aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ipq806x/config-4.98
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi1142
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts293
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts208
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts271
-rw-r--r--target/linux/ipq806x/patches-4.9/0022-dts-ipq4019-support-ARMv7-PMU.patch2
-rw-r--r--target/linux/ipq806x/patches-4.9/0024-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch87
-rw-r--r--target/linux/ipq806x/patches-4.9/0025-qcom-ipq4019-enable-USB-bus-for-DK01.1-board.patch45
-rw-r--r--target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch96
-rw-r--r--target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch6
-rw-r--r--target/linux/ipq806x/patches-4.9/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch56
-rw-r--r--target/linux/ipq806x/patches-4.9/105-mtd-nor-add-mx25l25635f.patch22
-rw-r--r--target/linux/ipq806x/patches-4.9/130-pinctrl-ipq4019-add-pinctrl.patch51
-rw-r--r--target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch (renamed from target/linux/ipq806x/patches-4.9/0021-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch)47
-rw-r--r--target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch130
-rw-r--r--target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch35
-rw-r--r--target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch105
-rw-r--r--target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch29
-rw-r--r--target/linux/ipq806x/patches-4.9/310-msm-adhoc-bus-support.patch11026
-rw-r--r--target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch29
-rw-r--r--target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch53
-rw-r--r--target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch2690
-rw-r--r--target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch52
-rw-r--r--target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch46
-rw-r--r--target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch4602
-rw-r--r--target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch92
-rw-r--r--target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch (renamed from target/linux/ipq806x/patches-4.9/0023-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch)151
-rw-r--r--target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch25
-rw-r--r--target/linux/ipq806x/patches-4.9/850-soc-add-qualcomm-syscon.patch177
29 files changed, 21249 insertions, 327 deletions
diff --git a/target/linux/ipq806x/config-4.9 b/target/linux/ipq806x/config-4.9
index b66717d6c1..3897284b4f 100644
--- a/target/linux/ipq806x/config-4.9
+++ b/target/linux/ipq806x/config-4.9
@@ -2,6 +2,7 @@ CONFIG_ALIGNMENT_TRAP=y
# CONFIG_AMBA_PL08X is not set
CONFIG_APQ_GCC_8084=y
CONFIG_APQ_MMCC_8084=y
+CONFIG_AR40XX_PHY=y
CONFIG_AR8216_PHY=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -10,6 +11,7 @@ CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_IPQ40XX=y
# CONFIG_ARCH_MDM9615 is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MSM8960=y
@@ -66,6 +68,7 @@ CONFIG_BLK_MQ_PCI=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_BOUNCE=y
+CONFIG_BUS_TOPOLOGY_ADHOC=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_OF=y
@@ -143,6 +146,7 @@ CONFIG_DYNAMIC_DEBUG=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
+CONFIG_ESSEDMA=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
@@ -253,6 +257,7 @@ CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MDIO_GPIO=y
+CONFIG_MDIO_IPQ40XX=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
# CONFIG_MFD_MAX77620 is not set
@@ -272,6 +277,7 @@ CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MSM_BUS_SCALING=y
CONFIG_MSM_GCC_8660=y
# CONFIG_MSM_GCC_8916 is not set
CONFIG_MSM_GCC_8960=y
@@ -291,6 +297,7 @@ CONFIG_MTD_NAND_QCOM=y
CONFIG_MTD_QCOM_SMEM_PARTS=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
@@ -389,6 +396,7 @@ CONFIG_QCOM_SCM_32=y
CONFIG_QCOM_SMEM=y
# CONFIG_QCOM_SMP2P is not set
# CONFIG_QCOM_SMSM is not set
+CONFIG_QCOM_TCSR=y
CONFIG_QCOM_TSENS=y
# CONFIG_QCOM_WCNSS_PIL is not set
CONFIG_QCOM_WDT=y
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi
new file mode 100644
index 0000000000..169505973f
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi
@@ -0,0 +1,1142 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <dt-bindings/msm/msm-bus-ids.h>
+
+/ {
+
+soc {
+ ad_hoc_bus: ad-hoc-bus {
+ compatible = "qcom,msm-bus-device";
+ reg = <0x580000 0x14000>,
+ <0x500000 0x11000>;
+ reg-names = "snoc-base", "pcnoc-base";
+
+ /*Buses*/
+
+ fab_pcnoc: fab-pcnoc {
+ cell-id = <MSM_BUS_FAB_PERIPH_NOC>;
+ label = "fab-pcnoc";
+ qcom,fab-dev;
+ qcom,base-name = "pcnoc-base";
+ qcom,bypass-qos-prg;
+ qcom,bus-type = <1>;
+ qcom,qos-off = <0x1000>;
+ qcom,base-offset = <0x0>;
+ clocks = <>;
+ };
+
+ fab_snoc: fab-snoc {
+ cell-id = <MSM_BUS_FAB_SYS_NOC>;
+ label = "fab-snoc";
+ qcom,fab-dev;
+ qcom,base-name = "snoc-base";
+ qcom,bypass-qos-prg;
+ qcom,bus-type = <1>;
+ qcom,qos-off = <0x80>;
+ qcom,base-offset = <0x0>;
+ clocks = <>;
+ };
+
+ /*Masters*/
+
+ mas_blsp_bam: mas-blsp-bam {
+ cell-id = <MSM_BUS_MASTER_BLSP_BAM>;
+ label = "mas-blsp-bam";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_m_0>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_BLSP_BAM>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_usb2_bam: mas-usb2-bam {
+ cell-id = <MSM_BUS_MASTER_USB2_BAM>;
+ label = "mas-usb2-bam";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,qport = <15>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&slv_pcnoc_snoc>;
+ qcom,prio1 = <1>;
+ qcom,prio0 = <1>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_USB2_BAM>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_adss_dma0: mas-adss-dma0 {
+ cell-id = <MSM_BUS_MASTER_ADDS_DMA0>;
+ label = "mas-adss-dma0";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_m_1>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA0>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_adss_dma1: mas-adss-dma1 {
+ cell-id = <MSM_BUS_MASTER_ADDS_DMA1>;
+ label = "mas-adss-dma1";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_m_1>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA1>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_adss_dma2: mas-adss-dma2 {
+ cell-id = <MSM_BUS_MASTER_ADDS_DMA2>;
+ label = "mas-adss-dma2";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_m_1>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA2>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_adss_dma3: mas-adss-dma3 {
+ cell-id = <MSM_BUS_MASTER_ADDS_DMA3>;
+ label = "mas-adss-dma3";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_m_1>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA3>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_qpic_bam: mas-qpic-bam {
+ cell-id = <MSM_BUS_MASTER_QPIC_BAM>;
+ label = "mas-qpic-bam";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_m_0>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_QPIC_BAM>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_spdm: mas-spdm {
+ cell-id = <MSM_BUS_MASTER_SPDM>;
+ label = "mas-spdm";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_m_0>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_SPDM>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_pcnoc_cfg: mas-pcnoc-cfg {
+ cell-id = <MSM_BUS_MASTER_PNOC_CFG>;
+ label = "mas-pcnoc-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&slv_srvc_pcnoc>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_CFG>;
+ };
+
+ mas_tic: mas-tic {
+ cell-id = <MSM_BUS_MASTER_TIC>;
+ label = "mas-tic";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_int_0 &slv_pcnoc_snoc>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_TIC>;
+ };
+
+ mas_sdcc_bam: mas-sdcc-bam {
+ cell-id = <MSM_BUS_MASTER_SDCC_BAM>;
+ label = "mas-sdcc-bam";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,qport = <14>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&slv_pcnoc_snoc>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_SDCC_BAM>;
+ qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
+ &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
+ &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
+ &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
+ &slv_srif &slv_prng &slv_qdss_cfg
+ &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
+ &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
+ &slv_boot_rom &slv_security &slv_spdm
+ &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
+ &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
+ &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
+ &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
+ &slv_sdcc_cfg &slv_snoc_cfg>;
+ };
+
+ mas_snoc_pcnoc: mas-snoc-pcnoc {
+ cell-id = <MSM_BUS_SNOC_PNOC_MAS>;
+ label = "mas-snoc-pcnoc";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,qport = <16>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&pcnoc_int_0>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_SNOC_PCNOC>;
+ };
+
+ mas_qdss_dap: mas-qdss-dap {
+ cell-id = <MSM_BUS_MASTER_QDSS_DAP>;
+ label = "mas-qdss-dap";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&pcnoc_int_0 &slv_pcnoc_snoc>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_QDSS_DAP>;
+ };
+
+ mas_ddrc_snoc: mas-ddrc-snoc {
+ cell-id = <MSM_BUS_MASTER_DDRC_SNOC>;
+ label = "mas-ddrc-snoc";
+ qcom,buswidth = <16>;
+ qcom,ap-owned;
+ qcom,connections = <&snoc_int_0 &snoc_int_1
+ &slv_pcie>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_DDRC_SNOC>;
+ qcom,blacklist = <&slv_snoc_ddrc_m1 &slv_srvc_snoc>;
+ };
+
+ mas_wss_0: mas-wss-0 {
+ cell-id = <MSM_BUS_MASTER_WSS_0>;
+ label = "mas-wss-0";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,qport = <26>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_WSS_0>;
+ qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie
+ &slv_wss1_cfg &slv_wss0_cfg &slv_crypto_cfg
+ &slv_srvc_snoc>;
+ };
+
+ mas_wss_1: mas-wss-1 {
+ cell-id = <MSM_BUS_MASTER_WSS_1>;
+ label = "mas-wss-1";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,qport = <27>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_WSS_1>;
+ qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie
+ &slv_wss1_cfg &slv_wss0_cfg &slv_crypto_cfg
+ &slv_srvc_snoc>;
+ };
+
+ mas_crypto: mas-crypto {
+ cell-id = <MSM_BUS_MASTER_CRYPTO>;
+ label = "mas-crypto";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,qport = <5>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&snoc_int_0 &snoc_int_1
+ &slv_snoc_ddrc_m1>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_CRYPTO>;
+ qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
+ &slv_pcie &slv_qdss_stm &slv_crypto_cfg
+ &slv_srvc_snoc>;
+ };
+
+ mas_ess: mas-ess {
+ cell-id = <MSM_BUS_MASTER_ESS>;
+ label = "mas-ess";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,qport = <44>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_ESS>;
+ qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
+ &slv_pcie &slv_qdss_stm &slv_wss1_cfg
+ &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>;
+ };
+
+ mas_pcie: mas-pcie {
+ cell-id = <MSM_BUS_MASTER_PCIE>;
+ label = "mas-pcie";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,qport = <6>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCIE>;
+ qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie
+ &slv_qdss_stm &slv_wss1_cfg &slv_wss0_cfg
+ &slv_crypto_cfg &slv_srvc_snoc>;
+ };
+
+ mas_usb3: mas-usb3 {
+ cell-id = <MSM_BUS_MASTER_USB3>;
+ label = "mas-usb3";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,qport = <7>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_USB3>;
+ qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
+ &slv_pcie &slv_qdss_stm &slv_wss1_cfg
+ &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>;
+ };
+
+ mas_qdss_etr: mas-qdss-etr {
+ cell-id = <MSM_BUS_MASTER_QDSS_ETR>;
+ label = "mas-qdss-etr";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,qport = <544>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&qdss_int>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_QDSS_ETR>;
+ qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
+ &slv_pcie &slv_qdss_stm &slv_wss1_cfg
+ &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>;
+ };
+
+ mas_qdss_bamndp: mas-qdss-bamndp {
+ cell-id = <MSM_BUS_MASTER_QDSS_BAMNDP>;
+ label = "mas-qdss-bamndp";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,qport = <576>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&qdss_int>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_QDSS_BAMNDP>;
+ qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
+ &slv_pcie &slv_qdss_stm &slv_wss1_cfg
+ &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>;
+ };
+
+ mas_pcnoc_snoc: mas-pcnoc-snoc {
+ cell-id = <MSM_BUS_PNOC_SNOC_MAS>;
+ label = "mas-pcnoc-snoc";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,qport = <384>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&snoc_int_0 &snoc_int_1
+ &slv_snoc_ddrc_m1>;
+ qcom,prio1 = <0>;
+ qcom,prio0 = <0>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PNOC_SNOC>;
+ qcom,blacklist = <&slv_srvc_snoc>;
+ };
+
+ mas_snoc_cfg: mas-snoc-cfg {
+ cell-id = <MSM_BUS_MASTER_QDSS_SNOC_CFG>;
+ label = "mas-snoc-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&slv_srvc_snoc>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_QDSS_SNOC_CFG>;
+ };
+
+ /*Internal nodes*/
+
+
+ pcnoc_m_0: pcnoc-m-0 {
+ cell-id = <MSM_BUS_PNOC_M_0>;
+ label = "pcnoc-m-0";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,qport = <12>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&slv_pcnoc_snoc>;
+ qcom,prio1 = <1>;
+ qcom,prio0 = <1>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_M_0>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_M_0>;
+ };
+
+ pcnoc_m_1: pcnoc-m-1 {
+ cell-id = <MSM_BUS_PNOC_M_1>;
+ label = "pcnoc-m-1";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,qport = <13>;
+ qcom,qos-mode = "fixed";
+ qcom,connections = <&slv_pcnoc_snoc>;
+ qcom,prio1 = <1>;
+ qcom,prio0 = <1>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_M_1>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_M_1>;
+ };
+
+ pcnoc_int_0: pcnoc-int-0 {
+ cell-id = <MSM_BUS_PNOC_INT_0>;
+ label = "pcnoc-int-0";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,connections = < &pcnoc_s_1 &pcnoc_s_2 &pcnoc_s_0
+ &pcnoc_s_4 &pcnoc_s_5
+ &pcnoc_s_6 &pcnoc_s_7
+ &pcnoc_s_8 &pcnoc_s_9
+ &pcnoc_s_3>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_INT_0>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_INT_0>;
+ };
+
+ pcnoc_s_0: pcnoc-s-0 {
+ cell-id = <MSM_BUS_PNOC_SLV_0>;
+ label = "pcnoc-s-0";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&slv_clk_ctl &slv_tcsr &slv_security
+ &slv_tlmm>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_0>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_0>;
+ };
+
+ pcnoc_s_1: pcnoc-s-1 {
+ cell-id = <MSM_BUS_PNOC_SLV_1>;
+ label = "pcnoc-s-1";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_prng_apu_cfg &slv_prng&slv_imem_cfg>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_1>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_1>;
+ };
+
+ pcnoc_s_2: pcnoc-s-2 {
+ cell-id = <MSM_BUS_PNOC_SLV_2>;
+ label = "pcnoc-s-2";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_spdm &slv_pcnoc_mpu_cfg &slv_pcnoc_cfg
+ &slv_boot_rom>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_2>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_2>;
+ };
+
+ pcnoc_s_3: pcnoc-s-3 {
+ cell-id = <MSM_BUS_PNOC_SLV_3>;
+ label = "pcnoc-s-3";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_qdss_cfg&slv_gcnt &slv_snoc_cfg
+ &slv_snoc_mpu_cfg>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_3>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_3>;
+ };
+
+ pcnoc_s_4: pcnoc-s-4 {
+ cell-id = <MSM_BUS_PNOC_SLV_4>;
+ label = "pcnoc-s-4";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&slv_adss_cfg &slv_adss_vmidmt_cfg &slv_adss_apu>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_4>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_4>;
+ };
+
+ pcnoc_s_5: pcnoc-s-5 {
+ cell-id = <MSM_BUS_PNOC_SLV_5>;
+ label = "pcnoc-s-5";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = <&slv_qhss_apu_cfg &slv_fephy_cfg &slv_mdio
+ &slv_srif>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_5>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_5>;
+ };
+
+ pcnoc_s_6: pcnoc-s-6 {
+ cell-id = <MSM_BUS_PNOC_SLV_6>;
+ label = "pcnoc-s-6";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_ddrc_mpu0_cfg &slv_ddrc_apu_cfg &slv_ddrc_mpu2_cfg
+ &slv_ddrc_cfg &slv_ddrc_mpu1_cfg>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_6>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_6>;
+ };
+
+ pcnoc_s_7: pcnoc-s-7 {
+ cell-id = <MSM_BUS_PNOC_SLV_7>;
+ label = "pcnoc-s-7";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_ess_apu_cfg &slv_usb2_cfg&slv_ess_vmidmt_cfg>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_7>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_7>;
+ };
+
+ pcnoc_s_8: pcnoc-s-8 {
+ cell-id = <MSM_BUS_PNOC_SLV_8>;
+ label = "pcnoc-s-8";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_sdcc_cfg &slv_qpic_cfg&slv_blsp_cfg>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_8>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_8>;
+ };
+
+ pcnoc_s_9: pcnoc-s-9 {
+ cell-id = <MSM_BUS_PNOC_SLV_9>;
+ label = "pcnoc-s-9";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_wss1_apu_cfg &slv_wss1_vmidmt_cfg&slv_wss0_vmidmt_cfg
+ &slv_wss0_apu_cfg>;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_9>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_9>;
+ };
+
+ snoc_int_0: snoc-int-0 {
+ cell-id = <MSM_BUS_SNOC_INT_0>;
+ label = "snoc-int-0";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_ocimem&slv_qdss_stm>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_SNOC_INT_0>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_INT_0>;
+ };
+
+ snoc_int_1: snoc-int-1 {
+ cell-id = <MSM_BUS_SNOC_INT_1>;
+ label = "snoc-int-1";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,connections = < &slv_crypto_cfg &slv_a7ss &slv_ess_cfg
+ &slv_usb3_cfg &slv_wss1_cfg
+ &slv_wss0_cfg>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_SNOC_INT_1>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_INT_1>;
+ };
+
+ qdss_int: qdss-int {
+ cell-id = <MSM_BUS_SNOC_QDSS_INT>;
+ label = "qdss-int";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,mas-rpm-id = <ICBID_MASTER_QDSS_INT>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_INT>;
+ };
+ /*Slaves*/
+
+ slv_clk_ctl:slv-clk-ctl {
+ cell-id = <MSM_BUS_SLAVE_CLK_CTL>;
+ label = "slv-clk-ctl";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_CLK_CTL>;
+ };
+
+ slv_security:slv-security {
+ cell-id = <MSM_BUS_SLAVE_SECURITY>;
+ label = "slv-security";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SECURITY>;
+ };
+
+ slv_tcsr:slv-tcsr {
+ cell-id = <MSM_BUS_SLAVE_TCSR>;
+ label = "slv-tcsr";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_TCSR>;
+ };
+
+ slv_tlmm:slv-tlmm {
+ cell-id = <MSM_BUS_SLAVE_TLMM>;
+ label = "slv-tlmm";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_TLMM>;
+ };
+
+ slv_imem_cfg:slv-imem-cfg {
+ cell-id = <MSM_BUS_SLAVE_IMEM_CFG>;
+ label = "slv-imem-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_IMEM_CFG>;
+ };
+
+ slv_prng:slv-prng {
+ cell-id = <MSM_BUS_SLAVE_PRNG>;
+ label = "slv-prng";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PRNG>;
+ };
+
+ slv_prng_apu_cfg:slv-prng-apu-cfg {
+ cell-id = <MSM_BUS_SLAVE_PRNG_APU_CFG>;
+ label = "slv-prng-apu-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PRNG_APU_CFG>;
+ };
+
+ slv_boot_rom:slv-boot-rom {
+ cell-id = <MSM_BUS_SLAVE_BOOT_ROM>;
+ label = "slv-boot-rom";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_BOOT_ROM>;
+ };
+
+ slv_spdm:slv-spdm {
+ cell-id = <MSM_BUS_SLAVE_SPDM_WRAPPER>;
+ label = "slv-spdm";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SPDM_WRAPPER>;
+ };
+
+ slv_pcnoc_cfg:slv-pcnoc-cfg {
+ cell-id = <MSM_BUS_SLAVE_PNOC_CFG>;
+ label = "slv-pcnoc-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PNOC_CFG>;
+ };
+
+ slv_pcnoc_mpu_cfg:slv-pcnoc-mpu-cfg {
+ cell-id = <MSM_BUS_SLAVE_PERIPH_MPU_CFG>;
+ label = "slv-pcnoc-mpu-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PERIPH_MPU_CFG>;
+ };
+
+ slv_gcnt:slv-gcnt {
+ cell-id = <MSM_BUS_SLAVE_GCNT>;
+ label = "slv-gcnt";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_GCNT>;
+ };
+
+ slv_qdss_cfg:slv-qdss-cfg {
+ cell-id = <MSM_BUS_SLAVE_QDSS_CFG>;
+ label = "slv-qdss-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_CFG>;
+ };
+
+ slv_snoc_cfg:slv-snoc-cfg {
+ cell-id = <MSM_BUS_SLAVE_SNOC_CFG>;
+ label = "slv-snoc-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_CFG>;
+ };
+
+ slv_snoc_mpu_cfg:slv-snoc-mpu-cfg {
+ cell-id = <MSM_BUS_SLAVE_SNOC_MPU_CFG>;
+ label = "slv-snoc-mpu-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_MPU_CFG>;
+ };
+
+ slv_adss_cfg:slv-adss-cfg {
+ cell-id = <MSM_BUS_SLAVE_ADSS_CFG>;
+ label = "slv-adss-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_CFG>;
+ };
+
+ slv_adss_apu:slv-adss-apu {
+ cell-id = <MSM_BUS_SLAVE_ADSS_VMIDMT_CFG>;
+ label = "slv-adss-apu";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_APU>;
+ };
+
+ slv_adss_vmidmt_cfg:slv-adss-vmidmt-cfg {
+ cell-id = <MSM_BUS_SLAVE_ADSS_VMIDMT_CFG>;
+ label = "slv-adss-vmidmt-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_VMIDMT_CFG>;
+ };
+
+ slv_qhss_apu_cfg:slv-qhss-apu-cfg {
+ cell-id = <MSM_BUS_SLAVE_QHSS_APU_CFG>;
+ label = "slv-qhss-apu-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_QHSS_APU_CFG>;
+ };
+
+ slv_mdio:slv-mdio {
+ cell-id = <MSM_BUS_SLAVE_MDIO>;
+ label = "slv-mdio";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_MDIO>;
+ };
+
+ slv_fephy_cfg:slv-fephy-cfg {
+ cell-id = <MSM_BUS_SLAVE_FEPHY_CFG>;
+ label = "slv-fephy-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_FEPHY_CFG>;
+ };
+
+ slv_srif:slv-srif {
+ cell-id = <MSM_BUS_SLAVE_SRIF>;
+ label = "slv-srif";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SRIF>;
+ };
+
+ slv_ddrc_cfg:slv-ddrc-cfg {
+ cell-id = <MSM_BUS_SLAVE_DDRC_CFG>;
+ label = "slv-ddrc-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_CFG>;
+ };
+
+ slv_ddrc_apu_cfg:slv-ddrc-apu-cfg {
+ cell-id = <MSM_BUS_SLAVE_DDRC_APU_CFG>;
+ label = "slv-ddrc-apu-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_APU_CFG>;
+ };
+
+ slv_ddrc_mpu0_cfg:slv-ddrc-mpu0-cfg {
+ cell-id = <MSM_BUS_SLAVE_MPU0_CFG>;
+ label = "slv-ddrc-mpu0-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU0_CFG>;
+ };
+
+ slv_ddrc_mpu1_cfg:slv-ddrc-mpu1-cfg {
+ cell-id = <MSM_BUS_SLAVE_MPU1_CFG>;
+ label = "slv-ddrc-mpu1-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU1_CFG>;
+ };
+
+ slv_ddrc_mpu2_cfg:slv-ddrc-mpu2-cfg {
+ cell-id = <MSM_BUS_SLAVE_MPU2_CFG>;
+ label = "slv-ddrc-mpu2-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU2_CFG>;
+ };
+
+ slv_ess_vmidmt_cfg:slv-ess-vmidmt-cfg {
+ cell-id = <MSM_BUS_SLAVE_ESS_VMIDMT_CFG>;
+ label = "slv-ess-vmidmt-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_ESS_VMIDMT_CFG>;
+ };
+
+ slv_ess_apu_cfg:slv-ess-apu-cfg {
+ cell-id = <MSM_BUS_SLAVE_ESS_APU_CFG>;
+ label = "slv-ess-apu-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_ESS_APU_CFG>;
+ };
+
+ slv_usb2_cfg:slv-usb2-cfg {
+ cell-id = <MSM_BUS_SLAVE_USB2_CFG>;
+ label = "slv-usb2-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_USB2_CFG>;
+ };
+
+ slv_blsp_cfg:slv-blsp-cfg {
+ cell-id = <MSM_BUS_SLAVE_BLSP_CFG>;
+ label = "slv-blsp-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_BLSP_CFG>;
+ };
+
+ slv_qpic_cfg:slv-qpic-cfg {
+ cell-id = <MSM_BUS_SLAVE_QPIC_CFG>;
+ label = "slv-qpic-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_QPIC_CFG>;
+ };
+
+ slv_sdcc_cfg:slv-sdcc-cfg {
+ cell-id = <MSM_BUS_SLAVE_SDCC_CFG>;
+ label = "slv-sdcc-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SDCC_CFG>;
+ };
+
+ slv_wss0_vmidmt_cfg:slv-wss0-vmidmt-cfg {
+ cell-id = <MSM_BUS_SLAVE_WSS0_VMIDMT_CFG>;
+ label = "slv-wss0-vmidmt-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_VMIDMT_CFG>;
+ };
+
+ slv_wss0_apu_cfg:slv-wss0-apu-cfg {
+ cell-id = <MSM_BUS_SLAVE_WSS0_APU_CFG>;
+ label = "slv-wss0-apu-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_APU_CFG>;
+ };
+
+ slv_wss1_vmidmt_cfg:slv-wss1-vmidmt-cfg {
+ cell-id = <MSM_BUS_SLAVE_WSS1_VMIDMT_CFG>;
+ label = "slv-wss1-vmidmt-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_VMIDMT_CFG>;
+ };
+
+ slv_wss1_apu_cfg:slv-wss1-apu-cfg {
+ cell-id = <MSM_BUS_SLAVE_WSS1_APU_CFG>;
+ label = "slv-wss1-apu-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_APU_CFG>;
+ };
+
+ slv_pcnoc_snoc:slv-pcnoc-snoc {
+ cell-id = <MSM_BUS_PNOC_SNOC_SLV>;
+ label = "slv-pcnoc-snoc";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_SNOC>;
+ };
+
+ slv_srvc_pcnoc:slv-srvc-pcnoc {
+ cell-id = <MSM_BUS_SLAVE_SRVC_PCNOC>;
+ label = "slv-srvc-pcnoc";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_pcnoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SRVC_PCNOC>;
+ };
+
+ slv_snoc_ddrc_m1:slv-snoc-ddrc-m1 {
+ cell-id = <MSM_BUS_SLAVE_SNOC_DDRC>;
+ label = "slv-snoc-ddrc-m1";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_DDRC>;
+ };
+
+ slv_a7ss:slv-a7ss {
+ cell-id = <MSM_BUS_SLAVE_A7SS>;
+ label = "slv-a7ss";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_A7SS>;
+ };
+
+ slv_ocimem:slv-ocimem {
+ cell-id = <MSM_BUS_SLAVE_OCIMEM>;
+ label = "slv-ocimem";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_OCIMEM>;
+ };
+
+ slv_wss0_cfg:slv-wss0-cfg {
+ cell-id = <MSM_BUS_SLAVE_WSS0_CFG>;
+ label = "slv-wss0-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_CFG>;
+ };
+
+ slv_wss1_cfg:slv-wss1-cfg {
+ cell-id = <MSM_BUS_SLAVE_WSS1_CFG>;
+ label = "slv-wss1-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_CFG>;
+ };
+
+ slv_pcie:slv-pcie {
+ cell-id = <MSM_BUS_SLAVE_PCIE>;
+ label = "slv-pcie";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_PCIE>;
+ };
+
+ slv_usb3_cfg:slv-usb3-cfg {
+ cell-id = <MSM_BUS_SLAVE_USB3_CFG>;
+ label = "slv-usb3-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_USB3_CFG>;
+ };
+
+ slv_crypto_cfg:slv-crypto-cfg {
+ cell-id = <MSM_BUS_SLAVE_CRYPTO_CFG>;
+ label = "slv-crypto-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_CRYPTO_CFG>;
+ };
+
+ slv_ess_cfg:slv-ess-cfg {
+ cell-id = <MSM_BUS_SLAVE_ESS_CFG>;
+ label = "slv-ess-cfg";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_ESS_CFG>;
+ };
+
+ slv_qdss_stm:slv-qdss-stm {
+ cell-id = <MSM_BUS_SLAVE_QDSS_STM>;
+ label = "slv-qdss-stm";
+ qcom,buswidth = <4>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_STM>;
+ };
+
+ slv_srvc_snoc:slv-srvc-snoc {
+ cell-id = <MSM_BUS_SLAVE_SRVC_SNOC>;
+ label = "slv-srvc-snoc";
+ qcom,buswidth = <8>;
+ qcom,ap-owned;
+ qcom,bus-dev = <&fab_snoc>;
+ qcom,slv-rpm-id = <ICBID_SLAVE_SRVC_SNOC>;
+ };
+ };
+};
+
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
new file mode 100644
index 0000000000..fdd565c2ea
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
@@ -0,0 +1,293 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include "qcom-ipq4019-bus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "AVM FRITZ!Box 4040";
+ compatible = "avm,fritzbox-4040", "qcom,ipq4019";
+
+ reserved-memory {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+
+ rsvd1@87000000 {
+ reg = <0x87000000 0x500000>;
+ no-map;
+ };
+
+ wifi_dump@87500000 {
+ reg = <0x87500000 0x600000>;
+ no-map;
+ };
+
+ rsvd2@87B00000 {
+ reg = <0x87b00000 0x500000>;
+ no-map;
+ };
+ };
+/*
+ This also works. Maybe it could be smaller still.
+
+ reserved-memory {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+
+ rsvd1@87E00000 {
+ reg = <0x87e00000 0x200000>;
+ no-map;
+ };
+ };
+*/
+
+ soc {
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "ok";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ qca8075: ess-switch@c000000 {
+ status = "okay";
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ enable-usb-power {
+ gpio-hog;
+ line-name = "enable USB3 power";
+ gpios = <0x7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ wifi@a000000 {
+ status = "okay";
+ };
+
+ wifi@a800000 {
+ status = "okay";
+ };
+
+ cryptobam: dma@8e04000 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wlan {
+ label = "wlan";
+ gpios = <&tlmm 0x3a GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &flash;
+ led-running = &power;
+ led-upgrade = &flash;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "fritz4040:green:wlan";
+ gpios = <&qca8075 0x1 GPIO_ACTIVE_HIGH>;
+ };
+
+ panic: info_red {
+ label = "fritz4040:red:info";
+ gpios = <&qca8075 0x3 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ wan {
+ label = "fritz4040:green:wan";
+ gpios = <&qca8075 0x5 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "fritz4040:green:power";
+ gpios = <&qca8075 0xb GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "fritz4040:green:lan";
+ gpios = <&qca8075 0xd GPIO_ACTIVE_HIGH>;
+ };
+
+ flash: info_amber {
+ label = "fritz4040:amber:info";
+ gpios = <&qca8075 0xf GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi_0 { /* BLSP1 QUP1 */
+ status = "ok";
+
+ mx25l25635e@0 {
+ status = "disabled";
+ };
+
+ mx25l25635f@0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ status = "ok";
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition1@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition2@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition3@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition4@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition5@e0000 {
+ label = "APPSBLENV"; /* uboot env - empty */
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition6@f0000 {
+ label = "urlader"; /* APPSBL */
+ reg = <0x000f0000 0x0002dc000>;
+ read-only;
+ };
+ partition7@11dc00 {
+ /* make a backup of this partition! */
+ label = "urlader_config";
+ reg = <0x0011dc00 0x00002400>;
+ read-only;
+ };
+ partition8@120000 {
+ label = "tffs1";
+ reg = <0x00120000 0x00080000>;
+ read-only;
+ };
+ partition9@1a0000 {
+ label = "tffs2";
+ reg = <0x001a0000 0x00080000>;
+ read-only;
+ };
+ partition10@220000 {
+ label = "uboot";
+ reg = <0x00220000 0x00080000>;
+ read-only;
+ };
+ partition11@2A0000 {
+ label = "image"; /* firmware */
+ reg = <0x002A0000 0x01C60000>;
+ };
+ partition12@1f00000 {
+ label = "jffs2";
+ reg = <0x01F00000 0x00100000>;
+ };
+ };
+ };
+};
+
+&cpu0_opp_table {
+ /delete-node/ opp@666000000;
+
+ opp@710000000 {
+ opp-hz = /bits/ 64 <710000000>;
+ clock-latency-ns = <256000>;
+ };
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
new file mode 100644
index 0000000000..b58f4dbe30
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts
@@ -0,0 +1,208 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include "qcom-ipq4019-bus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ZyXEL NBG6617";
+ compatible = "zyxel,nbg6617", "qcom,ipq4019";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ reserved-memory {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+
+ rsvd1@87000000 {
+ reg = <0x87000000 0x0500000>;
+ no-map;
+ };
+
+ wifi_dump@87500000 {
+ reg = <0x87500000 0x600000>;
+ no-map;
+ };
+
+ rsvd2@87B00000 {
+ reg = <0x87b00000 0x500000>;
+ no-map;
+ };
+ };
+
+ soc {
+ pinctrl@0x01000000 {
+ led_pinmux {
+ mux {
+ pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
+ drive-strength = <0x8>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "ok";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ wifi@a000000 {
+ status = "okay";
+ };
+
+ wifi@a800000 {
+ status = "okay";
+ };
+
+ cryptobam: dma@8e04000 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wlan {
+ label = "wlan";
+ gpios = <&tlmm 0x2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 0x3f GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 0x4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "nbg6617:green:power";
+ gpios = <&tlmm 0x3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "nbg6617:green:wps";
+ gpios = <&tlmm 0x1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2G {
+ label = "nbg6617:green:wlan2G";
+ gpios = <&tlmm 0x3a GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5G {
+ label = "nbg6617:green:wlan5G";
+ gpios = <&tlmm 0x5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+
+&spi_0 { /* BLSP1 QUP1 */
+ status = "ok";
+
+ mx25l25635e@0 {
+ status = "disabled";
+ };
+
+ n25q128a11@0 {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "all";
+ reg = <0x00000000 0x08000000>;
+ read-only; /* for now */
+ };
+ };
+
+ };
+};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
new file mode 100644
index 0000000000..e11868dcf7
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts
@@ -0,0 +1,271 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include "qcom-ipq4019-bus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ASUS RT-AC58U";
+ compatible = "asus,rt-ac58u", "qcom,ipq4019";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>;
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ reserved-memory {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+
+ rsvd1@87E00000 {
+ reg = <0x87e00000 0x200000>;
+ no-map;
+ };
+ };
+
+ soc {
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "ok";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ wifi@a000000 {
+ status = "okay";
+ };
+
+ wifi@a800000 {
+ status = "okay";
+ };
+
+ cryptobam: dma@8e04000 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power: status {
+ label = "rt-ac58u:blue:status";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "rt-ac58u:blue:wan";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2G {
+ label = "rt-ac58u:blue:wlan2G";
+ gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan5G {
+ label = "rt-ac58u:blue:wlan5G";
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "rt-ac58u:blue:usb";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "rt-ac58u:blue:lan";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi_0_pins {
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio59";
+ };
+ pinconf_cs {
+ pins = "gpio54", "gpio59";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+};
+
+
+&spi_0 { /* BLSP1 QUP1 */
+ status = "ok";
+ cs-gpios = <&tlmm 54 0>,
+ <&tlmm 59 0>;
+
+ mx25l25635e@0 {
+ status = "disabled";
+ };
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /*
+ * U-boot looks for "n25q128a11" node,
+ * if we don't have it, it will spit out the following warning:
+ * "ipq: fdt fixup unable to find compatible node".
+ */
+ compatible = "mx25l1606e", "n25q128a11";
+ reg = <0>;
+ linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition1@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition2@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition3@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition4@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition5@e0000 {
+ label = "APPSBLENV"; /* uboot env*/
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition5@f0000 {
+ label = "APPSBL"; /* uboot */
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+ partition5@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ /* 0x00180000 - 0x00200000 unused */
+ };
+ };
+
+ mt29f@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "spinand,mt29f", "w25n01gv";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "ubi";
+ reg = <0x00000000 0x08000000>;
+ };
+ };
+ };
+};
diff --git a/target/linux/ipq806x/patches-4.9/0022-dts-ipq4019-support-ARMv7-PMU.patch b/target/linux/ipq806x/patches-4.9/0022-dts-ipq4019-support-ARMv7-PMU.patch
index e5dbba7b8b..c427d66efd 100644
--- a/target/linux/ipq806x/patches-4.9/0022-dts-ipq4019-support-ARMv7-PMU.patch
+++ b/target/linux/ipq806x/patches-4.9/0022-dts-ipq4019-support-ARMv7-PMU.patch
@@ -13,7 +13,7 @@ Signed-off-by: Matthew McClintock <mmcclint@qca.qualcomm.com>
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -118,6 +118,12 @@
+@@ -108,6 +108,12 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
diff --git a/target/linux/ipq806x/patches-4.9/0024-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch b/target/linux/ipq806x/patches-4.9/0024-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
deleted file mode 100644
index cea6bd0a79..0000000000
--- a/target/linux/ipq806x/patches-4.9/0024-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 0fba6eceb6e16fa8fd5834d65fcb771fa263a44b Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Thu, 17 Mar 2016 16:22:28 -0500
-Subject: [PATCH 24/69] qcom: ipq4019: add USB nodes to ipq4019 SoC device tree
-
-This adds the SoC nodes to the ipq4019 device tree
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 67 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 67 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -313,5 +313,72 @@
- compatible = "qcom,pshold";
- reg = <0x4ab000 0x4>;
- };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ compatible = "qca,uni-ssphy";
-+ reg = <0x9a000 0x800>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
-+ reset-names = "por_rst";
-+ status = "disabled";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ compatible = "qca,baldur-usb3-hsphy";
-+ reg = <0xa6000 0x40>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+ status = "disabled";
-+ };
-+
-+ usb3@0 {
-+ compatible = "qcom,dwc3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc GCC_USB3_MASTER_CLK>;
-+ clock-names = "core";
-+ ranges;
-+ status = "disabled";
-+
-+ dwc3@8a00000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x8a00000 0xf8000>;
-+ interrupts = <0 132 0>;
-+ usb-phy = <&usb3_hs_phy>, <&usb3_ss_phy>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ tx-fifo-resize;
-+ dr_mode = "host";
-+ };
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ compatible = "qca,baldur-usb2-hsphy";
-+ reg = <0xa8000 0x40>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+ status = "disabled";
-+ };
-+
-+ usb2@0 {
-+ compatible = "qcom,dwc3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc GCC_USB2_MASTER_CLK>;
-+ clock-names = "core";
-+ ranges;
-+ status = "disabled";
-+
-+ dwc3@6000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x6000000 0xf8000>;
-+ interrupts = <0 136 0>;
-+ usb-phy = <&usb2_hs_phy>;
-+ phy-names = "usb2-phy";
-+ tx-fifo-resize;
-+ dr_mode = "host";
-+ };
-+ };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.9/0025-qcom-ipq4019-enable-USB-bus-for-DK01.1-board.patch b/target/linux/ipq806x/patches-4.9/0025-qcom-ipq4019-enable-USB-bus-for-DK01.1-board.patch
deleted file mode 100644
index 975f42f7d1..0000000000
--- a/target/linux/ipq806x/patches-4.9/0025-qcom-ipq4019-enable-USB-bus-for-DK01.1-board.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From ae5e11c926f710595d0080e51bd10e704776669d Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Mon, 21 Mar 2016 16:12:05 -0500
-Subject: [PATCH 25/69] qcom: ipq4019: enable USB bus for DK01.1 board
-
-This enables the USB block
-
-Change-Id: I384dd1874bba341713f384cf6199abd446e3f3c0
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -108,5 +108,29 @@
- watchdog@b017000 {
- status = "ok";
- };
-+
-+ usb3_ss_phy: ssphy@0 {
-+ status = "ok";
-+ };
-+
-+ dummy_ss_phy: ssphy@1 {
-+ status = "ok";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ status = "ok";
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ status = "ok";
-+ };
-+
-+ usb3: usb3@8a00000 {
-+ status = "ok";
-+ };
-+
-+ usb2: usb2@6000000 {
-+ status = "ok";
-+ };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch b/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch
index 32c52b07ed..de0ea8e89a 100644
--- a/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch
+++ b/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch
@@ -32,40 +32,6 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -109,11 +109,7 @@
- status = "ok";
- };
-
-- usb3_ss_phy: ssphy@0 {
-- status = "ok";
-- };
--
-- dummy_ss_phy: ssphy@1 {
-+ usb3_ss_phy: ssphy@9a000 {
- status = "ok";
- };
-
-@@ -121,15 +117,15 @@
- status = "ok";
- };
-
-- usb2_hs_phy: hsphy@a8000 {
-+ usb3@0 {
- status = "ok";
- };
-
-- usb3: usb3@8a00000 {
-+ usb2_hs_phy: hsphy@a8000 {
- status = "ok";
- };
-
-- usb2: usb2@6000000 {
-+ usb2@0{
- status = "ok";
- };
- };
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -0,0 +1,21 @@
@@ -142,13 +108,13 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+ };
+ };
+
-+ serial_1_pins: serial1_pinmux {
-+ mux {
-+ pins = "gpio8", "gpio9";
-+ function = "blsp_uart1";
-+ bias-disable;
-+ };
-+ };
++ serial_1_pins: serial1_pinmux {
++ mux {
++ pins = "gpio8", "gpio9";
++ function = "blsp_uart1";
++ bias-disable;
++ };
++ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
@@ -204,12 +170,12 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+ };
+ };
+
-+ i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
-+ pinctrl-0 = <&i2c_0_pins>;
-+ pinctrl-names = "default";
++ i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
++ pinctrl-0 = <&i2c_0_pins>;
++ pinctrl-names = "default";
+
+ status = "ok";
-+ };
++ };
+
+ serial@78af000 {
+ pinctrl-0 = <&serial_0_pins>;
@@ -217,31 +183,31 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+ status = "ok";
+ };
+
-+ serial@78b0000 {
-+ pinctrl-0 = <&serial_1_pins>;
-+ pinctrl-names = "default";
-+ status = "ok";
-+ };
++ serial@78b0000 {
++ pinctrl-0 = <&serial_1_pins>;
++ pinctrl-names = "default";
++ status = "ok";
++ };
+
-+ usb3_ss_phy: ssphy@9a000 {
-+ status = "ok";
-+ };
++ usb3_ss_phy: ssphy@9a000 {
++ status = "ok";
++ };
+
-+ usb3_hs_phy: hsphy@a6000 {
-+ status = "ok";
-+ };
++ usb3_hs_phy: hsphy@a6000 {
++ status = "ok";
++ };
+
-+ usb3: usb3@0 {
-+ status = "ok";
-+ };
++ usb3: usb3@8af8800 {
++ status = "ok";
++ };
+
-+ usb2_hs_phy: hsphy@a8000 {
-+ status = "ok";
-+ };
++ usb2_hs_phy: hsphy@a8000 {
++ status = "ok";
++ };
+
-+ usb2: usb2@6000000 {
-+ status = "ok";
-+ };
++ usb2: usb2@60f8800 {
++ status = "ok";
++ };
+
+ cryptobam: dma@8e04000 {
+ status = "ok";
diff --git a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
index 860ee62eda..bab2808789 100644
--- a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
@@ -10,9 +10,13 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -619,6 +619,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -618,7 +618,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c1.dtb \
++ qcom-ipq4019-fritz4040.dtb \
++ qcom-ipq4019-nbg6617.dtb \
++ qcom-ipq4019-rt-ac58u.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
diff --git a/target/linux/ipq806x/patches-4.9/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch b/target/linux/ipq806x/patches-4.9/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch
new file mode 100644
index 0000000000..5aa37db086
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch
@@ -0,0 +1,56 @@
+From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Mon, 14 Nov 2016 23:49:22 +0100
+Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip
+
+This patch adds the W25N01GV NAND to the table of
+known devices. Without this patch the device gets detected:
+
+nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
+nand: Unknown NAND 256MiB 1,8V 8-bit
+nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16
+
+Whereas the u-boot identifies it as:
+spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21
+SF: Detected W25N01GV with page size 2 KiB, total 128 MiB
+
+Due to the page size discrepancy, it's impossible to attach
+ubi volumes on the device.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/mtd/nand/nand_ids.c | 4 ++++
+ include/linux/mtd/nand.h | 1 +
+ 2 files changed, 5 insertions(+)
+
+--- a/drivers/mtd/nand/nand_ids.c
++++ b/drivers/mtd/nand/nand_ids.c
+@@ -52,6 +52,10 @@ struct nand_flash_dev nand_flash_ids[] =
+ { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
+ SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
+ NAND_ECC_INFO(40, SZ_1K), 4 },
++ {"W25N01GV 1G 3.3V 8-bit",
++ { .id = {0xef, 0xaa} },
++ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE,
++ 2, 64, NAND_ECC_INFO(1, SZ_512) },
+
+ LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
+@@ -182,6 +186,7 @@ struct nand_manufacturers nand_manuf_ids
+ {NAND_MFR_SANDISK, "SanDisk"},
+ {NAND_MFR_INTEL, "Intel"},
+ {NAND_MFR_ATO, "ATO"},
++ {NAND_MFR_WINBOND, "Winbond"},
+ {0x0, "Unknown"}
+ };
+
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -924,6 +924,7 @@ static inline void nand_set_controller_d
+ #define NAND_MFR_MICRON 0x2c
+ #define NAND_MFR_AMD 0x01
+ #define NAND_MFR_MACRONIX 0xc2
++#define NAND_MFR_WINBOND 0xef
+ #define NAND_MFR_EON 0x92
+ #define NAND_MFR_SANDISK 0x45
+ #define NAND_MFR_INTEL 0x89
diff --git a/target/linux/ipq806x/patches-4.9/105-mtd-nor-add-mx25l25635f.patch b/target/linux/ipq806x/patches-4.9/105-mtd-nor-add-mx25l25635f.patch
new file mode 100644
index 0000000000..de54dba058
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/105-mtd-nor-add-mx25l25635f.patch
@@ -0,0 +1,22 @@
+Subject: mtd: spi-nor: add mx25l25635f with SECT_4K
+
+This patch fixes an issue with the creation of the
+ubi volume on the AVM FRITZ!Box 4040. The mx25l25635f
+and mx25l25635e support SECT_4K which will set the
+erase size to 4K. This is used by ubi to calculate
+VID header offsets. Without this, uboot and linux
+disagrees about the layout and refuse to attach
+the ubi volume created by the other.
+
+---
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1018,7 +1018,7 @@ static const struct flash_info spi_nor_i
+ { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+ { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
++ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) },
+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K) },
+ { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+ { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
diff --git a/target/linux/ipq806x/patches-4.9/130-pinctrl-ipq4019-add-pinctrl.patch b/target/linux/ipq806x/patches-4.9/130-pinctrl-ipq4019-add-pinctrl.patch
new file mode 100644
index 0000000000..2c285df7f3
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/130-pinctrl-ipq4019-add-pinctrl.patch
@@ -0,0 +1,51 @@
+From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Thu, 16 Mar 2017 21:00:18 +0100
+Subject: [PATCH] pinctrl: ipq4019: Add missing pingroups
+
+This patch adds the missing PINGROUP for GPIO70-99.
+This fixes a crash that happens in pinctrl-msm, if any
+of the GPIO70-99 are accessed.
+
+Fixes: 5303f7827fcd41d ("pinctrl: qcom: ipq4019: set ngpios to correct value")
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+--- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
++++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
+@@ -405,6 +405,36 @@ static const struct msm_pingroup ipq4019
+ PINGROUP(67, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(69, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(70, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(71, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(72, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(73, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(74, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(75, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(76, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(77, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(78, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(79, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(80, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(81, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(82, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(83, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(84, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(85, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(86, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(87, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(88, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(89, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(90, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(91, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(92, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(93, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(94, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(95, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(96, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(97, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(98, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
++ PINGROUP(99, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+ };
+
+ static const struct msm_pinctrl_soc_data ipq4019_pinctrl = {
diff --git a/target/linux/ipq806x/patches-4.9/0021-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch b/target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
index 887ebf39b6..560eee7d22 100644
--- a/target/linux/ipq806x/patches-4.9/0021-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
+++ b/target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
@@ -1,19 +1,23 @@
-From 644ad7209637b02a0ca6d72f0715a9f52532fc70 Mon Sep 17 00:00:00 2001
+From 6a6c067b7ce2b3de4efbafddc134afbea3ddc1a3 Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Fri, 8 Apr 2016 15:26:10 -0500
-Subject: [PATCH 21/69] qcom: ipq4019: use v2 of the kpss bringup mechanism
+Subject: [PATCH] qcom: ipq4019: use v2 of the kpss bringup mechanism
-v1 was the incorrect choice here and sometimes the board would not come
-up properly
+v1 was the incorrect choice here and sometimes the board
+would not come up properly.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+Changes:
+ - moved L2-Cache to be a subnode of cpu0
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -34,7 +34,8 @@
+@@ -34,19 +34,27 @@
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -23,7 +27,17 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
-@@ -46,7 +47,8 @@
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ clock-frequency = <0>;
+ operating-points-v2 = <&cpu0_opp_table>;
++
++ L2: l2-cache {
++ compatible = "qcom,arch-cache";
++ cache-level = <2>;
++ qcom,saw = <&saw_l2>;
++ };
+ };
+
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -33,7 +47,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
-@@ -58,7 +60,8 @@
+@@ -58,7 +66,8 @@
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -43,7 +57,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
-@@ -70,7 +73,8 @@
+@@ -70,7 +79,8 @@
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -53,20 +67,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
-@@ -100,6 +104,12 @@
- opp-hz = /bits/ 64 <666000000>;
- clock-latency-ns = <256000>;
- };
-+
-+ L2: l2-cache {
-+ compatible = "qcom,arch-cache";
-+ cache-level = <2>;
-+ qcom,saw = <&saw_l2>;
-+ };
- };
-
- pmu {
-@@ -212,22 +222,22 @@
+@@ -218,22 +228,22 @@
};
acc0: clock-controller@b088000 {
@@ -93,7 +94,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};
-@@ -255,6 +265,12 @@
+@@ -261,6 +271,12 @@
regulator;
};
diff --git a/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch b/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
new file mode 100644
index 0000000000..b780d78813
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
@@ -0,0 +1,130 @@
+From ea5f4d6f4716f3a0bb4fc3614b7a0e8c0df1cb81 Mon Sep 17 00:00:00 2001
+From: Matthew McClintock <mmcclint@codeaurora.org>
+Date: Thu, 17 Mar 2016 16:22:28 -0500
+Subject: [PATCH] qcom: ipq4019: add USB nodes to ipq4019 SoC device tree
+
+This adds the SoC nodes to the ipq4019 device tree and
+enable it for the DK01.1 board.
+
+Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+Changes:
+ - replaced space with tab
+ - added sleep and mock_utmi clocks
+ - added registers for usb2 and usb3 parent node
+ - changed compatible to qca,ipa4019-dwc3
+ - updated usb2 and usb3 names
+ (included the reg - in case they become necessary later)
+---
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 71 +++++++++++++++++++++++++++
+ 2 files changed, 91 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -108,5 +108,25 @@
+ watchdog@b017000 {
+ status = "ok";
+ };
++
++ usb3_ss_phy: ssphy@9a000 {
++ status = "ok";
++ };
++
++ usb3_hs_phy: hsphy@a6000 {
++ status = "ok";
++ };
++
++ usb3: usb3@8af8800 {
++ status = "ok";
++ };
++
++ usb2_hs_phy: hsphy@a8000 {
++ status = "ok";
++ };
++
++ usb2: usb2@60f8800 {
++ status = "ok";
++ };
+ };
+ };
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -313,5 +313,76 @@
+ compatible = "qcom,pshold";
+ reg = <0x4ab000 0x4>;
+ };
++
++ usb3_ss_phy: ssphy@9a000 {
++ compatible = "qca,uni-ssphy";
++ reg = <0x9a000 0x800>;
++ reg-names = "phy_base";
++ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
++ reset-names = "por_rst";
++ status = "disabled";
++ };
++
++ usb3_hs_phy: hsphy@a6000 {
++ compatible = "qca,baldur-usb3-hsphy";
++ reg = <0xa6000 0x40>;
++ reg-names = "phy_base";
++ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
++ reset-names = "por_rst", "srif_rst";
++ status = "disabled";
++ };
++
++ usb3@8af8800 {
++ compatible = "qca,ipq4019-dwc3";
++ reg = <0x8af8800 0x100>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ clocks = <&gcc GCC_USB3_MASTER_CLK>,
++ <&gcc GCC_USB3_SLEEP_CLK>,
++ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
++ clock-names = "master", "sleep", "mock_utmi";
++ ranges;
++ status = "disabled";
++
++ dwc3@8a00000 {
++ compatible = "snps,dwc3";
++ reg = <0x8a00000 0xf8000>;
++ interrupts = <0 132 0>;
++ usb-phy = <&usb3_hs_phy>, <&usb3_ss_phy>;
++ phy-names = "usb2-phy", "usb3-phy";
++ dr_mode = "host";
++ };
++ };
++
++ usb2_hs_phy: hsphy@a8000 {
++ compatible = "qca,baldur-usb2-hsphy";
++ reg = <0xa8000 0x40>;
++ reg-names = "phy_base";
++ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
++ reset-names = "por_rst", "srif_rst";
++ status = "disabled";
++ };
++
++ usb2@60f8800 {
++ compatible = "qca,ipq4019-dwc3";
++ reg = <0x60f8800 0x100>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ clocks = <&gcc GCC_USB2_MASTER_CLK>,
++ <&gcc GCC_USB2_SLEEP_CLK>,
++ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
++ clock-names = "master", "sleep", "mock_utmi";
++ ranges;
++ status = "disabled";
++
++ dwc3@6000000 {
++ compatible = "snps,dwc3";
++ reg = <0x6000000 0xf8000>;
++ interrupts = <0 136 0>;
++ usb-phy = <&usb2_hs_phy>;
++ phy-names = "usb2-phy";
++ dr_mode = "host";
++ };
++ };
+ };
+ };
diff --git a/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch
new file mode 100644
index 0000000000..4cbcc0aea2
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch
@@ -0,0 +1,35 @@
+From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sat, 19 Nov 2016 00:58:18 +0100
+Subject: [PATCH] ARM: qcom: Add IPQ4019 SoC support
+
+Add support for the Qualcomm Atheros IPQ4019 SoC.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ arch/arm/Makefile | 1 +
+ arch/arm/mach-qcom/Kconfig | 5 +++++
+ 2 files changed, 6 insertions(+)
+
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -147,6 +147,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000
+ endif
+ textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
+ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
++textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
+ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
+
+ # Machine directory name. This list is sorted alphanumerically
+--- a/arch/arm/mach-qcom/Kconfig
++++ b/arch/arm/mach-qcom/Kconfig
+@@ -28,4 +28,9 @@ config ARCH_MDM9615
+ bool "Enable support for MDM9615"
+ select CLKSRC_QCOM
+
++config ARCH_IPQ40XX
++ bool "Enable support for IPQ40XX"
++ select CLKSRC_QCOM
++ select HAVE_ARM_ARCH_TIMER
++
+ endif
diff --git a/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch b/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch
new file mode 100644
index 0000000000..ad7ce1673b
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch
@@ -0,0 +1,105 @@
+From 6091a49b0b06bf838fed80498c4f5f40d0fbd447 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sat, 19 Nov 2016 01:22:46 +0100
+Subject: [PATCH] dts: ipq4019: add both IPQ4019 wifi block definitions
+
+The IPQ4019 has two ath10k blocks on the AHB. Both wifi's
+are already supported by ath10k.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 84 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 84 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -384,5 +384,89 @@
+ dr_mode = "host";
+ };
+ };
++
++ wifi0: wifi@a000000 {
++ compatible = "qcom,ipq4019-wifi";
++ reg = <0xa000000 0x200000>;
++ resets = <&gcc WIFI0_CPU_INIT_RESET
++ &gcc WIFI0_RADIO_SRIF_RESET
++ &gcc WIFI0_RADIO_WARM_RESET
++ &gcc WIFI0_RADIO_COLD_RESET
++ &gcc WIFI0_CORE_WARM_RESET
++ &gcc WIFI0_CORE_COLD_RESET>;
++ reset-names = "wifi_cpu_init", "wifi_radio_srif",
++ "wifi_radio_warm", "wifi_radio_cold",
++ "wifi_core_warm", "wifi_core_cold";
++ clocks = <&gcc GCC_WCSS2G_CLK
++ &gcc GCC_WCSS2G_REF_CLK
++ &gcc GCC_WCSS2G_RTC_CLK>;
++ clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
++ "wifi_wcss_rtc";
++ interrupts = <0 32 IRQ_TYPE_EDGE_RISING
++ 0 33 IRQ_TYPE_EDGE_RISING
++ 0 34 IRQ_TYPE_EDGE_RISING
++ 0 35 IRQ_TYPE_EDGE_RISING
++ 0 36 IRQ_TYPE_EDGE_RISING
++ 0 37 IRQ_TYPE_EDGE_RISING
++ 0 38 IRQ_TYPE_EDGE_RISING
++ 0 39 IRQ_TYPE_EDGE_RISING
++ 0 40 IRQ_TYPE_EDGE_RISING
++ 0 41 IRQ_TYPE_EDGE_RISING
++ 0 42 IRQ_TYPE_EDGE_RISING
++ 0 43 IRQ_TYPE_EDGE_RISING
++ 0 44 IRQ_TYPE_EDGE_RISING
++ 0 45 IRQ_TYPE_EDGE_RISING
++ 0 46 IRQ_TYPE_EDGE_RISING
++ 0 47 IRQ_TYPE_EDGE_RISING
++ 0 168 IRQ_TYPE_NONE>;
++ interrupt-names = "msi0", "msi1", "msi2", "msi3",
++ "msi4", "msi5", "msi6", "msi7",
++ "msi8", "msi9", "msi10", "msi11",
++ "msi12", "msi13", "msi14", "msi15",
++ "legacy";
++ status = "disabled";
++ };
++
++ wifi1: wifi@a800000 {
++ compatible = "qcom,ipq4019-wifi";
++ reg = <0xa800000 0x200000>;
++ resets = <&gcc WIFI1_CPU_INIT_RESET
++ &gcc WIFI1_RADIO_SRIF_RESET
++ &gcc WIFI1_RADIO_WARM_RESET
++ &gcc WIFI1_RADIO_COLD_RESET
++ &gcc WIFI1_CORE_WARM_RESET
++ &gcc WIFI1_CORE_COLD_RESET>;
++ reset-names = "wifi_cpu_init", "wifi_radio_srif",
++ "wifi_radio_warm", "wifi_radio_cold",
++ "wifi_core_warm", "wifi_core_cold";
++ clocks = <&gcc GCC_WCSS5G_CLK
++ &gcc GCC_WCSS5G_REF_CLK
++ &gcc GCC_WCSS5G_RTC_CLK>;
++ clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
++ "wifi_wcss_rtc";
++ interrupts = <0 48 IRQ_TYPE_EDGE_RISING
++ 0 49 IRQ_TYPE_EDGE_RISING
++ 0 50 IRQ_TYPE_EDGE_RISING
++ 0 51 IRQ_TYPE_EDGE_RISING
++ 0 52 IRQ_TYPE_EDGE_RISING
++ 0 53 IRQ_TYPE_EDGE_RISING
++ 0 54 IRQ_TYPE_EDGE_RISING
++ 0 55 IRQ_TYPE_EDGE_RISING
++ 0 56 IRQ_TYPE_EDGE_RISING
++ 0 57 IRQ_TYPE_EDGE_RISING
++ 0 58 IRQ_TYPE_EDGE_RISING
++ 0 59 IRQ_TYPE_EDGE_RISING
++ 0 60 IRQ_TYPE_EDGE_RISING
++ 0 61 IRQ_TYPE_EDGE_RISING
++ 0 62 IRQ_TYPE_EDGE_RISING
++ 0 63 IRQ_TYPE_EDGE_RISING
++ 0 169 IRQ_TYPE_NONE>;
++ interrupt-names = "msi0", "msi1", "msi2", "msi3",
++ "msi4", "msi5", "msi6", "msi7",
++ "msi8", "msi9", "msi10", "msi11",
++ "msi12", "msi13", "msi14", "msi15",
++ "legacy";
++ status = "disabled";
++ };
+ };
+ };
diff --git a/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch b/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch
new file mode 100644
index 0000000000..8323ff0fac
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch
@@ -0,0 +1,29 @@
+From 26fa6fdc627b523277c7a79907233596b2f8a3ef Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sat, 19 Nov 2016 03:29:04 +0100
+Subject: [PATCH] dts: ipq4019: add pseudo random number generator
+
+This architecture has a pseudo random number generator
+supported by the existing "qcom,prng" binding.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -277,6 +277,13 @@
+ regulator;
+ };
+
++ rng@22000 {
++ compatible = "qcom,prng";
++ reg = <0x22000 0x140>;
++ clocks = <&gcc GCC_PRNG_AHB_CLK>;
++ clock-names = "core";
++ };
++
+ serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
diff --git a/target/linux/ipq806x/patches-4.9/310-msm-adhoc-bus-support.patch b/target/linux/ipq806x/patches-4.9/310-msm-adhoc-bus-support.patch
new file mode 100644
index 0000000000..ff0e1e0fea
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/310-msm-adhoc-bus-support.patch
@@ -0,0 +1,11026 @@
+From: Christian Lamparter <chunkeey@googlemail.com>
+Subject: BUS: add MSM_BUS
+--- a/drivers/bus/Makefile
++++ b/drivers/bus/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmst
+ obj-$(CONFIG_IMX_WEIM) += imx-weim.o
+ obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
+ obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
++obj-$(CONFIG_BUS_TOPOLOGY_ADHOC)+= msm_bus/
+
+ # Interconnect bus driver for OMAP SoCs.
+ obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
+--- a/drivers/bus/Kconfig
++++ b/drivers/bus/Kconfig
+@@ -92,6 +92,8 @@ config MVEBU_MBUS
+ Driver needed for the MBus configuration on Marvell EBU SoCs
+ (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
+
++source "drivers/bus/msm_bus/Kconfig"
++
+ config OMAP_INTERCONNECT
+ tristate "OMAP INTERCONNECT DRIVER"
+ depends on ARCH_OMAP2PLUS
+--- /dev/null
++++ b/include/dt-bindings/msm/msm-bus-ids.h
+@@ -0,0 +1,869 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __MSM_BUS_IDS_H
++#define __MSM_BUS_IDS_H
++
++/* Topology related enums */
++#define MSM_BUS_FAB_DEFAULT 0
++#define MSM_BUS_FAB_APPSS 0
++#define MSM_BUS_FAB_SYSTEM 1024
++#define MSM_BUS_FAB_MMSS 2048
++#define MSM_BUS_FAB_SYSTEM_FPB 3072
++#define MSM_BUS_FAB_CPSS_FPB 4096
++
++#define MSM_BUS_FAB_BIMC 0
++#define MSM_BUS_FAB_SYS_NOC 1024
++#define MSM_BUS_FAB_MMSS_NOC 2048
++#define MSM_BUS_FAB_OCMEM_NOC 3072
++#define MSM_BUS_FAB_PERIPH_NOC 4096
++#define MSM_BUS_FAB_CONFIG_NOC 5120
++#define MSM_BUS_FAB_OCMEM_VNOC 6144
++#define MSM_BUS_FAB_MMSS_AHB 2049
++#define MSM_BUS_FAB_A0_NOC 6145
++#define MSM_BUS_FAB_A1_NOC 6146
++#define MSM_BUS_FAB_A2_NOC 6147
++
++#define MSM_BUS_MASTER_FIRST 1
++#define MSM_BUS_MASTER_AMPSS_M0 1
++#define MSM_BUS_MASTER_AMPSS_M1 2
++#define MSM_BUS_APPSS_MASTER_FAB_MMSS 3
++#define MSM_BUS_APPSS_MASTER_FAB_SYSTEM 4
++#define MSM_BUS_SYSTEM_MASTER_FAB_APPSS 5
++#define MSM_BUS_MASTER_SPS 6
++#define MSM_BUS_MASTER_ADM_PORT0 7
++#define MSM_BUS_MASTER_ADM_PORT1 8
++#define MSM_BUS_SYSTEM_MASTER_ADM1_PORT0 9
++#define MSM_BUS_MASTER_ADM1_PORT1 10
++#define MSM_BUS_MASTER_LPASS_PROC 11
++#define MSM_BUS_MASTER_MSS_PROCI 12
++#define MSM_BUS_MASTER_MSS_PROCD 13
++#define MSM_BUS_MASTER_MSS_MDM_PORT0 14
++#define MSM_BUS_MASTER_LPASS 15
++#define MSM_BUS_SYSTEM_MASTER_CPSS_FPB 16
++#define MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB 17
++#define MSM_BUS_SYSTEM_MASTER_MMSS_FPB 18
++#define MSM_BUS_MASTER_ADM1_CI 19
++#define MSM_BUS_MASTER_ADM0_CI 20
++#define MSM_BUS_MASTER_MSS_MDM_PORT1 21
++#define MSM_BUS_MASTER_MDP_PORT0 22
++#define MSM_BUS_MASTER_MDP_PORT1 23
++#define MSM_BUS_MMSS_MASTER_ADM1_PORT0 24
++#define MSM_BUS_MASTER_ROTATOR 25
++#define MSM_BUS_MASTER_GRAPHICS_3D 26
++#define MSM_BUS_MASTER_JPEG_DEC 27
++#define MSM_BUS_MASTER_GRAPHICS_2D_CORE0 28
++#define MSM_BUS_MASTER_VFE 29
++#define MSM_BUS_MASTER_VPE 30
++#define MSM_BUS_MASTER_JPEG_ENC 31
++#define MSM_BUS_MASTER_GRAPHICS_2D_CORE1 32
++#define MSM_BUS_MMSS_MASTER_APPS_FAB 33
++#define MSM_BUS_MASTER_HD_CODEC_PORT0 34
++#define MSM_BUS_MASTER_HD_CODEC_PORT1 35
++#define MSM_BUS_MASTER_SPDM 36
++#define MSM_BUS_MASTER_RPM 37
++#define MSM_BUS_MASTER_MSS 38
++#define MSM_BUS_MASTER_RIVA 39
++#define MSM_BUS_MASTER_SNOC_VMEM 40
++#define MSM_BUS_MASTER_MSS_SW_PROC 41
++#define MSM_BUS_MASTER_MSS_FW_PROC 42
++#define MSM_BUS_MASTER_HMSS 43
++#define MSM_BUS_MASTER_GSS_NAV 44
++#define MSM_BUS_MASTER_PCIE 45
++#define MSM_BUS_MASTER_SATA 46
++#define MSM_BUS_MASTER_CRYPTO 47
++#define MSM_BUS_MASTER_VIDEO_CAP 48
++#define MSM_BUS_MASTER_GRAPHICS_3D_PORT1 49
++#define MSM_BUS_MASTER_VIDEO_ENC 50
++#define MSM_BUS_MASTER_VIDEO_DEC 51
++#define MSM_BUS_MASTER_LPASS_AHB 52
++#define MSM_BUS_MASTER_QDSS_BAM 53
++#define MSM_BUS_MASTER_SNOC_CFG 54
++#define MSM_BUS_MASTER_CRYPTO_CORE0 55
++#define MSM_BUS_MASTER_CRYPTO_CORE1 56
++#define MSM_BUS_MASTER_MSS_NAV 57
++#define MSM_BUS_MASTER_OCMEM_DMA 58
++#define MSM_BUS_MASTER_WCSS 59
++#define MSM_BUS_MASTER_QDSS_ETR 60
++#define MSM_BUS_MASTER_USB3 61
++#define MSM_BUS_MASTER_JPEG 62
++#define MSM_BUS_MASTER_VIDEO_P0 63
++#define MSM_BUS_MASTER_VIDEO_P1 64
++#define MSM_BUS_MASTER_MSS_PROC 65
++#define MSM_BUS_MASTER_JPEG_OCMEM 66
++#define MSM_BUS_MASTER_MDP_OCMEM 67
++#define MSM_BUS_MASTER_VIDEO_P0_OCMEM 68
++#define MSM_BUS_MASTER_VIDEO_P1_OCMEM 69
++#define MSM_BUS_MASTER_VFE_OCMEM 70
++#define MSM_BUS_MASTER_CNOC_ONOC_CFG 71
++#define MSM_BUS_MASTER_RPM_INST 72
++#define MSM_BUS_MASTER_RPM_DATA 73
++#define MSM_BUS_MASTER_RPM_SYS 74
++#define MSM_BUS_MASTER_DEHR 75
++#define MSM_BUS_MASTER_QDSS_DAP 76
++#define MSM_BUS_MASTER_TIC 77
++#define MSM_BUS_MASTER_SDCC_1 78
++#define MSM_BUS_MASTER_SDCC_3 79
++#define MSM_BUS_MASTER_SDCC_4 80
++#define MSM_BUS_MASTER_SDCC_2 81
++#define MSM_BUS_MASTER_TSIF 82
++#define MSM_BUS_MASTER_BAM_DMA 83
++#define MSM_BUS_MASTER_BLSP_2 84
++#define MSM_BUS_MASTER_USB_HSIC 85
++#define MSM_BUS_MASTER_BLSP_1 86
++#define MSM_BUS_MASTER_USB_HS 87
++#define MSM_BUS_MASTER_PNOC_CFG 88
++#define MSM_BUS_MASTER_V_OCMEM_GFX3D 89
++#define MSM_BUS_MASTER_IPA 90
++#define MSM_BUS_MASTER_QPIC 91
++#define MSM_BUS_MASTER_MDPE 92
++#define MSM_BUS_MASTER_USB_HS2 93
++#define MSM_BUS_MASTER_VPU 94
++#define MSM_BUS_MASTER_UFS 95
++#define MSM_BUS_MASTER_BCAST 96
++#define MSM_BUS_MASTER_CRYPTO_CORE2 97
++#define MSM_BUS_MASTER_EMAC 98
++#define MSM_BUS_MASTER_VPU_1 99
++#define MSM_BUS_MASTER_PCIE_1 100
++#define MSM_BUS_MASTER_USB3_1 101
++#define MSM_BUS_MASTER_CNOC_MNOC_MMSS_CFG 102
++#define MSM_BUS_MASTER_CNOC_MNOC_CFG 103
++#define MSM_BUS_MASTER_TCU_0 104
++#define MSM_BUS_MASTER_TCU_1 105
++#define MSM_BUS_MASTER_CPP 106
++#define MSM_BUS_MASTER_AUDIO 107
++#define MSM_BUS_MASTER_PCIE_2 108
++#define MSM_BUS_MASTER_BLSP_BAM 109
++#define MSM_BUS_MASTER_USB2_BAM 110
++#define MSM_BUS_MASTER_ADDS_DMA0 111
++#define MSM_BUS_MASTER_ADDS_DMA1 112
++#define MSM_BUS_MASTER_ADDS_DMA2 113
++#define MSM_BUS_MASTER_ADDS_DMA3 114
++#define MSM_BUS_MASTER_QPIC_BAM 115
++#define MSM_BUS_MASTER_SDCC_BAM 116
++#define MSM_BUS_MASTER_DDRC_SNOC 117
++#define MSM_BUS_MASTER_WSS_0 118
++#define MSM_BUS_MASTER_WSS_1 119
++#define MSM_BUS_MASTER_ESS 120
++#define MSM_BUS_MASTER_QDSS_BAMNDP 121
++#define MSM_BUS_MASTER_QDSS_SNOC_CFG 122
++#define MSM_BUS_MASTER_LAST 130
++
++#define MSM_BUS_SYSTEM_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB
++#define MSM_BUS_CPSS_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_CPSS_FPB
++
++#define MSM_BUS_SNOC_MM_INT_0 10000
++#define MSM_BUS_SNOC_MM_INT_1 10001
++#define MSM_BUS_SNOC_MM_INT_2 10002
++#define MSM_BUS_SNOC_MM_INT_BIMC 10003
++#define MSM_BUS_SNOC_INT_0 10004
++#define MSM_BUS_SNOC_INT_1 10005
++#define MSM_BUS_SNOC_INT_BIMC 10006
++#define MSM_BUS_SNOC_BIMC_0_MAS 10007
++#define MSM_BUS_SNOC_BIMC_1_MAS 10008
++#define MSM_BUS_SNOC_QDSS_INT 10009
++#define MSM_BUS_PNOC_SNOC_MAS 10010
++#define MSM_BUS_PNOC_SNOC_SLV 10011
++#define MSM_BUS_PNOC_INT_0 10012
++#define MSM_BUS_PNOC_INT_1 10013
++#define MSM_BUS_PNOC_M_0 10014
++#define MSM_BUS_PNOC_M_1 10015
++#define MSM_BUS_BIMC_SNOC_MAS 10016
++#define MSM_BUS_BIMC_SNOC_SLV 10017
++#define MSM_BUS_PNOC_SLV_0 10018
++#define MSM_BUS_PNOC_SLV_1 10019
++#define MSM_BUS_PNOC_SLV_2 10020
++#define MSM_BUS_PNOC_SLV_3 10021
++#define MSM_BUS_PNOC_SLV_4 10022
++#define MSM_BUS_PNOC_SLV_8 10023
++#define MSM_BUS_PNOC_SLV_9 10024
++#define MSM_BUS_SNOC_BIMC_0_SLV 10025
++#define MSM_BUS_SNOC_BIMC_1_SLV 10026
++#define MSM_BUS_MNOC_BIMC_MAS 10027
++#define MSM_BUS_MNOC_BIMC_SLV 10028
++#define MSM_BUS_BIMC_MNOC_MAS 10029
++#define MSM_BUS_BIMC_MNOC_SLV 10030
++#define MSM_BUS_SNOC_BIMC_MAS 10031
++#define MSM_BUS_SNOC_BIMC_SLV 10032
++#define MSM_BUS_CNOC_SNOC_MAS 10033
++#define MSM_BUS_CNOC_SNOC_SLV 10034
++#define MSM_BUS_SNOC_CNOC_MAS 10035
++#define MSM_BUS_SNOC_CNOC_SLV 10036
++#define MSM_BUS_OVNOC_SNOC_MAS 10037
++#define MSM_BUS_OVNOC_SNOC_SLV 10038
++#define MSM_BUS_SNOC_OVNOC_MAS 10039
++#define MSM_BUS_SNOC_OVNOC_SLV 10040
++#define MSM_BUS_SNOC_PNOC_MAS 10041
++#define MSM_BUS_SNOC_PNOC_SLV 10042
++#define MSM_BUS_BIMC_INT_APPS_EBI 10043
++#define MSM_BUS_BIMC_INT_APPS_SNOC 10044
++#define MSM_BUS_SNOC_BIMC_2_MAS 10045
++#define MSM_BUS_SNOC_BIMC_2_SLV 10046
++#define MSM_BUS_PNOC_SLV_5 10047
++#define MSM_BUS_PNOC_SLV_6 10048
++#define MSM_BUS_PNOC_INT_2 10049
++#define MSM_BUS_PNOC_INT_3 10050
++#define MSM_BUS_PNOC_INT_4 10051
++#define MSM_BUS_PNOC_INT_5 10052
++#define MSM_BUS_PNOC_INT_6 10053
++#define MSM_BUS_PNOC_INT_7 10054
++#define MSM_BUS_BIMC_SNOC_1_MAS 10055
++#define MSM_BUS_BIMC_SNOC_1_SLV 10056
++#define MSM_BUS_PNOC_A1NOC_MAS 10057
++#define MSM_BUS_PNOC_A1NOC_SLV 10058
++#define MSM_BUS_CNOC_A1NOC_MAS 10059
++#define MSM_BUS_A0NOC_SNOC_MAS 10060
++#define MSM_BUS_A0NOC_SNOC_SLV 10061
++#define MSM_BUS_A1NOC_SNOC_SLV 10062
++#define MSM_BUS_A1NOC_SNOC_MAS 10063
++#define MSM_BUS_A2NOC_SNOC_MAS 10064
++#define MSM_BUS_A2NOC_SNOC_SLV 10065
++#define MSM_BUS_PNOC_SLV_7 10066
++#define MSM_BUS_INT_LAST 10067
++
++#define MSM_BUS_SLAVE_FIRST 512
++#define MSM_BUS_SLAVE_EBI_CH0 512
++#define MSM_BUS_SLAVE_EBI_CH1 513
++#define MSM_BUS_SLAVE_AMPSS_L2 514
++#define MSM_BUS_APPSS_SLAVE_FAB_MMSS 515
++#define MSM_BUS_APPSS_SLAVE_FAB_SYSTEM 516
++#define MSM_BUS_SYSTEM_SLAVE_FAB_APPS 517
++#define MSM_BUS_SLAVE_SPS 518
++#define MSM_BUS_SLAVE_SYSTEM_IMEM 519
++#define MSM_BUS_SLAVE_AMPSS 520
++#define MSM_BUS_SLAVE_MSS 521
++#define MSM_BUS_SLAVE_LPASS 522
++#define MSM_BUS_SYSTEM_SLAVE_CPSS_FPB 523
++#define MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB 524
++#define MSM_BUS_SYSTEM_SLAVE_MMSS_FPB 525
++#define MSM_BUS_SLAVE_CORESIGHT 526
++#define MSM_BUS_SLAVE_RIVA 527
++#define MSM_BUS_SLAVE_SMI 528
++#define MSM_BUS_MMSS_SLAVE_FAB_APPS 529
++#define MSM_BUS_MMSS_SLAVE_FAB_APPS_1 530
++#define MSM_BUS_SLAVE_MM_IMEM 531
++#define MSM_BUS_SLAVE_CRYPTO 532
++#define MSM_BUS_SLAVE_SPDM 533
++#define MSM_BUS_SLAVE_RPM 534
++#define MSM_BUS_SLAVE_RPM_MSG_RAM 535
++#define MSM_BUS_SLAVE_MPM 536
++#define MSM_BUS_SLAVE_PMIC1_SSBI1_A 537
++#define MSM_BUS_SLAVE_PMIC1_SSBI1_B 538
++#define MSM_BUS_SLAVE_PMIC1_SSBI1_C 539
++#define MSM_BUS_SLAVE_PMIC2_SSBI2_A 540
++#define MSM_BUS_SLAVE_PMIC2_SSBI2_B 541
++#define MSM_BUS_SLAVE_GSBI1_UART 542
++#define MSM_BUS_SLAVE_GSBI2_UART 543
++#define MSM_BUS_SLAVE_GSBI3_UART 544
++#define MSM_BUS_SLAVE_GSBI4_UART 545
++#define MSM_BUS_SLAVE_GSBI5_UART 546
++#define MSM_BUS_SLAVE_GSBI6_UART 547
++#define MSM_BUS_SLAVE_GSBI7_UART 548
++#define MSM_BUS_SLAVE_GSBI8_UART 549
++#define MSM_BUS_SLAVE_GSBI9_UART 550
++#define MSM_BUS_SLAVE_GSBI10_UART 551
++#define MSM_BUS_SLAVE_GSBI11_UART 552
++#define MSM_BUS_SLAVE_GSBI12_UART 553
++#define MSM_BUS_SLAVE_GSBI1_QUP 554
++#define MSM_BUS_SLAVE_GSBI2_QUP 555
++#define MSM_BUS_SLAVE_GSBI3_QUP 556
++#define MSM_BUS_SLAVE_GSBI4_QUP 557
++#define MSM_BUS_SLAVE_GSBI5_QUP 558
++#define MSM_BUS_SLAVE_GSBI6_QUP 559
++#define MSM_BUS_SLAVE_GSBI7_QUP 560
++#define MSM_BUS_SLAVE_GSBI8_QUP 561
++#define MSM_BUS_SLAVE_GSBI9_QUP 562
++#define MSM_BUS_SLAVE_GSBI10_QUP 563
++#define MSM_BUS_SLAVE_GSBI11_QUP 564
++#define MSM_BUS_SLAVE_GSBI12_QUP 565
++#define MSM_BUS_SLAVE_EBI2_NAND 566
++#define MSM_BUS_SLAVE_EBI2_CS0 567
++#define MSM_BUS_SLAVE_EBI2_CS1 568
++#define MSM_BUS_SLAVE_EBI2_CS2 569
++#define MSM_BUS_SLAVE_EBI2_CS3 570
++#define MSM_BUS_SLAVE_EBI2_CS4 571
++#define MSM_BUS_SLAVE_EBI2_CS5 572
++#define MSM_BUS_SLAVE_USB_FS1 573
++#define MSM_BUS_SLAVE_USB_FS2 574
++#define MSM_BUS_SLAVE_TSIF 575
++#define MSM_BUS_SLAVE_MSM_TSSC 576
++#define MSM_BUS_SLAVE_MSM_PDM 577
++#define MSM_BUS_SLAVE_MSM_DIMEM 578
++#define MSM_BUS_SLAVE_MSM_TCSR 579
++#define MSM_BUS_SLAVE_MSM_PRNG 580
++#define MSM_BUS_SLAVE_GSS 581
++#define MSM_BUS_SLAVE_SATA 582
++#define MSM_BUS_SLAVE_USB3 583
++#define MSM_BUS_SLAVE_WCSS 584
++#define MSM_BUS_SLAVE_OCIMEM 585
++#define MSM_BUS_SLAVE_SNOC_OCMEM 586
++#define MSM_BUS_SLAVE_SERVICE_SNOC 587
++#define MSM_BUS_SLAVE_QDSS_STM 588
++#define MSM_BUS_SLAVE_CAMERA_CFG 589
++#define MSM_BUS_SLAVE_DISPLAY_CFG 590
++#define MSM_BUS_SLAVE_OCMEM_CFG 591
++#define MSM_BUS_SLAVE_CPR_CFG 592
++#define MSM_BUS_SLAVE_CPR_XPU_CFG 593
++#define MSM_BUS_SLAVE_MISC_CFG 594
++#define MSM_BUS_SLAVE_MISC_XPU_CFG 595
++#define MSM_BUS_SLAVE_VENUS_CFG 596
++#define MSM_BUS_SLAVE_MISC_VENUS_CFG 597
++#define MSM_BUS_SLAVE_GRAPHICS_3D_CFG 598
++#define MSM_BUS_SLAVE_MMSS_CLK_CFG 599
++#define MSM_BUS_SLAVE_MMSS_CLK_XPU_CFG 600
++#define MSM_BUS_SLAVE_MNOC_MPU_CFG 601
++#define MSM_BUS_SLAVE_ONOC_MPU_CFG 602
++#define MSM_BUS_SLAVE_SERVICE_MNOC 603
++#define MSM_BUS_SLAVE_OCMEM 604
++#define MSM_BUS_SLAVE_SERVICE_ONOC 605
++#define MSM_BUS_SLAVE_SDCC_1 606
++#define MSM_BUS_SLAVE_SDCC_3 607
++#define MSM_BUS_SLAVE_SDCC_2 608
++#define MSM_BUS_SLAVE_SDCC_4 609
++#define MSM_BUS_SLAVE_BAM_DMA 610
++#define MSM_BUS_SLAVE_BLSP_2 611
++#define MSM_BUS_SLAVE_USB_HSIC 612
++#define MSM_BUS_SLAVE_BLSP_1 613
++#define MSM_BUS_SLAVE_USB_HS 614
++#define MSM_BUS_SLAVE_PDM 615
++#define MSM_BUS_SLAVE_PERIPH_APU_CFG 616
++#define MSM_BUS_SLAVE_PNOC_MPU_CFG 617
++#define MSM_BUS_SLAVE_PRNG 618
++#define MSM_BUS_SLAVE_SERVICE_PNOC 619
++#define MSM_BUS_SLAVE_CLK_CTL 620
++#define MSM_BUS_SLAVE_CNOC_MSS 621
++#define MSM_BUS_SLAVE_SECURITY 622
++#define MSM_BUS_SLAVE_TCSR 623
++#define MSM_BUS_SLAVE_TLMM 624
++#define MSM_BUS_SLAVE_CRYPTO_0_CFG 625
++#define MSM_BUS_SLAVE_CRYPTO_1_CFG 626
++#define MSM_BUS_SLAVE_IMEM_CFG 627
++#define MSM_BUS_SLAVE_MESSAGE_RAM 628
++#define MSM_BUS_SLAVE_BIMC_CFG 629
++#define MSM_BUS_SLAVE_BOOT_ROM 630
++#define MSM_BUS_SLAVE_CNOC_MNOC_MMSS_CFG 631
++#define MSM_BUS_SLAVE_PMIC_ARB 632
++#define MSM_BUS_SLAVE_SPDM_WRAPPER 633
++#define MSM_BUS_SLAVE_DEHR_CFG 634
++#define MSM_BUS_SLAVE_QDSS_CFG 635
++#define MSM_BUS_SLAVE_RBCPR_CFG 636
++#define MSM_BUS_SLAVE_RBCPR_QDSS_APU_CFG 637
++#define MSM_BUS_SLAVE_SNOC_MPU_CFG 638
++#define MSM_BUS_SLAVE_CNOC_ONOC_CFG 639
++#define MSM_BUS_SLAVE_CNOC_MNOC_CFG 640
++#define MSM_BUS_SLAVE_PNOC_CFG 641
++#define MSM_BUS_SLAVE_SNOC_CFG 642
++#define MSM_BUS_SLAVE_EBI1_DLL_CFG 643
++#define MSM_BUS_SLAVE_PHY_APU_CFG 644
++#define MSM_BUS_SLAVE_EBI1_PHY_CFG 645
++#define MSM_BUS_SLAVE_SERVICE_CNOC 646
++#define MSM_BUS_SLAVE_IPS_CFG 647
++#define MSM_BUS_SLAVE_QPIC 648
++#define MSM_BUS_SLAVE_DSI_CFG 649
++#define MSM_BUS_SLAVE_UFS_CFG 650
++#define MSM_BUS_SLAVE_RBCPR_CX_CFG 651
++#define MSM_BUS_SLAVE_RBCPR_MX_CFG 652
++#define MSM_BUS_SLAVE_PCIE_CFG 653
++#define MSM_BUS_SLAVE_USB_PHYS_CFG 654
++#define MSM_BUS_SLAVE_VIDEO_CAP_CFG 655
++#define MSM_BUS_SLAVE_AVSYNC_CFG 656
++#define MSM_BUS_SLAVE_CRYPTO_2_CFG 657
++#define MSM_BUS_SLAVE_VPU_CFG 658
++#define MSM_BUS_SLAVE_BCAST_CFG 659
++#define MSM_BUS_SLAVE_KLM_CFG 660
++#define MSM_BUS_SLAVE_GENI_IR_CFG 661
++#define MSM_BUS_SLAVE_OCMEM_GFX 662
++#define MSM_BUS_SLAVE_CATS_128 663
++#define MSM_BUS_SLAVE_OCMEM_64 664
++#define MSM_BUS_SLAVE_PCIE_0 665
++#define MSM_BUS_SLAVE_PCIE_1 666
++#define MSM_BUS_SLAVE_PCIE_0_CFG 667
++#define MSM_BUS_SLAVE_PCIE_1_CFG 668
++#define MSM_BUS_SLAVE_SRVC_MNOC 669
++#define MSM_BUS_SLAVE_USB_HS2 670
++#define MSM_BUS_SLAVE_AUDIO 671
++#define MSM_BUS_SLAVE_TCU 672
++#define MSM_BUS_SLAVE_APPSS 673
++#define MSM_BUS_SLAVE_PCIE_PARF 674
++#define MSM_BUS_SLAVE_USB3_PHY_CFG 675
++#define MSM_BUS_SLAVE_IPA_CFG 676
++#define MSM_BUS_SLAVE_A0NOC_SNOC 677
++#define MSM_BUS_SLAVE_A1NOC_SNOC 678
++#define MSM_BUS_SLAVE_A2NOC_SNOC 679
++#define MSM_BUS_SLAVE_HMSS_L3 680
++#define MSM_BUS_SLAVE_PIMEM_CFG 681
++#define MSM_BUS_SLAVE_DCC_CFG 682
++#define MSM_BUS_SLAVE_QDSS_RBCPR_APU_CFG 683
++#define MSM_BUS_SLAVE_PCIE_2_CFG 684
++#define MSM_BUS_SLAVE_PCIE20_AHB2PHY 685
++#define MSM_BUS_SLAVE_A0NOC_CFG 686
++#define MSM_BUS_SLAVE_A1NOC_CFG 687
++#define MSM_BUS_SLAVE_A2NOC_CFG 688
++#define MSM_BUS_SLAVE_A1NOC_MPU_CFG 689
++#define MSM_BUS_SLAVE_A2NOC_MPU_CFG 690
++#define MSM_BUS_SLAVE_A0NOC_SMMU_CFG 691
++#define MSM_BUS_SLAVE_A1NOC_SMMU_CFG 692
++#define MSM_BUS_SLAVE_A2NOC_SMMU_CFG 693
++#define MSM_BUS_SLAVE_LPASS_SMMU_CFG 694
++#define MSM_BUS_SLAVE_MMAGIC_CFG 695
++#define MSM_BUS_SLAVE_VENUS_THROTTLE_CFG 696
++#define MSM_BUS_SLAVE_SSC_CFG 697
++#define MSM_BUS_SLAVE_DSA_CFG 698
++#define MSM_BUS_SLAVE_DSA_MPU_CFG 699
++#define MSM_BUS_SLAVE_DISPLAY_THROTTLE_CFG 700
++#define MSM_BUS_SLAVE_SMMU_CPP_CFG 701
++#define MSM_BUS_SLAVE_SMMU_JPEG_CFG 702
++#define MSM_BUS_SLAVE_SMMU_MDP_CFG 703
++#define MSM_BUS_SLAVE_SMMU_ROTATOR_CFG 704
++#define MSM_BUS_SLAVE_SMMU_VENUS_CFG 705
++#define MSM_BUS_SLAVE_SMMU_VFE_CFG 706
++#define MSM_BUS_SLAVE_A0NOC_MPU_CFG 707
++#define MSM_BUS_SLAVE_VMEM_CFG 708
++#define MSM_BUS_SLAVE_CAMERA_THROTTLE_CFG 700
++#define MSM_BUS_SLAVE_VMEM 709
++#define MSM_BUS_SLAVE_AHB2PHY 710
++#define MSM_BUS_SLAVE_PIMEM 711
++#define MSM_BUS_SLAVE_SNOC_VMEM 712
++#define MSM_BUS_SLAVE_PCIE_2 713
++#define MSM_BUS_SLAVE_RBCPR_MX 714
++#define MSM_BUS_SLAVE_RBCPR_CX 715
++#define MSM_BUS_SLAVE_PRNG_APU_CFG 716
++#define MSM_BUS_SLAVE_PERIPH_MPU_CFG 717
++#define MSM_BUS_SLAVE_GCNT 718
++#define MSM_BUS_SLAVE_ADSS_CFG 719
++#define MSM_BUS_SLAVE_ADSS_VMIDMT_CFG 720
++#define MSM_BUS_SLAVE_QHSS_APU_CFG 721
++#define MSM_BUS_SLAVE_MDIO 722
++#define MSM_BUS_SLAVE_FEPHY_CFG 723
++#define MSM_BUS_SLAVE_SRIF 724
++#define MSM_BUS_SLAVE_LAST 730
++#define MSM_BUS_SLAVE_DDRC_CFG 731
++#define MSM_BUS_SLAVE_DDRC_APU_CFG 732
++#define MSM_BUS_SLAVE_MPU0_CFG 733
++#define MSM_BUS_SLAVE_MPU1_CFG 734
++#define MSM_BUS_SLAVE_MPU2_CFG 734
++#define MSM_BUS_SLAVE_ESS_VMIDMT_CFG 735
++#define MSM_BUS_SLAVE_ESS_APU_CFG 736
++#define MSM_BUS_SLAVE_USB2_CFG 737
++#define MSM_BUS_SLAVE_BLSP_CFG 738
++#define MSM_BUS_SLAVE_QPIC_CFG 739
++#define MSM_BUS_SLAVE_SDCC_CFG 740
++#define MSM_BUS_SLAVE_WSS0_VMIDMT_CFG 741
++#define MSM_BUS_SLAVE_WSS0_APU_CFG 742
++#define MSM_BUS_SLAVE_WSS1_VMIDMT_CFG 743
++#define MSM_BUS_SLAVE_WSS1_APU_CFG 744
++#define MSM_BUS_SLAVE_SRVC_PCNOC 745
++#define MSM_BUS_SLAVE_SNOC_DDRC 746
++#define MSM_BUS_SLAVE_A7SS 747
++#define MSM_BUS_SLAVE_WSS0_CFG 748
++#define MSM_BUS_SLAVE_WSS1_CFG 749
++#define MSM_BUS_SLAVE_PCIE 750
++#define MSM_BUS_SLAVE_USB3_CFG 751
++#define MSM_BUS_SLAVE_CRYPTO_CFG 752
++#define MSM_BUS_SLAVE_ESS_CFG 753
++#define MSM_BUS_SLAVE_SRVC_SNOC 754
++
++#define MSM_BUS_SYSTEM_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB
++#define MSM_BUS_CPSS_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_CPSS_FPB
++
++/*
++ * ID's used in RPM messages
++ */
++#define ICBID_MASTER_APPSS_PROC 0
++#define ICBID_MASTER_MSS_PROC 1
++#define ICBID_MASTER_MNOC_BIMC 2
++#define ICBID_MASTER_SNOC_BIMC 3
++#define ICBID_MASTER_SNOC_BIMC_0 ICBID_MASTER_SNOC_BIMC
++#define ICBID_MASTER_CNOC_MNOC_MMSS_CFG 4
++#define ICBID_MASTER_CNOC_MNOC_CFG 5
++#define ICBID_MASTER_GFX3D 6
++#define ICBID_MASTER_JPEG 7
++#define ICBID_MASTER_MDP 8
++#define ICBID_MASTER_MDP0 ICBID_MASTER_MDP
++#define ICBID_MASTER_MDPS ICBID_MASTER_MDP
++#define ICBID_MASTER_VIDEO 9
++#define ICBID_MASTER_VIDEO_P0 ICBID_MASTER_VIDEO
++#define ICBID_MASTER_VIDEO_P1 10
++#define ICBID_MASTER_VFE 11
++#define ICBID_MASTER_CNOC_ONOC_CFG 12
++#define ICBID_MASTER_JPEG_OCMEM 13
++#define ICBID_MASTER_MDP_OCMEM 14
++#define ICBID_MASTER_VIDEO_P0_OCMEM 15
++#define ICBID_MASTER_VIDEO_P1_OCMEM 16
++#define ICBID_MASTER_VFE_OCMEM 17
++#define ICBID_MASTER_LPASS_AHB 18
++#define ICBID_MASTER_QDSS_BAM 19
++#define ICBID_MASTER_SNOC_CFG 20
++#define ICBID_MASTER_BIMC_SNOC 21
++#define ICBID_MASTER_CNOC_SNOC 22
++#define ICBID_MASTER_CRYPTO 23
++#define ICBID_MASTER_CRYPTO_CORE0 ICBID_MASTER_CRYPTO
++#define ICBID_MASTER_CRYPTO_CORE1 24
++#define ICBID_MASTER_LPASS_PROC 25
++#define ICBID_MASTER_MSS 26
++#define ICBID_MASTER_MSS_NAV 27
++#define ICBID_MASTER_OCMEM_DMA 28
++#define ICBID_MASTER_PNOC_SNOC 29
++#define ICBID_MASTER_WCSS 30
++#define ICBID_MASTER_QDSS_ETR 31
++#define ICBID_MASTER_USB3 32
++#define ICBID_MASTER_USB3_0 ICBID_MASTER_USB3
++#define ICBID_MASTER_SDCC_1 33
++#define ICBID_MASTER_SDCC_3 34
++#define ICBID_MASTER_SDCC_2 35
++#define ICBID_MASTER_SDCC_4 36
++#define ICBID_MASTER_TSIF 37
++#define ICBID_MASTER_BAM_DMA 38
++#define ICBID_MASTER_BLSP_2 39
++#define ICBID_MASTER_USB_HSIC 40
++#define ICBID_MASTER_BLSP_1 41
++#define ICBID_MASTER_USB_HS 42
++#define ICBID_MASTER_USB_HS1 ICBID_MASTER_USB_HS
++#define ICBID_MASTER_PNOC_CFG 43
++#define ICBID_MASTER_SNOC_PNOC 44
++#define ICBID_MASTER_RPM_INST 45
++#define ICBID_MASTER_RPM_DATA 46
++#define ICBID_MASTER_RPM_SYS 47
++#define ICBID_MASTER_DEHR 48
++#define ICBID_MASTER_QDSS_DAP 49
++#define ICBID_MASTER_SPDM 50
++#define ICBID_MASTER_TIC 51
++#define ICBID_MASTER_SNOC_CNOC 52
++#define ICBID_MASTER_GFX3D_OCMEM 53
++#define ICBID_MASTER_GFX3D_GMEM ICBID_MASTER_GFX3D_OCMEM
++#define ICBID_MASTER_OVIRT_SNOC 54
++#define ICBID_MASTER_SNOC_OVIRT 55
++#define ICBID_MASTER_SNOC_GVIRT ICBID_MASTER_SNOC_OVIRT
++#define ICBID_MASTER_ONOC_OVIRT 56
++#define ICBID_MASTER_USB_HS2 57
++#define ICBID_MASTER_QPIC 58
++#define ICBID_MASTER_IPA 59
++#define ICBID_MASTER_DSI 60
++#define ICBID_MASTER_MDP1 61
++#define ICBID_MASTER_MDPE ICBID_MASTER_MDP1
++#define ICBID_MASTER_VPU_PROC 62
++#define ICBID_MASTER_VPU 63
++#define ICBID_MASTER_VPU0 ICBID_MASTER_VPU
++#define ICBID_MASTER_CRYPTO_CORE2 64
++#define ICBID_MASTER_PCIE_0 65
++#define ICBID_MASTER_PCIE_1 66
++#define ICBID_MASTER_SATA 67
++#define ICBID_MASTER_UFS 68
++#define ICBID_MASTER_USB3_1 69
++#define ICBID_MASTER_VIDEO_OCMEM 70
++#define ICBID_MASTER_VPU1 71
++#define ICBID_MASTER_VCAP 72
++#define ICBID_MASTER_EMAC 73
++#define ICBID_MASTER_BCAST 74
++#define ICBID_MASTER_MMSS_PROC 75
++#define ICBID_MASTER_SNOC_BIMC_1 76
++#define ICBID_MASTER_SNOC_PCNOC 77
++#define ICBID_MASTER_AUDIO 78
++#define ICBID_MASTER_MM_INT_0 79
++#define ICBID_MASTER_MM_INT_1 80
++#define ICBID_MASTER_MM_INT_2 81
++#define ICBID_MASTER_MM_INT_BIMC 82
++#define ICBID_MASTER_MSS_INT 83
++#define ICBID_MASTER_PCNOC_CFG 84
++#define ICBID_MASTER_PCNOC_INT_0 85
++#define ICBID_MASTER_PCNOC_INT_1 86
++#define ICBID_MASTER_PCNOC_M_0 87
++#define ICBID_MASTER_PCNOC_M_1 88
++#define ICBID_MASTER_PCNOC_S_0 89
++#define ICBID_MASTER_PCNOC_S_1 90
++#define ICBID_MASTER_PCNOC_S_2 91
++#define ICBID_MASTER_PCNOC_S_3 92
++#define ICBID_MASTER_PCNOC_S_4 93
++#define ICBID_MASTER_PCNOC_S_6 94
++#define ICBID_MASTER_PCNOC_S_7 95
++#define ICBID_MASTER_PCNOC_S_8 96
++#define ICBID_MASTER_PCNOC_S_9 97
++#define ICBID_MASTER_QDSS_INT 98
++#define ICBID_MASTER_SNOC_INT_0 99
++#define ICBID_MASTER_SNOC_INT_1 100
++#define ICBID_MASTER_SNOC_INT_BIMC 101
++#define ICBID_MASTER_TCU_0 102
++#define ICBID_MASTER_TCU_1 103
++#define ICBID_MASTER_BIMC_INT_0 104
++#define ICBID_MASTER_BIMC_INT_1 105
++#define ICBID_MASTER_CAMERA 106
++#define ICBID_MASTER_RICA 107
++#define ICBID_MASTER_PCNOC_S_5 129
++#define ICBID_MASTER_PCNOC_INT_2 124
++#define ICBID_MASTER_PCNOC_INT_3 125
++#define ICBID_MASTER_PCNOC_INT_4 126
++#define ICBID_MASTER_PCNOC_INT_5 127
++#define ICBID_MASTER_PCNOC_INT_6 128
++#define ICBID_MASTER_PCIE_2 119
++#define ICBID_MASTER_MASTER_CNOC_A1NOC 116
++#define ICBID_MASTER_A0NOC_SNOC 110
++#define ICBID_MASTER_A1NOC_SNOC 111
++#define ICBID_MASTER_A2NOC_SNOC 112
++#define ICBID_MASTER_PNOC_A1NOC 117
++#define ICBID_MASTER_ROTATOR 120
++#define ICBID_MASTER_SNOC_VMEM 114
++#define ICBID_MASTER_VENUS_VMEM 121
++#define ICBID_MASTER_HMSS 118
++#define ICBID_MASTER_BIMC_SNOC_1 109
++#define ICBID_MASTER_CNOC_A1NOC 116
++#define ICBID_MASTER_CPP 115
++#define ICBID_MASTER_BLSP_BAM 130
++#define ICBID_MASTER_USB2_BAM 131
++#define ICBID_MASTER_ADSS_DMA0 132
++#define ICBID_MASTER_ADSS_DMA1 133
++#define ICBID_MASTER_ADSS_DMA2 134
++#define ICBID_MASTER_ADSS_DMA3 135
++#define ICBID_MASTER_QPIC_BAM 136
++#define ICBID_MASTER_SDCC_BAM 137
++#define ICBID_MASTER_DDRC_SNOC 138
++#define ICBID_MASTER_WSS_0 139
++#define ICBID_MASTER_WSS_1 140
++#define ICBID_MASTER_ESS 141
++#define ICBID_MASTER_PCIE 142
++#define ICBID_MASTER_QDSS_BAMNDP 143
++#define ICBID_MASTER_QDSS_SNOC_CFG 144
++
++#define ICBID_SLAVE_EBI1 0
++#define ICBID_SLAVE_APPSS_L2 1
++#define ICBID_SLAVE_BIMC_SNOC 2
++#define ICBID_SLAVE_CAMERA_CFG 3
++#define ICBID_SLAVE_DISPLAY_CFG 4
++#define ICBID_SLAVE_OCMEM_CFG 5
++#define ICBID_SLAVE_CPR_CFG 6
++#define ICBID_SLAVE_CPR_XPU_CFG 7
++#define ICBID_SLAVE_MISC_CFG 8
++#define ICBID_SLAVE_MISC_XPU_CFG 9
++#define ICBID_SLAVE_VENUS_CFG 10
++#define ICBID_SLAVE_GFX3D_CFG 11
++#define ICBID_SLAVE_MMSS_CLK_CFG 12
++#define ICBID_SLAVE_MMSS_CLK_XPU_CFG 13
++#define ICBID_SLAVE_MNOC_MPU_CFG 14
++#define ICBID_SLAVE_ONOC_MPU_CFG 15
++#define ICBID_SLAVE_MNOC_BIMC 16
++#define ICBID_SLAVE_SERVICE_MNOC 17
++#define ICBID_SLAVE_OCMEM 18
++#define ICBID_SLAVE_GMEM ICBID_SLAVE_OCMEM
++#define ICBID_SLAVE_SERVICE_ONOC 19
++#define ICBID_SLAVE_APPSS 20
++#define ICBID_SLAVE_LPASS 21
++#define ICBID_SLAVE_USB3 22
++#define ICBID_SLAVE_USB3_0 ICBID_SLAVE_USB3
++#define ICBID_SLAVE_WCSS 23
++#define ICBID_SLAVE_SNOC_BIMC 24
++#define ICBID_SLAVE_SNOC_BIMC_0 ICBID_SLAVE_SNOC_BIMC
++#define ICBID_SLAVE_SNOC_CNOC 25
++#define ICBID_SLAVE_IMEM 26
++#define ICBID_SLAVE_OCIMEM ICBID_SLAVE_IMEM
++#define ICBID_SLAVE_SNOC_OVIRT 27
++#define ICBID_SLAVE_SNOC_GVIRT ICBID_SLAVE_SNOC_OVIRT
++#define ICBID_SLAVE_SNOC_PNOC 28
++#define ICBID_SLAVE_SNOC_PCNOC ICBID_SLAVE_SNOC_PNOC
++#define ICBID_SLAVE_SERVICE_SNOC 29
++#define ICBID_SLAVE_QDSS_STM 30
++#define ICBID_SLAVE_SDCC_1 31
++#define ICBID_SLAVE_SDCC_3 32
++#define ICBID_SLAVE_SDCC_2 33
++#define ICBID_SLAVE_SDCC_4 34
++#define ICBID_SLAVE_TSIF 35
++#define ICBID_SLAVE_BAM_DMA 36
++#define ICBID_SLAVE_BLSP_2 37
++#define ICBID_SLAVE_USB_HSIC 38
++#define ICBID_SLAVE_BLSP_1 39
++#define ICBID_SLAVE_USB_HS 40
++#define ICBID_SLAVE_USB_HS1 ICBID_SLAVE_USB_HS
++#define ICBID_SLAVE_PDM 41
++#define ICBID_SLAVE_PERIPH_APU_CFG 42
++#define ICBID_SLAVE_PNOC_MPU_CFG 43
++#define ICBID_SLAVE_PRNG 44
++#define ICBID_SLAVE_PNOC_SNOC 45
++#define ICBID_SLAVE_PCNOC_SNOC ICBID_SLAVE_PNOC_SNOC
++#define ICBID_SLAVE_SERVICE_PNOC 46
++#define ICBID_SLAVE_CLK_CTL 47
++#define ICBID_SLAVE_CNOC_MSS 48
++#define ICBID_SLAVE_PCNOC_MSS ICBID_SLAVE_CNOC_MSS
++#define ICBID_SLAVE_SECURITY 49
++#define ICBID_SLAVE_TCSR 50
++#define ICBID_SLAVE_TLMM 51
++#define ICBID_SLAVE_CRYPTO_0_CFG 52
++#define ICBID_SLAVE_CRYPTO_1_CFG 53
++#define ICBID_SLAVE_IMEM_CFG 54
++#define ICBID_SLAVE_MESSAGE_RAM 55
++#define ICBID_SLAVE_BIMC_CFG 56
++#define ICBID_SLAVE_BOOT_ROM 57
++#define ICBID_SLAVE_CNOC_MNOC_MMSS_CFG 58
++#define ICBID_SLAVE_PMIC_ARB 59
++#define ICBID_SLAVE_SPDM_WRAPPER 60
++#define ICBID_SLAVE_DEHR_CFG 61
++#define ICBID_SLAVE_MPM 62
++#define ICBID_SLAVE_QDSS_CFG 63
++#define ICBID_SLAVE_RBCPR_CFG 64
++#define ICBID_SLAVE_RBCPR_CX_CFG ICBID_SLAVE_RBCPR_CFG
++#define ICBID_SLAVE_RBCPR_QDSS_APU_CFG 65
++#define ICBID_SLAVE_CNOC_MNOC_CFG 66
++#define ICBID_SLAVE_SNOC_MPU_CFG 67
++#define ICBID_SLAVE_CNOC_ONOC_CFG 68
++#define ICBID_SLAVE_PNOC_CFG 69
++#define ICBID_SLAVE_SNOC_CFG 70
++#define ICBID_SLAVE_EBI1_DLL_CFG 71
++#define ICBID_SLAVE_PHY_APU_CFG 72
++#define ICBID_SLAVE_EBI1_PHY_CFG 73
++#define ICBID_SLAVE_RPM 74
++#define ICBID_SLAVE_CNOC_SNOC 75
++#define ICBID_SLAVE_SERVICE_CNOC 76
++#define ICBID_SLAVE_OVIRT_SNOC 77
++#define ICBID_SLAVE_OVIRT_OCMEM 78
++#define ICBID_SLAVE_USB_HS2 79
++#define ICBID_SLAVE_QPIC 80
++#define ICBID_SLAVE_IPS_CFG 81
++#define ICBID_SLAVE_DSI_CFG 82
++#define ICBID_SLAVE_USB3_1 83
++#define ICBID_SLAVE_PCIE_0 84
++#define ICBID_SLAVE_PCIE_1 85
++#define ICBID_SLAVE_PSS_SMMU_CFG 86
++#define ICBID_SLAVE_CRYPTO_2_CFG 87
++#define ICBID_SLAVE_PCIE_0_CFG 88
++#define ICBID_SLAVE_PCIE_1_CFG 89
++#define ICBID_SLAVE_SATA_CFG 90
++#define ICBID_SLAVE_SPSS_GENI_IR 91
++#define ICBID_SLAVE_UFS_CFG 92
++#define ICBID_SLAVE_AVSYNC_CFG 93
++#define ICBID_SLAVE_VPU_CFG 94
++#define ICBID_SLAVE_USB_PHY_CFG 95
++#define ICBID_SLAVE_RBCPR_MX_CFG 96
++#define ICBID_SLAVE_PCIE_PARF 97
++#define ICBID_SLAVE_VCAP_CFG 98
++#define ICBID_SLAVE_EMAC_CFG 99
++#define ICBID_SLAVE_BCAST_CFG 100
++#define ICBID_SLAVE_KLM_CFG 101
++#define ICBID_SLAVE_DISPLAY_PWM 102
++#define ICBID_SLAVE_GENI 103
++#define ICBID_SLAVE_SNOC_BIMC_1 104
++#define ICBID_SLAVE_AUDIO 105
++#define ICBID_SLAVE_CATS_0 106
++#define ICBID_SLAVE_CATS_1 107
++#define ICBID_SLAVE_MM_INT_0 108
++#define ICBID_SLAVE_MM_INT_1 109
++#define ICBID_SLAVE_MM_INT_2 110
++#define ICBID_SLAVE_MM_INT_BIMC 111
++#define ICBID_SLAVE_MMU_MODEM_XPU_CFG 112
++#define ICBID_SLAVE_MSS_INT 113
++#define ICBID_SLAVE_PCNOC_INT_0 114
++#define ICBID_SLAVE_PCNOC_INT_1 115
++#define ICBID_SLAVE_PCNOC_M_0 116
++#define ICBID_SLAVE_PCNOC_M_1 117
++#define ICBID_SLAVE_PCNOC_S_0 118
++#define ICBID_SLAVE_PCNOC_S_1 119
++#define ICBID_SLAVE_PCNOC_S_2 120
++#define ICBID_SLAVE_PCNOC_S_3 121
++#define ICBID_SLAVE_PCNOC_S_4 122
++#define ICBID_SLAVE_PCNOC_S_6 123
++#define ICBID_SLAVE_PCNOC_S_7 124
++#define ICBID_SLAVE_PCNOC_S_8 125
++#define ICBID_SLAVE_PCNOC_S_9 126
++#define ICBID_SLAVE_PRNG_XPU_CFG 127
++#define ICBID_SLAVE_QDSS_INT 128
++#define ICBID_SLAVE_RPM_XPU_CFG 129
++#define ICBID_SLAVE_SNOC_INT_0 130
++#define ICBID_SLAVE_SNOC_INT_1 131
++#define ICBID_SLAVE_SNOC_INT_BIMC 132
++#define ICBID_SLAVE_TCU 133
++#define ICBID_SLAVE_BIMC_INT_0 134
++#define ICBID_SLAVE_BIMC_INT_1 135
++#define ICBID_SLAVE_RICA_CFG 136
++#define ICBID_SLAVE_PCNOC_S_5 189
++#define ICBID_SLAVE_PCNOC_S_7 124
++#define ICBID_SLAVE_PCNOC_INT_2 184
++#define ICBID_SLAVE_PCNOC_INT_3 185
++#define ICBID_SLAVE_PCNOC_INT_4 186
++#define ICBID_SLAVE_PCNOC_INT_5 187
++#define ICBID_SLAVE_PCNOC_INT_6 188
++#define ICBID_SLAVE_USB3_PHY_CFG 182
++#define ICBID_SLAVE_IPA_CFG 183
++
++#define ICBID_SLAVE_A0NOC_SNOC 141
++#define ICBID_SLAVE_A1NOC_SNOC 142
++#define ICBID_SLAVE_A2NOC_SNOC 143
++#define ICBID_SLAVE_BIMC_SNOC_1 138
++#define ICBID_SLAVE_PIMEM 167
++#define ICBID_SLAVE_PIMEM_CFG 168
++#define ICBID_SLAVE_DCC_CFG 155
++#define ICBID_SLAVE_QDSS_RBCPR_APU_CFG 168
++#define ICBID_SLAVE_A0NOC_CFG 144
++#define ICBID_SLAVE_PCIE_2_CFG 165
++#define ICBID_SLAVE_PCIE20_AHB2PHY 163
++#define ICBID_SLAVE_PCIE_2 164
++#define ICBID_SLAVE_A1NOC_CFG 147
++#define ICBID_SLAVE_A1NOC_MPU_CFG 148
++#define ICBID_SLAVE_A1NOC_SMMU_CFG 149
++#define ICBID_SLAVE_A2NOC_CFG 150
++#define ICBID_SLAVE_A2NOC_MPU_CFG 151
++#define ICBID_SLAVE_A2NOC_SMMU_CFG 152
++#define ICBID_SLAVE_AHB2PHY 153
++#define ICBID_SLAVE_HMSS_L3 161
++#define ICBID_SLAVE_LPASS_SMMU_CFG 161
++#define ICBID_SLAVE_MMAGIC_CFG 162
++#define ICBID_SLAVE_SSC_CFG 177
++#define ICBID_SLAVE_VENUS_THROTTLE_CFG 178
++#define ICBID_SLAVE_DISPLAY_THROTTLE_CFG 156
++#define ICBID_SLAVE_CAMERA_THROTTLE_CFG 154
++#define ICBID_SLAVE_DSA_CFG 157
++#define ICBID_SLAVE_DSA_MPU_CFG 158
++#define ICBID_SLAVE_SMMU_CPP_CFG 171
++#define ICBID_SLAVE_SMMU_JPEG_CFG 172
++#define ICBID_SLAVE_SMMU_MDP_CFG 173
++#define ICBID_SLAVE_SMMU_ROTATOR_CFG 174
++#define ICBID_SLAVE_SMMU_VENUS_CFG 175
++#define ICBID_SLAVE_SMMU_VFE_CFG 176
++#define ICBID_SLAVE_A0NOC_MPU_CFG 145
++#define ICBID_SLAVE_A0NOC_SMMU_CFG 146
++#define ICBID_SLAVE_VMEM_CFG 180
++#define ICBID_SLAVE_VMEM 179
++#define ICBID_SLAVE_PNOC_A1NOC 139
++#define ICBID_SLAVE_SNOC_VMEM 140
++#define ICBID_SLAVE_RBCPR_MX 170
++#define ICBID_SLAVE_RBCPR_CX 169
++#define ICBID_SLAVE_PRNG_APU_CFG 190
++#define ICBID_SLAVE_PERIPH_MPU_CFG 191
++#define ICBID_SLAVE_GCNT 192
++#define ICBID_SLAVE_ADSS_CFG 193
++#define ICBID_SLAVE_ADSS_APU 194
++#define ICBID_SLAVE_ADSS_VMIDMT_CFG 195
++#define ICBID_SLAVE_QHSS_APU_CFG 196
++#define ICBID_SLAVE_MDIO 197
++#define ICBID_SLAVE_FEPHY_CFG 198
++#define ICBID_SLAVE_SRIF 199
++#define ICBID_SLAVE_DDRC_CFG 200
++#define ICBID_SLAVE_DDRC_APU_CFG 201
++#define ICBID_SLAVE_DDRC_MPU0_CFG 202
++#define ICBID_SLAVE_DDRC_MPU1_CFG 203
++#define ICBID_SLAVE_DDRC_MPU2_CFG 210
++#define ICBID_SLAVE_ESS_VMIDMT_CFG 211
++#define ICBID_SLAVE_ESS_APU_CFG 212
++#define ICBID_SLAVE_USB2_CFG 213
++#define ICBID_SLAVE_BLSP_CFG 214
++#define ICBID_SLAVE_QPIC_CFG 215
++#define ICBID_SLAVE_SDCC_CFG 216
++#define ICBID_SLAVE_WSS0_VMIDMT_CFG 217
++#define ICBID_SLAVE_WSS0_APU_CFG 218
++#define ICBID_SLAVE_WSS1_VMIDMT_CFG 219
++#define ICBID_SLAVE_WSS1_APU_CFG 220
++#define ICBID_SLAVE_SRVC_PCNOC 221
++#define ICBID_SLAVE_SNOC_DDRC 222
++#define ICBID_SLAVE_A7SS 223
++#define ICBID_SLAVE_WSS0_CFG 224
++#define ICBID_SLAVE_WSS1_CFG 225
++#define ICBID_SLAVE_PCIE 226
++#define ICBID_SLAVE_USB3_CFG 227
++#define ICBID_SLAVE_CRYPTO_CFG 228
++#define ICBID_SLAVE_ESS_CFG 229
++#define ICBID_SLAVE_SRVC_SNOC 230
++#endif
+--- /dev/null
++++ b/include/dt-bindings/msm/msm-bus-rule-ops.h
+@@ -0,0 +1,32 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __MSM_BUS_RULE_OPS_H
++#define __MSM_BUS_RULE_OPS_H
++
++#define FLD_IB 0
++#define FLD_AB 1
++#define FLD_CLK 2
++
++#define OP_LE 0
++#define OP_LT 1
++#define OP_GE 2
++#define OP_GT 3
++#define OP_NOOP 4
++
++#define RULE_STATE_NOT_APPLIED 0
++#define RULE_STATE_APPLIED 1
++
++#define THROTTLE_ON 0
++#define THROTTLE_OFF 1
++
++#endif
+--- /dev/null
++++ b/drivers/bus/msm_bus/Kconfig
+@@ -0,0 +1,19 @@
++config BUS_TOPOLOGY_ADHOC
++ bool "ad-hoc bus scaling topology"
++ depends on ARCH_QCOM
++ default n
++ help
++ This option enables a driver that can handle adhoc bus topologies.
++ Adhoc bus topology driver allows one to many connections and maintains
++ directionality of connections by explicitly listing device connections
++ thus avoiding illegal routes.
++
++config MSM_BUS_SCALING
++ bool "Bus scaling driver"
++ depends on BUS_TOPOLOGY_ADHOC
++ default n
++ help
++ This option enables bus scaling on MSM devices. Bus scaling
++ allows devices to request the clocks be set to rates sufficient
++ for the active devices needs without keeping the clocks at max
++ frequency when a slower speed is sufficient.
+--- /dev/null
++++ b/drivers/bus/msm_bus/Makefile
+@@ -0,0 +1,12 @@
++#
++# Makefile for msm-bus driver specific files
++#
++obj-y += msm_bus_bimc.o msm_bus_noc.o msm_bus_core.o msm_bus_client_api.o \
++ msm_bus_id.o
++obj-$(CONFIG_OF) += msm_bus_of.o
++
++obj-y += msm_bus_fabric_adhoc.o msm_bus_arb_adhoc.o msm_bus_rules.o
++obj-$(CONFIG_OF) += msm_bus_of_adhoc.o
++obj-$(CONFIG_CORESIGHT) += msm_buspm_coresight_adhoc.o
++
++obj-$(CONFIG_DEBUG_FS) += msm_bus_dbg.o
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm-bus-board.h
+@@ -0,0 +1,198 @@
++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef __ASM_ARCH_MSM_BUS_BOARD_H
++#define __ASM_ARCH_MSM_BUS_BOARD_H
++
++#include <linux/types.h>
++#include <linux/input.h>
++
++enum context {
++ DUAL_CTX,
++ ACTIVE_CTX,
++ NUM_CTX
++};
++
++struct msm_bus_fabric_registration {
++ unsigned int id;
++ const char *name;
++ struct msm_bus_node_info *info;
++ unsigned int len;
++ int ahb;
++ const char *fabclk[NUM_CTX];
++ const char *iface_clk;
++ unsigned int offset;
++ unsigned int haltid;
++ unsigned int rpm_enabled;
++ unsigned int nmasters;
++ unsigned int nslaves;
++ unsigned int ntieredslaves;
++ bool il_flag;
++ const struct msm_bus_board_algorithm *board_algo;
++ int hw_sel;
++ void *hw_data;
++ uint32_t qos_freq;
++ uint32_t qos_baseoffset;
++ u64 nr_lim_thresh;
++ uint32_t eff_fact;
++ uint32_t qos_delta;
++ bool virt;
++};
++
++struct msm_bus_device_node_registration {
++ struct msm_bus_node_device_type *info;
++ unsigned int num_devices;
++ bool virt;
++};
++
++enum msm_bus_bw_tier_type {
++ MSM_BUS_BW_TIER1 = 1,
++ MSM_BUS_BW_TIER2,
++ MSM_BUS_BW_COUNT,
++ MSM_BUS_BW_SIZE = 0x7FFFFFFF,
++};
++
++struct msm_bus_halt_vector {
++ uint32_t haltval;
++ uint32_t haltmask;
++};
++
++extern struct msm_bus_fabric_registration msm_bus_apps_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_sys_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_cpss_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_def_fab_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_8960_apps_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_sg_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_sys_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8960_cpss_fpb_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_8064_apps_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8064_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8064_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8064_sys_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8064_cpss_fpb_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_9615_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_9615_def_fab_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_8930_apps_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8930_sys_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8930_mm_fabric_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8930_sys_fpb_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8930_cpss_fpb_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_8974_sys_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_mmss_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_bimc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_periph_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_config_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_vnoc_pdata;
++
++extern struct msm_bus_fabric_registration msm_bus_9625_sys_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_9625_bimc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_9625_periph_noc_pdata;
++extern struct msm_bus_fabric_registration msm_bus_9625_config_noc_pdata;
++
++extern int msm_bus_device_match_adhoc(struct device *dev, void *id);
++
++void msm_bus_rpm_set_mt_mask(void);
++int msm_bus_board_rpm_get_il_ids(uint16_t *id);
++int msm_bus_board_get_iid(int id);
++
++#define NFAB_MSM8226 6
++#define NFAB_MSM8610 5
++
++/*
++ * These macros specify the convention followed for allocating
++ * ids to fabrics, masters and slaves for 8x60.
++ *
++ * A node can be identified as a master/slave/fabric by using
++ * these ids.
++ */
++#define FABRIC_ID_KEY 1024
++#define SLAVE_ID_KEY ((FABRIC_ID_KEY) >> 1)
++#define MAX_FAB_KEY 7168 /* OR(All fabric ids) */
++#define INT_NODE_START 10000
++
++#define GET_FABID(id) ((id) & MAX_FAB_KEY)
++
++#define NODE_ID(id) ((id) & (FABRIC_ID_KEY - 1))
++#define IS_SLAVE(id) ((NODE_ID(id)) >= SLAVE_ID_KEY ? 1 : 0)
++#define CHECK_ID(iid, id) (((iid & id) != id) ? -ENXIO : iid)
++
++/*
++ * The following macros are used to format the data for port halt
++ * and unhalt requests.
++ */
++#define MSM_BUS_CLK_HALT 0x1
++#define MSM_BUS_CLK_HALT_MASK 0x1
++#define MSM_BUS_CLK_HALT_FIELDSIZE 0x1
++#define MSM_BUS_CLK_UNHALT 0x0
++
++#define MSM_BUS_MASTER_SHIFT(master, fieldsize) \
++ ((master) * (fieldsize))
++
++#define MSM_BUS_SET_BITFIELD(word, fieldmask, fieldvalue) \
++ { \
++ (word) &= ~(fieldmask); \
++ (word) |= (fieldvalue); \
++ }
++
++
++#define MSM_BUS_MASTER_HALT(u32haltmask, u32haltval, master) \
++ MSM_BUS_SET_BITFIELD(u32haltmask, \
++ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++ MSM_BUS_CLK_HALT_FIELDSIZE), \
++ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++ MSM_BUS_CLK_HALT_FIELDSIZE))\
++ MSM_BUS_SET_BITFIELD(u32haltval, \
++ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++ MSM_BUS_CLK_HALT_FIELDSIZE), \
++ MSM_BUS_CLK_HALT<<MSM_BUS_MASTER_SHIFT((master),\
++ MSM_BUS_CLK_HALT_FIELDSIZE))\
++
++#define MSM_BUS_MASTER_UNHALT(u32haltmask, u32haltval, master) \
++ MSM_BUS_SET_BITFIELD(u32haltmask, \
++ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++ MSM_BUS_CLK_HALT_FIELDSIZE), \
++ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++ MSM_BUS_CLK_HALT_FIELDSIZE))\
++ MSM_BUS_SET_BITFIELD(u32haltval, \
++ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
++ MSM_BUS_CLK_HALT_FIELDSIZE), \
++ MSM_BUS_CLK_UNHALT<<MSM_BUS_MASTER_SHIFT((master),\
++ MSM_BUS_CLK_HALT_FIELDSIZE))\
++
++#define RPM_BUS_SLAVE_REQ 0x766c7362
++#define RPM_BUS_MASTER_REQ 0x73616d62
++
++enum msm_bus_rpm_slave_field_type {
++ RPM_SLAVE_FIELD_BW = 0x00007762,
++};
++
++enum msm_bus_rpm_mas_field_type {
++ RPM_MASTER_FIELD_BW = 0x00007762,
++ RPM_MASTER_FIELD_BW_T0 = 0x30747762,
++ RPM_MASTER_FIELD_BW_T1 = 0x31747762,
++ RPM_MASTER_FIELD_BW_T2 = 0x32747762,
++};
++
++#include <dt-bindings/msm/msm-bus-ids.h>
++
++
++#endif /*__ASM_ARCH_MSM_BUS_BOARD_H */
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm-bus.h
+@@ -0,0 +1,139 @@
++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_H
++#define _ARCH_ARM_MACH_MSM_BUS_H
++
++#include <linux/types.h>
++#include <linux/input.h>
++#include <linux/platform_device.h>
++
++/*
++ * Macros for clients to convert their data to ib and ab
++ * Ws : Time window over which to transfer the data in SECONDS
++ * Bs : Size of the data block in bytes
++ * Per : Recurrence period
++ * Tb : Throughput bandwidth to prevent stalling
++ * R : Ratio of actual bandwidth used to Tb
++ * Ib : Instantaneous bandwidth
++ * Ab : Arbitrated bandwidth
++ *
++ * IB_RECURRBLOCK and AB_RECURRBLOCK:
++ * These are used if the requirement is to transfer a
++ * recurring block of data over a known time window.
++ *
++ * IB_THROUGHPUTBW and AB_THROUGHPUTBW:
++ * These are used for CPU style masters. Here the requirement
++ * is to have minimum throughput bandwidth available to avoid
++ * stalling.
++ */
++#define IB_RECURRBLOCK(Ws, Bs) ((Ws) == 0 ? 0 : ((Bs)/(Ws)))
++#define AB_RECURRBLOCK(Ws, Per) ((Ws) == 0 ? 0 : ((Bs)/(Per)))
++#define IB_THROUGHPUTBW(Tb) (Tb)
++#define AB_THROUGHPUTBW(Tb, R) ((Tb) * (R))
++
++struct msm_bus_vectors {
++ int src; /* Master */
++ int dst; /* Slave */
++ uint64_t ab; /* Arbitrated bandwidth */
++ uint64_t ib; /* Instantaneous bandwidth */
++};
++
++struct msm_bus_paths {
++ int num_paths;
++ struct msm_bus_vectors *vectors;
++};
++
++struct msm_bus_scale_pdata {
++ struct msm_bus_paths *usecase;
++ int num_usecases;
++ const char *name;
++ /*
++ * If the active_only flag is set to 1, the BW request is applied
++ * only when at least one CPU is active (powered on). If the flag
++ * is set to 0, then the BW request is always applied irrespective
++ * of the CPU state.
++ */
++ unsigned int active_only;
++};
++
++/* Scaling APIs */
++
++/*
++ * This function returns a handle to the client. This should be used to
++ * call msm_bus_scale_client_update_request.
++ * The function returns 0 if bus driver is unable to register a client
++ */
++
++#if (defined(CONFIG_MSM_BUS_SCALING) || defined(CONFIG_BUS_TOPOLOGY_ADHOC))
++int __init msm_bus_fabric_init_driver(void);
++uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata);
++int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index);
++void msm_bus_scale_unregister_client(uint32_t cl);
++/* AXI Port configuration APIs */
++int msm_bus_axi_porthalt(int master_port);
++int msm_bus_axi_portunhalt(int master_port);
++
++#else
++static inline int __init msm_bus_fabric_init_driver(void) { return 0; }
++
++static inline uint32_t
++msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata)
++{
++ return 1;
++}
++
++static inline int
++msm_bus_scale_client_update_request(uint32_t cl, unsigned int index)
++{
++ return 0;
++}
++
++static inline void
++msm_bus_scale_unregister_client(uint32_t cl)
++{
++}
++
++static inline int msm_bus_axi_porthalt(int master_port)
++{
++ return 0;
++}
++
++static inline int msm_bus_axi_portunhalt(int master_port)
++{
++ return 0;
++}
++#endif
++
++#if defined(CONFIG_OF) && defined(CONFIG_MSM_BUS_SCALING)
++struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
++ struct platform_device *pdev, struct device_node *of_node);
++struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev);
++void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata);
++#else
++static inline struct msm_bus_scale_pdata
++*msm_bus_cl_get_pdata(struct platform_device *pdev)
++{
++ return NULL;
++}
++
++static inline struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
++ struct platform_device *pdev, struct device_node *of_node)
++{
++ return NULL;
++}
++
++static inline void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata)
++{
++}
++#endif
++#endif /*_ARCH_ARM_MACH_MSM_BUS_H*/
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_adhoc.h
+@@ -0,0 +1,141 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_ADHOC_H
++#define _ARCH_ARM_MACH_MSM_BUS_ADHOC_H
++
++#include <linux/types.h>
++#include <linux/device.h>
++#include "msm-bus-board.h"
++#include "msm-bus.h"
++#include "msm_bus_rules.h"
++#include "msm_bus_core.h"
++
++struct msm_bus_node_device_type;
++struct link_node {
++ uint64_t lnode_ib[NUM_CTX];
++ uint64_t lnode_ab[NUM_CTX];
++ int next;
++ struct device *next_dev;
++ struct list_head link;
++ uint32_t in_use;
++};
++
++/* New types introduced for adhoc topology */
++struct msm_bus_noc_ops {
++ int (*qos_init)(struct msm_bus_node_device_type *dev,
++ void __iomem *qos_base, uint32_t qos_off,
++ uint32_t qos_delta, uint32_t qos_freq);
++ int (*set_bw)(struct msm_bus_node_device_type *dev,
++ void __iomem *qos_base, uint32_t qos_off,
++ uint32_t qos_delta, uint32_t qos_freq);
++ int (*limit_mport)(struct msm_bus_node_device_type *dev,
++ void __iomem *qos_base, uint32_t qos_off,
++ uint32_t qos_delta, uint32_t qos_freq, bool enable_lim,
++ uint64_t lim_bw);
++ bool (*update_bw_reg)(int mode);
++};
++
++struct nodebw {
++ uint64_t ab[NUM_CTX];
++ bool dirty;
++};
++
++struct msm_bus_fab_device_type {
++ void __iomem *qos_base;
++ phys_addr_t pqos_base;
++ size_t qos_range;
++ uint32_t base_offset;
++ uint32_t qos_freq;
++ uint32_t qos_off;
++ uint32_t util_fact;
++ uint32_t vrail_comp;
++ struct msm_bus_noc_ops noc_ops;
++ enum msm_bus_hw_sel bus_type;
++ bool bypass_qos_prg;
++};
++
++struct qos_params_type {
++ int mode;
++ unsigned int prio_lvl;
++ unsigned int prio_rd;
++ unsigned int prio_wr;
++ unsigned int prio1;
++ unsigned int prio0;
++ unsigned int gp;
++ unsigned int thmp;
++ unsigned int ws;
++ int cur_mode;
++ u64 bw_buffer;
++};
++
++struct msm_bus_node_info_type {
++ const char *name;
++ unsigned int id;
++ int mas_rpm_id;
++ int slv_rpm_id;
++ int num_ports;
++ int num_qports;
++ int *qport;
++ struct qos_params_type qos_params;
++ unsigned int num_connections;
++ unsigned int num_blist;
++ bool is_fab_dev;
++ bool virt_dev;
++ bool is_traversed;
++ unsigned int *connections;
++ unsigned int *black_listed_connections;
++ struct device **dev_connections;
++ struct device **black_connections;
++ unsigned int bus_device_id;
++ struct device *bus_device;
++ unsigned int buswidth;
++ struct rule_update_path_info rule;
++ uint64_t lim_bw;
++ uint32_t util_fact;
++ uint32_t vrail_comp;
++};
++
++struct msm_bus_node_device_type {
++ struct msm_bus_node_info_type *node_info;
++ struct msm_bus_fab_device_type *fabdev;
++ int num_lnodes;
++ struct link_node *lnode_list;
++ uint64_t cur_clk_hz[NUM_CTX];
++ struct nodebw node_ab;
++ struct list_head link;
++ unsigned int ap_owned;
++ struct nodeclk clk[NUM_CTX];
++ struct nodeclk qos_clk;
++};
++
++int msm_bus_enable_limiter(struct msm_bus_node_device_type *nodedev,
++ bool throttle_en, uint64_t lim_bw);
++int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev,
++ int ctx, int **dirty_nodes, int *num_dirty);
++int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty);
++int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx,
++ int64_t add_bw, int **dirty_nodes, int *num_dirty);
++void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size,
++ size_t new_size, gfp_t flags);
++
++extern struct msm_bus_device_node_registration
++ *msm_bus_of_to_pdata(struct platform_device *pdev);
++extern void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops);
++extern int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev);
++extern int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev);
++extern int msm_bus_of_get_static_rules(struct platform_device *pdev,
++ struct bus_rule_type **static_rule);
++extern int msm_rules_update_path(struct list_head *input_list,
++ struct list_head *output_list);
++extern void print_all_rules(void);
++#endif /* _ARCH_ARM_MACH_MSM_BUS_ADHOC_H */
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_arb_adhoc.c
+@@ -0,0 +1,998 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is Mree software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/clk.h>
++#include "msm-bus.h"
++#include "msm_bus_core.h"
++#include "msm_bus_adhoc.h"
++
++#define NUM_CL_HANDLES 50
++#define NUM_LNODES 3
++
++struct bus_search_type {
++ struct list_head link;
++ struct list_head node_list;
++};
++
++struct handle_type {
++ int num_entries;
++ struct msm_bus_client **cl_list;
++};
++
++static struct handle_type handle_list;
++struct list_head input_list;
++struct list_head apply_list;
++
++DEFINE_MUTEX(msm_bus_adhoc_lock);
++
++static bool chk_bl_list(struct list_head *black_list, unsigned int id)
++{
++ struct msm_bus_node_device_type *bus_node = NULL;
++
++ list_for_each_entry(bus_node, black_list, link) {
++ if (bus_node->node_info->id == id)
++ return true;
++ }
++ return false;
++}
++
++static void copy_remaining_nodes(struct list_head *edge_list, struct list_head
++ *traverse_list, struct list_head *route_list)
++{
++ struct bus_search_type *search_node;
++
++ if (list_empty(edge_list) && list_empty(traverse_list))
++ return;
++
++ search_node = kzalloc(sizeof(struct bus_search_type), GFP_KERNEL);
++ INIT_LIST_HEAD(&search_node->node_list);
++ list_splice_init(edge_list, traverse_list);
++ list_splice_init(traverse_list, &search_node->node_list);
++ list_add_tail(&search_node->link, route_list);
++}
++
++/*
++ * Duplicate instantiaion from msm_bus_arb.c. Todo there needs to be a
++ * "util" file for these common func/macros.
++ *
++ * */
++uint64_t msm_bus_div64(unsigned int w, uint64_t bw)
++{
++ uint64_t *b = &bw;
++
++ if ((bw > 0) && (bw < w))
++ return 1;
++
++ switch (w) {
++ case 0:
++ WARN(1, "AXI: Divide by 0 attempted\n");
++ case 1: return bw;
++ case 2: return (bw >> 1);
++ case 4: return (bw >> 2);
++ case 8: return (bw >> 3);
++ case 16: return (bw >> 4);
++ case 32: return (bw >> 5);
++ }
++
++ do_div(*b, w);
++ return *b;
++}
++
++int msm_bus_device_match_adhoc(struct device *dev, void *id)
++{
++ int ret = 0;
++ struct msm_bus_node_device_type *bnode = dev->platform_data;
++
++ if (bnode)
++ ret = (bnode->node_info->id == *(unsigned int *)id);
++ else
++ ret = 0;
++
++ return ret;
++}
++
++static int gen_lnode(struct device *dev,
++ int next_hop, int prev_idx)
++{
++ struct link_node *lnode;
++ struct msm_bus_node_device_type *cur_dev = NULL;
++ int lnode_idx = -1;
++
++ if (!dev)
++ goto exit_gen_lnode;
++
++ cur_dev = dev->platform_data;
++ if (!cur_dev) {
++ MSM_BUS_ERR("%s: Null device ptr", __func__);
++ goto exit_gen_lnode;
++ }
++
++ if (!cur_dev->num_lnodes) {
++ cur_dev->lnode_list = devm_kzalloc(dev,
++ sizeof(struct link_node) * NUM_LNODES,
++ GFP_KERNEL);
++ if (!cur_dev->lnode_list)
++ goto exit_gen_lnode;
++
++ lnode = cur_dev->lnode_list;
++ cur_dev->num_lnodes = NUM_LNODES;
++ lnode_idx = 0;
++ } else {
++ int i;
++ for (i = 0; i < cur_dev->num_lnodes; i++) {
++ if (!cur_dev->lnode_list[i].in_use)
++ break;
++ }
++
++ if (i < cur_dev->num_lnodes) {
++ lnode = &cur_dev->lnode_list[i];
++ lnode_idx = i;
++ } else {
++ struct link_node *realloc_list;
++ size_t cur_size = sizeof(struct link_node) *
++ cur_dev->num_lnodes;
++
++ cur_dev->num_lnodes += NUM_LNODES;
++ realloc_list = msm_bus_realloc_devmem(
++ dev,
++ cur_dev->lnode_list,
++ cur_size,
++ sizeof(struct link_node) *
++ cur_dev->num_lnodes, GFP_KERNEL);
++
++ if (!realloc_list)
++ goto exit_gen_lnode;
++
++ cur_dev->lnode_list = realloc_list;
++ lnode = &cur_dev->lnode_list[i];
++ lnode_idx = i;
++ }
++ }
++
++ lnode->in_use = 1;
++ if (next_hop == cur_dev->node_info->id) {
++ lnode->next = -1;
++ lnode->next_dev = NULL;
++ } else {
++ lnode->next = prev_idx;
++ lnode->next_dev = bus_find_device(&msm_bus_type, NULL,
++ (void *) &next_hop,
++ msm_bus_device_match_adhoc);
++ }
++
++ memset(lnode->lnode_ib, 0, sizeof(uint64_t) * NUM_CTX);
++ memset(lnode->lnode_ab, 0, sizeof(uint64_t) * NUM_CTX);
++
++exit_gen_lnode:
++ return lnode_idx;
++}
++
++static int remove_lnode(struct msm_bus_node_device_type *cur_dev,
++ int lnode_idx)
++{
++ int ret = 0;
++
++ if (!cur_dev) {
++ MSM_BUS_ERR("%s: Null device ptr", __func__);
++ ret = -ENODEV;
++ goto exit_remove_lnode;
++ }
++
++ if (lnode_idx != -1) {
++ if (!cur_dev->num_lnodes ||
++ (lnode_idx > (cur_dev->num_lnodes - 1))) {
++ MSM_BUS_ERR("%s: Invalid Idx %d, num_lnodes %d",
++ __func__, lnode_idx, cur_dev->num_lnodes);
++ ret = -ENODEV;
++ goto exit_remove_lnode;
++ }
++
++ cur_dev->lnode_list[lnode_idx].next = -1;
++ cur_dev->lnode_list[lnode_idx].next_dev = NULL;
++ cur_dev->lnode_list[lnode_idx].in_use = 0;
++ }
++
++exit_remove_lnode:
++ return ret;
++}
++
++static int prune_path(struct list_head *route_list, int dest, int src,
++ struct list_head *black_list, int found)
++{
++ struct bus_search_type *search_node, *temp_search_node;
++ struct msm_bus_node_device_type *bus_node;
++ struct list_head *bl_list;
++ struct list_head *temp_bl_list;
++ int search_dev_id = dest;
++ struct device *dest_dev = bus_find_device(&msm_bus_type, NULL,
++ (void *) &dest,
++ msm_bus_device_match_adhoc);
++ int lnode_hop = -1;
++
++ if (!found)
++ goto reset_links;
++
++ if (!dest_dev) {
++ MSM_BUS_ERR("%s: Can't find dest dev %d", __func__, dest);
++ goto exit_prune_path;
++ }
++
++ lnode_hop = gen_lnode(dest_dev, search_dev_id, lnode_hop);
++
++ list_for_each_entry_reverse(search_node, route_list, link) {
++ list_for_each_entry(bus_node, &search_node->node_list, link) {
++ unsigned int i;
++ for (i = 0; i < bus_node->node_info->num_connections;
++ i++) {
++ if (bus_node->node_info->connections[i] ==
++ search_dev_id) {
++ dest_dev = bus_find_device(
++ &msm_bus_type,
++ NULL,
++ (void *)
++ &bus_node->node_info->
++ id,
++ msm_bus_device_match_adhoc);
++
++ if (!dest_dev) {
++ lnode_hop = -1;
++ goto reset_links;
++ }
++
++ lnode_hop = gen_lnode(dest_dev,
++ search_dev_id,
++ lnode_hop);
++ search_dev_id =
++ bus_node->node_info->id;
++ break;
++ }
++ }
++ }
++ }
++reset_links:
++ list_for_each_entry_safe(search_node, temp_search_node, route_list,
++ link) {
++ list_for_each_entry(bus_node, &search_node->node_list,
++ link)
++ bus_node->node_info->is_traversed = false;
++
++ list_del(&search_node->link);
++ kfree(search_node);
++ }
++
++ list_for_each_safe(bl_list, temp_bl_list, black_list)
++ list_del(bl_list);
++
++exit_prune_path:
++ return lnode_hop;
++}
++
++static void setup_bl_list(struct msm_bus_node_device_type *node,
++ struct list_head *black_list)
++{
++ unsigned int i;
++
++ for (i = 0; i < node->node_info->num_blist; i++) {
++ struct msm_bus_node_device_type *bdev;
++ bdev = node->node_info->black_connections[i]->platform_data;
++ list_add_tail(&bdev->link, black_list);
++ }
++}
++
++static int getpath(int src, int dest)
++{
++ struct list_head traverse_list;
++ struct list_head edge_list;
++ struct list_head route_list;
++ struct list_head black_list;
++ struct device *src_dev = bus_find_device(&msm_bus_type, NULL,
++ (void *) &src,
++ msm_bus_device_match_adhoc);
++ struct msm_bus_node_device_type *src_node;
++ struct bus_search_type *search_node;
++ int found = 0;
++ int depth_index = 0;
++ int first_hop = -1;
++
++ INIT_LIST_HEAD(&traverse_list);
++ INIT_LIST_HEAD(&edge_list);
++ INIT_LIST_HEAD(&route_list);
++ INIT_LIST_HEAD(&black_list);
++
++ if (!src_dev) {
++ MSM_BUS_ERR("%s: Cannot locate src dev %d", __func__, src);
++ goto exit_getpath;
++ }
++
++ src_node = src_dev->platform_data;
++ if (!src_node) {
++ MSM_BUS_ERR("%s:Fatal, Source dev %d not found", __func__, src);
++ goto exit_getpath;
++ }
++ list_add_tail(&src_node->link, &traverse_list);
++
++ while ((!found && !list_empty(&traverse_list))) {
++ struct msm_bus_node_device_type *bus_node = NULL;
++ /* Locate dest_id in the traverse list */
++ list_for_each_entry(bus_node, &traverse_list, link) {
++ if (bus_node->node_info->id == dest) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (!found) {
++ unsigned int i;
++ /* Setup the new edge list */
++ list_for_each_entry(bus_node, &traverse_list, link) {
++ /* Setup list of black-listed nodes */
++ setup_bl_list(bus_node, &black_list);
++
++ for (i = 0; i < bus_node->node_info->
++ num_connections; i++) {
++ bool skip;
++ struct msm_bus_node_device_type
++ *node_conn;
++ node_conn = bus_node->node_info->
++ dev_connections[i]->
++ platform_data;
++ if (node_conn->node_info->
++ is_traversed) {
++ MSM_BUS_ERR("Circ Path %d\n",
++ node_conn->node_info->id);
++ goto reset_traversed;
++ }
++ skip = chk_bl_list(&black_list,
++ bus_node->node_info->
++ connections[i]);
++ if (!skip) {
++ list_add_tail(&node_conn->link,
++ &edge_list);
++ node_conn->node_info->
++ is_traversed = true;
++ }
++ }
++ }
++
++ /* Keep tabs of the previous search list */
++ search_node = kzalloc(sizeof(struct bus_search_type),
++ GFP_KERNEL);
++ INIT_LIST_HEAD(&search_node->node_list);
++ list_splice_init(&traverse_list,
++ &search_node->node_list);
++ /* Add the previous search list to a route list */
++ list_add_tail(&search_node->link, &route_list);
++ /* Advancing the list depth */
++ depth_index++;
++ list_splice_init(&edge_list, &traverse_list);
++ }
++ }
++reset_traversed:
++ copy_remaining_nodes(&edge_list, &traverse_list, &route_list);
++ first_hop = prune_path(&route_list, dest, src, &black_list, found);
++
++exit_getpath:
++ return first_hop;
++}
++
++static uint64_t arbitrate_bus_req(struct msm_bus_node_device_type *bus_dev,
++ int ctx)
++{
++ int i;
++ uint64_t max_ib = 0;
++ uint64_t sum_ab = 0;
++ uint64_t bw_max_hz;
++ struct msm_bus_node_device_type *fab_dev = NULL;
++ uint32_t util_fact = 0;
++ uint32_t vrail_comp = 0;
++
++ /* Find max ib */
++ for (i = 0; i < bus_dev->num_lnodes; i++) {
++ max_ib = max(max_ib, bus_dev->lnode_list[i].lnode_ib[ctx]);
++ sum_ab += bus_dev->lnode_list[i].lnode_ab[ctx];
++ }
++ /*
++ * Account for Util factor and vrail comp. The new aggregation
++ * formula is:
++ * Freq_hz = max((sum(ab) * util_fact)/num_chan, max(ib)/vrail_comp)
++ * / bus-width
++ * util_fact and vrail comp are obtained from fabric/Node's dts
++ * properties.
++ * They default to 100 if absent.
++ */
++ fab_dev = bus_dev->node_info->bus_device->platform_data;
++ /* Don't do this for virtual fabrics */
++ if (fab_dev && fab_dev->fabdev) {
++ util_fact = bus_dev->node_info->util_fact ?
++ bus_dev->node_info->util_fact :
++ fab_dev->fabdev->util_fact;
++ vrail_comp = bus_dev->node_info->vrail_comp ?
++ bus_dev->node_info->vrail_comp :
++ fab_dev->fabdev->vrail_comp;
++ sum_ab *= util_fact;
++ sum_ab = msm_bus_div64(100, sum_ab);
++ max_ib *= 100;
++ max_ib = msm_bus_div64(vrail_comp, max_ib);
++ }
++
++ /* Account for multiple channels if any */
++ if (bus_dev->node_info->num_qports > 1)
++ sum_ab = msm_bus_div64(bus_dev->node_info->num_qports,
++ sum_ab);
++
++ if (!bus_dev->node_info->buswidth) {
++ MSM_BUS_WARN("No bus width found for %d. Using default\n",
++ bus_dev->node_info->id);
++ bus_dev->node_info->buswidth = 8;
++ }
++
++ bw_max_hz = max(max_ib, sum_ab);
++ bw_max_hz = msm_bus_div64(bus_dev->node_info->buswidth,
++ bw_max_hz);
++
++ return bw_max_hz;
++}
++
++static void del_inp_list(struct list_head *list)
++{
++ struct rule_update_path_info *rule_node;
++ struct rule_update_path_info *rule_node_tmp;
++
++ list_for_each_entry_safe(rule_node, rule_node_tmp, list, link)
++ list_del(&rule_node->link);
++}
++
++static void del_op_list(struct list_head *list)
++{
++ struct rule_apply_rcm_info *rule;
++ struct rule_apply_rcm_info *rule_tmp;
++
++ list_for_each_entry_safe(rule, rule_tmp, list, link)
++ list_del(&rule->link);
++}
++
++static int msm_bus_apply_rules(struct list_head *list, bool after_clk_commit)
++{
++ struct rule_apply_rcm_info *rule;
++ struct device *dev = NULL;
++ struct msm_bus_node_device_type *dev_info = NULL;
++ int ret = 0;
++ bool throttle_en = false;
++
++ list_for_each_entry(rule, list, link) {
++ if (!rule)
++ break;
++
++ if (rule && (rule->after_clk_commit != after_clk_commit))
++ continue;
++
++ dev = bus_find_device(&msm_bus_type, NULL,
++ (void *) &rule->id,
++ msm_bus_device_match_adhoc);
++
++ if (!dev) {
++ MSM_BUS_ERR("Can't find dev node for %d", rule->id);
++ continue;
++ }
++ dev_info = dev->platform_data;
++
++ throttle_en = ((rule->throttle == THROTTLE_ON) ? true : false);
++ ret = msm_bus_enable_limiter(dev_info, throttle_en,
++ rule->lim_bw);
++ if (ret)
++ MSM_BUS_ERR("Failed to set limiter for %d", rule->id);
++ }
++
++ return ret;
++}
++
++static uint64_t get_node_aggab(struct msm_bus_node_device_type *bus_dev)
++{
++ int i;
++ int ctx;
++ uint64_t max_agg_ab = 0;
++ uint64_t agg_ab = 0;
++
++ for (ctx = 0; ctx < NUM_CTX; ctx++) {
++ for (i = 0; i < bus_dev->num_lnodes; i++)
++ agg_ab += bus_dev->lnode_list[i].lnode_ab[ctx];
++
++ if (bus_dev->node_info->num_qports > 1)
++ agg_ab = msm_bus_div64(bus_dev->node_info->num_qports,
++ agg_ab);
++
++ max_agg_ab = max(max_agg_ab, agg_ab);
++ }
++
++ return max_agg_ab;
++}
++
++static uint64_t get_node_ib(struct msm_bus_node_device_type *bus_dev)
++{
++ int i;
++ int ctx;
++ uint64_t max_ib = 0;
++
++ for (ctx = 0; ctx < NUM_CTX; ctx++) {
++ for (i = 0; i < bus_dev->num_lnodes; i++)
++ max_ib = max(max_ib,
++ bus_dev->lnode_list[i].lnode_ib[ctx]);
++ }
++ return max_ib;
++}
++
++static int update_path(int src, int dest, uint64_t req_ib, uint64_t req_bw,
++ uint64_t cur_ib, uint64_t cur_bw, int src_idx, int ctx)
++{
++ struct device *src_dev = NULL;
++ struct device *next_dev = NULL;
++ struct link_node *lnode = NULL;
++ struct msm_bus_node_device_type *dev_info = NULL;
++ int curr_idx;
++ int ret = 0;
++ int *dirty_nodes = NULL;
++ int num_dirty = 0;
++ struct rule_update_path_info *rule_node;
++ bool rules_registered = msm_rule_are_rules_registered();
++
++ src_dev = bus_find_device(&msm_bus_type, NULL,
++ (void *) &src,
++ msm_bus_device_match_adhoc);
++
++ if (!src_dev) {
++ MSM_BUS_ERR("%s: Can't find source device %d", __func__, src);
++ ret = -ENODEV;
++ goto exit_update_path;
++ }
++
++ next_dev = src_dev;
++
++ if (src_idx < 0) {
++ MSM_BUS_ERR("%s: Invalid lnode idx %d", __func__, src_idx);
++ ret = -ENXIO;
++ goto exit_update_path;
++ }
++ curr_idx = src_idx;
++
++ INIT_LIST_HEAD(&input_list);
++ INIT_LIST_HEAD(&apply_list);
++
++ while (next_dev) {
++ dev_info = next_dev->platform_data;
++
++ if (curr_idx >= dev_info->num_lnodes) {
++ MSM_BUS_ERR("%s: Invalid lnode Idx %d num lnodes %d",
++ __func__, curr_idx, dev_info->num_lnodes);
++ ret = -ENXIO;
++ goto exit_update_path;
++ }
++
++ lnode = &dev_info->lnode_list[curr_idx];
++ lnode->lnode_ib[ctx] = req_ib;
++ lnode->lnode_ab[ctx] = req_bw;
++
++ dev_info->cur_clk_hz[ctx] = arbitrate_bus_req(dev_info, ctx);
++
++ /* Start updating the clocks at the first hop.
++ * Its ok to figure out the aggregated
++ * request at this node.
++ */
++ if (src_dev != next_dev) {
++ ret = msm_bus_update_clks(dev_info, ctx, &dirty_nodes,
++ &num_dirty);
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to update clks dev %d",
++ __func__, dev_info->node_info->id);
++ goto exit_update_path;
++ }
++ }
++
++ ret = msm_bus_update_bw(dev_info, ctx, req_bw, &dirty_nodes,
++ &num_dirty);
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to update bw dev %d",
++ __func__, dev_info->node_info->id);
++ goto exit_update_path;
++ }
++
++ if (rules_registered) {
++ rule_node = &dev_info->node_info->rule;
++ rule_node->id = dev_info->node_info->id;
++ rule_node->ib = get_node_ib(dev_info);
++ rule_node->ab = get_node_aggab(dev_info);
++ rule_node->clk = max(dev_info->cur_clk_hz[ACTIVE_CTX],
++ dev_info->cur_clk_hz[DUAL_CTX]);
++ list_add_tail(&rule_node->link, &input_list);
++ }
++
++ next_dev = lnode->next_dev;
++ curr_idx = lnode->next;
++ }
++
++ if (rules_registered) {
++ msm_rules_update_path(&input_list, &apply_list);
++ msm_bus_apply_rules(&apply_list, false);
++ }
++
++ msm_bus_commit_data(dirty_nodes, ctx, num_dirty);
++
++ if (rules_registered) {
++ msm_bus_apply_rules(&apply_list, true);
++ del_inp_list(&input_list);
++ del_op_list(&apply_list);
++ }
++exit_update_path:
++ return ret;
++}
++
++static int remove_path(int src, int dst, uint64_t cur_ib, uint64_t cur_ab,
++ int src_idx, int active_only)
++{
++ struct device *src_dev = NULL;
++ struct device *next_dev = NULL;
++ struct link_node *lnode = NULL;
++ struct msm_bus_node_device_type *dev_info = NULL;
++ int ret = 0;
++ int cur_idx = src_idx;
++ int next_idx;
++
++ /* Update the current path to zero out all request from
++ * this cient on all paths
++ */
++
++ ret = update_path(src, dst, 0, 0, cur_ib, cur_ab, src_idx,
++ active_only);
++ if (ret) {
++ MSM_BUS_ERR("%s: Error zeroing out path ctx %d",
++ __func__, ACTIVE_CTX);
++ goto exit_remove_path;
++ }
++
++ src_dev = bus_find_device(&msm_bus_type, NULL,
++ (void *) &src,
++ msm_bus_device_match_adhoc);
++ if (!src_dev) {
++ MSM_BUS_ERR("%s: Can't find source device %d", __func__, src);
++ ret = -ENODEV;
++ goto exit_remove_path;
++ }
++
++ next_dev = src_dev;
++
++ while (next_dev) {
++ dev_info = next_dev->platform_data;
++ lnode = &dev_info->lnode_list[cur_idx];
++ next_idx = lnode->next;
++ next_dev = lnode->next_dev;
++ remove_lnode(dev_info, cur_idx);
++ cur_idx = next_idx;
++ }
++
++exit_remove_path:
++ return ret;
++}
++
++static void getpath_debug(int src, int curr, int active_only)
++{
++ struct device *dev_node;
++ struct device *dev_it;
++ unsigned int hop = 1;
++ int idx;
++ struct msm_bus_node_device_type *devinfo;
++ int i;
++
++ dev_node = bus_find_device(&msm_bus_type, NULL,
++ (void *) &src,
++ msm_bus_device_match_adhoc);
++
++ if (!dev_node) {
++ MSM_BUS_ERR("SRC NOT FOUND %d", src);
++ return;
++ }
++
++ idx = curr;
++ devinfo = dev_node->platform_data;
++ dev_it = dev_node;
++
++ MSM_BUS_ERR("Route list Src %d", src);
++ while (dev_it) {
++ struct msm_bus_node_device_type *busdev =
++ devinfo->node_info->bus_device->platform_data;
++
++ MSM_BUS_ERR("Hop[%d] at Device %d ctx %d", hop,
++ devinfo->node_info->id, active_only);
++
++ for (i = 0; i < NUM_CTX; i++) {
++ MSM_BUS_ERR("dev info sel ib %llu",
++ devinfo->cur_clk_hz[i]);
++ MSM_BUS_ERR("dev info sel ab %llu",
++ devinfo->node_ab.ab[i]);
++ }
++
++ dev_it = devinfo->lnode_list[idx].next_dev;
++ idx = devinfo->lnode_list[idx].next;
++ if (dev_it)
++ devinfo = dev_it->platform_data;
++
++ MSM_BUS_ERR("Bus Device %d", busdev->node_info->id);
++ MSM_BUS_ERR("Bus Clock %llu", busdev->clk[active_only].rate);
++
++ if (idx < 0)
++ break;
++ hop++;
++ }
++}
++
++static void unregister_client_adhoc(uint32_t cl)
++{
++ int i;
++ struct msm_bus_scale_pdata *pdata;
++ int lnode, src, curr, dest;
++ uint64_t cur_clk, cur_bw;
++ struct msm_bus_client *client;
++
++ mutex_lock(&msm_bus_adhoc_lock);
++ if (!cl) {
++ MSM_BUS_ERR("%s: Null cl handle passed unregister\n",
++ __func__);
++ goto exit_unregister_client;
++ }
++ client = handle_list.cl_list[cl];
++ pdata = client->pdata;
++ if (!pdata) {
++ MSM_BUS_ERR("%s: Null pdata passed to unregister\n",
++ __func__);
++ goto exit_unregister_client;
++ }
++
++ curr = client->curr;
++ if (curr >= pdata->num_usecases) {
++ MSM_BUS_ERR("Invalid index Defaulting curr to 0");
++ curr = 0;
++ }
++
++ MSM_BUS_DBG("%s: Unregistering client %p", __func__, client);
++
++ for (i = 0; i < pdata->usecase->num_paths; i++) {
++ src = client->pdata->usecase[curr].vectors[i].src;
++ dest = client->pdata->usecase[curr].vectors[i].dst;
++
++ lnode = client->src_pnode[i];
++ cur_clk = client->pdata->usecase[curr].vectors[i].ib;
++ cur_bw = client->pdata->usecase[curr].vectors[i].ab;
++ remove_path(src, dest, cur_clk, cur_bw, lnode,
++ pdata->active_only);
++ }
++ msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_UNREGISTER, cl);
++ kfree(client->src_pnode);
++ kfree(client);
++ handle_list.cl_list[cl] = NULL;
++exit_unregister_client:
++ mutex_unlock(&msm_bus_adhoc_lock);
++ return;
++}
++
++static int alloc_handle_lst(int size)
++{
++ int ret = 0;
++ struct msm_bus_client **t_cl_list;
++
++ if (!handle_list.num_entries) {
++ t_cl_list = kzalloc(sizeof(struct msm_bus_client *)
++ * NUM_CL_HANDLES, GFP_KERNEL);
++ if (ZERO_OR_NULL_PTR(t_cl_list)) {
++ ret = -ENOMEM;
++ MSM_BUS_ERR("%s: Failed to allocate handles list",
++ __func__);
++ goto exit_alloc_handle_lst;
++ }
++ handle_list.cl_list = t_cl_list;
++ handle_list.num_entries += NUM_CL_HANDLES;
++ } else {
++ t_cl_list = krealloc(handle_list.cl_list,
++ sizeof(struct msm_bus_client *) *
++ handle_list.num_entries + NUM_CL_HANDLES,
++ GFP_KERNEL);
++ if (ZERO_OR_NULL_PTR(t_cl_list)) {
++ ret = -ENOMEM;
++ MSM_BUS_ERR("%s: Failed to allocate handles list",
++ __func__);
++ goto exit_alloc_handle_lst;
++ }
++
++ memset(&handle_list.cl_list[handle_list.num_entries], 0,
++ NUM_CL_HANDLES * sizeof(struct msm_bus_client *));
++ handle_list.num_entries += NUM_CL_HANDLES;
++ handle_list.cl_list = t_cl_list;
++ }
++exit_alloc_handle_lst:
++ return ret;
++}
++
++static uint32_t gen_handle(struct msm_bus_client *client)
++{
++ uint32_t handle = 0;
++ int i;
++ int ret = 0;
++
++ for (i = 0; i < handle_list.num_entries; i++) {
++ if (i && !handle_list.cl_list[i]) {
++ handle = i;
++ break;
++ }
++ }
++
++ if (!handle) {
++ ret = alloc_handle_lst(NUM_CL_HANDLES);
++
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to allocate handle list",
++ __func__);
++ goto exit_gen_handle;
++ }
++ handle = i + 1;
++ }
++ handle_list.cl_list[handle] = client;
++exit_gen_handle:
++ return handle;
++}
++
++static uint32_t register_client_adhoc(struct msm_bus_scale_pdata *pdata)
++{
++ int src, dest;
++ int i;
++ struct msm_bus_client *client = NULL;
++ int *lnode;
++ uint32_t handle = 0;
++
++ mutex_lock(&msm_bus_adhoc_lock);
++ client = kzalloc(sizeof(struct msm_bus_client), GFP_KERNEL);
++ if (!client) {
++ MSM_BUS_ERR("%s: Error allocating client data", __func__);
++ goto exit_register_client;
++ }
++ client->pdata = pdata;
++
++ lnode = kzalloc(pdata->usecase->num_paths * sizeof(int), GFP_KERNEL);
++ if (ZERO_OR_NULL_PTR(lnode)) {
++ MSM_BUS_ERR("%s: Error allocating pathnode ptr!", __func__);
++ goto exit_register_client;
++ }
++ client->src_pnode = lnode;
++
++ for (i = 0; i < pdata->usecase->num_paths; i++) {
++ src = pdata->usecase->vectors[i].src;
++ dest = pdata->usecase->vectors[i].dst;
++
++ if ((src < 0) || (dest < 0)) {
++ MSM_BUS_ERR("%s:Invalid src/dst.src %d dest %d",
++ __func__, src, dest);
++ goto exit_register_client;
++ }
++
++ lnode[i] = getpath(src, dest);
++ if (lnode[i] < 0) {
++ MSM_BUS_ERR("%s:Failed to find path.src %d dest %d",
++ __func__, src, dest);
++ goto exit_register_client;
++ }
++ }
++
++ handle = gen_handle(client);
++ msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_REGISTER,
++ handle);
++ MSM_BUS_DBG("%s:Client handle %d %s", __func__, handle,
++ client->pdata->name);
++exit_register_client:
++ mutex_unlock(&msm_bus_adhoc_lock);
++ return handle;
++}
++
++static int update_request_adhoc(uint32_t cl, unsigned int index)
++{
++ int i, ret = 0;
++ struct msm_bus_scale_pdata *pdata;
++ int lnode, src, curr, dest;
++ uint64_t req_clk, req_bw, curr_clk, curr_bw;
++ struct msm_bus_client *client;
++ const char *test_cl = "Null";
++ bool log_transaction = false;
++
++ mutex_lock(&msm_bus_adhoc_lock);
++
++ if (!cl) {
++ MSM_BUS_ERR("%s: Invalid client handle %d", __func__, cl);
++ ret = -ENXIO;
++ goto exit_update_request;
++ }
++
++ client = handle_list.cl_list[cl];
++ pdata = client->pdata;
++ if (!pdata) {
++ MSM_BUS_ERR("%s: Client data Null.[client didn't register]",
++ __func__);
++ ret = -ENXIO;
++ goto exit_update_request;
++ }
++
++ if (index >= pdata->num_usecases) {
++ MSM_BUS_ERR("Client %u passed invalid index: %d\n",
++ cl, index);
++ ret = -ENXIO;
++ goto exit_update_request;
++ }
++
++ if (client->curr == index) {
++ MSM_BUS_DBG("%s: Not updating client request idx %d unchanged",
++ __func__, index);
++ goto exit_update_request;
++ }
++
++ curr = client->curr;
++ client->curr = index;
++
++ if (!strcmp(test_cl, pdata->name))
++ log_transaction = true;
++
++ MSM_BUS_DBG("%s: cl: %u index: %d curr: %d num_paths: %d\n", __func__,
++ cl, index, client->curr, client->pdata->usecase->num_paths);
++
++ for (i = 0; i < pdata->usecase->num_paths; i++) {
++ src = client->pdata->usecase[index].vectors[i].src;
++ dest = client->pdata->usecase[index].vectors[i].dst;
++
++ lnode = client->src_pnode[i];
++ req_clk = client->pdata->usecase[index].vectors[i].ib;
++ req_bw = client->pdata->usecase[index].vectors[i].ab;
++ if (curr < 0) {
++ curr_clk = 0;
++ curr_bw = 0;
++ } else {
++ curr_clk = client->pdata->usecase[curr].vectors[i].ib;
++ curr_bw = client->pdata->usecase[curr].vectors[i].ab;
++ MSM_BUS_DBG("%s:ab: %llu ib: %llu\n", __func__,
++ curr_bw, curr_clk);
++ }
++
++ ret = update_path(src, dest, req_clk, req_bw,
++ curr_clk, curr_bw, lnode, pdata->active_only);
++
++ if (ret) {
++ MSM_BUS_ERR("%s: Update path failed! %d ctx %d\n",
++ __func__, ret, ACTIVE_CTX);
++ goto exit_update_request;
++ }
++
++ if (log_transaction)
++ getpath_debug(src, lnode, pdata->active_only);
++ }
++ msm_bus_dbg_client_data(client->pdata, index , cl);
++exit_update_request:
++ mutex_unlock(&msm_bus_adhoc_lock);
++ return ret;
++}
++
++/**
++ * msm_bus_arb_setops_adhoc() : Setup the bus arbitration ops
++ * @ arb_ops: pointer to the arb ops.
++ */
++void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops)
++{
++ arb_ops->register_client = register_client_adhoc;
++ arb_ops->update_request = update_request_adhoc;
++ arb_ops->unregister_client = unregister_client_adhoc;
++}
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_bimc.c
+@@ -0,0 +1,2112 @@
++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: BIMC: %s(): " fmt, __func__
++
++#include <linux/slab.h>
++#include <linux/io.h>
++#include "msm-bus-board.h"
++#include "msm_bus_core.h"
++#include "msm_bus_bimc.h"
++#include "msm_bus_adhoc.h"
++#include <trace/events/trace_msm_bus.h>
++
++enum msm_bus_bimc_slave_block {
++ SLAVE_BLOCK_RESERVED = 0,
++ SLAVE_BLOCK_SLAVE_WAY,
++ SLAVE_BLOCK_XPU,
++ SLAVE_BLOCK_ARBITER,
++ SLAVE_BLOCK_SCMO,
++};
++
++enum bke_sw {
++ BKE_OFF = 0,
++ BKE_ON = 1,
++};
++
++/* M_Generic */
++
++#define M_REG_BASE(b) ((b) + 0x00008000)
++
++#define M_COMPONENT_INFO_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000000)
++enum bimc_m_component_info {
++ M_COMPONENT_INFO_RMSK = 0xffffff,
++ M_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000,
++ M_COMPONENT_INFO_INSTANCE_SHFT = 0x10,
++ M_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00,
++ M_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8,
++ M_COMPONENT_INFO_TYPE_BMSK = 0xff,
++ M_COMPONENT_INFO_TYPE_SHFT = 0x0,
++};
++
++#define M_CONFIG_INFO_0_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000020)
++enum bimc_m_config_info_0 {
++ M_CONFIG_INFO_0_RMSK = 0xff00ffff,
++ M_CONFIG_INFO_0_SYNC_MODE_BMSK = 0xff000000,
++ M_CONFIG_INFO_0_SYNC_MODE_SHFT = 0x18,
++ M_CONFIG_INFO_0_CONNECTION_TYPE_BMSK = 0xff00,
++ M_CONFIG_INFO_0_CONNECTION_TYPE_SHFT = 0x8,
++ M_CONFIG_INFO_0_FUNC_BMSK = 0xff,
++ M_CONFIG_INFO_0_FUNC_SHFT = 0x0,
++};
++
++#define M_CONFIG_INFO_1_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000030)
++enum bimc_m_config_info_1 {
++ M_CONFIG_INFO_1_RMSK = 0xffffffff,
++ M_CONFIG_INFO_1_SWAY_CONNECTIVITY_BMSK = 0xffffffff,
++ M_CONFIG_INFO_1_SWAY_CONNECTIVITY_SHFT = 0x0,
++};
++
++#define M_CONFIG_INFO_2_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000040)
++enum bimc_m_config_info_2 {
++ M_CONFIG_INFO_2_RMSK = 0xffffffff,
++ M_CONFIG_INFO_2_M_DATA_WIDTH_BMSK = 0xffff0000,
++ M_CONFIG_INFO_2_M_DATA_WIDTH_SHFT = 0x10,
++ M_CONFIG_INFO_2_M_TID_WIDTH_BMSK = 0xff00,
++ M_CONFIG_INFO_2_M_TID_WIDTH_SHFT = 0x8,
++ M_CONFIG_INFO_2_M_MID_WIDTH_BMSK = 0xff,
++ M_CONFIG_INFO_2_M_MID_WIDTH_SHFT = 0x0,
++};
++
++#define M_CONFIG_INFO_3_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000050)
++enum bimc_m_config_info_3 {
++ M_CONFIG_INFO_3_RMSK = 0xffffffff,
++ M_CONFIG_INFO_3_RCH_DEPTH_BMSK = 0xff000000,
++ M_CONFIG_INFO_3_RCH_DEPTH_SHFT = 0x18,
++ M_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff0000,
++ M_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x10,
++ M_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff00,
++ M_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x8,
++ M_CONFIG_INFO_3_ACH_DEPTH_BMSK = 0xff,
++ M_CONFIG_INFO_3_ACH_DEPTH_SHFT = 0x0,
++};
++
++#define M_CONFIG_INFO_4_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000060)
++enum bimc_m_config_info_4 {
++ M_CONFIG_INFO_4_RMSK = 0xffff,
++ M_CONFIG_INFO_4_REORDER_BUF_DEPTH_BMSK = 0xff00,
++ M_CONFIG_INFO_4_REORDER_BUF_DEPTH_SHFT = 0x8,
++ M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_BMSK = 0xff,
++ M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_SHFT = 0x0,
++};
++
++#define M_CONFIG_INFO_5_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000070)
++enum bimc_m_config_info_5 {
++ M_CONFIG_INFO_5_RMSK = 0x111,
++ M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_BMSK = 0x100,
++ M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_SHFT = 0x8,
++ M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_BMSK = 0x10,
++ M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_SHFT = 0x4,
++ M_CONFIG_INFO_5_M2MP_PIPELINE_EN_BMSK = 0x1,
++ M_CONFIG_INFO_5_M2MP_PIPELINE_EN_SHFT = 0x0,
++};
++
++#define M_INT_STATUS_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000100)
++enum bimc_m_int_status {
++ M_INT_STATUS_RMSK = 0x3,
++};
++
++#define M_INT_CLR_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000108)
++enum bimc_m_int_clr {
++ M_INT_CLR_RMSK = 0x3,
++};
++
++#define M_INT_EN_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x0000010c)
++enum bimc_m_int_en {
++ M_INT_EN_RMSK = 0x3,
++};
++
++#define M_CLK_CTRL_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000200)
++enum bimc_m_clk_ctrl {
++ M_CLK_CTRL_RMSK = 0x3,
++ M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK = 0x2,
++ M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT = 0x1,
++ M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1,
++ M_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0,
++};
++
++#define M_MODE_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000210)
++enum bimc_m_mode {
++ M_MODE_RMSK = 0xf0000011,
++ M_MODE_WR_GATHER_BEATS_BMSK = 0xf0000000,
++ M_MODE_WR_GATHER_BEATS_SHFT = 0x1c,
++ M_MODE_NARROW_WR_BMSK = 0x10,
++ M_MODE_NARROW_WR_SHFT = 0x4,
++ M_MODE_ORDERING_MODEL_BMSK = 0x1,
++ M_MODE_ORDERING_MODEL_SHFT = 0x0,
++};
++
++#define M_PRIOLVL_OVERRIDE_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000230)
++enum bimc_m_priolvl_override {
++ M_PRIOLVL_OVERRIDE_RMSK = 0x301,
++ M_PRIOLVL_OVERRIDE_BMSK = 0x300,
++ M_PRIOLVL_OVERRIDE_SHFT = 0x8,
++ M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK = 0x1,
++ M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT = 0x0,
++};
++
++#define M_RD_CMD_OVERRIDE_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000240)
++enum bimc_m_read_command_override {
++ M_RD_CMD_OVERRIDE_RMSK = 0x3071f7f,
++ M_RD_CMD_OVERRIDE_AREQPRIO_BMSK = 0x3000000,
++ M_RD_CMD_OVERRIDE_AREQPRIO_SHFT = 0x18,
++ M_RD_CMD_OVERRIDE_AMEMTYPE_BMSK = 0x70000,
++ M_RD_CMD_OVERRIDE_AMEMTYPE_SHFT = 0x10,
++ M_RD_CMD_OVERRIDE_ATRANSIENT_BMSK = 0x1000,
++ M_RD_CMD_OVERRIDE_ATRANSIENT_SHFT = 0xc,
++ M_RD_CMD_OVERRIDE_ASHARED_BMSK = 0x800,
++ M_RD_CMD_OVERRIDE_ASHARED_SHFT = 0xb,
++ M_RD_CMD_OVERRIDE_AREDIRECT_BMSK = 0x400,
++ M_RD_CMD_OVERRIDE_AREDIRECT_SHFT = 0xa,
++ M_RD_CMD_OVERRIDE_AOOO_BMSK = 0x200,
++ M_RD_CMD_OVERRIDE_AOOO_SHFT = 0x9,
++ M_RD_CMD_OVERRIDE_AINNERSHARED_BMSK = 0x100,
++ M_RD_CMD_OVERRIDE_AINNERSHARED_SHFT = 0x8,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK = 0x40,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT = 0x6,
++ M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK = 0x20,
++ M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT = 0x5,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK = 0x10,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT = 0x4,
++ M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK = 0x8,
++ M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT = 0x3,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK = 0x4,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT = 0x2,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK = 0x2,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT = 0x1,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK = 0x1,
++ M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT = 0x0,
++};
++
++#define M_WR_CMD_OVERRIDE_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000250)
++enum bimc_m_write_command_override {
++ M_WR_CMD_OVERRIDE_RMSK = 0x3071f7f,
++ M_WR_CMD_OVERRIDE_AREQPRIO_BMSK = 0x3000000,
++ M_WR_CMD_OVERRIDE_AREQPRIO_SHFT = 0x18,
++ M_WR_CMD_OVERRIDE_AMEMTYPE_BMSK = 0x70000,
++ M_WR_CMD_OVERRIDE_AMEMTYPE_SHFT = 0x10,
++ M_WR_CMD_OVERRIDE_ATRANSIENT_BMSK = 0x1000,
++ M_WR_CMD_OVERRIDE_ATRANSIENT_SHFT = 0xc,
++ M_WR_CMD_OVERRIDE_ASHARED_BMSK = 0x800,
++ M_WR_CMD_OVERRIDE_ASHARED_SHFT = 0xb,
++ M_WR_CMD_OVERRIDE_AREDIRECT_BMSK = 0x400,
++ M_WR_CMD_OVERRIDE_AREDIRECT_SHFT = 0xa,
++ M_WR_CMD_OVERRIDE_AOOO_BMSK = 0x200,
++ M_WR_CMD_OVERRIDE_AOOO_SHFT = 0x9,
++ M_WR_CMD_OVERRIDE_AINNERSHARED_BMSK = 0x100,
++ M_WR_CMD_OVERRIDE_AINNERSHARED_SHFT = 0x8,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK = 0x40,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT = 0x6,
++ M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK = 0x20,
++ M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT = 0x5,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK = 0x10,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT = 0x4,
++ M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK = 0x8,
++ M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT = 0x3,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK = 0x4,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT = 0x2,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK = 0x2,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT = 0x1,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK = 0x1,
++ M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT = 0x0,
++};
++
++#define M_BKE_EN_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000300)
++enum bimc_m_bke_en {
++ M_BKE_EN_RMSK = 0x1,
++ M_BKE_EN_EN_BMSK = 0x1,
++ M_BKE_EN_EN_SHFT = 0x0,
++};
++
++/* Grant Period registers */
++#define M_BKE_GP_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000304)
++enum bimc_m_bke_grant_period {
++ M_BKE_GP_RMSK = 0x3ff,
++ M_BKE_GP_GP_BMSK = 0x3ff,
++ M_BKE_GP_GP_SHFT = 0x0,
++};
++
++/* Grant count register.
