aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts22
-rw-r--r--target/linux/ath79/image/nand.mk21
-rw-r--r--target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
3 files changed, 23 insertions, 23 deletions
diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
index ea153d9f77..3e373928da 100644
--- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
+++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
@@ -76,21 +76,21 @@
debounce-interval = <60>;
};
- wifi_button {
- label = "WiFi button";
+ wifi_button {
+ label = "WiFi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
- usb1 {
+ usb1 {
label = "USB1 eject button";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
- usb2 {
- label = "USB2 eject button";
+ usb2 {
+ label = "USB2 eject button";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
@@ -105,7 +105,7 @@
};
&gpio {
- gpio_usb_power {
+ usb_power {
gpio-hog;
gpios = <16 0>;
output-high;
@@ -262,7 +262,7 @@
};
&pcie1 {
- status = "okay";
+ status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
@@ -272,15 +272,15 @@
};
&usb_phy0 {
- status = "okay";
+ status = "okay";
};
&usb_phy1 {
- status = "okay";
+ status = "okay";
};
&usb0 {
- status = "okay";
+ status = "okay";
hub_port0: port@1 {
reg = <1>;
@@ -290,7 +290,7 @@
};
&usb1 {
- status = "okay";
+ status = "okay";
hub_port1: port@1 {
reg = <1>;
diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk
index 0f7514060e..ef6b607002 100644
--- a/target/linux/ath79/image/nand.mk
+++ b/target/linux/ath79/image/nand.mk
@@ -1,15 +1,15 @@
include ./common-netgear.mk # for netgear-uImage
# attention: only zlib compression is allowed for the boot fs
-define Build/zyxel-buildkerneljffs
- rm -rf $(KDIR_TMP)/zyxelnbg6716
- mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
- cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
- $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
- --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
- -o $@ \
- -d $(KDIR_TMP)/zyxelnbg6716/image
- rm -rf $(KDIR_TMP)/zyxelnbg6716
+define Build/zyxel-buildkerneljffs
+ rm -rf $(KDIR_TMP)/zyxelnbg6716
+ mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
+ cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
+ -o $@ \
+ -d $(KDIR_TMP)/zyxelnbg6716/image
+ rm -rf $(KDIR_TMP)/zyxelnbg6716
endef
define Build/zyxel-factory
@@ -94,6 +94,7 @@ TARGET_DEVICES += netgear_wndr4300
define Device/zyxel_nbg6716
ATH_SOC := qca9558
DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NBG6716
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
RAS_BOARD := NBG6716
RAS_ROOTFS_SIZE := 29696k
@@ -104,7 +105,7 @@ define Device/zyxel_nbg6716
KERNEL := kernel-bin | append-dtb | uImage none | \
zyxel-buildkerneljffs | check-size 4096k
IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
- IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | zyxel-factory
UBINIZE_OPTS := -E 5
diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 75fdd42cdd..433d6475dd 100644
--- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -3,7 +3,6 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions/caldata.sh
-. /lib/functions/k2t.sh
board=$(board_name)
@@ -12,7 +11,7 @@ case "$FIRMWARE" in
case $board in
zyxel,nbg6716)
caldata_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
esac
;;