aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ramips/Makefile2
-rw-r--r--target/linux/ramips/mt7620/config-4.4 (renamed from target/linux/ramips/mt7620/config-4.3)19
-rw-r--r--target/linux/ramips/mt7628/config-4.4 (renamed from target/linux/ramips/mt7628/config-4.3)19
-rw-r--r--target/linux/ramips/mt7688/config-4.4 (renamed from target/linux/ramips/mt7688/config-4.3)20
-rw-r--r--target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch437
-rw-r--r--target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch211
-rw-r--r--target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch61
-rw-r--r--target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch857
-rw-r--r--target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch82
-rw-r--r--target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch93
-rw-r--r--target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch21
-rw-r--r--target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch52
-rw-r--r--target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch443
-rw-r--r--target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch44
-rw-r--r--target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch164
-rw-r--r--target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch21
-rw-r--r--target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch28
-rw-r--r--target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch165
-rw-r--r--target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch25
-rw-r--r--target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch22
-rw-r--r--target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch20
-rw-r--r--target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch45
-rw-r--r--target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch79
-rw-r--r--target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch143
-rw-r--r--target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch90
-rw-r--r--target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch21
-rw-r--r--target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch85
-rw-r--r--target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch166
-rw-r--r--target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch526
-rw-r--r--target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch59
-rw-r--r--target/linux/ramips/patches-4.3/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch430
-rw-r--r--target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch405
-rw-r--r--target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch293
-rw-r--r--target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch246
-rw-r--r--target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch29
-rw-r--r--target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch5748
-rw-r--r--target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch53
-rw-r--r--target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch24
-rw-r--r--target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch29
-rw-r--r--target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch70
-rw-r--r--target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch2408
-rw-r--r--target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch4417
-rw-r--r--target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch157
-rw-r--r--target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch44
-rw-r--r--target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch574
-rw-r--r--target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch521
-rw-r--r--target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch398
-rw-r--r--target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch342
-rw-r--r--target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch4823
-rw-r--r--target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch628
-rw-r--r--target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch765
-rw-r--r--target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch227
-rw-r--r--target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch22
-rw-r--r--target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch217
-rw-r--r--target/linux/ramips/patches-4.3/0054-mtd-add-chunked-read-io-to-m25p80.patch123
-rw-r--r--target/linux/ramips/patches-4.3/0055-MIPS-CPS-drop-.set-mips64r2-directives.patch53
-rw-r--r--target/linux/ramips/patches-4.3/0056-cm-intoruce-core-other-locking-functions.patch140
-rw-r--r--target/linux/ramips/patches-4.3/0057-cm-use-core-other-locking-function.patch80
-rw-r--r--target/linux/ramips/patches-4.3/0058-backport-ensure-core-other-GCR-reflect-correct-core.patch49
-rw-r--r--target/linux/ramips/patches-4.3/0059-correct-CPC_BASE_MASK.patch13
-rw-r--r--target/linux/ramips/patches-4.3/0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch12
-rw-r--r--target/linux/ramips/patches-4.3/0064-add_clk_round_rate.patch15
-rw-r--r--target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch89
-rw-r--r--target/linux/ramips/patches-4.3/0066-mt7621-enable-highmem.patch10
-rw-r--r--target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch12
-rw-r--r--target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch27
-rw-r--r--target/linux/ramips/patches-4.3/0103-MIPS-OWRTDTB.patch44
-rw-r--r--target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch40
-rw-r--r--target/linux/ramips/patches-4.3/0200-linkit_bootstrap.patch94
-rw-r--r--target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch150
-rw-r--r--target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch2735
-rw-r--r--target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch691
-rw-r--r--target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch394
-rw-r--r--target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch301
-rw-r--r--target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch351
-rw-r--r--target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch239
-rw-r--r--target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch94
-rw-r--r--target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch519
-rw-r--r--target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch210
-rw-r--r--target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch127
-rw-r--r--target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch80
-rw-r--r--target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch901
-rw-r--r--target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch896
-rw-r--r--target/linux/ramips/patches-4.3/0514-net-mediatek-fix_esw.patch48
-rw-r--r--target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch22
-rw-r--r--target/linux/ramips/patches-4.3/0901-spansion_nand_id_fix.patch43
-rw-r--r--target/linux/ramips/rt288x/config-4.4 (renamed from target/linux/ramips/rt288x/config-4.3)18
-rw-r--r--target/linux/ramips/rt305x/config-4.4 (renamed from target/linux/ramips/rt305x/config-4.3)19
-rw-r--r--target/linux/ramips/rt3883/config-4.4 (renamed from target/linux/ramips/rt3883/config-4.3)18
89 files changed, 65 insertions, 35482 deletions
diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile
index 378e2f5b4a..55a8fd62ed 100644
--- a/target/linux/ramips/Makefile
+++ b/target/linux/ramips/Makefile
@@ -13,7 +13,7 @@ SUBTARGETS:=rt305x mt7620 mt7621 mt7628 mt7688 rt3883 rt288x
FEATURES:=squashfs gpio mips16
MAINTAINER:=John Crispin <blogic@openwrt.org>
-KERNEL_PATCHVER:=4.3
+KERNEL_PATCHVER:=4.4
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
diff --git a/target/linux/ramips/mt7620/config-4.3 b/target/linux/ramips/mt7620/config-4.4
index 2ad77f13af..4bc890ca84 100644
--- a/target/linux/ramips/mt7620/config-4.3
+++ b/target/linux/ramips/mt7620/config-4.4
@@ -1,4 +1,5 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -11,6 +12,7 @@ CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AT803X_PHY=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -20,6 +22,7 @@ CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKEVT_RT3352=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
@@ -57,6 +60,7 @@ CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
# CONFIG_GPIO_MT7621 is not set
@@ -91,6 +95,7 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
@@ -111,11 +116,13 @@ CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
@@ -156,7 +163,6 @@ CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
@@ -173,12 +179,10 @@ CONFIG_RESET_CONTROLLER=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SG_SPLIT is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
CONFIG_SOC_MT7620=y
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
@@ -189,7 +193,6 @@ CONFIG_SPI_MASTER=y
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_RT2880=y
CONFIG_SRCU=y
-# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
diff --git a/target/linux/ramips/mt7628/config-4.3 b/target/linux/ramips/mt7628/config-4.4
index 2c54af9e07..ef282b5f00 100644
--- a/target/linux/ramips/mt7628/config-4.3
+++ b/target/linux/ramips/mt7628/config-4.4
@@ -1,4 +1,5 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -11,6 +12,7 @@ CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AT803X_PHY=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -20,6 +22,7 @@ CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKEVT_RT3352=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
@@ -57,6 +60,7 @@ CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_MT7621=y
@@ -91,6 +95,7 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
@@ -111,11 +116,13 @@ CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
@@ -153,7 +160,6 @@ CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
@@ -170,12 +176,10 @@ CONFIG_RESET_CONTROLLER=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SG_SPLIT is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
CONFIG_SOC_MT7620=y
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
@@ -186,7 +190,6 @@ CONFIG_SPI_MASTER=y
CONFIG_SPI_MT7621=y
# CONFIG_SPI_RT2880 is not set
CONFIG_SRCU=y
-# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
diff --git a/target/linux/ramips/mt7688/config-4.3 b/target/linux/ramips/mt7688/config-4.4
index bbba64a726..c1e8df2bf5 100644
--- a/target/linux/ramips/mt7688/config-4.3
+++ b/target/linux/ramips/mt7688/config-4.4
@@ -1,4 +1,5 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -11,6 +12,7 @@ CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AT803X_PHY=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -20,6 +22,7 @@ CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKEVT_RT3352=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
@@ -57,6 +60,7 @@ CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_MT7621=y
@@ -91,6 +95,7 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
@@ -111,11 +116,13 @@ CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
CONFIG_MIPS_FPU_EMULATOR=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -154,7 +161,6 @@ CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
@@ -174,13 +180,10 @@ CONFIG_RESET_CONTROLLER=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SG_SPLIT is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
CONFIG_SOC_MT7620=y
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
@@ -192,7 +195,6 @@ CONFIG_SPI_MT7621=y
# CONFIG_SPI_RT2880 is not set
CONFIG_SPI_SPIDEV=y
CONFIG_SRCU=y
-# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
diff --git a/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch b/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch
deleted file mode 100644
index dab8e8d2b8..0000000000
--- a/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch
+++ /dev/null
@@ -1,437 +0,0 @@
-From 450b6e8257e22708173d0c1c86d34394fba0c5eb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:08:31 +0100
-Subject: [PATCH 01/53] arch: mips: ralink: add mt7621 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/irq.h | 9 +
- arch/mips/include/asm/mach-ralink/mt7621.h | 39 ++++
- arch/mips/kernel/mips-cm.c | 4 +-
- arch/mips/kernel/vmlinux.lds.S | 1 +
- arch/mips/ralink/Kconfig | 18 ++
- arch/mips/ralink/Makefile | 7 +-
- arch/mips/ralink/Platform | 5 +
- arch/mips/ralink/irq-gic.c | 268 ++++++++++++++++++++++++++++
- arch/mips/ralink/malta-amon.c | 81 +++++++++
- arch/mips/ralink/mt7621.c | 209 ++++++++++++++++++++++
- 10 files changed, 638 insertions(+), 3 deletions(-)
- create mode 100644 arch/mips/include/asm/mach-ralink/irq.h
- create mode 100644 arch/mips/include/asm/mach-ralink/mt7621.h
- create mode 100644 arch/mips/ralink/irq-gic.c
- create mode 100644 arch/mips/ralink/malta-amon.c
- create mode 100644 arch/mips/ralink/mt7621.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/irq.h
-@@ -0,0 +1,9 @@
-+#ifndef __ASM_MACH_RALINK_IRQ_H
-+#define __ASM_MACH_RALINK_IRQ_H
-+
-+#define GIC_NUM_INTRS 64
-+#define NR_IRQS 256
-+
-+#include_next <irq.h>
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
-@@ -0,0 +1,42 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Parts of this file are based on Ralink's 2.6.21 BSP
-+ *
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _MT7621_REGS_H_
-+#define _MT7621_REGS_H_
-+
-+#define MT7621_PALMBUS_BASE 0x1C000000
-+#define MT7621_PALMBUS_SIZE 0x03FFFFFF
-+
-+#define MT7621_SYSC_BASE 0x1E000000
-+
-+#define SYSC_REG_CHIP_NAME0 0x00
-+#define SYSC_REG_CHIP_NAME1 0x04
-+#define SYSC_REG_CHIP_REV 0x0c
-+#define SYSC_REG_SYSTEM_CONFIG0 0x10
-+#define SYSC_REG_SYSTEM_CONFIG1 0x14
-+
-+#define CHIP_REV_PKG_MASK 0x1
-+#define CHIP_REV_PKG_SHIFT 16
-+#define CHIP_REV_VER_MASK 0xf
-+#define CHIP_REV_VER_SHIFT 8
-+#define CHIP_REV_ECO_MASK 0xf
-+
-+#define MT7621_DRAM_BASE 0x0
-+#define MT7621_DDR2_SIZE_MIN 32
-+#define MT7621_DDR2_SIZE_MAX 256
-+
-+#define MT7621_CHIP_NAME0 0x3637544D
-+#define MT7621_CHIP_NAME1 0x20203132
-+
-+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
-+
-+#endif
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -51,6 +51,7 @@ SECTIONS
- /* read-only */
- _text = .; /* Text and read-only data */
- .text : {
-+ /*. = . + 0x8000; */
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -12,6 +12,11 @@ config RALINK_ILL_ACC
- depends on SOC_RT305X
- default y
-
-+config IRQ_INTC
-+ bool
-+ default y
-+ depends on !SOC_MT7621
-+
- choice
- prompt "Ralink SoC selection"
- default SOC_RT305X
-@@ -34,6 +39,16 @@ choice
- config SOC_MT7620
- bool "MT7620/8"
-
-+ config SOC_MT7621
-+ bool "MT7621"
-+ select MIPS_CPU_SCACHE
-+ select SYS_SUPPORTS_MULTITHREADING
-+ select SYS_SUPPORTS_SMP
-+ select SYS_SUPPORTS_MIPS_CPS
-+ select MIPS_GIC
-+ select COMMON_CLK
-+ select CLKSRC_MIPS_GIC
-+ select HW_HAS_PCI
- endchoice
-
- choice
-@@ -65,6 +80,10 @@ choice
- depends on SOC_MT7620
- select BUILTIN_DTB
-
-+ config DTB_MT7621_EVAL
-+ bool "MT7621 eval kit"
-+ depends on SOC_MT7621
-+
- endchoice
-
- endif
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -6,16 +6,24 @@
- # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
- # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-
--obj-y := prom.o of.o reset.o clk.o irq.o timer.o
-+obj-y := prom.o of.o reset.o
-+
-+ifndef CONFIG_MIPS_GIC
-+ obj-y += clk.o timer.o
-+endif
-
- obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
-
- obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
-
-+obj-$(CONFIG_IRQ_INTC) += irq.o
-+obj-$(CONFIG_MIPS_GIC) += irq-gic.o timer-gic.o
-+
- obj-$(CONFIG_SOC_RT288X) += rt288x.o
- obj-$(CONFIG_SOC_RT305X) += rt305x.o
- obj-$(CONFIG_SOC_RT3883) += rt3883.o
- obj-$(CONFIG_SOC_MT7620) += mt7620.o
-+obj-$(CONFIG_SOC_MT7621) += mt7621.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- a/arch/mips/ralink/Platform
-+++ b/arch/mips/ralink/Platform
-@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctr
- #
- load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
- cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
-+
-+# Ralink MT7621
-+#
-+load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000
-+cflags-$(CONFIG_SOC_MT7621) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
---- /dev/null
-+++ b/arch/mips/ralink/irq-gic.c
-@@ -0,0 +1,18 @@
-+#include <linux/init.h>
-+
-+#include <linux/of.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/mips-gic.h>
-+
-+int get_c0_perfcount_int(void)
-+{
-+ return gic_get_c0_perfcount_int();
-+}
-+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-+
-+void __init
-+arch_init_irq(void)
-+{
-+ irqchip_init();
-+}
-+
---- /dev/null
-+++ b/arch/mips/ralink/mt7621.c
-@@ -0,0 +1,223 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Parts of this file are based on Ralink's 2.6.21 BSP
-+ *
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+
-+#include <asm/mipsregs.h>
-+#include <asm/smp-ops.h>
-+#include <asm/mips-cm.h>
-+#include <asm/mips-cpc.h>
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/mt7621.h>
-+
-+#include <pinmux.h>
-+
-+#include "common.h"
-+
-+#define SYSC_REG_SYSCFG 0x10
-+#define SYSC_REG_CPLL_CLKCFG0 0x2c
-+#define SYSC_REG_CUR_CLK_STS 0x44
-+#define CPU_CLK_SEL (BIT(30) | BIT(31))
-+
-+#define MT7621_GPIO_MODE_UART1 1
-+#define MT7621_GPIO_MODE_I2C 2
-+#define MT7621_GPIO_MODE_UART3_MASK 0x3
-+#define MT7621_GPIO_MODE_UART3_SHIFT 3
-+#define MT7621_GPIO_MODE_UART3_GPIO 1
-+#define MT7621_GPIO_MODE_UART2_MASK 0x3
-+#define MT7621_GPIO_MODE_UART2_SHIFT 5
-+#define MT7621_GPIO_MODE_UART2_GPIO 1
-+#define MT7621_GPIO_MODE_JTAG 7
-+#define MT7621_GPIO_MODE_WDT_MASK 0x3
-+#define MT7621_GPIO_MODE_WDT_SHIFT 8
-+#define MT7621_GPIO_MODE_WDT_GPIO 1
-+#define MT7621_GPIO_MODE_PCIE_RST 0
-+#define MT7621_GPIO_MODE_PCIE_REF 2
-+#define MT7621_GPIO_MODE_PCIE_MASK 0x3
-+#define MT7621_GPIO_MODE_PCIE_SHIFT 10
-+#define MT7621_GPIO_MODE_PCIE_GPIO 1
-+#define MT7621_GPIO_MODE_MDIO_MASK 0x3
-+#define MT7621_GPIO_MODE_MDIO_SHIFT 12
-+#define MT7621_GPIO_MODE_MDIO_GPIO 1
-+#define MT7621_GPIO_MODE_RGMII1 14
-+#define MT7621_GPIO_MODE_RGMII2 15
-+#define MT7621_GPIO_MODE_SPI_MASK 0x3
-+#define MT7621_GPIO_MODE_SPI_SHIFT 16
-+#define MT7621_GPIO_MODE_SPI_GPIO 1
-+#define MT7621_GPIO_MODE_SDHCI_MASK 0x3
-+#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
-+#define MT7621_GPIO_MODE_SDHCI_GPIO 1
-+
-+static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
-+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
-+static struct rt2880_pmx_func uart3_grp[] = {
-+ FUNC("uart3", 0, 5, 4),
-+ FUNC("i2s", 2, 5, 4),
-+ FUNC("spdif3", 3, 5, 4),
-+};
-+static struct rt2880_pmx_func uart2_grp[] = {
-+ FUNC("uart2", 0, 9, 4),
-+ FUNC("pcm", 2, 9, 4),
-+ FUNC("spdif2", 3, 9, 4),
-+};
-+static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
-+static struct rt2880_pmx_func wdt_grp[] = {
-+ FUNC("wdt rst", 0, 18, 1),
-+ FUNC("wdt refclk", 2, 18, 1),
-+};
-+static struct rt2880_pmx_func pcie_rst_grp[] = {
-+ FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
-+ FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
-+};
-+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
-+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
-+static struct rt2880_pmx_func spi_grp[] = {
-+ FUNC("spi", 0, 34, 7),
-+ FUNC("nand1", 2, 34, 7),
-+};
-+static struct rt2880_pmx_func sdhci_grp[] = {
-+ FUNC("sdhci", 0, 41, 8),
-+ FUNC("nand2", 2, 41, 8),
-+};
-+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
-+
-+static struct rt2880_pmx_group mt7621_pinmux_data[] = {
-+ GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
-+ GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
-+ GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
-+ MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
-+ GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
-+ MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
-+ GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
-+ GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
-+ MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
-+ GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
-+ MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
-+ GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
-+ MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
-+ GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
-+ GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
-+ MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
-+ GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
-+ MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
-+ GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
-+ { 0 }
-+};
-+
-+phys_addr_t mips_cpc_default_phys_base() {
-+ panic("Cannot detect cpc address");
-+}
-+
-+void __init ralink_clk_init(void)
-+{
-+ int cpu_fdiv = 0;
-+ int cpu_ffrac = 0;
-+ int fbdiv = 0;
-+ u32 clk_sts, syscfg;
-+ u8 clk_sel = 0, xtal_mode;
-+ u32 cpu_clk;
-+
-+ if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
-+ clk_sel = 1;
-+
-+ switch (clk_sel) {
-+ case 0:
-+ clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
-+ cpu_fdiv = ((clk_sts >> 8) & 0x1F);
-+ cpu_ffrac = (clk_sts & 0x1F);
-+ cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
-+ break;
-+
-+ case 1:
-+ fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
-+ syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
-+ xtal_mode = (syscfg >> 6) & 0x7;
-+ if(xtal_mode >= 6) { //25Mhz Xtal
-+ cpu_clk = 25 * fbdiv * 1000 * 1000;
-+ } else if(xtal_mode >=3) { //40Mhz Xtal
-+ cpu_clk = 40 * fbdiv * 1000 * 1000;
-+ } else { // 20Mhz Xtal
-+ cpu_clk = 20 * fbdiv * 1000 * 1000;
-+ }
-+ break;
-+ }
-+}
-+
-+void __init ralink_of_remap(void)
-+{
-+ rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
-+ rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
-+
-+ if (!rt_sysc_membase || !rt_memc_membase)
-+ panic("Failed to remap core resources");
-+}
-+
-+void prom_soc_init(struct ralink_soc_info *soc_info)
-+{
-+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
-+ unsigned char *name = NULL;
-+ u32 n0;
-+ u32 n1;
-+ u32 rev;
-+
-+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-+
-+ if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
-+ name = "MT7621";
-+ soc_info->compatible = "mtk,mt7621-soc";
-+ } else {
-+ panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-+ }
-+
-+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-+
-+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-+ "MediaTek %s ver:%u eco:%u",
-+ name,
-+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
-+ (rev & CHIP_REV_ECO_MASK));
-+
-+ soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
-+ soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
-+ soc_info->mem_base = MT7621_DRAM_BASE;
-+
-+ rt2880_pinmux_data = mt7621_pinmux_data;
-+
-+ /* Early detection of CMP support */
-+ mips_cm_probe();
-+ mips_cpc_probe();
-+
-+ if (mips_cm_numiocu()) {
-+ /* mips_cm_probe() wipes out bootloader
-+ config for CM regions and we have to configure them
-+ again. This SoC cannot talk to pamlbus devices
-+ witout proper iocu region set up.
-+
-+ FIXME: it would be better to do this with values
-+ from DT, but we need this very early because
-+ without this we cannot talk to pretty much anything
-+ including serial.
-+ */
-+ write_gcr_reg0_base(MT7621_PALMBUS_BASE);
-+ write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | CM_GCR_REGn_MASK_CMTGT_IOCU0);
-+ }
-+
-+ if (!register_cps_smp_ops())
-+ return;
-+ if (!register_cmp_smp_ops())
-+ return;
-+ if (!register_vsmp_smp_ops())
-+ return;
-+}
---- /dev/null
-+++ b/arch/mips/ralink/timer-gic.c
-@@ -0,0 +1,15 @@
-+#include <linux/init.h>
-+
-+#include <linux/of.h>
-+#include <linux/clk-provider.h>
-+#include <linux/clocksource.h>
-+
-+#include "common.h"
-+
-+void __init plat_time_init(void)
-+{
-+ ralink_of_remap();
-+
-+ of_clk_init(NULL);
-+ clocksource_of_init();
-+}
diff --git a/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch b/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch
deleted file mode 100644
index d788f2f076..0000000000
--- a/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From c96f2cc4d5f6e1bb11f3e7e04a7e21503a214d7c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 27 Jan 2014 13:12:41 +0000
-Subject: [PATCH 02/53] MIPS: ralink: add MT7621 defconfig
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/configs/mt7621_defconfig | 197 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 197 insertions(+)
- create mode 100644 arch/mips/configs/mt7621_defconfig
-
---- /dev/null
-+++ b/arch/mips/configs/mt7621_defconfig
-@@ -0,0 +1,197 @@
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SYSVIPC=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_RCU_FANOUT=32
-+CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/root-ramips /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
-+CONFIG_INITRAMFS_ROOT_UID=1000
-+CONFIG_INITRAMFS_ROOT_GID=1000
-+# CONFIG_RD_GZIP is not set
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+# CONFIG_AIO is not set
-+CONFIG_EMBEDDED=y
-+# CONFIG_VM_EVENT_COUNTERS is not set
-+# CONFIG_SLUB_DEBUG is not set
-+# CONFIG_COMPAT_BRK is not set
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_BLK_DEV_BSG is not set
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_SMP=y
-+CONFIG_NR_CPUS=4
-+CONFIG_SCHED_SMT=y
-+# CONFIG_COMPACTION is not set
-+# CONFIG_CROSS_MEMORY_ATTACH is not set
-+# CONFIG_SECCOMP is not set
-+CONFIG_HZ_100=y
-+CONFIG_CMDLINE_BOOL=y
-+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_NET=y
-+CONFIG_PACKET=y
-+CONFIG_UNIX=y
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+CONFIG_IP_ADVANCED_ROUTER=y
-+CONFIG_IP_MULTIPLE_TABLES=y
-+CONFIG_IP_ROUTE_MULTIPATH=y
-+CONFIG_IP_ROUTE_VERBOSE=y
-+CONFIG_IP_MROUTE=y
-+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-+CONFIG_ARPD=y
-+CONFIG_SYN_COOKIES=y
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_LRO is not set
-+# CONFIG_INET_DIAG is not set
-+CONFIG_TCP_CONG_ADVANCED=y
-+# CONFIG_TCP_CONG_BIC is not set
-+# CONFIG_TCP_CONG_WESTWOOD is not set
-+# CONFIG_TCP_CONG_HTCP is not set
-+CONFIG_IPV6_PRIVACY=y
-+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET6_XFRM_MODE_BEET is not set
-+# CONFIG_IPV6_SIT is not set
-+CONFIG_IPV6_MULTIPLE_TABLES=y
-+CONFIG_IPV6_SUBTREES=y
-+CONFIG_IPV6_MROUTE=y
-+CONFIG_NETFILTER=y
-+# CONFIG_BRIDGE_NETFILTER is not set
-+CONFIG_NF_CONNTRACK=m
-+CONFIG_NF_CONNTRACK_FTP=m
-+CONFIG_NF_CONNTRACK_IRC=m
-+CONFIG_NETFILTER_XT_MARK=m
-+CONFIG_NETFILTER_XT_TARGET_LOG=m
-+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-+CONFIG_NETFILTER_XT_MATCH_MAC=m
-+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+CONFIG_NETFILTER_XT_MATCH_STATE=m
-+CONFIG_NETFILTER_XT_MATCH_TIME=m
-+CONFIG_NF_CONNTRACK_IPV4=m
-+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-+CONFIG_IP_NF_IPTABLES=m
-+CONFIG_IP_NF_FILTER=m
-+CONFIG_IP_NF_TARGET_REJECT=m
-+CONFIG_NF_NAT_IPV4=m
-+CONFIG_IP_NF_TARGET_MASQUERADE=m
-+CONFIG_IP_NF_TARGET_REDIRECT=m
-+CONFIG_IP_NF_MANGLE=m
-+CONFIG_IP_NF_RAW=m
-+CONFIG_NF_CONNTRACK_IPV6=m
-+CONFIG_IP6_NF_IPTABLES=m
-+CONFIG_IP6_NF_MATCH_AH=m
-+CONFIG_IP6_NF_MATCH_EUI64=m
-+CONFIG_IP6_NF_MATCH_FRAG=m
-+CONFIG_IP6_NF_MATCH_OPTS=m
-+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-+CONFIG_IP6_NF_MATCH_MH=m
-+CONFIG_IP6_NF_MATCH_RT=m
-+CONFIG_IP6_NF_FILTER=m
-+CONFIG_IP6_NF_TARGET_REJECT=m
-+CONFIG_IP6_NF_MANGLE=m
-+CONFIG_IP6_NF_RAW=m
-+CONFIG_BRIDGE=m
-+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-+CONFIG_VLAN_8021Q=y
-+CONFIG_NET_SCHED=y
-+CONFIG_NET_SCH_FQ_CODEL=y
-+CONFIG_HAMRADIO=y
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+# CONFIG_FIRMWARE_IN_KERNEL is not set
-+CONFIG_MTD=y
-+CONFIG_MTD_CMDLINE_PARTS=y
-+CONFIG_MTD_BLOCK=y
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_M25P80=y
-+CONFIG_EEPROM_93CX6=m
-+CONFIG_SCSI=y
-+CONFIG_BLK_DEV_SD=y
-+CONFIG_NETDEVICES=y
-+# CONFIG_NET_PACKET_ENGINE is not set
-+# CONFIG_NET_VENDOR_WIZNET is not set
-+CONFIG_PHYLIB=y
-+CONFIG_SWCONFIG=y
-+CONFIG_PPP=m
-+CONFIG_PPP_FILTER=y
-+CONFIG_PPP_MULTILINK=y
-+CONFIG_PPPOE=m
-+CONFIG_PPP_ASYNC=m
-+CONFIG_ISDN=y
-+# CONFIG_INPUT is not set
-+# CONFIG_SERIO is not set
-+# CONFIG_VT is not set
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_DEVKMEM is not set
-+CONFIG_SERIAL_8250=y
-+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-+CONFIG_SERIAL_8250_CONSOLE=y
-+# CONFIG_SERIAL_8250_PCI is not set
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-+CONFIG_SPI=y
-+CONFIG_GPIOLIB=y
-+CONFIG_GPIO_SYSFS=y
-+# CONFIG_HWMON is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_CORE=y
-+# CONFIG_VGA_ARB is not set
-+CONFIG_USB=y
-+CONFIG_USB_XHCI_HCD=y
-+CONFIG_USB_XHCI_PLATFORM=y
-+CONFIG_USB_MT7621_XHCI_PLATFORM=y
-+CONFIG_USB_STORAGE=y
-+CONFIG_USB_PHY=y
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+CONFIG_LEDS_GPIO=m
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=y
-+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-+CONFIG_STAGING=y
-+CONFIG_USB_DWC2=m
-+# CONFIG_IOMMU_SUPPORT is not set
-+CONFIG_RESET_CONTROLLER=y
-+# CONFIG_FIRMWARE_MEMMAP is not set
-+# CONFIG_DNOTIFY is not set
-+# CONFIG_PROC_PAGE_MONITOR is not set
-+CONFIG_TMPFS=y
-+CONFIG_TMPFS_XATTR=y
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_SUMMARY=y
-+CONFIG_JFFS2_FS_XATTR=y
-+# CONFIG_JFFS2_FS_POSIX_ACL is not set
-+# CONFIG_JFFS2_FS_SECURITY is not set
-+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-+# CONFIG_JFFS2_ZLIB is not set
-+CONFIG_SQUASHFS=y
-+# CONFIG_SQUASHFS_ZLIB is not set
-+CONFIG_SQUASHFS_XZ=y
-+CONFIG_PRINTK_TIME=y
-+# CONFIG_ENABLE_MUST_CHECK is not set
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+CONFIG_STRIP_ASM_SYMS=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_SCHED_DEBUG is not set
-+CONFIG_DEBUG_INFO=y
-+CONFIG_DEBUG_INFO_REDUCED=y
-+CONFIG_RCU_CPU_STALL_TIMEOUT=60
-+# CONFIG_FTRACE is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+# CONFIG_VIRTUALIZATION is not set
-+CONFIG_CRC_ITU_T=m
-+CONFIG_CRC32_SARWATE=y
-+# CONFIG_XZ_DEC_X86 is not set
-+CONFIG_AVERAGE=y
diff --git a/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch b/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch
deleted file mode 100644
index a21f5c6180..0000000000
--- a/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 4d805af8246efdc330d6af9a8bd10ce892327598 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 24 Jan 2014 17:01:17 +0100
-Subject: [PATCH 03/53] MIPS: ralink: cleanup early_printk
-
-Add support for the new MT7621/8 SoC and kill ifdefs.
-Cleanup some whitespace error while we are at it.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/early_printk.c | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/mips/ralink/early_printk.c
-+++ b/arch/mips/ralink/early_printk.c
-@@ -25,11 +25,13 @@
- #define MT7628_CHIP_NAME1 0x20203832
-
- #define UART_REG_TX 0x04
-+#define UART_REG_LCR 0x0c
- #define UART_REG_LSR 0x14
- #define UART_REG_LSR_RT2880 0x1c
-
- static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
- static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
-+static int init_complete;
-
- static inline void uart_w32(u32 val, unsigned reg)
- {
-@@ -47,8 +49,31 @@ static inline int soc_is_mt7628(void)
- (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
- }
-
-+static inline void find_uart_base(void)
-+{
-+ int i;
-+
-+ if (!soc_is_mt7628())
-+ return;
-+
-+ for (i = 0; i < 3; i++) {
-+ u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
-+
-+ if (!reg)
-+ continue;
-+
-+ uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE + (0x100 * i));
-+ break;
-+ }
-+}
-+
- void prom_putchar(unsigned char ch)
- {
-+ if (!init_complete) {
-+ find_uart_base();
-+ init_complete = 1;
-+ }
-+
- if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
- uart_w32(ch, UART_TX);
- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
diff --git a/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
deleted file mode 100644
index d4c1506cf7..0000000000
--- a/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
+++ /dev/null
@@ -1,857 +0,0 @@
-From fec11d4e8dc5cc79bcd7c8fd55038ac21ac39965 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 05:22:39 +0000
-Subject: [PATCH 04/53] MIPS: ralink: add MT7621 pcie driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-mt7621.c | 813 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 814 insertions(+)
- create mode 100644 arch/mips/pci/pci-mt7621.c
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
- obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
-+obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
- obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
---- /dev/null
-+++ b/arch/mips/pci/pci-mt7621.c
-@@ -0,0 +1,832 @@
-+/**************************************************************************
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * PCI init for Ralink RT2880 solution
-+ *
-+ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw)
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *
-+ **************************************************************************
-+ * May 2007 Bruce Chang
-+ * Initial Release
-+ *
-+ * May 2009 Bruce Chang
-+ * support RT2880/RT3883 PCIe
-+ *
-+ * May 2011 Bruce Chang
-+ * support RT6855/MT7620 PCIe
-+ *
-+ **************************************************************************
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/version.h>
-+#include <asm/pci.h>
-+#include <asm/io.h>
-+#include <asm/mips-cm.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/of.h>
-+#include <linux/of_pci.h>
-+#include <linux/platform_device.h>
-+
-+#include <ralink_regs.h>
-+
-+extern void pcie_phy_init(void);
-+extern void chk_phy_pll(void);
-+
-+/*
-+ * These functions and structures provide the BIOS scan and mapping of the PCI
-+ * devices.
-+ */
-+
-+#define CONFIG_PCIE_PORT0
-+#define CONFIG_PCIE_PORT1
-+#define CONFIG_PCIE_PORT2
-+#define RALINK_PCIE0_CLK_EN (1<<24)
-+#define RALINK_PCIE1_CLK_EN (1<<25)
-+#define RALINK_PCIE2_CLK_EN (1<<26)
-+
-+#define RALINK_PCI_CONFIG_ADDR 0x20
-+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
-+#define SURFBOARDINT_PCIE0 11 /* PCIE0 */
-+#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
-+#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
-+#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
-+#define SURFBOARDINT_PCIE1 31 /* PCIE1 */
-+#define SURFBOARDINT_PCIE2 32 /* PCIE2 */
-+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
-+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
-+#define RALINK_PCIE0_RST (1<<24)
-+#define RALINK_PCIE1_RST (1<<25)
-+#define RALINK_PCIE2_RST (1<<26)
-+#define RALINK_SYSCTL_BASE 0xBE000000
-+
-+#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000)
-+#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C)
-+#define RALINK_PCI_BASE 0xBE140000
-+
-+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-+#define RT6855_PCIE0_OFFSET 0x2000
-+#define RT6855_PCIE1_OFFSET 0x3000
-+#define RT6855_PCIE2_OFFSET 0x4000
-+
-+#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010)
-+#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018)
-+#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030)
-+#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034)
-+#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038)
-+#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050)
-+#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060)
-+#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064)
-+
-+#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010)
-+#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018)
-+#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030)
-+#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034)
-+#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038)
-+#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050)
-+#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060)
-+#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064)
-+
-+#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010)
-+#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018)
-+#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030)
-+#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034)
-+#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038)
-+#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050)
-+#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060)
-+#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064)
-+
-+#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
-+#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
-+
-+
-+#define MV_WRITE(ofs, data) \
-+ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
-+#define MV_READ(ofs, data) \
-+ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+#define MV_READ_DATA(ofs) \
-+ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_16(ofs, data) \
-+ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
-+#define MV_READ_16(ofs, data) \
-+ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
-+
-+#define MV_WRITE_8(ofs, data) \
-+ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
-+#define MV_READ_8(ofs, data) \
-+ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
-+
-+
-+
-+#define RALINK_PCI_MM_MAP_BASE 0x60000000
-+#define RALINK_PCI_IO_MAP_BASE 0x1e160000
-+
-+#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000
-+#define GPIO_PERST
-+#define ASSERT_SYSRST_PCIE(val) do { \
-+ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
-+ RALINK_RSTCTRL |= val; \
-+ else \
-+ RALINK_RSTCTRL &= ~val; \
-+ } while(0)
-+#define DEASSERT_SYSRST_PCIE(val) do { \
-+ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
-+ RALINK_RSTCTRL &= ~val; \
-+ else \
-+ RALINK_RSTCTRL |= val; \
-+ } while(0)
-+#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
-+#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
-+#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
-+#define RALINK_GPIOMODE *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60)
-+#define RALINK_PCIE_CLK_GEN *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c)
-+#define RALINK_PCIE_CLK_GEN1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80)
-+#define PPLL_CFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c)
-+#define PPLL_DRV *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0)
-+//RALINK_SYSCFG1 bit
-+#define RALINK_PCI_HOST_MODE_EN (1<<7)
-+#define RALINK_PCIE_RC_MODE_EN (1<<8)
-+//RALINK_RSTCTRL bit
-+#define RALINK_PCIE_RST (1<<23)
-+#define RALINK_PCI_RST (1<<24)
-+//RALINK_CLKCFG1 bit
-+#define RALINK_PCI_CLK_EN (1<<19)
-+#define RALINK_PCIE_CLK_EN (1<<21)
-+//RALINK_GPIOMODE bit
-+#define PCI_SLOTx2 (1<<11)
-+#define PCI_SLOTx1 (2<<11)
-+//MTK PCIE PLL bit
-+#define PDRV_SW_SET (1<<31)
-+#define LC_CKDRVPD_ (1<<19)
-+
-+#define MEMORY_BASE 0x0
-+static int pcie_link_status = 0;
-+
-+#define PCI_ACCESS_READ_1 0
-+#define PCI_ACCESS_READ_2 1
-+#define PCI_ACCESS_READ_4 2
-+#define PCI_ACCESS_WRITE_1 3
-+#define PCI_ACCESS_WRITE_2 4
-+#define PCI_ACCESS_WRITE_4 5
-+
-+static int config_access(unsigned char access_type, struct pci_bus *bus,
-+ unsigned int devfn, unsigned int where, u32 * data)
-+{
-+ unsigned int slot = PCI_SLOT(devfn);
-+ u8 func = PCI_FUNC(devfn);
-+ uint32_t address_reg, data_reg;
-+ unsigned int address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+
-+ address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
-+ MV_WRITE(address_reg, address);
-+
-+ switch(access_type) {
-+ case PCI_ACCESS_WRITE_1:
-+ MV_WRITE_8(data_reg+(where&0x3), *data);
-+ break;
-+ case PCI_ACCESS_WRITE_2:
-+ MV_WRITE_16(data_reg+(where&0x3), *data);
-+ break;
-+ case PCI_ACCESS_WRITE_4:
-+ MV_WRITE(data_reg, *data);
-+ break;
-+ case PCI_ACCESS_READ_1:
-+ MV_READ_8( data_reg+(where&0x3), data);
-+ break;
-+ case PCI_ACCESS_READ_2:
-+ MV_READ_16(data_reg+(where&0x3), data);
-+ break;
-+ case PCI_ACCESS_READ_4:
-+ MV_READ(data_reg, data);
-+ break;
-+ default:
-+ printk("no specify access type\n");
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static int
-+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
-+{
-+ return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val);
-+}
-+
-+static int
-+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int
-+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
-+{
-+ if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val))
-+ return -1;
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+
-+static int
-+pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
-+{
-+ switch (size) {
-+ case 1:
-+ return read_config_byte(bus, devfn, where, (u8 *) val);
-+ case 2:
-+ return read_config_word(bus, devfn, where, (u16 *) val);
-+ default:
-+ return read_config_dword(bus, devfn, where, val);
-+ }
-+}
-+
-+static int
-+pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-+{
-+ switch (size) {
-+ case 1:
-+ return write_config_byte(bus, devfn, where, (u8) val);
-+ case 2:
-+ return write_config_word(bus, devfn, where, (u16) val);
-+ default:
-+ return write_config_dword(bus, devfn, where, val);
-+ }
-+}
-+
-+struct pci_ops mt7621_pci_ops= {
-+ .read = pci_config_read,
-+ .write = pci_config_write,
-+};
-+
-+static struct resource mt7621_res_pci_mem1 = {
-+ .name = "PCI MEM1",
-+ .start = RALINK_PCI_MM_MAP_BASE,
-+ .end = (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)),
-+ .flags = IORESOURCE_MEM,
-+};
-+static struct resource mt7621_res_pci_io1 = {
-+ .name = "PCI I/O1",
-+ .start = RALINK_PCI_IO_MAP_BASE,
-+ .end = (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)),
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct pci_controller mt7621_controller = {
-+ .pci_ops = &mt7621_pci_ops,
-+ .mem_resource = &mt7621_res_pci_mem1,
-+ .io_resource = &mt7621_res_pci_io1,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+ .io_map_base = 0xa0000000,
-+};
-+
-+static void
-+read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val)
-+{
-+ unsigned int address_reg, data_reg, address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
-+ MV_WRITE(address_reg, address);
-+ MV_READ(data_reg, val);
-+ return;
-+}
-+
-+static void
-+write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val)
-+{
-+ unsigned int address_reg, data_reg, address;
-+
-+ address_reg = RALINK_PCI_CONFIG_ADDR;
-+ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG;
-+ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ;
-+ MV_WRITE(address_reg, address);
-+ MV_WRITE(data_reg, val);
-+ return;
-+}
-+
-+
-+int __init
-+pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ u16 cmd;
-+ u32 val;
-+ int irq = 0;
-+
-+ if ((dev->bus->number == 0) && (slot == 0)) {
-+ write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 0 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if((dev->bus->number == 0) && (slot == 0x1)) {
-+ write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 1 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if((dev->bus->number == 0) && (slot == 0x2)) {
-+ write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
-+ read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
-+ printk("BAR0 at slot 2 = %x\n", val);
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
-+ switch (pcie_link_status) {
-+ case 2:
-+ case 6:
-+ irq = RALINK_INT_PCIE1;
-+ break;
-+ case 4:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE0;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number == 2) && (slot == 0x0)) {
-+ switch (pcie_link_status) {
-+ case 5:
-+ case 6:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE1;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number == 2) && (slot == 0x1)) {
-+ switch (pcie_link_status) {
-+ case 5:
-+ case 6:
-+ irq = RALINK_INT_PCIE2;
-+ break;
-+ default:
-+ irq = RALINK_INT_PCIE1;
-+ }
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x0)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x1)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else if ((dev->bus->number ==3) && (slot == 0x2)) {
-+ irq = RALINK_INT_PCIE2;
-+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
-+ } else {
-+ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
-+ return 0;
-+ }
-+
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-+ return irq;
-+}
-+
-+void
-+set_pcie_phy(u32 *addr, int start_b, int bits, int val)
-+{
-+// printk("0x%p:", addr);
-+// printk(" %x", *addr);
-+ *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
-+ *(unsigned int *)(addr) |= val << start_b;
-+// printk(" -> %x\n", *addr);
-+}
-+
-+void
-+bypass_pipe_rst(void)
-+{
-+#if defined (CONFIG_PCIE_PORT0)
-+ /* PCIe Port 0 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ /* PCIe Port 1 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ /* PCIe Port 2 */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4]
-+#endif
-+}
-+
-+void
-+set_phy_for_ssc(void)
-+{
-+ unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10));
-+
-+ reg = (reg >> 6) & 0x7;
-+#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1)
-+ /* Set PCIe Port0 & Port1 PHY to disable SSC */
-+ /* Debug Xtal Type */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ printk("***** Xtal 40MHz *****\n");
-+ } else { // 25MHz | 20MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ if (reg >= 6) {
-+ printk("***** Xtal 25MHz *****\n");
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
-+ } else {
-+ printk("***** Xtal 20MHz *****\n");
-+ }
-+ }
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
-+ }
-+ /* Enable PHY and disable force mode */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ /* Set PCIe Port2 PHY to disable SSC */
-+ /* Debug Xtal Type */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ } else { // 25MHz | 20MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
-+ if (reg >= 6) { // 25MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
-+ }
-+ }
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
-+ if(reg <= 5 && reg >= 3) { // 40MHz Xtal
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
-+ }
-+ /* Enable PHY and disable force mode */
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable
-+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control
-+#endif
-+}
-+
-+void setup_cm_memory_region(struct resource *mem_resource)
-+{
-+ resource_size_t mask;
-+ if (mips_cm_numiocu()) {
-+ /* FIXME: hardware doesn't accept mask values with 1s after
-+ 0s (e.g. 0xffef), so it would be great to warn if that's
-+ about to happen */
-+ mask = ~(mem_resource->end - mem_resource->start);
-+
-+ write_gcr_reg1_base(mem_resource->start);
-+ write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
-+ printk("PCI coherence region base: 0x%08lx, mask/settings: 0x%08lx\n",
-+ read_gcr_reg1_base(),
-+ read_gcr_reg1_mask());
-+ }
-+}
-+
-+static int mt7621_pci_probe(struct platform_device *pdev)
-+{
-+ unsigned long val = 0;
-+
-+ iomem_resource.start = 0;
-+ iomem_resource.end= ~0;
-+ ioport_resource.start= 0;
-+ ioport_resource.end = ~0;
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ val = RALINK_PCIE0_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ val |= RALINK_PCIE1_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ val |= RALINK_PCIE2_RST;
-+#endif
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
-+ printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
-+ *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
-+ *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
-+ mdelay(100);
-+ *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
-+ mdelay(100);
-+ *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA
-+
-+ mdelay(100);
-+#else
-+ *(unsigned int *)(0xbe000060) &= ~0x00000c00;
-+#endif
-+#if defined (CONFIG_PCIE_PORT0)
-+ val = RALINK_PCIE0_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ val |= RALINK_PCIE1_RST;
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ val |= RALINK_PCIE2_RST;
-+#endif
-+ DEASSERT_SYSRST_PCIE(val);
-+ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+
-+ if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
-+ bypass_pipe_rst();
-+ set_phy_for_ssc();
-+ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ read_config(0, 0, 0, 0x70c, &val);
-+ printk("Port 0 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ read_config(0, 1, 0, 0x70c, &val);
-+ printk("Port 1 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ read_config(0, 2, 0, 0x70c, &val);
-+ printk("Port 2 N_FTS = %x\n", (unsigned int)val);
-+#endif
-+
-+ RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST);
-+ RALINK_SYSCFG1 &= ~(0x30);
-+ RALINK_SYSCFG1 |= (2<<4);
-+ RALINK_PCIE_CLK_GEN &= 0x7fffffff;
-+ RALINK_PCIE_CLK_GEN1 &= 0x80ffffff;
-+ RALINK_PCIE_CLK_GEN1 |= 0xa << 24;
-+ RALINK_PCIE_CLK_GEN |= 0x80000000;
-+ mdelay(50);
-+ RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST);
-+
-+
-+#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/
-+ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA
-+ mdelay(100);
-+#else
-+ RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST
-+#endif
-+ mdelay(500);
-+
-+
-+ mdelay(500);
-+#if defined (CONFIG_PCIE_PORT0)
-+ if(( RALINK_PCI0_STATUS & 0x1) == 0)
-+ {
-+ printk("PCIE0 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN);
-+ pcie_link_status &= ~(1<<0);
-+ } else {
-+ pcie_link_status |= 1<<0;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ if(( RALINK_PCI1_STATUS & 0x1) == 0)
-+ {
-+ printk("PCIE1 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN);
-+ pcie_link_status &= ~(1<<1);
-+ } else {
-+ pcie_link_status |= 1<<1;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ if (( RALINK_PCI2_STATUS & 0x1) == 0) {
-+ printk("PCIE2 no card, disable it(RST&CLK)\n");
-+ ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
-+ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN);
-+ pcie_link_status &= ~(1<<2);
-+ } else {
-+ pcie_link_status |= 1<<2;
-+ RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
-+ }
-+#endif
-+ if (pcie_link_status == 0)
-+ return 0;
-+
-+/*
-+pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
-+3'b000 x x x
-+3'b001 x x 0
-+3'b010 x 0 x
-+3'b011 x 1 0
-+3'b100 0 x x
-+3'b101 1 x 0
-+3'b110 1 0 x
-+3'b111 2 1 0
-+*/
-+ switch(pcie_link_status) {
-+ case 2:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
-+ break;
-+ case 4:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2
-+ break;
-+ case 5:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
-+ break;
-+ case 6:
-+ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000;
-+ RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0
-+ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1
-+ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2
-+ break;
-+ }
-+ printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
-+ //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
-+
-+/*
-+ ioport_resource.start = mt7621_res_pci_io1.start;
-+ ioport_resource.end = mt7621_res_pci_io1.end;
-+*/
-+
-+ RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
-+ RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
-+
-+#if defined (CONFIG_PCIE_PORT0)
-+ //PCIe0
-+ if((pcie_link_status & 0x1) != 0) {
-+ RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI0_CLASS = 0x06040001;
-+ printk("PCIE0 enabled\n");
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT1)
-+ //PCIe1
-+ if ((pcie_link_status & 0x2) != 0) {
-+ RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI1_CLASS = 0x06040001;
-+ printk("PCIE1 enabled\n");
-+ }
-+#endif
-+#if defined (CONFIG_PCIE_PORT2)
-+ //PCIe2
-+ if ((pcie_link_status & 0x4) != 0) {
-+ RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
-+ RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE;
-+ RALINK_PCI2_CLASS = 0x06040001;
-+ printk("PCIE2 enabled\n");
-+ }
-+#endif
-+
-+
-+ switch(pcie_link_status) {
-+ case 7:
-+ read_config(0, 2, 0, 0x4, &val);
-+ write_config(0, 2, 0, 0x4, val|0x4);
-+ // write_config(0, 1, 0, 0x4, val|0x7);
-+ read_config(0, 2, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 2, 0, 0x70c, val);
-+ case 3:
-+ case 5:
-+ case 6:
-+ read_config(0, 1, 0, 0x4, &val);
-+ write_config(0, 1, 0, 0x4, val|0x4);
-+ // write_config(0, 1, 0, 0x4, val|0x7);
-+ read_config(0, 1, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 1, 0, 0x70c, val);
-+ default:
-+ read_config(0, 0, 0, 0x4, &val);
-+ write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
-+ // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
-+ read_config(0, 0, 0, 0x70c, &val);
-+ val &= ~(0xff)<<8;
-+ val |= 0x50<<8;
-+ write_config(0, 0, 0, 0x70c, val);
-+ }
-+
-+ pci_load_of_ranges(&mt7621_controller, pdev->dev.of_node);
-+ setup_cm_memory_region(mt7621_controller.mem_resource);
-+ register_pci_controller(&mt7621_controller);
-+ return 0;
-+
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7621_pci_ids[] = {
-+ { .compatible = "mediatek,mt7621-pci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
-+
-+static struct platform_driver mt7621_pci_driver = {
-+ .probe = mt7621_pci_probe,
-+ .driver = {
-+ .name = "mt7621-pci",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(mt7621_pci_ids),
-+ },
-+};
-+
-+static int __init mt7621_pci_init(void)
-+{
-+ return platform_driver_register(&mt7621_pci_driver);
-+}
-+
-+arch_initcall(mt7621_pci_init);
diff --git a/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
deleted file mode 100644
index 248357a8a9..0000000000
--- a/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:08:11 +0200
-Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k
- irq
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -1,11 +1,16 @@
- if RALINK
-
-+config CEVT_SYSTICK_QUIRK
-+ bool
-+ default n
-+
- config CLKEVT_RT3352
- bool
- depends on SOC_RT305X || SOC_MT7620
- default y
- select CLKSRC_OF
- select CLKSRC_MMIO
-+ select CEVT_SYSTICK_QUIRK
-
- config RALINK_ILL_ACC
- bool
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -15,6 +15,26 @@
- #include <asm/time.h>
- #include <asm/cevt-r4k.h>
-
-+static int mips_state_oneshot(struct clock_event_device *evt)
-+{
-+ if (!cp0_timer_irq_installed) {
-+ cp0_timer_irq_installed = 1;
-+ setup_irq(evt->irq, &c0_compare_irqaction);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mips_state_shutdown(struct clock_event_device *evt)
-+{
-+ if (cp0_timer_irq_installed) {
-+ cp0_timer_irq_installed = 0;
-+ remove_irq(evt->irq, &c0_compare_irqaction);
-+ }
-+
-+ return 0;
-+}
-+
- static int mips_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -208,18 +228,21 @@ int r4k_clockevent_init(void)
- cd->rating = 300;
- cd->irq = irq;
- cd->cpumask = cpumask_of(cpu);
-+ cd->set_state_shutdown = mips_state_shutdown;
-+ cd->set_state_oneshot = mips_state_oneshot;
- cd->set_next_event = mips_next_event;
- cd->event_handler = mips_event_handler;
-
- clockevents_register_device(cd);
-
-+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
- if (cp0_timer_irq_installed)
- return 0;
-
- cp0_timer_irq_installed = 1;
-
- setup_irq(irq, &c0_compare_irqaction);
--
-+#endif
- return 0;
- }
-
diff --git a/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch
deleted file mode 100644
index f953aee9ff..0000000000
--- a/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 16:26:41 +0200
-Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling
-
-This feature will break udelay() and cause the delay loop to have longer delays
-when the frequency is scaled causing a performance hit.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/arch/mips/ralink/cevt-rt3352.c
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -29,6 +29,10 @@
- /* enable the counter */
- #define CFG_CNT_EN 0x1
-
-+/* mt7620 frequency scaling defines */
-+#define CLK_LUT_CFG 0x40
-+#define SLEEP_EN BIT(31)
-+
- struct systick_device {
- void __iomem *membase;
- struct clock_event_device dev;
-@@ -36,9 +40,26 @@ struct systick_device {
- int freq_scale;
- };
-
-+static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
-+
- static int systick_set_oneshot(struct clock_event_device *evt);
- static int systick_shutdown(struct clock_event_device *evt);
-
-+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
-+{
-+ if (sdev->freq_scale == status)
-+ return;
-+
-+ sdev->freq_scale = status;
-+
-+ pr_info("%s: %s autosleep mode\n", systick.dev.name,
-+ (status) ? ("enable") : ("disable"));
-+ if (status)
-+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
-+ else
-+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
-+}
-+
- static int systick_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -99,6 +120,9 @@ static int systick_shutdown(struct clock
- sdev->irq_requested = 0;
- iowrite32(0, systick.membase + SYSTICK_CONFIG);
-
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 0);
-+
- return 0;
- }
-
-@@ -114,15 +138,29 @@ static int systick_set_oneshot(struct cl
- iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
- systick.membase + SYSTICK_CONFIG);
-
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 1);
-+
- return 0;
- }
-
-+static const struct of_device_id systick_match[] = {
-+ { .compatible = "ralink,mt7620-systick", .data = mt7620_freq_scaling},
-+ {},
-+};
-+
- static void __init ralink_systick_init(struct device_node *np)
- {
-+ const struct of_device_id *match;
-+
- systick.membase = of_iomap(np, 0);
- if (!systick.membase)
- return;
-
-+ match = of_match_node(systick_match, np);
-+ if (match)
-+ systick_freq_scaling = match->data;
-+
- systick_irqaction.name = np->name;
- systick.dev.name = np->name;
- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
diff --git a/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
deleted file mode 100644
index 3a05a30a86..0000000000
--- a/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 18:46:02 +0200
-Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -76,6 +76,8 @@ void __init plat_mem_setup(void)
-
- strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
-+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-+
- of_scan_flat_dt(early_init_dt_find_memory, NULL);
- if (memory_dtb)
- of_scan_flat_dt(early_init_dt_scan_memory, NULL);
diff --git a/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch b/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
deleted file mode 100644
index 7788926dd8..0000000000
--- a/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 0fd52df8bce3be9edbc195b120bc9a68f970d9e5 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 20:43:25 +0200
-Subject: [PATCH 08/53] MIPS: ralink: mt7620: fix usb issue during frequency
- scaling
-
- If the USB HCD is running and the cpu is scaled too low, then the USB stops
- working. Increase the idle speed of the core to fix this if the kernel is
- built with USB support.
-
- The values are taken from the Ralink SDK Kernel.
-
- Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -40,6 +40,12 @@
- /* is this a MT7620 or a MT7628 */
- enum mt762x_soc_type mt762x_soc;
-
-+/* clock scaling */
-+#define CLKCFG_FDIV_MASK 0x1f00
-+#define CLKCFG_FDIV_USB_VAL 0x0300
-+#define CLKCFG_FFRAC_MASK 0x001f
-+#define CLKCFG_FFRAC_USB_VAL 0x0003
-+
- /* does the board have sdram or ddram */
- static int dram_type;
-
-@@ -423,6 +429,19 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000c00.uartlite", periph_rate);
- ralink_clk_add("10180000.wmac", xtal_rate);
-+
-+ if (IS_ENABLED(CONFIG_USB)) {
-+ /*
-+ * When the CPU goes into sleep mode, the BUS clock will be too low for
-+ * USB to function properly
-+ */
-+ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
-+
-+ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
-+ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
-+
-+ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
-+ }
- }
-
- void __init ralink_of_remap(void)
diff --git a/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch
deleted file mode 100644
index 2164d357f0..0000000000
--- a/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch
+++ /dev/null
@@ -1,443 +0,0 @@
-From 41aa7fc236fdb1f4c9b8b10df9b71f0d248cb36b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:11:12 +0100
-Subject: [PATCH 09/53] PCI: MIPS: adds mt7620a pcie driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-mt7620.c | 396 ++++++++++++++++++++++++++++
- arch/mips/ralink/Kconfig | 1 +
- 4 files changed, 399 insertions(+)
- create mode 100644 arch/mips/pci/pci-mt7620.c
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -19,6 +19,7 @@ enum mt762x_soc_type {
- MT762X_SOC_MT7620N,
- MT762X_SOC_MT7628AN,
- };
-+extern enum mt762x_soc_type mt762x_soc;
-
- #define MT7620_SYSC_BASE 0x10000000
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
- obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
-+obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
- obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
- obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
---- /dev/null
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -0,0 +1,396 @@
-+/*
-+ * Ralink MT7620A SoC PCI support
-+ *
-+ * Copyright (C) 2007-2013 Bruce Chang
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+#include <linux/reset.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/mt7620.h>
-+
-+#define RALINK_PCI_MM_MAP_BASE 0x20000000
-+#define RALINK_PCI_IO_MAP_BASE 0x10160000
-+
-+#define RALINK_INT_PCIE0 4
-+#define RALINK_SYSCFG1 0x14
-+#define RALINK_CLKCFG1 0x30
-+#define RALINK_GPIOMODE 0x60
-+#define RALINK_PCIE_CLK_GEN 0x7c
-+#define RALINK_PCIE_CLK_GEN1 0x80
-+#define PCIEPHY0_CFG 0x90
-+#define PPLL_CFG1 0x9c
-+#define PPLL_DRV 0xa0
-+#define PDRV_SW_SET (1<<31)
-+#define LC_CKDRVPD_ (1<<19)
-+
-+#define RALINK_PCI_CONFIG_ADDR 0x20
-+#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24
-+#define MEMORY_BASE 0x0
-+#define RALINK_PCIE0_RST (1<<26)
-+#define RALINK_PCI_BASE 0xB0140000
-+#define RALINK_PCI_MEMBASE 0x28
-+#define RALINK_PCI_IOBASE 0x2C
-+
-+#define RT6855_PCIE0_OFFSET 0x2000
-+
-+#define RALINK_PCI_PCICFG_ADDR 0x00
-+#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
-+#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
-+#define RALINK_PCI0_ID 0x30
-+#define RALINK_PCI0_CLASS 0x34
-+#define RALINK_PCI0_SUBID 0x38
-+#define RALINK_PCI0_STATUS 0x50
-+#define RALINK_PCI_PCIMSK_ADDR 0x0C
-+
-+#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
-+#define RALINK_PCIE0_CLK_EN (1 << 26)
-+
-+#define BUSY 0x80000000
-+#define WAITRETRY_MAX 10
-+#define WRITE_MODE (1UL << 23)
-+#define DATA_SHIFT 0
-+#define ADDR_SHIFT 8
-+
-+static void __iomem *bridge_base;
-+static void __iomem *pcie_base;
-+
-+static struct reset_control *rstpcie0;
-+
-+static inline void bridge_w32(u32 val, unsigned reg)
-+{
-+ iowrite32(val, bridge_base + reg);
-+}
-+
-+static inline u32 bridge_r32(unsigned reg)
-+{
-+ return ioread32(bridge_base + reg);
-+}
-+
-+static inline void pcie_w32(u32 val, unsigned reg)
-+{
-+ iowrite32(val, pcie_base + reg);
-+}
-+
-+static inline u32 pcie_r32(unsigned reg)
-+{
-+ return ioread32(pcie_base + reg);
-+}
-+
-+static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
-+{
-+ u32 val = pcie_r32(reg);
-+
-+ val &= ~clr;
-+ val |= set;
-+ pcie_w32(val, reg);
-+}
-+
-+static int wait_pciephy_busy(void)
-+{
-+ unsigned long reg_value = 0x0, retry = 0;
-+
-+ while (1) {
-+ reg_value = pcie_r32(PCIEPHY0_CFG);
-+
-+ if (reg_value & BUSY)
-+ mdelay(100);
-+ else
-+ break;
-+ if (retry++ > WAITRETRY_MAX){
-+ printk("PCIE-PHY retry failed.\n");
-+ return -1;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static void pcie_phy(unsigned long addr, unsigned long val)
-+{
-+ wait_pciephy_busy();
-+ pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
-+ mdelay(1);
-+ wait_pciephy_busy();
-+}
-+
-+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
-+{
-+ unsigned int slot = PCI_SLOT(devfn);
-+ u8 func = PCI_FUNC(devfn);
-+ u32 address;
-+ u32 data;
-+ u32 num = 0;
-+
-+ if (bus)
-+ num = bus->number;
-+
-+ address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
-+ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
-+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
-+
-+ switch (size) {
-+ case 1:
-+ *val = (data >> ((where & 3) << 3)) & 0xff;
-+ break;
-+ case 2:
-+ *val = (data >> ((where & 3) << 3)) & 0xffff;
-+ break;
-+ case 4:
-+ *val = data;
-+ break;
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-+{
-+ unsigned int slot = PCI_SLOT(devfn);
-+ u8 func = PCI_FUNC(devfn);
-+ u32 address;
-+ u32 data;
-+ u32 num = 0;
-+
-+ if (bus)
-+ num = bus->number;
-+
-+ address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
-+ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
-+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
-+
-+ switch (size) {
-+ case 1:
-+ data = (data & ~(0xff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 2:
-+ data = (data & ~(0xffff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 4:
-+ data = val;
-+ break;
-+ }
-+
-+ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+struct pci_ops mt7620_pci_ops= {
-+ .read = pci_config_read,
-+ .write = pci_config_write,
-+};
-+
-+static struct resource mt7620_res_pci_mem1;
-+static struct resource mt7620_res_pci_io1;
-+struct pci_controller mt7620_controller = {
-+ .pci_ops = &mt7620_pci_ops,
-+ .mem_resource = &mt7620_res_pci_mem1,
-+ .mem_offset = 0x00000000UL,
-+ .io_resource = &mt7620_res_pci_io1,
-+ .io_offset = 0x00000000UL,
-+ .io_map_base = 0xa0000000,
-+};
-+
-+static int mt7620_pci_hw_init(struct platform_device *pdev) {
-+ /* PCIE: bypass PCIe DLL */
-+ pcie_phy(0x0, 0x80);
-+ pcie_phy(0x1, 0x04);
-+
-+ /* PCIE: Elastic buffer control */
-+ pcie_phy(0x68, 0xB4);
-+
-+ pcie_m32(0, BIT(1), RALINK_PCI_PCICFG_ADDR);
-+
-+ reset_control_assert(rstpcie0);
-+
-+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
-+ rt_sysc_m32(BIT(19), BIT(31), PPLL_DRV);
-+
-+ reset_control_deassert(rstpcie0);
-+ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
-+
-+ mdelay(100);
-+
-+ if (!(rt_sysc_r32(PPLL_CFG1) & BIT(23))) {
-+ dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
-+ reset_control_assert(rstpcie0);
-+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
-+ return -1;
-+ }
-+ rt_sysc_m32(BIT(18) | BIT(17), BIT(19) | BIT(31), PPLL_DRV);
-+
-+ return 0;
-+}
-+
-+static int mt7628_pci_hw_init(struct platform_device *pdev) {
-+ u32 val = 0;
-+
-+ rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
-+ reset_control_deassert(rstpcie0);
-+ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
-+ mdelay(100);
-+
-+ pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
-+
-+ pci_config_read(NULL, 0, 0x70c, 4, &val);
-+ val &= ~(0xff) << 8;
-+ val |= 0x50 << 8;
-+ pci_config_write(NULL, 0, 0x70c, 4, val);
-+
-+ pci_config_read(NULL, 0, 0x70c, 4, &val);
-+ dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
-+
-+ return 0;
-+}
-+
-+static int mt7620_pci_probe(struct platform_device *pdev)
-+{
-+ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ u32 val = 0;
-+
-+ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
-+ if (IS_ERR(rstpcie0))
-+ return PTR_ERR(rstpcie0);
-+
-+ bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
-+ if (!bridge_base)
-+ return -ENOMEM;
-+
-+ pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
-+ if (!pcie_base)
-+ return -ENOMEM;
-+
-+ iomem_resource.start = 0;
-+ iomem_resource.end = ~0;
-+ ioport_resource.start = 0;
-+ ioport_resource.end = ~0;
-+
-+ /* bring up the pci core */
-+ switch (ralink_soc) {
-+ case MT762X_SOC_MT7620A:
-+ if (mt7620_pci_hw_init(pdev))
-+ return -1;
-+ break;
-+
-+ case MT762X_SOC_MT7628AN:
-+ if (mt7628_pci_hw_init(pdev))
-+ return -1;
-+ break;
-+
-+ default:
-+ dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
-+ return -1;
-+ }
-+ mdelay(50);
-+
-+ /* enable write access */
-+ pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
-+ mdelay(100);
-+
-+ /* check if there is a card present */
-+ if ((pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
-+ reset_control_assert(rstpcie0);
-+ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
-+ if (ralink_soc == MT762X_SOC_MT7620A)
-+ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
-+ dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
-+ return -1;
-+ }
-+
-+ /* setup ranges */
-+ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
-+ bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
-+
-+ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
-+ pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
-+ pcie_w32(0x06040001, RALINK_PCI0_CLASS);
-+
-+ /* enable interrupts */
-+ pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
-+
-+ /* voodoo from the SDK driver */
-+ pci_config_read(NULL, 0, 4, 4, &val);
-+ pci_config_write(NULL, 0, 4, 4, val | 0x7);
-+
-+ pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
-+ register_pci_controller(&mt7620_controller);
-+
-+ return 0;
-+}
-+
-+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ u16 cmd;
-+ u32 val;
-+ int irq = 0;
-+
-+ if ((dev->bus->number == 0) && (slot == 0)) {
-+ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
-+ pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
-+ pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
-+ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
-+ irq = RALINK_INT_PCIE0;
-+ } else {
-+ dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
-+ return 0;
-+ }
-+ dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", dev->bus->number, slot, irq);
-+
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+
-+ // FIXME
-+ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-+ //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
-+
-+ return irq;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7620_pci_ids[] = {
-+ { .compatible = "mediatek,mt7620-pci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7620_pci_ids);
-+
-+static struct platform_driver mt7620_pci_driver = {
-+ .probe = mt7620_pci_probe,
-+ .driver = {
-+ .name = "mt7620-pci",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(mt7620_pci_ids),
-+ },
-+};
-+
-+static int __init mt7620_pci_init(void)
-+{
-+ return platform_driver_register(&mt7620_pci_driver);
-+}
-+
-+arch_initcall(mt7620_pci_init);
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -43,6 +43,7 @@ choice
-
- config SOC_MT7620
- bool "MT7620/8"
-+ select HW_HAS_PCI
-
- config SOC_MT7621
- bool "MT7621"
diff --git a/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch b/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch
deleted file mode 100644
index 11dad7a8c0..0000000000
--- a/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 39ce22c870f4503bed5e451acfcab21eba3b6239 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:49:07 +0100
-Subject: [PATCH 10/53] arch: mips: ralink: add spi1 clocks
-
-based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 1 +
- arch/mips/ralink/rt305x.c | 1 +
- arch/mips/ralink/rt3883.c | 1 +
- 3 files changed, 3 insertions(+)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -427,6 +427,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000100.timer", periph_rate);
- ralink_clk_add("10000120.watchdog", periph_rate);
- ralink_clk_add("10000b00.spi", sys_rate);
-+ ralink_clk_add("10000b40.spi", sys_rate);
- ralink_clk_add("10000c00.uartlite", periph_rate);
- ralink_clk_add("10180000.wmac", xtal_rate);
-
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -202,6 +202,7 @@ void __init ralink_clk_init(void)
-
- ralink_clk_add("cpu", cpu_rate);
- ralink_clk_add("10000b00.spi", sys_rate);
-+ ralink_clk_add("10000b40.spi", sys_rate);
- ralink_clk_add("10000100.timer", wdt_rate);
- ralink_clk_add("10000120.watchdog", wdt_rate);
- ralink_clk_add("10000500.uart", uart_rate);
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -109,6 +109,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000120.watchdog", sys_rate);
- ralink_clk_add("10000500.uart", 40000000);
- ralink_clk_add("10000b00.spi", sys_rate);
-+ ralink_clk_add("10000b40.spi", sys_rate);
- ralink_clk_add("10000c00.uartlite", 40000000);
- ralink_clk_add("10100000.ethernet", sys_rate);
- ralink_clk_add("10180000.wmac", 40000000);
diff --git a/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch b/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch
deleted file mode 100644
index 81cf233a1e..0000000000
--- a/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch
+++ /dev/null
@@ -1,164 +0,0 @@
-From 22ee5168a5dfeda748cabd0bbf728d6bdc6b925b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:12:38 +0100
-Subject: [PATCH 11/53] arch: mips: ralink: unify soc detection
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 8 --------
- arch/mips/include/asm/mach-ralink/ralink_regs.h | 14 ++++++++++++++
- arch/mips/include/asm/mach-ralink/rt305x.h | 21 ++++++---------------
- arch/mips/ralink/prom.c | 5 ++++-
- arch/mips/ralink/rt305x.c | 12 +++++-------
- 5 files changed, 29 insertions(+), 31 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -13,14 +13,6 @@
- #ifndef _MT7620_REGS_H_
- #define _MT7620_REGS_H_
-
--enum mt762x_soc_type {
-- MT762X_SOC_UNKNOWN = 0,
-- MT762X_SOC_MT7620A,
-- MT762X_SOC_MT7620N,
-- MT762X_SOC_MT7628AN,
--};
--extern enum mt762x_soc_type mt762x_soc;
--
- #define MT7620_SYSC_BASE 0x10000000
-
- #define SYSC_REG_CHIP_NAME0 0x00
---- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
-+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-@@ -13,6 +13,20 @@
- #ifndef _RALINK_REGS_H_
- #define _RALINK_REGS_H_
-
-+enum ralink_soc_type {
-+ RALINK_UNKNOWN = 0,
-+ RT305X_SOC_RT3050,
-+ RT305X_SOC_RT3052,
-+ RT305X_SOC_RT3350,
-+ RT305X_SOC_RT3352,
-+ RT305X_SOC_RT5350,
-+ MT762X_SOC_MT7620A,
-+ MT762X_SOC_MT7620N,
-+ MT762X_SOC_MT7621AT,
-+ MT762X_SOC_MT7628AN,
-+};
-+extern enum ralink_soc_type ralink_soc;
-+
- extern __iomem void *rt_sysc_membase;
- extern __iomem void *rt_memc_membase;
-
---- a/arch/mips/include/asm/mach-ralink/rt305x.h
-+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
-@@ -13,25 +13,16 @@
- #ifndef _RT305X_REGS_H_
- #define _RT305X_REGS_H_
-
--enum rt305x_soc_type {
-- RT305X_SOC_UNKNOWN = 0,
-- RT305X_SOC_RT3050,
-- RT305X_SOC_RT3052,
-- RT305X_SOC_RT3350,
-- RT305X_SOC_RT3352,
-- RT305X_SOC_RT5350,
--};
--
--extern enum rt305x_soc_type rt305x_soc;
-+extern enum ralink_soc_type ralink_soc;
-
- static inline int soc_is_rt3050(void)
- {
-- return rt305x_soc == RT305X_SOC_RT3050;
-+ return ralink_soc == RT305X_SOC_RT3050;
- }
-
- static inline int soc_is_rt3052(void)
- {
-- return rt305x_soc == RT305X_SOC_RT3052;
-+ return ralink_soc == RT305X_SOC_RT3052;
- }
-
- static inline int soc_is_rt305x(void)
-@@ -41,17 +32,17 @@ static inline int soc_is_rt305x(void)
-
- static inline int soc_is_rt3350(void)
- {
-- return rt305x_soc == RT305X_SOC_RT3350;
-+ return ralink_soc == RT305X_SOC_RT3350;
- }
-
- static inline int soc_is_rt3352(void)
- {
-- return rt305x_soc == RT305X_SOC_RT3352;
-+ return ralink_soc == RT305X_SOC_RT3352;
- }
-
- static inline int soc_is_rt5350(void)
- {
-- return rt305x_soc == RT305X_SOC_RT5350;
-+ return ralink_soc == RT305X_SOC_RT5350;
- }
-
- #define RT305X_SYSC_BASE 0x10000000
---- a/arch/mips/ralink/prom.c
-+++ b/arch/mips/ralink/prom.c
-@@ -15,10 +15,13 @@
- #include <asm/bootinfo.h>
- #include <asm/addrspace.h>
-
-+#include <asm/mach-ralink/ralink_regs.h>
-+
- #include "common.h"
-
- struct ralink_soc_info soc_info;
--struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
-+enum ralink_soc_type ralink_soc;
-+EXPORT_SYMBOL_GPL(ralink_soc);
-
- const char *get_system_type(void)
- {
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -21,8 +21,6 @@
-
- #include "common.h"
-
--enum rt305x_soc_type rt305x_soc;
--
- static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
- static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
- static struct rt2880_pmx_func uartf_func[] = {
-@@ -236,24 +234,24 @@ void prom_soc_init(struct ralink_soc_inf
-
- icache_sets = (read_c0_config1() >> 22) & 7;
- if (icache_sets == 1) {
-- rt305x_soc = RT305X_SOC_RT3050;
-+ ralink_soc = RT305X_SOC_RT3050;
- name = "RT3050";
- soc_info->compatible = "ralink,rt3050-soc";
- } else {
-- rt305x_soc = RT305X_SOC_RT3052;
-+ ralink_soc = RT305X_SOC_RT3052;
- name = "RT3052";
- soc_info->compatible = "ralink,rt3052-soc";
- }
- } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
-- rt305x_soc = RT305X_SOC_RT3350;
-+ ralink_soc = RT305X_SOC_RT3350;
- name = "RT3350";
- soc_info->compatible = "ralink,rt3350-soc";
- } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
-- rt305x_soc = RT305X_SOC_RT3352;
-+ ralink_soc = RT305X_SOC_RT3352;
- name = "RT3352";
- soc_info->compatible = "ralink,rt3352-soc";
- } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
-- rt305x_soc = RT305X_SOC_RT5350;
-+ ralink_soc = RT305X_SOC_RT5350;
- name = "RT5350";
- soc_info->compatible = "ralink,rt5350-soc";
- } else {
diff --git a/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch b/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch
deleted file mode 100644
index 133e4eaea0..0000000000
--- a/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 2a7f11a3a569159e97b7c5134c4d1f3f5b253637 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:14:42 +0100
-Subject: [PATCH 12/53] arch: mips: fix clock jitter
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/cevt-rt3352.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ralink/cevt-rt3352.c
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -69,7 +69,7 @@ static int systick_next_event(unsigned l
- sdev = container_of(evt, struct systick_device, dev);
- count = ioread32(sdev->membase + SYSTICK_COUNT);
- count = (count + delta) % SYSTICK_FREQ;
-- iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
-+ iowrite32(count, sdev->membase + SYSTICK_COMPARE);
-
- return 0;
- }
diff --git a/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch
deleted file mode 100644
index 12abdee344..0000000000
--- a/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:15:32 +0100
-Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/setup.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -681,7 +681,6 @@ static void __init arch_mem_init(char **
- crashk_res.end - crashk_res.start + 1,
- BOOTMEM_DEFAULT);
- #endif
-- device_tree_init();
- sparse_init();
- plat_swiotlb_setup();
- paging_init();
-@@ -791,6 +790,7 @@ void __init setup_arch(char **cmdline_p)
- prefill_possible_map();
-
- cpu_cache_init();
-+ device_tree_init();
- }
-
- unsigned long kernelsp[NR_CPUS];
diff --git a/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch b/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch
deleted file mode 100644
index 50b3dc8318..0000000000
--- a/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch
+++ /dev/null
@@ -1,165 +0,0 @@
-From e6ed424c36458aff8738fb1fbb0141196678058a Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:17:23 +0100
-Subject: [PATCH 14/53] arch: mips: cleanup cevt-rt3352
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/cevt-rt3352.c | 85 ++++++++++++++++++++++++++--------------
- 1 file changed, 56 insertions(+), 29 deletions(-)
-
---- a/arch/mips/ralink/cevt-rt3352.c
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -52,7 +52,7 @@ static inline void mt7620_freq_scaling(s
-
- sdev->freq_scale = status;
-
-- pr_info("%s: %s autosleep mode\n", systick.dev.name,
-+ pr_info("%s: %s autosleep mode\n", sdev->dev.name,
- (status) ? ("enable") : ("disable"));
- if (status)
- rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
-@@ -60,18 +60,33 @@ static inline void mt7620_freq_scaling(s
- rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
- }
-
-+static inline unsigned int read_count(struct systick_device *sdev)
-+{
-+ return ioread32(sdev->membase + SYSTICK_COUNT);
-+}
-+
-+static inline unsigned int read_compare(struct systick_device *sdev)
-+{
-+ return ioread32(sdev->membase + SYSTICK_COMPARE);
-+}
-+
-+static inline void write_compare(struct systick_device *sdev, unsigned int val)
-+{
-+ iowrite32(val, sdev->membase + SYSTICK_COMPARE);
-+}
-+
- static int systick_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
- struct systick_device *sdev;
-- u32 count;
-+ int res;
-
- sdev = container_of(evt, struct systick_device, dev);
-- count = ioread32(sdev->membase + SYSTICK_COUNT);
-- count = (count + delta) % SYSTICK_FREQ;
-- iowrite32(count, sdev->membase + SYSTICK_COMPARE);
-+ delta += read_count(sdev);
-+ write_compare(sdev, delta);
-+ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0;
-
-- return 0;
-+ return res;
- }
-
- static void systick_event_handler(struct clock_event_device *dev)
-@@ -81,20 +96,25 @@ static void systick_event_handler(struct
-
- static irqreturn_t systick_interrupt(int irq, void *dev_id)
- {
-- struct clock_event_device *dev = (struct clock_event_device *) dev_id;
-+ int ret = 0;
-+ struct clock_event_device *cdev;
-+ struct systick_device *sdev;
-
-- dev->event_handler(dev);
-+ if (read_c0_cause() & STATUSF_IP7) {
-+ cdev = (struct clock_event_device *) dev_id;
-+ sdev = container_of(cdev, struct systick_device, dev);
-+
-+ /* Clear Count/Compare Interrupt */
-+ write_compare(sdev, read_compare(sdev));
-+ cdev->event_handler(cdev);
-+ ret = 1;
-+ }
-
-- return IRQ_HANDLED;
-+ return IRQ_RETVAL(ret);
- }
-
- static struct systick_device systick = {
- .dev = {
-- /*
-- * cevt-r4k uses 300, make sure systick
-- * gets used if available
-- */
-- .rating = 310,
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = systick_next_event,
- .set_state_shutdown = systick_shutdown,
-@@ -116,9 +136,9 @@ static int systick_shutdown(struct clock
- sdev = container_of(evt, struct systick_device, dev);
-
- if (sdev->irq_requested)
-- free_irq(systick.dev.irq, &systick_irqaction);
-+ remove_irq(systick.dev.irq, &systick_irqaction);
- sdev->irq_requested = 0;
-- iowrite32(0, systick.membase + SYSTICK_CONFIG);
-+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
-
- if (systick_freq_scaling)
- systick_freq_scaling(sdev, 0);
-@@ -145,38 +165,45 @@ static int systick_set_oneshot(struct cl
- }
-
- static const struct of_device_id systick_match[] = {
-- { .compatible = "ralink,mt7620-systick", .data = mt7620_freq_scaling},
-+ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling},
- {},
- };
-
- static void __init ralink_systick_init(struct device_node *np)
- {
- const struct of_device_id *match;
-+ int rating = 200;
-
- systick.membase = of_iomap(np, 0);
- if (!systick.membase)
- return;
-
- match = of_match_node(systick_match, np);
-- if (match)
-+ if (match) {
- systick_freq_scaling = match->data;
-+ /*
-+ * cevt-r4k uses 300, make sure systick
-+ * gets used if available
-+ */
-+ rating = 310;
-+ }
-
-- systick_irqaction.name = np->name;
-- systick.dev.name = np->name;
-- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
-- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
-- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
-+ /* enable counter than register clock source */
-+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
-+ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-+ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up);
-+
-+ /* register clock event */
- systick.dev.irq = irq_of_parse_and_map(np, 0);
- if (!systick.dev.irq) {
- pr_err("%s: request_irq failed", np->name);
- return;
- }
--
-- clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
-- SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
--
-- clockevents_register_device(&systick.dev);
--
-+ systick_irqaction.name = np->name;
-+ systick.dev.name = np->name;
-+ systick.dev.rating = rating;
-+ systick.dev.cpumask = cpumask_of(0);
-+ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff);
- pr_info("%s: running - mult: %d, shift: %d\n",
- np->name, systick.dev.mult, systick.dev.shift);
- }
diff --git a/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch
deleted file mode 100644
index 6f5a6f4b94..0000000000
--- a/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:18:05 +0100
-Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by
- default
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -13,9 +13,9 @@ config CLKEVT_RT3352
- select CEVT_SYSTICK_QUIRK
-
- config RALINK_ILL_ACC
-- bool
-+ bool "illegal access irq"
- depends on SOC_RT305X
-- default y
-+ default n
-
- config IRQ_INTC
- bool
diff --git a/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch b/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch
deleted file mode 100644
index d25f909f89..0000000000
--- a/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 3c146f6123a73cb6c7d21269b5ada8ccb272a988 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:18:41 +0100
-Subject: [PATCH 16/53] arch: mips: ralink: remove non-PCI check
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -526,9 +526,6 @@ void prom_soc_init(struct ralink_soc_inf
- mt762x_soc = MT762X_SOC_MT7620N;
- name = "MT7620N";
- soc_info->compatible = "ralink,mt7620n-soc";
--#ifdef CONFIG_PCI
-- panic("mt7620n is only supported for non pci kernels");
--#endif
- }
- } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
- mt762x_soc = MT762X_SOC_MT7628AN;
diff --git a/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch b/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch
deleted file mode 100644
index a9122e1b6f..0000000000
--- a/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 145fcd145e0adb10531bb2e8c9f919b0606dff4d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:19:15 +0100
-Subject: [PATCH 17/53] arch: mips: ralink: do not set pm_poweroff
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/reset.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/mips/ralink/reset.c
-+++ b/arch/mips/ralink/reset.c
-@@ -98,7 +98,6 @@ static int __init mips_reboot_setup(void
- {
- _machine_restart = ralink_restart;
- _machine_halt = ralink_halt;
-- pm_power_off = ralink_halt;
-
- return 0;
- }
diff --git a/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch b/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch
deleted file mode 100644
index 8f572c9c1a..0000000000
--- a/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From d3c1e72c755cf67427b5d410039a096520d6537f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:19:55 +0100
-Subject: [PATCH 18/53] arch: mips: ralink: reset pci prior to reboot
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/reset.c | 12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ralink/reset.c
-+++ b/arch/mips/ralink/reset.c
-@@ -11,6 +11,7 @@
- #include <linux/pm.h>
- #include <linux/io.h>
- #include <linux/of.h>
-+#include <linux/delay.h>
- #include <linux/reset-controller.h>
-
- #include <asm/reboot.h>
-@@ -18,8 +19,10 @@
- #include <asm/mach-ralink/ralink_regs.h>
-
- /* Reset Control */
--#define SYSC_REG_RESET_CTRL 0x034
--#define RSTCTL_RESET_SYSTEM BIT(0)
-+#define SYSC_REG_RESET_CTRL 0x034
-+
-+#define RSTCTL_RESET_PCI BIT(26)
-+#define RSTCTL_RESET_SYSTEM BIT(0)
-
- static int ralink_assert_device(struct reset_controller_dev *rcdev,
- unsigned long id)
-@@ -83,6 +86,11 @@ void ralink_rst_init(void)
-
- static void ralink_restart(char *command)
- {
-+ if (IS_ENABLED(CONFIG_PCI)) {
-+ rt_sysc_m32(0, RSTCTL_RESET_PCI, SYSC_REG_RESET_CTRL);
-+ mdelay(50);
-+ }
-+
- local_irq_disable();
- rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
- unreachable();
diff --git a/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch b/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch
deleted file mode 100644
index d2da23a4ca..0000000000
--- a/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 43372c2be9fcf68bc40c322039c75893ce4e982c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:20:47 +0100
-Subject: [PATCH 19/53] arch: mips: ralink: add mt7621 cpu-feature-overrides
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../asm/mach-ralink/mt7621/cpu-feature-overrides.h | 65 ++++++++++++++++++++
- 1 file changed, 65 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
-@@ -0,0 +1,65 @@
-+/*
-+ * Ralink MT7621 specific CPU feature overrides
-+ *
-+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This file was derived from: include/asm-mips/cpu-features.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ * Copyright (C) 2004 Maciej W. Rozycki
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+#ifndef _MT7621_CPU_FEATURE_OVERRIDES_H
-+#define _MT7621_CPU_FEATURE_OVERRIDES_H
-+
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 1
-+#define cpu_has_3k_cache 0
-+#define cpu_has_4k_cache 1
-+#define cpu_has_tx39_cache 0
-+#define cpu_has_sb1_cache 0
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 1
-+#define cpu_has_watch 1
-+#define cpu_has_divec 1
-+
-+#define cpu_has_prefetch 1
-+#define cpu_has_ejtag 1
-+#define cpu_has_llsc 1
-+
-+#define cpu_has_mips16 1
-+#define cpu_has_mdmx 0
-+#define cpu_has_mips3d 0
-+#define cpu_has_smartmips 0
-+
-+#define cpu_has_mips32r1 1
-+#define cpu_has_mips32r2 1
-+#define cpu_has_mips64r1 0
-+#define cpu_has_mips64r2 0
-+
-+#define cpu_has_dsp 1
-+#define cpu_has_dsp2 0
-+#define cpu_has_mipsmt 1
-+
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+#define cpu_dcache_line_size() 32
-+#define cpu_icache_line_size() 32
-+
-+#define cpu_has_dc_aliases 0
-+#define cpu_has_vtag_icache 0
-+
-+#define cpu_has_rixi 0
-+#define cpu_has_tlbinv 0
-+#define cpu_has_userlocal 1
-+
-+#endif /* _MT7621_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch b/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch
deleted file mode 100644
index 713dcfabad..0000000000
--- a/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From 0315355131c46c42164a4b180363bc79728f7015 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:27:15 +0100
-Subject: [PATCH 20/53] arch: mips: ralink: mt7628 fixes
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 76 +++++++++++++++++++++++++++++----------------
- 1 file changed, 50 insertions(+), 26 deletions(-)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -104,28 +104,28 @@ static struct rt2880_pmx_group mt7620a_p
- };
-
- static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-- FUNC("sdcx", 3, 19, 1),
-+ FUNC("sdcx d6", 3, 19, 1),
- FUNC("utif", 2, 19, 1),
- FUNC("gpio", 1, 19, 1),
-- FUNC("pwm", 0, 19, 1),
-+ FUNC("pwm1", 0, 19, 1),
- };
-
- static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
-- FUNC("sdcx", 3, 18, 1),
-+ FUNC("sdcx d7", 3, 18, 1),
- FUNC("utif", 2, 18, 1),
- FUNC("gpio", 1, 18, 1),
-- FUNC("pwm", 0, 18, 1),
-+ FUNC("pwm0", 0, 18, 1),
- };
-
- static struct rt2880_pmx_func uart2_grp_mt7628[] = {
-- FUNC("sdcx", 3, 20, 2),
-+ FUNC("sdcx d5 d4", 3, 20, 2),
- FUNC("pwm", 2, 20, 2),
- FUNC("gpio", 1, 20, 2),
- FUNC("uart", 0, 20, 2),
- };
-
- static struct rt2880_pmx_func uart1_grp_mt7628[] = {
-- FUNC("sdcx", 3, 45, 2),
-+ FUNC("sw_r", 3, 45, 2),
- FUNC("pwm", 2, 45, 2),
- FUNC("gpio", 1, 45, 2),
- FUNC("uart", 0, 45, 2),
-@@ -168,7 +168,7 @@ static struct rt2880_pmx_func spi_cs1_gr
- FUNC("-", 3, 6, 1),
- FUNC("refclk", 2, 6, 1),
- FUNC("gpio", 1, 6, 1),
-- FUNC("spi", 0, 6, 1),
-+ FUNC("spi cs1", 0, 6, 1),
- };
-
- static struct rt2880_pmx_func spis_grp_mt7628[] = {
-@@ -185,28 +185,44 @@ static struct rt2880_pmx_func gpio_grp_m
- FUNC("gpio", 0, 11, 1),
- };
-
--#define MT7628_GPIO_MODE_MASK 0x3
--
--#define MT7628_GPIO_MODE_PWM1 30
--#define MT7628_GPIO_MODE_PWM0 28
--#define MT7628_GPIO_MODE_UART2 26
--#define MT7628_GPIO_MODE_UART1 24
--#define MT7628_GPIO_MODE_I2C 20
--#define MT7628_GPIO_MODE_REFCLK 18
--#define MT7628_GPIO_MODE_PERST 16
--#define MT7628_GPIO_MODE_WDT 14
--#define MT7628_GPIO_MODE_SPI 12
--#define MT7628_GPIO_MODE_SDMODE 10
--#define MT7628_GPIO_MODE_UART0 8
--#define MT7628_GPIO_MODE_I2S 6
--#define MT7628_GPIO_MODE_CS1 4
--#define MT7628_GPIO_MODE_SPIS 2
--#define MT7628_GPIO_MODE_GPIO 0
-+static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
-+ FUNC("rsvd", 3, 35, 1),
-+ FUNC("rsvd", 2, 35, 1),
-+ FUNC("gpio", 1, 35, 1),
-+ FUNC("wled_kn", 0, 35, 1),
-+};
-+
-+static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
-+ FUNC("rsvd", 3, 35, 1),
-+ FUNC("rsvd", 2, 35, 1),
-+ FUNC("gpio", 1, 35, 1),
-+ FUNC("wled_an", 0, 35, 1),
-+};
-+
-+#define MT7628_GPIO_MODE_MASK 0x3
-+
-+#define MT7628_GPIO_MODE_WLED_KN 48
-+#define MT7628_GPIO_MODE_WLED_AN 32
-+#define MT7628_GPIO_MODE_PWM1 30
-+#define MT7628_GPIO_MODE_PWM0 28
-+#define MT7628_GPIO_MODE_UART2 26
-+#define MT7628_GPIO_MODE_UART1 24
-+#define MT7628_GPIO_MODE_I2C 20
-+#define MT7628_GPIO_MODE_REFCLK 18
-+#define MT7628_GPIO_MODE_PERST 16
-+#define MT7628_GPIO_MODE_WDT 14
-+#define MT7628_GPIO_MODE_SPI 12
-+#define MT7628_GPIO_MODE_SDMODE 10
-+#define MT7628_GPIO_MODE_UART0 8
-+#define MT7628_GPIO_MODE_I2S 6
-+#define MT7628_GPIO_MODE_CS1 4
-+#define MT7628_GPIO_MODE_SPIS 2
-+#define MT7628_GPIO_MODE_GPIO 0
-
- static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
- GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_PWM1),
-- GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
-+ GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_PWM0),
- GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_UART2),
-@@ -230,6 +246,10 @@ static struct rt2880_pmx_group mt7628an_
- 1, MT7628_GPIO_MODE_SPIS),
- GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
- 1, MT7628_GPIO_MODE_GPIO),
-+ GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
-+ 1, MT7628_GPIO_MODE_WLED_AN),
-+ GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
-+ 1, MT7628_GPIO_MODE_WLED_KN),
- { 0 }
- };
-
-@@ -542,7 +562,11 @@ void prom_soc_init(struct ralink_soc_inf
- (rev & CHIP_REV_ECO_MASK));
-
- cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
-- dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
-+
-+ if (ralink_soc == MT762X_SOC_MT7628AN)
-+ dram_type = ((cfg0&0x00000001) == 0x00000001)?SYSCFG0_DRAM_TYPE_DDR1_MT7628:SYSCFG0_DRAM_TYPE_DDR2_MT7628;
-+ else
-+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
-
- soc_info->mem_base = MT7620_DRAM_BASE;
- if (mt762x_soc == MT762X_SOC_MT7628AN)
diff --git a/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch b/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch
deleted file mode 100644
index f54acb8d36..0000000000
--- a/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 14ef339843c24bf449d0f6d8bc176368c331c2c8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:29:00 +0100
-Subject: [PATCH 21/53] arch: mips: ralink: add mt7688 detection
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
- arch/mips/include/asm/mach-ralink/ralink_regs.h | 1 +
- arch/mips/ralink/mt7620.c | 21 ++++++++++++++++-----
- 3 files changed, 18 insertions(+), 5 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -17,6 +17,7 @@
-
- #define SYSC_REG_CHIP_NAME0 0x00
- #define SYSC_REG_CHIP_NAME1 0x04
-+#define SYSC_REG_EFUSE_CFG 0x08
- #define SYSC_REG_CHIP_REV 0x0c
- #define SYSC_REG_SYSTEM_CONFIG0 0x10
- #define SYSC_REG_SYSTEM_CONFIG1 0x14
---- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
-+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-@@ -24,6 +24,7 @@ enum ralink_soc_type {
- MT762X_SOC_MT7620N,
- MT762X_SOC_MT7621AT,
- MT762X_SOC_MT7628AN,
-+ MT762X_SOC_MT7688,
- };
- extern enum ralink_soc_type ralink_soc;
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -46,6 +46,9 @@ enum mt762x_soc_type mt762x_soc;
- #define CLKCFG_FFRAC_MASK 0x001f
- #define CLKCFG_FFRAC_USB_VAL 0x0003
-
-+/* EFUSE bits */
-+#define EFUSE_MT7688 0x100000
-+
- /* does the board have sdram or ddram */
- static int dram_type;
-
-@@ -407,7 +410,7 @@ void __init ralink_clk_init(void)
- #define RINT(x) ((x) / 1000000)
- #define RFRAC(x) (((x) / 1000) % 1000)
-
-- if (mt762x_soc == MT762X_SOC_MT7628AN) {
-+ if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688) {
- if (xtal_rate == MHZ(40))
- cpu_rate = MHZ(580);
- else
-@@ -451,7 +454,8 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000c00.uartlite", periph_rate);
- ralink_clk_add("10180000.wmac", xtal_rate);
-
-- if (IS_ENABLED(CONFIG_USB)) {
-+ if (IS_ENABLED(CONFIG_USB) &&
-+ (mt762x_soc == MT762X_SOC_MT7620A || mt762x_soc == MT762X_SOC_MT7620N)) {
- /*
- * When the CPU goes into sleep mode, the BUS clock will be too low for
- * USB to function properly
-@@ -548,8 +552,15 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->compatible = "ralink,mt7620n-soc";
- }
- } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-- mt762x_soc = MT762X_SOC_MT7628AN;
-- name = "MT7628AN";
-+ u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
-+
-+ if (efuse & EFUSE_MT7688) {
-+ mt762x_soc = MT762X_SOC_MT7688;
-+ name = "MT7688";
-+ } else {
-+ mt762x_soc = MT762X_SOC_MT7628AN;
-+ name = "MT7628AN";
-+ }
- soc_info->compatible = "ralink,mt7628an-soc";
- } else {
- panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-@@ -582,7 +593,7 @@ void prom_soc_init(struct ralink_soc_inf
- pr_info("Digital PMU set to %s control\n",
- (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
-
-- if (mt762x_soc == MT762X_SOC_MT7628AN)
-+ if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688)
- rt2880_pinmux_data = mt7628an_pinmux_data;
- else
- rt2880_pinmux_data = mt7620a_pinmux_data;
diff --git a/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch b/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch
deleted file mode 100644
index 967b83e391..0000000000
--- a/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 2e5d90398aacde3e46dfd87e6f716b00a0ffcd83 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:30:11 +0100
-Subject: [PATCH 22/53] arch: mips: ralink: proper vendor id srtring
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -567,7 +567,7 @@ void prom_soc_init(struct ralink_soc_inf
- }
-
- snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-- "Ralink %s ver:%u eco:%u",
-+ "MediaTek %s ver:%u eco:%u",
- name,
- (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
- (rev & CHIP_REV_ECO_MASK));
diff --git a/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch b/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch
deleted file mode 100644
index 5d7f045445..0000000000
--- a/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 4ede4fbb485d0a88839df1f02371fc00755db636 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:31:41 +0100
-Subject: [PATCH 23/53] arch: mips: ralink: unify soc id
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 19 ++++++++-----------
- 1 file changed, 8 insertions(+), 11 deletions(-)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -37,9 +37,6 @@
- #define PMU1_CFG 0x8C
- #define DIG_SW_SEL BIT(25)
-
--/* is this a MT7620 or a MT7628 */
--enum mt762x_soc_type mt762x_soc;
--
- /* clock scaling */
- #define CLKCFG_FDIV_MASK 0x1f00
- #define CLKCFG_FDIV_USB_VAL 0x0300
-@@ -410,7 +407,7 @@ void __init ralink_clk_init(void)
- #define RINT(x) ((x) / 1000000)
- #define RFRAC(x) (((x) / 1000) % 1000)
-
-- if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688) {
-+ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
- if (xtal_rate == MHZ(40))
- cpu_rate = MHZ(580);
- else
-@@ -455,7 +452,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10180000.wmac", xtal_rate);
-
- if (IS_ENABLED(CONFIG_USB) &&
-- (mt762x_soc == MT762X_SOC_MT7620A || mt762x_soc == MT762X_SOC_MT7620N)) {
-+ (ralink_soc == MT762X_SOC_MT7620A || ralink_soc == MT762X_SOC_MT7620N)) {
- /*
- * When the CPU goes into sleep mode, the BUS clock will be too low for
- * USB to function properly
-@@ -543,11 +540,11 @@ void prom_soc_init(struct ralink_soc_inf
-
- if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
- if (bga) {
-- mt762x_soc = MT762X_SOC_MT7620A;
-+ ralink_soc = MT762X_SOC_MT7620A;
- name = "MT7620A";
- soc_info->compatible = "ralink,mt7620a-soc";
- } else {
-- mt762x_soc = MT762X_SOC_MT7620N;
-+ ralink_soc = MT762X_SOC_MT7620N;
- name = "MT7620N";
- soc_info->compatible = "ralink,mt7620n-soc";
- }
-@@ -555,10 +552,10 @@ void prom_soc_init(struct ralink_soc_inf
- u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
-
- if (efuse & EFUSE_MT7688) {
-- mt762x_soc = MT762X_SOC_MT7688;
-+ ralink_soc = MT762X_SOC_MT7688;
- name = "MT7688";
- } else {
-- mt762x_soc = MT762X_SOC_MT7628AN;
-+ ralink_soc = MT762X_SOC_MT7628AN;
- name = "MT7628AN";
- }
- soc_info->compatible = "ralink,mt7628an-soc";
-@@ -580,7 +577,7 @@ void prom_soc_init(struct ralink_soc_inf
- dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
-
- soc_info->mem_base = MT7620_DRAM_BASE;
-- if (mt762x_soc == MT762X_SOC_MT7628AN)
-+ if (ralink_soc == MT762X_SOC_MT7628AN)
- mt7628_dram_init(soc_info);
- else
- mt7620_dram_init(soc_info);
-@@ -593,7 +590,7 @@ void prom_soc_init(struct ralink_soc_inf
- pr_info("Digital PMU set to %s control\n",
- (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
-
-- if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688)
-+ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688)
- rt2880_pinmux_data = mt7628an_pinmux_data;
- else
- rt2880_pinmux_data = mt7620a_pinmux_data;
diff --git a/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index 71daf28274..0000000000
--- a/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 24/53] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib-sysfs.c | 10 +++++-
- include/asm-generic/gpio.h | 6 ++++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 91 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
-
-@@ -450,3 +452,69 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int __init of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+};
-+
-+static int __init of_gpio_export_init(void)
-+{
-+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
-+}
-+device_initcall(of_gpio_export_init);
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -544,7 +544,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- struct gpiod_data *data;
-@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, chip->dev,
- MKDEV(0, 0), data, gpio_groups,
-@@ -625,6 +627,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *desc)
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -426,6 +426,7 @@ static inline struct gpio_desc *devm_get
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -433,6 +434,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
diff --git a/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch
deleted file mode 100644
index b8c4f2c09a..0000000000
--- a/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch
+++ /dev/null
@@ -1,526 +0,0 @@
-From 7adbe9a88c33c6e362a10b109d963b5500a21f00 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:34:05 +0100
-Subject: [PATCH 25/53] pinctrl: ralink: add pinctrl driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 2 +
- drivers/pinctrl/Kconfig | 5 +
- drivers/pinctrl/Makefile | 1 +
- drivers/pinctrl/pinctrl-rt2880.c | 474 ++++++++++++++++++++++++++++++++++++++
- 4 files changed, 482 insertions(+)
- create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -557,6 +557,8 @@ config RALINK
- select CLKDEV_LOOKUP
- select ARCH_HAS_RESET_CONTROLLER
- select RESET_CONTROLLER
-+ select PINCTRL
-+ select PINCTRL_RT2880
-
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -103,6 +103,11 @@ config PINCTRL_LPC18XX
- help
- Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
-
-+config PINCTRL_RT2880
-+ bool
-+ depends on RALINK
-+ select PINMUX
-+
- config PINCTRL_FALCON
- bool
- depends on SOC_FALCON
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_MESON) += meson/
- obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
- obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
- obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
-+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
- obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
- obj-$(CONFIG_PINCTRL_SIRF) += sirf/
- obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o
---- /dev/null
-+++ b/drivers/pinctrl/pinctrl-rt2880.c
-@@ -0,0 +1,474 @@
-+/*
-+ * linux/drivers/pinctrl/pinctrl-rt2880.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/of.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/pinmux.h>
-+#include <asm/mach-ralink/mt7620.h>
-+
-+#include "core.h"
-+
-+#define SYSC_REG_GPIO_MODE 0x60
-+#define SYSC_REG_GPIO_MODE2 0x64
-+
-+struct rt2880_priv {
-+ struct device *dev;
-+
-+ struct pinctrl_pin_desc *pads;
-+ struct pinctrl_desc *desc;
-+
-+ struct rt2880_pmx_func **func;
-+ int func_count;
-+
-+ struct rt2880_pmx_group *groups;
-+ const char **group_names;
-+ int group_count;
-+
-+ uint8_t *gpio;
-+ int max_pins;
-+};
-+
-+struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
-+
-+static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->group_count;
-+}
-+
-+static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return NULL;
-+
-+ return p->group_names[group];
-+}
-+
-+static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
-+ unsigned group,
-+ const unsigned **pins,
-+ unsigned *num_pins)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return -EINVAL;
-+
-+ *pins = p->groups[group].func[0].pins;
-+ *num_pins = p->groups[group].func[0].pin_count;
-+
-+ return 0;
-+}
-+
-+static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_map *map, unsigned num_maps)
-+{
-+ int i;
-+
-+ for (i = 0; i < num_maps; i++)
-+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
-+ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
-+ kfree(map[i].data.configs.configs);
-+ kfree(map);
-+}
-+
-+static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev,
-+ struct seq_file *s,
-+ unsigned offset)
-+{
-+ seq_printf(s, "ralink pio");
-+}
-+
-+static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np,
-+ struct pinctrl_map **map)
-+{
-+ const char *function;
-+ int func = of_property_read_string(np, "ralink,function", &function);
-+ int grps = of_property_count_strings(np, "ralink,group");
-+ int i;
-+
-+ if (func || !grps)
-+ return;
-+
-+ for (i = 0; i < grps; i++) {
-+ const char *group;
-+
-+ of_property_read_string_index(np, "ralink,group", i, &group);
-+
-+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
-+ (*map)->name = function;
-+ (*map)->data.mux.group = group;
-+ (*map)->data.mux.function = function;
-+ (*map)++;
-+ }
-+}
-+
-+static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np_config,
-+ struct pinctrl_map **map,
-+ unsigned *num_maps)
-+{
-+ int max_maps = 0;
-+ struct pinctrl_map *tmp;
-+ struct device_node *np;
-+
-+ for_each_child_of_node(np_config, np) {
-+ int ret = of_property_count_strings(np, "ralink,group");
-+
-+ if (ret >= 0)
-+ max_maps += ret;
-+ }
-+
-+ if (!max_maps)
-+ return max_maps;
-+
-+ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
-+ if (!*map)
-+ return -ENOMEM;
-+
-+ tmp = *map;
-+
-+ for_each_child_of_node(np_config, np)
-+ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp);
-+ *num_maps = max_maps;
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops rt2880_pctrl_ops = {
-+ .get_groups_count = rt2880_get_group_count,
-+ .get_group_name = rt2880_get_group_name,
-+ .get_group_pins = rt2880_get_group_pins,
-+ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show,
-+ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map,
-+ .dt_free_map = rt2880_pinctrl_dt_free_map,
-+};
-+
-+static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func_count;
-+}
-+
-+static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
-+ unsigned func)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func[func]->name;
-+}
-+
-+static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ const char * const **groups,
-+ unsigned * const num_groups)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (p->func[func]->group_count == 1)
-+ *groups = &p->group_names[p->func[func]->groups[0]];
-+ else
-+ *groups = p->group_names;
-+
-+ *num_groups = p->func[func]->group_count;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+ u32 mode = 0;
-+ u32 reg = SYSC_REG_GPIO_MODE;
-+ int i;
-+ int shift;
-+
-+ /* dont allow double use */
-+ if (p->groups[group].enabled) {
-+ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name);
-+ return -EBUSY;
-+ }
-+
-+ p->groups[group].enabled = 1;
-+ p->func[func]->enabled = 1;
-+
-+ shift = p->groups[group].shift;
-+ if (shift >= 32) {
-+ shift -= 32;
-+ reg = SYSC_REG_GPIO_MODE2;
-+ }
-+ mode = rt_sysc_r32(reg);
-+ mode &= ~(p->groups[group].mask << shift);
-+
-+ /* mark the pins as gpio */
-+ for (i = 0; i < p->groups[group].func[0].pin_count; i++)
-+ p->gpio[p->groups[group].func[0].pins[i]] = 1;
-+
-+ /* function 0 is gpio and needs special handling */
-+ if (func == 0) {
-+ mode |= p->groups[group].gpio << shift;
-+ } else {
-+ for (i = 0; i < p->func[func]->pin_count; i++)
-+ p->gpio[p->func[func]->pins[i]] = 0;
-+ mode |= p->func[func]->value << shift;
-+ }
-+ rt_sysc_w32(mode, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned pin)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (!p->gpio[pin]) {
-+ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct pinmux_ops rt2880_pmx_group_ops = {
-+ .get_functions_count = rt2880_pmx_func_count,
-+ .get_function_name = rt2880_pmx_func_name,
-+ .get_function_groups = rt2880_pmx_group_get_groups,
-+ .set_mux = rt2880_pmx_group_enable,
-+ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
-+};
-+
-+static struct pinctrl_desc rt2880_pctrl_desc = {
-+ .owner = THIS_MODULE,
-+ .name = "rt2880-pinmux",
-+ .pctlops = &rt2880_pctrl_ops,
-+ .pmxops = &rt2880_pmx_group_ops,
-+};
-+
-+static struct rt2880_pmx_func gpio_func = {
-+ .name = "gpio",
-+};
-+
-+static int rt2880_pinmux_index(struct rt2880_priv *p)
-+{
-+ struct rt2880_pmx_func **f;
-+ struct rt2880_pmx_group *mux = p->groups;
-+ int i, j, c = 0;
-+
-+ /* count the mux functions */
-+ while (mux->name) {
-+ p->group_count++;
-+ mux++;
-+ }
-+
-+ /* allocate the group names array needed by the gpio function */
-+ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
-+ if (!p->group_names)
-+ return -1;
-+
-+ for (i = 0; i < p->group_count; i++) {
-+ p->group_names[i] = p->groups[i].name;
-+ p->func_count += p->groups[i].func_count;
-+ }
-+
-+ /* we have a dummy function[0] for gpio */
-+ p->func_count++;
-+
-+ /* allocate our function and group mapping index buffers */
-+ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL);
-+ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
-+ if (!f || !gpio_func.groups)
-+ return -1;
-+
-+ /* add a backpointer to the function so it knows its group */
-+ gpio_func.group_count = p->group_count;
-+ for (i = 0; i < gpio_func.group_count; i++)
-+ gpio_func.groups[i] = i;
-+
-+ f[c] = &gpio_func;
-+ c++;
-+
-+ /* add remaining functions */
-+ for (i = 0; i < p->group_count; i++) {
-+ for (j = 0; j < p->groups[i].func_count; j++) {
-+ f[c] = &p->groups[i].func[j];
-+ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
-+ f[c]->groups[0] = i;
-+ f[c]->group_count = 1;
-+ c++;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_pins(struct rt2880_priv *p)
-+{
-+ int i, j;
-+
-+ /* loop over the functions and initialize the pins array. also work out the highest pin used */
-+ for (i = 0; i < p->func_count; i++) {
-+ int pin;
-+
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL);
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->func[i]->pins[j] = p->func[i]->pin_first + j;
-+
-+ pin = p->func[i]->pin_first + p->func[i]->pin_count;
-+ if (pin > p->max_pins)
-+ p->max_pins = pin;
-+ }
-+
-+ /* the buffer that tells us which pins are gpio */
-+ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins,
-+ GFP_KERNEL);
-+ /* the pads needed to tell pinctrl about our pins */
-+ p->pads = devm_kzalloc(p->dev,
-+ sizeof(struct pinctrl_pin_desc) * p->max_pins,
-+ GFP_KERNEL);
-+ if (!p->pads || !p->gpio ) {
-+ dev_err(p->dev, "Failed to allocate gpio data\n");
-+ return -ENOMEM;
-+ }
-+
-+ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins);
-+ for (i = 0; i < p->func_count; i++) {
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->gpio[p->func[i]->pins[j]] = 0;
-+ }
-+
-+ /* pin 0 is always a gpio */
-+ p->gpio[0] = 1;
-+
-+ /* set the pads */
-+ for (i = 0; i < p->max_pins; i++) {
-+ /* strlen("ioXY") + 1 = 5 */
-+ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL);
-+
-+ if (!name) {
-+ dev_err(p->dev, "Failed to allocate pad name\n");
-+ return -ENOMEM;
-+ }
-+ snprintf(name, 5, "io%d", i);
-+ p->pads[i].number = i;
-+ p->pads[i].name = name;
-+ }
-+ p->desc->pins = p->pads;
-+ p->desc->npins = p->max_pins;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_probe(struct platform_device *pdev)
-+{
-+ struct rt2880_priv *p;
-+ struct pinctrl_dev *dev;
-+ struct device_node *np;
-+
-+ if (!rt2880_pinmux_data)
-+ return -ENOSYS;
-+
-+ /* setup the private data */
-+ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
-+ if (!p)
-+ return -ENOMEM;
-+
-+ p->dev = &pdev->dev;
-+ p->desc = &rt2880_pctrl_desc;
-+ p->groups = rt2880_pinmux_data;
-+ platform_set_drvdata(pdev, p);
-+
-+ /* init the device */
-+ if (rt2880_pinmux_index(p)) {
-+ dev_err(&pdev->dev, "failed to load index\n");
-+ return -EINVAL;
-+ }
-+ if (rt2880_pinmux_pins(p)) {
-+ dev_err(&pdev->dev, "failed to load pins\n");
-+ return -EINVAL;
-+ }
-+ dev = pinctrl_register(p->desc, &pdev->dev, p);
-+ if (IS_ERR(dev))
-+ return PTR_ERR(dev);
-+
-+ /* finalize by adding gpio ranges for enables gpio controllers */
-+ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") {
-+ const __be32 *ngpio, *gpiobase;
-+ struct pinctrl_gpio_range *range;
-+ char *name;
-+
-+ if (!of_device_is_available(np))
-+ continue;
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (!ngpio || !gpiobase) {
-+ dev_err(&pdev->dev, "failed to load chip info\n");
-+ return -EINVAL;
-+ }
-+
-+ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL);
-+ range->name = name = (char *) &range[1];
-+ sprintf(name, "pio");
-+ range->npins = __be32_to_cpu(*ngpio);
-+ range->base = __be32_to_cpu(*gpiobase);
-+ range->pin_base = range->base;
-+ pinctrl_add_gpio_range(dev, range);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id rt2880_pinmux_match[] = {
-+ { .compatible = "ralink,rt2880-pinmux" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_pinmux_match);
-+
-+static struct platform_driver rt2880_pinmux_driver = {
-+ .probe = rt2880_pinmux_probe,
-+ .driver = {
-+ .name = "rt2880-pinmux",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_pinmux_match,
-+ },
-+};
-+
-+int __init rt2880_pinmux_init(void)
-+{
-+ return platform_driver_register(&rt2880_pinmux_driver);
-+}
-+
-+core_initcall_sync(rt2880_pinmux_init);
diff --git a/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch
deleted file mode 100644
index 7d5f98f647..0000000000
--- a/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 19:45:30 +0200
-Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
-
-Describe gpio-ralink binding.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: devicetree@vger.kernel.org
-Cc: linux-gpio@vger.kernel.org
----
- .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -0,0 +1,40 @@
-+Ralink SoC GPIO controller bindings
-+
-+Required properties:
-+- compatible:
-+ - "ralink,rt2880-gpio" for Ralink controllers
-+- #gpio-cells : Should be two.
