diff options
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c | 81 |
1 files changed, 75 insertions, 6 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c index b1b18f9d47..197be7b581 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2008 Ubiquiti <support@ubnt.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -12,13 +13,19 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <linux/input.h> #include <asm/mips_machine.h> #include <asm/mach-ar71xx/ar71xx.h> #include <asm/mach-ar71xx/pci.h> #include <asm/mach-ar71xx/platform.h> -static struct spi_board_info routerstation_spi_info[] = { +#define UBNT_RS_GPIO_LED_RF 2 +#define UBNT_RS_GPIO_SW4 8 + +#define UBNT_BUTTONS_POLL_INTERVAL 20 + +static struct spi_board_info ubnt_rs_spi_info[] = { { .bus_num = 0, .chip_select = 0, @@ -27,11 +34,73 @@ static struct spi_board_info routerstation_spi_info[] = { } }; -static void __init routerstation_setup(void) +static struct ar71xx_pci_irq ubnt_rs_pci_irqs[] __initdata = { + { + .slot = 0, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV0, + }, { + .slot = 1, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV1, + }, { + .slot = 2, + .pin = 1, + .irq = AR71XX_PCI_IRQ_DEV2, + } +}; + +static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { + { + .name = "ubnt:green:rf", + .gpio = UBNT_RS_GPIO_LED_RF, + .active_low = 0, + } +}; + +static struct gpio_button ubnt_rs_gpio_buttons[] __initdata = { + { + .desc = "sw4", + .type = EV_KEY, + .code = BTN_0, + .threshold = 5, + .gpio = UBNT_RS_GPIO_SW4, + .active_low = 1, + } +}; + +#define UBNT_RS_WAN_PHYMASK (1 << 20) +#define UBNT_RS_LAN_PHYMASK ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19)) + +static void __init ubnt_rs_setup(void) { - ar71xx_add_device_spi(NULL, routerstation_spi_info, - ARRAY_SIZE(routerstation_spi_info)); + ar71xx_add_device_spi(NULL, ubnt_rs_spi_info, + ARRAY_SIZE(ubnt_rs_spi_info)); + + ar71xx_add_device_mdio(~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.phy_mask = UBNT_RS_LAN_PHYMASK; + + ar71xx_eth1_data.speed = SPEED_100; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + + ar71xx_pci_init(ARRAY_SIZE(ubnt_rs_pci_irqs), ubnt_rs_pci_irqs); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), + ubnt_rs_leds_gpio); + + ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_rs_gpio_buttons), + ubnt_rs_gpio_buttons); } -MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "Ubiquiti RouterStation", - routerstation_setup); +MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "Ubiquiti RouterStation", ubnt_rs_setup); |