diff options
| -rw-r--r-- | target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/uci-defaults/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rw-r--r-- | target/linux/ramips/dts/WHR-1166D.dts | 138 | ||||
| -rw-r--r-- | target/linux/ramips/image/Makefile | 3 |
5 files changed, 148 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 904afd1a41..3ed0fbb670 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -110,6 +110,7 @@ case "$FIRMWARE" in whr-g300n | \ whr-300hp2 | \ whr-600d | \ + whr-1166d | \ wl-330n | \ wl-330n3g | \ wl-351 | \ @@ -141,7 +142,7 @@ case "$FIRMWARE" in cy-swr1100) rt2x00_eeprom_extract "factory" 8192 512 ;; - rt-n56u | whr-600d) + rt-n56u | whr-600d | whr-1166d) rt2x00_eeprom_extract "factory" 32768 512 ;; esac diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index c5e380cbc6..c2f768b8a3 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -176,7 +176,8 @@ case $board in set_wifi_led "asus:blue:wifi" ;; whr-300hp2 |\ - whr-600d) + whr-600d |\ + whr-1166d) ucidef_set_led_default "power" "power" "buffalo:green:power" "1" ucidef_set_led_default "router" "router" "buffalo:green:router" "1" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 5d897fc521..697599341b 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -241,6 +241,9 @@ ramips_board_detect() { *"WHR-600D") name="whr-600d" ;; + *"WHR-1166D") + name="whr-1166d" + ;; *"WHR-G300N") name="whr-g300n" ;; diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts new file mode 100644 index 0000000000..47e0b1b6ed --- /dev/null +++ b/target/linux/ramips/dts/WHR-1166D.dts @@ -0,0 +1,138 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-soc"; + model = "Buffalo WHR-1166D"; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25q64"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l6405d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xeb0000>; + }; + + partition@e00000 { + label = "usercfg"; + reg = <0xe00000 0x100000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + + ralink,port-map = "llllw"; + }; + + gsw@10110000 { + ralink,port4 = "ephy"; + }; + + pcie@10140000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "buffalo:red:power"; + gpios = <&gpio0 7 1>; + }; + status { + label = "buffalo:green:status"; + gpios = <&gpio0 8 1>; + }; + power2 { + label = "buffalo:green:power"; + gpios = <&gpio0 9 1>; + }; + status2 { + label = "buffalo:orange:status"; + gpios = <&gpio0 10 1>; + }; + internet { + label = "buffalo:green:internet"; + gpios = <&gpio2 17 1>; + }; + router { + label = "buffalo:green:router"; + gpios = <&gpio2 18 1>; + }; + router2 { + label = "buffalo:orange:router"; + gpios = <&gpio2 19 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + s1 { + label = "reset"; + gpios = <&gpio2 12 1>; + linux,code = <0x100>; + }; + s2 { + label = "aoss"; + gpios = <&gpio2 13 1>; + linux,code = <0x101>; + }; + s3 { + label = "ap"; + gpios = <&gpio2 14 1>; + linux,code = <0x102>; + }; + s4 { + label = "bridge"; + gpios = <&gpio2 15 1>; + linux,code = <0x103>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 1b342deb7a..ec3ef75de3 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -705,6 +705,8 @@ Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N5 whr_300hp2_mtd_size=7012352 Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size)) Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size)) +whr_1166d_mtd_size=15400960 +Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size)) dlink810l_mtd_size=6881280 Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size)) na930_mtd_size=20971520 @@ -720,6 +722,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/DIR-810L,$(1)) $(call Image/Build/Profile/WHR300HP2,$(1)) $(call Image/Build/Profile/WHR600D,$(1)) + $(call Image/Build/Profile/WHR1166D,$(1)) $(call Image/Build/Profile/NA930,$(1)) endef endif |