aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/atheros/patches-3.18/105-ar2315_pci.patch44
1 files changed, 23 insertions, 21 deletions
diff --git a/target/linux/atheros/patches-3.18/105-ar2315_pci.patch b/target/linux/atheros/patches-3.18/105-ar2315_pci.patch
index 0d79a3be10..c3456ed2a2 100644
--- a/target/linux/atheros/patches-3.18/105-ar2315_pci.patch
+++ b/target/linux/atheros/patches-3.18/105-ar2315_pci.patch
@@ -10,7 +10,7 @@
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
--- /dev/null
+++ b/arch/mips/pci/pci-ar2315.c
-@@ -0,0 +1,447 @@
+@@ -0,0 +1,428 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
@@ -378,7 +378,6 @@
+static int ar2315_pci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
-+ u32 reg;
+ int res;
+
+ /* Remap PCI config space */
@@ -389,24 +388,6 @@
+ return -ENOMEM;
+ }
+
-+ /* Reset PCI DMA logic */
-+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
-+ msleep(20);
-+ reg &= ~AR2315_RESET_PCIDMA;
-+ ar231x_write_reg(AR2315_RESET, reg);
-+ msleep(20);
-+
-+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
-+ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
-+
-+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
-+ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
-+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
-+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
-+ AR2315_IF_PCI | AR2315_IF_PCI_HOST |
-+ AR2315_IF_PCI_INTR | (AR2315_IF_PCI_CLK_OUTPUT_CLK <<
-+ AR2315_IF_PCI_CLK_SHIFT));
-+
+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
+ AR2315_PCIRST_LOW);
@@ -484,13 +465,34 @@
else if (pending & CAUSEF_IP2)
do_IRQ(AR2315_IRQ_MISC_INTRS);
else if (pending & CAUSEF_IP7)
-@@ -427,4 +431,10 @@ void __init ar2315_arch_init(void)
+@@ -427,4 +431,31 @@ void __init ar2315_arch_init(void)
{
ath25_serial_setup(AR2315_UART0, AR2315_MISC_IRQ_UART0,
ar2315_apb_frequency());
+
+#ifdef CONFIG_PCI_AR2315
+ if (ath25_soc == ATH25_SOC_AR2315) {
++ /* Reset PCI DMA logic */
++ ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
++ msleep(20);
++ ar231x_mask_reg(AR2315_RESET, AR2315_RESET_PCIDMA, 0);
++ msleep(20);
++
++ /* Configure endians */
++ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0, AR2315_CONFIG_PCIAHB |
++ AR2315_CONFIG_PCIAHB_BRIDGE);
++
++ /* Configure as PCI host with DMA */
++ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
++ (AR2315_PCICLK_IN_FREQ_DIV_6 <<
++ AR2315_PCICLK_DIV_S));
++ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
++ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK |
++ AR2315_IF_MASK, AR2315_IF_PCI |
++ AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
++ (AR2315_IF_PCI_CLK_OUTPUT_CLK <<
++ AR2315_IF_PCI_CLK_SHIFT));
++
+ platform_device_register_simple("ar2315-pci", -1, NULL, 0);
+ }
+#endif