++ * The Grant count register represents a signed 16 bit
++ * value, range 0-0x7fff
++ */
++#define M_BKE_GC_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000308)
++enum bimc_m_bke_grant_count {
++ M_BKE_GC_RMSK = 0xffff,
++ M_BKE_GC_GC_BMSK = 0xffff,
++ M_BKE_GC_GC_SHFT = 0x0,
++};
++
++/* Threshold High Registers */
++#define M_BKE_THH_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000320)
++enum bimc_m_bke_thresh_high {
++ M_BKE_THH_RMSK = 0xffff,
++ M_BKE_THH_THRESH_BMSK = 0xffff,
++ M_BKE_THH_THRESH_SHFT = 0x0,
++};
++
++/* Threshold Medium Registers */
++#define M_BKE_THM_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000324)
++enum bimc_m_bke_thresh_medium {
++ M_BKE_THM_RMSK = 0xffff,
++ M_BKE_THM_THRESH_BMSK = 0xffff,
++ M_BKE_THM_THRESH_SHFT = 0x0,
++};
++
++/* Threshold Low Registers */
++#define M_BKE_THL_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000328)
++enum bimc_m_bke_thresh_low {
++ M_BKE_THL_RMSK = 0xffff,
++ M_BKE_THL_THRESH_BMSK = 0xffff,
++ M_BKE_THL_THRESH_SHFT = 0x0,
++};
++
++#define M_BKE_HEALTH_0_CONFIG_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000340)
++enum bimc_m_bke_health_0 {
++ M_BKE_HEALTH_0_CONFIG_RMSK = 0x80000303,
++ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK = 0x80000000,
++ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT = 0x1f,
++ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK = 0x300,
++ M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT = 0x8,
++ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK = 0x3,
++ M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT = 0x0,
++};
++
++#define M_BKE_HEALTH_1_CONFIG_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000344)
++enum bimc_m_bke_health_1 {
++ M_BKE_HEALTH_1_CONFIG_RMSK = 0x80000303,
++ M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_BMSK = 0x80000000,
++ M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_SHFT = 0x1f,
++ M_BKE_HEALTH_1_CONFIG_AREQPRIO_BMSK = 0x300,
++ M_BKE_HEALTH_1_CONFIG_AREQPRIO_SHFT = 0x8,
++ M_BKE_HEALTH_1_CONFIG_PRIOLVL_BMSK = 0x3,
++ M_BKE_HEALTH_1_CONFIG_PRIOLVL_SHFT = 0x0,
++};
++
++#define M_BKE_HEALTH_2_CONFIG_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000348)
++enum bimc_m_bke_health_2 {
++ M_BKE_HEALTH_2_CONFIG_RMSK = 0x80000303,
++ M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_BMSK = 0x80000000,
++ M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_SHFT = 0x1f,
++ M_BKE_HEALTH_2_CONFIG_AREQPRIO_BMSK = 0x300,
++ M_BKE_HEALTH_2_CONFIG_AREQPRIO_SHFT = 0x8,
++ M_BKE_HEALTH_2_CONFIG_PRIOLVL_BMSK = 0x3,
++ M_BKE_HEALTH_2_CONFIG_PRIOLVL_SHFT = 0x0,
++};
++
++#define M_BKE_HEALTH_3_CONFIG_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x0000034c)
++enum bimc_m_bke_health_3 {
++ M_BKE_HEALTH_3_CONFIG_RMSK = 0x303,
++ M_BKE_HEALTH_3_CONFIG_AREQPRIO_BMSK = 0x300,
++ M_BKE_HEALTH_3_CONFIG_AREQPRIO_SHFT = 0x8,
++ M_BKE_HEALTH_3_CONFIG_PRIOLVL_BMSK = 0x3,
++ M_BKE_HEALTH_3_CONFIG_PRIOLVL_SHFT = 0x0,
++};
++
++#define M_BUF_STATUS_ADDR(b, n) \
++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000400)
++enum bimc_m_buf_status {
++ M_BUF_STATUS_RMSK = 0xf03f030,
++ M_BUF_STATUS_RCH_DATA_WR_FULL_BMSK = 0x8000000,
++ M_BUF_STATUS_RCH_DATA_WR_FULL_SHFT = 0x1b,
++ M_BUF_STATUS_RCH_DATA_WR_EMPTY_BMSK = 0x4000000,
++ M_BUF_STATUS_RCH_DATA_WR_EMPTY_SHFT = 0x1a,
++ M_BUF_STATUS_RCH_CTRL_WR_FULL_BMSK = 0x2000000,
++ M_BUF_STATUS_RCH_CTRL_WR_FULL_SHFT = 0x19,
++ M_BUF_STATUS_RCH_CTRL_WR_EMPTY_BMSK = 0x1000000,
++ M_BUF_STATUS_RCH_CTRL_WR_EMPTY_SHFT = 0x18,
++ M_BUF_STATUS_BCH_WR_FULL_BMSK = 0x20000,
++ M_BUF_STATUS_BCH_WR_FULL_SHFT = 0x11,
++ M_BUF_STATUS_BCH_WR_EMPTY_BMSK = 0x10000,
++ M_BUF_STATUS_BCH_WR_EMPTY_SHFT = 0x10,
++ M_BUF_STATUS_WCH_DATA_RD_FULL_BMSK = 0x8000,
++ M_BUF_STATUS_WCH_DATA_RD_FULL_SHFT = 0xf,
++ M_BUF_STATUS_WCH_DATA_RD_EMPTY_BMSK = 0x4000,
++ M_BUF_STATUS_WCH_DATA_RD_EMPTY_SHFT = 0xe,
++ M_BUF_STATUS_WCH_CTRL_RD_FULL_BMSK = 0x2000,
++ M_BUF_STATUS_WCH_CTRL_RD_FULL_SHFT = 0xd,
++ M_BUF_STATUS_WCH_CTRL_RD_EMPTY_BMSK = 0x1000,
++ M_BUF_STATUS_WCH_CTRL_RD_EMPTY_SHFT = 0xc,
++ M_BUF_STATUS_ACH_RD_FULL_BMSK = 0x20,
++ M_BUF_STATUS_ACH_RD_FULL_SHFT = 0x5,
++ M_BUF_STATUS_ACH_RD_EMPTY_BMSK = 0x10,
++ M_BUF_STATUS_ACH_RD_EMPTY_SHFT = 0x4,
++};
++/*BIMC Generic */
++
++#define S_REG_BASE(b) ((b) + 0x00048000)
++
++#define S_COMPONENT_INFO_ADDR(b, n) \
++ (S_REG_BASE(b) + (0x8000 * (n)) + 0x00000000)
++enum bimc_s_component_info {
++ S_COMPONENT_INFO_RMSK = 0xffffff,
++ S_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000,
++ S_COMPONENT_INFO_INSTANCE_SHFT = 0x10,
++ S_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00,
++ S_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8,
++ S_COMPONENT_INFO_TYPE_BMSK = 0xff,
++ S_COMPONENT_INFO_TYPE_SHFT = 0x0,
++};
++
++#define S_HW_INFO_ADDR(b, n) \
++ (S_REG_BASE(b) + (0x80000 * (n)) + 0x00000010)
++enum bimc_s_hw_info {
++ S_HW_INFO_RMSK = 0xffffffff,
++ S_HW_INFO_MAJOR_BMSK = 0xff000000,
++ S_HW_INFO_MAJOR_SHFT = 0x18,
++ S_HW_INFO_BRANCH_BMSK = 0xff0000,
++ S_HW_INFO_BRANCH_SHFT = 0x10,
++ S_HW_INFO_MINOR_BMSK = 0xff00,
++ S_HW_INFO_MINOR_SHFT = 0x8,
++ S_HW_INFO_ECO_BMSK = 0xff,
++ S_HW_INFO_ECO_SHFT = 0x0,
++};
++
++
++/* S_SCMO_GENERIC */
++
++#define S_SCMO_REG_BASE(b) ((b) + 0x00048000)
++
++#define S_SCMO_CONFIG_INFO_0_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
++enum bimc_s_scmo_config_info_0 {
++ S_SCMO_CONFIG_INFO_0_RMSK = 0xffffffff,
++ S_SCMO_CONFIG_INFO_0_DATA_WIDTH_BMSK = 0xffff0000,
++ S_SCMO_CONFIG_INFO_0_DATA_WIDTH_SHFT = 0x10,
++ S_SCMO_CONFIG_INFO_0_TID_WIDTH_BMSK = 0xff00,
++ S_SCMO_CONFIG_INFO_0_TID_WIDTH_SHFT = 0x8,
++ S_SCMO_CONFIG_INFO_0_MID_WIDTH_BMSK = 0xff,
++ S_SCMO_CONFIG_INFO_0_MID_WIDTH_SHFT = 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_1_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
++enum bimc_s_scmo_config_info_1 {
++ S_SCMO_CONFIG_INFO_1_RMSK = 0xffffffff,
++ S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff,
++ S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_2_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000040)
++enum bimc_s_scmo_config_info_2 {
++ S_SCMO_CONFIG_INFO_2_RMSK = 0xff00ff,
++ S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_BMSK = 0xff0000,
++ S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_SHFT = 0x10,
++ S_SCMO_CONFIG_INFO_2_VMID_WIDTH_BMSK = 0xff,
++ S_SCMO_CONFIG_INFO_2_VMID_WIDTH_SHFT = 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_3_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000050)
++enum bimc_s_scmo_config_info_3 {
++ S_SCMO_CONFIG_INFO_3_RMSK = 0xffffffff,
++ S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_BMSK = 0xff000000,
++ S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_SHFT = 0x18,
++ S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_BMSK = 0xff0000,
++ S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_SHFT = 0x10,
++ S_SCMO_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff00,
++ S_SCMO_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x8,
++ S_SCMO_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff,
++ S_SCMO_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_4_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000060)
++enum bimc_s_scmo_config_info_4 {
++ S_SCMO_CONFIG_INFO_4_RMSK = 0xffff,
++ S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_BMSK = 0xff00,
++ S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_SHFT = 0x8,
++ S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_BMSK = 0xff,
++ S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_SHFT = 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_5_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000070)
++enum bimc_s_scmo_config_info_5 {
++ S_SCMO_CONFIG_INFO_5_RMSK = 0xffff,
++ S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_BMSK = 0xff00,
++ S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_SHFT = 0x8,
++ S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_BMSK = 0xff,
++ S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_SHFT = 0x0,
++};
++
++#define S_SCMO_CONFIG_INFO_6_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000080)
++enum bimc_s_scmo_config_info_6 {
++ S_SCMO_CONFIG_INFO_6_RMSK = 0x1111,
++ S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_BMSK = 0x1000,
++ S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_SHFT = 0xc,
++ S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_BMSK = 0x100,
++ S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_SHFT = 0x8,
++ S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_BMSK = 0x10,
++ S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_SHFT = 0x4,
++ S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_BMSK = 0x1,
++ S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_SHFT = 0x0,
++};
++
++#define S_SCMO_INT_STATUS_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000100)
++enum bimc_s_scmo_int_status {
++ S_SCMO_INT_STATUS_RMSK = 0x1,
++ S_SCMO_INT_STATUS_ERR_OCCURED_BMSK = 0x1,
++ S_SCMO_INT_STATUS_ERR_OCCURED_SHFT = 0x0,
++};
++
++#define S_SCMO_INT_CLR_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000108)
++enum bimc_s_scmo_int_clr {
++ S_SCMO_INT_CLR_RMSK = 0x1,
++ S_SCMO_INT_CLR_IRQ_CLR_BMSK = 0x1,
++ S_SCMO_INT_CLR_IRQ_CLR_SHFT = 0x0,
++};
++
++#define S_SCMO_INT_EN_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c)
++enum bimc_s_scmo_int_en {
++ S_SCMO_INT_EN_RMSK = 0x1,
++ S_SCMO_INT_EN_IRQ_EN_BMSK = 0x1,
++ S_SCMO_INT_EN_IRQ_EN_SHFT = 0x0,
++};
++
++#define S_SCMO_ESYN_ADDR_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000120)
++enum bimc_s_scmo_esyn_addr {
++ S_SCMO_ESYN_ADDR_RMSK = 0xffffffff,
++ S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_BMSK = 0xffffffff,
++ S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_SHFT = 0x0,
++};
++
++#define S_SCMO_ESYN_APACKET_0_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000128)
++enum bimc_s_scmo_esyn_apacket_0 {
++ S_SCMO_ESYN_APACKET_0_RMSK = 0xff1fffff,
++ S_SCMO_ESYN_APACKET_0_ERR_ATID_BMSK = 0xff000000,
++ S_SCMO_ESYN_APACKET_0_ERR_ATID_SHFT = 0x18,
++ S_SCMO_ESYN_APACKET_0_ERR_AVMID_BMSK = 0x1f0000,
++ S_SCMO_ESYN_APACKET_0_ERR_AVMID_SHFT = 0x10,
++ S_SCMO_ESYN_APACKET_0_ERR_AMID_BMSK = 0xffff,
++ S_SCMO_ESYN_APACKET_0_ERR_AMID_SHFT = 0x0,
++};
++
++#define S_SCMO_ESYN_APACKET_1_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000012c)
++enum bimc_s_scmo_esyn_apacket_1 {
++ S_SCMO_ESYN_APACKET_1_RMSK = 0x10ff117,
++ S_SCMO_ESYN_APACKET_1_ERR_CODE_BMSK = 0x1000000,
++ S_SCMO_ESYN_APACKET_1_ERR_CODE_SHFT = 0x18,
++ S_SCMO_ESYN_APACKET_1_ERR_ALEN_BMSK = 0xf0000,
++ S_SCMO_ESYN_APACKET_1_ERR_ALEN_SHFT = 0x10,
++ S_SCMO_ESYN_APACKET_1_ERR_ASIZE_BMSK = 0xe000,
++ S_SCMO_ESYN_APACKET_1_ERR_ASIZE_SHFT = 0xd,
++ S_SCMO_ESYN_APACKET_1_ERR_ABURST_BMSK = 0x1000,
++ S_SCMO_ESYN_APACKET_1_ERR_ABURST_SHFT = 0xc,
++ S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_BMSK = 0x100,
++ S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_SHFT = 0x8,
++ S_SCMO_ESYN_APACKET_1_ERR_APRONTS_BMSK = 0x10,
++ S_SCMO_ESYN_APACKET_1_ERR_APRONTS_SHFT = 0x4,
++ S_SCMO_ESYN_APACKET_1_ERR_AOOORD_BMSK = 0x4,
++ S_SCMO_ESYN_APACKET_1_ERR_AOOORD_SHFT = 0x2,
++ S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_BMSK = 0x2,
++ S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_SHFT = 0x1,
++ S_SCMO_ESYN_APACKET_1_ERR_AWRITE_BMSK = 0x1,
++ S_SCMO_ESYN_APACKET_1_ERR_AWRITE_SHFT = 0x0,
++};
++
++#define S_SCMO_CLK_CTRL_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
++enum bimc_s_scmo_clk_ctrl {
++ S_SCMO_CLK_CTRL_RMSK = 0xffff1111,
++ S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_BMSK = 0x10000,
++ S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_SHFT = 0x10,
++ S_SCMO_CLK_CTRL_RCH_CG_EN_BMSK = 0x1000,
++ S_SCMO_CLK_CTRL_RCH_CG_EN_SHFT = 0xc,
++ S_SCMO_CLK_CTRL_FLUSH_CG_EN_BMSK = 0x100,
++ S_SCMO_CLK_CTRL_FLUSH_CG_EN_SHFT = 0x8,
++ S_SCMO_CLK_CTRL_WCH_CG_EN_BMSK = 0x10,
++ S_SCMO_CLK_CTRL_WCH_CG_EN_SHFT = 0x4,
++ S_SCMO_CLK_CTRL_ACH_CG_EN_BMSK = 0x1,
++ S_SCMO_CLK_CTRL_ACH_CG_EN_SHFT = 0x0,
++};
++
++#define S_SCMO_SLV_INTERLEAVE_CFG_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000400)
++enum bimc_s_scmo_slv_interleave_cfg {
++ S_SCMO_SLV_INTERLEAVE_CFG_RMSK = 0xff,
++ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_BMSK = 0x10,
++ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_SHFT = 0x4,
++ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_BMSK = 0x1,
++ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_SHFT = 0x0,
++};
++
++#define S_SCMO_ADDR_BASE_CSn_ADDR(b, n, o) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000410 + 0x4 * (o))
++enum bimc_s_scmo_addr_base_csn {
++ S_SCMO_ADDR_BASE_CSn_RMSK = 0xffff,
++ S_SCMO_ADDR_BASE_CSn_MAXn = 1,
++ S_SCMO_ADDR_BASE_CSn_ADDR_BASE_BMSK = 0xfc,
++ S_SCMO_ADDR_BASE_CSn_ADDR_BASE_SHFT = 0x2,
++};
++
++#define S_SCMO_ADDR_MAP_CSn_ADDR(b, n, o) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000420 + 0x4 * (o))
++enum bimc_s_scmo_addr_map_csn {
++ S_SCMO_ADDR_MAP_CSn_RMSK = 0xffff,
++ S_SCMO_ADDR_MAP_CSn_MAXn = 1,
++ S_SCMO_ADDR_MAP_CSn_RANK_EN_BMSK = 0x8000,
++ S_SCMO_ADDR_MAP_CSn_RANK_EN_SHFT = 0xf,
++ S_SCMO_ADDR_MAP_CSn_ADDR_MODE_BMSK = 0x1000,
++ S_SCMO_ADDR_MAP_CSn_ADDR_MODE_SHFT = 0xc,
++ S_SCMO_ADDR_MAP_CSn_BANK_SIZE_BMSK = 0x100,
++ S_SCMO_ADDR_MAP_CSn_BANK_SIZE_SHFT = 0x8,
++ S_SCMO_ADDR_MAP_CSn_ROW_SIZE_BMSK = 0x30,
++ S_SCMO_ADDR_MAP_CSn_ROW_SIZE_SHFT = 0x4,
++ S_SCMO_ADDR_MAP_CSn_COL_SIZE_BMSK = 0x3,
++ S_SCMO_ADDR_MAP_CSn_COL_SIZE_SHFT = 0x0,
++};
++
++#define S_SCMO_ADDR_MASK_CSn_ADDR(b, n, o) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000430 + 0x4 * (0))
++enum bimc_s_scmo_addr_mask_csn {
++ S_SCMO_ADDR_MASK_CSn_RMSK = 0xffff,
++ S_SCMO_ADDR_MASK_CSn_MAXn = 1,
++ S_SCMO_ADDR_MASK_CSn_ADDR_MASK_BMSK = 0xfc,
++ S_SCMO_ADDR_MASK_CSn_ADDR_MASK_SHFT = 0x2,
++};
++
++#define S_SCMO_SLV_STATUS_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000450)
++enum bimc_s_scmo_slv_status {
++ S_SCMO_SLV_STATUS_RMSK = 0xff3,
++ S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_BMSK = 0xff0,
++ S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_SHFT = 0x4,
++ S_SCMO_SLV_STATUS_SLAVE_IDLE_BMSK = 0x3,
++ S_SCMO_SLV_STATUS_SLAVE_IDLE_SHFT = 0x0,
++};
++
++#define S_SCMO_CMD_BUF_CFG_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000500)
++enum bimc_s_scmo_cmd_buf_cfg {
++ S_SCMO_CMD_BUF_CFG_RMSK = 0xf1f,
++ S_SCMO_CMD_BUF_CFG_CMD_ORDERING_BMSK = 0x300,
++ S_SCMO_CMD_BUF_CFG_CMD_ORDERING_SHFT = 0x8,
++ S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_BMSK = 0x10,
++ S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_SHFT = 0x4,
++ S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_BMSK = 0x7,
++ S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_SHFT = 0x0,
++};
++
++#define S_SCM_CMD_BUF_STATUS_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000520)
++enum bimc_s_scm_cmd_buf_status {
++ S_SCMO_CMD_BUF_STATUS_RMSK = 0x77,
++ S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_BMSK = 0x70,
++ S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_SHFT = 0x4,
++ S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_BMSK = 0x7,
++ S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_SHFT = 0x0,
++};
++
++#define S_SCMO_RCH_SEL_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000540)
++enum bimc_s_scmo_rch_sel {
++ S_SCMO_RCH_SEL_RMSK = 0xffffffff,
++ S_SCMO_CMD_BUF_STATUS_RCH_PORTS_BMSK = 0xffffffff,
++ S_SCMO_CMD_BUF_STATUS_RCH_PORTS_SHFT = 0x0,
++};
++
++#define S_SCMO_RCH_BKPR_CFG_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000544)
++enum bimc_s_scmo_rch_bkpr_cfg {
++ S_SCMO_RCH_BKPR_CFG_RMSK = 0xffffffff,
++ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_BMSK = 0x3f000000,
++ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_SHFT = 0x18,
++ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_BMSK = 0x3f0000,
++ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_SHFT = 0x10,
++ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_BMSK = 0x3f00,
++ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_SHFT = 0x8,
++ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_BMSK = 0x3f,
++ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_SHFT = 0x0,
++};
++
++#define S_SCMO_RCH_STATUS_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000560)
++enum bimc_s_scmo_rch_status {
++ S_SCMO_RCH_STATUS_RMSK = 0x33333,
++ S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_BMSK = 0x20000,
++ S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_SHFT = 0x11,
++ S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_BMSK = 0x10000,
++ S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_SHFT = 0x10,
++ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_BMSK = 0x2000,
++ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_SHFT = 0xd,
++ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_BMSK = 0x1000,
++ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_SHFT = 0xc,
++ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_BMSK = 0x200,
++ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_SHFT = 0x9,
++ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_BMSK = 0x100,
++ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_SHFT = 0x8,
++ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_BMSK = 0x20,
++ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_SHFT = 0x5,
++ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_BMSK = 0x10,
++ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_SHFT = 0x4,
++ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_BMSK = 0x2,
++ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_SHFT = 0x1,
++ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_BMSK = 0x1,
++ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_SHFT = 0x0,
++};
++
++#define S_SCMO_WCH_BUF_CFG_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000580)
++enum bimc_s_scmo_wch_buf_cfg {
++ S_SCMO_WCH_BUF_CFG_RMSK = 0xff,
++ S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_BMSK = 0x10,
++ S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_SHFT = 0x4,
++ S_SCMO_WCH_BUF_CFG_COALESCE_EN_BMSK = 0x1,
++ S_SCMO_WCH_BUF_CFG_COALESCE_EN_SHFT = 0x0,
++};
++
++#define S_SCMO_WCH_STATUS_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005a0)
++enum bimc_s_scmo_wch_status {
++ S_SCMO_WCH_STATUS_RMSK = 0x333,
++ S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_BMSK = 0x200,
++ S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_SHFT = 0x9,
++ S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_BMSK = 0x100,
++ S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_SHFT = 0x8,
++ S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_BMSK = 0x20,
++ S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_SHFT = 0x5,
++ S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_BMSK = 0x10,
++ S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_SHFT = 0x4,
++ S_SCMO_WCH_STATUS_WBUF_FULL_BMSK = 0x2,
++ S_SCMO_WCH_STATUS_WBUF_FULL_SHFT = 0x1,
++ S_SCMO_WCH_STATUS_WBUF_EMPTY_BMSK = 0x1,
++ S_SCMO_WCH_STATUS_WBUF_EMPTY_SHFT = 0x0,
++};
++
++#define S_SCMO_FLUSH_CFG_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c0)
++enum bimc_s_scmo_flush_cfg {
++ S_SCMO_FLUSH_CFG_RMSK = 0xffffffff,
++ S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_BMSK = 0x10000000,
++ S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_SHFT = 0x1c,
++ S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_BMSK = 0x3ff0000,
++ S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_SHFT = 0x10,
++ S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_BMSK = 0xf00,
++ S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_SHFT = 0x8,
++ S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_BMSK = 0xf,
++ S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_SHFT = 0x0,
++};
++
++#define S_SCMO_FLUSH_CMD_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c4)
++enum bimc_s_scmo_flush_cmd {
++ S_SCMO_FLUSH_CMD_RMSK = 0xf,
++ S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_BMSK = 0x3,
++ S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_SHFT = 0x0,
++};
++
++#define S_SCMO_CMD_OPT_CFG0_ADDR(b, n) \
++ (S_SCM0_REG_BASE(b) + (0x8000 * (n)) + 0x00000700)
++enum bimc_s_scmo_cmd_opt_cfg0 {
++ S_SCMO_CMD_OPT_CFG0_RMSK = 0xffffff,
++ S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_BMSK = 0x100000,
++ S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_SHFT = 0x14,
++ S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_BMSK = 0x10000,
++ S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_SHFT = 0x10,
++ S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_BMSK = 0x1000,
++ S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_SHFT = 0xc,
++ S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_BMSK = 0x100,
++ S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_SHFT = 0x8,
++ S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_BMSK = 0x10,
++ S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_SHFT = 0x4,
++ S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_BMSK = 0x1,
++ S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_SHFT = 0x0,
++};
++
++#define S_SCMO_CMD_OPT_CFG1_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000704)
++enum bimc_s_scmo_cmd_opt_cfg1 {
++ S_SCMO_CMD_OPT_CFG1_RMSK = 0xffffffff,
++ S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_BMSK = 0x1f000000,
++ S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_SHFT = 0x18,
++ S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_BMSK = 0x1f0000,
++ S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_SHFT = 0x10,
++ S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_BMSK = 0x1f00,
++ S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_SHFT = 0x8,
++ S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_BMSK = 0x1f,
++ S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_SHFT = 0x0,
++};
++
++#define S_SCMO_CMD_OPT_CFG2_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000708)
++enum bimc_s_scmo_cmd_opt_cfg2 {
++ S_SCMO_CMD_OPT_CFG2_RMSK = 0xff,
++ S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_BMSK = 0xf,
++ S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_SHFT = 0x0,
++};
++
++#define S_SCMO_CMD_OPT_CFG3_ADDR(b, n) \
++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000070c)
++enum bimc_s_scmo_cmd_opt_cfg3 {
++ S_SCMO_CMD_OPT_CFG3_RMSK = 0xff,
++ S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_BMSK = 0xf,
++ S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_SHFT = 0x0,
++};
++
++/* S_SWAY_GENERIC */
++#define S_SWAY_REG_BASE(b) ((b) + 0x00048000)
++
++#define S_SWAY_CONFIG_INFO_0_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
++enum bimc_s_sway_config_info_0 {
++ S_SWAY_CONFIG_INFO_0_RMSK = 0xff0000ff,
++ S_SWAY_CONFIG_INFO_0_SYNC_MODE_BMSK = 0xff000000,
++ S_SWAY_CONFIG_INFO_0_SYNC_MODE_SHFT = 0x18,
++ S_SWAY_CONFIG_INFO_0_FUNC_BMSK = 0xff,
++ S_SWAY_CONFIG_INFO_0_FUNC_SHFT = 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_1_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
++enum bimc_s_sway_config_info_1 {
++ S_SWAY_CONFIG_INFO_1_RMSK = 0xffffffff,
++ S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff,
++ S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_2_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000040)
++enum bimc_s_sway_config_info_2 {
++ S_SWAY_CONFIG_INFO_2_RMSK = 0xffff0000,
++ S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_BMSK = 0xffff0000,
++ S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_SHFT = 0x10,
++};
++
++#define S_SWAY_CONFIG_INFO_3_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000050)
++enum bimc_s_sway_config_info_3 {
++ S_SWAY_CONFIG_INFO_3_RMSK = 0xffffffff,
++ S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_BMSK = 0xff000000,
++ S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_SHFT = 0x18,
++ S_SWAY_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff0000,
++ S_SWAY_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x10,
++ S_SWAY_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff,
++ S_SWAY_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_4_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000060)
++enum bimc_s_sway_config_info_4 {
++ S_SWAY_CONFIG_INFO_4_RMSK = 0x800000ff,
++ S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_BMSK = 0x80000000,
++ S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_SHFT = 0x1f,
++ S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_BMSK = 0xff,
++ S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_SHFT = 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_5_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000070)
++enum bimc_s_sway_config_info_5 {
++ S_SWAY_CONFIG_INFO_5_RMSK = 0x800000ff,
++ S_SWAY_CONFIG_INFO_5_QCH_EN_BMSK = 0x80000000,
++ S_SWAY_CONFIG_INFO_5_QCH_EN_SHFT = 0x1f,
++ S_SWAY_CONFIG_INFO_5_QCH_DEPTH_BMSK = 0xff,
++ S_SWAY_CONFIG_INFO_5_QCH_DEPTH_SHFT = 0x0,
++};
++
++#define S_SWAY_CONFIG_INFO_6_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000080)
++enum bimc_s_sway_config_info_6 {
++ S_SWAY_CONFIG_INFO_6_RMSK = 0x1,
++ S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_BMSK = 0x1,
++ S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_SHFT = 0x0,
++};
++
++#define S_SWAY_INT_STATUS_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000100)
++enum bimc_s_sway_int_status {
++ S_SWAY_INT_STATUS_RMSK = 0x3,
++ S_SWAY_INT_STATUS_RFU_BMSK = 0x3,
++ S_SWAY_INT_STATUS_RFU_SHFT = 0x0,
++};
++
++#define S_SWAY_INT_CLR_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000108)
++enum bimc_s_sway_int_clr {
++ S_SWAY_INT_CLR_RMSK = 0x3,
++ S_SWAY_INT_CLR_RFU_BMSK = 0x3,
++ S_SWAY_INT_CLR_RFU_SHFT = 0x0,
++};
++
++
++#define S_SWAY_INT_EN_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c)
++enum bimc_s_sway_int_en {
++ S_SWAY_INT_EN_RMSK = 0x3,
++ S_SWAY_INT_EN_RFU_BMSK = 0x3,
++ S_SWAY_INT_EN_RFU_SHFT = 0x0,
++};
++
++#define S_SWAY_CLK_CTRL_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
++enum bimc_s_sway_clk_ctrl {
++ S_SWAY_CLK_CTRL_RMSK = 0x3,
++ S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK = 0x2,
++ S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT = 0x1,
++ S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1,
++ S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0,
++};
++
++#define S_SWAY_RCH_SEL_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000210)
++enum bimc_s_sway_rch_sel {
++ S_SWAY_RCH_SEL_RMSK = 0x7f,
++ S_SWAY_RCH_SEL_UNUSED_BMSK = 0x7f,
++ S_SWAY_RCH_SEL_UNUSED_SHFT = 0x0,
++};
++
++
++#define S_SWAY_MAX_OUTSTANDING_REQS_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000220)
++enum bimc_s_sway_max_outstanding_reqs {
++ S_SWAY_MAX_OUTSTANDING_REQS_RMSK = 0xffff,
++ S_SWAY_MAX_OUTSTANDING_REQS_WRITE_BMSK = 0xff00,
++ S_SWAY_MAX_OUTSTANDING_REQS_WRITE_SHFT = 0x8,
++ S_SWAY_MAX_OUTSTANDING_REQS_READ_BMSK = 0xff,
++ S_SWAY_MAX_OUTSTANDING_REQS_READ_SHFT = 0x0,
++};
++
++
++#define S_SWAY_BUF_STATUS_0_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000400)
++enum bimc_s_sway_buf_status_0 {
++ S_SWAY_BUF_STATUS_0_RMSK = 0xf0300f03,
++ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_BMSK = 0x80000000,
++ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_SHFT = 0x1f,
++ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_BMSK = 0x40000000,
++ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_SHFT = 0x1e,
++ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_BMSK = 0x20000000,
++ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_SHFT = 0x1d,
++ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_BMSK = 0x10000000,
++ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_SHFT = 0x1c,
++ S_SWAY_BUF_STATUS_0_BCH_RD_FULL_BMSK = 0x200000,
++ S_SWAY_BUF_STATUS_0_BCH_RD_FULL_SHFT = 0x15,
++ S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_BMSK = 0x100000,
++ S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_SHFT = 0x14,
++ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_BMSK = 0x800,
++ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_SHFT = 0xb,
++ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_BMSK = 0x400,
++ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_SHFT = 0xa,
++ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_BMSK = 0x200,
++ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_SHFT = 0x9,
++ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_BMSK = 0x100,
++ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_SHFT = 0x8,
++ S_SWAY_BUF_STATUS_0_ACH_WR_FULL_BMSK = 0x2,
++ S_SWAY_BUF_STATUS_0_ACH_WR_FULL_SHFT = 0x1,
++ S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_BMSK = 0x1,
++ S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_SHFT = 0x0,
++};
++
++#define S_SWAY_BUF_STATUS_1_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000410)
++enum bimc_s_sway_buf_status_1 {
++ S_SWAY_BUF_STATUS_1_RMSK = 0xf0,
++ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_BMSK = 0x80,
++ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_SHFT = 0x7,
++ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_BMSK = 0x40,
++ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_SHFT = 0x6,
++ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_BMSK = 0x20,
++ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_SHFT = 0x5,
++ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_BMSK = 0x10,
++ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_SHFT = 0x4,
++};
++
++#define S_SWAY_BUF_STATUS_2_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000420)
++enum bimc_s_sway_buf_status_2 {
++ S_SWAY_BUF_STATUS_2_RMSK = 0x30,
++ S_SWAY_BUF_STATUS_2_QCH_RD_FULL_BMSK = 0x20,
++ S_SWAY_BUF_STATUS_2_QCH_RD_FULL_SHFT = 0x5,
++ S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_BMSK = 0x10,
++ S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_SHFT = 0x4,
++};
++
++/* S_ARB_GENERIC */
++
++#define S_ARB_REG_BASE(b) ((b) + 0x00049000)
++
++#define S_ARB_COMPONENT_INFO_ADDR(b, n) \
++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000000)
++enum bimc_s_arb_component_info {
++ S_ARB_COMPONENT_INFO_RMSK = 0xffffff,
++ S_ARB_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000,
++ S_ARB_COMPONENT_INFO_INSTANCE_SHFT = 0x10,
++ S_ARB_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00,
++ S_ARB_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8,
++ S_ARB_COMPONENT_INFO_TYPE_BMSK = 0xff,
++ S_ARB_COMPONENT_INFO_TYPE_SHFT = 0x0,
++};
++
++#define S_ARB_CONFIG_INFO_0_ADDR(b, n) \
++ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
++enum bimc_s_arb_config_info_0 {
++ S_ARB_CONFIG_INFO_0_RMSK = 0x800000ff,
++ S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_BMSK = 0x80000000,
++ S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_SHFT = 0x1f,
++ S_ARB_CONFIG_INFO_0_FUNC_BMSK = 0xff,
++ S_ARB_CONFIG_INFO_0_FUNC_SHFT = 0x0,
++};
++
++#define S_ARB_CONFIG_INFO_1_ADDR(b, n) \
++ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
++enum bimc_s_arb_config_info_1 {
++ S_ARB_CONFIG_INFO_1_RMSK = 0xffffffff,
++ S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff,
++ S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0,
++};
++
++#define S_ARB_CLK_CTRL_ADDR(b) \
++ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
++enum bimc_s_arb_clk_ctrl {
++ S_ARB_CLK_CTRL_RMSK = 0x1,
++ S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK = 0x2,
++ S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT = 0x1,
++ S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1,
++ S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0,
++ S_ARB_CLK_CTRL_CLK_GATING_EN_BMSK = 0x1,
++ S_ARB_CLK_CTRL_CLK_GATING_EN_SHFT = 0x0,
++};
++
++#define S_ARB_MODE_ADDR(b, n) \
++ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000210)
++enum bimc_s_arb_mode {
++ S_ARB_MODE_RMSK = 0xf0000001,
++ S_ARB_MODE_WR_GRANTS_AHEAD_BMSK = 0xf0000000,
++ S_ARB_MODE_WR_GRANTS_AHEAD_SHFT = 0x1c,
++ S_ARB_MODE_PRIO_RR_EN_BMSK = 0x1,
++ S_ARB_MODE_PRIO_RR_EN_SHFT = 0x0,
++};
++
++#define BKE_HEALTH_MASK \
++ (M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK |\
++ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK |\
++ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK)
++
++#define BKE_HEALTH_VAL(limit, areq, plvl) \
++ ((((limit) << M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT) & \
++ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK) | \
++ (((areq) << M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT) & \
++ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK) | \
++ (((plvl) << M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT) & \
++ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK))
++
++#define MAX_GRANT_PERIOD \
++ (M_BKE_GP_GP_BMSK >> \
++ M_BKE_GP_GP_SHFT)
++
++#define MAX_GC \
++ (M_BKE_GC_GC_BMSK >> \
++ (M_BKE_GC_GC_SHFT + 1))
++
++static int bimc_div(int64_t *a, uint32_t b)
++{
++ if ((*a > 0) && (*a < b)) {
++ *a = 0;
++ return 1;
++ } else {
++ return do_div(*a, b);
++ }
++}
++
++#define ENABLE(val) ((val) == 1 ? 1 : 0)
++void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo,
++ uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate)
++{
++ uint32_t val, mask, reg_val;
++ void __iomem *addr;
++
++ reg_val = readl_relaxed(M_CLK_CTRL_ADDR(binfo->base,
++ mas_index)) & M_CLK_CTRL_RMSK;
++ addr = M_CLK_CTRL_ADDR(binfo->base, mas_index);
++ mask = (M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK |
++ M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK);
++ val = (bgate->core_clk_gate_en <<
++ M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT) |
++ bgate->port_clk_gate_en;
++ writel_relaxed(((reg_val & (~mask)) | (val & mask)), addr);
++ /* Ensure clock gating enable mask is set before exiting */
++ wmb();
++}
++
++void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo,
++ uint32_t slv_index, bool en)
++{
++ uint32_t reg_val, reg_mask_val, enable, val;
++
++ reg_mask_val = (readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo->
++ base, slv_index)) & S_ARB_CONFIG_INFO_0_FUNC_BMSK)
++ >> S_ARB_CONFIG_INFO_0_FUNC_SHFT;
++ enable = ENABLE(en);
++ val = enable << S_ARB_MODE_PRIO_RR_EN_SHFT;
++ if (reg_mask_val == BIMC_ARB_MODE_PRIORITY_RR) {
++ reg_val = readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo->
++ base, slv_index)) & S_ARB_MODE_RMSK;
++ writel_relaxed(((reg_val & (~(S_ARB_MODE_PRIO_RR_EN_BMSK))) |
++ (val & S_ARB_MODE_PRIO_RR_EN_BMSK)),
++ S_ARB_MODE_ADDR(binfo->base, slv_index));
++ /* Ensure arbitration mode is set before returning */
++ wmb();
++ }
++}
++
++static void set_qos_mode(void __iomem *baddr, uint32_t index, uint32_t val0,
++ uint32_t val1, uint32_t val2)
++{
++ uint32_t reg_val, val;
++
++ reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR(baddr,
++ index)) & M_PRIOLVL_OVERRIDE_RMSK;
++ val = val0 << M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT;
++ writel_relaxed(((reg_val & ~(M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK))
++ | (val & M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK)),
++ M_PRIOLVL_OVERRIDE_ADDR(baddr, index));
++ reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR(baddr, index)) &
++ M_RD_CMD_OVERRIDE_RMSK;
++ val = val1 << M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT;
++ writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK
++ )) | (val & M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)),
++ M_RD_CMD_OVERRIDE_ADDR(baddr, index));
++ reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR(baddr, index)) &
++ M_WR_CMD_OVERRIDE_RMSK;
++ val = val2 << M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT;
++ writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK
++ )) | (val & M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)),
++ M_WR_CMD_OVERRIDE_ADDR(baddr, index));
++ /* Ensure the priority register writes go through */
++ wmb();
++}
++
++static void msm_bus_bimc_set_qos_mode(void __iomem *base,
++ uint32_t mas_index, uint8_t qmode_sel)
++{
++ uint32_t reg_val, val;
++
++ switch (qmode_sel) {
++ case BIMC_QOS_MODE_FIXED:
++ reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
++ mas_index));
++ writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)),
++ M_BKE_EN_ADDR(base, mas_index));
++ /* Ensure that the book-keeping register writes
++ * go through before setting QoS mode.
++ * QoS mode registers might write beyond 1K
++ * boundary in future
++ */
++ wmb();
++ set_qos_mode(base, mas_index, 1, 1, 1);
++ break;
++
++ case BIMC_QOS_MODE_BYPASS:
++ reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
++ mas_index));
++ writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)),
++ M_BKE_EN_ADDR(base, mas_index));
++ /* Ensure that the book-keeping register writes
++ * go through before setting QoS mode.
++ * QoS mode registers might write beyond 1K
++ * boundary in future
++ */
++ wmb();
++ set_qos_mode(base, mas_index, 0, 0, 0);
++ break;
++
++ case BIMC_QOS_MODE_REGULATOR:
++ case BIMC_QOS_MODE_LIMITER:
++ set_qos_mode(base, mas_index, 0, 0, 0);
++ reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
++ mas_index));
++ val = 1 << M_BKE_EN_EN_SHFT;
++ /* Ensure that the book-keeping register writes
++ * go through before setting QoS mode.
++ * QoS mode registers might write beyond 1K
++ * boundary in future
++ */
++ wmb();
++ writel_relaxed(((reg_val & (~M_BKE_EN_EN_BMSK)) | (val &
++ M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(base,
++ mas_index));
++ break;
++ default:
++ break;
++ }
++}
++
++static void set_qos_prio_rl(void __iomem *addr, uint32_t rmsk,
++ uint8_t index, struct msm_bus_bimc_qos_mode *qmode)
++{
++ uint32_t reg_val, val0, val;
++
++ /* Note, addr is already passed with right mas_index */
++ reg_val = readl_relaxed(addr) & rmsk;
++ val0 = BKE_HEALTH_VAL(qmode->rl.qhealth[index].limit_commands,
++ qmode->rl.qhealth[index].areq_prio,
++ qmode->rl.qhealth[index].prio_level);
++ val = ((reg_val & (~(BKE_HEALTH_MASK))) | (val0 & BKE_HEALTH_MASK));
++ writel_relaxed(val, addr);
++ /* Ensure that priority for regulator/limiter modes are
++ * set before returning
++ */
++ wmb();
++
++}
++
++static void msm_bus_bimc_set_qos_prio(void __iomem *base,
++ uint32_t mas_index, uint8_t qmode_sel,
++ struct msm_bus_bimc_qos_mode *qmode)
++{
++ uint32_t reg_val, val;
++
++ switch (qmode_sel) {
++ case BIMC_QOS_MODE_FIXED:
++ reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR(
++ base, mas_index)) & M_PRIOLVL_OVERRIDE_RMSK;
++ val = qmode->fixed.prio_level <<
++ M_PRIOLVL_OVERRIDE_SHFT;
++ writel_relaxed(((reg_val &
++ ~(M_PRIOLVL_OVERRIDE_BMSK)) | (val
++ & M_PRIOLVL_OVERRIDE_BMSK)),
++ M_PRIOLVL_OVERRIDE_ADDR(base, mas_index));
++
++ reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR(
++ base, mas_index)) & M_RD_CMD_OVERRIDE_RMSK;
++ val = qmode->fixed.areq_prio_rd <<
++ M_RD_CMD_OVERRIDE_AREQPRIO_SHFT;
++ writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_AREQPRIO_BMSK))
++ | (val & M_RD_CMD_OVERRIDE_AREQPRIO_BMSK)),
++ M_RD_CMD_OVERRIDE_ADDR(base, mas_index));
++
++ reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR(
++ base, mas_index)) & M_WR_CMD_OVERRIDE_RMSK;
++ val = qmode->fixed.areq_prio_wr <<
++ M_WR_CMD_OVERRIDE_AREQPRIO_SHFT;
++ writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_AREQPRIO_BMSK))
++ | (val & M_WR_CMD_OVERRIDE_AREQPRIO_BMSK)),
++ M_WR_CMD_OVERRIDE_ADDR(base, mas_index));
++ /* Ensure that fixed mode register writes go through
++ * before returning
++ */
++ wmb();
++ break;
++
++ case BIMC_QOS_MODE_REGULATOR:
++ case BIMC_QOS_MODE_LIMITER:
++ set_qos_prio_rl(M_BKE_HEALTH_3_CONFIG_ADDR(base,
++ mas_index), M_BKE_HEALTH_3_CONFIG_RMSK, 3, qmode);
++ set_qos_prio_rl(M_BKE_HEALTH_2_CONFIG_ADDR(base,
++ mas_index), M_BKE_HEALTH_2_CONFIG_RMSK, 2, qmode);
++ set_qos_prio_rl(M_BKE_HEALTH_1_CONFIG_ADDR(base,
++ mas_index), M_BKE_HEALTH_1_CONFIG_RMSK, 1, qmode);
++ set_qos_prio_rl(M_BKE_HEALTH_0_CONFIG_ADDR(base,
++ mas_index), M_BKE_HEALTH_0_CONFIG_RMSK, 0 , qmode);
++ break;
++ case BIMC_QOS_MODE_BYPASS:
++ default:
++ break;
++ }
++}
++
++static void set_qos_bw_regs(void __iomem *baddr, uint32_t mas_index,
++ int32_t th, int32_t tm, int32_t tl, uint32_t gp,
++ uint32_t gc)
++{
++ int32_t reg_val, val;
++ int32_t bke_reg_val;
++ int16_t val2;
++
++ /* Disable BKE before writing to registers as per spec */
++ bke_reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index));
++ writel_relaxed((bke_reg_val & ~(M_BKE_EN_EN_BMSK)),
++ M_BKE_EN_ADDR(baddr, mas_index));
++
++ /* Write values of registers calculated */
++ reg_val = readl_relaxed(M_BKE_GP_ADDR(baddr, mas_index))
++ & M_BKE_GP_RMSK;
++ val = gp << M_BKE_GP_GP_SHFT;
++ writel_relaxed(((reg_val & ~(M_BKE_GP_GP_BMSK)) | (val &
++ M_BKE_GP_GP_BMSK)), M_BKE_GP_ADDR(baddr, mas_index));
++
++ reg_val = readl_relaxed(M_BKE_GC_ADDR(baddr, mas_index)) &
++ M_BKE_GC_RMSK;
++ val = gc << M_BKE_GC_GC_SHFT;
++ writel_relaxed(((reg_val & ~(M_BKE_GC_GC_BMSK)) | (val &
++ M_BKE_GC_GC_BMSK)), M_BKE_GC_ADDR(baddr, mas_index));
++
++ reg_val = readl_relaxed(M_BKE_THH_ADDR(baddr, mas_index)) &
++ M_BKE_THH_RMSK;
++ val = th << M_BKE_THH_THRESH_SHFT;
++ writel_relaxed(((reg_val & ~(M_BKE_THH_THRESH_BMSK)) | (val &
++ M_BKE_THH_THRESH_BMSK)), M_BKE_THH_ADDR(baddr, mas_index));
++
++ reg_val = readl_relaxed(M_BKE_THM_ADDR(baddr, mas_index)) &
++ M_BKE_THM_RMSK;
++ val2 = tm << M_BKE_THM_THRESH_SHFT;
++ writel_relaxed(((reg_val & ~(M_BKE_THM_THRESH_BMSK)) | (val2 &
++ M_BKE_THM_THRESH_BMSK)), M_BKE_THM_ADDR(baddr, mas_index));
++
++ reg_val = readl_relaxed(M_BKE_THL_ADDR(baddr, mas_index)) &
++ M_BKE_THL_RMSK;
++ val2 = tl << M_BKE_THL_THRESH_SHFT;
++ writel_relaxed(((reg_val & ~(M_BKE_THL_THRESH_BMSK)) |
++ (val2 & M_BKE_THL_THRESH_BMSK)), M_BKE_THL_ADDR(baddr,
++ mas_index));
++
++ /* Ensure that all bandwidth register writes have completed
++ * before returning
++ */
++ wmb();
++}
++
++static void msm_bus_bimc_set_qos_bw(void __iomem *base, uint32_t qos_freq,
++ uint32_t mas_index, struct msm_bus_bimc_qos_bw *qbw)
++{
++ uint32_t bke_en;
++
++ /* Validate QOS Frequency */
++ if (qos_freq == 0) {
++ MSM_BUS_DBG("Zero frequency\n");
++ return;
++ }
++
++ /* Get enable bit for BKE before programming the period */
++ bke_en = (readl_relaxed(M_BKE_EN_ADDR(base, mas_index)) &
++ M_BKE_EN_EN_BMSK) >> M_BKE_EN_EN_SHFT;
++
++ /* Only calculate if there's a requested bandwidth and window */
++ if (qbw->bw && qbw->ws) {
++ int64_t th, tm, tl;
++ uint32_t gp, gc;
++ int64_t gp_nominal, gp_required, gp_calc, data, temp;
++ int64_t win = qbw->ws * qos_freq;
++ temp = win;
++ /*
++ * Calculate nominal grant period defined by requested
++ * window size.
++ * Ceil this value to max grant period.
++ */
++ bimc_div(&temp, 1000000);
++ gp_nominal = min_t(uint64_t, MAX_GRANT_PERIOD, temp);
++ /*
++ * Calculate max window size, defined by bw request.
++ * Units: (KHz, MB/s)
++ */
++ gp_calc = MAX_GC * qos_freq * 1000;
++ gp_required = gp_calc;
++ bimc_div(&gp_required, qbw->bw);
++
++ /* User min of two grant periods */
++ gp = min_t(int64_t, gp_nominal, gp_required);
++
++ /* Calculate bandwith in grants and ceil. */
++ temp = qbw->bw * gp;
++ data = qos_freq * 1000;
++ bimc_div(&temp, data);
++ gc = min_t(int64_t, MAX_GC, temp);
++
++ /* Calculate thresholds */
++ th = qbw->bw - qbw->thh;
++ tm = qbw->bw - qbw->thm;
++ tl = qbw->bw - qbw->thl;
++
++ th = th * gp;
++ bimc_div(&th, data);
++ tm = tm * gp;
++ bimc_div(&tm, data);
++ tl = tl * gp;
++ bimc_div(&tl, data);
++
++ MSM_BUS_DBG("BIMC: BW: mas_index: %d, th: %llu tm: %llu\n",
++ mas_index, th, tm);
++ MSM_BUS_DBG("BIMC: tl: %llu gp:%u gc: %u bke_en: %u\n",
++ tl, gp, gc, bke_en);
++ set_qos_bw_regs(base, mas_index, th, tm, tl, gp, gc);
++ } else
++ /* Clear bandwidth registers */
++ set_qos_bw_regs(base, mas_index, 0, 0, 0, 0, 0);
++}
++
++static int msm_bus_bimc_allocate_commit_data(struct msm_bus_fabric_registration
++ *fab_pdata, void **cdata, int ctx)
++{
++ struct msm_bus_bimc_commit **cd = (struct msm_bus_bimc_commit **)cdata;
++ struct msm_bus_bimc_info *binfo =
++ (struct msm_bus_bimc_info *)fab_pdata->hw_data;
++
++ MSM_BUS_DBG("Allocating BIMC commit data\n");
++ *cd = kzalloc(sizeof(struct msm_bus_bimc_commit), GFP_KERNEL);
++ if (!*cd) {
++ MSM_BUS_DBG("Couldn't alloc mem for cdata\n");
++ return -ENOMEM;
++ }
++
++ (*cd)->mas = binfo->cdata[ctx].mas;
++ (*cd)->slv = binfo->cdata[ctx].slv;
++
++ return 0;
++}
++
++static void *msm_bus_bimc_allocate_bimc_data(struct platform_device *pdev,
++ struct msm_bus_fabric_registration *fab_pdata)
++{
++ struct resource *bimc_mem;
++ struct resource *bimc_io;
++ struct msm_bus_bimc_info *binfo;
++ int i;
++
++ MSM_BUS_DBG("Allocating BIMC data\n");
++ binfo = kzalloc(sizeof(struct msm_bus_bimc_info), GFP_KERNEL);
++ if (!binfo) {
++ WARN(!binfo, "Couldn't alloc mem for bimc_info\n");
++ return NULL;
++ }
++
++ binfo->qos_freq = fab_pdata->qos_freq;
++
++ binfo->params.nmasters = fab_pdata->nmasters;
++ binfo->params.nslaves = fab_pdata->nslaves;
++ binfo->params.bus_id = fab_pdata->id;
++
++ for (i = 0; i < NUM_CTX; i++) {
++ binfo->cdata[i].mas = kzalloc(sizeof(struct
++ msm_bus_node_hw_info) * fab_pdata->nmasters * 2,
++ GFP_KERNEL);
++ if (!binfo->cdata[i].mas) {
++ MSM_BUS_ERR("Couldn't alloc mem for bimc master hw\n");
++ kfree(binfo);
++ return NULL;
++ }
++
++ binfo->cdata[i].slv = kzalloc(sizeof(struct
++ msm_bus_node_hw_info) * fab_pdata->nslaves * 2,
++ GFP_KERNEL);
++ if (!binfo->cdata[i].slv) {
++ MSM_BUS_DBG("Couldn't alloc mem for bimc slave hw\n");
++ kfree(binfo->cdata[i].mas);
++ kfree(binfo);
++ return NULL;
++ }
++ }
++
++ if (fab_pdata->virt) {
++ MSM_BUS_DBG("Don't get memory regions for virtual fabric\n");
++ goto skip_mem;
++ }
++
++ bimc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!bimc_mem) {
++ MSM_BUS_ERR("Cannot get BIMC Base address\n");
++ kfree(binfo);
++ return NULL;
++ }
++
++ bimc_io = request_mem_region(bimc_mem->start,
++ resource_size(bimc_mem), pdev->name);
++ if (!bimc_io) {
++ MSM_BUS_ERR("BIMC memory unavailable\n");
++ kfree(binfo);
++ return NULL;
++ }
++
++ binfo->base = ioremap(bimc_mem->start, resource_size(bimc_mem));
++ if (!binfo->base) {
++ MSM_BUS_ERR("IOremap failed for BIMC!\n");
++ release_mem_region(bimc_mem->start, resource_size(bimc_mem));
++ kfree(binfo);
++ return NULL;
++ }
++
++skip_mem:
++ fab_pdata->hw_data = (void *)binfo;
++ return (void *)binfo;
++}
++
++static void free_commit_data(void *cdata)
++{
++ struct msm_bus_bimc_commit *cd = (struct msm_bus_bimc_commit *)cdata;
++
++ kfree(cd->mas);
++ kfree(cd->slv);
++ kfree(cd);
++}
++
++static void bke_switch(
++ void __iomem *baddr, uint32_t mas_index, bool req, int mode)
++{
++ uint32_t reg_val, val, cur_val;
++
++ val = req << M_BKE_EN_EN_SHFT;
++ reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index));
++ cur_val = reg_val & M_BKE_EN_RMSK;
++ if (val == cur_val)
++ return;
++
++ if (!req && mode == BIMC_QOS_MODE_FIXED)
++ set_qos_mode(baddr, mas_index, 1, 1, 1);
++
++ writel_relaxed(((reg_val & ~(M_BKE_EN_EN_BMSK)) | (val &
++ M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(baddr, mas_index));
++ /* Make sure BKE on/off goes through before changing priorities */
++ wmb();
++
++ if (req)
++ set_qos_mode(baddr, mas_index, 0, 0, 0);
++}
++
++static void bimc_set_static_qos_bw(void __iomem *base, unsigned int qos_freq,
++ int mport, struct msm_bus_bimc_qos_bw *qbw)
++{
++ int32_t bw_mbps, thh = 0, thm, thl, gc;
++ int32_t gp;
++ u64 temp;
++
++ if (qos_freq == 0) {
++ MSM_BUS_DBG("No QoS Frequency.\n");
++ return;
++ }
++
++ if (!(qbw->bw && qbw->gp)) {
++ MSM_BUS_DBG("No QoS Bandwidth or Window size\n");
++ return;
++ }
++
++ /* Convert bandwidth to MBPS */
++ temp = qbw->bw;
++ bimc_div(&temp, 1000000);
++ bw_mbps = temp;
++
++ /* Grant period in clock cycles
++ * Grant period from bandwidth structure
++ * is in nano seconds, QoS freq is in KHz.
++ * Divide by 1000 to get clock cycles.
++ */
++ gp = (qos_freq * qbw->gp) / (1000 * NSEC_PER_USEC);
++
++ /* Grant count = BW in MBps * Grant period
++ * in micro seconds
++ */
++ gc = bw_mbps * (qbw->gp / NSEC_PER_USEC);
++ gc = min(gc, MAX_GC);
++
++ /* Medium threshold = -((Medium Threshold percentage *
++ * Grant count) / 100)
++ */
++ thm = -((qbw->thmp * gc) / 100);
++ qbw->thm = thm;
++
++ /* Low threshold = -(Grant count) */
++ thl = -gc;
++ qbw->thl = thl;
++
++ MSM_BUS_DBG("%s: BKE parameters: gp %d, gc %d, thm %d thl %d thh %d",
++ __func__, gp, gc, thm, thl, thh);
++
++ trace_bus_bke_params(gc, gp, thl, thm, thl);
++ set_qos_bw_regs(base, mport, thh, thm, thl, gp, gc);
++}
++
++static void msm_bus_bimc_config_master(
++ struct msm_bus_fabric_registration *fab_pdata,
++ struct msm_bus_inode_info *info,
++ uint64_t req_clk, uint64_t req_bw)
++{
++ int mode, i, ports;
++ struct msm_bus_bimc_info *binfo;
++ uint64_t bw = 0;
++
++ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
++ ports = info->node_info->num_mports;
++
++ /**
++ * Here check the details of dual configuration.
++ * Take actions based on different modes.
++ * Check for threshold if limiter mode, etc.
++ */
++
++ if (req_clk <= info->node_info->th[0]) {
++ mode = info->node_info->mode;
++ bw = info->node_info->bimc_bw[0];
++ } else if ((info->node_info->num_thresh > 1) &&
++ (req_clk <= info->node_info->th[1])) {
++ mode = info->node_info->mode;
++ bw = info->node_info->bimc_bw[1];
++ } else
++ mode = info->node_info->mode_thresh;
++
++ switch (mode) {
++ case BIMC_QOS_MODE_BYPASS:
++ case BIMC_QOS_MODE_FIXED:
++ for (i = 0; i < ports; i++)
++ bke_switch(binfo->base, info->node_info->qport[i],
++ BKE_OFF, mode);
++ break;
++ case BIMC_QOS_MODE_REGULATOR:
++ case BIMC_QOS_MODE_LIMITER:
++ for (i = 0; i < ports; i++) {
++ /* If not in fixed mode, update bandwidth */
++ if ((info->node_info->cur_lim_bw != bw)
++ && (mode != BIMC_QOS_MODE_FIXED)) {
++ struct msm_bus_bimc_qos_bw qbw;
++ qbw.ws = info->node_info->ws;
++ qbw.bw = bw;
++ qbw.gp = info->node_info->bimc_gp;
++ qbw.thmp = info->node_info->bimc_thmp;
++ bimc_set_static_qos_bw(binfo->base,
++ binfo->qos_freq,
++ info->node_info->qport[i], &qbw);
++ info->node_info->cur_lim_bw = bw;
++ MSM_BUS_DBG("%s: Qos is %d reqclk %llu bw %llu",
++ __func__, mode, req_clk, bw);
++ }
++ bke_switch(binfo->base, info->node_info->qport[i],
++ BKE_ON, mode);
++ }
++ break;
++ default:
++ break;
++ }
++}
++
++static void msm_bus_bimc_update_bw(struct msm_bus_inode_info *hop,
++ struct msm_bus_inode_info *info,
++ struct msm_bus_fabric_registration *fab_pdata,
++ void *sel_cdata, int *master_tiers,
++ int64_t add_bw)
++{
++ struct msm_bus_bimc_info *binfo;
++ struct msm_bus_bimc_qos_bw qbw;
++ int i;
++ int64_t bw;
++ int ports = info->node_info->num_mports;
++ struct msm_bus_bimc_commit *sel_cd =
++ (struct msm_bus_bimc_commit *)sel_cdata;
++
++ MSM_BUS_DBG("BIMC: Update bw for ID %d, with IID: %d: %lld\n",
++ info->node_info->id, info->node_info->priv_id, add_bw);
++
++ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
++
++ if (info->node_info->num_mports == 0) {
++ MSM_BUS_DBG("BIMC: Skip Master BW\n");
++ goto skip_mas_bw;
++ }
++
++ ports = info->node_info->num_mports;
++ bw = INTERLEAVED_BW(fab_pdata, add_bw, ports);
++
++ for (i = 0; i < ports; i++) {
++ sel_cd->mas[info->node_info->masterp[i]].bw += bw;
++ sel_cd->mas[info->node_info->masterp[i]].hw_id =
++ info->node_info->mas_hw_id;
++ MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n",
++ info->node_info->priv_id,
++ sel_cd->mas[info->node_info->masterp[i]].bw);
++ if (info->node_info->hw_sel == MSM_BUS_RPM)
++ sel_cd->mas[info->node_info->masterp[i]].dirty = 1;
++ else {
++ if (!info->node_info->qport) {
++ MSM_BUS_DBG("No qos ports to update!\n");
++ break;
++ }
++ if (!(info->node_info->mode == BIMC_QOS_MODE_REGULATOR)
++ || (info->node_info->mode ==
++ BIMC_QOS_MODE_LIMITER)) {
++ MSM_BUS_DBG("Skip QoS reg programming\n");
++ break;
++ }
++
++ MSM_BUS_DBG("qport: %d\n", info->node_info->qport[i]);
++ qbw.bw = sel_cd->mas[info->node_info->masterp[i]].bw;
++ qbw.ws = info->node_info->ws;
++ /* Threshold low = 90% of bw */
++ qbw.thl = div_s64((90 * bw), 100);
++ /* Threshold medium = bw */
++ qbw.thm = bw;
++ /* Threshold high = 10% more than bw */
++ qbw.thh = div_s64((110 * bw), 100);
++ /* Check if info is a shared master.
++ * If it is, mark it dirty
++ * If it isn't, then set QOS Bandwidth.
++ * Also if dual-conf is set, don't program bw regs.
++ **/
++ if (!info->node_info->dual_conf &&
++ ((info->node_info->mode == BIMC_QOS_MODE_LIMITER) ||
++ (info->node_info->mode == BIMC_QOS_MODE_REGULATOR)))
++ msm_bus_bimc_set_qos_bw(binfo->base,
++ binfo->qos_freq,
++ info->node_info->qport[i], &qbw);
++ }
++ }
++
++skip_mas_bw:
++ ports = hop->node_info->num_sports;
++ MSM_BUS_DBG("BIMC: ID: %d, Sports: %d\n", hop->node_info->priv_id,
++ ports);
++
++ for (i = 0; i < ports; i++) {
++ sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw;
++ sel_cd->slv[hop->node_info->slavep[i]].hw_id =
++ hop->node_info->slv_hw_id;
++ MSM_BUS_DBG("BIMC: Update slave_bw: ID: %d -> %llu\n",
++ hop->node_info->priv_id,
++ sel_cd->slv[hop->node_info->slavep[i]].bw);
++ MSM_BUS_DBG("BIMC: Update slave_bw: index: %d\n",
++ hop->node_info->slavep[i]);
++ /* Check if hop is a shared slave.
++ * If it is, mark it dirty
++ * If it isn't, then nothing to be done as the
++ * slaves are in bypass mode.
++ **/
++ if (hop->node_info->hw_sel == MSM_BUS_RPM) {
++ MSM_BUS_DBG("Slave dirty: %d, slavep: %d\n",
++ hop->node_info->priv_id,
++ hop->node_info->slavep[i]);
++ sel_cd->slv[hop->node_info->slavep[i]].dirty = 1;
++ }
++ }
++}
++
++static int msm_bus_bimc_commit(struct msm_bus_fabric_registration
++ *fab_pdata, void *hw_data, void **cdata)
++{
++ MSM_BUS_DBG("\nReached BIMC Commit\n");
++ msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata);
++ return 0;
++}
++
++static void msm_bus_bimc_config_limiter(
++ struct msm_bus_fabric_registration *fab_pdata,
++ struct msm_bus_inode_info *info)
++{
++ struct msm_bus_bimc_info *binfo;
++ int mode, i, ports;
++
++ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
++ ports = info->node_info->num_mports;
++
++ if (!info->node_info->qport) {
++ MSM_BUS_DBG("No QoS Ports to init\n");
++ return;
++ }
++
++ if (info->cur_lim_bw)
++ mode = BIMC_QOS_MODE_LIMITER;
++ else
++ mode = info->node_info->mode;
++
++ switch (mode) {
++ case BIMC_QOS_MODE_BYPASS:
++ case BIMC_QOS_MODE_FIXED:
++ for (i = 0; i < ports; i++)
++ bke_switch(binfo->base, info->node_info->qport[i],
++ BKE_OFF, mode);
++ break;
++ case BIMC_QOS_MODE_REGULATOR:
++ case BIMC_QOS_MODE_LIMITER:
++ if (info->cur_lim_bw != info->cur_prg_bw) {
++ MSM_BUS_DBG("Enabled BKE throttling node %d to %llu\n",
++ info->node_info->id, info->cur_lim_bw);
++ trace_bus_bimc_config_limiter(info->node_info->id,
++ info->cur_lim_bw);
++ for (i = 0; i < ports; i++) {
++ /* If not in fixed mode, update bandwidth */
++ struct msm_bus_bimc_qos_bw qbw;
++
++ qbw.ws = info->node_info->ws;
++ qbw.bw = info->cur_lim_bw;
++ qbw.gp = info->node_info->bimc_gp;
++ qbw.thmp = info->node_info->bimc_thmp;
++ bimc_set_static_qos_bw(binfo->base,
++ binfo->qos_freq,
++ info->node_info->qport[i], &qbw);
++ bke_switch(binfo->base,
++ info->node_info->qport[i],
++ BKE_ON, mode);
++ info->cur_prg_bw = qbw.bw;
++ }
++ }
++ break;
++ default:
++ break;
++ }
++}
++
++static void bimc_init_mas_reg(struct msm_bus_bimc_info *binfo,
++ struct msm_bus_inode_info *info,
++ struct msm_bus_bimc_qos_mode *qmode, int mode)
++{
++ int i;
++
++ switch (mode) {
++ case BIMC_QOS_MODE_FIXED:
++ qmode->fixed.prio_level = info->node_info->prio_lvl;
++ qmode->fixed.areq_prio_rd = info->node_info->prio_rd;
++ qmode->fixed.areq_prio_wr = info->node_info->prio_wr;
++ break;
++ case BIMC_QOS_MODE_LIMITER:
++ qmode->rl.qhealth[0].limit_commands = 1;
++ qmode->rl.qhealth[1].limit_commands = 0;
++ qmode->rl.qhealth[2].limit_commands = 0;
++ qmode->rl.qhealth[3].limit_commands = 0;
++ break;
++ default:
++ break;
++ }
++
++ if (!info->node_info->qport) {
++ MSM_BUS_DBG("No QoS Ports to init\n");
++ return;
++ }
++
++ for (i = 0; i < info->node_info->num_mports; i++) {
++ /* If not in bypass mode, update priority */
++ if (mode != BIMC_QOS_MODE_BYPASS) {
++ msm_bus_bimc_set_qos_prio(binfo->base,
++ info->node_info->
++ qport[i], mode, qmode);
++
++ /* If not in fixed mode, update bandwidth */
++ if (mode != BIMC_QOS_MODE_FIXED) {
++ struct msm_bus_bimc_qos_bw qbw;
++ qbw.ws = info->node_info->ws;
++ qbw.bw = info->node_info->bimc_bw[0];
++ qbw.gp = info->node_info->bimc_gp;
++ qbw.thmp = info->node_info->bimc_thmp;
++ bimc_set_static_qos_bw(binfo->base,
++ binfo->qos_freq,
++ info->node_info->qport[i], &qbw);
++ }
++ }
++
++ /* set mode */
++ msm_bus_bimc_set_qos_mode(binfo->base,
++ info->node_info->qport[i],
++ mode);
++ }
++}
++
++static void init_health_regs(struct msm_bus_bimc_info *binfo,
++ struct msm_bus_inode_info *info,
++ struct msm_bus_bimc_qos_mode *qmode,
++ int mode)
++{
++ int i;
++
++ if (mode == BIMC_QOS_MODE_LIMITER) {
++ qmode->rl.qhealth[0].limit_commands = 1;
++ qmode->rl.qhealth[1].limit_commands = 0;
++ qmode->rl.qhealth[2].limit_commands = 0;
++ qmode->rl.qhealth[3].limit_commands = 0;
++
++ if (!info->node_info->qport) {
++ MSM_BUS_DBG("No QoS Ports to init\n");
++ return;
++ }
++
++ for (i = 0; i < info->node_info->num_mports; i++) {
++ /* If not in bypass mode, update priority */
++ if (mode != BIMC_QOS_MODE_BYPASS)
++ msm_bus_bimc_set_qos_prio(binfo->base,
++ info->node_info->qport[i], mode, qmode);
++ }
++ }
++}
++
++
++static int msm_bus_bimc_mas_init(struct msm_bus_bimc_info *binfo,
++ struct msm_bus_inode_info *info)
++{
++ struct msm_bus_bimc_qos_mode *qmode;
++ qmode = kzalloc(sizeof(struct msm_bus_bimc_qos_mode),
++ GFP_KERNEL);
++ if (!qmode) {
++ MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n",
++ info->node_info->id);
++ return -ENOMEM;
++ }
++
++ info->hw_data = (void *)qmode;
++
++ /**
++ * If the master supports dual configuration,
++ * configure registers for both modes
++ */
++ if (info->node_info->dual_conf)
++ bimc_init_mas_reg(binfo, info, qmode,
++ info->node_info->mode_thresh);
++ else if (info->node_info->nr_lim)
++ init_health_regs(binfo, info, qmode, BIMC_QOS_MODE_LIMITER);
++
++ bimc_init_mas_reg(binfo, info, qmode, info->node_info->mode);
++ return 0;
++}
++
++static void msm_bus_bimc_node_init(void *hw_data,
++ struct msm_bus_inode_info *info)
++{
++ struct msm_bus_bimc_info *binfo =
++ (struct msm_bus_bimc_info *)hw_data;
++
++ if (!IS_SLAVE(info->node_info->priv_id) &&
++ (info->node_info->hw_sel != MSM_BUS_RPM))
++ msm_bus_bimc_mas_init(binfo, info);
++}
++
++static int msm_bus_bimc_port_halt(uint32_t haltid, uint8_t mport)
++{
++ return 0;
++}
++
++static int msm_bus_bimc_port_unhalt(uint32_t haltid, uint8_t mport)
++{
++ return 0;
++}
++
++static int msm_bus_bimc_limit_mport(struct msm_bus_node_device_type *info,
++ void __iomem *qos_base, uint32_t qos_off,
++ uint32_t qos_delta, uint32_t qos_freq,
++ bool enable_lim, u64 lim_bw)
++{
++ int mode;
++ int i;
++
++ if (ZERO_OR_NULL_PTR(info->node_info->qport)) {
++ MSM_BUS_DBG("No QoS Ports to limit\n");
++ return 0;
++ }
++
++ if (enable_lim && lim_bw) {
++ mode = BIMC_QOS_MODE_LIMITER;
++
++ if (!info->node_info->lim_bw) {
++ struct msm_bus_bimc_qos_mode qmode;
++ qmode.rl.qhealth[0].limit_commands = 1;
++ qmode.rl.qhealth[1].limit_commands = 0;
++ qmode.rl.qhealth[2].limit_commands = 0;
++ qmode.rl.qhealth[3].limit_commands = 0;
++
++ for (i = 0; i < info->node_info->num_qports; i++) {
++ /* If not in bypass mode, update priority */
++ if (mode != BIMC_QOS_MODE_BYPASS)
++ msm_bus_bimc_set_qos_prio(qos_base,
++ info->node_info->qport[i], mode,
++ &qmode);
++ }
++ }
++
++ for (i = 0; i < info->node_info->num_qports; i++) {
++ struct msm_bus_bimc_qos_bw qbw;
++ /* If not in fixed mode, update bandwidth */
++ if ((info->node_info->lim_bw != lim_bw)) {
++ qbw.ws = info->node_info->qos_params.ws;
++ qbw.bw = lim_bw;
++ qbw.gp = info->node_info->qos_params.gp;
++ qbw.thmp = info->node_info->qos_params.thmp;
++ bimc_set_static_qos_bw(qos_base, qos_freq,
++ info->node_info->qport[i], &qbw);
++ }
++ bke_switch(qos_base, info->node_info->qport[i],
++ BKE_ON, mode);
++ }
++ info->node_info->lim_bw = lim_bw;
++ } else {
++ mode = info->node_info->qos_params.mode;
++ for (i = 0; i < info->node_info->num_qports; i++) {
++ bke_switch(qos_base, info->node_info->qport[i],
++ BKE_OFF, mode);
++ }
++ }
++ info->node_info->qos_params.cur_mode = mode;
++ return 0;
++}
++
++static bool msm_bus_bimc_update_bw_reg(int mode)
++{
++ bool ret = false;
++
++ if ((mode == BIMC_QOS_MODE_LIMITER)
++ || (mode == BIMC_QOS_MODE_REGULATOR))
++ ret = true;
++
++ return ret;
++}
++
++static int msm_bus_bimc_qos_init(struct msm_bus_node_device_type *info,
++ void __iomem *qos_base,
++ uint32_t qos_off, uint32_t qos_delta,
++ uint32_t qos_freq)
++{
++ int i;
++ struct msm_bus_bimc_qos_mode qmode;
++
++ switch (info->node_info->qos_params.mode) {
++ case BIMC_QOS_MODE_FIXED:
++ qmode.fixed.prio_level = info->node_info->qos_params.prio_lvl;
++ qmode.fixed.areq_prio_rd = info->node_info->qos_params.prio_rd;
++ qmode.fixed.areq_prio_wr = info->node_info->qos_params.prio_wr;
++ break;
++ case BIMC_QOS_MODE_LIMITER:
++ qmode.rl.qhealth[0].limit_commands = 1;
++ qmode.rl.qhealth[1].limit_commands = 0;
++ qmode.rl.qhealth[2].limit_commands = 0;
++ qmode.rl.qhealth[3].limit_commands = 0;
++ break;
++ default:
++ break;
++ }
++
++ if (ZERO_OR_NULL_PTR(info->node_info->qport)) {
++ MSM_BUS_DBG("No QoS Ports to init\n");
++ return 0;
++ }
++
++ for (i = 0; i < info->node_info->num_qports; i++) {
++ /* If not in bypass mode, update priority */
++ if (info->node_info->qos_params.mode != BIMC_QOS_MODE_BYPASS)
++ msm_bus_bimc_set_qos_prio(qos_base, info->node_info->
++ qport[i], info->node_info->qos_params.mode,
++ &qmode);
++
++ /* set mode */
++ if (info->node_info->qos_params.mode == BIMC_QOS_MODE_LIMITER)
++ bke_switch(qos_base, info->node_info->qport[i],
++ BKE_OFF, BIMC_QOS_MODE_FIXED);
++ else
++ msm_bus_bimc_set_qos_mode(qos_base,
++ info->node_info->qport[i],
++ info->node_info->qos_params.mode);
++ }
++
++ return 0;
++}
++
++static int msm_bus_bimc_set_bw(struct msm_bus_node_device_type *dev,
++ void __iomem *qos_base, uint32_t qos_off,
++ uint32_t qos_delta, uint32_t qos_freq)
++{
++ struct msm_bus_bimc_qos_bw qbw;
++ int i;
++ int64_t bw = 0;
++ int ret = 0;
++ struct msm_bus_node_info_type *info = dev->node_info;
++
++ if (info && info->num_qports &&
++ ((info->qos_params.mode == BIMC_QOS_MODE_LIMITER) ||
++ (info->qos_params.mode == BIMC_QOS_MODE_REGULATOR))) {
++ bw = msm_bus_div64(info->num_qports,
++ dev->node_ab.ab[DUAL_CTX]);
++
++ for (i = 0; i < info->num_qports; i++) {
++ MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n",
++ info->id, bw);
++
++ if (!info->qport) {
++ MSM_BUS_DBG("No qos ports to update!\n");
++ break;
++ }
++
++ qbw.bw = bw + info->qos_params.bw_buffer;
++ trace_bus_bimc_config_limiter(info->id, bw);
++
++ /* Default to gp of 5us */
++ qbw.gp = (info->qos_params.gp ?
++ info->qos_params.gp : 5000);
++ /* Default to thmp of 50% */
++ qbw.thmp = (info->qos_params.thmp ?
++ info->qos_params.thmp : 50);
++ /*
++ * If the BW vote is 0 then set the QoS mode to
++ * Fixed.
++ */
++ if (bw) {
++ bimc_set_static_qos_bw(qos_base, qos_freq,
++ info->qport[i], &qbw);
++ bke_switch(qos_base, info->qport[i],
++ BKE_ON, info->qos_params.mode);
++ } else {
++ bke_switch(qos_base, info->qport[i],
++ BKE_OFF, BIMC_QOS_MODE_FIXED);
++ }
++ }
++ }
++ return ret;
++}
++
++int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata,
++ struct msm_bus_hw_algorithm *hw_algo)
++{
++ /* Set interleaving to true by default */
++ MSM_BUS_DBG("\nInitializing BIMC...\n");
++ pdata->il_flag = true;
++ hw_algo->allocate_commit_data = msm_bus_bimc_allocate_commit_data;
++ hw_algo->allocate_hw_data = msm_bus_bimc_allocate_bimc_data;
++ hw_algo->node_init = msm_bus_bimc_node_init;
++ hw_algo->free_commit_data = free_commit_data;
++ hw_algo->update_bw = msm_bus_bimc_update_bw;
++ hw_algo->commit = msm_bus_bimc_commit;
++ hw_algo->port_halt = msm_bus_bimc_port_halt;
++ hw_algo->port_unhalt = msm_bus_bimc_port_unhalt;
++ hw_algo->config_master = msm_bus_bimc_config_master;
++ hw_algo->config_limiter = msm_bus_bimc_config_limiter;
++ hw_algo->update_bw_reg = msm_bus_bimc_update_bw_reg;
++ /* BIMC slaves are shared. Slave registers are set through RPM */
++ if (!pdata->ahb)
++ pdata->rpm_enabled = 1;
++ return 0;
++}
++
++int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev)
++{
++ if (!bus_dev)
++ return -ENODEV;
++ else {
++ bus_dev->fabdev->noc_ops.qos_init = msm_bus_bimc_qos_init;
++ bus_dev->fabdev->noc_ops.set_bw = msm_bus_bimc_set_bw;
++ bus_dev->fabdev->noc_ops.limit_mport = msm_bus_bimc_limit_mport;
++ bus_dev->fabdev->noc_ops.update_bw_reg =
++ msm_bus_bimc_update_bw_reg;
++ }
++ return 0;
++}
++EXPORT_SYMBOL(msm_bus_bimc_set_ops);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_bimc.h
+@@ -0,0 +1,127 @@
++/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H
++#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H
++
++struct msm_bus_bimc_params {
++ uint32_t bus_id;
++ uint32_t addr_width;
++ uint32_t data_width;
++ uint32_t nmasters;
++ uint32_t nslaves;
++};
++
++struct msm_bus_bimc_commit {
++ struct msm_bus_node_hw_info *mas;
++ struct msm_bus_node_hw_info *slv;
++};
++
++struct msm_bus_bimc_info {
++ void __iomem *base;
++ uint32_t base_addr;
++ uint32_t qos_freq;
++ struct msm_bus_bimc_params params;
++ struct msm_bus_bimc_commit cdata[NUM_CTX];
++};
++
++struct msm_bus_bimc_node {
++ uint32_t conn_mask;
++ uint32_t data_width;
++ uint8_t slv_arb_mode;
++};
++
++enum msm_bus_bimc_arb_mode {
++ BIMC_ARB_MODE_RR = 0,
++ BIMC_ARB_MODE_PRIORITY_RR,
++ BIMC_ARB_MODE_TIERED_RR,
++};
++
++
++enum msm_bus_bimc_interleave {
++ BIMC_INTERLEAVE_NONE = 0,
++ BIMC_INTERLEAVE_ODD,
++ BIMC_INTERLEAVE_EVEN,
++};
++
++struct msm_bus_bimc_slave_seg {
++ bool enable;
++ uint64_t start_addr;
++ uint64_t seg_size;
++ uint8_t interleave;
++};
++
++enum msm_bus_bimc_qos_mode_type {
++ BIMC_QOS_MODE_FIXED = 0,
++ BIMC_QOS_MODE_LIMITER,
++ BIMC_QOS_MODE_BYPASS,
++ BIMC_QOS_MODE_REGULATOR,
++};
++
++struct msm_bus_bimc_qos_health {
++ bool limit_commands;
++ uint32_t areq_prio;
++ uint32_t prio_level;
++};
++
++struct msm_bus_bimc_mode_fixed {
++ uint32_t prio_level;
++ uint32_t areq_prio_rd;
++ uint32_t areq_prio_wr;
++};
++
++struct msm_bus_bimc_mode_rl {
++ uint8_t qhealthnum;
++ struct msm_bus_bimc_qos_health qhealth[4];
++};
++
++struct msm_bus_bimc_qos_mode {
++ uint8_t mode;
++ struct msm_bus_bimc_mode_fixed fixed;
++ struct msm_bus_bimc_mode_rl rl;
++};
++
++struct msm_bus_bimc_qos_bw {
++ uint64_t bw; /* bw is in Bytes/sec */
++ uint32_t ws; /* Window size in nano seconds*/
++ int64_t thh; /* Threshold high, bytes per second */
++ int64_t thm; /* Threshold medium, bytes per second */
++ int64_t thl; /* Threshold low, bytes per second */
++ u32 gp; /* Grant Period in micro seconds */
++ u32 thmp; /* Threshold medium in percentage */
++};
++
++struct msm_bus_bimc_clk_gate {
++ bool core_clk_gate_en;
++ bool arb_clk_gate_en; /* For arbiter */
++ bool port_clk_gate_en; /* For regs on BIMC core clock */
++};
++
++void msm_bus_bimc_set_slave_seg(struct msm_bus_bimc_info *binfo,
++ uint32_t slv_index, uint32_t seg_index,
++ struct msm_bus_bimc_slave_seg *bsseg);
++void msm_bus_bimc_set_slave_clk_gate(struct msm_bus_bimc_info *binfo,
++ uint32_t slv_index, struct msm_bus_bimc_clk_gate *bgate);
++void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo,
++ uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate);
++void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo,
++ uint32_t slv_index, bool en);
++void msm_bus_bimc_get_params(struct msm_bus_bimc_info *binfo,
++ struct msm_bus_bimc_params *params);
++void msm_bus_bimc_get_mas_params(struct msm_bus_bimc_info *binfo,
++ uint32_t mas_index, struct msm_bus_bimc_node *mparams);
++void msm_bus_bimc_get_slv_params(struct msm_bus_bimc_info *binfo,
++ uint32_t slv_index, struct msm_bus_bimc_node *sparams);
++bool msm_bus_bimc_get_arb_en(struct msm_bus_bimc_info *binfo,
++ uint32_t slv_index);
++
++#endif /*_ARCH_ARM_MACH_MSM_BUS_BIMC_H*/
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_client_api.c
+@@ -0,0 +1,83 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/radix-tree.h>
++#include <linux/clk.h>
++#include "msm-bus.h"
++#include "msm_bus_core.h"
++
++struct msm_bus_arb_ops arb_ops;
++
++/**
++ * msm_bus_scale_register_client() - Register the clients with the msm bus
++ * driver
++ * @pdata: Platform data of the client, containing src, dest, ab, ib.
++ * Return non-zero value in case of success, 0 in case of failure.
++ *
++ * Client data contains the vectors specifying arbitrated bandwidth (ab)
++ * and instantaneous bandwidth (ib) requested between a particular
++ * src and dest.