-+ - first cell is the pin number
-+ - second cell is used to specify optional parameters (unused)
-+- gpio-controller : Marks the device node as a GPIO controller
-+- reg : Physical base address and length of the controller's registers
-+- interrupt-parent: phandle to the INTC device node
-+- interrupts : Specify the INTC interrupt number
-+- ralink,num-gpios : Specify the number of GPIOs
-+- ralink,register-map : The register layout depends on the GPIO bank and actual
-+ SoC type. Register offsets need to be in this order.
-+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
-+
-+Optional properties:
-+- ralink,gpio-base : Specify the GPIO chips base number
-+
-+Example:
-+
-+ gpio0: gpio@600 {
-+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+
-+ reg = <0x600 0x34>;
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <6>;
-+
-+ ralink,gpio-base = <0>;
-+ ralink,num-gpios = <24>;
-+ ralink,register-map = [ 00 04 08 0c
-+ 20 24 28 2c
-+ 30 34 ];
-+
-+ };
diff --git a/target/linux/ramips/patches-4.3/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-4.3/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
deleted file mode 100644
index f1e2169fee..0000000000
--- a/target/linux/ramips/patches-4.3/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ /dev/null
@@ -1,430 +0,0 @@
-From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 20:36:29 +0200
-Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC
-
-Add gpio driver for Ralink SoC. This driver makes the gpio core on
-RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: linux-gpio@vger.kernel.org
----
- arch/mips/include/asm/mach-ralink/gpio.h | 24 ++
- drivers/gpio/Kconfig | 6 +
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++
- 4 files changed, 386 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
- create mode 100644 drivers/gpio/gpio-ralink.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/gpio.h
-@@ -0,0 +1,24 @@
-+/*
-+ * Ralink SoC GPIO API support
-+ *
-+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __ASM_MACH_RALINK_GPIO_H
-+#define __ASM_MACH_RALINK_GPIO_H
-+
-+#define ARCH_NR_GPIOS 128
-+#include <asm-generic/gpio.h>
-+
-+#define gpio_get_value __gpio_get_value
-+#define gpio_set_value __gpio_set_value
-+#define gpio_cansleep __gpio_cansleep
-+#define gpio_to_irq __gpio_to_irq
-+
-+#endif /* __ASM_MACH_RALINK_GPIO_H */
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -404,6 +404,12 @@ config GPIO_SCH311X
- To compile this driver as a module, choose M here: the module will
- be called gpio-sch311x.
-
-+config GPIO_RALINK
-+ bool "Ralink GPIO Support"
-+ depends on RALINK
-+ help
-+ Say yes here to support the Ralink SoC GPIO device
-+
- config GPIO_SPEAR_SPICS
- bool "ST SPEAr13xx SPI Chip Select as GPIO support"
- depends on PLAT_SPEAR
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -75,6 +75,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf85
- obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
- obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
- obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
-+obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
- obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
- obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
- obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ralink.c
-@@ -0,0 +1,355 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/spinlock.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+#include <linux/interrupt.h>
-+
-+enum ralink_gpio_reg {
-+ GPIO_REG_INT = 0,
-+ GPIO_REG_EDGE,
-+ GPIO_REG_RENA,
-+ GPIO_REG_FENA,
-+ GPIO_REG_DATA,
-+ GPIO_REG_DIR,
-+ GPIO_REG_POL,
-+ GPIO_REG_SET,
-+ GPIO_REG_RESET,
-+ GPIO_REG_TOGGLE,
-+ GPIO_REG_MAX
-+};
-+
-+struct ralink_gpio_chip {
-+ struct gpio_chip chip;
-+ u8 regs[GPIO_REG_MAX];
-+
-+ spinlock_t lock;
-+ void __iomem *membase;
-+ struct irq_domain *domain;
-+ int irq;
-+
-+ u32 rising;
-+ u32 falling;
-+};
-+
-+#define MAP_MAX 4
-+static struct irq_domain *irq_map[MAP_MAX];
-+static int irq_map_count;
-+static atomic_t irq_refcount = ATOMIC_INIT(0);
-+
-+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
-+{
-+ struct ralink_gpio_chip *rg;
-+
-+ rg = container_of(chip, struct ralink_gpio_chip, chip);
-+
-+ return rg;
-+}
-+
-+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
-+{
-+ iowrite32(val, rg->membase + rg->regs[reg]);
-+}
-+
-+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
-+{
-+ return ioread32(rg->membase + rg->regs[reg]);
-+}
-+
-+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
-+}
-+
-+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
-+}
-+
-+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+ t &= ~BIT(offset);
-+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ralink_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned offset, int value)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ ralink_gpio_set(chip, offset, value);
-+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
-+ t |= BIT(offset);
-+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-+{
-+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
-+
-+ if (rg->irq < 1)
-+ return -1;
-+
-+ return irq_create_mapping(rg->domain, pin);
-+}
-+
-+static void ralink_gpio_irq_handler(struct irq_desc *desc)
-+{
-+ int i;
-+
-+ for (i = 0; i < irq_map_count; i++) {
-+ struct irq_domain *domain = irq_map[i];
-+ struct ralink_gpio_chip *rg;
-+ unsigned long pending;
-+ int bit;
-+
-+ rg = (struct ralink_gpio_chip *) domain->host_data;
-+ pending = rt_gpio_r32(rg, GPIO_REG_INT);
-+
-+ for_each_set_bit(bit, &pending, rg->chip.ngpio) {
-+ u32 map = irq_find_mapping(domain, bit);
-+ generic_handle_irq(map);
-+ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit));
-+ }
-+ }
-+}
-+
-+static void ralink_gpio_irq_unmask(struct irq_data *d)
-+{
-+ struct ralink_gpio_chip *rg;
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
-+ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising));
-+ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static void ralink_gpio_irq_mask(struct irq_data *d)
-+{
-+ struct ralink_gpio_chip *rg;
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+ rise = rt_gpio_r32(rg, GPIO_REG_RENA);
-+ fall = rt_gpio_r32(rg, GPIO_REG_FENA);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq));
-+ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+ struct ralink_gpio_chip *rg;
-+ u32 mask = BIT(d->hwirq);
-+
-+ rg = (struct ralink_gpio_chip *) d->domain->host_data;
-+
-+ if (type == IRQ_TYPE_PROBE) {
-+ if ((rg->rising | rg->falling) & mask)
-+ return 0;
-+
-+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-+ }
-+
-+ if (type & IRQ_TYPE_EDGE_RISING)
-+ rg->rising |= mask;
-+ else
-+ rg->rising &= ~mask;
-+
-+ if (type & IRQ_TYPE_EDGE_FALLING)
-+ rg->falling |= mask;
-+ else
-+ rg->falling &= ~mask;
-+
-+ return 0;
-+}
-+
-+static struct irq_chip ralink_gpio_irq_chip = {
-+ .name = "GPIO",
-+ .irq_unmask = ralink_gpio_irq_unmask,
-+ .irq_mask = ralink_gpio_irq_mask,
-+ .irq_mask_ack = ralink_gpio_irq_mask,
-+ .irq_set_type = ralink_gpio_irq_type,
-+};
-+
-+static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq);
-+ irq_set_handler_data(irq, d);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = gpio_map,
-+};
-+
-+static void ralink_gpio_irq_init(struct device_node *np,
-+ struct ralink_gpio_chip *rg)
-+{
-+ if (irq_map_count >= MAP_MAX)
-+ return;
-+
-+ rg->irq = irq_of_parse_and_map(np, 0);
-+ if (!rg->irq)
-+ return;
-+
-+ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio,
-+ &irq_domain_ops, rg);
-+ if (!rg->domain) {
-+ dev_err(rg->chip.dev, "irq_domain_add_linear failed\n");
-+ return;
-+ }
-+
-+ irq_map[irq_map_count++] = rg->domain;
-+
-+ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0);
-+ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0);
-+
-+ if (!atomic_read(&irq_refcount))
-+ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler);
-+ atomic_inc(&irq_refcount);
-+
-+ dev_info(rg->chip.dev, "registering %d irq handlers\n", rg->chip.ngpio);
-+}
-+
-+static int ralink_gpio_request(struct gpio_chip *chip, unsigned offset)
-+{
-+ int gpio = chip->base + offset;
-+
-+ return pinctrl_request_gpio(gpio);
-+}
-+
-+static void ralink_gpio_free(struct gpio_chip *chip, unsigned offset)
-+{
-+ int gpio = chip->base + offset;
-+
-+ pinctrl_free_gpio(gpio);
-+}
-+
-+static int ralink_gpio_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ struct ralink_gpio_chip *rg;
-+ const __be32 *ngpio, *gpiobase;
-+
-+ if (!res) {
-+ dev_err(&pdev->dev, "failed to find resource\n");
-+ return -ENOMEM;
-+ }
-+
-+ rg = devm_kzalloc(&pdev->dev,
-+ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
-+ if (!rg)
-+ return -ENOMEM;
-+
-+ rg->membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (!rg->membase) {
-+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
-+ return -ENOMEM;
-+ }
-+
-+ if (of_property_read_u8_array(np, "ralink,register-map",
-+ rg->regs, GPIO_REG_MAX)) {
-+ dev_err(&pdev->dev, "failed to read register definition\n");
-+ return -EINVAL;
-+ }
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ if (!ngpio) {
-+ dev_err(&pdev->dev, "failed to read number of pins\n");
-+ return -EINVAL;
-+ }
-+
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (gpiobase)
-+ rg->chip.base = be32_to_cpu(*gpiobase);
-+ else
-+ rg->chip.base = -1;
-+
-+ spin_lock_init(&rg->lock);
-+
-+ rg->chip.dev = &pdev->dev;
-+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = np;
-+ rg->chip.ngpio = be32_to_cpu(*ngpio);
-+ rg->chip.direction_input = ralink_gpio_direction_input;
-+ rg->chip.direction_output = ralink_gpio_direction_output;
-+ rg->chip.get = ralink_gpio_get;
-+ rg->chip.set = ralink_gpio_set;
-+ rg->chip.request = ralink_gpio_request;
-+ rg->chip.to_irq = ralink_gpio_to_irq;
-+ rg->chip.free = ralink_gpio_free;
-+
-+ /* set polarity to low for all lines */
-+ rt_gpio_w32(rg, GPIO_REG_POL, 0);
-+
-+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
-+
-+ ralink_gpio_irq_init(np, rg);
-+
-+ return gpiochip_add(&rg->chip);
-+}
-+
-+static const struct of_device_id ralink_gpio_match[] = {
-+ { .compatible = "ralink,rt2880-gpio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_gpio_match);
-+
-+static struct platform_driver ralink_gpio_driver = {
-+ .probe = ralink_gpio_probe,
-+ .driver = {
-+ .name = "rt2880_gpio",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ralink_gpio_match,
-+ },
-+};
-+
-+static int __init ralink_gpio_init(void)
-+{
-+ return platform_driver_register(&ralink_gpio_driver);
-+}
-+
-+subsys_initcall(ralink_gpio_init);
diff --git a/target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch
deleted file mode 100644
index e18032d1ca..0000000000
--- a/target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch
+++ /dev/null
@@ -1,405 +0,0 @@
-From 61ac7d9b4228de8c332900902c2b93189b042eab Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 11:00:32 +0100
-Subject: [PATCH 28/53] GPIO: ralink: add mt7621 gpio controller
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 3 +
- drivers/gpio/Kconfig | 6 +
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-mt7621.c | 354 ++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 364 insertions(+)
- create mode 100644 drivers/gpio/gpio-mt7621.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -559,6 +559,9 @@ config RALINK
- select RESET_CONTROLLER
- select PINCTRL
- select PINCTRL_RT2880
-+ select ARCH_HAS_RESET_CONTROLLER
-+ select RESET_CONTROLLER
-+ select ARCH_REQUIRE_GPIOLIB
-
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -269,6 +269,12 @@ config GPIO_MB86S7X
- help
- Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
-
-+config GPIO_MT7621
-+ bool "Mediatek GPIO Support"
-+ depends on SOC_MT7620 || SOC_MT7621
-+ help
-+ Say yes here to support the Mediatek SoC GPIO device
-+
- config GPIO_MM_LANTIQ
- bool "Lantiq Memory mapped GPIOs"
- depends on LANTIQ && SOC_XWAY
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -119,3 +119,4 @@ obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa
- obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
- obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
- obj-$(CONFIG_GPIO_ZX) += gpio-zx.o
-+obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
---- /dev/null
-+++ b/drivers/gpio/gpio-mt7621.c
-@@ -0,0 +1,354 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/gpio.h>
-+#include <linux/module.h>
-+#include <linux/of_irq.h>
-+#include <linux/spinlock.h>
-+#include <linux/irqdomain.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+
-+#define MTK_MAX_BANK 3
-+#define MTK_BANK_WIDTH 32
-+
-+enum mediatek_gpio_reg {
-+ GPIO_REG_CTRL = 0,
-+ GPIO_REG_POL,
-+ GPIO_REG_DATA,
-+ GPIO_REG_DSET,
-+ GPIO_REG_DCLR,
-+ GPIO_REG_REDGE,
-+ GPIO_REG_FEDGE,
-+ GPIO_REG_HLVL,
-+ GPIO_REG_LLVL,
-+ GPIO_REG_STAT,
-+ GPIO_REG_EDGE,
-+};
-+
-+static void __iomem *mediatek_gpio_membase;
-+static int mediatek_gpio_irq;
-+static struct irq_domain *mediatek_gpio_irq_domain;
-+static atomic_t irq_refcount = ATOMIC_INIT(0);
-+
-+struct mtk_gc {
-+ struct gpio_chip chip;
-+ spinlock_t lock;
-+ int bank;
-+ u32 rising;
-+ u32 falling;
-+} *gc_map[MTK_MAX_BANK];
-+
-+static inline struct mtk_gc
-+*to_mediatek_gpio(struct gpio_chip *chip)
-+{
-+ struct mtk_gc *mgc;
-+
-+ mgc = container_of(chip, struct mtk_gc, chip);
-+
-+ return mgc;
-+}
-+
-+static inline void
-+mtk_gpio_w32(struct mtk_gc *rg, u8 reg, u32 val)
-+{
-+ iowrite32(val, mediatek_gpio_membase + (reg * 0x10) + (rg->bank * 0x4));
-+}
-+
-+static inline u32
-+mtk_gpio_r32(struct mtk_gc *rg, u8 reg)
-+{
-+ return ioread32(mediatek_gpio_membase + (reg * 0x10) + (rg->bank * 0x4));
-+}
-+
-+static void
-+mediatek_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+
-+ mtk_gpio_w32(rg, (value) ? GPIO_REG_DSET : GPIO_REG_DCLR, BIT(offset));
-+}
-+
-+static int
-+mediatek_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+
-+ return !!(mtk_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
-+}
-+
-+static int
-+mediatek_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
-+ t &= ~BIT(offset);
-+ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int
-+mediatek_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned offset, int value)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
-+ t |= BIT(offset);
-+ mtk_gpio_w32(rg, GPIO_REG_CTRL, t);
-+ mediatek_gpio_set(chip, offset, value);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int
-+mediatek_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+ unsigned long flags;
-+ u32 t;
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ t = mtk_gpio_r32(rg, GPIO_REG_CTRL);
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+
-+ if (t & BIT(offset))
-+ return 0;
-+
-+ return 1;
-+}
-+
-+static int
-+mediatek_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-+{
-+ struct mtk_gc *rg = to_mediatek_gpio(chip);
-+
-+ return irq_create_mapping(mediatek_gpio_irq_domain, pin + (rg->bank * MTK_BANK_WIDTH));
-+}
-+
-+static int
-+mediatek_gpio_bank_probe(struct platform_device *pdev, struct device_node *bank)
-+{
-+ const __be32 *id = of_get_property(bank, "reg", NULL);
-+ struct mtk_gc *rg = devm_kzalloc(&pdev->dev,
-+ sizeof(struct mtk_gc), GFP_KERNEL);
-+
-+ if (!rg || !id || be32_to_cpu(*id) > MTK_MAX_BANK)
-+ return -ENOMEM;
-+
-+ gc_map[be32_to_cpu(*id)] = rg;
-+
-+ memset(rg, 0, sizeof(struct mtk_gc));
-+
-+ spin_lock_init(&rg->lock);
-+
-+ rg->chip.dev = &pdev->dev;
-+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = bank;
-+ rg->chip.base = MTK_BANK_WIDTH * be32_to_cpu(*id);
-+ rg->chip.ngpio = MTK_BANK_WIDTH;
-+ rg->chip.direction_input = mediatek_gpio_direction_input;
-+ rg->chip.direction_output = mediatek_gpio_direction_output;
-+ rg->chip.get_direction = mediatek_gpio_get_direction;
-+ rg->chip.get = mediatek_gpio_get;
-+ rg->chip.set = mediatek_gpio_set;
-+ if (mediatek_gpio_irq_domain)
-+ rg->chip.to_irq = mediatek_gpio_to_irq;
-+ rg->bank = be32_to_cpu(*id);
-+
-+ /* set polarity to low for all gpios */
-+ mtk_gpio_w32(rg, GPIO_REG_POL, 0);
-+
-+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio);
-+
-+ return gpiochip_add(&rg->chip);
-+}
-+
-+static void
-+mediatek_gpio_irq_handler(struct irq_desc *desc)
-+{
-+ int i;
-+
-+ for (i = 0; i < MTK_MAX_BANK; i++) {
-+ struct mtk_gc *rg = gc_map[i];
-+ unsigned long pending;
-+ int bit;
-+
-+ if (!rg)
-+ continue;
-+
-+ pending = mtk_gpio_r32(rg, GPIO_REG_STAT);
-+
-+ for_each_set_bit(bit, &pending, MTK_BANK_WIDTH) {
-+ u32 map = irq_find_mapping(mediatek_gpio_irq_domain, (MTK_BANK_WIDTH * i) + bit);
-+
-+ generic_handle_irq(map);
-+ mtk_gpio_w32(rg, GPIO_REG_STAT, BIT(bit));
-+ }
-+ }
-+}
-+
-+static void
-+mediatek_gpio_irq_unmask(struct irq_data *d)
-+{
-+ int pin = d->hwirq;
-+ int bank = pin / 32;
-+ struct mtk_gc *rg = gc_map[bank];
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ if (!rg)
-+ return;
-+
-+ rise = mtk_gpio_r32(rg, GPIO_REG_REDGE);
-+ fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ mtk_gpio_w32(rg, GPIO_REG_REDGE, rise | (BIT(d->hwirq) & rg->rising));
-+ mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall | (BIT(d->hwirq) & rg->falling));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static void
-+mediatek_gpio_irq_mask(struct irq_data *d)
-+{
-+ int pin = d->hwirq;
-+ int bank = pin / 32;
-+ struct mtk_gc *rg = gc_map[bank];
-+ unsigned long flags;
-+ u32 rise, fall;
-+
-+ if (!rg)
-+ return;
-+
-+ rise = mtk_gpio_r32(rg, GPIO_REG_REDGE);
-+ fall = mtk_gpio_r32(rg, GPIO_REG_FEDGE);
-+
-+ spin_lock_irqsave(&rg->lock, flags);
-+ mtk_gpio_w32(rg, GPIO_REG_FEDGE, fall & ~BIT(d->hwirq));
-+ mtk_gpio_w32(rg, GPIO_REG_REDGE, rise & ~BIT(d->hwirq));
-+ spin_unlock_irqrestore(&rg->lock, flags);
-+}
-+
-+static int
-+mediatek_gpio_irq_type(struct irq_data *d, unsigned int type)
-+{
-+ int pin = d->hwirq;
-+ int bank = pin / 32;
-+ struct mtk_gc *rg = gc_map[bank];
-+ u32 mask = BIT(d->hwirq);
-+
-+ if (!rg)
-+ return -1;
-+
-+ if (type == IRQ_TYPE_PROBE) {
-+ if ((rg->rising | rg->falling) & mask)
-+ return 0;
-+
-+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-+ }
-+
-+ if (type & IRQ_TYPE_EDGE_RISING)
-+ rg->rising |= mask;
-+ else
-+ rg->rising &= ~mask;
-+
-+ if (type & IRQ_TYPE_EDGE_FALLING)
-+ rg->falling |= mask;
-+ else
-+ rg->falling &= ~mask;
-+
-+ return 0;
-+}
-+
-+static struct irq_chip mediatek_gpio_irq_chip = {
-+ .name = "GPIO",
-+ .irq_unmask = mediatek_gpio_irq_unmask,
-+ .irq_mask = mediatek_gpio_irq_mask,
-+ .irq_mask_ack = mediatek_gpio_irq_mask,
-+ .irq_set_type = mediatek_gpio_irq_type,
-+};
-+
-+static int
-+mediatek_gpio_gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ irq_set_chip_and_handler(irq, &mediatek_gpio_irq_chip, handle_level_irq);
-+ irq_set_handler_data(irq, d);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = mediatek_gpio_gpio_map,
-+};
-+
-+static int
-+mediatek_gpio_probe(struct platform_device *pdev)
-+{
-+ struct device_node *bank, *np = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ mediatek_gpio_membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(mediatek_gpio_membase))
-+ return PTR_ERR(mediatek_gpio_membase);
-+
-+ mediatek_gpio_irq = irq_of_parse_and_map(np, 0);
-+ if (mediatek_gpio_irq) {
-+ mediatek_gpio_irq_domain = irq_domain_add_linear(np,
-+ MTK_MAX_BANK * MTK_BANK_WIDTH,
-+ &irq_domain_ops, NULL);
-+ if (!mediatek_gpio_irq_domain)
-+ dev_err(&pdev->dev, "irq_domain_add_linear failed\n");
-+ }
-+
-+ for_each_child_of_node(np, bank)
-+ if (of_device_is_compatible(bank, "mtk,mt7621-gpio-bank"))
-+ mediatek_gpio_bank_probe(pdev, bank);
-+
-+ if (mediatek_gpio_irq_domain)
-+ irq_set_chained_handler(mediatek_gpio_irq, mediatek_gpio_irq_handler);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mediatek_gpio_match[] = {
-+ { .compatible = "mtk,mt7621-gpio" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mediatek_gpio_match);
-+
-+static struct platform_driver mediatek_gpio_driver = {
-+ .probe = mediatek_gpio_probe,
-+ .driver = {
-+ .name = "mt7621_gpio",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mediatek_gpio_match,
-+ },
-+};
-+
-+static int __init
-+mediatek_gpio_init(void)
-+{
-+ return platform_driver_register(&mediatek_gpio_driver);
-+}
-+
-+subsys_initcall(mediatek_gpio_init);
diff --git a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
deleted file mode 100644
index 30db4ab326..0000000000
--- a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
+++ /dev/null
@@ -1,293 +0,0 @@
-From b00b5eafa7e8d059bd0ce844e66f648916953270 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 3 Jan 2016 19:11:22 +0100
-Subject: [PATCH 2/3] phy: ralink-usb: add driver for Mediatek/Ralink
-
-Add a driver to setup the USB phy on Mediatek/Ralink SoCs.
-The driver is trivial and only sets up power and host mode.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/phy/ralink-usb-phy.txt | 17 ++
- drivers/phy/Kconfig | 8 +
- drivers/phy/Makefile | 1 +
- drivers/phy/phy-ralink-usb.c | 171 ++++++++++++++++++++
- 4 files changed, 197 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
- create mode 100644 drivers/phy/phy-ralink-usb.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
-@@ -0,0 +1,17 @@
-+Mediatek/Ralink USB PHY
-+
-+Required properties:
-+ - compatible: ralink,rt3352-usbphy or mediatek,mt7620-usbphy
-+ - #phy-cells: should be 0
-+ - resets: the two reset controllers for host and device
-+ - reset-names: the names of the 2 reset controllers
-+
-+Example:
-+
-+usbphy: phy {
-+ compatible = "mediatek,mt7620-usbphy";
-+ #phy-cells = <0>;
-+
-+ resets = <&rstctrl 22 &rstctrl 25>;
-+ reset-names = "host", "device";
-+};
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -331,6 +331,14 @@
- help
- This option enables support for APM X-Gene SoC multi-purpose PHY.
-
-+config PHY_RALINK_USB
-+ tristate "Ralink USB PHY driver"
-+ select GENERIC_PHY
-+ depends on RALINK
-+ help
-+ This option enables support for the Ralink USB PHY found inside
-+ RT3352 and MT7620.
-+
- config PHY_STIH407_USB
- tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
- depends on RESET_CONTROLLER
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -46,3 +46,4 @@
- obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
- obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
- obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
-+obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o
---- /dev/null
-+++ b/drivers/phy/phy-ralink-usb.c
-@@ -0,0 +1,228 @@
-+/*
-+ * Allwinner ralink USB phy driver
-+ *
-+ * Copyright (C) 2016 John Crispin <blogic@openwrt.org>
-+ *
-+ * Based on code from
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+#include <linux/of_platform.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define RT_SYSC_REG_SYSCFG1 0x014
-+#define RT_SYSC_REG_CLKCFG1 0x030
-+#define RT_SYSC_REG_USB_PHY_CFG 0x05c
-+
-+#define OFS_U2_PHY_AC0 0x00
-+#define OFS_U2_PHY_AC1 0x04
-+#define OFS_U2_PHY_AC2 0x08
-+#define OFS_U2_PHY_ACR0 0x10
-+#define OFS_U2_PHY_ACR1 0x14
-+#define OFS_U2_PHY_ACR2 0x18
-+#define OFS_U2_PHY_ACR3 0x1C
-+#define OFS_U2_PHY_ACR4 0x20
-+#define OFS_U2_PHY_AMON0 0x24
-+#define OFS_U2_PHY_DCR0 0x60
-+#define OFS_U2_PHY_DCR1 0x64
-+#define OFS_U2_PHY_DTM0 0x68
-+#define OFS_U2_PHY_DTM1 0x6C
-+
-+#define RT_RSTCTRL_UDEV BIT(25)
-+#define RT_RSTCTRL_UHST BIT(22)
-+#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
-+
-+#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
-+#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
-+#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
-+#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
-+
-+#define USB_PHY_UTMI_8B60M BIT(1)
-+#define UDEV_WAKEUP BIT(0)
-+
-+struct ralink_usb_phy {
-+ struct reset_control *rstdev;
-+ struct reset_control *rsthost;
-+ u32 clk;
-+ struct phy *phy;
-+ void __iomem *base;
-+};
-+
-+static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
-+{
-+ iowrite32(val, phy->base + reg);
-+}
-+
-+static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
-+{
-+ return ioread32(phy->base + reg);
-+}
-+
-+static void
-+u2_phy_init(struct ralink_usb_phy *phy)
-+{
-+ u2_phy_r32(phy, OFS_U2_PHY_AC2);
-+ u2_phy_r32(phy, OFS_U2_PHY_ACR0);
-+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-+
-+ u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
-+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-+ u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
-+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-+ u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
-+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-+ u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
-+ u2_phy_r32(phy, OFS_U2_PHY_DCR0);
-+ u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
-+ u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
-+ u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
-+ u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
-+}
-+
-+static int ralink_usb_phy_power_on(struct phy *_phy)
-+{
-+ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
-+ u32 t;
-+
-+ /* enable the phy */
-+ rt_sysc_m32(0, phy->clk, RT_SYSC_REG_CLKCFG1);
-+
-+ /* setup host mode */
-+ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
-+
-+ /* deassert the reset lines */
-+ reset_control_deassert(phy->rsthost);
-+ reset_control_deassert(phy->rstdev);
-+
-+ /*
-+ * The SDK kernel had a delay of 100ms. however on device
-+ * testing showed that 10ms is enough
-+ */
-+ mdelay(10);
-+
-+ if (!IS_ERR(phy->base))
-+ u2_phy_init(phy);
-+
-+ /* print some status info */
-+ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
-+ dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
-+ (t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
-+ if (t & USB_PHY_UTMI_8B60M)
-+ dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
-+ else
-+ dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
-+
-+ return 0;
-+}
-+
-+static int ralink_usb_phy_power_off(struct phy *_phy)
-+{
-+ struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ /* assert the reset lines */
-+ reset_control_assert(phy->rstdev);
-+ reset_control_assert(phy->rsthost);
-+
-+ /* disable the phy */
-+ rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1);
-+
-+ return 0;
-+}
-+
-+static struct phy_ops ralink_usb_phy_ops = {
-+ .power_on = ralink_usb_phy_power_on,
-+ .power_off = ralink_usb_phy_power_off,
-+ .owner = THIS_MODULE,
-+};
-+
-+static const struct of_device_id ralink_usb_phy_of_match[] = {
-+ {
-+ .compatible = "ralink,rt3352-usbphy",
-+ .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN |
-+ RT_CLKCFG1_UPHY0_CLK_EN)
-+ },
-+ {
-+ .compatible = "mediatek,mt7620-usbphy",
-+ .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN |
-+ MT7620_CLKCFG1_UPHY0_CLK_EN) },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
-+
-+static int ralink_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct device *dev = &pdev->dev;
-+ struct phy_provider *phy_provider;
-+ const struct of_device_id *match;
-+ struct ralink_usb_phy *phy;
-+
-+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
-+ if (!phy)
-+ return -ENOMEM;
-+
-+ match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
-+ if (!match)
-+ return -ENODEV;
-+
-+ phy->clk = (int) match->data;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ phy->base = devm_ioremap_resource(&pdev->dev, res);
-+
-+ phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
-+ if (IS_ERR(phy->rsthost)) {
-+ dev_err(dev, "host reset is missing\n");
-+ return PTR_ERR(phy->rsthost);
-+ }
-+
-+ phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
-+ if (IS_ERR(phy->rstdev)) {
-+ dev_err(dev, "device reset is missing\n");
-+ return PTR_ERR(phy->rstdev);
-+ }
-+
-+ phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
-+ if (IS_ERR(phy->phy)) {
-+ dev_err(dev, "failed to create PHY\n");
-+ return PTR_ERR(phy->phy);
-+ }
-+ phy_set_drvdata(phy->phy, phy);
-+
-+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static struct platform_driver ralink_usb_phy_driver = {
-+ .probe = ralink_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ralink_usb_phy_of_match,
-+ .name = "ralink-usb-phy",
-+ }
-+};
-+module_platform_driver(ralink_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("Ralink USB phy driver");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch
deleted file mode 100644
index 1a805da572..0000000000
--- a/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch
+++ /dev/null
@@ -1,246 +0,0 @@
-From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 19 Sep 2013 01:50:59 +0200
-Subject: [PATCH 31/53] uvc: add iPassion iP2970 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/media/usb/uvc/uvc_driver.c | 12 +++
- drivers/media/usb/uvc/uvc_status.c | 2 +
- drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
- drivers/media/usb/uvc/uvcvideo.h | 5 +-
- 4 files changed, 165 insertions(+), 1 deletion(-)
-
---- a/drivers/media/usb/uvc/uvc_driver.c
-+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2536,6 +2536,18 @@ static struct usb_device_id uvc_ids[] =
- .bInterfaceSubClass = 1,
- .bInterfaceProtocol = 0,
- .driver_info = UVC_QUIRK_FORCE_Y8 },
-+ /* iPassion iP2970 */
-+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
-+ | USB_DEVICE_ID_MATCH_INT_INFO,
-+ .idVendor = 0x1B3B,
-+ .idProduct = 0x2970,
-+ .bInterfaceClass = USB_CLASS_VIDEO,
-+ .bInterfaceSubClass = 1,
-+ .bInterfaceProtocol = 0,
-+ .driver_info = UVC_QUIRK_PROBE_MINMAX
-+ | UVC_QUIRK_STREAM_NO_FID
-+ | UVC_QUIRK_MOTION
-+ | UVC_QUIRK_SINGLE_ISO },
- /* Generic USB Video Class */
- { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
- {}
---- a/drivers/media/usb/uvc/uvc_status.c
-+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u
- switch (dev->status[0] & 0x0f) {
- case UVC_STATUS_TYPE_CONTROL:
- uvc_event_control(dev, dev->status, len);
-+ dev->motion = 1;
- break;
-
- case UVC_STATUS_TYPE_STREAMING:
-@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d
- }
-
- pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
-+ dev->motion = 0;
-
- /* For high-speed interrupt endpoints, the bInterval value is used as
- * an exponent of two. Some developers forgot about it.
---- a/drivers/media/usb/uvc/uvc_video.c
-+++ b/drivers/media/usb/uvc/uvc_video.c
-@@ -21,6 +21,11 @@
- #include <linux/wait.h>
- #include <linux/atomic.h>
- #include <asm/unaligned.h>
-+#include <linux/skbuff.h>
-+#include <linux/kobject.h>
-+#include <linux/netlink.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-
- #include <media/v4l2-common.h>
-
-@@ -1089,9 +1094,149 @@ static void uvc_video_decode_data(struct
- }
- }
-
-+struct bh_priv {
-+ unsigned long seen;
-+};
-+
-+struct bh_event {
-+ const char *name;
-+ struct sk_buff *skb;
-+ struct work_struct work;
-+};
-+
-+#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args )
-+#define BH_DBG(fmt, args...) do {} while (0)
-+#define BH_SKB_SIZE 2048
-+
-+extern u64 uevent_next_seqnum(void);
-+static int seen = 0;
-+
-+static int bh_event_add_var(struct bh_event *event, int argv,
-+ const char *format, ...)
-+{
-+ static char buf[128];
-+ char *s;
-+ va_list args;
-+ int len;
-+
-+ if (argv)
-+ return 0;
-+
-+ va_start(args, format);
-+ len = vsnprintf(buf, sizeof(buf), format, args);
-+ va_end(args);
-+
-+ if (len >= sizeof(buf)) {
-+ BH_ERR("buffer size too small\n");
-+ WARN_ON(1);
-+ return -ENOMEM;
-+ }
-+
-+ s = skb_put(event->skb, len + 1);
-+ strcpy(s, buf);
-+
-+ BH_DBG("added variable '%s'\n", s);
-+
-+ return 0;
-+}
-+
-+static int motion_hotplug_fill_event(struct bh_event *event)
-+{
-+ int s = jiffies;
-+ int ret;
-+
-+ if (!seen)
-+ seen = jiffies;
-+
-+ ret = bh_event_add_var(event, 0, "HOME=%s", "/");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "PATH=%s",
-+ "/sbin:/bin:/usr/sbin:/usr/bin");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "ACTION=motion");
-+ if (ret)
-+ return ret;
-+
-+ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen);
-+ if (ret)
-+ return ret;
-+ seen = s;
-+
-+ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum());
-+
-+ return ret;
-+}
-+
-+static void motion_hotplug_work(struct work_struct *work)
-+{
-+ struct bh_event *event = container_of(work, struct bh_event, work);
-+ int ret = 0;
-+
-+ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL);
-+ if (!event->skb)
-+ goto out_free_event;
-+
-+ ret = bh_event_add_var(event, 0, "%s@", "add");
-+ if (ret)
-+ goto out_free_skb;
-+
-+ ret = motion_hotplug_fill_event(event);
-+ if (ret)
-+ goto out_free_skb;
-+
-+ NETLINK_CB(event->skb).dst_group = 1;
-+ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
-+
-+out_free_skb:
-+ if (ret) {
-+ BH_ERR("work error %d\n", ret);
-+ kfree_skb(event->skb);
-+ }
-+out_free_event:
-+ kfree(event);
-+}
-+
-+static int motion_hotplug_create_event(void)
-+{
-+ struct bh_event *event;
-+
-+ event = kzalloc(sizeof(*event), GFP_KERNEL);
-+ if (!event)
-+ return -ENOMEM;
-+
-+ event->name = "motion";
-+
-+ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work);
-+ schedule_work(&event->work);
-+
-+ return 0;
-+}
-+
-+#define MOTION_FLAG_OFFSET 4
- static void uvc_video_decode_end(struct uvc_streaming *stream,
- struct uvc_buffer *buf, const __u8 *data, int len)
- {
-+ if ((stream->dev->quirks & UVC_QUIRK_MOTION) &&
-+ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) {
-+ u8 *mem;
-+ buf->state = UVC_BUF_STATE_READY;
-+ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET);
-+ if ( stream->dev->motion ) {
-+ stream->dev->motion = 0;
-+ motion_hotplug_create_event();
-+ } else {
-+ *mem &= 0x7f;
-+ }
-+ }
-+
- /* Mark the buffer as done if the EOF marker is set. */
- if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
- uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1504,6 +1649,8 @@ static int uvc_init_video_isoc(struct uv
- if (npackets == 0)
- return -ENOMEM;
-
-+ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO)
-+ npackets = 1;
- size = npackets * psize;
-
- for (i = 0; i < UVC_URBS; ++i) {
---- a/drivers/media/usb/uvc/uvcvideo.h
-+++ b/drivers/media/usb/uvc/uvcvideo.h
-@@ -152,7 +152,9 @@
- #define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
- #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
- #define UVC_QUIRK_FORCE_Y8 0x00000800
--
-+#define UVC_QUIRK_MOTION 0x00001000
-+#define UVC_QUIRK_SINGLE_ISO 0x00002000
-+
- /* Format flags */
- #define UVC_FMT_FLAG_COMPRESSED 0x00000001
- #define UVC_FMT_FLAG_STREAM 0x00000002
-@@ -550,6 +552,7 @@ struct uvc_device {
- __u8 *status;
- struct input_dev *input;
- char input_phys[64];
-+ int motion;
- };
-
- enum uvc_handle_state {
diff --git a/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch b/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch
deleted file mode 100644
index 2927895498..0000000000
--- a/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From a758e0870c6d1e4b0272f6e7f9efa9face5534bb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:49:07 +0100
-Subject: [PATCH 32/53] USB: dwc2: add device_reset()
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/usb/dwc2/hcd.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/usb/dwc2/hcd.c
-+++ b/drivers/usb/dwc2/hcd.c
-@@ -47,6 +47,7 @@
- #include <linux/io.h>
- #include <linux/slab.h>
- #include <linux/usb.h>
-+#include <linux/reset.h>
-
- #include <linux/usb/hcd.h>
- #include <linux/usb/ch11.h>
-@@ -2841,6 +2842,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
-
- retval = -ENOMEM;
-
-+ device_reset(hsotg->dev);
-+
- hcfg = readl(hsotg->regs + HCFG);
- dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
-
diff --git a/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch
deleted file mode 100644
index d0acad3ef6..0000000000
--- a/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch
+++ /dev/null
@@ -1,5748 +0,0 @@
-From 71fbde37e60c11f5a715c105d25b9c6cee8dae6c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:14:03 +0100
-Subject: [PATCH 33/53] USB: add xhci hooks
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/usb/core/hcd-pci.c | 5 +
- drivers/usb/core/hub.c | 2 +-
- drivers/usb/core/port.c | 10 +-
- drivers/usb/host/Kconfig | 9 +-
- drivers/usb/host/Makefile | 10 +-
- drivers/usb/host/mtk-phy-7621.c | 445 +++++
- drivers/usb/host/mtk-phy-7621.h | 2871 +++++++++++++++++++++++++++++++++
- drivers/usb/host/mtk-phy-ahb.c | 58 +
- drivers/usb/host/mtk-phy.c | 102 ++
- drivers/usb/host/mtk-phy.h | 179 ++
- drivers/usb/host/pci-quirks.h | 2 +-
- drivers/usb/host/xhci-dbg.c | 3 +
- drivers/usb/host/xhci-mem.c | 11 +
- drivers/usb/host/xhci-mtk-power.c | 115 ++
- drivers/usb/host/xhci-mtk-power.h | 13 +
- drivers/usb/host/xhci-mtk-scheduler.c | 608 +++++++
- drivers/usb/host/xhci-mtk-scheduler.h | 77 +
- drivers/usb/host/xhci-mtk.c | 265 +++
- drivers/usb/host/xhci-mtk.h | 120 ++
- drivers/usb/host/xhci-plat.c | 11 +
- drivers/usb/host/xhci-ring.c | 104 ++
- drivers/usb/host/xhci.c | 209 ++-
- drivers/usb/host/xhci.h | 39 +
- 23 files changed, 5257 insertions(+), 11 deletions(-)
- create mode 100644 drivers/usb/host/mtk-phy-7621.c
- create mode 100644 drivers/usb/host/mtk-phy-7621.h
- create mode 100644 drivers/usb/host/mtk-phy-ahb.c
- create mode 100644 drivers/usb/host/mtk-phy.c
- create mode 100644 drivers/usb/host/mtk-phy.h
- create mode 100644 drivers/usb/host/xhci-mtk-power.c
- create mode 100644 drivers/usb/host/xhci-mtk-power.h
- create mode 100644 drivers/usb/host/xhci-mtk-scheduler.c
- create mode 100644 drivers/usb/host/xhci-mtk-scheduler.h
- create mode 100644 drivers/usb/host/xhci-mtk.c
- create mode 100644 drivers/usb/host/xhci-mtk.h
-
---- a/drivers/usb/core/hcd-pci.c
-+++ b/drivers/usb/core/hcd-pci.c
-@@ -214,8 +214,13 @@ int usb_hcd_pci_probe(struct pci_dev *de
- goto disable_pci;
- }
-
-+
-+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
-+ hcd->amd_resume_bug = 0;
-+#else
- hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
- driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
-+#endif
-
- if (driver->flags & HCD_MEMORY) {
- /* EHCI, OHCI */
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -1291,7 +1291,7 @@ static void hub_quiesce(struct usb_hub *
- if (type != HUB_SUSPEND) {
- /* Disconnect all the children */
- for (i = 0; i < hdev->maxchild; ++i) {
-- if (hub->ports[i]->child)
-+ if (hub->ports[i] && hub->ports[i]->child)
- usb_disconnect(&hub->ports[i]->child);
- }
- }
---- a/drivers/usb/core/port.c
-+++ b/drivers/usb/core/port.c
-@@ -480,8 +480,10 @@ void usb_hub_remove_port_device(struct u
- struct usb_port *port_dev = hub->ports[port1 - 1];
- struct usb_port *peer;
-
-- peer = port_dev->peer;
-- if (peer)
-- unlink_peers(port_dev, peer);
-- device_unregister(&port_dev->dev);
-+ if(port_dev) {
-+ peer = port_dev->peer;
-+ if (peer)
-+ unlink_peers(port_dev, peer);
-+ device_unregister(&port_dev->dev);
-+ }
- }
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -41,6 +41,13 @@ config USB_XHCI_PLATFORM
-
- If unsure, say N.
-
-+config USB_MT7621_XHCI_PLATFORM
-+ bool
-+ depends on USB_XHCI_PLATFORM
-+ depends on SOC_MT7621
-+ select USB_PHY
-+ default y
-+
- config USB_XHCI_MVEBU
- tristate "xHCI support for Marvell Armada 375/38x"
- select USB_XHCI_PLATFORM
-@@ -590,7 +597,7 @@ endif # USB_OHCI_HCD
-
- config USB_UHCI_HCD
- tristate "UHCI HCD (most Intel and VIA) support"
-- depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
-+ depends on BROKEN && (PCI || USB_UHCI_SUPPORT_NON_PCI_HC)
- ---help---
- The Universal Host Controller Interface is a standard by Intel for
- accessing the USB hardware in the PC (which is also called the USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -14,7 +14,12 @@ xhci-hcd-y := xhci.o xhci-mem.o
- xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
- xhci-hcd-y += xhci-trace.o
-
-+ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
-+xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
-+endif
-+
- xhci-plat-hcd-y := xhci-plat.o
-+
- ifneq ($(CONFIG_USB_XHCI_MVEBU), )
- xhci-plat-hcd-y += xhci-mvebu.o
- endif
-@@ -24,11 +29,10 @@ endif
-
- obj-$(CONFIG_USB_WHCI_HCD) += whci/
-
--ifneq ($(CONFIG_USB), )
-+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
- obj-$(CONFIG_PCI) += pci-quirks.o
-+ obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
- endif
--
--obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
- obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
-
- obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy-7621.c
-@@ -0,0 +1,445 @@
-+#include "mtk-phy.h"
-+
-+#ifdef CONFIG_PROJECT_7621
-+#include "mtk-phy-7621.h"
-+
-+//not used on SoC
-+PHY_INT32 phy_init(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
-+ return PHY_TRUE;
-+}
-+
-+//--------------------------------------------------------
-+// Function : fgEyeScanHelper_CheckPtInRegion()
-+// Description : Check if the test point is in a rectangle region.
-+// If it is in the rectangle, also check if this point
-+// is on the multiple of deltaX and deltaY.
-+// Parameter : strucScanRegion * prEye - the region
-+// BYTE bX
-+// BYTE bY
-+// Return : BYTE - TRUE : This point needs to be tested
-+// FALSE: This point will be omitted
-+// Note : First check within the rectangle.
-+// Secondly, use modulous to check if the point will be tested.
-+//--------------------------------------------------------
-+static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
-+{
-+ PHY_INT8 fgValid = true;
-+
-+
-+ /// Be careful, the axis origin is on the TOP-LEFT corner.
-+ /// Therefore the top-left point has the minimum X and Y
-+ /// Botton-right point is the maximum X and Y
-+ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
-+ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
-+ {
-+ // With the region, now check whether or not the input test point is
-+ // on the multiples of X and Y
-+ // Do not have to worry about negative value, because we have already
-+ // check the input bX, and bY is within the region.
-+ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
-+ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
-+ {
-+ // if the division will have remainder, that means
-+ // the input test point is on the multiples of X and Y
-+ fgValid = false;
-+ }
-+ else
-+ {
-+ }
-+ }
-+ else
-+ {
-+
-+ fgValid = false;
-+ }
-+ return fgValid;
-+}
-+
-+//--------------------------------------------------------
-+// Function : EyeScanHelper_RunTest()
-+// Description : Enable the test, and wait til it is completed
-+// Parameter : None
-+// Return : None
-+// Note : None
-+//--------------------------------------------------------
-+static void EyeScanHelper_RunTest(struct u3phy_info *info)
-+{
-+ DRV_UDELAY(100);
-+ // Disable the test
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0
-+ DRV_UDELAY(100);
-+ // Run the test
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1
-+ DRV_UDELAY(100);
-+ // Wait til it's done
-+ //RGS_SSUSB_RX_EYE_CNT_RDY
-+ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
-+ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
-+}
-+
-+//--------------------------------------------------------
-+// Function : fgEyeScanHelper_CalNextPoint()
-+// Description : Calcualte the test point for the measurement
-+// Parameter : None
-+// Return : BOOL - TRUE : the next point is within the
-+// boundaryof HW limit
-+// FALSE: the next point is out of the HW limit
-+// Note : The next point is obtained by calculating
-+// from the bottom left of the region rectangle
-+// and then scanning up until it reaches the upper
-+// limit. At this time, the x will increment, and
-+// start scanning downwards until the y hits the
-+// zero.
-+//--------------------------------------------------------
-+static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
-+{
-+ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
-+ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
-+ )
-+ {
-+ /// Reaches the limit of Y axis
-+ /// Increment X
-+ _bXcurr++;
-+ _fgXChged = true;
-+ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;
-+
-+ if (_bXcurr > MAX_X)
-+ {
-+ return false;
-+ }
-+ }
-+ else
-+ {
-+ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
-+ _fgXChged = false;
-+ }
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 eyescan_init(struct u3phy_info *info){
-+ //initial PHY setting
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
-+ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
-+ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
-+ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
-+ PHY_INT32 cOfst = 0;
-+ PHY_UINT8 bIdxX = 0;
-+ PHY_UINT8 bIdxY = 0;
-+ //PHY_INT8 bCnt = 0;
-+ PHY_UINT8 bIdxCycCnt = 0;
-+ PHY_INT8 fgValid;
-+ PHY_INT8 cX;
-+ PHY_INT8 cY;
-+ PHY_UINT8 bExtendCnt;
-+ PHY_INT8 isContinue;
-+ //PHY_INT8 isBreak;
-+ PHY_UINT32 wErr0 = 0, wErr1 = 0;
-+ //PHY_UINT32 temp;
-+
-+ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+
-+ _rEye1.bX_tl = x_t1;
-+ _rEye1.bY_tl = y_t1;
-+ _rEye1.bX_br = x_br;
-+ _rEye1.bY_br = y_br;
-+ _rEye1.bDeltaX = delta_x;
-+ _rEye1.bDeltaY = delta_y;
-+
-+ _rEye2.bX_tl = x_t1;
-+ _rEye2.bY_tl = y_t1;
-+ _rEye2.bX_br = x_br;
-+ _rEye2.bY_br = y_br;
-+ _rEye2.bDeltaX = delta_x;
-+ _rEye2.bDeltaY = delta_y;
-+
-+ _rTestCycle.wEyeCnt = eye_cnt;
-+ _rTestCycle.bNumOfEyeCnt = num_cnt;
-+ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
-+ _rTestCycle.bPICalEn = PI_cal_en;
-+
-+ _bXcurr = 0;
-+ _bYcurr = 0;
-+ _eScanDir = SCAN_DN;
-+ _fgXChged = false;
-+
-+ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
-+ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
-+ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);
-+
-+ //force SIGDET to OFF
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
-+ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0
-+
-+ // RX_TRI_DET_EN to Disable
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
-+ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0
-+
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0
-+
-+
-+ if (PI_cal_en){
-+ // PI Calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
-+
-+ DRV_UDELAY(20);
-+
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
-+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
-+ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
-+ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO
-+
-+ printk(KERN_ERR "PI result: %d\n", _bPIResult);
-+ }
-+ // Read Initial DAC
-+ // Set CYCLE
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
-+ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT
-+
-+ // Eye Monitor Feature
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
-+ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
-+
-+ // Move X,Y to the top-left corner
-+ for (cOfst = 0; cOfst >= -64; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ for (cOfst = 0; cOfst < 64; cOfst++)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y
-+ }
-+ //ClearErrorResult
-+ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
-+ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
-+ {
-+ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
-+ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
-+ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
-+ }
-+ }
-+ }
-+ isContinue = true;
-+ while(isContinue){
-+ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
-+ // The point is within the boundary, then let's check if it is within
-+ // the testing region.
-+ // The point is only test-able if one of the eye region
-+ // includes this point.
-+ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
-+ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
-+ // Translate bX and bY to 2's complement from where the origin was on the
-+ // top left corner.
-+ // 0x40 and 0x3F needs a bit of thinking!!!! >"<
-+ cX = (_bXcurr ^ 0x40);
-+ cY = (_bYcurr ^ 0x3F);
-+
-+ // Set X if necessary
-+ if (_fgXChged == true)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ // Set Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y
-+
-+ /// Test this point!
