OHCI_BIG_ENDIAN_DESC + bool + depends on USB_OHCI_HCD +--- a/drivers/usb/host/ohci-hcd.c ++++ b/drivers/usb/host/ohci-hcd.c +@@ -1121,6 +1121,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ohci_xls_driver + #endif + ++#ifdef CONFIG_USB_OHCI_HCD_PLATFORM ++#include "ohci-platform.c" ++#define PLATFORM_DRIVER ohci_platform_driver ++#endif ++ + #if !defined(PCI_DRIVER) && \ + !defined(PLATFORM_DRIVER) && \ + !defined(OMAP1_PLATFORM_DRIVER) && \ +--- /dev/null ++++ b/drivers/usb/host/ohci-platform.c +@@ -0,0 +1,194 @@ ++/* ++ * Generic platform ohci driver ++ * ++ * Copyright 2007 Michael Buesch <m@bues.ch> ++ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Derived from the OCHI-SSB driver ++ * Derived from the OHCI-PCI driver ++ * Copyright 1999 Roman Weissgaerber ++ * Copyright 2000-2002 David Brownell ++ * Copyright 1999 Linus Torvalds ++ * Copyright 1999 Gregory P. Smith ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++#include <linux/platform_device.h> ++#include <linux/usb/ohci_pdriver.h> ++ ++static int ohci_platform_reset(struct usb_hcd *hcd) ++{ ++ struct platform_device *pdev = to_platform_device(hcd->self.controller); ++ struct usb_ohci_pdata *pdata = pdev->dev.platform_data; ++ struct ohci_hcd *ohci = hcd_to_ohci(hcd); ++ int err; ++ ++ if (pdata->big_endian_desc) ++ ohci->flags |= OHCI_QUIRK_BE_DESC; ++ if (pdata->big_endian_mmio) ++ ohci->flags |= OHCI_QUIRK_BE_MMIO; ++ if (pdata->no_big_frame_no) ++ ohci->flags |= OHCI_QUIRK_FRAME_NO; ++ ++ ohci_hcd_init(ohci); ++ err = ohci_init(ohci); ++ ++ return err; ++} ++ ++static int ohci_platform_start(struct usb_hcd *hcd) ++{ ++ struct ohci_hcd *ohci = hcd_to_ohci(hcd); ++ int err; ++ ++ err = ohci_run(ohci); ++ if (err < 0) { ++ ohci_err(ohci, "can't start\n"); ++ ohci_stop(hcd); ++ } ++ ++ return err; ++} ++ ++static const struct hc_driver ohci_platform_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "Generic Platform OHCI Controller", ++ .hcd_priv_size = sizeof(struct ohci_hcd), ++ ++ .irq = ohci_irq, ++ .flags = HCD_MEMORY | HCD_USB11, ++ ++ .reset = ohci_platform_reset, ++ .start = ohci_platform_start, ++ .stop = ohci_stop, ++ .shutdown = ohci_shutdown, ++ ++ .urb_enqueue = ohci_urb_enqueue, ++ .urb_dequeue = ohci_urb_dequeue, ++ .endpoint_disable = ohci_endpoint_disable, ++ ++ .get_frame_number = ohci_get_frame, ++ ++ .hub_status_data = ohci_hub_status_data, ++ .hub_control = ohci_hub_control, ++#ifdef CONFIG_PM ++ .bus_suspend = ohci_bus_suspend, ++ .bus_resume = ohci_bus_resume, ++#endif ++ ++ .start_port_reset = ohci_start_port_reset, ++}; ++ ++static int __devinit ohci_platform_probe(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd; ++ struct resource *res_mem; ++ int irq; ++ int err = -ENOMEM; ++ ++ BUG_ON(!dev->dev.platform_data); ++ ++ if (usb_disabled()) ++ return -ENODEV; ++ ++ irq = platform_get_irq(dev, 0); ++ if (irq < 0) { ++ pr_err("no irq provieded"); ++ return irq; ++ } ++ ++ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); ++ if (!res_mem) { ++ pr_err("no memory recourse provieded"); ++ return -ENXIO; ++ } ++ ++ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, ++ dev_name(&dev->dev)); ++ if (!hcd) ++ return -ENOMEM; ++ ++ hcd->rsrc_start = res_mem->start; ++ hcd->rsrc_len = resource_size(res_mem); ++ ++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { ++ pr_err("controller already in use"); ++ err = -EBUSY; ++ goto err_put_hcd; ++ } ++ ++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); ++ if (!hcd->regs) ++ goto err_release_region; ++ err = usb_add_hcd(hcd, irq, IRQF_SHARED); ++ if (err) ++ goto err_iounmap; ++ ++ platform_set_drvdata(dev, hcd); ++ ++ return err; ++ ++err_iounmap: ++ iounmap(hcd->regs); ++err_release_region: ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++err_put_hcd: ++ usb_put_hcd(hcd); ++ return err; ++} ++ ++static int __devexit ohci_platform_remove(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ ++ usb_remove_hcd(hcd); ++ iounmap(hcd->regs); ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++ usb_put_hcd(hcd); ++ platform_set_drvdata(dev, NULL); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++ ++static int ohci_platform_suspend(struct device *dev) ++{ ++ return 0; ++} ++ ++static int ohci_platform_resume(struct device *dev) ++{ ++ struct usb_hcd *hcd = dev_get_drvdata(dev); ++ ++ ohci_finish_controller_resume(hcd); ++ return 0; ++} ++ ++#else /* !CONFIG_PM */ ++#define ohci_platform_suspend NULL ++#define ohci_platform_resume NULL ++#endif /* CONFIG_PM */ ++ ++static const struct platform_device_id ohci_platform_table[] = { ++ { "ohci-platform", 0 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(platform, ohci_platform_table); ++ ++static const struct dev_pm_ops ohci_platform_pm_ops = { ++ .suspend = ohci_platform_suspend, ++ .resume = ohci_platform_resume, ++}; ++ ++static struct platform_driver ohci_platform_driver = { ++ .id_table = ohci_platform_table, ++ .probe = ohci_platform_probe, ++ .remove = __devexit_p(ohci_platform_remove), ++ .shutdown = usb_hcd_platform_shutdown, ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "ohci-platform", ++ .pm = &ohci_platform_pm_ops, ++ } ++}; +--- /dev/null ++++ b/include/linux/usb/ohci_pdriver.h +@@ -0,0 +1,38 @@ ++/* ++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#ifndef __USB_CORE_OHCI_PDRIVER_H ++#define __USB_CORE_OHCI_PDRIVER_H ++ ++/** ++ * struct usb_ohci_pdata - platform_data for generic ohci driver ++ * ++ * @big_endian_desc: BE descriptors ++ * @big_endian_mmio: BE registers ++ * @no_big_frame_no: no big endian frame_no shift ++ * ++ * These are general configuration options for the OHCI controller. All of ++ * these options are activating more or less workarounds for some hardware. ++ */ ++struct usb_ohci_pdata { ++ unsigned big_endian_desc:1; ++ unsigned big_endian_mmio:1; ++ unsigned no_big_frame_no:1; ++}; ++ ++#endif /* __USB_CORE_OHCI_PDRIVER_H */ diff --git a/target/linux/ar71xx/patches-3.3/001-USB-EHCI-Add-a-generic-platform-device-driver.patch b/target/linux/ar71xx/patches-3.3/001-USB-EHCI-Add-a-generic-platform-device-driver.patch new file mode 100644 index 0000000000..f94f39c2e8 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/001-USB-EHCI-Add-a-generic-platform-device-driver.patch @@ -0,0 +1,305 @@ +From 4fa3face95f1ca2e396dd59324a6c6ef01df24cc Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Tue, 13 Mar 2012 01:04:48 +0100 +Subject: [PATCH 02/47] USB: EHCI: Add a generic platform device driver + +This adds a generic driver for platform devices. It works like the PCI +driver and is based on it. This is for devices which do not have an own +bus but their EHCI controller works like a PCI controller. It will be +used for the Broadcom bcma and ssb USB EHCI controller. + +Acked-by: Alan Stern <stern@rowland.harvard.edu> +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/host/Kconfig | 10 ++ + drivers/usb/host/ehci-hcd.c | 5 + + drivers/usb/host/ehci-platform.c | 198 ++++++++++++++++++++++++++++++++++++++ + include/linux/usb/ehci_pdriver.h | 46 +++++++++ + 4 files changed, 259 insertions(+), 0 deletions(-) + create mode 100644 drivers/usb/host/ehci-platform.c + create mode 100644 include/linux/usb/ehci_pdriver.h + +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -403,6 +403,16 @@ config USB_OHCI_HCD_PLATFORM + + If unsure, say N. + ++config USB_EHCI_HCD_PLATFORM ++ bool "Generic EHCI driver for a platform device" ++ depends on USB_EHCI_HCD && EXPERIMENTAL ++ default n ++ ---help--- ++ Adds an EHCI host driver for a generic platform device, which ++ provieds a memory space and an irq. ++ ++ If unsure, say N. ++ + config USB_OHCI_BIG_ENDIAN_DESC + bool + depends on USB_OHCI_HCD +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1381,6 +1381,11 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ehci_mv_driver + #endif + ++#ifdef CONFIG_USB_EHCI_HCD_PLATFORM ++#include "ehci-platform.c" ++#define PLATFORM_DRIVER ehci_platform_driver ++#endif ++ + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ + !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ + !defined(XILINX_OF_PLATFORM_DRIVER) +--- /dev/null ++++ b/drivers/usb/host/ehci-platform.c +@@ -0,0 +1,198 @@ ++/* ++ * Generic platform ehci driver ++ * ++ * Copyright 2007 Steven Brown <sbrown@cortland.com> ++ * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Derived from the ohci-ssb driver ++ * Copyright 2007 Michael Buesch <m@bues.ch> ++ * ++ * Derived from the EHCI-PCI driver ++ * Copyright (c) 2000-2004 by David Brownell ++ * ++ * Derived from the ohci-pci driver ++ * Copyright 1999 Roman Weissgaerber ++ * Copyright 2000-2002 David Brownell ++ * Copyright 1999 Linus Torvalds ++ * Copyright 1999 Gregory P. Smith ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++#include <linux/platform_device.h> ++#include <linux/usb/ehci_pdriver.h> ++ ++static int ehci_platform_reset(struct usb_hcd *hcd) ++{ ++ struct platform_device *pdev = to_platform_device(hcd->self.controller); ++ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ int retval; ++ ++ hcd->has_tt = pdata->has_tt; ++ ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; ++ ehci->big_endian_desc = pdata->big_endian_desc; ++ ehci->big_endian_mmio = pdata->big_endian_mmio; ++ ++ ehci->caps = hcd->regs + pdata->caps_offset; ++ retval = ehci_setup(hcd); ++ if (retval) ++ return retval; ++ ++ if (pdata->port_power_on) ++ ehci_port_power(ehci, 1); ++ if (pdata->port_power_off) ++ ehci_port_power(ehci, 0); ++ ++ return 0; ++} ++ ++static const struct hc_driver ehci_platform_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "Generic Platform EHCI Controller", ++ .hcd_priv_size = sizeof(struct ehci_hcd), ++ ++ .irq = ehci_irq, ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ .reset = ehci_platform_reset, ++ .start = ehci_run, ++ .stop = ehci_stop, ++ .shutdown = ehci_shutdown, ++ ++ .urb_enqueue = ehci_urb_enqueue, ++ .urb_dequeue = ehci_urb_dequeue, ++ .endpoint_disable = ehci_endpoint_disable, ++ .endpoint_reset = ehci_endpoint_reset, ++ ++ .get_frame_number = ehci_get_frame, ++ ++ .hub_status_data = ehci_hub_status_data, ++ .hub_control = ehci_hub_control, ++#if defined(CONFIG_PM) ++ .bus_suspend = ehci_bus_suspend, ++ .bus_resume = ehci_bus_resume, ++#endif ++ .relinquish_port = ehci_relinquish_port, ++ .port_handed_over = ehci_port_handed_over, ++ ++ .update_device = ehci_update_device, ++ ++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, ++}; ++ ++static int __devinit ehci_platform_probe(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd; ++ struct resource *res_mem; ++ int irq; ++ int err = -ENOMEM; ++ ++ BUG_ON(!dev->dev.platform_data); ++ ++ if (usb_disabled()) ++ return -ENODEV; ++ ++ irq = platform_get_irq(dev, 0); ++ if (irq < 0) { ++ pr_err("no irq provieded"); ++ return irq; ++ } ++ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); ++ if (!res_mem) { ++ pr_err("no memory recourse provieded"); ++ return -ENXIO; ++ } ++ ++ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, ++ dev_name(&dev->dev)); ++ if (!hcd) ++ return -ENOMEM; ++ ++ hcd->rsrc_start = res_mem->start; ++ hcd->rsrc_len = resource_size(res_mem); ++ ++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { ++ pr_err("controller already in use"); ++ err = -EBUSY; ++ goto err_put_hcd; ++ } ++ ++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); ++ if (!hcd->regs) ++ goto err_release_region; ++ err = usb_add_hcd(hcd, irq, IRQF_SHARED); ++ if (err) ++ goto err_iounmap; ++ ++ platform_set_drvdata(dev, hcd); ++ ++ return err; ++ ++err_iounmap: ++ iounmap(hcd->regs); ++err_release_region: ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++err_put_hcd: ++ usb_put_hcd(hcd); ++ return err; ++} ++ ++static int __devexit ehci_platform_remove(struct platform_device *dev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(dev); ++ ++ usb_remove_hcd(hcd); ++ iounmap(hcd->regs); ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++ usb_put_hcd(hcd); ++ platform_set_drvdata(dev, NULL); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++ ++static int ehci_platform_suspend(struct device *dev) ++{ ++ struct usb_hcd *hcd = dev_get_drvdata(dev); ++ bool wakeup = device_may_wakeup(dev); ++ ++ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), wakeup); ++ return 0; ++} ++ ++static int ehci_platform_resume(struct device *dev) ++{ ++ struct usb_hcd *hcd = dev_get_drvdata(dev); ++ ++ ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd)); ++ return 0; ++} ++ ++#else /* !CONFIG_PM */ ++#define ehci_platform_suspend NULL ++#define ehci_platform_resume NULL ++#endif /* CONFIG_PM */ ++ ++static const struct platform_device_id ehci_platform_table[] = { ++ { "ehci-platform", 0 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(platform, ehci_platform_table); ++ ++static const struct dev_pm_ops ehci_platform_pm_ops = { ++ .suspend = ehci_platform_suspend, ++ .resume = ehci_platform_resume, ++}; ++ ++static struct platform_driver ehci_platform_driver = { ++ .id_table = ehci_platform_table, ++ .probe = ehci_platform_probe, ++ .remove = __devexit_p(ehci_platform_remove), ++ .shutdown = usb_hcd_platform_shutdown, ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "ehci-platform", ++ .pm = &ehci_platform_pm_ops, ++ } ++}; +--- /dev/null ++++ b/include/linux/usb/ehci_pdriver.h +@@ -0,0 +1,46 @@ ++/* ++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software Foundation, ++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#ifndef __USB_CORE_EHCI_PDRIVER_H ++#define __USB_CORE_EHCI_PDRIVER_H ++ ++/** ++ * struct usb_ehci_pdata - platform_data for generic ehci driver ++ * ++ * @caps_offset: offset of the EHCI Capability Registers to the start of ++ * the io memory region provided to the driver. ++ * @has_tt: set to 1 if TT is integrated in root hub. ++ * @port_power_on: set to 1 if the controller needs a power up after ++ * initialization. ++ * @port_power_off: set to 1 if the controller needs to be powered down ++ * after initialization. ++ * ++ * These are general configuration options for the EHCI controller. All of ++ * these options are activating more or less workarounds for some hardware. ++ */ ++struct usb_ehci_pdata { ++ int caps_offset; ++ unsigned has_tt:1; ++ unsigned has_synopsys_hc_bug:1; ++ unsigned big_endian_desc:1; ++ unsigned big_endian_mmio:1; ++ unsigned port_power_on:1; ++ unsigned port_power_off:1; ++}; ++ ++#endif /* __USB_CORE_EHCI_PDRIVER_H */ diff --git a/target/linux/ar71xx/patches-3.3/002-USB-use-generic-platform-driver-on-ath79.patch b/target/linux/ar71xx/patches-3.3/002-USB-use-generic-platform-driver-on-ath79.patch new file mode 100644 index 0000000000..d3a3b7106a --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/002-USB-use-generic-platform-driver-on-ath79.patch @@ -0,0 +1,544 @@ +From dbcbcdd001c5943adbb18db3b8f0dafc405559eb Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Tue, 13 Mar 2012 01:04:53 +0100 +Subject: [PATCH 03/47] USB: use generic platform driver on ath79 + +The ath79 usb driver doesn't do anything special and is now converted +to the generic ehci and ohci driver. +This was tested on a TP-Link TL-WR1043ND (AR9132) + +Acked-by: Gabor Juhos <juhosg@openwrt.org> +CC: Imre Kaloz <kaloz@openwrt.org> +CC: linux-mips@linux-mips.org +CC: Ralf Baechle <ralf@linux-mips.org> +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + arch/mips/ath79/dev-usb.c | 31 +++++- + drivers/usb/host/Kconfig | 12 ++- + drivers/usb/host/ehci-ath79.c | 208 ----------------------------------------- + drivers/usb/host/ehci-hcd.c | 5 - + drivers/usb/host/ohci-ath79.c | 151 ----------------------------- + drivers/usb/host/ohci-hcd.c | 5 - + 6 files changed, 35 insertions(+), 377 deletions(-) + delete mode 100644 drivers/usb/host/ehci-ath79.c + delete mode 100644 drivers/usb/host/ohci-ath79.c + +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -17,6 +17,8 @@ + #include <linux/irq.h> + #include <linux/dma-mapping.h> + #include <linux/platform_device.h> ++#include <linux/usb/ehci_pdriver.h> ++#include <linux/usb/ohci_pdriver.h> + + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> +@@ -36,14 +38,19 @@ static struct resource ath79_ohci_resour + }; + + static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32); ++ ++static struct usb_ohci_pdata ath79_ohci_pdata = { ++}; ++ + static struct platform_device ath79_ohci_device = { +- .name = "ath79-ohci", ++ .name = "ohci-platform", + .id = -1, + .resource = ath79_ohci_resources, + .num_resources = ARRAY_SIZE(ath79_ohci_resources), + .dev = { + .dma_mask = &ath79_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), ++ .platform_data = &ath79_ohci_pdata, + }, + }; + +@@ -60,8 +67,20 @@ static struct resource ath79_ehci_resour + }; + + static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32); ++ ++static struct usb_ehci_pdata ath79_ehci_pdata_v1 = { ++ .has_synopsys_hc_bug = 1, ++ .port_power_off = 1, ++}; ++ ++static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { ++ .caps_offset = 0x100, ++ .has_tt = 1, ++ .port_power_off = 1, ++}; ++ + static struct platform_device ath79_ehci_device = { +- .name = "ath79-ehci", ++ .name = "ehci-platform", + .id = -1, + .resource = ath79_ehci_resources, + .num_resources = ARRAY_SIZE(ath79_ehci_resources), +@@ -101,7 +120,7 @@ static void __init ath79_usb_setup(void) + + ath79_ehci_resources[0].start = AR71XX_EHCI_BASE; + ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1; +- ath79_ehci_device.name = "ar71xx-ehci"; ++ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1; + platform_device_register(&ath79_ehci_device); + } + +@@ -142,7 +161,7 @@ static void __init ar724x_usb_setup(void + + ath79_ehci_resources[0].start = AR724X_EHCI_BASE; + ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1; +- ath79_ehci_device.name = "ar724x-ehci"; ++ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; + platform_device_register(&ath79_ehci_device); + } + +@@ -159,7 +178,7 @@ static void __init ar913x_usb_setup(void + + ath79_ehci_resources[0].start = AR913X_EHCI_BASE; + ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1; +- ath79_ehci_device.name = "ar913x-ehci"; ++ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; + platform_device_register(&ath79_ehci_device); + } + +@@ -176,7 +195,7 @@ static void __init ar933x_usb_setup(void + + ath79_ehci_resources[0].start = AR933X_EHCI_BASE; + ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1; +- ath79_ehci_device.name = "ar933x-ehci"; ++ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; + platform_device_register(&ath79_ehci_device); + } + +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -218,11 +218,15 @@ config USB_CNS3XXX_EHCI + support. + + config USB_EHCI_ATH79 +- bool "EHCI support for AR7XXX/AR9XXX SoCs" ++ bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" + depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) + select USB_EHCI_ROOT_HUB_TT ++ select USB_EHCI_HCD_PLATFORM + default y + ---help--- ++ This option is deprecated now and the driver was removed, use ++ USB_EHCI_HCD_PLATFORM instead. ++ + Enables support for the built-in EHCI controller present + on the Atheros AR7XXX/AR9XXX SoCs. + +@@ -312,10 +316,14 @@ config USB_OHCI_HCD_OMAP3 + OMAP3 and later chips. + + config USB_OHCI_ATH79 +- bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs" ++ bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" + depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X) ++ select USB_OHCI_HCD_PLATFORM + default y + help ++ This option is deprecated now and the driver was removed, use ++ USB_OHCI_HCD_PLATFORM instead. ++ + Enables support for the built-in OHCI controller present on the + Atheros AR71XX/AR7240 SoCs. + +--- a/drivers/usb/host/ehci-ath79.c ++++ /dev/null +@@ -1,208 +0,0 @@ +-/* +- * Bus Glue for Atheros AR7XXX/AR9XXX built-in EHCI controller. +- * +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * Parts of this file are based on Atheros' 2.6.15 BSP +- * Copyright (C) 2007 Atheros Communications, Inc. +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/platform_device.h> +- +-enum { +- EHCI_ATH79_IP_V1 = 0, +- EHCI_ATH79_IP_V2, +-}; +- +-static const struct platform_device_id ehci_ath79_id_table[] = { +- { +- .name = "ar71xx-ehci", +- .driver_data = EHCI_ATH79_IP_V1, +- }, +- { +- .name = "ar724x-ehci", +- .driver_data = EHCI_ATH79_IP_V2, +- }, +- { +- .name = "ar913x-ehci", +- .driver_data = EHCI_ATH79_IP_V2, +- }, +- { +- .name = "ar933x-ehci", +- .driver_data = EHCI_ATH79_IP_V2, +- }, +- { +- /* terminating entry */ +- }, +-}; +- +-MODULE_DEVICE_TABLE(platform, ehci_ath79_id_table); +- +-static int ehci_ath79_init(struct usb_hcd *hcd) +-{ +- struct ehci_hcd *ehci = hcd_to_ehci(hcd); +- struct platform_device *pdev = to_platform_device(hcd->self.controller); +- const struct platform_device_id *id; +- int ret; +- +- id = platform_get_device_id(pdev); +- if (!id) { +- dev_err(hcd->self.controller, "missing device id\n"); +- return -EINVAL; +- } +- +- switch (id->driver_data) { +- case EHCI_ATH79_IP_V1: +- ehci->has_synopsys_hc_bug = 1; +- +- ehci->caps = hcd->regs; +- ehci->regs = hcd->regs + +- HC_LENGTH(ehci, +- ehci_readl(ehci, &ehci->caps->hc_capbase)); +- break; +- +- case EHCI_ATH79_IP_V2: +- hcd->has_tt = 1; +- +- ehci->caps = hcd->regs + 0x100; +- ehci->regs = hcd->regs + 0x100 + +- HC_LENGTH(ehci, +- ehci_readl(ehci, &ehci->caps->hc_capbase)); +- break; +- +- default: +- BUG(); +- } +- +- dbg_hcs_params(ehci, "reset"); +- dbg_hcc_params(ehci, "reset"); +- ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); +- ehci->sbrn = 0x20; +- +- ehci_reset(ehci); +- +- ret = ehci_init(hcd); +- if (ret) +- return ret; +- +- ehci_port_power(ehci, 0); +- +- return 0; +-} +- +-static const struct hc_driver ehci_ath79_hc_driver = { +- .description = hcd_name, +- .product_desc = "Atheros built-in EHCI controller", +- .hcd_priv_size = sizeof(struct ehci_hcd), +- .irq = ehci_irq, +- .flags = HCD_MEMORY | HCD_USB2, +- +- .reset = ehci_ath79_init, +- .start = ehci_run, +- .stop = ehci_stop, +- .shutdown = ehci_shutdown, +- +- .urb_enqueue = ehci_urb_enqueue, +- .urb_dequeue = ehci_urb_dequeue, +- .endpoint_disable = ehci_endpoint_disable, +- .endpoint_reset = ehci_endpoint_reset, +- +- .get_frame_number = ehci_get_frame, +- +- .hub_status_data = ehci_hub_status_data, +- .hub_control = ehci_hub_control, +- +- .relinquish_port = ehci_relinquish_port, +- .port_handed_over = ehci_port_handed_over, +- +- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +-}; +- +-static int ehci_ath79_probe(struct platform_device *pdev) +-{ +- struct usb_hcd *hcd; +- struct resource *res; +- int irq; +- int ret; +- +- if (usb_disabled()) +- return -ENODEV; +- +- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); +- if (!res) { +- dev_dbg(&pdev->dev, "no IRQ specified\n"); +- return -ENODEV; +- } +- irq = res->start; +- +- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (!res) { +- dev_dbg(&pdev->dev, "no base address specified\n"); +- return -ENODEV; +- } +- +- hcd = usb_create_hcd(&ehci_ath79_hc_driver, &pdev->dev, +- dev_name(&pdev->dev)); +- if (!hcd) +- return -ENOMEM; +- +- hcd->rsrc_start = res->start; +- hcd->rsrc_len = resource_size(res); +- +- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { +- dev_dbg(&pdev->dev, "controller already in use\n"); +- ret = -EBUSY; +- goto err_put_hcd; +- } +- +- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); +- if (!hcd->regs) { +- dev_dbg(&pdev->dev, "error mapping memory\n"); +- ret = -EFAULT; +- goto err_release_region; +- } +- +- ret = usb_add_hcd(hcd, irq, IRQF_SHARED); +- if (ret) +- goto err_iounmap; +- +- return 0; +- +-err_iounmap: +- iounmap(hcd->regs); +- +-err_release_region: +- release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +-err_put_hcd: +- usb_put_hcd(hcd); +- return ret; +-} +- +-static int ehci_ath79_remove(struct platform_device *pdev) +-{ +- struct usb_hcd *hcd = platform_get_drvdata(pdev); +- +- usb_remove_hcd(hcd); +- iounmap(hcd->regs); +- release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +- usb_put_hcd(hcd); +- +- return 0; +-} +- +-static struct platform_driver ehci_ath79_driver = { +- .probe = ehci_ath79_probe, +- .remove = ehci_ath79_remove, +- .id_table = ehci_ath79_id_table, +- .driver = { +- .owner = THIS_MODULE, +- .name = "ath79-ehci", +- } +-}; +- +-MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ehci"); +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1356,11 +1356,6 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER s5p_ehci_driver + #endif + +-#ifdef CONFIG_USB_EHCI_ATH79 +-#include "ehci-ath79.c" +-#define PLATFORM_DRIVER ehci_ath79_driver +-#endif +- + #ifdef CONFIG_SPARC_LEON + #include "ehci-grlib.c" + #define PLATFORM_DRIVER ehci_grlib_driver +--- a/drivers/usb/host/ohci-ath79.c ++++ /dev/null +@@ -1,151 +0,0 @@ +-/* +- * OHCI HCD (Host Controller Driver) for USB. +- * +- * Bus Glue for Atheros AR71XX/AR724X built-in OHCI controller. +- * +- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> +- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +- * +- * Parts of this file are based on Atheros' 2.6.15 BSP +- * Copyright (C) 2007 Atheros Communications, Inc. +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License version 2 as published +- * by the Free Software Foundation. +- */ +- +-#include <linux/platform_device.h> +- +-static int __devinit ohci_ath79_start(struct usb_hcd *hcd) +-{ +- struct ohci_hcd *ohci = hcd_to_ohci(hcd); +- int ret; +- +- ret = ohci_init(ohci); +- if (ret < 0) +- return ret; +- +- ret = ohci_run(ohci); +- if (ret < 0) +- goto err; +- +- return 0; +- +-err: +- ohci_stop(hcd); +- return ret; +-} +- +-static const struct hc_driver ohci_ath79_hc_driver = { +- .description = hcd_name, +- .product_desc = "Atheros built-in OHCI controller", +- .hcd_priv_size = sizeof(struct ohci_hcd), +- +- .irq = ohci_irq, +- .flags = HCD_USB11 | HCD_MEMORY, +- +- .start = ohci_ath79_start, +- .stop = ohci_stop, +- .shutdown = ohci_shutdown, +- +- .urb_enqueue = ohci_urb_enqueue, +- .urb_dequeue = ohci_urb_dequeue, +- .endpoint_disable = ohci_endpoint_disable, +- +- /* +- * scheduling support +- */ +- .get_frame_number = ohci_get_frame, +- +- /* +- * root hub support +- */ +- .hub_status_data = ohci_hub_status_data, +- .hub_control = ohci_hub_control, +- .start_port_reset = ohci_start_port_reset, +-}; +- +-static int ohci_ath79_probe(struct platform_device *pdev) +-{ +- struct usb_hcd *hcd; +- struct resource *res; +- int irq; +- int ret; +- +- if (usb_disabled()) +- return -ENODEV; +- +- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); +- if (!res) { +- dev_dbg(&pdev->dev, "no IRQ specified\n"); +- return -ENODEV; +- } +- irq = res->start; +- +- hcd = usb_create_hcd(&ohci_ath79_hc_driver, &pdev->dev, +- dev_name(&pdev->dev)); +- if (!hcd) +- return -ENOMEM; +- +- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (!res) { +- dev_dbg(&pdev->dev, "no base address specified\n"); +- ret = -ENODEV; +- goto err_put_hcd; +- } +- hcd->rsrc_start = res->start; +- hcd->rsrc_len = resource_size(res); +- +- if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { +- dev_dbg(&pdev->dev, "controller already in use\n"); +- ret = -EBUSY; +- goto err_put_hcd; +- } +- +- hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); +- if (!hcd->regs) { +- dev_dbg(&pdev->dev, "error mapping memory\n"); +- ret = -EFAULT; +- goto err_release_region; +- } +- +- ohci_hcd_init(hcd_to_ohci(hcd)); +- +- ret = usb_add_hcd(hcd, irq, 0); +- if (ret) +- goto err_stop_hcd; +- +- return 0; +- +-err_stop_hcd: +- iounmap(hcd->regs); +-err_release_region: +- release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +-err_put_hcd: +- usb_put_hcd(hcd); +- return ret; +-} +- +-static int ohci_ath79_remove(struct platform_device *pdev) +-{ +- struct usb_hcd *hcd = platform_get_drvdata(pdev); +- +- usb_remove_hcd(hcd); +- iounmap(hcd->regs); +- release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +- usb_put_hcd(hcd); +- +- return 0; +-} +- +-static struct platform_driver ohci_hcd_ath79_driver = { +- .probe = ohci_ath79_probe, +- .remove = ohci_ath79_remove, +- .shutdown = usb_hcd_platform_shutdown, +- .driver = { +- .name = "ath79-ohci", +- .owner = THIS_MODULE, +- }, +-}; +- +-MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ohci"); +--- a/drivers/usb/host/ohci-hcd.c ++++ b/drivers/usb/host/ohci-hcd.c +@@ -1111,11 +1111,6 @@ MODULE_LICENSE ("GPL"); + #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver + #endif + +-#ifdef CONFIG_USB_OHCI_ATH79 +-#include "ohci-ath79.c" +-#define PLATFORM_DRIVER ohci_hcd_ath79_driver +-#endif +- + #ifdef CONFIG_CPU_XLR + #include "ohci-xls.c" + #define PLATFORM_DRIVER ohci_xls_driver diff --git a/target/linux/ar71xx/patches-3.3/003-MIPS-ath79-fix-AR933X-WMAC-reset-code.patch b/target/linux/ar71xx/patches-3.3/003-MIPS-ath79-fix-AR933X-WMAC-reset-code.patch new file mode 100644 index 0000000000..e5807c71f4 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/003-MIPS-ath79-fix-AR933X-WMAC-reset-code.patch @@ -0,0 +1,31 @@ +From 51233d66e030239f99755b2983753eff9b748365 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Wed, 14 Mar 2012 10:28:35 +0100 +Subject: [PATCH 04/47] MIPS: ath79: fix AR933X WMAC reset code + +The current code puts the built-in WMAC device of the +AR933X SoCs into reset instead of starting it. This +causes a hard lock on AR933X based boards when the +wireless driver tries to access the device. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: stable@vger.kernel.org +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3484/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/ath79/dev-wmac.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -58,8 +58,8 @@ static void __init ar913x_wmac_setup(voi + + static int ar933x_wmac_reset(void) + { +- ath79_device_reset_clear(AR933X_RESET_WMAC); + ath79_device_reset_set(AR933X_RESET_WMAC); ++ ath79_device_reset_clear(AR933X_RESET_WMAC); + + return 0; + } diff --git a/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch b/target/linux/ar71xx/patches-3.3/100-MIPS-ath79-separate-common-PCI-code.patch index 547f4fbd27..6062c894fb 100644 --- a/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-separate-common-PCI-code.patch +++ b/target/linux/ar71xx/patches-3.3/100-MIPS-ath79-separate-common-PCI-code.patch @@ -1,7 +1,7 @@ -From c98b48027516a2e71688a5957e4e0120f4aa8c61 Mon Sep 17 00:00:00 2001 +From 9d9c0d49315520754660c8df3f42d93ecf7dba7a Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 09:47:44 +0100 -Subject: [PATCH 02/35] MIPS: ath79: separate common PCI code +Date: Wed, 14 Mar 2012 10:29:21 +0100 +Subject: [PATCH 05/47] MIPS: ath79: separate common PCI code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit @@ -22,10 +22,9 @@ well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: René Bolldorf <xsecute@googlemail.com> - -v4: - add an Acked-by tag from René -v3: - no changes -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3485/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/Makefile | 1 + arch/mips/ath79/pci.c | 46 +++++++++++++++++++++++++++++++++++++++++++ diff --git a/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch b/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-rename-pci-ath724x.h.patch index a5c25b19ba..f28f20cb23 100644 --- a/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-rename-pci-ath724x.h.patch +++ b/target/linux/ar71xx/patches-3.3/101-MIPS-ath79-rename-pci-ath724x.h.patch @@ -1,7 +1,7 @@ -From 204fd70abd99099f6c2e2213a2baa1d51c03a039 Mon Sep 17 00:00:00 2001 +From 293dcf4142717d8059540bd69d1517c442617569 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 09:50:50 +0100 -Subject: [PATCH 03/35] MIPS: ath79: rename pci-ath724x.h +Date: Wed, 14 Mar 2012 10:29:22 +0100 +Subject: [PATCH 06/47] MIPS: ath79: rename pci-ath724x.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit @@ -12,10 +12,9 @@ directory. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: René Bolldorf <xsecute@googlemail.com> - -v4: - add an Acked-by tag from René -v3: - move include "pci.h" out of the #ifdef CONFIG_PCI section -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3486/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/mach-ubnt-xm.c | 2 +- arch/mips/ath79/pci.c | 2 +- diff --git a/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch b/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch index 42fa5c8a42..9696a75228 100644 --- a/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch +++ b/target/linux/ar71xx/patches-3.3/102-MIPS-ath79-make-ath724x_pcibios_init-visible-for-ext.patch @@ -1,17 +1,16 @@ -From 7e59b95e3424c078de0d75d699433da0dd289fc1 Mon Sep 17 00:00:00 2001 +From a9e38566ebe755219db10fa155fa8f0f4efc20d9 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 10:13:37 +0100 -Subject: [PATCH 04/35] MIPS: ath79: make ath724x_pcibios_init visible for external code +Date: Wed, 14 Mar 2012 10:29:23 +0100 +Subject: [PATCH 07/47] MIPS: ath79: make ath724x_pcibios_init visible for external code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: René Bolldorf <xsecute@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v4: - add a sob tag -v3: - no changes -v2: - fix a typo in my e-mail address +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3487/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/include/asm/mach-ath79/pci.h | 20 ++++++++++++++++++++ arch/mips/pci/pci-ath724x.c | 3 ++- @@ -37,7 +36,7 @@ v2: - fix a typo in my e-mail address +#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X) +int ath724x_pcibios_init(void); +#else -+static inline int ath724x_pcibios_init(void) { return 0 }; ++static inline int ath724x_pcibios_init(void) { return 0; } +#endif + +#endif /* __ASM_MACH_ATH79_PCI_H */ diff --git a/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch b/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-add-a-common-PCI-registration-function.patch index 1b52f25e5e..34587b63a1 100644 --- a/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-add-a-common-PCI-registration-function.patch +++ b/target/linux/ar71xx/patches-3.3/103-MIPS-ath79-add-a-common-PCI-registration-function.patch @@ -1,7 +1,7 @@ -From fbf38a9b03d0c47ed602f090ebb2d8ecc0d51d04 Mon Sep 17 00:00:00 2001 +From e3edaac2e967f07ae3b726e64e1c290233361bc7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 10:25:26 +0100 -Subject: [PATCH 05/35] MIPS: ath79: add a common PCI registration function +Date: Wed, 14 Mar 2012 10:29:24 +0100 +Subject: [PATCH 08/47] MIPS: ath79: add a common PCI registration function The current code unconditionally registers the AR724X specific PCI controller, even if the kernel is running @@ -12,11 +12,9 @@ and only register the AR724X PCI controller if the kernel is running on an AR724X SoC. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v4: - simplify ath79_register_pci function -v3: - fix compile error if CONFIG_PCI is not defined - - add __init annotation to ath79_register_pci -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3488/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/mach-ubnt-xm.c | 1 + arch/mips/ath79/pci.c | 10 ++++++++++ diff --git a/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch b/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch index 55adff0a70..e7189289cc 100644 --- a/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch +++ b/target/linux/ar71xx/patches-3.3/104-MIPS-ath79-rename-pci-ath724x.c-to-make-it-reflect-t.patch @@ -1,18 +1,16 @@ -From 9510a9988638ae2386277a832fab2df8ca37d75a Mon Sep 17 00:00:00 2001 +From 36dfdaa097ee1b12139187dc89cfa23fbb92b53b Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 11:07:26 +0100 -Subject: [PATCH 06/35] MIPS: ath79: rename pci-ath724x.c to make it reflect the real SoC name +Date: Wed, 14 Mar 2012 10:29:25 +0100 +Subject: [PATCH 09/47] MIPS: ath79: rename pci-ath724x.c to make it reflect the real SoC name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: René Bolldorf <xsecute@googlemail.com> - -v4: - add an Acked-by tag from René -v4: - no changes -v3: - no changes -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3489/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/pci/Makefile | 2 +- arch/mips/pci/pci-ar724x.c | 139 +++++++++++++++++++++++++++++++++++++++++++ diff --git a/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch b/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-replace-ath724x-to-ar724x.patch index 7e5df9f0d4..0a224ed54d 100644 --- a/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-replace-ath724x-to-ar724x.patch +++ b/target/linux/ar71xx/patches-3.3/105-MIPS-ath79-replace-ath724x-to-ar724x.patch @@ -1,7 +1,7 @@ -From 0cbee5634678ffbd10bee9e302d013392dd8289e Mon Sep 17 00:00:00 2001 +From 9f0c37b1d071355d4c027958f370823c8f891480 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 11:16:33 +0100 -Subject: [PATCH 07/35] MIPS: ath79: replace ath724x to ar724x +Date: Wed, 14 Mar 2012 10:29:26 +0100 +Subject: [PATCH 10/47] MIPS: ath79: replace ath724x to ar724x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit @@ -11,11 +11,9 @@ structure names to reflect the name of the real SoC. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: René Bolldorf <xsecute@googlemail.com> - -v4: - add an Acked-by tag from René - - refreshed due to the changes in a previous patch -v3: - no changes -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3490/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/mach-ubnt-xm.c | 4 +- arch/mips/ath79/pci.c | 6 ++-- @@ -105,8 +103,8 @@ v2: - no changes -int ath724x_pcibios_init(void); +int ar724x_pcibios_init(void); #else --static inline int ath724x_pcibios_init(void) { return 0 }; -+static inline int ar724x_pcibios_init(void) { return 0 }; +-static inline int ath724x_pcibios_init(void) { return 0; } ++static inline int ar724x_pcibios_init(void) { return 0; } #endif #endif /* __ASM_MACH_ATH79_PCI_H */ diff --git a/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch b/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch index adc7f18713..108ac10e43 100644 --- a/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch +++ b/target/linux/ar71xx/patches-3.3/106-MIPS-ath79-use-io-accessor-macros-in-pci-ar724x.c.patch @@ -1,17 +1,16 @@ -From db464f2ad82c03f847d8eabbb8251b5c567e6720 Mon Sep 17 00:00:00 2001 +From 0f5728e7e6fa7f0969ec79bd623261d3d830e5e7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 11:52:41 +0100 -Subject: [PATCH 08/35] MIPS: ath79: use io-accessor macros in pci-ar724x.c +Date: Wed, 14 Mar 2012 10:29:27 +0100 +Subject: [PATCH 11/47] MIPS: ath79: use io-accessor macros in pci-ar724x.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: René Bolldorf <xsecute@googlemail.com> - -v4: - add an Acked-by tag from René -v3: - no changes -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3491/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/pci/pci-ar724x.c | 38 ++++++++++++++++++++++++-------------- 1 files changed, 24 insertions(+), 14 deletions(-) diff --git a/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch b/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch index 1fb03c6cdf..9ce1c396e6 100644 --- a/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch +++ b/target/linux/ar71xx/patches-3.3/107-MIPS-ath79-remove-superfluous-alignment-checks-from-.patch @@ -1,14 +1,15 @@ -From 744ffdd4e90cd6671f46eadf9d7cf55b07618d73 Mon Sep 17 00:00:00 2001 +From e9889bee75d03338daf7ed422661ae28f3aa7063 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 21:37:17 +0100 -Subject: [PATCH 09/35] MIPS: ath79: remove superfluous alignment checks from pci-ar724x.c +Date: Wed, 14 Mar 2012 10:36:03 +0100 +Subject: [PATCH 12/47] MIPS: ath79: remove superfluous alignment checks from pci-ar724x.c The alignment of the 'where' parameters are checked in the core PCI code already. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3492/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/pci/pci-ar724x.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-) diff --git a/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch b/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch new file mode 100644 index 0000000000..97db6de9a8 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/108-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch @@ -0,0 +1,134 @@ +From 39f3275077a5b143616fcb3e7a6457a5c42739ee Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Wed, 14 Mar 2012 10:36:04 +0100 +Subject: [PATCH 13/47] MIPS: ath79: fix broken ar724x_pci_{read,write} functions + +The current ar724x_pci_{read,write} functions are +broken. Due to that, pci_read_config_byte returns +with bogus values, and pci_write_config_{byte,word} +unconditionally clears the accessed PCI configuration +registers instead of changing the value of them. + +The patch fixes the broken functions, thus the PCI +configuration space can be accessed correctly. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3493/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + arch/mips/pci/pci-ar724x.c | 52 ++++++++++++++++++++++---------------------- + 1 files changed, 26 insertions(+), 26 deletions(-) + +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -22,8 +22,9 @@ static void __iomem *ar724x_pci_devcfg_b + static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t *value) + { +- unsigned long flags, addr, tval, mask; ++ unsigned long flags; + void __iomem *base; ++ u32 data; + + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; +@@ -31,24 +32,22 @@ static int ar724x_pci_read(struct pci_bu + base = ar724x_pci_devcfg_base; + + spin_lock_irqsave(&ar724x_pci_lock, flags); ++ data = __raw_readl(base + (where & ~3)); + + switch (size) { + case 1: +- addr = where & ~3; +- mask = 0xff000000 >> ((where % 4) * 8); +- tval = __raw_readl(base + addr); +- tval = tval & ~mask; +- *value = (tval >> ((4 - (where % 4))*8)); ++ if (where & 1) ++ data >>= 8; ++ if (where & 2) ++ data >>= 16; ++ data &= 0xff; + break; + case 2: +- addr = where & ~3; +- mask = 0xffff0000 >> ((where % 4)*8); +- tval = __raw_readl(base + addr); +- tval = tval & ~mask; +- *value = (tval >> ((4 - (where % 4))*8)); ++ if (where & 2) ++ data >>= 16; ++ data &= 0xffff; + break; + case 4: +- *value = __raw_readl(base + where); + break; + default: + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +@@ -57,6 +56,7 @@ static int ar724x_pci_read(struct pci_bu + } + + spin_unlock_irqrestore(&ar724x_pci_lock, flags); ++ *value = data; + + return PCIBIOS_SUCCESSFUL; + } +@@ -64,8 +64,10 @@ static int ar724x_pci_read(struct pci_bu + static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t value) + { +- unsigned long flags, tval, addr, mask; ++ unsigned long flags; + void __iomem *base; ++ u32 data; ++ int s; + + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; +@@ -73,26 +75,21 @@ static int ar724x_pci_write(struct pci_b + base = ar724x_pci_devcfg_base; + + spin_lock_irqsave(&ar724x_pci_lock, flags); ++ data = __raw_readl(base + (where & ~3)); + + switch (size) { + case 1: +- addr = where & ~3; +- mask = 0xff000000 >> ((where % 4)*8); +- tval = __raw_readl(base + addr); +- tval = tval & ~mask; +- tval |= (value << ((4 - (where % 4))*8)) & mask; +- __raw_writel(tval, base + addr); ++ s = ((where & 3) * 8); ++ data &= ~(0xff << s); ++ data |= ((value & 0xff) << s); + break; + case 2: +- addr = where & ~3; +- mask = 0xffff0000 >> ((where % 4)*8); +- tval = __raw_readl(base + addr); +- tval = tval & ~mask; +- tval |= (value << ((4 - (where % 4))*8)) & mask; +- __raw_writel(tval, base + addr); ++ s = ((where & 2) * 8); ++ data &= ~(0xffff << s); ++ data |= ((value & 0xffff) << s); + break; + case 4: +- __raw_writel(value, (base + where)); ++ data = value; + break; + default: + spin_unlock_irqrestore(&ar724x_pci_lock, flags); +@@ -100,6 +97,9 @@ static int ar724x_pci_write(struct pci_b + return PCIBIOS_BAD_REGISTER_NUMBER; + } + ++ __raw_writel(data, base + (where & ~3)); ++ /* flush write */ ++ __raw_readl(base + (where & ~3)); + spin_unlock_irqrestore(&ar724x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; diff --git a/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch b/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch index 11391abe69..8ed823b59a 100644 --- a/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch +++ b/target/linux/ar71xx/patches-3.3/109-MIPS-ath79-add-a-workaround-for-a-PCI-controller-bug.patch @@ -1,7 +1,7 @@ -From b2ee3bd8706521c9bbf43405c767010927c101e5 Mon Sep 17 00:00:00 2001 +From 14eaf9b1cda516b4182e56f61c21fa2eaa9ade6b Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Mon, 21 Nov 2011 17:57:51 +0100 -Subject: [PATCH 11/35] MIPS: ath79: add a workaround for a PCI controller bug in AR7240 SoCs +Date: Wed, 14 Mar 2012 10:36:05 +0100 +Subject: [PATCH 14/47] MIPS: ath79: add a workaround for a PCI controller bug in AR7240 SoCs The PCI controller of the AR724X SoCs has a hardware bag. If the BAR0 register of the PCI device is set to @@ -56,9 +56,9 @@ Call Trace: [<80063c04>] kernel_thread_helper+0x10/0x18 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - apply the workaround on AR7240 only - - remove unrelated defines +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3494/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/pci/pci-ar724x.c | 36 +++++++++++++++++++++++++++++++++++- 1 files changed, 35 insertions(+), 1 deletions(-) diff --git a/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch b/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-a-wrong-IRQ-number.patch index ccb721d366..8702e65fc0 100644 --- a/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-fix-a-wrong-IRQ-number.patch +++ b/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-a-wrong-IRQ-number.patch @@ -1,7 +1,7 @@ -From cfb725275ea25857e8f0e3bf358fff7c84cc787c Mon Sep 17 00:00:00 2001 +From d710990df726cceffb62488e597ecfc4a9e13aa5 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 22 Nov 2011 13:59:39 +0100 -Subject: [PATCH 12/35] MIPS: ath79: fix a wrong IRQ number +Date: Wed, 14 Mar 2012 10:36:06 +0100 +Subject: [PATCH 15/47] MIPS: ath79: fix a wrong IRQ number The Ubiquiti XM board setup code uses an invalid IRQ number, because it if above of NR_IRQS. This @@ -16,11 +16,9 @@ AR71XX/AR724X SoCs, and use the correct IRQ number in the board setup code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - no changes - -The IRQ controller code is also missing, that will be -added in a separate patch. +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3495/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/mach-ubnt-xm.c | 5 +++-- arch/mips/include/asm/mach-ath79/irq.h | 6 +++++- diff --git a/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch b/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch deleted file mode 100644 index c3637e8eca..0000000000 --- a/target/linux/ar71xx/patches-3.3/110-MIPS-ath79-fix-broken-ar724x_pci_-read-write-functio.patch +++ /dev/null @@ -1,219 +0,0 @@ -From 2e535c334018d58b0bf6df583486abda5bfb2003 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 18 Nov 2011 22:25:30 +0100 -Subject: [PATCH 10/35] MIPS: ath79: fix broken ar724x_pci_{read,write} functions - -The current ar724x_pci_{read,write} functions are -broken. Due to that, pci_read_config_byte returns -with bogus values, and pci_write_config_{byte,word} -unconditionally clears the accessed PCI configuration -registers instead of changing the value of them. - -The patch fixes the broken functions, thus the PCI -configuration space can be accessed correctly. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - no changes - -Output of 'lspci -vv' without the patch: - -00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless -Network Adapter (PCI-Express) (rev 01) - Subsystem: Atheros Communications Inc. Device a091 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 0 - Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K] - Capabilities: [40] Power Management version 3 - Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- - Address: 00000000 Data: 0000 - Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us - ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 512 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- - LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - DevCap2: Completion Timeout: Not Supported, TimeoutDis+ - DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- - LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB - Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- - Compliance De-emphasis: -6dB - LnkSta2: Current De-emphasis Level: -6dB - -Output of 'lspci -vv' with the patch: - -00:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless -Network Adapter (PCI-Express) (rev 01) - Subsystem: Atheros Communications Inc. Device a091 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 48 - Region 0: Memory at 10000000 (64-bit, non-prefetchable) [size=64K] - Capabilities: [40] Power Management version 3 - Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- - Address: 00000000 Data: 0000 - Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us - ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 512 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- - LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - DevCap2: Completion Timeout: Not Supported, TimeoutDis+ - DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- - LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB - Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- - Compliance De-emphasis: -6dB - LnkSta2: Current De-emphasis Level: -6dB - Capabilities: [100 v1] Advanced Error Reporting - UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- - UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- - UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- - CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- - CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ - AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- - Capabilities: [140 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff - Status: NegoPending- InProgress- - Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12 - Capabilities: [170 v1] Power Budgeting <?> ---- - arch/mips/pci/pci-ar724x.c | 52 ++++++++++++++++++++++---------------------- - 1 files changed, 26 insertions(+), 26 deletions(-) - ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -22,8 +22,9 @@ static void __iomem *ar724x_pci_devcfg_b - static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, uint32_t *value) - { -- unsigned long flags, addr, tval, mask; -+ unsigned long flags; - void __iomem *base; -+ u32 data; - - if (devfn) - return PCIBIOS_DEVICE_NOT_FOUND; -@@ -31,24 +32,22 @@ static int ar724x_pci_read(struct pci_bu - base = ar724x_pci_devcfg_base; - - spin_lock_irqsave(&ar724x_pci_lock, flags); -+ data = __raw_readl(base + (where & ~3)); - - switch (size) { - case 1: -- addr = where & ~3; -- mask = 0xff000000 >> ((where % 4) * 8); -- tval = __raw_readl(base + addr); -- tval = tval & ~mask; -- *value = (tval >> ((4 - (where % 4))*8)); -+ if (where & 1) -+ data >>= 8; -+ if (where & 2) -+ data >>= 16; -+ data &= 0xff; - break; - case 2: -- addr = where & ~3; -- mask = 0xffff0000 >> ((where % 4)*8); -- tval = __raw_readl(base + addr); -- tval = tval & ~mask; -- *value = (tval >> ((4 - (where % 4))*8)); -+ if (where & 2) -+ data >>= 16; -+ data &= 0xffff; - break; - case 4: -- *value = __raw_readl(base + where); - break; - default: - spin_unlock_irqrestore(&ar724x_pci_lock, flags); -@@ -57,6 +56,7 @@ static int ar724x_pci_read(struct pci_bu - } - - spin_unlock_irqrestore(&ar724x_pci_lock, flags); -+ *value = data; - - return PCIBIOS_SUCCESSFUL; - } -@@ -64,8 +64,10 @@ static int ar724x_pci_read(struct pci_bu - static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, uint32_t value) - { -- unsigned long flags, tval, addr, mask; -+ unsigned long flags; - void __iomem *base; -+ u32 data; -+ int s; - - if (devfn) - return PCIBIOS_DEVICE_NOT_FOUND; -@@ -73,26 +75,21 @@ static int ar724x_pci_write(struct pci_b - base = ar724x_pci_devcfg_base; - - spin_lock_irqsave(&ar724x_pci_lock, flags); -+ data = __raw_readl(base + (where & ~3)); - - switch (size) { - case 1: -- addr = where & ~3; -- mask = 0xff000000 >> ((where % 4)*8); -- tval = __raw_readl(base + addr); -- tval = tval & ~mask; -- tval |= (value << ((4 - (where % 4))*8)) & mask; -- __raw_writel(tval, base + addr); -+ s = ((where & 3) * 8); -+ data &= ~(0xff << s); -+ data |= ((value & 0xff) << s); - break; - case 2: -- addr = where & ~3; -- mask = 0xffff0000 >> ((where % 4)*8); -- tval = __raw_readl(base + addr); -- tval = tval & ~mask; -- tval |= (value << ((4 - (where % 4))*8)) & mask; -- __raw_writel(tval, base + addr); -+ s = ((where & 2) * 8); -+ data &= ~(0xffff << s); -+ data |= ((value & 0xffff) << s); - break; - case 4: -- __raw_writel(value, (base + where)); -+ data = value; - break; - default: - spin_unlock_irqrestore(&ar724x_pci_lock, flags); -@@ -100,6 +97,9 @@ static int ar724x_pci_write(struct pci_b - return PCIBIOS_BAD_REGISTER_NUMBER; - } - -+ __raw_writel(data, base + (where & ~3)); -+ /* flush write */ -+ __raw_readl(base + (where & ~3)); - spin_unlock_irqrestore(&ar724x_pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; diff --git a/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch b/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch index 6da2df4993..0c15a54967 100644 --- a/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch +++ b/target/linux/ar71xx/patches-3.3/111-MIPS-ath79-add-PCI-IRQ-handling-code-for-AR724X-SoCs.patch @@ -1,7 +1,7 @@ -From a4fbc2dec67a5d760e25e3c3a6c392191a5405c6 Mon Sep 17 00:00:00 2001 +From 1fd24b552708544ca6233ff7ba60342e9f7e5582 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 22 Nov 2011 14:11:19 +0100 -Subject: [PATCH 13/35] MIPS: ath79: add PCI IRQ handling code for AR724X SoCs +Date: Wed, 14 Mar 2012 10:36:07 +0100 +Subject: [PATCH 16/47] MIPS: ath79: add PCI IRQ handling code for AR724X SoCs The PCI Host Controller of the AR724x SoC has a built-in IRQ controller. The current code does @@ -16,9 +16,9 @@ This patch adds support for the IRQ controller in order to make PCI IRQs work. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - move the interrupt controller related defines from - the workaround patch +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3496/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/pci.c | 3 +- arch/mips/include/asm/mach-ath79/pci.h | 4 +- @@ -53,8 +53,8 @@ v2: - move the interrupt controller related defines from -int ar724x_pcibios_init(void); +int ar724x_pcibios_init(int irq); #else --static inline int ar724x_pcibios_init(void) { return 0 }; -+static inline int ar724x_pcibios_init(int irq) { return 0 }; +-static inline int ar724x_pcibios_init(void) { return 0; } ++static inline int ar724x_pcibios_init(int irq) { return 0; } #endif #endif /* __ASM_MACH_ATH79_PCI_H */ diff --git a/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch b/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch index 17776ada90..4ef080541d 100644 --- a/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch +++ b/target/linux/ar71xx/patches-3.3/112-MIPS-ath79-get-rid-of-some-ifdefs-in-mach-ubnt-xm.c.patch @@ -1,15 +1,16 @@ -From adeefb0860e92f44c7d66d5fccdb217fccfb8a81 Mon Sep 17 00:00:00 2001 +From b2ab491ed634a4c0b7af5f11940e0ca42b1a87c8 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 20 Nov 2011 10:19:08 +0100 -Subject: [PATCH 14/35] MIPS: ath79: get rid of some ifdefs in mach-ubnt-xm.c +Date: Wed, 14 Mar 2012 10:36:08 +0100 +Subject: [PATCH 17/47] MIPS: ath79: get rid of some ifdefs in mach-ubnt-xm.c Remove a superfluous ifdef around an include. Also reorganize the board setup code a bit, so another ifdef can be removed. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3497/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/mach-ubnt-xm.c | 23 ++++++++++++----------- 1 files changed, 12 insertions(+), 11 deletions(-) diff --git a/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch b/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch index 91430a4a1a..38765b0a9e 100644 --- a/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch +++ b/target/linux/ar71xx/patches-3.3/113-MIPS-ath79-allow-to-use-board-specific-pci_plat_dev_.patch @@ -1,7 +1,7 @@ -From 83d74abc7d549f5d6292b0474be080983239c0bd Mon Sep 17 00:00:00 2001 +From 2b62c9d685d9bb048a006b695683b2a812c0a847 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 20 Nov 2011 10:29:36 +0100 -Subject: [PATCH 15/35] MIPS: ath79: allow to use board specific pci_plat_dev_init functions +Date: Wed, 14 Mar 2012 10:36:09 +0100 +Subject: [PATCH 18/47] MIPS: ath79: allow to use board specific pci_plat_dev_init functions Th current implementation causes NULL pointer dereference if 'pci_data' is not set: @@ -47,11 +47,9 @@ The patch allows the board setup code to specify a board specific function if that is required. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - no changes - -The pci_irq_map function can throw another NULL pointer -dereference, that will be fixed in a subsequent patch. +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3499/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/mach-ubnt-xm.c | 13 ++++++++++++- arch/mips/ath79/pci.c | 14 ++++++++------ diff --git a/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch b/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch index 78e8bd56c6..4021af2ca6 100644 --- a/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch +++ b/target/linux/ar71xx/patches-3.3/114-MIPS-ath79-add-support-for-the-PCI-host-controller-o.patch @@ -1,7 +1,7 @@ -From 9f6d46372cf2a493eaeeffbefe0a796379f838fa Mon Sep 17 00:00:00 2001 +From 4201b6aeb059b481571c241a2fc96fd3f41032e9 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 22 Nov 2011 22:54:32 +0100 -Subject: [PATCH 16/35] MIPS: ath79: add support for the PCI host controller of the AR71XX SoCs +Date: Wed, 14 Mar 2012 10:36:10 +0100 +Subject: [PATCH 19/47] MIPS: ath79: add support for the PCI host controller of the AR71XX SoCs The Atheros AR71XX SoCs have a built-in PCI Host Controller. This patch adds a driver for that, and modifies the relevant @@ -10,8 +10,9 @@ board specific setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> - -v2: - add missing pci-ar71xx.c +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3498/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/Kconfig | 1 + arch/mips/include/asm/mach-ath79/pci.h | 6 + @@ -39,7 +40,7 @@ v2: - add missing pci-ar71xx.c +#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX) +int ar71xx_pcibios_init(void); +#else -+static inline int ar71xx_pcibios_init(void) { return 0 }; ++static inline int ar71xx_pcibios_init(void) { return 0; } +#endif + #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X) diff --git a/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch b/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch index 251de55e54..7daaf1923b 100644 --- a/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch +++ b/target/linux/ar71xx/patches-3.3/115-MIPS-ath79-allow-to-use-SoC-specific-PCI-IRQ-maps.patch @@ -1,7 +1,7 @@ -From 8a1a5852aa7f8cfc027b2b0bb51cbbac4309e144 Mon Sep 17 00:00:00 2001 +From fd1dd2f2c317bc0fc2c30fba440d911654bf592e Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 20 Nov 2011 14:32:09 +0100 -Subject: [PATCH 17/35] MIPS: ath79: allow to use SoC specific PCI IRQ maps +Date: Wed, 14 Mar 2012 10:36:11 +0100 +Subject: [PATCH 20/47] MIPS: ath79: allow to use SoC specific PCI IRQ maps The PCI controllers in the AR71XX and in the AR724X SoCs are different, and both of them @@ -14,8 +14,9 @@ which lets the board setup code to override the default IRQ map. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3500/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/pci.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++--- arch/mips/ath79/pci.h | 9 ++++++ diff --git a/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch b/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-remove-ar724x_pci_add_data-function.patch index 1ce9804370..70013c8d92 100644 --- a/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-remove-ar724x_pci_add_data-function.patch +++ b/target/linux/ar71xx/patches-3.3/116-MIPS-ath79-remove-ar724x_pci_add_data-function.patch @@ -1,14 +1,15 @@ -From 0b026adc7a471edd018a060427e62d06e54be2bc Mon Sep 17 00:00:00 2001 +From 29398cf1212afc9a6474127259cbb3a48d0751e5 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 20 Nov 2011 15:50:32 +0100 -Subject: [PATCH 18/35] MIPS: ath79: remove ar724x_pci_add_data function +Date: Wed, 14 Mar 2012 10:36:12 +0100 +Subject: [PATCH 21/47] MIPS: ath79: remove ar724x_pci_add_data function The variables set by this function are not used anymore. Remove the function and the relevant variables as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3501/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/mach-ubnt-xm.c | 7 ------- arch/mips/ath79/pci.c | 8 -------- diff --git a/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch b/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch index 36d17e9fa1..969b79d8b2 100644 --- a/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch +++ b/target/linux/ar71xx/patches-3.3/117-MIPS-ath79-register-PCI-controller-on-the-PB44-board.patch @@ -1,14 +1,15 @@ -From 1759a5bc87d0eb8dbb0d8a9794b336813057eb88 Mon Sep 17 00:00:00 2001 +From 12db6a98b438a50799873bfd2b736a3b02a4bd57 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Thu, 25 Nov 2010 17:59:28 +0100 -Subject: [PATCH 19/35] MIPS: ath79: register PCI controller on the PB44 board +Date: Wed, 14 Mar 2012 10:36:13 +0100 +Subject: [PATCH 22/47] MIPS: ath79: register PCI controller on the PB44 board The PB44 reference board has two miniPCI slots. Register the PCI controller to make those usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> - -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3502/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/mach-pb44.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch b/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch index 486e6f97c3..da173a5f1d 100644 --- a/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch +++ b/target/linux/ar71xx/patches-3.3/118-MIPS-ath79-update-copyright-headers-of-PCI-related-f.patch @@ -1,22 +1,16 @@ -From e83c294ff219ff709b8179cbff64f293199a6dad Mon Sep 17 00:00:00 2001 +From d3b5329b89d1bc733c56e4d609a89b429bf6cd4e Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Tue, 22 Nov 2011 21:13:58 +0100 -Subject: [PATCH 20/35] MIPS: ath79: update copyright headers of PCI related files +Date: Wed, 14 Mar 2012 10:36:14 +0100 +Subject: [PATCH 23/47] MIPS: ath79: update copyright headers of PCI related files Add copyright records according to the recent changes in the PCI code. Also fix up the descriptions. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> - -Just in case if someone is curious about why 2008 and 2009 years are -present in this change: - -The recent PCI specific changes were based on an existing -code which can be found in the OpenWrt repository, and we -are working on that since 2008. - -v2: - no changes +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/3503/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/pci.c | 4 ++++ arch/mips/ath79/pci.h | 4 +++- diff --git a/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-add-early_printk-support-for-AR934X.patch index d22aedec6a..512f2da100 100644 --- a/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-early_printk-support-for-AR934X.patch +++ b/target/linux/ar71xx/patches-3.3/119-MIPS-ath79-add-early_printk-support-for-AR934X.patch @@ -1,13 +1,17 @@ -From f60aed87f838ecfa4033ff1f63f97d05359b3b51 Mon Sep 17 00:00:00 2001 +From 5c1f1041309ede56d48eb3c665025e87c9824a64 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 11 Dec 2011 17:36:08 +0100 -Subject: [PATCH 21/35] MIPS: ath79: add early_printk support for AR934X +Date: Wed, 14 Mar 2012 10:45:19 +0100 +Subject: [PATCH 24/47] MIPS: ath79: add early_printk support for AR934X The patch allows to see kernel messages on AR934X SoCs in early boot stage. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3504/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/early_printk.c | 3 +++ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 6 +++++- diff --git a/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch b/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch index dc545330d6..afbb04e4fc 100644 --- a/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch +++ b/target/linux/ar71xx/patches-3.3/120-MIPS-ath79-sort-case-statements-in-ath79_detect_sys_.patch @@ -1,13 +1,17 @@ -From 655a57ed2df5e34c32645e08c3244facba70ae5f Mon Sep 17 00:00:00 2001 +From ccb089bbbe49949063cc348743605b3d813ca1c0 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 9 Dec 2011 14:39:04 +0100 -Subject: [PATCH 22/35] MIPS: ath79: sort case statements in ath79_detect_sys_type +Date: Wed, 14 Mar 2012 10:45:20 +0100 +Subject: [PATCH 25/47] MIPS: ath79: sort case statements in ath79_detect_sys_type Sort the case statements alphabetically in order to improve readability. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3505/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/setup.c | 24 ++++++++++++------------ 1 files changed, 12 insertions(+), 12 deletions(-) diff --git a/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch index f503ad1956..59bb3d8c5d 100644 --- a/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch +++ b/target/linux/ar71xx/patches-3.3/121-MIPS-ath79-add-SoC-detection-code-for-AR934X.patch @@ -1,13 +1,17 @@ -From 9c19e86a7eccf8efd159ba213290830164f33a71 Mon Sep 17 00:00:00 2001 +From bf5cb424312f28e51803286a53cb8613bedc5bc8 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 11 Dec 2011 17:36:42 +0100 -Subject: [PATCH 23/35] MIPS: ath79: add SoC detection code for AR934X +Date: Wed, 14 Mar 2012 10:45:21 +0100 +Subject: [PATCH 26/47] MIPS: ath79: add SoC detection code for AR934X Also add 'soc_is_ar934[124x]' helper functions and a Kconfig symbol for the AR934X SoCs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3506/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/Kconfig | 4 ++++ arch/mips/ath79/setup.c | 21 ++++++++++++++++++++- diff --git a/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch index fd7976faf0..39e161cc20 100644 --- a/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch +++ b/target/linux/ar71xx/patches-3.3/122-MIPS-ath79-add-clock-initialization-code-for-AR934X.patch @@ -1,10 +1,14 @@ -From 783addfa256e79892f889e95ec5cda34f4e91eb7 Mon Sep 17 00:00:00 2001 +From e9706fc0a97feb7992a98806b69a1fc1fcb910c7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 9 Dec 2011 20:36:32 +0100 -Subject: [PATCH 24/35] MIPS: ath79: add clock initialization code for AR934X +Date: Wed, 14 Mar 2012 10:45:22 +0100 +Subject: [PATCH 27/47] MIPS: ath79: add clock initialization code for AR934X Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3507/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/clock.c | 81 ++++++++++++++++++++++++ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 53 +++++++++++++++ diff --git a/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch index f406db90e6..77c8d5a57c 100644 --- a/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch +++ b/target/linux/ar71xx/patches-3.3/123-MIPS-ath79-add-GPIO-support-code-for-AR934X.patch @@ -1,10 +1,14 @@ -From c01b6005cfa2d762c2de33d5be2e82f91afaa66f Mon Sep 17 00:00:00 2001 +From 77bb01d1919bcb6787d5cde9056936420288ab34 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 9 Dec 2011 20:53:47 +0100 -Subject: [PATCH 25/35] MIPS: ath79: add GPIO support code for AR934X +Date: Wed, 14 Mar 2012 10:45:23 +0100 +Subject: [PATCH 28/47] MIPS: ath79: add GPIO support code for AR934X Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3508/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/gpio.c | 47 +++++++++++++++++++++++- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + diff --git a/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch b/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch index 144acacf4a..0f30d3836f 100644 --- a/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch +++ b/target/linux/ar71xx/patches-3.3/124-MIPS-ath79-rework-IP2-IP3-interrupt-handling.patch @@ -1,7 +1,7 @@ -From e69d89040d4884ea4069352338f555694e65fe70 Mon Sep 17 00:00:00 2001 +From f44c70eb5368c0742a8f401ccf39f2ba7252f5a7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 9 Dec 2011 21:30:03 +0100 -Subject: [PATCH 26/35] MIPS: ath79: rework IP2/IP3 interrupt handling +Date: Wed, 14 Mar 2012 10:45:24 +0100 +Subject: [PATCH 29/47] MIPS: ath79: rework IP2/IP3 interrupt handling The current implementation assumes that flushing the DDR writeback buffer is required for IP2/IP3 interrupts, @@ -12,6 +12,10 @@ the buffers in the dispatcher code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3509/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/irq.c | 92 ++++++++++++++++++++++++++++++++++++++----------- 1 files changed, 72 insertions(+), 20 deletions(-) diff --git a/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch index 083ca33189..1268077255 100644 --- a/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch +++ b/target/linux/ar71xx/patches-3.3/125-MIPS-ath79-add-IRQ-handling-code-for-AR934X.patch @@ -1,10 +1,14 @@ -From 9db6021011556948d2d28d6957cee451bc2985aa Mon Sep 17 00:00:00 2001 +From b16fdecf14d24fe213c81409c0c2dca66d5b7bc9 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 9 Dec 2011 21:59:50 +0100 -Subject: [PATCH 27/35] MIPS: ath79: add IRQ handling code for AR934X +Date: Wed, 14 Mar 2012 10:45:25 +0100 +Subject: [PATCH 30/47] MIPS: ath79: add IRQ handling code for AR934X Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3510/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/irq.c | 55 +++++++++++++++++++++++- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 25 +++++++++++ diff --git a/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch b/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch index dc9df92fcf..14d4a27d16 100644 --- a/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch +++ b/target/linux/ar71xx/patches-3.3/126-MIPS-ath79-add-AR934X-specific-glue-to-ath79_device_.patch @@ -1,10 +1,14 @@ -From da0f20f8a99de9193fc484a25d1f9edc913c98fd Mon Sep 17 00:00:00 2001 +From 98bfbb0b3f126d93076377fcd9553a493e45e304 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 10 Dec 2011 20:09:39 +0100 -Subject: [PATCH 28/35] MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set} +Date: Wed, 14 Mar 2012 10:45:26 +0100 +Subject: [PATCH 31/47] MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set} Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3511/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/common.c | 9 ++++++++- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 + diff --git a/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch b/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch index db5ae6164a..2c7eecabf7 100644 --- a/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch +++ b/target/linux/ar71xx/patches-3.3/127-MIPS-ath79-register-UART-device-for-AR934X-SoCs.patch @@ -1,10 +1,14 @@ -From 6b6803a249a27aa708bc5f24aa15270e30f3de61 Mon Sep 17 00:00:00 2001 +From 2d4ed1c7405d05da812b67830eaac15f43b862b7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 10 Dec 2011 19:55:05 +0100 -Subject: [PATCH 29/35] MIPS: ath79: register UART device for AR934X SoCs +Date: Wed, 14 Mar 2012 10:45:27 +0100 +Subject: [PATCH 32/47] MIPS: ath79: register UART device for AR934X SoCs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3512/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/dev-common.