++ */
++uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata)
++{
++ if (arb_ops.register_client)
++ return arb_ops.register_client(pdata);
++ else {
++ pr_err("%s: Bus driver not ready.",
++ __func__);
++ return 0;
++ }
++}
++EXPORT_SYMBOL(msm_bus_scale_register_client);
++
++/**
++ * msm_bus_scale_client_update_request() - Update the request for bandwidth
++ * from a particular client
++ *
++ * cl: Handle to the client
++ * index: Index into the vector, to which the bw and clock values need to be
++ * updated
++ */
++int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index)
++{
++ if (arb_ops.update_request)
++ return arb_ops.update_request(cl, index);
++ else {
++ pr_err("%s: Bus driver not ready.",
++ __func__);
++ return -EPROBE_DEFER;
++ }
++}
++EXPORT_SYMBOL(msm_bus_scale_client_update_request);
++
++/**
++ * msm_bus_scale_unregister_client() - Unregister the client from the bus driver
++ * @cl: Handle to the client
++ */
++void msm_bus_scale_unregister_client(uint32_t cl)
++{
++ if (arb_ops.unregister_client)
++ arb_ops.unregister_client(cl);
++ else {
++ pr_err("%s: Bus driver not ready.",
++ __func__);
++ }
++}
++EXPORT_SYMBOL(msm_bus_scale_unregister_client);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_core.c
+@@ -0,0 +1,125 @@
++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/radix-tree.h>
++#include <linux/clk.h>
++#include "msm-bus-board.h"
++#include "msm-bus.h"
++#include "msm_bus_core.h"
++
++static atomic_t num_fab = ATOMIC_INIT(0);
++
++int msm_bus_get_num_fab(void)
++{
++ return atomic_read(&num_fab);
++}
++
++int msm_bus_device_match(struct device *dev, void *id)
++{
++ struct msm_bus_fabric_device *fabdev = to_msm_bus_fabric_device(dev);
++
++ if (!fabdev) {
++ MSM_BUS_WARN("Fabric %p returning 0\n", fabdev);
++ return 0;
++ }
++ return fabdev->id == *(int *)id;
++}
++
++static void msm_bus_release(struct device *device)
++{
++}
++
++struct bus_type msm_bus_type = {
++ .name = "msm-bus-type",
++};
++EXPORT_SYMBOL(msm_bus_type);
++
++/**
++ * msm_bus_get_fabric_device() - This function is used to search for
++ * the fabric device on the bus
++ * @fabid: Fabric id
++ * Function returns: Pointer to the fabric device
++ */
++struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid)
++{
++ struct device *dev;
++ struct msm_bus_fabric_device *fabric;
++ dev = bus_find_device(&msm_bus_type, NULL, (void *)&fabid,
++ msm_bus_device_match);
++ if (!dev)
++ return NULL;
++ fabric = to_msm_bus_fabric_device(dev);
++ return fabric;
++}
++
++/**
++ * msm_bus_fabric_device_register() - Registers a fabric on msm bus
++ * @fabdev: Fabric device to be registered
++ */
++int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabdev)
++{
++ int ret = 0;
++ fabdev->dev.bus = &msm_bus_type;
++ fabdev->dev.release = msm_bus_release;
++ ret = dev_set_name(&fabdev->dev, fabdev->name);
++ if (ret) {
++ MSM_BUS_ERR("error setting dev name\n");
++ goto err;
++ }
++
++ ret = device_register(&fabdev->dev);
++ if (ret < 0) {
++ MSM_BUS_ERR("error registering device%d %s\n",
++ ret, fabdev->name);
++ goto err;
++ }
++ atomic_inc(&num_fab);
++err:
++ return ret;
++}
++
++/**
++ * msm_bus_fabric_device_unregister() - Unregisters the fabric
++ * devices from the msm bus
++ */
++void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabdev)
++{
++ device_unregister(&fabdev->dev);
++ atomic_dec(&num_fab);
++}
++
++static void __exit msm_bus_exit(void)
++{
++ bus_unregister(&msm_bus_type);
++}
++
++static int __init msm_bus_init(void)
++{
++ int retval = 0;
++ retval = bus_register(&msm_bus_type);
++ if (retval)
++ MSM_BUS_ERR("bus_register error! %d\n",
++ retval);
++ return retval;
++}
++postcore_initcall(msm_bus_init);
++module_exit(msm_bus_exit);
++MODULE_LICENSE("GPL v2");
++MODULE_VERSION("0.2");
++MODULE_ALIAS("platform:msm_bus");
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_core.h
+@@ -0,0 +1,375 @@
++/* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_CORE_H
++#define _ARCH_ARM_MACH_MSM_BUS_CORE_H
++
++#include <linux/types.h>
++#include <linux/device.h>
++#include <linux/radix-tree.h>
++#include <linux/platform_device.h>
++#include "msm-bus-board.h"
++#include "msm-bus.h"
++
++#define MSM_BUS_DBG(msg, ...) \
++ pr_debug(msg, ## __VA_ARGS__)
++#define MSM_BUS_ERR(msg, ...) \
++ pr_err(msg, ## __VA_ARGS__)
++#define MSM_BUS_WARN(msg, ...) \
++ pr_warn(msg, ## __VA_ARGS__)
++#define MSM_FAB_ERR(msg, ...) \
++ dev_err(&fabric->fabdev.dev, msg, ## __VA_ARGS__)
++
++#define IS_MASTER_VALID(mas) \
++ (((mas >= MSM_BUS_MASTER_FIRST) && (mas <= MSM_BUS_MASTER_LAST)) \
++ ? 1 : 0)
++#define IS_SLAVE_VALID(slv) \
++ (((slv >= MSM_BUS_SLAVE_FIRST) && (slv <= MSM_BUS_SLAVE_LAST)) ? 1 : 0)
++
++#define INTERLEAVED_BW(fab_pdata, bw, ports) \
++ ((fab_pdata->il_flag) ? ((bw < 0) \
++ ? -msm_bus_div64((ports), (-bw)) : msm_bus_div64((ports), (bw))) : (bw))
++#define INTERLEAVED_VAL(fab_pdata, n) \
++ ((fab_pdata->il_flag) ? (n) : 1)
++#define KBTOB(a) (a * 1000ULL)
++
++enum msm_bus_dbg_op_type {
++ MSM_BUS_DBG_UNREGISTER = -2,
++ MSM_BUS_DBG_REGISTER,
++ MSM_BUS_DBG_OP = 1,
++};
++
++enum msm_bus_hw_sel {
++ MSM_BUS_RPM = 0,
++ MSM_BUS_NOC,
++ MSM_BUS_BIMC,
++};
++
++struct msm_bus_arb_ops {
++ uint32_t (*register_client)(struct msm_bus_scale_pdata *pdata);
++ int (*update_request)(uint32_t cl, unsigned int index);
++ void (*unregister_client)(uint32_t cl);
++};
++
++enum {
++ SLAVE_NODE,
++ MASTER_NODE,
++ CLK_NODE,
++ NR_LIM_NODE,
++};
++
++
++extern struct bus_type msm_bus_type;
++extern struct msm_bus_arb_ops arb_ops;
++extern void msm_bus_arb_setops_legacy(struct msm_bus_arb_ops *arb_ops);
++
++struct msm_bus_node_info {
++ unsigned int id;
++ unsigned int priv_id;
++ unsigned int mas_hw_id;
++ unsigned int slv_hw_id;
++ int gateway;
++ int *masterp;
++ int *qport;
++ int num_mports;
++ int *slavep;
++ int num_sports;
++ int *tier;
++ int num_tiers;
++ int ahb;
++ int hw_sel;
++ const char *slaveclk[NUM_CTX];
++ const char *memclk[NUM_CTX];
++ const char *iface_clk_node;
++ unsigned int buswidth;
++ unsigned int ws;
++ unsigned int mode;
++ unsigned int perm_mode;
++ unsigned int prio_lvl;
++ unsigned int prio_rd;
++ unsigned int prio_wr;
++ unsigned int prio1;
++ unsigned int prio0;
++ unsigned int num_thresh;
++ u64 *th;
++ u64 cur_lim_bw;
++ unsigned int mode_thresh;
++ bool dual_conf;
++ u64 *bimc_bw;
++ bool nr_lim;
++ u32 ff;
++ bool rt_mas;
++ u32 bimc_gp;
++ u32 bimc_thmp;
++ u64 floor_bw;
++ const char *name;
++};
++
++struct path_node {
++ uint64_t clk[NUM_CTX];
++ uint64_t bw[NUM_CTX];
++ uint64_t *sel_clk;
++ uint64_t *sel_bw;
++ int next;
++};
++
++struct msm_bus_link_info {
++ uint64_t clk[NUM_CTX];
++ uint64_t *sel_clk;
++ uint64_t memclk;
++ int64_t bw[NUM_CTX];
++ int64_t *sel_bw;
++ int *tier;
++ int num_tiers;
++};
++
++struct nodeclk {
++ struct clk *clk;
++ uint64_t rate;
++ bool dirty;
++ bool enable;
++};
++
++struct msm_bus_inode_info {
++ struct msm_bus_node_info *node_info;
++ uint64_t max_bw;
++ uint64_t max_clk;
++ uint64_t cur_lim_bw;
++ uint64_t cur_prg_bw;
++ struct msm_bus_link_info link_info;
++ int num_pnodes;
++ struct path_node *pnode;
++ int commit_index;
++ struct nodeclk nodeclk[NUM_CTX];
++ struct nodeclk memclk[NUM_CTX];
++ struct nodeclk iface_clk;
++ void *hw_data;
++};
++
++struct msm_bus_node_hw_info {
++ bool dirty;
++ unsigned int hw_id;
++ uint64_t bw;
++};
++
++struct msm_bus_hw_algorithm {
++ int (*allocate_commit_data)(struct msm_bus_fabric_registration
++ *fab_pdata, void **cdata, int ctx);
++ void *(*allocate_hw_data)(struct platform_device *pdev,
++ struct msm_bus_fabric_registration *fab_pdata);
++ void (*node_init)(void *hw_data, struct msm_bus_inode_info *info);
++ void (*free_commit_data)(void *cdata);
++ void (*update_bw)(struct msm_bus_inode_info *hop,
++ struct msm_bus_inode_info *info,
++ struct msm_bus_fabric_registration *fab_pdata,
++ void *sel_cdata, int *master_tiers,
++ int64_t add_bw);
++ void (*fill_cdata_buffer)(int *curr, char *buf, const int max_size,
++ void *cdata, int nmasters, int nslaves, int ntslaves);
++ int (*commit)(struct msm_bus_fabric_registration
++ *fab_pdata, void *hw_data, void **cdata);
++ int (*port_unhalt)(uint32_t haltid, uint8_t mport);
++ int (*port_halt)(uint32_t haltid, uint8_t mport);
++ void (*config_master)(struct msm_bus_fabric_registration *fab_pdata,
++ struct msm_bus_inode_info *info,
++ uint64_t req_clk, uint64_t req_bw);
++ void (*config_limiter)(struct msm_bus_fabric_registration *fab_pdata,
++ struct msm_bus_inode_info *info);
++ bool (*update_bw_reg)(int mode);
++};
++
++struct msm_bus_fabric_device {
++ int id;
++ const char *name;
++ struct device dev;
++ const struct msm_bus_fab_algorithm *algo;
++ const struct msm_bus_board_algorithm *board_algo;
++ struct msm_bus_hw_algorithm hw_algo;
++ int visited;
++ int num_nr_lim;
++ u64 nr_lim_thresh;
++ u32 eff_fact;
++};
++#define to_msm_bus_fabric_device(d) container_of(d, \
++ struct msm_bus_fabric_device, d)
++
++struct msm_bus_fabric {
++ struct msm_bus_fabric_device fabdev;
++ int ahb;
++ void *cdata[NUM_CTX];
++ bool arb_dirty;
++ bool clk_dirty;
++ struct radix_tree_root fab_tree;
++ int num_nodes;
++ struct list_head gateways;
++ struct msm_bus_inode_info info;
++ struct msm_bus_fabric_registration *pdata;
++ void *hw_data;
++};
++#define to_msm_bus_fabric(d) container_of(d, \
++ struct msm_bus_fabric, d)
++
++
++struct msm_bus_fab_algorithm {
++ int (*update_clks)(struct msm_bus_fabric_device *fabdev,
++ struct msm_bus_inode_info *pme, int index,
++ uint64_t curr_clk, uint64_t req_clk,
++ uint64_t bwsum, int flag, int ctx,
++ unsigned int cl_active_flag);
++ int (*port_halt)(struct msm_bus_fabric_device *fabdev, int portid);
++ int (*port_unhalt)(struct msm_bus_fabric_device *fabdev, int portid);
++ int (*commit)(struct msm_bus_fabric_device *fabdev);
++ struct msm_bus_inode_info *(*find_node)(struct msm_bus_fabric_device
++ *fabdev, int id);
++ struct msm_bus_inode_info *(*find_gw_node)(struct msm_bus_fabric_device
++ *fabdev, int id);
++ struct list_head *(*get_gw_list)(struct msm_bus_fabric_device *fabdev);
++ void (*update_bw)(struct msm_bus_fabric_device *fabdev, struct
++ msm_bus_inode_info * hop, struct msm_bus_inode_info *info,
++ int64_t add_bw, int *master_tiers, int ctx);
++ void (*config_master)(struct msm_bus_fabric_device *fabdev,
++ struct msm_bus_inode_info *info, uint64_t req_clk,
++ uint64_t req_bw);
++ void (*config_limiter)(struct msm_bus_fabric_device *fabdev,
++ struct msm_bus_inode_info *info);
++};
++
++struct msm_bus_board_algorithm {
++ int board_nfab;
++ void (*assign_iids)(struct msm_bus_fabric_registration *fabreg,
++ int fabid);
++ int (*get_iid)(int id);
++};
++
++/**
++ * Used to store the list of fabrics and other info to be
++ * maintained outside the fabric structure.
++ * Used while calculating path, and to find fabric ptrs
++ */
++struct msm_bus_fabnodeinfo {
++ struct list_head list;
++ struct msm_bus_inode_info *info;
++};
++
++struct msm_bus_client {
++ int id;
++ struct msm_bus_scale_pdata *pdata;
++ int *src_pnode;
++ int curr;
++};
++
++uint64_t msm_bus_div64(unsigned int width, uint64_t bw);
++int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabric);
++void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabric);
++struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid);
++int msm_bus_get_num_fab(void);
++
++
++int msm_bus_hw_fab_init(struct msm_bus_fabric_registration *pdata,
++ struct msm_bus_hw_algorithm *hw_algo);
++void msm_bus_board_init(struct msm_bus_fabric_registration *pdata);
++void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata,
++ int nfab);
++#if defined(CONFIG_MSM_RPM_SMD)
++int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata,
++ struct msm_bus_hw_algorithm *hw_algo);
++int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration
++ *fab_pdata, void *hw_data, void **cdata);
++void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf, const int max_size,
++ void *cdata, int nmasters, int nslaves, int ntslaves);
++#else
++static inline int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata,
++ struct msm_bus_hw_algorithm *hw_algo)
++{
++ return 0;
++}
++static inline int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration
++ *fab_pdata, void *hw_data, void **cdata)
++{
++ return 0;
++}
++static inline void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf,
++ const int max_size, void *cdata, int nmasters, int nslaves,
++ int ntslaves)
++{
++}
++#endif
++
++int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata,
++ struct msm_bus_hw_algorithm *hw_algo);
++int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata,
++ struct msm_bus_hw_algorithm *hw_algo);
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index,
++ uint32_t cl);
++void msm_bus_dbg_commit_data(const char *fabname, void *cdata,
++ int nmasters, int nslaves, int ntslaves, int op);
++#else
++static inline void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata,
++ int index, uint32_t cl)
++{
++}
++static inline void msm_bus_dbg_commit_data(const char *fabname,
++ void *cdata, int nmasters, int nslaves, int ntslaves,
++ int op)
++{
++}
++#endif
++
++#ifdef CONFIG_CORESIGHT
++int msmbus_coresight_init(struct platform_device *pdev);
++void msmbus_coresight_remove(struct platform_device *pdev);
++int msmbus_coresight_init_adhoc(struct platform_device *pdev,
++ struct device_node *of_node);
++void msmbus_coresight_remove_adhoc(struct platform_device *pdev);
++#else
++static inline int msmbus_coresight_init(struct platform_device *pdev)
++{
++ return 0;
++}
++
++static inline void msmbus_coresight_remove(struct platform_device *pdev)
++{
++}
++
++static inline int msmbus_coresight_init_adhoc(struct platform_device *pdev,
++ struct device_node *of_node)
++{
++ return 0;
++}
++
++static inline void msmbus_coresight_remove_adhoc(struct platform_device *pdev)
++{
++}
++#endif
++
++
++#ifdef CONFIG_OF
++void msm_bus_of_get_nfab(struct platform_device *pdev,
++ struct msm_bus_fabric_registration *pdata);
++struct msm_bus_fabric_registration
++ *msm_bus_of_get_fab_data(struct platform_device *pdev);
++#else
++static inline void msm_bus_of_get_nfab(struct platform_device *pdev,
++ struct msm_bus_fabric_registration *pdata)
++{
++ return;
++}
++
++static inline struct msm_bus_fabric_registration
++ *msm_bus_of_get_fab_data(struct platform_device *pdev)
++{
++ return NULL;
++}
++#endif
++
++#endif /*_ARCH_ARM_MACH_MSM_BUS_CORE_H*/
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_dbg.c
+@@ -0,0 +1,810 @@
++/* Copyright (c) 2010-2012, 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/seq_file.h>
++#include <linux/debugfs.h>
++#include <linux/slab.h>
++#include <linux/mutex.h>
++#include <linux/string.h>
++#include <linux/uaccess.h>
++#include <linux/hrtimer.h>
++#include "msm-bus-board.h"
++#include "msm-bus.h"
++#include "msm_bus_rules.h"
++#include "msm_bus_core.h"
++#include "msm_bus_adhoc.h"
++
++#define CREATE_TRACE_POINTS
++#include <trace/events/trace_msm_bus.h>
++
++#define MAX_BUFF_SIZE 4096
++#define FILL_LIMIT 128
++
++static struct dentry *clients;
++static struct dentry *dir;
++static DEFINE_MUTEX(msm_bus_dbg_fablist_lock);
++struct msm_bus_dbg_state {
++ uint32_t cl;
++ uint8_t enable;
++ uint8_t current_index;
++} clstate;
++
++struct msm_bus_cldata {
++ const struct msm_bus_scale_pdata *pdata;
++ int index;
++ uint32_t clid;
++ int size;
++ struct dentry *file;
++ struct list_head list;
++ char buffer[MAX_BUFF_SIZE];
++};
++
++struct msm_bus_fab_list {
++ const char *name;
++ int size;
++ struct dentry *file;
++ struct list_head list;
++ char buffer[MAX_BUFF_SIZE];
++};
++
++static char *rules_buf;
++
++LIST_HEAD(fabdata_list);
++LIST_HEAD(cl_list);
++
++/**
++ * The following structures and funtions are used for
++ * the test-client which can be created at run-time.
++ */
++
++static struct msm_bus_vectors init_vectors[1];
++static struct msm_bus_vectors current_vectors[1];
++static struct msm_bus_vectors requested_vectors[1];
++
++static struct msm_bus_paths shell_client_usecases[] = {
++ {
++ .num_paths = ARRAY_SIZE(init_vectors),
++ .vectors = init_vectors,
++ },
++ {
++ .num_paths = ARRAY_SIZE(current_vectors),
++ .vectors = current_vectors,
++ },
++ {
++ .num_paths = ARRAY_SIZE(requested_vectors),
++ .vectors = requested_vectors,
++ },
++};
++
++static struct msm_bus_scale_pdata shell_client = {
++ .usecase = shell_client_usecases,
++ .num_usecases = ARRAY_SIZE(shell_client_usecases),
++ .name = "test-client",
++};
++
++static void msm_bus_dbg_init_vectors(void)
++{
++ init_vectors[0].src = -1;
++ init_vectors[0].dst = -1;
++ init_vectors[0].ab = 0;
++ init_vectors[0].ib = 0;
++ current_vectors[0].src = -1;
++ current_vectors[0].dst = -1;
++ current_vectors[0].ab = 0;
++ current_vectors[0].ib = 0;
++ requested_vectors[0].src = -1;
++ requested_vectors[0].dst = -1;
++ requested_vectors[0].ab = 0;
++ requested_vectors[0].ib = 0;
++ clstate.enable = 0;
++ clstate.current_index = 0;
++}
++
++static int msm_bus_dbg_update_cl_request(uint32_t cl)
++{
++ int ret = 0;
++
++ if (clstate.current_index < 2)
++ clstate.current_index = 2;
++ else {
++ clstate.current_index = 1;
++ current_vectors[0].ab = requested_vectors[0].ab;
++ current_vectors[0].ib = requested_vectors[0].ib;
++ }
++
++ if (clstate.enable) {
++ MSM_BUS_DBG("Updating request for shell client, index: %d\n",
++ clstate.current_index);
++ ret = msm_bus_scale_client_update_request(clstate.cl,
++ clstate.current_index);
++ } else
++ MSM_BUS_DBG("Enable bit not set. Skipping update request\n");
++
++ return ret;
++}
++
++static void msm_bus_dbg_unregister_client(uint32_t cl)
++{
++ MSM_BUS_DBG("Unregistering shell client\n");
++ msm_bus_scale_unregister_client(clstate.cl);
++ clstate.cl = 0;
++}
++
++static uint32_t msm_bus_dbg_register_client(void)
++{
++ int ret = 0;
++
++ if (init_vectors[0].src != requested_vectors[0].src) {
++ MSM_BUS_DBG("Shell client master changed. Unregistering\n");
++ msm_bus_dbg_unregister_client(clstate.cl);
++ }
++ if (init_vectors[0].dst != requested_vectors[0].dst) {
++ MSM_BUS_DBG("Shell client slave changed. Unregistering\n");
++ msm_bus_dbg_unregister_client(clstate.cl);
++ }
++
++ current_vectors[0].src = init_vectors[0].src;
++ requested_vectors[0].src = init_vectors[0].src;
++ current_vectors[0].dst = init_vectors[0].dst;
++ requested_vectors[0].dst = init_vectors[0].dst;
++
++ if (!clstate.enable) {
++ MSM_BUS_DBG("Enable bit not set, skipping registration: cl "
++ "%d\n", clstate.cl);
++ return 0;
++ }
++
++ if (clstate.cl) {
++ MSM_BUS_DBG("Client registered, skipping registration\n");
++ return clstate.cl;
++ }
++
++ MSM_BUS_DBG("Registering shell client\n");
++ ret = msm_bus_scale_register_client(&shell_client);
++ return ret;
++}
++
++static int msm_bus_dbg_mas_get(void *data, u64 *val)
++{
++ *val = init_vectors[0].src;
++ MSM_BUS_DBG("Get master: %llu\n", *val);
++ return 0;
++}
++
++static int msm_bus_dbg_mas_set(void *data, u64 val)
++{
++ init_vectors[0].src = val;
++ MSM_BUS_DBG("Set master: %llu\n", val);
++ clstate.cl = msm_bus_dbg_register_client();
++ return 0;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_mas_fops, msm_bus_dbg_mas_get,
++ msm_bus_dbg_mas_set, "%llu\n");
++
++static int msm_bus_dbg_slv_get(void *data, u64 *val)
++{
++ *val = init_vectors[0].dst;
++ MSM_BUS_DBG("Get slave: %llu\n", *val);
++ return 0;
++}
++
++static int msm_bus_dbg_slv_set(void *data, u64 val)
++{
++ init_vectors[0].dst = val;
++ MSM_BUS_DBG("Set slave: %llu\n", val);
++ clstate.cl = msm_bus_dbg_register_client();
++ return 0;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_slv_fops, msm_bus_dbg_slv_get,
++ msm_bus_dbg_slv_set, "%llu\n");
++
++static int msm_bus_dbg_ab_get(void *data, u64 *val)
++{
++ *val = requested_vectors[0].ab;
++ MSM_BUS_DBG("Get ab: %llu\n", *val);
++ return 0;
++}
++
++static int msm_bus_dbg_ab_set(void *data, u64 val)
++{
++ requested_vectors[0].ab = val;
++ MSM_BUS_DBG("Set ab: %llu\n", val);
++ return 0;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_ab_fops, msm_bus_dbg_ab_get,
++ msm_bus_dbg_ab_set, "%llu\n");
++
++static int msm_bus_dbg_ib_get(void *data, u64 *val)
++{
++ *val = requested_vectors[0].ib;
++ MSM_BUS_DBG("Get ib: %llu\n", *val);
++ return 0;
++}
++
++static int msm_bus_dbg_ib_set(void *data, u64 val)
++{
++ requested_vectors[0].ib = val;
++ MSM_BUS_DBG("Set ib: %llu\n", val);
++ return 0;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_ib_fops, msm_bus_dbg_ib_get,
++ msm_bus_dbg_ib_set, "%llu\n");
++
++static int msm_bus_dbg_en_get(void *data, u64 *val)
++{
++ *val = clstate.enable;
++ MSM_BUS_DBG("Get enable: %llu\n", *val);
++ return 0;
++}
++
++static int msm_bus_dbg_en_set(void *data, u64 val)
++{
++ int ret = 0;
++
++ clstate.enable = val;
++ if (clstate.enable) {
++ if (!clstate.cl) {
++ MSM_BUS_DBG("client: %u\n", clstate.cl);
++ clstate.cl = msm_bus_dbg_register_client();
++ if (clstate.cl)
++ ret = msm_bus_dbg_update_cl_request(clstate.cl);
++ } else {
++ MSM_BUS_DBG("update request for cl: %u\n", clstate.cl);
++ ret = msm_bus_dbg_update_cl_request(clstate.cl);
++ }
++ }
++
++ MSM_BUS_DBG("Set enable: %llu\n", val);
++ return ret;
++}
++DEFINE_SIMPLE_ATTRIBUTE(shell_client_en_fops, msm_bus_dbg_en_get,
++ msm_bus_dbg_en_set, "%llu\n");
++
++/**
++ * The following funtions are used for viewing the client data
++ * and changing the client request at run-time
++ */
++
++static ssize_t client_data_read(struct file *file, char __user *buf,
++ size_t count, loff_t *ppos)
++{
++ int bsize = 0;
++ uint32_t cl = (uint32_t)(uintptr_t)file->private_data;
++ struct msm_bus_cldata *cldata = NULL;
++ int found = 0;
++
++ list_for_each_entry(cldata, &cl_list, list) {
++ if (cldata->clid == cl) {
++ found = 1;
++ break;
++ }
++ }
++ if (!found)
++ return 0;
++
++ bsize = cldata->size;
++ return simple_read_from_buffer(buf, count, ppos,
++ cldata->buffer, bsize);
++}
++
++static int client_data_open(struct inode *inode, struct file *file)
++{
++ file->private_data = inode->i_private;
++ return 0;
++}
++
++static const struct file_operations client_data_fops = {
++ .open = client_data_open,
++ .read = client_data_read,
++};
++
++struct dentry *msm_bus_dbg_create(const char *name, mode_t mode,
++ struct dentry *dent, uint32_t clid)
++{
++ if (dent == NULL) {
++ MSM_BUS_DBG("debugfs not ready yet\n");
++ return NULL;
++ }
++ return debugfs_create_file(name, mode, dent, (void *)(uintptr_t)clid,
++ &client_data_fops);
++}
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++static int msm_bus_dbg_record_client(const struct msm_bus_scale_pdata *pdata,
++ int index, uint32_t clid, struct dentry *file)
++{
++ struct msm_bus_cldata *cldata;
++
++ cldata = kmalloc(sizeof(struct msm_bus_cldata), GFP_KERNEL);
++ if (!cldata) {
++ MSM_BUS_DBG("Failed to allocate memory for client data\n");
++ return -ENOMEM;
++ }
++ cldata->pdata = pdata;
++ cldata->index = index;
++ cldata->clid = clid;
++ cldata->file = file;
++ cldata->size = 0;
++ list_add_tail(&cldata->list, &cl_list);
++ return 0;
++}
++
++static void msm_bus_dbg_free_client(uint32_t clid)
++{
++ struct msm_bus_cldata *cldata = NULL;
++
++ list_for_each_entry(cldata, &cl_list, list) {
++ if (cldata->clid == clid) {
++ debugfs_remove(cldata->file);
++ list_del(&cldata->list);
++ kfree(cldata);
++ break;
++ }
++ }
++}
++
++static int msm_bus_dbg_fill_cl_buffer(const struct msm_bus_scale_pdata *pdata,
++ int index, uint32_t clid)
++{
++ int i = 0, j;
++ char *buf = NULL;
++ struct msm_bus_cldata *cldata = NULL;
++ struct timespec ts;
++ int found = 0;
++
++ list_for_each_entry(cldata, &cl_list, list) {
++ if (cldata->clid == clid) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (!found)
++ return -ENOENT;
++
++ if (cldata->file == NULL) {
++ if (pdata->name == NULL) {
++ MSM_BUS_DBG("Client doesn't have a name\n");
++ return -EINVAL;
++ }
++ cldata->file = msm_bus_dbg_create(pdata->name, S_IRUGO,
++ clients, clid);
++ }
++
++ if (cldata->size < (MAX_BUFF_SIZE - FILL_LIMIT))
++ i = cldata->size;
++ else {
++ i = 0;
++ cldata->size = 0;
++ }
++ buf = cldata->buffer;
++ ts = ktime_to_timespec(ktime_get());
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n",
++ (int)ts.tv_sec, (int)ts.tv_nsec);
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "curr : %d\n", index);
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "masters: ");
++
++ for (j = 0; j < pdata->usecase->num_paths; j++)
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d ",
++ pdata->usecase[index].vectors[j].src);
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nslaves : ");
++ for (j = 0; j < pdata->usecase->num_paths; j++)
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d ",
++ pdata->usecase[index].vectors[j].dst);
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nab : ");
++ for (j = 0; j < pdata->usecase->num_paths; j++)
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu ",
++ pdata->usecase[index].vectors[j].ab);
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nib : ");
++ for (j = 0; j < pdata->usecase->num_paths; j++)
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu ",
++ pdata->usecase[index].vectors[j].ib);
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n");
++
++ for (j = 0; j < pdata->usecase->num_paths; j++)
++ trace_bus_update_request((int)ts.tv_sec, (int)ts.tv_nsec,
++ pdata->name, index,
++ pdata->usecase[index].vectors[j].src,
++ pdata->usecase[index].vectors[j].dst,
++ pdata->usecase[index].vectors[j].ab,
++ pdata->usecase[index].vectors[j].ib);
++
++ cldata->size = i;
++ return i;
++}
++#endif
++
++static int msm_bus_dbg_update_request(struct msm_bus_cldata *cldata, int index)
++{
++ int ret = 0;
++
++ if ((index < 0) || (index > cldata->pdata->num_usecases)) {
++ MSM_BUS_DBG("Invalid index!\n");
++ return -EINVAL;
++ }
++ ret = msm_bus_scale_client_update_request(cldata->clid, index);
++ return ret;
++}
++
++static ssize_t msm_bus_dbg_update_request_write(struct file *file,
++ const char __user *ubuf, size_t cnt, loff_t *ppos)
++{
++ struct msm_bus_cldata *cldata;
++ unsigned long index = 0;
++ int ret = 0;
++ char *chid;
++ char *buf = kmalloc((sizeof(char) * (cnt + 1)), GFP_KERNEL);
++ int found = 0;
++
++ if (!buf || IS_ERR(buf)) {
++ MSM_BUS_ERR("Memory allocation for buffer failed\n");
++ return -ENOMEM;
++ }
++ if (cnt == 0) {
++ kfree(buf);
++ return 0;
++ }
++ if (copy_from_user(buf, ubuf, cnt)) {
++ kfree(buf);
++ return -EFAULT;
++ }
++ buf[cnt] = '\0';
++ chid = buf;
++ MSM_BUS_DBG("buffer: %s\n size: %zu\n", buf, sizeof(ubuf));
++
++ list_for_each_entry(cldata, &cl_list, list) {
++ if (strnstr(chid, cldata->pdata->name, cnt)) {
++ found = 1;
++ cldata = cldata;
++ strsep(&chid, " ");
++ if (chid) {
++ ret = kstrtoul(chid, 10, &index);
++ if (ret) {
++ MSM_BUS_DBG("Index conversion"
++ " failed\n");
++ return -EFAULT;
++ }
++ } else {
++ MSM_BUS_DBG("Error parsing input. Index not"
++ " found\n");
++ found = 0;
++ }
++ break;
++ }
++ }
++
++ if (found)
++ msm_bus_dbg_update_request(cldata, index);
++ kfree(buf);
++ return cnt;
++}
++
++/**
++ * The following funtions are used for viewing the commit data
++ * for each fabric
++ */
++static ssize_t fabric_data_read(struct file *file, char __user *buf,
++ size_t count, loff_t *ppos)
++{
++ struct msm_bus_fab_list *fablist = NULL;
++ int bsize = 0;
++ ssize_t ret;
++ const char *name = file->private_data;
++ int found = 0;
++
++ mutex_lock(&msm_bus_dbg_fablist_lock);
++ list_for_each_entry(fablist, &fabdata_list, list) {
++ if (strcmp(fablist->name, name) == 0) {
++ found = 1;
++ break;
++ }
++ }
++ if (!found)
++ return -ENOENT;
++ bsize = fablist->size;
++ ret = simple_read_from_buffer(buf, count, ppos,
++ fablist->buffer, bsize);
++ mutex_unlock(&msm_bus_dbg_fablist_lock);
++ return ret;
++}
++
++static const struct file_operations fabric_data_fops = {
++ .open = client_data_open,
++ .read = fabric_data_read,
++};
++
++static ssize_t rules_dbg_read(struct file *file, char __user *buf,
++ size_t count, loff_t *ppos)
++{
++ ssize_t ret;
++ memset(rules_buf, 0, MAX_BUFF_SIZE);
++ print_rules_buf(rules_buf, MAX_BUFF_SIZE);
++ ret = simple_read_from_buffer(buf, count, ppos,
++ rules_buf, MAX_BUFF_SIZE);
++ return ret;
++}
++
++static int rules_dbg_open(struct inode *inode, struct file *file)
++{
++ file->private_data = inode->i_private;
++ return 0;
++}
++
++static const struct file_operations rules_dbg_fops = {
++ .open = rules_dbg_open,
++ .read = rules_dbg_read,
++};
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++static int msm_bus_dbg_record_fabric(const char *fabname, struct dentry *file)
++{
++ struct msm_bus_fab_list *fablist;
++ int ret = 0;
++
++ mutex_lock(&msm_bus_dbg_fablist_lock);
++ fablist = kmalloc(sizeof(struct msm_bus_fab_list), GFP_KERNEL);
++ if (!fablist) {
++ MSM_BUS_DBG("Failed to allocate memory for commit data\n");
++ ret = -ENOMEM;
++ goto err;
++ }
++
++ fablist->name = fabname;
++ fablist->size = 0;
++ list_add_tail(&fablist->list, &fabdata_list);
++err:
++ mutex_unlock(&msm_bus_dbg_fablist_lock);
++ return ret;
++}
++
++static void msm_bus_dbg_free_fabric(const char *fabname)
++{
++ struct msm_bus_fab_list *fablist = NULL;
++
++ mutex_lock(&msm_bus_dbg_fablist_lock);
++ list_for_each_entry(fablist, &fabdata_list, list) {
++ if (strcmp(fablist->name, fabname) == 0) {
++ debugfs_remove(fablist->file);
++ list_del(&fablist->list);
++ kfree(fablist);
++ break;
++ }
++ }
++ mutex_unlock(&msm_bus_dbg_fablist_lock);
++}
++
++static int msm_bus_dbg_fill_fab_buffer(const char *fabname,
++ void *cdata, int nmasters, int nslaves,
++ int ntslaves)
++{
++ int i;
++ char *buf = NULL;
++ struct msm_bus_fab_list *fablist = NULL;
++ struct timespec ts;
++ int found = 0;
++
++ mutex_lock(&msm_bus_dbg_fablist_lock);
++ list_for_each_entry(fablist, &fabdata_list, list) {
++ if (strcmp(fablist->name, fabname) == 0) {
++ found = 1;
++ break;
++ }
++ }
++ if (!found)
++ return -ENOENT;
++
++ if (fablist->file == NULL) {
++ MSM_BUS_DBG("Fabric dbg entry does not exist\n");
++ mutex_unlock(&msm_bus_dbg_fablist_lock);
++ return -EFAULT;
++ }
++
++ if (fablist->size < MAX_BUFF_SIZE - 256)
++ i = fablist->size;
++ else {
++ i = 0;
++ fablist->size = 0;
++ }
++ buf = fablist->buffer;
++ mutex_unlock(&msm_bus_dbg_fablist_lock);
++ ts = ktime_to_timespec(ktime_get());
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n",
++ (int)ts.tv_sec, (int)ts.tv_nsec);
++
++ msm_bus_rpm_fill_cdata_buffer(&i, buf, MAX_BUFF_SIZE, cdata,
++ nmasters, nslaves, ntslaves);
++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n");
++ mutex_lock(&msm_bus_dbg_fablist_lock);
++ fablist->size = i;
++ mutex_unlock(&msm_bus_dbg_fablist_lock);
++ return 0;
++}
++#endif
++
++static const struct file_operations msm_bus_dbg_update_request_fops = {
++ .open = client_data_open,
++ .write = msm_bus_dbg_update_request_write,
++};
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++/**
++ * msm_bus_dbg_client_data() - Add debug data for clients
++ * @pdata: Platform data of the client
++ * @index: The current index or operation to be performed
++ * @clid: Client handle obtained during registration
++ */
++void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index,
++ uint32_t clid)
++{
++ struct dentry *file = NULL;
++
++ if (index == MSM_BUS_DBG_REGISTER) {
++ msm_bus_dbg_record_client(pdata, index, clid, file);
++ if (!pdata->name) {
++ MSM_BUS_DBG("Cannot create debugfs entry. Null name\n");
++ return;
++ }
++ } else if (index == MSM_BUS_DBG_UNREGISTER) {
++ msm_bus_dbg_free_client(clid);
++ MSM_BUS_DBG("Client %d unregistered\n", clid);
++ } else
++ msm_bus_dbg_fill_cl_buffer(pdata, index, clid);
++}
++EXPORT_SYMBOL(msm_bus_dbg_client_data);
++
++/**
++ * msm_bus_dbg_commit_data() - Add commit data from fabrics
++ * @fabname: Fabric name specified in platform data
++ * @cdata: Commit Data
++ * @nmasters: Number of masters attached to fabric
++ * @nslaves: Number of slaves attached to fabric
++ * @ntslaves: Number of tiered slaves attached to fabric
++ * @op: Operation to be performed
++ */
++void msm_bus_dbg_commit_data(const char *fabname, void *cdata,
++ int nmasters, int nslaves, int ntslaves, int op)
++{
++ struct dentry *file = NULL;
++
++ if (op == MSM_BUS_DBG_REGISTER)
++ msm_bus_dbg_record_fabric(fabname, file);
++ else if (op == MSM_BUS_DBG_UNREGISTER)
++ msm_bus_dbg_free_fabric(fabname);
++ else
++ msm_bus_dbg_fill_fab_buffer(fabname, cdata, nmasters,
++ nslaves, ntslaves);
++}
++EXPORT_SYMBOL(msm_bus_dbg_commit_data);
++#endif
++
++static int __init msm_bus_debugfs_init(void)
++{
++ struct dentry *commit, *shell_client, *rules_dbg;
++ struct msm_bus_fab_list *fablist;
++ struct msm_bus_cldata *cldata = NULL;
++ uint64_t val = 0;
++
++ dir = debugfs_create_dir("msm-bus-dbg", NULL);
++ if ((!dir) || IS_ERR(dir)) {
++ MSM_BUS_ERR("Couldn't create msm-bus-dbg\n");
++ goto err;
++ }
++
++ clients = debugfs_create_dir("client-data", dir);
++ if ((!dir) || IS_ERR(dir)) {
++ MSM_BUS_ERR("Couldn't create clients\n");
++ goto err;
++ }
++
++ shell_client = debugfs_create_dir("shell-client", dir);
++ if ((!dir) || IS_ERR(dir)) {
++ MSM_BUS_ERR("Couldn't create clients\n");
++ goto err;
++ }
++
++ commit = debugfs_create_dir("commit-data", dir);
++ if ((!dir) || IS_ERR(dir)) {
++ MSM_BUS_ERR("Couldn't create commit\n");
++ goto err;
++ }
++
++ rules_dbg = debugfs_create_dir("rules-dbg", dir);
++ if ((!rules_dbg) || IS_ERR(rules_dbg)) {
++ MSM_BUS_ERR("Couldn't create rules-dbg\n");
++ goto err;
++ }
++
++ if (debugfs_create_file("print_rules", S_IRUGO | S_IWUSR,
++ rules_dbg, &val, &rules_dbg_fops) == NULL)
++ goto err;
++
++ if (debugfs_create_file("update_request", S_IRUGO | S_IWUSR,
++ shell_client, &val, &shell_client_en_fops) == NULL)
++ goto err;
++ if (debugfs_create_file("ib", S_IRUGO | S_IWUSR, shell_client, &val,
++ &shell_client_ib_fops) == NULL)
++ goto err;
++ if (debugfs_create_file("ab", S_IRUGO | S_IWUSR, shell_client, &val,
++ &shell_client_ab_fops) == NULL)
++ goto err;
++ if (debugfs_create_file("slv", S_IRUGO | S_IWUSR, shell_client,
++ &val, &shell_client_slv_fops) == NULL)
++ goto err;
++ if (debugfs_create_file("mas", S_IRUGO | S_IWUSR, shell_client,
++ &val, &shell_client_mas_fops) == NULL)
++ goto err;
++ if (debugfs_create_file("update-request", S_IRUGO | S_IWUSR,
++ clients, NULL, &msm_bus_dbg_update_request_fops) == NULL)
++ goto err;
++
++ rules_buf = kzalloc(MAX_BUFF_SIZE, GFP_KERNEL);
++ if (!rules_buf) {
++ MSM_BUS_ERR("Failed to alloc rules_buf");
++ goto err;
++ }
++
++ list_for_each_entry(cldata, &cl_list, list) {
++ if (cldata->pdata->name == NULL) {
++ MSM_BUS_DBG("Client name not found\n");
++ continue;
++ }
++ cldata->file = msm_bus_dbg_create(cldata->
++ pdata->name, S_IRUGO, clients, cldata->clid);
++ }
++
++ mutex_lock(&msm_bus_dbg_fablist_lock);
++ list_for_each_entry(fablist, &fabdata_list, list) {
++ fablist->file = debugfs_create_file(fablist->name, S_IRUGO,
++ commit, (void *)fablist->name, &fabric_data_fops);
++ if (fablist->file == NULL) {
++ MSM_BUS_DBG("Cannot create files for commit data\n");
++ kfree(rules_buf);
++ goto err;
++ }
++ }
++ mutex_unlock(&msm_bus_dbg_fablist_lock);
++
++ msm_bus_dbg_init_vectors();
++ return 0;
++err:
++ debugfs_remove_recursive(dir);
++ return -ENODEV;
++}
++late_initcall(msm_bus_debugfs_init);
++
++static void __exit msm_bus_dbg_teardown(void)
++{
++ struct msm_bus_fab_list *fablist = NULL, *fablist_temp;
++ struct msm_bus_cldata *cldata = NULL, *cldata_temp;
++
++ debugfs_remove_recursive(dir);
++ list_for_each_entry_safe(cldata, cldata_temp, &cl_list, list) {
++ list_del(&cldata->list);
++ kfree(cldata);
++ }
++ mutex_lock(&msm_bus_dbg_fablist_lock);
++ list_for_each_entry_safe(fablist, fablist_temp, &fabdata_list, list) {
++ list_del(&fablist->list);
++ kfree(fablist);
++ }
++ kfree(rules_buf);
++ mutex_unlock(&msm_bus_dbg_fablist_lock);
++}
++module_exit(msm_bus_dbg_teardown);
++MODULE_DESCRIPTION("Debugfs for msm bus scaling client");
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Gagan Mac <gmac@codeaurora.org>");
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_fabric_adhoc.c
+@@ -0,0 +1,1281 @@
++/* Copyright (c) 2014, Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include "rpm-smd.h"
++#include "msm_bus_core.h"
++#include "msm_bus_adhoc.h"
++#include "msm_bus_noc.h"
++#include "msm_bus_bimc.h"
++
++ssize_t vrail_show(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct msm_bus_node_info_type *node_info = NULL;
++ struct msm_bus_node_device_type *bus_node = NULL;
++
++ bus_node = dev->platform_data;
++ if (!bus_node)
++ return -EINVAL;
++ node_info = bus_node->node_info;
++
++ return snprintf(buf, PAGE_SIZE, "%u", node_info->vrail_comp);
++}
++
++ssize_t vrail_store(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct msm_bus_node_info_type *node_info = NULL;
++ struct msm_bus_node_device_type *bus_node = NULL;
++ int ret = 0;
++
++ bus_node = dev->platform_data;
++ if (!bus_node)
++ return -EINVAL;
++ node_info = bus_node->node_info;
++
++ ret = sscanf(buf, "%u", &node_info->vrail_comp);
++ if (ret != 1)
++ return -EINVAL;
++ return count;
++}
++
++DEVICE_ATTR(vrail, 0600, vrail_show, vrail_store);
++
++struct static_rules_type {
++ int num_rules;
++ struct bus_rule_type *rules;
++};
++
++static struct static_rules_type static_rules;
++
++static int enable_nodeclk(struct nodeclk *nclk)
++{
++ int ret = 0;
++
++ if (!nclk->enable) {
++ ret = clk_prepare_enable(nclk->clk);
++
++ if (ret) {
++ MSM_BUS_ERR("%s: failed to enable clk ", __func__);
++ nclk->enable = false;
++ } else
++ nclk->enable = true;
++ }
++ return ret;
++}
++
++static int disable_nodeclk(struct nodeclk *nclk)
++{
++ int ret = 0;
++
++ if (nclk->enable) {
++ clk_disable_unprepare(nclk->clk);
++ nclk->enable = false;
++ }
++ return ret;
++}
++
++static int setrate_nodeclk(struct nodeclk *nclk, long rate)
++{
++ int ret = 0;
++
++ ret = clk_set_rate(nclk->clk, rate);
++
++ if (ret)
++ MSM_BUS_ERR("%s: failed to setrate clk", __func__);
++ return ret;
++}
++
++static int msm_bus_agg_fab_clks(struct device *bus_dev, void *data)
++{
++ struct msm_bus_node_device_type *node = NULL;
++ int ret = 0;
++ int ctx = *(int *)data;
++
++ if (ctx >= NUM_CTX) {
++ MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx);
++ goto exit_agg_fab_clks;
++ }
++
++ node = bus_dev->platform_data;
++ if (!node) {
++ MSM_BUS_ERR("%s: Can't get device info", __func__);
++ goto exit_agg_fab_clks;
++ }
++
++ if (!node->node_info->is_fab_dev) {
++ struct msm_bus_node_device_type *bus_dev = NULL;
++
++ bus_dev = node->node_info->bus_device->platform_data;
++
++ if (node->cur_clk_hz[ctx] >= bus_dev->cur_clk_hz[ctx])
++ bus_dev->cur_clk_hz[ctx] = node->cur_clk_hz[ctx];
++ }
++
++exit_agg_fab_clks:
++ return ret;
++}
++
++static int msm_bus_reset_fab_clks(struct device *bus_dev, void *data)
++{
++ struct msm_bus_node_device_type *node = NULL;
++ int ret = 0;
++ int ctx = *(int *)data;
++
++ if (ctx >= NUM_CTX) {
++ MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx);
++ goto exit_reset_fab_clks;
++ }
++
++ node = bus_dev->platform_data;
++ if (!node) {
++ MSM_BUS_ERR("%s: Can't get device info", __func__);
++ goto exit_reset_fab_clks;
++ }
++
++ if (node->node_info->is_fab_dev) {
++ node->cur_clk_hz[ctx] = 0;
++ MSM_BUS_DBG("Resetting for node %d", node->node_info->id);
++ }
++exit_reset_fab_clks:
++ return ret;
++}
++
++
++static int send_rpm_msg(struct device *device)
++{
++ int ret = 0;
++ int ctx;
++ int rsc_type;
++ struct msm_bus_node_device_type *ndev =
++ device->platform_data;
++ struct msm_rpm_kvp rpm_kvp;
++
++ if (!ndev) {
++ MSM_BUS_ERR("%s: Error getting node info.", __func__);
++ ret = -ENODEV;
++ goto exit_send_rpm_msg;
++ }
++
++ rpm_kvp.length = sizeof(uint64_t);
++ rpm_kvp.key = RPM_MASTER_FIELD_BW;
++
++ for (ctx = MSM_RPM_CTX_ACTIVE_SET; ctx <= MSM_RPM_CTX_SLEEP_SET;
++ ctx++) {
++ if (ctx == MSM_RPM_CTX_ACTIVE_SET)
++ rpm_kvp.data =
++ (uint8_t *)&ndev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET];
++ else {
++ rpm_kvp.data =
++ (uint8_t *) &ndev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET];
++ }
++
++ if (ndev->node_info->mas_rpm_id != -1) {
++ rsc_type = RPM_BUS_MASTER_REQ;
++ ret = msm_rpm_send_message(ctx, rsc_type,
++ ndev->node_info->mas_rpm_id, &rpm_kvp, 1);
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to send RPM message:",
++ __func__);
++ MSM_BUS_ERR("%s:Node Id %d RPM id %d",
++ __func__, ndev->node_info->id,
++ ndev->node_info->mas_rpm_id);
++ goto exit_send_rpm_msg;
++ }
++ }
++
++ if (ndev->node_info->slv_rpm_id != -1) {
++ rsc_type = RPM_BUS_SLAVE_REQ;
++ ret = msm_rpm_send_message(ctx, rsc_type,
++ ndev->node_info->slv_rpm_id, &rpm_kvp, 1);
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to send RPM message:",
++ __func__);
++ MSM_BUS_ERR("%s: Node Id %d RPM id %d",
++ __func__, ndev->node_info->id,
++ ndev->node_info->slv_rpm_id);
++ goto exit_send_rpm_msg;
++ }
++ }
++ }
++exit_send_rpm_msg:
++ return ret;
++}
++
++static int flush_bw_data(struct device *node_device, int ctx)
++{
++ struct msm_bus_node_device_type *node_info;
++ int ret = 0;
++
++ node_info = node_device->platform_data;
++ if (!node_info) {
++ MSM_BUS_ERR("%s: Unable to find bus device for device",
++ __func__);
++ ret = -ENODEV;
++ goto exit_flush_bw_data;
++ }
++
++ if (node_info->node_ab.dirty) {
++ if (node_info->ap_owned) {
++ struct msm_bus_node_device_type *bus_device =
++ node_info->node_info->bus_device->platform_data;
++ struct msm_bus_fab_device_type *fabdev =
++ bus_device->fabdev;
++
++ if (fabdev && fabdev->noc_ops.update_bw_reg &&
++ fabdev->noc_ops.update_bw_reg
++ (node_info->node_info->qos_params.mode))
++ ret = fabdev->noc_ops.set_bw(node_info,
++ fabdev->qos_base,
++ fabdev->base_offset,
++ fabdev->qos_off,
++ fabdev->qos_freq);
++ } else {
++ ret = send_rpm_msg(node_device);
++
++ if (ret)
++ MSM_BUS_ERR("%s: Failed to send RPM msg for%d",
++ __func__, node_info->node_info->id);
++ }
++ node_info->node_ab.dirty = false;
++ }
++
++exit_flush_bw_data:
++ return ret;
++
++}
++
++static int flush_clk_data(struct device *node_device, int ctx)
++{
++ struct msm_bus_node_device_type *node;
++ struct nodeclk *nodeclk = NULL;
++ int ret = 0;
++
++ node = node_device->platform_data;
++ if (!node) {
++ MSM_BUS_ERR("Unable to find bus device");
++ ret = -ENODEV;
++ goto exit_flush_clk_data;
++ }
++
++ nodeclk = &node->clk[ctx];
++ if (node->node_info->is_fab_dev) {
++ if (nodeclk->rate != node->cur_clk_hz[ctx]) {
++ nodeclk->rate = node->cur_clk_hz[ctx];
++ nodeclk->dirty = true;
++ }
++ }
++
++ if (nodeclk && nodeclk->clk && nodeclk->dirty) {
++ long rounded_rate;
++
++ if (nodeclk->rate) {
++ rounded_rate = clk_round_rate(nodeclk->clk,
++ nodeclk->rate);
++ ret = setrate_nodeclk(nodeclk, rounded_rate);
++
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to set_rate %lu for %d",
++ __func__, rounded_rate,
++ node->node_info->id);
++ ret = -ENODEV;
++ goto exit_flush_clk_data;
++ }
++
++ ret = enable_nodeclk(nodeclk);
++ } else
++ ret = disable_nodeclk(nodeclk);
++
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to enable for %d", __func__,
++ node->node_info->id);
++ ret = -ENODEV;
++ goto exit_flush_clk_data;
++ }
++ MSM_BUS_DBG("%s: Updated %d clk to %llu", __func__,
++ node->node_info->id, nodeclk->rate);
++
++ }
++exit_flush_clk_data:
++ /* Reset the aggregated clock rate for fab devices*/
++ if (node && node->node_info->is_fab_dev)
++ node->cur_clk_hz[ctx] = 0;
++
++ if (nodeclk)
++ nodeclk->dirty = 0;
++ return ret;
++}
++
++int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty)
++{
++ int ret = 0;
++ int i = 0;
++
++ /* Aggregate the bus clocks */
++ bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx,
++ msm_bus_agg_fab_clks);
++
++ for (i = 0; i < num_dirty; i++) {
++ struct device *node_device =
++ bus_find_device(&msm_bus_type, NULL,
++ (void *)&dirty_nodes[i],
++ msm_bus_device_match_adhoc);
++
++ if (!node_device) {
++ MSM_BUS_ERR("Can't find device for %d", dirty_nodes[i]);
++ continue;
++ }
++
++ ret = flush_bw_data(node_device, ctx);
++ if (ret)
++ MSM_BUS_ERR("%s: Error flushing bw data for node %d",
++ __func__, dirty_nodes[i]);
++
++ ret = flush_clk_data(node_device, ctx);
++ if (ret)
++ MSM_BUS_ERR("%s: Error flushing clk data for node %d",
++ __func__, dirty_nodes[i]);
++ }
++ kfree(dirty_nodes);
++ /* Aggregate the bus clocks */
++ bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx,
++ msm_bus_reset_fab_clks);
++ return ret;
++}
++
++void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size,
++ size_t new_size, gfp_t flags)
++{
++ void *ret;
++ size_t copy_size = old_size;
++
++ if (!new_size) {
++ devm_kfree(dev, p);
++ return ZERO_SIZE_PTR;
++ }
++
++ if (new_size < old_size)
++ copy_size = new_size;
++
++ ret = devm_kzalloc(dev, new_size, flags);
++ if (!ret) {
++ MSM_BUS_ERR("%s: Error Reallocating memory", __func__);
++ goto exit_realloc_devmem;
++ }
++
++ memcpy(ret, p, copy_size);
++ devm_kfree(dev, p);
++exit_realloc_devmem:
++ return ret;
++}
++
++
++static int add_dirty_node(int **dirty_nodes, int id, int *num_dirty)
++{
++ int i;
++ int found = 0;
++ int ret = 0;
++ int *dnode = NULL;
++
++ for (i = 0; i < *num_dirty; i++) {
++ if ((*dirty_nodes)[i] == id) {
++ found = 1;
++ break;
++ }
++ }
++
++ if (!found) {
++ (*num_dirty)++;
++ dnode =
++ krealloc(*dirty_nodes, sizeof(int) * (*num_dirty),
++ GFP_KERNEL);
++
++ if (ZERO_OR_NULL_PTR(dnode)) {
++ MSM_BUS_ERR("%s: Failure allocating dirty nodes array",
++ __func__);
++ ret = -ENOMEM;
++ } else {
++ *dirty_nodes = dnode;
++ (*dirty_nodes)[(*num_dirty) - 1] = id;
++ }
++ }
++
++ return ret;
++}
++
++int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx,
++ int64_t add_bw, int **dirty_nodes, int *num_dirty)
++{
++ int ret = 0;
++ int i, j;
++ uint64_t cur_ab_slp = 0;
++ uint64_t cur_ab_act = 0;
++
++ if (nodedev->node_info->virt_dev)
++ goto exit_update_bw;
++
++ for (i = 0; i < NUM_CTX; i++) {
++ for (j = 0; j < nodedev->num_lnodes; j++) {
++ if (i == DUAL_CTX) {
++ cur_ab_act +=
++ nodedev->lnode_list[j].lnode_ab[i];
++ cur_ab_slp +=
++ nodedev->lnode_list[j].lnode_ab[i];
++ } else
++ cur_ab_act +=
++ nodedev->lnode_list[j].lnode_ab[i];
++ }
++ }
++
++ if (nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] != cur_ab_act) {
++ nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] = cur_ab_act;
++ nodedev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET] = cur_ab_slp;
++ nodedev->node_ab.dirty = true;
++ ret = add_dirty_node(dirty_nodes, nodedev->node_info->id,
++ num_dirty);
++
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
++ nodedev->node_info->id);
++ goto exit_update_bw;
++ }
++ }
++
++exit_update_bw:
++ return ret;
++}
++
++int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev,
++ int ctx, int **dirty_nodes, int *num_dirty)
++{
++ int status = 0;
++ struct nodeclk *nodeclk;
++ struct nodeclk *busclk;
++ struct msm_bus_node_device_type *bus_info = NULL;
++ uint64_t req_clk;
++
++ bus_info = nodedev->node_info->bus_device->platform_data;
++
++ if (!bus_info) {
++ MSM_BUS_ERR("%s: Unable to find bus device for device %d",
++ __func__, nodedev->node_info->id);
++ status = -ENODEV;
++ goto exit_set_clks;
++ }
++
++ req_clk = nodedev->cur_clk_hz[ctx];
++ busclk = &bus_info->clk[ctx];
++
++ if (busclk->rate != req_clk) {
++ busclk->rate = req_clk;
++ busclk->dirty = 1;
++ MSM_BUS_DBG("%s: Modifying bus clk %d Rate %llu", __func__,
++ bus_info->node_info->id, req_clk);
++ status = add_dirty_node(dirty_nodes, bus_info->node_info->id,
++ num_dirty);
++
++ if (status) {
++ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
++ bus_info->node_info->id);
++ goto exit_set_clks;
++ }
++ }
++
++ req_clk = nodedev->cur_clk_hz[ctx];
++ nodeclk = &nodedev->clk[ctx];
++
++ if (IS_ERR_OR_NULL(nodeclk))
++ goto exit_set_clks;
++
++ if (!nodeclk->dirty || (nodeclk->dirty && (nodeclk->rate < req_clk))) {
++ nodeclk->rate = req_clk;
++ nodeclk->dirty = 1;
++ MSM_BUS_DBG("%s: Modifying node clk %d Rate %llu", __func__,
++ nodedev->node_info->id, req_clk);
++ status = add_dirty_node(dirty_nodes, nodedev->node_info->id,
++ num_dirty);
++ if (status) {
++ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
++ nodedev->node_info->id);
++ goto exit_set_clks;
++ }
++ }
++
++exit_set_clks:
++ return status;
++}
++
++static void msm_bus_fab_init_noc_ops(struct msm_bus_node_device_type *bus_dev)
++{
++ switch (bus_dev->fabdev->bus_type) {
++ case MSM_BUS_NOC:
++ msm_bus_noc_set_ops(bus_dev);
++ break;
++ case MSM_BUS_BIMC:
++ msm_bus_bimc_set_ops(bus_dev);
++ break;
++ default:
++ MSM_BUS_ERR("%s: Invalid Bus type", __func__);
++ }
++}
++
++static int msm_bus_qos_disable_clk(struct msm_bus_node_device_type *node,
++ int disable_bus_qos_clk)
++{
++ struct msm_bus_node_device_type *bus_node = NULL;
++ int ret = 0;
++
++ if (!node) {
++ ret = -ENXIO;
++ goto exit_disable_qos_clk;
++ }
++
++ bus_node = node->node_info->bus_device->platform_data;
++
++ if (!bus_node) {
++ ret = -ENXIO;
++ goto exit_disable_qos_clk;
++ }
++
++ if (disable_bus_qos_clk)
++ ret = disable_nodeclk(&bus_node->clk[DUAL_CTX]);
++
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to disable bus clk, node %d",
++ __func__, node->node_info->id);
++ goto exit_disable_qos_clk;
++ }
++
++ if (!IS_ERR_OR_NULL(node->qos_clk.clk)) {
++ ret = disable_nodeclk(&node->qos_clk);
++
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to disable mas qos clk,node %d",
++ __func__, node->node_info->id);
++ goto exit_disable_qos_clk;
++ }
++ }
++
++exit_disable_qos_clk:
++ return ret;
++}
++
++static int msm_bus_qos_enable_clk(struct msm_bus_node_device_type *node)
++{
++ struct msm_bus_node_device_type *bus_node = NULL;
++ long rounded_rate;
++ int ret = 0;
++ int bus_qos_enabled = 0;
++
++ if (!node) {
++ ret = -ENXIO;
++ goto exit_enable_qos_clk;
++ }
++
++ bus_node = node->node_info->bus_device->platform_data;
++
++ if (!bus_node) {
++ ret = -ENXIO;
++ goto exit_enable_qos_clk;
++ }
++
++ /* Check if the bus clk is already set before trying to set it
++ * Do this only during
++ * a. Bootup
++ * b. Only for bus clks
++ **/
++ if (!clk_get_rate(bus_node->clk[DUAL_CTX].clk)) {
++ rounded_rate = clk_round_rate(bus_node->clk[DUAL_CTX].clk, 1);
++ ret = setrate_nodeclk(&bus_node->clk[DUAL_CTX], rounded_rate);
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to set bus clk, node %d",
++ __func__, node->node_info->id);
++ goto exit_enable_qos_clk;
++ }
++
++ ret = enable_nodeclk(&bus_node->clk[DUAL_CTX]);
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to enable bus clk, node %d",
++ __func__, node->node_info->id);
++ goto exit_enable_qos_clk;
++ }
++ bus_qos_enabled = 1;
++ }
++
++ if (!IS_ERR_OR_NULL(node->qos_clk.clk)) {
++ rounded_rate = clk_round_rate(node->qos_clk.clk, 1);
++ ret = setrate_nodeclk(&node->qos_clk, rounded_rate);
++ if (ret) {
++ MSM_BUS_ERR("%s: Failed to enable mas qos clk, node %d",
++ __func__, node->node_info->id);
++ goto exit_enable_qos_clk;
++ }
++
++ ret = enable_nodeclk(&node->qos_clk);
++ if (ret) {
++ MSM_BUS_ERR("Err enable mas qos clk, node %d ret %d",
++ node->node_info->id, ret);
++ goto exit_enable_qos_clk;
++ }
++ }
++ ret = bus_qos_enabled;
++
++exit_enable_qos_clk:
++ return ret;
++}
++
++int msm_bus_enable_limiter(struct msm_bus_node_device_type *node_dev,
++ bool enable, uint64_t lim_bw)
++{
++ int ret = 0;
++ struct msm_bus_node_device_type *bus_node_dev;
++
++ if (!node_dev) {
++ MSM_BUS_ERR("No device specified");
++ ret = -ENXIO;
++ goto exit_enable_limiter;
++ }
++
++ if (!node_dev->ap_owned) {
++ MSM_BUS_ERR("Device is not AP owned %d.",
++ node_dev->node_info->id);
++ ret = -ENXIO;
++ goto exit_enable_limiter;
++ }
++
++ bus_node_dev = node_dev->node_info->bus_device->platform_data;
++ if (!bus_node_dev) {
++ MSM_BUS_ERR("Unable to get bus device infofor %d",
++ node_dev->node_info->id);
++ ret = -ENXIO;
++ goto exit_enable_limiter;
++ }
++ if (bus_node_dev->fabdev &&
++ bus_node_dev->fabdev->noc_ops.limit_mport) {
++ ret = msm_bus_qos_enable_clk(node_dev);
++ if (ret < 0) {
++ MSM_BUS_ERR("Can't Enable QoS clk %d",
++ node_dev->node_info->id);
++ goto exit_enable_limiter;
++ }
++ bus_node_dev->fabdev->noc_ops.limit_mport(
++ node_dev,
++ bus_node_dev->fabdev->qos_base,
++ bus_node_dev->fabdev->base_offset,
++ bus_node_dev->fabdev->qos_off,
++ bus_node_dev->fabdev->qos_freq,
++ enable, lim_bw);
++ msm_bus_qos_disable_clk(node_dev, ret);
++ }
++
++exit_enable_limiter:
++ return ret;
++}
++
++static int msm_bus_dev_init_qos(struct device *dev, void *data)
++{
++ int ret = 0;
++ struct msm_bus_node_device_type *node_dev = NULL;
++
++ node_dev = dev->platform_data;
++
++ if (!node_dev) {
++ MSM_BUS_ERR("%s: Unable to get node device info" , __func__);
++ ret = -ENXIO;
++ goto exit_init_qos;
++ }
++
++ MSM_BUS_DBG("Device = %d", node_dev->node_info->id);
++
++ if (node_dev->ap_owned) {
++ struct msm_bus_node_device_type *bus_node_info;
++
++ bus_node_info = node_dev->node_info->bus_device->platform_data;
++
++ if (!bus_node_info) {
++ MSM_BUS_ERR("%s: Unable to get bus device infofor %d",
++ __func__,
++ node_dev->node_info->id);
++ ret = -ENXIO;
++ goto exit_init_qos;
++ }
++
++ if (bus_node_info->fabdev &&
++ bus_node_info->fabdev->noc_ops.qos_init) {
++ int ret = 0;
++
++ if (node_dev->ap_owned &&
++ (node_dev->node_info->qos_params.mode) != -1) {
++
++ if (bus_node_info->fabdev->bypass_qos_prg)
++ goto exit_init_qos;
++
++ ret = msm_bus_qos_enable_clk(node_dev);
++ if (ret < 0) {
++ MSM_BUS_ERR("Can't Enable QoS clk %d",
++ node_dev->node_info->id);
++ goto exit_init_qos;
++ }
++
++ bus_node_info->fabdev->noc_ops.qos_init(
++ node_dev,
++ bus_node_info->fabdev->qos_base,
++ bus_node_info->fabdev->base_offset,
++ bus_node_info->fabdev->qos_off,
++ bus_node_info->fabdev->qos_freq);
++ msm_bus_qos_disable_clk(node_dev, ret);
++ }
++ } else
++ MSM_BUS_ERR("%s: Skipping QOS init for %d",
++ __func__, node_dev->node_info->id);
++ }
++exit_init_qos:
++ return ret;
++}
++
++static int msm_bus_fabric_init(struct device *dev,
++ struct msm_bus_node_device_type *pdata)
++{
++ struct msm_bus_fab_device_type *fabdev;
++ struct msm_bus_node_device_type *node_dev = NULL;
++ int ret = 0;
++
++ node_dev = dev->platform_data;
++ if (!node_dev) {
++ MSM_BUS_ERR("%s: Unable to get bus device info" , __func__);
++ ret = -ENXIO;
++ goto exit_fabric_init;
++ }
++
++ if (node_dev->node_info->virt_dev) {
++ MSM_BUS_ERR("%s: Skip Fab init for virtual device %d", __func__,
++ node_dev->node_info->id);
++ goto exit_fabric_init;
++ }
++
++ fabdev = devm_kzalloc(dev, sizeof(struct msm_bus_fab_device_type),
++ GFP_KERNEL);
++ if (!fabdev) {
++ MSM_BUS_ERR("Fabric alloc failed\n");
++ ret = -ENOMEM;
++ goto exit_fabric_init;
++ }
++
++ node_dev->fabdev = fabdev;
++ fabdev->pqos_base = pdata->fabdev->pqos_base;
++ fabdev->qos_range = pdata->fabdev->qos_range;
++ fabdev->base_offset = pdata->fabdev->base_offset;
++ fabdev->qos_off = pdata->fabdev->qos_off;
++ fabdev->qos_freq = pdata->fabdev->qos_freq;
++ fabdev->bus_type = pdata->fabdev->bus_type;
++ fabdev->bypass_qos_prg = pdata->fabdev->bypass_qos_prg;
++ fabdev->util_fact = pdata->fabdev->util_fact;
++ fabdev->vrail_comp = pdata->fabdev->vrail_comp;
++ msm_bus_fab_init_noc_ops(node_dev);
++
++ fabdev->qos_base = devm_ioremap(dev,
++ fabdev->pqos_base, fabdev->qos_range);
++ if (!fabdev->qos_base) {
++ MSM_BUS_ERR("%s: Error remapping address 0x%zx :bus device %d",
++ __func__,
++ (size_t)fabdev->pqos_base, node_dev->node_info->id);
++ ret = -ENOMEM;
++ goto exit_fabric_init;
++ }
++
++ /*if (msmbus_coresight_init(pdev))
++ pr_warn("Coresight support absent for bus: %d\n", pdata->id);*/
++exit_fabric_init:
++ return ret;
++}
++
++static int msm_bus_init_clk(struct device *bus_dev,
++ struct msm_bus_node_device_type *pdata)
++{
++ unsigned int ctx;
++ int ret = 0;
++ struct msm_bus_node_device_type *node_dev = bus_dev->platform_data;
++
++ for (ctx = 0; ctx < NUM_CTX; ctx++) {
++ if (!IS_ERR_OR_NULL(pdata->clk[ctx].clk)) {
++ node_dev->clk[ctx].clk = pdata->clk[ctx].clk;
++ node_dev->clk[ctx].enable = false;
++ node_dev->clk[ctx].dirty = false;
++ MSM_BUS_ERR("%s: Valid node clk node %d ctx %d",
++ __func__, node_dev->node_info->id, ctx);
++ }
++ }
++
++ if (!IS_ERR_OR_NULL(pdata->qos_clk.clk)) {
++ node_dev->qos_clk.clk = pdata->qos_clk.clk;
++ node_dev->qos_clk.enable = false;
++ MSM_BUS_ERR("%s: Valid Iface clk node %d", __func__,
++ node_dev->node_info->id);
++ }
++
++ return ret;
++}
++
++static int msm_bus_copy_node_info(struct msm_bus_node_device_type *pdata,
++ struct device *bus_dev)
++{
++ int ret = 0;
++ struct msm_bus_node_info_type *node_info = NULL;
++ struct msm_bus_node_info_type *pdata_node_info = NULL;
++ struct msm_bus_node_device_type *bus_node = NULL;
++
++ bus_node = bus_dev->platform_data;
++
++ if (!bus_node || !pdata) {
++ ret = -ENXIO;
++ MSM_BUS_ERR("%s: Invalid pointers pdata %p, bus_node %p",
++ __func__, pdata, bus_node);
++ goto exit_copy_node_info;
++ }
++
++ node_info = bus_node->node_info;
++ pdata_node_info = pdata->node_info;
++
++ node_info->name = pdata_node_info->name;
++ node_info->id = pdata_node_info->id;
++ node_info->bus_device_id = pdata_node_info->bus_device_id;
++ node_info->mas_rpm_id = pdata_node_info->mas_rpm_id;
++ node_info->slv_rpm_id = pdata_node_info->slv_rpm_id;
++ node_info->num_connections = pdata_node_info->num_connections;
++ node_info->num_blist = pdata_node_info->num_blist;
++ node_info->num_qports = pdata_node_info->num_qports;
++ node_info->buswidth = pdata_node_info->buswidth;
++ node_info->virt_dev = pdata_node_info->virt_dev;
++ node_info->is_fab_dev = pdata_node_info->is_fab_dev;
++ node_info->qos_params.mode = pdata_node_info->qos_params.mode;
++ node_info->qos_params.prio1 = pdata_node_info->qos_params.prio1;
++ node_info->qos_params.prio0 = pdata_node_info->qos_params.prio0;
++ node_info->qos_params.prio_lvl = pdata_node_info->qos_params.prio_lvl;
++ node_info->qos_params.prio_rd = pdata_node_info->qos_params.prio_rd;
++ node_info->qos_params.prio_wr = pdata_node_info->qos_params.prio_wr;
++ node_info->qos_params.gp = pdata_node_info->qos_params.gp;
++ node_info->qos_params.thmp = pdata_node_info->qos_params.thmp;
++ node_info->qos_params.ws = pdata_node_info->qos_params.ws;
++ node_info->qos_params.bw_buffer = pdata_node_info->qos_params.bw_buffer;
++ node_info->util_fact = pdata_node_info->util_fact;
++ node_info->vrail_comp = pdata_node_info->vrail_comp;
++
++ node_info->dev_connections = devm_kzalloc(bus_dev,
++ sizeof(struct device *) *
++ pdata_node_info->num_connections,
++ GFP_KERNEL);
++ if (!node_info->dev_connections) {
++ MSM_BUS_ERR("%s:Bus dev connections alloc failed\n", __func__);
++ ret = -ENOMEM;
++ goto exit_copy_node_info;
++ }
++
++ node_info->connections = devm_kzalloc(bus_dev,
++ sizeof(int) * pdata_node_info->num_connections,
++ GFP_KERNEL);
++ if (!node_info->connections) {
++ MSM_BUS_ERR("%s:Bus connections alloc failed\n", __func__);
++ devm_kfree(bus_dev, node_info->dev_connections);
++ ret = -ENOMEM;
++ goto exit_copy_node_info;
++ }
++
++ memcpy(node_info->connections,
++ pdata_node_info->connections,
++ sizeof(int) * pdata_node_info->num_connections);
++
++ node_info->black_connections = devm_kzalloc(bus_dev,
++ sizeof(struct device *) *
++ pdata_node_info->num_blist,
++ GFP_KERNEL);
++ if (!node_info->black_connections) {
++ MSM_BUS_ERR("%s: Bus black connections alloc failed\n",
++ __func__);
++ devm_kfree(bus_dev, node_info->dev_connections);
++ devm_kfree(bus_dev, node_info->connections);
++ ret = -ENOMEM;
++ goto exit_copy_node_info;
++ }
++
++ node_info->black_listed_connections = devm_kzalloc(bus_dev,
++ pdata_node_info->num_blist * sizeof(int),
++ GFP_KERNEL);
++ if (!node_info->black_listed_connections) {
++ MSM_BUS_ERR("%s:Bus black list connections alloc failed\n",
++ __func__);
++ devm_kfree(bus_dev, node_info->black_connections);
++ devm_kfree(bus_dev, node_info->dev_connections);
++ devm_kfree(bus_dev, node_info->connections);
++ ret = -ENOMEM;
++ goto exit_copy_node_info;
++ }
++
++ memcpy(node_info->black_listed_connections,
++ pdata_node_info->black_listed_connections,
++ sizeof(int) * pdata_node_info->num_blist);
++
++ node_info->qport = devm_kzalloc(bus_dev,
++ sizeof(int) * pdata_node_info->num_qports,
++ GFP_KERNEL);
++ if (!node_info->qport) {
++ MSM_BUS_ERR("%s:Bus qport allocation failed\n", __func__);
++ devm_kfree(bus_dev, node_info->dev_connections);
++ devm_kfree(bus_dev, node_info->connections);
++ devm_kfree(bus_dev, node_info->black_listed_connections);
++ ret = -ENOMEM;
++ goto exit_copy_node_info;
++ }
++
++ memcpy(node_info->qport,
++ pdata_node_info->qport,
++ sizeof(int) * pdata_node_info->num_qports);
++
++exit_copy_node_info:
++ return ret;
++}
++
++static struct device *msm_bus_device_init(
++ struct msm_bus_node_device_type *pdata)
++{
++ struct device *bus_dev = NULL;
++ struct msm_bus_node_device_type *bus_node = NULL;
++ struct msm_bus_node_info_type *node_info = NULL;
++ int ret = 0;
++
++ bus_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
++ if (!bus_dev) {
++ MSM_BUS_ERR("%s:Device alloc failed\n", __func__);
++ bus_dev = NULL;
++ goto exit_device_init;
++ }
++ /**
++ * Init here so we can use devm calls
++ */
++ device_initialize(bus_dev);
++
++ bus_node = devm_kzalloc(bus_dev,
++ sizeof(struct msm_bus_node_device_type), GFP_KERNEL);
++ if (!bus_node) {
++ MSM_BUS_ERR("%s:Bus node alloc failed\n", __func__);
++ kfree(bus_dev);
++ bus_dev = NULL;
++ goto exit_device_init;
++ }
++
++ node_info = devm_kzalloc(bus_dev,
++ sizeof(struct msm_bus_node_info_type), GFP_KERNEL);
++ if (!node_info) {
++ MSM_BUS_ERR("%s:Bus node info alloc failed\n", __func__);
++ devm_kfree(bus_dev, bus_node);
++ kfree(bus_dev);
++ bus_dev = NULL;
++ goto exit_device_init;
++ }
++
++ bus_node->node_info = node_info;
++ bus_node->ap_owned = pdata->ap_owned;
++ bus_dev->platform_data = bus_node;
++
++ if (msm_bus_copy_node_info(pdata, bus_dev) < 0) {
++ devm_kfree(bus_dev, bus_node);
++ devm_kfree(bus_dev, node_info);
++ kfree(bus_dev);
++ bus_dev = NULL;
++ goto exit_device_init;
++ }
++
++ bus_dev->bus = &msm_bus_type;
++ dev_set_name(bus_dev, bus_node->node_info->name);
++
++ ret = device_add(bus_dev);
++ if (ret < 0) {
++ MSM_BUS_ERR("%s: Error registering device %d",
++ __func__, pdata->node_info->id);
++ devm_kfree(bus_dev, bus_node);
++ devm_kfree(bus_dev, node_info->dev_connections);
++ devm_kfree(bus_dev, node_info->connections);
++ devm_kfree(bus_dev, node_info->black_connections);
++ devm_kfree(bus_dev, node_info->black_listed_connections);
++ devm_kfree(bus_dev, node_info);
++ kfree(bus_dev);
++ bus_dev = NULL;
++ goto exit_device_init;
++ }
++ device_create_file(bus_dev, &dev_attr_vrail);
++
++exit_device_init:
++ return bus_dev;
++}
++
++static int msm_bus_setup_dev_conn(struct device *bus_dev, void *data)
++{
++ struct msm_bus_node_device_type *bus_node = NULL;
++ int ret = 0;
++ int j;
++
++ bus_node = bus_dev->platform_data;
++ if (!bus_node) {
++ MSM_BUS_ERR("%s: Can't get device info", __func__);
++ ret = -ENODEV;
++ goto exit_setup_dev_conn;
++ }
++
++ /* Setup parent bus device for this node */
++ if (!bus_node->node_info->is_fab_dev) {
++ struct device *bus_parent_device =
++ bus_find_device(&msm_bus_type, NULL,
++ (void *)&bus_node->node_info->bus_device_id,
++ msm_bus_device_match_adhoc);
++
++ if (!bus_parent_device) {
++ MSM_BUS_ERR("%s: Error finding parentdev %d parent %d",
++ __func__,
++ bus_node->node_info->id,
++ bus_node->node_info->bus_device_id);
++ ret = -ENXIO;
++ goto exit_setup_dev_conn;
++ }
++ bus_node->node_info->bus_device = bus_parent_device;
++ }
++
++ bus_node->node_info->is_traversed = false;
++
++ for (j = 0; j < bus_node->node_info->num_connections; j++) {
++ bus_node->node_info->dev_connections[j] =
++ bus_find_device(&msm_bus_type, NULL,
++ (void *)&bus_node->node_info->connections[j],
++ msm_bus_device_match_adhoc);
++
++ if (!bus_node->node_info->dev_connections[j]) {
++ MSM_BUS_ERR("%s: Error finding conn %d for device %d",
++ __func__, bus_node->node_info->connections[j],
++ bus_node->node_info->id);
++ ret = -ENODEV;
++ goto exit_setup_dev_conn;
++ }
++ }
++
++ for (j = 0; j < bus_node->node_info->num_blist; j++) {
++ bus_node->node_info->black_connections[j] =
++ bus_find_device(&msm_bus_type, NULL,
++ (void *)&bus_node->node_info->
++ black_listed_connections[j],
++ msm_bus_device_match_adhoc);
++
++ if (!bus_node->node_info->black_connections[j]) {
++ MSM_BUS_ERR("%s: Error finding conn %d for device %d\n",
++ __func__, bus_node->node_info->
++ black_listed_connections[j],
++ bus_node->node_info->id);
++ ret = -ENODEV;
++ goto exit_setup_dev_conn;
++ }
++ }
++
++exit_setup_dev_conn:
++ return ret;
++}
++
++static int msm_bus_node_debug(struct device *bus_dev, void *data)
++{
++ int j;
++ int ret = 0;
++ struct msm_bus_node_device_type *bus_node = NULL;
++
++ bus_node = bus_dev->platform_data;
++ if (!bus_node) {
++ MSM_BUS_ERR("%s: Can't get device info", __func__);
++ ret = -ENODEV;
++ goto exit_node_debug;
++ }
++
++ MSM_BUS_DBG("Device = %d buswidth %u", bus_node->node_info->id,
++ bus_node->node_info->buswidth);
++ for (j = 0; j < bus_node->node_info->num_connections; j++) {
++ struct msm_bus_node_device_type *bdev =
++ (struct msm_bus_node_device_type *)
++ bus_node->node_info->dev_connections[j]->platform_data;
++ MSM_BUS_DBG("\n\t Connection[%d] %d", j, bdev->node_info->id);
++ }
++
++exit_node_debug:
++ return ret;
++}
++
++static int msm_bus_device_probe(struct platform_device *pdev)
++{
++ unsigned int i, ret;
++ struct msm_bus_device_node_registration *pdata;
++
++ /* If possible, get pdata from device-tree */
++ if (pdev->dev.of_node)
++ pdata = msm_bus_of_to_pdata(pdev);
++ else {
++ pdata = (struct msm_bus_device_node_registration *)pdev->
++ dev.platform_data;
++ }
++
++ if (IS_ERR_OR_NULL(pdata)) {
++ MSM_BUS_ERR("No platform data found");
++ ret = -ENODATA;
++ goto exit_device_probe;
++ }
++
++ for (i = 0; i < pdata->num_devices; i++) {
++ struct device *node_dev = NULL;
++
++ node_dev = msm_bus_device_init(&pdata->info[i]);
++
++ if (!node_dev) {
++ MSM_BUS_ERR("%s: Error during dev init for %d",
++ __func__, pdata->info[i].node_info->id);
++ ret = -ENXIO;
++ goto exit_device_probe;
++ }
++
++ ret = msm_bus_init_clk(node_dev, &pdata->info[i]);
++ /*Is this a fabric device ?*/
++ if (pdata->info[i].node_info->is_fab_dev) {
++ MSM_BUS_DBG("%s: %d is a fab", __func__,
++ pdata->info[i].node_info->id);
++ ret = msm_bus_fabric_init(node_dev, &pdata->info[i]);
++ if (ret) {
++ MSM_BUS_ERR("%s: Error intializing fab %d",
++ __func__, pdata->info[i].node_info->id);
++ goto exit_device_probe;
++ }
++ }
++ }
++
++ ret = bus_for_each_dev(&msm_bus_type, NULL, NULL,
++ msm_bus_setup_dev_conn);
++ if (ret) {
++ MSM_BUS_ERR("%s: Error setting up dev connections", __func__);
++ goto exit_device_probe;
++ }
++
++ ret = bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_dev_init_qos);
++ if (ret) {
++ MSM_BUS_ERR("%s: Error during qos init", __func__);
++ goto exit_device_probe;
++ }
++
++ bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_node_debug);
++
++ /* Register the arb layer ops */
++ msm_bus_arb_setops_adhoc(&arb_ops);
++ devm_kfree(&pdev->dev, pdata->info);
++ devm_kfree(&pdev->dev, pdata);
++exit_device_probe:
++ return ret;
++}
++
++static int msm_bus_device_rules_probe(struct platform_device *pdev)
++{
++ struct bus_rule_type *rule_data = NULL;
++ int num_rules = 0;
++
++ num_rules = msm_bus_of_get_static_rules(pdev, &rule_data);
++
++ if (!rule_data)
++ goto exit_rules_probe;
++
++ msm_rule_register(num_rules, rule_data, NULL);
++ static_rules.num_rules = num_rules;
++ static_rules.rules = rule_data;
++ pdev->dev.platform_data = &static_rules;
++
++exit_rules_probe:
++ return 0;
++}
++
++int msm_bus_device_rules_remove(struct platform_device *pdev)
++{
++ struct static_rules_type *static_rules = NULL;
++
++ static_rules = pdev->dev.platform_data;
++ if (static_rules)
++ msm_rule_unregister(static_rules->num_rules,
++ static_rules->rules, NULL);
++ return 0;
++}
++
++static int msm_bus_free_dev(struct device *dev, void *data)
++{
++ struct msm_bus_node_device_type *bus_node = NULL;
++
++ bus_node = dev->platform_data;
++
++ if (bus_node)
++ MSM_BUS_ERR("\n%s: Removing device %d", __func__,
++ bus_node->node_info->id);
++ device_unregister(dev);
++ return 0;
++}
++
++int msm_bus_device_remove(struct platform_device *pdev)
++{
++ bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_free_dev);
++ return 0;
++}
++
++static struct of_device_id rules_match[] = {
++ {.compatible = "qcom,msm-bus-static-bw-rules"},
++ {}
++};
++
++static struct platform_driver msm_bus_rules_driver = {
++ .probe = msm_bus_device_rules_probe,
++ .remove = msm_bus_device_rules_remove,
++ .driver = {
++ .name = "msm_bus_rules_device",
++ .owner = THIS_MODULE,
++ .of_match_table = rules_match,
++ },
++};
++
++static struct of_device_id fabric_match[] = {
++ {.compatible = "qcom,msm-bus-device"},
++ {}
++};
++
++static struct platform_driver msm_bus_device_driver = {
++ .probe = msm_bus_device_probe,
++ .remove = msm_bus_device_remove,
++ .driver = {
++ .name = "msm_bus_device",
++ .owner = THIS_MODULE,
++ .of_match_table = fabric_match,
++ },
++};
++
++int __init msm_bus_device_init_driver(void)
++{
++ int rc;
++
++ MSM_BUS_ERR("msm_bus_fabric_init_driver\n");
++ rc = platform_driver_register(&msm_bus_device_driver);
++
++ if (rc) {
++ MSM_BUS_ERR("Failed to register bus device driver");
++ return rc;
++ }
++ return platform_driver_register(&msm_bus_rules_driver);
++}
++subsys_initcall(msm_bus_device_init_driver);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_id.c
+@@ -0,0 +1,94 @@
++/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include "msm-bus.h"
++#include "msm-bus-board.h"
++#include "msm_bus_core.h"
++#include "msm_bus_noc.h"
++#include "msm_bus_bimc.h"
++
++static uint32_t master_iids[MSM_BUS_MASTER_LAST];
++static uint32_t slave_iids[MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY];
++
++static void msm_bus_assign_iids(struct msm_bus_fabric_registration
++ *fabreg, int fabid)
++{
++ int i;
++ for (i = 0; i < fabreg->len; i++) {
++ if (!fabreg->info[i].gateway) {
++ fabreg->info[i].priv_id = fabid + fabreg->info[i].id;
++ if (fabreg->info[i].id < SLAVE_ID_KEY) {
++ if (fabreg->info[i].id >= MSM_BUS_MASTER_LAST) {
++ WARN(1, "id %d exceeds array size!\n",
++ fabreg->info[i].id);
++ continue;
++ }
++
++ master_iids[fabreg->info[i].id] =
++ fabreg->info[i].priv_id;
++ } else {
++ if ((fabreg->info[i].id - SLAVE_ID_KEY) >=
++ (MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY)) {
++ WARN(1, "id %d exceeds array size!\n",
++ fabreg->info[i].id);
++ continue;
++ }
++
++ slave_iids[fabreg->info[i].id - (SLAVE_ID_KEY)]
++ = fabreg->info[i].priv_id;
++ }
++ } else {
++ fabreg->info[i].priv_id = fabreg->info[i].id;
++ }
++ }
++}
++
++static int msm_bus_get_iid(int id)
++{
++ if ((id < SLAVE_ID_KEY && id >= MSM_BUS_MASTER_LAST) ||
++ id >= MSM_BUS_SLAVE_LAST) {
++ MSM_BUS_ERR("Cannot get iid. Invalid id %d passed\n", id);
++ return -EINVAL;
++ }
++
++ return CHECK_ID(((id < SLAVE_ID_KEY) ? master_iids[id] :
++ slave_iids[id - SLAVE_ID_KEY]), id);
++}
++
++static struct msm_bus_board_algorithm msm_bus_id_algo = {
++ .get_iid = msm_bus_get_iid,
++ .assign_iids = msm_bus_assign_iids,
++};
++
++int msm_bus_board_rpm_get_il_ids(uint16_t *id)
++{
++ return -ENXIO;
++}
++
++void msm_bus_board_init(struct msm_bus_fabric_registration *pdata)
++{
++ pdata->board_algo = &msm_bus_id_algo;
++}
++
++void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata,
++ int nfab)
++{
++ if (nfab <= 0)
++ return;
++
++ msm_bus_id_algo.board_nfab = nfab;
++}
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_noc.c
+@@ -0,0 +1,770 @@
++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: NOC: %s(): " fmt, __func__
++
++#include <linux/slab.h>
++#include <linux/io.h>
++#include "msm-bus-board.h"
++#include "msm_bus_core.h"
++#include "msm_bus_noc.h"
++#include "msm_bus_adhoc.h"
++
++/* NOC_QOS generic */
++#define __CLZ(x) ((8 * sizeof(uint32_t)) - 1 - __fls(x))
++#define SAT_SCALE 16 /* 16 bytes minimum for saturation */
++#define BW_SCALE 256 /* 1/256 byte per cycle unit */
++#define QOS_DEFAULT_BASEOFFSET 0x00003000
++#define QOS_DEFAULT_DELTA 0x80
++#define MAX_BW_FIELD (NOC_QOS_BWn_BW_BMSK >> NOC_QOS_BWn_BW_SHFT)
++#define MAX_SAT_FIELD (NOC_QOS_SATn_SAT_BMSK >> NOC_QOS_SATn_SAT_SHFT)
++
++#define NOC_QOS_REG_BASE(b, o) ((b) + (o))
++
++#define NOC_QOS_ID_COREIDn_ADDR(b, o, n, d) \
++ (NOC_QOS_REG_BASE(b, o) + (d) * (n))
++enum noc_qos_id_coreidn {
++ NOC_QOS_ID_COREIDn_RMSK = 0xffffffff,
++ NOC_QOS_ID_COREIDn_MAXn = 32,
++ NOC_QOS_ID_COREIDn_CORECHSUM_BMSK = 0xffffff00,
++ NOC_QOS_ID_COREIDn_CORECHSUM_SHFT = 0x8,
++ NOC_QOS_ID_COREIDn_CORETYPEID_BMSK = 0xff,
++ NOC_QOS_ID_COREIDn_CORETYPEID_SHFT = 0x0,
++};
++
++#define NOC_QOS_ID_REVISIONIDn_ADDR(b, o, n, d) \
++ (NOC_QOS_REG_BASE(b, o) + 0x4 + (d) * (n))
++enum noc_qos_id_revisionidn {
++ NOC_QOS_ID_REVISIONIDn_RMSK = 0xffffffff,
++ NOC_QOS_ID_REVISIONIDn_MAXn = 32,
++ NOC_QOS_ID_REVISIONIDn_FLEXNOCID_BMSK = 0xffffff00,
++ NOC_QOS_ID_REVISIONIDn_FLEXNOCID_SHFT = 0x8,
++ NOC_QOS_ID_REVISIONIDn_USERID_BMSK = 0xff,
++ NOC_QOS_ID_REVISIONIDn_USERID_SHFT = 0x0,
++};
++
++#define NOC_QOS_PRIORITYn_ADDR(b, o, n, d) \
++ (NOC_QOS_REG_BASE(b, o) + 0x8 + (d) * (n))
++enum noc_qos_id_priorityn {
++ NOC_QOS_PRIORITYn_RMSK = 0x0000000f,
++ NOC_QOS_PRIORITYn_MAXn = 32,
++ NOC_QOS_PRIORITYn_P1_BMSK = 0xc,
++ NOC_QOS_PRIORITYn_P1_SHFT = 0x2,
++ NOC_QOS_PRIORITYn_P0_BMSK = 0x3,
++ NOC_QOS_PRIORITYn_P0_SHFT = 0x0,
++};
++
++#define NOC_QOS_MODEn_ADDR(b, o, n, d) \
++ (NOC_QOS_REG_BASE(b, o) + 0xC + (d) * (n))
++enum noc_qos_id_moden_rmsk {
++ NOC_QOS_MODEn_RMSK = 0x00000003,
++ NOC_QOS_MODEn_MAXn = 32,
++ NOC_QOS_MODEn_MODE_BMSK = 0x3,
++ NOC_QOS_MODEn_MODE_SHFT = 0x0,
++};
++
++#define NOC_QOS_BWn_ADDR(b, o, n, d) \
++ (NOC_QOS_REG_BASE(b, o) + 0x10 + (d) * (n))
++enum noc_qos_id_bwn {
++ NOC_QOS_BWn_RMSK = 0x0000ffff,
++ NOC_QOS_BWn_MAXn = 32,
++ NOC_QOS_BWn_BW_BMSK = 0xffff,
++ NOC_QOS_BWn_BW_SHFT = 0x0,
++};
++
++/* QOS Saturation registers */
++#define NOC_QOS_SATn_ADDR(b, o, n, d) \
++ (NOC_QOS_REG_BASE(b, o) + 0x14 + (d) * (n))
++enum noc_qos_id_saturationn {
++ NOC_QOS_SATn_RMSK = 0x000003ff,
++ NOC_QOS_SATn_MAXn = 32,
++ NOC_QOS_SATn_SAT_BMSK = 0x3ff,
++ NOC_QOS_SATn_SAT_SHFT = 0x0,
++};
++
++static int noc_div(uint64_t *a, uint32_t b)
++{
++ if ((*a > 0) && (*a < b))
++ return 1;
++ else
++ return do_div(*a, b);
++}
++
++/**
++ * Calculates bw hardware is using from register values
++ * bw returned is in bytes/sec
++ */
++static uint64_t noc_bw(uint32_t bw_field, uint32_t qos_freq)
++{
++ uint64_t res;
++ uint32_t rem, scale;
++
++ res = 2 * qos_freq * bw_field;
++ scale = BW_SCALE * 1000;
++ rem = noc_div(&res, scale);
++ MSM_BUS_DBG("NOC: Calculated bw: %llu\n", res * 1000000ULL);
++ return res * 1000000ULL;
++}
++
++static uint32_t noc_bw_ceil(long int bw_field, uint32_t qos_freq)
++{
++ uint64_t bw_temp = 2 * qos_freq * bw_field;
++ uint32_t scale = 1000 * BW_SCALE;
++ noc_div(&bw_temp, scale);
++ return bw_temp * 1000000;
++}
++#define MAX_BW(timebase) noc_bw_ceil(MAX_BW_FIELD, (timebase))
++
++/**
++ * Calculates ws hardware is using from register values
++ * ws returned is in nanoseconds
++ */
++static uint32_t noc_ws(uint64_t bw, uint32_t sat, uint32_t qos_freq)
++{
++ if (bw && qos_freq) {
++ uint32_t bwf = bw * qos_freq;
++ uint64_t scale = 1000000000000LL * BW_SCALE *
++ SAT_SCALE * sat;
++ noc_div(&scale, bwf);
++ MSM_BUS_DBG("NOC: Calculated ws: %llu\n", scale);
++ return scale;
++ }
++
++ return 0;
++}
++#define MAX_WS(bw, timebase) noc_ws((bw), MAX_SAT_FIELD, (timebase))
++
++/* Calculate bandwidth field value for requested bandwidth */
++static uint32_t noc_bw_field(uint64_t bw, uint32_t qos_freq)
++{
++ uint32_t bw_field = 0;
++
++ if (bw) {
++ uint32_t rem;
++ uint64_t bw_capped = min_t(uint64_t, bw, MAX_BW(qos_freq));
++ uint64_t bwc = bw_capped * BW_SCALE;
++ uint64_t qf = 2 * qos_freq * 1000;
++
++ rem = noc_div(&bwc, qf);
++ bw_field = (uint32_t)min_t(uint64_t, bwc, MAX_BW_FIELD);
++ }
++
++ MSM_BUS_DBG("NOC: bw_field: %u\n", bw_field);
++ return bw_field;
++}
++
++static uint32_t noc_sat_field(uint64_t bw, uint32_t ws, uint32_t qos_freq)
++{
++ uint32_t sat_field = 0, win;
++
++ if (bw) {
++ /* Limit to max bw and scale bw to 100 KB increments */
++ uint64_t tbw, tscale;
++ uint64_t bw_scaled = min_t(uint64_t, bw, MAX_BW(qos_freq));
++ uint32_t rem = noc_div(&bw_scaled, 100000);
++
++ /**
++ * Calculate saturation from windows size.
