aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch39
-rw-r--r--target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch29
-rw-r--r--target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch52
-rw-r--r--target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch38
-rw-r--r--target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch138
-rw-r--r--target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch87
-rw-r--r--target/linux/bcm53xx/patches-3.18/190-bcma_hcd_add_bcm5301x_support.patch100
-rw-r--r--target/linux/bcm53xx/patches-3.18/191-bcma_hcd_add_gpio_power_control.patch62
8 files changed, 383 insertions, 162 deletions
diff --git a/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch b/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch
new file mode 100644
index 0000000000..56e962d793
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch
@@ -0,0 +1,39 @@
+From baf3d128e5bdf9d322539609133a15b493b0c2ef Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 11 Jun 2015 22:57:35 +0200
+Subject: [PATCH] USB: bcma: remove chip id check
+
+I have never seen any bcma device with an USB host core which was not a
+SoC, the bcma devices have an USB device core with a different core id.
+Some SoC have IDs with 47XX and 53XX in decimal form which would be
+rejected by this check. Instead of fixing this check just remove it.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 5 -----
+ 1 file changed, 5 deletions(-)
+
+diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
+index cd6d0af..080587e 100644
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -214,16 +214,11 @@ err_alloc:
+ static int bcma_hcd_probe(struct bcma_device *dev)
+ {
+ int err;
+- u16 chipid_top;
+ u32 ohci_addr;
+ struct bcma_hcd_device *usb_dev;
+ struct bcma_chipinfo *chipinfo;
+
+ chipinfo = &dev->bus->chipinfo;
+- /* USBcores are only connected on embedded devices. */
+- chipid_top = (chipinfo->id & 0xFF00);
+- if (chipid_top != 0x4700 && chipid_top != 0x5300)
+- return -ENODEV;
+
+ /* TODO: Probably need checks here; is the core connected? */
+
+--
+1.8.4.5
+
diff --git a/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch b/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch
new file mode 100644
index 0000000000..1e18fcfca2
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch
@@ -0,0 +1,29 @@
+From f5bc834917a8b1b9487749bdfe8eda52a01967b4 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 11 Jun 2015 22:57:36 +0200
+Subject: [PATCH] USB: bcma: replace numbers with constants
+
+The constants for these numbers were added long time ago, use them.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
+index 080587e..853bf9d 100644
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -233,7 +233,8 @@ static int bcma_hcd_probe(struct bcma_device *dev)
+
+ /* In AI chips EHCI is addrspace 0, OHCI is 1 */
+ ohci_addr = dev->addr_s[0];
+- if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
++ if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 ||
++ chipinfo->id == BCMA_CHIP_ID_BCM4749)
+ && chipinfo->rev == 0)
+ ohci_addr = 0x18009000;
+
+--
+1.8.4.5
+
diff --git a/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch b/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch
new file mode 100644
index 0000000000..32a17653de
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch
@@ -0,0 +1,52 @@
+From 93724affb195149df6f7630901d878f6e273fa02 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 11 Jun 2015 22:57:37 +0200
+Subject: [PATCH] USB: bcma: use devm_kzalloc
+
+Instead of manually handling the frees use devm. There was also a free
+missing in the unregister call which is not needed with devm.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 11 ++++-------
+ 1 file changed, 4 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
+index 853bf9d..d7ea50d 100644
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -225,7 +225,8 @@ static int bcma_hcd_probe(struct bcma_device *dev)
+ if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
+
+- usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
++ usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
++ GFP_KERNEL);
+ if (!usb_dev)
+ return -ENOMEM;
+
+@@ -239,10 +240,8 @@ static int bcma_hcd_probe(struct bcma_device *dev)