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch index ca7c9289ca..adbe3e4bb5 100644 --- a/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch +++ b/target/linux/ar71xx/patches-3.3/128-MIPS-ath79-add-WMAC-registration-code-for-AR934X.patch @@ -1,10 +1,14 @@ -From 58b69cf52387a7351ec13b52d3d6a495fe611c29 Mon Sep 17 00:00:00 2001 +From d677877e2688813e5e0c12d0228a631021ed70c4 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 9 Dec 2011 22:07:23 +0100 -Subject: [PATCH 30/35] MIPS: ath79: add WMAC registration code for AR934X +Date: Wed, 14 Mar 2012 10:45:28 +0100 +Subject: [PATCH 33/47] MIPS: ath79: add WMAC registration code for AR934X Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3513/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/Kconfig | 2 +- arch/mips/ath79/dev-wmac.c | 30 ++++++++++++++++++++++- diff --git a/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch b/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch index 62e95df955..27a46e6388 100644 --- a/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch +++ b/target/linux/ar71xx/patches-3.3/129-MIPS-ath79-add-PCI_AR724X-Kconfig-symbol.patch @@ -1,7 +1,7 @@ -From f299f36542f81f05cff7cdebb50abde202faf6df Mon Sep 17 00:00:00 2001 +From 27a5b2948831f4fd8e66e2e1a98b4c23902728cc Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 17 Dec 2011 10:04:18 +0100 -Subject: [PATCH 32/35] MIPS: ath79: add PCI_AR724X Kconfig symbol +Date: Wed, 14 Mar 2012 10:45:29 +0100 +Subject: [PATCH 34/47] MIPS: ath79: add PCI_AR724X Kconfig symbol The AR724X specific PCI code can be used for the AR934X SoCs, however it can be selected only if @@ -12,6 +12,10 @@ to use the code for AR934X as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3514/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/Kconfig | 4 ++++ arch/mips/include/asm/mach-ath79/pci.h | 2 +- @@ -41,14 +45,14 @@ Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> --- a/arch/mips/include/asm/mach-ath79/pci.h +++ b/arch/mips/include/asm/mach-ath79/pci.h @@ -19,7 +19,7 @@ int ar71xx_pcibios_init(void); - static inline int ar71xx_pcibios_init(void) { return 0 }; + static inline int ar71xx_pcibios_init(void) { return 0; } #endif -#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR724X) +#if defined(CONFIG_PCI_AR724X) int ar724x_pcibios_init(int irq); #else - static inline int ar724x_pcibios_init(int irq) { return 0 }; + static inline int ar724x_pcibios_init(int irq) { return 0; } --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o diff --git a/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch index 7f168b33e7..bd9386d8c9 100644 --- a/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch +++ b/target/linux/ar71xx/patches-3.3/130-MIPS-ath79-add-PCI-registration-code-for-AR934X.patch @@ -1,10 +1,14 @@ -From e30d942814a606c5258c7adafc6bbb49836573e9 Mon Sep 17 00:00:00 2001 +From 902b348cdddd4c858993e02aced615aa6caf04d0 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Sat, 17 Dec 2011 10:13:08 +0100 -Subject: [PATCH 33/35] MIPS: ath79: add PCI registration code for AR934X +Date: Wed, 14 Mar 2012 10:45:30 +0100 +Subject: [PATCH 35/47] MIPS: ath79: add PCI registration code for AR934X Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3516/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- arch/mips/ath79/Kconfig | 2 ++ arch/mips/ath79/pci.c | 13 ++++++++++++- diff --git a/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch deleted file mode 100644 index 7ac304fe81..0000000000 --- a/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch +++ /dev/null @@ -1,107 +0,0 @@ -From 2d832612094b5592641364773c5ab2a3658f7120 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 11 Dec 2011 18:34:13 +0100 -Subject: [PATCH 31/35] MIPS: ath79: add USB platform setup code for AR934X - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> ---- - arch/mips/ath79/dev-usb.c | 28 +++++++++++++++++++ - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 35 ++++++++++++++++++++++++ - 2 files changed, 63 insertions(+), 0 deletions(-) - ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -180,6 +180,32 @@ static void __init ar933x_usb_setup(void - platform_device_register(&ath79_ehci_device); - } - -+static void __init ar934x_usb_setup(void) -+{ -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -+ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) -+ return; -+ -+ ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE); -+ udelay(1000); -+ -+ ath79_device_reset_set(AR934X_RESET_USB_PHY); -+ udelay(1000); -+ -+ ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG); -+ udelay(1000); -+ -+ ath79_device_reset_set(AR934X_RESET_USB_HOST); -+ udelay(1000); -+ -+ ath79_ehci_resources[0].start = AR934X_EHCI_BASE; -+ ath79_ehci_resources[0].end = AR934X_EHCI_BASE + AR934X_EHCI_SIZE - 1; -+ ath79_ehci_device.name = "ar934x-ehci"; -+ platform_device_register(&ath79_ehci_device); -+} -+ - void __init ath79_register_usb(void) - { - if (soc_is_ar71xx()) -@@ -192,6 +218,8 @@ void __init ath79_register_usb(void) - ar913x_usb_setup(); - else if (soc_is_ar933x()) - ar933x_usb_setup(); -+ else if (soc_is_ar934x()) -+ ar934x_usb_setup(); - else - BUG(); - } ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -63,6 +63,8 @@ - - #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR934X_WMAC_SIZE 0x20000 -+#define AR934X_EHCI_BASE 0x1b000000 -+#define AR934X_EHCI_SIZE 0x1000 - - /* - * DDR_CTRL block -@@ -288,6 +290,39 @@ - #define AR933X_RESET_USB_PHY BIT(4) - #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -+#define AR934X_RESET_HOST BIT(31) -+#define AR934X_RESET_SLIC BIT(30) -+#define AR934X_RESET_HDMA BIT(29) -+#define AR934X_RESET_EXTERNAL BIT(28) -+#define AR934X_RESET_RTC BIT(27) -+#define AR934X_RESET_PCIE_EP_INT BIT(26) -+#define AR934X_RESET_CHKSUM_ACC BIT(25) -+#define AR934X_RESET_FULL_CHIP BIT(24) -+#define AR934X_RESET_GE1_MDIO BIT(23) -+#define AR934X_RESET_GE0_MDIO BIT(22) -+#define AR934X_RESET_CPU_NMI BIT(21) -+#define AR934X_RESET_CPU_COLD BIT(20) -+#define AR934X_RESET_HOST_RESET_INT BIT(19) -+#define AR934X_RESET_PCIE_EP BIT(18) -+#define AR934X_RESET_UART1 BIT(17) -+#define AR934X_RESET_DDR BIT(16) -+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define AR934X_RESET_NANDF BIT(14) -+#define AR934X_RESET_GE1_MAC BIT(13) -+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) -+#define AR934X_RESET_USB_PHY_ANALOG BIT(11) -+#define AR934X_RESET_HOST_DMA_INT BIT(10) -+#define AR934X_RESET_GE0_MAC BIT(9) -+#define AR934X_RESET_ETH_SIWTCH BIT(8) -+#define AR934X_RESET_PCIE_PHY BIT(7) -+#define AR934X_RESET_PCIE BIT(6) -+#define AR934X_RESET_USB_HOST BIT(5) -+#define AR934X_RESET_USB_PHY BIT(4) -+#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -+#define AR934X_RESET_LUT BIT(2) -+#define AR934X_RESET_MBOX BIT(1) -+#define AR934X_RESET_I2S BIT(0) -+ - #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - - #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) diff --git a/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch b/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch index 3f6c3e2adb..30c2c1b187 100644 --- a/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch +++ b/target/linux/ar71xx/patches-3.3/131-MIPS-ath79-add-initial-support-for-the-Atheros-DB120.patch @@ -1,16 +1,20 @@ -From a01e8727327cf0fb6382ca8700a3a3f73d93202a Mon Sep 17 00:00:00 2001 +From 4921cb7d9f6997b6f7aefd37c7cfd50324e8fd75 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> -Date: Fri, 9 Dec 2011 22:23:02 +0100 -Subject: [PATCH 34/35] MIPS: ath79: add initial support for the Atheros DB120 board +Date: Wed, 14 Mar 2012 20:39:35 +0100 +Subject: [PATCH 36/47] MIPS: ath79: add initial support for the Atheros DB120 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +Cc: linux-mips@linux-mips.org +Cc: mcgrof@infradead.org +Patchwork: https://patchwork.linux-mips.org/patch/3517/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> --- - arch/mips/ath79/Kconfig | 12 +++ + arch/mips/ath79/Kconfig | 12 ++++ arch/mips/ath79/Makefile | 1 + - arch/mips/ath79/mach-db120.c | 155 ++++++++++++++++++++++++++++++++++++++++++ + arch/mips/ath79/mach-db120.c | 134 ++++++++++++++++++++++++++++++++++++++++++ arch/mips/ath79/machtypes.h | 1 + - 4 files changed, 169 insertions(+), 0 deletions(-) + 4 files changed, 148 insertions(+), 0 deletions(-) create mode 100644 arch/mips/ath79/mach-db120.c --- a/arch/mips/ath79/Kconfig @@ -45,44 +49,25 @@ Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o --- /dev/null +++ b/arch/mips/ath79/mach-db120.c -@@ -0,0 +1,155 @@ +@@ -0,0 +1,134 @@ +/* + * Atheros DB120 reference board support + * + * Copyright (c) 2011 Qualcomm Atheros + * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> + * -+ * All rights reserved. ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. + * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted (subject to the limitations in the -+ * disclaimer below) provided that the following conditions are met: ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the -+ * distribution. -+ * -+ * * Neither the name of Qualcomm Atheros nor the names of its -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE -+ * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT -+ * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/pci.h> @@ -92,7 +77,6 @@ Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" -+#include "dev-usb.h" +#include "dev-wmac.h" +#include "pci.h" + @@ -194,7 +178,6 @@ Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> + db120_gpio_keys); + ath79_register_spi(&db120_spi_data, db120_spi_info, + ARRAY_SIZE(db120_spi_info)); -+ ath79_register_usb(); + ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); + db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); +} diff --git a/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-use-correct-IRQ-number-for-the-OHCI-contr.patch b/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-use-correct-IRQ-number-for-the-OHCI-contr.patch new file mode 100644 index 0000000000..07ddb512d6 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/132-MIPS-ath79-use-correct-IRQ-number-for-the-OHCI-contr.patch @@ -0,0 +1,37 @@ +From fe0cc1327ddfb69b171102019a8148a9c8b352b8 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Wed, 28 Mar 2012 11:00:19 +0200 +Subject: [PATCH 37/47] MIPS: ath79: use correct IRQ number for the OHCI controller on AR7240 + +The currently assigned IRQ number to the OHCI +controller is incorrect for the AR7240 SoC, and +that leads to the following error message from +the OHCI driver: + +ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver +ath79-ohci ath79-ohci: Atheros built-in OHCI controller +ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 1 +ath79-ohci ath79-ohci: irq 14, io mem 0x1b000000 +hub 1-0:1.0: USB hub found +hub 1-0:1.0: 1 port detected +usb 1-1: new full-speed USB device number 2 using ath79-ohci +ath79-ohci ath79-ohci: Unlink after no-IRQ? Controller is probably using the wrong IRQ. + +Fix this by using the correct IRQ number. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + arch/mips/ath79/dev-usb.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void + + ath79_ohci_resources[0].start = AR7240_OHCI_BASE; + ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; ++ ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; ++ ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; + platform_device_register(&ath79_ohci_device); + } + diff --git a/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-use-a-helper-function-for-USB-resource-in.patch b/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-use-a-helper-function-for-USB-resource-in.patch new file mode 100644 index 0000000000..0def09f130 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/133-MIPS-ath79-use-a-helper-function-for-USB-resource-in.patch @@ -0,0 +1,140 @@ +From 30b15d9a4b05e38ae19e340b63e1a2bca917d557 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Wed, 28 Mar 2012 14:15:23 +0200 +Subject: [PATCH 38/47] MIPS: ath79: use a helper function for USB resource initialization + +This improves code readability, and ensures that +all resource fields will be initialized correctly. +Additionally, it helps to reduce the size of the +kernel image by using uninitialized resource +variables. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + arch/mips/ath79/dev-usb.c | 64 +++++++++++++++++++------------------------- + 1 files changed, 28 insertions(+), 36 deletions(-) + +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -25,17 +25,7 @@ + #include "common.h" + #include "dev-usb.h" + +-static struct resource ath79_ohci_resources[] = { +- [0] = { +- /* .start and .end fields are filled dynamically */ +- .flags = IORESOURCE_MEM, +- }, +- [1] = { +- .start = ATH79_MISC_IRQ_OHCI, +- .end = ATH79_MISC_IRQ_OHCI, +- .flags = IORESOURCE_IRQ, +- }, +-}; ++static struct resource ath79_ohci_resources[2]; + + static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32); + +@@ -54,17 +44,7 @@ static struct platform_device ath79_ohci + }, + }; + +-static struct resource ath79_ehci_resources[] = { +- [0] = { +- /* .start and .end fields are filled dynamically */ +- .flags = IORESOURCE_MEM, +- }, +- [1] = { +- .start = ATH79_CPU_IRQ_USB, +- .end = ATH79_CPU_IRQ_USB, +- .flags = IORESOURCE_IRQ, +- }, +-}; ++static struct resource ath79_ehci_resources[2]; + + static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32); + +@@ -90,6 +70,20 @@ static struct platform_device ath79_ehci + }, + }; + ++static void __init ath79_usb_init_resource(struct resource res[2], ++ unsigned long base, ++ unsigned long size, ++ int irq) ++{ ++ res[0].flags = IORESOURCE_MEM; ++ res[0].start = base; ++ res[0].end = base + size - 1; ++ ++ res[1].flags = IORESOURCE_IRQ; ++ res[1].start = irq; ++ res[1].end = irq; ++} ++ + #define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ + AR71XX_RESET_USB_PHY | \ + AR71XX_RESET_USB_OHCI_DLL) +@@ -114,12 +108,12 @@ static void __init ath79_usb_setup(void) + + mdelay(900); + +- ath79_ohci_resources[0].start = AR71XX_OHCI_BASE; +- ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1; ++ ath79_usb_init_resource(ath79_ohci_resources, AR71XX_OHCI_BASE, ++ AR71XX_OHCI_SIZE, ATH79_MISC_IRQ_OHCI); + platform_device_register(&ath79_ohci_device); + +- ath79_ehci_resources[0].start = AR71XX_EHCI_BASE; +- ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1; ++ ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE, ++ AR71XX_EHCI_SIZE, ATH79_CPU_IRQ_USB); + ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1; + platform_device_register(&ath79_ehci_device); + } +@@ -143,10 +137,8 @@ static void __init ar7240_usb_setup(void + + iounmap(usb_ctrl_base); + +- ath79_ohci_resources[0].start = AR7240_OHCI_BASE; +- ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; +- ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; +- ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; ++ ath79_usb_init_resource(ath79_ohci_resources, AR7240_OHCI_BASE, ++ AR7240_OHCI_SIZE, ATH79_CPU_IRQ_USB); + platform_device_register(&ath79_ohci_device); + } + +@@ -161,8 +153,8 @@ static void __init ar724x_usb_setup(void + ath79_device_reset_clear(AR724X_RESET_USB_PHY); + mdelay(10); + +- ath79_ehci_resources[0].start = AR724X_EHCI_BASE; +- ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1; ++ ath79_usb_init_resource(ath79_ehci_resources, AR724X_EHCI_BASE, ++ AR724X_EHCI_SIZE, ATH79_CPU_IRQ_USB); + ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; + platform_device_register(&ath79_ehci_device); + } +@@ -178,8 +170,8 @@ static void __init ar913x_usb_setup(void + ath79_device_reset_clear(AR913X_RESET_USB_PHY); + mdelay(10); + +- ath79_ehci_resources[0].start = AR913X_EHCI_BASE; +- ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1; ++ ath79_usb_init_resource(ath79_ehci_resources, AR913X_EHCI_BASE, ++ AR913X_EHCI_SIZE, ATH79_CPU_IRQ_USB); + ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; + platform_device_register(&ath79_ehci_device); + } +@@ -195,8 +187,8 @@ static void __init ar933x_usb_setup(void + ath79_device_reset_clear(AR933X_RESET_USB_PHY); + mdelay(10); + +- ath79_ehci_resources[0].start = AR933X_EHCI_BASE; +- ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1; ++ ath79_usb_init_resource(ath79_ehci_resources, AR933X_EHCI_BASE, ++ AR933X_EHCI_SIZE, ATH79_CPU_IRQ_USB); + ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; + platform_device_register(&ath79_ehci_device); + } diff --git a/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch b/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch new file mode 100644 index 0000000000..2a287ecaa6 --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/134-MIPS-ath79-add-USB-platform-setup-code-for-AR934X.patch @@ -0,0 +1,78 @@ +From 635d5a2ac8aa483c3a0635c60bff8ea8978ff6a7 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Sun, 11 Dec 2011 18:34:13 +0100 +Subject: [PATCH 39/47] MIPS: ath79: add USB platform setup code for AR934X + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + arch/mips/ath79/dev-usb.c | 28 ++++++++++++++++++++++++ + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 7 ++++++ + 2 files changed, 35 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -193,6 +193,32 @@ static void __init ar933x_usb_setup(void + platform_device_register(&ath79_ehci_device); + } + ++static void __init ar934x_usb_setup(void) ++{ ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); ++ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) ++ return; ++ ++ ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); ++ udelay(1000); ++ ++ ath79_device_reset_clear(AR934X_RESET_USB_PHY); ++ udelay(1000); ++ ++ ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG); ++ udelay(1000); ++ ++ ath79_device_reset_clear(AR934X_RESET_USB_HOST); ++ udelay(1000); ++ ++ ath79_usb_init_resource(ath79_ehci_resources, AR934X_EHCI_BASE, ++ AR934X_EHCI_SIZE, ATH79_CPU_IRQ_USB); ++ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; ++ platform_device_register(&ath79_ehci_device); ++} ++ + void __init ath79_register_usb(void) + { + if (soc_is_ar71xx()) +@@ -205,6 +231,8 @@ void __init ath79_register_usb(void) + ar913x_usb_setup(); + else if (soc_is_ar933x()) + ar933x_usb_setup(); ++ else if (soc_is_ar934x()) ++ ar934x_usb_setup(); + else + BUG(); + } +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -63,6 +63,8 @@ + + #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define AR934X_WMAC_SIZE 0x20000 ++#define AR934X_EHCI_BASE 0x1b000000 ++#define AR934X_EHCI_SIZE 0x1000 + + /* + * DDR_CTRL block +@@ -288,6 +290,11 @@ + #define AR933X_RESET_USB_PHY BIT(4) + #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) + ++#define AR934X_RESET_USB_PHY_ANALOG BIT(11) ++#define AR934X_RESET_USB_HOST BIT(5) ++#define AR934X_RESET_USB_PHY BIT(4) ++#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) ++ + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + + #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) diff --git a/target/linux/ar71xx/patches-3.3/135-MIPS-ath79-register-USB-host-controller-on-the-DB120.patch b/target/linux/ar71xx/patches-3.3/135-MIPS-ath79-register-USB-host-controller-on-the-DB120.patch new file mode 100644 index 0000000000..e82da3daac --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/135-MIPS-ath79-register-USB-host-controller-on-the-DB120.patch @@ -0,0 +1,28 @@ +From 932c1688e960bff170f1fc8072b3d3e958407a60 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos <juhosg@openwrt.org> +Date: Tue, 13 Mar 2012 13:51:09 +0100 +Subject: [PATCH 40/47] MIPS: ath79: register USB host controller on the DB120 board + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +--- + arch/mips/ath79/mach-db120.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -25,6 +25,7 @@ + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-spi.h" ++#include "dev-usb.h" + #include "dev-wmac.h" + #include "pci.h" + +@@ -126,6 +127,7 @@ static void __init db120_setup(void) + db120_gpio_keys); + ath79_register_spi(&db120_spi_data, db120_spi_info, + ARRAY_SIZE(db120_spi_info)); ++ ath79_register_usb(); + ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); + db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); + } diff --git a/target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch b/target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch deleted file mode 100644 index d84bf37b6e..0000000000 --- a/target/linux/ar71xx/patches-3.3/135-USB-ehci-ath79-add-device_id-entry-for-the-AR934X-So.patch +++ /dev/null @@ -1,41 +0,0 @@ -From cbf8930fe259777fb746f0387bf821729061c122 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Sun, 11 Dec 2011 22:09:20 +0100 -Subject: [PATCH 35/35] USB: ehci-ath79: add device_id entry for the AR934X SoCs - -Also make the USB_EHCI_ATH79 selectable for the AR934X SoCs. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> -Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> -Cc: Alan Stern <stern@rowland.harvard.edu> -Cc: Greg Kroah-Hartman <gregkh@suse.de> -Cc: linux-usb@vger.kernel.org ---- - drivers/usb/host/Kconfig | 2 +- - drivers/usb/host/ehci-ath79.c | 4 ++++ - 2 files changed, 5 insertions(+), 1 deletions(-) - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -219,7 +219,7 @@ config USB_CNS3XXX_EHCI - - config USB_EHCI_ATH79 - bool "EHCI support for AR7XXX/AR9XXX SoCs" -- depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) -+ depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X || SOC_AR934X) - select USB_EHCI_ROOT_HUB_TT - default y - ---help--- ---- a/drivers/usb/host/ehci-ath79.c -+++ b/drivers/usb/host/ehci-ath79.c -@@ -37,6 +37,10 @@ static const struct platform_device_id e - .driver_data = EHCI_ATH79_IP_V2, - }, - { -+ .name = "ar934x-ehci", -+ .driver_data = EHCI_ATH79_IP_V2, -+ }, -+ { - /* terminating entry */ - }, - }; diff --git a/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch b/target/linux/ar71xx/patches-3.3/200-spi-ath79-add-delay-between-SCK-changes.patch index 9294133d45..6b3b15b2df 100644 --- a/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-delay-between-SCK-changes.patch +++ b/target/linux/ar71xx/patches-3.3/200-spi-ath79-add-delay-between-SCK-changes.patch @@ -1,13 +1,13 @@ -From 8e948c035dd7983eccc3a889f2497e64044f3a31 Mon Sep 17 00:00:00 2001 +From 5e5ffd34e38fbbfa0a78833f35aa3c4d5d77e122 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> Date: Wed, 11 Jan 2012 20:06:35 +0100 -Subject: [PATCH 1/7] spi/ath79: add delay between SCK changes +Subject: [PATCH 41/47] spi/ath79: add delay between SCK changes The driver uses the "as fast as it can" approach to drive the SCK signal. However this does not work with certain low speed SPI chips (e.g. the PCF2123 RTC chip). Add per-bit slowdowns in order -to be able to use the driver with such chips as +to be able to use the driver with such chips as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> diff --git a/target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch b/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch index 08a76f5d27..4558a3dd6a 100644 --- a/target/linux/ar71xx/patches-3.3/202-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch +++ b/target/linux/ar71xx/patches-3.3/201-spi-ath79-add-missing-HIGH-LOW-SCK-transition.patch @@ -1,7 +1,7 @@ -From ea7e40aedae58b7a0f0ccd8658063de499734874 Mon Sep 17 00:00:00 2001 +From 52fa804e11c1722ec56de2e3888a9f8dfb96404b Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> Date: Wed, 11 Jan 2012 20:33:41 +0100 -Subject: [PATCH 2/7] spi/ath79: add missing HIGH->LOW SCK transition +Subject: [PATCH 42/47] spi/ath79: add missing HIGH->LOW SCK transition Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- diff --git a/target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch b/target/linux/ar71xx/patches-3.3/202-spi-ath79-remove-superfluous-chip-select-code.patch index 02d283ccec..8a12f5b9b9 100644 --- a/target/linux/ar71xx/patches-3.3/203-spi-ath79-remove-superfluous-chip-select-code.patch +++ b/target/linux/ar71xx/patches-3.3/202-spi-ath79-remove-superfluous-chip-select-code.patch @@ -1,7 +1,7 @@ -From ecf57a64feb737dec1da72aab21dccd30a88ba19 Mon Sep 17 00:00:00 2001 +From 3ba7fd81798169e8d40bc7e4800c6a0e691c40b7 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> Date: Mon, 9 Jan 2012 15:03:28 +0100 -Subject: [PATCH 3/7] spi/ath79: remove superfluous chip select code +Subject: [PATCH 43/47] spi/ath79: remove superfluous chip select code The spi_bitbang driver calls the chipselect function of the driver from spi_bitbang_setup in order to diff --git a/target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch b/target/linux/ar71xx/patches-3.3/203-spi-ath79-use-gpio_request_one.patch index 6bdb85579d..0c0ab63887 100644 --- a/target/linux/ar71xx/patches-3.3/204-spi-ath79-use-gpio_request_one.patch +++ b/target/linux/ar71xx/patches-3.3/203-spi-ath79-use-gpio_request_one.patch @@ -1,7 +1,7 @@ -From dd5b424b0b3f0370f9b63594ad53c16989b6ad78 Mon Sep 17 00:00:00 2001 +From 07f515fc0f69d18110cb2369e0b5d0fb4bdd7dfa Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> Date: Mon, 9 Jan 2012 15:04:21 +0100 -Subject: [PATCH 4/7] spi/ath79: use gpio_request_one +Subject: [PATCH 44/47] spi/ath79: use gpio_request_one Use gpio_request_one() instead of multiple gpiolib calls. diff --git a/target/linux/ar71xx/patches-3.3/205-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch b/target/linux/ar71xx/patches-3.3/204-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch index 6230e5d97b..e318d887ea 100644 --- a/target/linux/ar71xx/patches-3.3/205-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch +++ b/target/linux/ar71xx/patches-3.3/204-spi-ath79-avoid-multiple-initialization-of-the-SPI-c.patch @@ -1,7 +1,7 @@ -From 25e681989198e94656eab9df22b8b761abd2ae26 Mon Sep 17 00:00:00 2001 +From 47fdda225880ab0aaa8a75f61991a72fade591ab Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> Date: Mon, 9 Jan 2012 15:00:46 +0100 -Subject: [PATCH 5/7] spi/ath79: avoid multiple initialization of the SPI controller +Subject: [PATCH 45/47] spi/ath79: avoid multiple initialization of the SPI controller Currently we are initializing the SPI controller in the chip select line function, and that function is diff --git a/target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch b/target/linux/ar71xx/patches-3.3/205-spi-ath79-add-shutdown-handler.patch index 93edda312b..aeb8540dd2 100644 --- a/target/linux/ar71xx/patches-3.3/206-spi-ath79-add-shutdown-handler.patch +++ b/target/linux/ar71xx/patches-3.3/205-spi-ath79-add-shutdown-handler.patch @@ -1,7 +1,7 @@ -From e01dcc2835017b55e936bd150ddab29bfcf2c63c Mon Sep 17 00:00:00 2001 +From 8f30eb1354f54684d1d09599b2466f1a0e69d9c3 Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> Date: Wed, 11 Jan 2012 22:19:32 +0100 -Subject: [PATCH 6/7] spi/ath79: add shutdown handler +Subject: [PATCH 46/47] spi/ath79: add shutdown handler Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- diff --git a/target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch b/target/linux/ar71xx/patches-3.3/206-spi-ath79-make-chipselect-logic-more-flexible.patch index 08d544fc45..9cf14b0a7d 100644 --- a/target/linux/ar71xx/patches-3.3/207-spi-ath79-make-chipselect-logic-more-flexible.patch +++ b/target/linux/ar71xx/patches-3.3/206-spi-ath79-make-chipselect-logic-more-flexible.patch @@ -1,17 +1,18 @@ -From bdbd9b2861ba73557795915598bb276a8568d130 Mon Sep 17 00:00:00 2001 +From 16535fe56591ff85acd6776f53ff515799b037ba Mon Sep 17 00:00:00 2001 From: Gabor Juhos <juhosg@openwrt.org> Date: Wed, 11 Jan 2012 22:25:11 +0100 -Subject: [PATCH 7/7] spi/ath79: make chipselect logic more flexible +Subject: [PATCH 47/47] spi/ath79: make chipselect logic more flexible Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- arch/mips/ath79/mach-ap121.c | 6 ++ arch/mips/ath79/mach-ap81.c | 6 ++ + arch/mips/ath79/mach-db120.c | 6 ++ arch/mips/ath79/mach-pb44.c | 6 ++ arch/mips/ath79/mach-ubnt-xm.c | 6 ++ .