++ * WS must be at least one arb period.
++ * Saturation must not exceed max field size
++ *
++ * Bandwidth is in 100KB increments
++ * Window size is in ns
++ * qos_freq is in KHz
++ */
++ win = max(ws, 1000000 / qos_freq);
++ tbw = bw_scaled * win * qos_freq;
++ tscale = 10000000ULL * BW_SCALE * SAT_SCALE;
++ rem = noc_div(&tbw, tscale);
++ sat_field = (uint32_t)min_t(uint64_t, tbw, MAX_SAT_FIELD);
++ }
++
++ MSM_BUS_DBG("NOC: sat_field: %d\n", sat_field);
++ return sat_field;
++}
++
++static void noc_set_qos_mode(void __iomem *base, uint32_t qos_off,
++ uint32_t mport, uint32_t qos_delta, uint8_t mode,
++ uint8_t perm_mode)
++{
++ if (mode < NOC_QOS_MODE_MAX &&
++ ((1 << mode) & perm_mode)) {
++ uint32_t reg_val;
++
++ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
++ mport, qos_delta)) & NOC_QOS_MODEn_RMSK;
++ writel_relaxed(((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) |
++ (mode & NOC_QOS_MODEn_MODE_BMSK)),
++ NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta));
++ }
++ /* Ensure qos mode is set before exiting */
++ wmb();
++}
++
++static void noc_set_qos_priority(void __iomem *base, uint32_t qos_off,
++ uint32_t mport, uint32_t qos_delta,
++ struct msm_bus_noc_qos_priority *priority)
++{
++ uint32_t reg_val, val;
++
++ reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport,
++ qos_delta)) & NOC_QOS_PRIORITYn_RMSK;
++ val = priority->p1 << NOC_QOS_PRIORITYn_P1_SHFT;
++ writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P1_BMSK))) |
++ (val & NOC_QOS_PRIORITYn_P1_BMSK)),
++ NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta));
++
++ reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport,
++ qos_delta))
++ & NOC_QOS_PRIORITYn_RMSK;
++ writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P0_BMSK))) |
++ (priority->p0 & NOC_QOS_PRIORITYn_P0_BMSK)),
++ NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta));
++ /* Ensure qos priority is set before exiting */
++ wmb();
++}
++
++static void msm_bus_noc_set_qos_bw(void __iomem *base, uint32_t qos_off,
++ uint32_t qos_freq, uint32_t mport, uint32_t qos_delta,
++ uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw)
++{
++ uint32_t reg_val, val, mode;
++
++ if (!qos_freq) {
++ MSM_BUS_DBG("Zero QoS Freq\n");
++ return;
++ }
++
++
++ /* If Limiter or Regulator modes are not supported, bw not available*/
++ if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER |
++ NOC_QOS_PERM_MODE_REGULATOR)) {
++ uint32_t bw_val = noc_bw_field(qbw->bw, qos_freq);
++ uint32_t sat_val = noc_sat_field(qbw->bw, qbw->ws,
++ qos_freq);
++
++ MSM_BUS_DBG("NOC: BW: perm_mode: %d bw_val: %d, sat_val: %d\n",
++ perm_mode, bw_val, sat_val);
++ /*
++ * If in Limiter/Regulator mode, first go to fixed mode.
++ * Clear QoS accumulator
++ **/
++ mode = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
++ mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK;
++ if (mode == NOC_QOS_MODE_REGULATOR || mode ==
++ NOC_QOS_MODE_LIMITER) {
++ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(
++ base, qos_off, mport, qos_delta));
++ val = NOC_QOS_MODE_FIXED;
++ writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK)))
++ | (val & NOC_QOS_MODEn_MODE_BMSK),
++ NOC_QOS_MODEn_ADDR(base, qos_off, mport,
++ qos_delta));
++ }
++
++ reg_val = readl_relaxed(NOC_QOS_BWn_ADDR(base, qos_off, mport,
++ qos_delta));
++ val = bw_val << NOC_QOS_BWn_BW_SHFT;
++ writel_relaxed(((reg_val & (~(NOC_QOS_BWn_BW_BMSK))) |
++ (val & NOC_QOS_BWn_BW_BMSK)),
++ NOC_QOS_BWn_ADDR(base, qos_off, mport, qos_delta));
++
++ MSM_BUS_DBG("NOC: BW: Wrote value: 0x%x\n", ((reg_val &
++ (~NOC_QOS_BWn_BW_BMSK)) | (val &
++ NOC_QOS_BWn_BW_BMSK)));
++
++ reg_val = readl_relaxed(NOC_QOS_SATn_ADDR(base, qos_off,
++ mport, qos_delta));
++ val = sat_val << NOC_QOS_SATn_SAT_SHFT;
++ writel_relaxed(((reg_val & (~(NOC_QOS_SATn_SAT_BMSK))) |
++ (val & NOC_QOS_SATn_SAT_BMSK)),
++ NOC_QOS_SATn_ADDR(base, qos_off, mport, qos_delta));
++
++ MSM_BUS_DBG("NOC: SAT: Wrote value: 0x%x\n", ((reg_val &
++ (~NOC_QOS_SATn_SAT_BMSK)) | (val &
++ NOC_QOS_SATn_SAT_BMSK)));
++
++ /* Set mode back to what it was initially */
++ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
++ mport, qos_delta));
++ writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK)))
++ | (mode & NOC_QOS_MODEn_MODE_BMSK),
++ NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta));
++ /* Ensure that all writes for bandwidth registers have
++ * completed before returning
++ */
++ wmb();
++ }
++}
++
++uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off,
++ uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode)
++{
++ if (NOC_QOS_MODES_ALL_PERM == perm_mode)
++ return readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
++ mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK;
++ else
++ return 31 - __CLZ(mode &
++ NOC_QOS_MODES_ALL_PERM);
++}
++
++void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off,
++ uint32_t mport, uint32_t qos_delta,
++ struct msm_bus_noc_qos_priority *priority)
++{
++ priority->p1 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off,
++ mport, qos_delta)) & NOC_QOS_PRIORITYn_P1_BMSK) >>
++ NOC_QOS_PRIORITYn_P1_SHFT;
++
++ priority->p0 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off,
++ mport, qos_delta)) & NOC_QOS_PRIORITYn_P0_BMSK) >>
++ NOC_QOS_PRIORITYn_P0_SHFT;
++}
++
++void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off,
++ uint32_t qos_freq,
++ uint32_t mport, uint32_t qos_delta, uint8_t perm_mode,
++ struct msm_bus_noc_qos_bw *qbw)
++{
++ if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER |
++ NOC_QOS_PERM_MODE_REGULATOR)) {
++ uint32_t bw_val = readl_relaxed(NOC_QOS_BWn_ADDR(
++ base, qos_off, mport, qos_delta)) & NOC_QOS_BWn_BW_BMSK;
++ uint32_t sat = readl_relaxed(NOC_QOS_SATn_ADDR(
++ base, qos_off, mport, qos_delta))
++ & NOC_QOS_SATn_SAT_BMSK;
++
++ qbw->bw = noc_bw(bw_val, qos_freq);
++ qbw->ws = noc_ws(qbw->bw, sat, qos_freq);
++ } else {
++ qbw->bw = 0;
++ qbw->ws = 0;
++ }
++}
++
++static int msm_bus_noc_mas_init(struct msm_bus_noc_info *ninfo,
++ struct msm_bus_inode_info *info)
++{
++ int i;
++ struct msm_bus_noc_qos_priority *prio;
++ prio = kzalloc(sizeof(struct msm_bus_noc_qos_priority),
++ GFP_KERNEL);
++ if (!prio) {
++ MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n",
++ info->node_info->id);
++ return -ENOMEM;
++ }
++
++ prio->read_prio = info->node_info->prio_rd;
++ prio->write_prio = info->node_info->prio_wr;
++ prio->p1 = info->node_info->prio1;
++ prio->p0 = info->node_info->prio0;
++ info->hw_data = (void *)prio;
++
++ if (!info->node_info->qport) {
++ MSM_BUS_DBG("No QoS Ports to init\n");
++ return 0;
++ }
++
++ for (i = 0; i < info->node_info->num_mports; i++) {
++ if (info->node_info->mode != NOC_QOS_MODE_BYPASS) {
++ noc_set_qos_priority(ninfo->base, ninfo->qos_baseoffset,
++ info->node_info->qport[i], ninfo->qos_delta,
++ prio);
++
++ if (info->node_info->mode != NOC_QOS_MODE_FIXED) {
++ struct msm_bus_noc_qos_bw qbw;
++ qbw.ws = info->node_info->ws;
++ qbw.bw = 0;
++ msm_bus_noc_set_qos_bw(ninfo->base,
++ ninfo->qos_baseoffset,
++ ninfo->qos_freq, info->node_info->
++ qport[i], ninfo->qos_delta,
++ info->node_info->perm_mode,
++ &qbw);
++ }
++ }
++
++ noc_set_qos_mode(ninfo->base, ninfo->qos_baseoffset,
++ info->node_info->qport[i], ninfo->qos_delta,
++ info->node_info->mode,
++ info->node_info->perm_mode);
++ }
++
++ return 0;
++}
++
++static void msm_bus_noc_node_init(void *hw_data,
++ struct msm_bus_inode_info *info)
++{
++ struct msm_bus_noc_info *ninfo =
++ (struct msm_bus_noc_info *)hw_data;
++
++ if (!IS_SLAVE(info->node_info->priv_id))
++ if (info->node_info->hw_sel != MSM_BUS_RPM)
++ msm_bus_noc_mas_init(ninfo, info);
++}
++
++static int msm_bus_noc_allocate_commit_data(struct msm_bus_fabric_registration
++ *fab_pdata, void **cdata, int ctx)
++{
++ struct msm_bus_noc_commit **cd = (struct msm_bus_noc_commit **)cdata;
++ struct msm_bus_noc_info *ninfo =
++ (struct msm_bus_noc_info *)fab_pdata->hw_data;
++
++ *cd = kzalloc(sizeof(struct msm_bus_noc_commit), GFP_KERNEL);
++ if (!*cd) {
++ MSM_BUS_DBG("Couldn't alloc mem for cdata\n");
++ return -ENOMEM;
++ }
++
++ (*cd)->mas = ninfo->cdata[ctx].mas;
++ (*cd)->slv = ninfo->cdata[ctx].slv;
++
++ return 0;
++}
++
++static void *msm_bus_noc_allocate_noc_data(struct platform_device *pdev,
++ struct msm_bus_fabric_registration *fab_pdata)
++{
++ struct resource *noc_mem;
++ struct resource *noc_io;
++ struct msm_bus_noc_info *ninfo;
++ int i;
++
++ ninfo = kzalloc(sizeof(struct msm_bus_noc_info), GFP_KERNEL);
++ if (!ninfo) {
++ MSM_BUS_DBG("Couldn't alloc mem for noc info\n");
++ return NULL;
++ }
++
++ ninfo->nmasters = fab_pdata->nmasters;
++ ninfo->nqos_masters = fab_pdata->nmasters;
++ ninfo->nslaves = fab_pdata->nslaves;
++ ninfo->qos_freq = fab_pdata->qos_freq;
++
++ if (!fab_pdata->qos_baseoffset)
++ ninfo->qos_baseoffset = QOS_DEFAULT_BASEOFFSET;
++ else
++ ninfo->qos_baseoffset = fab_pdata->qos_baseoffset;
++
++ if (!fab_pdata->qos_delta)
++ ninfo->qos_delta = QOS_DEFAULT_DELTA;
++ else
++ ninfo->qos_delta = fab_pdata->qos_delta;
++
++ ninfo->mas_modes = kzalloc(sizeof(uint32_t) * fab_pdata->nmasters,
++ GFP_KERNEL);
++ if (!ninfo->mas_modes) {
++ MSM_BUS_DBG("Couldn't alloc mem for noc master-modes\n");
++ kfree(ninfo);
++ return NULL;
++ }
++
++ for (i = 0; i < NUM_CTX; i++) {
++ ninfo->cdata[i].mas = kzalloc(sizeof(struct
++ msm_bus_node_hw_info) * fab_pdata->nmasters * 2,
++ GFP_KERNEL);
++ if (!ninfo->cdata[i].mas) {
++ MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n");
++ kfree(ninfo->mas_modes);
++ kfree(ninfo);
++ return NULL;
++ }
++
++ ninfo->cdata[i].slv = kzalloc(sizeof(struct
++ msm_bus_node_hw_info) * fab_pdata->nslaves * 2,
++ GFP_KERNEL);
++ if (!ninfo->cdata[i].slv) {
++ MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n");
++ kfree(ninfo->cdata[i].mas);
++ goto err;
++ }
++ }
++
++ /* If it's a virtual fabric, don't get memory info */
++ if (fab_pdata->virt)
++ goto skip_mem;
++
++ noc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!noc_mem && !fab_pdata->virt) {
++ MSM_BUS_ERR("Cannot get NoC Base address\n");
++ goto err;
++ }
++
++ noc_io = request_mem_region(noc_mem->start,
++ resource_size(noc_mem), pdev->name);
++ if (!noc_io) {
++ MSM_BUS_ERR("NoC memory unavailable\n");
++ goto err;
++ }
++
++ ninfo->base = ioremap(noc_mem->start, resource_size(noc_mem));
++ if (!ninfo->base) {
++ MSM_BUS_ERR("IOremap failed for NoC!\n");
++ release_mem_region(noc_mem->start, resource_size(noc_mem));
++ goto err;
++ }
++
++skip_mem:
++ fab_pdata->hw_data = (void *)ninfo;
++ return (void *)ninfo;
++
++err:
++ kfree(ninfo->mas_modes);
++ kfree(ninfo);
++ return NULL;
++}
++
++static void free_commit_data(void *cdata)
++{
++ struct msm_bus_noc_commit *cd = (struct msm_bus_noc_commit *)cdata;
++
++ kfree(cd->mas);
++ kfree(cd->slv);
++ kfree(cd);
++}
++
++static bool msm_bus_noc_update_bw_reg(int mode)
++{
++ bool ret = false;
++
++ if ((mode == NOC_QOS_MODE_LIMITER) ||
++ (mode == NOC_QOS_MODE_REGULATOR))
++ ret = true;
++
++ return ret;
++}
++
++static void msm_bus_noc_update_bw(struct msm_bus_inode_info *hop,
++ struct msm_bus_inode_info *info,
++ struct msm_bus_fabric_registration *fab_pdata,
++ void *sel_cdata, int *master_tiers,
++ int64_t add_bw)
++{
++ struct msm_bus_noc_info *ninfo;
++ struct msm_bus_noc_qos_bw qos_bw;
++ int i, ports;
++ int64_t bw;
++ struct msm_bus_noc_commit *sel_cd =
++ (struct msm_bus_noc_commit *)sel_cdata;
++
++ ninfo = (struct msm_bus_noc_info *)fab_pdata->hw_data;
++ if (!ninfo->qos_freq) {
++ MSM_BUS_DBG("NOC: No qos frequency to update bw\n");
++ return;
++ }
++
++ if (info->node_info->num_mports == 0) {
++ MSM_BUS_DBG("NOC: Skip Master BW\n");
++ goto skip_mas_bw;
++ }
++
++ ports = info->node_info->num_mports;
++ bw = INTERLEAVED_BW(fab_pdata, add_bw, ports);
++
++ MSM_BUS_DBG("NOC: Update bw for: %d: %lld\n",
++ info->node_info->priv_id, add_bw);
++ for (i = 0; i < ports; i++) {
++ sel_cd->mas[info->node_info->masterp[i]].bw += bw;
++ sel_cd->mas[info->node_info->masterp[i]].hw_id =
++ info->node_info->mas_hw_id;
++ MSM_BUS_DBG("NOC: Update mas_bw: ID: %d, BW: %llu ports:%d\n",
++ info->node_info->priv_id,
++ sel_cd->mas[info->node_info->masterp[i]].bw,
++ ports);
++ /* Check if info is a shared master.
++ * If it is, mark it dirty
++ * If it isn't, then set QOS Bandwidth
++ **/
++ if (info->node_info->hw_sel == MSM_BUS_RPM)
++ sel_cd->mas[info->node_info->masterp[i]].dirty = 1;
++ else {
++ if (!info->node_info->qport) {
++ MSM_BUS_DBG("No qos ports to update!\n");
++ break;
++ }
++
++ if (!(info->node_info->mode == NOC_QOS_MODE_REGULATOR)
++ || (info->node_info->mode ==
++ NOC_QOS_MODE_LIMITER)) {
++ MSM_BUS_DBG("Skip QoS reg programming\n");
++ break;
++ }
++ qos_bw.bw = sel_cd->mas[info->node_info->masterp[i]].
++ bw;
++ qos_bw.ws = info->node_info->ws;
++ msm_bus_noc_set_qos_bw(ninfo->base,
++ ninfo->qos_baseoffset,
++ ninfo->qos_freq,
++ info->node_info->qport[i], ninfo->qos_delta,
++ info->node_info->perm_mode, &qos_bw);
++ MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n",
++ qos_bw.ws);
++ }
++ }
++
++skip_mas_bw:
++ ports = hop->node_info->num_sports;
++ for (i = 0; i < ports; i++) {
++ sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw;
++ sel_cd->slv[hop->node_info->slavep[i]].hw_id =
++ hop->node_info->slv_hw_id;
++ MSM_BUS_DBG("NOC: Update slave_bw for ID: %d -> %llu\n",
++ hop->node_info->priv_id,
++ sel_cd->slv[hop->node_info->slavep[i]].bw);
++ MSM_BUS_DBG("NOC: Update slave_bw for hw_id: %d, index: %d\n",
++ hop->node_info->slv_hw_id, hop->node_info->slavep[i]);
++ /* Check if hop is a shared slave.
++ * If it is, mark it dirty
++ * If it isn't, then nothing to be done as the
++ * slaves are in bypass mode.
++ **/
++ if (hop->node_info->hw_sel == MSM_BUS_RPM)
++ sel_cd->slv[hop->node_info->slavep[i]].dirty = 1;
++ }
++}
++
++static int msm_bus_noc_commit(struct msm_bus_fabric_registration
++ *fab_pdata, void *hw_data, void **cdata)
++{
++ MSM_BUS_DBG("\nReached NOC Commit\n");
++ msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata);
++ return 0;
++}
++
++static int msm_bus_noc_port_halt(uint32_t haltid, uint8_t mport)
++{
++ return 0;
++}
++
++static int msm_bus_noc_port_unhalt(uint32_t haltid, uint8_t mport)
++{
++ return 0;
++}
++
++static int msm_bus_noc_qos_init(struct msm_bus_node_device_type *info,
++ void __iomem *qos_base,
++ uint32_t qos_off, uint32_t qos_delta,
++ uint32_t qos_freq)
++{
++ struct msm_bus_noc_qos_priority prio;
++ int ret = 0;
++ int i;
++
++ prio.p1 = info->node_info->qos_params.prio1;
++ prio.p0 = info->node_info->qos_params.prio0;
++
++ if (!info->node_info->qport) {
++ MSM_BUS_DBG("No QoS Ports to init\n");
++ ret = 0;
++ goto err_qos_init;
++ }
++
++ for (i = 0; i < info->node_info->num_qports; i++) {
++ if (info->node_info->qos_params.mode != NOC_QOS_MODE_BYPASS) {
++ noc_set_qos_priority(qos_base, qos_off,
++ info->node_info->qport[i], qos_delta,
++ &prio);
++
++ if (info->node_info->qos_params.mode !=
++ NOC_QOS_MODE_FIXED) {
++ struct msm_bus_noc_qos_bw qbw;
++ qbw.ws = info->node_info->qos_params.ws;
++ qbw.bw = 0;
++ msm_bus_noc_set_qos_bw(qos_base, qos_off,
++ qos_freq,
++ info->node_info->qport[i],
++ qos_delta,
++ info->node_info->qos_params.mode,
++ &qbw);
++ }
++ }
++
++ noc_set_qos_mode(qos_base, qos_off, info->node_info->qport[i],
++ qos_delta, info->node_info->qos_params.mode,
++ (1 << info->node_info->qos_params.mode));
++ }
++err_qos_init:
++ return ret;
++}
++
++static int msm_bus_noc_set_bw(struct msm_bus_node_device_type *dev,
++ void __iomem *qos_base,
++ uint32_t qos_off, uint32_t qos_delta,
++ uint32_t qos_freq)
++{
++ int ret = 0;
++ uint64_t bw = 0;
++ int i;
++ struct msm_bus_node_info_type *info = dev->node_info;
++
++ if (info && info->num_qports &&
++ ((info->qos_params.mode == NOC_QOS_MODE_REGULATOR) ||
++ (info->qos_params.mode ==
++ NOC_QOS_MODE_LIMITER))) {
++ struct msm_bus_noc_qos_bw qos_bw;
++
++ bw = msm_bus_div64(info->num_qports,
++ dev->node_ab.ab[DUAL_CTX]);
++
++ for (i = 0; i < info->num_qports; i++) {
++ if (!info->qport) {
++ MSM_BUS_DBG("No qos ports to update!\n");
++ break;
++ }
++
++ qos_bw.bw = bw;
++ qos_bw.ws = info->qos_params.ws;
++ msm_bus_noc_set_qos_bw(qos_base, qos_off, qos_freq,
++ info->qport[i], qos_delta,
++ info->qos_params.mode, &qos_bw);
++ MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n",
++ qos_bw.ws);
++ }
++ }
++ return ret;
++}
++int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata,
++ struct msm_bus_hw_algorithm *hw_algo)
++{
++ /* Set interleaving to true by default */
++ pdata->il_flag = true;
++ hw_algo->allocate_commit_data = msm_bus_noc_allocate_commit_data;
++ hw_algo->allocate_hw_data = msm_bus_noc_allocate_noc_data;
++ hw_algo->node_init = msm_bus_noc_node_init;
++ hw_algo->free_commit_data = free_commit_data;
++ hw_algo->update_bw = msm_bus_noc_update_bw;
++ hw_algo->commit = msm_bus_noc_commit;
++ hw_algo->port_halt = msm_bus_noc_port_halt;
++ hw_algo->port_unhalt = msm_bus_noc_port_unhalt;
++ hw_algo->update_bw_reg = msm_bus_noc_update_bw_reg;
++ hw_algo->config_master = NULL;
++ hw_algo->config_limiter = NULL;
++
++ return 0;
++}
++
++int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev)
++{
++ if (!bus_dev)
++ return -ENODEV;
++ else {
++ bus_dev->fabdev->noc_ops.qos_init = msm_bus_noc_qos_init;
++ bus_dev->fabdev->noc_ops.set_bw = msm_bus_noc_set_bw;
++ bus_dev->fabdev->noc_ops.limit_mport = NULL;
++ bus_dev->fabdev->noc_ops.update_bw_reg =
++ msm_bus_noc_update_bw_reg;
++ }
++ return 0;
++}
++EXPORT_SYMBOL(msm_bus_noc_set_ops);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_noc.h
+@@ -0,0 +1,76 @@
++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H
++#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H
++
++enum msm_bus_noc_qos_mode_type {
++ NOC_QOS_MODE_FIXED = 0,
++ NOC_QOS_MODE_LIMITER,
++ NOC_QOS_MODE_BYPASS,
++ NOC_QOS_MODE_REGULATOR,
++ NOC_QOS_MODE_MAX,
++};
++
++enum msm_bus_noc_qos_mode_perm {
++ NOC_QOS_PERM_MODE_FIXED = (1 << NOC_QOS_MODE_FIXED),
++ NOC_QOS_PERM_MODE_LIMITER = (1 << NOC_QOS_MODE_LIMITER),
++ NOC_QOS_PERM_MODE_BYPASS = (1 << NOC_QOS_MODE_BYPASS),
++ NOC_QOS_PERM_MODE_REGULATOR = (1 << NOC_QOS_MODE_REGULATOR),
++};
++
++#define NOC_QOS_MODES_ALL_PERM (NOC_QOS_PERM_MODE_FIXED | \
++ NOC_QOS_PERM_MODE_LIMITER | NOC_QOS_PERM_MODE_BYPASS | \
++ NOC_QOS_PERM_MODE_REGULATOR)
++
++struct msm_bus_noc_commit {
++ struct msm_bus_node_hw_info *mas;
++ struct msm_bus_node_hw_info *slv;
++};
++
++struct msm_bus_noc_info {
++ void __iomem *base;
++ uint32_t base_addr;
++ uint32_t nmasters;
++ uint32_t nqos_masters;
++ uint32_t nslaves;
++ uint32_t qos_freq; /* QOS Clock in KHz */
++ uint32_t qos_baseoffset;
++ uint32_t qos_delta;
++ uint32_t *mas_modes;
++ struct msm_bus_noc_commit cdata[NUM_CTX];
++};
++
++struct msm_bus_noc_qos_priority {
++ uint32_t high_prio;
++ uint32_t low_prio;
++ uint32_t read_prio;
++ uint32_t write_prio;
++ uint32_t p1;
++ uint32_t p0;
++};
++
++struct msm_bus_noc_qos_bw {
++ uint64_t bw; /* Bandwidth in bytes per second */
++ uint32_t ws; /* Window size in nano seconds */
++};
++
++void msm_bus_noc_init(struct msm_bus_noc_info *ninfo);
++uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off,
++ uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode);
++void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off,
++ uint32_t mport, uint32_t qos_delta,
++ struct msm_bus_noc_qos_priority *qprio);
++void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off,
++ uint32_t qos_freq, uint32_t mport, uint32_t qos_delta,
++ uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw);
++#endif /*_ARCH_ARM_MACH_MSM_BUS_NOC_H */
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_of.c
+@@ -0,0 +1,705 @@
++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include "msm-bus.h"
++#include "msm-bus-board.h"
++#include "msm_bus_core.h"
++
++static const char * const hw_sel_name[] = {"RPM", "NoC", "BIMC", NULL};
++static const char * const mode_sel_name[] = {"Fixed", "Limiter", "Bypass",
++ "Regulator", NULL};
++
++static int get_num(const char *const str[], const char *name)
++{
++ int i = 0;
++
++ do {
++ if (!strcmp(name, str[i]))
++ return i;
++
++ i++;
++ } while (str[i] != NULL);
++
++ pr_err("Error: string %s not found\n", name);
++ return -EINVAL;
++}
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
++static struct msm_bus_scale_pdata *get_pdata(struct platform_device *pdev,
++ struct device_node *of_node)
++{
++ struct msm_bus_scale_pdata *pdata = NULL;
++ struct msm_bus_paths *usecase = NULL;
++ int i = 0, j, ret, num_usecases = 0, num_paths, len;
++ const uint32_t *vec_arr = NULL;
++ bool mem_err = false;
++
++ if (!pdev) {
++ pr_err("Error: Null Platform device\n");
++ return NULL;
++ }
++
++ pdata = devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_scale_pdata),
++ GFP_KERNEL);
++ if (!pdata) {
++ pr_err("Error: Memory allocation for pdata failed\n");
++ mem_err = true;
++ goto err;
++ }
++
++ ret = of_property_read_string(of_node, "qcom,msm-bus,name",
++ &pdata->name);
++ if (ret) {
++ pr_err("Error: Client name not found\n");
++ goto err;
++ }
++
++ ret = of_property_read_u32(of_node, "qcom,msm-bus,num-cases",
++ &num_usecases);
++ if (ret) {
++ pr_err("Error: num-usecases not found\n");
++ goto err;
++ }
++
++ pdata->num_usecases = num_usecases;
++
++ if (of_property_read_bool(of_node, "qcom,msm-bus,active-only"))
++ pdata->active_only = 1;
++ else {
++ pr_debug("active_only flag absent.\n");
++ pr_debug("Using dual context by default\n");
++ }
++
++ usecase = devm_kzalloc(&pdev->dev, (sizeof(struct msm_bus_paths) *
++ pdata->num_usecases), GFP_KERNEL);
++ if (!usecase) {
++ pr_err("Error: Memory allocation for paths failed\n");
++ mem_err = true;
++ goto err;
++ }
++
++ ret = of_property_read_u32(of_node, "qcom,msm-bus,num-paths",
++ &num_paths);
++ if (ret) {
++ pr_err("Error: num_paths not found\n");
++ goto err;
++ }
++
++ vec_arr = of_get_property(of_node, "qcom,msm-bus,vectors-KBps", &len);
++ if (vec_arr == NULL) {
++ pr_err("Error: Vector array not found\n");
++ goto err;
++ }
++
++ if (len != num_usecases * num_paths * sizeof(uint32_t) * 4) {
++ pr_err("Error: Length-error on getting vectors\n");
++ goto err;
++ }
++
++ for (i = 0; i < num_usecases; i++) {
++ usecase[i].num_paths = num_paths;
++ usecase[i].vectors = devm_kzalloc(&pdev->dev, num_paths *
++ sizeof(struct msm_bus_vectors), GFP_KERNEL);
++ if (!usecase[i].vectors) {
++ mem_err = true;
++ pr_err("Error: Mem alloc failure in vectors\n");
++ goto err;
++ }
++
++ for (j = 0; j < num_paths; j++) {
++ int index = ((i * num_paths) + j) * 4;
++ usecase[i].vectors[j].src = be32_to_cpu(vec_arr[index]);
++ usecase[i].vectors[j].dst =
++ be32_to_cpu(vec_arr[index + 1]);
++ usecase[i].vectors[j].ab = (uint64_t)
++ KBTOB(be32_to_cpu(vec_arr[index + 2]));
++ usecase[i].vectors[j].ib = (uint64_t)
++ KBTOB(be32_to_cpu(vec_arr[index + 3]));
++ }
++ }
++
++ pdata->usecase = usecase;
++ return pdata;
++err:
++ if (mem_err) {
++ for (; i > 0; i--)
++ kfree(usecase[i-1].vectors);
++
++ kfree(usecase);
++ kfree(pdata);
++ }
++
++ return NULL;
++}
++
++/**
++ * msm_bus_cl_get_pdata() - Generate bus client data from device tree
++ * provided by clients.
++ *
++ * of_node: Device tree node to extract information from
++ *
++ * The function returns a valid pointer to the allocated bus-scale-pdata
++ * if the vectors were correctly read from the client's device node.
++ * Any error in reading or parsing the device node will return NULL
++ * to the caller.
++ */
++struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev)
++{
++ struct device_node *of_node;
++ struct msm_bus_scale_pdata *pdata = NULL;
++
++ if (!pdev) {
++ pr_err("Error: Null Platform device\n");
++ return NULL;
++ }
++
++ of_node = pdev->dev.of_node;
++ pdata = get_pdata(pdev, of_node);
++ if (!pdata) {
++ pr_err("client has to provide missing entry for successful registration\n");
++ return NULL;
++ }
++
++ return pdata;
++}
++EXPORT_SYMBOL(msm_bus_cl_get_pdata);
++
++/**
++ * msm_bus_cl_pdata_from_node() - Generate bus client data from device tree
++ * node provided by clients. This function should be used when a client
++ * driver needs to register multiple bus-clients from a single device-tree
++ * node associated with the platform-device.
++ *
++ * of_node: The subnode containing information about the bus scaling
++ * data
++ *
++ * pdev: Platform device associated with the device-tree node
++ *
++ * The function returns a valid pointer to the allocated bus-scale-pdata
++ * if the vectors were correctly read from the client's device node.
++ * Any error in reading or parsing the device node will return NULL
++ * to the caller.
++ */
++struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
++ struct platform_device *pdev, struct device_node *of_node)
++{
++ struct msm_bus_scale_pdata *pdata = NULL;
++
++ if (!pdev) {
++ pr_err("Error: Null Platform device\n");
++ return NULL;
++ }
++
++ if (!of_node) {
++ pr_err("Error: Null of_node passed to bus driver\n");
++ return NULL;
++ }
++
++ pdata = get_pdata(pdev, of_node);
++ if (!pdata) {
++ pr_err("client has to provide missing entry for successful registration\n");
++ return NULL;
++ }
++
++ return pdata;
++}
++EXPORT_SYMBOL(msm_bus_pdata_from_node);
++
++/**
++ * msm_bus_cl_clear_pdata() - Clear pdata allocated from device-tree
++ * of_node: Device tree node to extract information from
++ */
++void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata)
++{
++ int i;
++
++ for (i = 0; i < pdata->num_usecases; i++)
++ kfree(pdata->usecase[i].vectors);
++
++ kfree(pdata->usecase);
++ kfree(pdata);
++}
++EXPORT_SYMBOL(msm_bus_cl_clear_pdata);
++#endif
++
++static int *get_arr(struct platform_device *pdev,
++ const struct device_node *node, const char *prop,
++ int *nports)
++{
++ int size = 0, ret;
++ int *arr = NULL;
++
++ if (of_get_property(node, prop, &size)) {
++ *nports = size / sizeof(int);
++ } else {
++ pr_debug("Property %s not available\n", prop);
++ *nports = 0;
++ return NULL;
++ }
++
++ if (!size) {
++ *nports = 0;
++ return NULL;
++ }
++
++ arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
++ if (ZERO_OR_NULL_PTR(arr)) {
++ pr_err("Error: Failed to alloc mem for %s\n", prop);
++ return NULL;
++ }
++
++ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
++ if (ret) {
++ pr_err("Error in reading property: %s\n", prop);
++ goto err;
++ }
++
++ return arr;
++err:
++ devm_kfree(&pdev->dev, arr);
++ return NULL;
++}
++
++static u64 *get_th_params(struct platform_device *pdev,
++ const struct device_node *node, const char *prop,
++ int *nports)
++{
++ int size = 0, ret;
++ u64 *ret_arr = NULL;
++ int *arr = NULL;
++ int i;
++
++ if (of_get_property(node, prop, &size)) {
++ *nports = size / sizeof(int);
++ } else {
++ pr_debug("Property %s not available\n", prop);
++ *nports = 0;
++ return NULL;
++ }
++
++ if (!size) {
++ *nports = 0;
++ return NULL;
++ }
++
++ ret_arr = devm_kzalloc(&pdev->dev, (*nports * sizeof(u64)),
++ GFP_KERNEL);
++ if (ZERO_OR_NULL_PTR(ret_arr)) {
++ pr_err("Error: Failed to alloc mem for ret arr %s\n", prop);
++ return NULL;
++ }
++
++ arr = kzalloc(size, GFP_KERNEL);
++ if ((ZERO_OR_NULL_PTR(arr))) {
++ pr_err("Error: Failed to alloc temp mem for %s\n", prop);
++ return NULL;
++ }
++
++ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
++ if (ret) {
++ pr_err("Error in reading property: %s\n", prop);
++ goto err;
++ }
++
++ for (i = 0; i < *nports; i++)
++ ret_arr[i] = (uint64_t)KBTOB(arr[i]);
++
++ MSM_BUS_DBG("%s: num entries %d prop %s", __func__, *nports, prop);
++
++ for (i = 0; i < *nports; i++)
++ MSM_BUS_DBG("Th %d val %llu", i, ret_arr[i]);
++
++ kfree(arr);
++ return ret_arr;
++err:
++ kfree(arr);
++ devm_kfree(&pdev->dev, ret_arr);
++ return NULL;
++}
++
++static struct msm_bus_node_info *get_nodes(struct device_node *of_node,
++ struct platform_device *pdev,
++ struct msm_bus_fabric_registration *pdata)
++{
++ struct msm_bus_node_info *info;
++ struct device_node *child_node = NULL;
++ int i = 0, ret;
++ int num_bw = 0;
++ u32 temp;
++
++ for_each_child_of_node(of_node, child_node) {
++ i++;
++ }
++
++ pdata->len = i;
++ info = (struct msm_bus_node_info *)
++ devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_node_info) *
++ pdata->len, GFP_KERNEL);
++ if (ZERO_OR_NULL_PTR(info)) {
++ pr_err("Failed to alloc memory for nodes: %d\n", pdata->len);
++ goto err;
++ }
++
++ i = 0;
++ child_node = NULL;
++ for_each_child_of_node(of_node, child_node) {
++ const char *sel_str;
++
++ ret = of_property_read_string(child_node, "label",
++ &info[i].name);
++ if (ret)
++ pr_err("Error reading node label\n");
++
++ ret = of_property_read_u32(child_node, "cell-id", &info[i].id);
++ if (ret) {
++ pr_err("Error reading node id\n");
++ goto err;
++ }
++
++ if (of_property_read_bool(child_node, "qcom,gateway"))
++ info[i].gateway = 1;
++
++ of_property_read_u32(child_node, "qcom,mas-hw-id",
++ &info[i].mas_hw_id);
++
++ of_property_read_u32(child_node, "qcom,slv-hw-id",
++ &info[i].slv_hw_id);
++ info[i].masterp = get_arr(pdev, child_node,
++ "qcom,masterp", &info[i].num_mports);
++ /* No need to store number of qports */
++ info[i].qport = get_arr(pdev, child_node,
++ "qcom,qport", &ret);
++ pdata->nmasters += info[i].num_mports;
++
++
++ info[i].slavep = get_arr(pdev, child_node,
++ "qcom,slavep", &info[i].num_sports);
++ pdata->nslaves += info[i].num_sports;
++
++
++ info[i].tier = get_arr(pdev, child_node,
++ "qcom,tier", &info[i].num_tiers);
++
++ if (of_property_read_bool(child_node, "qcom,ahb"))
++ info[i].ahb = 1;
++
++ ret = of_property_read_string(child_node, "qcom,hw-sel",
++ &sel_str);
++ if (ret)
++ info[i].hw_sel = 0;
++ else {
++ ret = get_num(hw_sel_name, sel_str);
++ if (ret < 0) {
++ pr_err("Invalid hw-sel\n");
++ goto err;
++ }
++
++ info[i].hw_sel = ret;
++ }
++
++ of_property_read_u32(child_node, "qcom,buswidth",
++ &info[i].buswidth);
++ of_property_read_u32(child_node, "qcom,ws", &info[i].ws);
++
++ info[i].dual_conf =
++ of_property_read_bool(child_node, "qcom,dual-conf");
++
++
++ info[i].th = get_th_params(pdev, child_node, "qcom,thresh",
++ &info[i].num_thresh);
++
++ info[i].bimc_bw = get_th_params(pdev, child_node,
++ "qcom,bimc,bw", &num_bw);
++
++ if (num_bw != info[i].num_thresh) {
++ pr_err("%s:num_bw %d must equal num_thresh %d",
++ __func__, num_bw, info[i].num_thresh);
++ pr_err("%s:Err setting up dual conf for %s",
++ __func__, info[i].name);
++ goto err;
++ }
++
++ of_property_read_u32(child_node, "qcom,bimc,gp",
++ &info[i].bimc_gp);
++ of_property_read_u32(child_node, "qcom,bimc,thmp",
++ &info[i].bimc_thmp);
++
++ ret = of_property_read_string(child_node, "qcom,mode-thresh",
++ &sel_str);
++ if (ret)
++ info[i].mode_thresh = 0;
++ else {
++ ret = get_num(mode_sel_name, sel_str);
++ if (ret < 0) {
++ pr_err("Unknown mode :%s\n", sel_str);
++ goto err;
++ }
++
++ info[i].mode_thresh = ret;
++ MSM_BUS_DBG("AXI: THreshold mode set: %d\n",
++ info[i].mode_thresh);
++ }
++
++ ret = of_property_read_string(child_node, "qcom,mode",
++ &sel_str);
++
++ if (ret)
++ info[i].mode = 0;
++ else {
++ ret = get_num(mode_sel_name, sel_str);
++ if (ret < 0) {
++ pr_err("Unknown mode :%s\n", sel_str);
++ goto err;
++ }
++
++ info[i].mode = ret;
++ }
++
++ info[i].nr_lim =
++ of_property_read_bool(child_node, "qcom,nr-lim");
++
++ ret = of_property_read_u32(child_node, "qcom,ff",
++ &info[i].ff);
++ if (ret) {
++ pr_debug("fudge factor not present %d", info[i].id);
++ info[i].ff = 0;
++ }
++
++ ret = of_property_read_u32(child_node, "qcom,floor-bw",
++ &temp);
++ if (ret) {
++ pr_debug("fabdev floor bw not present %d", info[i].id);
++ info[i].floor_bw = 0;
++ } else {
++ info[i].floor_bw = KBTOB(temp);
++ }
++
++ info[i].rt_mas =
++ of_property_read_bool(child_node, "qcom,rt-mas");
++
++ ret = of_property_read_string(child_node, "qcom,perm-mode",
++ &sel_str);
++ if (ret)
++ info[i].perm_mode = 0;
++ else {
++ ret = get_num(mode_sel_name, sel_str);
++ if (ret < 0)
++ goto err;
++
++ info[i].perm_mode = 1 << ret;
++ }
++
++ of_property_read_u32(child_node, "qcom,prio-lvl",
++ &info[i].prio_lvl);
++ of_property_read_u32(child_node, "qcom,prio-rd",
++ &info[i].prio_rd);
++ of_property_read_u32(child_node, "qcom,prio-wr",
++ &info[i].prio_wr);
++ of_property_read_u32(child_node, "qcom,prio0", &info[i].prio0);
++ of_property_read_u32(child_node, "qcom,prio1", &info[i].prio1);
++ ret = of_property_read_string(child_node, "qcom,slaveclk-dual",
++ &info[i].slaveclk[DUAL_CTX]);
++ if (!ret)
++ pr_debug("Got slaveclk_dual: %s\n",
++ info[i].slaveclk[DUAL_CTX]);
++ else
++ info[i].slaveclk[DUAL_CTX] = NULL;
++
++ ret = of_property_read_string(child_node,
++ "qcom,slaveclk-active", &info[i].slaveclk[ACTIVE_CTX]);
++ if (!ret)
++ pr_debug("Got slaveclk_active\n");
++ else
++ info[i].slaveclk[ACTIVE_CTX] = NULL;
++
++ ret = of_property_read_string(child_node, "qcom,memclk-dual",
++ &info[i].memclk[DUAL_CTX]);
++ if (!ret)
++ pr_debug("Got memclk_dual\n");
++ else
++ info[i].memclk[DUAL_CTX] = NULL;
++
++ ret = of_property_read_string(child_node, "qcom,memclk-active",
++ &info[i].memclk[ACTIVE_CTX]);
++ if (!ret)
++ pr_debug("Got memclk_active\n");
++ else
++ info[i].memclk[ACTIVE_CTX] = NULL;
++
++ ret = of_property_read_string(child_node, "qcom,iface-clk-node",
++ &info[i].iface_clk_node);
++ if (!ret)
++ pr_debug("Got iface_clk_node\n");
++ else
++ info[i].iface_clk_node = NULL;
++
++ pr_debug("Node name: %s\n", info[i].name);
++ of_node_put(child_node);
++ i++;
++ }
++
++ pr_debug("Bus %d added: %d masters\n", pdata->id, pdata->nmasters);
++ pr_debug("Bus %d added: %d slaves\n", pdata->id, pdata->nslaves);
++ return info;
++err:
++ return NULL;
++}
++
++void msm_bus_of_get_nfab(struct platform_device *pdev,
++ struct msm_bus_fabric_registration *pdata)
++{
++ struct device_node *of_node;
++ int ret, nfab = 0;
++
++ if (!pdev) {
++ pr_err("Error: Null platform device\n");
++ return;
++ }
++
++ of_node = pdev->dev.of_node;
++ ret = of_property_read_u32(of_node, "qcom,nfab",
++ &nfab);
++ if (!ret)
++ pr_debug("Fab_of: Read number of buses: %u\n", nfab);
++
++ msm_bus_board_set_nfab(pdata, nfab);
++}
++
++struct msm_bus_fabric_registration
++ *msm_bus_of_get_fab_data(struct platform_device *pdev)
++{
++ struct device_node *of_node;
++ struct msm_bus_fabric_registration *pdata;
++ bool mem_err = false;
++ int ret = 0;
++ const char *sel_str;
++ u32 temp;
++
++ if (!pdev) {
++ pr_err("Error: Null platform device\n");
++ return NULL;
++ }
++
++ of_node = pdev->dev.of_node;
++ pdata = devm_kzalloc(&pdev->dev,
++ sizeof(struct msm_bus_fabric_registration), GFP_KERNEL);
++ if (!pdata) {
++ pr_err("Error: Memory allocation for pdata failed\n");
++ mem_err = true;
++ goto err;
++ }
++
++ ret = of_property_read_string(of_node, "label", &pdata->name);
++ if (ret) {
++ pr_err("Error: label not found\n");
++ goto err;
++ }
++ pr_debug("Fab_of: Read name: %s\n", pdata->name);
++
++ ret = of_property_read_u32(of_node, "cell-id",
++ &pdata->id);
++ if (ret) {
++ pr_err("Error: num-usecases not found\n");
++ goto err;
++ }
++ pr_debug("Fab_of: Read id: %u\n", pdata->id);
++
++ if (of_property_read_bool(of_node, "qcom,ahb"))
++ pdata->ahb = 1;
++
++ ret = of_property_read_string(of_node, "qcom,fabclk-dual",
++ &pdata->fabclk[DUAL_CTX]);
++ if (ret) {
++ pr_debug("fabclk_dual not available\n");
++ pdata->fabclk[DUAL_CTX] = NULL;
++ } else
++ pr_debug("Fab_of: Read clk dual ctx: %s\n",
++ pdata->fabclk[DUAL_CTX]);
++ ret = of_property_read_string(of_node, "qcom,fabclk-active",
++ &pdata->fabclk[ACTIVE_CTX]);
++ if (ret) {
++ pr_debug("Error: fabclk_active not available\n");
++ pdata->fabclk[ACTIVE_CTX] = NULL;
++ } else
++ pr_debug("Fab_of: Read clk act ctx: %s\n",
++ pdata->fabclk[ACTIVE_CTX]);
++
++ ret = of_property_read_u32(of_node, "qcom,ntieredslaves",
++ &pdata->ntieredslaves);
++ if (ret) {
++ pr_err("Error: ntieredslaves not found\n");
++ goto err;
++ }
++
++ ret = of_property_read_u32(of_node, "qcom,qos-freq", &pdata->qos_freq);
++ if (ret)
++ pr_debug("qos_freq not available\n");
++
++ ret = of_property_read_string(of_node, "qcom,hw-sel", &sel_str);
++ if (ret) {
++ pr_err("Error: hw_sel not found\n");
++ goto err;
++ } else {
++ ret = get_num(hw_sel_name, sel_str);
++ if (ret < 0)
++ goto err;
++
++ pdata->hw_sel = ret;
++ }
++
++ if (of_property_read_bool(of_node, "qcom,virt"))
++ pdata->virt = true;
++
++ ret = of_property_read_u32(of_node, "qcom,qos-baseoffset",
++ &pdata->qos_baseoffset);
++ if (ret)
++ pr_debug("%s:qos_baseoffset not available\n", __func__);
++
++ ret = of_property_read_u32(of_node, "qcom,qos-delta",
++ &pdata->qos_delta);
++ if (ret)
++ pr_debug("%s:qos_delta not available\n", __func__);
++
++ if (of_property_read_bool(of_node, "qcom,rpm-en"))
++ pdata->rpm_enabled = 1;
++
++ ret = of_property_read_u32(of_node, "qcom,nr-lim-thresh",
++ &temp);
++
++ if (ret) {
++ pr_err("nr-lim threshold not specified");
++ pdata->nr_lim_thresh = 0;
++ } else {
++ pdata->nr_lim_thresh = KBTOB(temp);
++ }
++
++ ret = of_property_read_u32(of_node, "qcom,eff-fact",
++ &pdata->eff_fact);
++ if (ret) {
++ pr_err("Fab eff-factor not present");
++ pdata->eff_fact = 0;
++ }
++
++ pdata->info = get_nodes(of_node, pdev, pdata);
++ return pdata;
++err:
++ return NULL;
++}
++EXPORT_SYMBOL(msm_bus_of_get_fab_data);
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_of_adhoc.c
+@@ -0,0 +1,641 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
++
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/string.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include "msm-bus.h"
++#include "msm-bus-board.h"
++#include "msm_bus_rules.h"
++#include "msm_bus_core.h"
++#include "msm_bus_adhoc.h"
++
++#define DEFAULT_QOS_FREQ 19200
++#define DEFAULT_UTIL_FACT 100
++#define DEFAULT_VRAIL_COMP 100
++
++static int get_qos_mode(struct platform_device *pdev,
++ struct device_node *node, const char *qos_mode)
++{
++ const char *qos_names[] = {"fixed", "limiter", "bypass", "regulator"};
++ int i = 0;
++ int ret = -1;
++
++ if (!qos_mode)
++ goto exit_get_qos_mode;
++
++ for (i = 0; i < ARRAY_SIZE(qos_names); i++) {
++ if (!strcmp(qos_mode, qos_names[i]))
++ break;
++ }
++ if (i == ARRAY_SIZE(qos_names))
++ dev_err(&pdev->dev, "Cannot match mode qos %s using Bypass",
++ qos_mode);
++ else
++ ret = i;
++
++exit_get_qos_mode:
++ return ret;
++}
++
++static int *get_arr(struct platform_device *pdev,
++ struct device_node *node, const char *prop,
++ int *nports)
++{
++ int size = 0, ret;
++ int *arr = NULL;
++
++ if (of_get_property(node, prop, &size)) {
++ *nports = size / sizeof(int);
++ } else {
++ dev_dbg(&pdev->dev, "Property %s not available\n", prop);
++ *nports = 0;
++ return NULL;
++ }
++
++ arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
++ if ((size > 0) && ZERO_OR_NULL_PTR(arr)) {
++ dev_err(&pdev->dev, "Error: Failed to alloc mem for %s\n",
++ prop);
++ return NULL;
++ }
++
++ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
++ if (ret) {
++ dev_err(&pdev->dev, "Error in reading property: %s\n", prop);
++ goto arr_err;
++ }
++
++ return arr;
++arr_err:
++ devm_kfree(&pdev->dev, arr);
++ return NULL;
++}
++
++static struct msm_bus_fab_device_type *get_fab_device_info(
++ struct device_node *dev_node,
++ struct platform_device *pdev)
++{
++ struct msm_bus_fab_device_type *fab_dev;
++ unsigned int ret;
++ struct resource *res;
++ const char *base_name;
++
++ fab_dev = devm_kzalloc(&pdev->dev,
++ sizeof(struct msm_bus_fab_device_type),
++ GFP_KERNEL);
++ if (!fab_dev) {
++ dev_err(&pdev->dev,
++ "Error: Unable to allocate memory for fab_dev\n");
++ return NULL;
++ }
++
++ ret = of_property_read_string(dev_node, "qcom,base-name", &base_name);
++ if (ret) {
++ dev_err(&pdev->dev, "Error: Unable to get base address name\n");
++ goto fab_dev_err;
++ }
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, base_name);
++ if (!res) {
++ dev_err(&pdev->dev, "Error getting qos base addr %s\n",
++ base_name);
++ goto fab_dev_err;
++ }
++ fab_dev->pqos_base = res->start;
++ fab_dev->qos_range = resource_size(res);
++ fab_dev->bypass_qos_prg = of_property_read_bool(dev_node,
++ "qcom,bypass-qos-prg");
++
++ ret = of_property_read_u32(dev_node, "qcom,base-offset",
++ &fab_dev->base_offset);
++ if (ret)
++ dev_dbg(&pdev->dev, "Bus base offset is missing\n");
++
++ ret = of_property_read_u32(dev_node, "qcom,qos-off",
++ &fab_dev->qos_off);
++ if (ret)
++ dev_dbg(&pdev->dev, "Bus qos off is missing\n");
++
++
++ ret = of_property_read_u32(dev_node, "qcom,bus-type",
++ &fab_dev->bus_type);
++ if (ret) {
++ dev_warn(&pdev->dev, "Bus type is missing\n");
++ goto fab_dev_err;
++ }
++
++ ret = of_property_read_u32(dev_node, "qcom,qos-freq",
++ &fab_dev->qos_freq);
++ if (ret) {
++ dev_dbg(&pdev->dev, "Bus qos freq is missing\n");
++ fab_dev->qos_freq = DEFAULT_QOS_FREQ;
++ }
++
++ ret = of_property_read_u32(dev_node, "qcom,util-fact",
++ &fab_dev->util_fact);
++ if (ret) {
++ dev_info(&pdev->dev, "Util-fact is missing, default to %d\n",
++ DEFAULT_UTIL_FACT);
++ fab_dev->util_fact = DEFAULT_UTIL_FACT;
++ }
++
++ ret = of_property_read_u32(dev_node, "qcom,vrail-comp",
++ &fab_dev->vrail_comp);
++ if (ret) {
++ dev_info(&pdev->dev, "Vrail-comp is missing, default to %d\n",
++ DEFAULT_VRAIL_COMP);
++ fab_dev->vrail_comp = DEFAULT_VRAIL_COMP;
++ }
++
++ return fab_dev;
++
++fab_dev_err:
++ devm_kfree(&pdev->dev, fab_dev);
++ fab_dev = 0;
++ return NULL;
++}
++
++static void get_qos_params(
++ struct device_node * const dev_node,
++ struct platform_device * const pdev,
++ struct msm_bus_node_info_type *node_info)
++{
++ const char *qos_mode = NULL;
++ unsigned int ret;
++ unsigned int temp;
++
++ ret = of_property_read_string(dev_node, "qcom,qos-mode", &qos_mode);
++
++ if (ret)
++ node_info->qos_params.mode = -1;
++ else
++ node_info->qos_params.mode = get_qos_mode(pdev, dev_node,
++ qos_mode);
++
++ of_property_read_u32(dev_node, "qcom,prio-lvl",
++ &node_info->qos_params.prio_lvl);
++
++ of_property_read_u32(dev_node, "qcom,prio1",
++ &node_info->qos_params.prio1);
++
++ of_property_read_u32(dev_node, "qcom,prio0",
++ &node_info->qos_params.prio0);
++
++ of_property_read_u32(dev_node, "qcom,prio-rd",
++ &node_info->qos_params.prio_rd);
++
++ of_property_read_u32(dev_node, "qcom,prio-wr",
++ &node_info->qos_params.prio_wr);
++
++ of_property_read_u32(dev_node, "qcom,gp",
++ &node_info->qos_params.gp);
++
++ of_property_read_u32(dev_node, "qcom,thmp",
++ &node_info->qos_params.thmp);
++
++ of_property_read_u32(dev_node, "qcom,ws",
++ &node_info->qos_params.ws);
++
++ ret = of_property_read_u32(dev_node, "qcom,bw_buffer", &temp);
++
++ if (ret)
++ node_info->qos_params.bw_buffer = 0;
++ else
++ node_info->qos_params.bw_buffer = KBTOB(temp);
++
++}
++
++
++static struct msm_bus_node_info_type *get_node_info_data(
++ struct device_node * const dev_node,
++ struct platform_device * const pdev)
++{
++ struct msm_bus_node_info_type *node_info;
++ unsigned int ret;
++ int size;
++ int i;
++ struct device_node *con_node;
++ struct device_node *bus_dev;
++
++ node_info = devm_kzalloc(&pdev->dev,
++ sizeof(struct msm_bus_node_info_type),
++ GFP_KERNEL);
++ if (!node_info) {
++ dev_err(&pdev->dev,
++ "Error: Unable to allocate memory for node_info\n");
++ return NULL;
++ }
++
++ ret = of_property_read_u32(dev_node, "cell-id", &node_info->id);
++ if (ret) {
++ dev_warn(&pdev->dev, "Bus node is missing cell-id\n");
++ goto node_info_err;
++ }
++ ret = of_property_read_string(dev_node, "label", &node_info->name);
++ if (ret) {
++ dev_warn(&pdev->dev, "Bus node is missing name\n");
++ goto node_info_err;
++ }
++ node_info->qport = get_arr(pdev, dev_node, "qcom,qport",
++ &node_info->num_qports);
++
++ if (of_get_property(dev_node, "qcom,connections", &size)) {
++ node_info->num_connections = size / sizeof(int);
++ node_info->connections = devm_kzalloc(&pdev->dev, size,
++ GFP_KERNEL);
++ } else {
++ node_info->num_connections = 0;
++ node_info->connections = 0;
++ }
++
++ for (i = 0; i < node_info->num_connections; i++) {
++ con_node = of_parse_phandle(dev_node, "qcom,connections", i);
++ if (IS_ERR_OR_NULL(con_node))
++ goto node_info_err;
++
++ if (of_property_read_u32(con_node, "cell-id",
++ &node_info->connections[i]))
++ goto node_info_err;
++ of_node_put(con_node);
++ }
++
++ if (of_get_property(dev_node, "qcom,blacklist", &size)) {
++ node_info->num_blist = size/sizeof(u32);
++ node_info->black_listed_connections = devm_kzalloc(&pdev->dev,
++ size, GFP_KERNEL);
++ } else {
++ node_info->num_blist = 0;
++ node_info->black_listed_connections = 0;
++ }
++
++ for (i = 0; i < node_info->num_blist; i++) {
++ con_node = of_parse_phandle(dev_node, "qcom,blacklist", i);
++ if (IS_ERR_OR_NULL(con_node))
++ goto node_info_err;
++
++ if (of_property_read_u32(con_node, "cell-id",
++ &node_info->black_listed_connections[i]))
++ goto node_info_err;
++ of_node_put(con_node);
++ }
++
++ bus_dev = of_parse_phandle(dev_node, "qcom,bus-dev", 0);
++ if (!IS_ERR_OR_NULL(bus_dev)) {
++ if (of_property_read_u32(bus_dev, "cell-id",
++ &node_info->bus_device_id)) {
++ dev_err(&pdev->dev, "Can't find bus device. Node %d",
++ node_info->id);
++ goto node_info_err;
++ }
++
++ of_node_put(bus_dev);
++ } else
++ dev_dbg(&pdev->dev, "Can't find bdev phandle for %d",
++ node_info->id);
++
++ node_info->is_fab_dev = of_property_read_bool(dev_node, "qcom,fab-dev");
++ node_info->virt_dev = of_property_read_bool(dev_node, "qcom,virt-dev");
++
++ ret = of_property_read_u32(dev_node, "qcom,buswidth",
++ &node_info->buswidth);
++ if (ret) {
++ dev_dbg(&pdev->dev, "Using default 8 bytes %d", node_info->id);
++ node_info->buswidth = 8;
++ }
++
++ ret = of_property_read_u32(dev_node, "qcom,mas-rpm-id",
++ &node_info->mas_rpm_id);
++ if (ret) {
++ dev_dbg(&pdev->dev, "mas rpm id is missing\n");
++ node_info->mas_rpm_id = -1;
++ }
++
++ ret = of_property_read_u32(dev_node, "qcom,slv-rpm-id",
++ &node_info->slv_rpm_id);
++ if (ret) {
++ dev_dbg(&pdev->dev, "slv rpm id is missing\n");
++ node_info->slv_rpm_id = -1;
++ }
++ ret = of_property_read_u32(dev_node, "qcom,util-fact",
++ &node_info->util_fact);
++ if (ret)
++ node_info->util_fact = 0;
++ ret = of_property_read_u32(dev_node, "qcom,vrail-comp",
++ &node_info->vrail_comp);
++ if (ret)
++ node_info->vrail_comp = 0;
++ get_qos_params(dev_node, pdev, node_info);
++
++ return node_info;
++
++node_info_err:
++ devm_kfree(&pdev->dev, node_info);
++ node_info = 0;
++ return NULL;
++}
++
++static unsigned int get_bus_node_device_data(
++ struct device_node * const dev_node,
++ struct platform_device * const pdev,
++ struct msm_bus_node_device_type * const node_device)
++{
++ node_device->node_info = get_node_info_data(dev_node, pdev);
++ if (IS_ERR_OR_NULL(node_device->node_info)) {
++ dev_err(&pdev->dev, "Error: Node info missing\n");
++ return -ENODATA;
++ }
++ node_device->ap_owned = of_property_read_bool(dev_node,
++ "qcom,ap-owned");
++
++ if (node_device->node_info->is_fab_dev) {
++ dev_dbg(&pdev->dev, "Dev %d\n", node_device->node_info->id);
++
++ if (!node_device->node_info->virt_dev) {
++ node_device->fabdev =
++ get_fab_device_info(dev_node, pdev);
++ if (IS_ERR_OR_NULL(node_device->fabdev)) {
++ dev_err(&pdev->dev,
++ "Error: Fabric device info missing\n");
++ devm_kfree(&pdev->dev, node_device->node_info);
++ return -ENODATA;
++ }
++ }
++ node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node,
++ "bus_clk");
++
++ if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk))
++ dev_dbg(&pdev->dev,
++ "%s:Failed to get bus clk for bus%d ctx%d",
++ __func__, node_device->node_info->id,
++ DUAL_CTX);
++
++ node_device->clk[ACTIVE_CTX].clk = of_clk_get_by_name(dev_node,
++ "bus_a_clk");
++ if (IS_ERR_OR_NULL(node_device->clk[ACTIVE_CTX].clk))
++ dev_err(&pdev->dev,
++ "Failed to get bus clk for bus%d ctx%d",
++ node_device->node_info->id, ACTIVE_CTX);
++ if (msmbus_coresight_init_adhoc(pdev, dev_node))
++ dev_warn(&pdev->dev,
++ "Coresight support absent for bus: %d\n",
++ node_device->node_info->id);
++ } else {
++ node_device->qos_clk.clk = of_clk_get_by_name(dev_node,
++ "bus_qos_clk");
++
++ if (IS_ERR_OR_NULL(node_device->qos_clk.clk))
++ dev_dbg(&pdev->dev,
++ "%s:Failed to get bus qos clk for mas%d",
++ __func__, node_device->node_info->id);
++
++ node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node,
++ "node_clk");
++
++ if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk))
++ dev_dbg(&pdev->dev,
++ "%s:Failed to get bus clk for bus%d ctx%d",
++ __func__, node_device->node_info->id,
++ DUAL_CTX);
++
++ }
++ return 0;
++}
++
++struct msm_bus_device_node_registration
++ *msm_bus_of_to_pdata(struct platform_device *pdev)
++{
++ struct device_node *of_node, *child_node;
++ struct msm_bus_device_node_registration *pdata;
++ unsigned int i = 0, j;
++ unsigned int ret;
++
++ if (!pdev) {
++ pr_err("Error: Null platform device\n");
++ return NULL;
++ }
++
++ of_node = pdev->dev.of_node;
++
++ pdata = devm_kzalloc(&pdev->dev,
++ sizeof(struct msm_bus_device_node_registration),
++ GFP_KERNEL);
++ if (!pdata) {
++ dev_err(&pdev->dev,
++ "Error: Memory allocation for pdata failed\n");
++ return NULL;
++ }
++
++ pdata->num_devices = of_get_child_count(of_node);
++
++ pdata->info = devm_kzalloc(&pdev->dev,
++ sizeof(struct msm_bus_node_device_type) *
++ pdata->num_devices, GFP_KERNEL);
++
++ if (!pdata->info) {
++ dev_err(&pdev->dev,
++ "Error: Memory allocation for pdata->info failed\n");
++ goto node_reg_err;
++ }
++
++ ret = 0;
++ for_each_child_of_node(of_node, child_node) {
++ ret = get_bus_node_device_data(child_node, pdev,
++ &pdata->info[i]);
++ if (ret) {
++ dev_err(&pdev->dev, "Error: unable to initialize bus nodes\n");
++ goto node_reg_err_1;
++ }
++ i++;
++ }
++
++ dev_dbg(&pdev->dev, "bus topology:\n");
++ for (i = 0; i < pdata->num_devices; i++) {
++ dev_dbg(&pdev->dev, "id %d\nnum_qports %d\nnum_connections %d",
++ pdata->info[i].node_info->id,
++ pdata->info[i].node_info->num_qports,
++ pdata->info[i].node_info->num_connections);
++ dev_dbg(&pdev->dev, "\nbus_device_id %d\n buswidth %d\n",
++ pdata->info[i].node_info->bus_device_id,
++ pdata->info[i].node_info->buswidth);
++ for (j = 0; j < pdata->info[i].node_info->num_connections;
++ j++) {
++ dev_dbg(&pdev->dev, "connection[%d]: %d\n", j,
++ pdata->info[i].node_info->connections[j]);
++ }
++ for (j = 0; j < pdata->info[i].node_info->num_blist;
++ j++) {
++ dev_dbg(&pdev->dev, "black_listed_node[%d]: %d\n", j,
++ pdata->info[i].node_info->
++ black_listed_connections[j]);
++ }
++ if (pdata->info[i].fabdev)
++ dev_dbg(&pdev->dev, "base_addr %zu\nbus_type %d\n",
++ (size_t)pdata->info[i].
++ fabdev->pqos_base,
++ pdata->info[i].fabdev->bus_type);
++ }
++ return pdata;
++
++node_reg_err_1:
++ devm_kfree(&pdev->dev, pdata->info);
++node_reg_err:
++ devm_kfree(&pdev->dev, pdata);
++ pdata = NULL;
++ return NULL;
++}
++
++static int msm_bus_of_get_ids(struct platform_device *pdev,
++ struct device_node *dev_node, int **dev_ids,
++ int *num_ids, char *prop_name)
++{
++ int ret = 0;
++ int size, i;
++ struct device_node *rule_node;
++ int *ids = NULL;
++
++ if (of_get_property(dev_node, prop_name, &size)) {
++ *num_ids = size / sizeof(int);
++ ids = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
++ } else {
++ dev_err(&pdev->dev, "No rule nodes, skipping node");
++ ret = -ENXIO;
++ goto exit_get_ids;
++ }
++
++ *dev_ids = ids;
++ for (i = 0; i < *num_ids; i++) {
++ rule_node = of_parse_phandle(dev_node, prop_name, i);
++ if (IS_ERR_OR_NULL(rule_node)) {
++ dev_err(&pdev->dev, "Can't get rule node id");
++ ret = -ENXIO;
++ goto err_get_ids;
++ }
++
++ if (of_property_read_u32(rule_node, "cell-id",
++ &ids[i])) {
++ dev_err(&pdev->dev, "Can't get rule node id");
++ ret = -ENXIO;
++ goto err_get_ids;
++ }
++ of_node_put(rule_node);
++ }
++exit_get_ids:
++ return ret;
++err_get_ids:
++ devm_kfree(&pdev->dev, ids);
++ of_node_put(rule_node);
++ ids = NULL;
++ return ret;
++}
++
++int msm_bus_of_get_static_rules(struct platform_device *pdev,
++ struct bus_rule_type **static_rules)
++{
++ int ret = 0;
++ struct device_node *of_node, *child_node;
++ int num_rules = 0;
++ int rule_idx = 0;
++ int bw_fld = 0;
++ int i;
++ struct bus_rule_type *static_rule = NULL;
++
++ of_node = pdev->dev.of_node;
++ num_rules = of_get_child_count(of_node);
++ static_rule = devm_kzalloc(&pdev->dev,
++ sizeof(struct bus_rule_type) * num_rules,
++ GFP_KERNEL);
++
++ if (IS_ERR_OR_NULL(static_rule)) {
++ ret = -ENOMEM;
++ goto exit_static_rules;
++ }
++
++ *static_rules = static_rule;
++ for_each_child_of_node(of_node, child_node) {
++ ret = msm_bus_of_get_ids(pdev, child_node,
++ &static_rule[rule_idx].src_id,
++ &static_rule[rule_idx].num_src,
++ "qcom,src-nodes");
++
++ ret = msm_bus_of_get_ids(pdev, child_node,
++ &static_rule[rule_idx].dst_node,
++ &static_rule[rule_idx].num_dst,
++ "qcom,dest-node");
++
++ ret = of_property_read_u32(child_node, "qcom,src-field",
++ &static_rule[rule_idx].src_field);
++ if (ret) {
++ dev_err(&pdev->dev, "src-field missing");
++ ret = -ENXIO;
++ goto err_static_rules;
++ }
++
++ ret = of_property_read_u32(child_node, "qcom,src-op",
++ &static_rule[rule_idx].op);
++ if (ret) {
++ dev_err(&pdev->dev, "src-op missing");
++ ret = -ENXIO;
++ goto err_static_rules;
++ }
++
++ ret = of_property_read_u32(child_node, "qcom,mode",
++ &static_rule[rule_idx].mode);
++ if (ret) {
++ dev_err(&pdev->dev, "mode missing");
++ ret = -ENXIO;
++ goto err_static_rules;
++ }
++
++ ret = of_property_read_u32(child_node, "qcom,thresh", &bw_fld);
++ if (ret) {
++ dev_err(&pdev->dev, "thresh missing");
++ ret = -ENXIO;
++ goto err_static_rules;
++ } else
++ static_rule[rule_idx].thresh = KBTOB(bw_fld);
++
++ ret = of_property_read_u32(child_node, "qcom,dest-bw",
++ &bw_fld);
++ if (ret)
++ static_rule[rule_idx].dst_bw = 0;
++ else
++ static_rule[rule_idx].dst_bw = KBTOB(bw_fld);
++
++ rule_idx++;
++ }
++ ret = rule_idx;
++exit_static_rules:
++ return ret;
++err_static_rules:
++ for (i = 0; i < num_rules; i++) {
++ if (!IS_ERR_OR_NULL(static_rule)) {
++ if (!IS_ERR_OR_NULL(static_rule[i].src_id))
++ devm_kfree(&pdev->dev,
++ static_rule[i].src_id);
++ if (!IS_ERR_OR_NULL(static_rule[i].dst_node))
++ devm_kfree(&pdev->dev,
++ static_rule[i].dst_node);
++ devm_kfree(&pdev->dev, static_rule);
++ }
++ }
++ devm_kfree(&pdev->dev, *static_rules);
++ static_rules = NULL;
++ return ret;
++}
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_rules.c
+@@ -0,0 +1,624 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/list_sort.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include "msm-bus-board.h"
++#include "msm_bus_rules.h"
++#include <trace/events/trace_msm_bus.h>
++
++struct node_vote_info {
++ int id;
++ u64 ib;
++ u64 ab;
++ u64 clk;
++};
++
++struct rules_def {
++ int rule_id;
++ int num_src;
++ int state;
++ struct node_vote_info *src_info;
++ struct bus_rule_type rule_ops;
++ bool state_change;
++ struct list_head link;
++};
++
++struct rule_node_info {
++ int id;
++ void *data;
++ struct raw_notifier_head rule_notify_list;
++ int cur_rule;
++ int num_rules;
++ struct list_head node_rules;
++ struct list_head link;
++ struct rule_apply_rcm_info apply;
++};
++
++DEFINE_MUTEX(msm_bus_rules_lock);
++static LIST_HEAD(node_list);
++static struct rule_node_info *get_node(u32 id, void *data);
++
++#define LE(op1, op2) (op1 <= op2)
++#define LT(op1, op2) (op1 < op2)
++#define GE(op1, op2) (op1 >= op2)
++#define GT(op1, op2) (op1 > op2)
++#define NB_ID (0x201)
++
++static struct rule_node_info *get_node(u32 id, void *data)
++{
++ struct rule_node_info *node_it = NULL;
++ struct rule_node_info *node_match = NULL;
++
++ list_for_each_entry(node_it, &node_list, link) {
++ if (node_it->id == id) {
++ if ((id == NB_ID)) {
++ if ((node_it->data == data)) {
++ node_match = node_it;
++ break;
++ }
++ } else {
++ node_match = node_it;
++ break;
++ }
++ }
++ }
++ return node_match;
++}
++
++static struct rule_node_info *gen_node(u32 id, void *data)
++{
++ struct rule_node_info *node_it = NULL;
++ struct rule_node_info *node_match = NULL;
++
++ list_for_each_entry(node_it, &node_list, link) {
++ if (node_it->id == id) {
++ node_match = node_it;
++ break;
++ }
++ }
++
++ if (!node_match) {
++ node_match = kzalloc(sizeof(struct rule_node_info), GFP_KERNEL);
++ if (!node_match) {
++ pr_err("%s: Cannot allocate memory", __func__);
++ goto exit_node_match;
++ }
++
++ node_match->id = id;
++ node_match->cur_rule = -1;
++ node_match->num_rules = 0;
++ node_match->data = data;
++ list_add_tail(&node_match->link, &node_list);
++ INIT_LIST_HEAD(&node_match->node_rules);
++ RAW_INIT_NOTIFIER_HEAD(&node_match->rule_notify_list);
++ pr_debug("Added new node %d to list\n", id);
++ }
++exit_node_match:
++ return node_match;
++}
++
++static bool do_compare_op(u64 op1, u64 op2, int op)
++{
++ bool ret = false;
++
++ switch (op) {
++ case OP_LE:
++ ret = LE(op1, op2);
++ break;
++ case OP_LT:
++ ret = LT(op1, op2);
++ break;
++ case OP_GT:
++ ret = GT(op1, op2);
++ break;
++ case OP_GE:
++ ret = GE(op1, op2);
++ break;
++ case OP_NOOP:
++ ret = true;
++ break;
++ default:
++ pr_info("Invalid OP %d", op);
++ break;
++ }
++ return ret;
++}
++
++static void update_src_id_vote(struct rule_update_path_info *inp_node,
++ struct rule_node_info *rule_node)
++{
++ struct rules_def *rule;
++ int i;
++
++ list_for_each_entry(rule, &rule_node->node_rules, link) {
++ for (i = 0; i < rule->num_src; i++) {
++ if (rule->src_info[i].id == inp_node->id) {
++ rule->src_info[i].ib = inp_node->ib;
++ rule->src_info[i].ab = inp_node->ab;
++ rule->src_info[i].clk = inp_node->clk;
++ }
++ }
++ }
++}
++
++static u64 get_field(struct rules_def *rule, int src_id)
++{
++ u64 field = 0;
++ int i;
++
++ for (i = 0; i < rule->num_src; i++) {
++ switch (rule->rule_ops.src_field) {
++ case FLD_IB:
++ field += rule->src_info[i].ib;
++ break;
++ case FLD_AB:
++ field += rule->src_info[i].ab;
++ break;
++ case FLD_CLK:
++ field += rule->src_info[i].clk;
++ break;
++ }
++ }
++
++ return field;
++}
++
++static bool check_rule(struct rules_def *rule,
++ struct rule_update_path_info *inp)
++{
++ bool ret = false;
++
++ if (!rule)
++ return ret;
++
++ switch (rule->rule_ops.op) {
++ case OP_LE:
++ case OP_LT:
++ case OP_GT:
++ case OP_GE:
++ {
++ u64 src_field = get_field(rule, inp->id);
++ if (!src_field)
++ ret = false;
++ else
++ ret = do_compare_op(src_field, rule->rule_ops.thresh,
++ rule->rule_ops.op);
++ break;
++ }
++ default:
++ pr_err("Unsupported op %d", rule->rule_ops.op);
++ break;
++ }
++ return ret;
++}
++
++static void match_rule(struct rule_update_path_info *inp_node,
++ struct rule_node_info *node)
++{
++ struct rules_def *rule;
++ int i;
++
++ list_for_each_entry(rule, &node->node_rules, link) {
++ for (i = 0; i < rule->num_src; i++) {
++ if (rule->src_info[i].id == inp_node->id) {
++ if (check_rule(rule, inp_node)) {
++ trace_bus_rules_matches(node->cur_rule,
++ inp_node->id, inp_node->ab,
++ inp_node->ib, inp_node->clk);
++ if (rule->state ==
++ RULE_STATE_NOT_APPLIED)
++ rule->state_change = true;
++ rule->state = RULE_STATE_APPLIED;
++ } else {
++ if (rule->state ==
++ RULE_STATE_APPLIED)
++ rule->state_change = true;
++ rule->state = RULE_STATE_NOT_APPLIED;
++ }
++ }
++ }
++ }
++}
++
++static void apply_rule(struct rule_node_info *node,
++ struct list_head *output_list)
++{
++ struct rules_def *rule;
++
++ node->cur_rule = -1;
++ list_for_each_entry(rule, &node->node_rules, link) {
++ if ((rule->state == RULE_STATE_APPLIED) &&
++ (node->cur_rule == -1))
++ node->cur_rule = rule->rule_id;
++
++ if (node->id == NB_ID) {
++ if (rule->state_change) {
++ rule->state_change = false;
++ raw_notifier_call_chain(&node->rule_notify_list,
++ rule->state, (void *)&rule->rule_ops);
++ }
++ } else {
++ if ((rule->state == RULE_STATE_APPLIED) &&
++ (node->cur_rule == rule->rule_id)) {
++ node->apply.id = rule->rule_ops.dst_node[0];
++ node->apply.throttle = rule->rule_ops.mode;
++ node->apply.lim_bw = rule->rule_ops.dst_bw;
++ list_add_tail(&node->apply.link, output_list);
++ }
++ rule->state_change = false;
++ }
++ }
++
++}
++
++int msm_rules_update_path(struct list_head *input_list,
++ struct list_head *output_list)
++{
++ int ret = 0;
++ struct rule_update_path_info *inp_node;
++ struct rule_node_info *node_it = NULL;
++
++ mutex_lock(&msm_bus_rules_lock);
++ list_for_each_entry(inp_node, input_list, link) {
++ list_for_each_entry(node_it, &node_list, link) {
++ update_src_id_vote(inp_node, node_it);
++ match_rule(inp_node, node_it);
++ }
++ }
++
++ list_for_each_entry(node_it, &node_list, link)
++ apply_rule(node_it, output_list);
++
++ mutex_unlock(&msm_bus_rules_lock);
++ return ret;
++}
++
++static bool ops_equal(int op1, int op2)
++{
++ bool ret = false;
++
++ switch (op1) {
++ case OP_GT:
++ case OP_GE:
++ case OP_LT:
++ case OP_LE:
++ if (abs(op1 - op2) <= 1)
++ ret = true;
++ break;
++ default:
++ ret = (op1 == op2);
++ }
++
++ return ret;
++}
++
++static int node_rules_compare(void *priv, struct list_head *a,
++ struct list_head *b)
++{
++ struct rules_def *ra = container_of(a, struct rules_def, link);
++ struct rules_def *rb = container_of(b, struct rules_def, link);
++ int ret = -1;
++ int64_t th_diff = 0;
++
++
++ if (ra->rule_ops.mode == rb->rule_ops.mode) {
++ if (ops_equal(ra->rule_ops.op, rb->rule_ops.op)) {
++ if ((ra->rule_ops.op == OP_LT) ||
++ (ra->rule_ops.op == OP_LE)) {
++ th_diff = ra->rule_ops.thresh -
++ rb->rule_ops.thresh;
++ if (th_diff > 0)
++ ret = 1;
++ else
++ ret = -1;
++ } else if ((ra->rule_ops.op == OP_GT) ||
++ (ra->rule_ops.op == OP_GE)) {
++ th_diff = rb->rule_ops.thresh -
++ ra->rule_ops.thresh;
++ if (th_diff > 0)
++ ret = 1;
++ else
++ ret = -1;
++ }
++ } else
++ ret = ra->rule_ops.op - rb->rule_ops.op;
++ } else if ((ra->rule_ops.mode == THROTTLE_OFF) &&
++ (rb->rule_ops.mode == THROTTLE_ON)) {
++ ret = 1;
++ } else if ((ra->rule_ops.mode == THROTTLE_ON) &&
++ (rb->rule_ops.mode == THROTTLE_OFF)) {
++ ret = -1;
++ }
++
++ return ret;
++}
++
++static void print_rules(struct rule_node_info *node_it)
++{
++ struct rules_def *node_rule = NULL;
++ int i;
++
++ if (!node_it) {
++ pr_err("%s: no node for found", __func__);
++ return;
++ }
++
++ pr_info("\n Now printing rules for Node %d cur rule %d\n",
++ node_it->id, node_it->cur_rule);
++ list_for_each_entry(node_rule, &node_it->node_rules, link) {
++ pr_info("\n num Rules %d rule Id %d\n",
++ node_it->num_rules, node_rule->rule_id);
++ pr_info("Rule: src_field %d\n", node_rule->rule_ops.src_field);
++ for (i = 0; i < node_rule->rule_ops.num_src; i++)
++ pr_info("Rule: src %d\n",
++ node_rule->rule_ops.src_id[i]);
++ for (i = 0; i < node_rule->rule_ops.num_dst; i++)
++ pr_info("Rule: dst %d dst_bw %llu\n",
++ node_rule->rule_ops.dst_node[i],
++ node_rule->rule_ops.dst_bw);
++ pr_info("Rule: thresh %llu op %d mode %d State %d\n",
++ node_rule->rule_ops.thresh,
++ node_rule->rule_ops.op,
++ node_rule->rule_ops.mode,
++ node_rule->state);
++ }
++}
++
++void print_all_rules(void)
++{
++ struct rule_node_info *node_it = NULL;
++
++ list_for_each_entry(node_it, &node_list, link)
++ print_rules(node_it);
++}
++
++void print_rules_buf(char *buf, int max_buf)
++{
++ struct rule_node_info *node_it = NULL;
++ struct rules_def *node_rule = NULL;
++ int i;
++ int cnt = 0;
++
++ list_for_each_entry(node_it, &node_list, link) {
++ cnt += scnprintf(buf + cnt, max_buf - cnt,
++ "\n Now printing rules for Node %d cur_rule %d\n",
++ node_it->id, node_it->cur_rule);
++ list_for_each_entry(node_rule, &node_it->node_rules, link) {
++ cnt += scnprintf(buf + cnt, max_buf - cnt,
++ "\nNum Rules:%d ruleId %d STATE:%d change:%d\n",
++ node_it->num_rules, node_rule->rule_id,
++ node_rule->state, node_rule->state_change);
++ cnt += scnprintf(buf + cnt, max_buf - cnt,
++ "Src_field %d\n",
++ node_rule->rule_ops.src_field);
++ for (i = 0; i < node_rule->rule_ops.num_src; i++)
++ cnt += scnprintf(buf + cnt, max_buf - cnt,
++ "Src %d Cur Ib %llu Ab %llu\n",
++ node_rule->rule_ops.src_id[i],
++ node_rule->src_info[i].ib,
++ node_rule->src_info[i].ab);
++ for (i = 0; i < node_rule->rule_ops.num_dst; i++)
++ cnt += scnprintf(buf + cnt, max_buf - cnt,
++ "Dst %d dst_bw %llu\n",
++ node_rule->rule_ops.dst_node[0],
++ node_rule->rule_ops.dst_bw);
++ cnt += scnprintf(buf + cnt, max_buf - cnt,
++ "Thresh %llu op %d mode %d\n",
++ node_rule->rule_ops.thresh,
++ node_rule->rule_ops.op,
++ node_rule->rule_ops.mode);
++ }
++ }
++}
++
++static int copy_rule(struct bus_rule_type *src, struct rules_def *node_rule,
++ struct notifier_block *nb)
++{
++ int i;
++ int ret = 0;
++
++ memcpy(&node_rule->rule_ops, src,
++ sizeof(struct bus_rule_type));
++ node_rule->rule_ops.src_id = kzalloc(
++ (sizeof(int) * node_rule->rule_ops.num_src),
++ GFP_KERNEL);
++ if (!node_rule->rule_ops.src_id) {
++ pr_err("%s:Failed to allocate for src_id",
++ __func__);
++ return -ENOMEM;
++ }
++ memcpy(node_rule->rule_ops.src_id, src->src_id,
++ sizeof(int) * src->num_src);
++
++
++ if (!nb) {
++ node_rule->rule_ops.dst_node = kzalloc(
++ (sizeof(int) * node_rule->rule_ops.num_dst),
++ GFP_KERNEL);
++ if (!node_rule->rule_ops.dst_node) {
++ pr_err("%s:Failed to allocate for src_id",
++ __func__);
++ return -ENOMEM;
++ }
++ memcpy(node_rule->rule_ops.dst_node, src->dst_node,
++ sizeof(int) * src->num_dst);
++ }
++
++ node_rule->num_src = src->num_src;
++ node_rule->src_info = kzalloc(
++ (sizeof(struct node_vote_info) * node_rule->rule_ops.num_src),
++ GFP_KERNEL);
++ if (!node_rule->src_info) {
++ pr_err("%s:Failed to allocate for src_id",
++ __func__);
++ return -ENOMEM;
++ }
++ for (i = 0; i < src->num_src; i++)
++ node_rule->src_info[i].id = src->src_id[i];
++
++ return ret;
++}
++
++void msm_rule_register(int num_rules, struct bus_rule_type *rule,
++ struct notifier_block *nb)
++{
++ struct rule_node_info *node = NULL;
++ int i, j;
++ struct rules_def *node_rule = NULL;
++ int num_dst = 0;
++
++ if (!rule)
++ return;
++
++ mutex_lock(&msm_bus_rules_lock);
++ for (i = 0; i < num_rules; i++) {
++ if (nb)
++ num_dst = 1;
++ else
++ num_dst = rule[i].num_dst;
++
++ for (j = 0; j < num_dst; j++) {
++ int id = 0;
++
++ if (nb)
++ id = NB_ID;
++ else
++ id = rule[i].dst_node[j];
++
++ node = gen_node(id, nb);
++ if (!node) {
++ pr_info("Error getting rule");
++ goto exit_rule_register;
++ }
++ node_rule = kzalloc(sizeof(struct rules_def),
++ GFP_KERNEL);
++ if (!node_rule) {
++ pr_err("%s: Failed to allocate for rule",
++ __func__);
++ goto exit_rule_register;
++ }
++
++ if (copy_rule(&rule[i], node_rule, nb)) {
++ pr_err("Error copying rule");
++ goto exit_rule_register;
++ }
++
++ node_rule->rule_id = node->num_rules++;
++ if (nb)
++ node->data = nb;
++
++ list_add_tail(&node_rule->link, &node->node_rules);
++ }
++ }
++ list_sort(NULL, &node->node_rules, node_rules_compare);
++
++ if (nb)
++ raw_notifier_chain_register(&node->rule_notify_list, nb);
++exit_rule_register:
++ mutex_unlock(&msm_bus_rules_lock);
++ return;
++}
++
++static int comp_rules(struct bus_rule_type *rulea, struct bus_rule_type *ruleb)
++{
++ int ret = 1;
++
++ if (rulea->num_src == ruleb->num_src)
++ ret = memcmp(rulea->src_id, ruleb->src_id,
++ (sizeof(int) * rulea->num_src));
++ if (!ret && (rulea->num_dst == ruleb->num_dst))
++ ret = memcmp(rulea->dst_node, ruleb->dst_node,
++ (sizeof(int) * rulea->num_dst));
++ if (!ret && (rulea->dst_bw == ruleb->dst_bw) &&
++ (rulea->op == ruleb->op) && (rulea->thresh == ruleb->thresh))
++ ret = 0;
++
++ return ret;
++}
++
++void msm_rule_unregister(int num_rules, struct bus_rule_type *rule,
++ struct notifier_block *nb)
++{
++ int i;
++ struct rule_node_info *node = NULL;
++ struct rule_node_info *node_tmp = NULL;
++ struct rules_def *node_rule;
++ struct rules_def *node_rule_tmp;
++ bool match_found = false;
++
++ if (!rule)
++ return;
++
++ mutex_lock(&msm_bus_rules_lock);
++ if (nb) {
++ node = get_node(NB_ID, nb);
++ if (!node) {
++ pr_err("%s: Can't find node", __func__);
++ goto exit_unregister_rule;
++ }
++
++ list_for_each_entry_safe(node_rule, node_rule_tmp,
++ &node->node_rules, link) {
++ list_del(&node_rule->link);
++ kfree(node_rule);
++ node->num_rules--;
++ }
++ raw_notifier_chain_unregister(&node->rule_notify_list, nb);
++ } else {
++ for (i = 0; i < num_rules; i++) {
++ match_found = false;
++
++ list_for_each_entry(node, &node_list, link) {
++ list_for_each_entry_safe(node_rule,
++ node_rule_tmp, &node->node_rules, link) {
++ if (comp_rules(&node_rule->rule_ops,
++ &rule[i]) == 0) {
++ list_del(&node_rule->link);
++ kfree(node_rule);
++ match_found = true;
++ node->num_rules--;
++ list_sort(NULL,
++ &node->node_rules,
++ node_rules_compare);
++ break;
++ }
++ }
++ }
++ }
++ }
++
++ list_for_each_entry_safe(node, node_tmp,
++ &node_list, link) {
++ if (!node->num_rules) {
++ pr_debug("Deleting Rule node %d", node->id);
++ list_del(&node->link);
++ kfree(node);
++ }
++ }
++exit_unregister_rule:
++ mutex_unlock(&msm_bus_rules_lock);
++}
++
++bool msm_rule_are_rules_registered(void)
++{
++ bool ret = false;
++
++ if (list_empty(&node_list))
++ ret = false;
++ else
++ ret = true;
++
++ return ret;
++}
++
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_bus_rules.h
+@@ -0,0 +1,77 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _ARCH_ARM_MACH_MSM_BUS_RULES_H
++#define _ARCH_ARM_MACH_MSM_BUS_RULES_H
++
++#include <linux/types.h>
++#include <linux/list.h>
++#include <linux/notifier.h>
++#include <dt-bindings/msm/msm-bus-rule-ops.h>
++
++#define MAX_NODES (5)
++
++struct rule_update_path_info {
++ u32 id;
++ u64 ab;
++ u64 ib;
++ u64 clk;
++ struct list_head link;
++};
++
++struct rule_apply_rcm_info {
++ u32 id;
++ u64 lim_bw;
++ int throttle;
++ bool after_clk_commit;
++ struct list_head link;
++};
++
++struct bus_rule_type {
++ int num_src;
++ int *src_id;
++ int src_field;
++ int op;
++ u64 thresh;
++ int num_dst;
++ int *dst_node;
++ u64 dst_bw;
++ int mode;
++ void *client_data;
++};
++
++#if (defined(CONFIG_BUS_TOPOLOGY_ADHOC))
++void msm_rule_register(int num_rules, struct bus_rule_type *rule,
++ struct notifier_block *nb);
++void msm_rule_unregister(int num_rules, struct bus_rule_type *rule,
++ struct notifier_block *nb);
++void print_rules_buf(char *buf, int count);
++bool msm_rule_are_rules_registered(void);
++#else
++static inline void msm_rule_register(int num_rules, struct bus_rule_type *rule,
++ struct notifier_block *nb)
++{
++}
++static inline void msm_rule_unregister(int num_rules,
++ struct bus_rule_type *rule,
++ struct notifier_block *nb)
++{
++}
++static inline void print_rules_buf(char *buf, int count)
++{
++}
++static inline bool msm_rule_are_rules_registered(void)
++{
++ return false;
++}
++#endif /* defined(CONFIG_BUS_TOPOLOGY_ADHOC) */
++#endif /* _ARCH_ARM_MACH_MSM_BUS_RULES_H */
+--- /dev/null
++++ b/drivers/bus/msm_bus/msm_buspm_coresight_adhoc.c
+@@ -0,0 +1,189 @@
++/* Copyright (c) 2014 The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/uaccess.h>
++#include <linux/miscdevice.h>
++#include <linux/of_coresight.h>
++#include <linux/coresight.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/list.h>
++
++struct msmbus_coresight_adhoc_clock_drvdata {
++ int id;
++ struct clk *clk;
++ struct list_head list;
++};
++
++struct msmbus_coresight_adhoc_drvdata {
++ struct device *dev;
++ struct coresight_device *csdev;
++ struct coresight_desc *desc;
++ struct list_head clocks;
++};
++
++static int msmbus_coresight_enable_adhoc(struct coresight_device *csdev)
++{
++ struct msmbus_coresight_adhoc_clock_drvdata *clk;
++ struct msmbus_coresight_adhoc_drvdata *drvdata =
++ dev_get_drvdata(csdev->dev.parent);
++ long rate;
++
++ list_for_each_entry(clk, &drvdata->clocks, list) {
++ if (clk->id == csdev->id) {
++ rate = clk_round_rate(clk->clk, 1L);
++ clk_set_rate(clk->clk, rate);
++ return clk_prepare_enable(clk->clk);
++ }
++ }
++
++ return -ENOENT;
++}
++
++static void msmbus_coresight_disable_adhoc(struct coresight_device *csdev)
++{
++ struct msmbus_coresight_adhoc_clock_drvdata *clk;
++ struct msmbus_coresight_adhoc_drvdata *drvdata =
++ dev_get_drvdata(csdev->dev.parent);
++
++ list_for_each_entry(clk, &drvdata->clocks, list) {
++ if (clk->id == csdev->id)
++ clk_disable_unprepare(clk->clk);
++ }
++}
++
++static const struct coresight_ops_source msmbus_coresight_adhoc_source_ops = {
++ .enable = msmbus_coresight_enable_adhoc,
++ .disable = msmbus_coresight_disable_adhoc,
++};
++
++static const struct coresight_ops msmbus_coresight_cs_ops = {
++ .source_ops = &msmbus_coresight_adhoc_source_ops,
++};
++
++void msmbus_coresight_remove_adhoc(struct platform_device *pdev)
++{
++ struct msmbus_coresight_adhoc_clock_drvdata *clk, *next_clk;
++ struct msmbus_coresight_adhoc_drvdata *drvdata =
++ platform_get_drvdata(pdev);
++
++ msmbus_coresight_disable_adhoc(drvdata->csdev);
++ coresight_unregister(drvdata->csdev);
++ list_for_each_entry_safe(clk, next_clk, &drvdata->clocks, list) {
++ list_del(&clk->list);
++ devm_kfree(&pdev->dev, clk);
++ }
++ devm_kfree(&pdev->dev, drvdata->desc);
++ devm_kfree(&pdev->dev, drvdata);
++ platform_set_drvdata(pdev, NULL);
++}
++EXPORT_SYMBOL(msmbus_coresight_remove_adhoc);
++
++static int buspm_of_get_clk_adhoc(struct device_node *of_node,
++ struct msmbus_coresight_adhoc_drvdata *drvdata, int id)
++{
++ struct msmbus_coresight_adhoc_clock_drvdata *clk;
++ clk = devm_kzalloc(drvdata->dev, sizeof(*clk), GFP_KERNEL);
++
++ if (!clk)
++ return -ENOMEM;
++
++ clk->id = id;
++
++ clk->clk = of_clk_get_by_name(of_node, "bus_clk");
++ if (IS_ERR(clk->clk)) {
++ pr_err("Error: unable to get clock for coresight node %d\n",
++ id);
++ goto err;
++ }
++
++ list_add(&clk->list, &drvdata->clocks);
++ return 0;
++
++err:
++ devm_kfree(drvdata->dev, clk);
++ return -EINVAL;
++}
++
++int msmbus_coresight_init_adhoc(struct platform_device *pdev,
++ struct device_node *of_node)
++{
++ int ret;
++ struct device *dev = &pdev->dev;
++ struct coresight_platform_data *pdata;
++ struct msmbus_coresight_adhoc_drvdata *drvdata;
++ struct coresight_desc *desc;
++
++ pdata = of_get_coresight_platform_data(dev, of_node);
++ if (IS_ERR(pdata))
++ return PTR_ERR(pdata);
++
++ drvdata = platform_get_drvdata(pdev);
++ if (IS_ERR_OR_NULL(drvdata)) {
++ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
++ if (!drvdata) {
++ pr_err("coresight: Alloc for drvdata failed\n");
++ return -ENOMEM;
++ }
++ INIT_LIST_HEAD(&drvdata->clocks);
++ drvdata->dev = &pdev->dev;
++ platform_set_drvdata(pdev, drvdata);
++ }
++ ret = buspm_of_get_clk_adhoc(of_node, drvdata, pdata->id);
++ if (ret) {
++ pr_err("Error getting clocks\n");
++ ret = -ENXIO;
++ goto err1;
++ }
++
++ desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
++ if (!desc) {
++ pr_err("coresight: Error allocating memory\n");
++ ret = -ENOMEM;
++ goto err1;
++ }
++
++ desc->type = CORESIGHT_DEV_TYPE_SOURCE;
++ desc->subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_BUS;
++ desc->ops = &msmbus_coresight_cs_ops;
++ desc->pdata = pdata;
++ desc->dev = &pdev->dev;
++ desc->owner = THIS_MODULE;
++ drvdata->desc = desc;
++ drvdata->csdev = coresight_register(desc);
++ if (IS_ERR(drvdata->csdev)) {
++ pr_err("coresight: Coresight register failed\n");
++ ret = PTR_ERR(drvdata->csdev);
++ goto err0;
++ }
++
++ dev_info(dev, "msmbus_coresight initialized\n");
++
++ return 0;
++err0:
++ devm_kfree(dev, desc);
++err1:
++ devm_kfree(dev, drvdata);
++ platform_set_drvdata(pdev, NULL);
++ return ret;
++}
++EXPORT_SYMBOL(msmbus_coresight_init_adhoc);
++
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("MSM BusPM Adhoc CoreSight Driver");
+--- /dev/null
++++ b/drivers/bus/msm_bus/rpm-smd.h
+@@ -0,0 +1,268 @@
++/* Copyright (c) 2012, 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#ifndef __ARCH_ARM_MACH_MSM_RPM_SMD_H
++#define __ARCH_ARM_MACH_MSM_RPM_SMD_H
++
++/**
++ * enum msm_rpm_set - RPM enumerations for sleep/active set
++ * %MSM_RPM_CTX_SET_0: Set resource parameters for active mode.