-+ if (fgValid){
-+ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
-+ {
-+ //run test
-+ EyeScanHelper_RunTest(info);
-+ }
-+ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
-+ {
-+ EyeScanHelper_RunTest(info);
-+ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
-+ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
-+ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
-+ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);
-+
-+ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
-+ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;
-+
-+ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
-+// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
-+// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
-+ }
-+ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
-+ }
-+ else{
-+
-+ }
-+ if (fgEyeScanHelper_CalNextPoint() == false){
-+#if 0
-+ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
-+ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
-+#endif
-+ printk(KERN_ERR "end of eye scan\n");
-+ isContinue = false;
-+ }
-+ }
-+ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
-+
-+ // Move X,Y to the top-left corner
-+ for (cOfst = 63; cOfst >= 0; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
-+ }
-+ for (cOfst = 63; cOfst >= 0; cOfst--)
-+ {
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
-+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);
-+
-+ }
-+ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
-+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
-+
-+ printk(KERN_ERR "PI result: %d\n", _bPIResult);
-+ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
-+ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
-+
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+//not used on SoC
-+PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
-+ PHY_INT32 i=0;
-+ //PHY_INT32 j=0;
-+ //PHY_INT8 u1SrCalVal = 0;
-+ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
-+ PHY_INT32 fgRet = 0;
-+ PHY_INT32 u4FmOut = 0;
-+ PHY_INT32 u4Tmp = 0;
-+ //PHY_INT32 temp;
-+
-+ // => RG_USB20_HSTX_SRCAL_EN = 1
-+ // enable HS TX SR calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
-+ DRV_MSLEEP(1);
-+
-+ // => RG_FRCK_EN = 1
-+ // Enable free run clock
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
-+ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1);
-+
-+ // MT6290 HS signal quality patch
-+ // => RG_CYCLECNT = 400
-+ // Setting cyclecnt =400
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);
-+
-+ // => RG_FREQDET_EN = 1
-+ // Enable frequency meter
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);
-+
-+ // wait for FM detection done, set 10ms timeout
-+ for(i=0; i<10; i++){
-+ // => u4FmOut = USB_FM_OUT
-+ // read FM_OUT
-+ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
-+ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);
-+
-+ // check if FM detection done
-+ if (u4FmOut != 0)
-+ {
-+ fgRet = 0;
-+ printk("FM detection done! loop = %d\n", i);
-+
-+ break;
-+ }
-+
-+ fgRet = 1;
-+ DRV_MSLEEP(1);
-+ }
-+ // => RG_FREQDET_EN = 0
-+ // disable frequency meter
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
-+ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);
-+
-+ // => RG_FRCK_EN = 0
-+ // disable free run clock
-+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
-+ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0);
-+
-+ // => RG_USB20_HSTX_SRCAL_EN = 0
-+ // disable HS TX SR calibration
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
-+ DRV_MSLEEP(1);
-+
-+ if(u4FmOut == 0){
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
-+
-+ fgRet = 1;
-+ }
-+ else{
-+ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
-+ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
-+ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
-+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
-+ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
-+ }
-+ return fgRet;
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy-7621.h
-@@ -0,0 +1,2871 @@
-+#ifdef CONFIG_PROJECT_7621
-+#ifndef __MTK_PHY_7621_H
-+#define __MTK_PHY_7621_H
-+
-+#define U2_SR_COEF_7621 28
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u2phy_reg {
-+ //0x0
-+ PHY_LE32 u2phyac0;
-+ PHY_LE32 u2phyac1;
-+ PHY_LE32 u2phyac2;
-+ PHY_LE32 reserve0;
-+ //0x10
-+ PHY_LE32 u2phyacr0;
-+ PHY_LE32 u2phyacr1;
-+ PHY_LE32 u2phyacr2;
-+ PHY_LE32 u2phyacr3;
-+ //0x20
-+ PHY_LE32 u2phyacr4;
-+ PHY_LE32 u2phyamon0;
-+ PHY_LE32 reserve1[2];
-+ //0x30~0x50
-+ PHY_LE32 reserve2[12];
-+ //0x60
-+ PHY_LE32 u2phydcr0;
-+ PHY_LE32 u2phydcr1;
-+ PHY_LE32 u2phydtm0;
-+ PHY_LE32 u2phydtm1;
-+ //0x70
-+ PHY_LE32 u2phydmon0;
-+ PHY_LE32 u2phydmon1;
-+ PHY_LE32 u2phydmon2;
-+ PHY_LE32 u2phydmon3;
-+ //0x80
-+ PHY_LE32 u2phybc12c;
-+ PHY_LE32 u2phybc12c1;
-+ PHY_LE32 reserve3[2];
-+ //0x90~0xe0
-+ PHY_LE32 reserve4[24];
-+ //0xf0
-+ PHY_LE32 reserve6[3];
-+ PHY_LE32 regfcom;
-+};
-+
-+//U3D_U2PHYAC0
-+#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28
-+#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26
-+#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24
-+#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23
-+#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16
-+#define RG_USB20_REF_EN (0x1<<15) //15:15
-+#define RG_USB20_INTR_EN (0x1<<14) //14:14
-+#define RG_USB20_BG_TRIM (0xf<<8) //11:8
-+#define RG_USB20_BG_RBSEL (0x3<<6) //7:6
-+#define RG_USB20_BG_RASEL (0x3<<4) //5:4
-+#define RG_USB20_BGR_DIV (0x3<<2) //3:2
-+#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1
-+#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0
-+
-+//U3D_U2PHYAC1
-+#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28
-+#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24
-+#define RG_USB20_MPX_SEL (0xff<<16) //23:16
-+#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12
-+#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8
-+#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3
-+#define RG_USB20_USBPLL_LF (0x1<<2) //2:2
-+#define RG_USB20_USBPLL_BR (0x1<<1) //1:1
-+#define RG_USB20_USBPLL_BP (0x1<<0) //0:0
-+
-+//U3D_U2PHYAC2
-+#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17
-+#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16
-+#define RG_USB20_CLKREF_REV (0xff<<0) //7:0
-+
-+//U3D_U2PHYACR0
-+#define RG_USB20_ICUSB_EN (0x1<<24) //24:24
-+#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23
-+#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16
-+#define RG_USB20_LS_CR (0x7<<12) //14:12
-+#define RG_USB20_FS_CR (0x7<<8) //10:8
-+#define RG_USB20_LS_SR (0x7<<4) //6:4
-+#define RG_USB20_FS_SR (0x7<<0) //2:0
-+
-+//U3D_U2PHYACR1
-+#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28
-+#define RG_USB20_SQD (0x3<<24) //25:24
-+#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20
-+#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19
-+#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18
-+#define RG_USB20_INLPBK_EN (0x1<<17) //17:17
-+#define RG_USB20_CHIRP_EN (0x1<<16) //16:16
-+#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15
-+#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8
-+#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7
-+#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0
-+
-+//U3D_U2PHYACR2
-+#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29
-+#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28
-+#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27
-+#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24
-+#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22
-+#define RG_USB20_DISCD (0x3<<20) //21:20
-+#define RG_USB20_DISCTH (0xf<<16) //19:16
-+#define RG_USB20_SQCAL_EN (0x1<<15) //15:15
-+#define RG_USB20_SQCAL (0xf<<8) //11:8
-+#define RG_USB20_SQTH (0xf<<0) //3:0
-+
-+//U3D_U2PHYACR3
-+#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28
-+#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26
-+#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24
-+#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23
-+#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20
-+#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19
-+#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18
-+#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17
-+#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16
-+#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13
-+#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12
-+#define RG_USB20_EN_PU_DM (0x1<<11) //11:11
-+#define RG_USB20_EN_PD_DM (0x1<<10) //10:10
-+#define RG_USB20_EN_PU_DP (0x1<<9) //9:9
-+#define RG_USB20_EN_PD_DP (0x1<<8) //8:8
-+#define RG_USB20_PHY_REV (0xff<<0) //7:0
-+
-+//U3D_U2PHYACR4
-+#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18
-+#define RG_USB20_DM_100K_EN (0x1<<17) //17:17
-+#define USB20_DP_100K_EN (0x1<<16) //16:16
-+#define USB20_GPIO_DM_I (0x1<<15) //15:15
-+#define USB20_GPIO_DP_I (0x1<<14) //14:14
-+#define USB20_GPIO_DM_OE (0x1<<13) //13:13
-+#define USB20_GPIO_DP_OE (0x1<<12) //12:12
-+#define RG_USB20_GPIO_CTL (0x1<<9) //9:9
-+#define USB20_GPIO_MODE (0x1<<8) //8:8
-+#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5
-+#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4
-+#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2
-+#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0
-+
-+//U3D_U2PHYAMON0
-+#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1
-+#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0
-+
-+//U3D_U2PHYDCR0
-+#define RG_USB20_CDR_TST (0x3<<30) //31:30
-+#define RG_USB20_GATED_ENB (0x1<<29) //29:29
-+#define RG_USB20_TESTMODE (0x3<<26) //27:26
-+#define RG_USB20_PLL_STABLE (0x1<<25) //25:25
-+#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24
-+#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8
-+#define RG_USB20_EBTHRLD (0x1<<7) //7:7
-+#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6
-+#define RG_USB20_TX_TST (0x1<<5) //5:5
-+#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4
-+#define RG_USB20_CDR_FILT (0xf<<0) //3:0
-+
-+//U3D_U2PHYDCR1
-+#define RG_USB20_PROBE_SEL (0xff<<24) //31:24
-+#define RG_USB20_DRVVBUS (0x1<<23) //23:23
-+#define RG_DEBUG_EN (0x1<<22) //22:22
-+#define RG_USB20_OTG_PROBE (0x3<<20) //21:20
-+#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18
-+#define RG_USB20_BERTH (0x3<<16) //17:16
-+#define RG_USB20_LBMODE (0x3<<13) //14:13
-+#define RG_USB20_FORCE_TAP (0x1<<12) //12:12
-+#define RG_USB20_TAPSEL (0xfff<<0) //11:0
-+
-+//U3D_U2PHYDTM0
-+#define RG_UART_MODE (0x3<<30) //31:30
-+#define FORCE_UART_I (0x1<<29) //29:29
-+#define FORCE_UART_BIAS_EN (0x1<<28) //28:28
-+#define FORCE_UART_TX_OE (0x1<<27) //27:27
-+#define FORCE_UART_EN (0x1<<26) //26:26
-+#define FORCE_USB_CLKEN (0x1<<25) //25:25
-+#define FORCE_DRVVBUS (0x1<<24) //24:24
-+#define FORCE_DATAIN (0x1<<23) //23:23
-+#define FORCE_TXVALID (0x1<<22) //22:22
-+#define FORCE_DM_PULLDOWN (0x1<<21) //21:21
-+#define FORCE_DP_PULLDOWN (0x1<<20) //20:20
-+#define FORCE_XCVRSEL (0x1<<19) //19:19
-+#define FORCE_SUSPENDM (0x1<<18) //18:18
-+#define FORCE_TERMSEL (0x1<<17) //17:17
-+#define FORCE_OPMODE (0x1<<16) //16:16
-+#define UTMI_MUXSEL (0x1<<15) //15:15
-+#define RG_RESET (0x1<<14) //14:14
-+#define RG_DATAIN (0xf<<10) //13:10
-+#define RG_TXVALIDH (0x1<<9) //9:9
-+#define RG_TXVALID (0x1<<8) //8:8
-+#define RG_DMPULLDOWN (0x1<<7) //7:7
-+#define RG_DPPULLDOWN (0x1<<6) //6:6
-+#define RG_XCVRSEL (0x3<<4) //5:4
-+#define RG_SUSPENDM (0x1<<3) //3:3
-+#define RG_TERMSEL (0x1<<2) //2:2
-+#define RG_OPMODE (0x3<<0) //1:0
-+
-+//U3D_U2PHYDTM1
-+#define RG_USB20_PRBS7_EN (0x1<<31) //31:31
-+#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24
-+#define RG_USB20_CLK48M_EN (0x1<<23) //23:23
-+#define RG_USB20_CLK60M_EN (0x1<<22) //22:22
-+#define RG_UART_I (0x1<<19) //19:19
-+#define RG_UART_BIAS_EN (0x1<<18) //18:18
-+#define RG_UART_TX_OE (0x1<<17) //17:17
-+#define RG_UART_EN (0x1<<16) //16:16
-+#define FORCE_VBUSVALID (0x1<<13) //13:13
-+#define FORCE_SESSEND (0x1<<12) //12:12
-+#define FORCE_BVALID (0x1<<11) //11:11
-+#define FORCE_AVALID (0x1<<10) //10:10
-+#define FORCE_IDDIG (0x1<<9) //9:9
-+#define FORCE_IDPULLUP (0x1<<8) //8:8
-+#define RG_VBUSVALID (0x1<<5) //5:5
-+#define RG_SESSEND (0x1<<4) //4:4
-+#define RG_BVALID (0x1<<3) //3:3
-+#define RG_AVALID (0x1<<2) //2:2
-+#define RG_IDDIG (0x1<<1) //1:1
-+#define RG_IDPULLUP (0x1<<0) //0:0
-+
-+//U3D_U2PHYDMON0
-+#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0
-+
-+//U3D_U2PHYDMON1
-+#define USB20_UART_O (0x1<<31) //31:31
-+#define RGO_USB20_LB_PASS (0x1<<30) //30:30
-+#define RGO_USB20_LB_DONE (0x1<<29) //29:29
-+#define AD_USB20_BVALID (0x1<<28) //28:28
-+#define USB20_IDDIG (0x1<<27) //27:27
-+#define AD_USB20_VBUSVALID (0x1<<26) //26:26
-+#define AD_USB20_SESSEND (0x1<<25) //25:25
-+#define AD_USB20_AVALID (0x1<<24) //24:24
-+#define USB20_LINE_STATE (0x3<<22) //23:22
-+#define USB20_HST_DISCON (0x1<<21) //21:21
-+#define USB20_TX_READY (0x1<<20) //20:20
-+#define USB20_RX_ERROR (0x1<<19) //19:19
-+#define USB20_RX_ACTIVE (0x1<<18) //18:18
-+#define USB20_RX_VALIDH (0x1<<17) //17:17
-+#define USB20_RX_VALID (0x1<<16) //16:16
-+#define USB20_DATA_OUT (0xffff<<0) //15:0
-+
-+//U3D_U2PHYDMON2
-+#define RGO_TXVALID_CNT (0xff<<24) //31:24
-+#define RGO_RXACTIVE_CNT (0xff<<16) //23:16
-+#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8
-+#define USB20_PROBE_OUT (0xff<<0) //7:0
-+
-+//U3D_U2PHYDMON3
-+#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16
-+#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3
-+#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2
-+#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1
-+#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0
-+
-+//U3D_U2PHYBC12C
-+#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28
-+#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24
-+#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16
-+#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14
-+#define RG_CHGDT_VDATSRC (0x1<<13) //13:13
-+#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10
-+#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8
-+#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7
-+#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6
-+#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5
-+#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4
-+#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3
-+#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2
-+#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1
-+#define RG_CHGDT_EN (0x1<<0) //0:0
-+
-+//U3D_U2PHYBC12C1
-+#define RG_CHGDT_REV (0xff<<0) //7:0
-+
-+//U3D_REGFCOM
-+#define RG_PAGE (0xff<<24) //31:24
-+#define I2C_MODE (0x1<<16) //16:16
-+
-+
-+/* OFFSET */
-+
-+//U3D_U2PHYAC0
-+#define RG_USB20_USBPLL_DIVEN_OFST (28)
-+#define RG_USB20_USBPLL_CKCTRL_OFST (26)
-+#define RG_USB20_USBPLL_PREDIV_OFST (24)
-+#define RG_USB20_USBPLL_FORCE_ON_OFST (23)
-+#define RG_USB20_USBPLL_FBDIV_OFST (16)
-+#define RG_USB20_REF_EN_OFST (15)
-+#define RG_USB20_INTR_EN_OFST (14)
-+#define RG_USB20_BG_TRIM_OFST (8)
-+#define RG_USB20_BG_RBSEL_OFST (6)
-+#define RG_USB20_BG_RASEL_OFST (4)
-+#define RG_USB20_BGR_DIV_OFST (2)
-+#define RG_SIFSLV_CHP_EN_OFST (1)
-+#define RG_SIFSLV_BGR_EN_OFST (0)
-+
-+//U3D_U2PHYAC1
-+#define RG_USB20_VRT_VREF_SEL_OFST (28)
-+#define RG_USB20_TERM_VREF_SEL_OFST (24)
-+#define RG_USB20_MPX_SEL_OFST (16)
-+#define RG_USB20_MPX_OUT_SEL_OFST (12)
-+#define RG_USB20_TX_PH_ROT_SEL_OFST (8)
-+#define RG_USB20_USBPLL_ACCEN_OFST (3)
-+#define RG_USB20_USBPLL_LF_OFST (2)
-+#define RG_USB20_USBPLL_BR_OFST (1)
-+#define RG_USB20_USBPLL_BP_OFST (0)
-+
-+//U3D_U2PHYAC2
-+#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17)
-+#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16)
-+#define RG_USB20_CLKREF_REV_OFST (0)
-+
-+//U3D_U2PHYACR0
-+#define RG_USB20_ICUSB_EN_OFST (24)
-+#define RG_USB20_HSTX_SRCAL_EN_OFST (23)
-+#define RG_USB20_HSTX_SRCTRL_OFST (16)
-+#define RG_USB20_LS_CR_OFST (12)
-+#define RG_USB20_FS_CR_OFST (8)
-+#define RG_USB20_LS_SR_OFST (4)
-+#define RG_USB20_FS_SR_OFST (0)
-+
-+//U3D_U2PHYACR1
-+#define RG_USB20_INIT_SQ_EN_DG_OFST (28)
-+#define RG_USB20_SQD_OFST (24)
-+#define RG_USB20_HSTX_TMODE_SEL_OFST (20)
-+#define RG_USB20_HSTX_TMODE_EN_OFST (19)
-+#define RG_USB20_PHYD_MONEN_OFST (18)
-+#define RG_USB20_INLPBK_EN_OFST (17)
-+#define RG_USB20_CHIRP_EN_OFST (16)
-+#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15)
-+#define RG_USB20_DM_ABIST_SELE_OFST (8)
-+#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7)
-+#define RG_USB20_DP_ABIST_SELE_OFST (0)
-+
-+//U3D_U2PHYACR2
-+#define RG_USB20_OTG_ABIST_SELE_OFST (29)
-+#define RG_USB20_OTG_ABIST_EN_OFST (28)
-+#define RG_USB20_OTG_VBUSCMP_EN_OFST (27)
-+#define RG_USB20_OTG_VBUSTH_OFST (24)
-+#define RG_USB20_DISC_FIT_EN_OFST (22)
-+#define RG_USB20_DISCD_OFST (20)
-+#define RG_USB20_DISCTH_OFST (16)
-+#define RG_USB20_SQCAL_EN_OFST (15)
-+#define RG_USB20_SQCAL_OFST (8)
-+#define RG_USB20_SQTH_OFST (0)
-+
-+//U3D_U2PHYACR3
-+#define RG_USB20_HSTX_DBIST_OFST (28)
-+#define RG_USB20_HSTX_BIST_EN_OFST (26)
-+#define RG_USB20_HSTX_I_EN_MODE_OFST (24)
-+#define RG_USB20_HSRX_TMODE_EN_OFST (23)
-+#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20)
-+#define RG_USB20_USB11_TMODE_EN_OFST (19)
-+#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18)
-+#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17)
-+#define RG_USB20_TMODE_FS_LS_MODE_OFST (16)
-+#define RG_USB20_HS_TERM_EN_MODE_OFST (13)
-+#define RG_USB20_PUPD_BIST_EN_OFST (12)
-+#define RG_USB20_EN_PU_DM_OFST (11)
-+#define RG_USB20_EN_PD_DM_OFST (10)
-+#define RG_USB20_EN_PU_DP_OFST (9)
-+#define RG_USB20_EN_PD_DP_OFST (8)
-+#define RG_USB20_PHY_REV_OFST (0)
-+
-+//U3D_U2PHYACR4
-+#define RG_USB20_DP_100K_MODE_OFST (18)
-+#define RG_USB20_DM_100K_EN_OFST (17)
-+#define USB20_DP_100K_EN_OFST (16)
-+#define USB20_GPIO_DM_I_OFST (15)
-+#define USB20_GPIO_DP_I_OFST (14)
-+#define USB20_GPIO_DM_OE_OFST (13)
-+#define USB20_GPIO_DP_OE_OFST (12)
-+#define RG_USB20_GPIO_CTL_OFST (9)
-+#define USB20_GPIO_MODE_OFST (8)
-+#define RG_USB20_TX_BIAS_EN_OFST (5)
-+#define RG_USB20_TX_VCMPDN_EN_OFST (4)
-+#define RG_USB20_HS_SQ_EN_MODE_OFST (2)
-+#define RG_USB20_HS_RCV_EN_MODE_OFST (0)
-+
-+//U3D_U2PHYAMON0
-+#define RGO_USB20_GPIO_DM_O_OFST (1)
-+#define RGO_USB20_GPIO_DP_O_OFST (0)
-+
-+//U3D_U2PHYDCR0
-+#define RG_USB20_CDR_TST_OFST (30)
-+#define RG_USB20_GATED_ENB_OFST (29)
-+#define RG_USB20_TESTMODE_OFST (26)
-+#define RG_USB20_PLL_STABLE_OFST (25)
-+#define RG_USB20_PLL_FORCE_ON_OFST (24)
-+#define RG_USB20_PHYD_RESERVE_OFST (8)
-+#define RG_USB20_EBTHRLD_OFST (7)
-+#define RG_USB20_EARLY_HSTX_I_OFST (6)
-+#define RG_USB20_TX_TST_OFST (5)
-+#define RG_USB20_NEGEDGE_ENB_OFST (4)
-+#define RG_USB20_CDR_FILT_OFST (0)
-+
-+//U3D_U2PHYDCR1
-+#define RG_USB20_PROBE_SEL_OFST (24)
-+#define RG_USB20_DRVVBUS_OFST (23)
-+#define RG_DEBUG_EN_OFST (22)
-+#define RG_USB20_OTG_PROBE_OFST (20)
-+#define RG_USB20_SW_PLLMODE_OFST (18)
-+#define RG_USB20_BERTH_OFST (16)
-+#define RG_USB20_LBMODE_OFST (13)
-+#define RG_USB20_FORCE_TAP_OFST (12)
-+#define RG_USB20_TAPSEL_OFST (0)
-+
-+//U3D_U2PHYDTM0
-+#define RG_UART_MODE_OFST (30)
-+#define FORCE_UART_I_OFST (29)
-+#define FORCE_UART_BIAS_EN_OFST (28)
-+#define FORCE_UART_TX_OE_OFST (27)
-+#define FORCE_UART_EN_OFST (26)
-+#define FORCE_USB_CLKEN_OFST (25)
-+#define FORCE_DRVVBUS_OFST (24)
-+#define FORCE_DATAIN_OFST (23)
-+#define FORCE_TXVALID_OFST (22)
-+#define FORCE_DM_PULLDOWN_OFST (21)
-+#define FORCE_DP_PULLDOWN_OFST (20)
-+#define FORCE_XCVRSEL_OFST (19)
-+#define FORCE_SUSPENDM_OFST (18)
-+#define FORCE_TERMSEL_OFST (17)
-+#define FORCE_OPMODE_OFST (16)
-+#define UTMI_MUXSEL_OFST (15)
-+#define RG_RESET_OFST (14)
-+#define RG_DATAIN_OFST (10)
-+#define RG_TXVALIDH_OFST (9)
-+#define RG_TXVALID_OFST (8)
-+#define RG_DMPULLDOWN_OFST (7)
-+#define RG_DPPULLDOWN_OFST (6)
-+#define RG_XCVRSEL_OFST (4)
-+#define RG_SUSPENDM_OFST (3)
-+#define RG_TERMSEL_OFST (2)
-+#define RG_OPMODE_OFST (0)
-+
-+//U3D_U2PHYDTM1
-+#define RG_USB20_PRBS7_EN_OFST (31)
-+#define RG_USB20_PRBS7_BITCNT_OFST (24)
-+#define RG_USB20_CLK48M_EN_OFST (23)
-+#define RG_USB20_CLK60M_EN_OFST (22)
-+#define RG_UART_I_OFST (19)
-+#define RG_UART_BIAS_EN_OFST (18)
-+#define RG_UART_TX_OE_OFST (17)
-+#define RG_UART_EN_OFST (16)
-+#define FORCE_VBUSVALID_OFST (13)
-+#define FORCE_SESSEND_OFST (12)
-+#define FORCE_BVALID_OFST (11)
-+#define FORCE_AVALID_OFST (10)
-+#define FORCE_IDDIG_OFST (9)
-+#define FORCE_IDPULLUP_OFST (8)
-+#define RG_VBUSVALID_OFST (5)
-+#define RG_SESSEND_OFST (4)
-+#define RG_BVALID_OFST (3)
-+#define RG_AVALID_OFST (2)
-+#define RG_IDDIG_OFST (1)
-+#define RG_IDPULLUP_OFST (0)
-+
-+//U3D_U2PHYDMON0
-+#define RG_USB20_PRBS7_BERTH_OFST (0)
-+
-+//U3D_U2PHYDMON1
-+#define USB20_UART_O_OFST (31)
-+#define RGO_USB20_LB_PASS_OFST (30)
-+#define RGO_USB20_LB_DONE_OFST (29)
-+#define AD_USB20_BVALID_OFST (28)
-+#define USB20_IDDIG_OFST (27)
-+#define AD_USB20_VBUSVALID_OFST (26)
-+#define AD_USB20_SESSEND_OFST (25)
-+#define AD_USB20_AVALID_OFST (24)
-+#define USB20_LINE_STATE_OFST (22)
-+#define USB20_HST_DISCON_OFST (21)
-+#define USB20_TX_READY_OFST (20)
-+#define USB20_RX_ERROR_OFST (19)
-+#define USB20_RX_ACTIVE_OFST (18)
-+#define USB20_RX_VALIDH_OFST (17)
-+#define USB20_RX_VALID_OFST (16)
-+#define USB20_DATA_OUT_OFST (0)
-+
-+//U3D_U2PHYDMON2
-+#define RGO_TXVALID_CNT_OFST (24)
-+#define RGO_RXACTIVE_CNT_OFST (16)
-+#define RGO_USB20_LB_BERCNT_OFST (8)
-+#define USB20_PROBE_OUT_OFST (0)
-+
-+//U3D_U2PHYDMON3
-+#define RGO_USB20_PRBS7_ERRCNT_OFST (16)
-+#define RGO_USB20_PRBS7_DONE_OFST (3)
-+#define RGO_USB20_PRBS7_LOCK_OFST (2)
-+#define RGO_USB20_PRBS7_PASS_OFST (1)
-+#define RGO_USB20_PRBS7_PASSTH_OFST (0)
-+
-+//U3D_U2PHYBC12C
-+#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28)
-+#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24)
-+#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16)
-+#define RG_CHGDT_ISRC_LEV_OFST (14)
-+#define RG_CHGDT_VDATSRC_OFST (13)
-+#define RG_CHGDT_BGVREF_SEL_OFST (10)
-+#define RG_CHGDT_RDVREF_SEL_OFST (8)
-+#define RG_CHGDT_ISRC_DP_OFST (7)
-+#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6)
-+#define RG_CHGDT_VDAT_DM_OFST (5)
-+#define RG_CHGDT_OPOUT_DP_OFST (4)
-+#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3)
-+#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2)
-+#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1)
-+#define RG_CHGDT_EN_OFST (0)
-+
-+//U3D_U2PHYBC12C1
-+#define RG_CHGDT_REV_OFST (0)
-+
-+//U3D_REGFCOM
-+#define RG_PAGE_OFST (24)
-+#define I2C_MODE_OFST (16)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phya_reg {
-+ //0x0
-+ PHY_LE32 reg0;
-+ PHY_LE32 reg1;
-+ PHY_LE32 reg2;
-+ PHY_LE32 reg3;
-+ //0x10
-+ PHY_LE32 reg4;
-+ PHY_LE32 reg5;
-+ PHY_LE32 reg6;
-+ PHY_LE32 reg7;
-+ //0x20
-+ PHY_LE32 reg8;
-+ PHY_LE32 reg9;
-+ PHY_LE32 rega;
-+ PHY_LE32 regb;
-+ //0x30
-+ PHY_LE32 regc;
-+ PHY_LE32 regd;
-+ PHY_LE32 rege;
-+};
-+
-+//U3D_reg0
-+#define RG_SSUSB_BGR_EN (0x1<<31) //31:31
-+#define RG_SSUSB_CHPEN (0x1<<30) //30:30
-+#define RG_SSUSB_BG_DIV (0x3<<28) //29:28
-+#define RG_SSUSB_INTR_EN (0x1<<26) //26:26
-+#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24
-+#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16
-+#define RG_SSUSB_REF_EN (0x1<<15) //15:15
-+#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11
-+#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9
-+#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7
-+#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6
-+#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0
-+
-+//U3D_reg1
-+#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30
-+#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27
-+#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26
-+#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25
-+#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24
-+#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8
-+#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4
-+#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2
-+#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0
-+
-+//U3D_reg2
-+#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31
-+#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24
-+#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22
-+#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21
-+#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20
-+#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19
-+#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18
-+#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17
-+#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14
-+#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13
-+#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12
-+#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11
-+#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10
-+#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9
-+#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8
-+
-+//U3D_reg3
-+#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16
-+
-+//U3D_reg4
-+#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1
-+
-+//U3D_reg5
-+#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29
-+#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28
-+#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27
-+#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26
-+#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25
-+#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24
-+#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23
-+#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22
-+#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21
-+#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20
-+#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0
-+
-+//U3D_reg6
-+#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31
-+#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30
-+#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24
-+#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23
-+#define RG_SSUSB_TX_SR (0x7<<20) //22:20
-+#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16
-+#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14
-+#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12
-+#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11
-+#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8
-+#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7
-+#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5
-+#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4
-+
-+//U3D_reg7
-+#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12
-+#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10
-+#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7
-+#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6
-+#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5
-+#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4
-+#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3
-+#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2
-+#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1
-+#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0
-+
-+//U3D_regA
-+#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31
-+#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30
-+#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29
-+#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28
-+#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21
-+#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20
-+#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17
-+#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16
-+#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15
-+#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12
-+#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11
-+#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9
-+#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4
-+#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3
-+#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2
-+#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1
-+#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0
-+
-+//U3D_regB
-+#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31
-+#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29
-+#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26
-+#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25
-+#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24
-+#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19
-+#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18
-+#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17
-+#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14
-+#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12
-+#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7
-+#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5
-+#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3
-+#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2
-+
-+//U3D_regC
-+#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28
-+#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16
-+#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8
-+#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0
-+
-+//U3D_redD
-+#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8
-+#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0
-+
-+//U3D_regE
-+#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3
-+#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2
-+#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1
-+#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_reg0
-+#define RG_SSUSB_BGR_EN_OFST (31)
-+#define RG_SSUSB_CHPEN_OFST (30)
-+#define RG_SSUSB_BG_DIV_OFST (28)
-+#define RG_SSUSB_INTR_EN_OFST (26)
-+#define RG_SSUSB_MPX_OUT_SEL_OFST (24)
-+#define RG_SSUSB_MPX_SEL_OFST (16)
-+#define RG_SSUSB_REF_EN_OFST (15)
-+#define RG_SSUSB_VRT_VREF_SEL_OFST (11)
-+#define RG_SSUSB_BG_RASEL_OFST (9)
-+#define RG_SSUSB_BG_RBSEL_OFST (7)
-+#define RG_SSUSB_BG_MONEN_OFST (6)
-+#define RG_PCIE_CLKDRV_OFFSET_OFST (0)
-+
-+//U3D_reg1
-+#define RG_PCIE_CLKDRV_SLEW_OFST (30)
-+#define RG_PCIE_CLKDRV_AMP_OFST (27)
-+#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26)
-+#define RG_SSUSB_XTAL_MON_EN_OFST (25)
-+#define RG_SSUSB_XTAL_HYS_OFST (24)
-+#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8)
-+#define RG_SSUSB_SYSPLL_RESERVE_OFST (4)
-+#define RG_SSUSB_SYSPLL_FBSEL_OFST (2)
-+#define RG_SSUSB_SYSPLL_PREDIV_OFST (0)
-+
-+//U3D_reg2
-+#define RG_SSUSB_SYSPLL_LF_OFST (31)
-+#define RG_SSUSB_SYSPLL_FBDIV_OFST (24)
-+#define RG_SSUSB_SYSPLL_POSDIV_OFST (22)
-+#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21)
-+#define RG_SSUSB_SYSPLL_BLP_OFST (20)
-+#define RG_SSUSB_SYSPLL_BP_OFST (19)
-+#define RG_SSUSB_SYSPLL_BR_OFST (18)
-+#define RG_SSUSB_SYSPLL_BC_OFST (17)
-+#define RG_SSUSB_SYSPLL_DIVEN_OFST (14)
-+#define RG_SSUSB_SYSPLL_FPEN_OFST (13)
-+#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12)
-+#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11)
-+#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10)
-+#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9)
-+#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8)
-+
-+//U3D_reg3
-+#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16)
-+
-+//U3D_reg4
-+#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1)
-+
-+//U3D_reg5
-+#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29)
-+#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28)
-+#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27)
-+#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26)
-+#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25)
-+#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24)
-+#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23)
-+#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22)
-+#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21)
-+#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20)
-+#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0)
-+
-+//U3D_reg6
-+#define RG_SSUSB_TX250MCK_INVB_OFST (31)
-+#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30)
-+#define RG_SSUSB_IDRV_CALIB_OFST (24)
-+#define RG_SSUSB_TX_R50_FON_OFST (23)
-+#define RG_SSUSB_TX_SR_OFST (20)
-+#define RG_SSUSB_TX_EIDLE_CM_OFST (16)
-+#define RG_SSUSB_RXDET_RSEL_OFST (14)
-+#define RG_SSUSB_RXDET_VTHSEL_OFST (12)
-+#define RG_SSUSB_CKMON_EN_OFST (11)
-+#define RG_SSUSB_CKMON_SEL_OFST (8)
-+#define RG_SSUSB_TX_VLMON_EN_OFST (7)
-+#define RG_SSUSB_TX_VLMON_SEL_OFST (6)
-+#define RG_SSUSB_RXLBTX_EN_OFST (5)
-+#define RG_SSUSB_TXLBRX_EN_OFST (4)
-+
-+//U3D_reg7
-+#define RG_SSUSB_RESERVE_OFST (12)
-+#define RG_SSUSB_PLL_CKCTRL_OFST (10)
-+#define RG_SSUSB_PLL_POSDIV_OFST (8)
-+#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7)
-+#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6)
-+#define RG_SSUSB_PLL_EP_EN_OFST (5)
-+#define RG_SSUSB_PLL_VOD_EN_OFST (4)
-+#define RG_SSUSB_PLL_V11_EN_OFST (3)
-+#define RG_SSUSB_PLL_MONREF_EN_OFST (2)
-+#define RG_SSUSB_PLL_MONCK_EN_OFST (1)
-+#define RG_SSUSB_PLL_MONVC_EN_OFST (0)
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_RESERVE_OFST (0)
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_DDS_DMY_OFST (16)
-+#define RG_SSUSB_PLL_SSC_PRD_OFST (0)
-+
-+//U3D_regA
-+#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31)
-+#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30)
-+#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29)
-+#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28)
-+#define RG_SSUSB_PLL_DDS_VADJ_OFST (21)
-+#define RG_SSUSB_PLL_DDS_MONEN_OFST (20)
-+#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17)
-+#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16)
-+#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15)
-+#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14)
-+#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13)
-+#define RG_SSUSB_CDR_OSCDET_EN_OFST (12)
-+#define RG_SSUSB_CDR_MONMUX_OFST (11)
-+#define RG_SSUSB_CDR_CKCTRL_OFST (9)
-+#define RG_SSUSB_CDR_ACCEN_OFST (8)
-+#define RG_SSUSB_CDR_BYPASS_OFST (6)
-+#define RG_SSUSB_CDR_PI_SLEW_OFST (4)
-+#define RG_SSUSB_CDR_EPEN_OFST (3)
-+#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2)
-+#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1)
-+#define RG_SSUSB_CDR_MONEN_OFST (0)
-+
-+//U3D_regB
-+#define RG_SSUSB_CDR_MONEN_DIG_OFST (31)
-+#define RG_SSUSB_CDR_REGOD_OFST (29)
-+#define RG_SSUSB_RX_DAC_EN_OFST (26)
-+#define RG_SSUSB_RX_DAC_PWD_OFST (25)
-+#define RG_SSUSB_EQ_CURSEL_OFST (24)
-+#define RG_SSUSB_RX_DAC_MUX_OFST (19)
-+#define RG_SSUSB_RX_R2T_EN_OFST (18)
-+#define RG_SSUSB_RX_T2R_EN_OFST (17)
-+#define RG_SSUSB_RX_50_LOWER_OFST (14)
-+#define RG_SSUSB_RX_50_TAR_OFST (12)
-+#define RG_SSUSB_RX_SW_CTRL_OFST (7)
-+#define RG_PCIE_SIGDET_VTH_OFST (5)
-+#define RG_PCIE_SIGDET_LPF_OFST (3)
-+#define RG_SSUSB_LFPS_MON_EN_OFST (2)
-+
-+//U3D_regC
-+#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28)
-+#define RG_SSUSB_CDR_RESERVE_OFST (16)
-+#define RG_SSUSB_RXAFE_RESERVE_OFST (8)
-+#define RG_PCIE_RX_RESERVE_OFST (0)
-+
-+//U3D_redD
-+#define RGS_SSUSB_CDR_NO_OSC_OFST (8)
-+#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0)
-+
-+//U3D_regE
-+#define RG_SSUSB_INT_BIAS_SEL_OFST (4)
-+#define RG_SSUSB_EXT_BIAS_SEL_OFST (3)
-+#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2)
-+#define RG_SSUSB_RX_PD_RST_OFST (1)
-+#define RG_SSUSB_RX_PD_RST_PASS_OFST (0)
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phya_da_reg {
-+ //0x0
-+ PHY_LE32 reg0;
-+ PHY_LE32 reg1;
-+ PHY_LE32 reg4;
-+ PHY_LE32 reg5;
-+ //0x10
-+ PHY_LE32 reg6;
-+ PHY_LE32 reg7;
-+ PHY_LE32 reg8;
-+ PHY_LE32 reg9;
-+ //0x20
-+ PHY_LE32 reg10;
-+ PHY_LE32 reg12;
-+ PHY_LE32 reg13;
-+ PHY_LE32 reg14;
-+ //0x30
-+ PHY_LE32 reg15;
-+ PHY_LE32 reg16;
-+ PHY_LE32 reg19;
-+ PHY_LE32 reg20;
-+ //0x40
-+ PHY_LE32 reg21;
-+ PHY_LE32 reg23;
-+ PHY_LE32 reg25;
-+ PHY_LE32 reg26;
-+ //0x50
-+ PHY_LE32 reg28;
-+ PHY_LE32 reg29;
-+ PHY_LE32 reg30;
-+ PHY_LE32 reg31;
-+ //0x60
-+ PHY_LE32 reg32;
-+ PHY_LE32 reg33;
-+};
-+
-+//U3D_reg0
-+#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24
-+#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23
-+#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22
-+#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21
-+#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20
-+#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18
-+#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14
-+#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12
-+#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0
-+
-+//U3D_reg1
-+#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30
-+#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29
-+#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28
-+#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27
-+#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26
-+#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25
-+#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24
-+#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18
-+#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17
-+#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16
-+#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8
-+#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3
-+#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2
-+#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1
-+#define RG_PCIE_MODE_U3 (0x1<<0) //0:0
-+
-+//U3D_reg4
-+#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22
-+#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19
-+#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16
-+#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13
-+#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10
-+#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0
-+
-+//U3D_reg5
-+#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27
-+#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24
-+#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21
-+#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18
-+#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15
-+#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12
-+#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9
-+#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0
-+
-+//U3D_reg6
-+#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24
-+#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16
-+#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8
-+#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4
-+#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0
-+
-+//U3D_reg7
-+#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24
-+#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16
-+#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8
-+#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4
-+#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24
-+#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24
-+#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16
-+#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8
-+#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0
-+
-+//U3D_reg10
-+#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26
-+#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24
-+#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18
-+#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16
-+#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8
-+#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0
-+
-+//U3D_reg12
-+#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0
-+
-+//U3D_reg13
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0
-+
-+//U3D_reg14
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0
-+
-+//U3D_reg15
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0
-+
-+//U3D_reg16
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0
-+
-+//U3D_reg19
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0
-+
-+//U3D_reg20
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0
-+
-+//U3D_reg21
-+#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0
-+
-+//U3D_reg23
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0
-+
-+//U3D_reg25
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0
-+
-+//U3D_reg26
-+#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25
-+#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24
-+#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16
-+#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8
-+#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0
-+
-+//U3D_reg28
-+#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24
-+#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16
-+#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10
-+#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8
-+#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0
-+
-+//U3D_reg29
-+#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24
-+#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16
-+#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0
-+
-+//U3D_reg30
-+#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24
-+#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16
-+#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6
-+#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3
-+#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0
-+
-+//U3D_reg31
-+#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24
-+#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16
-+#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8
-+#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0
-+
-+//U3D_reg32
-+#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30
-+#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28
-+#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26
-+#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24
-+#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14
-+#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12
-+#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11
-+#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10
-+#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9
-+#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7
-+#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0
-+
-+//U3D_reg33
-+#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26
-+#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25
-+#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24
-+#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23
-+#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16
-+#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8
-+#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6
-+#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4
-+#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2
-+#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_reg0
-+#define RG_PCIE_SPEED_PE2D_OFST (24)
-+#define RG_PCIE_SPEED_PE2H_OFST (23)
-+#define RG_PCIE_SPEED_PE1D_OFST (22)
-+#define RG_PCIE_SPEED_PE1H_OFST (21)
-+#define RG_PCIE_SPEED_U3_OFST (20)
-+#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18)
-+#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16)
-+#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14)
-+#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12)
-+#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4)
-+#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2)
-+#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0)
-+
-+//U3D_reg1
-+#define RG_USB20_REFCK_SEL_PE2D_OFST (30)
-+#define RG_USB20_REFCK_SEL_PE2H_OFST (29)
-+#define RG_USB20_REFCK_SEL_PE1D_OFST (28)
-+#define RG_USB20_REFCK_SEL_PE1H_OFST (27)
-+#define RG_USB20_REFCK_SEL_U3_OFST (26)
-+#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25)
-+#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24)
-+#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18)
-+#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17)
-+#define RG_PCIE_REFCK_DIV4_U3_OFST (16)
-+#define RG_PCIE_MODE_PE2D_OFST (8)
-+#define RG_PCIE_MODE_PE2H_OFST (3)
-+#define RG_PCIE_MODE_PE1D_OFST (2)
-+#define RG_PCIE_MODE_PE1H_OFST (1)
-+#define RG_PCIE_MODE_U3_OFST (0)
-+
-+//U3D_reg4
-+#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22)
-+#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19)
-+#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13)
-+#define RG_SSUSB_PLL_DIVEN_U3_OFST (10)
-+#define RG_SSUSB_PLL_BC_PE2D_OFST (8)
-+#define RG_SSUSB_PLL_BC_PE2H_OFST (6)
-+#define RG_SSUSB_PLL_BC_PE1D_OFST (4)
-+#define RG_SSUSB_PLL_BC_PE1H_OFST (2)
-+#define RG_SSUSB_PLL_BC_U3_OFST (0)
-+
-+//U3D_reg5
-+#define RG_SSUSB_PLL_BR_PE2D_OFST (27)
-+#define RG_SSUSB_PLL_BR_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_BR_PE1D_OFST (21)
-+#define RG_SSUSB_PLL_BR_PE1H_OFST (18)
-+#define RG_SSUSB_PLL_BR_U3_OFST (15)
-+#define RG_SSUSB_PLL_IC_PE2D_OFST (12)
-+#define RG_SSUSB_PLL_IC_PE2H_OFST (9)
-+#define RG_SSUSB_PLL_IC_PE1D_OFST (6)
-+#define RG_SSUSB_PLL_IC_PE1H_OFST (3)
-+#define RG_SSUSB_PLL_IC_U3_OFST (0)
-+
-+//U3D_reg6
-+#define RG_SSUSB_PLL_IR_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_IR_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_IR_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_IR_PE1H_OFST (4)
-+#define RG_SSUSB_PLL_IR_U3_OFST (0)
-+
-+//U3D_reg7
-+#define RG_SSUSB_PLL_BP_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_BP_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_BP_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_BP_PE1H_OFST (4)
-+#define RG_SSUSB_PLL_BP_U3_OFST (0)
-+
-+//U3D_reg8
-+#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24)
-+#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8)
-+#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2)
-+#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0)
-+
-+//U3D_reg9
-+#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8)
-+#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0)
-+
-+//U3D_reg10
-+#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26)
-+#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18)
-+#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16)
-+#define RG_SSUSB_PLL_PREDIV_U3_OFST (8)
-+#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0)
-+
-+//U3D_reg12
-+#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0)
-+
-+//U3D_reg13
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0)
-+
-+//U3D_reg14
-+#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0)
-+
-+//U3D_reg15
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0)
-+
-+//U3D_reg16
-+#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0)
-+
-+//U3D_reg19
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0)
-+
-+//U3D_reg20
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0)
-+
-+//U3D_reg21
-+#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0)
-+
-+//U3D_reg23
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0)
-+
-+//U3D_reg25
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16)
-+#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0)
-+
-+//U3D_reg26
-+#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25)
-+#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24)
-+#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16)
-+#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8)
-+#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0)
-+
-+//U3D_reg28
-+#define RG_SSUSB_CDR_BPA_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BPA_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BPA_PE1D_OFST (10)
-+#define RG_SSUSB_CDR_BPA_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_BPA_U3_OFST (0)
-+
-+//U3D_reg29
-+#define RG_SSUSB_CDR_BPB_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BPB_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BPB_PE1D_OFST (6)
-+#define RG_SSUSB_CDR_BPB_PE1H_OFST (3)
-+#define RG_SSUSB_CDR_BPB_U3_OFST (0)
-+
-+//U3D_reg30
-+#define RG_SSUSB_CDR_BR_PE2D_OFST (24)
-+#define RG_SSUSB_CDR_BR_PE2H_OFST (16)
-+#define RG_SSUSB_CDR_BR_PE1D_OFST (6)
-+#define RG_SSUSB_CDR_BR_PE1H_OFST (3)
-+#define RG_SSUSB_CDR_BR_U3_OFST (0)
-+
-+//U3D_reg31
-+#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24)
-+#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16)
-+#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_FBDIV_U3_OFST (0)
-+
-+//U3D_reg32
-+#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30)
-+#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28)
-+#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26)
-+#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24)
-+#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16)
-+#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14)
-+#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12)
-+#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11)
-+#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10)
-+#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9)
-+#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8)
-+#define RG_SSUSB_CDR_KVSEL_U3_OFST (7)
-+#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0)
-+
-+//U3D_reg33
-+#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26)
-+#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25)
-+#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24)
-+#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23)
-+#define RG_SSUSB_RX_CMPWD_U3_OFST (16)
-+#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8)
-+#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6)
-+#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4)
-+#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2)
-+#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phyd_reg {
-+ //0x0
-+ PHY_LE32 phyd_mix0;
-+ PHY_LE32 phyd_mix1;
-+ PHY_LE32 phyd_lfps0;
-+ PHY_LE32 phyd_lfps1;
-+ //0x10
-+ PHY_LE32 phyd_impcal0;
-+ PHY_LE32 phyd_impcal1;
-+ PHY_LE32 phyd_txpll0;
-+ PHY_LE32 phyd_txpll1;
-+ //0x20
-+ PHY_LE32 phyd_txpll2;
-+ PHY_LE32 phyd_fl0;
-+ PHY_LE32 phyd_mix2;
-+ PHY_LE32 phyd_rx0;
-+ //0x30
-+ PHY_LE32 phyd_t2rlb;
-+ PHY_LE32 phyd_cppat;
-+ PHY_LE32 phyd_mix3;
-+ PHY_LE32 phyd_ebufctl;
-+ //0x40
-+ PHY_LE32 phyd_pipe0;
-+ PHY_LE32 phyd_pipe1;
-+ PHY_LE32 phyd_mix4;
-+ PHY_LE32 phyd_ckgen0;
-+ //0x50
-+ PHY_LE32 phyd_mix5;
-+ PHY_LE32 phyd_reserved;
-+ PHY_LE32 phyd_cdr0;
-+ PHY_LE32 phyd_cdr1;
-+ //0x60
-+ PHY_LE32 phyd_pll_0;
-+ PHY_LE32 phyd_pll_1;
-+ PHY_LE32 phyd_bcn_det_1;
-+ PHY_LE32 phyd_bcn_det_2;
-+ //0x70
-+ PHY_LE32 eq0;
-+ PHY_LE32 eq1;
-+ PHY_LE32 eq2;
-+ PHY_LE32 eq3;
-+ //0x80
-+ PHY_LE32 eq_eye0;
-+ PHY_LE32 eq_eye1;
-+ PHY_LE32 eq_eye2;
-+ PHY_LE32 eq_dfe0;
-+ //0x90
-+ PHY_LE32 eq_dfe1;
-+ PHY_LE32 eq_dfe2;
-+ PHY_LE32 eq_dfe3;
-+ PHY_LE32 reserve0;
-+ //0xa0
-+ PHY_LE32 phyd_mon0;
-+ PHY_LE32 phyd_mon1;
-+ PHY_LE32 phyd_mon2;
-+ PHY_LE32 phyd_mon3;
-+ //0xb0
-+ PHY_LE32 phyd_mon4;
-+ PHY_LE32 phyd_mon5;
-+ PHY_LE32 phyd_mon6;
-+ PHY_LE32 phyd_mon7;
-+ //0xc0
-+ PHY_LE32 phya_rx_mon0;
-+ PHY_LE32 phya_rx_mon1;
-+ PHY_LE32 phya_rx_mon2;
-+ PHY_LE32 phya_rx_mon3;
-+ //0xd0
-+ PHY_LE32 phya_rx_mon4;
-+ PHY_LE32 phya_rx_mon5;
-+ PHY_LE32 phyd_cppat2;
-+ PHY_LE32 eq_eye3;
-+ //0xe0
-+ PHY_LE32 kband_out;
-+ PHY_LE32 kband_out1;
-+};
-+
-+//U3D_PHYD_MIX0
-+#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31
-+#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30
-+#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29
-+#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28
-+#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27
-+#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24
-+#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16
-+#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15
-+#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14
-+#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13
-+#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12
-+#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8
-+#define RG_SSUSB_COMCNT (0xf<<4) //7:4
-+#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0
-+
-+//U3D_PHYD_MIX1
-+#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31
-+#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28
-+#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24
-+#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23
-+#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22
-+#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16
-+#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15
-+#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8
-+#define RG_SSUSB_BERT_EN (0x1<<7) //7:7
-+#define RG_SSUSB_SCP_TH (0x7<<4) //6:4
-+#define RG_SSUSB_SCP_EN (0x1<<3) //3:3
-+#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0
-+
-+//U3D_PHYD_LFPS0
-+#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29
-+#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24
-+#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23
-+#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22
-+#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20
-+#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16
-+#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15
-+#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14
-+#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13
-+#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8
-+#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7
-+#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5
-+#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0
-+
-+//U3D_PHYD_LFPS1
-+#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28
-+#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24
-+#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16
-+#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8
-+#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0
-+
-+//U3D_PHYD_IMPCAL0
-+#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31
-+#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29
-+#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24
-+#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16
-+#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10
-+#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_IMPCAL1
-+#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31
-+#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30
-+#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29
-+#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24
-+#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16
-+#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10
-+#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_TXPLL0
-+#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27
-+#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25
-+#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16
-+#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12
-+#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10
-+#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0
-+
-+//U3D_PHYD_TXPLL1
-+#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31
-+#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30
-+#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28
-+#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27
-+#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26
-+#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25
-+#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24
-+#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23
-+#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22
-+#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16
-+#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15
-+#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14
-+#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12
-+#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11
-+#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8
-+#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7
-+#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6
-+#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5
-+#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4
-+#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3
-+#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2
-+
-+//U3D_PHYD_TXPLL2
-+#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31
-+#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30
-+#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29
-+#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28
-+#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27
-+#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25
-+#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24
-+#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16
-+#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11
-+#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10
-+#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8
-+#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7
-+#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6
-+#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0
-+
-+//U3D_PHYD_FL0
-+#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16
-+#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MIX2
-+#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31
-+#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30
-+#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29
-+#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24
-+#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18
-+#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16
-+#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8
-+#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0
-+
-+//U3D_PHYD_RX0
-+#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24
-+#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16
-+#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15
-+#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14
-+#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13
-+#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11
-+#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10
-+#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9
-+#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8
-+#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7
-+#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6
-+#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5
-+#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3
-+#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2
-+#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1
-+#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0
-+
-+//U3D_PHYD_T2RLB
-+#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28
-+#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27
-+#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26
-+#define RG_SSUSB_VALID_EN (0x1<<25) //25:25
-+#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24
-+#define RG_SSUSB_K_EMP (0xf<<20) //23:20
-+#define RG_SSUSB_K_FUL (0xf<<16) //19:16
-+#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12
-+#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10
-+#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8
-+#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0
-+
-+//U3D_PHYD_CPPAT
-+#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24
-+#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21
-+#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20
-+#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16
-+#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8
-+#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0
-+
-+//U3D_PHYD_MIX3
-+#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31
-+#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30
-+#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28
-+#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24
-+#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23
-+#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20
-+#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19
-+#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16
-+#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15
-+#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14
-+#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12
-+#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11
-+#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0
-+
-+//U3D_PHYD_EBUFCTL
-+#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_PIPE0
-+#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30
-+#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29
-+#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28
-+#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26
-+#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24
-+#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23
-+#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22
-+#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21
-+#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20
-+#define RG_SSUSB_TXDATAK (0xf<<16) //19:16
-+#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15
-+#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14
-+#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12
-+#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4
-+#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1
-+#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0
-+
-+//U3D_PHYD_PIPE1
-+#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MIX4
-+#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24
-+#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16
-+#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0
-+
-+//U3D_PHYD_CKGEN0
-+#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27
-+#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24
-+#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8
-+#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0
-+
-+//U3D_PHYD_MIX5
-+#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16
-+#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0
-+
-+//U3D_PHYD_RESERVED
-+#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0
-+//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11)
-+//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10)
-+
-+//U3D_PHYD_CDR0
-+#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_PHYD_CDR1
-+#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6
-+#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_PHYD_PLL_0
-+#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28
-+#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27
-+#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26
-+#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25
-+#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15
-+#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5
-+#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4
-+#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3
-+#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2
-+#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1
-+#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0
-+
-+//U3D_PHYD_PLL_1
-+#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
-+#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
-+#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
-+#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
-+
-+//U3D_PHYD_BCN_DET_1
-+#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16
-+#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0
-+
-+//U3D_PHYD_BCN_DET_2
-+#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16
-+#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12
-+#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0
-+
-+//U3D_EQ0
-+#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0
-+
-+//U3D_EQ1
-+#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0
-+
-+//U3D_EQ2
-+#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14
-+#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11
-+#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8
-+#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6
-+#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3
-+#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0
-+
-+//U3D_EQ3
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24
-+#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0
-+
-+//U3D_EQ_EYE0
-+#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25
-+#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24
-+#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4
-+#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3
-+
-+//U3D_EQ_EYE1
-+#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24
-+#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7
-+
-+//U3D_EQ_EYE2
-+#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31
-+#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24
-+#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22
-+#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16
-+
-+//U3D_EQ_DFE0
-+#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28
-+#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27
-+#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24
-+#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23
-+#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16
-+#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8
-+#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0
-+
-+//U3D_EQ_DFE1
-+#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16
-+#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12
-+#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8
-+#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7
-+#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6
-+#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4
-+#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2
-+#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1
-+#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0
-+
-+//U3D_EQ_DFE2
-+#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24
-+#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16
-+#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8
-+#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0
-+
-+//U3D_EQ_DFE3
-+#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MON0
-+#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16
-+#define RGS_SSUSB_LFPS (0xf<<12) //15:12
-+#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8
-+#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0
-+
-+//U3D_PHYD_MON1
-+#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON2
-+#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_RETRACK (0xf<<12) //15:12
-+#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10
-+#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9
-+#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8
-+#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0
-+
-+//U3D_PHYD_MON3
-+#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON4
-+#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24
-+#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16
-+#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0
-+
-+//U3D_PHYD_MON5
-+#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16
-+#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15
-+#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14
-+#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13
-+#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12
-+#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11
-+#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10
-+#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9
-+#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8
-+#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6
-+#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5
-+#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4
-+#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3
-+#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2
-+#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1
-+#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0
-+
-+//U3D_PHYD_MON6
-+#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30
-+#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29
-+#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24
-+#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16
-+#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8
-+#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4
-+#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0
-+
-+//U3D_PHYD_MON7
-+#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8
-+#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0
-+
-+//U3D_PHYA_RX_MON0
-+#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24
-+#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16
-+#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON1
-+#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24
-+#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16
-+#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON2
-+#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31
-+#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24
-+#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16
-+#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8
-+#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0
-+
-+//U3D_PHYA_RX_MON3
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0
-+
-+//U3D_PHYA_RX_MON4
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0
-+
-+//U3D_PHYA_RX_MON5
-+#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8
-+#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7
-+#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0
-+
-+//U3D_PHYD_CPPAT2
-+#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16
-+#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8
-+#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0
-+
-+//U3D_EQ_EYE3
-+#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24
-+#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0
-+
-+//U3D_KBAND_OUT
-+#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
-+#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
-+#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
-+#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
-+
-+//U3D_KBAND_OUT1
-+#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24
-+#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16
-+#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8
-+#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_PHYD_MIX0
-+#define RG_SSUSB_P_P3_TX_NG_OFST (31)
-+#define RG_SSUSB_TSEQ_EN_OFST (30)
-+#define RG_SSUSB_TSEQ_POLEN_OFST (29)
-+#define RG_SSUSB_TSEQ_POL_OFST (28)
-+#define RG_SSUSB_P_P3_PCLK_NG_OFST (27)
-+#define RG_SSUSB_TSEQ_TH_OFST (24)
-+#define RG_SSUSB_PRBS_BERTH_OFST (16)
-+#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15)
-+#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14)
-+#define RG_SSUSB_PRBS_EN_OFST (13)
-+#define RG_SSUSB_BPSLOCK_OFST (12)
-+#define RG_SSUSB_RTCOMCNT_OFST (8)
-+#define RG_SSUSB_COMCNT_OFST (4)
-+#define RG_SSUSB_PRBSEL_CALIB_OFST (0)
-+
-+//U3D_PHYD_MIX1
-+#define RG_SSUSB_SLEEP_EN_OFST (31)
-+#define RG_SSUSB_PRBSEL_PCS_OFST (28)
-+#define RG_SSUSB_TXLFPS_PRD_OFST (24)
-+#define RG_SSUSB_P_RX_P0S_CK_OFST (23)
-+#define RG_SSUSB_P_TX_P0S_CK_OFST (22)
-+#define RG_SSUSB_PDNCTL_OFST (16)
-+#define RG_SSUSB_TX_DRV_EN_OFST (15)
-+#define RG_SSUSB_TX_DRV_SEL_OFST (14)
-+#define RG_SSUSB_TX_DRV_DLY_OFST (8)
-+#define RG_SSUSB_BERT_EN_OFST (7)
-+#define RG_SSUSB_SCP_TH_OFST (4)
-+#define RG_SSUSB_SCP_EN_OFST (3)
-+#define RG_SSUSB_RXANSIDEC_TEST_OFST (0)
-+
-+//U3D_PHYD_LFPS0
-+#define RG_SSUSB_LFPS_PWD_OFST (30)
-+#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29)
-+#define RG_SSUSB_RXLFPS_OVF_OFST (24)
-+#define RG_SSUSB_P3_ENTRY_SEL_OFST (23)
-+#define RG_SSUSB_P3_ENTRY_OFST (22)
-+#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20)
-+#define RG_SSUSB_RXLFPS_CDRTH_OFST (16)
-+#define RG_SSUSB_LOCK5G_BLOCK_OFST (15)
-+#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14)
-+#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13)
-+#define RG_SSUSB_RXLFPS_LOB_OFST (8)
-+#define RG_SSUSB_TXLFPS_EN_OFST (7)
-+#define RG_SSUSB_TXLFPS_SEL_OFST (6)
-+#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5)
-+#define RG_SSUSB_RXLFPS_UPB_OFST (0)
-+
-+//U3D_PHYD_LFPS1
-+#define RG_SSUSB_RX_IMP_BIAS_OFST (28)
-+#define RG_SSUSB_TX_IMP_BIAS_OFST (24)
-+#define RG_SSUSB_FWAKE_TH_OFST (16)
-+#define RG_SSUSB_RXLFPS_UDF_OFST (8)
-+#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0)
-+
-+//U3D_PHYD_IMPCAL0
-+#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31)
-+#define RG_SSUSB_TX_IMPCAL_EN_OFST (30)
-+#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29)
-+#define RG_SSUSB_TX_IMPSEL_OFST (24)
-+#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16)
-+#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10)
-+#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0)
-+
-+//U3D_PHYD_IMPCAL1
-+#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31)
-+#define RG_SSUSB_RX_IMPCAL_EN_OFST (30)
-+#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29)
-+#define RG_SSUSB_RX_IMPSEL_OFST (24)
-+#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16)
-+#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10)
-+#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0)
-+
-+//U3D_PHYD_TXPLL0
-+#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27)
-+#define RG_SSUSB_TXPLL_ON_OFST (26)
-+#define RG_SSUSB_FORCE_TXPLLON_OFST (25)
-+#define RG_SSUSB_TXPLL_STBCYC_OFST (16)
-+#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12)
-+#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10)
-+#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0)
-+
-+//U3D_PHYD_TXPLL1
-+#define RG_SSUSB_PLL_NCPO_EN_OFST (31)
-+#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30)
-+#define RG_SSUSB_PLL_NCPO_CHG_OFST (28)
-+#define RG_SSUSB_PLL_DDS_RSTB_OFST (27)
-+#define RG_SSUSB_PLL_DDS_PWDB_OFST (26)
-+#define RG_SSUSB_PLL_DDSEN_OFST (25)
-+#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24)
-+#define RG_SSUSB_PLL_PWD_OFST (23)
-+#define RG_SSUSB_RX_AFE_PWD_OFST (22)
-+#define RG_SSUSB_PLL_TCADJ_OFST (16)
-+#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15)
-+#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14)
-+#define RG_SSUSB_FORCE_CDR_PWD_OFST (13)
-+#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12)
-+#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11)
-+#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9)
-+#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8)
-+#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7)
-+#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6)
-+#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5)
-+#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4)
-+#define RG_SSUSB_FORCE_PLL_PWD_OFST (3)
-+#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2)
-+
-+//U3D_PHYD_TXPLL2
-+#define RG_SSUSB_TX_LFPS_EN_OFST (31)
-+#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30)
-+#define RG_SSUSB_TX_LFPS_OFST (29)
-+#define RG_SSUSB_FORCE_TX_LFPS_OFST (28)
-+#define RG_SSUSB_RXPLL_STB_OFST (27)
-+#define RG_SSUSB_TXPLL_STB_OFST (26)
-+#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25)
-+#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24)
-+#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16)
-+#define RG_SSUSB_RXPLL_STBMODE_OFST (11)
-+#define RG_SSUSB_RXPLL_ON_OFST (10)
-+#define RG_SSUSB_FORCE_RXPLLON_OFST (9)
-+#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8)
-+#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7)
-+#define RG_SSUSB_CDR_PWD_OFST (6)
-+#define RG_SSUSB_CDR_TCADJ_OFST (0)
-+
-+//U3D_PHYD_FL0
-+#define RG_SSUSB_RX_FL_TARGET_OFST (16)
-+#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0)
-+
-+//U3D_PHYD_MIX2
-+#define RG_SSUSB_RX_EQ_RST_OFST (31)
-+#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30)
-+#define RG_SSUSB_RXVAL_RST_OFST (29)
-+#define RG_SSUSB_RXVAL_CNT_OFST (24)
-+#define RG_SSUSB_CDROS_EN_OFST (18)
-+#define RG_SSUSB_CDR_LCKOP_OFST (16)
-+#define RG_SSUSB_RX_FL_LOCKTH_OFST (8)
-+#define RG_SSUSB_RX_FL_OFFSET_OFST (0)
-+
-+//U3D_PHYD_RX0
-+#define RG_SSUSB_T2RLB_BERTH_OFST (24)
-+#define RG_SSUSB_T2RLB_PAT_OFST (16)
-+#define RG_SSUSB_T2RLB_EN_OFST (15)
-+#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14)
-+#define RG_SSUSB_T2RLB_SERIAL_OFST (13)
-+#define RG_SSUSB_T2RLB_MODE_OFST (11)
-+#define RG_SSUSB_RX_SAOSC_EN_OFST (10)
-+#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9)
-+#define RG_SSUSB_RX_DFE_OPTION_OFST (8)
-+#define RG_SSUSB_RX_DFE_EN_OFST (7)
-+#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6)
-+#define RG_SSUSB_RX_EQ_EN_OFST (5)
-+#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4)
-+#define RG_SSUSB_RX_SAOSC_RST_OFST (3)
-+#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2)
-+#define RG_SSUSB_RX_DFE_RST_OFST (1)
-+#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0)
-+
-+//U3D_PHYD_T2RLB
-+#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28)
-+#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27)
-+#define RG_SSUSB_BPANSIENC_OFST (26)
-+#define RG_SSUSB_VALID_EN_OFST (25)
-+#define RG_SSUSB_EBUF_SRST_OFST (24)
-+#define RG_SSUSB_K_EMP_OFST (20)
-+#define RG_SSUSB_K_FUL_OFST (16)
-+#define RG_SSUSB_T2RLB_BDATRST_OFST (12)
-+#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10)
-+#define RG_SSUSB_T2RLB_PATMODE_OFST (8)
-+#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0)
-+
-+//U3D_PHYD_CPPAT
-+#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24)
-+#define RG_SSUSB_CPPAT_TOZ_OFST (21)
-+#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20)
-+#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16)
-+#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8)
-+#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0)
-+
-+//U3D_PHYD_MIX3
-+#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31)
-+#define RG_SSUSB_P_CDROS_EN_OFST (30)
-+#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28)
-+#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24)
-+#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23)
-+#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20)
-+#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19)
-+#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16)
-+#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15)
-+#define RG_SSUSB_PLL_SSCEN_OFST (14)
-+#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13)
-+#define RG_SSUSB_CDR_PI_PWD_OFST (12)
-+#define RG_SSUSB_CDR_PI_MODE_OFST (11)
-+#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0)
-+
-+//U3D_PHYD_EBUFCTL
-+#define RG_SSUSB_EBUFCTL_OFST (0)
-+
-+//U3D_PHYD_PIPE0
-+#define RG_SSUSB_RXTERMINATION_OFST (30)
-+#define RG_SSUSB_RXEQTRAINING_OFST (29)
-+#define RG_SSUSB_RXPOLARITY_OFST (28)
-+#define RG_SSUSB_TXDEEMPH_OFST (26)
-+#define RG_SSUSB_POWERDOWN_OFST (24)
-+#define RG_SSUSB_TXONESZEROS_OFST (23)
-+#define RG_SSUSB_TXELECIDLE_OFST (22)
-+#define RG_SSUSB_TXDETECTRX_OFST (21)
-+#define RG_SSUSB_PIPE_SEL_OFST (20)
-+#define RG_SSUSB_TXDATAK_OFST (16)
-+#define RG_SSUSB_CDR_STABLE_SEL_OFST (15)
-+#define RG_SSUSB_CDR_STABLE_OFST (14)
-+#define RG_SSUSB_CDR_RSTB_SEL_OFST (13)
-+#define RG_SSUSB_CDR_RSTB_OFST (12)
-+#define RG_SSUSB_P_ERROR_SEL_OFST (4)
-+#define RG_SSUSB_TXMARGIN_OFST (1)
-+#define RG_SSUSB_TXCOMPLIANCE_OFST (0)
-+
-+//U3D_PHYD_PIPE1
-+#define RG_SSUSB_TXDATA_OFST (0)
-+
-+//U3D_PHYD_MIX4
-+#define RG_SSUSB_CDROS_CNT_OFST (24)
-+#define RG_SSUSB_T2RLB_BER_EN_OFST (16)
-+#define RG_SSUSB_T2RLB_BER_RATE_OFST (0)
-+
-+//U3D_PHYD_CKGEN0
-+#define RG_SSUSB_RFIFO_IMPLAT_OFST (27)
-+#define RG_SSUSB_TFIFO_PSEL_OFST (24)
-+#define RG_SSUSB_CKGEN_PSEL_OFST (8)
-+#define RG_SSUSB_RXCK_INV_OFST (0)
-+
-+//U3D_PHYD_MIX5
-+#define RG_SSUSB_PRB_SEL_OFST (16)
-+#define RG_SSUSB_RXPLL_STBCYC_OFST (0)
-+
-+//U3D_PHYD_RESERVED
-+#define RG_SSUSB_PHYD_RESERVE_OFST (0)
-+//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11)
-+//#define RG_SSUSB_RX_SIGDET_EN_OFST (12)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9)
-+//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10)
-+
-+//U3D_PHYD_CDR0
-+#define RG_SSUSB_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_PHYD_CDR1
-+#define RG_SSUSB_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_CDR_BW_SEL_OFST (6)
-+#define RG_SSUSB_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_PHYD_PLL_0
-+#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28)
-+#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27)
-+#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26)
-+#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25)
-+#define RG_SSUSB_P_EQ_T_SEL_OFST (15)
-+#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5)
-+#define RG_SSUSB_PLLBAND_RECAL_OFST (4)
-+#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3)
-+#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2)
-+#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1)
-+#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0)
-+
-+//U3D_PHYD_PLL_1
-+#define RG_SSUSB_CDR_BAND_5G_OFST (24)
-+#define RG_SSUSB_CDR_BAND_2P5G_OFST (16)
-+#define RG_SSUSB_PLL_BAND_5G_OFST (8)
-+#define RG_SSUSB_PLL_BAND_2P5G_OFST (0)
-+
-+//U3D_PHYD_BCN_DET_1
-+#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16)
-+#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0)
-+
-+//U3D_PHYD_BCN_DET_2
-+#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16)
-+#define RG_SSUSB_BCN_DET_DIS_OFST (12)
-+#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0)
-+
-+//U3D_EQ0
-+#define RG_SSUSB_EQ_DLHL_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DHHL_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0)
-+
-+//U3D_EQ1
-+#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0)
-+
-+//U3D_EQ2
-+#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24)
-+#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_STOPTIME_OFST (14)
-+#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11)
-+#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8)
-+#define RG_SSUSB_EQ_STARTTIME_OFST (6)
-+#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3)
-+#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0)
-+
-+//U3D_EQ3
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28)
-+#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24)
-+#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16)
-+#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7)
-+#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0)
-+
-+//U3D_EQ_EYE0
-+#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25)
-+#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24)
-+#define RG_SSUSB_EQ_EYE0_Y_OFST (16)
-+#define RG_SSUSB_EQ_EYE1_Y_OFST (8)
-+#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7)
-+#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4)
-+#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3)
-+
-+//U3D_EQ_EYE1
-+#define RG_SSUSB_EQ_SIGDET_OFST (24)
-+#define RG_SSUSB_EQ_EYE_MASK_OFST (7)
-+
-+//U3D_EQ_EYE2
-+#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31)
-+#define RG_SSUSB_EQ_SD_CNT1_OFST (24)
-+#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22)
-+#define RG_SSUSB_EQ_SD_CNT0_OFST (16)
-+
-+//U3D_EQ_DFE0
-+#define RG_SSUSB_EQ_LEQMAX_OFST (28)
-+#define RG_SSUSB_EQ_DFEX_EN_OFST (27)
-+#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24)
-+#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23)
-+#define RG_SSUSB_EQ_PIEYE_INI_OFST (16)
-+#define RG_SSUSB_EQ_PI90_INI_OFST (8)
-+#define RG_SSUSB_EQ_PI0_INI_OFST (0)
-+
-+//U3D_EQ_DFE1
-+#define RG_SSUSB_EQ_REV_OFST (16)
-+#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12)
-+#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8)
-+#define RG_SSUSB_EQ_DFEX_RST_OFST (7)
-+#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6)
-+#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4)
-+#define RG_SSUSB_EQ_DFEX_DIS_OFST (2)
-+#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1)
-+#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0)
-+
-+//U3D_EQ_DFE2
-+#define RG_SSUSB_EQ_MON_SEL_OFST (24)
-+#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16)
-+#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8)
-+#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0)
-+
-+//U3D_EQ_DFE3
-+#define RG_SSUSB_EQ_RESERVED_OFST (0)
-+
-+//U3D_PHYD_MON0
-+#define RGS_SSUSB_BERT_BERC_OFST (16)
-+#define RGS_SSUSB_LFPS_OFST (12)
-+#define RGS_SSUSB_TRAINDEC_OFST (8)
-+#define RGS_SSUSB_SCP_PAT_OFST (0)
-+
-+//U3D_PHYD_MON1
-+#define RGS_SSUSB_RX_FL_OUT_OFST (0)
-+
-+//U3D_PHYD_MON2
-+#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16)
-+#define RGS_SSUSB_RETRACK_OFST (12)
-+#define RGS_SSUSB_RXPLL_LOCK_OFST (10)
-+#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9)
-+#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8)
-+#define RGS_SSUSB_PDNCTL_OFST (0)
-+
-+//U3D_PHYD_MON3
-+#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16)
-+#define RGS_SSUSB_PRBS_ERRCNT_OFST (0)
-+
-+//U3D_PHYD_MON4
-+#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24)
-+#define RGS_SSUSB_SCP_DETCNT_OFST (16)
-+#define RGS_SSUSB_TSEQ_DETCNT_OFST (0)
-+
-+//U3D_PHYD_MON5
-+#define RGS_SSUSB_EBUFMSG_OFST (16)
-+#define RGS_SSUSB_BERT_LOCK_OFST (15)
-+#define RGS_SSUSB_SCP_DET_OFST (14)
-+#define RGS_SSUSB_TSEQ_DET_OFST (13)
-+#define RGS_SSUSB_EBUF_UDF_OFST (12)
-+#define RGS_SSUSB_EBUF_OVF_OFST (11)
-+#define RGS_SSUSB_PRBS_PASSTH_OFST (10)
-+#define RGS_SSUSB_PRBS_PASS_OFST (9)
-+#define RGS_SSUSB_PRBS_LOCK_OFST (8)
-+#define RGS_SSUSB_T2RLB_ERR_OFST (6)
-+#define RGS_SSUSB_T2RLB_PASSTH_OFST (5)
-+#define RGS_SSUSB_T2RLB_PASS_OFST (4)
-+#define RGS_SSUSB_T2RLB_LOCK_OFST (3)
-+#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2)
-+#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1)
-+#define RGS_SSUSB_RXDETECTED_OFST (0)
-+
-+//U3D_PHYD_MON6
-+#define RGS_SSUSB_SIGCAL_DONE_OFST (30)
-+#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29)
-+#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24)
-+#define RGS_SSUSB_RX_IMP_SEL_OFST (16)
-+#define RGS_SSUSB_TX_IMP_SEL_OFST (8)
-+#define RGS_SSUSB_TFIFO_MSG_OFST (4)
-+#define RGS_SSUSB_RFIFO_MSG_OFST (0)
-+
-+//U3D_PHYD_MON7
-+#define RGS_SSUSB_FT_OUT_OFST (8)
-+#define RGS_SSUSB_PRB_OUT_OFST (0)
-+
-+//U3D_PHYA_RX_MON0
-+#define RGS_SSUSB_EQ_DCLEQ_OFST (24)
-+#define RGS_SSUSB_EQ_DCD0H_OFST (16)
-+#define RGS_SSUSB_EQ_DCD0L_OFST (8)
-+#define RGS_SSUSB_EQ_DCD1H_OFST (0)
-+
-+//U3D_PHYA_RX_MON1
-+#define RGS_SSUSB_EQ_DCD1L_OFST (24)
-+#define RGS_SSUSB_EQ_DCE0_OFST (16)
-+#define RGS_SSUSB_EQ_DCE1_OFST (8)
-+#define RGS_SSUSB_EQ_DCHHL_OFST (0)
-+
-+//U3D_PHYA_RX_MON2
-+#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31)
-+#define RGS_SSUSB_EQ_DCLHL_OFST (24)
-+#define RGS_SSUSB_EQ_STATUS_OFST (16)
-+#define RGS_SSUSB_EQ_DCEYE0_OFST (8)
-+#define RGS_SSUSB_EQ_DCEYE1_OFST (0)
-+
-+//U3D_PHYA_RX_MON3
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0)
-+
-+//U3D_PHYA_RX_MON4
-+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0)
-+
-+//U3D_PHYA_RX_MON5
-+#define RGS_SSUSB_EQ_DCLEQOS_OFST (8)
-+#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7)
-+#define RGS_SSUSB_EQ_PILPO_OFST (0)
-+
-+//U3D_PHYD_CPPAT2
-+#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16)
-+#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8)
-+#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0)
-+
-+//U3D_EQ_EYE3
-+#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24)
-+#define RG_SSUSB_EQ_EYE_CNT_OFST (0)
-+
-+//U3D_KBAND_OUT
-+#define RGS_SSUSB_CDR_BAND_5G_OFST (24)
-+#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16)
-+#define RGS_SSUSB_PLL_BAND_5G_OFST (8)
-+#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0)
-+
-+//U3D_KBAND_OUT1
-+#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24)
-+#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16)
-+#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8)
-+#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct u3phyd_bank2_reg {
-+ //0x0
-+ PHY_LE32 b2_phyd_top1;
-+ PHY_LE32 b2_phyd_top2;
-+ PHY_LE32 b2_phyd_top3;
-+ PHY_LE32 b2_phyd_top4;
-+ //0x10
-+ PHY_LE32 b2_phyd_top5;
-+ PHY_LE32 b2_phyd_top6;
-+ PHY_LE32 b2_phyd_top7;
-+ PHY_LE32 b2_phyd_p_sigdet1;
-+ //0x20
-+ PHY_LE32 b2_phyd_p_sigdet2;
-+ PHY_LE32 b2_phyd_p_sigdet_cal1;
-+ PHY_LE32 b2_phyd_rxdet1;
-+ PHY_LE32 b2_phyd_rxdet2;
-+ //0x30
-+ PHY_LE32 b2_phyd_misc0;
-+ PHY_LE32 b2_phyd_misc2;
-+ PHY_LE32 b2_phyd_misc3;
-+ PHY_LE32 reserve0;
-+ //0x40
-+ PHY_LE32 b2_rosc_0;
-+ PHY_LE32 b2_rosc_1;
-+ PHY_LE32 b2_rosc_2;
-+ PHY_LE32 b2_rosc_3;
-+ //0x50
-+ PHY_LE32 b2_rosc_4;
-+ PHY_LE32 b2_rosc_5;
-+ PHY_LE32 b2_rosc_6;
-+ PHY_LE32 b2_rosc_7;
-+ //0x60
-+ PHY_LE32 b2_rosc_8;
-+ PHY_LE32 b2_rosc_9;
-+ PHY_LE32 b2_rosc_a;
-+ PHY_LE32 reserve1;
-+ //0x70~0xd0
-+ PHY_LE32 reserve2[28];
-+ //0xe0
-+ PHY_LE32 phyd_version;
-+ PHY_LE32 phyd_model;
-+};
-+
-+//U3D_B2_PHYD_TOP1
-+#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28
-+#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24
-+#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17
-+#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16
-+#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15
-+#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14
-+#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12
-+#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11
-+#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10
-+#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9
-+#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8
-+#define RG_SSUSB_RATE (0x1<<6) //6:6
-+#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5
-+#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4
-+#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3
-+#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1
-+#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_TOP2
-+#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30
-+#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24
-+#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22
-+#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16
-+#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14
-+#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8
-+#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6
-+#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0
-+
-+//U3D_B2_PHYD_TOP3
-+#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25
-+#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24
-+#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16
-+#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13
-+#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8
-+#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0
-+
-+//U3D_B2_PHYD_TOP4
-+#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_B2_PHYD_TOP5
-+#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_B2_PHYD_TOP6
-+#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28
-+#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24
-+#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16
-+#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8
-+#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0
-+
-+//U3D_B2_PHYD_TOP7
-+#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24
-+#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16
-+#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8
-+#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0
-+
-+//U3D_B2_PHYD_P_SIGDET1
-+#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31
-+#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24
-+#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16
-+#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8
-+#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0
-+
-+//U3D_B2_PHYD_P_SIGDET2
-+#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29
-+#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28
-+#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24
-+#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16
-+#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10
-+#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8
-+#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6
-+#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5
-+#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4
-+#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2
-+#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0
-+
-+//U3D_B2_PHYD_P_SIGDET_CAL1
-+#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16
-+#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3
-+#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2
-+#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1
-+#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_RXDET1
-+#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31
-+#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30
-+#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29
-+#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28
-+#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27
-+#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18
-+#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9
-+#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0
-+
-+//U3D_B2_PHYD_RXDET2
-+#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31
-+#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30
-+#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29
-+#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18
-+#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9
-+#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0
-+
-+//U3D_B2_PHYD_MISC0
-+#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22
-+#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21
-+#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20
-+#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16
-+#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15
-+#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14
-+#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13
-+#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12
-+#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11
-+#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10
-+#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8
-+#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5
-+#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4
-+#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2
-+#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1
-+#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_MISC2
-+#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31
-+#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27
-+#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26
-+#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25
-+#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24
-+#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23
-+#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22
-+#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13
-+#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7
-+#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1
-+#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0
-+
-+//U3D_B2_PHYD_MISC3
-+#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16
-+#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_0
-+#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23
-+#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16
-+#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3
-+#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2
-+#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1
-+#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_1
-+#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20
-+#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19
-+#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17
-+#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16
-+#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8
-+#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_2
-+#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_3
-+#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_4
-+#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_5
-+#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_6
-+#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_7
-+#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16
-+#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0
-+
-+//U3D_B2_ROSC_8
-+#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16
-+#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2
-+#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1
-+#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0
-+
-+//U3D_B2_ROSC_9
-+#define RGS_FM_RING_CNT (0xffff<<16) //31:16
-+#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10
-+#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9
-+#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8
-+#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0
-+
-+//U3D_B2_ROSC_A
-+#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0
-+
-+//U3D_PHYD_VERSION
-+#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0
-+
-+//U3D_PHYD_MODEL
-+#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_B2_PHYD_TOP1
-+#define RG_SSUSB_PCIE2_K_EMP_OFST (28)
-+#define RG_SSUSB_PCIE2_K_FUL_OFST (24)
-+#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17)
-+#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16)
-+#define RG_SSUSB_SIGDET_EN_OFST (15)
-+#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14)
-+#define RG_SSUSB_CLKRX_EN_OFST (13)
-+#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12)
-+#define RG_SSUSB_CLKTX_EN_OFST (11)
-+#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10)
-+#define RG_SSUSB_CLK_REQ_N_I_OFST (9)
-+#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8)
-+#define RG_SSUSB_RATE_OFST (6)
-+#define RG_SSUSB_FORCE_RATE_OFST (5)
-+#define RG_SSUSB_PCIE_MODE_SEL_OFST (4)
-+#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3)
-+#define RG_SSUSB_PHY_MODE_OFST (1)
-+#define RG_SSUSB_FORCE_PHY_MODE_OFST (0)
-+
-+//U3D_B2_PHYD_TOP2
-+#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30)
-+#define RG_SSUSB_IDRV_6DB_OFST (24)
-+#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22)
-+#define RG_SSUSB_IDEM_3P5DB_OFST (16)
-+#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14)
-+#define RG_SSUSB_IDRV_3P5DB_OFST (8)
-+#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6)
-+#define RG_SSUSB_IDRV_0DB_OFST (0)
-+
-+//U3D_B2_PHYD_TOP3
-+#define RG_SSUSB_TX_BIASI_OFST (25)
-+#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24)
-+#define RG_SSUSB_TX_BIASI_EN_OFST (16)
-+#define RG_SSUSB_FORCE_TX_BIASI_OFST (13)
-+#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8)
-+#define RG_SSUSB_IDEM_6DB_OFST (0)
-+
-+//U3D_B2_PHYD_TOP4
-+#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_B2_PHYD_TOP5
-+#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_B2_PHYD_TOP6
-+#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28)
-+#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24)
-+#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16)
-+#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8)
-+#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0)
-+
-+//U3D_B2_PHYD_TOP7
-+#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24)
-+#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16)
-+#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8)
-+#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET1
-+#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31)
-+#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24)
-+#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16)
-+#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8)
-+#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET2
-+#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29)
-+#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28)
-+#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27)
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25)
-+#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24)
-+#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16)
-+#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10)
-+#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8)
-+#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6)
-+#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5)
-+#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4)
-+#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2)
-+#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0)
-+
-+//U3D_B2_PHYD_P_SIGDET_CAL1
-+#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24)
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16)
-+#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8)
-+#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3)
-+#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2)
-+#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1)
-+#define RG_SSUSB_P_SIGDET_REK_OFST (0)
-+
-+//U3D_B2_PHYD_RXDET1
-+#define RG_SSUSB_RXDET_PRB_SEL_OFST (31)
-+#define RG_SSUSB_FORCE_CMDET_OFST (30)
-+#define RG_SSUSB_RXDET_EN_OFST (29)
-+#define RG_SSUSB_FORCE_RXDET_EN_OFST (28)
-+#define RG_SSUSB_RXDET_K_TWICE_OFST (27)
-+#define RG_SSUSB_RXDET_STB3_SET_OFST (18)
-+#define RG_SSUSB_RXDET_STB2_SET_OFST (9)
-+#define RG_SSUSB_RXDET_STB1_SET_OFST (0)
-+
-+//U3D_B2_PHYD_RXDET2
-+#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31)
-+#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30)
-+#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29)
-+#define RG_SSUSB_PDN_T_SEL_OFST (18)
-+#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9)
-+#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0)
-+
-+//U3D_B2_PHYD_MISC0
-+#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22)
-+#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21)
-+#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20)
-+#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16)
-+#define RG_SSUSB_LFPS_PSEL_OFST (15)
-+#define RG_SSUSB_RX_SIGDET_EN_OFST (14)
-+#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13)
-+#define RG_SSUSB_RX_PI_CAL_EN_OFST (12)
-+#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11)
-+#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10)
-+#define RG_SSUSB_T2RLB_PSEL_OFST (8)
-+#define RG_SSUSB_PPCTL_PSEL_OFST (5)
-+#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4)
-+#define RG_SSUSB_BERTLB_PSEL_OFST (2)
-+#define RG_SSUSB_RETRACK_DIS_OFST (1)
-+#define RG_SSUSB_PPERRCNT_CLR_OFST (0)
-+
-+//U3D_B2_PHYD_MISC2
-+#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31)
-+#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27)
-+#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26)
-+#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25)
-+#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24)
-+#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23)
-+#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22)
-+#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13)
-+#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7)
-+#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1)
-+#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0)
-+
-+//U3D_B2_PHYD_MISC3
-+#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16)
-+#define RGS_SSUSB_PPERRCNT_OFST (0)
-+
-+//U3D_B2_ROSC_0
-+#define RG_SSUSB_RING_OSC_CNTEND_OFST (23)
-+#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16)
-+#define RG_SSUSB_RING_OSC_EN_OFST (3)
-+#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2)
-+#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1)
-+#define RG_SSUSB_RING_BYPASS_DET_OFST (0)
-+
-+//U3D_B2_ROSC_1
-+#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20)
-+#define RG_SSUSB_RING_OSC_P3_OFST (19)
-+#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17)
-+#define RG_SSUSB_RING_OSC_RECAL_OFST (16)
-+#define RG_SSUSB_RING_OSC_SEL_OFST (8)
-+#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0)
-+
-+//U3D_B2_ROSC_2
-+#define RG_SSUSB_RING_DET_STRCYC2_OFST (16)
-+#define RG_SSUSB_RING_DET_STRCYC1_OFST (0)
-+
-+//U3D_B2_ROSC_3
-+#define RG_SSUSB_RING_DET_DETWIN1_OFST (16)
-+#define RG_SSUSB_RING_DET_STRCYC3_OFST (0)
-+
-+//U3D_B2_ROSC_4
-+#define RG_SSUSB_RING_DET_DETWIN3_OFST (16)
-+#define RG_SSUSB_RING_DET_DETWIN2_OFST (0)
-+
-+//U3D_B2_ROSC_5
-+#define RG_SSUSB_RING_DET_LBOND1_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND1_OFST (0)
-+
-+//U3D_B2_ROSC_6
-+#define RG_SSUSB_RING_DET_LBOND2_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND2_OFST (0)
-+
-+//U3D_B2_ROSC_7
-+#define RG_SSUSB_RING_DET_LBOND3_OFST (16)
-+#define RG_SSUSB_RING_DET_UBOND3_OFST (0)
-+
-+//U3D_B2_ROSC_8
-+#define RG_SSUSB_RING_RESERVE_OFST (16)
-+#define RG_SSUSB_ROSC_PROB_SEL_OFST (2)
-+#define RG_SSUSB_RING_FREQMETER_EN_OFST (1)
-+#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0)
-+
-+//U3D_B2_ROSC_9
-+#define RGS_FM_RING_CNT_OFST (16)
-+#define RGS_SSUSB_RING_OSC_STATE_OFST (10)
-+#define RGS_SSUSB_RING_OSC_STABLE_OFST (9)
-+#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8)
-+#define RGS_SSUSB_RING_OSC_CAL_OFST (0)
-+
-+//U3D_B2_ROSC_A
-+#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0)
-+
-+//U3D_PHYD_VERSION
-+#define RGS_SSUSB_PHYD_VERSION_OFST (0)
-+
-+//U3D_PHYD_MODEL
-+#define RGS_SSUSB_PHYD_MODEL_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct sifslv_chip_reg {
-+ PHY_LE32 xtalbias;
-+ PHY_LE32 syspll1;
-+ PHY_LE32 gpio_ctla;
-+ PHY_LE32 gpio_ctlb;
-+ PHY_LE32 gpio_ctlc;
-+};
-+
-+//U3D_GPIO_CTLA
-+#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0
-+
-+//U3D_GPIO_CTLB
-+#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0
-+
-+//U3D_GPIO_CTLC
-+#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0
-+
-+/* OFFSET */
-+
-+//U3D_GPIO_CTLA
-+#define RG_C60802_GPIO_CTLA_OFST (0)
-+
-+//U3D_GPIO_CTLB
-+#define RG_C60802_GPIO_CTLB_OFST (0)
-+
-+//U3D_GPIO_CTLC
-+#define RG_C60802_GPIO_CTLC_OFST (0)
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+struct sifslv_fm_feg {
-+ //0x0
-+ PHY_LE32 fmcr0;
-+ PHY_LE32 fmcr1;
-+ PHY_LE32 fmcr2;
-+ PHY_LE32 fmmonr0;
-+ //0x10
-+ PHY_LE32 fmmonr1;
-+};
-+
-+//U3D_FMCR0
-+#define RG_LOCKTH (0xf<<28) //31:28
-+#define RG_MONCLK_SEL (0x3<<26) //27:26
-+#define RG_FM_MODE (0x1<<25) //25:25
-+#define RG_FREQDET_EN (0x1<<24) //24:24
-+#define RG_CYCLECNT (0xffffff<<0) //23:0
-+
-+//U3D_FMCR1
-+#define RG_TARGET (0xffffffff<<0) //31:0
-+
-+//U3D_FMCR2
-+#define RG_OFFSET (0xffffffff<<0) //31:0
-+
-+//U3D_FMMONR0
-+#define USB_FM_OUT (0xffffffff<<0) //31:0
-+
-+//U3D_FMMONR1
-+#define RG_MONCLK_SEL_3 (0x1<<9) //9:9
-+#define RG_FRCK_EN (0x1<<8) //8:8
-+#define USBPLL_LOCK (0x1<<1) //1:1
-+#define USB_FM_VLD (0x1<<0) //0:0
-+
-+
-+/* OFFSET */
-+
-+//U3D_FMCR0
-+#define RG_LOCKTH_OFST (28)
-+#define RG_MONCLK_SEL_OFST (26)
-+#define RG_FM_MODE_OFST (25)
-+#define RG_FREQDET_EN_OFST (24)
-+#define RG_CYCLECNT_OFST (0)
-+
-+//U3D_FMCR1
-+#define RG_TARGET_OFST (0)
-+
-+//U3D_FMCR2
-+#define RG_OFFSET_OFST (0)
-+
-+//U3D_FMMONR0
-+#define USB_FM_OUT_OFST (0)
-+
-+//U3D_FMMONR1
-+#define RG_MONCLK_SEL_3_OFST (9)
-+#define RG_FRCK_EN_OFST (8)
-+#define USBPLL_LOCK_OFST (1)
-+#define USB_FM_VLD_OFST (0)
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+PHY_INT32 phy_init(struct u3phy_info *info);
-+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
-+PHY_INT32 eyescan_init(struct u3phy_info *info);
-+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
-+ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
-+PHY_INT32 u2_save_cur_en(struct u3phy_info *info);
-+PHY_INT32 u2_save_cur_re(struct u3phy_info *info);
-+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info);
-+
-+#endif
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy-ahb.c
-@@ -0,0 +1,58 @@
-+#include "mtk-phy.h"
-+#ifdef CONFIG_U3D_HAL_SUPPORT
-+#include "mu3d_hal_osal.h"
-+#endif
-+
-+#ifdef CONFIG_U3_PHY_AHB_SUPPORT
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+
-+#ifndef CONFIG_U3D_HAL_SUPPORT
-+#define os_writel(addr,data) {\
-+ (*((volatile PHY_UINT32*)(addr)) = data);\
-+ }
-+#define os_readl(addr) *((volatile PHY_UINT32*)(addr))
-+#define os_writelmsk(addr, data, msk) \
-+ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \
-+ }
-+#define os_setmsk(addr, msk) \
-+ { os_writel(addr, os_readl(addr) | msk); \
-+ }
-+#define os_clrmsk(addr, msk) \
-+ { os_writel(addr, os_readl(addr) &~ msk); \
-+ }
-+/*msk the data first, then umsk with the umsk.*/
-+#define os_writelmskumsk(addr, data, msk, umsk) \
-+{\
-+ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\
-+}
-+
-+#endif
-+
-+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data)
-+{
-+ os_writel(addr, data);
-+
-+ return 0;
-+}
-+
-+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr)
-+{
-+ return os_readl(addr);
-+}
-+
-+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data)
-+{
-+ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8));
-+
-+ return 0;
-+}
-+
-+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr)
-+{
-+ return ((os_readl(addr)>>((addr%4)*8))&0xff);
-+}
-+
-+#endif
-+
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy.c
-@@ -0,0 +1,102 @@
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#define U3_PHY_LIB
-+#include "mtk-phy.h"
-+#ifdef CONFIG_PROJECT_7621
-+#include "mtk-phy-7621.h"
-+#endif
-+#ifdef CONFIG_PROJECT_PHY
-+static struct u3phy_operator project_operators = {
-+ .init = phy_init,
-+ .change_pipe_phase = phy_change_pipe_phase,
-+ .eyescan_init = eyescan_init,
-+ .eyescan = phy_eyescan,
-+ .u2_slew_rate_calibration = u2_slew_rate_calibration,
-+};
-+#endif
-+
-+
-+PHY_INT32 u3phy_init(){
-+#ifndef CONFIG_PROJECT_PHY
-+ PHY_INT32 u3phy_version;
-+#endif
-+
-+ if(u3phy != NULL){
-+ return PHY_TRUE;
-+ }
-+
-+ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
-+#endif
-+#ifdef CONFIG_U3_PHY_GPIO_SUPPORT
-+ u3phy->phyd_version_addr = 0x2000e4;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->phyd_version_addr = 0x2000e4;
-+#endif
-+#else
-+ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4;
-+#endif
-+#endif
-+
-+#ifdef CONFIG_PROJECT_PHY
-+
-+ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE;
-+ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE;
-+ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE;
-+ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE;
-+ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE;
-+ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
-+ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
-+ u3phy_ops = &project_operators;
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1;
-+ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1;
-+ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1;
-+ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1;
-+ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1;
-+ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
-+ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
-+#endif
-+#endif
-+
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
-+ PHY_INT8 cur_value;
-+ PHY_INT8 new_value;
-+
-+ cur_value = U3PhyReadReg8(addr);
-+ new_value = (cur_value & (~mask)) | (value << offset);
-+ //udelay(i2cdelayus);
-+ U3PhyWriteReg8(addr, new_value);
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
-+ PHY_INT32 cur_value;
-+ PHY_INT32 new_value;
-+
-+ cur_value = U3PhyReadReg32(addr);
-+ new_value = (cur_value & (~mask)) | ((value << offset) & mask);
-+ U3PhyWriteReg32(addr, new_value);
-+ //DRV_MDELAY(100);
-+
-+ return PHY_TRUE;
-+}
-+
-+PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){
-+
-+ return ((U3PhyReadReg8(addr) & mask) >> offset);
-+}
-+
-+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){
-+
-+ return ((U3PhyReadReg32(addr) & mask) >> offset);
-+}
-+
---- /dev/null
-+++ b/drivers/usb/host/mtk-phy.h
-@@ -0,0 +1,179 @@
-+#ifndef __MTK_PHY_NEW_H
-+#define __MTK_PHY_NEW_H
-+
-+//#define CONFIG_U3D_HAL_SUPPORT
-+
-+/* include system library */
-+#include <linux/gfp.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+/* Choose PHY R/W implementation */
-+//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO
-+#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC
-+
-+/* Choose PHY version */
-+//Select your project by defining one of the followings
-+#define CONFIG_PROJECT_7621 //7621
-+#define CONFIG_PROJECT_PHY
-+
-+/* BASE ADDRESS DEFINE, should define this on ASIC */
-+#define PHY_BASE 0xBE1D0000
-+#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100)
-+#define SIFSLV_CHIP_BASE (PHY_BASE+0x700)
-+#define U2_PHY_BASE (PHY_BASE+0x800)
-+#define U3_PHYD_BASE (PHY_BASE+0x900)
-+#define U3_PHYD_B2_BASE (PHY_BASE+0xa00)
-+#define U3_PHYA_BASE (PHY_BASE+0xb00)
-+#define U3_PHYA_DA_BASE (PHY_BASE+0xc00)
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100)
-+#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700)
-+#define U2_PHY_BASE_P1 (PHY_BASE+0x1000)
-+#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100)
-+#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200)
-+#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300)
-+#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400)
-+#endif
-+
-+/*
-+
-+0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg
-+0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc
-+0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28
-+0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28
-+0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28
-+0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28
-+0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28
-+*/
-+
-+
-+/* TYPE DEFINE */
-+typedef unsigned int PHY_UINT32;
-+typedef int PHY_INT32;
-+typedef unsigned short PHY_UINT16;
-+typedef short PHY_INT16;
-+typedef unsigned char PHY_UINT8;
-+typedef char PHY_INT8;
-+
-+typedef PHY_UINT32 __bitwise PHY_LE32;
-+
-+/* CONSTANT DEFINE */
-+#define PHY_FALSE 0
-+#define PHY_TRUE 1
-+
-+/* MACRO DEFINE */
-+#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
-+#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr))
-+
-+#define DRV_MDELAY mdelay
-+#define DRV_MSLEEP msleep
-+#define DRV_UDELAY udelay
-+#define DRV_USLEEP usleep
-+
-+/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
-+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
-+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
-+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
-+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
-+
-+/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
-+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
-+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
-+PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
-+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
-+
-+struct u3phy_info {
-+ PHY_INT32 phy_version;
-+ PHY_INT32 phyd_version_addr;
-+
-+#ifdef CONFIG_PROJECT_PHY
-+ struct u2phy_reg *u2phy_regs;
-+ struct u3phya_reg *u3phya_regs;
-+ struct u3phya_da_reg *u3phya_da_regs;
-+ struct u3phyd_reg *u3phyd_regs;
-+ struct u3phyd_bank2_reg *u3phyd_bank2_regs;
-+ struct sifslv_chip_reg *sifslv_chip_regs;
-+ struct sifslv_fm_feg *sifslv_fm_regs;
-+#endif
-+};
-+
-+struct u3phy_operator {
-+ PHY_INT32 (*init) (struct u3phy_info *info);
-+ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
-+ PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
-+ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
-+ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
-+ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
-+ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
-+};
-+
-+#ifdef U3_PHY_LIB
-+#define AUTOEXT
-+#else
-+#define AUTOEXT extern
-+#endif
-+
-+AUTOEXT struct u3phy_info *u3phy;
-+AUTOEXT struct u3phy_info *u3phy_p1;
-+AUTOEXT struct u3phy_operator *u3phy_ops;
-+
-+/*********eye scan required*********/
-+
-+#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF))
-+#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8))
-+
-+typedef enum
-+{
-+ SCAN_UP,
-+ SCAN_DN
-+} enumScanDir;
-+
-+struct strucScanRegion
-+{
-+ PHY_INT8 bX_tl;
-+ PHY_INT8 bY_tl;
-+ PHY_INT8 bX_br;
-+ PHY_INT8 bY_br;
-+ PHY_INT8 bDeltaX;
-+ PHY_INT8 bDeltaY;
-+};
-+
-+struct strucTestCycle
-+{
-+ PHY_UINT16 wEyeCnt;
-+ PHY_INT8 bNumOfEyeCnt;
-+ PHY_INT8 bPICalEn;
-+ PHY_INT8 bNumOfIgnoreCnt;
-+};
-+
-+#define ERRCNT_MAX 128
-+#define CYCLE_COUNT_MAX 15
-+
-+/// the map resolution is 128 x 128 pts
-+#define MAX_X 127
-+#define MAX_Y 127
-+#define MIN_X 0
-+#define MIN_Y 0
-+
-+PHY_INT32 u3phy_init(void);
-+
-+AUTOEXT struct strucScanRegion _rEye1;
-+AUTOEXT struct strucScanRegion _rEye2;
-+AUTOEXT struct strucTestCycle _rTestCycle;
-+AUTOEXT PHY_UINT8 _bXcurr;
-+AUTOEXT PHY_UINT8 _bYcurr;
-+AUTOEXT enumScanDir _eScanDir;
-+AUTOEXT PHY_INT8 _fgXChged;
-+AUTOEXT PHY_INT8 _bPIResult;
-+/* use local variable instead to save memory use */
-+#if 0
-+AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
-+#endif
-+
-+/***********************************/
-+#endif
-+
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -1,7 +1,7 @@
- #ifndef __LINUX_USB_PCI_QUIRKS_H
- #define __LINUX_USB_PCI_QUIRKS_H
-
--#ifdef CONFIG_PCI
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
- #endif /* CONFIG_PCI */
---- a/drivers/usb/host/xhci-dbg.c
-+++ b/drivers/usb/host/xhci-dbg.c
-@@ -21,6 +21,9 @@
- */
-
- #include "xhci.h"
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#include "xhci-mtk.h"
-+#endif
-
- #define XHCI_INIT_VALUE 0x0
-
---- a/drivers/usb/host/xhci-mem.c
-+++ b/drivers/usb/host/xhci-mem.c
-@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment
-
- static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
- {
-+ if (!seg)
-+ return;
-+
- if (seg->trbs) {
- dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
- seg->trbs = NULL;
-@@ -1471,9 +1474,17 @@ int xhci_endpoint_init(struct xhci_hcd *
- max_burst = (usb_endpoint_maxp(&ep->desc)
- & 0x1800) >> 11;
- }
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
-+ max_packet += 2;
-+#endif
- break;
- case USB_SPEED_FULL:
- case USB_SPEED_LOW:
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
-+ max_packet += 2;
-+#endif
- break;
- default:
- BUG();
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk-power.c
-@@ -0,0 +1,115 @@
-+#include "xhci-mtk.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci.h"
-+#include <linux/kernel.h> /* printk() */
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+static int g_num_u3_port;
-+static int g_num_u2_port;
-+
-+
-+void enableXhciAllPortPower(struct xhci_hcd *xhci){
-+ int i;
-+ u32 port_id, temp;
-+ u32 __iomem *addr;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ for(i=1; i<=g_num_u3_port; i++){
-+ port_id=i;
-+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
-+ temp = readl(addr);
-+ temp = xhci_port_state_to_neutral(temp);
-+ temp |= PORT_POWER;
-+ writel(temp, addr);
-+ }
-+ for(i=1; i<=g_num_u2_port; i++){
-+ port_id=i+g_num_u3_port;
-+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
-+ temp = readl(addr);
-+ temp = xhci_port_state_to_neutral(temp);
-+ temp |= PORT_POWER;
-+ writel(temp, addr);
-+ }
-+}
-+
-+void enableAllClockPower(){
-+
-+ int i;
-+ u32 temp;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ //2. Enable xHC
-+ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
-+ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
-+ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+
-+ //1. Enable target ports
-+ for(i=0; i<g_num_u3_port; i++){
-+ temp = readl(SSUSB_U3_CTRL(i));
-+ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
-+ writel(temp, SSUSB_U3_CTRL(i));
-+ }
-+ for(i=0; i<g_num_u2_port; i++){
-+ temp = readl(SSUSB_U2_CTRL(i));
-+ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
-+ writel(temp, SSUSB_U2_CTRL(i));
-+ }
-+ msleep(100);
-+}
-+
-+
-+//(X)disable clock/power of a port
-+//(X)if all ports are disabled, disable IP ctrl power
-+//disable all ports and IP clock/power, this is just mention HW that the power/clock of port
-+//and IP could be disable if suspended.
