diff options
7 files changed, 0 insertions, 1031 deletions
diff --git a/target/linux/x86/patches-3.18/006-yenta_mistery.patch b/target/linux/x86/patches-3.18/006-yenta_mistery.patch deleted file mode 100644 index 72144cb07d..0000000000 --- a/target/linux/x86/patches-3.18/006-yenta_mistery.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/pcmcia/yenta_socket.c -+++ b/drivers/pcmcia/yenta_socket.c -@@ -1233,6 +1233,17 @@ static int yenta_probe(struct pci_dev *d - - /* We must finish initialization here */ - -+#ifdef CONFIG_X86_RDC321X -+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */ -+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060 -+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */ -+ -+ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK); -+ config_writel(socket, 35*4, 0x00000022); -+ config_writel(socket, 36*4, 0x60200000); -+ config_writel(socket, 40*4, 0x7e020000); -+#endif -+ - if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) { - /* No IRQ or request_irq failed. Poll */ - socket->cb_irq = 0; /* But zero is a valid IRQ number. */ diff --git a/target/linux/x86/patches-3.18/009-rdc321x_select_embedded.patch b/target/linux/x86/patches-3.18/009-rdc321x_select_embedded.patch deleted file mode 100644 index e1599e4f54..0000000000 --- a/target/linux/x86/patches-3.18/009-rdc321x_select_embedded.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/x86/Kconfig -+++ b/arch/x86/Kconfig -@@ -531,6 +531,8 @@ config X86_RDC321X - depends on X86_EXTENDED_PLATFORM - select M486 - select X86_REBOOTFIXUPS -+ select EMBEDDED -+ select ARCH_REQUIRE_GPIOLIB - ---help--- - This option is needed for RDC R-321x system-on-chip, also known - as R-8610-(G). diff --git a/target/linux/x86/patches-3.18/010-rdc_cpu_ident.patch b/target/linux/x86/patches-3.18/010-rdc_cpu_ident.patch deleted file mode 100644 index 64d38c1b7a..0000000000 --- a/target/linux/x86/patches-3.18/010-rdc_cpu_ident.patch +++ /dev/null @@ -1,176 +0,0 @@ ---- /dev/null -+++ b/Documentation/x86/rdc.txt -@@ -0,0 +1,69 @@ -+ -+Introduction -+============ -+ -+RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC -+(system-on-chips) for a number of years. They are not the fastest of -+CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility -+coupled with very low power consumption[1] and low cost make them ideal -+for embedded applications. -+ -+ -+Where to find -+============= -+ -+RDC chips show up in numerous embedded devices, but be careful since -+many of them will not run Linux 2.6 without significant expertise. -+ -+There are several variants of what the linux kernel refers to generically -+as RDC321X: R8610, R321x, S3282 and AMRISC20000. -+ -+R321x: Found in various routers, see the OpenWrt project for details, -+ http://wiki.openwrt.org/oldwiki/rdcport -+ -+R8610: Found on the RDC evaluation board -+ http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/ -+ -+AMRISC20000: Found in the MGB-100 wireless hard disk -+ http://tintuc.no-ip.com/linux/tipps/mgb100/ -+ -+S3282: Found in various NAS devices, including the Bifferboard -+ http://www.bifferos.com -+ -+ -+Kernel Configuration -+==================== -+ -+Add support for this CPU with CONFIG_X86_RDC321X. Ensure that maths -+emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE -+(CONFIG_X86_MCE not selected). -+ -+ -+CPU detection -+============= -+ -+None of these chips support the cpuid instruction, so as with some -+other x86 compatible SoCs, we must check the north bridge and look -+for specific 'signature' PCI device config. -+ -+The current detection code has been tested only on the Bifferboard -+(S3282 CPU), please send bug reports or success stories with -+other devices to bifferos@yahoo.co.uk. -+ -+ -+Credits -+======= -+ -+Many thanks to RDC for providing the customer codes to allow -+detection of all known variants, without which this detection code -+would have been very hard to ascertain. -+ -+ -+References -+========== -+ -+[1] S3282 in certain NAS solutions consumes less than 1W -+ -+ -+mark@bifferos.com 2009 -+ ---- a/arch/x86/Kconfig -+++ b/arch/x86/Kconfig -@@ -529,6 +529,7 @@ config X86_RDC321X - bool "RDC R-321x SoC" - depends on X86_32 - depends on X86_EXTENDED_PLATFORM -+ select PCI - select M486 - select X86_REBOOTFIXUPS - select EMBEDDED ---- a/arch/x86/include/asm/processor.h -+++ b/arch/x86/include/asm/processor.h -@@ -136,7 +136,8 @@ struct cpuinfo_x86 { - #define X86_VENDOR_CENTAUR 5 - #define X86_VENDOR_TRANSMETA 7 - #define X86_VENDOR_NSC 8 --#define X86_VENDOR_NUM 9 -+#define X86_VENDOR_RDC 9 -+#define X86_VENDOR_NUM 10 - - #define X86_VENDOR_UNKNOWN 0xff - ---- a/arch/x86/kernel/cpu/Makefile -+++ b/arch/x86/kernel/cpu/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix - obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o - obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o - obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o -+obj-$(CONFIG_X86_RDC321X) += rdc.o - - obj-$(CONFIG_PERF_EVENTS) += perf_event.o - ---- /dev/null -+++ b/arch/x86/kernel/cpu/rdc.c -@@ -0,0 +1,69 @@ -+/* -+ * See Documentation/x86/rdc.txt -+ * -+ * mark@bifferos.com -+ */ -+ -+#include <linux/pci.h> -+#include <asm/pci-direct.h> -+#include "cpu.h" -+ -+ -+static void __cpuinit rdc_identify(struct cpuinfo_x86 *c) -+{ -+ u16 vendor, device; -+ u32 customer_id; -+ -+ if (!early_pci_allowed()) -+ return; -+ -+ /* RDC CPU is SoC (system-on-chip), Northbridge is always present */ -+ vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID); -+ device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID); -+ -+ if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020) -+ return; /* not RDC */ -+ /* -+ * NB: We could go on and check other devices, e.g. r6040 NIC, but -+ * that's probably overkill -+ */ -+ -+ customer_id = read_pci_config(0, 0, 0, 0x90); -+ -+ switch (customer_id) { -+ /* id names are from RDC */ -+ case 0x00321000: -+ strcpy(c->x86_model_id, "R3210/R3211"); -+ break; -+ case 0x00321001: -+ strcpy(c->x86_model_id, "AMITRISC20000/20010"); -+ break; -+ case 0x00321002: -+ strcpy(c->x86_model_id, "R3210X/Edimax"); -+ break; -+ case 0x00321003: -+ strcpy(c->x86_model_id, "R3210/Kcodes"); -+ break; -+ case 0x00321004: /* tested */ -+ strcpy(c->x86_model_id, "S3282/CodeTek"); -+ break; -+ case 0x00321007: -+ strcpy(c->x86_model_id, "R8610"); -+ break; -+ default: -+ pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id); -+ break; -+ } -+ -+ strcpy(c->x86_vendor_id, "RDC"); -+ c->x86_vendor = X86_VENDOR_RDC; -+} -+ -+static const struct cpu_dev __cpuinitconst rdc_cpu_dev = { -+ .c_vendor = "RDC", -+ .c_ident = { "RDC" }, -+ .c_identify = rdc_identify, -+ .c_x86_vendor = X86_VENDOR_RDC, -+}; -+ -+cpu_dev_register(rdc_cpu_dev); diff --git a/target/linux/x86/patches-3.18/012-export_erase_write.patch b/target/linux/x86/patches-3.18/012-export_erase_write.patch deleted file mode 100644 index a98525ee50..0000000000 --- a/target/linux/x86/patches-3.18/012-export_erase_write.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/mtd/mtdblock.c -+++ b/drivers/mtd/mtdblock.c -@@ -63,7 +63,7 @@ static void erase_callback(struct erase_ - wake_up(wait_q); - } - --static int erase_write (struct mtd_info *mtd, unsigned long pos, -+int erase_write (struct mtd_info *mtd, unsigned long pos, - int len, const char *buf) - { - struct erase_info erase; ---- a/include/linux/mtd/mtd.h -+++ b/include/linux/mtd/mtd.h -@@ -416,6 +416,9 @@ extern void register_mtd_user (struct mt - extern int unregister_mtd_user (struct mtd_notifier *old); - void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size); - -+int erase_write (struct mtd_info *mtd, unsigned long pos, -+ int len, const char *buf); -+ - void mtd_erase_callback(struct erase_info *instr); - - static inline int mtd_is_bitflip(int err) { diff --git a/target/linux/x86/patches-3.18/100-rdc_boards.patch b/target/linux/x86/patches-3.18/100-rdc_boards.patch deleted file mode 100644 index 1f3b161acf..0000000000 --- a/target/linux/x86/patches-3.18/100-rdc_boards.patch +++ /dev/null @@ -1,745 +0,0 @@ ---- a/arch/x86/Makefile -+++ b/arch/x86/Makefile -@@ -196,6 +196,9 @@ libs-y += arch/x86/lib/ - # See arch/x86/Kbuild for content of core part of the kernel - core-y += arch/x86/ - -+# RDC R-321X support -+core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/ -+ - # drivers-y are linked after core-y - drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ - drivers-$(CONFIG_PCI) += arch/x86/pci/ ---- /dev/null -+++ b/arch/x86/mach-rdc321x/Makefile -@@ -0,0 +1,5 @@ -+# -+# Makefile for the RDC321x specific parts of the kernel -+# -+obj-$(CONFIG_X86_RDC321X) := platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o -+ ---- /dev/null -+++ b/arch/x86/mach-rdc321x/platform.c -@@ -0,0 +1,115 @@ -+/* -+ * Generic RDC321x platform devices -+ * -+ * Copyright (C) 2007-2009 OpenWrt.org -+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ * Boston, MA 02110-1301, USA. -+ * -+ */ -+ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/mtd/map.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/physmap.h> -+#include <linux/root_dev.h> -+ -+#include <asm/rdc_boards.h> -+ -+static struct rdc_platform_data rdcplat_data; -+ -+/* LEDS */ -+static struct platform_device rdc321x_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = &rdcplat_data.led_data, -+ } -+}; -+ -+/* Button */ -+static struct platform_device rdc321x_buttons = { -+ .name = "gpio-keys-polled", -+ .id = -1, -+ .dev = { -+ .platform_data = &rdcplat_data.button_data, -+ } -+}; -+ -+static __initdata struct platform_device *rdc321x_devs[] = { -+ &rdc321x_leds, -+ &rdc321x_buttons, -+}; -+ -+const char *__initdata boards[] = { -+ "Sitecom", -+ "AR525W", -+ "Bifferboard", -+ "R8610", -+ 0 -+}; -+ -+static struct map_info rdc_map_info = { -+ .name = "rdc_flash", -+ .size = 0x800000, /* 8MB */ -+ .phys = 0xFF800000, /* (u32) -rdc_map_info.size */ -+ .bankwidth = 2, -+}; -+ -+static int __init rdc_board_setup(void) -+{ -+ struct mtd_info *mtdinfo; -+ struct mtd_part_parser_data *ppdata; -+ int res; -+ -+ simple_map_init(&rdc_map_info); -+ -+ while (1) { -+ rdc_map_info.virt = ioremap(rdc_map_info.phys, -+ rdc_map_info.size); -+ if (rdc_map_info.virt == NULL) -+ continue; -+ -+ mtdinfo = do_map_probe("cfi_probe", &rdc_map_info); -+ if (mtdinfo == NULL) -+ mtdinfo = do_map_probe("jedec_probe", &rdc_map_info); -+ if (mtdinfo != NULL) -+ break; -+ -+ iounmap(rdc_map_info.virt); -+ if ((rdc_map_info.size >>= 1) < 0x100000) /* 1MB */ -+ panic("RDC321x: Could not find start of flash!"); -+ rdc_map_info.phys = (u32) -rdc_map_info.size; -+ } -+ -+ /* -+ * TODO: add a new field to mtd_part_parser_data, and use that -+ * instead of this ugly casting -+ */ -+ ppdata = (struct mtd_part_parser_data *) &rdcplat_data; -+ res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0); -+ if (res) { -+ panic("RDC321x: can't identify board type"); -+ return -ENOSYS; -+ } -+ -+ ROOT_DEV = 0; -+ -+ return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs)); -+} -+late_initcall(rdc_board_setup); ---- /dev/null -+++ b/arch/x86/mach-rdc321x/boards/ar525w.c -@@ -0,0 +1,251 @@ -+/* -+ * ar525w RDC321x platform devices -+ * -+ * Copyright (C) 2007-2009 OpenWrt.org -+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ * Boston, MA 02110-1301, USA. -+ * -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+#include <linux/vmalloc.h> -+#include <linux/mtd/mtd.h> -+#include <linux/slab.h> -+ -+#include <asm/rdc_boards.h> -+ -+struct image_header { -+ char magic[4]; /* ASICII: GMTK */ -+ u32 checksum; /* CRC32 */ -+ u32 version; /* x.x.x.x */ -+ u32 kernelsz; /* The size of the kernel image */ -+ u32 imagesz; /* The length of this image file ( kernel + romfs + this header) */ -+ u32 pid; /* Product ID */ -+ u32 fastcksum; /* Partial CRC32 on (First(256), medium(256), last(512)) */ -+ u32 reserved; -+}; -+ -+static struct gpio_led ar525w_leds[] = { -+ { .name = "rdc321x:dmz", .gpio = 1, .active_low = 1}, -+}; -+static struct gpio_keys_button ar525w_btns[] = { -+ { -+ .gpio = 6, -+ .code = BTN_0, -+ .desc = "Reset", -+ .active_low = 1, -+ } -+}; -+ -+static u32 __initdata