++ * %MSM_RPM_CTX_SET_SLEEP: Set resource parameters for sleep.
++ */
++enum msm_rpm_set {
++ MSM_RPM_CTX_ACTIVE_SET,
++ MSM_RPM_CTX_SLEEP_SET,
++};
++
++struct msm_rpm_request;
++
++struct msm_rpm_kvp {
++ uint32_t key;
++ uint32_t length;
++ uint8_t *data;
++};
++#ifdef CONFIG_MSM_RPM_SMD
++/**
++ * msm_rpm_request() - Creates a parent element to identify the
++ * resource on the RPM, that stores the KVPs for different fields modified
++ * for a hardware resource
++ *
++ * @set: if the device is setting the active/sleep set parameter
++ * for the resource
++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
++ * @num_elements: number of KVPs pairs associated with the resource
++ *
++ * returns pointer to a msm_rpm_request on success, NULL on error
++ */
++struct msm_rpm_request *msm_rpm_create_request(
++ enum msm_rpm_set set, uint32_t rsc_type,
++ uint32_t rsc_id, int num_elements);
++
++/**
++ * msm_rpm_request_noirq() - Creates a parent element to identify the
++ * resource on the RPM, that stores the KVPs for different fields modified
++ * for a hardware resource. This function is similar to msm_rpm_create_request
++ * except that it has to be called with interrupts masked.
++ *
++ * @set: if the device is setting the active/sleep set parameter
++ * for the resource
++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
++ * @num_elements: number of KVPs pairs associated with the resource
++ *
++ * returns pointer to a msm_rpm_request on success, NULL on error
++ */
++struct msm_rpm_request *msm_rpm_create_request_noirq(
++ enum msm_rpm_set set, uint32_t rsc_type,
++ uint32_t rsc_id, int num_elements);
++
++/**
++ * msm_rpm_add_kvp_data() - Adds a Key value pair to a existing RPM resource.
++ *
++ * @handle: RPM resource handle to which the data should be appended
++ * @key: unsigned integer identify the parameter modified
++ * @data: byte array that contains the value corresponding to key.
++ * @size: size of data in bytes.
++ *
++ * returns 0 on success or errno
++ */
++int msm_rpm_add_kvp_data(struct msm_rpm_request *handle,
++ uint32_t key, const uint8_t *data, int size);
++
++/**
++ * msm_rpm_add_kvp_data_noirq() - Adds a Key value pair to a existing RPM
++ * resource. This function is similar to msm_rpm_add_kvp_data except that it
++ * has to be called with interrupts masked.
++ *
++ * @handle: RPM resource handle to which the data should be appended
++ * @key: unsigned integer identify the parameter modified
++ * @data: byte array that contains the value corresponding to key.
++ * @size: size of data in bytes.
++ *
++ * returns 0 on success or errno
++ */
++int msm_rpm_add_kvp_data_noirq(struct msm_rpm_request *handle,
++ uint32_t key, const uint8_t *data, int size);
++
++/** msm_rpm_free_request() - clean up the RPM request handle created with
++ * msm_rpm_create_request
++ *
++ * @handle: RPM resource handle to be cleared.
++ */
++
++void msm_rpm_free_request(struct msm_rpm_request *handle);
++
++/**
++ * msm_rpm_send_request() - Send the RPM messages using SMD. The function
++ * assigns a message id before sending the data out to the RPM. RPM hardware
++ * uses the message id to acknowledge the messages.
++ *
++ * @handle: pointer to the msm_rpm_request for the resource being modified.
++ *
++ * returns non-zero message id on success and zero on a failed transaction.
++ * The drivers use message id to wait for ACK from RPM.
++ */
++int msm_rpm_send_request(struct msm_rpm_request *handle);
++
++/**
++ * msm_rpm_send_request_noirq() - Send the RPM messages using SMD. The
++ * function assigns a message id before sending the data out to the RPM.
++ * RPM hardware uses the message id to acknowledge the messages. This function
++ * is similar to msm_rpm_send_request except that it has to be called with
++ * interrupts masked.
++ *
++ * @handle: pointer to the msm_rpm_request for the resource being modified.
++ *
++ * returns non-zero message id on success and zero on a failed transaction.
++ * The drivers use message id to wait for ACK from RPM.
++ */
++int msm_rpm_send_request_noirq(struct msm_rpm_request *handle);
++
++/**
++ * msm_rpm_wait_for_ack() - A blocking call that waits for acknowledgment of
++ * a message from RPM.
++ *
++ * @msg_id: the return from msm_rpm_send_requests
++ *
++ * returns 0 on success or errno
++ */
++int msm_rpm_wait_for_ack(uint32_t msg_id);
++
++/**
++ * msm_rpm_wait_for_ack_noirq() - A blocking call that waits for acknowledgment
++ * of a message from RPM. This function is similar to msm_rpm_wait_for_ack
++ * except that it has to be called with interrupts masked.
++ *
++ * @msg_id: the return from msm_rpm_send_request
++ *
++ * returns 0 on success or errno
++ */
++int msm_rpm_wait_for_ack_noirq(uint32_t msg_id);
++
++/**
++ * msm_rpm_send_message() -Wrapper function for clients to send data given an
++ * array of key value pairs.
++ *
++ * @set: if the device is setting the active/sleep set parameter
++ * for the resource
++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
++ * @kvp: array of KVP data.
++ * @nelem: number of KVPs pairs associated with the message.
++ *
++ * returns 0 on success and errno on failure.
++ */
++int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type,
++ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems);
++
++/**
++ * msm_rpm_send_message_noirq() -Wrapper function for clients to send data
++ * given an array of key value pairs. This function is similar to the
++ * msm_rpm_send_message() except that it has to be called with interrupts
++ * disabled. Clients should choose the irq version when possible for system
++ * performance.
++ *
++ * @set: if the device is setting the active/sleep set parameter
++ * for the resource
++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
++ * @kvp: array of KVP data.
++ * @nelem: number of KVPs pairs associated with the message.
++ *
++ * returns 0 on success and errno on failure.
++ */
++int msm_rpm_send_message_noirq(enum msm_rpm_set set, uint32_t rsc_type,
++ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems);
++
++/**
++ * msm_rpm_driver_init() - Initialization function that registers for a
++ * rpm platform driver.
++ *
++ * returns 0 on success.
++ */
++int __init msm_rpm_driver_init(void);
++
++#else
++
++static inline struct msm_rpm_request *msm_rpm_create_request(
++ enum msm_rpm_set set, uint32_t rsc_type,
++ uint32_t rsc_id, int num_elements)
++{
++ return NULL;
++}
++
++static inline struct msm_rpm_request *msm_rpm_create_request_noirq(
++ enum msm_rpm_set set, uint32_t rsc_type,
++ uint32_t rsc_id, int num_elements)
++{
++ return NULL;
++
++}
++static inline uint32_t msm_rpm_add_kvp_data(struct msm_rpm_request *handle,
++ uint32_t key, const uint8_t *data, int count)
++{
++ return 0;
++}
++static inline uint32_t msm_rpm_add_kvp_data_noirq(
++ struct msm_rpm_request *handle, uint32_t key,
++ const uint8_t *data, int count)
++{
++ return 0;
++}
++
++static inline void msm_rpm_free_request(struct msm_rpm_request *handle)
++{
++ return;
++}
++
++static inline int msm_rpm_send_request(struct msm_rpm_request *handle)
++{
++ return 0;
++}
++
++static inline int msm_rpm_send_request_noirq(struct msm_rpm_request *handle)
++{
++ return 0;
++
++}
++
++static inline int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type,
++ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems)
++{
++ return 0;
++}
++
++static inline int msm_rpm_send_message_noirq(enum msm_rpm_set set,
++ uint32_t rsc_type, uint32_t rsc_id, struct msm_rpm_kvp *kvp,
++ int nelems)
++{
++ return 0;
++}
++
++static inline int msm_rpm_wait_for_ack(uint32_t msg_id)
++{
++ return 0;
++
++}
++static inline int msm_rpm_wait_for_ack_noirq(uint32_t msg_id)
++{
++ return 0;
++}
++
++static inline int __init msm_rpm_driver_init(void)
++{
++ return 0;
++}
++#endif
++#endif /*__ARCH_ARM_MACH_MSM_RPM_SMD_H*/
+--- /dev/null
++++ b/include/trace/events/trace_msm_bus.h
+@@ -0,0 +1,163 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#undef TRACE_SYSTEM
++#define TRACE_SYSTEM msm_bus
++
++#if !defined(_TRACE_MSM_BUS_H) || defined(TRACE_HEADER_MULTI_READ)
++#define _TRACE_MSM_BUS_H
++
++#include <linux/tracepoint.h>
++
++TRACE_EVENT(bus_update_request,
++
++ TP_PROTO(int sec, int nsec, const char *name, unsigned int index,
++ int src, int dest, unsigned long long ab,
++ unsigned long long ib),
++
++ TP_ARGS(sec, nsec, name, index, src, dest, ab, ib),
++
++ TP_STRUCT__entry(
++ __field(int, sec)
++ __field(int, nsec)
++ __string(name, name)
++ __field(u32, index)
++ __field(int, src)
++ __field(int, dest)
++ __field(u64, ab)
++ __field(u64, ib)
++ ),
++
++ TP_fast_assign(
++ __entry->sec = sec;
++ __entry->nsec = nsec;
++ __assign_str(name, name);
++ __entry->index = index;
++ __entry->src = src;
++ __entry->dest = dest;
++ __entry->ab = ab;
++ __entry->ib = ib;
++ ),
++
++ TP_printk("time= %d.%d name=%s index=%u src=%d dest=%d ab=%llu ib=%llu",
++ __entry->sec,
++ __entry->nsec,
++ __get_str(name),
++ (unsigned int)__entry->index,
++ __entry->src,
++ __entry->dest,
++ (unsigned long long)__entry->ab,
++ (unsigned long long)__entry->ib)
++);
++
++TRACE_EVENT(bus_bimc_config_limiter,
++
++ TP_PROTO(int mas_id, unsigned long long cur_lim_bw),
++
++ TP_ARGS(mas_id, cur_lim_bw),
++
++ TP_STRUCT__entry(
++ __field(int, mas_id)
++ __field(u64, cur_lim_bw)
++ ),
++
++ TP_fast_assign(
++ __entry->mas_id = mas_id;
++ __entry->cur_lim_bw = cur_lim_bw;
++ ),
++
++ TP_printk("Master=%d cur_lim_bw=%llu",
++ __entry->mas_id,
++ (unsigned long long)__entry->cur_lim_bw)
++);
++
++TRACE_EVENT(bus_avail_bw,
++
++ TP_PROTO(unsigned long long cur_bimc_bw, unsigned long long cur_mdp_bw),
++
++ TP_ARGS(cur_bimc_bw, cur_mdp_bw),
++
++ TP_STRUCT__entry(
++ __field(u64, cur_bimc_bw)
++ __field(u64, cur_mdp_bw)
++ ),
++
++ TP_fast_assign(
++ __entry->cur_bimc_bw = cur_bimc_bw;
++ __entry->cur_mdp_bw = cur_mdp_bw;
++ ),
++
++ TP_printk("cur_bimc_bw = %llu cur_mdp_bw = %llu",
++ (unsigned long long)__entry->cur_bimc_bw,
++ (unsigned long long)__entry->cur_mdp_bw)
++);
++
++TRACE_EVENT(bus_rules_matches,
++
++ TP_PROTO(int node_id, int rule_id, unsigned long long node_ab,
++ unsigned long long node_ib, unsigned long long node_clk),
++
++ TP_ARGS(node_id, rule_id, node_ab, node_ib, node_clk),
++
++ TP_STRUCT__entry(
++ __field(int, node_id)
++ __field(int, rule_id)
++ __field(u64, node_ab)
++ __field(u64, node_ib)
++ __field(u64, node_clk)
++ ),
++
++ TP_fast_assign(
++ __entry->node_id = node_id;
++ __entry->rule_id = rule_id;
++ __entry->node_ab = node_ab;
++ __entry->node_ib = node_ib;
++ __entry->node_clk = node_clk;
++ ),
++
++ TP_printk("Rule match node%d rule%d node-ab%llu:ib%llu:clk%llu",
++ __entry->node_id, __entry->rule_id,
++ (unsigned long long)__entry->node_ab,
++ (unsigned long long)__entry->node_ib,
++ (unsigned long long)__entry->node_clk)
++);
++
++TRACE_EVENT(bus_bke_params,
++
++ TP_PROTO(u32 gc, u32 gp, u32 thl, u32 thm, u32 thh),
++
++ TP_ARGS(gc, gp, thl, thm, thh),
++
++ TP_STRUCT__entry(
++ __field(u32, gc)
++ __field(u32, gp)
++ __field(u32, thl)
++ __field(u32, thm)
++ __field(u32, thh)
++ ),
++
++ TP_fast_assign(
++ __entry->gc = gc;
++ __entry->gp = gp;
++ __entry->thl = thl;
++ __entry->thm = thm;
++ __entry->thh = thh;
++ ),
++
++ TP_printk("BKE Params GC=0x%x GP=0x%x THL=0x%x THM=0x%x THH=0x%x",
++ __entry->gc, __entry->gp, __entry->thl, __entry->thm,
++ __entry->thh)
++);
++
++#endif
++#define TRACE_INCLUDE_FILE trace_msm_bus
++#include <trace/define_trace.h>
diff --git a/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch b/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch
new file mode 100644
index 0000000000..ee19f363bd
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch
@@ -0,0 +1,29 @@
+From b8f3a7ccbeca5bdbd1b6210b94b38d3fef2dd0bd Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Thu, 19 Jan 2017 01:57:22 +0100
+Subject: [PATCH 16/38] mtd: ubi: add auto_attach HACK for the ASUS RT-AC58U
+
+This patch adds a hack that allows UBI's autoattach feature
+to work with the custom ASUS UBI_DEV partition name.
+
+This is necessary because the vendor's u-boot doesn't leave
+the bootargs / cmdline alone, so the it can't be overwritten
+easily otherwise.
+
+Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
+---
+ drivers/mtd/ubi/build.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/mtd/ubi/build.c
++++ b/drivers/mtd/ubi/build.c
+@@ -1225,6 +1225,9 @@ static void __init ubi_auto_attach(void)
+ mtd = open_mtd_device("ubi");
+ if (IS_ERR(mtd))
+ mtd = open_mtd_device("data");
++ /* Hack for the Asus RT-AC58U */
++ if (IS_ERR(mtd))
++ mtd = open_mtd_device("UBI_DEV");
+
+ if (!IS_ERR(mtd)) {
+ size_t len;
diff --git a/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
new file mode 100644
index 0000000000..e7ff12142a
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
@@ -0,0 +1,53 @@
+From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001
+From: Rakesh Nair <ranair@codeaurora.org>
+Date: Wed, 20 Jul 2016 15:02:01 +0530
+Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in
+ netdev_ops
+
+Add callback support to get default vlan tag and register
+receive flow steering filter.
+
+Used by IPQ4019 ess-edma driver.
+
+BUG=chrome-os-partner:33096
+TEST=none
+
+Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75
+Signed-off-by: Rakesh Nair <ranair@codeaurora.org>
+Reviewed-on: https://chromium-review.googlesource.com/362203
+Commit-Ready: Grant Grundler <grundler@chromium.org>
+Tested-by: Grant Grundler <grundler@chromium.org>
+Reviewed-by: Grant Grundler <grundler@chromium.org>
+---
+ include/linux/netdevice.h | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -725,6 +725,16 @@ struct xps_map {
+ #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
+ - sizeof(struct xps_map)) / sizeof(u16))
+
++#ifdef CONFIG_RFS_ACCEL
++typedef int (*set_rfs_filter_callback_t)(struct net_device *dev,
++ __be32 src,
++ __be32 dst,
++ __be16 sport,
++ __be16 dport,
++ u8 proto,
++ u16 rxq_index,
++ u32 action);
++#endif
+ /*
+ * This structure holds all XPS maps for device. Maps are indexed by CPU.
+ */
+@@ -1250,6 +1260,9 @@ struct net_device_ops {
+ const struct sk_buff *skb,
+ u16 rxq_index,
+ u32 flow_id);
++ int (*ndo_register_rfs_filter)(struct net_device *dev,
++ set_rfs_filter_callback_t set_filter);
++ int (*ndo_get_default_vlan_tag)(struct net_device *net);
+ #endif
+ int (*ndo_add_slave)(struct net_device *dev,
+ struct net_device *slave_dev);
diff --git a/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch b/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch
new file mode 100644
index 0000000000..003524312c
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch
@@ -0,0 +1,2690 @@
+From 5a71a2005a2e1e6bbe36f00386c495ad6626beb2 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Thu, 19 Jan 2017 01:59:43 +0100
+Subject: [PATCH 30/38] NET: add qualcomm mdio and PHY
+
+---
+ drivers/net/phy/Kconfig | 14 ++++++++++++++
+ drivers/net/phy/Makefile | 2 ++
+ 2 files changed, 16 insertions(+)
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -408,6 +408,20 @@ config XILINX_GMII2RGMII
+ the Reduced Gigabit Media Independent Interface(RGMII) between
+ Ethernet physical media devices and the Gigabit Ethernet controller.
+
++config MDIO_IPQ40XX
++ tristate "Qualcomm Atheros ipq40xx MDIO interface"
++ depends on HAS_IOMEM && OF
++ ---help---
++ This driver supports the MDIO interface found in Qualcomm
++ Atheros ipq40xx Soc chip.
++
++config AR40XX_PHY
++ tristate "Driver for Qualcomm Atheros IPQ40XX switches"
++ depends on HAS_IOMEM && OF
++ select SWCONFIG
++ ---help---
++ This is the driver for Qualcomm Atheros IPQ40XX ESS switches.
++
+ endif # PHYLIB
+
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += md
+ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
+ obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+ obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
++obj-$(CONFIG_MDIO_IPQ40XX) += mdio-ipq40xx.o
+ obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
+ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
+@@ -40,6 +41,7 @@ obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
+
+ obj-$(CONFIG_AMD_PHY) += amd.o
+ obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
++obj-$(CONFIG_AR40XX_PHY) += ar40xx.o
+ obj-$(CONFIG_AT803X_PHY) += at803x.o
+ obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+ obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
+--- /dev/null
++++ b/drivers/net/phy/ar40xx.c
+@@ -0,0 +1,2090 @@
++/*
++ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for
++ * any purpose with or without fee is hereby granted, provided that the
++ * above copyright notice and this permission notice appear in all copies.
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/module.h>
++#include <linux/list.h>
++#include <linux/bitops.h>
++#include <linux/switch.h>
++#include <linux/delay.h>
++#include <linux/phy.h>
++#include <linux/clk.h>
++#include <linux/reset.h>
++#include <linux/lockdep.h>
++#include <linux/workqueue.h>
++#include <linux/of_device.h>
++#include <linux/of_address.h>
++#include <linux/mdio.h>
++#include <linux/gpio.h>
++
++#include "ar40xx.h"
++
++static struct ar40xx_priv *ar40xx_priv;
++
++#define MIB_DESC(_s , _o, _n) \
++ { \
++ .size = (_s), \
++ .offset = (_o), \
++ .name = (_n), \
++ }
++
++static const struct ar40xx_mib_desc ar40xx_mibs[] = {
++ MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"),
++ MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"),
++ MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"),
++ MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"),
++ MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"),
++ MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"),
++ MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"),
++ MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"),
++ MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"),
++ MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"),
++ MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"),
++ MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"),
++ MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"),
++ MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"),
++ MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"),
++ MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"),
++ MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"),
++ MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"),
++ MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"),
++ MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"),
++ MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"),
++ MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"),
++ MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"),
++ MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"),
++ MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"),
++ MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"),
++ MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"),
++ MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"),
++ MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"),
++ MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"),
++ MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"),
++ MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"),
++ MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"),
++ MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"),
++ MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"),
++ MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"),
++ MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"),
++ MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"),
++ MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"),
++};
++
++static u32
++ar40xx_read(struct ar40xx_priv *priv, int reg)
++{
++ return readl(priv->hw_addr + reg);
++}
++
++static u32
++ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg)
++{
++ return readl(priv->psgmii_hw_addr + reg);
++}
++
++static void
++ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val)
++{
++ writel(val, priv->hw_addr + reg);
++}
++
++static u32
++ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
++{
++ u32 ret;
++
++ ret = ar40xx_read(priv, reg);
++ ret &= ~mask;
++ ret |= val;
++ ar40xx_write(priv, reg, ret);
++ return ret;
++}
++
++static void
++ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val)
++{
++ writel(val, priv->psgmii_hw_addr + reg);
++}
++
++static void
++ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr,
++ u16 dbg_addr, u16 dbg_data)
++{
++ struct mii_bus *bus = priv->mii_bus;
++
++ mutex_lock(&bus->mdio_lock);
++ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
++ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data);
++ mutex_unlock(&bus->mdio_lock);
++}
++
++static void
++ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr,
++ u16 dbg_addr, u16 *dbg_data)
++{
++ struct mii_bus *bus = priv->mii_bus;
++
++ mutex_lock(&bus->mdio_lock);
++ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
++ *dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA);
++ mutex_unlock(&bus->mdio_lock);
++}
++
++static void
++ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id,
++ u16 mmd_num, u16 reg_id, u16 reg_val)
++{
++ struct mii_bus *bus = priv->mii_bus;
++
++ mutex_lock(&bus->mdio_lock);
++ bus->write(bus, phy_id,
++ AR40XX_MII_ATH_MMD_ADDR, mmd_num);
++ bus->write(bus, phy_id,
++ AR40XX_MII_ATH_MMD_DATA, reg_id);
++ bus->write(bus, phy_id,
++ AR40XX_MII_ATH_MMD_ADDR,
++ 0x4000 | mmd_num);
++ bus->write(bus, phy_id,
++ AR40XX_MII_ATH_MMD_DATA, reg_val);
++ mutex_unlock(&bus->mdio_lock);
++}
++
++static u16
++ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id,
++ u16 mmd_num, u16 reg_id)
++{
++ u16 value;
++ struct mii_bus *bus = priv->mii_bus;
++
++ mutex_lock(&bus->mdio_lock);
++ bus->write(bus, phy_id,
++ AR40XX_MII_ATH_MMD_ADDR, mmd_num);
++ bus->write(bus, phy_id,
++ AR40XX_MII_ATH_MMD_DATA, reg_id);
++ bus->write(bus, phy_id,
++ AR40XX_MII_ATH_MMD_ADDR,
++ 0x4000 | mmd_num);
++ value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA);
++ mutex_unlock(&bus->mdio_lock);
++ return value;
++}
++
++/* Start of swconfig support */
++
++static void
++ar40xx_phy_poll_reset(struct ar40xx_priv *priv)
++{
++ u32 i, in_reset, retries = 500;
++ struct mii_bus *bus = priv->mii_bus;
++
++ /* Assume RESET was recently issued to some or all of the phys */
++ in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0);
++
++ while (retries--) {
++ /* 1ms should be plenty of time.
++ * 802.3 spec allows for a max wait time of 500ms
++ */
++ usleep_range(1000, 2000);
++
++ for (i = 0; i < AR40XX_NUM_PHYS; i++) {
++ int val;
++
++ /* skip devices which have completed reset */
++ if (!(in_reset & BIT(i)))
++ continue;
++
++ val = mdiobus_read(bus, i, MII_BMCR);
++ if (val < 0)
++ continue;
++
++ /* mark when phy is no longer in reset state */
++ if (!(val & BMCR_RESET))
++ in_reset &= ~BIT(i);
++ }
++
++ if (!in_reset)
++ return;
++ }
++
++ dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n",
++ in_reset);
++}
++
++static void
++ar40xx_phy_init(struct ar40xx_priv *priv)
++{
++ int i;
++ struct mii_bus *bus;
++ u16 val;
++
++ bus = priv->mii_bus;
++ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
++ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
++ val &= ~AR40XX_PHY_MANU_CTRL_EN;
++ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
++ mdiobus_write(bus, i,
++ MII_ADVERTISE, ADVERTISE_ALL |
++ ADVERTISE_PAUSE_CAP |
++ ADVERTISE_PAUSE_ASYM);
++ mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
++ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
++ }
++
++ ar40xx_phy_poll_reset(priv);
++}
++
++static void
++ar40xx_port_phy_linkdown(struct ar40xx_priv *priv)
++{
++ struct mii_bus *bus;
++ int i;
++ u16 val;
++
++ bus = priv->mii_bus;
++ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
++ mdiobus_write(bus, i, MII_CTRL1000, 0);
++ mdiobus_write(bus, i, MII_ADVERTISE, 0);
++ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
++ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
++ val |= AR40XX_PHY_MANU_CTRL_EN;
++ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
++ /* disable transmit */
++ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val);
++ val &= 0xf00f;
++ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val);
++ }
++}
++
++static void
++ar40xx_set_mirror_regs(struct ar40xx_priv *priv)
++{
++ int port;
++
++ /* reset all mirror registers */
++ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
++ AR40XX_FWD_CTRL0_MIRROR_PORT,
++ (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
++ for (port = 0; port < AR40XX_NUM_PORTS; port++) {
++ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port),
++ AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0);
++
++ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port),
++ AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0);
++ }
++
++ /* now enable mirroring if necessary */
++ if (priv->source_port >= AR40XX_NUM_PORTS ||
++ priv->monitor_port >= AR40XX_NUM_PORTS ||
++ priv->source_port == priv->monitor_port) {
++ return;
++ }
++
++ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
++ AR40XX_FWD_CTRL0_MIRROR_PORT,
++ (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
++
++ if (priv->mirror_rx)
++ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0,
++ AR40XX_PORT_LOOKUP_ING_MIRROR_EN);
++
++ if (priv->mirror_tx)
++ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port),
++ 0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN);
++}
++
++static int
++ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++ u8 ports = priv->vlan_table[val->port_vlan];
++ int i;
++
++ val->len = 0;
++ for (i = 0; i < dev->ports; i++) {
++ struct switch_port *p;
++
++ if (!(ports & BIT(i)))
++ continue;
++
++ p = &val->value.ports[val->len++];
++ p->id = i;
++ if ((priv->vlan_tagged & BIT(i)) ||
++ (priv->pvid[i] != val->port_vlan))
++ p->flags = BIT(SWITCH_PORT_FLAG_TAGGED);
++ else
++ p->flags = 0;
++ }
++ return 0;
++}
++
++static int
++ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++ u8 *vt = &priv->vlan_table[val->port_vlan];
++ int i;
++
++ *vt = 0;
++ for (i = 0; i < val->len; i++) {
++ struct switch_port *p = &val->value.ports[i];
++
++ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) {
++ if (val->port_vlan == priv->pvid[p->id])
++ priv->vlan_tagged |= BIT(p->id);
++ } else {
++ priv->vlan_tagged &= ~BIT(p->id);
++ priv->pvid[p->id] = val->port_vlan;
++ }
++
++ *vt |= BIT(p->id);
++ }
++ return 0;
++}
++
++static int
++ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val,
++ unsigned timeout)
++{
++ int i;
++
++ for (i = 0; i < timeout; i++) {
++ u32 t;
++
++ t = ar40xx_read(priv, reg);
++ if ((t & mask) == val)
++ return 0;
++
++ usleep_range(1000, 2000);
++ }
++
++ return -ETIMEDOUT;
++}
++
++static int
++ar40xx_mib_op(struct ar40xx_priv *priv, u32 op)
++{
++ int ret;
++
++ lockdep_assert_held(&priv->mib_lock);
++
++ /* Capture the hardware statistics for all ports */
++ ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC,
++ AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S));
++
++ /* Wait for the capturing to complete. */
++ ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC,
++ AR40XX_MIB_BUSY, 0, 10);
++
++ return ret;
++}
++
++static void
++ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush)
++{
++ unsigned int base;
++ u64 *mib_stats;
++ int i;
++ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
++
++ WARN_ON(port >= priv->dev.ports);
++
++ lockdep_assert_held(&priv->mib_lock);
++
++ base = AR40XX_REG_PORT_STATS_START +
++ AR40XX_REG_PORT_STATS_LEN * port;
++
++ mib_stats = &priv->mib_stats[port * num_mibs];
++ if (flush) {
++ u32 len;
++
++ len = num_mibs * sizeof(*mib_stats);
++ memset(mib_stats, 0, len);
++ return;
++ }
++ for (i = 0; i < num_mibs; i++) {
++ const struct ar40xx_mib_desc *mib;
++ u64 t;
++
++ mib = &ar40xx_mibs[i];
++ t = ar40xx_read(priv, base + mib->offset);
++ if (mib->size == 2) {
++ u64 hi;
++
++ hi = ar40xx_read(priv, base + mib->offset + 4);
++ t |= hi << 32;
++ }
++
++ mib_stats[i] += t;
++ }
++}
++
++static int
++ar40xx_mib_capture(struct ar40xx_priv *priv)
++{
++ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE);
++}
++
++static int
++ar40xx_mib_flush(struct ar40xx_priv *priv)
++{
++ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH);
++}
++
++static int
++ar40xx_sw_set_reset_mibs(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++ unsigned int len;
++ int ret;
++ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
++
++ mutex_lock(&priv->mib_lock);
++
++ len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats);
++ memset(priv->mib_stats, 0, len);
++ ret = ar40xx_mib_flush(priv);
++
++ mutex_unlock(&priv->mib_lock);
++ return ret;
++}
++
++static int
++ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ priv->vlan = !!val->value.i;
++ return 0;
++}
++
++static int
++ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ val->value.i = priv->vlan;
++ return 0;
++}
++
++static int
++ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ priv->mirror_rx = !!val->value.i;
++ ar40xx_set_mirror_regs(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++static int
++ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ val->value.i = priv->mirror_rx;
++ mutex_unlock(&priv->reg_mutex);
++ return 0;
++}
++
++static int
++ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ priv->mirror_tx = !!val->value.i;
++ ar40xx_set_mirror_regs(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++static int
++ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ val->value.i = priv->mirror_tx;
++ mutex_unlock(&priv->reg_mutex);
++ return 0;
++}
++
++static int
++ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ priv->monitor_port = val->value.i;
++ ar40xx_set_mirror_regs(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++static int
++ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ val->value.i = priv->monitor_port;
++ mutex_unlock(&priv->reg_mutex);
++ return 0;
++}
++
++static int
++ar40xx_sw_set_mirror_source_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ priv->source_port = val->value.i;
++ ar40xx_set_mirror_regs(priv);
++ mutex_unlock(&priv->reg_mutex);
++
++ return 0;
++}
++
++static int
++ar40xx_sw_get_mirror_source_port(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ mutex_lock(&priv->reg_mutex);
++ val->value.i = priv->source_port;
++ mutex_unlock(&priv->reg_mutex);
++ return 0;
++}
++
++static int
++ar40xx_sw_set_linkdown(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ if (val->value.i == 1)
++ ar40xx_port_phy_linkdown(priv);
++ else
++ ar40xx_phy_init(priv);
++
++ return 0;
++}
++
++static int
++ar40xx_sw_set_port_reset_mib(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++ int port;
++ int ret;
++
++ port = val->port_vlan;
++ if (port >= dev->ports)
++ return -EINVAL;
++
++ mutex_lock(&priv->mib_lock);
++ ret = ar40xx_mib_capture(priv);
++ if (ret)
++ goto unlock;
++
++ ar40xx_mib_fetch_port_stat(priv, port, true);
++
++unlock:
++ mutex_unlock(&priv->mib_lock);
++ return ret;
++}
++
++static int
++ar40xx_sw_get_port_mib(struct switch_dev *dev,
++ const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++ u64 *mib_stats;
++ int port;
++ int ret;
++ char *buf = priv->buf;
++ int i, len = 0;
++ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
++
++ port = val->port_vlan;
++ if (port >= dev->ports)
++ return -EINVAL;
++
++ mutex_lock(&priv->mib_lock);
++ ret = ar40xx_mib_capture(priv);
++ if (ret)
++ goto unlock;
++
++ ar40xx_mib_fetch_port_stat(priv, port, false);
++
++ len += snprintf(buf + len, sizeof(priv->buf) - len,
++ "Port %d MIB counters\n",
++ port);
++
++ mib_stats = &priv->mib_stats[port * num_mibs];
++ for (i = 0; i < num_mibs; i++)
++ len += snprintf(buf + len, sizeof(priv->buf) - len,
++ "%-12s: %llu\n",
++ ar40xx_mibs[i].name,
++ mib_stats[i]);
++
++ val->value.s = buf;
++ val->len = len;
++
++unlock:
++ mutex_unlock(&priv->mib_lock);
++ return ret;
++}
++
++static int
++ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ priv->vlan_id[val->port_vlan] = val->value.i;
++ return 0;
++}
++
++static int
++ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
++ struct switch_val *val)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ val->value.i = priv->vlan_id[val->port_vlan];
++ return 0;
++}
++
++static int
++ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++ *vlan = priv->pvid[port];
++ return 0;
++}
++
++static int
++ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ /* make sure no invalid PVIDs get set */
++ if (vlan >= dev->vlans)
++ return -EINVAL;
++
++ priv->pvid[port] = vlan;
++ return 0;
++}
++
++static void
++ar40xx_read_port_link(struct ar40xx_priv *priv, int port,
++ struct switch_port_link *link)
++{
++ u32 status;
++ u32 speed;
++
++ memset(link, 0, sizeof(*link));
++
++ status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port));
++
++ link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN);
++ if (link->aneg || (port != AR40XX_PORT_CPU))
++ link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP);
++ else
++ link->link = true;
++
++ if (!link->link)
++ return;
++
++ link->duplex = !!(status & AR40XX_PORT_DUPLEX);
++ link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW);
++ link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW);
++
++ speed = (status & AR40XX_PORT_SPEED) >>
++ AR40XX_PORT_STATUS_SPEED_S;
++
++ switch (speed) {
++ case AR40XX_PORT_SPEED_10M:
++ link->speed = SWITCH_PORT_SPEED_10;
++ break;
++ case AR40XX_PORT_SPEED_100M:
++ link->speed = SWITCH_PORT_SPEED_100;
++ break;
++ case AR40XX_PORT_SPEED_1000M:
++ link->speed = SWITCH_PORT_SPEED_1000;
++ break;
++ default:
++ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
++ break;
++ }
++}
++
++static int
++ar40xx_sw_get_port_link(struct switch_dev *dev, int port,
++ struct switch_port_link *link)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++
++ ar40xx_read_port_link(priv, port, link);
++ return 0;
++}
++
++static const struct switch_attr ar40xx_sw_attr_globals[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_vlan",
++ .description = "Enable VLAN mode",
++ .set = ar40xx_sw_set_vlan,
++ .get = ar40xx_sw_get_vlan,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "reset_mibs",
++ .description = "Reset all MIB counters",
++ .set = ar40xx_sw_set_reset_mibs,
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_mirror_rx",
++ .description = "Enable mirroring of RX packets",
++ .set = ar40xx_sw_set_mirror_rx_enable,
++ .get = ar40xx_sw_get_mirror_rx_enable,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "enable_mirror_tx",
++ .description = "Enable mirroring of TX packets",
++ .set = ar40xx_sw_set_mirror_tx_enable,
++ .get = ar40xx_sw_get_mirror_tx_enable,
++ .max = 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "mirror_monitor_port",
++ .description = "Mirror monitor port",
++ .set = ar40xx_sw_set_mirror_monitor_port,
++ .get = ar40xx_sw_get_mirror_monitor_port,
++ .max = AR40XX_NUM_PORTS - 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "mirror_source_port",
++ .description = "Mirror source port",
++ .set = ar40xx_sw_set_mirror_source_port,
++ .get = ar40xx_sw_get_mirror_source_port,
++ .max = AR40XX_NUM_PORTS - 1
++ },
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "linkdown",
++ .description = "Link down all the PHYs",
++ .set = ar40xx_sw_set_linkdown,
++ .max = 1
++ },
++};
++
++static const struct switch_attr ar40xx_sw_attr_port[] = {
++ {
++ .type = SWITCH_TYPE_NOVAL,
++ .name = "reset_mib",
++ .description = "Reset single port MIB counters",
++ .set = ar40xx_sw_set_port_reset_mib,
++ },
++ {
++ .type = SWITCH_TYPE_STRING,
++ .name = "mib",
++ .description = "Get port's MIB counters",
++ .set = NULL,
++ .get = ar40xx_sw_get_port_mib,
++ },
++};
++
++const struct switch_attr ar40xx_sw_attr_vlan[] = {
++ {
++ .type = SWITCH_TYPE_INT,
++ .name = "vid",
++ .description = "VLAN ID (0-4094)",
++ .set = ar40xx_sw_set_vid,
++ .get = ar40xx_sw_get_vid,
++ .max = 4094,
++ },
++};
++
++/* End of swconfig support */
++
++static int
++ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
++{
++ int timeout = 20;
++ u32 t;
++
++ while (1) {
++ t = ar40xx_read(priv, reg);
++ if ((t & mask) == val)
++ return 0;
++
++ if (timeout-- <= 0)
++ break;
++
++ usleep_range(10, 20);
++ }
++
++ pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n",
++ (unsigned int)reg, t, mask, val);
++ return -ETIMEDOUT;
++}
++
++static int
++ar40xx_atu_flush(struct ar40xx_priv *priv)
++{
++ int ret;
++
++ ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC,
++ AR40XX_ATU_FUNC_BUSY, 0);
++ if (!ret)
++ ar40xx_write(priv, AR40XX_REG_ATU_FUNC,
++ AR40XX_ATU_FUNC_OP_FLUSH |
++ AR40XX_ATU_FUNC_BUSY);
++
++ return ret;
++}
++
++static void
++ar40xx_ess_reset(struct ar40xx_priv *priv)
++{
++ reset_control_assert(priv->ess_rst);
++ mdelay(10);
++ reset_control_deassert(priv->ess_rst);
++ /* Waiting for all inner tables init done.
++ * It cost 5~10ms.
++ */
++ mdelay(10);
++
++ pr_info("ESS reset ok!\n");
++}
++
++/* Start of psgmii self test */
++
++static void
++ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv)
++{
++ u32 n;
++ struct mii_bus *bus = priv->mii_bus;
++ /* reset phy psgmii */
++ /* fix phy psgmii RX 20bit */
++ mdiobus_write(bus, 5, 0x0, 0x005b);
++ /* reset phy psgmii */
++ mdiobus_write(bus, 5, 0x0, 0x001b);
++ /* release reset phy psgmii */
++ mdiobus_write(bus, 5, 0x0, 0x005b);
++
++ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
++ u16 status;
++
++ status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28);
++ if (status & BIT(0))
++ break;
++ /* Polling interval to check PSGMII PLL in malibu is ready
++ * the worst time is 8.67ms
++ * for 25MHz reference clock
++ * [512+(128+2048)*49]*80ns+100us
++ */
++ mdelay(2);
++ }
++
++ /*check malibu psgmii calibration done end..*/
++
++ /*freeze phy psgmii RX CDR*/
++ mdiobus_write(bus, 5, 0x1a, 0x2230);
++
++ ar40xx_ess_reset(priv);
++
++ /*check psgmii calibration done start*/
++ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
++ u32 status;
++
++ status = ar40xx_psgmii_read(priv, 0xa0);
++ if (status & BIT(0))
++ break;
++ /* Polling interval to check PSGMII PLL in ESS is ready */
++ mdelay(2);
++ }
++
++ /* check dakota psgmii calibration done end..*/
++
++ /* relesae phy psgmii RX CDR */
++ mdiobus_write(bus, 5, 0x1a, 0x3230);
++ /* release phy psgmii RX 20bit */
++ mdiobus_write(bus, 5, 0x0, 0x005f);
++}
++
++static void
++ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy)
++{
++ int j;
++ u32 tx_ok, tx_error;
++ u32 rx_ok, rx_error;
++ u32 tx_ok_high16;
++ u32 rx_ok_high16;
++ u32 tx_all_ok, rx_all_ok;
++ struct mii_bus *bus = priv->mii_bus;
++
++ mdiobus_write(bus, phy, 0x0, 0x9000);
++ mdiobus_write(bus, phy, 0x0, 0x4140);
++
++ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
++ u16 status;
++
++ status = mdiobus_read(bus, phy, 0x11);
++ if (status & AR40XX_PHY_SPEC_STATUS_LINK)
++ break;
++ /* the polling interval to check if the PHY link up or not
++ * maxwait_timer: 750 ms +/-10 ms
++ * minwait_timer : 1 us +/- 0.1us
++ * time resides in minwait_timer ~ maxwait_timer
++ * see IEEE 802.3 section 40.4.5.2
++ */
++ mdelay(8);
++ }
++
++ /* enable check */
++ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000);
++ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003);
++
++ /* start traffic */
++ ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000);
++ /* wait for all traffic end
++ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
++ */
++ mdelay(50);
++
++ /* check counter */
++ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
++ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
++ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
++ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
++ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
++ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
++ tx_all_ok = tx_ok + (tx_ok_high16 << 16);
++ rx_all_ok = rx_ok + (rx_ok_high16 << 16);
++ if (tx_all_ok == 0x1000 && tx_error == 0) {
++ /* success */
++ priv->phy_t_status &= (~BIT(phy));
++ } else {
++ pr_info("PHY %d single test PSGMII issue happen!\n", phy);
++ priv->phy_t_status |= BIT(phy);
++ }
++
++ mdiobus_write(bus, phy, 0x0, 0x1840);
++}
++
++static void
++ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv)
++{
++ int phy, j;
++ struct mii_bus *bus = priv->mii_bus;
++
++ mdiobus_write(bus, 0x1f, 0x0, 0x9000);
++ mdiobus_write(bus, 0x1f, 0x0, 0x4140);
++
++ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
++ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
++ u16 status;
++
++ status = mdiobus_read(bus, phy, 0x11);
++ if (!(status & BIT(10)))
++ break;
++ }
++
++ if (phy >= (AR40XX_NUM_PORTS - 1))
++ break;
++ /* The polling interva to check if the PHY link up or not */
++ mdelay(8);
++ }
++ /* enable check */
++ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000);
++ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003);
++
++ /* start traffic */
++ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000);
++ /* wait for all traffic end
++ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
++ */
++ mdelay(50);
++
++ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
++ u32 tx_ok, tx_error;
++ u32 rx_ok, rx_error;
++ u32 tx_ok_high16;
++ u32 rx_ok_high16;
++ u32 tx_all_ok, rx_all_ok;
++
++ /* check counter */
++ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
++ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
++ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
++ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
++ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
++ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
++ tx_all_ok = tx_ok + (tx_ok_high16<<16);
++ rx_all_ok = rx_ok + (rx_ok_high16<<16);
++ if (tx_all_ok == 0x1000 && tx_error == 0) {
++ /* success */
++ priv->phy_t_status &= ~BIT(phy + 8);
++ } else {
++ pr_info("PHY%d test see issue!\n", phy);
++ priv->phy_t_status |= BIT(phy + 8);
++ }
++ }
++
++ pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status);
++}
++
++void
++ar40xx_psgmii_self_test(struct ar40xx_priv *priv)
++{
++ u32 i, phy;
++ struct mii_bus *bus = priv->mii_bus;
++
++ ar40xx_malibu_psgmii_ess_reset(priv);
++
++ /* switch to access MII reg for copper */
++ mdiobus_write(bus, 4, 0x1f, 0x8500);
++ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
++ /*enable phy mdio broadcast write*/
++ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f);
++ }
++ /* force no link by power down */
++ mdiobus_write(bus, 0x1f, 0x0, 0x1840);
++ /*packet number*/
++ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000);
++ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0);
++
++ /*fix mdi status */
++ mdiobus_write(bus, 0x1f, 0x10, 0x6800);
++ for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) {
++ priv->phy_t_status = 0;
++
++ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
++ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
++ AR40XX_PORT_LOOKUP_LOOPBACK,
++ AR40XX_PORT_LOOKUP_LOOPBACK);
++ }
++
++ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++)
++ ar40xx_psgmii_single_phy_testing(priv, phy);
++
++ ar40xx_psgmii_all_phy_testing(priv);
++
++ if (priv->phy_t_status)
++ ar40xx_malibu_psgmii_ess_reset(priv);
++ else
++ break;
++ }
++
++ if (i >= AR40XX_PSGMII_CALB_NUM)
++ pr_info("PSGMII cannot recover\n");
++ else
++ pr_debug("PSGMII recovered after %d times reset\n", i);
++
++ /* configuration recover */
++ /* packet number */
++ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0);
++ /* disable check */
++ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0);
++ /* disable traffic */
++ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0);
++}
++
++void
++ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv)
++{
++ int phy;
++ struct mii_bus *bus = priv->mii_bus;
++
++ /* disable phy internal loopback */
++ mdiobus_write(bus, 0x1f, 0x10, 0x6860);
++ mdiobus_write(bus, 0x1f, 0x0, 0x9040);
++
++ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
++ /* disable mac loop back */
++ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
++ AR40XX_PORT_LOOKUP_LOOPBACK, 0);
++ /* disable phy mdio broadcast write */
++ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f);
++ }
++
++ /* clear fdb entry */
++ ar40xx_atu_flush(priv);
++}
++
++/* End of psgmii self test */
++
++static void
++ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode)
++{
++ if (mode == PORT_WRAPPER_PSGMII) {
++ ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200);
++ ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380);
++ }
++}
++
++static
++int ar40xx_cpuport_setup(struct ar40xx_priv *priv)
++{
++ u32 t;
++
++ t = AR40XX_PORT_STATUS_TXFLOW |
++ AR40XX_PORT_STATUS_RXFLOW |
++ AR40XX_PORT_TXHALF_FLOW |
++ AR40XX_PORT_DUPLEX |
++ AR40XX_PORT_SPEED_1000M;
++ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
++ usleep_range(10, 20);
++
++ t |= AR40XX_PORT_TX_EN |
++ AR40XX_PORT_RX_EN;
++ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
++
++ return 0;
++}
++
++static void
++ar40xx_init_port(struct ar40xx_priv *priv, int port)
++{
++ u32 t;
++
++ ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port),
++ AR40XX_PORT_AUTO_LINK_EN, 0);
++
++ ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
++
++ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0);
++
++ t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S;
++ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
++
++ t = AR40XX_PORT_LOOKUP_LEARN;
++ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
++ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
++}
++
++void
++ar40xx_init_globals(struct ar40xx_priv *priv)
++{
++ u32 t;
++
++ /* enable CPU port and disable mirror port */
++ t = AR40XX_FWD_CTRL0_CPU_PORT_EN |
++ AR40XX_FWD_CTRL0_MIRROR_PORT;
++ ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t);
++
++ /* forward multicast and broadcast frames to CPU */
++ t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) |
++ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) |
++ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S);
++ ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t);
++
++ /* enable jumbo frames */
++ ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE,
++ AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
++
++ /* Enable MIB counters */
++ ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0,
++ AR40XX_MODULE_EN_MIB);
++
++ /* Disable AZ */
++ ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0);
++
++ /* set flowctrl thershold for cpu port */
++ t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) |
++ AR40XX_PORT0_FC_THRESH_OFF_DFLT;
++ ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t);
++}
++
++static void
++ar40xx_malibu_init(struct ar40xx_priv *priv)
++{
++ int i;
++ struct mii_bus *bus;
++ u16 val;
++
++ bus = priv->mii_bus;
++
++ /* war to enable AZ transmitting ability */
++ ar40xx_phy_mmd_write(priv, AR40XX_PSGMII_ID, 1,
++ AR40XX_MALIBU_PSGMII_MODE_CTRL,
++ AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL);
++ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
++ /* change malibu control_dac */
++ val = ar40xx_phy_mmd_read(priv, i, 7,
++ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL);
++ val &= ~AR40XX_MALIBU_DAC_CTRL_MASK;
++ val |= AR40XX_MALIBU_DAC_CTRL_VALUE;
++ ar40xx_phy_mmd_write(priv, i, 7,
++ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL, val);
++ if (i == AR40XX_MALIBU_PHY_LAST_ADDR) {
++ /* to avoid goes into hibernation */
++ val = ar40xx_phy_mmd_read(priv, i, 3,
++ AR40XX_MALIBU_PHY_RLP_CTRL);
++ val &= (~(1<<1));
++ ar40xx_phy_mmd_write(priv, i, 3,
++ AR40XX_MALIBU_PHY_RLP_CTRL, val);
++ }
++ }
++
++ /* adjust psgmii serdes tx amp */
++ mdiobus_write(bus, AR40XX_PSGMII_ID, AR40XX_PSGMII_TX_DRIVER_1_CTRL,
++ AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP);
++}
++
++static int
++ar40xx_hw_init(struct ar40xx_priv *priv)
++{
++ u32 i;
++
++ ar40xx_ess_reset(priv);
++
++ if (priv->mii_bus)
++ ar40xx_malibu_init(priv);
++ else
++ return -1;
++
++ ar40xx_psgmii_self_test(priv);
++ ar40xx_psgmii_self_test_clean(priv);
++
++ ar40xx_mac_mode_init(priv, priv->mac_mode);
++
++ for (i = 0; i < priv->dev.ports; i++)
++ ar40xx_init_port(priv, i);
++
++ ar40xx_init_globals(priv);
++
++ return 0;
++}
++
++/* Start of qm error WAR */
++
++static
++int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id)
++{
++ u32 reg;
++
++ if (port_id < 0 || port_id > 6)
++ return -1;
++
++ reg = AR40XX_REG_PORT_STATUS(port_id);
++ return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED,
++ (AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX));
++}
++
++static
++int ar40xx_get_qm_status(struct ar40xx_priv *priv,
++ u32 port_id, u32 *qm_buffer_err)
++{
++ u32 reg;
++ u32 qm_val;
++
++ if (port_id < 1 || port_id > 5) {
++ *qm_buffer_err = 0;
++ return -1;
++ }
++
++ if (port_id < 4) {
++ reg = AR40XX_REG_QM_PORT0_3_QNUM;
++ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
++ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
++ /* every 8 bits for each port */
++ *qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF;
++ } else {
++ reg = AR40XX_REG_QM_PORT4_6_QNUM;
++ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
++ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
++ /* every 8 bits for each port */
++ *qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF;
++ }
++
++ return 0;
++}
++
++static void
++ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv)
++{
++ static int task_count;
++ u32 i;
++ u32 reg, value;
++ u32 link, speed, duplex;
++ u32 qm_buffer_err;
++ u16 port_phy_status[AR40XX_NUM_PORTS];
++ static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
++ static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
++ struct mii_bus *bus = NULL;
++
++ if (!priv || !priv->mii_bus)
++ return;
++
++ bus = priv->mii_bus;
++
++ ++task_count;
++
++ for (i = 1; i < AR40XX_NUM_PORTS; ++i) {
++ port_phy_status[i] =
++ mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS);
++ speed = link = duplex = port_phy_status[i];
++ speed &= AR40XX_PHY_SPEC_STATUS_SPEED;
++ speed >>= 14;
++ link &= AR40XX_PHY_SPEC_STATUS_LINK;
++ link >>= 10;
++ duplex &= AR40XX_PHY_SPEC_STATUS_DUPLEX;
++ duplex >>= 13;
++
++ if (link != priv->ar40xx_port_old_link[i]) {
++ ++link_cnt[i];
++ /* Up --> Down */
++ if ((priv->ar40xx_port_old_link[i] ==
++ AR40XX_PORT_LINK_UP) &&
++ (link == AR40XX_PORT_LINK_DOWN)) {
++ /* LINK_EN disable(MAC force mode)*/
++ reg = AR40XX_REG_PORT_STATUS(i);
++ ar40xx_rmw(priv, reg,
++ AR40XX_PORT_AUTO_LINK_EN, 0);
++
++ /* Check queue buffer */
++ qm_err_cnt[i] = 0;
++ ar40xx_get_qm_status(priv, i, &qm_buffer_err);
++ if (qm_buffer_err) {
++ priv->ar40xx_port_qm_buf[i] =
++ AR40XX_QM_NOT_EMPTY;
++ } else {
++ u16 phy_val = 0;
++
++ priv->ar40xx_port_qm_buf[i] =
++ AR40XX_QM_EMPTY;
++ ar40xx_force_1g_full(priv, i);
++ /* Ref:QCA8337 Datasheet,Clearing
++ * MENU_CTRL_EN prevents phy to
++ * stuck in 100BT mode when
++ * bringing up the link
++ */
++ ar40xx_phy_dbg_read(priv, i-1,
++ AR40XX_PHY_DEBUG_0,
++ &phy_val);
++ phy_val &= (~AR40XX_PHY_MANU_CTRL_EN);
++ ar40xx_phy_dbg_write(priv, i-1,
++ AR40XX_PHY_DEBUG_0,
++ phy_val);
++ }
++ priv->ar40xx_port_old_link[i] = link;
++ } else if ((priv->ar40xx_port_old_link[i] ==
++ AR40XX_PORT_LINK_DOWN) &&
++ (link == AR40XX_PORT_LINK_UP)) {
++ /* Down --> Up */
++ if (priv->port_link_up[i] < 1) {
++ ++priv->port_link_up[i];
++ } else {
++ /* Change port status */
++ reg = AR40XX_REG_PORT_STATUS(i);
++ value = ar40xx_read(priv, reg);
++ priv->port_link_up[i] = 0;
++
++ value &= ~(AR40XX_PORT_DUPLEX |
++ AR40XX_PORT_SPEED);
++ value |= speed | (duplex ? BIT(6) : 0);
++ ar40xx_write(priv, reg, value);
++ /* clock switch need such time
++ * to avoid glitch
++ */
++ usleep_range(100, 200);
++
++ value |= AR40XX_PORT_AUTO_LINK_EN;
++ ar40xx_write(priv, reg, value);
++ /* HW need such time to make sure link
++ * stable before enable MAC
++ */
++ usleep_range(100, 200);
++
++ if (speed == AR40XX_PORT_SPEED_100M) {
++ u16 phy_val = 0;
++ /* Enable @100M, if down to 10M
++ * clock will change smoothly
++ */
++ ar40xx_phy_dbg_read(priv, i-1,
++ 0,
++ &phy_val);
++ phy_val |=
++ AR40XX_PHY_MANU_CTRL_EN;
++ ar40xx_phy_dbg_write(priv, i-1,
++ 0,
++ phy_val);
++ }
++ priv->ar40xx_port_old_link[i] = link;
++ }
++ }
++ }
++
++ if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) {
++ /* Check QM */
++ ar40xx_get_qm_status(priv, i, &qm_buffer_err);
++ if (qm_buffer_err) {
++ ++qm_err_cnt[i];
++ } else {
++ priv->ar40xx_port_qm_buf[i] =
++ AR40XX_QM_EMPTY;
++ qm_err_cnt[i] = 0;
++ ar40xx_force_1g_full(priv, i);
++ }
++ }
++ }
++}
++
++static void
++ar40xx_qm_err_check_work_task(struct work_struct *work)
++{
++ struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv,
++ qm_dwork.work);
++
++ mutex_lock(&priv->qm_lock);
++
++ ar40xx_sw_mac_polling_task(priv);
++
++ mutex_unlock(&priv->qm_lock);
++
++ schedule_delayed_work(&priv->qm_dwork,
++ msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
++}
++
++static int
++ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv)
++{
++ mutex_init(&priv->qm_lock);
++
++ INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task);
++
++ schedule_delayed_work(&priv->qm_dwork,
++ msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
++
++ return 0;
++}
++
++/* End of qm error WAR */
++
++static int
++ar40xx_vlan_init(struct ar40xx_priv *priv)
++{
++ int port;
++ unsigned long bmp;
++
++ /* By default Enable VLAN */
++ priv->vlan = 1;
++ priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp;
++ priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp;
++ priv->vlan_tagged = priv->cpu_bmp;
++ bmp = priv->lan_bmp;
++ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
++ priv->pvid[port] = AR40XX_LAN_VLAN;
++
++ bmp = priv->wan_bmp;
++ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
++ priv->pvid[port] = AR40XX_WAN_VLAN;
++
++ return 0;
++}
++
++static void
++ar40xx_mib_work_func(struct work_struct *work)
++{
++ struct ar40xx_priv *priv;
++ int err;
++
++ priv = container_of(work, struct ar40xx_priv, mib_work.work);
++
++ mutex_lock(&priv->mib_lock);
++
++ err = ar40xx_mib_capture(priv);
++ if (err)
++ goto next_port;
++
++ ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false);
++
++next_port:
++ priv->mib_next_port++;
++ if (priv->mib_next_port >= priv->dev.ports)
++ priv->mib_next_port = 0;
++
++ mutex_unlock(&priv->mib_lock);
++
++ schedule_delayed_work(&priv->mib_work,
++ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
++}
++
++static void
++ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members)
++{
++ u32 t;
++ u32 egress, ingress;
++ u32 pvid = priv->vlan_id[priv->pvid[port]];
++
++ if (priv->vlan) {
++ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
++ ingress = AR40XX_IN_SECURE;
++ } else {
++ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH;
++ ingress = AR40XX_IN_PORT_ONLY;
++ }
++
++ t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S;
++ t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S;
++ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t);
++
++ t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
++ t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
++ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
++
++ t = members;
++ t |= AR40XX_PORT_LOOKUP_LEARN;
++ t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S;
++ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
++ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
++}
++
++static void
++ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val)
++{
++ if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1,
++ AR40XX_VTU_FUNC1_BUSY, 0))
++ return;
++
++ if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD)
++ ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val);
++
++ op |= AR40XX_VTU_FUNC1_BUSY;
++ ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op);
++}
++
++static void
++ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask)
++{
++ u32 op;
++ u32 val;
++ int i;
++
++ op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S);
++ val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL;
++ for (i = 0; i < AR40XX_NUM_PORTS; i++) {
++ u32 mode;
++
++ if ((port_mask & BIT(i)) == 0)
++ mode = AR40XX_VTU_FUNC0_EG_MODE_NOT;
++ else if (priv->vlan == 0)
++ mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP;
++ else if ((priv->vlan_tagged & BIT(i)) ||
++ (priv->vlan_id[priv->pvid[i]] != vid))
++ mode = AR40XX_VTU_FUNC0_EG_MODE_TAG;
++ else
++ mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG;
++
++ val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i);
++ }
++ ar40xx_vtu_op(priv, op, val);
++}
++
++static void
++ar40xx_vtu_flush(struct ar40xx_priv *priv)
++{
++ ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0);
++}
++
++static int
++ar40xx_sw_hw_apply(struct switch_dev *dev)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++ u8 portmask[AR40XX_NUM_PORTS];
++ int i, j;
++
++ mutex_lock(&priv->reg_mutex);
++ /* flush all vlan entries */
++ ar40xx_vtu_flush(priv);
++
++ memset(portmask, 0, sizeof(portmask));
++ if (priv->vlan) {
++ for (j = 0; j < AR40XX_MAX_VLANS; j++) {
++ u8 vp = priv->vlan_table[j];
++
++ if (!vp)
++ continue;
++
++ for (i = 0; i < dev->ports; i++) {
++ u8 mask = BIT(i);
++
++ if (vp & mask)
++ portmask[i] |= vp & ~mask;
++ }
++
++ ar40xx_vtu_load_vlan(priv, priv->vlan_id[j],
++ priv->vlan_table[j]);
++ }
++ } else {
++ /* 8021q vlan disabled */
++ for (i = 0; i < dev->ports; i++) {
++ if (i == AR40XX_PORT_CPU)
++ continue;
++
++ portmask[i] = BIT(AR40XX_PORT_CPU);
++ portmask[AR40XX_PORT_CPU] |= BIT(i);
++ }
++ }
++
++ /* update the port destination mask registers and tag settings */
++ for (i = 0; i < dev->ports; i++)
++ ar40xx_setup_port(priv, i, portmask[i]);
++
++ ar40xx_set_mirror_regs(priv);
++
++ mutex_unlock(&priv->reg_mutex);
++ return 0;
++}
++
++static int
++ar40xx_sw_reset_switch(struct switch_dev *dev)
++{
++ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
++ int i, rv;
++
++ mutex_lock(&priv->reg_mutex);
++ memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) -
++ offsetof(struct ar40xx_priv, vlan));
++
++ for (i = 0; i < AR40XX_MAX_VLANS; i++)
++ priv->vlan_id[i] = i;
++
++ ar40xx_vlan_init(priv);
++
++ priv->mirror_rx = false;
++ priv->mirror_tx = false;
++ priv->source_port = 0;
++ priv->monitor_port = 0;
++
++ mutex_unlock(&priv->reg_mutex);
++
++ rv = ar40xx_sw_hw_apply(dev);
++ return rv;
++}
++
++static int
++ar40xx_start(struct ar40xx_priv *priv)
++{
++ int ret;
++
++ ret = ar40xx_hw_init(priv);
++ if (ret)
++ return ret;
++
++ ret = ar40xx_sw_reset_switch(&priv->dev);
++ if (ret)
++ return ret;
++
++ /* at last, setup cpu port */
++ ret = ar40xx_cpuport_setup(priv);
++ if (ret)
++ return ret;
++
++ schedule_delayed_work(&priv->mib_work,
++ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
++
++ ar40xx_qm_err_check_work_start(priv);
++
++ return 0;
++}
++
++static const struct switch_dev_ops ar40xx_sw_ops = {
++ .attr_global = {
++ .attr = ar40xx_sw_attr_globals,
++ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals),
++ },
++ .attr_port = {
++ .attr = ar40xx_sw_attr_port,
++ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_port),
++ },
++ .attr_vlan = {
++ .attr = ar40xx_sw_attr_vlan,
++ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan),
++ },
++ .get_port_pvid = ar40xx_sw_get_pvid,
++ .set_port_pvid = ar40xx_sw_set_pvid,
++ .get_vlan_ports = ar40xx_sw_get_ports,
++ .set_vlan_ports = ar40xx_sw_set_ports,
++ .apply_config = ar40xx_sw_hw_apply,
++ .reset_switch = ar40xx_sw_reset_switch,
++ .get_port_link = ar40xx_sw_get_port_link,
++};
++
++/* Start of phy driver support */
++
++static const u32 ar40xx_phy_ids[] = {
++ 0x004dd0b1,
++ 0x004dd0b2, /* AR40xx */
++};
++
++static bool
++ar40xx_phy_match(u32 phy_id)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(ar40xx_phy_ids); i++)
++ if (phy_id == ar40xx_phy_ids[i])
++ return true;
++
++ return false;
++}
++
++static bool
++is_ar40xx_phy(struct mii_bus *bus)
++{
++ unsigned i;
++
++ for (i = 0; i < 4; i++) {
++ u32 phy_id;
++
++ phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16;
++ phy_id |= mdiobus_read(bus, i, MII_PHYSID2);
++ if (!ar40xx_phy_match(phy_id))
++ return false;
++ }
++
++ return true;
++}
++
++static int
++ar40xx_phy_probe(struct phy_device *phydev)
++{
++ if (!is_ar40xx_phy(phydev->mdio.bus))
++ return -ENODEV;
++
++ ar40xx_priv->mii_bus = phydev->mdio.bus;
++ phydev->priv = ar40xx_priv;
++ if (phydev->mdio.addr == 0)
++ ar40xx_priv->phy = phydev;
++
++ phydev->supported |= SUPPORTED_1000baseT_Full;
++ phydev->advertising |= ADVERTISED_1000baseT_Full;
++ return 0;
++}
++
++static void
++ar40xx_phy_remove(struct phy_device *phydev)
++{
++ ar40xx_priv->mii_bus = NULL;
++ phydev->priv = NULL;
++}
++
++static int
++ar40xx_phy_config_init(struct phy_device *phydev)
++{
++ return 0;
++}
++
++static int
++ar40xx_phy_read_status(struct phy_device *phydev)
++{
++ if (phydev->mdio.addr != 0)
++ return genphy_read_status(phydev);
++
++ return 0;
++}
++
++static int
++ar40xx_phy_config_aneg(struct phy_device *phydev)
++{
++ if (phydev->mdio.addr == 0)
++ return 0;
++
++ return genphy_config_aneg(phydev);
++}
++
++static struct phy_driver ar40xx_phy_driver = {
++ .phy_id = 0x004d0000,
++ .name = "QCA Malibu",
++ .phy_id_mask = 0xffff0000,
++ .features = PHY_BASIC_FEATURES,
++ .probe = ar40xx_phy_probe,
++ .remove = ar40xx_phy_remove,
++ .config_init = ar40xx_phy_config_init,
++ .config_aneg = ar40xx_phy_config_aneg,
++ .read_status = ar40xx_phy_read_status,
++};
++
++static uint16_t ar40xx_gpio_get_phy(unsigned int offset)
++{
++ return offset / 4;
++}
++
++static uint16_t ar40xx_gpio_get_reg(unsigned int offset)
++{
++ return 0x8074 + offset % 4;
++}
++
++static void ar40xx_gpio_set(struct gpio_chip *gc, unsigned int offset,
++ int value)
++{
++ struct ar40xx_priv *priv = gpiochip_get_data(gc);
++
++ ar40xx_phy_mmd_write(priv, ar40xx_gpio_get_phy(offset), 0x7,
++ ar40xx_gpio_get_reg(offset),
++ value ? 0xA000 : 0x8000);
++}
++
++static int ar40xx_gpio_get(struct gpio_chip *gc, unsigned offset)
++{
++ struct ar40xx_priv *priv = gpiochip_get_data(gc);
++
++ return ar40xx_phy_mmd_read(priv, ar40xx_gpio_get_phy(offset), 0x7,
++ ar40xx_gpio_get_reg(offset)) == 0xA000;
++}
++
++static int ar40xx_gpio_get_dir(struct gpio_chip *gc, unsigned offset)
++{
++ return 0; /* only out direction */
++}
++
++static int ar40xx_gpio_dir_out(struct gpio_chip *gc, unsigned offset,
++ int value)
++{
++ /*
++ * the direction out value is used to set the initial value.
++ * support of this function is required by leds-gpio.c
++ */
++ ar40xx_gpio_set(gc, offset, value);
++ return 0;
++}
++
++static void ar40xx_register_gpio(struct device *pdev,
++ struct ar40xx_priv *priv,
++ struct device_node *switch_node)
++{
++ struct gpio_chip *gc;
++ int err;
++
++ gc = devm_kzalloc(pdev, sizeof(*gc), GFP_KERNEL);
++ if (!gc)
++ return;
++
++ gc->label = "ar40xx_gpio",
++ gc->base = -1,
++ gc->ngpio = 5 /* mmd 0 - 4 */ * 4 /* 0x8074 - 0x8077 */,
++ gc->parent = pdev;
++ gc->owner = THIS_MODULE;
++
++ gc->get_direction = ar40xx_gpio_get_dir;
++ gc->direction_output = ar40xx_gpio_dir_out;
++ gc->get = ar40xx_gpio_get;
++ gc->set = ar40xx_gpio_set;
++ gc->can_sleep = true;
++ gc->label = priv->dev.name;
++ gc->of_node = switch_node;
++
++ err = devm_gpiochip_add_data(pdev, gc, priv);
++ if (err != 0)
++ dev_err(pdev, "Failed to register gpio %d.\n", err);
++}
++
++/* End of phy driver support */
++
++/* Platform driver probe function */
++
++static int ar40xx_probe(struct platform_device *pdev)
++{
++ struct device_node *switch_node;
++ struct device_node *psgmii_node;
++ const __be32 *mac_mode;
++ struct clk *ess_clk;
++ struct switch_dev *swdev;
++ struct ar40xx_priv *priv;
++ u32 len;
++ u32 num_mibs;
++ struct resource psgmii_base = {0};
++ struct resource switch_base = {0};
++ int ret;
++
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ platform_set_drvdata(pdev, priv);
++ ar40xx_priv = priv;
++
++ switch_node = of_node_get(pdev->dev.of_node);
++ if (of_address_to_resource(switch_node, 0, &switch_base) != 0)
++ return -EIO;
++
++ priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base);
++ if (IS_ERR(priv->hw_addr)) {
++ dev_err(&pdev->dev, "Failed to ioremap switch_base!\n");
++ return PTR_ERR(priv->hw_addr);
++ }
++
++ /*psgmii dts get*/
++ psgmii_node = of_find_node_by_name(NULL, "ess-psgmii");
++ if (!psgmii_node) {
++ dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n");
++ return -EINVAL;
++ }
++
++ if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0)
++ return -EIO;
++
++ priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base);
++ if (IS_ERR(priv->psgmii_hw_addr)) {
++ dev_err(&pdev->dev, "psgmii ioremap fail!\n");
++ return PTR_ERR(priv->psgmii_hw_addr);
++ }
++
++ mac_mode = of_get_property(switch_node, "switch_mac_mode", &len);
++ if (!mac_mode) {
++ dev_err(&pdev->dev, "Failed to read switch_mac_mode\n");
++ return -EINVAL;
++ }
++ priv->mac_mode = be32_to_cpup(mac_mode);
++
++ ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
++ if (ess_clk)
++ clk_prepare_enable(ess_clk);
++
++ priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst");
++ if (IS_ERR(priv->ess_rst)) {
++ dev_err(&pdev->dev, "Failed to get ess_rst control!\n");
++ return PTR_ERR(priv->ess_rst);
++ }
++
++ if (of_property_read_u32(switch_node, "switch_cpu_bmp",
++ &priv->cpu_bmp) ||
++ of_property_read_u32(switch_node, "switch_lan_bmp",
++ &priv->lan_bmp) ||
++ of_property_read_u32(switch_node, "switch_wan_bmp",
++ &priv->wan_bmp)) {
++ dev_err(&pdev->dev, "Failed to read port properties\n");
++ return -EIO;
++ }
++
++ ret = phy_driver_register(&ar40xx_phy_driver, THIS_MODULE);
++ if (ret) {
++ dev_err(&pdev->dev, "Failed to register ar40xx phy driver!\n");
++ return -EIO;
++ }
++
++ mutex_init(&priv->reg_mutex);
++ mutex_init(&priv->mib_lock);
++ INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func);
++
++ /* register switch */
++ swdev = &priv->dev;
++
++ swdev->alias = dev_name(&priv->mii_bus->dev);
++
++ swdev->cpu_port = AR40XX_PORT_CPU;
++ swdev->name = "QCA AR40xx";
++ swdev->vlans = AR40XX_MAX_VLANS;
++ swdev->ports = AR40XX_NUM_PORTS;
++ swdev->ops = &ar40xx_sw_ops;
++ ret = register_switch(swdev, NULL);
++ if (ret)
++ goto err_unregister_phy;
++
++ num_mibs = ARRAY_SIZE(ar40xx_mibs);
++ len = priv->dev.ports * num_mibs *
++ sizeof(*priv->mib_stats);
++ priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
++ if (!priv->mib_stats) {
++ ret = -ENOMEM;
++ goto err_unregister_switch;
++ }
++
++ ar40xx_start(priv);
++
++ if (of_property_read_bool(switch_node, "gpio-controller"))
++ ar40xx_register_gpio(&pdev->dev, ar40xx_priv, switch_node);
++
++ return 0;
++
++err_unregister_switch:
++ unregister_switch(&priv->dev);
++err_unregister_phy:
++ phy_driver_unregister(&ar40xx_phy_driver);
++ platform_set_drvdata(pdev, NULL);
++ return ret;
++}
++
++static int ar40xx_remove(struct platform_device *pdev)
++{
++ struct ar40xx_priv *priv = platform_get_drvdata(pdev);
++
++ cancel_delayed_work_sync(&priv->qm_dwork);
++ cancel_delayed_work_sync(&priv->mib_work);
++
++ unregister_switch(&priv->dev);
++
++ phy_driver_unregister(&ar40xx_phy_driver);
++
++ return 0;
++}
++
++static const struct of_device_id ar40xx_of_mtable[] = {
++ {.compatible = "qcom,ess-switch" },
++ {}
++};
++
++struct platform_driver ar40xx_drv = {
++ .probe = ar40xx_probe,
++ .remove = ar40xx_remove,
++ .driver = {
++ .name = "ar40xx",
++ .of_match_table = ar40xx_of_mtable,
++ },
++};
++
++module_platform_driver(ar40xx_drv);
++
++MODULE_DESCRIPTION("IPQ40XX ESS driver");
++MODULE_LICENSE("Dual BSD/GPL");
+--- /dev/null
++++ b/drivers/net/phy/ar40xx.h
+@@ -0,0 +1,337 @@
++/*
++ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for
++ * any purpose with or without fee is hereby granted, provided that the
++ * above copyright notice and this permission notice appear in all copies.