+ ohci_addr = 0x18009000;
+
+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
+- if (IS_ERR(usb_dev->ohci_dev)) {
+- err = PTR_ERR(usb_dev->ohci_dev);
+- goto err_free_usb_dev;
+- }
++ if (IS_ERR(usb_dev->ohci_dev))
++ return PTR_ERR(usb_dev->ohci_dev);
+
+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
+ if (IS_ERR(usb_dev->ehci_dev)) {
+@@ -255,8 +254,6 @@ static int bcma_hcd_probe(struct bcma_device *dev)
+
+ err_unregister_ohci_dev:
+ platform_device_unregister(usb_dev->ohci_dev);
+-err_free_usb_dev:
+- kfree(usb_dev);
+ return err;
+ }
+
+--
+1.8.4.5
+
diff --git a/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch b/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch
new file mode 100644
index 0000000000..799c93ef41
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch
@@ -0,0 +1,38 @@
+From 232996d1ba3002e7e80b18075e2838fc86f21412 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 11 Jun 2015 22:57:38 +0200
+Subject: [PATCH] USB: bcma: fix error handling in bcma_hcd_create_pdev()
+
+This patch makes bcma_hcd_create_pdev() not return NULL, but a prober
+error code in case of an error.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
+index d7ea50d..8a38313 100644
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -169,7 +169,7 @@ static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, boo
+ {
+ struct platform_device *hci_dev;
+ struct resource hci_res[2];
+- int ret = -ENOMEM;
++ int ret;
+
+ memset(hci_res, 0, sizeof(hci_res));
+
+@@ -183,7 +183,7 @@ static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, boo
+ hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+ "ehci-platform" , 0);
+ if (!hci_dev)
+- return NULL;
++ return ERR_PTR(-ENOMEM);
+
+ hci_dev->dev.parent = &dev->dev;
+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+--
+1.8.4.5
+
diff --git a/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch b/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch
new file mode 100644
index 0000000000..d7980fa4fa
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch
@@ -0,0 +1,138 @@
+From b65851f41c22b8c69b8fe9ca7782d19ed2155efc Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 11 Jun 2015 22:57:39 +0200
+Subject: [PATCH] USB: bcma: add bcm53xx support
+
+The Broadcom ARM SoCs with this usb core need a different
+initialization and they have a different core id. This patch adds
+support for these USB 2.0 core.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 81 +++++++++++++++++++++++++++++++++++++++++++--
+ 1 file changed, 78 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
+index 8a38313..983bc67 100644
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -2,7 +2,8 @@
+ * Broadcom specific Advanced Microcontroller Bus
+ * Broadcom USB-core driver (BCMA bus glue)
+ *
+- * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+@@ -88,7 +89,7 @@ static void bcma_hcd_4716wa(struct bcma_device *dev)
+ }
+
+ /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+-static void bcma_hcd_init_chip(struct bcma_device *dev)
++static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
+ {
+ u32 tmp;
+
+@@ -159,6 +160,70 @@ static void bcma_hcd_init_chip(struct bcma_device *dev)
+ }
+ }
+
++static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
++{
++ struct bcma_device *arm_core;
++ void __iomem *dmu;
++
++ arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
++ if (!arm_core) {
++ dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n");
++ return;
++ }
++
++ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
++ if (!dmu) {
++ dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n");
++ return;
++ }
++
++ /* Unlock DMU PLL settings */
++ iowrite32(0x0000ea68, dmu + 0x180);
++
++ /* Write USB 2.0 PLL control setting */
++ iowrite32(0x00dd10c3, dmu + 0x164);
++
++ /* Lock DMU PLL settings */
++ iowrite32(0x00000000, dmu + 0x180);
++
++ iounmap(dmu);
++}
++
++static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
++{
++ u32 val;
++
++ /*
++ * Delay after PHY initialized to ensure HC is ready to be configured
++ */
++ usleep_range(1000, 2000);
++
++ /* Set packet buffer OUT threshold */
++ val = bcma_read32(dev, 0x94);
++ val &= 0xffff;
++ val |= 0x80 << 16;
++ bcma_write32(dev, 0x94, val);
++
