diff options
| -rw-r--r-- | package/network/utils/comgt/Makefile | 15 | ||||
| -rw-r--r-- | package/network/utils/comgt/files/3g.usb | 2 | ||||
| -rw-r--r-- | package/network/utils/comgt/files/ncm.json | 49 | ||||
| -rw-r--r-- | package/network/utils/comgt/files/ncm.sh | 156 | ||||
| -rw-r--r-- | package/network/utils/comgt/files/runcommand.gcom | 26 |
5 files changed, 247 insertions, 1 deletions
diff --git a/package/network/utils/comgt/Makefile b/package/network/utils/comgt/Makefile index 11a1a49139..5fccd947e6 100644 --- a/package/network/utils/comgt/Makefile +++ b/package/network/utils/comgt/Makefile @@ -40,6 +40,12 @@ $(call Package/comgt/Default) DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-sierrawireless +kmod-usb-net +kmod-usb-net-sierrawireless endef +define Package/comgt-ncm +$(call Package/comgt/Default) + TITLE+=NCM 3G/4G Support + DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-option +kmod-usb-net +kmod-usb-net-cdc-ncm +kmod-usb-net-huawei-cdc-ncm +endef + define Package/comgt/description comgt is a scripting language interpreter useful for establishing communications on serial lines and through PCMCIA modems as well as GPRS @@ -86,5 +92,14 @@ define Package/comgt-directip/install $(INSTALL_BIN) ./files/directip.sh $(1)/lib/netifd/proto/directip.sh endef +define Package/comgt-ncm/install + $(INSTALL_DIR) $(1)/etc/gcom + $(INSTALL_DATA) ./files/ncm.json $(1)/etc/gcom/ncm.json + $(INSTALL_DATA) ./files/runcommand.gcom $(1)/etc/gcom/runcommand.gcom + $(INSTALL_DIR) $(1)/lib/netifd/proto + $(INSTALL_BIN) ./files/ncm.sh $(1)/lib/netifd/proto/ncm.sh +endef + $(eval $(call BuildPackage,comgt)) $(eval $(call BuildPackage,comgt-directip)) +$(eval $(call BuildPackage,comgt-ncm)) diff --git a/package/network/utils/comgt/files/3g.usb b/package/network/utils/comgt/files/3g.usb index fd6837e650..ac8326b710 100644 --- a/package/network/utils/comgt/files/3g.usb +++ b/package/network/utils/comgt/files/3g.usb @@ -8,7 +8,7 @@ find_3g_iface() { local proto config_get proto "$cfg" proto - [ "$proto" = 3g ] || return 0 + [ "$proto" = 3g ] || [ "$proto" = ncm ] || return 0 # bypass state vars here because 00-netstate could clobber .device local dev=$(uci_get network "$cfg" device) diff --git a/package/network/utils/comgt/files/ncm.json b/package/network/utils/comgt/files/ncm.json new file mode 100644 index 0000000000..b9b15cdba0 --- /dev/null +++ b/package/network/utils/comgt/files/ncm.json @@ -0,0 +1,49 @@ +{ + "huawei": { + "initialize": [ + "AT", + "ATZ", + "ATQ0", + "ATV1", + "ATE1", + "ATS0=0" + ], + "modes": { + "preferlte": "AT^SYSCFGEX=\\\"030201\\\",3fffffff,2,4,7fffffffffffffff,,", + "preferumts": "AT^SYSCFGEX=\\\"0201\\\",3fffffff,2,4,7fffffffffffffff,,", + "lte": "AT^SYSCFGEX=\\\"03\\\",3fffffff,2,4,7fffffffffffffff,,", + "umts": "AT^SYSCFGEX=\\\"02\\\",3fffffff,2,4,7fffffffffffffff,,", + "gsm": "AT^SYSCFGEX=\\\"01\\\",3fffffff,2,4,7fffffffffffffff,,", + "auto": "AT^SYSCFGEX=\\\"00\\\",3fffffff,2,4,7fffffffffffffff,," + }, + "connect": "AT^NDISDUP=1,1,\\\"${apn}\\\"${username:+,\\\"$username\\\"}${password:+,\\\"$password\\\"}${auth:+,$auth}", + "disconnect": "AT^NDISDUP=1,0" + }, + "SAMSUNG": { + "initialize": [ + "AT", + "AT+CGREG=2", + "AT+CFUN=5", + "AT+MODESELECT=3", + "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\"" + ], + "modes": { + "umts": "AT+CHANGEALLPATH=1" + }, + "connect": "AT+CGATT=1", + "disconnect": "AT+CGATT=0" + }, + "Sony": { + "initialize": [ + "AT+CFUN=1", + "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\"", + "AT*EIAAUW=1,1,\\\"${username}\\\",\\\"${password}\\\",${auth:-00111}" + ], + "modes": { + "umts": "AT+CFUN=6", + "gsm": "AT+CFUN=5" + }, + "connect": "AT*ENAP=1,1", + "disconnect": "AT*ENAP=0" + } +} diff --git a/package/network/utils/comgt/files/ncm.sh b/package/network/utils/comgt/files/ncm.sh new file mode 100644 index 0000000000..14e421fcad --- /dev/null +++ b/package/network/utils/comgt/files/ncm.sh @@ -0,0 +1,156 @@ +#!