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++ #ifndef __AR40XX_H
++#define __AR40XX_H
++
++#define AR40XX_MAX_VLANS 128
++#define AR40XX_NUM_PORTS 6
++#define AR40XX_NUM_PHYS 5
++
++#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s)
++
++struct ar40xx_priv {
++ struct switch_dev dev;
++
++ u8 __iomem *hw_addr;
++ u8 __iomem *psgmii_hw_addr;
++ u32 mac_mode;
++ struct reset_control *ess_rst;
++ u32 cpu_bmp;
++ u32 lan_bmp;
++ u32 wan_bmp;
++
++ struct mii_bus *mii_bus;
++ struct phy_device *phy;
++
++ /* mutex for qm task */
++ struct mutex qm_lock;
++ struct delayed_work qm_dwork;
++ u32 port_link_up[AR40XX_NUM_PORTS];
++ u32 ar40xx_port_old_link[AR40XX_NUM_PORTS];
++ u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS];
++
++ u32 phy_t_status;
++
++ /* mutex for switch reg access */
++ struct mutex reg_mutex;
++
++ /* mutex for mib task */
++ struct mutex mib_lock;
++ struct delayed_work mib_work;
++ int mib_next_port;
++ u64 *mib_stats;
++
++ char buf[2048];
++
++ /* all fields below will be cleared on reset */
++ bool vlan;
++ u16 vlan_id[AR40XX_MAX_VLANS];
++ u8 vlan_table[AR40XX_MAX_VLANS];
++ u8 vlan_tagged;
++ u16 pvid[AR40XX_NUM_PORTS];
++
++ /* mirror */
++ bool mirror_rx;
++ bool mirror_tx;
++ int source_port;
++ int monitor_port;
++};
++
++#define AR40XX_PORT_LINK_UP 1
++#define AR40XX_PORT_LINK_DOWN 0
++#define AR40XX_QM_NOT_EMPTY 1
++#define AR40XX_QM_EMPTY 0
++
++#define AR40XX_LAN_VLAN 1
++#define AR40XX_WAN_VLAN 2
++
++enum ar40xx_port_wrapper_cfg {
++ PORT_WRAPPER_PSGMII = 0,
++};
++
++struct ar40xx_mib_desc {
++ u32 size;
++ u32 offset;
++ const char *name;
++};
++
++#define AR40XX_PORT_CPU 0
++
++#define AR40XX_PSGMII_MODE_CONTROL 0x1b4
++#define AR40XX_PSGMII_ATHR_CSCO_MODE_25M BIT(0)
++
++#define AR40XX_PSGMIIPHY_TX_CONTROL 0x288
++
++#define AR40XX_MII_ATH_MMD_ADDR 0x0d
++#define AR40XX_MII_ATH_MMD_DATA 0x0e
++#define AR40XX_MII_ATH_DBG_ADDR 0x1d
++#define AR40XX_MII_ATH_DBG_DATA 0x1e
++
++#define AR40XX_STATS_RXBROAD 0x00
++#define AR40XX_STATS_RXPAUSE 0x04
++#define AR40XX_STATS_RXMULTI 0x08
++#define AR40XX_STATS_RXFCSERR 0x0c
++#define AR40XX_STATS_RXALIGNERR 0x10
++#define AR40XX_STATS_RXRUNT 0x14
++#define AR40XX_STATS_RXFRAGMENT 0x18
++#define AR40XX_STATS_RX64BYTE 0x1c
++#define AR40XX_STATS_RX128BYTE 0x20
++#define AR40XX_STATS_RX256BYTE 0x24
++#define AR40XX_STATS_RX512BYTE 0x28
++#define AR40XX_STATS_RX1024BYTE 0x2c
++#define AR40XX_STATS_RX1518BYTE 0x30
++#define AR40XX_STATS_RXMAXBYTE 0x34
++#define AR40XX_STATS_RXTOOLONG 0x38
++#define AR40XX_STATS_RXGOODBYTE 0x3c
++#define AR40XX_STATS_RXBADBYTE 0x44
++#define AR40XX_STATS_RXOVERFLOW 0x4c
++#define AR40XX_STATS_FILTERED 0x50
++#define AR40XX_STATS_TXBROAD 0x54
++#define AR40XX_STATS_TXPAUSE 0x58
++#define AR40XX_STATS_TXMULTI 0x5c
++#define AR40XX_STATS_TXUNDERRUN 0x60
++#define AR40XX_STATS_TX64BYTE 0x64
++#define AR40XX_STATS_TX128BYTE 0x68
++#define AR40XX_STATS_TX256BYTE 0x6c
++#define AR40XX_STATS_TX512BYTE 0x70
++#define AR40XX_STATS_TX1024BYTE 0x74
++#define AR40XX_STATS_TX1518BYTE 0x78
++#define AR40XX_STATS_TXMAXBYTE 0x7c
++#define AR40XX_STATS_TXOVERSIZE 0x80
++#define AR40XX_STATS_TXBYTE 0x84
++#define AR40XX_STATS_TXCOLLISION 0x8c
++#define AR40XX_STATS_TXABORTCOL 0x90
++#define AR40XX_STATS_TXMULTICOL 0x94
++#define AR40XX_STATS_TXSINGLECOL 0x98
++#define AR40XX_STATS_TXEXCDEFER 0x9c
++#define AR40XX_STATS_TXDEFER 0xa0
++#define AR40XX_STATS_TXLATECOL 0xa4
++
++#define AR40XX_REG_MODULE_EN 0x030
++#define AR40XX_MODULE_EN_MIB BIT(0)
++
++#define AR40XX_REG_MIB_FUNC 0x034
++#define AR40XX_MIB_BUSY BIT(17)
++#define AR40XX_MIB_CPU_KEEP BIT(20)
++#define AR40XX_MIB_FUNC BITS(24, 3)
++#define AR40XX_MIB_FUNC_S 24
++#define AR40XX_MIB_FUNC_NO_OP 0x0
++#define AR40XX_MIB_FUNC_FLUSH 0x1
++
++#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
++#define AR40XX_PORT_SPEED BITS(0, 2)
++#define AR40XX_PORT_STATUS_SPEED_S 0
++#define AR40XX_PORT_TX_EN BIT(2)
++#define AR40XX_PORT_RX_EN BIT(3)
++#define AR40XX_PORT_STATUS_TXFLOW BIT(4)
++#define AR40XX_PORT_STATUS_RXFLOW BIT(5)
++#define AR40XX_PORT_DUPLEX BIT(6)
++#define AR40XX_PORT_TXHALF_FLOW BIT(7)
++#define AR40XX_PORT_STATUS_LINK_UP BIT(8)
++#define AR40XX_PORT_AUTO_LINK_EN BIT(9)
++#define AR40XX_PORT_STATUS_FLOW_CONTROL BIT(12)
++
++#define AR40XX_REG_MAX_FRAME_SIZE 0x078
++#define AR40XX_MAX_FRAME_SIZE_MTU BITS(0, 14)
++
++#define AR40XX_REG_PORT_HEADER(_i) (0x09c + (_i) * 4)
++
++#define AR40XX_REG_EEE_CTRL 0x100
++#define AR40XX_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2)
++
++#define AR40XX_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8)
++#define AR40XX_PORT_VLAN0_DEF_SVID BITS(0, 12)
++#define AR40XX_PORT_VLAN0_DEF_SVID_S 0
++#define AR40XX_PORT_VLAN0_DEF_CVID BITS(16, 12)
++#define AR40XX_PORT_VLAN0_DEF_CVID_S 16
++
++#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8)
++#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6)
++#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2)
++#define AR40XX_PORT_VLAN1_OUT_MODE_S 12
++#define AR40XX_PORT_VLAN1_OUT_MODE_UNMOD 0
++#define AR40XX_PORT_VLAN1_OUT_MODE_UNTAG 1
++#define AR40XX_PORT_VLAN1_OUT_MODE_TAG 2
++#define AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH 3
++
++#define AR40XX_REG_VTU_FUNC0 0x0610
++#define AR40XX_VTU_FUNC0_EG_MODE BITS(4, 14)
++#define AR40XX_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2)
++#define AR40XX_VTU_FUNC0_EG_MODE_KEEP 0
++#define AR40XX_VTU_FUNC0_EG_MODE_UNTAG 1
++#define AR40XX_VTU_FUNC0_EG_MODE_TAG 2
++#define AR40XX_VTU_FUNC0_EG_MODE_NOT 3
++#define AR40XX_VTU_FUNC0_IVL BIT(19)
++#define AR40XX_VTU_FUNC0_VALID BIT(20)
++
++#define AR40XX_REG_VTU_FUNC1 0x0614
++#define AR40XX_VTU_FUNC1_OP BITS(0, 3)
++#define AR40XX_VTU_FUNC1_OP_NOOP 0
++#define AR40XX_VTU_FUNC1_OP_FLUSH 1
++#define AR40XX_VTU_FUNC1_OP_LOAD 2
++#define AR40XX_VTU_FUNC1_OP_PURGE 3
++#define AR40XX_VTU_FUNC1_OP_REMOVE_PORT 4
++#define AR40XX_VTU_FUNC1_OP_GET_NEXT 5
++#define AR40XX7_VTU_FUNC1_OP_GET_ONE 6
++#define AR40XX_VTU_FUNC1_FULL BIT(4)
++#define AR40XX_VTU_FUNC1_PORT BIT(8, 4)
++#define AR40XX_VTU_FUNC1_PORT_S 8
++#define AR40XX_VTU_FUNC1_VID BIT(16, 12)
++#define AR40XX_VTU_FUNC1_VID_S 16
++#define AR40XX_VTU_FUNC1_BUSY BIT(31)
++
++#define AR40XX_REG_FWD_CTRL0 0x620
++#define AR40XX_FWD_CTRL0_CPU_PORT_EN BIT(10)
++#define AR40XX_FWD_CTRL0_MIRROR_PORT BITS(4, 4)
++#define AR40XX_FWD_CTRL0_MIRROR_PORT_S 4
++
++#define AR40XX_REG_FWD_CTRL1 0x624
++#define AR40XX_FWD_CTRL1_UC_FLOOD BITS(0, 7)
++#define AR40XX_FWD_CTRL1_UC_FLOOD_S 0
++#define AR40XX_FWD_CTRL1_MC_FLOOD BITS(8, 7)
++#define AR40XX_FWD_CTRL1_MC_FLOOD_S 8
++#define AR40XX_FWD_CTRL1_BC_FLOOD BITS(16, 7)
++#define AR40XX_FWD_CTRL1_BC_FLOOD_S 16
++#define AR40XX_FWD_CTRL1_IGMP BITS(24, 7)
++#define AR40XX_FWD_CTRL1_IGMP_S 24
++
++#define AR40XX_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc)
++#define AR40XX_PORT_LOOKUP_MEMBER BITS(0, 7)
++#define AR40XX_PORT_LOOKUP_IN_MODE BITS(8, 2)
++#define AR40XX_PORT_LOOKUP_IN_MODE_S 8
++#define AR40XX_PORT_LOOKUP_STATE BITS(16, 3)
++#define AR40XX_PORT_LOOKUP_STATE_S 16
++#define AR40XX_PORT_LOOKUP_LEARN BIT(20)
++#define AR40XX_PORT_LOOKUP_LOOPBACK BIT(21)
++#define AR40XX_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
++
++#define AR40XX_REG_ATU_FUNC 0x60c
++#define AR40XX_ATU_FUNC_OP BITS(0, 4)
++#define AR40XX_ATU_FUNC_OP_NOOP 0x0
++#define AR40XX_ATU_FUNC_OP_FLUSH 0x1
++#define AR40XX_ATU_FUNC_OP_LOAD 0x2
++#define AR40XX_ATU_FUNC_OP_PURGE 0x3
++#define AR40XX_ATU_FUNC_OP_FLUSH_LOCKED 0x4
++#define AR40XX_ATU_FUNC_OP_FLUSH_UNICAST 0x5
++#define AR40XX_ATU_FUNC_OP_GET_NEXT 0x6
++#define AR40XX_ATU_FUNC_OP_SEARCH_MAC 0x7
++#define AR40XX_ATU_FUNC_OP_CHANGE_TRUNK 0x8
++#define AR40XX_ATU_FUNC_BUSY BIT(31)
++
++#define AR40XX_REG_QM_DEBUG_ADDR 0x820
++#define AR40XX_REG_QM_DEBUG_VALUE 0x824
++#define AR40XX_REG_QM_PORT0_3_QNUM 0x1d
++#define AR40XX_REG_QM_PORT4_6_QNUM 0x1e
++
++#define AR40XX_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
++#define AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
++
++#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i) (0x9b0 + (_i) * 0x4)
++#define AR40XX_PORT0_FC_THRESH_ON_DFLT 0x60
++#define AR40XX_PORT0_FC_THRESH_OFF_DFLT 0x90
++
++#define AR40XX_PHY_DEBUG_0 0
++#define AR40XX_PHY_MANU_CTRL_EN BIT(12)
++
++#define AR40XX_PHY_DEBUG_2 2
++
++#define AR40XX_PHY_SPEC_STATUS 0x11
++#define AR40XX_PHY_SPEC_STATUS_LINK BIT(10)
++#define AR40XX_PHY_SPEC_STATUS_DUPLEX BIT(13)
++#define AR40XX_PHY_SPEC_STATUS_SPEED BITS(14, 2)
++
++/* port forwarding state */
++enum {
++ AR40XX_PORT_STATE_DISABLED = 0,
++ AR40XX_PORT_STATE_BLOCK = 1,
++ AR40XX_PORT_STATE_LISTEN = 2,
++ AR40XX_PORT_STATE_LEARN = 3,
++ AR40XX_PORT_STATE_FORWARD = 4
++};
++
++/* ingress 802.1q mode */
++enum {
++ AR40XX_IN_PORT_ONLY = 0,
++ AR40XX_IN_PORT_FALLBACK = 1,
++ AR40XX_IN_VLAN_ONLY = 2,
++ AR40XX_IN_SECURE = 3
++};
++
++/* egress 802.1q mode */
++enum {
++ AR40XX_OUT_KEEP = 0,
++ AR40XX_OUT_STRIP_VLAN = 1,
++ AR40XX_OUT_ADD_VLAN = 2
++};
++
++/* port speed */
++enum {
++ AR40XX_PORT_SPEED_10M = 0,
++ AR40XX_PORT_SPEED_100M = 1,
++ AR40XX_PORT_SPEED_1000M = 2,
++ AR40XX_PORT_SPEED_ERR = 3,
++};
++
++#define AR40XX_MIB_WORK_DELAY 2000 /* msecs */
++
++#define AR40XX_QM_WORK_DELAY 100
++
++#define AR40XX_MIB_FUNC_CAPTURE 0x3
++
++#define AR40XX_REG_PORT_STATS_START 0x1000
++#define AR40XX_REG_PORT_STATS_LEN 0x100
++
++#define AR40XX_PORTS_ALL 0x3f
++
++#define AR40XX_PSGMII_ID 5
++#define AR40XX_PSGMII_CALB_NUM 100
++#define AR40XX_MALIBU_PSGMII_MODE_CTRL 0x6d
++#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL 0x220c
++#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL 0x801a
++#define AR40XX_MALIBU_DAC_CTRL_MASK 0x380
++#define AR40XX_MALIBU_DAC_CTRL_VALUE 0x280
++#define AR40XX_MALIBU_PHY_RLP_CTRL 0x805a
++#define AR40XX_PSGMII_TX_DRIVER_1_CTRL 0xb
++#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP 0x8a
++#define AR40XX_MALIBU_PHY_LAST_ADDR 4
++
++static inline struct ar40xx_priv *
++swdev_to_ar40xx(struct switch_dev *swdev)
++{
++ return container_of(swdev, struct ar40xx_priv, dev);
++}
++
++#endif
+--- /dev/null
++++ b/drivers/net/phy/mdio-ipq40xx.c
+@@ -0,0 +1,203 @@
++/*
++ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for
++ * any purpose with or without fee is hereby granted, provided that the
++ * above copyright notice and this permission notice appear in all copies.
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/delay.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/io.h>
++#include <linux/of_address.h>
++#include <linux/of_mdio.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++
++#define MDIO_CTRL_0_REG 0x40
++#define MDIO_CTRL_1_REG 0x44
++#define MDIO_CTRL_2_REG 0x48
++#define MDIO_CTRL_3_REG 0x4c
++#define MDIO_CTRL_4_REG 0x50
++#define MDIO_CTRL_4_ACCESS_BUSY BIT(16)
++#define MDIO_CTRL_4_ACCESS_START BIT(8)
++#define MDIO_CTRL_4_ACCESS_CODE_READ 0
++#define MDIO_CTRL_4_ACCESS_CODE_WRITE 1
++#define CTRL_0_REG_DEFAULT_VALUE 0x150FF
++
++#define IPQ40XX_MDIO_RETRY 1000
++#define IPQ40XX_MDIO_DELAY 10
++
++struct ipq40xx_mdio_data {
++ struct mii_bus *mii_bus;
++ void __iomem *membase;
++ int phy_irq[PHY_MAX_ADDR];
++ struct device *dev;
++};
++
++static int ipq40xx_mdio_wait_busy(struct ipq40xx_mdio_data *am)
++{
++ int i;
++
++ for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) {
++ unsigned int busy;
++
++ busy = readl(am->membase + MDIO_CTRL_4_REG) &
++ MDIO_CTRL_4_ACCESS_BUSY;
++ if (!busy)
++ return 0;
++
++ /* BUSY might take to be cleard by 15~20 times of loop */
++ udelay(IPQ40XX_MDIO_DELAY);
++ }
++
++ dev_err(am->dev, "%s: MDIO operation timed out\n", am->mii_bus->name);
++
++ return -ETIMEDOUT;
++}
++
++static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
++{
++ struct ipq40xx_mdio_data *am = bus->priv;
++ int value = 0;
++ unsigned int cmd = 0;
++
++ lockdep_assert_held(&bus->mdio_lock);
++
++ if (ipq40xx_mdio_wait_busy(am))
++ return -ETIMEDOUT;
++
++ /* issue the phy address and reg */
++ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
++
++ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_READ;
++
++ /* issue read command */
++ writel(cmd, am->membase + MDIO_CTRL_4_REG);
++
++ /* Wait read complete */
++ if (ipq40xx_mdio_wait_busy(am))
++ return -ETIMEDOUT;
++
++ /* Read data */
++ value = readl(am->membase + MDIO_CTRL_3_REG);
++
++ return value;
++}
++
++static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++ u16 value)
++{
++ struct ipq40xx_mdio_data *am = bus->priv;
++ unsigned int cmd = 0;
++
++ lockdep_assert_held(&bus->mdio_lock);
++
++ if (ipq40xx_mdio_wait_busy(am))
++ return -ETIMEDOUT;
++
++ /* issue the phy address and reg */
++ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
++
++ /* issue write data */
++ writel(value, am->membase + MDIO_CTRL_2_REG);
++
++ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_WRITE;
++ /* issue write command */
++ writel(cmd, am->membase + MDIO_CTRL_4_REG);
++
++ /* Wait write complete */
++ if (ipq40xx_mdio_wait_busy(am))
++ return -ETIMEDOUT;
++
++ return 0;
++}
++
++static int ipq40xx_mdio_probe(struct platform_device *pdev)
++{
++ struct ipq40xx_mdio_data *am;
++ struct resource *res;
++ int i;
++
++ am = devm_kzalloc(&pdev->dev, sizeof(*am), GFP_KERNEL);
++ if (!am)
++ return -ENOMEM;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "no iomem resource found\n");
++ return -ENXIO;
++ }
++
++ am->membase = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(am->membase)) {
++ dev_err(&pdev->dev, "unable to ioremap registers\n");
++ return PTR_ERR(am->membase);
++ }
++
++ am->mii_bus = devm_mdiobus_alloc(&pdev->dev);
++ if (!am->mii_bus)
++ return -ENOMEM;
++
++ writel(CTRL_0_REG_DEFAULT_VALUE, am->membase + MDIO_CTRL_0_REG);
++
++ am->mii_bus->name = "ipq40xx_mdio";
++ am->mii_bus->read = ipq40xx_mdio_read;
++ am->mii_bus->write = ipq40xx_mdio_write;
++ memcpy(am->mii_bus->irq, am->phy_irq, sizeof(am->phy_irq));
++ am->mii_bus->priv = am;
++ am->mii_bus->parent = &pdev->dev;
++ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
++
++ for (i = 0; i < PHY_MAX_ADDR; i++)
++ am->phy_irq[i] = PHY_POLL;
++
++ am->dev = &pdev->dev;
++ platform_set_drvdata(pdev, am);
++
++ /* edma_axi_probe() use "am" drvdata.
++ * ipq40xx_mdio_probe() must be called first.
++ */
++ return of_mdiobus_register(am->mii_bus, pdev->dev.of_node);
++}
++
++static int ipq40xx_mdio_remove(struct platform_device *pdev)
++{
++ struct ipq40xx_mdio_data *am = platform_get_drvdata(pdev);
++
++ mdiobus_unregister(am->mii_bus);
++ return 0;
++}
++
++static const struct of_device_id ipq40xx_mdio_dt_ids[] = {
++ { .compatible = "qcom,ipq4019-mdio" },
++ { }
++};
++MODULE_DEVICE_TABLE(of, ipq40xx_mdio_dt_ids);
++
++static struct platform_driver ipq40xx_mdio_driver = {
++ .probe = ipq40xx_mdio_probe,
++ .remove = ipq40xx_mdio_remove,
++ .driver = {
++ .name = "ipq40xx-mdio",
++ .of_match_table = ipq40xx_mdio_dt_ids,
++ },
++};
++
++module_platform_driver(ipq40xx_mdio_driver);
++
++#define DRV_VERSION "1.0"
++
++MODULE_DESCRIPTION("IPQ40XX MDIO interface driver");
++MODULE_AUTHOR("Qualcomm Atheros");
++MODULE_VERSION(DRV_VERSION);
++MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch
new file mode 100644
index 0000000000..d19be27163
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch
@@ -0,0 +1,52 @@
+From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 20 Nov 2016 01:10:33 +0100
+Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
+
+This patch adds the mdio device-tree node.
+This is where the switch is connected to, so it's needed
+for the ethernet interfaces.
+
+Note: The driver isn't anywhere close to be upstream,
+so the info might change.
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -321,6 +321,34 @@
+ reg = <0x4ab000 0x4>;
+ };
+
++ mdio@90000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "qcom,ipq4019-mdio";
++ reg = <0x90000 0x64>;
++ status = "disabled";
++
++ ethernet-phy@0 {
++ reg = <0>;
++ };
++
++ ethernet-phy@1 {
++ reg = <1>;
++ };
++
++ ethernet-phy@2 {
++ reg = <2>;
++ };
++
++ ethernet-phy@3 {
++ reg = <3>;
++ };
++
++ ethernet-phy@4 {
++ reg = <4>;
++ };
++ };
++
+ usb3_ss_phy: ssphy@9a000 {
+ compatible = "qca,uni-ssphy";
+ reg = <0x9a000 0x800>;
diff --git a/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch
new file mode 100644
index 0000000000..b1b18b46de
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch
@@ -0,0 +1,46 @@
+From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 20 Nov 2016 02:20:54 +0100
+Subject: [PATCH] dts: ipq4019: add PHY/switch nodes
+
+This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii"
+nodes which are needed for the ar40xx.c driver to initialize the
+switch.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++
+ 1 file changed, 23 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -349,6 +349,29 @@
+ };
+ };
+
++ ess-switch@c000000 {
++ compatible = "qcom,ess-switch";
++ reg = <0xc000000 0x80000>;
++ switch_access_mode = "local bus";
++ resets = <&gcc ESS_RESET>;
++ reset-names = "ess_rst";
++ clocks = <&gcc GCC_ESS_CLK>;
++ clock-names = "ess_clk";
++ switch_cpu_bmp = <0x1>;
++ switch_lan_bmp = <0x1e>;
++ switch_wan_bmp = <0x20>;
++ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */
++ switch_initvlas = <0x7c 0x54>;
++ status = "disabled";
++ };
++
++ ess-psgmii@98000 {
++ compatible = "qcom,ess-psgmii";
++ reg = <0x98000 0x800>;
++ psgmii_access_mode = "local bus";
++ status = "disabled";
++ };
++
+ usb3_ss_phy: ssphy@9a000 {
+ compatible = "qca,uni-ssphy";
+ reg = <0x9a000 0x800>;
diff --git a/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch
new file mode 100644
index 0000000000..eb84124b54
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch
@@ -0,0 +1,4602 @@
+From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Thu, 19 Jan 2017 02:01:31 +0100
+Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++
+ drivers/net/ethernet/qualcomm/Makefile | 1 +
+ 2 files changed, 10 insertions(+)
+
+--- a/drivers/net/ethernet/qualcomm/Kconfig
++++ b/drivers/net/ethernet/qualcomm/Kconfig
+@@ -37,4 +37,13 @@ config QCOM_EMAC
+ low power, Receive-Side Scaling (RSS), and IEEE 1588-2008
+ Precision Clock Synchronization Protocol.
+
++config ESSEDMA
++ tristate "Qualcomm Atheros ESS Edma support"
++ ---help---
++ This driver supports ethernet edma adapter.
++ Say Y to build this driver.
++
++ To compile this driver as a module, choose M here. The module
++ will be called essedma.ko.
++
+ endif # NET_VENDOR_QUALCOMM
+--- a/drivers/net/ethernet/qualcomm/Makefile
++++ b/drivers/net/ethernet/qualcomm/Makefile
+@@ -6,3 +6,4 @@ obj-$(CONFIG_QCA7000) += qcaspi.o
+ qcaspi-objs := qca_spi.o qca_framing.o qca_7k.o qca_debug.o
+
+ obj-y += emac/
++obj-$(CONFIG_ESSEDMA) += essedma/
+--- /dev/null
++++ b/drivers/net/ethernet/qualcomm/essedma/Makefile
+@@ -0,0 +1,9 @@
++#
++## Makefile for the Qualcomm Atheros ethernet edma driver
++#
++
++
++obj-$(CONFIG_ESSEDMA) += essedma.o
++
++essedma-objs := edma_axi.o edma.o edma_ethtool.o
++
+--- /dev/null
++++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
+@@ -0,0 +1,2168 @@
++/*
++ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for
++ * any purpose with or without fee is hereby granted, provided that the
++ * above copyright notice and this permission notice appear in all copies.
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/if_vlan.h>
++#include "ess_edma.h"
++#include "edma.h"
++
++extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
++bool edma_stp_rstp;
++u16 edma_ath_eth_type;
++
++/* edma_skb_priority_offset()
++ * get edma skb priority
++ */
++static unsigned int edma_skb_priority_offset(struct sk_buff *skb)
++{
++ return (skb->priority >> 2) & 1;
++}
++
++/* edma_alloc_tx_ring()
++ * Allocate Tx descriptors ring
++ */
++static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo,
++ struct edma_tx_desc_ring *etdr)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++
++ /* Initialize ring */
++ etdr->size = sizeof(struct edma_sw_desc) * etdr->count;
++ etdr->sw_next_to_fill = 0;
++ etdr->sw_next_to_clean = 0;
++
++ /* Allocate SW descriptors */
++ etdr->sw_desc = vzalloc(etdr->size);
++ if (!etdr->sw_desc) {
++ dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr);
++ return -ENOMEM;
++ }
++
++ /* Allocate HW descriptors */
++ etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma,
++ GFP_KERNEL);
++ if (!etdr->hw_desc) {
++ dev_err(&pdev->dev, "descriptor allocation for tx ring failed");
++ vfree(etdr->sw_desc);
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++/* edma_free_tx_ring()
++ * Free tx rings allocated by edma_alloc_tx_rings
++ */
++static void edma_free_tx_ring(struct edma_common_info *edma_cinfo,
++ struct edma_tx_desc_ring *etdr)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++
++ if (likely(etdr->dma))
++ dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc,
++ etdr->dma);
++
++ vfree(etdr->sw_desc);
++ etdr->sw_desc = NULL;
++}
++
++/* edma_alloc_rx_ring()
++ * allocate rx descriptor ring
++ */
++static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo,
++ struct edma_rfd_desc_ring *erxd)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++
++ erxd->size = sizeof(struct edma_sw_desc) * erxd->count;
++ erxd->sw_next_to_fill = 0;
++ erxd->sw_next_to_clean = 0;
++
++ /* Allocate SW descriptors */
++ erxd->sw_desc = vzalloc(erxd->size);
++ if (!erxd->sw_desc)
++ return -ENOMEM;
++
++ /* Alloc HW descriptors */
++ erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma,
++ GFP_KERNEL);
++ if (!erxd->hw_desc) {
++ vfree(erxd->sw_desc);
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++/* edma_free_rx_ring()
++ * Free rx ring allocated by alloc_rx_ring
++ */
++static void edma_free_rx_ring(struct edma_common_info *edma_cinfo,
++ struct edma_rfd_desc_ring *rxdr)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++
++ if (likely(rxdr->dma))
++ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc,
++ rxdr->dma);
++
++ vfree(rxdr->sw_desc);
++ rxdr->sw_desc = NULL;
++}
++
++/* edma_configure_tx()
++ * Configure transmission control data
++ */
++static void edma_configure_tx(struct edma_common_info *edma_cinfo)
++{
++ u32 txq_ctrl_data;
++
++ txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT);
++ txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN;
++ txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT);
++ edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data);
++}
++
++
++/* edma_configure_rx()
++ * configure reception control data
++ */
++static void edma_configure_rx(struct edma_common_info *edma_cinfo)
++{
++ struct edma_hw *hw = &edma_cinfo->hw;
++ u32 rss_type, rx_desc1, rxq_ctrl_data;
++
++ /* Set RSS type */
++ rss_type = hw->rss_type;
++ edma_write_reg(EDMA_REG_RSS_TYPE, rss_type);
++
++ /* Set RFD burst number */
++ rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT);
++
++ /* Set RFD prefetch threshold */
++ rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT);
++
++ /* Set RFD in host ring low threshold to generte interrupt */
++ rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT);
++ edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1);
++
++ /* Set Rx FIFO threshold to start to DMA data to host */
++ rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
++
++ /* Set RX remove vlan bit */
++ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
++
++ edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
++}
++
++/* edma_alloc_rx_buf()
++ * does skb allocation for the received packets.
++ */
++static int edma_alloc_rx_buf(struct edma_common_info
++ *edma_cinfo,
++ struct edma_rfd_desc_ring *erdr,
++ int cleaned_count, int queue_id)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++ struct edma_rx_free_desc *rx_desc;
++ struct edma_sw_desc *sw_desc;
++ struct sk_buff *skb;
++ unsigned int i;
++ u16 prod_idx, length;
++ u32 reg_data;
++
++ if (cleaned_count > erdr->count) {
++ dev_err(&pdev->dev, "Incorrect cleaned_count %d",
++ cleaned_count);
++ return -1;
++ }
++
++ i = erdr->sw_next_to_fill;
++
++ while (cleaned_count) {
++ sw_desc = &erdr->sw_desc[i];
++ length = edma_cinfo->rx_head_buffer_len;
++
++ if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
++ skb = sw_desc->skb;
++ } else {
++ /* alloc skb */
++ skb = netdev_alloc_skb(edma_netdev[0], length);
++ if (!skb) {
++ /* Better luck next round */
++ break;
++ }
++ }
++
++ if (edma_cinfo->page_mode) {
++ struct page *pg = alloc_page(GFP_ATOMIC);
++
++ if (!pg) {
++ dev_kfree_skb_any(skb);
++ break;
++ }
++
++ sw_desc->dma = dma_map_page(&pdev->dev, pg, 0,
++ edma_cinfo->rx_page_buffer_len,
++ DMA_FROM_DEVICE);
++ if (dma_mapping_error(&pdev->dev,
++ sw_desc->dma)) {
++ __free_page(pg);
++ dev_kfree_skb_any(skb);
++ break;
++ }
++
++ skb_fill_page_desc(skb, 0, pg, 0,
++ edma_cinfo->rx_page_buffer_len);
++ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG;
++ sw_desc->length = edma_cinfo->rx_page_buffer_len;
++ } else {
++ sw_desc->dma = dma_map_single(&pdev->dev, skb->data,
++ length, DMA_FROM_DEVICE);
++ if (dma_mapping_error(&pdev->dev,
++ sw_desc->dma)) {
++ dev_kfree_skb_any(skb);
++ break;
++ }
++
++ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD;
++ sw_desc->length = length;
++ }
++
++ /* Update the buffer info */
++ sw_desc->skb = skb;
++ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]);
++ rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma);
++ if (++i == erdr->count)
++ i = 0;
++ cleaned_count--;
++ }
++
++ erdr->sw_next_to_fill = i;
++
++ if (i == 0)
++ prod_idx = erdr->count - 1;
++ else
++ prod_idx = i - 1;
++
++ /* Update the producer index */
++ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &reg_data);
++ reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
++ reg_data |= prod_idx;
++ edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
++ return cleaned_count;
++}
++
++/* edma_init_desc()
++ * update descriptor ring size, buffer and producer/consumer index
++ */
++static void edma_init_desc(struct edma_common_info *edma_cinfo)
++{
++ struct edma_rfd_desc_ring *rfd_ring;
++ struct edma_tx_desc_ring *etdr;
++ int i = 0, j = 0;
++ u32 data = 0;
++ u16 hw_cons_idx = 0;
++
++ /* Set the base address of every TPD ring. */
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
++ etdr = edma_cinfo->tpd_ring[i];
++
++ /* Update descriptor ring base address */
++ edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma);
++ edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data);
++
++ /* Calculate hardware consumer index */
++ hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff;
++ etdr->sw_next_to_fill = hw_cons_idx;
++ etdr->sw_next_to_clean = hw_cons_idx;
++ data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT);
++ data |= hw_cons_idx;
++
++ /* update producer index */
++ edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data);
++
++ /* update SW consumer index register */
++ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx);
++
++ /* Set TPD ring size */
++ edma_write_reg(EDMA_REG_TPD_RING_SIZE,
++ edma_cinfo->tx_ring_count &
++ EDMA_TPD_RING_SIZE_MASK);
++ }
++
++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
++ rfd_ring = edma_cinfo->rfd_ring[j];
++ /* Update Receive Free descriptor ring base address */
++ edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j),
++ (u32)(rfd_ring->dma));
++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
++ }
++
++ data = edma_cinfo->rx_head_buffer_len;
++ if (edma_cinfo->page_mode)
++ data = edma_cinfo->rx_page_buffer_len;
++
++ data &= EDMA_RX_BUF_SIZE_MASK;
++ data <<= EDMA_RX_BUF_SIZE_SHIFT;
++
++ /* Update RFD ring size and RX buffer size */
++ data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK)
++ << EDMA_RFD_RING_SIZE_SHIFT;
++
++ edma_write_reg(EDMA_REG_RX_DESC0, data);
++
++ /* Disable TX FIFO low watermark and high watermark */
++ edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0);
++
++ /* Load all of base address above */
++ edma_read_reg(EDMA_REG_TX_SRAM_PART, &data);
++ data |= 1 << EDMA_LOAD_PTR_SHIFT;
++ edma_write_reg(EDMA_REG_TX_SRAM_PART, data);
++}
++
++/* edma_receive_checksum
++ * Api to check checksum on receive packets
++ */
++static void edma_receive_checksum(struct edma_rx_return_desc *rd,
++ struct sk_buff *skb)
++{
++ skb_checksum_none_assert(skb);
++
++ /* check the RRD IP/L4 checksum bit to see if
++ * its set, which in turn indicates checksum
++ * failure.
++ */
++ if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK)
++ return;
++
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++}
++
++/* edma_clean_rfd()
++ * clean up rx resourcers on error
++ */
++static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index)
++{
++ struct edma_rx_free_desc *rx_desc;
++ struct edma_sw_desc *sw_desc;
++
++ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]);
++ sw_desc = &erdr->sw_desc[index];
++ if (sw_desc->skb) {
++ dev_kfree_skb_any(sw_desc->skb);
++ sw_desc->skb = NULL;
++ }
++
++ memset(rx_desc, 0, sizeof(struct edma_rx_free_desc));
++}
++
++/* edma_rx_complete_fraglist()
++ * Complete Rx processing for fraglist skbs
++ */
++static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd)
++{
++ int i;
++ u32 priority;
++ u16 port_type;
++ u8 mac_addr[EDMA_ETH_HDR_LEN];
++
++ port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT)
++ & EDMA_RRD_PORT_TYPE_MASK;
++ /* if port type is 0x4, then only proceed with
++ * other stp/rstp calculation
++ */
++ if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) {
++ u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00};
++
++ /* calculate the frame priority */
++ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
++ & EDMA_RRD_PRIORITY_MASK;
++
++ for (i = 0; i < EDMA_ETH_HDR_LEN; i++)
++ mac_addr[i] = skb->data[i];
++
++ /* Check if destination mac addr is bpdu addr */
++ if (!memcmp(mac_addr, bpdu_mac, 6)) {
++ /* destination mac address is BPDU
++ * destination mac address, then add
++ * atheros header to the packet.
++ */
++ u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) |
++ (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) |
++ (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id;
++ skb_push(skb, 4);
++ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
++ *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type);
++ *(uint16_t *)&skb->data[14] = htons(athr_hdr);
++ }
++ }
++}
++
++/*
++ * edma_rx_complete_fraglist()
++ * Complete Rx processing for fraglist skbs
++ */
++static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
++ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++ struct edma_hw *hw = &edma_cinfo->hw;
++ struct sk_buff *skb_temp;
++ struct edma_sw_desc *sw_desc;
++ int i;
++ u16 size_remaining;
++
++ skb->data_len = 0;
++ skb->tail += (hw->rx_head_buff_size - 16);
++ skb->len = skb->truesize = length;
++ size_remaining = length - (hw->rx_head_buff_size - 16);
++
++ /* clean-up all related sw_descs */
++ for (i = 1; i < num_rfds; i++) {
++ struct sk_buff *skb_prev;
++ sw_desc = &erdr->sw_desc[sw_next_to_clean];
++ skb_temp = sw_desc->skb;
++
++ dma_unmap_single(&pdev->dev, sw_desc->dma,
++ sw_desc->length, DMA_FROM_DEVICE);
++
++ if (size_remaining < hw->rx_head_buff_size)
++ skb_put(skb_temp, size_remaining);
++ else
++ skb_put(skb_temp, hw->rx_head_buff_size);
++
++ /*
++ * If we are processing the first rfd, we link
++ * skb->frag_list to the skb corresponding to the
++ * first RFD
++ */
++ if (i == 1)
++ skb_shinfo(skb)->frag_list = skb_temp;
++ else
++ skb_prev->next = skb_temp;
++ skb_prev = skb_temp;
++ skb_temp->next = NULL;
++
++ skb->data_len += skb_temp->len;
++ size_remaining -= skb_temp->len;
++
++ /* Increment SW index */
++ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
++ (*cleaned_count)++;
++ }
++
++ return sw_next_to_clean;
++}
++
++/* edma_rx_complete_paged()
++ * Complete Rx processing for paged skbs
++ */
++static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
++ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++ struct sk_buff *skb_temp;
++ struct edma_sw_desc *sw_desc;
++ int i;
++ u16 size_remaining;
++
++ skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
++
++ /* Setup skbuff fields */
++ skb->len = length;
++
++ if (likely(num_rfds <= 1)) {
++ skb->data_len = length;
++ skb->truesize += edma_cinfo->rx_page_buffer_len;
++ skb_fill_page_desc(skb, 0, skb_frag_page(frag),
++ 16, length);
++ } else {
++ frag->size -= 16;
++ skb->data_len = frag->size;
++ skb->truesize += edma_cinfo->rx_page_buffer_len;
++ size_remaining = length - frag->size;
++
++ skb_fill_page_desc(skb, 0, skb_frag_page(frag),
++ 16, frag->size);
++
++ /* clean-up all related sw_descs */
++ for (i = 1; i < num_rfds; i++) {
++ sw_desc = &erdr->sw_desc[sw_next_to_clean];
++ skb_temp = sw_desc->skb;
++ frag = &skb_shinfo(skb_temp)->frags[0];
++ dma_unmap_page(&pdev->dev, sw_desc->dma,
++ sw_desc->length, DMA_FROM_DEVICE);
++
++ if (size_remaining < edma_cinfo->rx_page_buffer_len)
++ frag->size = size_remaining;
++
++ skb_fill_page_desc(skb, i, skb_frag_page(frag),
++ 0, frag->size);
++
++ skb_shinfo(skb_temp)->nr_frags = 0;
++ dev_kfree_skb_any(skb_temp);
++
++ skb->data_len += frag->size;
++ skb->truesize += edma_cinfo->rx_page_buffer_len;
++ size_remaining -= frag->size;
++
++ /* Increment SW index */
++ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
++ (*cleaned_count)++;
++ }
++ }
++
++ return sw_next_to_clean;
++}
++
++/*
++ * edma_rx_complete()
++ * Main api called from the poll function to process rx packets.
++ */
++static void edma_rx_complete(struct edma_common_info *edma_cinfo,
++ int *work_done, int work_to_do, int queue_id,
++ struct napi_struct *napi)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++ struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id];
++ struct net_device *netdev;
++ struct edma_adapter *adapter;
++ struct edma_sw_desc *sw_desc;
++ struct sk_buff *skb;
++ struct edma_rx_return_desc *rd;
++ u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1,
++ sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0;
++ u32 data = 0;
++ u8 *vaddr;
++ int port_id, i, drop_count = 0;
++ u32 priority;
++ u16 count = erdr->count, rfd_avail;
++ u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
++
++ sw_next_to_clean = erdr->sw_next_to_clean;
++
++ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
++ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
++ EDMA_RFD_CONS_IDX_MASK;
++
++ do {
++ while (sw_next_to_clean != hw_next_to_clean) {
++ if (!work_to_do)
++ break;
++
++ sw_desc = &erdr->sw_desc[sw_next_to_clean];
++ skb = sw_desc->skb;
++
++ /* Unmap the allocated buffer */
++ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD))
++ dma_unmap_single(&pdev->dev, sw_desc->dma,
++ sw_desc->length, DMA_FROM_DEVICE);
++ else
++ dma_unmap_page(&pdev->dev, sw_desc->dma,
++ sw_desc->length, DMA_FROM_DEVICE);
++
++ /* Get RRD */
++ if (edma_cinfo->page_mode) {
++ vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0]));
++ memcpy((uint8_t *)&rrd[0], vaddr, 16);
++ rd = (struct edma_rx_return_desc *)rrd;
++ kunmap_atomic(vaddr);
++ } else {
++ rd = (struct edma_rx_return_desc *)skb->data;
++ }
++
++ /* Check if RRD is valid */
++ if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) {
++ edma_clean_rfd(erdr, sw_next_to_clean);
++ sw_next_to_clean = (sw_next_to_clean + 1) &
++ (erdr->count - 1);
++ cleaned_count++;
++ continue;
++ }
++
++ /* Get the number of RFDs from RRD */
++ num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK;
++
++ /* Get Rx port ID from switch */
++ port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK;
++ if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) {
++ dev_err(&pdev->dev, "Invalid RRD source port bit set");
++ for (i = 0; i < num_rfds; i++) {
++ edma_clean_rfd(erdr, sw_next_to_clean);
++ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
++ cleaned_count++;
++ }
++ continue;
++ }
++
++ /* check if we have a sink for the data we receive.
++ * If the interface isn't setup, we have to drop the
++ * incoming data for now.
++ */
++ netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id];
++ if (!netdev) {
++ edma_clean_rfd(erdr, sw_next_to_clean);
++ sw_next_to_clean = (sw_next_to_clean + 1) &
++ (erdr->count - 1);
++ cleaned_count++;
++ continue;
++ }
++ adapter = netdev_priv(netdev);
++
++ /* This code is added to handle a usecase where high
++ * priority stream and a low priority stream are
++ * received simultaneously on DUT. The problem occurs
++ * if one of the Rx rings is full and the corresponding
++ * core is busy with other stuff. This causes ESS CPU
++ * port to backpressure all incoming traffic including
++ * high priority one. We monitor free descriptor count
++ * on each CPU and whenever it reaches threshold (< 80),
++ * we drop all low priority traffic and let only high
++ * priotiy traffic pass through. We can hence avoid
++ * ESS CPU port to send backpressure on high priroity
++ * stream.
++ */
++ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
++ & EDMA_RRD_PRIORITY_MASK;
++ if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) {
++ rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1);
++ if (rfd_avail < EDMA_RFD_AVAIL_THR) {
++ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE;
++ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
++ adapter->stats.rx_dropped++;
++ cleaned_count++;
++ drop_count++;
++ if (drop_count == 3) {
++ work_to_do--;
++ (*work_done)++;
++ drop_count = 0;
++ }
++ if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
++ /* If buffer clean count reaches 16, we replenish HW buffers. */
++ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
++ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
++ sw_next_to_clean);
++ cleaned_count = ret_count;
++ }
++ continue;
++ }
++ }
++
++ work_to_do--;
++ (*work_done)++;
++
++ /* Increment SW index */
++ sw_next_to_clean = (sw_next_to_clean + 1) &
++ (erdr->count - 1);
++
++ cleaned_count++;
++
++ /* Get the packet size and allocate buffer */
++ length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK;
++
++ if (edma_cinfo->page_mode) {
++ /* paged skb */
++ sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
++ if (!pskb_may_pull(skb, ETH_HLEN)) {
++ dev_kfree_skb_any(skb);
++ continue;
++ }
++ } else {
++ /* single or fraglist skb */
++
++ /* Addition of 16 bytes is required, as in the packet
++ * first 16 bytes are rrd descriptors, so actual data
++ * starts from an offset of 16.
++ */
++ skb_reserve(skb, 16);
++ if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) {
++ skb_put(skb, length);
++ } else {
++ sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
++ }
++ }
++
++ if (edma_stp_rstp) {
++ edma_rx_complete_stp_rstp(skb, port_id, rd);
++ }
++
++ skb->protocol = eth_type_trans(skb, netdev);
++
++ /* Record Rx queue for RFS/RPS and fill flow hash from HW */
++ skb_record_rx_queue(skb, queue_to_rxid[queue_id]);
++ if (netdev->features & NETIF_F_RXHASH) {
++ hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT);
++ if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END))
++ skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4);
++ }
++
++#ifdef CONFIG_NF_FLOW_COOKIE
++ skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK;
++#endif
++ edma_receive_checksum(rd, skb);
++
++ /* Process VLAN HW acceleration indication provided by HW */
++ if (unlikely(adapter->default_vlan_tag != rd->rrd4)) {
++ vlan = rd->rrd4;
++ if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
++ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
++ else if (rd->rrd1 & EDMA_RRD_SVLAN)
++ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
++ }
++
++ /* Update rx statistics */
++ adapter->stats.rx_packets++;
++ adapter->stats.rx_bytes += length;
++
++ /* Check if we reached refill threshold */
++ if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
++ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
++ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
++ sw_next_to_clean);
++ cleaned_count = ret_count;
++ }
++
++ /* At this point skb should go to stack */
++ napi_gro_receive(napi, skb);
++ }
++
++ /* Check if we still have NAPI budget */
++ if (!work_to_do)
++ break;
++
++ /* Read index once again since we still have NAPI budget */
++ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
++ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
++ EDMA_RFD_CONS_IDX_MASK;
++ } while (hw_next_to_clean != sw_next_to_clean);
++
++ erdr->sw_next_to_clean = sw_next_to_clean;
++
++ /* Refill here in case refill threshold wasn't reached */
++ if (likely(cleaned_count)) {
++ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
++ if (ret_count)
++ dev_dbg(&pdev->dev, "Not all buffers was reallocated");
++ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
++ erdr->sw_next_to_clean);
++ }
++}
++
++/* edma_delete_rfs_filter()
++ * Remove RFS filter from switch
++ */
++static int edma_delete_rfs_filter(struct edma_adapter *adapter,
++ struct edma_rfs_filter_node *filter_node)
++{
++ int res = -1;
++
++ struct flow_keys *keys = &filter_node->keys;
++
++ if (likely(adapter->set_rfs_rule))
++ res = (*adapter->set_rfs_rule)(adapter->netdev,
++ flow_get_u32_src(keys), flow_get_u32_dst(keys),
++ keys->ports.src, keys->ports.dst,
++ keys->basic.ip_proto, filter_node->rq_id, 0);
++
++ return res;
++}
++
++/* edma_add_rfs_filter()
++ * Add RFS filter to switch
++ */
++static int edma_add_rfs_filter(struct edma_adapter *adapter,
++ struct flow_keys *keys, u16 rq,
++ struct edma_rfs_filter_node *filter_node)
++{
++ int res = -1;
++
++ struct flow_keys *dest_keys = &filter_node->keys;
++
++ memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys));
++/*
++ dest_keys->control = keys->control;
++ dest_keys->basic = keys->basic;
++ dest_keys->addrs = keys->addrs;
++ dest_keys->ports = keys->ports;
++ dest_keys.ip_proto = keys->ip_proto;
++*/
++ /* Call callback registered by ESS driver */
++ if (likely(adapter->set_rfs_rule))
++ res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys),
++ flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst,
++ keys->basic.ip_proto, rq, 1);
++
++ return res;
++}
++
++/* edma_rfs_key_search()
++ * Look for existing RFS entry
++ */
++static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h,
++ struct flow_keys *key)
++{
++ struct edma_rfs_filter_node *p;
++
++ hlist_for_each_entry(p, h, node)
++ if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) &&
++ flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) &&
++ p->keys.ports.src == key->ports.src &&
++ p->keys.ports.dst == key->ports.dst &&
++ p->keys.basic.ip_proto == key->basic.ip_proto)
++ return p;
++ return NULL;
++}
++
++/* edma_initialise_rfs_flow_table()
++ * Initialise EDMA RFS flow table
++ */
++static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter)
++{
++ int i;
++
++ spin_lock_init(&adapter->rfs.rfs_ftab_lock);
++
++ /* Initialize EDMA flow hash table */
++ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++)
++ INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]);
++
++ adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES;
++ adapter->rfs.filter_available = adapter->rfs.max_num_filter;
++ adapter->rfs.hashtoclean = 0;
++
++ /* Add timer to get periodic RFS updates from OS */
++ init_timer(&adapter->rfs.expire_rfs);
++ adapter->rfs.expire_rfs.function = edma_flow_may_expire;
++ adapter->rfs.expire_rfs.data = (unsigned long)adapter;
++ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
++}
++
++/* edma_free_rfs_flow_table()
++ * Free EDMA RFS flow table
++ */
++static void edma_free_rfs_flow_table(struct edma_adapter *adapter)
++{
++ int i;
++
++ /* Remove sync timer */
++ del_timer_sync(&adapter->rfs.expire_rfs);
++ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
++
++ /* Free EDMA RFS table entries */
++ adapter->rfs.filter_available = 0;
++
++ /* Clean-up EDMA flow hash table */
++ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) {
++ struct hlist_head *hhead;
++ struct hlist_node *tmp;
++ struct edma_rfs_filter_node *filter_node;
++ int res;
++
++ hhead = &adapter->rfs.hlist_head[i];
++ hlist_for_each_entry_safe(filter_node, tmp, hhead, node) {
++ res = edma_delete_rfs_filter(adapter, filter_node);
++ if (res < 0)
++ dev_warn(&adapter->netdev->dev,
++ "EDMA going down but RFS entry %d not allowed to be flushed by Switch",
++ filter_node->flow_id);
++ hlist_del(&filter_node->node);
++ kfree(filter_node);
++ }
++ }
++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
++}
++
++/* edma_tx_unmap_and_free()
++ * clean TX buffer
++ */
++static inline void edma_tx_unmap_and_free(struct platform_device *pdev,
++ struct edma_sw_desc *sw_desc)
++{
++ struct sk_buff *skb = sw_desc->skb;
++
++ if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) ||
++ (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST)))
++ /* unmap_single for skb head area */
++ dma_unmap_single(&pdev->dev, sw_desc->dma,
++ sw_desc->length, DMA_TO_DEVICE);
++ else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)
++ /* unmap page for paged fragments */
++ dma_unmap_page(&pdev->dev, sw_desc->dma,
++ sw_desc->length, DMA_TO_DEVICE);
++
++ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST))
++ dev_kfree_skb_any(skb);
++
++ sw_desc->flags = 0;
++}
++
++/* edma_tx_complete()
++ * Used to clean tx queues and update hardware and consumer index
++ */
++static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id)
++{
++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
++ struct edma_sw_desc *sw_desc;
++ struct platform_device *pdev = edma_cinfo->pdev;
++ int i;
++
++ u16 sw_next_to_clean = etdr->sw_next_to_clean;
++ u16 hw_next_to_clean;
++ u32 data = 0;
++
++ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data);
++ hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK;
++
++ /* clean the buffer here */
++ while (sw_next_to_clean != hw_next_to_clean) {
++ sw_desc = &etdr->sw_desc[sw_next_to_clean];
++ edma_tx_unmap_and_free(pdev, sw_desc);
++ sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1);
++ }
++
++ etdr->sw_next_to_clean = sw_next_to_clean;
++
++ /* update the TPD consumer index register */
++ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean);
++
++ /* Wake the queue if queue is stopped and netdev link is up */
++ for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) {
++ if (netif_tx_queue_stopped(etdr->nq[i])) {
++ if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i]))
++ netif_tx_wake_queue(etdr->nq[i]);
++ }
++ }
++}
++
++/* edma_get_tx_buffer()
++ * Get sw_desc corresponding to the TPD
++ */
++static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo,
++ struct edma_tx_desc *tpd, int queue_id)
++{
++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
++ return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc];
++}
++
++/* edma_get_next_tpd()
++ * Return a TPD descriptor for transfer
++ */
++static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo,
++ int queue_id)
++{
++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
++ u16 sw_next_to_fill = etdr->sw_next_to_fill;
++ struct edma_tx_desc *tpd_desc =
++ (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]);
++
++ etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1);
++
++ return tpd_desc;
++}
++
++/* edma_tpd_available()
++ * Check number of free TPDs
++ */
++static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo,
++ int queue_id)
++{
++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
++
++ u16 sw_next_to_fill;
++ u16 sw_next_to_clean;
++ u16 count = 0;
++
++ sw_next_to_clean = etdr->sw_next_to_clean;
++ sw_next_to_fill = etdr->sw_next_to_fill;
++
++ if (likely(sw_next_to_clean <= sw_next_to_fill))
++ count = etdr->count;
++
++ return count + sw_next_to_clean - sw_next_to_fill - 1;
++}
++
++/* edma_tx_queue_get()
++ * Get the starting number of the queue
++ */
++static inline int edma_tx_queue_get(struct edma_adapter *adapter,
++ struct sk_buff *skb, int txq_id)
++{
++ /* skb->priority is used as an index to skb priority table
++ * and based on packet priority, correspong queue is assigned.
++ */
++ return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb);
++}
++
++/* edma_tx_update_hw_idx()
++ * update the producer index for the ring transmitted
++ */
++static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo,
++ struct sk_buff *skb, int queue_id)
++{
++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
++ u32 tpd_idx_data;
++
++ /* Read and update the producer index */
++ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data);
++ tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS;
++ tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK)
++ << EDMA_TPD_PROD_IDX_SHIFT;
++
++ edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data);
++}
++
++/* edma_rollback_tx()
++ * Function to retrieve tx resources in case of error
++ */
++static void edma_rollback_tx(struct edma_adapter *adapter,
++ struct edma_tx_desc *start_tpd, int queue_id)
++{
++ struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id];
++ struct edma_sw_desc *sw_desc;
++ struct edma_tx_desc *tpd = NULL;
++ u16 start_index, index;
++
++ start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc);
++
++ index = start_index;
++ while (index != etdr->sw_next_to_fill) {
++ tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]);
++ sw_desc = &etdr->sw_desc[index];
++ edma_tx_unmap_and_free(adapter->pdev, sw_desc);
++ memset(tpd, 0, sizeof(struct edma_tx_desc));
++ if (++index == etdr->count)
++ index = 0;
++ }
++ etdr->sw_next_to_fill = start_index;
++}
++
++/* edma_tx_map_and_fill()
++ * gets called from edma_xmit_frame
++ *
++ * This is where the dma of the buffer to be transmitted
++ * gets mapped
++ */
++static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo,
++ struct edma_adapter *adapter, struct sk_buff *skb, int queue_id,
++ unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap,
++ bool packet_is_rstp, int nr_frags)
++{
++ struct edma_sw_desc *sw_desc = NULL;
++ struct platform_device *pdev = edma_cinfo->pdev;
++ struct edma_tx_desc *tpd = NULL, *start_tpd = NULL;
++ struct sk_buff *iter_skb;
++ int i = 0;
++ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0;
++ u16 buf_len, lso_desc_len = 0;
++
++ /* It should either be a nr_frags skb or fraglist skb but not both */
++ BUG_ON(nr_frags && skb_has_frag_list(skb));
++
++ if (skb_is_gso(skb)) {
++ /* TODO: What additional checks need to be performed here */
++ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
++ lso_word1 |= EDMA_TPD_IPV4_EN;
++ ip_hdr(skb)->check = 0;
++ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr,
++ ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
++ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
++ lso_word1 |= EDMA_TPD_LSO_V2_EN;
++ ipv6_hdr(skb)->payload_len = 0;
++ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
++ &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
++ } else
++ return -EINVAL;
++
++ lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) |
++ (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT);
++ } else if (flags_transmit & EDMA_HW_CHECKSUM) {
++ u8 css, cso;
++ cso = skb_checksum_start_offset(skb);
++ css = cso + skb->csum_offset;
++
++ word1 |= (EDMA_TPD_CUSTOM_CSUM_EN);
++ word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT;
++ word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT);
++ }
++
++ if (skb->protocol == htons(ETH_P_PPP_SES))
++ word1 |= EDMA_TPD_PPPOE_EN;
++
++ if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) {
++ switch(skb->vlan_proto) {
++ case htons(ETH_P_8021Q):
++ word3 |= (1 << EDMA_TX_INS_CVLAN);
++ word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT;
++ break;
++ case htons(ETH_P_8021AD):
++ word1 |= (1 << EDMA_TX_INS_SVLAN);
++ svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT;
++ break;
++ default:
++ dev_err(&pdev->dev, "no ctag or stag present\n");
++ goto vlan_tag_error;
++ }
++ } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) {
++ word3 |= (1 << EDMA_TX_INS_CVLAN);
++ word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT;
++ }
++
++ if (packet_is_rstp) {
++ word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
++ word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT;
++ } else {
++ word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
++ }
++
++ buf_len = skb_headlen(skb);
++
++ if (lso_word1) {
++ if (lso_word1 & EDMA_TPD_LSO_V2_EN) {
++
++ /* IPv6 LSOv2 descriptor */
++ start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id);
++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE;
++
++ /* LSOv2 descriptor overrides addr field to pass length */
++ tpd->addr = cpu_to_le16(skb->len);
++ tpd->svlan_tag = svlan_tag;
++ tpd->word1 = word1 | lso_word1;
++ tpd->word3 = word3;
++ }
++
++ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
++ if (!start_tpd)
++ start_tpd = tpd;
++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
++
++ /* The last buffer info contain the skb address,
++ * so skb will be freed after unmap
++ */
++ sw_desc->length = lso_desc_len;
++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
++
++ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
++ skb->data, buf_len, DMA_TO_DEVICE);
++ if (dma_mapping_error(&pdev->dev, sw_desc->dma))
++ goto dma_error;
++
++ tpd->addr = cpu_to_le32(sw_desc->dma);
++ tpd->len = cpu_to_le16(buf_len);
++
++ tpd->svlan_tag = svlan_tag;
++ tpd->word1 = word1 | lso_word1;
++ tpd->word3 = word3;
++
++ /* The last buffer info contain the skb address,
++ * so it will be freed after unmap
++ */
++ sw_desc->length = lso_desc_len;
++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
++
++ buf_len = 0;
++ }
++
++ if (likely(buf_len)) {
++
++ /* TODO Do not dequeue descriptor if there is a potential error */
++ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
++
++ if (!start_tpd)
++ start_tpd = tpd;
++
++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
++
++ /* The last buffer info contain the skb address,
++ * so it will be free after unmap
++ */
++ sw_desc->length = buf_len;
++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
++ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
++ skb->data, buf_len, DMA_TO_DEVICE);
++ if (dma_mapping_error(&pdev->dev, sw_desc->dma))
++ goto dma_error;
++
++ tpd->addr = cpu_to_le32(sw_desc->dma);
++ tpd->len = cpu_to_le16(buf_len);
++
++ tpd->svlan_tag = svlan_tag;
++ tpd->word1 = word1 | lso_word1;
++ tpd->word3 = word3;
++ }
++
++ /* Walk through all paged fragments */
++ while (nr_frags--) {
++ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
++ buf_len = skb_frag_size(frag);
++ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
++ sw_desc->length = buf_len;
++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG;
++
++ sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE);
++
++ if (dma_mapping_error(NULL, sw_desc->dma))
++ goto dma_error;
++
++ tpd->addr = cpu_to_le32(sw_desc->dma);
++ tpd->len = cpu_to_le16(buf_len);
++
++ tpd->svlan_tag = svlan_tag;
++ tpd->word1 = word1 | lso_word1;
++ tpd->word3 = word3;
++ i++;
++ }
++
++ /* Walk through all fraglist skbs */
++ skb_walk_frags(skb, iter_skb) {
++ buf_len = iter_skb->len;
++ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
++ sw_desc->length = buf_len;
++ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
++ iter_skb->data, buf_len, DMA_TO_DEVICE);
++
++ if (dma_mapping_error(NULL, sw_desc->dma))
++ goto dma_error;
++
++ tpd->addr = cpu_to_le32(sw_desc->dma);
++ tpd->len = cpu_to_le16(buf_len);
++ tpd->svlan_tag = svlan_tag;
++ tpd->word1 = word1 | lso_word1;
++ tpd->word3 = word3;
++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST;
++ }
++
++ if (tpd)
++ tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT;
++
++ sw_desc->skb = skb;
++ sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST;
++
++ return 0;
++
++dma_error:
++ edma_rollback_tx(adapter, start_tpd, queue_id);
++ dev_err(&pdev->dev, "TX DMA map failed\n");
++vlan_tag_error:
++ return -ENOMEM;
++}
++
++/* edma_check_link()
++ * check Link status
++ */
++static int edma_check_link(struct edma_adapter *adapter)
++{
++ struct phy_device *phydev = adapter->phydev;
++
++ if (!(adapter->poll_required))
++ return __EDMA_LINKUP;
++
++ if (phydev->link)
++ return __EDMA_LINKUP;
++
++ return __EDMA_LINKDOWN;
++}
++
++/* edma_adjust_link()
++ * check for edma link status
++ */
++void edma_adjust_link(struct net_device *netdev)
++{
++ int status;
++ struct edma_adapter *adapter = netdev_priv(netdev);
++ struct phy_device *phydev = adapter->phydev;
++
++ if (!test_bit(__EDMA_UP, &adapter->state_flags))
++ return;
++
++ status = edma_check_link(adapter);
++
++ if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
++ dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed);
++ adapter->link_state = __EDMA_LINKUP;
++ netif_carrier_on(netdev);
++ if (netif_running(netdev))
++ netif_tx_wake_all_queues(netdev);
++ } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) {
++ dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name);
++ adapter->link_state = __EDMA_LINKDOWN;
++ netif_carrier_off(netdev);
++ netif_tx_stop_all_queues(netdev);
++ }
++}
++
++/* edma_get_stats()
++ * Statistics api used to retreive the tx/rx statistics
++ */
++struct net_device_stats *edma_get_stats(struct net_device *netdev)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++
++ return &adapter->stats;
++}
++
++/* edma_xmit()
++ * Main api to be called by the core for packet transmission
++ */
++netdev_tx_t edma_xmit(struct sk_buff *skb,
++ struct net_device *net_dev)
++{
++ struct edma_adapter *adapter = netdev_priv(net_dev);
++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
++ struct edma_tx_desc_ring *etdr;
++ u16 from_cpu, dp_bitmap, txq_id;
++ int ret, nr_frags = 0, num_tpds_needed = 1, queue_id;
++ unsigned int flags_transmit = 0;
++ bool packet_is_rstp = false;
++ struct netdev_queue *nq = NULL;
++
++ if (skb_shinfo(skb)->nr_frags) {
++ nr_frags = skb_shinfo(skb)->nr_frags;
++ num_tpds_needed += nr_frags;
++ } else if (skb_has_frag_list(skb)) {
++ struct sk_buff *iter_skb;
++
++ skb_walk_frags(skb, iter_skb)
++ num_tpds_needed++;
++ }
++
++ if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) {
++ dev_err(&net_dev->dev,
++ "skb received with fragments %d which is more than %lu",
++ num_tpds_needed, EDMA_MAX_SKB_FRAGS);
++ dev_kfree_skb_any(skb);
++ adapter->stats.tx_errors++;
++ return NETDEV_TX_OK;
++ }
++
++ if (edma_stp_rstp) {
++ u16 ath_hdr, ath_eth_type;
++ u8 mac_addr[EDMA_ETH_HDR_LEN];
++ ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]);
++ if (ath_eth_type == edma_ath_eth_type) {
++ packet_is_rstp = true;
++ ath_hdr = htons(*(uint16_t *)&skb->data[14]);
++ dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK;
++ from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT;
++ memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN);
++
++ skb_pull(skb, 4);
++
++ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
++ }
++ }
++
++ /* this will be one of the 4 TX queues exposed to linux kernel */
++ txq_id = skb_get_queue_mapping(skb);
++ queue_id = edma_tx_queue_get(adapter, skb, txq_id);
++ etdr = edma_cinfo->tpd_ring[queue_id];
++ nq = netdev_get_tx_queue(net_dev, txq_id);
++
++ local_bh_disable();
++ /* Tx is not handled in bottom half context. Hence, we need to protect
++ * Tx from tasks and bottom half
++ */
++
++ if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) {
++ /* not enough descriptor, just stop queue */
++ netif_tx_stop_queue(nq);
++ local_bh_enable();
++ dev_dbg(&net_dev->dev, "Not enough descriptors available");
++ edma_cinfo->edma_ethstats.tx_desc_error++;
++ return NETDEV_TX_BUSY;
++ }
++
++ /* Check and mark VLAN tag offload */
++ if (skb_vlan_tag_present(skb))
++ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
++ else if (adapter->default_vlan_tag)
++ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
++
++ /* Check and mark checksum offload */
++ if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
++ flags_transmit |= EDMA_HW_CHECKSUM;
++
++ /* Map and fill descriptor for Tx */
++ ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id,
++ flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags);
++ if (ret) {
++ dev_kfree_skb_any(skb);
++ adapter->stats.tx_errors++;
++ goto netdev_okay;
++ }
++
++ /* Update SW producer index */
++ edma_tx_update_hw_idx(edma_cinfo, skb, queue_id);
++
++ /* update tx statistics */
++ adapter->stats.tx_packets++;
++ adapter->stats.tx_bytes += skb->len;
++
++netdev_okay:
++ local_bh_enable();
++ return NETDEV_TX_OK;
++}
++
++/*
++ * edma_flow_may_expire()
++ * Timer function called periodically to delete the node
++ */
++void edma_flow_may_expire(unsigned long data)
++{
++ struct edma_adapter *adapter = (struct edma_adapter *)data;
++ int j;
++
++ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
++ for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) {
++ struct hlist_head *hhead;
++ struct hlist_node *tmp;
++ struct edma_rfs_filter_node *n;
++ bool res;
++
++ hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++];
++ hlist_for_each_entry_safe(n, tmp, hhead, node) {
++ res = rps_may_expire_flow(adapter->netdev, n->rq_id,
++ n->flow_id, n->filter_id);
++ if (res) {
++ int ret;
++ ret = edma_delete_rfs_filter(adapter, n);
++ if (ret < 0)
++ dev_dbg(&adapter->netdev->dev,
++ "RFS entry %d not allowed to be flushed by Switch",
++ n->flow_id);
++ else {
++ hlist_del(&n->node);
++ kfree(n);
++ adapter->rfs.filter_available++;
++ }
++ }
++ }
++ }
++
++ adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1);
++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
++ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
++}
++
++/* edma_rx_flow_steer()
++ * Called by core to to steer the flow to CPU
++ */
++int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
++ u16 rxq, u32 flow_id)
++{
++ struct flow_keys keys;
++ struct edma_rfs_filter_node *filter_node;
++ struct edma_adapter *adapter = netdev_priv(dev);
++ u16 hash_tblid;
++ int res;
++
++ if (skb->protocol == htons(ETH_P_IPV6)) {
++ dev_err(&adapter->pdev->dev, "IPv6 not supported\n");
++ res = -EINVAL;
++ goto no_protocol_err;
++ }
++
++ /* Dissect flow parameters
++ * We only support IPv4 + TCP/UDP
++ */
++ res = skb_flow_dissect_flow_keys(skb, &keys, 0);
++ if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) {
++ res = -EPROTONOSUPPORT;
++ goto no_protocol_err;
++ }
++
++ /* Check if table entry exists */
++ hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK;
++
++ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
++ filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys);
++
++ if (filter_node) {
++ if (rxq == filter_node->rq_id) {
++ res = -EEXIST;
++ goto out;
++ } else {
++ res = edma_delete_rfs_filter(adapter, filter_node);
++ if (res < 0)
++ dev_warn(&adapter->netdev->dev,
++ "Cannot steer flow %d to different queue",
++ filter_node->flow_id);
++ else {
++ adapter->rfs.filter_available++;
++ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
++ if (res < 0) {
++ dev_warn(&adapter->netdev->dev,
++ "Cannot steer flow %d to different queue",
++ filter_node->flow_id);
++ } else {
++ adapter->rfs.filter_available--;
++ filter_node->rq_id = rxq;
++ filter_node->filter_id = res;
++ }
++ }
++ }
++ } else {
++ if (adapter->rfs.filter_available == 0) {
++ res = -EBUSY;
++ goto out;
++ }
++
++ filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC);
++ if (!filter_node) {
++ res = -ENOMEM;
++ goto out;
++ }
++
++ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
++ if (res < 0) {
++ kfree(filter_node);
++ goto out;
++ }
++
++ adapter->rfs.filter_available--;
++ filter_node->rq_id = rxq;
++ filter_node->filter_id = res;
++ filter_node->flow_id = flow_id;
++ filter_node->keys = keys;
++ INIT_HLIST_NODE(&filter_node->node);
++ hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]);
++ }
++
++out:
++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
++no_protocol_err:
++ return res;
++}
++
++/* edma_register_rfs_filter()
++ * Add RFS filter callback
++ */
++int edma_register_rfs_filter(struct net_device *netdev,
++ set_rfs_filter_callback_t set_filter)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++
++ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
++
++ if (adapter->set_rfs_rule) {
++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
++ return -1;
++ }
++
++ adapter->set_rfs_rule = set_filter;
++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
++
++ return 0;
++}
++
++/* edma_alloc_tx_rings()
++ * Allocate rx rings
++ */
++int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++ int i, err = 0;
++
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
++ err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
++ if (err) {
++ dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i);
++ return err;
++ }
++ }
++
++ return 0;
++}
++
++/* edma_free_tx_rings()
++ * Free tx rings
++ */
++void edma_free_tx_rings(struct edma_common_info *edma_cinfo)
++{
++ int i;
++
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
++ edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
++}
++
++/* edma_free_tx_resources()
++ * Free buffers associated with tx rings
++ */
++void edma_free_tx_resources(struct edma_common_info *edma_cinfo)
++{
++ struct edma_tx_desc_ring *etdr;
++ struct edma_sw_desc *sw_desc;
++ struct platform_device *pdev = edma_cinfo->pdev;
++ int i, j;
++
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
++ etdr = edma_cinfo->tpd_ring[i];
++ for (j = 0; j < EDMA_TX_RING_SIZE; j++) {
++ sw_desc = &etdr->sw_desc[j];
++ if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD |
++ EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST))
++ edma_tx_unmap_and_free(pdev, sw_desc);
++ }
++ }
++}
++
++/* edma_alloc_rx_rings()
++ * Allocate rx rings
++ */
++int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo)
++{
++ struct platform_device *pdev = edma_cinfo->pdev;
++ int i, j, err = 0;
++
++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
++ err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
++ if (err) {
++ dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i);
++ return err;
++ }
++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
++ }
++
++ return 0;
++}
++
++/* edma_free_rx_rings()
++ * free rx rings
++ */
++void edma_free_rx_rings(struct edma_common_info *edma_cinfo)
++{
++ int i, j;
++
++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
++ edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
++ }
++}
++
++/* edma_free_queues()
++ * Free the queues allocaated
++ */
++void edma_free_queues(struct edma_common_info *edma_cinfo)
++{
++ int i , j;
++
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
++ if (edma_cinfo->tpd_ring[i])
++ kfree(edma_cinfo->tpd_ring[i]);
++ edma_cinfo->tpd_ring[i] = NULL;
++ }
++
++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
++ if (edma_cinfo->rfd_ring[j])
++ kfree(edma_cinfo->rfd_ring[j]);
++ edma_cinfo->rfd_ring[j] = NULL;
++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
++ }
++
++ edma_cinfo->num_rx_queues = 0;
++ edma_cinfo->num_tx_queues = 0;
++
++ return;
++}
++
++/* edma_free_rx_resources()
++ * Free buffers associated with tx rings
++ */
++void edma_free_rx_resources(struct edma_common_info *edma_cinfo)
++{
++ struct edma_rfd_desc_ring *erdr;
++ struct edma_sw_desc *sw_desc;
++ struct platform_device *pdev = edma_cinfo->pdev;
++ int i, j, k;
++
++ for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) {
++ erdr = edma_cinfo->rfd_ring[k];
++ for (j = 0; j < EDMA_RX_RING_SIZE; j++) {
++ sw_desc = &erdr->sw_desc[j];
++ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) {
++ dma_unmap_single(&pdev->dev, sw_desc->dma,
++ sw_desc->length, DMA_FROM_DEVICE);
++ edma_clean_rfd(erdr, j);
++ } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) {
++ dma_unmap_page(&pdev->dev, sw_desc->dma,
++ sw_desc->length, DMA_FROM_DEVICE);
++ edma_clean_rfd(erdr, j);
++ }
++ }
++ k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
++
++ }
++}
++
++/* edma_alloc_queues_tx()
++ * Allocate memory for all rings
++ */
++int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo)
++{
++ int i;
++
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
++ struct edma_tx_desc_ring *etdr;
++ etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL);
++ if (!etdr)
++ goto err;
++ etdr->count = edma_cinfo->tx_ring_count;
++ edma_cinfo->tpd_ring[i] = etdr;
++ }
++
++ return 0;
++err:
++ edma_free_queues(edma_cinfo);
++ return -1;
++}
++
++/* edma_alloc_queues_rx()
++ * Allocate memory for all rings
++ */
++int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo)
++{
++ int i, j;
++
++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
++ struct edma_rfd_desc_ring *rfd_ring;
++ rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring),
++ GFP_KERNEL);
++ if (!rfd_ring)
++ goto err;
++ rfd_ring->count = edma_cinfo->rx_ring_count;
++ edma_cinfo->rfd_ring[j] = rfd_ring;
++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
++ }
++ return 0;
++err:
++ edma_free_queues(edma_cinfo);
++ return -1;
++}
++
++/* edma_clear_irq_status()
++ * Clear interrupt status
++ */
++void edma_clear_irq_status()
++{
++ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
++ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
++ edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff);
++ edma_write_reg(EDMA_REG_WOL_ISR, 0x1);
++};
++
++/* edma_configure()
++ * Configure skb, edma interrupts and control register.
++ */
++int edma_configure(struct edma_common_info *edma_cinfo)
++{
++ struct edma_hw *hw = &edma_cinfo->hw;
++ u32 intr_modrt_data;
++ u32 intr_ctrl_data = 0;
++ int i, j, ret_count;
++
++ edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data);
++ intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT);
++ intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT;
++ edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data);
++
++ edma_clear_irq_status();
++
++ /* Clear any WOL status */
++ edma_write_reg(EDMA_REG_WOL_CTRL, 0);
++ intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT);
++ intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT);
++ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
++ edma_configure_tx(edma_cinfo);
++ edma_configure_rx(edma_cinfo);
++
++ /* Allocate the RX buffer */
++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
++ struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j];
++ ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j);
++ if (ret_count) {
++ dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n");
++ }
++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
++ }
++
++ /* Configure descriptor Ring */
++ edma_init_desc(edma_cinfo);
++ return 0;
++}
++
++/* edma_irq_enable()
++ * Enable default interrupt generation settings
++ */
++void edma_irq_enable(struct edma_common_info *edma_cinfo)
++{
++ struct edma_hw *hw = &edma_cinfo->hw;
++ int i, j;
++
++ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
++ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask);
++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
++ }
++ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
++ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask);
++}
++
++/* edma_irq_disable()
++ * Disable Interrupt
++ */
++void edma_irq_disable(struct edma_common_info *edma_cinfo)
++{
++ int i;
++
++ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++)
++ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0);
++
++ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++)
++ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0);
++ edma_write_reg(EDMA_REG_MISC_IMR, 0);
++ edma_write_reg(EDMA_REG_WOL_IMR, 0);
++}
++
++/* edma_free_irqs()
++ * Free All IRQs
++ */
++void edma_free_irqs(struct edma_adapter *adapter)
++{
++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
++ int i, j;
++ int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2);
++
++ for (i = 0; i < CONFIG_NR_CPUS; i++) {
++ for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++)
++ free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]);
++
++ for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++)
++ free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]);
++ }
++}
++
++/* edma_enable_rx_ctrl()
++ * Enable RX queue control
++ */
++void edma_enable_rx_ctrl(struct edma_hw *hw)
++{
++ u32 data;
++
++ edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
++ data |= EDMA_RXQ_CTRL_EN;
++ edma_write_reg(EDMA_REG_RXQ_CTRL, data);
++}
++
++
++/* edma_enable_tx_ctrl()
++ * Enable TX queue control
++ */
++void edma_enable_tx_ctrl(struct edma_hw *hw)
++{
++ u32 data;
++
++ edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
++ data |= EDMA_TXQ_CTRL_TXQ_EN;
++ edma_write_reg(EDMA_REG_TXQ_CTRL, data);
++}
++
++/* edma_stop_rx_tx()
++ * Disable RX/TQ Queue control
++ */
++void edma_stop_rx_tx(struct edma_hw *hw)
++{
++ u32 data;
++
++ edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
++ data &= ~EDMA_RXQ_CTRL_EN;
++ edma_write_reg(EDMA_REG_RXQ_CTRL, data);
++ edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
++ data &= ~EDMA_TXQ_CTRL_TXQ_EN;
++ edma_write_reg(EDMA_REG_TXQ_CTRL, data);
++}
++
++/* edma_reset()
++ * Reset the EDMA
++ */
++int edma_reset(struct edma_common_info *edma_cinfo)
++{
++ struct edma_hw *hw = &edma_cinfo->hw;
++
++ edma_irq_disable(edma_cinfo);
++
++ edma_clear_irq_status();
++
++ edma_stop_rx_tx(hw);
++
++ return 0;
++}
++
++/* edma_fill_netdev()
++ * Fill netdev for each etdr
++ */
++int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id,
++ int dev, int txq_id)
++{
++ struct edma_tx_desc_ring *etdr;
++ int i = 0;
++
++ etdr = edma_cinfo->tpd_ring[queue_id];
++
++ while (etdr->netdev[i])
++ i++;
++
++ if (i >= EDMA_MAX_NETDEV_PER_QUEUE)
++ return -1;
++
++ /* Populate the netdev associated with the tpd ring */
++ etdr->netdev[i] = edma_netdev[dev];
++ etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id);
++
++ return 0;
++}
++
++/* edma_change_mtu()
++ * change the MTU of the NIC.
++ */
++int edma_change_mtu(struct net_device *netdev, int new_mtu)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
++ int old_mtu = netdev->mtu;
++ int max_frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + (2 * VLAN_HLEN);
++
++ if ((max_frame_size < ETH_ZLEN + ETH_FCS_LEN) ||
++ (max_frame_size > EDMA_MAX_JUMBO_FRAME_SIZE)) {
++ dev_err(&edma_cinfo->pdev->dev, "MTU setting not correct\n");
++ return -EINVAL;
++ }
++
++ /* set MTU */
++ if (old_mtu != new_mtu) {
++ netdev->mtu = new_mtu;
++ netdev_update_features(netdev);
++ }
++
++ return 0;
++}
++
++/* edma_set_mac()
++ * Change the Ethernet Address of the NIC
++ */
++int edma_set_mac_addr(struct net_device *netdev, void *p)
++{
++ struct sockaddr *addr = p;
++
++ if (!is_valid_ether_addr(addr->sa_data))
++ return -EINVAL;
++
++ if (netif_running(netdev))
++ return -EBUSY;
++
++ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
++ return 0;
++}
++
++/* edma_set_stp_rstp()
++ * set stp/rstp
++ */
++void edma_set_stp_rstp(bool rstp)
++{
++ edma_stp_rstp = rstp;
++}
++
++/* edma_assign_ath_hdr_type()
++ * assign atheros header eth type
++ */
++void edma_assign_ath_hdr_type(int eth_type)
++{
++ edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK;
++}
++
++/* edma_get_default_vlan_tag()
++ * Used by other modules to get the default vlan tag
++ */
++int edma_get_default_vlan_tag(struct net_device *netdev)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++
++ if (adapter->default_vlan_tag)
++ return adapter->default_vlan_tag;
++
++ return 0;
++}
++
++/* edma_open()
++ * gets called when netdevice is up, start the queue.
++ */
++int edma_open(struct net_device *netdev)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++ struct platform_device *pdev = adapter->edma_cinfo->pdev;
++
++ netif_tx_start_all_queues(netdev);
++ edma_initialise_rfs_flow_table(adapter);
++ set_bit(__EDMA_UP, &adapter->state_flags);
++
++ /* if Link polling is enabled, in our case enabled for WAN, then
++ * do a phy start, else always set link as UP
++ */
++ if (adapter->poll_required) {
++ if (!IS_ERR(adapter->phydev)) {
++ phy_start(adapter->phydev);
++ phy_start_aneg(adapter->phydev);
++ adapter->link_state = __EDMA_LINKDOWN;
++ } else {
++ dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n");
++ }
++ } else {
++ adapter->link_state = __EDMA_LINKUP;
++ netif_carrier_on(netdev);
++ }
++
++ return 0;
++}
++
++
++/* edma_close()
++ * gets called when netdevice is down, stops the queue.
++ */
++int edma_close(struct net_device *netdev)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++
++ edma_free_rfs_flow_table(adapter);
++ netif_carrier_off(netdev);
++ netif_tx_stop_all_queues(netdev);
++
++ if (adapter->poll_required) {
++ if (!IS_ERR(adapter->phydev))
++ phy_stop(adapter->phydev);
++ }
++
++ adapter->link_state = __EDMA_LINKDOWN;
++
++ /* Set GMAC state to UP before link state is checked
++ */
++ clear_bit(__EDMA_UP, &adapter->state_flags);
++
++ return 0;
++}
++
++/* edma_poll
++ * polling function that gets called when the napi gets scheduled.
++ *
++ * Main sequence of task performed in this api
++ * is clear irq status -> clear_tx_irq -> clean_rx_irq->
++ * enable interrupts.
++ */
++int edma_poll(struct napi_struct *napi, int budget)
++{
++ struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi,
++ struct edma_per_cpu_queues_info, napi);
++ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
++ u32 reg_data;
++ u32 shadow_rx_status, shadow_tx_status;
++ int queue_id;
++ int i, work_done = 0;
++
++ /* Store the Rx/Tx status by ANDing it with
++ * appropriate CPU RX?TX mask
++ */
++ edma_read_reg(EDMA_REG_RX_ISR, &reg_data);
++ edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
++ shadow_rx_status = edma_percpu_info->rx_status;
++ edma_read_reg(EDMA_REG_TX_ISR, &reg_data);
++ edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask;
++ shadow_tx_status = edma_percpu_info->tx_status;
++
++ /* Every core will have a start, which will be computed
++ * in probe and stored in edma_percpu_info->tx_start variable.
++ * We will shift the status bit by tx_start to obtain
++ * status bits for the core on which the current processing
++ * is happening. Since, there are 4 tx queues per core,
++ * we will run the loop till we get the correct queue to clear.
++ */
++ while (edma_percpu_info->tx_status) {
++ queue_id = ffs(edma_percpu_info->tx_status) - 1;
++ edma_tx_complete(edma_cinfo, queue_id);
++ edma_percpu_info->tx_status &= ~(1 << queue_id);
++ }
++
++ /* Every core will have a start, which will be computed
++ * in probe and stored in edma_percpu_info->tx_start variable.
++ * We will shift the status bit by tx_start to obtain
++ * status bits for the core on which the current processing
++ * is happening. Since, there are 4 tx queues per core, we
++ * will run the loop till we get the correct queue to clear.
++ */
++ while (edma_percpu_info->rx_status) {
++ queue_id = ffs(edma_percpu_info->rx_status) - 1;
++ edma_rx_complete(edma_cinfo, &work_done,
++ budget, queue_id, napi);
++
++ if (likely(work_done < budget))
++ edma_percpu_info->rx_status &= ~(1 << queue_id);
++ else
++ break;
++ }
++
++ /* Clear the status register, to avoid the interrupts to
++ * reoccur.This clearing of interrupt status register is
++ * done here as writing to status register only takes place
++ * once the producer/consumer index has been updated to
++ * reflect that the packet transmission/reception went fine.
++ */
++ edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
++ edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
++
++ /* If budget not fully consumed, exit the polling mode */
++ if (likely(work_done < budget)) {
++ napi_complete(napi);
++
++ /* re-enable the interrupts */
++ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
++ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1);
++ for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
++ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1);
++ }
++
++ return work_done;
++}
++
++/* edma interrupt()
++ * interrupt handler
++ */
++irqreturn_t edma_interrupt(int irq, void *dev)
++{
++ struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev;
++ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
++ int i;
++
++ /* Unmask the TX/RX interrupt register */
++ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
++ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0);
++
++ for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
++ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0);
++
++ napi_schedule(&edma_percpu_info->napi);
++
++ return IRQ_HANDLED;
++}
+--- /dev/null
++++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
+@@ -0,0 +1,447 @@
++/*
++ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for
++ * any purpose with or without fee is hereby granted, provided that the
++ * above copyright notice and this permission notice appear in all copies.