-+//If doesn't not disable all ports at first, the IP clock/power will never be disabled
-+//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
-+//port_index: port number
-+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
-+void disablePortClockPower(void){
-+ int i;
-+ u32 temp;
-+
-+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
-+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
-+
-+ for(i=0; i<g_num_u3_port; i++){
-+ temp = readl(SSUSB_U3_CTRL(i));
-+ temp = temp | (SSUSB_U3_PORT_PDN);
-+ writel(temp, SSUSB_U3_CTRL(i));
-+ }
-+ for(i=0; i<g_num_u2_port; i++){
-+ temp = readl(SSUSB_U2_CTRL(i));
-+ temp = temp | (SSUSB_U2_PORT_PDN);
-+ writel(temp, SSUSB_U2_CTRL(i));
-+ }
-+ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+}
-+
-+//if IP ctrl power is disabled, enable it
-+//enable clock/power of a port
-+//port_index: port number
-+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
-+void enablePortClockPower(int port_index, int port_rev){
-+ int i;
-+ u32 temp;
-+
-+ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
-+
-+ if(port_rev == 0x3){
-+ temp = readl(SSUSB_U3_CTRL(port_index));
-+ temp = temp & (~SSUSB_U3_PORT_PDN);
-+ writel(temp, SSUSB_U3_CTRL(port_index));
-+ }
-+ else if(port_rev == 0x2){
-+ temp = readl(SSUSB_U2_CTRL(port_index));
-+ temp = temp & (~SSUSB_U2_PORT_PDN);
-+ writel(temp, SSUSB_U2_CTRL(port_index));
-+ }
-+}
-+
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk-power.h
-@@ -0,0 +1,13 @@
-+#ifndef _XHCI_MTK_POWER_H
-+#define _XHCI_MTK_POWER_H
-+
-+#include <linux/usb.h>
-+#include "xhci.h"
-+#include "xhci-mtk.h"
-+
-+void enableXhciAllPortPower(struct xhci_hcd *xhci);
-+void enableAllClockPower(void);
-+void disablePortClockPower(void);
-+void enablePortClockPower(int port_index, int port_rev);
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk-scheduler.c
-@@ -0,0 +1,608 @@
-+#include "xhci-mtk-scheduler.h"
-+#include <linux/kernel.h> /* printk() */
-+
-+static struct sch_ep **ss_out_eps[MAX_EP_NUM];
-+static struct sch_ep **ss_in_eps[MAX_EP_NUM];
-+static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc
-+static struct sch_ep **tt_intr_eps[MAX_EP_NUM];
-+
-+
-+int mtk_xhci_scheduler_init(void){
-+ int i;
-+
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ ss_out_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ ss_in_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ hs_eps[i] = NULL;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ tt_intr_eps[i] = NULL;
-+ }
-+ return 0;
-+}
-+
-+int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode
-+ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){
-+
-+ struct sch_ep **ep_array;
-+ int i;
-+
-+ if(is_in && dev_speed == USB_SPEED_SUPER ){
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else if(dev_speed == USB_SPEED_SUPER){
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){
-+ ep_array = (struct sch_ep **)hs_eps;
-+ }
-+ else{
-+ ep_array = (struct sch_ep **)tt_intr_eps;
-+ }
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ if(ep_array[i] == NULL){
-+ tmp_ep->dev_speed = dev_speed;
-+ tmp_ep->isTT = isTT;
-+ tmp_ep->is_in = is_in;
-+ tmp_ep->ep_type = ep_type;
-+ tmp_ep->maxp = maxp;
-+ tmp_ep->interval = interval;
-+ tmp_ep->burst = burst;
-+ tmp_ep->mult = mult;
-+ tmp_ep->offset = offset;
-+ tmp_ep->repeat = repeat;
-+ tmp_ep->pkts = pkts;
-+ tmp_ep->cs_count = cs_count;
-+ tmp_ep->burst_mode = burst_mode;
-+ tmp_ep->bw_cost = bw_cost;
-+ tmp_ep->ep = ep;
-+ ep_array[i] = tmp_ep;
-+ return SCH_SUCCESS;
-+ }
-+ }
-+ return SCH_FAIL;
-+}
-+
-+int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat
-+ , int td_size){
-+ int i, j, k;
-+ int bw_required[3];
-+ int final_bw_required;
-+ int bw_required_per_repeat;
-+ int tmp_bw_required;
-+ struct sch_ep *cur_sch_ep;
-+ struct sch_ep **ep_array;
-+ int cur_offset;
-+ int cur_ep_offset;
-+ int tmp_offset;
-+ int tmp_interval;
-+ int ep_offset;
-+ int ep_interval;
-+ int ep_repeat;
-+ int ep_mult;
-+
-+ if(is_in){
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else{
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+
-+ bw_required[0] = 0;
-+ bw_required[1] = 0;
-+ bw_required[2] = 0;
-+
-+ if(repeat == 0){
-+ final_bw_required = 0;
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = ep_array[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_interval = cur_sch_ep->interval;
-+ ep_offset = cur_sch_ep->offset;
-+ if(cur_sch_ep->repeat == 0){
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ final_bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ else{
-+ ep_repeat = cur_sch_ep->repeat;
-+ ep_mult = cur_sch_ep->mult;
-+ for(k=0; k<=ep_mult; k++){
-+ cur_ep_offset = ep_offset+(k*ep_mult);
-+ if(ep_interval >= interval){
-+ tmp_offset = cur_ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - cur_ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ final_bw_required += cur_sch_ep->bw_cost;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ final_bw_required += td_size;
-+ }
-+ else{
-+ bw_required_per_repeat = maxp * (burst+1);
-+ for(j=0; j<=mult; j++){
-+ tmp_bw_required = 0;
-+ cur_offset = offset+(j*repeat);
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = ep_array[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_interval = cur_sch_ep->interval;
-+ ep_offset = cur_sch_ep->offset;
-+ if(cur_sch_ep->repeat == 0){
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - cur_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = cur_offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ tmp_bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ else{
-+ ep_repeat = cur_sch_ep->repeat;
-+ ep_mult = cur_sch_ep->mult;
-+ for(k=0; k<=ep_mult; k++){
-+ cur_ep_offset = ep_offset+(k*ep_repeat);
-+ if(ep_interval >= interval){
-+ tmp_offset = cur_ep_offset + ep_interval - cur_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = cur_offset + interval - cur_ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset % tmp_interval == 0){
-+ tmp_bw_required += cur_sch_ep->bw_cost;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ bw_required[j] = tmp_bw_required;
-+ }
-+ final_bw_required = SS_BW_BOUND;
-+ for(j=0; j<=mult; j++){
-+ if(bw_required[j] < final_bw_required){
-+ final_bw_required = bw_required[j];
-+ }
-+ }
-+ final_bw_required += bw_required_per_repeat;
-+ }
-+ return final_bw_required;
-+}
-+
-+int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){
-+ int i;
-+ int bw_required;
-+ struct sch_ep *cur_sch_ep;
-+ int tmp_offset;
-+ int tmp_interval;
-+ int ep_offset;
-+ int ep_interval;
-+ int cur_tt_isoc_interval; //for isoc tt check
-+
-+ bw_required = 0;
-+ for(i=0; i<MAX_EP_NUM; i++){
-+
-+ cur_sch_ep = (struct sch_ep *)hs_eps[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+
-+ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
-+ cur_tt_isoc_interval = ep_interval<<3;
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + cur_tt_isoc_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = cur_tt_isoc_interval;
-+ }
-+ if(cur_sch_ep->is_in){
-+ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
-+ bw_required += 188;
-+ }
-+ }
-+ else{
-+ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
-+ bw_required += 188;
-+ }
-+ }
-+ }
-+ else{
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset%tmp_interval == 0){
-+ bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ }
-+ bw_required += td_size;
-+ return bw_required;
-+}
-+
-+int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){
-+ char is_cs;
-+ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe;
-+ int bw_required, max_bw;
-+ int ss_cs_count;
-+ int cs_mframe;
-+ int max_frame;
-+ int i,j;
-+ struct sch_ep *cur_sch_ep;
-+ int ep_offset;
-+ int ep_interval;
-+ int ep_cs_count;
-+ int tt_isoc_interval; //for isoc tt check
-+ int cur_tt_isoc_interval; //for isoc tt check
-+ int tmp_offset;
-+ int tmp_interval;
-+
-+ is_cs = 0;
-+
-+ tt_isoc_interval = interval<<3; //frame to mframe
-+ if(is_in){
-+ is_cs = 1;
-+ }
-+ s_frame = offset/8;
-+ s_mframe = offset%8;
-+ ss_cs_count = (maxp + (188 - 1))/188;
-+ if(is_cs){
-+ cs_mframe = offset%8 + 2 + ss_cs_count;
-+ if (cs_mframe <= 6)
-+ ss_cs_count += 2;
-+ else if (cs_mframe == 7)
-+ ss_cs_count++;
-+ else if (cs_mframe > 8)
-+ return -1;
-+ }
-+ max_bw = 0;
-+ if(is_in){
-+ i=2;
-+ }
-+ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){
-+ bw_required = 0;
-+ for(j=0; j<MAX_EP_NUM; j++){
-+ cur_sch_ep = (struct sch_ep *)hs_eps[j];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
-+ //isoc tt
-+ //check if mframe offset overlap
-+ //if overlap, add 188 to the bw
-+ cur_tt_isoc_interval = ep_interval<<3;
-+ if(cur_tt_isoc_interval >= tt_isoc_interval){
-+ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe;
-+ tmp_interval = tt_isoc_interval;
-+ }
-+ else{
-+ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
-+ tmp_interval = cur_tt_isoc_interval;
-+ }
-+ if(cur_sch_ep->is_in){
-+ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
-+ bw_required += 188;
-+ }
-+ }
-+ else{
-+ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
-+ bw_required += 188;
-+ }
-+ }
-+
-+ }
-+ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){
-+ //check if mframe
-+ if(ep_interval >= tt_isoc_interval){
-+ tmp_offset = (ep_offset+ep_interval) - cur_mframe;
-+ tmp_interval = tt_isoc_interval;
-+ }
-+ else{
-+ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+ if(tmp_offset%tmp_interval == 0){
-+ bw_required += cur_sch_ep->bw_cost;
-+ }
-+ }
-+ }
-+ bw_required += 188;
-+ if(bw_required > max_bw){
-+ max_bw = bw_required;
-+ }
-+ }
-+ return max_bw;
-+}
-+
-+int count_tt_intr_bw(int interval, int frame_offset){
-+ //check all eps in tt_intr_eps
-+ int ret;
-+ int i,j;
-+ int ep_offset;
-+ int ep_interval;
-+ int tmp_offset;
-+ int tmp_interval;
-+ ret = SCH_SUCCESS;
-+ struct sch_ep *cur_sch_ep;
-+
-+ for(i=0; i<MAX_EP_NUM; i++){
-+ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i];
-+ if(cur_sch_ep == NULL){
-+ continue;
-+ }
-+ ep_offset = cur_sch_ep->offset;
-+ ep_interval = cur_sch_ep->interval;
-+ if(ep_interval >= interval){
-+ tmp_offset = ep_offset + ep_interval - frame_offset;
-+ tmp_interval = interval;
-+ }
-+ else{
-+ tmp_offset = frame_offset + interval - ep_offset;
-+ tmp_interval = ep_interval;
-+ }
-+
-+ if(tmp_offset%tmp_interval==0){
-+ return SCH_FAIL;
-+ }
-+ }
-+ return SCH_SUCCESS;
-+}
-+
-+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){
-+ int i;
-+ struct sch_ep **ep_array;
-+ struct sch_ep *cur_ep;
-+
-+ if (is_in && dev_speed == USB_SPEED_SUPER) {
-+ ep_array = (struct sch_ep **)ss_in_eps;
-+ }
-+ else if (dev_speed == USB_SPEED_SUPER) {
-+ ep_array = (struct sch_ep **)ss_out_eps;
-+ }
-+ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) {
-+ ep_array = (struct sch_ep **)hs_eps;
-+ }
-+ else {
-+ ep_array = (struct sch_ep **)tt_intr_eps;
-+ }
-+ for (i = 0; i < MAX_EP_NUM; i++) {
-+ cur_ep = (struct sch_ep *)ep_array[i];
-+ if(cur_ep != NULL && cur_ep->ep == ep){
-+ ep_array[i] = NULL;
-+ return cur_ep;
-+ }
-+ }
-+ return NULL;
-+}
-+
-+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){
-+ mtk_u32 bPkts = 0;
-+ mtk_u32 bCsCount = 0;
-+ mtk_u32 bBm = 1;
-+ mtk_u32 bOffset = 0;
-+ mtk_u32 bRepeat = 0;
-+ int ret;
-+ struct mtk_xhci_ep_ctx *temp_ep_ctx;
-+ int td_size;
-+ int mframe_idx, frame_idx;
-+ int bw_cost;
-+ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat;
-+ int cur_offset, cs_mframe;
-+ int break_out;
-+ int frame_interval;
-+
-+ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp
-+ , interval, burst, mult, ep, ep_ctx, sch_ep);
-+ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){
-+ frame_interval = interval >> 3;
-+ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){
-+ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx);
-+ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){
-+ printk(KERN_ERR "check OK............\n");
-+ bOffset = frame_idx<<3;
-+ bPkts = 1;
-+ bCsCount = 3;
-+ bw_cost = maxp;
-+ bRepeat = 0;
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ break;
-+ }
-+ }
-+ }
-+ else if(isTT && ep_type == USB_EP_ISOC){
-+ best_bw = HS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp;
-+ break_out = 0;
-+ frame_interval = interval>>3;
-+ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){
-+ for(mframe_idx=0; mframe_idx<8; mframe_idx++){
-+ cur_offset = (frame_idx*8) + mframe_idx;
-+ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = cur_offset;
-+ best_bw = cur_bw;
-+ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break_out = 1;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bPkts = 1;
-+ bCsCount = (maxp + (188 - 1)) / 188;
-+ if(is_in){
-+ cs_mframe = bOffset%8 + 2 + bCsCount;
-+ if (cs_mframe <= 6)
-+ bCsCount += 2;
-+ else if (cs_mframe == 7)
-+ bCsCount++;
-+ }
-+ bw_cost = 188;
-+ bRepeat = 0;
-+ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
-+ best_bw = HS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp*(burst+1);
-+ for(cur_offset = 0; cur_offset<interval; cur_offset++){
-+ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = cur_offset;
-+ best_bw = cur_bw;
-+ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break;
-+ }
-+ }
-+ }
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bPkts = burst + 1;
-+ bCsCount = 0;
-+ bw_cost = td_size;
-+ bRepeat = 0;
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
-+ best_bw = SS_BW_BOUND;
-+ best_bw_idx = -1;
-+ cur_bw = 0;
-+ td_size = maxp * (mult+1) * (burst+1);
-+ if(mult == 0){
-+ max_repeat = 0;
-+ }
-+ else{
-+ max_repeat = (interval-1)/(mult+1);
-+ }
-+ break_out = 0;
-+ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){
-+ for(repeat = max_repeat; repeat >= 0; repeat--){
-+ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx
-+ , repeat, td_size);
-+ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n"
-+ , frame_idx, repeat, td_size, cur_bw);
-+ if(cur_bw > 0 && cur_bw < best_bw){
-+ best_bw_idx = frame_idx;
-+ best_bw_repeat = repeat;
-+ best_bw = cur_bw;
-+ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){
-+ break_out = 1;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat);
-+ if(best_bw_idx == -1){
-+ return SCH_FAIL;
-+ }
-+ else{
-+ bOffset = best_bw_idx;
-+ bCsCount = 0;
-+ bRepeat = best_bw_repeat;
-+ if(bRepeat == 0){
-+ bw_cost = (burst+1)*(mult+1)*maxp;
-+ bPkts = (burst+1)*(mult+1);
-+ }
-+ else{
-+ bw_cost = (burst+1)*maxp;
-+ bPkts = (burst+1);
-+ }
-+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
-+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
-+ return SCH_FAIL;
-+ }
-+ ret = SCH_SUCCESS;
-+ }
-+ }
-+ else{
-+ bPkts = 1;
-+ ret = SCH_SUCCESS;
-+ }
-+ if(ret == SCH_SUCCESS){
-+ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx;
-+ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm));
-+ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat));
-+
-+ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm);
-+ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat);
-+ return SCH_SUCCESS;
-+ }
-+ else{
-+ return SCH_FAIL;
-+ }
-+}
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk-scheduler.h
-@@ -0,0 +1,77 @@
-+#ifndef _XHCI_MTK_SCHEDULER_H
-+#define _XHCI_MTK_SCHEDULER_H
-+
-+#define MTK_SCH_NEW 1
-+
-+#define SCH_SUCCESS 1
-+#define SCH_FAIL 0
-+
-+#define MAX_EP_NUM 64
-+#define SS_BW_BOUND 51000
-+#define HS_BW_BOUND 6144
-+
-+#define USB_EP_CONTROL 0
-+#define USB_EP_ISOC 1
-+#define USB_EP_BULK 2
-+#define USB_EP_INT 3
-+
-+#define USB_SPEED_LOW 1
-+#define USB_SPEED_FULL 2
-+#define USB_SPEED_HIGH 3
-+#define USB_SPEED_SUPER 5
-+
-+/* mtk scheduler bitmasks */
-+#define BPKTS(p) ((p) & 0x3f)
-+#define BCSCOUNT(p) (((p) & 0x7) << 8)
-+#define BBM(p) ((p) << 11)
-+#define BOFFSET(p) ((p) & 0x3fff)
-+#define BREPEAT(p) (((p) & 0x7fff) << 16)
-+
-+
-+#if 1
-+typedef unsigned int mtk_u32;
-+typedef unsigned long long mtk_u64;
-+#endif
-+
-+#define NULL ((void *)0)
-+
-+struct mtk_xhci_ep_ctx {
-+ mtk_u32 ep_info;
-+ mtk_u32 ep_info2;
-+ mtk_u64 deq;
-+ mtk_u32 tx_info;
-+ /* offset 0x14 - 0x1f reserved for HC internal use */
-+ mtk_u32 reserved[3];
-+};
-+
-+
-+struct sch_ep
-+{
-+ //device info
-+ int dev_speed;
-+ int isTT;
-+ //ep info
-+ int is_in;
-+ int ep_type;
-+ int maxp;
-+ int interval;
-+ int burst;
-+ int mult;
-+ //scheduling info
-+ int offset;
-+ int repeat;
-+ int pkts;
-+ int cs_count;
-+ int burst_mode;
-+ //other
-+ int bw_cost; //bandwidth cost in each repeat; including overhead
-+ mtk_u32 *ep; //address of usb_endpoint pointer
-+};
-+
-+int mtk_xhci_scheduler_init(void);
-+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
-+ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep);
-+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep);
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk.c
-@@ -0,0 +1,265 @@
-+#include "xhci-mtk.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci.h"
-+#include "mtk-phy.h"
-+#ifdef CONFIG_C60802_SUPPORT
-+#include "mtk-phy-c60802.h"
-+#endif
-+#include "xhci-mtk-scheduler.h"
-+#include <linux/kernel.h> /* printk() */
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <asm/uaccess.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+
-+void setInitialReg(void )
-+{
-+ __u32 __iomem *addr;
-+ u32 temp;
-+
-+ /* set SSUSB DMA burst size to 128B */
-+ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG;
-+ temp = SSUSB_HDMA_CFG_MT7621_VALUE;
-+ writel(temp, addr);
-+
-+ /* extend U3 LTSSM Polling.LFPS timeout value */
-+ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3;
-+ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE;
-+ writel(temp, addr);
-+
-+ /* EOF */
-+ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF;
-+ temp = SYNC_HS_EOF_VALUE;
-+ writel(temp, addr);
-+
-+#if defined (CONFIG_PERIODIC_ENP)
-+ /* HSCH_CFG1: SCH2_FIFO_DEPTH */
-+ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET);
-+ writel(temp, addr);
-+#endif
-+
-+ /* Doorbell handling */
-+ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0;
-+ temp = 0x1;
-+ writel(temp, addr);
-+
-+ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */
-+ /* Port 0 */
-+ addr = U2_PHY_BASE + U2_PHYD_CR1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << 18);
-+ temp |= (1 << 18);
-+ writel(temp, addr);
-+
-+ /* Port 1 */
-+ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1;
-+ temp = readl(addr);
-+ temp &= ~(0x3 << 18);
-+ temp |= (1 << 18);
-+ writel(temp, addr);
-+}
-+
-+
-+void setLatchSel(void){
-+ __u32 __iomem *latch_sel_addr;
-+ u32 latch_sel_value;
-+ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD;
-+ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX);
-+ writel(latch_sel_value, latch_sel_addr);
-+}
-+
-+void reinitIP(void){
-+ __u32 __iomem *ip_reset_addr;
-+ u32 ip_reset_value;
-+
-+ enableAllClockPower();
-+ mtk_xhci_scheduler_init();
-+}
-+
-+void dbg_prb_out(void){
-+ mtk_probe_init(0x0f0f0f0f);
-+ mtk_probe_out(0xffffffff);
-+ mtk_probe_out(0x01010101);
-+ mtk_probe_out(0x02020202);
-+ mtk_probe_out(0x04040404);
-+ mtk_probe_out(0x08080808);
-+ mtk_probe_out(0x10101010);
-+ mtk_probe_out(0x20202020);
-+ mtk_probe_out(0x40404040);
-+ mtk_probe_out(0x80808080);
-+ mtk_probe_out(0x55555555);
-+ mtk_probe_out(0xaaaaaaaa);
-+}
-+
-+
-+
-+///////////////////////////////////////////////////////////////////////////////
-+
-+#define RET_SUCCESS 0
-+#define RET_FAIL 1
-+
-+static int dbg_u3w(int argc, char**argv)
-+{
-+ int u4TimingValue;
-+ char u1TimingValue;
-+ int u4TimingAddress;
-+
-+ if (argc<3)
-+ {
-+ printk(KERN_ERR "Arg: address value\n");
-+ return RET_FAIL;
-+ }
-+ u3phy_init();
-+
-+ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
-+ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16);
-+ u1TimingValue = u4TimingValue & 0xff;
-+ /* access MMIO directly */
-+ writel(u1TimingValue, u4TimingAddress);
-+ printk(KERN_ERR "Write done\n");
-+ return RET_SUCCESS;
-+
-+}
-+
-+static int dbg_u3r(int argc, char**argv)
-+{
-+ char u1ReadTimingValue;
-+ int u4TimingAddress;
-+ if (argc<2)
-+ {
-+ printk(KERN_ERR "Arg: address\n");
-+ return 0;
-+ }
-+ u3phy_init();
-+ mdelay(500);
-+ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
-+ /* access MMIO directly */
-+ u1ReadTimingValue = readl(u4TimingAddress);
-+ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue);
-+ return 0;
-+}
-+
-+static int dbg_u3init(int argc, char**argv)
-+{
-+ int ret;
-+ ret = u3phy_init();
-+ printk(KERN_ERR "phy registers and operations initial done\n");
-+ if(u3phy_ops->u2_slew_rate_calibration){
-+ u3phy_ops->u2_slew_rate_calibration(u3phy);
-+ }
-+ else{
-+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
-+ }
-+ if(u3phy_ops->init(u3phy) == PHY_TRUE)
-+ return RET_SUCCESS;
-+ return RET_FAIL;
-+}
-+
-+void dbg_setU1U2(int argc, char**argv){
-+ struct xhci_hcd *xhci;
-+ int u1_value;
-+ int u2_value;
-+ u32 port_id, temp;
-+ u32 __iomem *addr;
-+
-+ if (argc<3)
-+ {
-+ printk(KERN_ERR "Arg: u1value u2value\n");
-+ return RET_FAIL;
-+ }
-+
-+ u1_value = (int)simple_strtol(argv[1], &argv[1], 10);
-+ u2_value = (int)simple_strtol(argv[2], &argv[2], 10);
-+ addr = (SSUSB_U3_XHCI_BASE + 0x424);
-+ temp = readl(addr);
-+ temp = temp & (~(0x0000ffff));
-+ temp = temp | u1_value | (u2_value<<8);
-+ writel(temp, addr);
-+}
-+///////////////////////////////////////////////////////////////////////////////
-+
-+int call_function(char *buf)
-+{
-+ int i;
-+ int argc;
-+ char *argv[80];
-+
-+ argc = 0;
-+ do
-+ {
-+ argv[argc] = strsep(&buf, " ");
-+ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]);
-+ argc++;
-+ } while (buf);
-+ if (!strcmp("dbg.r", argv[0]))
-+ dbg_prb_out();
-+ else if (!strcmp("dbg.u3w", argv[0]))
-+ dbg_u3w(argc, argv);
-+ else if (!strcmp("dbg.u3r", argv[0]))
-+ dbg_u3r(argc, argv);
-+ else if (!strcmp("dbg.u3i", argv[0]))
-+ dbg_u3init(argc, argv);
-+ else if (!strcmp("pw.u1u2", argv[0]))
-+ dbg_setU1U2(argc, argv);
-+ return 0;
-+}
-+
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ char w_buf[200];
-+ char r_buf[200] = "this is a test";
-+ int len = 200;
-+
-+ switch (cmd) {
-+ case IOCTL_READ:
-+ copy_to_user((char *) arg, r_buf, len);
-+ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf);
-+ break;
-+ case IOCTL_WRITE:
-+ copy_from_user(w_buf, (char *) arg, len);
-+ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf);
-+
-+ //invoke function
-+ return call_function(w_buf);
-+ break;
-+ default:
-+ return -ENOTTY;
-+ }
-+
-+ return len;
-+}
-+
-+int xhci_mtk_test_open(struct inode *inode, struct file *file)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test open: successful\n");
-+ return 0;
-+}
-+
-+int xhci_mtk_test_release(struct inode *inode, struct file *file)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test release: successful\n");
-+ return 0;
-+}
-+
-+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n");
-+ return 0;
-+}
-+
-+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
-+{
-+
-+ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n");
-+ return 0;
-+}
-+
-+
-+
-+
---- /dev/null
-+++ b/drivers/usb/host/xhci-mtk.h
-@@ -0,0 +1,120 @@
-+#ifndef _XHCI_MTK_H
-+#define _XHCI_MTK_H
-+
-+#include <linux/usb.h>
-+#include "xhci.h"
-+
-+#define SSUSB_U3_XHCI_BASE 0xBE1C0000
-+#define SSUSB_U3_MAC_BASE 0xBE1C2400
-+#define SSUSB_U3_SYS_BASE 0xBE1C2600
-+#define SSUSB_U2_SYS_BASE 0xBE1C3400
-+#define SSUB_SIF_SLV_TOP 0xBE1D0000
-+#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700)
-+
-+#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130
-+#define U3_PIPE_LATCH_TX 0
-+#define U3_PIPE_LATCH_RX 0
-+
-+#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0
-+#define U3_REF_CK_PAR 0xb0
-+#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8
-+#define U3_RX_UX_EXIT_LFPS_REF 3
-+#define U3_REF_CK_VAL 10
-+
-+#define U3_TIMING_PULSE_CTRL 0xb4
-+#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125
-+
-+#define USB20_TIMING_PARAMETER 0x40
-+#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125
-+
-+#define LINK_PM_TIMER 0x8
-+#define PM_LC_TIMEOUT_VALUE 3
-+
-+#define XHCI_IMOD 0x624
-+#define XHCI_IMOD_MT7621_VALUE 0x10
-+
-+#define SSUSB_HDMA_CFG 0x950
-+#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C
-+
-+#define U3_LTSSM_TIMING_PARAMETER3 0x2514
-+#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C
-+
-+#define U2_PHYD_CR1 0x64
-+
-+#define SSUSB_IP_SPAR0 0xC8
-+
-+#define SYNC_HS_EOF 0x938
-+#define SYNC_HS_EOF_VALUE 0x201F3
-+
-+#define HSCH_CFG1 0x960
-+#define SCH2_FIFO_DEPTH_OFFSET 16
-+
-+
-+#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0)
-+#define SSUSB_IP_SW_RST (1<<0)
-+#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4)
-+#define SSUSB_IP_PDN (1<<0)
-+#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08))
-+#define SSUSB_U3_PORT_DIS (1<<0)
-+#define SSUSB_U3_PORT_PDN (1<<1)
-+#define SSUSB_U3_PORT_HOST_SEL (1<<2)
-+#define SSUSB_U3_PORT_CKBG_EN (1<<3)
-+#define SSUSB_U3_PORT_MAC_RST (1<<4)
-+#define SSUSB_U3_PORT_PHYD_RST (1<<5)
-+#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08))
-+#define SSUSB_U2_PORT_DIS (1<<0)
-+#define SSUSB_U2_PORT_PDN (1<<1)
-+#define SSUSB_U2_PORT_HOST_SEL (1<<2)
-+#define SSUSB_U2_PORT_CKBG_EN (1<<3)
-+#define SSUSB_U2_PORT_MAC_RST (1<<4)
-+#define SSUSB_U2_PORT_PHYD_RST (1<<5)
-+#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024)
-+
-+#define SSUSB_U3_PORT_NUM(p) (p & 0xff)
-+#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff)
-+
-+
-+#define XHCI_MTK_TEST_MAJOR 234
-+#define DEVICE_NAME "xhci_mtk_test"
-+
-+#define CLI_MAGIC 'CLI'
-+#define IOCTL_READ _IOR(CLI_MAGIC, 0, int)
-+#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int)
-+
-+void reinitIP(void);
-+void setInitialReg(void);
-+void dbg_prb_out(void);
-+int call_function(char *buf);
-+
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-+int xhci_mtk_test_open(struct inode *inode, struct file *file);
-+int xhci_mtk_test_release(struct inode *inode, struct file *file);
-+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
-+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
-+
-+/*
-+ mediatek probe out
-+*/
-+/************************************************************************************/
-+
-+#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0)
-+#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc)
-+
-+static inline void mtk_probe_init(const u32 byte){
-+ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
-+ writel(byte, ptr);
-+}
-+
-+static inline void mtk_probe_out(const u32 value){
-+ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
-+ writel(value, ptr);
-+}
-+
-+static inline u32 mtk_probe_value(void){
-+ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
-+
-+ return readl(ptr);
-+}
-+
-+
-+#endif
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -43,6 +43,13 @@ static void xhci_plat_quirks(struct devi
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ /* MTK host controller gives a spurious successful event after a
-+ * short transfer. Ignore it.
-+ */
-+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
-+ xhci->quirks |= XHCI_LPM_SUPPORT;
-+#endif
- }
-
- /* called during probe() after chip reset completes */
-@@ -89,7 +96,11 @@ static int xhci_plat_probe(struct platfo
-
- driver = &xhci_plat_hc_driver;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ irq = XHC_IRQ;
-+#else
- irq = platform_get_irq(pdev, 0);
-+#endif
- if (irq < 0)
- return -ENODEV;
-
---- a/drivers/usb/host/xhci-ring.c
-+++ b/drivers/usb/host/xhci-ring.c
-@@ -254,16 +254,20 @@ static void inc_enq(struct xhci_hcd *xhc
- static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
- unsigned int num_trbs)
- {
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- int num_trbs_in_deq_seg;
-+#endif
-
- if (ring->num_trbs_free < num_trbs)
- return 0;
-
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
- num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
- if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
- return 0;
- }
-+#endif
-
- return 1;
- }
-@@ -2869,6 +2873,7 @@ static int prepare_ring(struct xhci_hcd
- next = ring->enqueue;
-
- while (last_trb(xhci, ring, ring->enq_seg, next)) {
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- /* If we're not dealing with 0.95 hardware or isoc rings
- * on AMD 0.96 host, clear the chain bit.
- */
-@@ -2878,6 +2883,9 @@ static int prepare_ring(struct xhci_hcd
- next->link.control &= cpu_to_le32(~TRB_CHAIN);
- else
- next->link.control |= cpu_to_le32(TRB_CHAIN);
-+#else
-+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
-+#endif
-
- wmb();
- next->link.control ^= cpu_to_le32(TRB_CYCLE);
-@@ -3008,6 +3016,9 @@ static void giveback_first_trb(struct xh
- start_trb->field[3] |= cpu_to_le32(start_cycle);
- else
- start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ wmb();
-+#endif
- xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
- }
-
-@@ -3063,6 +3074,29 @@ static u32 xhci_td_remainder(unsigned in
- return (remainder >> 10) << 17;
- }
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
-+{
-+ u32 max = 31;
-+ int remainder, td_packet_count, packet_transferred;
-+
-+ //0 for the last TRB
-+ //FIXME: need to workaround if there is ZLP in this TD
-+ if (td_running_total + trb_buffer_length == td_transfer_size)
-+ return 0;
-+
-+ //FIXME: need to take care of high-bandwidth (MAX_ESIT)
-+ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
-+ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
-+ remainder = td_packet_count - packet_transferred;
-+
-+ if (remainder > max)
-+ return max << 17;
-+ else
-+ return remainder << 17;
-+}
-+#endif
-+
- /*
- * For xHCI 1.0 host controllers, TD size is the number of max packet sized
- * packets remaining in the TD (*not* including this TRB).
-@@ -3220,6 +3254,7 @@ static int queue_bulk_sg_tx(struct xhci_
- }
-
- /* Set the TRB length, TD size, and interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- urb->transfer_buffer_length -
-@@ -3229,6 +3264,12 @@ static int queue_bulk_sg_tx(struct xhci_
- trb_buff_len, total_packet_count, urb,
- num_trbs - 1);
- }
-+#else
-+ if (num_trbs > 1)
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length,
-+ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
-+#endif
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
-@@ -3293,6 +3334,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
- int running_total, trb_buff_len, ret;
- unsigned int total_packet_count;
- u64 addr;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ int max_packet;
-+#endif
-
- if (urb->num_sgs)
- return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
-@@ -3317,6 +3361,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
- num_trbs++;
- running_total += TRB_MAX_BUFF_SIZE;
- }
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ switch(urb->dev->speed){
-+ case USB_SPEED_SUPER:
-+ max_packet = urb->ep->desc.wMaxPacketSize;
-+ break;
-+ case USB_SPEED_HIGH:
-+ case USB_SPEED_FULL:
-+ case USB_SPEED_LOW:
-+ case USB_SPEED_WIRELESS:
-+ case USB_SPEED_UNKNOWN:
-+ default:
-+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
-+ break;
-+ }
-+ if((urb->transfer_flags & URB_ZERO_PACKET)
-+ && ((urb->transfer_buffer_length % max_packet) == 0)){
-+ num_trbs++;
-+ }
-+#endif
-
- ret = prepare_transfer(xhci, xhci->devs[slot_id],
- ep_index, urb->stream_id,
-@@ -3393,6 +3456,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
- field |= TRB_ISP;
-
- /* Set the TRB length, TD size, and interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- urb->transfer_buffer_length -
-@@ -3402,6 +3466,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
- trb_buff_len, total_packet_count, urb,
- num_trbs - 1);
- }
-+#else
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
-+#endif
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
-@@ -3491,7 +3559,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
- field |= 0x1;
-
- /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (1) {
-+#else
- if (xhci->hci_version >= 0x100) {
-+#endif
- if (urb->transfer_buffer_length > 0) {
- if (setup->bRequestType & USB_DIR_IN)
- field |= TRB_TX_TYPE(TRB_DATA_IN);
-@@ -3515,7 +3587,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
- field = TRB_TYPE(TRB_DATA);
-
- length_field = TRB_LEN(urb->transfer_buffer_length) |
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- xhci_td_remainder(urb->transfer_buffer_length) |
-+#else
-+ //CC: MTK style, no scatter-gather for control transfer
-+ 0 |
-+#endif
- TRB_INTR_TARGET(0);
- if (urb->transfer_buffer_length > 0) {
- if (setup->bRequestType & USB_DIR_IN)
-@@ -3731,6 +3808,9 @@ static int xhci_queue_isoc_tx(struct xhc
- bool more_trbs_coming;
- struct xhci_virt_ep *xep;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ int max_packet;
-+#endif
- xep = &xhci->devs[slot_id]->eps[ep_index];
- ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
-
-@@ -3744,6 +3824,21 @@ static int xhci_queue_isoc_tx(struct xhc
- start_trb = &ep_ring->enqueue->generic;
- start_cycle = ep_ring->cycle_state;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ switch(urb->dev->speed){
-+ case USB_SPEED_SUPER:
-+ max_packet = urb->ep->desc.wMaxPacketSize;
-+ break;
-+ case USB_SPEED_HIGH:
-+ case USB_SPEED_FULL:
-+ case USB_SPEED_LOW:
-+ case USB_SPEED_WIRELESS:
-+ case USB_SPEED_UNKNOWN:
-+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
-+ break;
-+ }
-+#endif
-+
- urb_priv = urb->hcpriv;
- /* Queue the first TRB, even if it's zero-length */
- for (i = 0; i < num_tds; i++) {
-@@ -3828,9 +3923,13 @@ static int xhci_queue_isoc_tx(struct xhc
- } else {
- td->last_trb = ep_ring->enqueue;
- field |= TRB_IOC;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (!(xhci->quirks & XHCI_AVOID_BEI)) {
-+#else
- if (xhci->hci_version == 0x100 &&
- !(xhci->quirks &
- XHCI_AVOID_BEI)) {
-+#endif
- /* Set BEI bit except for the last td */
- if (i < num_tds - 1)
- field |= TRB_BEI;
-@@ -3845,6 +3944,7 @@ static int xhci_queue_isoc_tx(struct xhc
- trb_buff_len = td_remain_len;
-
- /* Set the TRB length, TD size, & interrupter fields. */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- if (xhci->hci_version < 0x100) {
- remainder = xhci_td_remainder(
- td_len - running_total);
-@@ -3854,6 +3954,10 @@ static int xhci_queue_isoc_tx(struct xhc
- total_packet_count, urb,
- (trbs_per_td - j - 1));
- }
-+#else
-+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
-+#endif
-+
- length_field = TRB_LEN(trb_buff_len) |
- remainder |
- TRB_INTR_TARGET(0);
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -32,6 +32,16 @@
- #include "xhci.h"
- #include "xhci-trace.h"
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#include <asm/uaccess.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/platform_device.h>
-+#include "mtk-phy.h"
-+#include "xhci-mtk-scheduler.h"
-+#include "xhci-mtk-power.h"
-+#include "xhci-mtk.h"
-+#endif
-+
- #define DRIVER_AUTHOR "Sarah Sharp"
- #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
-
-@@ -46,6 +56,18 @@ static unsigned int quirks;
- module_param(quirks, uint, S_IRUGO);
- MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-+static struct file_operations xhci_mtk_test_fops = {
-+ .owner = THIS_MODULE,
-+ .read = xhci_mtk_test_read,
-+ .write = xhci_mtk_test_write,
-+ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl,
-+ .open = xhci_mtk_test_open,
-+ .release = xhci_mtk_test_release,
-+};
-+#endif
-+
- /* TODO: copied from ehci-hcd.c - can this be refactored? */
- /*
- * xhci_handshake - spin reading hc until handshake completes or fails
-@@ -208,7 +230,7 @@ int xhci_reset(struct xhci_hcd *xhci)
- return ret;
- }
-
--#ifdef CONFIG_PCI
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- static int xhci_free_msi(struct xhci_hcd *xhci)
- {
- int i;
-@@ -458,6 +480,11 @@ static void compliance_mode_recovery(uns
- "Attempting compliance mode recovery");
- hcd = xhci->shared_hcd;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ temp |= (1 << 31);
-+ writel(temp, xhci->usb3_ports[i]);
-+#endif
-+
- if (hcd->state == HC_STATE_SUSPENDED)
- usb_hcd_resume_root_hub(hcd);
-
-@@ -505,6 +532,9 @@ static bool xhci_compliance_mode_recover
- {
- const char *dmi_product_name, *dmi_sys_vendor;
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ return true;
-+#endif
- dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
- dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
- if (!dmi_product_name || !dmi_sys_vendor)
-@@ -550,6 +580,10 @@ int xhci_init(struct usb_hcd *hcd)
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "xHCI doesn't need link TRB QUIRK");
- }
-+
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ mtk_xhci_scheduler_init();
-+#endif
- retval = xhci_mem_init(xhci, GFP_KERNEL);
- xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
-
-@@ -634,7 +668,11 @@ int xhci_run(struct usb_hcd *hcd)
- "// Set the interrupt modulation register");
- temp = readl(&xhci->ir_set->irq_control);
- temp &= ~ER_IRQ_INTERVAL_MASK;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ temp |= (u32) 16;
-+#else
- temp |= (u32) 160;
-+#endif
- writel(temp, &xhci->ir_set->irq_control);
-
- /* Set the HCD state before we enable the irqs */
-@@ -659,6 +697,9 @@ int xhci_run(struct usb_hcd *hcd)
- xhci_queue_vendor_command(xhci, command, 0, 0, 0,
- TRB_TYPE(TRB_NEC_GET_FW));
- }
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ enableXhciAllPortPower(xhci);
-+#endif
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "Finished xhci_run for USB2 roothub");
- return 0;
-@@ -1649,6 +1690,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
- u32 drop_flag;
- u32 new_add_flags, new_drop_flags;
- int ret;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#if MTK_SCH_NEW
-+ struct xhci_slot_ctx *slot_ctx;
-+ struct sch_ep *sch_ep = NULL;
-+ int isTT;
-+ int ep_type;
-+#endif
-+#endif
-
- ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
- if (ret <= 0)
-@@ -1698,6 +1747,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
-
- xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#if MTK_SCH_NEW
-+ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
-+ if ((slot_ctx->tt_info & 0xff) > 0) {
-+ isTT = 1;
-+ }
-+ else {
-+ isTT = 0;
-+ }
-+ if (usb_endpoint_xfer_int(&ep->desc)) {
-+ ep_type = USB_EP_INT;
-+ }
-+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
-+ ep_type = USB_EP_ISOC;
-+ }
-+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
-+ ep_type = USB_EP_BULK;
-+ }
-+ else
-+ ep_type = USB_EP_CONTROL;
-+
-+ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
-+ , isTT, ep_type, (mtk_u32 *)ep);
-+ if (sch_ep != NULL) {
-+ kfree(sch_ep);
-+ }
-+ else {
-+ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
-+ }
-+#else
-+ mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
-+#endif
-+#endif
-+
- xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
- (unsigned int) ep->desc.bEndpointAddress,
- udev->slot_id,
-@@ -1730,6 +1813,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
- u32 new_add_flags, new_drop_flags;
- struct xhci_virt_device *virt_dev;
- int ret = 0;
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ struct xhci_ep_ctx *in_ep_ctx;
-+#if MTK_SCH_NEW
-+ struct xhci_slot_ctx *slot_ctx;
-+ struct sch_ep *sch_ep;
-+ int isTT;
-+ int ep_type;
-+ int maxp = 0;
-+ int burst = 0;
-+ int mult = 0;
-+ int interval;
-+#endif
-+#endif
-
- ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
- if (ret <= 0) {
-@@ -1793,6 +1889,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
- return -ENOMEM;
- }
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
-+#if MTK_SCH_NEW
-+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
-+ if ((slot_ctx->tt_info & 0xff) > 0) {
-+ isTT = 1;
-+ }
-+ else {
-+ isTT = 0;
-+ }
-+ if (usb_endpoint_xfer_int(&ep->desc)) {
-+ ep_type = USB_EP_INT;
-+ }
-+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
-+ ep_type = USB_EP_ISOC;
-+ }
-+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
-+ ep_type = USB_EP_BULK;
-+ }
-+ else
-+ ep_type = USB_EP_CONTROL;
-+
-+ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH
-+ || udev->speed == USB_SPEED_LOW) {
-+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
-+ burst = ep->desc.wMaxPacketSize >> 11;
-+ mult = 0;
-+ }
-+ else if (udev->speed == USB_SPEED_SUPER) {
-+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
-+ burst = ep->ss_ep_comp.bMaxBurst;
-+ mult = ep->ss_ep_comp.bmAttributes & 0x3;
-+ }
-+ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
-+ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
-+ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
-+ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
-+ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
-+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
-+
-+ return -ENOSPC;
-+ }
-+#else
-+ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
-+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
-+
-+ return -ENOSPC;
-+ }
-+#endif
-+#endif
- ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
- new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
-
-@@ -4456,8 +4602,14 @@ static u16 xhci_call_host_update_timeout
- u16 *timeout)
- {
- if (state == USB3_LPM_U1)
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (xhci->quirks & XHCI_INTEL_HOST)
-+#endif
- return xhci_calculate_u1_timeout(xhci, udev, desc);
- else if (state == USB3_LPM_U2)
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ if (xhci->quirks & XHCI_INTEL_HOST)
-+#endif
- return xhci_calculate_u2_timeout(xhci, udev, desc);
-
- return USB3_LPM_DISABLED;
-@@ -4849,7 +5001,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
- hcd->self.no_sg_constraint = 1;
-
- /* XHCI controllers don't stop the ep queue on short packets :| */
-+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
- hcd->self.no_stop_on_short = 1;
-+#endif
-
- if (usb_hcd_is_primary_hcd(hcd)) {
- xhci = hcd_to_xhci(hcd);
-@@ -4910,6 +5064,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
- return retval;
- xhci_dbg(xhci, "Reset complete\n");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ setInitialReg();
-+#endif
-+
- /* Set dma_mask and coherent_dma_mask to 64-bits,
- * if xHC supports 64-bit addressing */
- if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -5015,8 +5173,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
- MODULE_AUTHOR(DRIVER_AUTHOR);
- MODULE_LICENSE("GPL");
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+static struct resource xhci_resouce[] = {
-+ {
-+ .name = "xhci-hcd",
-+ .start = XHC_IO_START,
-+ .end = XHC_IO_START + XHC_IO_LENGTH -1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device xhci_platform_dev = {
-+ .name = "xhci-hcd",
-+ .id = -1,
-+ .dev = {
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = xhci_resouce,
-+};
-+#endif
-+
- static int __init xhci_hcd_init(void)
- {
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+ struct platform_device *pPlatformDev;
-+
-+ register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
-+
-+ u3phy_init();
-+ if (u3phy_ops->u2_slew_rate_calibration) {
-+ u3phy_ops->u2_slew_rate_calibration(u3phy);
-+ u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
-+ }
-+ else{
-+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
-+ }
-+ u3phy_ops->init(u3phy);
-+ reinitIP();
-+
-+ pPlatformDev = &xhci_platform_dev;
-+ memset(pPlatformDev, 0, sizeof(struct platform_device));
-+ pPlatformDev->name = "xhci-hcd";
-+ pPlatformDev->id = -1;
-+ pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
-+ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
-+ pPlatformDev->resource = xhci_resouce;
-+ pPlatformDev->num_resources = ARRAY_SIZE(xhci_resouce);
-+
-+// platform_device_register(&xhci_platform_dev);
-+
-+#endif
-+
- /*
- * Check the compiler generated sizes of structures that must be laid
- * out in specific ways for hardware access.
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -33,6 +33,21 @@
- #include "xhci-ext-caps.h"
- #include "pci-quirks.h"
-
-+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#define XHC_IRQ (22 + 7)
-+#define XHC_IO_START 0x1E1C0000
-+#define XHC_IO_LENGTH 0x10000
-+/* mtk scheduler bitmasks */
-+#define BPKTS(p) ((p) & 0x3f)
-+#define BCSCOUNT(p) (((p) & 0x7) << 8)
-+#define BBM(p) ((p) << 11)
-+#define BOFFSET(p) ((p) & 0x3fff)
-+#define BREPEAT(p) (((p) & 0x7fff) << 16)
-+#endif
-+
-+
-+
-+
- /* xHCI PCI Configuration Registers */
- #define XHCI_SBRN_OFFSET (0x60)
-
-@@ -1597,8 +1612,12 @@ struct xhci_hcd {
- /* Compliance Mode Recovery Data */
- struct timer_list comp_mode_recovery_timer;
- u32 port_status_u0;
-+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
-+#define COMP_MODE_RCVRY_MSECS 5000
-+#else
- /* Compliance Mode Timer Triggered every 2 seconds */
- #define COMP_MODE_RCVRY_MSECS 2000
-+#endif
- };
-
- /* Platform specific overrides to generic XHCI hc_driver ops */
-@@ -1763,6 +1782,26 @@ void xhci_urb_free_priv(struct urb_priv
- void xhci_free_command(struct xhci_hcd *xhci,
- struct xhci_command *command);
-
-+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+/* xHCI PCI glue */
-+int xhci_register_pci(void);
-+void xhci_unregister_pci(void);
-+#else
-+static inline int xhci_register_pci(void) { return 0; }
-+static inline void xhci_unregister_pci(void) {}
-+#endif
-+
-+#if defined(CONFIG_USB_XHCI_PLATFORM) \
-+ || defined(CONFIG_USB_XHCI_PLATFORM_MODULE)
-+int xhci_register_plat(void);
-+void xhci_unregister_plat(void);
-+#else
-+static inline int xhci_register_plat(void)
-+{ return 0; }
-+static inline void xhci_unregister_plat(void)
-+{ }
-+#endif
-+
- /* xHCI host controller glue */
- typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
- int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
diff --git a/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch b/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch
deleted file mode 100644
index 2b1722e177..0000000000
--- a/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 34/53] NET: multi phy support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/phy/phy.c | 9 ++++++---
- include/linux/phy.h | 1 +
- 2 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -887,7 +887,8 @@ void phy_state_machine(struct work_struc
- /* If the link is down, give up on negotiation for now */
- if (!phydev->link) {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- break;
- }
-@@ -967,7 +968,8 @@ void phy_state_machine(struct work_struc
- netif_carrier_on(phydev->attached_dev);
- } else {
- phydev->state = PHY_NOLINK;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- }
-
- phydev->adjust_link(phydev->attached_dev);
-@@ -979,7 +981,8 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
- if (phydev->link) {
- phydev->link = 0;
-- netif_carrier_off(phydev->attached_dev);
-+ if (!phydev->no_auto_carrier_off)
-+ netif_carrier_off(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
- do_suspend = true;
- }
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -375,6 +375,7 @@ struct phy_device {
- bool is_pseudo_fixed_link;
- bool has_fixups;
- bool suspended;
-+ bool no_auto_carrier_off;
-
- enum phy_state state;
-
diff --git a/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
deleted file mode 100644
index 44a3ed6af7..0000000000
--- a/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 86ab021705a493a5276261953f4f2cb071df6722 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 22 Apr 2013 23:20:03 +0200
-Subject: [PATCH 35/53] NET: MIPS: add ralink SoC ethernet driver
-
-Add support for Ralink FE and ESW.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/rt305x.c | 1 +
- drivers/net/ethernet/Kconfig | 1 +
- drivers/net/ethernet/Makefile | 1 +
- 3 files changed, 3 insertions(+)
-
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -199,6 +199,7 @@ void __init ralink_clk_init(void)
- }
-
- ralink_clk_add("cpu", cpu_rate);
-+ ralink_clk_add("sys", sys_rate);
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000b40.spi", sys_rate);
- ralink_clk_add("10000100.timer", wdt_rate);
diff --git a/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
deleted file mode 100644
index b6189fe096..0000000000
--- a/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 8e72a3a1be8f6328bd7ef491332ba541547b6086 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:38:51 +0200
-Subject: [PATCH 36/53] mtd: fix cfi cmdset 0002 erase status check
-
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -2291,7 +2291,7 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-+ if (chip_good(map, adr, map_word_ff(map)))
- break;
-
- if (time_after(jiffies, timeo)) {
-@@ -2380,7 +2380,7 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
- break;
- }
diff --git a/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch
deleted file mode 100644
index 8f274bca15..0000000000
--- a/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:39:21 +0200
-Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write
-
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,7 +40,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_WORD_RETRIES 3
-
-@@ -51,7 +51,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
- mtd->_write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1789,6 +1793,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1917,7 +1922,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1992,6 +1996,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch b/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch
deleted file mode 100644
index 0bf9043168..0000000000
--- a/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch
+++ /dev/null
@@ -1,2408 +0,0 @@
-From fb6e1578cd73d7d81f675e75247a676423f32412 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 17 Nov 2013 17:41:46 +0100
-Subject: [PATCH 38/53] mtd: ralink: add mt7620 nand driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/maps/Kconfig | 4 +
- drivers/mtd/maps/Makefile | 2 +
- drivers/mtd/maps/ralink_nand.c | 2136 ++++++++++++++++++++++++++++++++++++++++
- drivers/mtd/maps/ralink_nand.h | 232 +++++
- 4 files changed, 2374 insertions(+)
- create mode 100644 drivers/mtd/maps/ralink_nand.c
- create mode 100644 drivers/mtd/maps/ralink_nand.h
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR
-
- If compiled as a module, it will be called latch-addr-flash.
-
-+config MTD_NAND_MT7620
-+ tristate "Support for NAND on Mediatek MT7620"
-+ depends on RALINK && SOC_MT7620
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -43,3 +43,5 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
- obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
-+obj-$(CONFIG_MTD_NAND_MT7620) += ralink_nand.o
-+
---- /dev/null
-+++ b/drivers/mtd/maps/ralink_nand.c
-@@ -0,0 +1,2136 @@
-+#define DEBUG
-+#include <linux/device.h>
-+#undef DEBUG
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/mtd/partitions.h>
-+#include <asm/io.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+
-+#include "ralink_nand.h"
-+#ifdef RANDOM_GEN_BAD_BLOCK
-+#include <linux/random.h>
-+#endif
-+
-+#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1)
-+
-+
-+#define BLOCK_ALIGNED(a) ((a) & (CFG_BLOCKSIZE - 1))
-+
-+#define READ_STATUS_RETRY 1000
-+
-+struct mtd_info *ranfc_mtd = NULL;
-+
-+int skipbbt = 0;
-+int ranfc_debug = 1;
-+static int ranfc_bbt = 1;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+static int ranfc_verify = 1;
-+#endif
-+static u32 nand_addrlen;
-+
-+#if 0
-+module_param(ranfc_debug, int, 0644);
-+module_param(ranfc_bbt, int, 0644);
-+module_param(ranfc_verify, int, 0644);
-+#endif
-+
-+#if 0
-+#define ra_dbg(args...) do { if (ranfc_debug) printk(args); } while(0)
-+#else
-+#define ra_dbg(args...)
-+#endif
-+
-+#define CLEAR_INT_STATUS() ra_outl(NFC_INT_ST, ra_inl(NFC_INT_ST))
-+#define NFC_TRANS_DONE() (ra_inl(NFC_INT_ST) & INT_ST_ND_DONE)
-+
-+int is_nand_page_2048 = 0;
-+const unsigned int nand_size_map[2][3] = {{25, 30, 30}, {20, 27, 30}};
-+
-+static int nfc_wait_ready(int snooze_ms);
-+
-+static const char * const mtk_probe_types[] = { "cmdlinepart", "ofpart", NULL };
-+
-+/**
-+ * reset nand chip
-+ */
-+static int nfc_chip_reset(void)
-+{
-+ int status;
-+
-+ //ra_dbg("%s:\n", __func__);
-+
-+ // reset nand flash
-+ ra_outl(NFC_CMD1, 0x0);
-+ ra_outl(NFC_CMD2, 0xff);
-+ ra_outl(NFC_ADDR, 0x0);
-+ ra_outl(NFC_CONF, 0x0411);
-+
-+ status = nfc_wait_ready(5); //erase wait 5us
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ }
-+
-+ return (int)(status & NAND_STATUS_FAIL);
-+
-+}
-+
-+
-+
-+/**
-+ * clear NFC and flash chip.
-+ */
-+static int nfc_all_reset(void)
-+{
-+ int retry;
-+
-+ ra_dbg("%s: \n", __func__);
-+
-+ // reset controller
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+ CLEAR_INT_STATUS();
-+
-+ retry = READ_STATUS_RETRY;
-+ while ((ra_inl(NFC_INT_ST) & 0x02) != 0x02 && retry--);
-+ if (retry <= 0) {
-+ printk("nfc_all_reset: clean buffer fail \n");
-+ return -1;
-+ }
-+
-+ retry = READ_STATUS_RETRY;
-+ while ((ra_inl(NFC_STATUS) & 0x1) != 0x0 && retry--) { //fixme, controller is busy ?
-+ udelay(1);
-+ }
-+
-+ nfc_chip_reset();
-+
-+ return 0;
-+}
-+
-+/** NOTICE: only called by nfc_wait_ready().
-+ * @return -1, nfc can not get transction done
-+ * @return 0, ok.
-+ */
-+static int _nfc_read_status(char *status)
-+{
-+ unsigned long cmd1, conf;
-+ int int_st, nfc_st;
-+ int retry;
-+
-+ cmd1 = 0x70;
-+ conf = 0x000101 | (1 << 20);
-+
-+ //fixme, should we check nfc status?
-+ CLEAR_INT_STATUS();
-+
-+ ra_outl(NFC_CMD1, cmd1);
-+ ra_outl(NFC_CONF, conf);
-+
-+ /* FIXME,
-+ * 1. since we have no wired ready signal, directly
-+ * calling this function is not gurantee to read right status under ready state.
-+ * 2. the other side, we can not determine how long to become ready, this timeout retry is nonsense.
-+ * 3. SUGGESTION: call nfc_read_status() from nfc_wait_ready(),
-+ * that is aware about caller (in sementics) and has snooze plused nfc ND_DONE.
-+ */
-+ retry = READ_STATUS_RETRY;
-+ do {
-+ nfc_st = ra_inl(NFC_STATUS);
-+ int_st = ra_inl(NFC_INT_ST);
-+
-+ ndelay(10);
-+ } while (!(int_st & INT_ST_RX_BUF_RDY) && retry--);
-+
-+ if (!(int_st & INT_ST_RX_BUF_RDY)) {
-+ printk("nfc_read_status: NFC fail, int_st(%x), retry:%x. nfc:%x, reset nfc and flash. \n",
-+ int_st, retry, nfc_st);
-+ nfc_all_reset();
-+ *status = NAND_STATUS_FAIL;
-+ return -1;
-+ }
-+
-+ *status = (char)(le32_to_cpu(ra_inl(NFC_DATA)) & 0x0ff);
-+ return 0;
-+}
-+
-+/**
-+ * @return !0, chip protect.
-+ * @return 0, chip not protected.
-+ */
-+static int nfc_check_wp(void)
-+{
-+ /* Check the WP bit */
-+#if !defined CONFIG_NOT_SUPPORT_WP
-+ return !!(ra_inl(NFC_CTRL) & 0x01);
-+#else
-+ char result = 0;
-+ int ret;
-+
-+ ret = _nfc_read_status(&result);
-+ //FIXME, if ret < 0
-+
-+ return !(result & NAND_STATUS_WP);
-+#endif
-+}
-+
-+#if !defined CONFIG_NOT_SUPPORT_RB
-+/*
-+ * @return !0, chip ready.
-+ * @return 0, chip busy.
-+ */
-+static int nfc_device_ready(void)
-+{
-+ /* Check the ready */
-+ return !!(ra_inl(NFC_STATUS) & 0x04);
-+}
-+#endif
-+
-+
-+/**
-+ * generic function to get data from flash.
-+ * @return data length reading from flash.
-+ */
-+static int _ra_nand_pull_data(char *buf, int len, int use_gdma)
-+{
-+#ifdef RW_DATA_BY_BYTE
-+ char *p = buf;
-+#else
-+ __u32 *p = (__u32 *)buf;
-+#endif
-+ int retry, int_st;
-+ unsigned int ret_data;
-+ int ret_size;
-+
-+ // receive data by use_gdma
-+ if (use_gdma) {
-+ //if (_ra_nand_dma_pull((unsigned long)p, len)) {
-+ if (1) {
-+ printk("%s: fail \n", __func__);
-+ len = -1; //return error
-+ }
-+
-+ return len;
-+ }
-+
-+ //fixme: retry count size?
-+ retry = READ_STATUS_RETRY;
-+ // no gdma
-+ while (len > 0) {
-+ int_st = ra_inl(NFC_INT_ST);
-+ if (int_st & INT_ST_RX_BUF_RDY) {
-+
-+ ret_data = ra_inl(NFC_DATA);
-+ ra_outl(NFC_INT_ST, INT_ST_RX_BUF_RDY);
-+#ifdef RW_DATA_BY_BYTE
-+ ret_size = sizeof(unsigned int);
-+ ret_size = min(ret_size, len);
-+ len -= ret_size;
-+ while (ret_size-- > 0) {
-+ //nfc is little endian
-+ *p++ = ret_data & 0x0ff;
-+ ret_data >>= 8;
-+ }
-+#else
-+ ret_size = min(len, 4);
-+ len -= ret_size;
-+ if (ret_size == 4)
-+ *p++ = ret_data;
-+ else {
-+ __u8 *q = (__u8 *)p;
-+ while (ret_size-- > 0) {
-+ *q++ = ret_data & 0x0ff;
-+ ret_data >>= 8;
-+ }
-+ p = (__u32 *)q;
-+ }
-+#endif
-+ retry = READ_STATUS_RETRY;
-+ }
-+ else if (int_st & INT_ST_ND_DONE) {
-+ break;
-+ }
-+ else {
-+ udelay(1);
-+ if (retry-- < 0)
-+ break;
-+ }
-+ }
-+
-+#ifdef RW_DATA_BY_BYTE
-+ return (int)(p - buf);
-+#else
-+ return ((int)p - (int)buf);
-+#endif
-+}
-+
-+/**
-+ * generic function to put data into flash.
-+ * @return data length writing into flash.
-+ */
-+static int _ra_nand_push_data(char *buf, int len, int use_gdma)
-+{
-+#ifdef RW_DATA_BY_BYTE
-+ char *p = buf;
-+#else
-+ __u32 *p = (__u32 *)buf;
-+#endif
-+ int retry, int_st;
-+ unsigned int tx_data = 0;
-+ int tx_size, iter = 0;
-+
-+ // receive data by use_gdma
-+ if (use_gdma) {
-+ //if (_ra_nand_dma_push((unsigned long)p, len))
-+ if (1)
-+ len = 0;
-+ printk("%s: fail \n", __func__);
-+ return len;
-+ }
-+
-+ // no gdma
-+ retry = READ_STATUS_RETRY;
-+ while (len > 0) {
-+ int_st = ra_inl(NFC_INT_ST);
-+ if (int_st & INT_ST_TX_BUF_RDY) {
-+#ifdef RW_DATA_BY_BYTE
-+ tx_size = min(len, (int)sizeof(unsigned long));
-+ for (iter = 0; iter < tx_size; iter++) {
-+ tx_data |= (*p++ << (8*iter));
-+ }
-+#else
-+ tx_size = min(len, 4);
-+ if (tx_size == 4)
-+ tx_data = (*p++);
-+ else {
-+ __u8 *q = (__u8 *)p;
-+ for (iter = 0; iter < tx_size; iter++)
-+ tx_data |= (*q++ << (8*iter));
-+ p = (__u32 *)q;
-+ }
-+#endif
-+ ra_outl(NFC_INT_ST, INT_ST_TX_BUF_RDY);
-+ ra_outl(NFC_DATA, tx_data);
-+ len -= tx_size;
-+ retry = READ_STATUS_RETRY;
-+ }
-+ else if (int_st & INT_ST_ND_DONE) {
-+ break;
-+ }
-+ else {
-+ udelay(1);
-+ if (retry-- < 0) {
-+ ra_dbg("%s p:%p buf:%p \n", __func__, p, buf);
-+ break;
-+ }
-+ }
-+ }
-+
-+
-+#ifdef RW_DATA_BY_BYTE
-+ return (int)(p - buf);
-+#else
-+ return ((int)p - (int)buf);
-+#endif
-+
-+}
-+
-+static int nfc_select_chip(struct ra_nand_chip *ra, int chipnr)
-+{
-+#if (CONFIG_NUMCHIPS == 1)
-+ if (!(chipnr < CONFIG_NUMCHIPS))
-+ return -1;
-+ return 0;
-+#else
-+ BUG();
-+#endif
-+}
-+
-+/** @return -1: chip_select fail
-+ * 0 : both CE and WP==0 are OK
-+ * 1 : CE OK and WP==1
-+ */
-+static int nfc_enable_chip(struct ra_nand_chip *ra, unsigned int offs, int read_only)
-+{
-+ int chipnr = offs >> ra->chip_shift;
-+
-+ ra_dbg("%s: offs:%x read_only:%x \n", __func__, offs, read_only);
-+
-+ chipnr = nfc_select_chip(ra, chipnr);
-+ if (chipnr < 0) {
-+ printk("%s: chip select error, offs(%x)\n", __func__, offs);
-+ return -1;
-+ }
-+
-+ if (!read_only)
-+ return nfc_check_wp();
-+
-+ return 0;
-+}
-+
-+/** wait nand chip becomeing ready and return queried status.
-+ * @param snooze: sleep time in ms unit before polling device ready.
-+ * @return status of nand chip
-+ * @return NAN_STATUS_FAIL if something unexpected.
-+ */
-+static int nfc_wait_ready(int snooze_ms)
-+{
-+ int retry;
-+ char status;
-+
-+ // wait nfc idle,
-+ if (snooze_ms == 0)
-+ snooze_ms = 1;
-+ else
-+ schedule_timeout(snooze_ms * HZ / 1000);
-+
-+ snooze_ms = retry = snooze_ms *1000000 / 100 ; // ndelay(100)
-+
-+ while (!NFC_TRANS_DONE() && retry--) {
-+ if (!cond_resched())
-+ ndelay(100);
-+ }
-+
-+ if (!NFC_TRANS_DONE()) {
-+ printk("nfc_wait_ready: no transaction done \n");
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+#if !defined (CONFIG_NOT_SUPPORT_RB)
-+ //fixme
-+ while(!(status = nfc_device_ready()) && retry--) {
-+ ndelay(100);
-+ }
-+
-+ if (status == 0) {
-+ printk("nfc_wait_ready: no device ready. \n");
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ _nfc_read_status(&status);
-+ return status;
-+#else
-+
-+ while(retry--) {
-+ _nfc_read_status(&status);
-+ if (status & NAND_STATUS_READY)
-+ break;
-+ ndelay(100);
-+ }
-+ if (retry<0)
-+ printk("nfc_wait_ready 2: no device ready, status(%x). \n", status);
-+
-+ return status;
-+#endif
-+}
-+
-+/**
-+ * return 0: erase OK
-+ * return -EIO: fail
-+ */
-+int nfc_erase_block(struct ra_nand_chip *ra, int row_addr)
-+{
-+ unsigned long cmd1, cmd2, bus_addr, conf;
-+ char status;
-+
-+ cmd1 = 0x60;
-+ cmd2 = 0xd0;
-+ bus_addr = row_addr;
-+ conf = 0x00511 | ((CFG_ROW_ADDR_CYCLE)<<16);
-+
-+ // set NFC
-+ ra_dbg("%s: cmd1: %lx, cmd2:%lx bus_addr: %lx, conf: %lx \n",
-+ __func__, cmd1, cmd2, bus_addr, conf);
-+
-+ //fixme, should we check nfc status?
-+ CLEAR_INT_STATUS();
-+
-+ ra_outl(NFC_CMD1, cmd1);
-+ ra_outl(NFC_CMD2, cmd2);
-+ ra_outl(NFC_ADDR, bus_addr);
-+ ra_outl(NFC_CONF, conf);
-+
-+ status = nfc_wait_ready(3); //erase wait 3ms
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+
-+}
-+
-+static inline int _nfc_read_raw_data(int cmd1, int cmd2, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags)
-+{
-+ int ret;
-+
-+ CLEAR_INT_STATUS();
-+ ra_outl(NFC_CMD1, cmd1);
-+ ra_outl(NFC_CMD2, cmd2);
-+ ra_outl(NFC_ADDR, bus_addr);
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+ ra_outl(NFC_ADDR2, bus_addr2);
-+#endif
-+ ra_outl(NFC_CONF, conf);
-+
-+ ret = _ra_nand_pull_data(buf, len, 0);
-+ if (ret != len) {
-+ ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len);
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ //FIXME, this section is not necessary
-+ ret = nfc_wait_ready(0); //wait ready
-+ /* to prevent the DATA FIFO 's old data from next operation */
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+ if (ret & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline int _nfc_write_raw_data(int cmd1, int cmd3, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags)
-+{
-+ int ret;
-+
-+ CLEAR_INT_STATUS();
-+ ra_outl(NFC_CMD1, cmd1);
-+ ra_outl(NFC_CMD3, cmd3);
-+ ra_outl(NFC_ADDR, bus_addr);
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+ ra_outl(NFC_ADDR2, bus_addr2);
-+#endif
-+ ra_outl(NFC_CONF, conf);
-+
-+ ret = _ra_nand_push_data(buf, len, 0);
-+ if (ret != len) {
-+ ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len);
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ ret = nfc_wait_ready(1); //write wait 1ms
-+ /* to prevent the DATA FIFO 's old data from next operation */
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer
-+
-+ if (ret & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * @return !0: fail
-+ * @return 0: OK
-+ */
-+int nfc_read_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags)
-+{
-+ unsigned int cmd1 = 0, cmd2 = 0, conf = 0;
-+ unsigned int bus_addr = 0, bus_addr2 = 0;
-+ unsigned int ecc_en;
-+ int use_gdma;
-+ int status;
-+
-+ int pages_perblock = 1<<(ra->erase_shift - ra->page_shift);
-+ // constrain of nfc read function
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+ BUG_ON (len > 60); //problem of rx-buffer overrun
-+#endif
-+ BUG_ON (offs >> ra->oob_shift); //page boundry
-+ BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) >
-+ ((page + pages_perblock) & ~(pages_perblock-1))); //block boundry
-+
-+ use_gdma = flags & FLAG_USE_GDMA;
-+ ecc_en = flags & FLAG_ECC_EN;
-+ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1));
-+
-+ if (is_nand_page_2048) {
-+ bus_addr += CFG_PAGESIZE;
-+ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+ cmd1 = 0x0;
-+ cmd2 = 0x30;
-+ conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ }
-+ else {
-+ cmd1 = 0x50;
-+ conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ }
-+ if (ecc_en)
-+ conf |= (1<<3);
-+ if (use_gdma)
-+ conf |= (1<<2);
-+
-+ ra_dbg("%s: cmd1:%x, bus_addr:%x, conf:%x, len:%x, flag:%x\n",
-+ __func__, cmd1, bus_addr, conf, len, flags);
-+
-+ status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf, len, flags);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail\n", __func__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * @return !0: fail
-+ * @return 0: OK
-+ */
-+int nfc_write_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags)
-+{
-+ unsigned int cmd1 = 0, cmd3=0, conf = 0;
-+ unsigned int bus_addr = 0, bus_addr2 = 0;
-+ int use_gdma;
-+ int status;
-+
-+ int pages_perblock = 1<<(ra->erase_shift - ra->page_shift);
-+ // constrain of nfc read function
-+
-+ BUG_ON (offs >> ra->oob_shift); //page boundry
-+ BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) >
-+ ((page + pages_perblock) & ~(pages_perblock-1))); //block boundry
-+
-+ use_gdma = flags & FLAG_USE_GDMA;
-+ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1));
-+
-+ if (is_nand_page_2048) {
-+ cmd1 = 0x80;
-+ cmd3 = 0x10;
-+ bus_addr += CFG_PAGESIZE;
-+ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+ conf = 0x001123 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20);
-+ }
-+ else {
-+ cmd1 = 0x08050;
-+ cmd3 = 0x10;
-+ conf = 0x001223 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20);
-+ }
-+ if (use_gdma)
-+ conf |= (1<<2);
-+
-+ // set NFC
-+ ra_dbg("%s: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n",
-+ __func__, cmd1, cmd3, bus_addr, conf, len);
-+
-+ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, len, flags);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags);
-+int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags);
-+
-+
-+#if !defined (WORKAROUND_RX_BUF_OV)
-+static int one_bit_correction(char *ecc, char *expected, int *bytes, int *bits);
-+int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode)
-+{
-+ int ret, i;
-+ char *p, *e;
-+ int ecc;
-+
-+ //ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode);
-+
-+ if (mode == FL_WRITING) {
-+ int len = CFG_PAGESIZE + CFG_PAGE_OOBSIZE;
-+ int conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ conf |= (1<<3); //(ecc_en)
-+ //conf |= (1<<2); // (use_gdma)
-+
-+ p = ra->readback_buffers;
-+ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN);
-+ if (ret == 0)
-+ goto ecc_check;
-+
-+ //FIXME, double comfirm
-+ printk("%s: read back fail, try again \n",__func__);
-+ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN);
-+ if (ret != 0) {
-+ printk("\t%s: read back fail agian \n",__func__);
-+ goto bad_block;
-+ }
-+ }
-+ else if (mode == FL_READING) {
-+ p = buf;
-+ }
-+ else
-+ return -2;
-+
-+ecc_check:
-+ p += CFG_PAGESIZE;
-+ if (!is_nand_page_2048) {
-+ ecc = ra_inl(NFC_ECC);
-+ if (ecc == 0) //clean page.
-+ return 0;
-+ e = (char*)&ecc;
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != (char)0xff)
-+ break;
-+ if (i == CONFIG_ECC_BYTES - 1) {
-+ printk("skip ecc 0xff at page %x\n", page);
-+ return 0;
-+ }
-+ }
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != *(e + i)) {
-+ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+ return -1;
-+ }
-+ }
-+ }
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+ else {
-+ int ecc2, ecc3, ecc4, qsz;
-+ char *e2, *e3, *e4;
-+ int correction_flag = 0;
-+ ecc = ra_inl(NFC_ECC_P1);
-+ ecc2 = ra_inl(NFC_ECC_P2);
-+ ecc3 = ra_inl(NFC_ECC_P3);
-+ ecc4 = ra_inl(NFC_ECC_P4);
-+ e = (char*)&ecc;
-+ e2 = (char*)&ecc2;
-+ e3 = (char*)&ecc3;
-+ e4 = (char*)&ecc4;
-+ qsz = CFG_PAGE_OOBSIZE / 4;
-+ if (ecc == 0 && ecc2 == 0 && ecc3 == 0 && ecc4 == 0)
-+ return 0;
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != (char)0xff)
-+ break;
-+ else if (*(p + eccpos + qsz) != (char)0xff)
-+ break;
-+ else if (*(p + eccpos + qsz*2) != (char)0xff)
-+ break;
-+ else if (*(p + eccpos + qsz*3) != (char)0xff)
-+ break;
-+ if (i == CONFIG_ECC_BYTES - 1) {
-+ printk("skip ecc 0xff at page %x\n", page);
-+ return 0;
-+ }
-+ }
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != *(e + i)) {
-+ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+ correction_flag |= 0x1;
-+ }
-+ if (*(p + eccpos + qsz) != *(e2 + i)) {
-+ printk("%s mode:%s, invalid ecc2, page: %x read:%x %x %x, ecc2:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+CONFIG_ECC_OFFSET+qsz), *(p+ CONFIG_ECC_OFFSET+1+qsz), *(p+ CONFIG_ECC_OFFSET+2+qsz), ecc2);
-+ correction_flag |= 0x2;
-+ }
-+ if (*(p + eccpos + qsz*2) != *(e3 + i)) {
-+ printk("%s mode:%s, invalid ecc3, page: %x read:%x %x %x, ecc3:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+CONFIG_ECC_OFFSET+qsz*2), *(p+ CONFIG_ECC_OFFSET+1+qsz*2), *(p+ CONFIG_ECC_OFFSET+2+qsz*2), ecc3);
-+ correction_flag |= 0x4;
-+ }
-+ if (*(p + eccpos + qsz*3) != *(e4 + i)) {
-+ printk("%s mode:%s, invalid ecc4, page: %x read:%x %x %x, ecc4:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+CONFIG_ECC_OFFSET+qsz*3), *(p+ CONFIG_ECC_OFFSET+1+qsz*3), *(p+ CONFIG_ECC_OFFSET+2+qsz*3), ecc4);
-+ correction_flag |= 0x8;
-+ }
-+ }
-+
-+ if (correction_flag)
-+ {
-+ printk("trying to do correction!\n");
-+ if (correction_flag & 0x1)
-+ {
-+ int bytes, bits;
-+ char *pBuf = p - CFG_PAGESIZE;
-+
-+ if (one_bit_correction(p + CONFIG_ECC_OFFSET, e, &bytes, &bits) == 0)
-+ {
-+ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+ printk("1. correct byte %d, bit %d!\n", bytes, bits);
-+ }
-+ else
-+ {
-+ printk("failed to correct!\n");
-+ return -1;
-+ }
-+ }
-+
-+ if (correction_flag & 0x2)
-+ {
-+ int bytes, bits;
-+ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/4;
-+
-+ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz), e2, &bytes, &bits) == 0)
-+ {
-+ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+ printk("2. correct byte %d, bit %d!\n", bytes, bits);
-+ }
-+ else
-+ {
-+ printk("failed to correct!\n");
-+ return -1;
-+ }
-+ }
-+ if (correction_flag & 0x4)
-+ {
-+ int bytes, bits;
-+ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/2;
-+
-+ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 2), e3, &bytes, &bits) == 0)
-+ {
-+ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+ printk("3. correct byte %d, bit %d!\n", bytes, bits);
-+ }
-+ else
-+ {
-+ printk("failed to correct!\n");
-+ return -1;
-+ }
-+ }
-+ if (correction_flag & 0x8)
-+ {
-+ int bytes, bits;
-+ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE*3/4;
-+
-+ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 3), e4, &bytes, &bits) == 0)
-+ {
-+ pBuf[bytes] = pBuf[bytes] ^ (1 << bits);
-+ printk("4. correct byte %d, bit %d!\n", bytes, bits);
-+ }
-+ else
-+ {
-+ printk("failed to correct!\n");
-+ return -1;
-+ }
-+ }
-+ }
-+
-+ }
-+#endif
-+ return 0;
-+
-+bad_block:
-+ return -1;
-+}
-+
-+#else
-+
-+void ranfc_dump(void)
-+{
-+ int i;
-+ for (i=0; i<11; i++) {
-+ if (i==6)
-+ continue;
-+ printk("%x: %x \n", NFC_BASE + i*4, ra_inl(NFC_BASE + i*4));
-+ }
-+}
-+
-+/**
-+ * @return 0, ecc OK or corrected.
-+ * @return NAND_STATUS_FAIL, ecc fail.
-+ */
-+
-+int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode)
-+{
-+ int ret, i;
-+ char *p, *e;
-+ int ecc;
-+
-+ if (ranfc_verify == 0)
-+ return 0;
-+
-+ ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode);
-+
-+ if (mode == FL_WRITING) { // read back and memcmp
-+ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE);
-+ if (ret != 0) //double comfirm
-+ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE);
-+
-+ if (ret != 0) {
-+ printk("%s: mode:%x read back fail \n", __func__, mode);
-+ return -1;
-+ }
-+ return memcmp(buf, ra->readback_buffers, 1<<ra->page_shift);
-+ }
-+
-+ if (mode == FL_READING) {
-+#if 0
-+ if (ra->sandbox_page == 0)
-+ return 0;
-+
-+ ret = nfc_write_page(ra, buf, ra->sandbox_page, FLAG_USE_GDMA | FLAG_ECC_EN);
-+ if (ret != 0) {
-+ printk("%s, fail write sandbox_page \n", __func__);
-+ return -1;
-+ }
-+#else
-+ /** @note:
-+ * The following command is actually not 'write' command to drive NFC to write flash.
-+ * However, it can make NFC to calculate ECC, that will be used to compare with original ones.
-+ * --YT
-+ */
-+ unsigned int conf = 0x001223| (CFG_ADDR_CYCLE<<16) | (0x200 << 20) | (1<<3) | (1<<2);
-+ _nfc_write_raw_data(0xff, 0xff, ra->sandbox_page<<ra->page_shift, conf, buf, 0x200, FLAG_USE_GDMA);
-+#endif
-+
-+ ecc = ra_inl(NFC_ECC);
-+ if (ecc == 0) //clean page.
-+ return 0;
-+ e = (char*)&ecc;
-+ p = buf + (1<<ra->page_shift);
-+ for (i=0; i<CONFIG_ECC_BYTES; i++) {
-+ int eccpos = CONFIG_ECC_OFFSET + i;
-+ if (*(p + eccpos) != *(e + i)) {
-+ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, write:%x \n",
-+ __func__, (mode == FL_READING)?"read":"write", page,
-+ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc);
-+
-+ for (i=0; i<528; i++)
-+ printk("%-2x \n", *(buf + i));
-+ return -1;
-+ }
-+ }
-+ return 0;
-+ }
-+
-+ return -1;
-+
-+}
-+
-+#endif
-+
-+
-+/**
-+ * @return -EIO, writing size is less than a page
-+ * @return 0, OK
-+ */
-+int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags)
-+{
-+ unsigned int cmd1 = 0, cmd2 = 0, conf = 0;
-+ unsigned int bus_addr = 0, bus_addr2 = 0;
-+ unsigned int ecc_en;
-+ int use_gdma;
-+ int size, offs;
-+ int status = 0;
-+
-+ use_gdma = flags & FLAG_USE_GDMA;
-+ ecc_en = flags & FLAG_ECC_EN;
-+
-+ page = page & (CFG_CHIPSIZE - 1); // chip boundary
-+ size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize
-+ offs = 0;
-+
-+ while (size > 0) {
-+ int len;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+ len = min(60, size);
-+#else
-+ len = size;
-+#endif
-+ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8)-1));
-+ if (is_nand_page_2048) {
-+ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+ cmd1 = 0x0;
-+ cmd2 = 0x30;
-+ conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ }
-+ else {
-+ if (offs & ~(CFG_PAGESIZE-1))
-+ cmd1 = 0x50;
-+ else if (offs & ~((1<<CFG_COLUMN_ADDR_CYCLE*8)-1))
-+ cmd1 = 0x01;
-+ else
-+ cmd1 = 0;
-+
-+ conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20);
-+ }
-+#if !defined (WORKAROUND_RX_BUF_OV)
-+ if (ecc_en)
-+ conf |= (1<<3);
-+#endif
-+ if (use_gdma)
-+ conf |= (1<<2);
-+
-+ status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf+offs, len, flags);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return -EIO;
-+ }
-+
-+ offs += len;
-+ size -= len;
-+ }
-+
-+ // verify and correct ecc
-+ if ((flags & (FLAG_VERIFY | FLAG_ECC_EN)) == (FLAG_VERIFY | FLAG_ECC_EN)) {
-+ status = nfc_ecc_verify(ra, buf, page, FL_READING);
-+ if (status != 0) {
-+ printk("%s: fail, buf:%x, page:%x, flag:%x\n",
-+ __func__, (unsigned int)buf, page, flags);
-+ return -EBADMSG;
-+ }
-+ }
-+ else {
-+ // fix,e not yet support
-+ ra->buffers_page = -1; //cached
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/**
-+ * @return -EIO, fail to write
-+ * @return 0, OK
-+ */
-+int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags)
-+{
-+ unsigned int cmd1 = 0, cmd3, conf = 0;
-+ unsigned int bus_addr = 0, bus_addr2 = 0;
-+ unsigned int ecc_en;
-+ int use_gdma;
-+ int size;
-+ char status;
-+ uint8_t *oob = buf + (1<<ra->page_shift);
-+
-+ use_gdma = flags & FLAG_USE_GDMA;
-+ ecc_en = flags & FLAG_ECC_EN;
-+
-+ oob[ra->badblockpos] = 0xff; //tag as good block.
-+ ra->buffers_page = -1; //cached
-+
-+ page = page & (CFG_CHIPSIZE-1); //chip boundary
-+ size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize
-+ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)); //write_page always write from offset 0.
-+
-+ if (is_nand_page_2048) {
-+ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8);
-+ cmd1 = 0x80;
-+ cmd3 = 0x10;
-+ conf = 0x001123| ((CFG_ADDR_CYCLE)<<16) | (size << 20);
-+ }
-+ else {
-+ cmd1 = 0x8000;
-+ cmd3 = 0x10;
-+ conf = 0x001223| ((CFG_ADDR_CYCLE)<<16) | (size << 20);
-+}
-+ if (ecc_en)
-+ conf |= (1<<3); //enable ecc
-+ if (use_gdma)
-+ conf |= (1<<2);
-+
-+ // set NFC
-+ ra_dbg("nfc_write_page: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n",
-+ cmd1, cmd3, bus_addr, conf, size);
-+
-+ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk("%s: fail \n", __func__);
-+ return -EIO;
-+ }
-+
-+
-+ if (flags & FLAG_VERIFY) { // verify and correct ecc
-+ status = nfc_ecc_verify(ra, buf, page, FL_WRITING);
-+
-+#ifdef RANDOM_GEN_BAD_BLOCK
-+ if (((random32() & 0x1ff) == 0x0) && (page >= 0x100)) // randomly create bad block
-+ {
-+ printk("hmm... create a bad block at page %x\n", (bus_addr >> 16));
-+ status = -1;
-+ }
-+#endif
-+
-+ if (status != 0) {
-+ printk("%s: ecc_verify fail: ret:%x \n", __func__, status);
-+ oob[ra->badblockpos] = 0x33;
-+ page -= page % (CFG_BLOCKSIZE/CFG_PAGESIZE);
-+ printk("create a bad block at page %x\n", page);
-+ if (!is_nand_page_2048)
-+ status = nfc_write_oob(ra, page, ra->badblockpos, oob+ra->badblockpos, 1, flags);
-+ else
-+ {
-+ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags);
-+ nfc_write_oob(ra, page, 0, oob, 16, FLAG_NONE);
-+ }
-+ return -EBADMSG;
-+ }
-+ }
-+
-+
-+ ra->buffers_page = page; //cached
-+ return 0;
-+}
-+
-+
-+
-+/*************************************************************
-+ * nand internal process
-+ *************************************************************/
-+
-+/**
-+ * nand_release_device - [GENERIC] release chip
-+ * @mtd: MTD device structure
-+ *
-+ * Deselect, release chip lock and wake up anyone waiting on the device
-+ */
-+static void nand_release_device(struct ra_nand_chip *ra)
-+{
-+ /* De-select the NAND device */
-+ nfc_select_chip(ra, -1);
-+
-+ /* Release the controller and the chip */
-+ ra->state = FL_READY;
-+
-+ mutex_unlock(ra->controller);
-+}
-+
-+/**
-+ * nand_get_device - [GENERIC] Get chip for selected access
-+ * @chip: the nand chip descriptor
-+ * @mtd: MTD device structure
-+ * @new_state: the state which is requested
-+ *
-+ * Get the device and lock it for exclusive access
-+ */
-+static int
-+nand_get_device(struct ra_nand_chip *ra, int new_state)
-+{
-+ int ret = 0;
-+
-+ ret = mutex_lock_interruptible(ra->controller);
-+ if (!ret)
-+ ra->state = new_state;
-+
-+ return ret;
-+
-+}
-+
-+
-+
-+/*************************************************************
-+ * nand internal process
-+ *************************************************************/
-+
-+int nand_bbt_get(struct ra_nand_chip *ra, int block)
-+{
-+ int byte, bits;
-+ bits = block * BBTTAG_BITS;
-+
-+ byte = bits / 8;
-+ bits = bits % 8;
-+
-+ return (ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK;
-+}
-+
-+int nand_bbt_set(struct ra_nand_chip *ra, int block, int tag)
-+{
-+ int byte, bits;
-+ bits = block * BBTTAG_BITS;
-+
-+ byte = bits / 8;
-+ bits = bits % 8;
-+
-+ // If previous tag is bad, dont overwrite it
-+ if (((ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK) == BBT_TAG_BAD)
-+ {
-+ return BBT_TAG_BAD;
-+ }
-+
-+ ra->bbt[byte] = (ra->bbt[byte] & ~(BBTTAG_BITS_MASK << bits)) | ((tag & BBTTAG_BITS_MASK) << bits);
-+
-+ return tag;
-+}
-+
-+/**
-+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ *
-+ * Check, if the block is bad. Either by reading the bad block table or
-+ * calling of the scan function.