++ /* Enable break memory transfer */
++ val = bcma_read32(dev, 0x9c);
++ val |= 1;
++ bcma_write32(dev, 0x9c, val);
++}
++
++static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
++{
++ bcma_core_enable(dev, 0);
++
++ if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
++ dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
++ if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 ||
++ dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
++ bcma_hcd_init_chip_arm_phy(dev);
++
++ bcma_hcd_init_chip_arm_hc(dev);
++ }
++}
++
+ static const struct usb_ehci_pdata ehci_pdata = {
+ };
+
+@@ -230,7 +295,16 @@ static int bcma_hcd_probe(struct bcma_device *dev)
+ if (!usb_dev)
+ return -ENOMEM;
+
+- bcma_hcd_init_chip(dev);
++ switch (dev->id.id) {
++ case BCMA_CORE_NS_USB20:
++ bcma_hcd_init_chip_arm(dev);
++ break;
++ case BCMA_CORE_USB20_HOST:
++ bcma_hcd_init_chip_mips(dev);
++ break;
++ default:
++ return -ENODEV;
++ }
+
+ /* In AI chips EHCI is addrspace 0, OHCI is 1 */
+ ohci_addr = dev->addr_s[0];
+@@ -299,6 +373,7 @@ static int bcma_hcd_resume(struct bcma_device *dev)
+
+ static const struct bcma_device_id bcma_hcd_table[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORETABLE_END
+ };
+ MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
+--
+1.8.4.5
+
diff --git a/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch b/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch
new file mode 100644
index 0000000000..8a00141b8f
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch
@@ -0,0 +1,87 @@
+From f3cf44a313b3687efd55ba091558e20a4d218c31 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 11 Jun 2015 22:57:40 +0200
+Subject: [PATCH] USB: bcma: add support for controlling bus power through GPIO
+
+On some boards a GPIO is needed to activate USB controller. Make it
+possible to specify such a GPIO in device tree.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 24 ++++++++++++++++++++++++
+ 1 file changed, 24 insertions(+)
+
+diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
+index 983bc67..a01c6ce 100644
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -24,6 +24,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
+ #include <linux/usb/ehci_pdriver.h>
+ #include <linux/usb/ohci_pdriver.h>
+
+@@ -224,6 +226,23 @@ static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
+ }
+ }
+
++static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
++{
++ int gpio;
++
++ gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
++ if (!gpio_is_valid(gpio))
++ return;
++
++ if (val) {
++ gpio_request(gpio, "bcma-hcd-gpio");
++ gpio_set_value(gpio, 1);
++ } else {
++ gpio_set_value(gpio, 0);
++ gpio_free(gpio);
++ }
++}
++
+ static const struct usb_ehci_pdata ehci_pdata = {
+ };
+
+@@ -295,6 +314,8 @@ static int bcma_hcd_probe(struct bcma_device *dev)
+ if (!usb_dev)
+ return -ENOMEM;
+
++ bcma_hci_platform_power_gpio(dev, true);
++
+ switch (dev->id.id) {
+ case BCMA_CORE_NS_USB20:
+ bcma_hcd_init_chip_arm(dev);
+@@ -347,6 +368,7 @@ static void bcma_hcd_remove(struct bcma_device *dev)
+
+ static void bcma_hcd_shutdown(struct bcma_device *dev)
+ {
++ bcma_hci_platform_power_gpio(dev, false);
+ bcma_core_disable(dev, 0);
+ }
+
+@@ -354,6 +376,7 @@ static void bcma_hcd_shutdown(struct bcma_device *dev)
+
+ static int bcma_hcd_suspend(struct bcma_device *dev)
+ {
++ bcma_hci_platform_power_gpio(dev, false);
+ bcma_core_disable(dev, 0);
+
+ return 0;
+@@ -361,6 +384,7 @@ static int bcma_hcd_suspend(struct bcma_device *dev)
+
+ static int bcma_hcd_resume(struct bcma_device *dev)
+ {
++ bcma_hci_platform_power_gpio(dev, true);
+ bcma_core_enable(dev, 0);
+
+ return 0;
+--
+1.8.4.5
+
diff --git a/target/linux/bcm53xx/patches-3.18/190-bcma_hcd_add_bcm5301x_support.patch b/target/linux/bcm53xx/patches-3.18/190-bcma_hcd_add_bcm5301x_support.patch
deleted file mode 100644
index bffb7ae052..0000000000
--- a/target/linux/bcm53xx/patches-3.18/190-bcma_hcd_add_bcm5301x_support.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-Subject: [PATCH] bcma-hcd: add BCM5301x platform support
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -88,7 +88,7 @@ static void bcma_hcd_4716wa(struct bcma_
- }
-
- /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