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#ifndef _EDMA_H_
++#define _EDMA_H_
++
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/skbuff.h>
++#include <linux/io.h>
++#include <linux/vmalloc.h>
++#include <linux/pagemap.h>
++#include <linux/smp.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/kernel.h>
++#include <linux/device.h>
++#include <linux/sysctl.h>
++#include <linux/phy.h>
++#include <linux/of_net.h>
++#include <net/checksum.h>
++#include <net/ip6_checksum.h>
++#include <asm-generic/bug.h>
++#include "ess_edma.h"
++
++#define EDMA_CPU_CORES_SUPPORTED 4
++#define EDMA_MAX_PORTID_SUPPORTED 5
++#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED
++#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1)
++#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */
++#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */
++
++#define EDMA_MAX_RECEIVE_QUEUE 8
++#define EDMA_MAX_TRANSMIT_QUEUE 16
++
++/* WAN/LAN adapter number */
++#define EDMA_WAN 0
++#define EDMA_LAN 1
++
++/* VLAN tag */
++#define EDMA_LAN_DEFAULT_VLAN 1
++#define EDMA_WAN_DEFAULT_VLAN 2
++
++#define EDMA_DEFAULT_GROUP1_VLAN 1
++#define EDMA_DEFAULT_GROUP2_VLAN 2
++#define EDMA_DEFAULT_GROUP3_VLAN 3
++#define EDMA_DEFAULT_GROUP4_VLAN 4
++#define EDMA_DEFAULT_GROUP5_VLAN 5
++
++/* Queues exposed to linux kernel */
++#define EDMA_NETDEV_TX_QUEUE 4
++#define EDMA_NETDEV_RX_QUEUE 4
++
++/* Number of queues per core */
++#define EDMA_NUM_TXQ_PER_CORE 4
++#define EDMA_NUM_RXQ_PER_CORE 2
++
++#define EDMA_TPD_EOP_SHIFT 31
++
++#define EDMA_PORT_ID_SHIFT 12
++#define EDMA_PORT_ID_MASK 0x7
++
++/* tpd word 3 bit 18-28 */
++#define EDMA_TPD_PORT_BITMAP_SHIFT 18
++
++#define EDMA_TPD_FROM_CPU_SHIFT 25
++
++#define EDMA_FROM_CPU_MASK 0x80
++#define EDMA_SKB_PRIORITY_MASK 0x38
++
++/* TX/RX descriptor ring count */
++/* should be a power of 2 */
++#define EDMA_RX_RING_SIZE 128
++#define EDMA_TX_RING_SIZE 128
++
++/* Flags used in paged/non paged mode */
++#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256
++#define EDMA_RX_HEAD_BUFF_SIZE 1540
++
++/* MAX frame size supported by switch */
++#define EDMA_MAX_JUMBO_FRAME_SIZE 9216
++
++/* Configurations */
++#define EDMA_INTR_CLEAR_TYPE 0
++#define EDMA_INTR_SW_IDX_W_TYPE 0
++#define EDMA_FIFO_THRESH_TYPE 0
++#define EDMA_RSS_TYPE 0
++#define EDMA_RX_IMT 0x0020
++#define EDMA_TX_IMT 0x0050
++#define EDMA_TPD_BURST 5
++#define EDMA_TXF_BURST 0x100
++#define EDMA_RFD_BURST 8
++#define EDMA_RFD_THR 16
++#define EDMA_RFD_LTHR 0
++
++/* RX/TX per CPU based mask/shift */
++#define EDMA_TX_PER_CPU_MASK 0xF
++#define EDMA_RX_PER_CPU_MASK 0x3
++#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2
++#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1
++#define EDMA_TX_CPU_START_SHIFT 0x2
++#define EDMA_RX_CPU_START_SHIFT 0x1
++
++/* FLags used in transmit direction */
++#define EDMA_HW_CHECKSUM 0x00000001
++#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002
++#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004
++
++#define EDMA_SW_DESC_FLAG_LAST 0x1
++#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2
++#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4
++#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8
++#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10
++#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20
++
++
++#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1)
++
++/* Ethtool specific list of EDMA supported features */
++#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \
++ | SUPPORTED_10baseT_Full \
++ | SUPPORTED_100baseT_Half \
++ | SUPPORTED_100baseT_Full \
++ | SUPPORTED_1000baseT_Full)
++
++/* Recevie side atheros Header */
++#define EDMA_RX_ATH_HDR_VERSION 0x2
++#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14
++#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11
++#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6
++#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4
++
++/* Transmit side atheros Header */
++#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F
++#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80
++#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7
++
++#define EDMA_TXQ_START_CORE0 8
++#define EDMA_TXQ_START_CORE1 12
++#define EDMA_TXQ_START_CORE2 0
++#define EDMA_TXQ_START_CORE3 4
++
++#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00
++#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000
++#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F
++#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0
++
++#define EDMA_ETH_HDR_LEN 12
++#define EDMA_ETH_TYPE_MASK 0xFFFF
++
++#define EDMA_RX_BUFFER_WRITE 16
++#define EDMA_RFD_AVAIL_THR 80
++
++#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR
++
++extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst,
++ __be16 sport, __be16 dport,
++ uint8_t proto, u16 loadbalance, bool action);
++struct edma_ethtool_statistics {
++ u32 tx_q0_pkt;
++ u32 tx_q1_pkt;
++ u32 tx_q2_pkt;
++ u32 tx_q3_pkt;
++ u32 tx_q4_pkt;
++ u32 tx_q5_pkt;
++ u32 tx_q6_pkt;
++ u32 tx_q7_pkt;
++ u32 tx_q8_pkt;
++ u32 tx_q9_pkt;
++ u32 tx_q10_pkt;
++ u32 tx_q11_pkt;
++ u32 tx_q12_pkt;
++ u32 tx_q13_pkt;
++ u32 tx_q14_pkt;
++ u32 tx_q15_pkt;
++ u32 tx_q0_byte;
++ u32 tx_q1_byte;
++ u32 tx_q2_byte;
++ u32 tx_q3_byte;
++ u32 tx_q4_byte;
++ u32 tx_q5_byte;
++ u32 tx_q6_byte;
++ u32 tx_q7_byte;
++ u32 tx_q8_byte;
++ u32 tx_q9_byte;
++ u32 tx_q10_byte;
++ u32 tx_q11_byte;
++ u32 tx_q12_byte;
++ u32 tx_q13_byte;
++ u32 tx_q14_byte;
++ u32 tx_q15_byte;
++ u32 rx_q0_pkt;
++ u32 rx_q1_pkt;
++ u32 rx_q2_pkt;
++ u32 rx_q3_pkt;
++ u32 rx_q4_pkt;
++ u32 rx_q5_pkt;
++ u32 rx_q6_pkt;
++ u32 rx_q7_pkt;
++ u32 rx_q0_byte;
++ u32 rx_q1_byte;
++ u32 rx_q2_byte;
++ u32 rx_q3_byte;
++ u32 rx_q4_byte;
++ u32 rx_q5_byte;
++ u32 rx_q6_byte;
++ u32 rx_q7_byte;
++ u32 tx_desc_error;
++};
++
++struct edma_mdio_data {
++ struct mii_bus *mii_bus;
++ void __iomem *membase;
++ int phy_irq[PHY_MAX_ADDR];
++};
++
++/* EDMA LINK state */
++enum edma_link_state {
++ __EDMA_LINKUP, /* Indicate link is UP */
++ __EDMA_LINKDOWN /* Indicate link is down */
++};
++
++/* EDMA GMAC state */
++enum edma_gmac_state {
++ __EDMA_UP /* use to indicate GMAC is up */
++};
++
++/* edma transmit descriptor */
++struct edma_tx_desc {
++ __le16 len; /* full packet including CRC */
++ __le16 svlan_tag; /* vlan tag */
++ __le32 word1; /* byte 4-7 */
++ __le32 addr; /* address of buffer */
++ __le32 word3; /* byte 12 */
++};
++
++/* edma receive return descriptor */
++struct edma_rx_return_desc {
++ u16 rrd0;
++ u16 rrd1;
++ u16 rrd2;
++ u16 rrd3;
++ u16 rrd4;
++ u16 rrd5;
++ u16 rrd6;
++ u16 rrd7;
++};
++
++/* RFD descriptor */
++struct edma_rx_free_desc {
++ __le32 buffer_addr; /* buffer address */
++};
++
++/* edma hw specific data */
++struct edma_hw {
++ u32 __iomem *hw_addr; /* inner register address */
++ struct edma_adapter *adapter; /* netdevice adapter */
++ u32 rx_intr_mask; /*rx interrupt mask */
++ u32 tx_intr_mask; /* tx interrupt nask */
++ u32 misc_intr_mask; /* misc interrupt mask */
++ u32 wol_intr_mask; /* wake on lan interrupt mask */
++ bool intr_clear_type; /* interrupt clear */
++ bool intr_sw_idx_w; /* interrupt software index */
++ u32 rx_head_buff_size; /* Rx buffer size */
++ u8 rss_type; /* rss protocol type */
++};
++
++/* edma_sw_desc stores software descriptor
++ * SW descriptor has 1:1 map with HW descriptor
++ */
++struct edma_sw_desc {
++ struct sk_buff *skb;
++ dma_addr_t dma; /* dma address */
++ u16 length; /* Tx/Rx buffer length */
++ u32 flags;
++};
++
++/* per core related information */
++struct edma_per_cpu_queues_info {
++ struct napi_struct napi; /* napi associated with the core */
++ u32 tx_mask; /* tx interrupt mask */
++ u32 rx_mask; /* rx interrupt mask */
++ u32 tx_status; /* tx interrupt status */
++ u32 rx_status; /* rx interrupt status */
++ u32 tx_start; /* tx queue start */
++ u32 rx_start; /* rx queue start */
++ struct edma_common_info *edma_cinfo; /* edma common info */
++};
++
++/* edma specific common info */
++struct edma_common_info {
++ struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */
++ struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */
++ struct platform_device *pdev; /* device structure */
++ struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED];
++ struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX];
++ struct ctl_table_header *edma_ctl_table_hdr;
++ int num_gmac;
++ struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */
++ int num_rx_queues; /* number of rx queue */
++ u32 num_tx_queues; /* number of tx queue */
++ u32 tx_irq[16]; /* number of tx irq */
++ u32 rx_irq[8]; /* number of rx irq */
++ u32 from_cpu; /* from CPU TPD field */
++ u32 num_rxq_per_core; /* Rx queues per core */
++ u32 num_txq_per_core; /* Tx queues per core */
++ u16 tx_ring_count; /* Tx ring count */
++ u16 rx_ring_count; /* Rx ring*/
++ u16 rx_head_buffer_len; /* rx buffer length */
++ u16 rx_page_buffer_len; /* rx buffer length */
++ u32 page_mode; /* Jumbo frame supported flag */
++ u32 fraglist_mode; /* fraglist supported flag */
++ struct edma_hw hw; /* edma hw specific structure */
++ struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
++ spinlock_t stats_lock; /* protect edma stats area for updation */
++};
++
++/* transimit packet descriptor (tpd) ring */
++struct edma_tx_desc_ring {
++ struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */
++ struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE];
++ /* Array of netdevs associated with the tpd ring */
++ void *hw_desc; /* descriptor ring virtual address */
++ struct edma_sw_desc *sw_desc; /* buffer associated with ring */
++ int netdev_bmp; /* Bitmap for per-ring netdevs */
++ u32 size; /* descriptor ring length in bytes */
++ u16 count; /* number of descriptors in the ring */
++ dma_addr_t dma; /* descriptor ring physical address */
++ u16 sw_next_to_fill; /* next Tx descriptor to fill */
++ u16 sw_next_to_clean; /* next Tx descriptor to clean */
++};
++
++/* receive free descriptor (rfd) ring */
++struct edma_rfd_desc_ring {
++ void *hw_desc; /* descriptor ring virtual address */
++ struct edma_sw_desc *sw_desc; /* buffer associated with ring */
++ u16 size; /* bytes allocated to sw_desc */
++ u16 count; /* number of descriptors in the ring */
++ dma_addr_t dma; /* descriptor ring physical address */
++ u16 sw_next_to_fill; /* next descriptor to fill */
++ u16 sw_next_to_clean; /* next descriptor to clean */
++};
++
++/* edma_rfs_flter_node - rfs filter node in hash table */
++struct edma_rfs_filter_node {
++ struct flow_keys keys;
++ u32 flow_id; /* flow_id of filter provided by kernel */
++ u16 filter_id; /* filter id of filter returned by adaptor */
++ u16 rq_id; /* desired rq index */
++ struct hlist_node node; /* edma rfs list node */
++};
++
++/* edma_rfs_flow_tbl - rfs flow table */
++struct edma_rfs_flow_table {
++ u16 max_num_filter; /* Maximum number of filters edma supports */
++ u16 hashtoclean; /* hash table index to clean next */
++ int filter_available; /* Number of free filters available */
++ struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES];
++ spinlock_t rfs_ftab_lock;
++ struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */
++};
++
++/* EDMA net device structure */
++struct edma_adapter {
++ struct net_device *netdev; /* netdevice */
++ struct platform_device *pdev; /* platform device */
++ struct edma_common_info *edma_cinfo; /* edma common info */
++ struct phy_device *phydev; /* Phy device */
++ struct edma_rfs_flow_table rfs; /* edma rfs flow table */
++ struct net_device_stats stats; /* netdev statistics */
++ set_rfs_filter_callback_t set_rfs_rule;
++ u32 flags;/* status flags */
++ unsigned long state_flags; /* GMAC up/down flags */
++ u32 forced_speed; /* link force speed */
++ u32 forced_duplex; /* link force duplex */
++ u32 link_state; /* phy link state */
++ u32 phy_mdio_addr; /* PHY device address on MII interface */
++ u32 poll_required; /* check if link polling is required */
++ u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */
++ u32 default_vlan_tag; /* vlan tag */
++ u32 dp_bitmap;
++ uint8_t phy_id[MII_BUS_ID_SIZE + 3];
++};
++
++int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo);
++int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo);
++int edma_open(struct net_device *netdev);
++int edma_close(struct net_device *netdev);
++void edma_free_tx_resources(struct edma_common_info *edma_c_info);
++void edma_free_rx_resources(struct edma_common_info *edma_c_info);
++int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo);
++int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo);
++void edma_free_tx_rings(struct edma_common_info *edma_cinfo);
++void edma_free_rx_rings(struct edma_common_info *edma_cinfo);
++void edma_free_queues(struct edma_common_info *edma_cinfo);
++void edma_irq_disable(struct edma_common_info *edma_cinfo);
++int edma_reset(struct edma_common_info *edma_cinfo);
++int edma_poll(struct napi_struct *napi, int budget);
++netdev_tx_t edma_xmit(struct sk_buff *skb,
++ struct net_device *netdev);
++int edma_configure(struct edma_common_info *edma_cinfo);
++void edma_irq_enable(struct edma_common_info *edma_cinfo);
++void edma_enable_tx_ctrl(struct edma_hw *hw);
++void edma_enable_rx_ctrl(struct edma_hw *hw);
++void edma_stop_rx_tx(struct edma_hw *hw);
++void edma_free_irqs(struct edma_adapter *adapter);
++irqreturn_t edma_interrupt(int irq, void *dev);
++void edma_write_reg(u16 reg_addr, u32 reg_value);
++void edma_read_reg(u16 reg_addr, volatile u32 *reg_value);
++struct net_device_stats *edma_get_stats(struct net_device *netdev);
++int edma_set_mac_addr(struct net_device *netdev, void *p);
++int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
++ u16 rxq, u32 flow_id);
++int edma_register_rfs_filter(struct net_device *netdev,
++ set_rfs_filter_callback_t set_filter);
++void edma_flow_may_expire(unsigned long data);
++void edma_set_ethtool_ops(struct net_device *netdev);
++int edma_change_mtu(struct net_device *netdev, int new_mtu);
++void edma_set_stp_rstp(bool tag);
++void edma_assign_ath_hdr_type(int tag);
++int edma_get_default_vlan_tag(struct net_device *netdev);
++void edma_adjust_link(struct net_device *netdev);
++int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id);
++void edma_read_append_stats(struct edma_common_info *edma_cinfo);
++void edma_change_tx_coalesce(int usecs);
++void edma_change_rx_coalesce(int usecs);
++void edma_get_tx_rx_coalesce(u32 *reg_val);
++void edma_clear_irq_status(void);
++#endif /* _EDMA_H_ */
+--- /dev/null
++++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
+@@ -0,0 +1,1220 @@
++/*
++ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for
++ * any purpose with or without fee is hereby granted, provided that the
++ * above copyright notice and this permission notice appear in all copies.
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/cpu_rmap.h>
++#include <linux/of.h>
++#include <linux/of_net.h>
++#include <linux/timer.h>
++#include "edma.h"
++#include "ess_edma.h"
++
++/* Weight round robin and virtual QID mask */
++#define EDMA_WRR_VID_SCTL_MASK 0xffff
++
++/* Weight round robin and virtual QID shift */
++#define EDMA_WRR_VID_SCTL_SHIFT 16
++
++char edma_axi_driver_name[] = "ess_edma";
++static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
++ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
++
++static u32 edma_hw_addr;
++
++struct timer_list edma_stats_timer;
++
++char edma_tx_irq[16][64];
++char edma_rx_irq[8][64];
++struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
++static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1,
++ EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3};
++static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1,
++ EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3};
++
++static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN;
++static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN;
++static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN;
++static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN;
++static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN;
++static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN;
++static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN;
++static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE;
++static u32 edma_rss_idt_idx;
++
++static int edma_weight_assigned_to_q __read_mostly;
++static int edma_queue_to_virtual_q __read_mostly;
++static bool edma_enable_rstp __read_mostly;
++static int edma_athr_hdr_eth_type __read_mostly;
++
++static int page_mode;
++module_param(page_mode, int, 0);
++MODULE_PARM_DESC(page_mode, "enable page mode");
++
++static int overwrite_mode;
++module_param(overwrite_mode, int, 0);
++MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting");
++
++static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE;
++module_param(jumbo_mru, int, 0);
++MODULE_PARM_DESC(jumbo_mru, "enable fraglist support");
++
++static int num_rxq = 4;
++module_param(num_rxq, int, 0);
++MODULE_PARM_DESC(num_rxq, "change the number of rx queues");
++
++void edma_write_reg(u16 reg_addr, u32 reg_value)
++{
++ writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr)));
++}
++
++void edma_read_reg(u16 reg_addr, volatile u32 *reg_value)
++{
++ *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
++}
++
++/* edma_change_tx_coalesce()
++ * change tx interrupt moderation timer
++ */
++void edma_change_tx_coalesce(int usecs)
++{
++ u32 reg_value;
++
++ /* Here, we right shift the value from the user by 1, this is
++ * done because IMT resolution timer is 2usecs. 1 count
++ * of this register corresponds to 2 usecs.
++ */
++ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
++ reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16));
++ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
++}
++
++/* edma_change_rx_coalesce()
++ * change rx interrupt moderation timer
++ */
++void edma_change_rx_coalesce(int usecs)
++{
++ u32 reg_value;
++
++ /* Here, we right shift the value from the user by 1, this is
++ * done because IMT resolution timer is 2usecs. 1 count
++ * of this register corresponds to 2 usecs.
++ */
++ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
++ reg_value = ((reg_value & 0xffff0000) | (usecs >> 1));
++ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
++}
++
++/* edma_get_tx_rx_coalesce()
++ * Get tx/rx interrupt moderation value
++ */
++void edma_get_tx_rx_coalesce(u32 *reg_val)
++{
++ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val);
++}
++
++void edma_read_append_stats(struct edma_common_info *edma_cinfo)
++{
++ uint32_t *p;
++ int i;
++ u32 stat;
++
++ spin_lock(&edma_cinfo->stats_lock);
++ p = (uint32_t *)&(edma_cinfo->edma_ethstats);
++
++ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
++ edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat);
++ *p += stat;
++ p++;
++ }
++
++ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
++ edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat);
++ *p += stat;
++ p++;
++ }
++
++ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
++ edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat);
++ *p += stat;
++ p++;
++ }
++
++ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
++ edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat);
++ *p += stat;
++ p++;
++ }
++
++ spin_unlock(&edma_cinfo->stats_lock);
++}
++
++static void edma_statistics_timer(unsigned long data)
++{
++ struct edma_common_info *edma_cinfo = (struct edma_common_info *)data;
++
++ edma_read_append_stats(edma_cinfo);
++
++ mod_timer(&edma_stats_timer, jiffies + 1*HZ);
++}
++
++static int edma_enable_stp_rstp(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ int ret;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++ if (write)
++ edma_set_stp_rstp(edma_enable_rstp);
++
++ return ret;
++}
++
++static int edma_ath_hdr_eth_type(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ int ret;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++ if (write)
++ edma_assign_ath_hdr_type(edma_athr_hdr_eth_type);
++
++ return ret;
++}
++
++static int edma_change_default_lan_vlan(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ struct edma_adapter *adapter;
++ int ret;
++
++ if (!edma_netdev[1]) {
++ pr_err("Netdevice for default_lan does not exist\n");
++ return -1;
++ }
++
++ adapter = netdev_priv(edma_netdev[1]);
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++
++ if (write)
++ adapter->default_vlan_tag = edma_default_ltag;
++
++ return ret;
++}
++
++static int edma_change_default_wan_vlan(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ struct edma_adapter *adapter;
++ int ret;
++
++ if (!edma_netdev[0]) {
++ pr_err("Netdevice for default_wan does not exist\n");
++ return -1;
++ }
++
++ adapter = netdev_priv(edma_netdev[0]);
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++
++ if (write)
++ adapter->default_vlan_tag = edma_default_wtag;
++
++ return ret;
++}
++
++static int edma_change_group1_vtag(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ struct edma_adapter *adapter;
++ struct edma_common_info *edma_cinfo;
++ int ret;
++
++ if (!edma_netdev[0]) {
++ pr_err("Netdevice for Group 1 does not exist\n");
++ return -1;
++ }
++
++ adapter = netdev_priv(edma_netdev[0]);
++ edma_cinfo = adapter->edma_cinfo;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++
++ if (write)
++ adapter->default_vlan_tag = edma_default_group1_vtag;
++
++ return ret;
++}
++
++static int edma_change_group2_vtag(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ struct edma_adapter *adapter;
++ struct edma_common_info *edma_cinfo;
++ int ret;
++
++ if (!edma_netdev[1]) {
++ pr_err("Netdevice for Group 2 does not exist\n");
++ return -1;
++ }
++
++ adapter = netdev_priv(edma_netdev[1]);
++ edma_cinfo = adapter->edma_cinfo;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++
++ if (write)
++ adapter->default_vlan_tag = edma_default_group2_vtag;
++
++ return ret;
++}
++
++static int edma_change_group3_vtag(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ struct edma_adapter *adapter;
++ struct edma_common_info *edma_cinfo;
++ int ret;
++
++ if (!edma_netdev[2]) {
++ pr_err("Netdevice for Group 3 does not exist\n");
++ return -1;
++ }
++
++ adapter = netdev_priv(edma_netdev[2]);
++ edma_cinfo = adapter->edma_cinfo;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++
++ if (write)
++ adapter->default_vlan_tag = edma_default_group3_vtag;
++
++ return ret;
++}
++
++static int edma_change_group4_vtag(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ struct edma_adapter *adapter;
++ struct edma_common_info *edma_cinfo;
++ int ret;
++
++ if (!edma_netdev[3]) {
++ pr_err("Netdevice for Group 4 does not exist\n");
++ return -1;
++ }
++
++ adapter = netdev_priv(edma_netdev[3]);
++ edma_cinfo = adapter->edma_cinfo;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++
++ if (write)
++ adapter->default_vlan_tag = edma_default_group4_vtag;
++
++ return ret;
++}
++
++static int edma_change_group5_vtag(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ struct edma_adapter *adapter;
++ struct edma_common_info *edma_cinfo;
++ int ret;
++
++ if (!edma_netdev[4]) {
++ pr_err("Netdevice for Group 5 does not exist\n");
++ return -1;
++ }
++
++ adapter = netdev_priv(edma_netdev[4]);
++ edma_cinfo = adapter->edma_cinfo;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++
++ if (write)
++ adapter->default_vlan_tag = edma_default_group5_vtag;
++
++ return ret;
++}
++
++static int edma_set_rss_idt_value(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ int ret;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++ if (write && !ret)
++ edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx),
++ edma_rss_idt_val);
++ return ret;
++}
++
++static int edma_set_rss_idt_idx(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ int ret;
++ u32 old_value = edma_rss_idt_idx;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++ if (!write || ret)
++ return ret;
++
++ if (edma_rss_idt_idx >= EDMA_NUM_IDT) {
++ pr_err("Invalid RSS indirection table index %d\n",
++ edma_rss_idt_idx);
++ edma_rss_idt_idx = old_value;
++ return -EINVAL;
++ }
++ return ret;
++}
++
++static int edma_weight_assigned_to_queues(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ int ret, queue_id, weight;
++ u32 reg_data, data, reg_addr;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++ if (write) {
++ queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK;
++ if (queue_id < 0 || queue_id > 15) {
++ pr_err("queue_id not within desired range\n");
++ return -EINVAL;
++ }
++
++ weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT;
++ if (weight < 0 || weight > 0xF) {
++ pr_err("queue_id not within desired range\n");
++ return -EINVAL;
++ }
++
++ data = weight << EDMA_WRR_SHIFT(queue_id);
++
++ reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3);
++ edma_read_reg(reg_addr, &reg_data);
++ reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id));
++ edma_write_reg(reg_addr, data | reg_data);
++ }
++
++ return ret;
++}
++
++static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write,
++ void __user *buffer, size_t *lenp,
++ loff_t *ppos)
++{
++ int ret, queue_id, virtual_qid;
++ u32 reg_data, data, reg_addr;
++
++ ret = proc_dointvec(table, write, buffer, lenp, ppos);
++ if (write) {
++ queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK;
++ if (queue_id < 0 || queue_id > 15) {
++ pr_err("queue_id not within desired range\n");
++ return -EINVAL;
++ }
++
++ virtual_qid = edma_queue_to_virtual_q >>
++ EDMA_WRR_VID_SCTL_SHIFT;
++ if (virtual_qid < 0 || virtual_qid > 8) {
++ pr_err("queue_id not within desired range\n");
++ return -EINVAL;
++ }
++
++ data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id);
++
++ reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3);
++ edma_read_reg(reg_addr, &reg_data);
++ reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id));
++ edma_write_reg(reg_addr, data | reg_data);
++ }
++
++ return ret;
++}
++
++static struct ctl_table edma_table[] = {
++ {
++ .procname = "default_lan_tag",
++ .data = &edma_default_ltag,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_change_default_lan_vlan
++ },
++ {
++ .procname = "default_wan_tag",
++ .data = &edma_default_wtag,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_change_default_wan_vlan
++ },
++ {
++ .procname = "weight_assigned_to_queues",
++ .data = &edma_weight_assigned_to_q,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_weight_assigned_to_queues
++ },
++ {
++ .procname = "queue_to_virtual_queue_map",
++ .data = &edma_queue_to_virtual_q,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_queue_to_virtual_queue_map
++ },
++ {
++ .procname = "enable_stp_rstp",
++ .data = &edma_enable_rstp,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_enable_stp_rstp
++ },
++ {
++ .procname = "athr_hdr_eth_type",
++ .data = &edma_athr_hdr_eth_type,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_ath_hdr_eth_type
++ },
++ {
++ .procname = "default_group1_vlan_tag",
++ .data = &edma_default_group1_vtag,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_change_group1_vtag
++ },
++ {
++ .procname = "default_group2_vlan_tag",
++ .data = &edma_default_group2_vtag,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_change_group2_vtag
++ },
++ {
++ .procname = "default_group3_vlan_tag",
++ .data = &edma_default_group3_vtag,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_change_group3_vtag
++ },
++ {
++ .procname = "default_group4_vlan_tag",
++ .data = &edma_default_group4_vtag,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_change_group4_vtag
++ },
++ {
++ .procname = "default_group5_vlan_tag",
++ .data = &edma_default_group5_vtag,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_change_group5_vtag
++ },
++ {
++ .procname = "edma_rss_idt_value",
++ .data = &edma_rss_idt_val,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_set_rss_idt_value
++ },
++ {
++ .procname = "edma_rss_idt_idx",
++ .data = &edma_rss_idt_idx,
++ .maxlen = sizeof(int),
++ .mode = 0644,
++ .proc_handler = edma_set_rss_idt_idx
++ },
++ {}
++};
++
++/* edma_axi_netdev_ops
++ * Describe the operations supported by registered netdevices
++ *
++ * static const struct net_device_ops edma_axi_netdev_ops = {
++ * .ndo_open = edma_open,
++ * .ndo_stop = edma_close,
++ * .ndo_start_xmit = edma_xmit_frame,
++ * .ndo_set_mac_address = edma_set_mac_addr,
++ * }
++ */
++static const struct net_device_ops edma_axi_netdev_ops = {
++ .ndo_open = edma_open,
++ .ndo_stop = edma_close,
++ .ndo_start_xmit = edma_xmit,
++ .ndo_set_mac_address = edma_set_mac_addr,
++#ifdef CONFIG_RFS_ACCEL
++ .ndo_rx_flow_steer = edma_rx_flow_steer,
++ .ndo_register_rfs_filter = edma_register_rfs_filter,
++ .ndo_get_default_vlan_tag = edma_get_default_vlan_tag,
++#endif
++ .ndo_get_stats = edma_get_stats,
++ .ndo_change_mtu = edma_change_mtu,
++};
++
++/* edma_axi_probe()
++ * Initialise an adapter identified by a platform_device structure.
++ *
++ * The OS initialization, configuring of the adapter private structure,
++ * and a hardware reset occur in the probe.
++ */
++static int edma_axi_probe(struct platform_device *pdev)
++{
++ struct edma_common_info *edma_cinfo;
++ struct edma_hw *hw;
++ struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED];
++ struct resource *res;
++ struct device_node *np = pdev->dev.of_node;
++ struct device_node *pnp;
++ struct device_node *mdio_node = NULL;
++ struct platform_device *mdio_plat = NULL;
++ struct mii_bus *miibus = NULL;
++ struct edma_mdio_data *mdio_data = NULL;
++ int i, j, k, err = 0;
++ int portid_bmp;
++ int idx = 0, idx_mac = 0;
++
++ if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) {
++ dev_err(&pdev->dev, "Invalid CPU Cores\n");
++ return -EINVAL;
++ }
++
++ if ((num_rxq != 4) && (num_rxq != 8)) {
++ dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n");
++ return -EINVAL;
++ }
++ edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL);
++ if (!edma_cinfo) {
++ err = -ENOMEM;
++ goto err_alloc;
++ }
++
++ edma_cinfo->pdev = pdev;
++
++ of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac);
++ if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) {
++ pr_err("Invalid DTSI Entry for qcom,num_gmac\n");
++ err = -EINVAL;
++ goto err_cinfo;
++ }
++
++ /* Initialize the netdev array before allocation
++ * to avoid double free
++ */
++ for (i = 0 ; i < edma_cinfo->num_gmac ; i++)
++ edma_netdev[i] = NULL;
++
++ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) {
++ edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter),
++ EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE);
++
++ if (!edma_netdev[i]) {
++ dev_err(&pdev->dev,
++ "net device alloc fails for index=%d\n", i);
++ err = -ENODEV;
++ goto err_ioremap;
++ }
++
++ SET_NETDEV_DEV(edma_netdev[i], &pdev->dev);
++ platform_set_drvdata(pdev, edma_netdev[i]);
++ edma_cinfo->netdev[i] = edma_netdev[i];
++ }
++
++ /* Fill ring details */
++ edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE;
++ edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4);
++ edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE;
++
++ /* Update num rx queues based on module parameter */
++ edma_cinfo->num_rx_queues = num_rxq;
++ edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2);
++
++ edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE;
++
++ hw = &edma_cinfo->hw;
++
++ /* Fill HW defaults */
++ hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK;
++ hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK;
++
++ of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode);
++ of_property_read_u32(np, "qcom,rx_head_buf_size",
++ &hw->rx_head_buff_size);
++
++ if (overwrite_mode) {
++ dev_info(&pdev->dev, "page mode overwritten");
++ edma_cinfo->page_mode = page_mode;
++ }
++
++ if (jumbo_mru)
++ edma_cinfo->fraglist_mode = 1;
++
++ if (edma_cinfo->page_mode)
++ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO;
++ else if (edma_cinfo->fraglist_mode)
++ hw->rx_head_buff_size = jumbo_mru;
++ else if (!hw->rx_head_buff_size)
++ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE;
++
++ hw->misc_intr_mask = 0;
++ hw->wol_intr_mask = 0;
++
++ hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE;
++ hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE;
++
++ /* configure RSS type to the different protocol that can be
++ * supported
++ */
++ hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP |
++ EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP |
++ EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(edma_cinfo->hw.hw_addr)) {
++ err = PTR_ERR(edma_cinfo->hw.hw_addr);
++ goto err_ioremap;
++ }
++
++ edma_hw_addr = (u32)edma_cinfo->hw.hw_addr;
++
++ /* Parse tx queue interrupt number from device tree */
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
++ edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i);
++
++ /* Parse rx queue interrupt number from device tree
++ * Here we are setting j to point to the point where we
++ * left tx interrupt parsing(i.e 16) and run run the loop
++ * from 0 to 7 to parse rx interrupt number.
++ */
++ for (i = 0, j = edma_cinfo->num_tx_queues, k = 0;
++ i < edma_cinfo->num_rx_queues; i++) {
++ edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j);
++ k += ((num_rxq == 4) ? 2 : 1);
++ j += ((num_rxq == 4) ? 2 : 1);
++ }
++
++ edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size;
++ edma_cinfo->rx_page_buffer_len = PAGE_SIZE;
++
++ err = edma_alloc_queues_tx(edma_cinfo);
++ if (err) {
++ dev_err(&pdev->dev, "Allocation of TX queue failed\n");
++ goto err_tx_qinit;
++ }
++
++ err = edma_alloc_queues_rx(edma_cinfo);
++ if (err) {
++ dev_err(&pdev->dev, "Allocation of RX queue failed\n");
++ goto err_rx_qinit;
++ }
++
++ err = edma_alloc_tx_rings(edma_cinfo);
++ if (err) {
++ dev_err(&pdev->dev, "Allocation of TX resources failed\n");
++ goto err_tx_rinit;
++ }
++
++ err = edma_alloc_rx_rings(edma_cinfo);
++ if (err) {
++ dev_err(&pdev->dev, "Allocation of RX resources failed\n");
++ goto err_rx_rinit;
++ }
++
++ /* Initialize netdev and netdev bitmap for transmit descriptor rings */
++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i];
++ int j;
++
++ etdr->netdev_bmp = 0;
++ for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) {
++ etdr->netdev[j] = NULL;
++ etdr->nq[j] = NULL;
++ }
++ }
++
++ if (of_property_read_bool(np, "qcom,mdio_supported")) {
++ mdio_node = of_find_compatible_node(NULL, NULL,
++ "qcom,ipq4019-mdio");
++ if (!mdio_node) {
++ dev_err(&pdev->dev, "cannot find mdio node by phandle");
++ err = -EIO;
++ goto err_mdiobus_init_fail;
++ }
++
++ mdio_plat = of_find_device_by_node(mdio_node);
++ if (!mdio_plat) {
++ dev_err(&pdev->dev,
++ "cannot find platform device from mdio node");
++ of_node_put(mdio_node);
++ err = -EIO;
++ goto err_mdiobus_init_fail;
++ }
++
++ mdio_data = dev_get_drvdata(&mdio_plat->dev);
++ if (!mdio_data) {
++ dev_err(&pdev->dev,
++ "cannot get mii bus reference from device data");
++ of_node_put(mdio_node);
++ err = -EIO;
++ goto err_mdiobus_init_fail;
++ }
++
++ miibus = mdio_data->mii_bus;
++ }
++
++ for_each_available_child_of_node(np, pnp) {
++ const char *mac_addr;
++
++ /* this check is needed if parent and daughter dts have
++ * different number of gmac nodes
++ */
++ if (idx_mac == edma_cinfo->num_gmac) {
++ of_node_put(np);
++ break;
++ }
++
++ mac_addr = of_get_mac_address(pnp);
++ if (mac_addr)
++ memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN);
++
++ idx_mac++;
++ }
++
++ /* Populate the adapter structure register the netdevice */
++ for (i = 0; i < edma_cinfo->num_gmac; i++) {
++ int k, m;
++
++ adapter[i] = netdev_priv(edma_netdev[i]);
++ adapter[i]->netdev = edma_netdev[i];
++ adapter[i]->pdev = pdev;
++ for (j = 0; j < CONFIG_NR_CPUS; j++) {
++ m = i % 2;
++ adapter[i]->tx_start_offset[j] =
++ ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1));
++ /* Share the queues with available net-devices.
++ * For instance , with 5 net-devices
++ * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13
++ * and eth1/eth3 will get the remaining.
++ */
++ for (k = adapter[i]->tx_start_offset[j]; k <
++ (adapter[i]->tx_start_offset[j] + 2); k++) {
++ if (edma_fill_netdev(edma_cinfo, k, i, j)) {
++ pr_err("Netdev overflow Error\n");
++ goto err_register;
++ }
++ }
++ }
++
++ adapter[i]->edma_cinfo = edma_cinfo;
++ edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops;
++ edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
++ | NETIF_F_HW_VLAN_CTAG_TX
++ | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
++ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO;
++ edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
++ NETIF_F_HW_VLAN_CTAG_RX
++ | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
++ NETIF_F_GRO;
++ edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG |
++ NETIF_F_TSO | NETIF_F_TSO6 |
++ NETIF_F_GRO;
++ edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
++ NETIF_F_TSO | NETIF_F_TSO6 |
++ NETIF_F_GRO;
++
++#ifdef CONFIG_RFS_ACCEL
++ edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
++ edma_netdev[i]->hw_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
++ edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
++ edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
++#endif
++ edma_set_ethtool_ops(edma_netdev[i]);
++
++ /* This just fill in some default MAC address
++ */
++ if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) {
++ random_ether_addr(edma_netdev[i]->dev_addr);
++ pr_info("EDMA using MAC@ - using");
++ pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n",
++ *(edma_netdev[i]->dev_addr),
++ *(edma_netdev[i]->dev_addr + 1),
++ *(edma_netdev[i]->dev_addr + 2),
++ *(edma_netdev[i]->dev_addr + 3),
++ *(edma_netdev[i]->dev_addr + 4),
++ *(edma_netdev[i]->dev_addr + 5));
++ }
++
++ err = register_netdev(edma_netdev[i]);
++ if (err)
++ goto err_register;
++
++ /* carrier off reporting is important to
++ * ethtool even BEFORE open
++ */
++ netif_carrier_off(edma_netdev[i]);
++
++ /* Allocate reverse irq cpu mapping structure for
++ * receive queues
++ */
++#ifdef CONFIG_RFS_ACCEL
++ edma_netdev[i]->rx_cpu_rmap =
++ alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE);
++ if (!edma_netdev[i]->rx_cpu_rmap) {
++ err = -ENOMEM;
++ goto err_rmap_alloc_fail;
++ }
++#endif
++ }
++
++ for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++)
++ edma_cinfo->portid_netdev_lookup_tbl[i] = NULL;
++
++ for_each_available_child_of_node(np, pnp) {
++ const uint32_t *vlan_tag = NULL;
++ int len;
++
++ /* this check is needed if parent and daughter dts have
++ * different number of gmac nodes
++ */
++ if (idx == edma_cinfo->num_gmac)
++ break;
++
++ /* Populate port-id to netdev lookup table */
++ vlan_tag = of_get_property(pnp, "vlan_tag", &len);
++ if (!vlan_tag) {
++ pr_err("Vlan tag parsing Failed.\n");
++ goto err_rmap_alloc_fail;
++ }
++
++ adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1);
++ vlan_tag++;
++ portid_bmp = of_read_number(vlan_tag, 1);
++ adapter[idx]->dp_bitmap = portid_bmp;
++
++ portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */
++ while (portid_bmp) {
++ int port_bit = ffs(portid_bmp);
++
++ if (port_bit > EDMA_MAX_PORTID_SUPPORTED)
++ goto err_rmap_alloc_fail;
++ edma_cinfo->portid_netdev_lookup_tbl[port_bit] =
++ edma_netdev[idx];
++ portid_bmp &= ~(1 << (port_bit - 1));
++ }
++
++ if (!of_property_read_u32(pnp, "qcom,poll_required",
++ &adapter[idx]->poll_required)) {
++ if (adapter[idx]->poll_required) {
++ of_property_read_u32(pnp, "qcom,phy_mdio_addr",
++ &adapter[idx]->phy_mdio_addr);
++ of_property_read_u32(pnp, "qcom,forced_speed",
++ &adapter[idx]->forced_speed);
++ of_property_read_u32(pnp, "qcom,forced_duplex",
++ &adapter[idx]->forced_duplex);
++
++ /* create a phyid using MDIO bus id
++ * and MDIO bus address
++ */
++ snprintf(adapter[idx]->phy_id,
++ MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
++ miibus->id,
++ adapter[idx]->phy_mdio_addr);
++ }
++ } else {
++ adapter[idx]->poll_required = 0;
++ adapter[idx]->forced_speed = SPEED_1000;
++ adapter[idx]->forced_duplex = DUPLEX_FULL;
++ }
++
++ idx++;
++ }
++
++ edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net,
++ "net/edma",
++ edma_table);
++ if (!edma_cinfo->edma_ctl_table_hdr) {
++ dev_err(&pdev->dev, "edma sysctl table hdr not registered\n");
++ goto err_unregister_sysctl_tbl;
++ }
++
++ /* Disable all 16 Tx and 8 rx irqs */
++ edma_irq_disable(edma_cinfo);
++
++ err = edma_reset(edma_cinfo);
++ if (err) {
++ err = -EIO;
++ goto err_reset;
++ }
++
++ /* populate per_core_info, do a napi_Add, request 16 TX irqs,
++ * 8 RX irqs, do a napi enable
++ */
++ for (i = 0; i < CONFIG_NR_CPUS; i++) {
++ u8 rx_start;
++
++ edma_cinfo->edma_percpu_info[i].napi.state = 0;
++
++ netif_napi_add(edma_netdev[0],
++ &edma_cinfo->edma_percpu_info[i].napi,
++ edma_poll, 64);
++ napi_enable(&edma_cinfo->edma_percpu_info[i].napi);
++ edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i];
++ edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK
++ << (i << EDMA_RX_PER_CPU_MASK_SHIFT);
++ edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i];
++ edma_cinfo->edma_percpu_info[i].rx_start =
++ i << EDMA_RX_CPU_START_SHIFT;
++ rx_start = i << EDMA_RX_CPU_START_SHIFT;
++ edma_cinfo->edma_percpu_info[i].tx_status = 0;
++ edma_cinfo->edma_percpu_info[i].rx_status = 0;
++ edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo;
++
++ /* Request irq per core */
++ for (j = edma_cinfo->edma_percpu_info[i].tx_start;
++ j < tx_start[i] + 4; j++) {
++ sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j);
++ err = request_irq(edma_cinfo->tx_irq[j],
++ edma_interrupt,
++ 0,
++ &edma_tx_irq[j][0],
++ &edma_cinfo->edma_percpu_info[i]);
++ if (err)
++ goto err_reset;
++ }
++
++ for (j = edma_cinfo->edma_percpu_info[i].rx_start;
++ j < (rx_start +
++ ((edma_cinfo->num_rx_queues == 4) ? 1 : 2));
++ j++) {
++ sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j);
++ err = request_irq(edma_cinfo->rx_irq[j],
++ edma_interrupt,
++ 0,
++ &edma_rx_irq[j][0],
++ &edma_cinfo->edma_percpu_info[i]);
++ if (err)
++ goto err_reset;
++ }
++
++#ifdef CONFIG_RFS_ACCEL
++ for (j = edma_cinfo->edma_percpu_info[i].rx_start;
++ j < rx_start + 2; j += 2) {
++ err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap,
++ edma_cinfo->rx_irq[j]);
++ if (err)
++ goto err_rmap_add_fail;
++ }
++#endif
++ }
++
++ /* Used to clear interrupt status, allocate rx buffer,
++ * configure edma descriptors registers
++ */
++ err = edma_configure(edma_cinfo);
++ if (err) {
++ err = -EIO;
++ goto err_configure;
++ }
++
++ /* Configure RSS indirection table.
++ * 128 hash will be configured in the following
++ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
++ * and so on
++ */
++ for (i = 0; i < EDMA_NUM_IDT; i++)
++ edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE);
++
++ /* Configure load balance mapping table.
++ * 4 table entry will be configured according to the
++ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4}
++ * respectively.
++ */
++ edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE);
++
++ /* Configure Virtual queue for Tx rings
++ * User can also change this value runtime through
++ * a sysctl
++ */
++ edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE);
++ edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE);
++
++ /* Configure Max AXI Burst write size to 128 bytes*/
++ edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE,
++ EDMA_AXIW_MAXWRSIZE_VALUE);
++
++ /* Enable All 16 tx and 8 rx irq mask */
++ edma_irq_enable(edma_cinfo);
++ edma_enable_tx_ctrl(&edma_cinfo->hw);
++ edma_enable_rx_ctrl(&edma_cinfo->hw);
++
++ for (i = 0; i < edma_cinfo->num_gmac; i++) {
++ if (adapter[i]->poll_required) {
++ adapter[i]->phydev =
++ phy_connect(edma_netdev[i],
++ (const char *)adapter[i]->phy_id,
++ &edma_adjust_link,
++ PHY_INTERFACE_MODE_SGMII);
++ if (IS_ERR(adapter[i]->phydev)) {
++ dev_dbg(&pdev->dev, "PHY attach FAIL");
++ err = -EIO;
++ goto edma_phy_attach_fail;
++ } else {
++ adapter[i]->phydev->advertising |=
++ ADVERTISED_Pause |
++ ADVERTISED_Asym_Pause;
++ adapter[i]->phydev->supported |=
++ SUPPORTED_Pause |
++ SUPPORTED_Asym_Pause;
++ }
++ } else {
++ adapter[i]->phydev = NULL;
++ }
++ }
++
++ spin_lock_init(&edma_cinfo->stats_lock);
++
++ init_timer(&edma_stats_timer);
++ edma_stats_timer.expires = jiffies + 1*HZ;
++ edma_stats_timer.data = (unsigned long)edma_cinfo;
++ edma_stats_timer.function = edma_statistics_timer; /* timer handler */
++ add_timer(&edma_stats_timer);
++
++ return 0;
++
++edma_phy_attach_fail:
++ miibus = NULL;
++err_configure:
++#ifdef CONFIG_RFS_ACCEL
++ for (i = 0; i < edma_cinfo->num_gmac; i++) {
++ free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap);
++ adapter[i]->netdev->rx_cpu_rmap = NULL;
++ }
++#endif
++err_rmap_add_fail:
++ edma_free_irqs(adapter[0]);
++ for (i = 0; i < CONFIG_NR_CPUS; i++)
++ napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
++err_reset:
++err_unregister_sysctl_tbl:
++err_rmap_alloc_fail:
++ for (i = 0; i < edma_cinfo->num_gmac; i++)
++ unregister_netdev(edma_netdev[i]);
++err_register:
++err_mdiobus_init_fail:
++ edma_free_rx_rings(edma_cinfo);
++err_rx_rinit:
++ edma_free_tx_rings(edma_cinfo);
++err_tx_rinit:
++ edma_free_queues(edma_cinfo);
++err_rx_qinit:
++err_tx_qinit:
++ iounmap(edma_cinfo->hw.hw_addr);
++err_ioremap:
++ for (i = 0; i < edma_cinfo->num_gmac; i++) {
++ if (edma_netdev[i])
++ free_netdev(edma_netdev[i]);
++ }
++err_cinfo:
++ kfree(edma_cinfo);
++err_alloc:
++ return err;
++}
++
++/* edma_axi_remove()
++ * Device Removal Routine
++ *
++ * edma_axi_remove is called by the platform subsystem to alert the driver
++ * that it should release a platform device.
++ */
++static int edma_axi_remove(struct platform_device *pdev)
++{
++ struct edma_adapter *adapter = netdev_priv(edma_netdev[0]);
++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
++ struct edma_hw *hw = &edma_cinfo->hw;
++ int i;
++
++ for (i = 0; i < edma_cinfo->num_gmac; i++)
++ unregister_netdev(edma_netdev[i]);
++
++ edma_stop_rx_tx(hw);
++ for (i = 0; i < CONFIG_NR_CPUS; i++)
++ napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
++
++ edma_irq_disable(edma_cinfo);
++ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
++ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
++#ifdef CONFIG_RFS_ACCEL
++ for (i = 0; i < edma_cinfo->num_gmac; i++) {
++ free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap);
++ edma_netdev[i]->rx_cpu_rmap = NULL;
++ }
++#endif
++
++ for (i = 0; i < edma_cinfo->num_gmac; i++) {
++ struct edma_adapter *adapter = netdev_priv(edma_netdev[i]);
++
++ if (adapter->phydev)
++ phy_disconnect(adapter->phydev);
++ }
++
++ del_timer_sync(&edma_stats_timer);
++ edma_free_irqs(adapter);
++ unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
++ edma_free_tx_resources(edma_cinfo);
++ edma_free_rx_resources(edma_cinfo);
++ edma_free_tx_rings(edma_cinfo);
++ edma_free_rx_rings(edma_cinfo);
++ edma_free_queues(edma_cinfo);
++ for (i = 0; i < edma_cinfo->num_gmac; i++)
++ free_netdev(edma_netdev[i]);
++
++ kfree(edma_cinfo);
++
++ return 0;
++}
++
++static const struct of_device_id edma_of_mtable[] = {
++ {.compatible = "qcom,ess-edma" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, edma_of_mtable);
++
++static struct platform_driver edma_axi_driver = {
++ .driver = {
++ .name = edma_axi_driver_name,
++ .of_match_table = edma_of_mtable,
++ },
++ .probe = edma_axi_probe,
++ .remove = edma_axi_remove,
++};
++
++module_platform_driver(edma_axi_driver);
++
++MODULE_AUTHOR("Qualcomm Atheros Inc");
++MODULE_DESCRIPTION("QCA ESS EDMA driver");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
+@@ -0,0 +1,374 @@
++/*
++ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for
++ * any purpose with or without fee is hereby granted, provided that the
++ * above copyright notice and this permission notice appear in all copies.
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/ethtool.h>
++#include <linux/netdevice.h>
++#include <linux/string.h>
++#include "edma.h"
++
++struct edma_ethtool_stats {
++ uint8_t stat_string[ETH_GSTRING_LEN];
++ uint32_t stat_offset;
++};
++
++#define EDMA_STAT(m) offsetof(struct edma_ethtool_statistics, m)
++#define DRVINFO_LEN 32
++
++/* Array of strings describing statistics
++ */
++static const struct edma_ethtool_stats edma_gstrings_stats[] = {
++ {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)},
++ {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)},
++ {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)},
++ {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)},
++ {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)},
++ {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)},
++ {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)},
++ {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)},
++ {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)},
++ {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)},
++ {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)},
++ {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)},
++ {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)},
++ {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)},
++ {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)},
++ {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)},
++ {"tx_q0_byte", EDMA_STAT(tx_q0_byte)},
++ {"tx_q1_byte", EDMA_STAT(tx_q1_byte)},
++ {"tx_q2_byte", EDMA_STAT(tx_q2_byte)},
++ {"tx_q3_byte", EDMA_STAT(tx_q3_byte)},
++ {"tx_q4_byte", EDMA_STAT(tx_q4_byte)},
++ {"tx_q5_byte", EDMA_STAT(tx_q5_byte)},
++ {"tx_q6_byte", EDMA_STAT(tx_q6_byte)},
++ {"tx_q7_byte", EDMA_STAT(tx_q7_byte)},
++ {"tx_q8_byte", EDMA_STAT(tx_q8_byte)},
++ {"tx_q9_byte", EDMA_STAT(tx_q9_byte)},
++ {"tx_q10_byte", EDMA_STAT(tx_q10_byte)},
++ {"tx_q11_byte", EDMA_STAT(tx_q11_byte)},
++ {"tx_q12_byte", EDMA_STAT(tx_q12_byte)},
++ {"tx_q13_byte", EDMA_STAT(tx_q13_byte)},
++ {"tx_q14_byte", EDMA_STAT(tx_q14_byte)},
++ {"tx_q15_byte", EDMA_STAT(tx_q15_byte)},
++ {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)},
++ {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)},
++ {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)},
++ {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)},
++ {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)},
++ {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)},
++ {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)},
++ {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)},
++ {"rx_q0_byte", EDMA_STAT(rx_q0_byte)},
++ {"rx_q1_byte", EDMA_STAT(rx_q1_byte)},
++ {"rx_q2_byte", EDMA_STAT(rx_q2_byte)},
++ {"rx_q3_byte", EDMA_STAT(rx_q3_byte)},
++ {"rx_q4_byte", EDMA_STAT(rx_q4_byte)},
++ {"rx_q5_byte", EDMA_STAT(rx_q5_byte)},
++ {"rx_q6_byte", EDMA_STAT(rx_q6_byte)},
++ {"rx_q7_byte", EDMA_STAT(rx_q7_byte)},
++ {"tx_desc_error", EDMA_STAT(tx_desc_error)},
++};
++
++#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats)
++
++/* edma_get_strset_count()
++ * Get strset count
++ */
++static int edma_get_strset_count(struct net_device *netdev,
++ int sset)
++{
++ switch (sset) {
++ case ETH_SS_STATS:
++ return EDMA_STATS_LEN;
++ default:
++ netdev_dbg(netdev, "%s: Invalid string set", __func__);
++ return -EOPNOTSUPP;
++ }
++}
++
++
++/* edma_get_strings()
++ * get stats string
++ */
++static void edma_get_strings(struct net_device *netdev, uint32_t stringset,
++ uint8_t *data)
++{
++ uint8_t *p = data;
++ uint32_t i;
++
++ switch (stringset) {
++ case ETH_SS_STATS:
++ for (i = 0; i < EDMA_STATS_LEN; i++) {
++ memcpy(p, edma_gstrings_stats[i].stat_string,
++ min((size_t)ETH_GSTRING_LEN,
++ strlen(edma_gstrings_stats[i].stat_string)
++ + 1));
++ p += ETH_GSTRING_LEN;
++ }
++ break;
++ }
++}
++
++/* edma_get_ethtool_stats()
++ * Get ethtool statistics
++ */
++static void edma_get_ethtool_stats(struct net_device *netdev,
++ struct ethtool_stats *stats, uint64_t *data)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
++ int i;
++ uint8_t *p = NULL;
++
++ edma_read_append_stats(edma_cinfo);
++
++ for(i = 0; i < EDMA_STATS_LEN; i++) {
++ p = (uint8_t *)&(edma_cinfo->edma_ethstats) +
++ edma_gstrings_stats[i].stat_offset;
++ data[i] = *(uint32_t *)p;
++ }
++}
++
++/* edma_get_drvinfo()
++ * get edma driver info
++ */
++static void edma_get_drvinfo(struct net_device *dev,
++ struct ethtool_drvinfo *info)
++{
++ strlcpy(info->driver, "ess_edma", DRVINFO_LEN);
++ strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN);
++}
++
++/* edma_nway_reset()
++ * Reset the phy, if available.
++ */
++static int edma_nway_reset(struct net_device *netdev)
++{
++ return -EINVAL;
++}
++
++/* edma_get_wol()
++ * get wake on lan info
++ */
++static void edma_get_wol(struct net_device *netdev,
++ struct ethtool_wolinfo *wol)
++{
++ wol->supported = 0;
++ wol->wolopts = 0;
++}
++
++/* edma_get_msglevel()
++ * get message level.
++ */
++static uint32_t edma_get_msglevel(struct net_device *netdev)
++{
++ return 0;
++}
++
++/* edma_get_settings()
++ * Get edma settings
++ */
++static int edma_get_settings(struct net_device *netdev,
++ struct ethtool_cmd *ecmd)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++
++ if (adapter->poll_required) {
++ struct phy_device *phydev = NULL;
++ uint16_t phyreg;
++
++ if ((adapter->forced_speed != SPEED_UNKNOWN)
++ && !(adapter->poll_required))
++ return -EPERM;
++
++ phydev = adapter->phydev;
++
++ ecmd->advertising = phydev->advertising;
++ ecmd->autoneg = phydev->autoneg;
++
++ if (adapter->link_state == __EDMA_LINKDOWN) {
++ ecmd->speed = SPEED_UNKNOWN;
++ ecmd->duplex = DUPLEX_UNKNOWN;
++ } else {
++ ecmd->speed = phydev->speed;
++ ecmd->duplex = phydev->duplex;
++ }
++
++ ecmd->phy_address = adapter->phy_mdio_addr;
++
++ phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA);
++ if (phyreg & LPA_10HALF)
++ ecmd->lp_advertising |= ADVERTISED_10baseT_Half;
++
++ if (phyreg & LPA_10FULL)
++ ecmd->lp_advertising |= ADVERTISED_10baseT_Full;
++
++ if (phyreg & LPA_100HALF)
++ ecmd->lp_advertising |= ADVERTISED_100baseT_Half;
++
++ if (phyreg & LPA_100FULL)
++ ecmd->lp_advertising |= ADVERTISED_100baseT_Full;
++
++ phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000);
++ if (phyreg & LPA_1000HALF)
++ ecmd->lp_advertising |= ADVERTISED_1000baseT_Half;
++
++ if (phyreg & LPA_1000FULL)
++ ecmd->lp_advertising |= ADVERTISED_1000baseT_Full;
++ } else {
++ /* If the speed/duplex for this GMAC is forced and we
++ * are not polling for link state changes, return the
++ * values as specified by platform. This will be true
++ * for GMACs connected to switch, and interfaces that
++ * do not use a PHY.
++ */
++ if (!(adapter->poll_required)) {
++ if (adapter->forced_speed != SPEED_UNKNOWN) {
++ /* set speed and duplex */
++ ethtool_cmd_speed_set(ecmd, SPEED_1000);
++ ecmd->duplex = DUPLEX_FULL;
++
++ /* Populate capabilities advertised by self */
++ ecmd->advertising = 0;
++ ecmd->autoneg = 0;
++ ecmd->port = PORT_TP;
++ ecmd->transceiver = XCVR_EXTERNAL;
++ } else {
++ /* non link polled and non
++ * forced speed/duplex interface
++ */
++ return -EIO;
++ }
++ }
++ }
++
++ return 0;
++}
++
++/* edma_set_settings()
++ * Set EDMA settings
++ */
++static int edma_set_settings(struct net_device *netdev,
++ struct ethtool_cmd *ecmd)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++ struct phy_device *phydev = NULL;
++
++ if ((adapter->forced_speed != SPEED_UNKNOWN) &&
++ !adapter->poll_required)
++ return -EPERM;
++
++ phydev = adapter->phydev;
++ phydev->advertising = ecmd->advertising;
++ phydev->autoneg = ecmd->autoneg;
++ phydev->speed = ethtool_cmd_speed(ecmd);
++ phydev->duplex = ecmd->duplex;
++
++ genphy_config_aneg(phydev);
++
++ return 0;
++}
++
++/* edma_get_coalesce
++ * get interrupt mitigation
++ */
++static int edma_get_coalesce(struct net_device *netdev,
++ struct ethtool_coalesce *ec)
++{
++ u32 reg_val;
++
++ edma_get_tx_rx_coalesce(&reg_val);
++
++ /* We read the Interrupt Moderation Timer(IMT) register value,
++ * use lower 16 bit for rx and higher 16 bit for Tx. We do a
++ * left shift by 1, because IMT resolution timer is 2usecs.
++ * Hence the value given by the register is multiplied by 2 to
++ * get the actual time in usecs.
++ */
++ ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1);
++ ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1);
++
++ return 0;
++}
++
++/* edma_set_coalesce
++ * set interrupt mitigation
++ */
++static int edma_set_coalesce(struct net_device *netdev,
++ struct ethtool_coalesce *ec)
++{
++ if (ec->tx_coalesce_usecs)
++ edma_change_tx_coalesce(ec->tx_coalesce_usecs);
++ if (ec->rx_coalesce_usecs)
++ edma_change_rx_coalesce(ec->rx_coalesce_usecs);
++
++ return 0;
++}
++
++/* edma_set_priv_flags()
++ * Set EDMA private flags
++ */
++static int edma_set_priv_flags(struct net_device *netdev, u32 flags)
++{
++ return 0;
++}
++
++/* edma_get_priv_flags()
++ * get edma driver flags
++ */
++static u32 edma_get_priv_flags(struct net_device *netdev)
++{
++ return 0;
++}
++
++/* edma_get_ringparam()
++ * get ring size
++ */
++static void edma_get_ringparam(struct net_device *netdev,
++ struct ethtool_ringparam *ring)
++{
++ struct edma_adapter *adapter = netdev_priv(netdev);
++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
++
++ ring->tx_max_pending = edma_cinfo->tx_ring_count;
++ ring->rx_max_pending = edma_cinfo->rx_ring_count;
++}
++
++/* Ethtool operations
++ */
++static const struct ethtool_ops edma_ethtool_ops = {
++ .get_drvinfo = &edma_get_drvinfo,
++ .get_link = &ethtool_op_get_link,
++ .get_msglevel = &edma_get_msglevel,
++ .nway_reset = &edma_nway_reset,
++ .get_wol = &edma_get_wol,
++ .get_settings = &edma_get_settings,
++ .set_settings = &edma_set_settings,
++ .get_strings = &edma_get_strings,
++ .get_sset_count = &edma_get_strset_count,
++ .get_ethtool_stats = &edma_get_ethtool_stats,
++ .get_coalesce = &edma_get_coalesce,
++ .set_coalesce = &edma_set_coalesce,
++ .get_priv_flags = edma_get_priv_flags,
++ .set_priv_flags = edma_set_priv_flags,
++ .get_ringparam = edma_get_ringparam,
++};
++
++/* edma_set_ethtool_ops
++ * Set ethtool operations
++ */
++void edma_set_ethtool_ops(struct net_device *netdev)
++{
++ netdev->ethtool_ops = &edma_ethtool_ops;
++}
+--- /dev/null
++++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
+@@ -0,0 +1,332 @@
++/*
++ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for
++ * any purpose with or without fee is hereby granted, provided that the
++ * above copyright notice and this permission notice appear in all copies.
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#ifndef _ESS_EDMA_H_
++#define _ESS_EDMA_H_
++
++#include <linux/types.h>
++
++struct edma_adapter;
++struct edma_hw;
++
++/* register definition */
++#define EDMA_REG_MAS_CTRL 0x0
++#define EDMA_REG_TIMEOUT_CTRL 0x004
++#define EDMA_REG_DBG0 0x008
++#define EDMA_REG_DBG1 0x00C
++#define EDMA_REG_SW_CTRL0 0x100
++#define EDMA_REG_SW_CTRL1 0x104
++
++/* Interrupt Status Register */
++#define EDMA_REG_RX_ISR 0x200
++#define EDMA_REG_TX_ISR 0x208
++#define EDMA_REG_MISC_ISR 0x210
++#define EDMA_REG_WOL_ISR 0x218
++
++#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x)
++
++#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100
++#define EDMA_MISC_ISR_AXIR_ERR 0x00000200
++#define EDMA_MISC_ISR_TXF_DEAD 0x00000400
++#define EDMA_MISC_ISR_AXIW_ERR 0x00000800
++#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000
++
++#define EDMA_WOL_ISR 0x00000001
++
++/* Interrupt Mask Register */
++#define EDMA_REG_MISC_IMR 0x214
++#define EDMA_REG_WOL_IMR 0x218
++
++#define EDMA_RX_IMR_NORMAL_MASK 0x1
++#define EDMA_TX_IMR_NORMAL_MASK 0x1
++#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF
++#define EDMA_WOL_IMR_NORMAL_MASK 0x1
++
++/* Edma receive consumer index */
++#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */
++/* Edma transmit consumer index */
++#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */
++
++/* IRQ Moderator Initial Timer Register */
++#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280
++#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF
++#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0
++#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16
++
++/* Interrupt Control Register */
++#define EDMA_REG_INTR_CTRL 0x284
++#define EDMA_INTR_CLR_TYP_SHIFT 0
++#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1
++#define EDMA_INTR_CLEAR_TYPE_W1 0
++#define EDMA_INTR_CLEAR_TYPE_R 1
++
++/* RX Interrupt Mask Register */
++#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */
++
++/* TX Interrupt mask register */
++#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */
++
++/* Load Ptr Register
++ * Software sets this bit after the initialization of the head and tail
++ */
++#define EDMA_REG_TX_SRAM_PART 0x400
++#define EDMA_LOAD_PTR_SHIFT 16
++
++/* TXQ Control Register */
++#define EDMA_REG_TXQ_CTRL 0x404
++#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10
++#define EDMA_TXQ_CTRL_TXQ_EN 0x20
++#define EDMA_TXQ_CTRL_ENH_MODE 0x40
++#define EDMA_TXQ_CTRL_LS_8023_EN 0x80
++#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100
++#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200
++#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF
++#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF
++#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0
++#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16
++
++#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */
++#define EDMA_TXF_WATER_MARK_MASK 0x0FFF
++#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0
++#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16
++#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000
++
++/* WRR Control Register */
++#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c
++#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410
++#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414
++#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418
++
++/* Weight round robin(WRR), it takes queue as input, and computes
++ * starting bits where we need to write the weight for a particular
++ * queue
++ */
++#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20)
++
++/* Tx Descriptor Control Register */
++#define EDMA_REG_TPD_RING_SIZE 0x41C
++#define EDMA_TPD_RING_SIZE_SHIFT 0
++#define EDMA_TPD_RING_SIZE_MASK 0xFFFF
++
++/* Transmit descriptor base address */
++#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */
++
++/* TPD Index Register */
++#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */
++
++#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF
++#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000
++#define EDMA_TPD_PROD_IDX_MASK 0xFFFF
++#define EDMA_TPD_CONS_IDX_MASK 0xFFFF
++#define EDMA_TPD_PROD_IDX_SHIFT 0
++#define EDMA_TPD_CONS_IDX_SHIFT 16
++
++/* TX Virtual Queue Mapping Control Register */
++#define EDMA_REG_VQ_CTRL0 0x4A0
++#define EDMA_REG_VQ_CTRL1 0x4A4
++
++/* Virtual QID shift, it takes queue as input, and computes
++ * Virtual QID position in virtual qid control register
++ */
++#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24)
++
++/* Virtual Queue Default Value */
++#define EDMA_VQ_REG_VALUE 0x240240
++
++/* Tx side Port Interface Control Register */
++#define EDMA_REG_PORT_CTRL 0x4A8
++#define EDMA_PAD_EN_SHIFT 15
++
++/* Tx side VLAN Configuration Register */
++#define EDMA_REG_VLAN_CFG 0x4AC
++
++#define EDMA_TX_CVLAN 16
++#define EDMA_TX_INS_CVLAN 17
++#define EDMA_TX_CVLAN_TAG_SHIFT 0
++
++#define EDMA_TX_SVLAN 14
++#define EDMA_TX_INS_SVLAN 15
++#define EDMA_TX_SVLAN_TAG_SHIFT 16
++
++/* Tx Queue Packet Statistic Register */
++#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */
++
++#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF
++
++/* Tx Queue Byte Statistic Register */
++#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */
++
++/* Load Balance Based Ring Offset Register */
++#define EDMA_REG_LB_RING 0x800
++#define EDMA_LB_RING_ENTRY_MASK 0xff
++#define EDMA_LB_RING_ID_MASK 0x7
++#define EDMA_LB_RING_PROFILE_ID_MASK 0x3
++#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8
++#define EDMA_LB_RING_ID_OFFSET 0
++#define EDMA_LB_RING_PROFILE_ID_OFFSET 3
++#define EDMA_LB_REG_VALUE 0x6040200
++
++/* Load Balance Priority Mapping Register */
++#define EDMA_REG_LB_PRI_START 0x804
++#define EDMA_REG_LB_PRI_END 0x810
++#define EDMA_LB_PRI_REG_INC 4
++#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4
++#define EDMA_LB_PRI_ENTRY_MASK 0xf
++
++/* RSS Priority Mapping Register */
++#define EDMA_REG_RSS_PRI 0x820
++#define EDMA_RSS_PRI_ENTRY_MASK 0xf
++#define EDMA_RSS_RING_ID_MASK 0x7
++#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4
++
++/* RSS Indirection Register */
++#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */
++#define EDMA_NUM_IDT 16
++#define EDMA_RSS_IDT_VALUE 0x64206420
++
++/* Default RSS Ring Register */
++#define EDMA_REG_DEF_RSS 0x890
++#define EDMA_DEF_RSS_MASK 0x7
++
++/* RSS Hash Function Type Register */
++#define EDMA_REG_RSS_TYPE 0x894
++#define EDMA_RSS_TYPE_NONE 0x01
++#define EDMA_RSS_TYPE_IPV4TCP 0x02
++#define EDMA_RSS_TYPE_IPV6_TCP 0x04
++#define EDMA_RSS_TYPE_IPV4_UDP 0x08
++#define EDMA_RSS_TYPE_IPV6UDP 0x10
++#define EDMA_RSS_TYPE_IPV4 0x20
++#define EDMA_RSS_TYPE_IPV6 0x40
++#define EDMA_RSS_HASH_MODE_MASK 0x7f
++
++#define EDMA_REG_RSS_HASH_VALUE 0x8C0
++
++#define EDMA_REG_RSS_TYPE_RESULT 0x8C4
++
++#define EDMA_HASH_TYPE_START 0
++#define EDMA_HASH_TYPE_END 5
++#define EDMA_HASH_TYPE_SHIFT 12
++
++#define EDMA_RFS_FLOW_ENTRIES 1024
++#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1)
++#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128
++
++/* RFD Base Address Register */
++#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */
++
++/* RFD Index Register */
++#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2))
++
++#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF
++#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000
++#define EDMA_RFD_PROD_IDX_MASK 0xFFF
++#define EDMA_RFD_CONS_IDX_MASK 0xFFF
++#define EDMA_RFD_PROD_IDX_SHIFT 0
++#define EDMA_RFD_CONS_IDX_SHIFT 16
++
++/* Rx Descriptor Control Register */
++#define EDMA_REG_RX_DESC0 0xA10
++#define EDMA_RFD_RING_SIZE_MASK 0xFFF
++#define EDMA_RX_BUF_SIZE_MASK 0xFFFF
++#define EDMA_RFD_RING_SIZE_SHIFT 0
++#define EDMA_RX_BUF_SIZE_SHIFT 16
++
++#define EDMA_REG_RX_DESC1 0xA14
++#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F
++#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F
++#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF
++#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0
++#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8
++#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16
++
++/* RXQ Control Register */
++#define EDMA_REG_RXQ_CTRL 0xA18
++#define EDMA_FIFO_THRESH_TYPE_SHIF 0
++#define EDMA_FIFO_THRESH_128_BYTE 0x0
++#define EDMA_FIFO_THRESH_64_BYTE 0x1
++#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002
++#define EDMA_RXQ_CTRL_EN 0x0000FF00
++
++/* AXI Burst Size Config */
++#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C
++#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0
++
++/* Rx Statistics Register */
++#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */
++#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */
++
++/* WoL Pattern Length Register */
++#define EDMA_REG_WOL_PATTERN_LEN0 0xC00
++#define EDMA_WOL_PT_LEN_MASK 0xFF
++#define EDMA_WOL_PT0_LEN_SHIFT 0
++#define EDMA_WOL_PT1_LEN_SHIFT 8
++#define EDMA_WOL_PT2_LEN_SHIFT 16
++#define EDMA_WOL_PT3_LEN_SHIFT 24
++
++#define EDMA_REG_WOL_PATTERN_LEN1 0xC04
++#define EDMA_WOL_PT4_LEN_SHIFT 0
++#define EDMA_WOL_PT5_LEN_SHIFT 8
++#define EDMA_WOL_PT6_LEN_SHIFT 16
++
++/* WoL Control Register */
++#define EDMA_REG_WOL_CTRL 0xC08
++#define EDMA_WOL_WK_EN 0x00000001
++#define EDMA_WOL_MG_EN 0x00000002
++#define EDMA_WOL_PT0_EN 0x00000004
++#define EDMA_WOL_PT1_EN 0x00000008
++#define EDMA_WOL_PT2_EN 0x00000010
++#define EDMA_WOL_PT3_EN 0x00000020
++#define EDMA_WOL_PT4_EN 0x00000040
++#define EDMA_WOL_PT5_EN 0x00000080
++#define EDMA_WOL_PT6_EN 0x00000100
++
++/* MAC Control Register */
++#define EDMA_REG_MAC_CTRL0 0xC20
++#define EDMA_REG_MAC_CTRL1 0xC24
++
++/* WoL Pattern Register */
++#define EDMA_REG_WOL_PATTERN_START 0x5000
++#define EDMA_PATTERN_PART_REG_OFFSET 0x40
++
++
++/* TX descriptor fields */
++#define EDMA_TPD_HDR_SHIFT 0
++#define EDMA_TPD_PPPOE_EN 0x00000100
++#define EDMA_TPD_IP_CSUM_EN 0x00000200
++#define EDMA_TPD_TCP_CSUM_EN 0x0000400
++#define EDMA_TPD_UDP_CSUM_EN 0x00000800
++#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00
++#define EDMA_TPD_LSO_EN 0x00001000
++#define EDMA_TPD_LSO_V2_EN 0x00002000
++#define EDMA_TPD_IPV4_EN 0x00010000
++#define EDMA_TPD_MSS_MASK 0x1FFF
++#define EDMA_TPD_MSS_SHIFT 18
++#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18
++
++/* RRD descriptor fields */
++#define EDMA_RRD_NUM_RFD_MASK 0x000F
++#define EDMA_RRD_SVLAN 0x8000
++#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF;
++
++#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF
++#define EDMA_RRD_CSUM_FAIL_MASK 0xC000
++#define EDMA_RRD_CVLAN 0x0001
++#define EDMA_RRD_DESC_VALID 0x8000
++
++#define EDMA_RRD_PRIORITY_SHIFT 4
++#define EDMA_RRD_PRIORITY_MASK 0x7
++#define EDMA_RRD_PORT_TYPE_SHIFT 7
++#define EDMA_RRD_PORT_TYPE_MASK 0x1F
++#endif /* _ESS_EDMA_H_ */
diff --git a/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch
new file mode 100644
index 0000000000..ad3c9fc309
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch
@@ -0,0 +1,92 @@
+From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 20 Nov 2016 01:01:10 +0100
+Subject: [PATCH] dts: ipq4019: add ethernet essedma node
+
+This patch adds the device-tree node for the ethernet
+interfaces.
+
+Note: The driver isn't anywhere close to be upstream,
+so the info might change.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 60 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -26,6 +26,8 @@
+ aliases {
+ spi0 = &spi_0;
+ i2c0 = &i2c_0;
++ ethernet0 = &gmac0;
++ ethernet1 = &gmac1;
+ };
+
+ cpus {
+@@ -372,6 +374,64 @@
+ status = "disabled";
+ };
+
++ edma@c080000 {
++ compatible = "qcom,ess-edma";
++ reg = <0xc080000 0x8000>;
++ qcom,page-mode = <0>;
++ qcom,rx_head_buf_size = <1540>;
++ qcom,mdio_supported;
++ qcom,poll_required = <1>;
++ qcom,num_gmac = <2>;
++ interrupts = <0 65 IRQ_TYPE_EDGE_RISING
++ 0 66 IRQ_TYPE_EDGE_RISING
++ 0 67 IRQ_TYPE_EDGE_RISING
++ 0 68 IRQ_TYPE_EDGE_RISING
++ 0 69 IRQ_TYPE_EDGE_RISING
++ 0 70 IRQ_TYPE_EDGE_RISING
++ 0 71 IRQ_TYPE_EDGE_RISING
++ 0 72 IRQ_TYPE_EDGE_RISING
++ 0 73 IRQ_TYPE_EDGE_RISING
++ 0 74 IRQ_TYPE_EDGE_RISING
++ 0 75 IRQ_TYPE_EDGE_RISING
++ 0 76 IRQ_TYPE_EDGE_RISING
++ 0 77 IRQ_TYPE_EDGE_RISING
++ 0 78 IRQ_TYPE_EDGE_RISING
++ 0 79 IRQ_TYPE_EDGE_RISING
++ 0 80 IRQ_TYPE_EDGE_RISING
++ 0 240 IRQ_TYPE_EDGE_RISING
++ 0 241 IRQ_TYPE_EDGE_RISING
++ 0 242 IRQ_TYPE_EDGE_RISING
++ 0 243 IRQ_TYPE_EDGE_RISING
++ 0 244 IRQ_TYPE_EDGE_RISING
++ 0 245 IRQ_TYPE_EDGE_RISING
++ 0 246 IRQ_TYPE_EDGE_RISING
++ 0 247 IRQ_TYPE_EDGE_RISING
++ 0 248 IRQ_TYPE_EDGE_RISING
++ 0 249 IRQ_TYPE_EDGE_RISING
++ 0 250 IRQ_TYPE_EDGE_RISING
++ 0 251 IRQ_TYPE_EDGE_RISING
++ 0 252 IRQ_TYPE_EDGE_RISING
++ 0 253 IRQ_TYPE_EDGE_RISING
++ 0 254 IRQ_TYPE_EDGE_RISING
++ 0 255 IRQ_TYPE_EDGE_RISING>;
++
++ status = "disabled";
++
++ gmac0: gmac0 {
++ local-mac-address = [00 00 00 00 00 00];
++ vlan_tag = <1 0x1f>;
++ };
++
++ gmac1: gmac1 {
++ local-mac-address = [00 00 00 00 00 00];
++ qcom,phy_mdio_addr = <4>;
++ qcom,poll_required = <1>;
++ qcom,forced_speed = <1000>;
++ qcom,forced_duplex = <1>;
++ vlan_tag = <2 0x20>;
++ };
++ };
++
+ usb3_ss_phy: ssphy@9a000 {
+ compatible = "qca,uni-ssphy";
+ reg = <0x9a000 0x800>;
diff --git a/target/linux/ipq806x/patches-4.9/0023-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch b/target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch
index e8f4bfc3b1..3636c5ca01 100644
--- a/target/linux/ipq806x/patches-4.9/0023-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch
+++ b/target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch
@@ -1,18 +1,24 @@
-From 04d3f9be0ce80fac99d4ca1f46faf3605258ca1f Mon Sep 17 00:00:00 2001
+From e73682ec4455c34f3f3edc7f40d90ed297521012 Mon Sep 17 00:00:00 2001
From: Senthilkumar N L <snlakshm@codeaurora.org>
Date: Tue, 6 Jan 2015 12:52:23 +0530
-Subject: [PATCH 23/69] qcom: ipq4019: Add IPQ4019 USB HS/SS PHY drivers
+Subject: [PATCH] qcom: ipq4019: Add IPQ4019 USB HS/SS PHY drivers
These drivers handles control and configuration of the HS
and SS USB PHY transceivers.
Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+
+---
+Changed:
+ - replaced spaces with tabs
+ - remove emulation and host variables
---
drivers/usb/phy/Kconfig | 11 ++
drivers/usb/phy/Makefile | 2 +
- drivers/usb/phy/phy-qca-baldur.c | 262 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/phy/phy-qca-uniphy.c | 171 +++++++++++++++++++++++++
- 4 files changed, 446 insertions(+)
+ drivers/usb/phy/phy-qca-baldur.c | 233 +++++++++++++++++++++++++++++++++++++++
+ drivers/usb/phy/phy-qca-uniphy.c | 141 +++++++++++++++++++++++
+ 4 files changed, 387 insertions(+)
create mode 100644 drivers/usb/phy/phy-qca-baldur.c
create mode 100644 drivers/usb/phy/phy-qca-uniphy.c
@@ -42,14 +48,14 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o
obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o
obj-$(CONFIG_USB_QCOM_8X16_PHY) += phy-qcom-8x16-usb.o
-+obj-$(CONFIG_USB_IPQ4019_PHY) += phy-qca-baldur.o
-+obj-$(CONFIG_USB_IPQ4019_PHY) += phy-qca-uniphy.o
++obj-$(CONFIG_USB_IPQ4019_PHY) += phy-qca-baldur.o
++obj-$(CONFIG_USB_IPQ4019_PHY) += phy-qca-uniphy.o
obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o
obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
--- /dev/null
+++ b/drivers/usb/phy/phy-qca-baldur.c
-@@ -0,0 +1,262 @@
+@@ -0,0 +1,233 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
@@ -88,29 +94,13 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+#define PHY_MISC_ADDR 0x024
+#define PHY_IPG_ADDR 0x030
+
-+#define PHY_CTRL0_EMU_ADDR 0x180
-+#define PHY_CTRL1_EMU_ADDR 0x184
-+#define PHY_CTRL2_EMU_ADDR 0x188
-+#define PHY_CTRL3_EMU_ADDR 0x18C
-+#define PHY_CTRL4_EMU_ADDR 0x190
-+#define PHY_MISC_EMU_ADDR 0x1A4
-+#define PHY_IPG_EMU_ADDR 0x1B0
-+
+#define PHY_CTRL0_VAL 0xA4600015
+#define PHY_CTRL1_VAL 0x09500000
+#define PHY_CTRL2_VAL 0x00058180
+#define PHY_CTRL3_VAL 0x6DB6DCD6
+#define PHY_CTRL4_VAL 0x836DB6DB
+#define PHY_MISC_VAL 0x3803FB0C
-+#define PHY_IPG_VAL 0x47323232
-+
-+#define PHY_CTRL0_EMU_VAL 0xb4000015
-+#define PHY_CTRL1_EMU_VAL 0x09500000
-+#define PHY_CTRL2_EMU_VAL 0x00058180
-+#define PHY_CTRL3_EMU_VAL 0x6DB6DCD6
-+#define PHY_CTRL4_EMU_VAL 0x836DB6DB
-+#define PHY_MISC_EMU_VAL 0x3803FB0C
-+#define PHY_IPG_EMU_VAL 0x47323232
++#define PHY_IPG_VAL 0x47323232
+
+#define USB30_HS_PHY_HOST_MODE (0x01 << 21)
+#define USB20_HS_PHY_HOST_MODE (0x01 << 5)
@@ -131,12 +121,10 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+ struct reset_control *por_rst;
+ struct reset_control *srif_rst;
+
-+ unsigned int host;
-+ unsigned int emulation;
+ const struct qca_baldur_hs_data *data;
+};
+
-+#define phy_to_dw_phy(x) container_of((x), struct qca_baldur_hs_phy, phy)
++#define phy_to_dw_phy(x) container_of((x), struct qca_baldur_hs_phy, phy)
+
+static int qca_baldur_phy_read(struct usb_phy *x, u32 reg)
+{
@@ -155,7 +143,7 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+
+static int qca_baldur_hs_phy_init(struct usb_phy *x)
+{
-+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
++ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
+
+ /* assert HS PHY POR reset */
+ reset_control_assert(phy->por_rst);
@@ -169,25 +157,14 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+ reset_control_deassert(phy->srif_rst);
+ msleep(10);
+
-+ if (!phy->emulation) {
-+ /* perform PHY register writes */
-+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
-+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
-+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
-+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
-+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
-+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
-+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
-+ } else {
-+ /* perform PHY register writes */
-+ writel(PHY_CTRL0_EMU_VAL, phy->base + PHY_CTRL0_EMU_ADDR);
-+ writel(PHY_CTRL1_EMU_VAL, phy->base + PHY_CTRL1_EMU_ADDR);
-+ writel(PHY_CTRL2_EMU_VAL, phy->base + PHY_CTRL2_EMU_ADDR);
-+ writel(PHY_CTRL3_EMU_VAL, phy->base + PHY_CTRL3_EMU_ADDR);
-+ writel(PHY_CTRL4_EMU_VAL, phy->base + PHY_CTRL4_EMU_ADDR);
-+ writel(PHY_MISC_EMU_VAL, phy->base + PHY_MISC_EMU_ADDR);
-+ writel(PHY_IPG_EMU_VAL, phy->base + PHY_IPG_EMU_ADDR);
-+ }
++ /* perform PHY register writes */
++ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
++ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
++ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
++ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
++ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
++ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
++ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
+
+ msleep(10);
+
@@ -234,7 +211,7 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+
+static void qca_baldur_hs_phy_shutdown(struct usb_phy *x)
+{
-+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
++ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
+
+ qca_baldur_hs_put_resources(phy);
+}
@@ -286,12 +263,12 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+ return err;
+ }
+
-+ phy->phy.dev = phy->dev;
-+ phy->phy.label = "qca-baldur-hsphy";
-+ phy->phy.init = qca_baldur_hs_phy_init;
-+ phy->phy.shutdown = qca_baldur_hs_phy_shutdown;
-+ phy->phy.type = USB_PHY_TYPE_USB2;
-+ phy->phy.io_ops = &qca_baldur_io_ops;
++ phy->phy.dev = phy->dev;
++ phy->phy.label = "qca-baldur-hsphy";
++ phy->phy.init = qca_baldur_hs_phy_init;
++ phy->phy.shutdown = qca_baldur_hs_phy_shutdown;
++ phy->phy.type = USB_PHY_TYPE_USB2;
++ phy->phy.io_ops = &qca_baldur_io_ops;
+
+ err = usb_add_phy_dev(&phy->phy);
+ return err;
@@ -314,7 +291,7 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+MODULE_DESCRIPTION("USB3 QCA BALDUR HSPHY driver");
--- /dev/null
+++ b/drivers/usb/phy/phy-qca-uniphy.c
-@@ -0,0 +1,171 @@
+@@ -0,0 +1,135 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
@@ -349,37 +326,9 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+ void __iomem *base;
+
+ struct reset_control *por_rst;
-+
-+ unsigned int host;
+};
+
-+#define phy_to_dw_phy(x) container_of((x), struct qca_uni_ss_phy, phy)
-+
-+/**
-+ * Write register
-+ *
-+ * @base - PHY base virtual address.
-+ * @offset - register offset.
-+ */
-+static u32 qca_uni_ss_read(void __iomem *base, u32 offset)
-+{
-+ u32 value;
-+ value = readl_relaxed(base + offset);
-+ return value;
-+}
-+
-+/**
-+ * Write register
-+ *
-+ * @base - PHY base virtual address.
-+ * @offset - register offset.
-+ * @val - value to write.
-+ */
-+static void qca_uni_ss_write(void __iomem *base, u32 offset, u32 val)
-+{
-+ writel(val, base + offset);
-+ udelay(100);
-+}
++#define phy_to_dw_phy(x) container_of((x), struct qca_uni_ss_phy, phy)
+
+static void qca_uni_ss_phy_shutdown(struct usb_phy *x)
+{
@@ -396,9 +345,7 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+ /* assert SS PHY POR reset */
+ reset_control_assert(phy->por_rst);
+
-+ msleep(10);
-+
-+ msleep(10);
++ msleep(20);
+
+ /* deassert SS PHY POR reset */
+ reset_control_deassert(phy->por_rst);
@@ -439,15 +386,9 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+
+static int qca_uni_ss_probe(struct platform_device *pdev)
+{
-+ const struct of_device_id *match;
-+ struct device_node *np = pdev->dev.of_node;
-+ struct qca_uni_ss_phy *phy;
++ struct qca_uni_ss_phy *phy;
+ int ret;
+
-+ match = of_match_device(qca_uni_ss_id_table, &pdev->dev);
-+ if (!match)
-+ return -ENODEV;
-+
+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
@@ -461,22 +402,22 @@ Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+ return ret;
+ }
+
-+ phy->phy.dev = phy->dev;
-+ phy->phy.label = "qca-uni-ssphy";
-+ phy->phy.init = qca_uni_ss_phy_init;
-+ phy->phy.shutdown = qca_uni_ss_phy_shutdown;
-+ phy->phy.type = USB_PHY_TYPE_USB3;
++ phy->phy.dev = phy->dev;
++ phy->phy.label = "qca-uni-ssphy";
++ phy->phy.init = qca_uni_ss_phy_init;
++ phy->phy.shutdown = qca_uni_ss_phy_shutdown;
++ phy->phy.type = USB_PHY_TYPE_USB3;
+
+ ret = usb_add_phy_dev(&phy->phy);
+ return ret;
+}
+
+static struct platform_driver qca_uni_ss_driver = {
-+ .probe = qca_uni_ss_probe,
-+ .remove = qca_uni_ss_remove,
-+ .driver = {
-+ .name = "qca-uni-ssphy",
-+ .owner = THIS_MODULE,
++ .probe = qca_uni_ss_probe,
++ .remove = qca_uni_ss_remove,
++ .driver = {
++ .name = "qca-uni-ssphy",
++ .owner = THIS_MODULE,
+ .of_match_table = qca_uni_ss_id_table,
+ },
+};
diff --git a/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch b/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch
new file mode 100644
index 0000000000..18591b205f
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch
@@ -0,0 +1,25 @@
+From 08c18ab774368feb610d1eb952957bb1bb35129f Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sat, 19 Nov 2016 00:52:35 +0100
+Subject: [PATCH 37/38] usb: dwc3: register qca,ipq4019-dwc3 in dwc3-of-simple
+
+For host mode, the dwc3 found in the IPQ4019 can be driven
+by the dwc3-of-simple module. It will get more tricky for
+OTG since they'll need to enable VBUS and reconfigure the
+registers.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+---
+ drivers/usb/dwc3/dwc3-of-simple.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/usb/dwc3/dwc3-of-simple.c
++++ b/drivers/usb/dwc3/dwc3-of-simple.c
+@@ -174,6 +174,7 @@ static const struct dev_pm_ops dwc3_of_s
+
+ static const struct of_device_id of_dwc3_simple_match[] = {
+ { .compatible = "qcom,dwc3" },
++ { .compatible = "qca,ipq4019-dwc3" },
+ { .compatible = "rockchip,rk3399-dwc3" },
+ { .compatible = "xlnx,zynqmp-dwc3" },
+ { .compatible = "cavium,octeon-7130-usb-uctl" },
diff --git a/target/linux/ipq806x/patches-4.9/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-4.9/850-soc-add-qualcomm-syscon.patch
new file mode 100644
index 0000000000..beb85e7efb
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/850-soc-add-qualcomm-syscon.patch
@@ -0,0 +1,177 @@
+From: Christian Lamparter <chunkeey@googlemail.com>
+Subject: SoC: add qualcomm syscon
+--- a/drivers/soc/qcom/Makefile
++++ b/drivers/soc/qcom/Makefile
+@@ -7,3 +7,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st
+ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
+ obj-$(CONFIG_QCOM_SMSM) += smsm.o
+ obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
++obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
+--- a/drivers/soc/qcom/Kconfig
++++ b/drivers/soc/qcom/Kconfig
+@@ -70,6 +70,13 @@ config QCOM_SMSM
+ Say yes here to support the Qualcomm Shared Memory State Machine.
+ The state machine is represented by bits in shared memory.
+
++config QCOM_TCSR
++ tristate "QCOM Top Control and Status Registers"
++ depends on ARCH_QCOM
++ help
++ Say y here to enable TCSR support. The TCSR provides control
++ functions for various peripherals.
++
+ config QCOM_WCNSS_CTRL
+ tristate "Qualcomm WCNSS control driver"
+ depends on QCOM_SMD
+--- /dev/null
++++ b/drivers/soc/qcom/qcom_tcsr.c
+@@ -0,0 +1,98 @@
++/*
++ * Copyright (c) 2014, The Linux foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License rev 2 and
++ * only rev 2 as published by the free Software foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++
++#define TCSR_USB_PORT_SEL 0xb0
++#define TCSR_USB_HSPHY_CONFIG 0xC
++
++#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0
++#define TCSR_ESS_INTERFACE_SEL_MASK 0xf
++
++#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0
++#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4
++#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4
++
++static int tcsr_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ const struct device_node *node = pdev->dev.of_node;
++ void __iomem *base;
++ u32 val;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
++ dev_err(&pdev->dev, "setting usb port select = %d\n", val);
++ writel(val, base + TCSR_USB_PORT_SEL);
++ }
++
++ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) {
++ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val);
++ writel(val, base + TCSR_USB_HSPHY_CONFIG);
++ }
++
++ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) {
++ u32 tmp = 0;
++ dev_info(&pdev->dev, "setting ess interface select = %x\n", val);
++ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET);
++ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK);
++ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK);
++ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET);
++ }
++
++ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) {
++ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val);
++ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET);
++ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET);
++ }
++
++ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) {
++ dev_info(&pdev->dev,
++ "setting wifi_noc_memtype_m0_m2 = %x\n", val);
++ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id tcsr_dt_match[] = {
++ { .compatible = "qcom,tcsr", },
++ { },
++};
++
++MODULE_DEVICE_TABLE(of, tcsr_dt_match);
++
++static struct platform_driver tcsr_driver = {
++ .driver = {
++ .name = "tcsr",
++ .owner = THIS_MODULE,
++ .of_match_table = tcsr_dt_match,
++ },
++ .probe = tcsr_probe,
++};
++
++module_platform_driver(tcsr_driver);
++
++MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
++MODULE_DESCRIPTION("QCOM TCSR driver");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/include/dt-bindings/soc/qcom,tcsr.h
+@@ -0,0 +1,48 @@
++/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++#ifndef __DT_BINDINGS_QCOM_TCSR_H
++#define __DT_BINDINGS_QCOM_TCSR_H
++
++#define TCSR_USB_SELECT_USB3_P0 0x1
++#define TCSR_USB_SELECT_USB3_P1 0x2
++#define TCSR_USB_SELECT_USB3_DUAL 0x3
++
++/* IPQ40xx HS PHY Mode Select */
++#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7
++#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7
++
++/* IPQ40xx ess interface mode select */
++#define TCSR_ESS_PSGMII 0
++#define TCSR_ESS_PSGMII_RGMII5 1
++#define TCSR_ESS_PSGMII_RMII0 2
++#define TCSR_ESS_PSGMII_RMII1 4
++#define TCSR_ESS_PSGMII_RMII0_RMII1 6
++#define TCSR_ESS_PSGMII_RGMII4 9
++
++/*
++ * IPQ40xx WiFi Global Config
++ * Bit 30:AXID_EN
++ * Enable AXI master bus Axid translating to confirm all txn submitted by order
++ * Bit 24: Use locally generated socslv_wxi_bvalid
++ * 1: use locally generate socslv_wxi_bvalid for performance.
++ * 0: use SNOC socslv_wxi_bvalid.
++ */
++#define TCSR_WIFI_GLB_CFG 0x41000000
++
++/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */
++#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222
++
++/* TCSR A/B REG */
++#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0
++#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1
++
++#endif