-+ */
-+int nand_block_checkbad(struct ra_nand_chip *ra, loff_t offs)
-+{
-+ int page, block;
-+ int ret = 4;
-+ unsigned int tag;
-+ char *str[]= {"UNK", "RES", "BAD", "GOOD"};
-+
-+ if (ranfc_bbt == 0)
-+ return 0;
-+
-+ {
-+ // align with chip
-+
-+ offs = offs & ((1<<ra->chip_shift) -1);
-+
-+ page = offs >> ra->page_shift;
-+ block = offs >> ra->erase_shift;
-+ }
-+
-+ tag = nand_bbt_get(ra, block);
-+
-+ if (tag == BBT_TAG_UNKNOWN) {
-+ ret = nfc_read_oob(ra, page, ra->badblockpos, (char*)&tag, 1, FLAG_NONE);
-+ if (ret == 0)
-+ tag = ((le32_to_cpu(tag) & 0x0ff) == 0x0ff) ? BBT_TAG_GOOD : BBT_TAG_BAD;
-+ else
-+ tag = BBT_TAG_BAD;
-+
-+ nand_bbt_set(ra, block, tag);
-+ }
-+
-+ if (tag != BBT_TAG_GOOD) {
-+ printk("%s: offs:%x tag: %s \n", __func__, (unsigned int)offs, str[tag]);
-+ return 1;
-+ }
-+ else
-+ return 0;
-+
-+}
-+
-+
-+
-+/**
-+ * nand_block_markbad -
-+ */
-+int nand_block_markbad(struct ra_nand_chip *ra, loff_t offs)
-+{
-+ int page, block;
-+ int ret = 4;
-+ unsigned int tag;
-+ char *ecc;
-+
-+ // align with chip
-+ ra_dbg("%s offs: %x \n", __func__, (int)offs);
-+
-+ offs = offs & ((1<<ra->chip_shift) -1);
-+
-+ page = offs >> ra->page_shift;
-+ block = offs >> ra->erase_shift;
-+
-+ tag = nand_bbt_get(ra, block);
-+
-+ if (tag == BBT_TAG_BAD) {
-+ printk("%s: mark repeatedly \n", __func__);
-+ return 0;
-+ }
-+
-+ // new tag as bad
-+ tag =BBT_TAG_BAD;
-+ ret = nfc_read_page(ra, ra->buffers, page, FLAG_NONE);
-+ if (ret != 0) {
-+ printk("%s: fail to read bad block tag \n", __func__);
-+ goto tag_bbt;
-+ }
-+
-+ ecc = &ra->buffers[(1<<ra->page_shift)+ra->badblockpos];
-+ if (*ecc == (char)0x0ff) {
-+ //tag into flash
-+ *ecc = (char)tag;
-+ ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA);
-+ if (ret)
-+ printk("%s: fail to write bad block tag \n", __func__);
-+
-+ }
-+
-+tag_bbt:
-+ //update bbt
-+ nand_bbt_set(ra, block, tag);
-+
-+ return 0;
-+}
-+
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+/**
-+ * to find a bad block for ecc verify of read_page
-+ */
-+unsigned int nand_bbt_find_sandbox(struct ra_nand_chip *ra)
-+{
-+ loff_t offs = 0;
-+ int chipsize = 1 << ra->chip_shift;
-+ int blocksize = 1 << ra->erase_shift;
-+
-+
-+ while (offs < chipsize) {
-+ if (nand_block_checkbad(ra, offs)) //scan and verify the unknown tag
-+ break;
-+ offs += blocksize;
-+ }
-+
-+ if (offs >= chipsize) {
-+ offs = chipsize - blocksize;
-+ }
-+
-+ nand_bbt_set(ra, (unsigned int)offs>>ra->erase_shift, BBT_TAG_RES); // tag bbt only, instead of update badblockpos of flash.
-+ return (offs >> ra->page_shift);
-+}
-+#endif
-+
-+
-+
-+/**
-+ * nand_erase_nand - [Internal] erase block(s)
-+ * @mtd: MTD device structure
-+ * @instr: erase instruction
-+ * @allowbbt: allow erasing the bbt area
-+ *
-+ * Erase one ore more blocks
-+ */
-+int _nand_erase_nand(struct ra_nand_chip *ra, struct erase_info *instr)
-+{
-+ int page, len, status, ret;
-+ unsigned int addr, blocksize = 1<<ra->erase_shift;
-+
-+ ra_dbg("%s: start:%x, len:%x \n", __func__,
-+ (unsigned int)instr->addr, (unsigned int)instr->len);
-+
-+//#define BLOCK_ALIGNED(a) ((a) & (blocksize - 1)) // already defined
-+
-+ if (BLOCK_ALIGNED(instr->addr) || BLOCK_ALIGNED(instr->len)) {
-+ ra_dbg("%s: erase block not aligned, addr:%x len:%x\n", __func__, instr->addr, instr->len);
-+ return -EINVAL;
-+ }
-+
-+ instr->fail_addr = 0xffffffff;
-+
-+ len = instr->len;
-+ addr = instr->addr;
-+ instr->state = MTD_ERASING;
-+
-+ while (len) {
-+
-+ page = (int)(addr >> ra->page_shift);
-+
-+ /* select device and check wp */
-+ if (nfc_enable_chip(ra, addr, 0)) {
-+ printk("%s: nand is write protected \n", __func__);
-+ instr->state = MTD_ERASE_FAILED;
-+ goto erase_exit;
-+ }
-+
-+ /* if we have a bad block, we do not erase bad blocks */
-+ if (nand_block_checkbad(ra, addr)) {
-+ printk(KERN_WARNING "nand_erase: attempt to erase a "
-+ "bad block at 0x%08x\n", addr);
-+ instr->state = MTD_ERASE_FAILED;
-+ goto erase_exit;
-+ }
-+
-+ /*
-+ * Invalidate the page cache, if we erase the block which
-+ * contains the current cached page
-+ */
-+ if (BLOCK_ALIGNED(addr) == BLOCK_ALIGNED(ra->buffers_page << ra->page_shift))
-+ ra->buffers_page = -1;
-+
-+ status = nfc_erase_block(ra, page);
-+ /* See if block erase succeeded */
-+ if (status) {
-+ printk("%s: failed erase, page 0x%08x\n", __func__, page);
-+ instr->state = MTD_ERASE_FAILED;
-+ instr->fail_addr = (page << ra->page_shift);
-+ goto erase_exit;
-+ }
-+
-+
-+ /* Increment page address and decrement length */
-+ len -= blocksize;
-+ addr += blocksize;
-+
-+ }
-+ instr->state = MTD_ERASE_DONE;
-+
-+erase_exit:
-+
-+ ret = ((instr->state == MTD_ERASE_DONE) ? 0 : -EIO);
-+ /* Do call back function */
-+ if (!ret)
-+ mtd_erase_callback(instr);
-+
-+ if (ret) {
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+ }
-+
-+ /* Return more or less happy */
-+ return ret;
-+}
-+
-+static int
-+nand_write_oob_buf(struct ra_nand_chip *ra, uint8_t *buf, uint8_t *oob, size_t size,
-+ int mode, int ooboffs)
-+{
-+ size_t oobsize = 1<<ra->oob_shift;
-+ struct nand_oobfree *free;
-+ uint32_t woffs = ooboffs;
-+ int retsize = 0;
-+
-+ ra_dbg("%s: size:%x, mode:%x, offs:%x \n", __func__, size, mode, ooboffs);
-+
-+ switch(mode) {
-+ case MTD_OPS_PLACE_OOB:
-+ case MTD_OPS_RAW:
-+ if (ooboffs > oobsize)
-+ return -1;
-+
-+ size = min(size, oobsize - ooboffs);
-+ memcpy(buf + ooboffs, oob, size);
-+ retsize = size;
-+ break;
-+
-+ case MTD_OPS_AUTO_OOB:
-+ if (ooboffs > ra->oob->oobavail)
-+ return -1;
-+
-+ while (size) {
-+ for(free = ra->oob->oobfree; free->length && size; free++) {
-+ int wlen = free->length - woffs;
-+ int bytes = 0;
-+
-+ /* Write request not from offset 0 ? */
-+ if (wlen <= 0) {
-+ woffs = -wlen;
-+ continue;
-+ }
-+
-+ bytes = min_t(size_t, size, wlen);
-+ memcpy (buf + free->offset + woffs, oob, bytes);
-+ woffs = 0;
-+ oob += bytes;
-+ size -= bytes;
-+ retsize += bytes;
-+ }
-+ buf += oobsize;
-+ }
-+ break;
-+
-+ default:
-+ BUG();
-+ }
-+
-+ return retsize;
-+}
-+
-+static int nand_read_oob_buf(struct ra_nand_chip *ra, uint8_t *oob, size_t size,
-+ int mode, int ooboffs)
-+{
-+ size_t oobsize = 1<<ra->oob_shift;
-+ uint8_t *buf = ra->buffers + (1<<ra->page_shift);
-+ int retsize=0;
-+
-+ ra_dbg("%s: size:%x, mode:%x, offs:%x \n", __func__, size, mode, ooboffs);
-+
-+ switch(mode) {
-+ case MTD_OPS_PLACE_OOB:
-+ case MTD_OPS_RAW:
-+ if (ooboffs > oobsize)
-+ return -1;
-+
-+ size = min(size, oobsize - ooboffs);
-+ memcpy(oob, buf + ooboffs, size);
-+ return size;
-+
-+ case MTD_OPS_AUTO_OOB: {
-+ struct nand_oobfree *free;
-+ uint32_t woffs = ooboffs;
-+
-+ if (ooboffs > ra->oob->oobavail)
-+ return -1;
-+
-+ size = min(size, ra->oob->oobavail - ooboffs);
-+ for(free = ra->oob->oobfree; free->length && size; free++) {
-+ int wlen = free->length - woffs;
-+ int bytes = 0;
-+
-+ /* Write request not from offset 0 ? */
-+ if (wlen <= 0) {
-+ woffs = -wlen;
-+ continue;
-+ }
-+
-+ bytes = min_t(size_t, size, wlen);
-+ memcpy (oob, buf + free->offset + woffs, bytes);
-+ woffs = 0;
-+ oob += bytes;
-+ size -= bytes;
-+ retsize += bytes;
-+ }
-+ return retsize;
-+ }
-+ default:
-+ BUG();
-+ }
-+
-+ return -1;
-+}
-+
-+/**
-+ * nand_do_write_ops - [Internal] NAND write with ECC
-+ * @mtd: MTD device structure
-+ * @to: offset to write to
-+ * @ops: oob operations description structure
-+ *
-+ * NAND write with ECC
-+ */
-+static int nand_do_write_ops(struct ra_nand_chip *ra, loff_t to,
-+ struct mtd_oob_ops *ops)
-+{
-+ int page;
-+ uint32_t datalen = ops->len;
-+ uint32_t ooblen = ops->ooblen;
-+ uint8_t *oob = ops->oobbuf;
-+ uint8_t *data = ops->datbuf;
-+ int pagesize = (1<<ra->page_shift);
-+ int pagemask = (pagesize -1);
-+ int oobsize = 1<<ra->oob_shift;
-+ loff_t addr = to;
-+ //int i = 0; //for ra_dbg only
-+
-+ ra_dbg("%s: to:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x oobmode:%x \n",
-+ __func__, (unsigned int)to, data, oob, datalen, ooblen, ops->ooboffs, ops->mode);
-+
-+ ops->retlen = 0;
-+ ops->oobretlen = 0;
-+
-+
-+ /* Invalidate the page cache, when we write to the cached page */
-+ ra->buffers_page = -1;
-+
-+
-+ if (data ==0)
-+ datalen = 0;
-+
-+ // oob sequential (burst) write
-+ if (datalen == 0 && ooblen) {
-+ int len = ((ooblen + ops->ooboffs) + (ra->oob->oobavail - 1)) / ra->oob->oobavail * oobsize;
-+
-+ /* select chip, and check if it is write protected */
-+ if (nfc_enable_chip(ra, addr, 0))
-+ return -EIO;
-+
-+ //FIXME, need sanity check of block boundary
-+ page = (int)((to & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary
-+ memset(ra->buffers, 0x0ff, pagesize);
-+ //fixme, should we reserve the original content?
-+ if (ops->mode == MTD_OPS_AUTO_OOB) {
-+ nfc_read_oob(ra, page, 0, ra->buffers, len, FLAG_NONE);
-+ }
-+ //prepare buffers
-+ if (ooblen != 8)
-+ {
-+ nand_write_oob_buf(ra, ra->buffers, oob, ooblen, ops->mode, ops->ooboffs);
-+ // write out buffer to chip
-+ nfc_write_oob(ra, page, 0, ra->buffers, len, FLAG_USE_GDMA);
-+ }
-+
-+ ops->oobretlen = ooblen;
-+ ooblen = 0;
-+ }
-+
-+ // data sequential (burst) write
-+ if (datalen && ooblen == 0) {
-+ // ranfc can not support write_data_burst, since hw-ecc and fifo constraints..
-+ }
-+
-+ // page write
-+ while(datalen || ooblen) {
-+ int len;
-+ int ret;
-+ int offs;
-+ int ecc_en = 0;
-+
-+ ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
-+ __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+
-+ page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary
-+
-+ /* select chip, and check if it is write protected */
-+ if (nfc_enable_chip(ra, addr, 0))
-+ return -EIO;
-+
-+ // oob write
-+ if (ops->mode == MTD_OPS_AUTO_OOB) {
-+ //fixme, this path is not yet varified
-+ nfc_read_oob(ra, page, 0, ra->buffers + pagesize, oobsize, FLAG_NONE);
-+ }
-+ if (oob && ooblen > 0) {
-+ len = nand_write_oob_buf(ra, ra->buffers + pagesize, oob, ooblen, ops->mode, ops->ooboffs);
-+ if (len < 0)
-+ return -EINVAL;
-+
-+ oob += len;
-+ ops->oobretlen += len;
-+ ooblen -= len;
-+ }
-+
-+ // data write
-+ offs = addr & pagemask;
-+ len = min_t(size_t, datalen, pagesize - offs);
-+ if (data && len > 0) {
-+ memcpy(ra->buffers + offs, data, len); // we can not sure ops->buf wether is DMA-able.
-+
-+ data += len;
-+ datalen -= len;
-+ ops->retlen += len;
-+
-+ ecc_en = FLAG_ECC_EN;
-+ }
-+ ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA | FLAG_VERIFY |
-+ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0 : ecc_en ));
-+ if (ret) {
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+ return ret;
-+ }
-+
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD);
-+
-+ addr = (page+1) << ra->page_shift;
-+
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * nand_do_read_ops - [Internal] Read data with ECC
-+ *
-+ * @mtd: MTD device structure
-+ * @from: offset to read from
-+ * @ops: oob ops structure
-+ *
-+ * Internal function. Called with chip held.
-+ */
-+static int nand_do_read_ops(struct ra_nand_chip *ra, loff_t from,
-+ struct mtd_oob_ops *ops)
-+{
-+ int page;
-+ uint32_t datalen = ops->len;
-+ uint32_t ooblen = ops->ooblen;
-+ uint8_t *oob = ops->oobbuf;
-+ uint8_t *data = ops->datbuf;
-+ int pagesize = (1<<ra->page_shift);
-+ int pagemask = (pagesize -1);
-+ loff_t addr = from;
-+ //int i = 0; //for ra_dbg only
-+
-+ ra_dbg("%s: addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
-+ __func__, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+
-+ ops->retlen = 0;
-+ ops->oobretlen = 0;
-+ if (data == 0)
-+ datalen = 0;
-+
-+
-+ while(datalen || ooblen) {
-+ int len;
-+ int ret;
-+ int offs;
-+
-+ ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n",
-+ __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs);
-+ /* select chip */
-+ if (nfc_enable_chip(ra, addr, 1) < 0)
-+ return -EIO;
-+
-+ page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift);
-+
-+ ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY |
-+ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN ));
-+ //FIXME, something strange here, some page needs 2 more tries to guarantee read success.
-+ if (ret) {
-+ printk("read again:\n");
-+ ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY |
-+ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN ));
-+
-+ if (ret) {
-+ printk("read again fail \n");
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD);
-+ if ((ret != -EUCLEAN) && (ret != -EBADMSG)) {
-+ return ret;
-+ }
-+ else {
-+ /* ecc verification fail, but data need to be returned. */
-+ }
-+ }
-+ else {
-+ printk(" read agian susccess \n");
-+ }
-+ }
-+
-+ // oob read
-+ if (oob && ooblen > 0) {
-+ len = nand_read_oob_buf(ra, oob, ooblen, ops->mode, ops->ooboffs);
-+ if (len < 0) {
-+ printk("nand_read_oob_buf: fail return %x \n", len);
-+ return -EINVAL;
-+ }
-+
-+ oob += len;
-+ ops->oobretlen += len;
-+ ooblen -= len;
-+ }
-+
-+ // data read
-+ offs = addr & pagemask;
-+ len = min_t(size_t, datalen, pagesize - offs);
-+ if (data && len > 0) {
-+ memcpy(data, ra->buffers + offs, len); // we can not sure ops->buf wether is DMA-able.
-+
-+ data += len;
-+ datalen -= len;
-+ ops->retlen += len;
-+ if (ret)
-+ return ret;
-+ }
-+
-+
-+ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD);
-+ // address go further to next page, instead of increasing of length of write. This avoids some special cases wrong.
-+ addr = (page+1) << ra->page_shift;
-+ }
-+ return 0;
-+}
-+
-+static int
-+ramtd_nand_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct ra_nand_chip *ra = (struct ra_nand_chip *)mtd->priv;
-+ int ret;
-+
-+ ra_dbg("%s: start:%x, len:%x \n", __func__,
-+ (unsigned int)instr->addr, (unsigned int)instr->len);
-+
-+ nand_get_device(ra, FL_ERASING);
-+ ret = _nand_erase_nand((struct ra_nand_chip *)mtd->priv, instr);
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+static int
-+ramtd_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t *retlen, const uint8_t *buf)
-+{
-+ struct ra_nand_chip *ra = mtd->priv;
-+ struct mtd_oob_ops ops;
-+ int ret;
-+
-+ ra_dbg("%s: to 0x%x len=0x%x\n", __func__, to, len);
-+
-+ if ((to + len) > mtd->size)
-+ return -EINVAL;
-+
-+ if (!len)
-+ return 0;
-+
-+ nand_get_device(ra, FL_WRITING);
-+
-+ memset(&ops, 0, sizeof(ops));
-+ ops.len = len;
-+ ops.datbuf = (uint8_t *)buf;
-+ ops.oobbuf = NULL;
-+ ops.mode = MTD_OPS_AUTO_OOB;
-+
-+ ret = nand_do_write_ops(ra, to, &ops);
-+
-+ *retlen = ops.retlen;
-+
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+static int
-+ramtd_nand_read(struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t *retlen, uint8_t *buf)
-+{
-+
-+ struct ra_nand_chip *ra = mtd->priv;
-+ int ret;
-+ struct mtd_oob_ops ops;
-+
-+ ra_dbg("%s: mtd:%p from:%x, len:%x, buf:%p \n", __func__, mtd, (unsigned int)from, len, buf);
-+
-+ /* Do not allow reads past end of device */
-+ if ((from + len) > mtd->size)
-+ return -EINVAL;
-+ if (!len)
-+ return 0;
-+
-+ nand_get_device(ra, FL_READING);
-+
-+ memset(&ops, 0, sizeof(ops));
-+ ops.len = len;
-+ ops.datbuf = buf;
-+ ops.oobbuf = NULL;
-+ ops.mode = MTD_OPS_AUTO_OOB;
-+
-+ ret = nand_do_read_ops(ra, from, &ops);
-+
-+ *retlen = ops.retlen;
-+
-+ nand_release_device(ra);
-+
-+ return ret;
-+
-+}
-+
-+static int
-+ramtd_nand_readoob(struct mtd_info *mtd, loff_t from,
-+ struct mtd_oob_ops *ops)
-+{
-+ struct ra_nand_chip *ra = mtd->priv;
-+ int ret;
-+
-+ ra_dbg("%s: \n", __func__);
-+
-+ nand_get_device(ra, FL_READING);
-+
-+ ret = nand_do_read_ops(ra, from, ops);
-+
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+static int
-+ramtd_nand_writeoob(struct mtd_info *mtd, loff_t to,
-+ struct mtd_oob_ops *ops)
-+{
-+ struct ra_nand_chip *ra = mtd->priv;
-+ int ret;
-+
-+ nand_get_device(ra, FL_READING);
-+ ret = nand_do_write_ops(ra, to, ops);
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+static int
-+ramtd_nand_block_isbad(struct mtd_info *mtd, loff_t offs)
-+{
-+ if (offs > mtd->size)
-+ return -EINVAL;
-+
-+ return nand_block_checkbad((struct ra_nand_chip *)mtd->priv, offs);
-+}
-+
-+static int
-+ramtd_nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct ra_nand_chip *ra = mtd->priv;
-+ int ret;
-+
-+ ra_dbg("%s: \n", __func__);
-+ nand_get_device(ra, FL_WRITING);
-+ ret = nand_block_markbad(ra, ofs);
-+ nand_release_device(ra);
-+
-+ return ret;
-+}
-+
-+// 1-bit error detection
-+static int one_bit_correction(char *ecc1, char *ecc2, int *bytes, int *bits)
-+{
-+ // check if ecc and expected are all valid
-+ char *p, nibble, crumb;
-+ int i, xor, iecc1 = 0, iecc2 = 0;
-+
-+ printk("correction : %x %x %x\n", ecc1[0], ecc1[1], ecc1[2]);
-+ printk("correction : %x %x %x\n", ecc2[0], ecc2[1], ecc2[2]);
-+
-+ p = (char *)ecc1;
-+ for (i = 0; i < CONFIG_ECC_BYTES; i++)
-+ {
-+ nibble = *(p+i) & 0xf;
-+ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+ return -1;
-+ nibble = ((*(p+i)) >> 4) & 0xf;
-+ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+ return -1;
-+ }
-+
-+ p = (char *)ecc2;
-+ for (i = 0; i < CONFIG_ECC_BYTES; i++)
-+ {
-+ nibble = *(p+i) & 0xf;
-+ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+ return -1;
-+ nibble = ((*(p+i)) >> 4) & 0xf;
-+ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) &&
-+ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9))
-+ return -1;
-+ }
-+
-+ memcpy(&iecc1, ecc1, 3);
-+ memcpy(&iecc2, ecc2, 3);
-+
-+ xor = iecc1 ^ iecc2;
-+ printk("xor = %x (%x %x)\n", xor, iecc1, iecc2);
-+
-+ *bytes = 0;
-+ for (i = 0; i < 9; i++)
-+ {
-+ crumb = (xor >> (2*i)) & 0x3;
-+ if ((crumb == 0x0) || (crumb == 0x3))
-+ return -1;
-+ if (crumb == 0x2)
-+ *bytes += (1 << i);
-+ }
-+
-+ *bits = 0;
-+ for (i = 0; i < 3; i++)
-+ {
-+ crumb = (xor >> (18 + 2*i)) & 0x3;
-+ if ((crumb == 0x0) || (crumb == 0x3))
-+ return -1;
-+ if (crumb == 0x2)
-+ *bits += (1 << i);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+
-+/************************************************************
-+ * the init/exit section.
-+ */
-+
-+static struct nand_ecclayout ra_oob_layout = {
-+ .eccbytes = CONFIG_ECC_BYTES,
-+ .eccpos = {5, 6, 7},
-+ .oobfree = {
-+ {.offset = 0, .length = 4},
-+ {.offset = 8, .length = 8},
-+ {.offset = 0, .length = 0}
-+ },
-+#define RA_CHIP_OOB_AVAIL (4+8)
-+ .oobavail = RA_CHIP_OOB_AVAIL,
-+ // 5th byte is bad-block flag.
-+};
-+
-+static int
-+mtk_nand_probe(struct platform_device *pdev)
-+{
-+ struct mtd_part_parser_data ppdata;
-+ struct ra_nand_chip *ra;
-+ int alloc_size, bbt_size, buffers_size, reg, err;
-+ unsigned char chip_mode = 12;
-+
-+/* if(ra_check_flash_type()!=BOOT_FROM_NAND) {
-+ return 0;
-+ }*/
-+
-+ //FIXME: config 512 or 2048-byte page according to HWCONF
-+#if defined (CONFIG_RALINK_RT6855A)
-+ reg = ra_inl(RALINK_SYSCTL_BASE+0x8c);
-+ chip_mode = ((reg>>28) & 0x3)|(((reg>>22) & 0x3)<<2);
-+ if (chip_mode == 1) {
-+ printk("! nand 2048\n");
-+ ra_or(NFC_CONF1, 1);
-+ is_nand_page_2048 = 1;
-+ nand_addrlen = 5;
-+ }
-+ else {
-+ printk("! nand 512\n");
-+ ra_and(NFC_CONF1, ~1);
-+ is_nand_page_2048 = 0;
-+ nand_addrlen = 4;
-+ }
-+#elif (defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855))
-+ ra_outl(RALINK_SYSCTL_BASE+0x60, ra_inl(RALINK_SYSCTL_BASE+0x60) & ~(0x3<<18));
-+ reg = ra_inl(RALINK_SYSCTL_BASE+0x10);
-+ chip_mode = (reg & 0x0F);
-+ if((chip_mode==1)||(chip_mode==11)) {
-+ ra_or(NFC_CONF1, 1);
-+ is_nand_page_2048 = 1;
-+ nand_addrlen = ((chip_mode!=11) ? 4 : 5);
-+ printk("!!! nand page size = 2048, addr len=%d\n", nand_addrlen);
-+ }
-+ else {
-+ ra_and(NFC_CONF1, ~1);
-+ is_nand_page_2048 = 0;
-+ nand_addrlen = ((chip_mode!=10) ? 3 : 4);
-+ printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen);
-+ }
-+#else
-+ is_nand_page_2048 = 0;
-+ nand_addrlen = 3;
-+ printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen);
-+#endif
-+
-+#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855)
-+ //config ECC location
-+ ra_and(NFC_CONF1, 0xfff000ff);
-+ ra_or(NFC_CONF1, ((CONFIG_ECC_OFFSET + 2) << 16) +
-+ ((CONFIG_ECC_OFFSET + 1) << 12) +
-+ (CONFIG_ECC_OFFSET << 8));
-+#endif
-+
-+#define ALIGNE_16(a) (((unsigned long)(a)+15) & ~15)
-+ buffers_size = ALIGNE_16((1<<CONFIG_PAGE_SIZE_BIT) + (1<<CONFIG_OOBSIZE_PER_PAGE_BIT)); //ra->buffers
-+ bbt_size = BBTTAG_BITS * (1<<(CONFIG_CHIP_SIZE_BIT - (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))) / 8; //ra->bbt
-+ bbt_size = ALIGNE_16(bbt_size);
-+
-+ alloc_size = buffers_size + bbt_size;
-+ alloc_size += buffers_size; //for ra->readback_buffers
-+ alloc_size += sizeof(*ra);
-+ alloc_size += sizeof(*ranfc_mtd);
-+
-+ //make sure gpio-0 is input
-+ ra_outl(RALINK_PIO_BASE+0x24, ra_inl(RALINK_PIO_BASE+0x24) & ~0x01);
-+
-+ ra = (struct ra_nand_chip *)kzalloc(alloc_size, GFP_KERNEL | GFP_DMA);
-+ if (!ra) {
-+ printk("%s: mem alloc fail \n", __func__);
-+ return -ENOMEM;
-+ }
-+ memset(ra, 0, alloc_size);
-+
-+ //dynamic
-+ ra->buffers = (char *)((char *)ra + sizeof(*ra));
-+ ra->readback_buffers = ra->buffers + buffers_size;
-+ ra->bbt = ra->readback_buffers + buffers_size;
-+ ranfc_mtd = (struct mtd_info *)(ra->bbt + bbt_size);
-+
-+ //static
-+ ra->numchips = CONFIG_NUMCHIPS;
-+ ra->chip_shift = CONFIG_CHIP_SIZE_BIT;
-+ ra->page_shift = CONFIG_PAGE_SIZE_BIT;
-+ ra->oob_shift = CONFIG_OOBSIZE_PER_PAGE_BIT;
-+ ra->erase_shift = (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT);
-+ ra->badblockpos = CONFIG_BAD_BLOCK_POS;
-+ ra_oob_layout.eccpos[0] = CONFIG_ECC_OFFSET;
-+ ra_oob_layout.eccpos[1] = CONFIG_ECC_OFFSET + 1;
-+ ra_oob_layout.eccpos[2] = CONFIG_ECC_OFFSET + 2;
-+ ra->oob = &ra_oob_layout;
-+ ra->buffers_page = -1;
-+
-+#if defined (WORKAROUND_RX_BUF_OV)
-+ if (ranfc_verify) {
-+ ra->sandbox_page = nand_bbt_find_sandbox(ra);
-+ }
-+#endif
-+ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x01); //set wp to high
-+ nfc_all_reset();
-+
-+ ranfc_mtd->type = MTD_NANDFLASH;
-+ ranfc_mtd->flags = MTD_CAP_NANDFLASH;
-+ ranfc_mtd->size = CONFIG_NUMCHIPS * CFG_CHIPSIZE;
-+ ranfc_mtd->erasesize = CFG_BLOCKSIZE;
-+ ranfc_mtd->writesize = CFG_PAGESIZE;
-+ ranfc_mtd->oobsize = CFG_PAGE_OOBSIZE;
-+ ranfc_mtd->oobavail = RA_CHIP_OOB_AVAIL;
-+ ranfc_mtd->name = "ra_nfc";
-+ //ranfc_mtd->index
-+ ranfc_mtd->ecclayout = &ra_oob_layout;
-+ //ranfc_mtd->numberaseregions
-+ //ranfc_mtd->eraseregions
-+ //ranfc_mtd->bansize
-+ ranfc_mtd->_erase = ramtd_nand_erase;
-+ //ranfc_mtd->point
-+ //ranfc_mtd->unpoint
-+ ranfc_mtd->_read = ramtd_nand_read;
-+ ranfc_mtd->_write = ramtd_nand_write;
-+ ranfc_mtd->_read_oob = ramtd_nand_readoob;
-+ ranfc_mtd->_write_oob = ramtd_nand_writeoob;
-+ //ranfc_mtd->get_fact_prot_info; ranfc_mtd->read_fact_prot_reg;
-+ //ranfc_mtd->get_user_prot_info; ranfc_mtd->read_user_prot_reg;
-+ //ranfc_mtd->write_user_prot_reg; ranfc_mtd->lock_user_prot_reg;
-+ //ranfc_mtd->writev; ranfc_mtd->sync; ranfc_mtd->lock; ranfc_mtd->unlock; ranfc_mtd->suspend; ranfc_mtd->resume;
-+ ranfc_mtd->_block_isbad = ramtd_nand_block_isbad;
-+ ranfc_mtd->_block_markbad = ramtd_nand_block_markbad;
-+ //ranfc_mtd->reboot_notifier
-+ //ranfc_mtd->ecc_stats;
-+ // subpage_sht;
-+
-+ //ranfc_mtd->get_device; ranfc_mtd->put_device
-+ ranfc_mtd->priv = ra;
-+
-+ ranfc_mtd->owner = THIS_MODULE;
-+ ra->controller = &ra->hwcontrol;
-+ mutex_init(ra->controller);
-+
-+ printk("%s: alloc %x, at %p , btt(%p, %x), ranfc_mtd:%p\n",
-+ __func__ , alloc_size, ra, ra->bbt, bbt_size, ranfc_mtd);
-+
-+ ppdata.of_node = pdev->dev.of_node;
-+ err = mtd_device_parse_register(ranfc_mtd, mtk_probe_types,
-+ &ppdata, NULL, 0);
-+
-+ return err;
-+}
-+
-+static int
-+mtk_nand_remove(struct platform_device *pdev)
-+{
-+ struct ra_nand_chip *ra;
-+
-+ if (ranfc_mtd) {
-+ ra = (struct ra_nand_chip *)ranfc_mtd->priv;
-+
-+ /* Deregister partitions */
-+ //del_mtd_partitions(ranfc_mtd);
-+ kfree(ra);
-+ }
-+ return 0;
-+}
-+
-+static const struct of_device_id mtk_nand_match[] = {
-+ { .compatible = "mtk,mt7620-nand" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mtk_nand_match);
-+
-+static struct platform_driver mtk_nand_driver = {
-+ .probe = mtk_nand_probe,
-+ .remove = mtk_nand_remove,
-+ .driver = {
-+ .name = "mt7620_nand",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mtk_nand_match,
-+ },
-+};
-+
-+module_platform_driver(mtk_nand_driver);
-+
-+
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/maps/ralink_nand.h
-@@ -0,0 +1,232 @@
-+#ifndef RT2880_NAND_H
-+#define RT2880_NAND_H
-+
-+#include <linux/mtd/mtd.h>
-+
-+//#include "gdma.h"
-+
-+#define RALINK_SYSCTL_BASE 0xB0000000
-+#define RALINK_PIO_BASE 0xB0000600
-+#define RALINK_NAND_CTRL_BASE 0xB0000810
-+#define CONFIG_RALINK_MT7620
-+
-+#define SKIP_BAD_BLOCK
-+//#define RANDOM_GEN_BAD_BLOCK
-+
-+#define ra_inl(addr) (*(volatile unsigned int *)(addr))
-+#define ra_outl(addr, value) (*(volatile unsigned int *)(addr) = (value))
-+#define ra_aor(addr, a_mask, o_value) ra_outl(addr, (ra_inl(addr) & (a_mask)) | (o_value))
-+#define ra_and(addr, a_mask) ra_aor(addr, a_mask, 0)
-+#define ra_or(addr, o_value) ra_aor(addr, -1, o_value)
-+
-+
-+#define CONFIG_NUMCHIPS 1
-+#define CONFIG_NOT_SUPPORT_WP //rt3052 has no WP signal for chip.
-+//#define CONFIG_NOT_SUPPORT_RB
-+
-+extern int is_nand_page_2048;
-+extern const unsigned int nand_size_map[2][3];
-+
-+//chip
-+// chip geometry: SAMSUNG small size 32MB.
-+#define CONFIG_CHIP_SIZE_BIT (nand_size_map[is_nand_page_2048][nand_addrlen-3]) //! (1<<NAND_SIZE_BYTE) MB
-+//#define CONFIG_CHIP_SIZE_BIT (is_nand_page_2048? 29 : 25) //! (1<<NAND_SIZE_BYTE) MB
-+#define CONFIG_PAGE_SIZE_BIT (is_nand_page_2048? 11 : 9) //! (1<<PAGE_SIZE) MB
-+//#define CONFIG_SUBPAGE_BIT 1 //! these bits will be compensate by command cycle
-+#define CONFIG_NUMPAGE_PER_BLOCK_BIT (is_nand_page_2048? 6 : 5) //! order of number of pages a block.
-+#define CONFIG_OOBSIZE_PER_PAGE_BIT (is_nand_page_2048? 6 : 4) //! byte number of oob a page.
-+#define CONFIG_BAD_BLOCK_POS (is_nand_page_2048? 0 : 4) //! offset of byte to denote bad block.
-+#define CONFIG_ECC_BYTES 3 //! ecc has 3 bytes
-+#define CONFIG_ECC_OFFSET (is_nand_page_2048? 6 : 5) //! ecc starts from offset 5.
-+
-+//this section should not be modified.
-+//#define CFG_COLUMN_ADDR_MASK ((1 << (CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT)) - 1)
-+//#define CFG_COLUMN_ADDR_CYCLE (((CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT) + 7)/8)
-+//#define CFG_ROW_ADDR_CYCLE ((CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT + 7)/8)
-+//#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE)
-+
-+#define CFG_COLUMN_ADDR_CYCLE (is_nand_page_2048? 2 : 1)
-+#define CFG_ROW_ADDR_CYCLE (nand_addrlen - CFG_COLUMN_ADDR_CYCLE)
-+#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE)
-+
-+#define CFG_CHIPSIZE (1 << ((CONFIG_CHIP_SIZE_BIT>=32)? 31 : CONFIG_CHIP_SIZE_BIT))
-+//#define CFG_CHIPSIZE (1 << CONFIG_CHIP_SIZE_BIT)
-+#define CFG_PAGESIZE (1 << CONFIG_PAGE_SIZE_BIT)
-+#define CFG_BLOCKSIZE (CFG_PAGESIZE << CONFIG_NUMPAGE_PER_BLOCK_BIT)
-+#define CFG_NUMPAGE (1 << (CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT))
-+#define CFG_NUMBLOCK (CFG_NUMPAGE >> CONFIG_NUMPAGE_PER_BLOCK_BIT)
-+#define CFG_BLOCK_OOBSIZE (1 << (CONFIG_OOBSIZE_PER_PAGE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))
-+#define CFG_PAGE_OOBSIZE (1 << CONFIG_OOBSIZE_PER_PAGE_BIT)
-+
-+#define NAND_BLOCK_ALIGN(addr) ((addr) & (CFG_BLOCKSIZE-1))
-+#define NAND_PAGE_ALIGN(addr) ((addr) & (CFG_PAGESIZE-1))
-+
-+
-+#define NFC_BASE RALINK_NAND_CTRL_BASE
-+#define NFC_CTRL (NFC_BASE + 0x0)
-+#define NFC_CONF (NFC_BASE + 0x4)
-+#define NFC_CMD1 (NFC_BASE + 0x8)
-+#define NFC_CMD2 (NFC_BASE + 0xc)
-+#define NFC_CMD3 (NFC_BASE + 0x10)
-+#define NFC_ADDR (NFC_BASE + 0x14)
-+#define NFC_DATA (NFC_BASE + 0x18)
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+#define NFC_ECC (NFC_BASE + 0x30)
-+#else
-+#define NFC_ECC (NFC_BASE + 0x1c)
-+#endif
-+#define NFC_STATUS (NFC_BASE + 0x20)
-+#define NFC_INT_EN (NFC_BASE + 0x24)
-+#define NFC_INT_ST (NFC_BASE + 0x28)
-+#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \
-+ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+#define NFC_CONF1 (NFC_BASE + 0x2c)
-+#define NFC_ECC_P1 (NFC_BASE + 0x30)
-+#define NFC_ECC_P2 (NFC_BASE + 0x34)
-+#define NFC_ECC_P3 (NFC_BASE + 0x38)
-+#define NFC_ECC_P4 (NFC_BASE + 0x3c)
-+#define NFC_ECC_ERR1 (NFC_BASE + 0x40)
-+#define NFC_ECC_ERR2 (NFC_BASE + 0x44)
-+#define NFC_ECC_ERR3 (NFC_BASE + 0x48)
-+#define NFC_ECC_ERR4 (NFC_BASE + 0x4c)
-+#define NFC_ADDR2 (NFC_BASE + 0x50)
-+#endif
-+
-+enum _int_stat {
-+ INT_ST_ND_DONE = 1<<0,
-+ INT_ST_TX_BUF_RDY = 1<<1,
-+ INT_ST_RX_BUF_RDY = 1<<2,
-+ INT_ST_ECC_ERR = 1<<3,
-+ INT_ST_TX_TRAS_ERR = 1<<4,
-+ INT_ST_RX_TRAS_ERR = 1<<5,
-+ INT_ST_TX_KICK_ERR = 1<<6,
-+ INT_ST_RX_KICK_ERR = 1<<7
-+};
-+
-+
-+//#define WORKAROUND_RX_BUF_OV 1
-+
-+
-+/*************************************************************
-+ * stolen from nand.h
-+ *************************************************************/
-+
-+/*
-+ * Standard NAND flash commands
-+ */
-+#define NAND_CMD_READ0 0
-+#define NAND_CMD_READ1 1
-+#define NAND_CMD_RNDOUT 5
-+#define NAND_CMD_PAGEPROG 0x10
-+#define NAND_CMD_READOOB 0x50
-+#define NAND_CMD_ERASE1 0x60
-+#define NAND_CMD_STATUS 0x70
-+#define NAND_CMD_STATUS_MULTI 0x71
-+#define NAND_CMD_SEQIN 0x80
-+#define NAND_CMD_RNDIN 0x85
-+#define NAND_CMD_READID 0x90
-+#define NAND_CMD_ERASE2 0xd0
-+#define NAND_CMD_RESET 0xff
-+
-+/* Extended commands for large page devices */
-+#define NAND_CMD_READSTART 0x30
-+#define NAND_CMD_RNDOUTSTART 0xE0
-+#define NAND_CMD_CACHEDPROG 0x15
-+
-+/* Extended commands for AG-AND device */
-+/*
-+ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but
-+ * there is no way to distinguish that from NAND_CMD_READ0
-+ * until the remaining sequence of commands has been completed
-+ * so add a high order bit and mask it off in the command.
-+ */
-+#define NAND_CMD_DEPLETE1 0x100
-+#define NAND_CMD_DEPLETE2 0x38
-+#define NAND_CMD_STATUS_MULTI 0x71
-+#define NAND_CMD_STATUS_ERROR 0x72
-+/* multi-bank error status (banks 0-3) */
-+#define NAND_CMD_STATUS_ERROR0 0x73
-+#define NAND_CMD_STATUS_ERROR1 0x74
-+#define NAND_CMD_STATUS_ERROR2 0x75
-+#define NAND_CMD_STATUS_ERROR3 0x76
-+#define NAND_CMD_STATUS_RESET 0x7f
-+#define NAND_CMD_STATUS_CLEAR 0xff
-+
-+#define NAND_CMD_NONE -1
-+
-+/* Status bits */
-+#define NAND_STATUS_FAIL 0x01
-+#define NAND_STATUS_FAIL_N1 0x02
-+#define NAND_STATUS_TRUE_READY 0x20
-+#define NAND_STATUS_READY 0x40
-+#define NAND_STATUS_WP 0x80
-+
-+typedef enum {
-+ FL_READY,
-+ FL_READING,
-+ FL_WRITING,
-+ FL_ERASING,
-+ FL_SYNCING,
-+ FL_CACHEDPRG,
-+ FL_PM_SUSPENDED,
-+} nand_state_t;
-+
-+/*************************************************************/
-+
-+
-+
-+typedef enum _ra_flags {
-+ FLAG_NONE = 0,
-+ FLAG_ECC_EN = (1<<0),
-+ FLAG_USE_GDMA = (1<<1),
-+ FLAG_VERIFY = (1<<2),
-+} RA_FLAGS;
-+
-+
-+#define BBTTAG_BITS 2
-+#define BBTTAG_BITS_MASK ((1<<BBTTAG_BITS) -1)
-+enum BBT_TAG {
-+ BBT_TAG_UNKNOWN = 0, //2'b01
-+ BBT_TAG_GOOD = 3, //2'b11
-+ BBT_TAG_BAD = 2, //2'b10
-+ BBT_TAG_RES = 1, //2'b01
-+};
-+
-+struct ra_nand_chip {
-+ int numchips;
-+ int chip_shift;
-+ int page_shift;
-+ int erase_shift;
-+ int oob_shift;
-+ int badblockpos;
-+#if !defined (__UBOOT__)
-+ struct mutex hwcontrol;
-+ struct mutex *controller;
-+#endif
-+ struct nand_ecclayout *oob;
-+ int state;
-+ unsigned int buffers_page;
-+ char *buffers; //[CFG_PAGESIZE + CFG_PAGE_OOBSIZE];
-+ char *readback_buffers;
-+ unsigned char *bbt;
-+#if defined (WORKAROUND_RX_BUF_OV)
-+ unsigned int sandbox_page; // steal a page (block) for read ECC verification
-+#endif
-+
-+};
-+
-+
-+
-+//fixme, gdma api
-+int nand_dma_sync(void);
-+void release_dma_buf(void);
-+int set_gdma_ch(unsigned long dst,
-+ unsigned long src, unsigned int len, int burst_size,
-+ int soft_mode, int src_req_type, int dst_req_type,
-+ int src_burst_mode, int dst_burst_mode);
-+
-+
-+
-+
-+#endif
diff --git a/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch b/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch
deleted file mode 100644
index a16be7356d..0000000000
--- a/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch
+++ /dev/null
@@ -1,4417 +0,0 @@
-From 0e1c4e3c97b83b4e7da65b1c56f0a7d40736ac53 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 11:05:17 +0100
-Subject: [PATCH 39/53] mtd: add mt7621 nand support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/Kconfig | 6 +
- drivers/mtd/nand/Makefile | 1 +
- drivers/mtd/nand/bmt.c | 750 ++++++++++++
- drivers/mtd/nand/bmt.h | 80 ++
- drivers/mtd/nand/dev-nand.c | 63 +
- drivers/mtd/nand/mt6575_typedefs.h | 340 ++++++
- drivers/mtd/nand/mtk_nand.c | 2304 +++++++++++++++++++++++++++++++++++
- drivers/mtd/nand/mtk_nand.h | 452 +++++++
- drivers/mtd/nand/nand_base.c | 6 +-
- drivers/mtd/nand/nand_bbt.c | 19 +
- drivers/mtd/nand/nand_def.h | 123 ++
- drivers/mtd/nand/nand_device_list.h | 55 +
- drivers/mtd/nand/partition.h | 115 ++
- 13 files changed, 4311 insertions(+), 3 deletions(-)
- create mode 100644 drivers/mtd/nand/bmt.c
- create mode 100644 drivers/mtd/nand/bmt.h
- create mode 100644 drivers/mtd/nand/dev-nand.c
- create mode 100644 drivers/mtd/nand/mt6575_typedefs.h
- create mode 100644 drivers/mtd/nand/mtk_nand.c
- create mode 100644 drivers/mtd/nand/mtk_nand.h
- create mode 100644 drivers/mtd/nand/nand_def.h
- create mode 100644 drivers/mtd/nand/nand_device_list.h
- create mode 100644 drivers/mtd/nand/partition.h
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -535,4 +535,10 @@ config MTD_NAND_HISI504
- help
- Enables support for NAND controller on Hisilicon SoC Hip04.
-
-+config MTK_MTD_NAND
-+ tristate "Support for MTK SoC NAND controller"
-+ depends on SOC_MT7621
-+ select MTD_NAND_IDS
-+ select MTD_NAND_ECC
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -54,5 +54,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) +=
- obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
- obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
- obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
-+obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand.o bmt.o
-
- nand-objs := nand_base.o nand_bbt.o nand_timings.o
---- /dev/null
-+++ b/drivers/mtd/nand/bmt.c
-@@ -0,0 +1,750 @@
-+#include "bmt.h"
-+
-+typedef struct
-+{
-+ char signature[3];
-+ u8 version;
-+ u8 bad_count; // bad block count in pool
-+ u8 mapped_count; // mapped block count in pool
-+ u8 checksum;
-+ u8 reseverd[13];
-+} phys_bmt_header;
-+
-+typedef struct
-+{
-+ phys_bmt_header header;
-+ bmt_entry table[MAX_BMT_SIZE];
-+} phys_bmt_struct;
-+
-+typedef struct
-+{
-+ char signature[3];
-+} bmt_oob_data;
-+
-+static char MAIN_SIGNATURE[] = "BMT";
-+static char OOB_SIGNATURE[] = "bmt";
-+#define SIGNATURE_SIZE (3)
-+
-+#define MAX_DAT_SIZE 0x1000
-+#define MAX_OOB_SIZE 0x80
-+
-+static struct mtd_info *mtd_bmt;
-+static struct nand_chip *nand_chip_bmt;
-+#define BLOCK_SIZE_BMT (1 << nand_chip_bmt->phys_erase_shift)
-+#define PAGE_SIZE_BMT (1 << nand_chip_bmt->page_shift)
-+
-+#define OFFSET(block) ((block) * BLOCK_SIZE_BMT)
-+#define PAGE_ADDR(block) ((block) * BLOCK_SIZE_BMT / PAGE_SIZE_BMT)
-+
-+/*********************************************************************
-+* Flash is splited into 2 parts, system part is for normal system *
-+* system usage, size is system_block_count, another is replace pool *
-+* +-------------------------------------------------+ *
-+* | system_block_count | bmt_block_count | *
-+* +-------------------------------------------------+ *
-+*********************************************************************/
-+static u32 total_block_count; // block number in flash
-+static u32 system_block_count;
-+static int bmt_block_count; // bmt table size
-+// static int bmt_count; // block used in bmt
-+static int page_per_block; // page per count
-+
-+static u32 bmt_block_index; // bmt block index
-+static bmt_struct bmt; // dynamic created global bmt table
-+
-+static u8 dat_buf[MAX_DAT_SIZE];
-+static u8 oob_buf[MAX_OOB_SIZE];
-+static bool pool_erased;
-+
-+/***************************************************************
-+*
-+* Interface adaptor for preloader/uboot/kernel
-+* These interfaces operate on physical address, read/write
-+* physical data.
-+*
-+***************************************************************/
-+int nand_read_page_bmt(u32 page, u8 * dat, u8 * oob)
-+{
-+ return mtk_nand_exec_read_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob);
-+}
-+
-+bool nand_block_bad_bmt(u32 offset)
-+{
-+ return mtk_nand_block_bad_hw(mtd_bmt, offset);
-+}
-+
-+bool nand_erase_bmt(u32 offset)
-+{
-+ int status;
-+ if (offset < 0x20000)
-+ {
-+ MSG(INIT, "erase offset: 0x%x\n", offset);
-+ }
-+
-+ status = mtk_nand_erase_hw(mtd_bmt, offset / PAGE_SIZE_BMT); // as nand_chip structure doesn't have a erase function defined
-+ if (status & NAND_STATUS_FAIL)
-+ return false;
-+ else
-+ return true;
-+}
-+
-+int mark_block_bad_bmt(u32 offset)
-+{
-+ return mtk_nand_block_markbad_hw(mtd_bmt, offset); //mark_block_bad_hw(offset);
-+}
-+
-+bool nand_write_page_bmt(u32 page, u8 * dat, u8 * oob)
-+{
-+ if (mtk_nand_exec_write_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob))
-+ return false;
-+ else
-+ return true;
-+}
-+
-+/***************************************************************
-+* *
-+* static internal function *
-+* *
-+***************************************************************/
-+static void dump_bmt_info(bmt_struct * bmt)
-+{
-+ int i;
-+
-+ MSG(INIT, "BMT v%d. total %d mapping:\n", bmt->version, bmt->mapped_count);
-+ for (i = 0; i < bmt->mapped_count; i++)
-+ {
-+ MSG(INIT, "\t0x%x -> 0x%x\n", bmt->table[i].bad_index, bmt->table[i].mapped_index);
-+ }
-+}
-+
-+static bool match_bmt_signature(u8 * dat, u8 * oob)
-+{
-+
-+ if (memcmp(dat + MAIN_SIGNATURE_OFFSET, MAIN_SIGNATURE, SIGNATURE_SIZE))
-+ {
-+ return false;
-+ }
-+
-+ if (memcmp(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE))
-+ {
-+ MSG(INIT, "main signature match, oob signature doesn't match, but ignore\n");
-+ }
-+ return true;
-+}
-+
-+static u8 cal_bmt_checksum(phys_bmt_struct * phys_table, int bmt_size)
-+{
-+ int i;
-+ u8 checksum = 0;
-+ u8 *dat = (u8 *) phys_table;
-+
-+ checksum += phys_table->header.version;
-+ checksum += phys_table->header.mapped_count;
-+
-+ dat += sizeof(phys_bmt_header);
-+ for (i = 0; i < bmt_size * sizeof(bmt_entry); i++)
-+ {
-+ checksum += dat[i];
-+ }
-+
-+ return checksum;
-+}
-+
-+
-+static int is_block_mapped(int index)
-+{
-+ int i;
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (index == bmt.table[i].mapped_index)
-+ return i;
-+ }
-+ return -1;
-+}
-+
-+static bool is_page_used(u8 * dat, u8 * oob)
-+{
-+ return ((oob[OOB_INDEX_OFFSET] != 0xFF) || (oob[OOB_INDEX_OFFSET + 1] != 0xFF));
-+}
-+
-+static bool valid_bmt_data(phys_bmt_struct * phys_table)
-+{
-+ int i;
-+ u8 checksum = cal_bmt_checksum(phys_table, bmt_block_count);
-+
-+ // checksum correct?
-+ if (phys_table->header.checksum != checksum)
-+ {
-+ MSG(INIT, "BMT Data checksum error: %x %x\n", phys_table->header.checksum, checksum);
-+ return false;
-+ }
-+
-+ MSG(INIT, "BMT Checksum is: 0x%x\n", phys_table->header.checksum);
-+
-+ // block index correct?
-+ for (i = 0; i < phys_table->header.mapped_count; i++)
-+ {
-+ if (phys_table->table[i].bad_index >= total_block_count || phys_table->table[i].mapped_index >= total_block_count || phys_table->table[i].mapped_index < system_block_count)
-+ {
-+ MSG(INIT, "index error: bad_index: %d, mapped_index: %d\n", phys_table->table[i].bad_index, phys_table->table[i].mapped_index);
-+ return false;
-+ }
-+ }
-+
-+ // pass check, valid bmt.
-+ MSG(INIT, "Valid BMT, version v%d\n", phys_table->header.version);
-+ return true;
-+}
-+
-+static void fill_nand_bmt_buffer(bmt_struct * bmt, u8 * dat, u8 * oob)
-+{
-+ phys_bmt_struct phys_bmt;
-+
-+ dump_bmt_info(bmt);
-+
-+ // fill phys_bmt_struct structure with bmt_struct
-+ memset(&phys_bmt, 0xFF, sizeof(phys_bmt));
-+
-+ memcpy(phys_bmt.header.signature, MAIN_SIGNATURE, SIGNATURE_SIZE);
-+ phys_bmt.header.version = BMT_VERSION;
-+ // phys_bmt.header.bad_count = bmt->bad_count;
-+ phys_bmt.header.mapped_count = bmt->mapped_count;
-+ memcpy(phys_bmt.table, bmt->table, sizeof(bmt_entry) * bmt_block_count);
-+
-+ phys_bmt.header.checksum = cal_bmt_checksum(&phys_bmt, bmt_block_count);
-+
-+ memcpy(dat + MAIN_SIGNATURE_OFFSET, &phys_bmt, sizeof(phys_bmt));
-+ memcpy(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE);
-+}
-+
-+// return valid index if found BMT, else return 0
-+static int load_bmt_data(int start, int pool_size)
-+{
-+ int bmt_index = start + pool_size - 1; // find from the end
-+ phys_bmt_struct phys_table;
-+ int i;
-+
-+ MSG(INIT, "[%s]: begin to search BMT from block 0x%x\n", __FUNCTION__, bmt_index);
-+
-+ for (bmt_index = start + pool_size - 1; bmt_index >= start; bmt_index--)
-+ {
-+ if (nand_block_bad_bmt(OFFSET(bmt_index)))
-+ {
-+ MSG(INIT, "Skip bad block: %d\n", bmt_index);
-+ continue;
-+ }
-+
-+ if (!nand_read_page_bmt(PAGE_ADDR(bmt_index), dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "Error found when read block %d\n", bmt_index);
-+ continue;
-+ }
-+
-+ if (!match_bmt_signature(dat_buf, oob_buf))
-+ {
-+ continue;
-+ }
-+
-+ MSG(INIT, "Match bmt signature @ block: 0x%x\n", bmt_index);
-+
-+ memcpy(&phys_table, dat_buf + MAIN_SIGNATURE_OFFSET, sizeof(phys_table));
-+
-+ if (!valid_bmt_data(&phys_table))
-+ {
-+ MSG(INIT, "BMT data is not correct %d\n", bmt_index);
-+ continue;
-+ } else
-+ {
-+ bmt.mapped_count = phys_table.header.mapped_count;
-+ bmt.version = phys_table.header.version;
-+ // bmt.bad_count = phys_table.header.bad_count;
-+ memcpy(bmt.table, phys_table.table, bmt.mapped_count * sizeof(bmt_entry));
-+
-+ MSG(INIT, "bmt found at block: %d, mapped block: %d\n", bmt_index, bmt.mapped_count);
-+
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (!nand_block_bad_bmt(OFFSET(bmt.table[i].bad_index)))
-+ {
-+ MSG(INIT, "block 0x%x is not mark bad, should be power lost last time\n", bmt.table[i].bad_index);
-+ mark_block_bad_bmt(OFFSET(bmt.table[i].bad_index));
-+ }
-+ }
-+
-+ return bmt_index;
-+ }
-+ }
-+
-+ MSG(INIT, "bmt block not found!\n");
-+ return 0;
-+}
-+
-+/*************************************************************************
-+* Find an available block and erase. *
-+* start_from_end: if true, find available block from end of flash. *
-+* else, find from the beginning of the pool *
-+* need_erase: if true, all unmapped blocks in the pool will be erased *
-+*************************************************************************/
-+static int find_available_block(bool start_from_end)
-+{
-+ int i; // , j;
-+ int block = system_block_count;
-+ int direction;
-+ // int avail_index = 0;
-+ MSG(INIT, "Try to find_available_block, pool_erase: %d\n", pool_erased);
-+
-+ // erase all un-mapped blocks in pool when finding avaliable block
-+ if (!pool_erased)
-+ {
-+ MSG(INIT, "Erase all un-mapped blocks in pool\n");
-+ for (i = 0; i < bmt_block_count; i++)
-+ {
-+ if (block == bmt_block_index)
-+ {
-+ MSG(INIT, "Skip bmt block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (nand_block_bad_bmt(OFFSET(block + i)))
-+ {
-+ MSG(INIT, "Skip bad block 0x%x\n", block + i);
-+ continue;
-+ }
-+//if(block==4095)
-+//{
-+// continue;
-+//}
-+
-+ if (is_block_mapped(block + i) >= 0)
-+ {
-+ MSG(INIT, "Skip mapped block 0x%x\n", block + i);
-+ continue;
-+ }
-+
-+ if (!nand_erase_bmt(OFFSET(block + i)))
-+ {
-+ MSG(INIT, "Erase block 0x%x failed\n", block + i);
-+ mark_block_bad_bmt(OFFSET(block + i));
-+ }
-+ }
-+
-+ pool_erased = 1;
-+ }
-+
-+ if (start_from_end)
-+ {
-+ block = total_block_count - 1;
-+ direction = -1;
-+ } else
-+ {
-+ block = system_block_count;
-+ direction = 1;
-+ }
-+
-+ for (i = 0; i < bmt_block_count; i++, block += direction)
-+ {
-+ if (block == bmt_block_index)
-+ {
-+ MSG(INIT, "Skip bmt block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (nand_block_bad_bmt(OFFSET(block)))
-+ {
-+ MSG(INIT, "Skip bad block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ if (is_block_mapped(block) >= 0)
-+ {
-+ MSG(INIT, "Skip mapped block 0x%x\n", block);
-+ continue;
-+ }
-+
-+ MSG(INIT, "Find block 0x%x available\n", block);
-+ return block;
-+ }
-+
-+ return 0;
-+}
-+
-+static unsigned short get_bad_index_from_oob(u8 * oob_buf)
-+{
-+ unsigned short index;
-+ memcpy(&index, oob_buf + OOB_INDEX_OFFSET, OOB_INDEX_SIZE);
-+
-+ return index;
-+}
-+
-+void set_bad_index_to_oob(u8 * oob, u16 index)
-+{
-+ memcpy(oob + OOB_INDEX_OFFSET, &index, sizeof(index));
-+}
-+
-+static int migrate_from_bad(int offset, u8 * write_dat, u8 * write_oob)
-+{
-+ int page;
-+ int error_block = offset / BLOCK_SIZE_BMT;
-+ int error_page = (offset / PAGE_SIZE_BMT) % page_per_block;
-+ int to_index;
-+
-+ memcpy(oob_buf, write_oob, MAX_OOB_SIZE);
-+
-+ to_index = find_available_block(false);
-+
-+ if (!to_index)
-+ {
-+ MSG(INIT, "Cannot find an available block for BMT\n");
-+ return 0;
-+ }
-+
-+ { // migrate error page first
-+ MSG(INIT, "Write error page: 0x%x\n", error_page);
-+ if (!write_dat)
-+ {
-+ nand_read_page_bmt(PAGE_ADDR(error_block) + error_page, dat_buf, NULL);
-+ write_dat = dat_buf;
-+ }
-+ // memcpy(oob_buf, write_oob, MAX_OOB_SIZE);
-+
-+ if (error_block < system_block_count)
-+ set_bad_index_to_oob(oob_buf, error_block); // if error_block is already a mapped block, original mapping index is in OOB.
-+
-+ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + error_page, write_dat, oob_buf))
-+ {
-+ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + error_page);
-+ mark_block_bad_bmt(to_index);
-+ return migrate_from_bad(offset, write_dat, write_oob);
-+ }
-+ }
-+
-+ for (page = 0; page < page_per_block; page++)
-+ {
-+ if (page != error_page)
-+ {
-+ nand_read_page_bmt(PAGE_ADDR(error_block) + page, dat_buf, oob_buf);
-+ if (is_page_used(dat_buf, oob_buf))
-+ {
-+ if (error_block < system_block_count)
-+ {
-+ set_bad_index_to_oob(oob_buf, error_block);
-+ }
-+ MSG(INIT, "\tmigrate page 0x%x to page 0x%x\n", PAGE_ADDR(error_block) + page, PAGE_ADDR(to_index) + page);
-+ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + page, dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + page);
-+ mark_block_bad_bmt(to_index);
-+ return migrate_from_bad(offset, write_dat, write_oob);
-+ }
-+ }
-+ }
-+ }
-+
-+ MSG(INIT, "Migrate from 0x%x to 0x%x done!\n", error_block, to_index);
-+
-+ return to_index;
-+}
-+
-+static bool write_bmt_to_flash(u8 * dat, u8 * oob)
-+{
-+ bool need_erase = true;
-+ MSG(INIT, "Try to write BMT\n");
-+
-+ if (bmt_block_index == 0)
-+ {
-+ // if we don't have index, we don't need to erase found block as it has been erased in find_available_block()
-+ need_erase = false;
-+ if (!(bmt_block_index = find_available_block(true)))
-+ {
-+ MSG(INIT, "Cannot find an available block for BMT\n");
-+ return false;
-+ }
-+ }
-+
-+ MSG(INIT, "Find BMT block: 0x%x\n", bmt_block_index);
-+
-+ // write bmt to flash
-+ if (need_erase)
-+ {
-+ if (!nand_erase_bmt(OFFSET(bmt_block_index)))
-+ {
-+ MSG(INIT, "BMT block erase fail, mark bad: 0x%x\n", bmt_block_index);
-+ mark_block_bad_bmt(OFFSET(bmt_block_index));
-+ // bmt.bad_count++;
-+
-+ bmt_block_index = 0;
-+ return write_bmt_to_flash(dat, oob); // recursive call
-+ }
-+ }
-+
-+ if (!nand_write_page_bmt(PAGE_ADDR(bmt_block_index), dat, oob))
-+ {
-+ MSG(INIT, "Write BMT data fail, need to write again\n");
-+ mark_block_bad_bmt(OFFSET(bmt_block_index));
-+ // bmt.bad_count++;
-+
-+ bmt_block_index = 0;
-+ return write_bmt_to_flash(dat, oob); // recursive call
-+ }
-+
-+ MSG(INIT, "Write BMT data to block 0x%x success\n", bmt_block_index);
-+ return true;
-+}
-+
-+/*******************************************************************
-+* Reconstruct bmt, called when found bmt info doesn't match bad
-+* block info in flash.
-+*
-+* Return NULL for failure
-+*******************************************************************/
-+bmt_struct *reconstruct_bmt(bmt_struct * bmt)
-+{
-+ int i;
-+ int index = system_block_count;
-+ unsigned short bad_index;
-+ int mapped;
-+
-+ // init everything in BMT struct
-+ bmt->version = BMT_VERSION;
-+ bmt->bad_count = 0;
-+ bmt->mapped_count = 0;
-+
-+ memset(bmt->table, 0, bmt_block_count * sizeof(bmt_entry));
-+
-+ for (i = 0; i < bmt_block_count; i++, index++)
-+ {
-+ if (nand_block_bad_bmt(OFFSET(index)))
-+ {
-+ MSG(INIT, "Skip bad block: 0x%x\n", index);
-+ // bmt->bad_count++;
-+ continue;
-+ }
-+
-+ MSG(INIT, "read page: 0x%x\n", PAGE_ADDR(index));
-+ nand_read_page_bmt(PAGE_ADDR(index), dat_buf, oob_buf);
-+ /* if (mtk_nand_read_page_hw(PAGE_ADDR(index), dat_buf))
-+ {
-+ MSG(INIT, "Error when read block %d\n", bmt_block_index);
-+ continue;
-+ } */
-+
-+ if ((bad_index = get_bad_index_from_oob(oob_buf)) >= system_block_count)
-+ {
-+ MSG(INIT, "get bad index: 0x%x\n", bad_index);
-+ if (bad_index != 0xFFFF)
-+ MSG(INIT, "Invalid bad index found in block 0x%x, bad index 0x%x\n", index, bad_index);
-+ continue;
-+ }
-+
-+ MSG(INIT, "Block 0x%x is mapped to bad block: 0x%x\n", index, bad_index);
-+
-+ if (!nand_block_bad_bmt(OFFSET(bad_index)))
-+ {
-+ MSG(INIT, "\tbut block 0x%x is not marked as bad, invalid mapping\n", bad_index);
-+ continue; // no need to erase here, it will be erased later when trying to write BMT
-+ }
-+
-+ if ((mapped = is_block_mapped(bad_index)) >= 0)
-+ {
-+ MSG(INIT, "bad block 0x%x is mapped to 0x%x, should be caused by power lost, replace with one\n", bmt->table[mapped].bad_index, bmt->table[mapped].mapped_index);
-+ bmt->table[mapped].mapped_index = index; // use new one instead.
-+ } else
-+ {
-+ // add mapping to BMT
-+ bmt->table[bmt->mapped_count].bad_index = bad_index;
-+ bmt->table[bmt->mapped_count].mapped_index = index;
-+ bmt->mapped_count++;
-+ }
-+
-+ MSG(INIT, "Add mapping: 0x%x -> 0x%x to BMT\n", bad_index, index);
-+
-+ }
-+
-+ MSG(INIT, "Scan replace pool done, mapped block: %d\n", bmt->mapped_count);
-+ // dump_bmt_info(bmt);
-+
-+ // fill NAND BMT buffer
-+ memset(oob_buf, 0xFF, sizeof(oob_buf));
-+ fill_nand_bmt_buffer(bmt, dat_buf, oob_buf);
-+
-+ // write BMT back
-+ if (!write_bmt_to_flash(dat_buf, oob_buf))
-+ {
-+ MSG(INIT, "TRAGEDY: cannot find a place to write BMT!!!!\n");
-+ }
-+
-+ return bmt;
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Init bmt from nand. Reconstruct if not found or data error
-+*
-+* Parameter:
-+* size: size of bmt and replace pool
-+*
-+* Return:
-+* NULL for failure, and a bmt struct for success
-+*******************************************************************/
-+bmt_struct *init_bmt(struct nand_chip * chip, int size)
-+{
-+ struct mtk_nand_host *host;
-+
-+ if (size > 0 && size < MAX_BMT_SIZE)
-+ {
-+ MSG(INIT, "Init bmt table, size: %d\n", size);
-+ bmt_block_count = size;
-+ } else
-+ {
-+ MSG(INIT, "Invalid bmt table size: %d\n", size);
-+ return NULL;
-+ }
-+ nand_chip_bmt = chip;
-+ system_block_count = chip->chipsize >> chip->phys_erase_shift;
-+ total_block_count = bmt_block_count + system_block_count;
-+ page_per_block = BLOCK_SIZE_BMT / PAGE_SIZE_BMT;
-+ host = (struct mtk_nand_host *)chip->priv;
-+ mtd_bmt = &host->mtd;
-+
-+ MSG(INIT, "mtd_bmt: %p, nand_chip_bmt: %p\n", mtd_bmt, nand_chip_bmt);
-+ MSG(INIT, "bmt count: %d, system count: %d\n", bmt_block_count, system_block_count);
-+
-+ // set this flag, and unmapped block in pool will be erased.
-+ pool_erased = 0;
-+ memset(bmt.table, 0, size * sizeof(bmt_entry));
-+ if ((bmt_block_index = load_bmt_data(system_block_count, size)))
-+ {
-+ MSG(INIT, "Load bmt data success @ block 0x%x\n", bmt_block_index);
-+ dump_bmt_info(&bmt);
-+ return &bmt;
-+ } else
-+ {
-+ MSG(INIT, "Load bmt data fail, need re-construct!\n");
-+#ifndef __UBOOT_NAND__ // BMT is not re-constructed in UBOOT.
-+ if (reconstruct_bmt(&bmt))
-+ return &bmt;
-+ else
-+#endif
-+ return NULL;
-+ }
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Update BMT.
-+*
-+* Parameter:
-+* offset: update block/page offset.
-+* reason: update reason, see update_reason_t for reason.
-+* dat/oob: data and oob buffer for write fail.
-+*
-+* Return:
-+* Return true for success, and false for failure.
-+*******************************************************************/
-+bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob)
-+{
-+ int map_index;
-+ int orig_bad_block = -1;
-+ // int bmt_update_index;
-+ int i;
-+ int bad_index = offset / BLOCK_SIZE_BMT;
-+
-+#ifndef MTK_NAND_BMT
-+ return false;
-+#endif
-+ if (reason == UPDATE_WRITE_FAIL)
-+ {
-+ MSG(INIT, "Write fail, need to migrate\n");
-+ if (!(map_index = migrate_from_bad(offset, dat, oob)))
-+ {
-+ MSG(INIT, "migrate fail\n");
-+ return false;
-+ }
-+ } else
-+ {
-+ if (!(map_index = find_available_block(false)))
-+ {
-+ MSG(INIT, "Cannot find block in pool\n");
-+ return false;
-+ }
-+ }
-+
-+ // now let's update BMT
-+ if (bad_index >= system_block_count) // mapped block become bad, find original bad block
-+ {
-+ for (i = 0; i < bmt_block_count; i++)
-+ {
-+ if (bmt.table[i].mapped_index == bad_index)
-+ {
-+ orig_bad_block = bmt.table[i].bad_index;
-+ break;
-+ }
-+ }
-+ // bmt.bad_count++;
-+ MSG(INIT, "Mapped block becomes bad, orig bad block is 0x%x\n", orig_bad_block);
-+
-+ bmt.table[i].mapped_index = map_index;
-+ } else
-+ {
-+ bmt.table[bmt.mapped_count].mapped_index = map_index;
-+ bmt.table[bmt.mapped_count].bad_index = bad_index;
-+ bmt.mapped_count++;
-+ }
-+
-+ memset(oob_buf, 0xFF, sizeof(oob_buf));
-+ fill_nand_bmt_buffer(&bmt, dat_buf, oob_buf);
-+ if (!write_bmt_to_flash(dat_buf, oob_buf))
-+ return false;
-+
-+ mark_block_bad_bmt(offset);
-+
-+ return true;
-+}
-+
-+/*******************************************************************
-+* [BMT Interface]
-+*
-+* Description:
-+* Given an block index, return mapped index if it's mapped, else
-+* return given index.
-+*
-+* Parameter:
-+* index: given an block index. This value cannot exceed
-+* system_block_count.
-+*
-+* Return NULL for failure
-+*******************************************************************/
-+u16 get_mapping_block_index(int index)
-+{
-+ int i;
-+#ifndef MTK_NAND_BMT
-+ return index;
-+#endif
-+ if (index > system_block_count)
-+ {
-+ return index;
-+ }
-+
-+ for (i = 0; i < bmt.mapped_count; i++)
-+ {
-+ if (bmt.table[i].bad_index == index)
-+ {
-+ return bmt.table[i].mapped_index;
-+ }
-+ }
-+
-+ return index;
-+}
-+#ifdef __KERNEL_NAND__
-+EXPORT_SYMBOL_GPL(init_bmt);
-+EXPORT_SYMBOL_GPL(update_bmt);
-+EXPORT_SYMBOL_GPL(get_mapping_block_index);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("MediaTek");
-+MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver");
-+#endif
---- /dev/null
-+++ b/drivers/mtd/nand/bmt.h
-@@ -0,0 +1,80 @@
-+#ifndef __BMT_H__
-+#define __BMT_H__
-+
-+#include "nand_def.h"
-+
-+#if defined(__PRELOADER_NAND__)
-+
-+#include "nand.h"
-+
-+#elif defined(__UBOOT_NAND__)
-+
-+#include <linux/mtd/nand.h>
-+#include "mtk_nand.h"
-+
-+#elif defined(__KERNEL_NAND__)
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/module.h>
-+#include "mtk_nand.h"
-+
-+#endif
-+
-+
-+#define MAX_BMT_SIZE (0x80)
-+#define BMT_VERSION (1) // initial version
-+
-+#define MAIN_SIGNATURE_OFFSET (0)
-+#define OOB_SIGNATURE_OFFSET (1)
-+#define OOB_INDEX_OFFSET (29)
-+#define OOB_INDEX_SIZE (2)
-+#define FAKE_INDEX (0xAAAA)
-+
-+typedef struct _bmt_entry_
-+{
-+ u16 bad_index; // bad block index
-+ u16 mapped_index; // mapping block index in the replace pool
-+} bmt_entry;
-+
-+typedef enum
-+{
-+ UPDATE_ERASE_FAIL,
-+ UPDATE_WRITE_FAIL,
-+ UPDATE_UNMAPPED_BLOCK,
-+ UPDATE_REASON_COUNT,
-+} update_reason_t;
-+
-+typedef struct
-+{
-+ bmt_entry table[MAX_BMT_SIZE];
-+ u8 version;
-+ u8 mapped_count; // mapped block count in pool
-+ u8 bad_count; // bad block count in pool. Not used in V1
-+} bmt_struct;
-+
-+/***************************************************************
-+* *
-+* Interface BMT need to use *
-+* *
-+***************************************************************/
-+extern bool mtk_nand_exec_read_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob);
-+extern int mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs);
-+extern int mtk_nand_erase_hw(struct mtd_info *mtd, int page);
-+extern int mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t ofs);
-+extern int mtk_nand_exec_write_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob);
-+
-+
-+/***************************************************************
-+* *
-+* Different function interface for preloader/uboot/kernel *
-+* *
-+***************************************************************/
-+void set_bad_index_to_oob(u8 * oob, u16 index);
-+
-+
-+bmt_struct *init_bmt(struct nand_chip *nand, int size);
-+bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob);
-+unsigned short get_mapping_block_index(int index);
-+
-+#endif // #ifndef __BMT_H__
---- /dev/null
-+++ b/drivers/mtd/nand/dev-nand.c
-@@ -0,0 +1,63 @@
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include "mt6575_typedefs.h"
-+
-+#define RALINK_NAND_CTRL_BASE 0xBE003000
-+#define NFI_base RALINK_NAND_CTRL_BASE
-+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
-+#define NFIECC_base RALINK_NANDECC_CTRL_BASE
-+#define MT7621_NFI_IRQ_ID SURFBOARDINT_NAND
-+#define MT7621_NFIECC_IRQ_ID SURFBOARDINT_NAND_ECC
-+
-+#define SURFBOARDINT_NAND 22
-+#define SURFBOARDINT_NAND_ECC 23
-+
-+static struct resource MT7621_resource_nand[] = {
-+ {
-+ .start = NFI_base,
-+ .end = NFI_base + 0x1A0,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = NFIECC_base,
-+ .end = NFIECC_base + 0x150,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = MT7621_NFI_IRQ_ID,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ .start = MT7621_NFIECC_IRQ_ID,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device MT7621_nand_dev = {
-+ .name = "MT7621-NAND",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(MT7621_resource_nand),
-+ .resource = MT7621_resource_nand,
-+ .dev = {
-+ .platform_data = &mt7621_nand_hw,
-+ },
-+};
-+
-+
-+int __init mtk_nand_register(void)
-+{
-+
-+ int retval = 0;
-+
-+ retval = platform_device_register(&MT7621_nand_dev);
-+ if (retval != 0) {
-+ printk(KERN_ERR "register nand device fail\n");
-+ return retval;
-+ }
-+
-+
-+ return retval;
-+}
-+arch_initcall(mtk_nand_register);
---- /dev/null
-+++ b/drivers/mtd/nand/mt6575_typedefs.h
-@@ -0,0 +1,340 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+/*****************************************************************************
-+* Copyright Statement:
-+* --------------------
-+* This software is protected by Copyright and the information contained
-+* herein is confidential. The software may not be copied and the information
-+* contained herein may not be used or disclosed except with the written
-+* permission of MediaTek Inc. (C) 2008
-+*
-+* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
-+* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
-+* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
-+* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
-+* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
-+*
-+* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
-+* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
-+* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+*
-+* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
-+* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
-+* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
-+* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
-+* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
-+*
-+*****************************************************************************/
-+
-+#ifndef _MT6575_TYPEDEFS_H
-+#define _MT6575_TYPEDEFS_H
-+
-+#if defined (__KERNEL_NAND__)
-+#include <linux/bug.h>
-+#else
-+#define true 1
-+#define false 0
-+#define bool u8
-+#endif
-+
-+// ---------------------------------------------------------------------------
-+// Basic Type Definitions
-+// ---------------------------------------------------------------------------
-+
-+typedef volatile unsigned char *P_kal_uint8;
-+typedef volatile unsigned short *P_kal_uint16;
-+typedef volatile unsigned int *P_kal_uint32;
-+
-+typedef long LONG;
-+typedef unsigned char UBYTE;
-+typedef short SHORT;
-+
-+typedef signed char kal_int8;
-+typedef signed short kal_int16;
-+typedef signed int kal_int32;
-+typedef long long kal_int64;
-+typedef unsigned char kal_uint8;
-+typedef unsigned short kal_uint16;
-+typedef unsigned int kal_uint32;
-+typedef unsigned long long kal_uint64;
-+typedef char kal_char;
-+
-+typedef unsigned int *UINT32P;
-+typedef volatile unsigned short *UINT16P;
-+typedef volatile unsigned char *UINT8P;
-+typedef unsigned char *U8P;
-+
-+typedef volatile unsigned char *P_U8;
-+typedef volatile signed char *P_S8;
-+typedef volatile unsigned short *P_U16;
-+typedef volatile signed short *P_S16;
-+typedef volatile unsigned int *P_U32;
-+typedef volatile signed int *P_S32;
-+typedef unsigned long long *P_U64;
-+typedef signed long long *P_S64;
-+
-+typedef unsigned char U8;
-+typedef signed char S8;
-+typedef unsigned short U16;
-+typedef signed short S16;
-+typedef unsigned int U32;
-+typedef signed int S32;
-+typedef unsigned long long U64;
-+typedef signed long long S64;
-+//typedef unsigned char bool;
-+
-+typedef unsigned char UINT8;
-+typedef unsigned short UINT16;
-+typedef unsigned int UINT32;
-+typedef unsigned short USHORT;
-+typedef signed char INT8;
-+typedef signed short INT16;
-+typedef signed int INT32;
-+typedef unsigned int DWORD;
-+typedef void VOID;
-+typedef unsigned char BYTE;
-+typedef float FLOAT;
-+
-+typedef char *LPCSTR;
-+typedef short *LPWSTR;
-+
-+
-+// ---------------------------------------------------------------------------
-+// Constants
-+// ---------------------------------------------------------------------------
-+
-+#define IMPORT EXTERN
-+#ifndef __cplusplus
-+ #define EXTERN extern
-+#else
-+ #define EXTERN extern "C"
-+#endif
-+#define LOCAL static
-+#define GLOBAL
-+#define EXPORT GLOBAL
-+
-+#define EQ ==
-+#define NEQ !=
-+#define AND &&
-+#define OR ||
-+#define XOR(A,B) ((!(A) AND (B)) OR ((A) AND !(B)))
-+
-+#ifndef FALSE
-+ #define FALSE (0)
-+#endif
-+
-+#ifndef TRUE
-+ #define TRUE (1)
-+#endif
-+
-+#ifndef NULL
-+ #define NULL (0)
-+#endif
-+
-+//enum boolean {false, true};
-+enum {RX, TX, NONE};
-+
-+#ifndef BOOL
-+typedef unsigned char BOOL;
-+#endif
-+
-+typedef enum {
-+ KAL_FALSE = 0,
-+ KAL_TRUE = 1,
-+} kal_bool;
-+
-+
-+// ---------------------------------------------------------------------------
-+// Type Casting
-+// ---------------------------------------------------------------------------
-+
-+#define AS_INT32(x) (*(INT32 *)((void*)x))
-+#define AS_INT16(x) (*(INT16 *)((void*)x))
-+#define AS_INT8(x) (*(INT8 *)((void*)x))
-+
-+#define AS_UINT32(x) (*(UINT32 *)((void*)x))
-+#define AS_UINT16(x) (*(UINT16 *)((void*)x))
-+#define AS_UINT8(x) (*(UINT8 *)((void*)x))
-+
-+
-+// ---------------------------------------------------------------------------
-+// Register Manipulations
-+// ---------------------------------------------------------------------------
-+
-+#define READ_REGISTER_UINT32(reg) \
-+ (*(volatile UINT32 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT32(reg, val) \
-+ (*(volatile UINT32 * const)(reg)) = (val)
-+
-+#define READ_REGISTER_UINT16(reg) \
-+ (*(volatile UINT16 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT16(reg, val) \
-+ (*(volatile UINT16 * const)(reg)) = (val)
-+
-+#define READ_REGISTER_UINT8(reg) \
-+ (*(volatile UINT8 * const)(reg))
-+
-+#define WRITE_REGISTER_UINT8(reg, val) \
-+ (*(volatile UINT8 * const)(reg)) = (val)
-+
-+#define INREG8(x) READ_REGISTER_UINT8((UINT8*)((void*)(x)))
-+#define OUTREG8(x, y) WRITE_REGISTER_UINT8((UINT8*)((void*)(x)), (UINT8)(y))
-+#define SETREG8(x, y) OUTREG8(x, INREG8(x)|(y))
-+#define CLRREG8(x, y) OUTREG8(x, INREG8(x)&~(y))
-+#define MASKREG8(x, y, z) OUTREG8(x, (INREG8(x)&~(y))|(z))
-+
-+#define INREG16(x) READ_REGISTER_UINT16((UINT16*)((void*)(x)))
-+#define OUTREG16(x, y) WRITE_REGISTER_UINT16((UINT16*)((void*)(x)),(UINT16)(y))
-+#define SETREG16(x, y) OUTREG16(x, INREG16(x)|(y))
-+#define CLRREG16(x, y) OUTREG16(x, INREG16(x)&~(y))
-+#define MASKREG16(x, y, z) OUTREG16(x, (INREG16(x)&~(y))|(z))
-+
-+#define INREG32(x) READ_REGISTER_UINT32((UINT32*)((void*)(x)))
-+#define OUTREG32(x, y) WRITE_REGISTER_UINT32((UINT32*)((void*)(x)), (UINT32)(y))
-+#define SETREG32(x, y) OUTREG32(x, INREG32(x)|(y))
-+#define CLRREG32(x, y) OUTREG32(x, INREG32(x)&~(y))
-+#define MASKREG32(x, y, z) OUTREG32(x, (INREG32(x)&~(y))|(z))
-+
-+
-+#define DRV_Reg8(addr) INREG8(addr)
-+#define DRV_WriteReg8(addr, data) OUTREG8(addr, data)
-+#define DRV_SetReg8(addr, data) SETREG8(addr, data)
-+#define DRV_ClrReg8(addr, data) CLRREG8(addr, data)
-+
-+#define DRV_Reg16(addr) INREG16(addr)
-+#define DRV_WriteReg16(addr, data) OUTREG16(addr, data)
-+#define DRV_SetReg16(addr, data) SETREG16(addr, data)
-+#define DRV_ClrReg16(addr, data) CLRREG16(addr, data)
-+
-+#define DRV_Reg32(addr) INREG32(addr)
-+#define DRV_WriteReg32(addr, data) OUTREG32(addr, data)
-+#define DRV_SetReg32(addr, data) SETREG32(addr, data)
-+#define DRV_ClrReg32(addr, data) CLRREG32(addr, data)
-+
-+// !!! DEPRECATED, WILL BE REMOVED LATER !!!
-+#define DRV_Reg(addr) DRV_Reg16(addr)
-+#define DRV_WriteReg(addr, data) DRV_WriteReg16(addr, data)
-+#define DRV_SetReg(addr, data) DRV_SetReg16(addr, data)
-+#define DRV_ClrReg(addr, data) DRV_ClrReg16(addr, data)
-+
-+
-+// ---------------------------------------------------------------------------
-+// Compiler Time Deduction Macros
-+// ---------------------------------------------------------------------------
-+
-+#define _MASK_OFFSET_1(x, n) ((x) & 0x1) ? (n) :
-+#define _MASK_OFFSET_2(x, n) _MASK_OFFSET_1((x), (n)) _MASK_OFFSET_1((x) >> 1, (n) + 1)
-+#define _MASK_OFFSET_4(x, n) _MASK_OFFSET_2((x), (n)) _MASK_OFFSET_2((x) >> 2, (n) + 2)
-+#define _MASK_OFFSET_8(x, n) _MASK_OFFSET_4((x), (n)) _MASK_OFFSET_4((x) >> 4, (n) + 4)
-+#define _MASK_OFFSET_16(x, n) _MASK_OFFSET_8((x), (n)) _MASK_OFFSET_8((x) >> 8, (n) + 8)
-+#define _MASK_OFFSET_32(x, n) _MASK_OFFSET_16((x), (n)) _MASK_OFFSET_16((x) >> 16, (n) + 16)
-+
-+#define MASK_OFFSET_ERROR (0xFFFFFFFF)
-+
-+#define MASK_OFFSET(x) (_MASK_OFFSET_32(x, 0) MASK_OFFSET_ERROR)
-+
-+
-+// ---------------------------------------------------------------------------
-+// Assertions
-+// ---------------------------------------------------------------------------
-+
-+#ifndef ASSERT
-+ #define ASSERT(expr) BUG_ON(!(expr))
-+#endif
-+
-+#ifndef NOT_IMPLEMENTED
-+ #define NOT_IMPLEMENTED() BUG_ON(1)
-+#endif
-+
-+#define STATIC_ASSERT(pred) STATIC_ASSERT_X(pred, __LINE__)
-+#define STATIC_ASSERT_X(pred, line) STATIC_ASSERT_XX(pred, line)
-+#define STATIC_ASSERT_XX(pred, line) \
-+ extern char assertion_failed_at_##line[(pred) ? 1 : -1]
-+
-+// ---------------------------------------------------------------------------
-+// Resolve Compiler Warnings
-+// ---------------------------------------------------------------------------
-+
-+#define NOT_REFERENCED(x) { (x) = (x); }
-+
-+
-+// ---------------------------------------------------------------------------
-+// Utilities
-+// ---------------------------------------------------------------------------
-+
-+#define MAXIMUM(A,B) (((A)>(B))?(A):(B))
-+#define MINIMUM(A,B) (((A)<(B))?(A):(B))
-+
-+#define ARY_SIZE(x) (sizeof((x)) / sizeof((x[0])))
-+#define DVT_DELAYMACRO(u4Num) \
-+{ \
-+ UINT32 u4Count = 0 ; \
-+ for (u4Count = 0; u4Count < u4Num; u4Count++ ); \
-+} \
-+
-+#define A68351B 0
-+#define B68351B 1
-+#define B68351D 2
-+#define B68351E 3
-+#define UNKNOWN_IC_VERSION 0xFF
-+
-+/* NAND driver */
-+struct mtk_nand_host_hw {
-+ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
-+ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
-+ unsigned int nfi_cs_num; /* NFI_CS_NUM */
-+ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
-+ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
-+ unsigned int nand_ecc_size;
-+ unsigned int nand_ecc_bytes;
-+ unsigned int nand_ecc_mode;
-+};
-+extern struct mtk_nand_host_hw mt7621_nand_hw;
-+extern unsigned int CFG_BLOCKSIZE;
-+
-+#endif // _MT6575_TYPEDEFS_H
-+
---- /dev/null
-+++ b/drivers/mtd/nand/mtk_nand.c
-@@ -0,0 +1,2304 @@
-+/******************************************************************************
-+* mtk_nand.c - MTK NAND Flash Device Driver
-+ *
-+* Copyright 2009-2012 MediaTek Co.,Ltd.