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++- - drivers/spi/spi-ath79.c | 63 ++++++++++++-------- - 6 files changed, 69 insertions(+), 26 deletions(-) + drivers/spi/spi-ath79.c | 70 +++++++++++++------- + 7 files changed, 82 insertions(+), 26 deletions(-) --- a/arch/mips/ath79/mach-ap121.c +++ b/arch/mips/ath79/mach-ap121.c @@ -55,6 +56,27 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> } }; +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi + }, + }; + ++static struct ath79_spi_controller_data db120_spi0_data = { ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, ++}; ++ + static struct spi_board_info db120_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "s25sl064a", ++ .controller_data = &db120_spi0_data, + } + }; + --- a/arch/mips/ath79/mach-pb44.c +++ b/arch/mips/ath79/mach-pb44.c @@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio @@ -83,8 +105,8 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> }; +static struct ath79_spi_controller_data ubnt_xm_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, ++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, ++ .cs_line = 0, +}; + static struct spi_board_info ubnt_xm_spi_info[] = { @@ -200,14 +222,18 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> } return status; -@@ -145,9 +155,15 @@ static int ath79_spi_setup_cs(struct spi +@@ -145,9 +155,19 @@ static int ath79_spi_setup_cs(struct spi static void ath79_spi_cleanup_cs(struct spi_device *spi) { - if (spi->chip_select) { - struct ath79_spi_controller_data *cdata = spi->controller_data; - gpio_free(cdata->gpio); -+ struct ath79_spi_controller_data *cdata = spi->controller_data; ++ struct ath79_spi_controller_data *cdata; ++ ++ cdata = spi->controller_data; ++ if (!cdata) ++ return; + + switch (cdata->cs_type) { + case ATH79_SPI_CS_TYPE_INTERNAL: @@ -219,7 +245,17 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> } } -@@ -215,6 +231,10 @@ static __devinit int ath79_spi_probe(str +@@ -155,6 +175,9 @@ static int ath79_spi_setup(struct spi_de + { + int status = 0; + ++ if (spi->controller_data == NULL) ++ return -EINVAL; ++ + if (spi->bits_per_word > 32) + return -EINVAL; + +@@ -215,6 +238,10 @@ static __devinit int ath79_spi_probe(str unsigned long rate; int ret; @@ -230,7 +266,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> master = spi_alloc_master(&pdev->dev, sizeof(*sp)); if (master == NULL) { dev_err(&pdev->dev, "failed to allocate spi master\n"); -@@ -224,17 +244,10 @@ static __devinit int ath79_spi_probe(str +@@ -224,17 +251,10 @@ static __devinit int ath79_spi_probe(str sp = spi_master_get_devdata(master); platform_set_drvdata(pdev, sp); diff --git a/target/linux/ar71xx/patches-3.3/208-MIPS-ath79-db120-spi-chipselect-fix.patch b/target/linux/ar71xx/patches-3.3/208-MIPS-ath79-db120-spi-chipselect-fix.patch deleted file mode 100644 index 3b7705739e..0000000000 --- a/target/linux/ar71xx/patches-3.3/208-MIPS-ath79-db120-spi-chipselect-fix.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -95,12 +95,18 @@ static struct gpio_keys_button db120_gpi - }, - }; - -+static struct ath79_spi_controller_data db120_spi0_data = { -+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -+ .cs_line = 0, -+}; -+ - static struct spi_board_info db120_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "s25sl064a", -+ .controller_data = &db120_spi0_data, - } - }; - diff --git a/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch b/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch deleted file mode 100644 index ca0d3cc701..0000000000 --- a/target/linux/ar71xx/patches-3.3/210-MIPS-ath79-fix-gpio-count-for-ar7241.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -188,8 +188,10 @@ void __init ath79_gpio_init(void) - - if (soc_is_ar71xx()) - ath79_gpio_count = AR71XX_GPIO_COUNT; -- else if (soc_is_ar724x()) -- ath79_gpio_count = AR724X_GPIO_COUNT; -+ else if (soc_is_ar7240()) -+ ath79_gpio_count = AR7240_GPIO_COUNT; -+ else if (soc_is_ar7241() || soc_is_ar7242()) -+ ath79_gpio_count = AR7241_GPIO_COUNT; - else if (soc_is_ar913x()) - ath79_gpio_count = AR913X_GPIO_COUNT; - else if (soc_is_ar933x()) ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -428,7 +428,8 @@ - #define AR71XX_GPIO_REG_FUNC 0x28 - - #define AR71XX_GPIO_COUNT 16 --#define AR724X_GPIO_COUNT 18 -+#define AR7240_GPIO_COUNT 18 -+#define AR7241_GPIO_COUNT 20 - #define AR913X_GPIO_COUNT 22 - #define AR933X_GPIO_COUNT 30 - #define AR934X_GPIO_COUNT 23 diff --git a/target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch b/target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch deleted file mode 100644 index 9438844f29..0000000000 --- a/target/linux/ar71xx/patches-3.3/211-MIPS-ath79-fix-ar933x_wmac_reset.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -62,8 +62,8 @@ static void __init ar913x_wmac_setup(voi - - static int ar933x_wmac_reset(void) - { -- ath79_device_reset_clear(AR933X_RESET_WMAC); - ath79_device_reset_set(AR933X_RESET_WMAC); -+ ath79_device_reset_clear(AR933X_RESET_WMAC); - - return 0; - } diff --git a/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch b/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch deleted file mode 100644 index a3d0498899..0000000000 --- a/target/linux/ar71xx/patches-3.3/212-MIPS-ath79-fix-build-error-if-PCI-not-enabled.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/pci.h -+++ b/arch/mips/include/asm/mach-ath79/pci.h -@@ -16,13 +16,13 @@ - #if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX) - int ar71xx_pcibios_init(void); - #else --static inline int ar71xx_pcibios_init(void) { return 0 }; -+static inline int ar71xx_pcibios_init(void) { return 0; } - #endif - - #if defined(CONFIG_PCI_AR724X) - int ar724x_pcibios_init(int irq); - #else --static inline int ar724x_pcibios_init(int irq) { return 0 }; -+static inline int ar724x_pcibios_init(int irq) { return 0; } - #endif - - #endif /* __ASM_MACH_ATH79_PCI_H */ diff --git a/target/linux/ar71xx/patches-3.3/213-MIPS-ath79-fix-a-typo-in-ar71xx_regs.h b/target/linux/ar71xx/patches-3.3/213-MIPS-ath79-fix-a-typo-in-ar71xx_regs.h deleted file mode 100644 index 9069edd4d4..0000000000 --- a/target/linux/ar71xx/patches-3.3/213-MIPS-ath79-fix-a-typo-in-ar71xx_regs.h +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -313,7 +313,7 @@ - #define AR934X_RESET_USB_PHY_ANALOG BIT(11) - #define AR934X_RESET_HOST_DMA_INT BIT(10) - #define AR934X_RESET_GE0_MAC BIT(9) --#define AR934X_RESET_ETH_SIWTCH BIT(8) -+#define AR934X_RESET_ETH_SWITCH BIT(8) - #define AR934X_RESET_PCIE_PHY BIT(7) - #define AR934X_RESET_PCIE BIT(6) - #define AR934X_RESET_USB_HOST BIT(5) diff --git a/target/linux/ar71xx/patches-3.3/214-MIPS-ath79-fix-IRQ-number-for-AR7240-OHCI.patch b/target/linux/ar71xx/patches-3.3/214-MIPS-ath79-fix-IRQ-number-for-AR7240-OHCI.patch deleted file mode 100644 index 0be5aa89fa..0000000000 --- a/target/linux/ar71xx/patches-3.3/214-MIPS-ath79-fix-IRQ-number-for-AR7240-OHCI.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -126,6 +126,8 @@ static void __init ar7240_usb_setup(void - - ath79_ohci_resources[0].start = AR7240_OHCI_BASE; - ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; -+ ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; -+ ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; - platform_device_register(&ath79_ohci_device); - } - diff --git a/target/linux/ar71xx/patches-3.3/215-ar934x_fix_usb_reset.patch b/target/linux/ar71xx/patches-3.3/215-ar934x_fix_usb_reset.patch deleted file mode 100644 index e92353bdf2..0000000000 --- a/target/linux/ar71xx/patches-3.3/215-ar934x_fix_usb_reset.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -190,16 +190,16 @@ static void __init ar934x_usb_setup(void - if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) - return; - -- ath79_device_reset_clear(AR934X_RESET_USBSUS_OVERRIDE); -+ ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); - udelay(1000); - -- ath79_device_reset_set(AR934X_RESET_USB_PHY); -+ ath79_device_reset_clear(AR934X_RESET_USB_PHY); - udelay(1000); - -- ath79_device_reset_set(AR934X_RESET_USB_PHY_ANALOG); -+ ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG); - udelay(1000); - -- ath79_device_reset_set(AR934X_RESET_USB_HOST); -+ ath79_device_reset_clear(AR934X_RESET_USB_HOST); - udelay(1000); - - ath79_ehci_resources[0].start = AR934X_EHCI_BASE; diff --git a/target/linux/ar71xx/patches-3.3/463-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-3.3/463-spi-ath79-add-fast-flash-read.patch index 75db84ceb6..5268ad44c9 100644 --- a/target/linux/ar71xx/patches-3.3/463-spi-ath79-add-fast-flash-read.patch +++ b/target/linux/ar71xx/patches-3.3/463-spi-ath79-add-fast-flash-read.patch @@ -34,7 +34,7 @@ } static void ath79_spi_disable(struct ath79_spi *sp) -@@ -222,6 +229,110 @@ static u32 ath79_spi_txrx_mode0(struct s +@@ -229,6 +236,110 @@ static u32 ath79_spi_txrx_mode0(struct s return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); } @@ -145,7 +145,7 @@ static __devinit int ath79_spi_probe(struct platform_device *pdev) { struct spi_master *master; -@@ -244,6 +355,8 @@ static __devinit int ath79_spi_probe(str +@@ -251,6 +362,8 @@ static __devinit int ath79_spi_probe(str sp = spi_master_get_devdata(master); platform_set_drvdata(pdev, sp); @@ -154,7 +154,7 @@ master->setup = ath79_spi_setup; master->cleanup = ath79_spi_cleanup; master->bus_num = pdata->bus_num; -@@ -252,7 +365,7 @@ static __devinit int ath79_spi_probe(str +@@ -259,7 +372,7 @@ static __devinit int ath79_spi_probe(str sp->bitbang.master = spi_master_get(master); sp->bitbang.chipselect = ath79_spi_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; @@ -163,7 +163,7 @@ sp->bitbang.flags = SPI_CS_HIGH; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -@@ -277,7 +390,8 @@ static __devinit int ath79_spi_probe(str +@@ -284,7 +397,8 @@ static __devinit int ath79_spi_probe(str if (ret) goto err_clk_put; diff --git a/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch index 8ac50ea2a4..1ce8906333 100644 --- a/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch +++ b/target/linux/ar71xx/patches-3.3/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch @@ -59,7 +59,7 @@ --- a/arch/mips/ath79/mach-db120.c +++ b/arch/mips/ath79/mach-db120.c -@@ -153,7 +153,7 @@ static void __init db120_setup(void) +@@ -134,7 +134,7 @@ static void __init db120_setup(void) ath79_register_spi(&db120_spi_data, db120_spi_info, ARRAY_SIZE(db120_spi_info)); ath79_register_usb(); diff --git a/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch index 74b3c831f1..a5394add91 100644 --- a/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch +++ b/target/linux/ar71xx/patches-3.3/601-MIPS-ath79-add-more-register-defines.patch @@ -76,7 +76,7 @@ #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -285,7 +306,11 @@ +@@ -285,16 +306,50 @@ #define AR913X_RESET_USB_HOST BIT(5) #define AR913X_RESET_USB_PHY BIT(4) @@ -88,16 +88,46 @@ #define AR933X_RESET_USB_HOST BIT(5) #define AR933X_RESET_USB_PHY BIT(4) #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) -@@ -323,6 +348,8 @@ - #define AR934X_RESET_MBOX BIT(1) - #define AR934X_RESET_I2S BIT(0) + ++#define AR934X_RESET_HOST BIT(31) ++#define AR934X_RESET_SLIC BIT(30) ++#define AR934X_RESET_HDMA BIT(29) ++#define AR934X_RESET_EXTERNAL BIT(28) ++#define AR934X_RESET_RTC BIT(27) ++#define AR934X_RESET_PCIE_EP_INT BIT(26) ++#define AR934X_RESET_CHKSUM_ACC BIT(25) ++#define AR934X_RESET_FULL_CHIP BIT(24) ++#define AR934X_RESET_GE1_MDIO BIT(23) ++#define AR934X_RESET_GE0_MDIO BIT(22) ++#define AR934X_RESET_CPU_NMI BIT(21) ++#define AR934X_RESET_CPU_COLD BIT(20) ++#define AR934X_RESET_HOST_RESET_INT BIT(19) ++#define AR934X_RESET_PCIE_EP BIT(18) ++#define AR934X_RESET_UART1 BIT(17) ++#define AR934X_RESET_DDR BIT(16) ++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) ++#define AR934X_RESET_NANDF BIT(14) ++#define AR934X_RESET_GE1_MAC BIT(13) ++#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) + #define AR934X_RESET_USB_PHY_ANALOG BIT(11) ++#define AR934X_RESET_HOST_DMA_INT BIT(10) ++#define AR934X_RESET_GE0_MAC BIT(9) ++#define AR934X_RESET_ETH_SWITCH BIT(8) ++#define AR934X_RESET_PCIE_PHY BIT(7) ++#define AR934X_RESET_PCIE BIT(6) + #define AR934X_RESET_USB_HOST BIT(5) + #define AR934X_RESET_USB_PHY BIT(4) + #define AR934X_RESET_USBSUS_OVERRIDE BIT(3) ++#define AR934X_RESET_LUT BIT(2) ++#define AR934X_RESET_MBOX BIT(1) ++#define AR934X_RESET_I2S BIT(0) +#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) +#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -@@ -427,6 +454,14 @@ +@@ -399,10 +454,138 @@ #define AR71XX_GPIO_REG_INT_ENABLE 0x24 #define AR71XX_GPIO_REG_FUNC 0x28 @@ -110,9 +140,8 @@ +#define AR934X_GPIO_REG_FUNC 0x6c + #define AR71XX_GPIO_COUNT 16 - #define AR7240_GPIO_COUNT 18 - #define AR7241_GPIO_COUNT 20 -@@ -434,4 +469,124 @@ + #define AR724X_GPIO_COUNT 18 + #define AR913X_GPIO_COUNT 22 #define AR933X_GPIO_COUNT 30 #define AR934X_GPIO_COUNT 23 diff --git a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch index c0416ed6f0..01c3c9f1d5 100644 --- a/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch +++ b/target/linux/ar71xx/patches-3.3/605-MIPS-ath79-db120-fixes.patch @@ -7,9 +7,9 @@ - * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> * - * All rights reserved. - * -@@ -38,16 +38,25 @@ + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above +@@ -19,16 +19,25 @@ */ #include <linux/pci.h> @@ -37,7 +37,7 @@ #define DB120_GPIO_LED_WLAN_5G 12 #define DB120_GPIO_LED_WLAN_2G 13 #define DB120_GPIO_LED_STATUS 14 -@@ -58,8 +67,10 @@ +@@ -39,8 +48,10 @@ #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) @@ -50,7 +50,7 @@ static struct gpio_led db120_leds_gpio[] __initdata = { { -@@ -82,6 +93,11 @@ static struct gpio_led db120_leds_gpio[] +@@ -63,6 +74,11 @@ static struct gpio_led db120_leds_gpio[] .gpio = DB120_GPIO_LED_WLAN_2G, .active_low = 1, }, @@ -62,7 +62,7 @@ }; static struct gpio_keys_button db120_gpio_keys[] __initdata = { -@@ -95,66 +111,90 @@ static struct gpio_keys_button db120_gpi +@@ -76,66 +92,90 @@ static struct gpio_keys_button db120_gpi }, }; diff --git a/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch index cc393a8e76..c47f99c05e 100644 --- a/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch +++ b/target/linux/ar71xx/patches-3.3/607-MIPS-ath79-ubnt-xm-fixes.patch @@ -42,8 +42,8 @@ }; -static struct ath79_spi_controller_data ubnt_xm_spi0_data = { -- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, -- .cs_line = 0, +- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL, +- .cs_line = 0, -}; - -static struct spi_board_info ubnt_xm_spi_info[] = { |