/bin/sh + +. /lib/functions.sh +. ../netifd-proto.sh +init_proto "$@" + +proto_ncm_init_config() { + no_device=1 + available=1 + proto_config_add_string "device:device" + proto_config_add_string apn + proto_config_add_string auth + proto_config_add_string username + proto_config_add_string password + proto_config_add_string pincode + proto_config_add_string delay + proto_config_add_string mode +} + +proto_ncm_setup() { + local interface="$1" + + local manufacturer initialize setmode connect + + local device apn auth username password pincode delay mode + json_get_vars device apn auth username password pincode delay mode + + [ -n "$device" ] || { + echo "ncm[$$]" "No control device specified" + proto_notify_error "$interface" NO_DEVICE + proto_set_available "$interface" 0 + return 1 + } + [ -e "$device" ] || { + echo "ncm[$$]" "Control device not valid" + proto_set_available "$interface" 0 + return 1 + } + [ -n "$apn" ] || { + echo "ncm[$$]" "No APN specified" + proto_notify_error "$interface" NO_APN + proto_set_available "$interface" 0 + return 1 + } + + [ -n "$delay" ] && sleep "$delay" + + manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'` + [ $? -ne 0 ] && { + echo "ncm[$$]" "Failed to get modem information" + proto_notify_error "$interface" GETINFO_FAILED + proto_set_available "$interface" 0 + return 1 + } + + json_load "$(cat /etc/gcom/ncm.json)" + json_select "$manufacturer" + [ $? -ne 0 ] && { + echo "ncm[$$]" "Unsupported modem" + proto_notify_error "$interface" UNSUPPORTED_MODEM + proto_set_available "$interface" 0 + return 1 + } + json_get_values initialize initialize + for i in $initialize; do + eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || { + echo "ncm[$$]" "Failed to initialize modem" + proto_notify_error "$interface" INITIALIZE_FAILED + proto_set_available "$interface" 0 + return 1 + } + done + + [ -n "$pincode" ] && { + PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || { + echo "ncm[$$]" "Unable to verify PIN" + proto_notify_error "$interface" PIN_FAILED + proto_block_restart "$interface" + return 1 + } + } + [ -n "$mode" ] && { + json_select modes + json_get_var setmode "$mode" + COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || { + echo "ncm[$$]" "Failed to set operating mode" + proto_notify_error "$interface" SETMODE_FAILED + proto_set_available "$interface" 0 + return 1 + } + json_select .. + } + + json_get_var connect connect + eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || { + echo "ncm[$$]" "Failed to connect" + proto_notify_error "$interface" CONNECT_FAILED + proto_set_available "$interface" 0 + return 1 + } + + echo "ncm[$$]" "Connected, starting DHCP" + proto_init_update "*" 1 + proto_send_update "$interface" + + json_init + json_add_string name "${interface}_dhcp" + json_add_string ifname "@$interface" + json_add_string proto "dhcp" + json_close_object + ubus call network add_dynamic "$(json_dump)" + + json_init + json_add_string name "${interface}_dhcpv6" + json_add_string ifname "@$interface" + json_add_string proto "dhcpv6" + json_close_object + ubus call network add_dynamic "$(json_dump)" +} + +proto_ncm_teardown() { + local interface="$1" + + proto_init_update "*" 0 + proto_send_update "$interface" + + local manufacturer disconnect + + local device + json_get_vars device + + echo "ncm[$$]" "Stopping network" + + manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'` + [ $? -ne 0 ] && { + echo "ncm[$$]" "Failed to get modem information" + proto_notify_error "$interface" GETINFO_FAILED + return 1 + } + + json_load "$(cat /etc/gcom/ncm.json)" + json_select "$manufacturer" || { + echo "ncm[$$]" "Unsupported modem" + proto_notify_error "$interface" UNSUPPORTED_MODEM + return 1 + } + + json_get_var disconnect disconnect + COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || { + echo "ncm[$$]" "Failed to disconnect" + proto_notify_error "$interface" DISCONNECT_FAILED + return 1 + } +} + +add_protocol ncm diff --git a/package/network/utils/comgt/files/runcommand.gcom b/package/network/utils/comgt/files/runcommand.gcom new file mode 100644 index 0000000000..6ba061ff98 --- /dev/null +++ b/package/network/utils/comgt/files/runcommand.gcom @@ -0,0 +1,26 @@ +# run AT-command from environment +opengt + set com 115200n81 + set senddelay 0.02 + waitquiet 1 0.2 + flash 0.1 + +:start + send "sending -> " + send $env("COMMAND") + send "^n" + + waitfor 15 "OK","ERR","ERROR" + if % = 0 goto continue + if % = 1 goto error + if % = 2 goto error + + print "Timeout running AT-command\n" + exit 1 + +:error + print "Error running AT-command\n" + exit 1 + +:continue + exit 0 |