-+ *
-+* DESCRIPTION:
-+* This file provid the other drivers nand relative functions
-+ *
-+* modification history
-+* ----------------------------------------
-+* v3.0, 11 Feb 2010, mtk
-+* ----------------------------------------
-+******************************************************************************/
-+#include "nand_def.h"
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/wait.h>
-+#include <linux/spinlock.h>
-+#include <linux/interrupt.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/nand_ecc.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/jiffies.h>
-+#include <linux/platform_device.h>
-+#include <linux/proc_fs.h>
-+#include <linux/time.h>
-+#include <linux/mm.h>
-+#include <asm/io.h>
-+#include <asm/cacheflush.h>
-+#include <asm/uaccess.h>
-+#include <linux/miscdevice.h>
-+#include "mtk_nand.h"
-+#include "nand_device_list.h"
-+
-+#include "bmt.h"
-+#include "partition.h"
-+
-+unsigned int CFG_BLOCKSIZE;
-+
-+static int shift_on_bbt = 0;
-+extern void nand_bbt_set(struct mtd_info *mtd, int page, int flag);
-+extern int nand_bbt_get(struct mtd_info *mtd, int page);
-+int mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page);
-+
-+static const char * const probe_types[] = { "cmdlinepart", "ofpart", NULL };
-+
-+#define NAND_CMD_STATUS_MULTI 0x71
-+
-+void show_stack(struct task_struct *tsk, unsigned long *sp);
-+extern void mt_irq_set_sens(unsigned int irq, unsigned int sens);
-+extern void mt_irq_set_polarity(unsigned int irq,unsigned int polarity);
-+
-+struct mtk_nand_host mtk_nand_host; /* include mtd_info and nand_chip structs */
-+struct mtk_nand_host_hw mt7621_nand_hw = {
-+ .nfi_bus_width = 8,
-+ .nfi_access_timing = NFI_DEFAULT_ACCESS_TIMING,
-+ .nfi_cs_num = NFI_CS_NUM,
-+ .nand_sec_size = 512,
-+ .nand_sec_shift = 9,
-+ .nand_ecc_size = 2048,
-+ .nand_ecc_bytes = 32,
-+ .nand_ecc_mode = NAND_ECC_HW,
-+};
-+
-+
-+/*******************************************************************************
-+ * Gloable Varible Definition
-+ *******************************************************************************/
-+
-+#define NFI_ISSUE_COMMAND(cmd, col_addr, row_addr, col_num, row_num) \
-+ do { \
-+ DRV_WriteReg(NFI_CMD_REG16,cmd);\
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_CMD_STATE);\
-+ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);\
-+ DRV_WriteReg32(NFI_ROWADDR_REG32, row_addr);\
-+ DRV_WriteReg(NFI_ADDRNOB_REG16, col_num | (row_num<<ADDR_ROW_NOB_SHIFT));\
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_ADDR_STATE);\
-+ }while(0);
-+
-+//-------------------------------------------------------------------------------
-+static struct NAND_CMD g_kCMD;
-+static u32 g_u4ChipVer;
-+bool g_bInitDone;
-+static bool g_bcmdstatus;
-+static u32 g_value = 0;
-+static int g_page_size;
-+
-+BOOL g_bHwEcc = true;
-+
-+
-+static u8 *local_buffer_16_align; // 16 byte aligned buffer, for HW issue
-+static u8 local_buffer[4096 + 512];
-+
-+extern void nand_release_device(struct mtd_info *mtd);
-+extern int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state);
-+
-+#if defined(MTK_NAND_BMT)
-+static bmt_struct *g_bmt;
-+#endif
-+struct mtk_nand_host *host;
-+extern struct mtd_partition g_pasStatic_Partition[];
-+int part_num = NUM_PARTITIONS;
-+int manu_id;
-+int dev_id;
-+
-+static u8 local_oob_buf[NAND_MAX_OOBSIZE];
-+
-+static u8 nand_badblock_offset = 0;
-+
-+void nand_enable_clock(void)
-+{
-+ //enable_clock(MT65XX_PDN_PERI_NFI, "NAND");
-+}
-+
-+void nand_disable_clock(void)
-+{
-+ //disable_clock(MT65XX_PDN_PERI_NFI, "NAND");
-+}
-+
-+static struct nand_ecclayout nand_oob_16 = {
-+ .eccbytes = 8,
-+ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
-+ .oobfree = {{1, 6}, {0, 0}}
-+};
-+
-+struct nand_ecclayout nand_oob_64 = {
-+ .eccbytes = 32,
-+ .eccpos = {32, 33, 34, 35, 36, 37, 38, 39,
-+ 40, 41, 42, 43, 44, 45, 46, 47,
-+ 48, 49, 50, 51, 52, 53, 54, 55,
-+ 56, 57, 58, 59, 60, 61, 62, 63},
-+ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 6}, {0, 0}}
-+};
-+
-+struct nand_ecclayout nand_oob_128 = {
-+ .eccbytes = 64,
-+ .eccpos = {
-+ 64, 65, 66, 67, 68, 69, 70, 71,
-+ 72, 73, 74, 75, 76, 77, 78, 79,
-+ 80, 81, 82, 83, 84, 85, 86, 86,
-+ 88, 89, 90, 91, 92, 93, 94, 95,
-+ 96, 97, 98, 99, 100, 101, 102, 103,
-+ 104, 105, 106, 107, 108, 109, 110, 111,
-+ 112, 113, 114, 115, 116, 117, 118, 119,
-+ 120, 121, 122, 123, 124, 125, 126, 127},
-+ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 7}, {33, 7}, {41, 7}, {49, 7}, {57, 6}}
-+};
-+
-+flashdev_info devinfo;
-+
-+void dump_nfi(void)
-+{
-+}
-+
-+void dump_ecc(void)
-+{
-+}
-+
-+u32
-+nand_virt_to_phys_add(u32 va)
-+{
-+ u32 pageOffset = (va & (PAGE_SIZE - 1));
-+ pgd_t *pgd;
-+ pmd_t *pmd;
-+ pte_t *pte;
-+ u32 pa;
-+
-+ if (virt_addr_valid(va))
-+ return __virt_to_phys(va);
-+
-+ if (NULL == current) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR ,current is NULL! \n");
-+ return 0;
-+ }
-+
-+ if (NULL == current->mm) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR current->mm is NULL! tgid=0x%x, name=%s \n", current->tgid, current->comm);
-+ return 0;
-+ }
-+
-+ pgd = pgd_offset(current->mm, va); /* what is tsk->mm */
-+ if (pgd_none(*pgd) || pgd_bad(*pgd)) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pgd invalid! \n", va);
-+ return 0;
-+ }
-+
-+ pmd = pmd_offset((pud_t *)pgd, va);
-+ if (pmd_none(*pmd) || pmd_bad(*pmd)) {
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pmd invalid! \n", va);
-+ return 0;
-+ }
-+
-+ pte = pte_offset_map(pmd, va);
-+ if (pte_present(*pte)) {
-+ pa = (pte_val(*pte) & (PAGE_MASK)) | pageOffset;
-+ return pa;
-+ }
-+
-+ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR va=0x%x, pte invalid! \n", va);
-+ return 0;
-+}
-+EXPORT_SYMBOL(nand_virt_to_phys_add);
-+
-+bool
-+get_device_info(u16 id, u32 ext_id, flashdev_info * pdevinfo)
-+{
-+ u32 index;
-+ for (index = 0; gen_FlashTable[index].id != 0; index++) {
-+ if (id == gen_FlashTable[index].id && ext_id == gen_FlashTable[index].ext_id) {
-+ pdevinfo->id = gen_FlashTable[index].id;
-+ pdevinfo->ext_id = gen_FlashTable[index].ext_id;
-+ pdevinfo->blocksize = gen_FlashTable[index].blocksize;
-+ pdevinfo->addr_cycle = gen_FlashTable[index].addr_cycle;
-+ pdevinfo->iowidth = gen_FlashTable[index].iowidth;
-+ pdevinfo->timmingsetting = gen_FlashTable[index].timmingsetting;
-+ pdevinfo->advancedmode = gen_FlashTable[index].advancedmode;
-+ pdevinfo->pagesize = gen_FlashTable[index].pagesize;
-+ pdevinfo->sparesize = gen_FlashTable[index].sparesize;
-+ pdevinfo->totalsize = gen_FlashTable[index].totalsize;
-+ memcpy(pdevinfo->devciename, gen_FlashTable[index].devciename, sizeof(pdevinfo->devciename));
-+ printk(KERN_INFO "Device found in MTK table, ID: %x, EXT_ID: %x\n", id, ext_id);
-+
-+ goto find;
-+ }
-+ }
-+
-+find:
-+ if (0 == pdevinfo->id) {
-+ printk(KERN_INFO "Device not found, ID: %x\n", id);
-+ return false;
-+ } else {
-+ return true;
-+ }
-+}
-+
-+static void
-+ECC_Config(struct mtk_nand_host_hw *hw,u32 ecc_bit)
-+{
-+ u32 u4ENCODESize;
-+ u32 u4DECODESize;
-+ u32 ecc_bit_cfg = ECC_CNFG_ECC4;
-+
-+ switch(ecc_bit){
-+ case 4:
-+ ecc_bit_cfg = ECC_CNFG_ECC4;
-+ break;
-+ case 8:
-+ ecc_bit_cfg = ECC_CNFG_ECC8;
-+ break;
-+ case 10:
-+ ecc_bit_cfg = ECC_CNFG_ECC10;
-+ break;
-+ case 12:
-+ ecc_bit_cfg = ECC_CNFG_ECC12;
-+ break;
-+ default:
-+ break;
-+ }
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE);
-+ do {
-+ } while (!DRV_Reg16(ECC_DECIDLE_REG16));
-+
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE);
-+ do {
-+ } while (!DRV_Reg32(ECC_ENCIDLE_REG32));
-+
-+ /* setup FDM register base */
-+ DRV_WriteReg32(ECC_FDMADDR_REG32, NFI_FDM0L_REG32);
-+
-+ /* Sector + FDM */
-+ u4ENCODESize = (hw->nand_sec_size + 8) << 3;
-+ /* Sector + FDM + YAFFS2 meta data bits */
-+ u4DECODESize = ((hw->nand_sec_size + 8) << 3) + ecc_bit * 13;
-+
-+ /* configure ECC decoder && encoder */
-+ DRV_WriteReg32(ECC_DECCNFG_REG32, ecc_bit_cfg | DEC_CNFG_NFI | DEC_CNFG_EMPTY_EN | (u4DECODESize << DEC_CNFG_CODE_SHIFT));
-+
-+ DRV_WriteReg32(ECC_ENCCNFG_REG32, ecc_bit_cfg | ENC_CNFG_NFI | (u4ENCODESize << ENC_CNFG_MSG_SHIFT));
-+ NFI_SET_REG32(ECC_DECCNFG_REG32, DEC_CNFG_EL);
-+}
-+
-+static void
-+ECC_Decode_Start(void)
-+{
-+ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE))
-+ ;
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_EN);
-+}
-+
-+static void
-+ECC_Decode_End(void)
-+{
-+ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE))
-+ ;
-+ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE);
-+}
-+
-+static void
-+ECC_Encode_Start(void)
-+{
-+ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE))
-+ ;
-+ mb();
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_EN);
-+}
-+
-+static void
-+ECC_Encode_End(void)
-+{
-+ /* wait for device returning idle */
-+ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE)) ;
-+ mb();
-+ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE);
-+}
-+
-+static bool
-+mtk_nand_check_bch_error(struct mtd_info *mtd, u8 * pDataBuf, u32 u4SecIndex, u32 u4PageAddr)
-+{
-+ bool bRet = true;
-+ u16 u2SectorDoneMask = 1 << u4SecIndex;
-+ u32 u4ErrorNumDebug, i, u4ErrNum;
-+ u32 timeout = 0xFFFF;
-+ // int el;
-+ u32 au4ErrBitLoc[6];
-+ u32 u4ErrByteLoc, u4BitOffset;
-+ u32 u4ErrBitLoc1th, u4ErrBitLoc2nd;
-+
-+ //4 // Wait for Decode Done
-+ while (0 == (u2SectorDoneMask & DRV_Reg16(ECC_DECDONE_REG16))) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ /* We will manually correct the error bits in the last sector, not all the sectors of the page! */
-+ memset(au4ErrBitLoc, 0x0, sizeof(au4ErrBitLoc));
-+ u4ErrorNumDebug = DRV_Reg32(ECC_DECENUM_REG32);
-+ u4ErrNum = DRV_Reg32(ECC_DECENUM_REG32) >> (u4SecIndex << 2);
-+ u4ErrNum &= 0xF;
-+
-+ if (u4ErrNum) {
-+ if (0xF == u4ErrNum) {
-+ mtd->ecc_stats.failed++;
-+ bRet = false;
-+ //printk(KERN_ERR"UnCorrectable at PageAddr=%d\n", u4PageAddr);
-+ } else {
-+ for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) {
-+ au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i);
-+ u4ErrBitLoc1th = au4ErrBitLoc[i] & 0x1FFF;
-+ if (u4ErrBitLoc1th < 0x1000) {
-+ u4ErrByteLoc = u4ErrBitLoc1th / 8;
-+ u4BitOffset = u4ErrBitLoc1th % 8;
-+ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset);
-+ mtd->ecc_stats.corrected++;
-+ } else {
-+ mtd->ecc_stats.failed++;
-+ }
-+ u4ErrBitLoc2nd = (au4ErrBitLoc[i] >> 16) & 0x1FFF;
-+ if (0 != u4ErrBitLoc2nd) {
-+ if (u4ErrBitLoc2nd < 0x1000) {
-+ u4ErrByteLoc = u4ErrBitLoc2nd / 8;
-+ u4BitOffset = u4ErrBitLoc2nd % 8;
-+ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset);
-+ mtd->ecc_stats.corrected++;
-+ } else {
-+ mtd->ecc_stats.failed++;
-+ //printk(KERN_ERR"UnCorrectable High ErrLoc=%d\n", au4ErrBitLoc[i]);
-+ }
-+ }
-+ }
-+ }
-+ if (0 == (DRV_Reg16(ECC_DECFER_REG16) & (1 << u4SecIndex)))
-+ bRet = false;
-+ }
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_RFIFOValidSize(u16 u2Size)
-+{
-+ u32 timeout = 0xFFFF;
-+ while (FIFO_RD_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) < u2Size) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_WFIFOValidSize(u16 u2Size)
-+{
-+ u32 timeout = 0xFFFF;
-+
-+ while (FIFO_WR_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) > u2Size) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_status_ready(u32 u4Status)
-+{
-+ u32 timeout = 0xFFFF;
-+
-+ while ((DRV_Reg32(NFI_STA_REG32) & u4Status) != 0) {
-+ timeout--;
-+ if (0 == timeout)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_reset(void)
-+{
-+ int timeout = 0xFFFF;
-+ if (DRV_Reg16(NFI_MASTERSTA_REG16)) {
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST);
-+ while (DRV_Reg16(NFI_MASTERSTA_REG16)) {
-+ timeout--;
-+ if (!timeout)
-+ MSG(INIT, "Wait for NFI_MASTERSTA timeout\n");
-+ }
-+ }
-+ /* issue reset operation */
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST);
-+
-+ return mtk_nand_status_ready(STA_NFI_FSM_MASK | STA_NAND_BUSY) && mtk_nand_RFIFOValidSize(0) && mtk_nand_WFIFOValidSize(0);
-+}
-+
-+static void
-+mtk_nand_set_mode(u16 u2OpMode)
-+{
-+ u16 u2Mode = DRV_Reg16(NFI_CNFG_REG16);
-+ u2Mode &= ~CNFG_OP_MODE_MASK;
-+ u2Mode |= u2OpMode;
-+ DRV_WriteReg16(NFI_CNFG_REG16, u2Mode);
-+}
-+
-+static void
-+mtk_nand_set_autoformat(bool bEnable)
-+{
-+ if (bEnable)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN);
-+}
-+
-+static void
-+mtk_nand_configure_fdm(u16 u2FDMSize)
-+{
-+ NFI_CLN_REG16(NFI_PAGEFMT_REG16, PAGEFMT_FDM_MASK | PAGEFMT_FDM_ECC_MASK);
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_SHIFT);
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_ECC_SHIFT);
-+}
-+
-+static void
-+mtk_nand_configure_lock(void)
-+{
-+ u32 u4WriteColNOB = 2;
-+ u32 u4WriteRowNOB = 3;
-+ u32 u4EraseColNOB = 0;
-+ u32 u4EraseRowNOB = 3;
-+ DRV_WriteReg16(NFI_LOCKANOB_REG16,
-+ (u4WriteColNOB << PROG_CADD_NOB_SHIFT) | (u4WriteRowNOB << PROG_RADD_NOB_SHIFT) | (u4EraseColNOB << ERASE_CADD_NOB_SHIFT) | (u4EraseRowNOB << ERASE_RADD_NOB_SHIFT));
-+
-+ if (CHIPVER_ECO_1 == g_u4ChipVer) {
-+ int i;
-+ for (i = 0; i < 16; ++i) {
-+ DRV_WriteReg32(NFI_LOCK00ADD_REG32 + (i << 1), 0xFFFFFFFF);
-+ DRV_WriteReg32(NFI_LOCK00FMT_REG32 + (i << 1), 0xFFFFFFFF);
-+ }
-+ //DRV_WriteReg16(NFI_LOCKANOB_REG16, 0x0);
-+ DRV_WriteReg32(NFI_LOCKCON_REG32, 0xFFFFFFFF);
-+ DRV_WriteReg16(NFI_LOCK_REG16, NFI_LOCK_ON);
-+ }
-+}
-+
-+static bool
-+mtk_nand_pio_ready(void)
-+{
-+ int count = 0;
-+ while (!(DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1)) {
-+ count++;
-+ if (count > 0xffff) {
-+ printk("PIO_DIRDY timeout\n");
-+ return false;
-+ }
-+ }
-+
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_set_command(u16 command)
-+{
-+ mb();
-+ DRV_WriteReg16(NFI_CMD_REG16, command);
-+ return mtk_nand_status_ready(STA_CMD_STATE);
-+}
-+
-+static bool
-+mtk_nand_set_address(u32 u4ColAddr, u32 u4RowAddr, u16 u2ColNOB, u16 u2RowNOB)
-+{
-+ mb();
-+ DRV_WriteReg32(NFI_COLADDR_REG32, u4ColAddr);
-+ DRV_WriteReg32(NFI_ROWADDR_REG32, u4RowAddr);
-+ DRV_WriteReg16(NFI_ADDRNOB_REG16, u2ColNOB | (u2RowNOB << ADDR_ROW_NOB_SHIFT));
-+ return mtk_nand_status_ready(STA_ADDR_STATE);
-+}
-+
-+static bool
-+mtk_nand_check_RW_count(u16 u2WriteSize)
-+{
-+ u32 timeout = 0xFFFF;
-+ u16 u2SecNum = u2WriteSize >> 9;
-+
-+ while (ADDRCNTR_CNTR(DRV_Reg16(NFI_ADDRCNTR_REG16)) < u2SecNum) {
-+ timeout--;
-+ if (0 == timeout) {
-+ printk(KERN_INFO "[%s] timeout\n", __FUNCTION__);
-+ return false;
-+ }
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_ready_for_read(struct nand_chip *nand, u32 u4RowAddr, u32 u4ColAddr, bool full, u8 * buf)
-+{
-+ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */
-+ bool bRet = false;
-+ u16 sec_num = 1 << (nand->page_shift - 9);
-+ u32 col_addr = u4ColAddr;
-+ u32 colnob = 2, rownob = devinfo.addr_cycle - 2;
-+ if (nand->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+
-+ if (!mtk_nand_reset())
-+ goto cleanup;
-+ if (g_bHwEcc) {
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ }
-+
-+ mtk_nand_set_mode(CNFG_OP_READ);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT);
-+
-+ if (full) {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+
-+ if (g_bHwEcc)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ }
-+
-+ mtk_nand_set_autoformat(full);
-+ if (full)
-+ if (g_bHwEcc)
-+ ECC_Decode_Start();
-+ if (!mtk_nand_set_command(NAND_CMD_READ0))
-+ goto cleanup;
-+ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob))
-+ goto cleanup;
-+ if (!mtk_nand_set_command(NAND_CMD_READSTART))
-+ goto cleanup;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto cleanup;
-+
-+ bRet = true;
-+
-+cleanup:
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_ready_for_write(struct nand_chip *nand, u32 u4RowAddr, u32 col_addr, bool full, u8 * buf)
-+{
-+ bool bRet = false;
-+ u32 sec_num = 1 << (nand->page_shift - 9);
-+ u32 colnob = 2, rownob = devinfo.addr_cycle - 2;
-+ if (nand->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+
-+ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */
-+ if (!mtk_nand_reset())
-+ return false;
-+
-+ mtk_nand_set_mode(CNFG_OP_PRGM);
-+
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+
-+ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT);
-+
-+ if (full) {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ if (g_bHwEcc)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ }
-+
-+ mtk_nand_set_autoformat(full);
-+
-+ if (full)
-+ if (g_bHwEcc)
-+ ECC_Encode_Start();
-+
-+ if (!mtk_nand_set_command(NAND_CMD_SEQIN))
-+ goto cleanup;
-+ //1 FIXED ME: For Any Kind of AddrCycle
-+ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob))
-+ goto cleanup;
-+
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto cleanup;
-+
-+ bRet = true;
-+
-+cleanup:
-+ return bRet;
-+}
-+
-+static bool
-+mtk_nand_check_dececc_done(u32 u4SecNum)
-+{
-+ u32 timeout, dec_mask;
-+
-+ timeout = 0xffff;
-+ dec_mask = (1 << u4SecNum) - 1;
-+ while ((dec_mask != DRV_Reg(ECC_DECDONE_REG16)) && timeout > 0)
-+ timeout--;
-+ if (timeout == 0) {
-+ MSG(VERIFY, "ECC_DECDONE: timeout\n");
-+ return false;
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_mcu_read_data(u8 * buf, u32 length)
-+{
-+ int timeout = 0xffff;
-+ u32 i;
-+ u32 *buf32 = (u32 *) buf;
-+ if ((u32) buf % 4 || length % 4)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+
-+ //DRV_WriteReg32(NFI_STRADDR_REG32, 0);
-+ mb();
-+ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+
-+ if ((u32) buf % 4 || length % 4) {
-+ for (i = 0; (i < (length)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ *buf++ = (u8) DRV_Reg32(NFI_DATAR_REG32);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ } else {
-+ for (i = 0; (i < (length >> 2)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ *buf32++ = DRV_Reg32(NFI_DATAR_REG32);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ }
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_read_page_data(struct mtd_info *mtd, u8 * pDataBuf, u32 u4Size)
-+{
-+ return mtk_nand_mcu_read_data(pDataBuf, u4Size);
-+}
-+
-+static bool
-+mtk_nand_mcu_write_data(struct mtd_info *mtd, const u8 * buf, u32 length)
-+{
-+ u32 timeout = 0xFFFF;
-+ u32 i;
-+ u32 *pBuf32;
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ mb();
-+ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ pBuf32 = (u32 *) buf;
-+
-+ if ((u32) buf % 4 || length % 4)
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ else
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+
-+ if ((u32) buf % 4 || length % 4) {
-+ for (i = 0; (i < (length)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ DRV_WriteReg32(NFI_DATAW_REG32, *buf++);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ } else {
-+ for (i = 0; (i < (length >> 2)) && (timeout > 0);) {
-+ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) {
-+ DRV_WriteReg32(NFI_DATAW_REG32, *pBuf32++);
-+ i++;
-+ } else {
-+ timeout--;
-+ }
-+ if (0 == timeout) {
-+ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__);
-+ dump_nfi();
-+ return false;
-+ }
-+ }
-+ }
-+
-+ return true;
-+}
-+
-+static bool
-+mtk_nand_write_page_data(struct mtd_info *mtd, u8 * buf, u32 size)
-+{
-+ return mtk_nand_mcu_write_data(mtd, buf, size);
-+}
-+
-+static void
-+mtk_nand_read_fdm_data(u8 * pDataBuf, u32 u4SecNum)
-+{
-+ u32 i;
-+ u32 *pBuf32 = (u32 *) pDataBuf;
-+
-+ if (pBuf32) {
-+ for (i = 0; i < u4SecNum; ++i) {
-+ *pBuf32++ = DRV_Reg32(NFI_FDM0L_REG32 + (i << 1));
-+ *pBuf32++ = DRV_Reg32(NFI_FDM0M_REG32 + (i << 1));
-+ }
-+ }
-+}
-+
-+static u8 fdm_buf[64];
-+static void
-+mtk_nand_write_fdm_data(struct nand_chip *chip, u8 * pDataBuf, u32 u4SecNum)
-+{
-+ u32 i, j;
-+ u8 checksum = 0;
-+ bool empty = true;
-+ struct nand_oobfree *free_entry;
-+ u32 *pBuf32;
-+
-+ memcpy(fdm_buf, pDataBuf, u4SecNum * 8);
-+
-+ free_entry = chip->ecc.layout->oobfree;
-+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free_entry[i].length; i++) {
-+ for (j = 0; j < free_entry[i].length; j++) {
-+ if (pDataBuf[free_entry[i].offset + j] != 0xFF)
-+ empty = false;
-+ checksum ^= pDataBuf[free_entry[i].offset + j];
-+ }
-+ }
-+
-+ if (!empty) {
-+ fdm_buf[free_entry[i - 1].offset + free_entry[i - 1].length] = checksum;
-+ }
-+
-+ pBuf32 = (u32 *) fdm_buf;
-+ for (i = 0; i < u4SecNum; ++i) {
-+ DRV_WriteReg32(NFI_FDM0L_REG32 + (i << 1), *pBuf32++);
-+ DRV_WriteReg32(NFI_FDM0M_REG32 + (i << 1), *pBuf32++);
-+ }
-+}
-+
-+static void
-+mtk_nand_stop_read(void)
-+{
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+ mtk_nand_reset();
-+ if (g_bHwEcc)
-+ ECC_Decode_End();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, 0);
-+}
-+
-+static void
-+mtk_nand_stop_write(void)
-+{
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ if (g_bHwEcc)
-+ ECC_Encode_End();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, 0);
-+}
-+
-+bool
-+mtk_nand_exec_read_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf)
-+{
-+ u8 *buf;
-+ bool bRet = true;
-+ struct nand_chip *nand = mtd->priv;
-+ u32 u4SecNum = u4PageSize >> 9;
-+
-+ if (((u32) pPageBuf % 16) && local_buffer_16_align)
-+ buf = local_buffer_16_align;
-+ else
-+ buf = pPageBuf;
-+ if (mtk_nand_ready_for_read(nand, u4RowAddr, 0, true, buf)) {
-+ int j;
-+ for (j = 0 ; j < u4SecNum; j++) {
-+ if (!mtk_nand_read_page_data(mtd, buf+j*512, 512))
-+ bRet = false;
-+ if(g_bHwEcc && !mtk_nand_check_dececc_done(j+1))
-+ bRet = false;
-+ if(g_bHwEcc && !mtk_nand_check_bch_error(mtd, buf+j*512, j, u4RowAddr))
-+ bRet = false;
-+ }
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ bRet = false;
-+
-+ mtk_nand_read_fdm_data(pFDMBuf, u4SecNum);
-+ mtk_nand_stop_read();
-+ }
-+
-+ if (buf == local_buffer_16_align)
-+ memcpy(pPageBuf, buf, u4PageSize);
-+
-+ return bRet;
-+}
-+
-+int
-+mtk_nand_exec_write_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ u32 u4SecNum = u4PageSize >> 9;
-+ u8 *buf;
-+ u8 status;
-+
-+ MSG(WRITE, "mtk_nand_exec_write_page, page: 0x%x\n", u4RowAddr);
-+
-+ if (((u32) pPageBuf % 16) && local_buffer_16_align) {
-+ printk(KERN_INFO "Data buffer not 16 bytes aligned: %p\n", pPageBuf);
-+ memcpy(local_buffer_16_align, pPageBuf, mtd->writesize);
-+ buf = local_buffer_16_align;
-+ } else
-+ buf = pPageBuf;
-+
-+ if (mtk_nand_ready_for_write(chip, u4RowAddr, 0, true, buf)) {
-+ mtk_nand_write_fdm_data(chip, pFDMBuf, u4SecNum);
-+ (void)mtk_nand_write_page_data(mtd, buf, u4PageSize);
-+ (void)mtk_nand_check_RW_count(u4PageSize);
-+ mtk_nand_stop_write();
-+ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY) ;
-+ }
-+
-+ status = chip->waitfunc(mtd, chip);
-+ if (status & NAND_STATUS_FAIL)
-+ return -EIO;
-+ return 0;
-+}
-+
-+static int
-+get_start_end_block(struct mtd_info *mtd, int block, int *start_blk, int *end_blk)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i;
-+
-+ *start_blk = 0;
-+ for (i = 0; i <= part_num; i++)
-+ {
-+ if (i == part_num)
-+ {
-+ // try the last reset partition
-+ *end_blk = (chip->chipsize >> chip->phys_erase_shift) - 1;
-+ if (*start_blk <= *end_blk)
-+ {
-+ if ((block >= *start_blk) && (block <= *end_blk))
-+ break;
-+ }
-+ }
-+ // skip All partition entry
-+ else if (g_pasStatic_Partition[i].size == MTDPART_SIZ_FULL)
-+ {
-+ continue;
-+ }
-+ *end_blk = *start_blk + (g_pasStatic_Partition[i].size >> chip->phys_erase_shift) - 1;
-+ if ((block >= *start_blk) && (block <= *end_blk))
-+ break;
-+ *start_blk = *end_blk + 1;
-+ }
-+ if (*start_blk > *end_blk)
-+ {
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static int
-+block_remap(struct mtd_info *mtd, int block)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int start_blk, end_blk;
-+ int j, block_offset;
-+ int bad_block = 0;
-+
-+ if (chip->bbt == NULL) {
-+ printk("ERROR!! no bbt table for block_remap\n");
-+ return -1;
-+ }
-+
-+ if (get_start_end_block(mtd, block, &start_blk, &end_blk) < 0) {
-+ printk("ERROR!! can not find start_blk and end_blk\n");
-+ return -1;
-+ }
-+
-+ block_offset = block - start_blk;
-+ for (j = start_blk; j <= end_blk;j++) {
-+ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) == 0x0) {
-+ if (!block_offset)
-+ break;
-+ block_offset--;
-+ } else {
-+ bad_block++;
-+ }
-+ }
-+ if (j <= end_blk) {
-+ return j;
-+ } else {
-+ // remap to the bad block
-+ for (j = end_blk; bad_block > 0; j--)
-+ {
-+ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) != 0x0)
-+ {
-+ bad_block--;
-+ if (bad_block <= block_offset)
-+ return j;
-+ }
-+ }
-+ }
-+
-+ printk("Error!! block_remap error\n");
-+ return -1;
-+}
-+
-+int
-+check_block_remap(struct mtd_info *mtd, int block)
-+{
-+ if (shift_on_bbt)
-+ return block_remap(mtd, block);
-+ else
-+ return block;
-+}
-+EXPORT_SYMBOL(check_block_remap);
-+
-+
-+static int
-+write_next_on_fail(struct mtd_info *mtd, char *write_buf, int page, int * to_blk)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i, j, to_page = 0, first_page;
-+ char *buf, *oob;
-+ int start_blk = 0, end_blk;
-+ int mapped_block;
-+ int page_per_block_bit = chip->phys_erase_shift - chip->page_shift;
-+ int block = page >> page_per_block_bit;
-+
-+ // find next available block in the same MTD partition
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+
-+ get_start_end_block(mtd, block, &start_blk, &end_blk);
-+
-+ buf = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL | GFP_DMA);
-+ if (buf == NULL)
-+ return -1;
-+
-+ oob = buf + mtd->writesize;
-+ for ((*to_blk) = block + 1; (*to_blk) <= end_blk ; (*to_blk)++) {
-+ if (nand_bbt_get(mtd, (*to_blk) << page_per_block_bit) == 0) {
-+ int status;
-+ status = mtk_nand_erase_hw(mtd, (*to_blk) << page_per_block_bit);
-+ if (status & NAND_STATUS_FAIL) {
-+ mtk_nand_block_markbad_hw(mtd, (*to_blk) << chip->phys_erase_shift);
-+ nand_bbt_set(mtd, (*to_blk) << page_per_block_bit, 0x3);
-+ } else {
-+ /* good block */
-+ to_page = (*to_blk) << page_per_block_bit;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!to_page) {
-+ kfree(buf);
-+ return -1;
-+ }
-+
-+ first_page = (page >> page_per_block_bit) << page_per_block_bit;
-+ for (i = 0; i < (1 << page_per_block_bit); i++) {
-+ if ((first_page + i) != page) {
-+ mtk_nand_read_oob_hw(mtd, chip, (first_page+i));
-+ for (j = 0; j < mtd->oobsize; j++)
-+ if (chip->oob_poi[j] != (unsigned char)0xff)
-+ break;
-+ if (j < mtd->oobsize) {
-+ mtk_nand_exec_read_page(mtd, (first_page+i), mtd->writesize, buf, oob);
-+ memset(oob, 0xff, mtd->oobsize);
-+ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)buf, oob) != 0) {
-+ int ret, new_blk = 0;
-+ nand_bbt_set(mtd, to_page, 0x3);
-+ ret = write_next_on_fail(mtd, buf, to_page + i, &new_blk);
-+ if (ret) {
-+ kfree(buf);
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ return ret;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ *to_blk = new_blk;
-+ to_page = ((*to_blk) << page_per_block_bit);
-+ }
-+ }
-+ } else {
-+ memset(chip->oob_poi, 0xff, mtd->oobsize);
-+ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)write_buf, chip->oob_poi) != 0) {
-+ int ret, new_blk = 0;
-+ nand_bbt_set(mtd, to_page, 0x3);
-+ ret = write_next_on_fail(mtd, write_buf, to_page + i, &new_blk);
-+ if (ret) {
-+ kfree(buf);
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ return ret;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift);
-+ *to_blk = new_blk;
-+ to_page = ((*to_blk) << page_per_block_bit);
-+ }
-+ }
-+ }
-+
-+ kfree(buf);
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offset,
-+ int data_len, const u8 * buf, int oob_required, int page, int cached, int raw)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ // write bad index into oob
-+ if (mapped_block != block)
-+ set_bad_index_to_oob(chip->oob_poi, block);
-+ else
-+ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ do {
-+ if (mtk_nand_exec_write_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, (u8 *)buf, chip->oob_poi)) {
-+ MSG(INIT, "write fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block);
-+#if defined(MTK_NAND_BMT)
-+ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift, UPDATE_WRITE_FAIL, (u8 *) buf, chip->oob_poi)) {
-+ MSG(INIT, "Update BMT success\n");
-+ return 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ return -EIO;
-+ }
-+#else
-+ {
-+ int new_blk;
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (write_next_on_fail(mtd, (char *)buf, page_in_block + mapped_block * page_per_block, &new_blk) != 0)
-+ {
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ return NAND_STATUS_FAIL;
-+ }
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ break;
-+ }
-+#endif
-+ } else
-+ break;
-+ } while(1);
-+
-+ return 0;
-+}
-+
-+static void
-+mtk_nand_command_bp(struct mtd_info *mtd, unsigned int command, int column, int page_addr)
-+{
-+ struct nand_chip *nand = mtd->priv;
-+
-+ switch (command) {
-+ case NAND_CMD_SEQIN:
-+ memset(g_kCMD.au1OOB, 0xFF, sizeof(g_kCMD.au1OOB));
-+ g_kCMD.pDataBuf = NULL;
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column;
-+ break;
-+
-+ case NAND_CMD_PAGEPROG:
-+ if (g_kCMD.pDataBuf || (0xFF != g_kCMD.au1OOB[nand_badblock_offset])) {
-+ u8 *pDataBuf = g_kCMD.pDataBuf ? g_kCMD.pDataBuf : nand->buffers->databuf;
-+ mtk_nand_exec_write_page(mtd, g_kCMD.u4RowAddr, mtd->writesize, pDataBuf, g_kCMD.au1OOB);
-+ g_kCMD.u4RowAddr = (u32) - 1;
-+ g_kCMD.u4OOBRowAddr = (u32) - 1;
-+ }
-+ break;
-+
-+ case NAND_CMD_READOOB:
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column + mtd->writesize;
-+ break;
-+
-+ case NAND_CMD_READ0:
-+ g_kCMD.u4RowAddr = page_addr;
-+ g_kCMD.u4ColAddr = column;
-+ break;
-+
-+ case NAND_CMD_ERASE1:
-+ nand->state=FL_ERASING;
-+ (void)mtk_nand_reset();
-+ mtk_nand_set_mode(CNFG_OP_ERASE);
-+ (void)mtk_nand_set_command(NAND_CMD_ERASE1);
-+ (void)mtk_nand_set_address(0, page_addr, 0, devinfo.addr_cycle - 2);
-+ break;
-+
-+ case NAND_CMD_ERASE2:
-+ (void)mtk_nand_set_command(NAND_CMD_ERASE2);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY)
-+ ;
-+ break;
-+
-+ case NAND_CMD_STATUS:
-+ (void)mtk_nand_reset();
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW);
-+ mtk_nand_set_mode(CNFG_OP_SRD);
-+ mtk_nand_set_mode(CNFG_READ_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ (void)mtk_nand_set_command(NAND_CMD_STATUS);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK);
-+ mb();
-+ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD | (1 << CON_NFI_NOB_SHIFT));
-+ g_bcmdstatus = true;
-+ break;
-+
-+ case NAND_CMD_RESET:
-+ (void)mtk_nand_reset();
-+ DRV_WriteReg16(NFI_INTR_EN_REG16, INTR_RST_DONE_EN);
-+ (void)mtk_nand_set_command(NAND_CMD_RESET);
-+ DRV_WriteReg16(NFI_BASE+0x44, 0xF1);
-+ while(!(DRV_Reg16(NFI_INTR_REG16)&INTR_RST_DONE_EN))
-+ ;
-+ break;
-+
-+ case NAND_CMD_READID:
-+ mtk_nand_reset();
-+ /* Disable HW ECC */
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN | CNFG_BYTE_RW);
-+ (void)mtk_nand_reset();
-+ mb();
-+ mtk_nand_set_mode(CNFG_OP_SRD);
-+ (void)mtk_nand_set_command(NAND_CMD_READID);
-+ (void)mtk_nand_set_address(0, 0, 1, 0);
-+ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_DATAR_STATE)
-+ ;
-+ break;
-+
-+ default:
-+ BUG();
-+ break;
-+ }
-+}
-+
-+static void
-+mtk_nand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ if ((chip == -1) && (false == g_bInitDone)) {
-+ struct nand_chip *nand = mtd->priv;
-+ struct mtk_nand_host *host = nand->priv;
-+ struct mtk_nand_host_hw *hw = host->hw;
-+ u32 spare_per_sector = mtd->oobsize / (mtd->writesize / 512);
-+ u32 ecc_bit = 4;
-+ u32 spare_bit = PAGEFMT_SPARE_16;
-+
-+ if (spare_per_sector >= 28) {
-+ spare_bit = PAGEFMT_SPARE_28;
-+ ecc_bit = 12;
-+ spare_per_sector = 28;
-+ } else if (spare_per_sector >= 27) {
-+ spare_bit = PAGEFMT_SPARE_27;
-+ ecc_bit = 8;
-+ spare_per_sector = 27;
-+ } else if (spare_per_sector >= 26) {
-+ spare_bit = PAGEFMT_SPARE_26;
-+ ecc_bit = 8;
-+ spare_per_sector = 26;
-+ } else if (spare_per_sector >= 16) {
-+ spare_bit = PAGEFMT_SPARE_16;
-+ ecc_bit = 4;
-+ spare_per_sector = 16;
-+ } else {
-+ MSG(INIT, "[NAND]: NFI not support oobsize: %x\n", spare_per_sector);
-+ ASSERT(0);
-+ }
-+ mtd->oobsize = spare_per_sector*(mtd->writesize/512);
-+ MSG(INIT, "[NAND]select ecc bit:%d, sparesize :%d spare_per_sector=%d\n",ecc_bit,mtd->oobsize,spare_per_sector);
-+ /* Setup PageFormat */
-+ if (4096 == mtd->writesize) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_4K);
-+ nand->cmdfunc = mtk_nand_command_bp;
-+ } else if (2048 == mtd->writesize) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_2K);
-+ nand->cmdfunc = mtk_nand_command_bp;
-+ }
-+ ECC_Config(hw,ecc_bit);
-+ g_bInitDone = true;
-+ }
-+ switch (chip) {
-+ case -1:
-+ break;
-+ case 0:
-+ case 1:
-+ /* Jun Shen, 2011.04.13 */
-+ /* Note: MT6577 EVB NAND is mounted on CS0, but FPGA is CS1 */
-+ DRV_WriteReg16(NFI_CSEL_REG16, chip);
-+ /* Jun Shen, 2011.04.13 */
-+ break;
-+ }
-+}
-+
-+static uint8_t
-+mtk_nand_read_byte(struct mtd_info *mtd)
-+{
-+ uint8_t retval = 0;
-+
-+ if (!mtk_nand_pio_ready()) {
-+ printk("pio ready timeout\n");
-+ retval = false;
-+ }
-+
-+ if (g_bcmdstatus) {
-+ retval = DRV_Reg8(NFI_DATAR_REG32);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK);
-+ mtk_nand_reset();
-+ if (g_bHwEcc) {
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ } else {
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ }
-+ g_bcmdstatus = false;
-+ } else
-+ retval = DRV_Reg8(NFI_DATAR_REG32);
-+
-+ return retval;
-+}
-+
-+static void
-+mtk_nand_read_buf(struct mtd_info *mtd, uint8_t * buf, int len)
-+{
-+ struct nand_chip *nand = (struct nand_chip *)mtd->priv;
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+
-+ if (u4ColAddr < u4PageSize) {
-+ if ((u4ColAddr == 0) && (len >= u4PageSize)) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, pkCMD->au1OOB);
-+ if (len > u4PageSize) {
-+ u32 u4Size = min(len - u4PageSize, sizeof(pkCMD->au1OOB));
-+ memcpy(buf + u4PageSize, pkCMD->au1OOB, u4Size);
-+ }
-+ } else {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB);
-+ memcpy(buf, nand->buffers->databuf + u4ColAddr, len);
-+ }
-+ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr;
-+ } else {
-+ u32 u4Offset = u4ColAddr - u4PageSize;
-+ u32 u4Size = min(len - u4Offset, sizeof(pkCMD->au1OOB));
-+ if (pkCMD->u4OOBRowAddr != pkCMD->u4RowAddr) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB);
-+ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr;
-+ }
-+ memcpy(buf, pkCMD->au1OOB + u4Offset, u4Size);
-+ }
-+ pkCMD->u4ColAddr += len;
-+}
-+
-+static void
-+mtk_nand_write_buf(struct mtd_info *mtd, const uint8_t * buf, int len)
-+{
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+ int i4Size, i;
-+
-+ if (u4ColAddr >= u4PageSize) {
-+ u32 u4Offset = u4ColAddr - u4PageSize;
-+ u8 *pOOB = pkCMD->au1OOB + u4Offset;
-+ i4Size = min(len, (int)(sizeof(pkCMD->au1OOB) - u4Offset));
-+ for (i = 0; i < i4Size; i++) {
-+ pOOB[i] &= buf[i];
-+ }
-+ } else {
-+ pkCMD->pDataBuf = (u8 *) buf;
-+ }
-+
-+ pkCMD->u4ColAddr += len;
-+}
-+
-+static int
-+mtk_nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t * buf, int oob_required)
-+{
-+ mtk_nand_write_buf(mtd, buf, mtd->writesize);
-+ mtk_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t * buf, int oob_required, int page)
-+{
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4ColAddr = pkCMD->u4ColAddr;
-+ u32 u4PageSize = mtd->writesize;
-+
-+ if (u4ColAddr == 0) {
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, chip->oob_poi);
-+ pkCMD->u4ColAddr += u4PageSize + mtd->oobsize;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, u8 * buf, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined (MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block,
-+ mtd->writesize, buf, chip->oob_poi))
-+ return 0;
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+
-+ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, buf, chip->oob_poi))
-+ return 0;
-+ else
-+ return -EIO;
-+#endif
-+}
-+
-+int
-+mtk_nand_erase_hw(struct mtd_info *mtd, int page)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+
-+ chip->erase_cmd(mtd, page);
-+
-+ return chip->waitfunc(mtd, chip);
-+}
-+
-+static int
-+mtk_nand_erase(struct mtd_info *mtd, int page)
-+{
-+ // get mapping
-+ struct nand_chip *chip = mtd->priv;
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int page_in_block = page % page_per_block;
-+ int block = page / page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+
-+ do {
-+ int status = mtk_nand_erase_hw(mtd, page_in_block + page_per_block * mapped_block);
-+
-+ if (status & NAND_STATUS_FAIL) {
-+#if defined (MTK_NAND_BMT)
-+ if (update_bmt( (page_in_block + mapped_block * page_per_block) << chip->page_shift,
-+ UPDATE_ERASE_FAIL, NULL, NULL))
-+ {
-+ MSG(INIT, "Erase fail at block: 0x%x, update BMT success\n", mapped_block);
-+ return 0;
-+ } else {
-+ MSG(INIT, "Erase fail at block: 0x%x, update BMT fail\n", mapped_block);
-+ return NAND_STATUS_FAIL;
-+ }
-+#else
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ } else
-+ return NAND_STATUS_FAIL;
-+#endif
-+ } else
-+ break;
-+ } while(1);
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_oob_raw(struct mtd_info *mtd, uint8_t * buf, int page_addr, int len)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ u32 col_addr = 0;
-+ u32 sector = 0;
-+ int res = 0;
-+ u32 colnob = 2, rawnob = devinfo.addr_cycle - 2;
-+ int randomread = 0;
-+ int read_len = 0;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) {
-+ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf);
-+ return -EINVAL;
-+ }
-+ if (len > spare_per_sector)
-+ randomread = 1;
-+ if (!randomread || !(devinfo.advancedmode & RAMDOM_READ)) {
-+ while (len > 0) {
-+ read_len = min(len, spare_per_sector);
-+ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector); // TODO: Fix this hard-code 16
-+ if (!mtk_nand_ready_for_read(chip, page_addr, col_addr, false, NULL)) {
-+ printk(KERN_WARNING "mtk_nand_ready_for_read return failed\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ mtk_nand_check_RW_count(read_len);
-+ mtk_nand_stop_read();
-+ sector++;
-+ len -= read_len;
-+ }
-+ } else {
-+ col_addr = NAND_SECTOR_SIZE;
-+ if (chip->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+ if (!mtk_nand_reset())
-+ goto error;
-+ mtk_nand_set_mode(0x6000);
-+ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN);
-+ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT);
-+
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB);
-+ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+
-+ mtk_nand_set_autoformat(false);
-+
-+ if (!mtk_nand_set_command(NAND_CMD_READ0))
-+ goto error;
-+ //1 FIXED ME: For Any Kind of AddrCycle
-+ if (!mtk_nand_set_address(col_addr, page_addr, colnob, rawnob))
-+ goto error;
-+ if (!mtk_nand_set_command(NAND_CMD_READSTART))
-+ goto error;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto error;
-+ read_len = min(len, spare_per_sector);
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ sector++;
-+ len -= read_len;
-+ mtk_nand_stop_read();
-+ while (len > 0) {
-+ read_len = min(len, spare_per_sector);
-+ if (!mtk_nand_set_command(0x05))
-+ goto error;
-+ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector);
-+ if (chip->options & NAND_BUSWIDTH_16)
-+ col_addr /= 2;
-+ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);
-+ DRV_WriteReg16(NFI_ADDRNOB_REG16, 2);
-+ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT);
-+ if (!mtk_nand_status_ready(STA_ADDR_STATE))
-+ goto error;
-+ if (!mtk_nand_set_command(0xE0))
-+ goto error;
-+ if (!mtk_nand_status_ready(STA_NAND_BUSY))
-+ goto error;
-+ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) {
-+ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n");
-+ res = -EIO;
-+ goto error;
-+ }
-+ mtk_nand_stop_read();
-+ sector++;
-+ len -= read_len;
-+ }
-+ }
-+error:
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD);
-+ return res;
-+}
-+
-+static int
-+mtk_nand_write_oob_raw(struct mtd_info *mtd, const uint8_t * buf, int page_addr, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ u32 col_addr = 0;
-+ u32 sector = 0;
-+ int write_len = 0;
-+ int status;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) {
-+ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf);
-+ return -EINVAL;
-+ }
-+
-+ while (len > 0) {
-+ write_len = min(len, spare_per_sector);
-+ col_addr = sector * (NAND_SECTOR_SIZE + spare_per_sector) + NAND_SECTOR_SIZE;
-+ if (!mtk_nand_ready_for_write(chip, page_addr, col_addr, false, NULL))
-+ return -EIO;
-+ if (!mtk_nand_mcu_write_data(mtd, buf + sector * spare_per_sector, write_len))
-+ return -EIO;
-+ (void)mtk_nand_check_RW_count(write_len);
-+ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR);
-+ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG);
-+ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY)
-+ ;
-+ status = chip->waitfunc(mtd, chip);
-+ if (status & NAND_STATUS_FAIL) {
-+ printk(KERN_INFO "status: %d\n", status);
-+ return -EIO;
-+ }
-+ len -= write_len;
-+ sector++;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_write_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int i, iter;
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize);
-+
-+ // copy ecc data
-+ for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
-+ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR);
-+ local_oob_buf[iter] = chip->oob_poi[chip->ecc.layout->eccpos[i]];
-+ }
-+
-+ // copy FDM data
-+ for (i = 0; i < sec_num; i++)
-+ memcpy(&local_oob_buf[i * spare_per_sector], &chip->oob_poi[i * OOB_AVAI_PER_SECTOR], OOB_AVAI_PER_SECTOR);
-+
-+ return mtk_nand_write_oob_raw(mtd, local_oob_buf, page, mtd->oobsize);
-+}
-+
-+static int mtk_nand_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ // write bad index into oob
-+ if (mapped_block != block)
-+ set_bad_index_to_oob(chip->oob_poi, block);
-+ else
-+ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX);
-+#else
-+ if (shift_on_bbt)
-+ {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ do {
-+ if (mtk_nand_write_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block /* page */)) {
-+ MSG(INIT, "write oob fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block);
-+#if defined(MTK_NAND_BMT)
-+ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift,
-+ UPDATE_WRITE_FAIL, NULL, chip->oob_poi))
-+ {
-+ MSG(INIT, "Update BMT success\n");
-+ return 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ return -EIO;
-+ }
-+#else
-+ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift);
-+ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3);
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, mapped_block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0)
-+ return NAND_STATUS_FAIL;
-+ } else {
-+ return NAND_STATUS_FAIL;
-+ }
-+#endif
-+ } else
-+ break;
-+ } while (1);
-+
-+ return 0;
-+}
-+
-+int
-+mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t offset)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int block = (int)offset >> chip->phys_erase_shift;
-+ int page = block * (1 << (chip->phys_erase_shift - chip->page_shift));
-+ u8 buf[8];
-+
-+ memset(buf, 0xFF, 8);
-+ buf[0] = 0;
-+ return mtk_nand_write_oob_raw(mtd, buf, page, 8);
-+}
-+
-+static int
-+mtk_nand_block_markbad(struct mtd_info *mtd, loff_t offset)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int block = (int)offset >> chip->phys_erase_shift;
-+ int ret;
-+ int mapped_block = block;
-+
-+ nand_get_device(chip, mtd, FL_WRITING);
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1) {
-+ printk("NAND mark bad failed\n");
-+ nand_release_device(mtd);
-+ return NAND_STATUS_FAIL;
-+ }
-+ }
-+ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#endif
-+ nand_release_device(mtd);
-+
-+ return ret;
-+}
-+
-+int
-+mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int i;
-+ u8 iter = 0;
-+
-+ int sec_num = 1<<(chip->page_shift-9);
-+ int spare_per_sector = mtd->oobsize/sec_num;
-+
-+ if (mtk_nand_read_oob_raw(mtd, chip->oob_poi, page, mtd->oobsize)) {
-+ printk(KERN_ERR "[%s]mtk_nand_read_oob_raw return failed\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ // adjust to ecc physical layout to memory layout
-+ /*********************************************************/
-+ /* FDM0 | ECC0 | FDM1 | ECC1 | FDM2 | ECC2 | FDM3 | ECC3 */
-+ /* 8B | 8B | 8B | 8B | 8B | 8B | 8B | 8B */
-+ /*********************************************************/
-+
-+ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize);
-+ // copy ecc data
-+ for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
-+ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR);
-+ chip->oob_poi[chip->ecc.layout->eccpos[i]] = local_oob_buf[iter];
-+ }
-+
-+ // copy FDM data
-+ for (i = 0; i < sec_num; i++) {
-+ memcpy(&chip->oob_poi[i * OOB_AVAI_PER_SECTOR], &local_oob_buf[i * spare_per_sector], OOB_AVAI_PER_SECTOR);
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
-+{
-+ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ int block = page / page_per_block;
-+ u16 page_in_block = page % page_per_block;
-+ int mapped_block = block;
-+
-+#if defined (MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+ mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1)
-+ return NAND_STATUS_FAIL;
-+ // allow to read oob even if the block is bad
-+ }
-+ if (mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block)!=0)
-+ return -1;
-+#endif
-+ return 0;
-+}
-+
-+int
-+mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ int page_addr = (int)(ofs >> chip->page_shift);
-+ unsigned int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
-+ unsigned char oob_buf[8];
-+
-+ page_addr &= ~(page_per_block - 1);
-+ if (mtk_nand_read_oob_raw(mtd, oob_buf, page_addr, sizeof(oob_buf))) {
-+ printk(KERN_WARNING "mtk_nand_read_oob_raw return error\n");
-+ return 1;
-+ }
-+
-+ if (oob_buf[0] != 0xff) {
-+ printk(KERN_WARNING "Bad block detected at 0x%x, oob_buf[0] is 0x%x\n", page_addr, oob_buf[0]);
-+ // dump_nfi();
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mtk_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+{
-+ int chipnr = 0;
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ int block = (int)ofs >> chip->phys_erase_shift;
-+ int mapped_block = block;
-+ int ret;
-+
-+ if (getchip) {
-+ chipnr = (int)(ofs >> chip->chip_shift);
-+ nand_get_device(chip, mtd, FL_READING);
-+ /* Select the NAND device */
-+ chip->select_chip(mtd, chipnr);
-+ }
-+
-+#if defined(MTK_NAND_BMT)
-+ mapped_block = get_mapping_block_index(block);
-+#else
-+ if (shift_on_bbt) {
-+ mapped_block = block_remap(mtd, block);
-+ if (mapped_block == -1) {
-+ if (getchip)
-+ nand_release_device(mtd);
-+ return NAND_STATUS_FAIL;
-+ }
-+ }
-+#endif
-+
-+ ret = mtk_nand_block_bad_hw(mtd, mapped_block << chip->phys_erase_shift);
-+#if defined (MTK_NAND_BMT)
-+ if (ret) {
-+ MSG(INIT, "Unmapped bad block: 0x%x\n", mapped_block);
-+ if (update_bmt(mapped_block << chip->phys_erase_shift, UPDATE_UNMAPPED_BLOCK, NULL, NULL)) {
-+ MSG(INIT, "Update BMT success\n");
-+ ret = 0;
-+ } else {
-+ MSG(INIT, "Update BMT fail\n");
-+ ret = 1;
-+ }
-+ }
-+#endif
-+
-+ if (getchip)
-+ nand_release_device(mtd);
-+
-+ return ret;
-+}
-+
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+char gacBuf[4096 + 288];
-+
-+static int
-+mtk_nand_verify_buf(struct mtd_info *mtd, const uint8_t * buf, int len)
-+{
-+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+ struct NAND_CMD *pkCMD = &g_kCMD;
-+ u32 u4PageSize = mtd->writesize;
-+ u32 *pSrc, *pDst;
-+ int i;
-+
-+ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, gacBuf, gacBuf + u4PageSize);
-+
-+ pSrc = (u32 *) buf;
-+ pDst = (u32 *) gacBuf;
-+ len = len / sizeof(u32);
-+ for (i = 0; i < len; ++i) {
-+ if (*pSrc != *pDst) {
-+ MSG(VERIFY, "mtk_nand_verify_buf page fail at page %d\n", pkCMD->u4RowAddr);
-+ return -1;
-+ }
-+ pSrc++;
-+ pDst++;
-+ }
-+
-+ pSrc = (u32 *) chip->oob_poi;
-+ pDst = (u32 *) (gacBuf + u4PageSize);
-+
-+ if ((pSrc[0] != pDst[0]) || (pSrc[1] != pDst[1]) || (pSrc[2] != pDst[2]) || (pSrc[3] != pDst[3]) || (pSrc[4] != pDst[4]) || (pSrc[5] != pDst[5])) {
-+ // TODO: Ask Designer Why?
-+ //(pSrc[6] != pDst[6]) || (pSrc[7] != pDst[7]))
-+ MSG(VERIFY, "mtk_nand_verify_buf oob fail at page %d\n", pkCMD->u4RowAddr);
-+ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pSrc[0], pSrc[1], pSrc[2], pSrc[3], pSrc[4], pSrc[5], pSrc[6], pSrc[7]);
-+ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pDst[0], pDst[1], pDst[2], pDst[3], pDst[4], pDst[5], pDst[6], pDst[7]);
-+ return -1;
-+ }
-+ return 0;
-+}
-+#endif
-+
-+static void
-+mtk_nand_init_hw(struct mtk_nand_host *host) {
-+ struct mtk_nand_host_hw *hw = host->hw;
-+ u32 data;
-+
-+ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60);
-+ data &= ~((0x3<<18)|(0x3<<16));
-+ data |= ((0x2<<18) |(0x2<<16));
-+ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data);
-+
-+ MSG(INIT, "Enable NFI Clock\n");
-+ nand_enable_clock();
-+
-+ g_bInitDone = false;
-+ g_kCMD.u4OOBRowAddr = (u32) - 1;
-+
-+ /* Set default NFI access timing control */
-+ DRV_WriteReg32(NFI_ACCCON_REG32, hw->nfi_access_timing);
-+ DRV_WriteReg16(NFI_CNFG_REG16, 0);
-+ DRV_WriteReg16(NFI_PAGEFMT_REG16, 0);
-+
-+ /* Reset the state machine and data FIFO, because flushing FIFO */
-+ (void)mtk_nand_reset();
-+
-+ /* Set the ECC engine */
-+ if (hw->nand_ecc_mode == NAND_ECC_HW) {
-+ MSG(INIT, "%s : Use HW ECC\n", MODULE_NAME);
-+ if (g_bHwEcc)
-+ NFI_SET_REG32(NFI_CNFG_REG16, CNFG_HW_ECC_EN);
-+ ECC_Config(host->hw,4);
-+ mtk_nand_configure_fdm(8);
-+ mtk_nand_configure_lock();
-+ }
-+
-+ NFI_SET_REG16(NFI_IOCON_REG16, 0x47);
-+}
-+
-+static int mtk_nand_dev_ready(struct mtd_info *mtd)
-+{
-+ return !(DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY);
-+}
-+
-+#define FACT_BBT_BLOCK_NUM 32 // use the latest 32 BLOCK for factory bbt table
-+#define FACT_BBT_OOB_SIGNATURE 1
-+#define FACT_BBT_SIGNATURE_LEN 7
-+const u8 oob_signature[] = "mtknand";
-+static u8 *fact_bbt = 0;
-+static u32 bbt_size = 0;
-+
-+static int
-+read_fact_bbt(struct mtd_info *mtd, unsigned int page)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+
-+ // read oob
-+ if (mtk_nand_read_oob_hw(mtd, chip, page)==0)
-+ {
-+ if (chip->oob_poi[nand_badblock_offset] != 0xFF)
-+ {
-+ printk("Bad Block on Page %x\n", page);
-+ return -1;
-+ }
-+ if (memcmp(&chip->oob_poi[FACT_BBT_OOB_SIGNATURE], oob_signature, FACT_BBT_SIGNATURE_LEN) != 0)
-+ {
-+ printk("compare signature failed %x\n", page);
-+ return -1;
-+ }
-+ if (mtk_nand_exec_read_page(mtd, page, mtd->writesize, chip->buffers->databuf, chip->oob_poi))
-+ {
-+ printk("Signature matched and data read!\n");
-+ memcpy(fact_bbt, chip->buffers->databuf, (bbt_size <= mtd->writesize)? bbt_size:mtd->writesize);
-+ return 0;
-+ }
-+
-+ }
-+ printk("failed at page %x\n", page);
-+ return -1;
-+}
-+
-+static int
-+load_fact_bbt(struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ int i;
-+ u32 total_block;
-+
-+ total_block = 1 << (chip->chip_shift - chip->phys_erase_shift);
-+ bbt_size = total_block >> 2;
-+
-+ if ((!fact_bbt) && (bbt_size))
-+ fact_bbt = (u8 *)kmalloc(bbt_size, GFP_KERNEL);
-+ if (!fact_bbt)
-+ return -1;
-+
-+ for (i = total_block - 1; i >= (total_block - FACT_BBT_BLOCK_NUM); i--)
-+ {
-+ if (read_fact_bbt(mtd, i << (chip->phys_erase_shift - chip->page_shift)) == 0)
-+ {
-+ printk("load_fact_bbt success %d\n", i);
-+ return 0;
-+ }
-+
-+ }
-+ printk("load_fact_bbt failed\n");
-+ return -1;
-+}
-+
-+static int
-+mtk_nand_probe(struct platform_device *pdev)
-+{
-+ struct mtd_part_parser_data ppdata;
-+ struct mtk_nand_host_hw *hw;
-+ struct mtd_info *mtd;
-+ struct nand_chip *nand_chip;
-+ u8 ext_id1, ext_id2, ext_id3;
-+ int err = 0;
-+ int id;
-+ u32 ext_id;
-+ int i;
-+ u32 data;
-+
-+ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60);
-+ data &= ~((0x3<<18)|(0x3<<16));
-+ data |= ((0x2<<18) |(0x2<<16));
-+ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data);
-+
-+ hw = &mt7621_nand_hw,
-+ BUG_ON(!hw);
-+ /* Allocate memory for the device structure (and zero it) */
-+ host = kzalloc(sizeof(struct mtk_nand_host), GFP_KERNEL);
-+ if (!host) {
-+ MSG(INIT, "mtk_nand: failed to allocate device structure.\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* Allocate memory for 16 byte aligned buffer */
-+ local_buffer_16_align = local_buffer + 16 - ((u32) local_buffer % 16);
-+ printk(KERN_INFO "Allocate 16 byte aligned buffer: %p\n", local_buffer_16_align);
-+ host->hw = hw;
-+
-+ /* init mtd data structure */
-+ nand_chip = &host->nand_chip;
-+ nand_chip->priv = host; /* link the private data structures */
-+
-+ mtd = &host->mtd;
-+ mtd->priv = nand_chip;
-+ mtd->owner = THIS_MODULE;
-+ mtd->name = "MT7621-NAND";
-+
-+ hw->nand_ecc_mode = NAND_ECC_HW;
-+
-+ /* Set address of NAND IO lines */
-+ nand_chip->IO_ADDR_R = (void __iomem *)NFI_DATAR_REG32;
-+ nand_chip->IO_ADDR_W = (void __iomem *)NFI_DATAW_REG32;
-+ nand_chip->chip_delay = 20; /* 20us command delay time */
-+ nand_chip->ecc.mode = hw->nand_ecc_mode; /* enable ECC */
-+ nand_chip->ecc.strength = 1;
-+ nand_chip->read_byte = mtk_nand_read_byte;
-+ nand_chip->read_buf = mtk_nand_read_buf;
-+ nand_chip->write_buf = mtk_nand_write_buf;
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+ nand_chip->verify_buf = mtk_nand_verify_buf;
-+#endif
-+ nand_chip->select_chip = mtk_nand_select_chip;
-+ nand_chip->dev_ready = mtk_nand_dev_ready;
-+ nand_chip->cmdfunc = mtk_nand_command_bp;
-+ nand_chip->ecc.read_page = mtk_nand_read_page_hwecc;
-+ nand_chip->ecc.write_page = mtk_nand_write_page_hwecc;
-+
-+ nand_chip->ecc.layout = &nand_oob_64;
-+ nand_chip->ecc.size = hw->nand_ecc_size; //2048
-+ nand_chip->ecc.bytes = hw->nand_ecc_bytes; //32
-+
-+ // For BMT, we need to revise driver architecture
-+ nand_chip->write_page = mtk_nand_write_page;
-+ nand_chip->ecc.write_oob = mtk_nand_write_oob;
-+ nand_chip->block_markbad = mtk_nand_block_markbad; // need to add nand_get_device()/nand_release_device().
-+ // nand_chip->erase = mtk_nand_erase;
-+ // nand_chip->read_page = mtk_nand_read_page;
-+ nand_chip->ecc.read_oob = mtk_nand_read_oob;
-+ nand_chip->block_bad = mtk_nand_block_bad;
-+
-+ //Qwert:Add for Uboot
-+ mtk_nand_init_hw(host);
-+ /* Select the device */
-+ nand_chip->select_chip(mtd, NFI_DEFAULT_CS);
-+
-+ /*
-+ * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
-+ * after power-up
-+ */
-+ nand_chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+
-+ memset(&devinfo, 0 , sizeof(flashdev_info));
-+
-+ /* Send the command for reading device ID */
-+
-+ nand_chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
-+
-+ /* Read manufacturer and device IDs */
-+ manu_id = nand_chip->read_byte(mtd);
-+ dev_id = nand_chip->read_byte(mtd);
-+ id = dev_id | (manu_id << 8);
-+ ext_id1 = nand_chip->read_byte(mtd);
-+ ext_id2 = nand_chip->read_byte(mtd);
-+ ext_id3 = nand_chip->read_byte(mtd);
-+ ext_id = ext_id1 << 16 | ext_id2 << 8 | ext_id3;
-+ if (!get_device_info(id, ext_id, &devinfo)) {
-+ u32 chip_mode = RALINK_REG(RALINK_SYSCTL_BASE+0x010)&0x0F;
-+ MSG(INIT, "Not Support this Device! \r\n");
-+ memset(&devinfo, 0 , sizeof(flashdev_info));
-+ MSG(INIT, "chip_mode=%08X\n",chip_mode);
-+
-+ /* apply bootstrap first */
-+ devinfo.addr_cycle = 5;
-+ devinfo.iowidth = 8;
-+
-+ switch (chip_mode) {
-+ case 10:
-+ devinfo.pagesize = 2048;
-+ devinfo.sparesize = 128;
-+ devinfo.totalsize = 128;
-+ devinfo.blocksize = 128;
-+ break;
-+ case 11:
-+ devinfo.pagesize = 4096;
-+ devinfo.sparesize = 128;
-+ devinfo.totalsize = 1024;
-+ devinfo.blocksize = 256;
-+ break;
-+ case 12:
-+ devinfo.pagesize = 4096;
-+ devinfo.sparesize = 224;
-+ devinfo.totalsize = 2048;
-+ devinfo.blocksize = 512;
-+ break;
-+ default:
-+ case 1:
-+ devinfo.pagesize = 2048;
-+ devinfo.sparesize = 64;
-+ devinfo.totalsize = 128;
-+ devinfo.blocksize = 128;
-+ break;
-+ }
-+
-+ devinfo.timmingsetting = NFI_DEFAULT_ACCESS_TIMING;
-+ devinfo.devciename[0] = 'U';
-+ devinfo.advancedmode = 0;
-+ }
-+ mtd->writesize = devinfo.pagesize;
-+ mtd->erasesize = (devinfo.blocksize<<10);
-+ mtd->oobsize = devinfo.sparesize;
-+
-+ nand_chip->chipsize = (devinfo.totalsize<<20);
-+ nand_chip->page_shift = ffs(mtd->writesize) - 1;
-+ nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1;
-+ nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
-+ nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1;
-+ nand_chip->oob_poi = nand_chip->buffers->databuf + mtd->writesize;
-+ nand_chip->badblockpos = 0;
-+
-+ if (devinfo.pagesize == 4096)
-+ nand_chip->ecc.layout = &nand_oob_128;
-+ else if (devinfo.pagesize == 2048)
-+ nand_chip->ecc.layout = &nand_oob_64;
-+ else if (devinfo.pagesize == 512)
-+ nand_chip->ecc.layout = &nand_oob_16;
-+
-+ nand_chip->ecc.layout->eccbytes = devinfo.sparesize-OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE);
-+ for (i = 0; i < nand_chip->ecc.layout->eccbytes; i++)
-+ nand_chip->ecc.layout->eccpos[i]=OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE)+i;
-+
-+ MSG(INIT, "Support this Device in MTK table! %x \r\n", id);
-+ hw->nfi_bus_width = devinfo.iowidth;
-+ DRV_WriteReg32(NFI_ACCCON_REG32, devinfo.timmingsetting);
-+
-+ /* 16-bit bus width */
-+ if (hw->nfi_bus_width == 16) {
-+ MSG(INIT, "%s : Set the 16-bit I/O settings!\n", MODULE_NAME);
-+ nand_chip->options |= NAND_BUSWIDTH_16;
-+ }
-+ mtd->oobsize = devinfo.sparesize;
-+ hw->nfi_cs_num = 1;
-+
-+ /* Scan to find existance of the device */
-+ if (nand_scan(mtd, hw->nfi_cs_num)) {
-+ MSG(INIT, "%s : nand_scan fail.\n", MODULE_NAME);
-+ err = -ENXIO;
-+ goto out;
-+ }
-+
-+ g_page_size = mtd->writesize;
-+ platform_set_drvdata(pdev, host);
-+ if (hw->nfi_bus_width == 16) {
-+ NFI_SET_REG16(NFI_PAGEFMT_REG16, PAGEFMT_DBYTE_EN);
-+ }
-+
-+ nand_chip->select_chip(mtd, 0);
-+#if defined(MTK_NAND_BMT)
-+ nand_chip->chipsize -= (BMT_POOL_SIZE) << nand_chip->phys_erase_shift;
-+#endif
-+ mtd->size = nand_chip->chipsize;
-+
-+ CFG_BLOCKSIZE = mtd->erasesize;
-+
-+#if defined(MTK_NAND_BMT)
-+ if (!g_bmt) {
-+ if (!(g_bmt = init_bmt(nand_chip, BMT_POOL_SIZE))) {
-+ MSG(INIT, "Error: init bmt failed\n");
-+ return 0;
-+ }
-+ }
-+#endif
-+
-+ ppdata.of_node = pdev->dev.of_node;
-+ err = mtd_device_parse_register(mtd, probe_types, &ppdata,
-+ NULL, 0);
-+ if (!err) {
-+ MSG(INIT, "[mtk_nand] probe successfully!\n");
-+ nand_disable_clock();
-+ shift_on_bbt = 1;
-+ if (load_fact_bbt(mtd) == 0) {
-+ int i;
-+ for (i = 0; i < 0x100; i++)
-+ nand_chip->bbt[i] |= fact_bbt[i];
-+ }
-+
-+ return err;
-+ }
-+
-+out:
-+ MSG(INIT, "[NFI] mtk_nand_probe fail, err = %d!\n", err);
-+ nand_release(mtd);
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(host);
-+ nand_disable_clock();
-+ return err;
-+}
-+
-+static int
-+mtk_nand_remove(struct platform_device *pdev)
-+{
-+ struct mtk_nand_host *host = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = &host->mtd;
-+
-+ nand_release(mtd);
-+ kfree(host);
-+ nand_disable_clock();
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7621_nand_match[] = {
-+ { .compatible = "mtk,mt7621-nand" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7621_nand_match);
-+
-+static struct platform_driver mtk_nand_driver = {
-+ .probe = mtk_nand_probe,
-+ .remove = mtk_nand_remove,
-+ .driver = {
-+ .name = "MT7621-NAND",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7621_nand_match,
-+ },
-+};
-+
-+static int __init
-+mtk_nand_init(void)
-+{
-+ printk("MediaTek Nand driver init, version %s\n", VERSION);
-+
-+ return platform_driver_register(&mtk_nand_driver);
-+}
-+
-+static void __exit
-+mtk_nand_exit(void)
-+{
-+ platform_driver_unregister(&mtk_nand_driver);
-+}
-+
-+module_init(mtk_nand_init);
-+module_exit(mtk_nand_exit);
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/nand/mtk_nand.h
-@@ -0,0 +1,452 @@
-+#ifndef __MTK_NAND_H
-+#define __MTK_NAND_H
-+
-+#define RALINK_NAND_CTRL_BASE 0xBE003000
-+#define RALINK_SYSCTL_BASE 0xBE000000
-+#define RALINK_NANDECC_CTRL_BASE 0xBE003800
-+/*******************************************************************************
-+ * NFI Register Definition
-+ *******************************************************************************/
-+
-+#define NFI_CNFG_REG16 ((volatile P_U16)(NFI_BASE+0x0000))
-+#define NFI_PAGEFMT_REG16 ((volatile P_U16)(NFI_BASE+0x0004))
-+#define NFI_CON_REG16 ((volatile P_U16)(NFI_BASE+0x0008))
-+#define NFI_ACCCON_REG32 ((volatile P_U32)(NFI_BASE+0x000C))
-+#define NFI_INTR_EN_REG16 ((volatile P_U16)(NFI_BASE+0x0010))
-+#define NFI_INTR_REG16 ((volatile P_U16)(NFI_BASE+0x0014))
-+
-+#define NFI_CMD_REG16 ((volatile P_U16)(NFI_BASE+0x0020))
-+
-+#define NFI_ADDRNOB_REG16 ((volatile P_U16)(NFI_BASE+0x0030))
-+#define NFI_COLADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0034))
-+#define NFI_ROWADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0038))
-+
-+#define NFI_STRDATA_REG16 ((volatile P_U16)(NFI_BASE+0x0040))
-+
-+#define NFI_DATAW_REG32 ((volatile P_U32)(NFI_BASE+0x0050))
-+#define NFI_DATAR_REG32 ((volatile P_U32)(NFI_BASE+0x0054))
-+#define NFI_PIO_DIRDY_REG16 ((volatile P_U16)(NFI_BASE+0x0058))
-+
-+#define NFI_STA_REG32 ((volatile P_U32)(NFI_BASE+0x0060))
-+#define NFI_FIFOSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0064))
-+#define NFI_LOCKSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0068))
-+
-+#define NFI_ADDRCNTR_REG16 ((volatile P_U16)(NFI_BASE+0x0070))
-+
-+#define NFI_STRADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0080))
-+#define NFI_BYTELEN_REG16 ((volatile P_U16)(NFI_BASE+0x0084))
-+
-+#define NFI_CSEL_REG16 ((volatile P_U16)(NFI_BASE+0x0090))
-+#define NFI_IOCON_REG16 ((volatile P_U16)(NFI_BASE+0x0094))
-+
-+#define NFI_FDM0L_REG32 ((volatile P_U32)(NFI_BASE+0x00A0))
-+#define NFI_FDM0M_REG32 ((volatile P_U32)(NFI_BASE+0x00A4))
-+
-+#define NFI_LOCK_REG16 ((volatile P_U16)(NFI_BASE+0x0100))
-+#define NFI_LOCKCON_REG32 ((volatile P_U32)(NFI_BASE+0x0104))
-+#define NFI_LOCKANOB_REG16 ((volatile P_U16)(NFI_BASE+0x0108))
-+#define NFI_LOCK00ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0110))
-+#define NFI_LOCK00FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0114))
-+#define NFI_LOCK01ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0118))
-+#define NFI_LOCK01FMT_REG32 ((volatile P_U32)(NFI_BASE+0x011C))
-+#define NFI_LOCK02ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0120))
-+#define NFI_LOCK02FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0124))
-+#define NFI_LOCK03ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0128))
-+#define NFI_LOCK03FMT_REG32 ((volatile P_U32)(NFI_BASE+0x012C))
-+#define NFI_LOCK04ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0130))
-+#define NFI_LOCK04FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0134))
-+#define NFI_LOCK05ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0138))
-+#define NFI_LOCK05FMT_REG32 ((volatile P_U32)(NFI_BASE+0x013C))
-+#define NFI_LOCK06ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0140))
-+#define NFI_LOCK06FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0144))
-+#define NFI_LOCK07ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0148))
-+#define NFI_LOCK07FMT_REG32 ((volatile P_U32)(NFI_BASE+0x014C))
-+#define NFI_LOCK08ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0150))
-+#define NFI_LOCK08FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0154))
-+#define NFI_LOCK09ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0158))
-+#define NFI_LOCK09FMT_REG32 ((volatile P_U32)(NFI_BASE+0x015C))
-+#define NFI_LOCK10ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0160))
-+#define NFI_LOCK10FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0164))
-+#define NFI_LOCK11ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0168))
-+#define NFI_LOCK11FMT_REG32 ((volatile P_U32)(NFI_BASE+0x016C))
-+#define NFI_LOCK12ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0170))
-+#define NFI_LOCK12FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0174))
-+#define NFI_LOCK13ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0178))
-+#define NFI_LOCK13FMT_REG32 ((volatile P_U32)(NFI_BASE+0x017C))
-+#define NFI_LOCK14ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0180))
-+#define NFI_LOCK14FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0184))
-+#define NFI_LOCK15ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0188))
-+#define NFI_LOCK15FMT_REG32 ((volatile P_U32)(NFI_BASE+0x018C))
-+
-+#define NFI_FIFODATA0_REG32 ((volatile P_U32)(NFI_BASE+0x0190))
-+#define NFI_FIFODATA1_REG32 ((volatile P_U32)(NFI_BASE+0x0194))
-+#define NFI_FIFODATA2_REG32 ((volatile P_U32)(NFI_BASE+0x0198))
-+#define NFI_FIFODATA3_REG32 ((volatile P_U32)(NFI_BASE+0x019C))
-+#define NFI_MASTERSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0210))
-+
-+
-+/*******************************************************************************
-+ * NFI Register Field Definition
-+ *******************************************************************************/
-+
-+/* NFI_CNFG */
-+#define CNFG_AHB (0x0001)
-+#define CNFG_READ_EN (0x0002)
-+#define CNFG_DMA_BURST_EN (0x0004)
-+#define CNFG_BYTE_RW (0x0040)
-+#define CNFG_HW_ECC_EN (0x0100)
-+#define CNFG_AUTO_FMT_EN (0x0200)
-+#define CNFG_OP_IDLE (0x0000)
-+#define CNFG_OP_READ (0x1000)
-+#define CNFG_OP_SRD (0x2000)
-+#define CNFG_OP_PRGM (0x3000)
-+#define CNFG_OP_ERASE (0x4000)
-+#define CNFG_OP_RESET (0x5000)
-+#define CNFG_OP_CUST (0x6000)
-+#define CNFG_OP_MODE_MASK (0x7000)
-+#define CNFG_OP_MODE_SHIFT (12)
-+
-+/* NFI_PAGEFMT */
-+#define PAGEFMT_512 (0x0000)
-+#define PAGEFMT_2K (0x0001)
-+#define PAGEFMT_4K (0x0002)
-+
-+#define PAGEFMT_PAGE_MASK (0x0003)
-+
-+#define PAGEFMT_DBYTE_EN (0x0008)
-+
-+#define PAGEFMT_SPARE_16 (0x0000)
-+#define PAGEFMT_SPARE_26 (0x0001)
-+#define PAGEFMT_SPARE_27 (0x0002)
-+#define PAGEFMT_SPARE_28 (0x0003)
-+#define PAGEFMT_SPARE_MASK (0x0030)
-+#define PAGEFMT_SPARE_SHIFT (4)
-+
-+#define PAGEFMT_FDM_MASK (0x0F00)
-+#define PAGEFMT_FDM_SHIFT (8)
-+
-+#define PAGEFMT_FDM_ECC_MASK (0xF000)
-+#define PAGEFMT_FDM_ECC_SHIFT (12)
-+
-+/* NFI_CON */
-+#define CON_FIFO_FLUSH (0x0001)
-+#define CON_NFI_RST (0x0002)
-+#define CON_NFI_SRD (0x0010)
-+
-+#define CON_NFI_NOB_MASK (0x0060)
-+#define CON_NFI_NOB_SHIFT (5)
-+
-+#define CON_NFI_BRD (0x0100)
-+#define CON_NFI_BWR (0x0200)
-+
-+#define CON_NFI_SEC_MASK (0xF000)
-+#define CON_NFI_SEC_SHIFT (12)
-+
-+/* NFI_ACCCON */
-+#define ACCCON_SETTING ()
-+
-+/* NFI_INTR_EN */
-+#define INTR_RD_DONE_EN (0x0001)
-+#define INTR_WR_DONE_EN (0x0002)
-+#define INTR_RST_DONE_EN (0x0004)
-+#define INTR_ERASE_DONE_EN (0x0008)
-+#define INTR_BSY_RTN_EN (0x0010)
-+#define INTR_ACC_LOCK_EN (0x0020)
-+#define INTR_AHB_DONE_EN (0x0040)
-+#define INTR_ALL_INTR_DE (0x0000)
-+#define INTR_ALL_INTR_EN (0x007F)
-+
-+/* NFI_INTR */
-+#define INTR_RD_DONE (0x0001)
-+#define INTR_WR_DONE (0x0002)
-+#define INTR_RST_DONE (0x0004)
-+#define INTR_ERASE_DONE (0x0008)
-+#define INTR_BSY_RTN (0x0010)
-+#define INTR_ACC_LOCK (0x0020)
-+#define INTR_AHB_DONE (0x0040)
-+
-+/* NFI_ADDRNOB */
-+#define ADDR_COL_NOB_MASK (0x0003)
-+#define ADDR_COL_NOB_SHIFT (0)
-+#define ADDR_ROW_NOB_MASK (0x0030)
-+#define ADDR_ROW_NOB_SHIFT (4)
-+
-+/* NFI_STA */
-+#define STA_READ_EMPTY (0x00001000)
-+#define STA_ACC_LOCK (0x00000010)
-+#define STA_CMD_STATE (0x00000001)
-+#define STA_ADDR_STATE (0x00000002)
-+#define STA_DATAR_STATE (0x00000004)
-+#define STA_DATAW_STATE (0x00000008)
-+
-+#define STA_NAND_FSM_MASK (0x1F000000)
-+#define STA_NAND_BUSY (0x00000100)
-+#define STA_NAND_BUSY_RETURN (0x00000200)
-+#define STA_NFI_FSM_MASK (0x000F0000)
-+#define STA_NFI_OP_MASK (0x0000000F)
-+
-+/* NFI_FIFOSTA */
-+#define FIFO_RD_EMPTY (0x0040)
-+#define FIFO_RD_FULL (0x0080)
-+#define FIFO_WR_FULL (0x8000)
-+#define FIFO_WR_EMPTY (0x4000)
-+#define FIFO_RD_REMAIN(x) (0x1F&(x))
-+#define FIFO_WR_REMAIN(x) ((0x1F00&(x))>>8)
-+
-+/* NFI_ADDRCNTR */
-+#define ADDRCNTR_CNTR(x) ((0xF000&(x))>>12)
-+#define ADDRCNTR_OFFSET(x) (0x03FF&(x))
-+
-+/* NFI_LOCK */
-+#define NFI_LOCK_ON (0x0001)
-+
-+/* NFI_LOCKANOB */
-+#define PROG_RADD_NOB_MASK (0x7000)
-+#define PROG_RADD_NOB_SHIFT (12)
-+#define PROG_CADD_NOB_MASK (0x0300)
-+#define PROG_CADD_NOB_SHIFT (8)
-+#define ERASE_RADD_NOB_MASK (0x0070)
-+#define ERASE_RADD_NOB_SHIFT (4)
-+#define ERASE_CADD_NOB_MASK (0x0007)
-+#define ERASE_CADD_NOB_SHIFT (0)
-+
-+/*******************************************************************************
-+ * ECC Register Definition
-+ *******************************************************************************/
-+
-+#define ECC_ENCCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0000))
-+#define ECC_ENCCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0004))
-+#define ECC_ENCDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0008))
-+#define ECC_ENCIDLE_REG32 ((volatile P_U32)(NFIECC_BASE+0x000C))
-+#define ECC_ENCPAR0_REG32 ((volatile P_U32)(NFIECC_BASE+0x0010))
-+#define ECC_ENCPAR1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0014))
-+#define ECC_ENCPAR2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0018))
-+#define ECC_ENCPAR3_REG32 ((volatile P_U32)(NFIECC_BASE+0x001C))
-+#define ECC_ENCPAR4_REG32 ((volatile P_U32)(NFIECC_BASE+0x0020))
-+#define ECC_ENCSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0024))
-+#define ECC_ENCIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0028))
-+#define ECC_ENCIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x002C))
-+
-+#define ECC_DECCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0100))
-+#define ECC_DECCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0104))
-+#define ECC_DECDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0108))
-+#define ECC_DECIDLE_REG16 ((volatile P_U16)(NFIECC_BASE+0x010C))
-+#define ECC_DECFER_REG16 ((volatile P_U16)(NFIECC_BASE+0x0110))
-+#define ECC_DECENUM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0114))
-+#define ECC_DECDONE_REG16 ((volatile P_U16)(NFIECC_BASE+0x0118))
-+#define ECC_DECEL0_REG32 ((volatile P_U32)(NFIECC_BASE+0x011C))
-+#define ECC_DECEL1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0120))
-+#define ECC_DECEL2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0124))
-+#define ECC_DECEL3_REG32 ((volatile P_U32)(NFIECC_BASE+0x0128))
-+#define ECC_DECEL4_REG32 ((volatile P_U32)(NFIECC_BASE+0x012C))
-+#define ECC_DECEL5_REG32 ((volatile P_U32)(NFIECC_BASE+0x0130))
-+#define ECC_DECIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0134))
-+#define ECC_DECIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x0138))
-+#define ECC_FDMADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x013C))
-+#define ECC_DECFSM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0140))
-+#define ECC_SYNSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0144))
-+#define ECC_DECNFIDI_REG32 ((volatile P_U32)(NFIECC_BASE+0x0148))
-+#define ECC_SYN0_REG32 ((volatile P_U32)(NFIECC_BASE+0x014C))
-+
-+/*******************************************************************************
-+ * ECC register definition
-+ *******************************************************************************/
-+/* ECC_ENCON */
-+#define ENC_EN (0x0001)
-+#define ENC_DE (0x0000)
-+
-+/* ECC_ENCCNFG */
-+#define ECC_CNFG_ECC4 (0x0000)
-+#define ECC_CNFG_ECC6 (0x0001)
-+#define ECC_CNFG_ECC8 (0x0002)
-+#define ECC_CNFG_ECC10 (0x0003)
-+#define ECC_CNFG_ECC12 (0x0004)
-+#define ECC_CNFG_ECC_MASK (0x00000007)
-+
-+#define ENC_CNFG_NFI (0x0010)
-+#define ENC_CNFG_MODE_MASK (0x0010)
-+
-+#define ENC_CNFG_META6 (0x10300000)
-+#define ENC_CNFG_META8 (0x10400000)
-+
-+#define ENC_CNFG_MSG_MASK (0x1FFF0000)
-+#define ENC_CNFG_MSG_SHIFT (0x10)
-+
-+/* ECC_ENCIDLE */
-+#define ENC_IDLE (0x0001)
-+
-+/* ECC_ENCSTA */
-+#define STA_FSM (0x001F)
-+#define STA_COUNT_PS (0xFF10)
-+#define STA_COUNT_MS (0x3FFF0000)
-+
-+/* ECC_ENCIRQEN */
-+#define ENC_IRQEN (0x0001)
-+
-+/* ECC_ENCIRQSTA */
-+#define ENC_IRQSTA (0x0001)
-+
-+/* ECC_DECCON */
-+#define DEC_EN (0x0001)
-+#define DEC_DE (0x0000)
-+
-+/* ECC_ENCCNFG */
-+#define DEC_CNFG_ECC4 (0x0000)
-+//#define DEC_CNFG_ECC6 (0x0001)
-+//#define DEC_CNFG_ECC12 (0x0002)
-+#define DEC_CNFG_NFI (0x0010)
-+//#define DEC_CNFG_META6 (0x10300000)
-+//#define DEC_CNFG_META8 (0x10400000)
-+
-+#define DEC_CNFG_FER (0x01000)
-+#define DEC_CNFG_EL (0x02000)
-+#define DEC_CNFG_CORRECT (0x03000)
-+#define DEC_CNFG_TYPE_MASK (0x03000)
-+
-+#define DEC_CNFG_EMPTY_EN (0x80000000)
-+
-+#define DEC_CNFG_CODE_MASK (0x1FFF0000)
-+#define DEC_CNFG_CODE_SHIFT (0x10)
-+
-+/* ECC_DECIDLE */
-+#define DEC_IDLE (0x0001)
-+
-+/* ECC_DECFER */
-+#define DEC_FER0 (0x0001)
-+#define DEC_FER1 (0x0002)
-+#define DEC_FER2 (0x0004)
-+#define DEC_FER3 (0x0008)
-+#define DEC_FER4 (0x0010)
-+#define DEC_FER5 (0x0020)
-+#define DEC_FER6 (0x0040)
-+#define DEC_FER7 (0x0080)
-+
-+/* ECC_DECENUM */
-+#define ERR_NUM0 (0x0000000F)
-+#define ERR_NUM1 (0x000000F0)
-+#define ERR_NUM2 (0x00000F00)
-+#define ERR_NUM3 (0x0000F000)
-+#define ERR_NUM4 (0x000F0000)
-+#define ERR_NUM5 (0x00F00000)
-+#define ERR_NUM6 (0x0F000000)
-+#define ERR_NUM7 (0xF0000000)
-+
-+/* ECC_DECDONE */
-+#define DEC_DONE0 (0x0001)
-+#define DEC_DONE1 (0x0002)
-+#define DEC_DONE2 (0x0004)
-+#define DEC_DONE3 (0x0008)
-+#define DEC_DONE4 (0x0010)
-+#define DEC_DONE5 (0x0020)
-+#define DEC_DONE6 (0x0040)
-+#define DEC_DONE7 (0x0080)
-+
-+/* ECC_DECIRQEN */
-+#define DEC_IRQEN (0x0001)
-+
-+/* ECC_DECIRQSTA */
-+#define DEC_IRQSTA (0x0001)
-+
-+#define CHIPVER_ECO_1 (0x8a00)
-+#define CHIPVER_ECO_2 (0x8a01)
-+
-+//#define NAND_PFM
-+
-+/*******************************************************************************
-+ * Data Structure Definition
-+ *******************************************************************************/
-+struct mtk_nand_host
-+{
-+ struct nand_chip nand_chip;
-+ struct mtd_info mtd;
-+ struct mtk_nand_host_hw *hw;
-+};
-+
-+struct NAND_CMD
-+{
-+ u32 u4ColAddr;
-+ u32 u4RowAddr;
-+ u32 u4OOBRowAddr;
-+ u8 au1OOB[288];
-+ u8* pDataBuf;
-+#ifdef NAND_PFM
-+ u32 pureReadOOB;
-+ u32 pureReadOOBNum;
-+#endif
-+};
-+
-+/*
-+ * ECC layout control structure. Exported to userspace for
-+ * diagnosis and to allow creation of raw images
-+struct nand_ecclayout {
-+ uint32_t eccbytes;
-+ uint32_t eccpos[64];
-+ uint32_t oobavail;
-+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
-+};
-+*/
-+#define __DEBUG_NAND 1 /* Debug information on/off */
-+
-+/* Debug message event */
-+#define DBG_EVT_NONE 0x00000000 /* No event */
-+#define DBG_EVT_INIT 0x00000001 /* Initial related event */
-+#define DBG_EVT_VERIFY 0x00000002 /* Verify buffer related event */
-+#define DBG_EVT_PERFORMANCE 0x00000004 /* Performance related event */
-+#define DBG_EVT_READ 0x00000008 /* Read related event */
-+#define DBG_EVT_WRITE 0x00000010 /* Write related event */
-+#define DBG_EVT_ERASE 0x00000020 /* Erase related event */
-+#define DBG_EVT_BADBLOCK 0x00000040 /* Badblock related event */
-+#define DBG_EVT_POWERCTL 0x00000080 /* Suspend/Resume related event */
-+
-+#define DBG_EVT_ALL 0xffffffff
-+
-+#define DBG_EVT_MASK (DBG_EVT_INIT)
-+
-+#if __DEBUG_NAND
-+#define MSG(evt, fmt, args...) \
-+do { \
-+ if ((DBG_EVT_##evt) & DBG_EVT_MASK) { \
-+ printk(fmt, ##args); \
-+ } \
-+} while(0)
-+
-+#define MSG_FUNC_ENTRY(f) MSG(FUC, "<FUN_ENT>: %s\n", __FUNCTION__)
-+#else
-+#define MSG(evt, fmt, args...) do{}while(0)
-+#define MSG_FUNC_ENTRY(f) do{}while(0)
-+#endif
-+
-+#define RAMDOM_READ 1<<0
-+#define CACHE_READ 1<<1
-+
-+typedef struct
-+{
-+ u16 id; //deviceid+menuid
-+ u32 ext_id;
-+ u8 addr_cycle;
-+ u8 iowidth;
-+ u16 totalsize;
-+ u16 blocksize;
-+ u16 pagesize;
-+ u16 sparesize;
-+ u32 timmingsetting;
-+ char devciename[14];
-+ u32 advancedmode; //
-+}flashdev_info,*pflashdev_info;
-+
-+/* NAND driver */
-+#if 0
-+struct mtk_nand_host_hw {
-+ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
-+ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
-+ unsigned int nfi_cs_num; /* NFI_CS_NUM */
-+ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
-+ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
-+ unsigned int nand_ecc_size;
-+ unsigned int nand_ecc_bytes;
-+ unsigned int nand_ecc_mode;
-+};
-+extern struct mtk_nand_host_hw mt7621_nand_hw;
-+extern u32 CFG_BLOCKSIZE;
-+#endif
-+#endif
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_12
- .length = 78} }
- };
-
--static int nand_get_device(struct mtd_info *mtd, int new_state);
-+int nand_get_device(struct mtd_info *mtd, int new_state);
-
- static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
- struct mtd_oob_ops *ops);
-@@ -130,7 +130,7 @@ static int check_offs_len(struct mtd_inf
- *
- * Release chip lock and wake up anyone waiting on the device.