--static void bcma_hcd_init_chip(struct bcma_device *dev)
-+static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
- {
- u32 tmp;
-
-@@ -159,6 +159,52 @@ static void bcma_hcd_init_chip(struct bc
- }
- }
-
-+static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
-+{
-+ struct bcma_device *arm_core;
-+ void __iomem *dmu;
-+ u32 val;
-+
-+ bcma_core_disable(dev, 0);
-+ bcma_core_enable(dev, 0);
-+
-+ msleep(1);
-+
-+ /* Set packet buffer OUT threshold */
-+ val = bcma_read32(dev, 0x94);
-+ val &= 0xffff;
-+ val |= 0x80 << 16;
-+ bcma_write32(dev, 0x94, val);
-+
-+ /* Enable break memory transfer */
-+ val = bcma_read32(dev, 0x9c);
-+ val |= 1;
-+ bcma_write32(dev, 0x9c, val);
-+
-+ if (dev->bus->chipinfo.pkg != BCMA_PKG_ID_BCM4707 &&
-+ dev->bus->chipinfo.pkg != BCMA_PKG_ID_BCM4708)
-+ return;
-+
-+ arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
-+ if (!arm_core)
-+ return;
-+
-+ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
-+ if (!dmu)
-+ return;
-+
-+ /* Unlock DMU PLL settings */
-+ iowrite32(0x0000ea68, dmu + 0x180);
-+
-+ /* Write USB 2.0 PLL control setting */
-+ iowrite32(0x00dd10c3, dmu + 0x164);
-+
-+ /* Lock DMU PLL settings */
-+ iowrite32(0x00000000, dmu + 0x180);
-+
-+ iounmap(dmu);
-+}
-+
- static const struct usb_ehci_pdata ehci_pdata = {
- };
-
-@@ -222,7 +268,8 @@ static int bcma_hcd_probe(struct bcma_de
- chipinfo = &dev->bus->chipinfo;
- /* USBcores are only connected on embedded devices. */
- chipid_top = (chipinfo->id & 0xFF00);
-- if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+ if (chipid_top != 0x4700 && chipid_top != 0x5300 &&
-+ chipinfo->id != BCMA_CHIP_ID_BCM4707)
- return -ENODEV;
-
- /* TODO: Probably need checks here; is the core connected? */
-@@ -234,7 +281,12 @@ static int bcma_hcd_probe(struct bcma_de
- if (!usb_dev)
- return -ENOMEM;
-
-- bcma_hcd_init_chip(dev);
-+ if (IS_BUILTIN(CONFIG_ARCH_BCM_5301X) &&
-+ chipinfo->id == BCMA_CHIP_ID_BCM4707) {
-+ bcma_hcd_init_chip_arm(dev);
-+ } else if(IS_BUILTIN(CONFIG_BCM47XX)) {
-+ bcma_hcd_init_chip_mips(dev);
-+ }
-
- /* In AI chips EHCI is addrspace 0, OHCI is 1 */
- ohci_addr = dev->addr_s[0];
-@@ -306,6 +358,7 @@ static int bcma_hcd_resume(struct bcma_d
-
- static const struct bcma_device_id bcma_hcd_table[] = {
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
- BCMA_CORETABLE_END
- };
- MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
diff --git a/target/linux/bcm53xx/patches-3.18/191-bcma_hcd_add_gpio_power_control.patch b/target/linux/bcm53xx/patches-3.18/191-bcma_hcd_add_gpio_power_control.patch
deleted file mode 100644
index 9c45556ec9..0000000000
--- a/target/linux/bcm53xx/patches-3.18/191-bcma_hcd_add_gpio_power_control.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-Subject: [PATCH] bcma-hcd: add support for controlling bus power through GPIO
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -23,6 +23,8 @@
- #include <linux/platform_device.h>
- #include <linux/module.h>
- #include <linux/slab.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
-
-@@ -205,7 +207,38 @@ static void bcma_hcd_init_chip_arm(struc
- iounmap(dmu);
- }
-
-+static void bcma_hci_platform_power_gpio(struct platform_device *dev, bool val)
-+{
-+ int gpio;
-+
-+ gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
-+ if (!gpio_is_valid(gpio))
-+ return;
-+
-+ if (val) {
-+ gpio_request(gpio, "bcma-hcd-gpio");
-+ gpio_set_value(gpio, 1);
-+ } else {
-+ gpio_set_value(gpio, 0);
-+ gpio_free(gpio);
-+ }
-+}
-+
-+static int bcma_hci_platform_power_on(struct platform_device *dev)
-+{
-+ bcma_hci_platform_power_gpio(dev, true);
-+ return 0;
-+}
-+
-+static void bcma_hci_platform_power_off(struct platform_device *dev)
-+{
-+ bcma_hci_platform_power_gpio(dev, false);
-+}
-+
- static const struct usb_ehci_pdata ehci_pdata = {
-+ .power_on = bcma_hci_platform_power_on,
-+ .power_suspend = bcma_hci_platform_power_off,
-+ .power_off = bcma_hci_platform_power_off,
- };
-
- static const struct usb_ohci_pdata ohci_pdata = {
-@@ -233,6 +266,7 @@ static struct platform_device *bcma_hcd_
-
- hci_dev->dev.parent = &dev->dev;
- hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
-+ hci_dev->dev.of_node = dev->dev.of_node;
-
- ret = platform_device_add_resources(hci_dev, hci_res,
- ARRAY_SIZE(hci_res));