crctab[257] = { -+ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, -+ 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3, -+ 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, -+ 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, -+ 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, -+ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, -+ 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, -+ 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5, -+ 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, -+ 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, -+ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, -+ 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, -+ 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, -+ 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f, -+ 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, -+ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, -+ 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, -+ 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, -+ 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, -+ 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01, -+ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, -+ 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, -+ 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, -+ 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, -+ 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, -+ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, -+ 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, -+ 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, -+ 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, -+ 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, -+ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, -+ 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, -+ 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, -+ 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, -+ 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, -+ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, -+ 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, -+ 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7, -+ 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, -+ 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, -+ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, -+ 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, -+ 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, -+ 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79, -+ 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, -+ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, -+ 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, -+ 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, -+ 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, -+ 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713, -+ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, -+ 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, -+ 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, -+ 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, -+ 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, -+ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, -+ 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, -+ 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, -+ 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, -+ 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, -+ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, -+ 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf, -+ 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, -+ 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d, -+ 0 -+}; -+ -+static u32 __init crc32(u8 * buf, u32 len) -+{ -+ register int i; -+ u32 sum; -+ register u32 s0; -+ s0 = ~0; -+ for (i = 0; i < len; i++) { -+ s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]]; -+ } -+ sum = ~s0; -+ return sum; -+} -+ -+static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header) -+{ -+ char *buffer; -+ int res; -+ u32 bufferlength = header->kernelsz + sizeof(struct image_header); -+ u32 len; -+ static char crcbuf[0x400]; -+ -+ printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n", -+ header->imagesz, bufferlength); -+ -+ buffer = vmalloc(bufferlength); -+ if (!buffer) { -+ printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength); -+ return -ENOMEM; -+ } -+ -+ res = mtd_read(master, 0x0, bufferlength, &len, buffer); -+ if (res || len != bufferlength) -+ goto out; -+ -+ header = (struct image_header *) buffer; -+ header->imagesz = bufferlength; -+ header->checksum = 0; -+ header->fastcksum = 0; -+ -+ memcpy(crcbuf, buffer, 0x100); -+ memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100); -+ memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200); -+ -+ header->fastcksum = crc32(crcbuf, sizeof(crcbuf)); -+ header->checksum = crc32(buffer, bufferlength); -+ -+ res = mtd_unlock(master, 0, master->erasesize); -+ if (res != 0 && res != -EOPNOTSUPP) { -+ printk(KERN_ERR "Can't unlock image header\n"); -+ goto out; -+ } -+ -+ res = erase_write (master, 0, master->erasesize, buffer); -+ if (res) -+ printk(KERN_ERR "Can't rewrite image header\n"); -+ -+out: -+ vfree(buffer); -+ return res; -+} -+ -+static int __init -+parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts, -+ struct mtd_part_parser_data *plat_data) -+{ -+ struct image_header header; -+ int res; -+ size_t len; -+ struct mtd_partition *rdc_flash_parts; -+ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data; -+ -+ if (master->size != 0x400000) //4MB -+ return -ENOSYS; -+ -+ res = mtd_read(master, 0x0, sizeof(header), &len, (char *)&header); -+ if (res) -+ return res; -+ -+ if (strncmp(header.magic, "GMTK", 4)) -+ return -ENOSYS; -+ -+ if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) { -+ printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz); -+ return -EINVAL; -+ } -+ -+ if (header.kernelsz + sizeof(header) != header.imagesz) { -+ res = fixup_ar525w_header(master, &header); -+ if (res) -+ return res; -+ } -+ -+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL); -+ -+ rdc_flash_parts[0].name = "firmware"; -+ rdc_flash_parts[0].offset = 0x0; -+ rdc_flash_parts[0].size = 0x3E0000; -+ rdc_flash_parts[1].name = "rootfs"; -+ rdc_flash_parts[1].offset = header.kernelsz + sizeof(header); -+ rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset; -+ rdc_flash_parts[2].name = "bootloader"; -+ rdc_flash_parts[2].offset = 0x3E0000; -+ rdc_flash_parts[2].size = 0x20000; -+ -+ *pparts = rdc_flash_parts; -+ -+ pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds); -+ pdata->led_data.leds = ar525w_leds; -+ pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns); -+ pdata->button_data.buttons = ar525w_btns; -+ -+ return 3; -+} -+ -+static struct mtd_part_parser __initdata ar525w_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = parse_ar525w_partitions, -+ .name = "AR525W", -+}; -+ -+static int __init ar525w_setup(void) -+{ -+ return register_mtd_parser(&ar525w_parser); -+} -+ -+arch_initcall(ar525w_setup); ---- /dev/null -+++ b/arch/x86/mach-rdc321x/boards/bifferboard.c -@@ -0,0 +1,74 @@ -+/* -+ * Bifferboard RDC321x platform devices -+ * -+ * Copyright (C) 2010 bifferos@yahoo.co.uk -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ * Boston, MA 02110-1301, USA. -+ * -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+#include <linux/slab.h> -+ -+#include <asm/rdc_boards.h> -+ -+static int __init -+parse_bifferboard_partitions(struct mtd_info *master, -+ struct mtd_partition **pparts, -+ struct mtd_part_parser_data *plat_data) -+{ -+ int res; -+ size_t len; -+ struct mtd_partition *rdc_flash_parts; -+ u32 kernel_len; -+ u16 tmp; -+ -+ res = mtd_read(master, 0x4000 + 1036, 2, &len, (char *) &tmp); -+ if (res) -+ return res; -+ kernel_len = tmp * master->erasesize; -+ -+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL); -+ -+ *pparts = rdc_flash_parts; -+ -+ rdc_flash_parts[0].name = "kernel"; -+ rdc_flash_parts[0].offset = 0; -+ rdc_flash_parts[0].size = kernel_len; -+ rdc_flash_parts[1].name = "rootfs"; -+ rdc_flash_parts[1].offset = kernel_len; -+ rdc_flash_parts[1].size = master->size - kernel_len - 0x10000; -+ rdc_flash_parts[2].name = "biffboot"; -+ rdc_flash_parts[2].offset = master->size - 0x10000; -+ rdc_flash_parts[2].size = 0x10000; -+ -+ return 3; -+} -+ -+struct mtd_part_parser __initdata bifferboard_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = parse_bifferboard_partitions, -+ .name = "Bifferboard", -+}; -+ -+static int __init bifferboard_setup(void) -+{ -+ return register_mtd_parser(&bifferboard_parser); -+} -+arch_initcall(bifferboard_setup); ---- /dev/null -+++ b/arch/x86/mach-rdc321x/boards/r8610.c -@@ -0,0 +1,69 @@ -+/* -+ * R8610 RDC321x platform devices -+ * -+ * Copyright (C) 2009, Florian Fainelli <florian@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ * Boston, MA 02110-1301, USA. -+ * -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+#include <linux/slab.h> -+ -+#include <asm/rdc_boards.h> -+ -+static int __init -+parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts, -+ struct mtd_part_parser_data *plat_data) -+{ -+ struct mtd_partition *rdc_flash_parts; -+ -+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL); -+ -+ *pparts = rdc_flash_parts; -+ -+ rdc_flash_parts[0].name = "kernel"; -+ rdc_flash_parts[0].size = 0x001f0000; -+ rdc_flash_parts[0].offset = 0; -+ rdc_flash_parts[1].name = "config"; -+ rdc_flash_parts[1].size = 0x10000; -+ rdc_flash_parts[1].offset = MTDPART_OFS_APPEND; -+ rdc_flash_parts[2].name = "rootfs"; -+ rdc_flash_parts[2].size = 0x1E0000; -+ rdc_flash_parts[2].offset = MTDPART_OFS_APPEND; -+ rdc_flash_parts[3].name = "redboot"; -+ rdc_flash_parts[3].size = 0x20000; -+ rdc_flash_parts[3].offset = MTDPART_OFS_APPEND; -+ rdc_flash_parts[3].mask_flags = MTD_WRITEABLE; -+ -+ return 4; -+} -+ -+struct mtd_part_parser __initdata r8610_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = parse_r8610_partitions, -+ .name = "R8610", -+}; -+ -+static int __init r8610_setup(void) -+{ -+ return register_mtd_parser(&r8610_parser); -+} -+ -+arch_initcall(r8610_setup); ---- /dev/null -+++ b/arch/x86/mach-rdc321x/boards/sitecom.c -@@ -0,0 +1,115 @@ -+/* -+ * Sitecom RDC321x platform devices -+ * -+ * Copyright (C) 2007-2009 OpenWrt.org -+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ * Boston, MA 02110-1301, USA. -+ * -+ */ -+ -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/mtd/physmap.h> -+#include <linux/input.h> -+#include <linux/slab.h> -+ -+#include <asm/rdc_boards.h> -+ -+struct image_header { -+ char magic[4]; -+ u32 kernel_length; -+ u32 ramdisk_length; -+ char magic2[4]; -+ u32 kernel_length2; -+}; -+ -+static struct gpio_led sitecom_leds[] = { -+ { .name = "rdc321x:power", .gpio = 15, .active_low = 1}, -+ { .name = "rdc321x:usb0", .gpio = 0, .active_low = 1}, -+ { .name = "rdc321x:usb1", .gpio = 1, .active_low = 1}, -+}; -+ -+static struct gpio_keys_button sitecom_btns[] = { -+ { -+ .gpio = 6, -+ .code = BTN_0, -+ .desc = "Reset", -+ .active_low = 1, -+ } -+}; -+ -+static int __init -+parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts, -+ struct mtd_part_parser_data *plat_data) -+{ -+ struct image_header header; -+ int res; -+ size_t len; -+ struct mtd_partition *rdc_flash_parts; -+ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data; -+ -+ if (master->size != 0x400000) /* 4MB */ -+ return -ENOSYS; -+ -+ res = mtd_read(master, 0x8000, sizeof(header), &len, (char *)&header); -+ if (res) -+ return res; -+ -+ if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4)) -+ return -ENOSYS; -+ -+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL); -+ -+ rdc_flash_parts[0].name = "firmware"; -+ rdc_flash_parts[0].offset = 0x8000; -+ rdc_flash_parts[0].size = 0x3F0000 - 0x8000; -+ rdc_flash_parts[1].name = "config"; -+ rdc_flash_parts[1].offset = 0; -+ rdc_flash_parts[1].size = 0x8000; -+ rdc_flash_parts[2].name = "kernel"; -+ rdc_flash_parts[2].offset = 0x8014; -+ rdc_flash_parts[2].size = header.kernel_length; -+ rdc_flash_parts[3].name = "rootfs"; -+ rdc_flash_parts[3].offset = 0x8014 + header.kernel_length; -+ rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset; -+ rdc_flash_parts[4].name = "bootloader"; -+ rdc_flash_parts[4].offset = 0x3F0000; -+ rdc_flash_parts[4].size = 0x10000; -+ -+ *pparts = rdc_flash_parts; -+ -+ pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds); -+ pdata->led_data.leds = sitecom_leds; -+ pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns); -+ pdata->button_data.buttons = sitecom_btns; -+ -+ return 5; -+} -+ -+struct mtd_part_parser __initdata sitecom_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = parse_sitecom_partitions, -+ .name = "Sitecom", -+}; -+ -+static int __init sitecom_setup(void) -+{ -+ return register_mtd_parser(&sitecom_parser); -+} -+ -+arch_initcall(sitecom_setup); ---- /dev/null -+++ b/arch/x86/mach-rdc321x/reboot.c -@@ -0,0 +1,44 @@ -+/* -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ * Boston, MA 02110-1301, USA. -+ * -+ */ -+ -+#include <asm/reboot.h> -+#include <asm/io.h> -+ -+static void rdc321x_reset(void) -+{ -+ unsigned i; -+ -+ /* write to southbridge config register 0x41 -+ enable pci reset on cpu reset, make internal port 0x92 writeable -+ and switch port 0x92 to internal */ -+ outl(0x80003840, 0xCF8); -+ i = inl(0xCFC); -+ i |= 0x1600; -+ outl(i, 0xCFC); -+ -+ /* soft reset */ -+ outb(1, 0x92); -+} -+ -+static int __init rdc_setup_reset(void) -+{ -+ machine_ops.emergency_restart = rdc321x_reset; -+ return 0; -+} -+ -+arch_initcall(rdc_setup_reset); ---- /dev/null -+++ b/arch/x86/include/asm/rdc_boards.h -@@ -0,0 +1,36 @@ -+/* -+ * RDC321x boards -+ * -+ * Copyright (C) 2007-2009 OpenWrt.org -+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> -+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the -+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -+ * Boston, MA 02110-1301, USA. -+ * -+ */ -+ -+#ifndef _RDC_BOARDS_H__ -+#define _RDC_BOARDS_H__ -+ -+#include <linux/leds.h> -+#include <linux/gpio_keys.h> -+ -+struct rdc_platform_data { -+ struct gpio_led_platform_data led_data; -+ struct gpio_keys_platform_data button_data; -+}; -+ -+#endif diff --git a/target/linux/x86/patches-3.18/150-pit-tick-rate.patch b/target/linux/x86/patches-3.18/150-pit-tick-rate.patch deleted file mode 100644 index ea2da0cedb..0000000000 --- a/target/linux/x86/patches-3.18/150-pit-tick-rate.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/include/linux/timex.h -+++ b/include/linux/timex.h -@@ -158,6 +158,10 @@ int read_current_timer(unsigned long *ti - void ntp_notify_cmos_timer(void); - - /* The clock frequency of the i8253/i8254 PIT */ -+#ifdef CONFIG_X86_RDC321X -+#define PIT_TICK_RATE 1041816ul -+#else - #define PIT_TICK_RATE 1193182ul -+#endif - - #endif /* LINUX_TIMEX_H */ diff --git a/target/linux/x86/patches-3.18/160-kexec-fix.patch b/target/linux/x86/patches-3.18/160-kexec-fix.patch deleted file mode 100644 index ea32494a09..0000000000 --- a/target/linux/x86/patches-3.18/160-kexec-fix.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001 -From: root <root@cent.localnet> -Date: Sun, 6 Dec 2009 18:26:43 +0000 -Subject: [PATCH 03/14] kexec fix - ---- - arch/x86/kernel/relocate_kernel_32.S | 6 ++++++ - 1 files changed, 6 insertions(+), 0 deletions(-) - ---- a/arch/x86/kernel/relocate_kernel_32.S -+++ b/arch/x86/kernel/relocate_kernel_32.S -@@ -54,8 +54,10 @@ relocate_kernel: - movl %eax, CR0(%edi) - movl %cr3, %eax - movl %eax, CR3(%edi) -+#ifndef CONFIG_X86_RDC321X - movl %cr4, %eax - movl %eax, CR4(%edi) -+#endif - - /* read the arguments and say goodbye to the stack */ - movl 20+4(%esp), %ebx /* page_list */ -@@ -124,7 +126,9 @@ identity_mapped: - * Setting everything to zero seems safe. - */ - xorl %eax, %eax -+#ifndef CONFIG_X86_RDC321X - movl %eax, %cr4 -+#endif - - jmp 1f - 1: -@@ -195,8 +199,10 @@ identity_mapped: - ret - - virtual_mapped: -+#ifndef CONFIG_X86_RDC321X - movl CR4(%edi), %eax - movl %eax, %cr4 -+#endif - movl CR3(%edi), %eax - movl %eax, %cr3 - movl CR0(%edi), %eax |