- */
--static void nand_release_device(struct mtd_info *mtd)
-+void nand_release_device(struct mtd_info *mtd)
- {
- struct nand_chip *chip = mtd->priv;
-
-@@ -820,7 +820,7 @@ static void panic_nand_get_device(struct
- *
- * Get the device and lock it for exclusive access
- */
--static int
-+int
- nand_get_device(struct mtd_info *mtd, int new_state)
- {
- struct nand_chip *chip = mtd->priv;
---- a/drivers/mtd/nand/nand_bbt.c
-+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -1374,4 +1374,23 @@ int nand_markbad_bbt(struct mtd_info *mt
- return ret;
- }
-
-+void nand_bbt_set(struct mtd_info *mtd, int page, int flag)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int block;
-+
-+ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1));
-+ this->bbt[block >> 3] &= ~(0x03 << (block & 0x6));
-+ this->bbt[block >> 3] |= (flag & 0x3) << (block & 0x6);
-+}
-+
-+int nand_bbt_get(struct mtd_info *mtd, int page)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int block;
-+
-+ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1));
-+ return (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
-+}
-+
- EXPORT_SYMBOL(nand_scan_bbt);
---- /dev/null
-+++ b/drivers/mtd/nand/nand_def.h
-@@ -0,0 +1,123 @@
-+#ifndef __NAND_DEF_H__
-+#define __NAND_DEF_H__
-+
-+#define VERSION "v2.1 Fix AHB virt2phys error"
-+#define MODULE_NAME "# MTK NAND #"
-+#define PROCNAME "driver/nand"
-+
-+#undef TESTTIME
-+//#define __UBOOT_NAND__ 1
-+#define __KERNEL_NAND__ 1
-+//#define __PRELOADER_NAND__ 1
-+//#define PMT 1
-+//#define _MTK_NAND_DUMMY_DRIVER
-+//#define CONFIG_BADBLOCK_CHECK 1
-+//#ifdef CONFIG_BADBLOCK_CHECK
-+//#define MTK_NAND_BMT 1
-+//#endif
-+#define ECC_ENABLE 1
-+#define MANUAL_CORRECT 1
-+//#define __INTERNAL_USE_AHB_MODE__ (0)
-+#define SKIP_BAD_BLOCK
-+#define FACT_BBT
-+
-+#ifndef NAND_OTP_SUPPORT
-+#define NAND_OTP_SUPPORT 0
-+#endif
-+
-+/*******************************************************************************
-+ * Macro definition
-+ *******************************************************************************/
-+//#define NFI_SET_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) | (value)))
-+//#define NFI_SET_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) | (value)))
-+//#define NFI_CLN_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) & (~(value))))
-+//#define NFI_CLN_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) & (~(value))))
-+
-+#if defined (__KERNEL_NAND__)
-+#define NFI_SET_REG32(reg, value) \
-+do { \
-+ g_value = (DRV_Reg32(reg) | (value));\
-+ DRV_WriteReg32(reg, g_value); \
-+} while(0)
-+
-+#define NFI_SET_REG16(reg, value) \
-+do { \
-+ g_value = (DRV_Reg16(reg) | (value));\
-+ DRV_WriteReg16(reg, g_value); \
-+} while(0)
-+
-+#define NFI_CLN_REG32(reg, value) \
-+do { \
-+ g_value = (DRV_Reg32(reg) & (~(value)));\
-+ DRV_WriteReg32(reg, g_value); \
-+} while(0)
-+
-+#define NFI_CLN_REG16(reg, value) \
-+do { \
-+ g_value = (DRV_Reg16(reg) & (~(value)));\
-+ DRV_WriteReg16(reg, g_value); \
-+} while(0)
-+#endif
-+
-+#define NFI_WAIT_STATE_DONE(state) do{;}while (__raw_readl(NFI_STA_REG32) & state)
-+#define NFI_WAIT_TO_READY() do{;}while (!(__raw_readl(NFI_STA_REG32) & STA_BUSY2READY))
-+
-+
-+#define NAND_SECTOR_SIZE (512)
-+#define OOB_PER_SECTOR (16)
-+#define OOB_AVAI_PER_SECTOR (8)
-+
-+#ifndef PART_SIZE_BMTPOOL
-+#define BMT_POOL_SIZE (80)
-+#else
-+#define BMT_POOL_SIZE (PART_SIZE_BMTPOOL)
-+#endif
-+
-+#define PMT_POOL_SIZE (2)
-+
-+#define TIMEOUT_1 0x1fff
-+#define TIMEOUT_2 0x8ff
-+#define TIMEOUT_3 0xffff
-+#define TIMEOUT_4 0xffff//5000 //PIO
-+
-+
-+/* temporarity definiation */
-+#if !defined (__KERNEL_NAND__)
-+#define KERN_INFO
-+#define KERN_WARNING
-+#define KERN_ERR
-+#define PAGE_SIZE (4096)
-+#endif
-+#define AddStorageTrace //AddStorageTrace
-+#define STORAGE_LOGGER_MSG_NAND 0
-+#define NFI_BASE RALINK_NAND_CTRL_BASE
-+#define NFIECC_BASE RALINK_NANDECC_CTRL_BASE
-+
-+#ifdef __INTERNAL_USE_AHB_MODE__
-+#define MT65xx_POLARITY_LOW 0
-+#define MT65XX_PDN_PERI_NFI 0
-+#define MT65xx_EDGE_SENSITIVE 0
-+#define MT6575_NFI_IRQ_ID (58)
-+#endif
-+
-+#if defined (__KERNEL_NAND__)
-+#define RALINK_REG(x) (*((volatile u32 *)(x)))
-+#define __virt_to_phys(x) virt_to_phys((volatile void*)x)
-+#else
-+#define CONFIG_MTD_NAND_VERIFY_WRITE (1)
-+#define printk printf
-+#define ra_dbg printf
-+#define BUG() //BUG()
-+#define BUG_ON(x) //BUG_ON()
-+#define NUM_PARTITIONS 1
-+#endif
-+
-+#define NFI_DEFAULT_ACCESS_TIMING (0x30C77fff) //(0x44333)
-+
-+//uboot only support 1 cs
-+#define NFI_CS_NUM (1)
-+#define NFI_DEFAULT_CS (0)
-+
-+#include "mt6575_typedefs.h"
-+
-+#endif /* __NAND_DEF_H__ */
---- /dev/null
-+++ b/drivers/mtd/nand/nand_device_list.h
-@@ -0,0 +1,55 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#ifndef __NAND_DEVICE_LIST_H__
-+#define __NAND_DEVICE_LIST_H__
-+
-+static const flashdev_info gen_FlashTable[]={
-+ {0x20BC, 0x105554, 5, 16, 512, 128, 2048, 64, 0x1123, "EHD013151MA_5", 0},
-+ {0xECBC, 0x005554, 5, 16, 512, 128, 2048, 64, 0x1123, "K524G2GACB_A0", 0},
-+ {0x2CBC, 0x905556, 5, 16, 512, 128, 2048, 64, 0x21044333, "MT29C4G96MAZA", 0},
-+ {0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0},
-+ {0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0},
-+ {0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0},
-+ {0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0},
-+ {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0},
-+ {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0},
-+ {0x01DA, 0x909546, 5, 8, 256, 128, 2048, 128, 0x30C77fff, "S34ML02G200TF", 0},
-+ {0x01DC, 0x909556, 5, 8, 512, 128, 2048, 128, 0x30C77fff, "S34ML04G200TF", 0},
-+ {0x0000, 0x000000, 0, 0, 0, 0, 0, 0, 0, "xxxxxxxxxx", 0},
-+};
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/mtd/nand/partition.h
-@@ -0,0 +1,115 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define RECONFIG_PARTITION_SIZE 1
-+
-+#define MTD_BOOT_PART_SIZE 0x80000
-+#define MTD_CONFIG_PART_SIZE 0x20000
-+#define MTD_FACTORY_PART_SIZE 0x20000
-+
-+extern unsigned int CFG_BLOCKSIZE;
-+#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2)
-+#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1)
-+
-+/*=======================================================================*/
-+/* NAND PARTITION Mapping */
-+/*=======================================================================*/
-+//#ifdef CONFIG_MTD_PARTITIONS
-+static struct mtd_partition g_pasStatic_Partition[] = {
-+ {
-+ name: "ALL",
-+ size: MTDPART_SIZ_FULL,
-+ offset: 0,
-+ },
-+ /* Put your own partition definitions here */
-+ {
-+ name: "Bootloader",
-+ size: MTD_BOOT_PART_SIZE,
-+ offset: 0,
-+ }, {
-+ name: "Config",
-+ size: MTD_CONFIG_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND
-+ }, {
-+ name: "Factory",
-+ size: MTD_FACTORY_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND
-+#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
-+ }, {
-+ name: "Kernel",
-+ size: MTD_KERN_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND,
-+ }, {
-+ name: "RootFS",
-+ size: MTD_ROOTFS_PART_SIZE,
-+ offset: MTDPART_OFS_APPEND,
-+#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING
-+ }, {
-+ name: "Kernel_RootFS",
-+ size: MTD_KERN_PART_SIZE + MTD_ROOTFS_PART_SIZE,
-+ offset: MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE,
-+#endif
-+#else //CONFIG_RT2880_ROOTFS_IN_RAM
-+ }, {
-+ name: "Kernel",
-+ size: 0x10000,
-+ offset: MTDPART_OFS_APPEND,
-+#endif
-+#ifdef CONFIG_DUAL_IMAGE
-+ }, {
-+ name: "Kernel2",
-+ size: MTD_KERN2_PART_SIZE,
-+ offset: MTD_KERN2_PART_OFFSET,
-+#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH
-+ }, {
-+ name: "RootFS2",
-+ size: MTD_ROOTFS2_PART_SIZE,
-+ offset: MTD_ROOTFS2_PART_OFFSET,
-+#endif
-+#endif
-+ }
-+
-+};
-+
-+#define NUM_PARTITIONS ARRAY_SIZE(g_pasStatic_Partition)
-+extern int part_num; // = NUM_PARTITIONS;
-+//#endif
-+#undef RECONFIG_PARTITION_SIZE
-+
diff --git a/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch b/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch
deleted file mode 100644
index 78d607e7f0..0000000000
--- a/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-From 61e17c2f864698033f4661e1fc7ba63d4d982491 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:21:55 +0100
-Subject: [PATCH 40/53] nand: add mtk-nand hack/hook
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/nand/mtk_nand.c | 34 ++++++++++++++++++++++++++++++----
- drivers/mtd/nand/nand_base.c | 9 ++++++++-
- drivers/mtd/nand/nand_device_list.h | 2 ++
- include/linux/mtd/nand.h | 4 ++++
- 4 files changed, 44 insertions(+), 5 deletions(-)
-
---- a/drivers/mtd/nand/mtk_nand.c
-+++ b/drivers/mtd/nand/mtk_nand.c
-@@ -110,6 +110,10 @@ int part_num = NUM_PARTITIONS;
- int manu_id;
- int dev_id;
-
-+/* this constant was taken from linux/nand/nand.h v 3.14
-+ * in later versions it seems it was removed in order to save a bit of space
-+ */
-+#define NAND_MAX_OOBSIZE 774
- static u8 local_oob_buf[NAND_MAX_OOBSIZE];
-
- static u8 nand_badblock_offset = 0;
-@@ -348,7 +352,7 @@ mtk_nand_check_bch_error(struct mtd_info
- if (0xF == u4ErrNum) {
- mtd->ecc_stats.failed++;
- bRet = false;
-- //printk(KERN_ERR"UnCorrectable at PageAddr=%d\n", u4PageAddr);
-+ printk(KERN_ERR"mtk_nand: UnCorrectable at PageAddr=%d\n", u4PageAddr);
- } else {
- for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) {
- au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i);
-@@ -1422,7 +1426,7 @@ mtk_nand_erase_hw(struct mtd_info *mtd,
- {
- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-
-- chip->erase_cmd(mtd, page);
-+ chip->erase(mtd, page);
-
- return chip->waitfunc(mtd, chip);
- }
-@@ -2094,8 +2098,8 @@ mtk_nand_probe(struct platform_device *p
- nand_chip->write_page = mtk_nand_write_page;
- nand_chip->ecc.write_oob = mtk_nand_write_oob;
- nand_chip->block_markbad = mtk_nand_block_markbad; // need to add nand_get_device()/nand_release_device().
-- // nand_chip->erase = mtk_nand_erase;
-- // nand_chip->read_page = mtk_nand_read_page;
-+ nand_chip->erase_mtk = mtk_nand_erase;
-+ nand_chip->read_page = mtk_nand_read_page;
- nand_chip->ecc.read_oob = mtk_nand_read_oob;
- nand_chip->block_bad = mtk_nand_block_bad;
-
-@@ -2175,6 +2179,21 @@ mtk_nand_probe(struct platform_device *p
- nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1;
- nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
- nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1;
-+
-+ /* allocate buffers or call select_chip here or a bit earlier*/
-+ {
-+ struct nand_buffers *nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize + mtd->oobsize * 3, GFP_KERNEL);
-+ if (!nbuf) {
-+ return -ENOMEM;
-+ }
-+ nbuf->ecccalc = (uint8_t *)(nbuf + 1);
-+ nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
-+ nbuf->databuf = nbuf->ecccode + mtd->oobsize;
-+
-+ nand_chip->buffers = nbuf;
-+ nand_chip->options |= NAND_OWN_BUFFERS;
-+ }
-+
- nand_chip->oob_poi = nand_chip->buffers->databuf + mtd->writesize;
- nand_chip->badblockpos = 0;
-
-@@ -2251,6 +2270,9 @@ out:
- MSG(INIT, "[NFI] mtk_nand_probe fail, err = %d!\n", err);
- nand_release(mtd);
- platform_set_drvdata(pdev, NULL);
-+ if ( NULL != nand_chip->buffers) {
-+ kfree(nand_chip->buffers);
-+ }
- kfree(host);
- nand_disable_clock();
- return err;
-@@ -2261,8 +2283,12 @@ mtk_nand_remove(struct platform_device *
- {
- struct mtk_nand_host *host = platform_get_drvdata(pdev);
- struct mtd_info *mtd = &host->mtd;
-+ struct nand_chip *nand_chip = &host->nand_chip;
-
- nand_release(mtd);
-+ if ( NULL != nand_chip->buffers) {
-+ kfree(nand_chip->buffers);
-+ }
- kfree(host);
- nand_disable_clock();
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -1592,6 +1592,9 @@ static int nand_do_read_ops(struct mtd_i
- __func__, buf);
-
- read_retry:
-+#ifdef CONFIG_MTK_MTD_NAND
-+ ret = chip->read_page(mtd, chip, bufpoi, page);
-+#else
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
-
- /*
-@@ -1610,6 +1613,7 @@ read_retry:
- else
- ret = chip->ecc.read_page(mtd, chip, bufpoi,
- oob_required, page);
-+#endif /* CONFIG_MTK_MTD_NAND */
- if (ret < 0) {
- if (use_bufpoi)
- /* Invalidate page cache */
-@@ -2786,8 +2790,11 @@ int nand_erase_nand(struct mtd_info *mtd
- if (page <= chip->pagebuf && chip->pagebuf <
- (page + pages_per_block))
- chip->pagebuf = -1;
--
-+#ifdef CONFIG_MTK_MTD_NAND
-+ status = chip->erase_mtk(mtd, page & chip->pagemask);
-+#else
- status = chip->erase(mtd, page & chip->pagemask);
-+#endif /* CONFIG_MTK_MTD_NAND */
-
- /*
- * See if operation failed and additional status checks are
---- a/drivers/mtd/nand/nand_device_list.h
-+++ b/drivers/mtd/nand/nand_device_list.h
-@@ -43,6 +43,8 @@ static const flashdev_info gen_FlashTabl
- {0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0},
- {0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0},
- {0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0},
-+ {0xC8DA, 0x909544, 5, 8, 256, 128, 2048, 64, 0x30C77fff, "F59L2G81A", 0},
-+ {0xC8DC, 0x909554, 5, 8, 512, 128, 2048, 64, 0x30C77fff, "F59L4G81A", 0},
- {0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0},
- {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0},
- {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0},
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -671,6 +671,10 @@ struct nand_chip {
- int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offset, int data_len, const uint8_t *buf,
- int oob_required, int page, int cached, int raw);
-+#ifdef CONFIG_MTK_MTD_NAND
-+ int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, u8 *buf, int page);
-+ int (*erase_mtk)(struct mtd_info *mtd, int page);
-+#endif /* CONFIG_MTK_MTD_NAND */
- int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
- int feature_addr, uint8_t *subfeature_para);
- int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
diff --git a/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch
deleted file mode 100644
index e2643e3f25..0000000000
--- a/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Aug 2013 20:12:59 +0200
-Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880
-
-Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++
- 1 file changed, 28 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
-@@ -0,0 +1,28 @@
-+Ralink SoC RT2880 SPI master controller.
-+
-+This SPI controller is found on most wireless SoCs made by ralink.
-+
-+Required properties:
-+- compatible : "ralink,rt2880-spi"
-+- reg : The register base for the controller.
-+- #address-cells : <1>, as required by generic SPI binding.
-+- #size-cells : <0>, also as required by generic SPI binding.
-+
-+Child nodes as per the generic SPI binding.
-+
-+Example:
-+
-+ spi@b00 {
-+ compatible = "ralink,rt2880-spi";
-+ reg = <0xb00 0x100>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ m25p80@0 {
-+ compatible = "m25p80";
-+ reg = <0>;
-+ spi-max-frequency = <10000000>;
-+ };
-+ };
-+
diff --git a/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
deleted file mode 100644
index 596bd83e5b..0000000000
--- a/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
+++ /dev/null
@@ -1,574 +0,0 @@
-From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 11:15:12 +0100
-Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
-
-Add the driver needed to make SPI work on Ralink SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Acked-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig | 6 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 537 insertions(+)
- create mode 100644 drivers/spi/spi-rt2880.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -466,6 +466,12 @@ config SPI_QUP
- This driver can also be built as a module. If so, the module
- will be called spi_qup.
-
-+config SPI_RT2880
-+ tristate "Ralink RT288x SPI Controller"
-+ depends on RALINK
-+ help
-+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -69,6 +69,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
-+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
- spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
---- /dev/null
-+++ b/drivers/spi/spi-rt2880.c
-@@ -0,0 +1,530 @@
-+/*
-+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
-+ *
-+ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
-+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Some parts are based on spi-orion.c:
-+ * Author: Shadi Ammouri <shadi@marvell.com>
-+ * Copyright (C) 2007-2008 Marvell Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/reset.h>
-+#include <linux/spi/spi.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+
-+#define DRIVER_NAME "spi-rt2880"
-+
-+#define RAMIPS_SPI_STAT 0x00
-+#define RAMIPS_SPI_CFG 0x10
-+#define RAMIPS_SPI_CTL 0x14
-+#define RAMIPS_SPI_DATA 0x20
-+#define RAMIPS_SPI_ADDR 0x24
-+#define RAMIPS_SPI_BS 0x28
-+#define RAMIPS_SPI_USER 0x2C
-+#define RAMIPS_SPI_TXFIFO 0x30
-+#define RAMIPS_SPI_RXFIFO 0x34
-+#define RAMIPS_SPI_FIFO_STAT 0x38
-+#define RAMIPS_SPI_MODE 0x3C
-+#define RAMIPS_SPI_DEV_OFFSET 0x40
-+#define RAMIPS_SPI_DMA 0x80
-+#define RAMIPS_SPI_DMASTAT 0x84
-+#define RAMIPS_SPI_ARBITER 0xF0
-+
-+/* SPISTAT register bit field */
-+#define SPISTAT_BUSY BIT(0)
-+
-+/* SPICFG register bit field */
-+#define SPICFG_ADDRMODE BIT(12)
-+#define SPICFG_RXENVDIS BIT(11)
-+#define SPICFG_RXCAP BIT(10)
-+#define SPICFG_SPIENMODE BIT(9)
-+#define SPICFG_MSBFIRST BIT(8)
-+#define SPICFG_SPICLKPOL BIT(6)
-+#define SPICFG_RXCLKEDGE_FALLING BIT(5)
-+#define SPICFG_TXCLKEDGE_FALLING BIT(4)
-+#define SPICFG_HIZSPI BIT(3)
-+#define SPICFG_SPICLK_PRESCALE_MASK 0x7
-+#define SPICFG_SPICLK_DIV2 0
-+#define SPICFG_SPICLK_DIV4 1
-+#define SPICFG_SPICLK_DIV8 2
-+#define SPICFG_SPICLK_DIV16 3
-+#define SPICFG_SPICLK_DIV32 4
-+#define SPICFG_SPICLK_DIV64 5
-+#define SPICFG_SPICLK_DIV128 6
-+#define SPICFG_SPICLK_DISABLE 7
-+
-+/* SPICTL register bit field */
-+#define SPICTL_START BIT(4)
-+#define SPICTL_HIZSDO BIT(3)
-+#define SPICTL_STARTWR BIT(2)
-+#define SPICTL_STARTRD BIT(1)
-+#define SPICTL_SPIENA BIT(0)
-+
-+/* SPIUSER register bit field */
-+#define SPIUSER_USERMODE BIT(21)
-+#define SPIUSER_INSTR_PHASE BIT(20)
-+#define SPIUSER_ADDR_PHASE_MASK 0x7
-+#define SPIUSER_ADDR_PHASE_OFFSET 17
-+#define SPIUSER_MODE_PHASE BIT(16)
-+#define SPIUSER_DUMMY_PHASE_MASK 0x3
-+#define SPIUSER_DUMMY_PHASE_OFFSET 14
-+#define SPIUSER_DATA_PHASE_MASK 0x3
-+#define SPIUSER_DATA_PHASE_OFFSET 12
-+#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET)
-+#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET)
-+#define SPIUSER_ADDR_TYPE_OFFSET 9
-+#define SPIUSER_MODE_TYPE_OFFSET 6
-+#define SPIUSER_DUMMY_TYPE_OFFSET 3
-+#define SPIUSER_DATA_TYPE_OFFSET 0
-+#define SPIUSER_TRANSFER_MASK 0x7
-+#define SPIUSER_TRANSFER_SINGLE BIT(0)
-+#define SPIUSER_TRANSFER_DUAL BIT(1)
-+#define SPIUSER_TRANSFER_QUAD BIT(2)
-+
-+#define SPIUSER_TRANSFER_TYPE(type) ( \
-+ (type << SPIUSER_ADDR_TYPE_OFFSET) | \
-+ (type << SPIUSER_MODE_TYPE_OFFSET) | \
-+ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \
-+ (type << SPIUSER_DATA_TYPE_OFFSET) \
-+)
-+
-+/* SPIFIFOSTAT register bit field */
-+#define SPIFIFOSTAT_TXEMPTY BIT(19)
-+#define SPIFIFOSTAT_RXEMPTY BIT(18)
-+#define SPIFIFOSTAT_TXFULL BIT(17)
-+#define SPIFIFOSTAT_RXFULL BIT(16)
-+#define SPIFIFOSTAT_FIFO_MASK 0xff
-+#define SPIFIFOSTAT_TX_OFFSET 8
-+#define SPIFIFOSTAT_RX_OFFSET 0
-+
-+#define SPI_FIFO_DEPTH 16
-+
-+/* SPIMODE register bit field */
-+#define SPIMODE_MODE_OFFSET 24
-+#define SPIMODE_DUMMY_OFFSET 0
-+
-+/* SPIARB register bit field */
-+#define SPICTL_ARB_EN BIT(31)
-+#define SPICTL_CSCTL1 BIT(16)
-+#define SPI1_POR BIT(1)
-+#define SPI0_POR BIT(0)
-+
-+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
-+ SPI_CS_HIGH)
-+
-+static atomic_t hw_reset_count = ATOMIC_INIT(0);
-+
-+struct rt2880_spi {
-+ struct spi_master *master;
-+ void __iomem *base;
-+ u32 speed;
-+ u16 wait_loops;
-+ u16 mode;
-+ struct clk *clk;
-+};
-+
-+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-+{
-+ return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg)
-+{
-+ return ioread32(rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg,
-+ const u32 val)
-+{
-+ iowrite32(val, rs->base + reg);
-+}
-+
-+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+ void __iomem *addr = rs->base + reg;
-+
-+ iowrite32((ioread32(addr) | mask), addr);
-+}
-+
-+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask)
-+{
-+ void __iomem *addr = rs->base + reg;
-+
-+ iowrite32((ioread32(addr) & ~mask), addr);
-+}
-+
-+static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ u32 rate;
-+ u32 prescale;
-+
-+ /*
-+ * the supported rates are: 2, 4, 8, ... 128
-+ * round up as we look for equal or less speed
-+ */
-+ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
-+ rate = roundup_pow_of_two(rate);
-+
-+ /* Convert the rate to SPI clock divisor value. */
-+ prescale = ilog2(rate / 2);
-+
-+ /* some tolerance. double and add 100 */
-+ rs->wait_loops = (8 * HZ * loops_per_jiffy) /
-+ (clk_get_rate(rs->clk) / rate);
-+ rs->wait_loops = (rs->wait_loops << 1) + 100;
-+ rs->speed = speed;
-+
-+ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
-+ clk_get_rate(rs->clk) / rate, speed, rate, prescale,
-+ rs->wait_loops);
-+
-+ return prescale;
-+}
-+
-+static u32 get_arbiter_offset(struct spi_master *master)
-+{
-+ u32 offset;
-+
-+ offset = RAMIPS_SPI_ARBITER;
-+ if (master->bus_num == 1)
-+ offset -= RAMIPS_SPI_DEV_OFFSET;
-+
-+ return offset;
-+}
-+
-+static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+
-+ if (enable)
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+ else
-+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+}
-+
-+static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
-+{
-+ int loop = rs->wait_loops * len;
-+
-+ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop)
-+ cpu_relax();
-+
-+ if (loop)
-+ return 0;
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static void rt2880_dump_reg(struct spi_master *master)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+
-+ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
-+ "data: %08x, arb: %08x\n",
-+ rt2880_spi_read(rs, RAMIPS_SPI_STAT),
-+ rt2880_spi_read(rs, RAMIPS_SPI_CFG),
-+ rt2880_spi_read(rs, RAMIPS_SPI_CTL),
-+ rt2880_spi_read(rs, RAMIPS_SPI_DATA),
-+ rt2880_spi_read(rs, get_arbiter_offset(master)));
-+}
-+
-+static int rt2880_spi_transfer_one(struct spi_master *master,
-+ struct spi_device *spi, struct spi_transfer *xfer)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ unsigned len;
-+ const u8 *tx = xfer->tx_buf;
-+ u8 *rx = xfer->rx_buf;
-+ int err = 0;
-+
-+ /* change clock speed */
-+ if (unlikely(rs->speed != xfer->speed_hz)) {
-+ u32 reg;
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+ reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
-+ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+ }
-+
-+ if (tx) {
-+ len = xfer->len;
-+ while (len-- > 0) {
-+ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
-+ err = rt2880_spi_wait_ready(rs, 1);
-+ if (err) {
-+ dev_err(&spi->dev, "TX failed, err=%d\n", err);
-+ goto out;
-+ }
-+ }
-+ }
-+
-+ if (rx) {
-+ len = xfer->len;
-+ while (len-- > 0) {
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
-+ err = rt2880_spi_wait_ready(rs, 1);
-+ if (err) {
-+ dev_err(&spi->dev, "RX failed, err=%d\n", err);
-+ goto out;
-+ }
-+ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
-+ }
-+ }
-+
-+out:
-+ return err;
-+}
-+
-+/* copy from spi.c */
-+static void spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+ if (spi->mode & SPI_CS_HIGH)
-+ enable = !enable;
-+
-+ if (spi->cs_gpio >= 0)
-+ gpio_set_value(spi->cs_gpio, !enable);
-+ else if (spi->master->set_cs)
-+ spi->master->set_cs(spi, !enable);
-+}
-+
-+static int rt2880_spi_setup(struct spi_device *spi)
-+{
-+ struct spi_master *master = spi->master;
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ u32 reg, old_reg, arbit_off;
-+
-+ if ((spi->max_speed_hz > master->max_speed_hz) ||
-+ (spi->max_speed_hz < master->min_speed_hz)) {
-+ dev_err(&spi->dev, "invalide requested speed %d Hz\n",
-+ spi->max_speed_hz);
-+ return -EINVAL;
-+ }
-+
-+ if (!(master->bits_per_word_mask &
-+ BIT(spi->bits_per_word - 1))) {
-+ dev_err(&spi->dev, "invalide bits_per_word %d\n",
-+ spi->bits_per_word);
-+ return -EINVAL;
-+ }
-+
-+ /* the hardware seems can't work on mode0 force it to mode3 */
-+ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) {
-+ dev_warn(&spi->dev, "force spi mode3\n");
-+ spi->mode |= SPI_MODE_3;
-+ }
-+
-+ /* chip polarity */
-+ arbit_off = get_arbiter_offset(master);
-+ reg = old_reg = rt2880_spi_read(rs, arbit_off);
-+ if (spi->mode & SPI_CS_HIGH) {
-+ switch (master->bus_num) {
-+ case 1:
-+ reg |= SPI1_POR;
-+ break;
-+ default:
-+ reg |= SPI0_POR;
-+ break;
-+ }
-+ } else {
-+ switch (master->bus_num) {
-+ case 1:
-+ reg &= ~SPI1_POR;
-+ break;
-+ default:
-+ reg &= ~SPI0_POR;
-+ break;
-+ }
-+ }
-+
-+ /* enable spi1 */
-+ if (master->bus_num == 1)
-+ reg |= SPICTL_ARB_EN;
-+
-+ if (reg != old_reg)
-+ rt2880_spi_write(rs, arbit_off, reg);
-+
-+ /* deselected the spi device */
-+ spi_set_cs(spi, false);
-+
-+ rt2880_dump_reg(master);
-+
-+ return 0;
-+}
-+
-+static int rt2880_spi_prepare_message(struct spi_master *master,
-+ struct spi_message *msg)
-+{
-+ struct rt2880_spi *rs = spi_master_get_devdata(master);
-+ struct spi_device *spi = msg->spi;
-+ u32 reg;
-+
-+ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
-+ return 0;
-+
-+#if 0
-+ /* set spido to tri-state */
-+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
-+#endif
-+
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+
-+ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
-+ SPICFG_RXCLKEDGE_FALLING |
-+ SPICFG_TXCLKEDGE_FALLING |
-+ SPICFG_SPICLK_PRESCALE_MASK);
-+
-+ /* MSB */
-+ if (!(spi->mode & SPI_LSB_FIRST))
-+ reg |= SPICFG_MSBFIRST;
-+
-+ /* spi mode */
-+ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
-+ case SPI_MODE_0:
-+ reg |= SPICFG_TXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_1:
-+ reg |= SPICFG_RXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_2:
-+ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
-+ break;
-+ case SPI_MODE_3:
-+ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
-+ break;
-+ }
-+ rs->mode = spi->mode;
-+
-+#if 0
-+ /* set spiclk and spiena to tri-state */
-+ reg |= SPICFG_HIZSPI;
-+#endif
-+
-+ /* clock divide */
-+ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
-+
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2880_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct rt2880_spi *rs;
-+ void __iomem *base;
-+ struct resource *r;
-+ struct clk *clk;
-+ int ret;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "unable to get SYS clock\n");
-+ return PTR_ERR(clk);
-+ }
-+
-+ ret = clk_prepare_enable(clk);
-+ if (ret)
-+ goto err_clk;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
-+ if (master == NULL) {
-+ dev_dbg(&pdev->dev, "master allocation failed\n");
-+ ret = -ENOMEM;
-+ goto err_clk;
-+ }
-+
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->mode_bits = RT2880_SPI_MODE_BITS;
-+ master->bits_per_word_mask = SPI_BPW_MASK(8);
-+ master->min_speed_hz = clk_get_rate(clk) / 128;
-+ master->max_speed_hz = clk_get_rate(clk) / 2;
-+ master->flags = SPI_MASTER_HALF_DUPLEX;
-+ master->setup = rt2880_spi_setup;
-+ master->prepare_message = rt2880_spi_prepare_message;
-+ master->set_cs = rt2880_spi_set_cs;
-+ master->transfer_one = rt2880_spi_transfer_one,
-+
-+ dev_set_drvdata(&pdev->dev, master);
-+
-+ rs = spi_master_get_devdata(master);
-+ rs->master = master;
-+ rs->base = base;
-+ rs->clk = clk;
-+
-+ if (atomic_inc_return(&hw_reset_count) == 1)
-+ device_reset(&pdev->dev);
-+
-+ ret = devm_spi_register_master(&pdev->dev, master);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "devm_spi_register_master error.\n");
-+ goto err_master;
-+ }
-+
-+ return ret;
-+
-+err_master:
-+ spi_master_put(master);
-+ kfree(master);
-+err_clk:
-+ clk_disable_unprepare(clk);
-+
-+ return ret;
-+}
-+
-+static int rt2880_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct rt2880_spi *rs;
-+
-+ master = dev_get_drvdata(&pdev->dev);
-+ rs = spi_master_get_devdata(master);
-+
-+ clk_disable_unprepare(rs->clk);
-+ atomic_dec(&hw_reset_count);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+
-+static const struct of_device_id rt2880_spi_match[] = {
-+ { .compatible = "ralink,rt2880-spi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_spi_match);
-+
-+static struct platform_driver rt2880_spi_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_spi_match,
-+ },
-+ .probe = rt2880_spi_probe,
-+ .remove = rt2880_spi_remove,
-+};
-+
-+module_platform_driver(rt2880_spi_driver);
-+
-+MODULE_DESCRIPTION("Ralink SPI driver");
-+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch b/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch
deleted file mode 100644
index eab30ae1e1..0000000000
--- a/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch
+++ /dev/null
@@ -1,521 +0,0 @@
-From 87a5fcd57c577cd94b5b080deb98885077c13a42 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:49:07 +0100
-Subject: [PATCH 43/53] spi: add mt7621 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/spi/Kconfig | 6 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-mt7621.c | 480 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 487 insertions(+)
- create mode 100644 drivers/spi/spi-mt7621.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -472,6 +472,12 @@ config SPI_RT2880
- help
- This selects a driver for the Ralink RT288x/RT305x SPI Controller.
-
-+config SPI_MT7621
-+ tristate "MediaTek MT7621 SPI Controller"
-+ depends on RALINK
-+ help
-+ This selects a driver for the MediaTek MT7621 SPI Controller.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mp
- obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
- obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
- obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
-+obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o
- obj-$(CONFIG_SPI_MXS) += spi-mxs.o
- obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
- obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
---- /dev/null
-+++ b/drivers/spi/spi-mt7621.c
-@@ -0,0 +1,480 @@
-+/*
-+ * spi-mt7621.c -- MediaTek MT7621 SPI controller driver
-+ *
-+ * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
-+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2014-2015 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Some parts are based on spi-orion.c:
-+ * Author: Shadi Ammouri <shadi@marvell.com>
-+ * Copyright (C) 2007-2008 Marvell Ltd.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/reset.h>
-+#include <linux/spi/spi.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/swab.h>
-+
-+#include <ralink_regs.h>
-+
-+#define SPI_BPW_MASK(bits) BIT((bits) - 1)
-+
-+#define DRIVER_NAME "spi-mt7621"
-+/* in usec */
-+#define RALINK_SPI_WAIT_MAX_LOOP 2000
-+
-+/* SPISTAT register bit field */
-+#define SPISTAT_BUSY BIT(0)
-+
-+#define MT7621_SPI_TRANS 0x00
-+#define SPITRANS_BUSY BIT(16)
-+
-+#define MT7621_SPI_OPCODE 0x04
-+#define MT7621_SPI_DATA0 0x08
-+#define MT7621_SPI_DATA4 0x18
-+#define SPI_CTL_TX_RX_CNT_MASK 0xff
-+#define SPI_CTL_START BIT(8)
-+
-+#define MT7621_SPI_POLAR 0x38
-+#define MT7621_SPI_MASTER 0x28
-+#define MT7621_SPI_MOREBUF 0x2c
-+#define MT7621_SPI_SPACE 0x3c
-+
-+#define MT7621_CPHA BIT(5)
-+#define MT7621_CPOL BIT(4)
-+#define MT7621_LSB_FIRST BIT(3)
-+
-+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH)
-+
-+struct mt7621_spi;
-+
-+struct mt7621_spi {
-+ struct spi_master *master;
-+ void __iomem *base;
-+ unsigned int sys_freq;
-+ unsigned int speed;
-+ struct clk *clk;
-+ spinlock_t lock;
-+
-+ struct mt7621_spi_ops *ops;
-+};
-+
-+static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi)
-+{
-+ return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg)
-+{
-+ return ioread32(rs->base + reg);
-+}
-+
-+static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val)
-+{
-+ iowrite32(val, rs->base + reg);
-+}
-+
-+static void mt7621_spi_reset(struct mt7621_spi *rs, int duplex)
-+{
-+ u32 master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
-+
-+ master |= 7 << 29;
-+ master |= 1 << 2;
-+ if (duplex)
-+ master |= 1 << 10;
-+ else
-+ master &= ~(1 << 10);
-+
-+ mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
-+}
-+
-+static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
-+{
-+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
-+ int cs = spi->chip_select;
-+ u32 polar = 0;
-+
-+ mt7621_spi_reset(rs, cs);
-+ if (enable)
-+ polar = BIT(cs);
-+ mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
-+}
-+
-+static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed)
-+{
-+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
-+ u32 rate;
-+ u32 reg;
-+
-+ dev_dbg(&spi->dev, "speed:%u\n", speed);
-+
-+ rate = DIV_ROUND_UP(rs->sys_freq, speed);
-+ dev_dbg(&spi->dev, "rate-1:%u\n", rate);
-+
-+ if (rate > 4097)
-+ return -EINVAL;
-+
-+ if (rate < 2)
-+ rate = 2;
-+
-+ reg = mt7621_spi_read(rs, MT7621_SPI_MASTER);
-+ reg &= ~(0xfff << 16);
-+ reg |= (rate - 2) << 16;
-+ rs->speed = speed;
-+
-+ reg &= ~MT7621_LSB_FIRST;
-+ if (spi->mode & SPI_LSB_FIRST)
-+ reg |= MT7621_LSB_FIRST;
-+
-+ reg &= ~(MT7621_CPHA | MT7621_CPOL);
-+ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) {
-+ case SPI_MODE_0:
-+ break;
-+ case SPI_MODE_1:
-+ reg |= MT7621_CPHA;
-+ break;
-+ case SPI_MODE_2:
-+ reg |= MT7621_CPOL;
-+ break;
-+ case SPI_MODE_3:
-+ reg |= MT7621_CPOL | MT7621_CPHA;
-+ break;
-+ }
-+ mt7621_spi_write(rs, MT7621_SPI_MASTER, reg);
-+
-+ return 0;
-+}
-+
-+static inline int mt7621_spi_wait_till_ready(struct spi_device *spi)
-+{
-+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
-+ int i;
-+
-+ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) {
-+ u32 status;
-+
-+ status = mt7621_spi_read(rs, MT7621_SPI_TRANS);
-+ if ((status & SPITRANS_BUSY) == 0) {
-+ return 0;
-+ }
-+ cpu_relax();
-+ udelay(1);
-+ }
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int mt7621_spi_transfer_half_duplex(struct spi_master *master,
-+ struct spi_message *m)
-+{
-+ struct mt7621_spi *rs = spi_master_get_devdata(master);
-+ struct spi_device *spi = m->spi;
-+ unsigned int speed = spi->max_speed_hz;
-+ struct spi_transfer *t = NULL;
-+ int status = 0;
-+ int i, len = 0;
-+ int rx_len = 0;
-+ u32 data[9] = { 0 };
-+ u32 val;
-+
-+ mt7621_spi_wait_till_ready(spi);
-+
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ const u8 *buf = t->tx_buf;
-+
-+ if (t->rx_buf)
-+ rx_len += t->len;
-+
-+ if (!buf)
-+ continue;
-+
-+ if (WARN_ON(len + t->len > 36)) {
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ for (i = 0; i < t->len; i++, len++)
-+ data[len / 4] |= buf[i] << (8 * (len & 3));
-+ }
-+
-+ if (WARN_ON(rx_len > 32)) {
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ if (mt7621_spi_prepare(spi, speed)) {
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+ data[0] = swab32(data[0]);
-+ if (len < 4)
-+ data[0] >>= (4 - len) * 8;
-+
-+ for (i = 0; i < len; i += 4)
-+ mt7621_spi_write(rs, MT7621_SPI_OPCODE + i, data[i / 4]);
-+
-+ val = (min_t(int, len, 4) * 8) << 24;
-+ if (len > 4)
-+ val |= (len - 4) * 8;
-+ val |= (rx_len * 8) << 12;
-+ mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
-+
-+ mt7621_spi_set_cs(spi, 1);
-+
-+ val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
-+ val |= SPI_CTL_START;
-+ mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
-+
-+ mt7621_spi_wait_till_ready(spi);
-+
-+ mt7621_spi_set_cs(spi, 0);
-+
-+ for (i = 0; i < rx_len; i += 4)
-+ data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
-+
-+ m->actual_length = len + rx_len;
-+
-+ len = 0;
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ u8 *buf = t->rx_buf;
-+
-+ if (!buf)
-+ continue;
-+
-+ for (i = 0; i < t->len; i++, len++)
-+ buf[i] = data[len / 4] >> (8 * (len & 3));
-+ }
-+
-+msg_done:
-+ m->status = status;
-+ spi_finalize_current_message(master);
-+
-+ return 0;
-+}
-+
-+static int mt7621_spi_transfer_full_duplex(struct spi_master *master,
-+ struct spi_message *m)
-+{
-+ struct mt7621_spi *rs = spi_master_get_devdata(master);
-+ struct spi_device *spi = m->spi;
-+ unsigned int speed = spi->max_speed_hz;
-+ struct spi_transfer *t = NULL;
-+ int status = 0;
-+ int i, len = 0;
-+ int rx_len = 0;
-+ u32 data[9] = { 0 };
-+ u32 val = 0;
-+
-+ mt7621_spi_wait_till_ready(spi);
-+
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ const u8 *buf = t->tx_buf;
-+
-+ if (t->rx_buf)
-+ rx_len += t->len;
-+
-+ if (!buf)
-+ continue;
-+
-+ if (WARN_ON(len + t->len > 16)) {
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ for (i = 0; i < t->len; i++, len++)
-+ data[len / 4] |= buf[i] << (8 * (len & 3));
-+ if (speed > t->speed_hz)
-+ speed = t->speed_hz;
-+ }
-+
-+ if (WARN_ON(rx_len > 16)) {
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ if (mt7621_spi_prepare(spi, speed)) {
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ for (i = 0; i < len; i += 4)
-+ mt7621_spi_write(rs, MT7621_SPI_DATA0 + i, data[i / 4]);
-+
-+ val |= len * 8;
-+ val |= (rx_len * 8) << 12;
-+ mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
-+
-+ mt7621_spi_set_cs(spi, 1);
-+
-+ val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
-+ val |= SPI_CTL_START;
-+ mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
-+
-+ mt7621_spi_wait_till_ready(spi);
-+
-+ mt7621_spi_set_cs(spi, 0);
-+
-+ for (i = 0; i < rx_len; i += 4)
-+ data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA4 + i);
-+
-+ m->actual_length = rx_len;
-+
-+ len = 0;
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ u8 *buf = t->rx_buf;
-+
-+ if (!buf)
-+ continue;
-+
-+ for (i = 0; i < t->len; i++, len++)
-+ buf[i] = data[len / 4] >> (8 * (len & 3));
-+ }
-+
-+msg_done:
-+ m->status = status;
-+ spi_finalize_current_message(master);
-+
-+ return 0;
-+}
-+
-+static int mt7621_spi_transfer_one_message(struct spi_master *master,
-+ struct spi_message *m)
-+{
-+ struct spi_device *spi = m->spi;
-+ int cs = spi->chip_select;
-+
-+ if (cs)
-+ return mt7621_spi_transfer_full_duplex(master, m);
-+ return mt7621_spi_transfer_half_duplex(master, m);
-+}
-+
-+static int mt7621_spi_setup(struct spi_device *spi)
-+{
-+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
-+
-+ if ((spi->max_speed_hz == 0) ||
-+ (spi->max_speed_hz > (rs->sys_freq / 2)))
-+ spi->max_speed_hz = (rs->sys_freq / 2);
-+
-+ if (spi->max_speed_hz < (rs->sys_freq / 4097)) {
-+ dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n",
-+ spi->max_speed_hz);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7621_spi_match[] = {
-+ { .compatible = "ralink,mt7621-spi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7621_spi_match);
-+
-+static int mt7621_spi_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct spi_master *master;
-+ struct mt7621_spi *rs;
-+ unsigned long flags;
-+ void __iomem *base;
-+ struct resource *r;
-+ int status = 0;
-+ struct clk *clk;
-+ struct mt7621_spi_ops *ops;
-+
-+ match = of_match_device(mt7621_spi_match, &pdev->dev);
-+ if (!match)
-+ return -EINVAL;
-+ ops = (struct mt7621_spi_ops *)match->data;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n",
-+ status);
-+ return PTR_ERR(clk);
-+ }
-+
-+ status = clk_prepare_enable(clk);
-+ if (status)
-+ return status;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*rs));
-+ if (master == NULL) {
-+ dev_info(&pdev->dev, "master allocation failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ master->mode_bits = RT2880_SPI_MODE_BITS;
-+
-+ master->setup = mt7621_spi_setup;
-+ master->transfer_one_message = mt7621_spi_transfer_one_message;
-+ master->bits_per_word_mask = SPI_BPW_MASK(8);
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->num_chipselect = 2;
-+
-+ dev_set_drvdata(&pdev->dev, master);
-+
-+ rs = spi_master_get_devdata(master);
-+ rs->base = base;
-+ rs->clk = clk;
-+ rs->master = master;
-+ rs->sys_freq = clk_get_rate(rs->clk);
-+ rs->ops = ops;
-+ dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
-+ spin_lock_irqsave(&rs->lock, flags);
-+
-+ device_reset(&pdev->dev);
-+
-+ mt7621_spi_reset(rs, 0);
-+
-+ return spi_register_master(master);
-+}
-+
-+static int mt7621_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct mt7621_spi *rs;
-+
-+ master = dev_get_drvdata(&pdev->dev);
-+ rs = spi_master_get_devdata(master);
-+
-+ clk_disable(rs->clk);
-+ spi_unregister_master(master);
-+
-+ return 0;
-+}
-+
-+MODULE_ALIAS("platform:" DRIVER_NAME);
-+
-+static struct platform_driver mt7621_spi_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7621_spi_match,
-+ },
-+ .probe = mt7621_spi_probe,
-+ .remove = mt7621_spi_remove,
-+};
-+
-+module_platform_driver(mt7621_spi_driver);
-+
-+MODULE_DESCRIPTION("MT7621 SPI driver");
-+MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
deleted file mode 100644
index 30108fb6d9..0000000000
--- a/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
+++ /dev/null
@@ -1,398 +0,0 @@
-From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:52:56 +0100
-Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
- drivers/i2c/busses/Kconfig | 4 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++
- 4 files changed, 359 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
- create mode 100644 drivers/i2c/busses/i2c-ralink.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
-@@ -0,0 +1,27 @@
-+I2C for Ralink platforms
-+
-+Required properties :
-+- compatible : Must be "link,rt3052-i2c"
-+- reg: physical base address of the controller and length of memory mapped
-+ region.
-+- #address-cells = <1>;
-+- #size-cells = <0>;
-+
-+Optional properties:
-+- Child nodes conforming to i2c bus binding
-+
-+Example :
-+
-+palmbus@10000000 {
-+ i2c@900 {
-+ compatible = "link,rt3052-i2c";
-+ reg = <0x900 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hwmon@4b {
-+ compatible = "national,lm92";
-+ reg = <0x4b>;
-+ };
-+ };
-+};
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -803,6 +803,10 @@ config I2C_RK3X
- This driver can also be built as a module. If so, the module will
- be called i2c-rk3x.
-
-+config I2C_RALINK
-+ tristate "Ralink I2C Controller"
-+ select OF_I2C
-+
- config HAVE_S3C2410_I2C
- bool
- help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -75,6 +75,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
- obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
- obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
- obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
-+obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
- obj-$(CONFIG_I2C_QUP) += i2c-qup.o
- obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
- obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-ralink.c
-@@ -0,0 +1,327 @@
-+/*
-+ * drivers/i2c/busses/i2c-ralink.c
-+ *
-+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
-+ *
-+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
-+ * (C) 2014 Sittisak <sittisaks@hotmail.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define REG_CONFIG_REG 0x00
-+#define REG_CLKDIV_REG 0x04
-+#define REG_DEVADDR_REG 0x08
-+#define REG_ADDR_REG 0x0C
-+#define REG_DATAOUT_REG 0x10
-+#define REG_DATAIN_REG 0x14
-+#define REG_STATUS_REG 0x18
-+#define REG_STARTXFR_REG 0x1C
-+#define REG_BYTECNT_REG 0x20
-+#define REG_SM0CFG2 0x28
-+#define REG_SM0CTL0 0x40
-+
-+#define I2C_STARTERR BIT(4)
-+#define I2C_ACKERR BIT(3)
-+#define I2C_DATARDY BIT(2)
-+#define I2C_SDOEMPTY BIT(1)
-+#define I2C_BUSY BIT(0)
-+
-+#define I2C_DEVADLEN_7 (6 << 2)
-+#define I2C_ADDRDIS BIT(1)
-+
-+#define CLKDIV_VALUE 200 // clock rate is 40M, 40M / (200*2) = 100k (standard i2c bus rate).
-+//#define CLKDIV_VALUE 50 // clock rate is 40M, 40M / (50*2) = 400k (fast i2c bus rate).
-+
-+#define READ_CMD 0x01
-+#define WRITE_CMD 0x00
-+#define READ_BLOCK 64
-+
-+#define SM0CTL0_OD BIT(31)
-+#define SM0CTL0_VTRIG BIT(28)
-+#define SM0CTL0_OUTHI BIT(6)
-+#define SM0CTL0_STRETCH BIT(1)
-+#define SM0CTL0_DEFAULT (SM0CTL0_OD | SM0CTL0_VTRIG | SM0CTL0_OUTHI | SM0CTL0_STRETCH)
-+
-+/* timeout waiting for I2C devices to respond (clock streching) */
-+#define RT_I2C_TIMEOUT (msecs_to_jiffies(1000))
-+
-+enum {
-+ I2C_TYPE_RALINK,
-+ I2C_TYPE_MEDIATEK,
-+};
-+
-+static void __iomem *membase;
-+static struct i2c_adapter *adapter;
-+static int hw_type;
-+
-+static void rt_i2c_w32(u32 val, unsigned reg)
-+{
-+ iowrite32(val, membase + reg);
-+}
-+
-+static u32 rt_i2c_r32(unsigned reg)
-+{
-+ return ioread32(membase + reg);
-+}
-+
-+static inline int rt_i2c_get_ack(void)
-+{
-+ return (rt_i2c_r32(REG_STATUS_REG) & I2C_ACKERR) ? -EIO : 0;
-+}
-+
-+static inline int rt_i2c_wait_rx_done(void)
-+{
-+ unsigned long timeout;
-+
-+ timeout = jiffies + RT_I2C_TIMEOUT;
-+
-+ do {
-+ if (time_after(jiffies, timeout))
-+ return (-ETIMEDOUT);
-+
-+ } while (!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY));
-+
-+ return 0;
-+}
-+
-+static inline int rt_i2c_wait_idle(void)
-+{
-+ unsigned long timeout;
-+
-+ timeout = jiffies + RT_I2C_TIMEOUT;
-+
-+ do {
-+ if (time_after(jiffies, timeout)) {
-+ printk("i2c-read line busy\n");
-+ return 1;
-+ }
-+ } while (rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY);
-+
-+ return 0;
-+}
-+
-+static inline int rt_i2c_wait_tx_done(void)
-+{
-+ unsigned long timeout;
-+
-+ timeout = jiffies + RT_I2C_TIMEOUT;
-+
-+ do {
-+ if (time_after(jiffies, timeout))
-+ return (-ETIMEDOUT);
-+
-+ } while (!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY));
-+
-+ return 0;
-+}
-+
-+static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
-+{
-+ int i = 0, j = 0, pos = 0;
-+ int nblock = msg->len / READ_BLOCK;
-+ int rem = msg->len % READ_BLOCK;
-+ int ret = 0;
-+
-+ if (msg->flags & I2C_M_TEN) {
-+ printk("10 bits addr not supported\n");
-+ return -EINVAL;
-+ }
-+
-+ if (msg->flags & I2C_M_RD) {
-+ for (i = 0; i < nblock; i++) {
-+ if (rt_i2c_wait_idle())
-+ return -ETIMEDOUT;
-+ rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
-+ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
-+ for (j = 0; j < READ_BLOCK; j++) {
-+ if (rt_i2c_wait_rx_done() < 0)
-+ ret = rt_i2c_wait_rx_done();
-+ if (rt_i2c_get_ack() < 0)
-+ ret = rt_i2c_get_ack();
-+ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
-+ }
-+ }
-+
-+ if (rt_i2c_wait_idle())
-+ return -ETIMEDOUT;
-+ if (rem) {
-+ rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
-+ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
-+ }
-+ for (i = 0; i < rem; i++) {
-+ if (rt_i2c_wait_rx_done() < 0)
-+ ret = rt_i2c_wait_rx_done();
-+ if (rt_i2c_get_ack() < 0)
-+ ret = rt_i2c_get_ack();
-+
-+ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
-+ }
-+ } else {
-+ if (rt_i2c_wait_idle())
-+ return -ETIMEDOUT;
-+ rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
-+ for (i = 0; i < msg->len; i++) {
-+ rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
-+ rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
-+
-+ if (rt_i2c_wait_tx_done() < 0)
-+ ret = rt_i2c_wait_tx_done();
-+ if (rt_i2c_get_ack() < 0)
-+ ret = rt_i2c_get_ack();
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
-+{
-+ int i = 0;
-+ int ret = 0;
-+
-+ if (rt_i2c_wait_idle())
-+ return -ETIMEDOUT;
-+
-+ device_reset(a->dev.parent);
-+
-+ rt_i2c_w32(m->addr, REG_DEVADDR_REG);
-+ rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG);
-+ if (hw_type == I2C_TYPE_RALINK) {
-+ rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG);
-+ } else {
-+ rt_i2c_w32((CLKDIV_VALUE << 16) | SM0CTL0_DEFAULT, REG_SM0CTL0);
-+ rt_i2c_w32(1, REG_SM0CFG2);
-+ }
-+
-+ for (i = 0; i < n && !ret; i++) {
-+ ret = rt_i2c_handle_msg(a, &m[i]);
-+
-+ if (ret < 0) {
-+ return ret;
-+ }
-+ }
-+
-+ return n;
-+}
-+
-+static u32 rt_i2c_func(struct i2c_adapter *a)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static const struct i2c_algorithm rt_i2c_algo = {
-+ .master_xfer = rt_i2c_master_xfer,
-+ .functionality = rt_i2c_func,
-+};
-+
-+static const struct of_device_id i2c_rt_dt_ids[] = {
-+ { .compatible = "ralink,rt2880-i2c", .data = (void *) I2C_TYPE_RALINK },
-+ { .compatible = "mediatek,mt7628-i2c", .data = (void *) I2C_TYPE_MEDIATEK },
-+ { /* sentinel */ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
-+
-+static int rt_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const struct of_device_id *match;
-+ int ret;
-+
-+ match = of_match_device(i2c_rt_dt_ids, &pdev->dev);
-+ hw_type = (int) match->data;
-+
-+ if (!res) {
-+ dev_err(&pdev->dev, "no memory resource found\n");
-+ return -ENODEV;
-+ }
-+
-+ adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
-+ if (!adapter) {
-+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
-+ return -ENOMEM;
-+ }
-+
-+ membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(membase))
-+ return PTR_ERR(membase);
-+
-+ strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
-+ adapter->owner = THIS_MODULE;
-+ adapter->nr = pdev->id;
-+ adapter->timeout = HZ;
-+ adapter->algo = &rt_i2c_algo;
-+ adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ adapter->dev.parent = &pdev->dev;
-+ adapter->dev.of_node = pdev->dev.of_node;
-+
-+ ret = i2c_add_numbered_adapter(adapter);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, adapter);
-+
-+ dev_info(&pdev->dev, "loaded\n");
-+
-+ return 0;
-+}
-+
-+static int rt_i2c_remove(struct platform_device *pdev)
-+{
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver rt_i2c_driver = {
-+ .probe = rt_i2c_probe,
-+ .remove = rt_i2c_remove,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "i2c-ralink",
-+ .of_match_table = i2c_rt_dt_ids,
-+ },
-+};
-+
-+static int __init i2c_rt_init (void)
-+{
-+ return platform_driver_register(&rt_i2c_driver);
-+}
-+subsys_initcall(i2c_rt_init);
-+
-+static void __exit i2c_rt_exit (void)
-+{
-+ platform_driver_unregister(&rt_i2c_driver);
-+}
-+
-+module_exit (i2c_rt_exit);
-+
-+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
-+MODULE_DESCRIPTION("Ralink I2c host driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:Ralink-I2C");
diff --git a/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch b/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch
deleted file mode 100644
index dc961fab34..0000000000
--- a/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch
+++ /dev/null
@@ -1,342 +0,0 @@
-From d5c54ff3d1db0a4348fa04d8e78f3bf6063e3afc Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:21:27 +0100
-Subject: [PATCH 45/53] i2c: add mt7621 driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/i2c/busses/Kconfig | 4 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-mt7621.c | 303 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 308 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-mt7621.c
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -807,6 +807,10 @@ config I2C_RALINK
- tristate "Ralink I2C Controller"
- select OF_I2C
-
-+config I2C_MT7621
-+ tristate "MT7621 I2C Controller"
-+ select OF_I2C
-+
- config HAVE_S3C2410_I2C
- bool
- help
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
- obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
- obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
- obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
-+obj-$(CONFIG_I2C_MT7621) += i2c-mt7621.o
- obj-$(CONFIG_I2C_QUP) += i2c-qup.o
- obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
- obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-mt7621.c
-@@ -0,0 +1,303 @@
-+/*
-+ * drivers/i2c/busses/i2c-mt7621.c
-+ *
-+ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
-+ *
-+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
-+ * (C) 2014 Sittisak <sittisaks@hotmail.com>
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/reset.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/i2c.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define REG_CONFIG_REG 0x00
-+#define REG_CLKDIV_REG 0x04
-+#define REG_DEVADDR_REG 0x08
-+#define REG_ADDR_REG 0x0C
-+#define REG_DATAOUT_REG 0x10
-+#define REG_DATAIN_REG 0x14
-+#define REG_STATUS_REG 0x18
-+#define REG_STARTXFR_REG 0x1C
-+#define REG_BYTECNT_REG 0x20
-+#define REG_SM0_IS_AUTOMODE 0x28
-+#define REG_SM0CTL0 0x40
-+
-+
-+#define I2C_STARTERR 0x10
-+#define I2C_ACKERR 0x08
-+#define I2C_DATARDY 0x04
-+#define I2C_SDOEMPTY 0x02
-+#define I2C_BUSY 0x01
-+
-+/* I2C_CFG register bit field */
-+#define I2C_CFG_ADDRLEN_8 (7<<5) /* 8 bits */
-+#define I2C_CFG_DEVADLEN_7 (6<<2)
-+#define I2C_CFG_ADDRDIS BIT(1)
-+#define I2C_CFG_DEVADDIS BIT(0)
-+
-+#define I2C_CFG_DEFAULT (I2C_CFG_ADDRLEN_8 | \
-+ I2C_CFG_DEVADLEN_7 | \
-+ I2C_CFG_ADDRDIS)
-+
-+#define I2C_RETRY 0x1000
-+
-+#define CLKDIV_VALUE 333
-+#define i2c_busy_loop (CLKDIV_VALUE*30)
-+
-+#define READ_CMD 0x01
-+#define WRITE_CMD 0x00
-+#define READ_BLOCK 16
-+
-+#define SM0_ODRAIN BIT(31)
-+#define SM0_VSYNC_MODE BIT(28)
-+#define SM0_CLK_DIV (CLKDIV_VALUE << 16)
-+#define SM0_WAIT_LEVEL BIT(6)
-+#define SM0_EN BIT(1)
-+
-+#define SM0_CFG_DEFUALT (SM0_ODRAIN | SM0_VSYNC_MODE | \
-+ SM0_CLK_DIV | SM0_WAIT_LEVEL | \
-+ SM0_EN)
-+/***********************************************************/
-+
-+static void __iomem *membase;
-+static struct i2c_adapter *adapter;
-+
-+static void rt_i2c_w32(u32 val, unsigned reg)
-+{
-+ iowrite32(val, membase + reg);
-+}
-+
-+static u32 rt_i2c_r32(unsigned reg)
-+{
-+ return ioread32(membase + reg);
-+}
-+
-+static void mt7621_i2c_reset(struct i2c_adapter *a)
-+{
-+ device_reset(a->dev.parent);
-+}
-+static void mt7621_i2c_enable(struct i2c_msg *msg)
-+{
-+ rt_i2c_w32(msg->addr,REG_DEVADDR_REG);
-+ rt_i2c_w32(0,REG_ADDR_REG);
-+}
-+
-+static void i2c_master_init(struct i2c_adapter *a)
-+{
-+ mt7621_i2c_reset(a);
-+ rt_i2c_w32(I2C_CFG_DEFAULT,REG_CONFIG_REG);
-+ rt_i2c_w32(SM0_CFG_DEFUALT,REG_SM0CTL0);
-+ rt_i2c_w32(1,REG_SM0_IS_AUTOMODE);//auto mode
-+}
-+
-+
-+static inline int rt_i2c_wait_rx_done(void)
-+{
-+ int i=0;
-+ while((!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY)) && (i<i2c_busy_loop))
-+ i++;
-+ if(i>=i2c_busy_loop){
-+ pr_err("err,wait for idle timeout");
-+ return -ETIMEDOUT;
-+ }
-+ return 0;
-+}
-+
-+static inline int rt_i2c_wait_idle(void)
-+{
-+ int i=0;
-+ while((rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY) && (i<i2c_busy_loop))
-+ i++;
-+ if(i>=i2c_busy_loop){
-+ pr_err("err,wait for idle timeout");
-+ return -ETIMEDOUT;
-+ }
-+ return 0;
-+}
-+
-+static inline int rt_i2c_wait_tx_done(void)
-+{
-+ int i=0;
-+ while((!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY)) && (i<i2c_busy_loop))
-+ i++;
-+ if(i>=i2c_busy_loop){
-+ pr_err("err,wait for idle timeout");
-+ return -ETIMEDOUT;
-+ }
-+ return 0;
-+}
-+
-+static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg)
-+{
-+ int i = 0, j = 0, pos = 0;
-+ int nblock = msg->len / READ_BLOCK;
-+ int rem = msg->len % READ_BLOCK;
-+
-+ if (msg->flags & I2C_M_TEN) {
-+ printk("10 bits addr not supported\n");
-+ return -EINVAL;
-+ }
-+
-+ if (msg->flags & I2C_M_RD) {
-+ for (i = 0; i < nblock; i++) {
-+ if (rt_i2c_wait_idle())
-+ goto err_timeout;
-+ rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG);
-+ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
-+ for (j = 0; j < READ_BLOCK; j++) {
-+ if (rt_i2c_wait_rx_done())
-+ goto err_timeout;
-+ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
-+ }
-+ }
-+
-+ if (rt_i2c_wait_idle())
-+ goto err_timeout;
-+ rt_i2c_w32(rem - 1, REG_BYTECNT_REG);
-+ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG);
-+
-+ for (i = 0; i < rem; i++) {
-+ if (rt_i2c_wait_rx_done())
-+ goto err_timeout;
-+ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG);
-+ }
-+ } else {
-+ if (rt_i2c_wait_idle())
-+ goto err_timeout;
-+ rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG);
-+ for (i = 0; i < msg->len; i++) {
-+ rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG);
-+ if(i == 0)
-+ rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG);
-+
-+ if (rt_i2c_wait_tx_done())
-+ goto err_timeout;
-+ }
-+ }
-+
-+ return 0;
-+err_timeout:
-+ return -ETIMEDOUT;
-+}
-+
-+static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n)
-+{
-+ int i = 0;
-+ int ret = 0;
-+ i2c_master_init(a);
-+ mt7621_i2c_enable(m);
-+
-+ for (i = 0; i != n && ret==0; i++) {
-+ ret = rt_i2c_handle_msg(a, &m[i]);
-+ if (ret)
-+ return ret;
-+ }
-+ return i;
-+}
-+
-+static u32 rt_i2c_func(struct i2c_adapter *a)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static const struct i2c_algorithm rt_i2c_algo = {
-+ .master_xfer = rt_i2c_master_xfer,
-+ .functionality = rt_i2c_func,
-+};
-+
-+static int rt_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ int ret;
-+
-+ adapter = devm_kzalloc(&pdev->dev,sizeof(struct i2c_adapter), GFP_KERNEL);
-+ if (!adapter) {
-+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n");
-+ return -ENOMEM;
-+ }
-+ membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(membase))
-+ return PTR_ERR(membase);
-+
-+ strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name));
-+
-+ adapter->owner = THIS_MODULE;
-+ adapter->nr = pdev->id;
-+ adapter->timeout = HZ;
-+ adapter->algo = &rt_i2c_algo;
-+ adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ adapter->dev.parent = &pdev->dev;
-+ adapter->dev.of_node = pdev->dev.of_node;
-+
-+ platform_set_drvdata(pdev, adapter);
-+
-+ ret = i2c_add_numbered_adapter(adapter);
-+ if (ret)
-+ return ret;
-+
-+ dev_info(&pdev->dev,"loaded");
-+
-+ return 0;
-+}
-+
-+static int rt_i2c_remove(struct platform_device *pdev)
-+{
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static const struct of_device_id i2c_rt_dt_ids[] = {
-+ { .compatible = "ralink,i2c-mt7621", },
-+ { /* sentinel */ }
-+};
-+
-+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids);
-+
-+static struct platform_driver rt_i2c_driver = {
-+ .probe = rt_i2c_probe,
-+ .remove = rt_i2c_remove,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "i2c-mt7621",
-+ .of_match_table = i2c_rt_dt_ids,
-+ },
-+};
-+
-+static int __init i2c_rt_init (void)
-+{
-+ return platform_driver_register(&rt_i2c_driver);
-+}
-+
-+static void __exit i2c_rt_exit (void)
-+{
-+ platform_driver_unregister(&rt_i2c_driver);
-+}
-+module_init (i2c_rt_init);
-+module_exit (i2c_rt_exit);
-+
-+MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>");
-+MODULE_DESCRIPTION("MT7621 I2c host driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:MT7621-I2C");
diff --git a/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
deleted file mode 100644
index 079ce4a3f9..0000000000
--- a/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
+++ /dev/null
@@ -1,4823 +0,0 @@
-From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 13 Nov 2014 19:08:40 +0100
-Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mmc/host/Kconfig | 2 +
- drivers/mmc/host/Makefile | 1 +
- drivers/mmc/host/mtk-mmc/Kconfig | 16 +
- drivers/mmc/host/mtk-mmc/Makefile | 42 +
- drivers/mmc/host/mtk-mmc/board.h | 137 ++
- drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++
- drivers/mmc/host/mtk-mmc/dbg.h | 156 ++
- drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++
- drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++
- 9 files changed, 4762 insertions(+)
- create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig
- create mode 100644 drivers/mmc/host/mtk-mmc/Makefile
- create mode 100644 drivers/mmc/host/mtk-mmc/board.h
- create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c
- create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h
- create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h
- create mode 100644 drivers/mmc/host/mtk-mmc/sd.c
-
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -818,3 +818,5 @@ config MMC_MTK
- If you have a machine with a integrated SD/MMC card reader, say Y or M here.
- This is needed if support for any SD/SDIO/MMC devices is required.
- If unsure, say N.
-+
-+source "drivers/mmc/host/mtk-mmc/Kconfig"
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -2,6 +2,7 @@
- # Makefile for MMC/SD host controller drivers
- #
-
-+obj-$(CONFIG_MTK_MMC) += mtk-mmc/
- obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
- obj-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
- obj-$(CONFIG_MMC_PXA) += pxamci.o
---- /dev/null
-+++ b/drivers/mmc/host/mtk-mmc/Kconfig
-@@ -0,0 +1,16 @@
-+config MTK_MMC
-+ tristate "MTK SD/MMC"
-+ depends on !MTD_NAND_RALINK
-+
-+config MTK_AEE_KDUMP
-+ bool "MTK AEE KDUMP"
-+ depends on MTK_MMC
-+
-+config MTK_MMC_CD_POLL
-+ bool "Card Detect with Polling"
-+ depends on MTK_MMC
-+
-+config MTK_MMC_EMMC_8BIT
-+ bool "eMMC 8-bit support"
-+ depends on MTK_MMC && RALINK_MT7628
-+
---- /dev/null
-+++ b/drivers/mmc/host/mtk-mmc/Makefile
-@@ -0,0 +1,42 @@
-+# Copyright Statement:
-+#
-+# This software/firmware and related documentation ("MediaTek Software") are
-+# protected under relevant copyright laws. The information contained herein
-+# is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+# Without the prior written permission of MediaTek inc. and/or its licensors,
-+# any reproduction, modification, use or disclosure of MediaTek Software,
-+# and information contained herein, in whole or in part, shall be strictly prohibited.
-+#
-+# MediaTek Inc. (C) 2010. All rights reserved.
-+#
-+# BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+# THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+# RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+# AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+# NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+# SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+# SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+# THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+# THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+# CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+# SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+# STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+# CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+# AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+# OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+# MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+#
-+# The following software/firmware and/or related documentation ("MediaTek Software")
-+# have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+# applicable license agreements with MediaTek Inc.
-+
-+obj-$(CONFIG_MTK_MMC) += mtk_sd.o
-+mtk_sd-objs := sd.o dbg.o
-+ifeq ($(CONFIG_MTK_AEE_KDUMP),y)
-+EXTRA_CFLAGS += -DMT6575_SD_DEBUG
-+endif
-+
-+clean:
-+ @rm -f *.o modules.order .*.cmd
---- /dev/null
-+++ b/drivers/mmc/host/mtk-mmc/board.h
-@@ -0,0 +1,137 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#ifndef __ARCH_ARM_MACH_BOARD_H
-+#define __ARCH_ARM_MACH_BOARD_H
-+
-+#include <generated/autoconf.h>
-+#include <linux/pm.h>
-+/* --- chhung */
-+// #include <mach/mt6575.h>
-+// #include <board-custom.h>
-+/* end of chhung */
-+
-+typedef void (*sdio_irq_handler_t)(void*); /* external irq handler */
-+typedef void (*pm_callback_t)(pm_message_t state, void *data);
-+
-+#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */
-+#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */
-+#define MSDC_RST_PIN_EN (1 << 2) /* emmc reset pin is wired */
-+#define MSDC_SDIO_IRQ (1 << 3) /* use internal sdio irq (bus) */
-+#define MSDC_EXT_SDIO_IRQ (1 << 4) /* use external sdio irq */
-+#define MSDC_REMOVABLE (1 << 5) /* removable slot */
-+#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */
-+#define MSDC_HIGHSPEED (1 << 7) /* high-speed mode support */
-+#define MSDC_UHS1 (1 << 8) /* uhs-1 mode support */
-+#define MSDC_DDR (1 << 9) /* ddr mode support */
-+
-+
-+#define MSDC_SMPL_RISING (0)
-+#define MSDC_SMPL_FALLING (1)
-+
-+#define MSDC_CMD_PIN (0)
-+#define MSDC_DAT_PIN (1)
-+#define MSDC_CD_PIN (2)
-+#define MSDC_WP_PIN (3)
-+#define MSDC_RST_PIN (4)
-+
-+enum {
-+ MSDC_CLKSRC_48MHZ = 0,
-+// MSDC_CLKSRC_26MHZ = 0,
-+// MSDC_CLKSRC_197MHZ = 1,
-+// MSDC_CLKSRC_208MHZ = 2
-+};
-+
-+struct msdc_hw {
-+ unsigned char clk_src; /* host clock source */
-+ unsigned char cmd_edge; /* command latch edge */
-+ unsigned char data_edge; /* data latch edge */
-+ unsigned char clk_drv; /* clock pad driving */
-+ unsigned char cmd_drv; /* command pad driving */
-+ unsigned char dat_drv; /* data pad driving */
-+ unsigned long flags; /* hardware capability flags */
-+ unsigned long data_pins; /* data pins */
-+ unsigned long data_offset; /* data address offset */
-+
-+ /* config gpio pull mode */
-+ void (*config_gpio_pin)(int type, int pull);
-+
-+ /* external power control for card */
-+ void (*ext_power_on)(void);
-+ void (*ext_power_off)(void);
-+
-+ /* external sdio irq operations */
-+ void (*request_sdio_eirq)(sdio_irq_handler_t sdio_irq_handler, void *data);
-+ void (*enable_sdio_eirq)(void);
-+ void (*disable_sdio_eirq)(void);
-+
-+ /* external cd irq operations */
-+ void (*request_cd_eirq)(sdio_irq_handler_t cd_irq_handler, void *data);
-+ void (*enable_cd_eirq)(void);
-+ void (*disable_cd_eirq)(void);
-+ int (*get_cd_status)(void);
-+
-+ /* power management callback for external module */
-+ void (*register_pm)(pm_callback_t pm_cb, void *data);
-+};
-+
-+extern struct msdc_hw msdc0_hw;
-+extern struct msdc_hw msdc1_hw;
-+extern struct msdc_hw msdc2_hw;
-+extern struct msdc_hw msdc3_hw;
-+
-+/*GPS driver*/
-+#define GPS_FLAG_FORCE_OFF 0x0001
-+struct mt3326_gps_hardware {
-+ int (*ext_power_on)(int);
-+ int (*ext_power_off)(int);
-+};
-+extern struct mt3326_gps_hardware mt3326_gps_hw;
-+
-+/* NAND driver */
-+struct mt6575_nand_host_hw {
-+ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */
-+ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */
-+ unsigned int nfi_cs_num; /* NFI_CS_NUM */
-+ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */
-+ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */
-+ unsigned int nand_ecc_size;
-+ unsigned int nand_ecc_bytes;
-+ unsigned int nand_ecc_mode;
-+};
-+extern struct mt6575_nand_host_hw mt6575_nand_hw;
-+
-+#endif /* __ARCH_ARM_MACH_BOARD_H */
-+
---- /dev/null
-+++ b/drivers/mmc/host/mtk-mmc/dbg.c
-@@ -0,0 +1,347 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ *
-+ * MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/kthread.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/proc_fs.h>
-+#include <linux/string.h>
-+#include <linux/uaccess.h>
-+// #include <mach/mt6575_gpt.h> /* --- by chhung */
-+#include "dbg.h"
-+#include "mt6575_sd.h"
-+#include <linux/seq_file.h>
-+
-+static char cmd_buf[256];
-+
-+/* for debug zone */
-+unsigned int sd_debug_zone[4]={
-+ 0,
-+ 0,
-+ 0,
-+ 0
-+};
-+
-+/* mode select */
-+u32 dma_size[4]={
-+ 512,
-+ 512,
-+ 512,
-+ 512
-+};
-+msdc_mode drv_mode[4]={
-+ MODE_SIZE_DEP, /* using DMA or not depend on the size */
-+ MODE_SIZE_DEP,
-+ MODE_SIZE_DEP,
-+ MODE_SIZE_DEP
-+};
-+
-+#if defined (MT6575_SD_DEBUG)
-+/* for driver profile */
-+#define TICKS_ONE_MS (13000)
-+u32 gpt_enable = 0;
-+u32 sdio_pro_enable = 0; /* make sure gpt is enabled */
-+u32 sdio_pro_time = 0; /* no more than 30s */
-+struct sdio_profile sdio_perfomance = {0};
-+
-+#if 0 /* --- chhung */
-+void msdc_init_gpt(void)
-+{
-+ GPT_CONFIG config;
-+
-+ config.num = GPT6;
-+ config.mode = GPT_FREE_RUN;
-+ config.clkSrc = GPT_CLK_SRC_SYS;
-+ config.clkDiv = GPT_CLK_DIV_1; /* 13MHz GPT6 */
-+
-+ if (GPT_Config(config) == FALSE )
-+ return;
-+
-+ GPT_Start(GPT6);
-+}
-+#endif /* end of --- */
-+
-+u32 msdc_time_calc(u32 old_L32, u32 old_H32, u32 new_L32, u32 new_H32)
-+{
-+ u32 ret = 0;
-+
-+ if (new_H32 == old_H32) {
-+ ret = new_L32 - old_L32;
-+ } else if(new_H32 == (old_H32 + 1)) {
-+ if (new_L32 > old_L32) {
-+ printk("msdc old_L<0x%x> new_L<0x%x>\n", old_L32, new_L32);
-+ }
-+ ret = (0xffffffff - old_L32);
-+ ret += new_L32;
-+ } else {
-+ printk("msdc old_H<0x%x> new_H<0x%x>\n", old_H32, new_H32);
-+ }
-+
-+ return ret;
-+}
-+
-+void msdc_sdio_profile(struct sdio_profile* result)
-+{
-+ struct cmd_profile* cmd;
-+ u32 i;
-+
-+ printk("sdio === performance dump ===\n");
-+ printk("sdio === total execute tick<%d> time<%dms> Tx<%dB> Rx<%dB>\n",
-+ result->total_tc, result->total_tc / TICKS_ONE_MS,
-+ result->total_tx_bytes, result->total_rx_bytes);
-+
-+ /* CMD52 Dump */
-+ cmd = &result->cmd52_rx;
-+ printk("sdio === CMD52 Rx <%d>times tick<%d> Max<%d> Min<%d> Aver<%d>\n", cmd->count, cmd->tot_tc,
-+ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count);
-+ cmd = &result->cmd52_tx;
-+ printk("sdio === CMD52 Tx <%d>times tick<%d> Max<%d> Min<%d> Aver<%d>\n", cmd->count, cmd->tot_tc,
-+ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count);
-+
-+ /* CMD53 Rx bytes + block mode */
-+ for (i=0; i<512; i++) {
-+ cmd = &result->cmd53_rx_byte[i];
-+ if (cmd->count) {
-+ printk("sdio<%6d><%3dB>_Rx_<%9d><%9d><%6d><%6d>_<%9dB><%2dM>\n", cmd->count, i, cmd->tot_tc,
-+ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count,
-+ cmd->tot_bytes, (cmd->tot_bytes/10)*13 / (cmd->tot_tc/10));
-+ }
-+ }
-+ for (i=0; i<100; i++) {
-+ cmd = &result->cmd53_rx_blk[i];
-+ if (cmd->count) {
-+ printk("sdio<%6d><%3d>B_Rx_<%9d><%9d><%6d><%6d>_<%9dB><%2dM>\n", cmd->count, i, cmd->tot_tc,
-+ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count,
-+ cmd->tot_bytes, (cmd->tot_bytes/10)*13 / (cmd->tot_tc/10));
-+ }
-+ }
-+
-+ /* CMD53 Tx bytes + block mode */
-+ for (i=0; i<512; i++) {
-+ cmd = &result->cmd53_tx_byte[i];
-+ if (cmd->count) {
-+ printk("sdio<%6d><%3dB>_Tx_<%9d><%9d><%6d><%6d>_<%9dB><%2dM>\n", cmd->count, i, cmd->tot_tc,
-+ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count,
-+ cmd->tot_bytes, (cmd->tot_bytes/10)*13 / (cmd->tot_tc/10));
-+ }
-+ }
-+ for (i=0; i<100; i++) {
-+ cmd = &result->cmd53_tx_blk[i];
-+ if (cmd->count) {
-+ printk("sdio<%6d><%3d>B_Tx_<%9d><%9d><%6d><%6d>_<%9dB><%2dM>\n", cmd->count, i, cmd->tot_tc,
-+ cmd->max_tc, cmd->min_tc, cmd->tot_tc/cmd->count,
-+ cmd->tot_bytes, (cmd->tot_bytes/10)*13 / (cmd->tot_tc/10));
-+ }
-+ }
-+
-+ printk("sdio === performance dump done ===\n");
-+}
-+
-+//========= sdio command table ===========
-+void msdc_performance(u32 opcode, u32 sizes, u32 bRx, u32 ticks)
-+{
-+ struct sdio_profile* result = &sdio_perfomance;
-+ struct cmd_profile* cmd;
-+ u32 block;
-+
-+ if (sdio_pro_enable == 0) {
-+ return;
-+ }
-+
-+ if (opcode == 52) {
-+ cmd = bRx ? &result->cmd52_rx : &result->cmd52_tx;
-+ } else if (opcode == 53) {
-+ if (sizes < 512) {
-+ cmd = bRx ? &result->cmd53_rx_byte[sizes] : &result->cmd53_tx_byte[sizes];
-+ } else {
-+ block = sizes / 512;
-+ if (block >= 99) {
-+ printk("cmd53 error blocks\n");
-+ while(1);
-+ }
-+ cmd = bRx ? &result->cmd53_rx_blk[block] : &result->cmd53_tx_blk[block];
-+ }
-+ } else {
-+ return;
-+ }
-+
-+ /* update the members */
-+ if (ticks > cmd->max_tc){
-+ cmd->max_tc = ticks;
-+ }
-+ if (cmd->min_tc == 0 || ticks < cmd->min_tc) {
-+ cmd->min_tc = ticks;
-+ }
-+ cmd->tot_tc += ticks;
-+ cmd->tot_bytes += sizes;
-+ cmd->count ++;
-+
-+ if (bRx) {
-+ result->total_rx_bytes += sizes;
-+ } else {
-+ result->total_tx_bytes += sizes;
-+ }
-+ result->total_tc += ticks;
-+
-+ /* dump when total_tc > 30s */
-+ if (result->total_tc >= sdio_pro_time * TICKS_ONE_MS * 1000) {
-+ msdc_sdio_profile(result);
-+ memset(result, 0 , sizeof(struct sdio_profile));
-+ }
-+}
-+
-+//========== driver proc interface ===========
-+static int msdc_debug_proc_read(struct seq_file *s, void *p)
-+{
-+ seq_printf(s, "\n=========================================\n");
-+ seq_printf(s, "Index<0> + Id + Zone\n");
-+ seq_printf(s, "-> PWR<9> WRN<8> | FIO<7> OPS<6> FUN<5> CFG<4> | INT<3> RSP<2> CMD<1> DMA<0>\n");
-+ seq_printf(s, "-> echo 0 3 0x3ff >msdc_bebug -> host[3] debug zone set to 0x3ff\n");
-+ seq_printf(s, "-> MSDC[0] Zone: 0x%.8x\n", sd_debug_zone[0]);
-+ seq_printf(s, "-> MSDC[1] Zone: 0x%.8x\n", sd_debug_zone[1]);
-+ seq_printf(s, "-> MSDC[2] Zone: 0x%.8x\n", sd_debug_zone[2]);
-+ seq_printf(s, "-> MSDC[3] Zone: 0x%.8x\n", sd_debug_zone[3]);
-+
-+ seq_printf(s, "Index<1> + ID:4|Mode:4 + DMA_SIZE\n");
-+ seq_printf(s, "-> 0)PIO 1)DMA 2)SIZE\n");
-+ seq_printf(s, "-> echo 1 22 0x200 >msdc_bebug -> host[2] size mode, dma when >= 512\n");
-+ seq_printf(s, "-> MSDC[0] mode<%d> size<%d>\n", drv_mode[0], dma_size[0]);
-+ seq_printf(s, "-> MSDC[1] mode<%d> size<%d>\n", drv_mode[1], dma_size[1]);
-+ seq_printf(s, "-> MSDC[2] mode<%d> size<%d>\n", drv_mode[2], dma_size[2]);
-+ seq_printf(s, "-> MSDC[3] mode<%d> size<%d>\n", drv_mode[3], dma_size[3]);
-+
-+ seq_printf(s, "Index<3> + SDIO_PROFILE + TIME\n");
-+ seq_printf(s, "-> echo 3 1 0x1E >msdc_bebug -> enable sdio_profile, 30s\n");
-+ seq_printf(s, "-> SDIO_PROFILE<%d> TIME<%ds>\n", sdio_pro_enable, sdio_pro_time);
-+ seq_printf(s, "=========================================\n\n");
-+
-+ return 0;
-+}
-+
-+static ssize_t msdc_debug_proc_write(struct file *file,
-+ const char __user *buf, size_t count, loff_t *data)
-+{
-+ int ret;
-+
-+ int cmd, p1, p2;
-+ int id, zone;
-+ int mode, size;
-+
-+ if (count == 0)return -1;
-+ if(count > 255)count = 255;
-+
-+ ret = copy_from_user(cmd_buf, buf, count);
-+ if (ret < 0)return -1;
-+
-+ cmd_buf[count] = '\0';
-+ printk("msdc Write %s\n", cmd_buf);
-+
-+ sscanf(cmd_buf, "%x %x %x", &cmd, &p1, &p2);
-+
-+ if(cmd == SD_TOOL_ZONE) {
-+ id = p1; zone = p2; zone &= 0x3ff;
-+ printk("msdc host_id<%d> zone<0x%.8x>\n", id, zone);
-+ if(id >=0 && id<=3){
-+ sd_debug_zone[id] = zone;
-+ }
-+ else if(id == 4){
-+ sd_debug_zone[0] = sd_debug_zone[1] = zone;
-+ sd_debug_zone[2] = sd_debug_zone[3] = zone;
-+ }
-+ else{
-+ printk("msdc host_id error when set debug zone\n");
-+ }
-+ } else if (cmd == SD_TOOL_DMA_SIZE) {
-+ id = p1>>4; mode = (p1&0xf); size = p2;
-+ if(id >=0 && id<=3){
-+ drv_mode[id] = mode;
-+ dma_size[id] = p2;
-+ }
-+ else if(id == 4){
-+ drv_mode[0] = drv_mode[1] = mode;
-+ drv_mode[2] = drv_mode[3] = mode;
-+ dma_size[0] = dma_size[1] = p2;
-+ dma_size[2] = dma_size[3] = p2;
-+ }
-+ else{
-+ printk("msdc host_id error when select mode\n");
-+ }
-+ } else if (cmd == SD_TOOL_SDIO_PROFILE) {
-+ if (p1 == 1) { /* enable profile */
-+ if (gpt_enable == 0) {
-+ // msdc_init_gpt(); /* --- by chhung */
-+ gpt_enable = 1;
-+ }
-+ sdio_pro_enable = 1;
-+ if (p2 == 0) p2 = 1; if (p2 >= 30) p2 = 30;
-+ sdio_pro_time = p2 ;
-+ } else if (p1 == 0) {
-+ /* todo */
-+ sdio_pro_enable = 0;
-+ }
-+ }
-+
-+ return count;
-+}
-+
-+static int msdc_debug_show(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, msdc_debug_proc_read, NULL);
-+}
-+
-+static const struct file_operations msdc_debug_fops = {
-+ .owner = THIS_MODULE,
-+ .open = msdc_debug_show,
-+ .read = seq_read,
-+ .write = msdc_debug_proc_write,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+int msdc_debug_proc_init(void)
-+{
-+ struct proc_dir_entry *de = proc_create("msdc_debug", 0667, NULL, &msdc_debug_fops);
-+
-+ if (!de || IS_ERR(de))
-+ printk("!! Create MSDC debug PROC fail !!\n");
-+
-+ return 0 ;
-+}
-+EXPORT_SYMBOL_GPL(msdc_debug_proc_init);
-+#endif
---- /dev/null
-+++ b/drivers/mmc/host/mtk-mmc/dbg.h
-@@ -0,0 +1,156 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ *
-+ * MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+#ifndef __MT_MSDC_DEUBG__
-+#define __MT_MSDC_DEUBG__
-+
-+//==========================
-+extern u32 sdio_pro_enable;
-+/* for a type command, e.g. CMD53, 2 blocks */
-+struct cmd_profile {
-+ u32 max_tc; /* Max tick count */
-+ u32 min_tc;
-+ u32 tot_tc; /* total tick count */
-+ u32 tot_bytes;
-+ u32 count; /* the counts of the command */
-+};
-+
-+/* dump when total_tc and total_bytes */
-+struct sdio_profile {
-+ u32 total_tc; /* total tick count of CMD52 and CMD53 */
-+ u32 total_tx_bytes; /* total bytes of CMD53 Tx */
-+ u32 total_rx_bytes; /* total bytes of CMD53 Rx */
-+
-+ /*CMD52*/
-+ struct cmd_profile cmd52_tx;
-+ struct cmd_profile cmd52_rx;
-+
-+ /*CMD53 in byte unit */
-+ struct cmd_profile cmd53_tx_byte[512];
-+ struct cmd_profile cmd53_rx_byte[512];
-+
-+ /*CMD53 in block unit */
-+ struct cmd_profile cmd53_tx_blk[100];
-+ struct cmd_profile cmd53_rx_blk[100];
-+};
-+
-+//==========================
-+typedef enum {
-+ SD_TOOL_ZONE = 0,
-+ SD_TOOL_DMA_SIZE = 1,
-+ SD_TOOL_PM_ENABLE = 2,
-+ SD_TOOL_SDIO_PROFILE = 3,
-+} msdc_dbg;
-+
-+typedef enum {
-+ MODE_PIO = 0,
-+ MODE_DMA = 1,
-+ MODE_SIZE_DEP = 2,
-+} msdc_mode;
-+extern msdc_mode drv_mode[4];
-+extern u32 dma_size[4];
-+
-+/* Debug message event */
-+#define DBG_EVT_NONE (0) /* No event */
-+#define DBG_EVT_DMA (1 << 0) /* DMA related event */
-+#define DBG_EVT_CMD (1 << 1) /* MSDC CMD related event */
-+#define DBG_EVT_RSP (1 << 2) /* MSDC CMD RSP related event */
-+#define DBG_EVT_INT (1 << 3) /* MSDC INT event */
-+#define DBG_EVT_CFG (1 << 4) /* MSDC CFG event */
-+#define DBG_EVT_FUC (1 << 5) /* Function event */
-+#define DBG_EVT_OPS (1 << 6) /* Read/Write operation event */
-+#define DBG_EVT_FIO (1 << 7) /* FIFO operation event */
-+#define DBG_EVT_WRN (1 << 8) /* Warning event */
-+#define DBG_EVT_PWR (1 << 9) /* Power event */
-+#define DBG_EVT_ALL (0xffffffff)
-+
-+#define DBG_EVT_MASK (DBG_EVT_ALL)
-+
-+extern unsigned int sd_debug_zone[4];
-+#define TAG "msdc"
-+#if 0 /* +++ chhung */
-+#define BUG_ON(x) \
-+do { \
-+ if (x) { \
-+ printk("[BUG] %s LINE:%d FILE:%s\n", #x, __LINE__, __FILE__); \
-+ while(1); \
-+ } \
-+}while(0)
-+#endif /* end of +++ */
-+
-+#define N_MSG(evt, fmt, args...)
-+/*
-+do { \
-+ if ((DBG_EVT_##evt) & sd_debug_zone[host->id]) { \
-+ printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
-+ host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
-+ } \
-+} while(0)
-+*/
-+
-+#define ERR_MSG(fmt, args...) \
-+do { \
-+ printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
-+ host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
-+} while(0);
-+
-+#if 1
-+//defined CONFIG_MTK_MMC_CD_POLL
-+#define INIT_MSG(fmt, args...)
-+#define IRQ_MSG(fmt, args...)
-+#else
-+#define INIT_MSG(fmt, args...) \
-+do { \
-+ printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d> PID<%s><0x%x>\n", \
-+ host->id, ##args , __FUNCTION__, __LINE__, current->comm, current->pid); \
-+} while(0);
-+
-+/* PID in ISR in not corrent */
-+#define IRQ_MSG(fmt, args...) \
-+do { \
-+ printk(KERN_ERR TAG"%d -> "fmt" <- %s() : L<%d>\n", \
-+ host->id, ##args , __FUNCTION__, __LINE__); \
-+} while(0);
-+#endif
-+
-+int msdc_debug_proc_init(void);
-+
-+#if 0 /* --- chhung */
-+void msdc_init_gpt(void);
-+extern void GPT_GetCounter64(UINT32 *cntL32, UINT32 *cntH32);
-+#endif /* end of --- */
-+u32 msdc_time_calc(u32 old_L32, u32 old_H32, u32 new_L32, u32 new_H32);
-+void msdc_performance(u32 opcode, u32 sizes, u32 bRx, u32 ticks);
-+
-+#endif
---- /dev/null
-+++ b/drivers/mmc/host/mtk-mmc/mt6575_sd.h
-@@ -0,0 +1,1001 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ */
-+/* MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#ifndef MT6575_SD_H
-+#define MT6575_SD_H
-+
-+#include <linux/bitops.h>
-+#include <linux/mmc/host.h>
-+
-+// #include <mach/mt6575_reg_base.h> /* --- by chhung */
-+
-+/*--------------------------------------------------------------------------*/
-+/* Common Macro */
-+/*--------------------------------------------------------------------------*/
-+#define REG_ADDR(x) ((volatile u32*)(base + OFFSET_##x))
-+
-+/*--------------------------------------------------------------------------*/
-+/* Common Definition */
-+/*--------------------------------------------------------------------------*/
-+#define MSDC_FIFO_SZ (128)
-+#define MSDC_FIFO_THD (64) // (128)
-+#define MSDC_NUM (4)
-+
-+#define MSDC_MS (0)
-+#define MSDC_SDMMC (1)
-+
-+#define MSDC_MODE_UNKNOWN (0)
-+#define MSDC_MODE_PIO (1)
-+#define MSDC_MODE_DMA_BASIC (2)
-+#define MSDC_MODE_DMA_DESC (3)
-+#define MSDC_MODE_DMA_ENHANCED (4)
-+#define MSDC_MODE_MMC_STREAM (5)
-+
-+#define MSDC_BUS_1BITS (0)
-+#define MSDC_BUS_4BITS (1)
-+#define MSDC_BUS_8BITS (2)
-+
-+#define MSDC_BRUST_8B (3)
-+#define MSDC_BRUST_16B (4)
-+#define MSDC_BRUST_32B (5)
-+#define MSDC_BRUST_64B (6)
-+
-+#define MSDC_PIN_PULL_NONE (0)
-+#define MSDC_PIN_PULL_DOWN (1)
-+#define MSDC_PIN_PULL_UP (2)
-+#define MSDC_PIN_KEEP (3)
-+
-+#define MSDC_MAX_SCLK (48000000) /* +/- by chhung */
-+#define MSDC_MIN_SCLK (260000)
-+
-+#define MSDC_AUTOCMD12 (0x0001)
-+#define MSDC_AUTOCMD23 (0x0002)
-+#define MSDC_AUTOCMD19 (0x0003)
-+
-+#define MSDC_EMMC_BOOTMODE0 (0) /* Pull low CMD mode */
-+#define MSDC_EMMC_BOOTMODE1 (1) /* Reset CMD mode */
-+
-+enum {
-+ RESP_NONE = 0,
-+ RESP_R1,
-+ RESP_R2,
-+ RESP_R3,
-+ RESP_R4,
-+ RESP_R5,
-+ RESP_R6,
-+ RESP_R7,
-+ RESP_R1B
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+/* Register Offset */
-+/*--------------------------------------------------------------------------*/
-+#define OFFSET_MSDC_CFG (0x0)
-+#define OFFSET_MSDC_IOCON (0x04)
-+#define OFFSET_MSDC_PS (0x08)
-+#define OFFSET_MSDC_INT (0x0c)
-+#define OFFSET_MSDC_INTEN (0x10)
-+#define OFFSET_MSDC_FIFOCS (0x14)
-+#define OFFSET_MSDC_TXDATA (0x18)
-+#define OFFSET_MSDC_RXDATA (0x1c)
-+#define OFFSET_SDC_CFG (0x30)
-+#define OFFSET_SDC_CMD (0x34)
-+#define OFFSET_SDC_ARG (0x38)
-+#define OFFSET_SDC_STS (0x3c)
-+#define OFFSET_SDC_RESP0 (0x40)
-+#define OFFSET_SDC_RESP1 (0x44)
-+#define OFFSET_SDC_RESP2 (0x48)
-+#define OFFSET_SDC_RESP3 (0x4c)
-+#define OFFSET_SDC_BLK_NUM (0x50)
-+#define OFFSET_SDC_CSTS (0x58)
-+#define OFFSET_SDC_CSTS_EN (0x5c)
-+#define OFFSET_SDC_DCRC_STS (0x60)
-+#define OFFSET_EMMC_CFG0 (0x70)
-+#define OFFSET_EMMC_CFG1 (0x74)
-+#define OFFSET_EMMC_STS (0x78)
-+#define OFFSET_EMMC_IOCON (0x7c)
-+#define OFFSET_SDC_ACMD_RESP (0x80)
-+#define OFFSET_SDC_ACMD19_TRG (0x84)
-+#define OFFSET_SDC_ACMD19_STS (0x88)
-+#define OFFSET_MSDC_DMA_SA (0x90)
-+#define OFFSET_MSDC_DMA_CA (0x94)
-+#define OFFSET_MSDC_DMA_CTRL (0x98)
-+#define OFFSET_MSDC_DMA_CFG (0x9c)
-+#define OFFSET_MSDC_DBG_SEL (0xa0)
-+#define OFFSET_MSDC_DBG_OUT (0xa4)
-+#define OFFSET_MSDC_PATCH_BIT (0xb0)
-+#define OFFSET_MSDC_PATCH_BIT1 (0xb4)
-+#define OFFSET_MSDC_PAD_CTL0 (0xe0)
-+#define OFFSET_MSDC_PAD_CTL1 (0xe4)
-+#define OFFSET_MSDC_PAD_CTL2 (0xe8)
-+#define OFFSET_MSDC_PAD_TUNE (0xec)
-+#define OFFSET_MSDC_DAT_RDDLY0 (0xf0)
-+#define OFFSET_MSDC_DAT_RDDLY1 (0xf4)
-+#define OFFSET_MSDC_HW_DBG (0xf8)
-+#define OFFSET_MSDC_VERSION (0x100)
-+#define OFFSET_MSDC_ECO_VER (0x104)
-+
-+/*--------------------------------------------------------------------------*/
-+/* Register Address */
-+/*--------------------------------------------------------------------------*/
-+
-+/* common register */
-+#define MSDC_CFG REG_ADDR(MSDC_CFG)
-+#define MSDC_IOCON REG_ADDR(MSDC_IOCON)
-+#define MSDC_PS REG_ADDR(MSDC_PS)
-+#define MSDC_INT REG_ADDR(MSDC_INT)
-+#define MSDC_INTEN REG_ADDR(MSDC_INTEN)
-+#define MSDC_FIFOCS REG_ADDR(MSDC_FIFOCS)
-+#define MSDC_TXDATA REG_ADDR(MSDC_TXDATA)
-+#define MSDC_RXDATA REG_ADDR(MSDC_RXDATA)
-+#define MSDC_PATCH_BIT0 REG_ADDR(MSDC_PATCH_BIT)
-+
-+/* sdmmc register */
-+#define SDC_CFG REG_ADDR(SDC_CFG)
-+#define SDC_CMD REG_ADDR(SDC_CMD)
-+#define SDC_ARG REG_ADDR(SDC_ARG)
-+#define SDC_STS REG_ADDR(SDC_STS)
-+#define SDC_RESP0 REG_ADDR(SDC_RESP0)
-+#define SDC_RESP1 REG_ADDR(SDC_RESP1)
-+#define SDC_RESP2 REG_ADDR(SDC_RESP2)
-+#define SDC_RESP3 REG_ADDR(SDC_RESP3)
-+#define SDC_BLK_NUM REG_ADDR(SDC_BLK_NUM)
-+#define SDC_CSTS REG_ADDR(SDC_CSTS)
-+#define SDC_CSTS_EN REG_ADDR(SDC_CSTS_EN)
-+#define SDC_DCRC_STS REG_ADDR(SDC_DCRC_STS)
-+
-+/* emmc register*/
-+#define EMMC_CFG0 REG_ADDR(EMMC_CFG0)
-+#define EMMC_CFG1 REG_ADDR(EMMC_CFG1)
-+#define EMMC_STS REG_ADDR(EMMC_STS)
-+#define EMMC_IOCON REG_ADDR(EMMC_IOCON)
-+
-+/* auto command register */
-+#define SDC_ACMD_RESP REG_ADDR(SDC_ACMD_RESP)
-+#define SDC_ACMD19_TRG REG_ADDR(SDC_ACMD19_TRG)
-+#define SDC_ACMD19_STS REG_ADDR(SDC_ACMD19_STS)
-+
-+/* dma register */
-+#define MSDC_DMA_SA REG_ADDR(MSDC_DMA_SA)
-+#define MSDC_DMA_CA REG_ADDR(MSDC_DMA_CA)
-+#define MSDC_DMA_CTRL REG_ADDR(MSDC_DMA_CTRL)
-+#define MSDC_DMA_CFG REG_ADDR(MSDC_DMA_CFG)
-+
-+/* pad ctrl register */
-+#define MSDC_PAD_CTL0 REG_ADDR(MSDC_PAD_CTL0)
-+#define MSDC_PAD_CTL1 REG_ADDR(MSDC_PAD_CTL1)
-+#define MSDC_PAD_CTL2 REG_ADDR(MSDC_PAD_CTL2)
-+
-+/* data read delay */
-+#define MSDC_DAT_RDDLY0 REG_ADDR(MSDC_DAT_RDDLY0)
-+#define MSDC_DAT_RDDLY1 REG_ADDR(MSDC_DAT_RDDLY1)
-+
-+/* debug register */
-+#define MSDC_DBG_SEL REG_ADDR(MSDC_DBG_SEL)
-+#define MSDC_DBG_OUT REG_ADDR(MSDC_DBG_OUT)
-+
-+/* misc register */
-+#define MSDC_PATCH_BIT REG_ADDR(MSDC_PATCH_BIT)
-+#define MSDC_PATCH_BIT1 REG_ADDR(MSDC_PATCH_BIT1)
-+#define MSDC_PAD_TUNE REG_ADDR(MSDC_PAD_TUNE)
-+#define MSDC_HW_DBG REG_ADDR(MSDC_HW_DBG)
-+#define MSDC_VERSION REG_ADDR(MSDC_VERSION)
-+#define MSDC_ECO_VER REG_ADDR(MSDC_ECO_VER) /* ECO Version */
-+
-+/*--------------------------------------------------------------------------*/
-+/* Register Mask */
-+/*--------------------------------------------------------------------------*/
-+
-+/* MSDC_CFG mask */
-+#define MSDC_CFG_MODE (0x1 << 0) /* RW */
-+#define MSDC_CFG_CKPDN (0x1 << 1) /* RW */
-+#define MSDC_CFG_RST (0x1 << 2) /* RW */
-+#define MSDC_CFG_PIO (0x1 << 3) /* RW */
-+#define MSDC_CFG_CKDRVEN (0x1 << 4) /* RW */
-+#define MSDC_CFG_BV18SDT (0x1 << 5) /* RW */
-+#define MSDC_CFG_BV18PSS (0x1 << 6) /* R */
-+#define MSDC_CFG_CKSTB (0x1 << 7) /* R */
-+#define MSDC_CFG_CKDIV (0xff << 8) /* RW */
-+#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */
-+
-+/* MSDC_IOCON mask */
-+#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */
-+#define MSDC_IOCON_RSPL (0x1 << 1) /* RW */
-+#define MSDC_IOCON_DSPL (0x1 << 2) /* RW */
-+#define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */
-+#define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */
-+#define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */
-+#define MSDC_IOCON_D0SPL (0x1 << 16) /* RW */
-+#define MSDC_IOCON_D1SPL (0x1 << 17) /* RW */
-+#define MSDC_IOCON_D2SPL (0x1 << 18) /* RW */
-+#define MSDC_IOCON_D3SPL (0x1 << 19) /* RW */
-+#define MSDC_IOCON_D4SPL (0x1 << 20) /* RW */
-+#define MSDC_IOCON_D5SPL (0x1 << 21) /* RW */
-+#define MSDC_IOCON_D6SPL (0x1 << 22) /* RW */
-+#define MSDC_IOCON_D7SPL (0x1 << 23) /* RW */
-+#define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */
-+
-+/* MSDC_PS mask */
-+#define MSDC_PS_CDEN (0x1 << 0) /* RW */
-+#define MSDC_PS_CDSTS (0x1 << 1) /* R */
-+#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
-+#define MSDC_PS_DAT (0xff << 16) /* R */
-+#define MSDC_PS_CMD (0x1 << 24) /* R */
-+#define MSDC_PS_WP (0x1UL<< 31) /* R */
-+
-+/* MSDC_INT mask */
-+#define MSDC_INT_MMCIRQ (0x1 << 0) /* W1C */
-+#define MSDC_INT_CDSC (0x1 << 1) /* W1C */
-+#define MSDC_INT_ACMDRDY (0x1 << 3) /* W1C */
-+#define MSDC_INT_ACMDTMO (0x1 << 4) /* W1C */
-+#define MSDC_INT_ACMDCRCERR (0x1 << 5) /* W1C */
-+#define MSDC_INT_DMAQ_EMPTY (0x1 << 6) /* W1C */
-+#define MSDC_INT_SDIOIRQ (0x1 << 7) /* W1C */
-+#define MSDC_INT_CMDRDY (0x1 << 8) /* W1C */
-+#define MSDC_INT_CMDTMO (0x1 << 9) /* W1C */
-+#define MSDC_INT_RSPCRCERR (0x1 << 10) /* W1C */
-+#define MSDC_INT_CSTA (0x1 << 11) /* R */
-+#define MSDC_INT_XFER_COMPL (0x1 << 12) /* W1C */
-+#define MSDC_INT_DXFER_DONE (0x1 << 13) /* W1C */
-+#define MSDC_INT_DATTMO (0x1 << 14) /* W1C */
-+#define MSDC_INT_DATCRCERR (0x1 << 15) /* W1C */
-+#define MSDC_INT_ACMD19_DONE (0x1 << 16) /* W1C */
-+
-+/* MSDC_INTEN mask */
-+#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
-+#define MSDC_INTEN_CDSC (0x1 << 1) /* RW */
-+#define MSDC_INTEN_ACMDRDY (0x1 << 3) /* RW */
-+#define MSDC_INTEN_ACMDTMO (0x1 << 4) /* RW */
-+#define MSDC_INTEN_ACMDCRCERR (0x1 << 5) /* RW */
-+#define MSDC_INTEN_DMAQ_EMPTY (0x1 << 6) /* RW */
-+#define MSDC_INTEN_SDIOIRQ (0x1 << 7) /* RW */
-+#define MSDC_INTEN_CMDRDY (0x1 << 8) /* RW */
-+#define MSDC_INTEN_CMDTMO (0x1 << 9) /* RW */
-+#define MSDC_INTEN_RSPCRCERR (0x1 << 10) /* RW */
-+#define MSDC_INTEN_CSTA (0x1 << 11) /* RW */
-+#define MSDC_INTEN_XFER_COMPL (0x1 << 12) /* RW */
-+#define MSDC_INTEN_DXFER_DONE (0x1 << 13) /* RW */
-+#define MSDC_INTEN_DATTMO (0x1 << 14) /* RW */
-+#define MSDC_INTEN_DATCRCERR (0x1 << 15) /* RW */
-+#define MSDC_INTEN_ACMD19_DONE (0x1 << 16) /* RW */
-+
-+/* MSDC_FIFOCS mask */
-+#define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */
-+#define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */
-+#define MSDC_FIFOCS_CLR (0x1UL<< 31) /* RW */
-+
-+/* SDC_CFG mask */
-+#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
-+#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
-+#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
-+#define SDC_CFG_SDIO (0x1 << 19) /* RW */
-+#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
-+#define SDC_CFG_INTATGAP (0x1 << 21) /* RW */
-+#define SDC_CFG_DTOC (0xffUL << 24) /* RW */
-+
-+/* SDC_CMD mask */
-+#define SDC_CMD_OPC (0x3f << 0) /* RW */
-+#define SDC_CMD_BRK (0x1 << 6) /* RW */
-+#define SDC_CMD_RSPTYP (0x7 << 7) /* RW */
-+#define SDC_CMD_DTYP (0x3 << 11) /* RW */
-+#define SDC_CMD_DTYP (0x3 << 11) /* RW */
-+#define SDC_CMD_RW (0x1 << 13) /* RW */
-+#define SDC_CMD_STOP (0x1 << 14) /* RW */
-+#define SDC_CMD_GOIRQ (0x1 << 15) /* RW */
-+#define SDC_CMD_BLKLEN (0xfff<< 16) /* RW */
-+#define SDC_CMD_AUTOCMD (0x3 << 28) /* RW */
-+#define SDC_CMD_VOLSWTH (0x1 << 30) /* RW */
-+
-+/* SDC_STS mask */
-+#define SDC_STS_SDCBUSY (0x1 << 0) /* RW */
-+#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */
-+#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */
-+
-+/* SDC_DCRC_STS mask */
-+#define SDC_DCRC_STS_NEG (0xf << 8) /* RO */
-+#define SDC_DCRC_STS_POS (0xff << 0) /* RO */
-+
-+/* EMMC_CFG0 mask */
-+#define EMMC_CFG0_BOOTSTART (0x1 << 0) /* W */
-+#define EMMC_CFG0_BOOTSTOP (0x1 << 1) /* W */
-+#define EMMC_CFG0_BOOTMODE (0x1 << 2) /* RW */
-+#define EMMC_CFG0_BOOTACKDIS (0x1 << 3) /* RW */
-+#define EMMC_CFG0_BOOTWDLY (0x7 << 12) /* RW */
-+#define EMMC_CFG0_BOOTSUPP (0x1 << 15) /* RW */
-+
-+/* EMMC_CFG1 mask */
-+#define EMMC_CFG1_BOOTDATTMC (0xfffff << 0) /* RW */
-+#define EMMC_CFG1_BOOTACKTMC (0xfffUL << 20) /* RW */
-+
-+/* EMMC_STS mask */
-+#define EMMC_STS_BOOTCRCERR (0x1 << 0) /* W1C */
-+#define EMMC_STS_BOOTACKERR (0x1 << 1) /* W1C */
-+#define EMMC_STS_BOOTDATTMO (0x1 << 2) /* W1C */
-+#define EMMC_STS_BOOTACKTMO (0x1 << 3) /* W1C */
-+#define EMMC_STS_BOOTUPSTATE (0x1 << 4) /* R */
-+#define EMMC_STS_BOOTACKRCV (0x1 << 5) /* W1C */
-+#define EMMC_STS_BOOTDATRCV (0x1 << 6) /* R */
-+
-+/* EMMC_IOCON mask */
-+#define EMMC_IOCON_BOOTRST (0x1 << 0) /* RW */
-+
-+/* SDC_ACMD19_TRG mask */
-+#define SDC_ACMD19_TRG_TUNESEL (0xf << 0) /* RW */
-+
-+/* MSDC_DMA_CTRL mask */
-+#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */
-+#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */
-+#define MSDC_DMA_CTRL_RESUME (0x1 << 2) /* W */
-+#define MSDC_DMA_CTRL_MODE (0x1 << 8) /* RW */
-+#define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) /* RW */
-+#define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */
-+#define MSDC_DMA_CTRL_XFERSZ (0xffffUL << 16)/* RW */
-+
-+/* MSDC_DMA_CFG mask */
-+#define MSDC_DMA_CFG_STS (0x1 << 0) /* R */
-+#define MSDC_DMA_CFG_DECSEN (0x1 << 1) /* RW */
-+#define MSDC_DMA_CFG_BDCSERR (0x1 << 4) /* R */
-+#define MSDC_DMA_CFG_GPDCSERR (0x1 << 5) /* R */
-+
-+/* MSDC_PATCH_BIT mask */
-+#define MSDC_PATCH_BIT_WFLSMODE (0x1 << 0) /* RW */
-+#define MSDC_PATCH_BIT_ODDSUPP (0x1 << 1) /* RW */
-+#define MSDC_PATCH_BIT_CKGEN_CK (0x1 << 6) /* E2: Fixed to 1 */
-+#define MSDC_PATCH_BIT_IODSSEL (0x1 << 16) /* RW */
-+#define MSDC_PATCH_BIT_IOINTSEL (0x1 << 17) /* RW */
-+#define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */
-+#define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */
-+#define MSDC_PATCH_BIT_IDRTSEL (0x1 << 26) /* RW */
-+#define MSDC_PATCH_BIT_CMDFSEL (0x1 << 27) /* RW */
-+#define MSDC_PATCH_BIT_INTDLSEL (0x1 << 28) /* RW */
-+#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
-+#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
-+
-+/* MSDC_PATCH_BIT1 mask */
-+#define MSDC_PATCH_BIT1_WRDAT_CRCS (0x7 << 3)
-+#define MSDC_PATCH_BIT1_CMD_RSP (0x7 << 0)
-+
-+/* MSDC_PAD_CTL0 mask */
-+#define MSDC_PAD_CTL0_CLKDRVN (0x7 << 0) /* RW */
-+#define MSDC_PAD_CTL0_CLKDRVP (0x7 << 4) /* RW */
-+#define MSDC_PAD_CTL0_CLKSR (0x1 << 8) /* RW */
-+#define MSDC_PAD_CTL0_CLKPD (0x1 << 16) /* RW */
-+#define MSDC_PAD_CTL0_CLKPU (0x1 << 17) /* RW */
-+#define MSDC_PAD_CTL0_CLKSMT (0x1 << 18) /* RW */
-+#define MSDC_PAD_CTL0_CLKIES (0x1 << 19) /* RW */
-+#define MSDC_PAD_CTL0_CLKTDSEL (0xf << 20) /* RW */
-+#define MSDC_PAD_CTL0_CLKRDSEL (0xffUL<< 24) /* RW */
-+
-+/* MSDC_PAD_CTL1 mask */
-+#define MSDC_PAD_CTL1_CMDDRVN (0x7 << 0) /* RW */
-+#define MSDC_PAD_CTL1_CMDDRVP (0x7 << 4) /* RW */
-+#define MSDC_PAD_CTL1_CMDSR (0x1 << 8) /* RW */
-+#define MSDC_PAD_CTL1_CMDPD (0x1 << 16) /* RW */
-+#define MSDC_PAD_CTL1_CMDPU (0x1 << 17) /* RW */
-+#define MSDC_PAD_CTL1_CMDSMT (0x1 << 18) /* RW */
-+#define MSDC_PAD_CTL1_CMDIES (0x1 << 19) /* RW */
-+#define MSDC_PAD_CTL1_CMDTDSEL (0xf << 20) /* RW */
-+#define MSDC_PAD_CTL1_CMDRDSEL (0xffUL<< 24) /* RW */
-+
-+/* MSDC_PAD_CTL2 mask */
-+#define MSDC_PAD_CTL2_DATDRVN (0x7 << 0) /* RW */
-+#define MSDC_PAD_CTL2_DATDRVP (0x7 << 4) /* RW */
-+#define MSDC_PAD_CTL2_DATSR (0x1 << 8) /* RW */
-+#define MSDC_PAD_CTL2_DATPD (0x1 << 16) /* RW */
-+#define MSDC_PAD_CTL2_DATPU (0x1 << 17) /* RW */
-+#define MSDC_PAD_CTL2_DATIES (0x1 << 19) /* RW */
-+#define MSDC_PAD_CTL2_DATSMT (0x1 << 18) /* RW */
-+#define MSDC_PAD_CTL2_DATTDSEL (0xf << 20) /* RW */
-+#define MSDC_PAD_CTL2_DATRDSEL (0xffUL<< 24) /* RW */
-+
-+/* MSDC_PAD_TUNE mask */
-+#define MSDC_PAD_TUNE_DATWRDLY (0x1F << 0) /* RW */
-+#define MSDC_PAD_TUNE_DATRRDLY (0x1F << 8) /* RW */
-+#define MSDC_PAD_TUNE_CMDRDLY (0x1F << 16) /* RW */
-+#define MSDC_PAD_TUNE_CMDRRDLY (0x1FUL << 22) /* RW */
-+#define MSDC_PAD_TUNE_CLKTXDLY (0x1FUL << 27) /* RW */
-+
-+/* MSDC_DAT_RDDLY0/1 mask */
-+#define MSDC_DAT_RDDLY0_D0 (0x1F << 0) /* RW */
-+#define MSDC_DAT_RDDLY0_D1 (0x1F << 8) /* RW */
-+#define MSDC_DAT_RDDLY0_D2 (0x1F << 16) /* RW */
-+#define MSDC_DAT_RDDLY0_D3 (0x1F << 24) /* RW */
-+
-+#define MSDC_DAT_RDDLY1_D4 (0x1F << 0) /* RW */
-+#define MSDC_DAT_RDDLY1_D5 (0x1F << 8) /* RW */
-+#define MSDC_DAT_RDDLY1_D6 (0x1F << 16) /* RW */
-+#define MSDC_DAT_RDDLY1_D7 (0x1F << 24) /* RW */
-+
-+#define MSDC_CKGEN_MSDC_DLY_SEL (0x1F<<10)
-+#define MSDC_INT_DAT_LATCH_CK_SEL (0x7<<7)
-+#define MSDC_CKGEN_MSDC_CK_SEL (0x1<<6)
-+#define CARD_READY_FOR_DATA (1<<8)
-+#define CARD_CURRENT_STATE(x) ((x&0x00001E00)>>9)
-+
-+/*--------------------------------------------------------------------------*/
-+/* Descriptor Structure */
-+/*--------------------------------------------------------------------------*/
-+typedef struct {
-+ u32 hwo:1; /* could be changed by hw */
-+ u32 bdp:1;
-+ u32 rsv0:6;
-+ u32 chksum:8;
-+ u32 intr:1;
-+ u32 rsv1:15;
-+ void *next;
-+ void *ptr;
-+ u32 buflen:16;
-+ u32 extlen:8;
-+ u32 rsv2:8;
-+ u32 arg;
-+ u32 blknum;
-+ u32 cmd;
-+} gpd_t;
-+
-+typedef struct {
-+ u32 eol:1;
-+ u32 rsv0:7;
-+ u32 chksum:8;
-+ u32 rsv1:1;
-+ u32 blkpad:1;
-+ u32 dwpad:1;
-+ u32 rsv2:13;
-+ void *next;
-+ void *ptr;
-+ u32 buflen:16;
-+ u32 rsv3:16;
-+} bd_t;
-+
-+/*--------------------------------------------------------------------------*/
-+/* Register Debugging Structure */
-+/*--------------------------------------------------------------------------*/
-+
-+typedef struct {
-+ u32 msdc:1;
-+ u32 ckpwn:1;
-+ u32 rst:1;
-+ u32 pio:1;
-+ u32 ckdrven:1;
-+ u32 start18v:1;
-+ u32 pass18v:1;
-+ u32 ckstb:1;
-+ u32 ckdiv:8;
-+ u32 ckmod:2;
-+ u32 pad:14;
-+} msdc_cfg_reg;
-+typedef struct {
-+ u32 sdr104cksel:1;
-+ u32 rsmpl:1;
-+ u32 dsmpl:1;
-+ u32 ddlysel:1;
-+ u32 ddr50ckd:1;
-+ u32 dsplsel:1;
-+ u32 pad1:10;
-+ u32 d0spl:1;
-+ u32 d1spl:1;
-+ u32 d2spl:1;
-+ u32 d3spl:1;
-+ u32 d4spl:1;
-+ u32 d5spl:1;
-+ u32 d6spl:1;
-+ u32 d7spl:1;
-+ u32 riscsz:1;
-+ u32 pad2:7;
-+} msdc_iocon_reg;
-+typedef struct {
-+ u32 cden:1;
-+ u32 cdsts:1;
-+ u32 pad1:10;
-+ u32 cddebounce:4;
-+ u32 dat:8;
-+ u32 cmd:1;
-+ u32 pad2:6;
-+ u32 wp:1;
-+} msdc_ps_reg;
-+typedef struct {
-+ u32 mmcirq:1;
-+ u32 cdsc:1;
-+ u32 pad1:1;
-+ u32 atocmdrdy:1;
-+ u32 atocmdtmo:1;
-+ u32 atocmdcrc:1;
-+ u32 dmaqempty:1;
-+ u32 sdioirq:1;
-+ u32 cmdrdy:1;
-+ u32 cmdtmo:1;
-+ u32 rspcrc:1;
-+ u32 csta:1;
-+ u32 xfercomp:1;
-+ u32 dxferdone:1;
-+ u32 dattmo:1;
-+ u32 datcrc:1;
-+ u32 atocmd19done:1;
-+ u32 pad2:15;
-+} msdc_int_reg;
-+typedef struct {
-+ u32 mmcirq:1;
-+ u32 cdsc:1;
-+ u32 pad1:1;
-+ u32 atocmdrdy:1;
-+ u32 atocmdtmo:1;
-+ u32 atocmdcrc:1;
-+ u32 dmaqempty:1;
-+ u32 sdioirq:1;
-+ u32 cmdrdy:1;
-+ u32 cmdtmo:1;
-+ u32 rspcrc:1;
-+ u32 csta:1;
-+ u32 xfercomp:1;
-+ u32 dxferdone:1;
-+ u32 dattmo:1;
-+ u32 datcrc:1;
-+ u32 atocmd19done:1;
-+ u32 pad2:15;
-+} msdc_inten_reg;
-+typedef struct {
-+ u32 rxcnt:8;
-+ u32 pad1:8;
-+ u32 txcnt:8;
-+ u32 pad2:7;
-+ u32 clr:1;
-+} msdc_fifocs_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_txdat_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_rxdat_reg;
-+typedef struct {
-+ u32 sdiowkup:1;
-+ u32 inswkup:1;
-+ u32 pad1:14;
-+ u32 buswidth:2;
-+ u32 pad2:1;
-+ u32 sdio:1;
-+ u32 sdioide:1;
-+ u32 intblkgap:1;
-+ u32 pad4:2;
-+ u32 dtoc:8;
-+} sdc_cfg_reg;
-+typedef struct {
-+ u32 cmd:6;
-+ u32 brk:1;
-+ u32 rsptyp:3;
-+ u32 pad1:1;
-+ u32 dtype:2;
-+ u32 rw:1;
-+ u32 stop:1;
-+ u32 goirq:1;
-+ u32 blklen:12;
-+ u32 atocmd:2;
-+ u32 volswth:1;
-+ u32 pad2:1;
-+} sdc_cmd_reg;
-+typedef struct {
-+ u32 arg;
-+} sdc_arg_reg;
-+typedef struct {
-+ u32 sdcbusy:1;
-+ u32 cmdbusy:1;
-+ u32 pad:29;
-+ u32 swrcmpl:1;
-+} sdc_sts_reg;
-+typedef struct {
-+ u32 val;
-+} sdc_resp0_reg;
-+typedef struct {
-+ u32 val;
-+} sdc_resp1_reg;
-+typedef struct {
-+ u32 val;
-+} sdc_resp2_reg;
-+typedef struct {
-+ u32 val;
-+} sdc_resp3_reg;
-+typedef struct {
-+ u32 num;
-+} sdc_blknum_reg;
-+typedef struct {
-+ u32 sts;
-+} sdc_csts_reg;
-+typedef struct {
-+ u32 sts;
-+} sdc_cstsen_reg;
-+typedef struct {
-+ u32 datcrcsts:8;
-+ u32 ddrcrcsts:4;
-+ u32 pad:20;
-+} sdc_datcrcsts_reg;
-+typedef struct {
-+ u32 bootstart:1;
-+ u32 bootstop:1;
-+ u32 bootmode:1;
-+ u32 pad1:9;
-+ u32 bootwaidly:3;
-+ u32 bootsupp:1;
-+ u32 pad2:16;
-+} emmc_cfg0_reg;
-+typedef struct {
-+ u32 bootcrctmc:16;
-+ u32 pad:4;
-+ u32 bootacktmc:12;
-+} emmc_cfg1_reg;
-+typedef struct {
-+ u32 bootcrcerr:1;
-+ u32 bootackerr:1;
-+ u32 bootdattmo:1;
-+ u32 bootacktmo:1;
-+ u32 bootupstate:1;
-+ u32 bootackrcv:1;
-+ u32 bootdatrcv:1;
-+ u32 pad:25;
-+} emmc_sts_reg;
-+typedef struct {
-+ u32 bootrst:1;
-+ u32 pad:31;
-+} emmc_iocon_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_acmd_resp_reg;
-+typedef struct {
-+ u32 tunesel:4;
-+ u32 pad:28;
-+} msdc_acmd19_trg_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_acmd19_sts_reg;
-+typedef struct {
-+ u32 addr;
-+} msdc_dma_sa_reg;
-+typedef struct {
-+ u32 addr;
-+} msdc_dma_ca_reg;
-+typedef struct {
-+ u32 start:1;
-+ u32 stop:1;
-+ u32 resume:1;
-+ u32 pad1:5;
-+ u32 mode:1;
-+ u32 pad2:1;
-+ u32 lastbuf:1;
-+ u32 pad3:1;
-+ u32 brustsz:3;
-+ u32 pad4:1;
-+ u32 xfersz:16;
-+} msdc_dma_ctrl_reg;
-+typedef struct {
-+ u32 status:1;
-+ u32 decsen:1;
-+ u32 pad1:2;
-+ u32 bdcsen:1;
-+ u32 gpdcsen:1;
-+ u32 pad2:26;
-+} msdc_dma_cfg_reg;
-+typedef struct {
-+ u32 sel:16;
-+ u32 pad2:16;
-+} msdc_dbg_sel_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_dbg_out_reg;
-+typedef struct {
-+ u32 clkdrvn:3;
-+ u32 rsv0:1;
-+ u32 clkdrvp:3;
-+ u32 rsv1:1;
-+ u32 clksr:1;
-+ u32 rsv2:7;
-+ u32 clkpd:1;
-+ u32 clkpu:1;
-+ u32 clksmt:1;
-+ u32 clkies:1;
-+ u32 clktdsel:4;
-+ u32 clkrdsel:8;
-+} msdc_pad_ctl0_reg;
-+typedef struct {
-+ u32 cmddrvn:3;
-+ u32 rsv0:1;
-+ u32 cmddrvp:3;
-+ u32 rsv1:1;
-+ u32 cmdsr:1;
-+ u32 rsv2:7;
-+ u32 cmdpd:1;
-+ u32 cmdpu:1;
-+ u32 cmdsmt:1;
-+ u32 cmdies:1;
-+ u32 cmdtdsel:4;
-+ u32 cmdrdsel:8;
-+} msdc_pad_ctl1_reg;
-+typedef struct {
-+ u32 datdrvn:3;
-+ u32 rsv0:1;
-+ u32 datdrvp:3;
-+ u32 rsv1:1;
-+ u32 datsr:1;
-+ u32 rsv2:7;
-+ u32 datpd:1;
-+ u32 datpu:1;
-+ u32 datsmt:1;
-+ u32 daties:1;
-+ u32 dattdsel:4;
-+ u32 datrdsel:8;
-+} msdc_pad_ctl2_reg;
-+typedef struct {
-+ u32 wrrxdly:3;
-+ u32 pad1:5;
-+ u32 rdrxdly:8;
-+ u32 pad2:16;
-+} msdc_pad_tune_reg;
-+typedef struct {
-+ u32 dat0:5;
-+ u32 rsv0:3;
-+ u32 dat1:5;
-+ u32 rsv1:3;
-+ u32 dat2:5;
-+ u32 rsv2:3;
-+ u32 dat3:5;
-+ u32 rsv3:3;
-+} msdc_dat_rddly0;
-+typedef struct {
-+ u32 dat4:5;
-+ u32 rsv4:3;
-+ u32 dat5:5;
-+ u32 rsv5:3;
-+ u32 dat6:5;
-+ u32 rsv6:3;
-+ u32 dat7:5;
-+ u32 rsv7:3;
-+} msdc_dat_rddly1;
-+typedef struct {
-+ u32 dbg0sel:8;
-+ u32 dbg1sel:6;
-+ u32 pad1:2;
-+ u32 dbg2sel:6;
-+ u32 pad2:2;
-+ u32 dbg3sel:6;
-+ u32 pad3:2;
-+} msdc_hw_dbg_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_version_reg;
-+typedef struct {
-+ u32 val;
-+} msdc_eco_ver_reg;
-+
-+struct msdc_regs {
-+ msdc_cfg_reg msdc_cfg; /* base+0x00h */
-+ msdc_iocon_reg msdc_iocon; /* base+0x04h */
-+ msdc_ps_reg msdc_ps; /* base+0x08h */
-+ msdc_int_reg msdc_int; /* base+0x0ch */
-+ msdc_inten_reg msdc_inten; /* base+0x10h */
-+ msdc_fifocs_reg msdc_fifocs; /* base+0x14h */
-+ msdc_txdat_reg msdc_txdat; /* base+0x18h */
-+ msdc_rxdat_reg msdc_rxdat; /* base+0x1ch */
-+ u32 rsv1[4];
-+ sdc_cfg_reg sdc_cfg; /* base+0x30h */
-+ sdc_cmd_reg sdc_cmd; /* base+0x34h */
-+ sdc_arg_reg sdc_arg; /* base+0x38h */
-+ sdc_sts_reg sdc_sts; /* base+0x3ch */
-+ sdc_resp0_reg sdc_resp0; /* base+0x40h */
-+ sdc_resp1_reg sdc_resp1; /* base+0x44h */
-+ sdc_resp2_reg sdc_resp2; /* base+0x48h */
-+ sdc_resp3_reg sdc_resp3; /* base+0x4ch */
-+ sdc_blknum_reg sdc_blknum; /* base+0x50h */
-+ u32 rsv2[1];
-+ sdc_csts_reg sdc_csts; /* base+0x58h */
-+ sdc_cstsen_reg sdc_cstsen; /* base+0x5ch */
-+ sdc_datcrcsts_reg sdc_dcrcsta; /* base+0x60h */
-+ u32 rsv3[3];
-+ emmc_cfg0_reg emmc_cfg0; /* base+0x70h */
-+ emmc_cfg1_reg emmc_cfg1; /* base+0x74h */
-+ emmc_sts_reg emmc_sts; /* base+0x78h */
-+ emmc_iocon_reg emmc_iocon; /* base+0x7ch */
-+ msdc_acmd_resp_reg acmd_resp; /* base+0x80h */
-+ msdc_acmd19_trg_reg acmd19_trg; /* base+0x84h */
-+ msdc_acmd19_sts_reg acmd19_sts; /* base+0x88h */
-+ u32 rsv4[1];
-+ msdc_dma_sa_reg dma_sa; /* base+0x90h */
-+ msdc_dma_ca_reg dma_ca; /* base+0x94h */
-+ msdc_dma_ctrl_reg dma_ctrl; /* base+0x98h */
-+ msdc_dma_cfg_reg dma_cfg; /* base+0x9ch */
-+ msdc_dbg_sel_reg dbg_sel; /* base+0xa0h */
-+ msdc_dbg_out_reg dbg_out; /* base+0xa4h */
-+ u32 rsv5[2];
-+ u32 patch0; /* base+0xb0h */
-+ u32 patch1; /* base+0xb4h */
-+ u32 rsv6[10];
-+ msdc_pad_ctl0_reg pad_ctl0; /* base+0xe0h */
-+ msdc_pad_ctl1_reg pad_ctl1; /* base+0xe4h */
-+ msdc_pad_ctl2_reg pad_ctl2; /* base+0xe8h */
-+ msdc_pad_tune_reg pad_tune; /* base+0xech */
-+ msdc_dat_rddly0 dat_rddly0; /* base+0xf0h */
-+ msdc_dat_rddly1 dat_rddly1; /* base+0xf4h */
-+ msdc_hw_dbg_reg hw_dbg; /* base+0xf8h */
-+ u32 rsv7[1];
-+ msdc_version_reg version; /* base+0x100h */
-+ msdc_eco_ver_reg eco_ver; /* base+0x104h */
-+};
-+
-+struct scatterlist_ex {
-+ u32 cmd;
-+ u32 arg;
-+ u32 sglen;
-+ struct scatterlist *sg;
-+};
-+
-+#define DMA_FLAG_NONE (0x00000000)
-+#define DMA_FLAG_EN_CHKSUM (0x00000001)
-+#define DMA_FLAG_PAD_BLOCK (0x00000002)
-+#define DMA_FLAG_PAD_DWORD (0x00000004)
-+
-+struct msdc_dma {
-+ u32 flags; /* flags */
-+ u32 xfersz; /* xfer size in bytes */
-+ u32 sglen; /* size of scatter list */
-+ u32 blklen; /* block size */
-+ struct scatterlist *sg; /* I/O scatter list */
-+ struct scatterlist_ex *esg; /* extended I/O scatter list */
-+ u8 mode; /* dma mode */
-+ u8 burstsz; /* burst size */
-+ u8 intr; /* dma done interrupt */
-+ u8 padding; /* padding */
-+ u32 cmd; /* enhanced mode command */
-+ u32 arg; /* enhanced mode arg */
-+ u32 rsp; /* enhanced mode command response */
-+ u32 autorsp; /* auto command response */
-+
-+ gpd_t *gpd; /* pointer to gpd array */
-+ bd_t *bd; /* pointer to bd array */
-+ dma_addr_t gpd_addr; /* the physical address of gpd array */
-+ dma_addr_t bd_addr; /* the physical address of bd array */
-+ u32 used_gpd; /* the number of used gpd elements */
-+ u32 used_bd; /* the number of used bd elements */
-+};
-+
-+struct msdc_host
-+{
-+ struct msdc_hw *hw;
-+
-+ struct mmc_host *mmc; /* mmc structure */
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+ struct mmc_request *mrq;
-+ int cmd_rsp;
-+ int cmd_rsp_done;
-+ int cmd_r1b_done;
-+
-+ int error;
-+ spinlock_t lock; /* mutex */
-+ struct semaphore sem;
-+
-+ u32 blksz; /* host block size */
-+ u32 base; /* host base address */
-+ int id; /* host id */
-+ int pwr_ref; /* core power reference count */
-+
-+ u32 xfer_size; /* total transferred size */
-+
-+ struct msdc_dma dma; /* dma channel */
-+ u32 dma_addr; /* dma transfer address */
-+ u32 dma_left_size; /* dma transfer left size */
-+ u32 dma_xfer_size; /* dma transfer size in bytes */
-+ int dma_xfer; /* dma transfer mode */
-+
-+ u32 timeout_ns; /* data timeout ns */
-+ u32 timeout_clks; /* data timeout clks */
-+
-+ atomic_t abort; /* abort transfer */
-+
-+ int irq; /* host interrupt */
-+
-+ struct tasklet_struct card_tasklet;
-+#if 0
-+ struct work_struct card_workqueue;
-+#else
-+ struct delayed_work card_delaywork;
-+#endif
-+
-+ struct completion cmd_done;
-+ struct completion xfer_done;
-+ struct pm_message pm_state;
-+
-+ u32 mclk; /* mmc subsystem clock */
-+ u32 hclk; /* host clock speed */
-+ u32 sclk; /* SD/MS clock speed */
-+ u8 core_clkon; /* Host core clock on ? */
-+ u8 card_clkon; /* Card clock on ? */
-+ u8 core_power; /* core power */
-+ u8 power_mode; /* host power mode */
-+ u8 card_inserted; /* card inserted ? */
-+ u8 suspend; /* host suspended ? */
-+ u8 reserved;
-+ u8 app_cmd; /* for app command */
-+ u32 app_cmd_arg;
-+ u64 starttime;
-+};
-+
-+static inline unsigned int uffs(unsigned int x)
-+{
-+ unsigned int r = 1;
-+
-+ if (!x)
-+ return 0;
-+ if (!(x & 0xffff)) {
-+ x >>= 16;
-+ r += 16;
-+ }
-+ if (!(x & 0xff)) {
-+ x >>= 8;
-+ r += 8;
-+ }
-+ if (!(x & 0xf)) {
-+ x >>= 4;
-+ r += 4;
-+ }
-+ if (!(x & 3)) {
-+ x >>= 2;
-+ r += 2;
-+ }
-+ if (!(x & 1)) {
-+ x >>= 1;
-+ r += 1;
-+ }
-+ return r;
-+}
-+#define sdr_read8(reg) __raw_readb(reg)
-+#define sdr_read16(reg) __raw_readw(reg)
-+#define sdr_read32(reg) __raw_readl(reg)
-+#define sdr_write8(reg,val) __raw_writeb(val,reg)
-+#define sdr_write16(reg,val) __raw_writew(val,reg)
-+#define sdr_write32(reg,val) __raw_writel(val,reg)
-+
-+#define sdr_set_bits(reg,bs) ((*(volatile u32*)(reg)) |= (u32)(bs))
-+#define sdr_clr_bits(reg,bs) ((*(volatile u32*)(reg)) &= ~((u32)(bs)))
-+
-+#define sdr_set_field(reg,field,val) \
-+ do { \
-+ volatile unsigned int tv = sdr_read32(reg); \
-+ tv &= ~(field); \
-+ tv |= ((val) << (uffs((unsigned int)field) - 1)); \
-+ sdr_write32(reg,tv); \
-+ } while(0)
-+#define sdr_get_field(reg,field,val) \
-+ do { \
-+ volatile unsigned int tv = sdr_read32(reg); \
-+ val = ((tv & (field)) >> (uffs((unsigned int)field) - 1)); \
-+ } while(0)
-+
-+#endif
-+
---- /dev/null
-+++ b/drivers/mmc/host/mtk-mmc/sd.c
-@@ -0,0 +1,3060 @@
-+/* Copyright Statement:
-+ *
-+ * This software/firmware and related documentation ("MediaTek Software") are
-+ * protected under relevant copyright laws. The information contained herein
-+ * is confidential and proprietary to MediaTek Inc. and/or its licensors.
-+ * Without the prior written permission of MediaTek inc. and/or its licensors,
-+ * any reproduction, modification, use or disclosure of MediaTek Software,
-+ * and information contained herein, in whole or in part, shall be strictly prohibited.
-+ *
-+ * MediaTek Inc. (C) 2010. All rights reserved.
-+ *
-+ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
-+ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
-+ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON
-+ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
-+ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
-+ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
-+ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH
-+ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES
-+ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES
-+ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK
-+ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
-+ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND
-+ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
-+ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
-+ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO
-+ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
-+ *
-+ * The following software/firmware and/or related documentation ("MediaTek Software")
-+ * have been modified by MediaTek Inc. All revisions are subject to any receiver's
-+ * applicable license agreements with MediaTek Inc.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/timer.h>
-+#include <linux/ioport.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/blkdev.h>
-+#include <linux/slab.h>
-+#include <linux/mmc/host.h>
-+#include <linux/mmc/card.h>
-+#include <linux/mmc/core.h>
-+#include <linux/mmc/mmc.h>
-+#include <linux/mmc/sd.h>
-+#include <linux/mmc/sdio.h>
-+#include <linux/dma-mapping.h>
-+
-+/* +++ by chhung */
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/version.h>
-+#include <linux/pm.h>
-+#include <linux/of.h>
-+
-+#define MSDC_SMPL_FALLING (1)
-+#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */
-+#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */
-+#define MSDC_REMOVABLE (1 << 5) /* removable slot */
-+#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */
-+#define MSDC_HIGHSPEED (1 << 7)
-+
-+//#define IRQ_SDC 14 //MT7620 /*FIXME*/
-+#ifdef CONFIG_SOC_MT7621
-+#define RALINK_SYSCTL_BASE 0xbe000000
-+#define RALINK_MSDC_BASE 0xbe130000
-+#else
-+#define RALINK_SYSCTL_BASE 0xb0000000
-+#define RALINK_MSDC_BASE 0xb0130000
-+#endif
-+#define IRQ_SDC 22 /*FIXME*/
-+
-+#include <asm/dma.h>
-+/* end of +++ */
-+
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#if 0 /* --- by chhung */
-+#include <mach/board.h>
-+#include <mach/mt6575_devs.h>
-+#include <mach/mt6575_typedefs.h>
-+#include <mach/mt6575_clock_manager.h>
-+#include <mach/mt6575_pm_ldo.h>
-+//#include <mach/mt6575_pll.h>
-+//#include <mach/mt6575_gpio.h>
-+//#include <mach/mt6575_gpt_sw.h>
-+#include <asm/tcm.h>
-+// #include <mach/mt6575_gpt.h>
-+#endif /* end of --- */
-+
-+#include "mt6575_sd.h"
-+#include "dbg.h"
-+
-+/* +++ by chhung */
-+#include "board.h"
-+/* end of +++ */
-+
-+#if 0 /* --- by chhung */
-+#define isb() __asm__ __volatile__ ("" : : : "memory")
-+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-+ : : "r" (0) : "memory")
-+#define dmb() __asm__ __volatile__ ("" : : : "memory")
-+#endif /* end of --- */
-+
-+#define DRV_NAME "mtk-sd"
-+
-+#define HOST_MAX_NUM (1) /* +/- by chhung */
-+
-+#if defined (CONFIG_SOC_MT7620)
-+#define HOST_MAX_MCLK (48000000) /* +/- by chhung */
-+#elif defined (CONFIG_SOC_MT7621)
-+#define HOST_MAX_MCLK (50000000) /* +/- by chhung */
-+#endif
-+#define HOST_MIN_MCLK (260000)
-+
-+#define HOST_MAX_BLKSZ (2048)
-+
-+#define MSDC_OCR_AVAIL (MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33)
-+
-+#define GPIO_PULL_DOWN (0)
-+#define GPIO_PULL_UP (1)
-+
-+#if 0 /* --- by chhung */
-+#define MSDC_CLKSRC_REG (0xf100000C)
-+#define PDN_REG (0xF1000010)
-+#endif /* end of --- */
-+
-+#define DEFAULT_DEBOUNCE (8) /* 8 cycles */
-+#define DEFAULT_DTOC (40) /* data timeout counter. 65536x40 sclk. */
-+
-+#define CMD_TIMEOUT (HZ/10) /* 100ms */
-+#define DAT_TIMEOUT (HZ/2 * 5) /* 500ms x5 */
-+
-+#define MAX_DMA_CNT (64 * 1024 - 512) /* a single transaction for WIFI may be 50K*/
-+
-+#define MAX_GPD_NUM (1 + 1) /* one null gpd */
-+#define MAX_BD_NUM (1024)
-+#define MAX_BD_PER_GPD (MAX_BD_NUM)
-+
-+#define MAX_HW_SGMTS (MAX_BD_NUM)
-+#define MAX_PHY_SGMTS (MAX_BD_NUM)
-+#define MAX_SGMT_SZ (MAX_DMA_CNT)
-+#define MAX_REQ_SZ (MAX_SGMT_SZ * 8)
-+
-+#ifdef MT6575_SD_DEBUG
-+static struct msdc_regs *msdc_reg[HOST_MAX_NUM];
-+#endif
-+
-+static int mtk_sw_poll;
-+
-+static int cd_active_low = 1;
-+
-+//=================================
-+#define PERI_MSDC0_PDN (15)
-+//#define PERI_MSDC1_PDN (16)
-+//#define PERI_MSDC2_PDN (17)
-+//#define PERI_MSDC3_PDN (18)
-+
-+struct msdc_host *msdc_6575_host[] = {NULL,NULL,NULL,NULL};
-+#if 0 /* --- by chhung */
-+/* gate means clock power down */
-+static int g_clk_gate = 0;
-+#define msdc_gate_clock(id) \
-+ do { \
-+ g_clk_gate &= ~(1 << ((id) + PERI_MSDC0_PDN)); \
-+ } while(0)
-+/* not like power down register. 1 means clock on. */
-+#define msdc_ungate_clock(id) \
-+ do { \
-+ g_clk_gate |= 1 << ((id) + PERI_MSDC0_PDN); \
-+ } while(0)
-+
-+// do we need sync object or not
-+void msdc_clk_status(int * status)
-+{
-+ *status = g_clk_gate;
-+}
-+#endif /* end of --- */
-+
-+/* +++ by chhung */
-+struct msdc_hw msdc0_hw = {
-+ .clk_src = 0,
-+ .cmd_edge = MSDC_SMPL_FALLING,
-+ .data_edge = MSDC_SMPL_FALLING,
-+ .clk_drv = 4,
-+ .cmd_drv = 4,
-+ .dat_drv = 4,
-+ .data_pins = 4,
-+ .data_offset = 0,
-+ .flags = MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
-+// .flags = MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE,
-+};
-+
-+static struct resource mtk_sd_resources[] = {
-+ [0] = {
-+ .start = RALINK_MSDC_BASE,
-+ .end = RALINK_MSDC_BASE+0x3fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_SDC, /*FIXME*/
-+ .end = IRQ_SDC, /*FIXME*/
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device mtk_sd_device = {
-+ .name = "mtk-sd",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(mtk_sd_resources),
-+ .resource = mtk_sd_resources,
-+};
-+/* end of +++ */
-+
-+static int msdc_rsp[] = {
-+ 0, /* RESP_NONE */
-+ 1, /* RESP_R1 */
-+ 2, /* RESP_R2 */
-+ 3, /* RESP_R3 */
-+ 4, /* RESP_R4 */
-+ 1, /* RESP_R5 */
-+ 1, /* RESP_R6 */
-+ 1, /* RESP_R7 */
-+ 7, /* RESP_R1b */
-+};
-+
-+/* For Inhanced DMA */
-+#define msdc_init_gpd_ex(gpd,extlen,cmd,arg,blknum) \
-+ do { \
-+ ((gpd_t*)gpd)->extlen = extlen; \
-+ ((gpd_t*)gpd)->cmd = cmd; \
-+ ((gpd_t*)gpd)->arg = arg; \
-+ ((gpd_t*)gpd)->blknum = blknum; \
-+ }while(0)
-+
-+#define msdc_init_bd(bd, blkpad, dwpad, dptr, dlen) \
-+ do { \
-+ BUG_ON(dlen > 0xFFFFUL); \
-+ ((bd_t*)bd)->blkpad = blkpad; \
-+ ((bd_t*)bd)->dwpad = dwpad; \
-+ ((bd_t*)bd)->ptr = (void*)dptr; \
-+ ((bd_t*)bd)->buflen = dlen; \
-+ }while(0)
-+
-+#define msdc_txfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16)
-+#define msdc_rxfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) >> 0)
-+#define msdc_fifo_write32(v) sdr_write32(MSDC_TXDATA, (v))
-+#define msdc_fifo_write8(v) sdr_write8(MSDC_TXDATA, (v))
-+#define msdc_fifo_read32() sdr_read32(MSDC_RXDATA)
-+#define msdc_fifo_read8() sdr_read8(MSDC_RXDATA)
-+
-+
-+#define msdc_dma_on() sdr_clr_bits(MSDC_CFG, MSDC_CFG_PIO)
-+#define msdc_dma_off() sdr_set_bits(MSDC_CFG, MSDC_CFG_PIO)
-+
-+#define msdc_retry(expr,retry,cnt) \
-+ do { \
-+ int backup = cnt; \
-+ while (retry) { \
-+ if (!(expr)) break; \
-+ if (cnt-- == 0) { \
-+ retry--; mdelay(1); cnt = backup; \
-+ } \
-+ } \
-+ WARN_ON(retry == 0); \
-+ } while(0)
-+
-+#if 0 /* --- by chhung */
-+#define msdc_reset() \
-+ do { \
-+ int retry = 3, cnt = 1000; \
-+ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
-+ dsb(); \
-+ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
-+ } while(0)
-+#else
-+#define msdc_reset() \
-+ do { \
-+ int retry = 3, cnt = 1000; \
-+ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \
-+ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \
-+ } while(0)
-+#endif /* end of +/- */
-+
-+#define msdc_clr_int() \
-+ do { \
-+ volatile u32 val = sdr_read32(MSDC_INT); \
-+ sdr_write32(MSDC_INT, val); \
-+ } while(0)
-+
-+#define msdc_clr_fifo() \
-+ do { \
-+ int retry = 3, cnt = 1000; \
-+ sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \
-+ msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \
-+ } while(0)
-+
-+#define msdc_irq_save(val) \
-+ do { \
-+ val = sdr_read32(MSDC_INTEN); \
-+ sdr_clr_bits(MSDC_INTEN, val); \
-+ } while(0)
-+
-+#define msdc_irq_restore(val) \
-+ do { \
-+ sdr_set_bits(MSDC_INTEN, val); \
-+ } while(0)
-+
-+/* clock source for host: global */
-+#if defined (CONFIG_SOC_MT7620)
-+static u32 hclks[] = {48000000}; /* +/- by chhung */
-+#elif defined (CONFIG_SOC_MT7621)
-+static u32 hclks[] = {50000000}; /* +/- by chhung */
-+#endif
-+
-+//============================================
-+// the power for msdc host controller: global
-+// always keep the VMC on.
-+//============================================
-+#define msdc_vcore_on(host) \
-+ do { \
-+ INIT_MSG("[+]VMC ref. count<%d>", ++host->pwr_ref); \
-+ (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
-+ } while (0)
-+#define msdc_vcore_off(host) \
-+ do { \
-+ INIT_MSG("[-]VMC ref. count<%d>", --host->pwr_ref); \
-+ (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
-+ } while (0)
-+
-+//====================================
-+// the vdd output for card: global
-+// always keep the VMCH on.
-+//====================================
-+#define msdc_vdd_on(host) \
-+ do { \
-+ (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
-+ } while (0)
-+#define msdc_vdd_off(host) \
-+ do { \
-+ (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
-+ } while (0)
-+
-+#define sdc_is_busy() (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY)
-+#define sdc_is_cmd_busy() (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY)
-+
-+#define sdc_send_cmd(cmd,arg) \
-+ do { \
-+ sdr_write32(SDC_ARG, (arg)); \
-+ sdr_write32(SDC_CMD, (cmd)); \
-+ } while(0)
-+
-+// can modify to read h/w register.
-+//#define is_card_present(h) ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1);
-+#define is_card_present(h) (((struct msdc_host*)(h))->card_inserted)
-+
-+/* +++ by chhung */
-+#ifndef __ASSEMBLY__
-+#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
-+#else
-+#define PHYSADDR(a) ((a) & 0x1fffffff)
-+#endif
-+/* end of +++ */
-+static unsigned int msdc_do_command(struct msdc_host *host,
-+ struct mmc_command *cmd,
-+ int tune,
-+ unsigned long timeout);
-+
-+static int msdc_tune_cmdrsp(struct msdc_host*host,struct mmc_command *cmd);
-+
-+#ifdef MT6575_SD_DEBUG
-+static void msdc_dump_card_status(struct msdc_host *host, u32 status)
-+{
-+ static char *state[] = {
-+ "Idle", /* 0 */
-+ "Ready", /* 1 */
-+ "Ident", /* 2 */
-+ "Stby", /* 3 */
-+ "Tran", /* 4 */
-+ "Data", /* 5 */
-+ "Rcv", /* 6 */
-+ "Prg", /* 7 */
-+ "Dis", /* 8 */
-+ "Reserved", /* 9 */
-+ "Reserved", /* 10 */
-+ "Reserved", /* 11 */
-+ "Reserved", /* 12 */
-+ "Reserved", /* 13 */
-+ "Reserved", /* 14 */
-+ "I/O mode", /* 15 */
-+ };
-+ if (status & R1_OUT_OF_RANGE)
-+ N_MSG(RSP, "[CARD_STATUS] Out of Range");
-+ if (status & R1_ADDRESS_ERROR)
-+ N_MSG(RSP, "[CARD_STATUS] Address Error");
-+ if (status & R1_BLOCK_LEN_ERROR)
-+ N_MSG(RSP, "[CARD_STATUS] Block Len Error");
-+ if (status & R1_ERASE_SEQ_ERROR)
-+ N_MSG(RSP, "[CARD_STATUS] Erase Seq Error");
-+ if (status & R1_ERASE_PARAM)
-+ N_MSG(RSP, "[CARD_STATUS] Erase Param");
-+ if (status & R1_WP_VIOLATION)
-+ N_MSG(RSP, "[CARD_STATUS] WP Violation");
-+ if (status & R1_CARD_IS_LOCKED)
-+ N_MSG(RSP, "[CARD_STATUS] Card is Locked");
-+ if (status & R1_LOCK_UNLOCK_FAILED)
-+ N_MSG(RSP, "[CARD_STATUS] Lock/Unlock Failed");
-+ if (status & R1_COM_CRC_ERROR)
-+ N_MSG(RSP, "[CARD_STATUS] Command CRC Error");
-+ if (status & R1_ILLEGAL_COMMAND)
-+ N_MSG(RSP, "[CARD_STATUS] Illegal Command");
-+ if (status & R1_CARD_ECC_FAILED)
-+ N_MSG(RSP, "[CARD_STATUS] Card ECC Failed");
-+ if (status & R1_CC_ERROR)
-+ N_MSG(RSP, "[CARD_STATUS] CC Error");
-+ if (status & R1_ERROR)
-+ N_MSG(RSP, "[CARD_STATUS] Error");
-+ if (status & R1_UNDERRUN)
-+ N_MSG(RSP, "[CARD_STATUS] Underrun");
-+ if (status & R1_OVERRUN)
-+ N_MSG(RSP, "[CARD_STATUS] Overrun");
-+ if (status & R1_CID_CSD_OVERWRITE)
-+ N_MSG(RSP, "[CARD_STATUS] CID/CSD Overwrite");
-+ if (status & R1_WP_ERASE_SKIP)
-+ N_MSG(RSP, "[CARD_STATUS] WP Eraser Skip");
-+ if (status & R1_CARD_ECC_DISABLED)
-+ N_MSG(RSP, "[CARD_STATUS] Card ECC Disabled");
-+ if (status & R1_ERASE_RESET)
-+ N_MSG(RSP, "[CARD_STATUS] Erase Reset");
-+ if (status & R1_READY_FOR_DATA)
-+ N_MSG(RSP, "[CARD_STATUS] Ready for Data");
-+ if (status & R1_SWITCH_ERROR)
-+ N_MSG(RSP, "[CARD_STATUS] Switch error");
-+ if (status & R1_APP_CMD)
-+ N_MSG(RSP, "[CARD_STATUS] App Command");
-+
-+ N_MSG(RSP, "[CARD_STATUS] '%s' State", state[R1_CURRENT_STATE(status)]);
-+}
-+
-+static void msdc_dump_ocr_reg(struct msdc_host *host, u32 resp)
-+{
-+ if (resp & (1 << 7))
-+ N_MSG(RSP, "[OCR] Low Voltage Range");
-+ if (resp & (1 << 15))
-+ N_MSG(RSP, "[OCR] 2.7-2.8 volt");
-+ if (resp & (1 << 16))
-+ N_MSG(RSP, "[OCR] 2.8-2.9 volt");
-+ if (resp & (1 << 17))
-+ N_MSG(RSP, "[OCR] 2.9-3.0 volt");
-+ if (resp & (1 << 18))
-+ N_MSG(RSP, "[OCR] 3.0-3.1 volt");
-+ if (resp & (1 << 19))
-+ N_MSG(RSP, "[OCR] 3.1-3.2 volt");
-+ if (resp & (1 << 20))
-+ N_MSG(RSP, "[OCR] 3.2-3.3 volt");
-+ if (resp & (1 << 21))
-+ N_MSG(RSP, "[OCR] 3.3-3.4 volt");
-+ if (resp & (1 << 22))
-+ N_MSG(RSP, "[OCR] 3.4-3.5 volt");
-+ if (resp & (1 << 23))
-+ N_MSG(RSP, "[OCR] 3.5-3.6 volt");
-+ if (resp & (1 << 24))
-+ N_MSG(RSP, "[OCR] Switching to 1.8V Accepted (S18A)");
-+ if (resp & (1 << 30))
-+ N_MSG(RSP, "[OCR] Card Capacity Status (CCS)");
-+ if (resp & (1 << 31))
-+ N_MSG(RSP, "[OCR] Card Power Up Status (Idle)");
-+ else
-+ N_MSG(RSP, "[OCR] Card Power Up Status (Busy)");
-+}
-+
-+static void msdc_dump_rca_resp(struct msdc_host *host, u32 resp)
-+{
-+ u32 status = (((resp >> 15) & 0x1) << 23) |
-+ (((resp >> 14) & 0x1) << 22) |
-+ (((resp >> 13) & 0x1) << 19) |
-+ (resp & 0x1fff);
-+
-+ N_MSG(RSP, "[RCA] 0x%.4x", resp >> 16);
-+ msdc_dump_card_status(host, status);
-+}
-+
-+static void msdc_dump_io_resp(struct msdc_host *host, u32 resp)
-+{
-+ u32 flags = (resp >> 8) & 0xFF;
-+ char *state[] = {"DIS", "CMD", "TRN", "RFU"};
-+
-+ if (flags & (1 << 7))
-+ N_MSG(RSP, "[IO] COM_CRC_ERR");
-+ if (flags & (1 << 6))
-+ N_MSG(RSP, "[IO] Illgal command");
-+ if (flags & (1 << 3))
-+ N_MSG(RSP, "[IO] Error");
-+ if (flags & (1 << 2))
-+ N_MSG(RSP, "[IO] RFU");
-+ if (flags & (1 << 1))
-+ N_MSG(RSP, "[IO] Function number error");
-+ if (flags & (1 << 0))
-+ N_MSG(RSP, "[IO] Out of range");
-+
-+ N_MSG(RSP, "[IO] State: %s, Data:0x%x", state[(resp >> 12) & 0x3], resp & 0xFF);
-+}
-+#endif
-+
-+static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
-+{
-+ u32 base = host->base;
-+ u32 timeout, clk_ns;
-+
-+ host->timeout_ns = ns;
-+ host->timeout_clks = clks;
-+
-+ clk_ns = 1000000000UL / host->sclk;
-+ timeout = ns / clk_ns + clks;
-+ timeout = timeout >> 16; /* in 65536 sclk cycle unit */
-+ timeout = timeout > 1 ? timeout - 1 : 0;
-+ timeout = timeout > 255 ? 255 : timeout;
-+
-+ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, timeout);
-+
-+ N_MSG(OPS, "Set read data timeout: %dns %dclks -> %d x 65536 cycles",
-+ ns, clks, timeout + 1);
-+}
-+
-+/* msdc_eirq_sdio() will be called when EIRQ(for WIFI) */
-+static void msdc_eirq_sdio(void *data)
-+{
-+ struct msdc_host *host = (struct msdc_host *)data;
-+
-+ N_MSG(INT, "SDIO EINT");
-+
-+ mmc_signal_sdio_irq(host->mmc);
-+}
-+
-+/* msdc_eirq_cd will not be used! We not using EINT for card detection. */
-+static void msdc_eirq_cd(void *data)
-+{
-+ struct msdc_host *host = (struct msdc_host *)data;
-+
-+ N_MSG(INT, "CD EINT");
-+
-+#if 0
-+ tasklet_hi_schedule(&host->card_tasklet);
-+#else
-+ schedule_delayed_work(&host->card_delaywork, HZ);
-+#endif
-+}
-+
-+#if 0
-+static void msdc_tasklet_card(unsigned long arg)
-+{
-+ struct msdc_host *host = (struct msdc_host *)arg;
-+#else
-+static void msdc_tasklet_card(struct work_struct *work)
-+{
-+ struct msdc_host *host = (struct msdc_host *)container_of(work,
-+ struct msdc_host, card_delaywork.work);
-+#endif
-+ struct msdc_hw *hw = host->hw;
-+ u32 base = host->base;
-+ u32 inserted;
-+ u32 status = 0;
-+ //u32 change = 0;
-+
-+ spin_lock(&host->lock);
-+
-+ if (hw->get_cd_status) { // NULL
-+ inserted = hw->get_cd_status();
-+ } else {
-+ status = sdr_read32(MSDC_PS);
-+ if (cd_active_low)
-+ inserted = (status & MSDC_PS_CDSTS) ? 0 : 1;
-+ else
-+ inserted = (status & MSDC_PS_CDSTS) ? 1 : 0;
-+ }
-+
-+#if 0
-+ change = host->card_inserted ^ inserted;
-+ host->card_inserted = inserted;
-+
-+ if (change && !host->suspend) {
-+ if (inserted) {
-+ host->mmc->f_max = HOST_MAX_MCLK; // work around
-+ }
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(20));
-+ }
-+#else /* Make sure: handle the last interrupt */
-+ host->card_inserted = inserted;
-+
-+ if (!host->suspend) {
-+ host->mmc->f_max = HOST_MAX_MCLK;
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(20));
-+ }
-+
-+ IRQ_MSG("card found<%s>", inserted ? "inserted" : "removed");
-+#endif
-+
-+ spin_unlock(&host->lock);
-+}
-+
-+#if 0 /* --- by chhung */
-+/* For E2 only */
-+static u8 clk_src_bit[4] = {
-+ 0, 3, 5, 7
-+};
-+
-+static void msdc_select_clksrc(struct msdc_host* host, unsigned char clksrc)
-+{
-+ u32 val;
-+ u32 base = host->base;
-+
-+ BUG_ON(clksrc > 3);
-+ INIT_MSG("set clock source to <%d>", clksrc);
-+
-+ val = sdr_read32(MSDC_CLKSRC_REG);
-+ if (sdr_read32(MSDC_ECO_VER) >= 4) {
-+ val &= ~(0x3 << clk_src_bit[host->id]);
-+ val |= clksrc << clk_src_bit[host->id];
-+ } else {
-+ val &= ~0x3; val |= clksrc;
-+ }
-+ sdr_write32(MSDC_CLKSRC_REG, val);
-+
-+ host->hclk = hclks[clksrc];
-+ host->hw->clk_src = clksrc;
-+}
-+#endif /* end of --- */
-+
-+static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
-+{
-+ //struct msdc_hw *hw = host->hw;
-+ u32 base = host->base;
-+ u32 mode;
-+ u32 flags;
-+ u32 div;
-+ u32 sclk;
-+ u32 hclk = host->hclk;
-+ //u8 clksrc = hw->clk_src;
-+
-+ if (!hz) { // set mmc system clock to 0 ?
-+ //ERR_MSG("set mclk to 0!!!");
-+ msdc_reset();
-+ return;
-+ }
-+
-+ msdc_irq_save(flags);
-+
-+#if defined (CONFIG_MT7621_FPGA) || defined (CONFIG_MT7628_FPGA)
-+ mode = 0x0; /* use divisor */
-+ if (hz >= (hclk >> 1)) {
-+ div = 0; /* mean div = 1/2 */
-+ sclk = hclk >> 1; /* sclk = clk / 2 */
-+ } else {
-+ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
-+ sclk = (hclk >> 2) / div;
-+ }
-+#else
-+ if (ddr) {
-+ mode = 0x2; /* ddr mode and use divisor */
-+ if (hz >= (hclk >> 2)) {
-+ div = 1; /* mean div = 1/4 */
-+ sclk = hclk >> 2; /* sclk = clk / 4 */
-+ } else {
-+ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
-+ sclk = (hclk >> 2) / div;
-+ }
-+ } else if (hz >= hclk) { /* bug fix */
-+ mode = 0x1; /* no divisor and divisor is ignored */
-+ div = 0;
-+ sclk = hclk;
-+ } else {
-+ mode = 0x0; /* use divisor */
-+ if (hz >= (hclk >> 1)) {
-+ div = 0; /* mean div = 1/2 */
-+ sclk = hclk >> 1; /* sclk = clk / 2 */
-+ } else {
-+ div = (hclk + ((hz << 2) - 1)) / (hz << 2);
-+ sclk = (hclk >> 2) / div;
-+ }
-+ }
-+#endif
-+ /* set clock mode and divisor */
-+ sdr_set_field(MSDC_CFG, MSDC_CFG_CKMOD, mode);
-+ sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div);
-+
-+ /* wait clock stable */
-+ while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB));
-+
-+ host->sclk = sclk;
-+ host->mclk = hz;
-+ msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); // need?
-+
-+ INIT_MSG("================");
-+ INIT_MSG("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>", hz/1000, hclk/1000, sclk/1000);
-+ INIT_MSG("================");
-+
-+ msdc_irq_restore(flags);
-+}
-+
-+/* Fix me. when need to abort */
-+static void msdc_abort_data(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+ struct mmc_command *stop = host->mrq->stop;
-+
-+ ERR_MSG("Need to Abort. dma<%d>", host->dma_xfer);
-+
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+
-+ // need to check FIFO count 0 ?
-+
-+ if (stop) { /* try to stop, but may not success */
-+ ERR_MSG("stop when abort CMD<%d>", stop->opcode);
-+ (void)msdc_do_command(host, stop, 0, CMD_TIMEOUT);
-+ }
-+
-+ //if (host->mclk >= 25000000) {
-+ // msdc_set_mclk(host, 0, host->mclk >> 1);
-+ //}
-+}
-+
-+#if 0 /* --- by chhung */
-+static void msdc_pin_config(struct msdc_host *host, int mode)
-+{
-+ struct msdc_hw *hw = host->hw;
-+ u32 base = host->base;
-+ int pull = (mode == MSDC_PIN_PULL_UP) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
-+
-+ /* Config WP pin */
-+ if (hw->flags & MSDC_WP_PIN_EN) {
-+ if (hw->config_gpio_pin) /* NULL */
-+ hw->config_gpio_pin(MSDC_WP_PIN, pull);
-+ }
-+
-+ switch (mode) {
-+ case MSDC_PIN_PULL_UP:
-+ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 1); /* Check & FIXME */
-+ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 0); /* Check & FIXME */
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 1);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 0);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 1);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 0);
-+ break;
-+ case MSDC_PIN_PULL_DOWN:
-+ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 0); /* Check & FIXME */
-+ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 1); /* Check & FIXME */
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 0);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 1);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 0);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 1);
-+ break;
-+ case MSDC_PIN_PULL_NONE:
-+ default:
-+ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 0); /* Check & FIXME */
-+ //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 0); /* Check & FIXME */
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 0);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 0);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 0);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 0);
-+ break;
-+ }
-+
-+ N_MSG(CFG, "Pins mode(%d), down(%d), up(%d)",
-+ mode, MSDC_PIN_PULL_DOWN, MSDC_PIN_PULL_UP);
-+}
-+
-+void msdc_pin_reset(struct msdc_host *host, int mode)
-+{
-+ struct msdc_hw *hw = (struct msdc_hw *)host->hw;
-+ u32 base = host->base;
-+ int pull = (mode == MSDC_PIN_PULL_UP) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
-+
-+ /* Config reset pin */
-+ if (hw->flags & MSDC_RST_PIN_EN) {
-+ if (hw->config_gpio_pin) /* NULL */
-+ hw->config_gpio_pin(MSDC_RST_PIN, pull);
-+
-+ if (mode == MSDC_PIN_PULL_UP) {
-+ sdr_clr_bits(EMMC_IOCON, EMMC_IOCON_BOOTRST);
-+ } else {
-+ sdr_set_bits(EMMC_IOCON, EMMC_IOCON_BOOTRST);
-+ }
-+ }
-+}
-+
-+static void msdc_core_power(struct msdc_host *host, int on)
-+{
-+ N_MSG(CFG, "Turn %s %s power (copower: %d -> %d)",
-+ on ? "on" : "off", "core", host->core_power, on);
-+
-+ if (on && host->core_power == 0) {
-+ msdc_vcore_on(host);
-+ host->core_power = 1;
-+ msleep(1);
-+ } else if (!on && host->core_power == 1) {
-+ msdc_vcore_off(host);
-+ host->core_power = 0;
-+ msleep(1);
-+ }
-+}
-+
-+static void msdc_host_power(struct msdc_host *host, int on)
-+{
-+ N_MSG(CFG, "Turn %s %s power ", on ? "on" : "off", "host");
-+
-+ if (on) {
-+ //msdc_core_power(host, 1); // need do card detection.
-+ msdc_pin_reset(host, MSDC_PIN_PULL_UP);
-+ } else {
-+ msdc_pin_reset(host, MSDC_PIN_PULL_DOWN);
-+ //msdc_core_power(host, 0);
-+ }
-+}
-+
-+static void msdc_card_power(struct msdc_host *host, int on)
-+{
-+ N_MSG(CFG, "Turn %s %s power ", on ? "on" : "off", "card");
-+
-+ if (on) {
-+ msdc_pin_config(host, MSDC_PIN_PULL_UP);
-+ if (host->hw->ext_power_on) {
-+ host->hw->ext_power_on();
-+ } else {
-+ //msdc_vdd_on(host); // need todo card detection.
-+ }
-+ msleep(1);
-+ } else {
-+ if (host->hw->ext_power_off) {
-+ host->hw->ext_power_off();
-+ } else {
-+ //msdc_vdd_off(host);
-+ }
-+ msdc_pin_config(host, MSDC_PIN_PULL_DOWN);
-+ msleep(1);
-+ }
-+}
-+
-+static void msdc_set_power_mode(struct msdc_host *host, u8 mode)
-+{
-+ N_MSG(CFG, "Set power mode(%d)", mode);
-+
-+ if (host->power_mode == MMC_POWER_OFF && mode != MMC_POWER_OFF) {
-+ msdc_host_power(host, 1);
-+ msdc_card_power(host, 1);
-+ } else if (host->power_mode != MMC_POWER_OFF && mode == MMC_POWER_OFF) {
-+ msdc_card_power(host, 0);
-+ msdc_host_power(host, 0);
-+ }
-+ host->power_mode = mode;
-+}
-+#endif /* end of --- */
-+
-+#ifdef CONFIG_PM
-+/*
-+ register as callback function of WIFI(combo_sdio_register_pm) .
-+ can called by msdc_drv_suspend/resume too.
-+*/
-+static void msdc_pm(pm_message_t state, void *data)
-+{
-+ struct msdc_host *host = (struct msdc_host *)data;
-+ int evt = state.event;
-+
-+ if (evt == PM_EVENT_USER_RESUME || evt == PM_EVENT_USER_SUSPEND) {
-+ INIT_MSG("USR_%s: suspend<%d> power<%d>",
-+ evt == PM_EVENT_USER_RESUME ? "EVENT_USER_RESUME" : "EVENT_USER_SUSPEND",
-+ host->suspend, host->power_mode);
-+ }
-+
-+ if (evt == PM_EVENT_SUSPEND || evt == PM_EVENT_USER_SUSPEND) {
-+ if (host->suspend) /* already suspend */ /* default 0*/
-+ return;
-+
-+ /* for memory card. already power off by mmc */
-+ if (evt == PM_EVENT_SUSPEND && host->power_mode == MMC_POWER_OFF)
-+ return;
-+
-+ host->suspend = 1;
-+ host->pm_state = state; /* default PMSG_RESUME */
-+
-+ INIT_MSG("%s Suspend", evt == PM_EVENT_SUSPEND ? "PM" : "USR");
-+ if(host->hw->flags & MSDC_SYS_SUSPEND) /* set for card */
-+ (void)mmc_suspend_host(host->mmc);
-+ else {
-+ // host->mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* just for double confirm */ /* --- by chhung */
-+ mmc_remove_host(host->mmc);
-+ }
-+ } else if (evt == PM_EVENT_RESUME || evt == PM_EVENT_USER_RESUME) {
-+ if (!host->suspend){
-+ //ERR_MSG("warning: already resume");
-+ return;
-+ }
-+
-+ /* No PM resume when USR suspend */
-+ if (evt == PM_EVENT_RESUME && host->pm_state.event == PM_EVENT_USER_SUSPEND) {
-+ ERR_MSG("PM Resume when in USR Suspend"); /* won't happen. */
-+ return;
-+ }
-+
-+ host->suspend = 0;
-+ host->pm_state = state;
-+
-+ INIT_MSG("%s Resume", evt == PM_EVENT_RESUME ? "PM" : "USR");
-+ if(host->hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */
-+ (void)mmc_resume_host(host->mmc);
-+ }
-+ else {
-+ // host->mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* --- by chhung */
-+ mmc_add_host(host->mmc);
-+ }
-+ }
-+}
-+#endif
-+
-+/*--------------------------------------------------------------------------*/
-+/* mmc_host_ops members */
-+/*--------------------------------------------------------------------------*/
-+static unsigned int msdc_command_start(struct msdc_host *host,
-+ struct mmc_command *cmd,
-+ int tune, /* not used */
-+ unsigned long timeout)
-+{
-+ u32 base = host->base;
-+ u32 opcode = cmd->opcode;
-+ u32 rawcmd;
-+ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
-+ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
-+ MSDC_INT_ACMD19_DONE;
-+
-+ u32 resp;
-+ unsigned long tmo;
-+
-+ /* Protocol layer does not provide response type, but our hardware needs
-+ * to know exact type, not just size!
-+ */
-+ if (opcode == MMC_SEND_OP_COND || opcode == SD_APP_OP_COND)
-+ resp = RESP_R3;
-+ else if (opcode == MMC_SET_RELATIVE_ADDR || opcode == SD_SEND_RELATIVE_ADDR)
-+ resp = (mmc_cmd_type(cmd) == MMC_CMD_BCR) ? RESP_R6 : RESP_R1;
-+ else if (opcode == MMC_FAST_IO)
-+ resp = RESP_R4;
-+ else if (opcode == MMC_GO_IRQ_STATE)
-+ resp = RESP_R5;
-+ else if (opcode == MMC_SELECT_CARD)
-+ resp = (cmd->arg != 0) ? RESP_R1B : RESP_NONE;
-+ else if (opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED)
-+ resp = RESP_R1; /* SDIO workaround. */
-+ else if (opcode == SD_SEND_IF_COND && (mmc_cmd_type(cmd) == MMC_CMD_BCR))
-+ resp = RESP_R1;
-+ else {
-+ switch (mmc_resp_type(cmd)) {
-+ case MMC_RSP_R1:
-+ resp = RESP_R1;
-+ break;
-+ case MMC_RSP_R1B:
-+ resp = RESP_R1B;
-+ break;
-+ case MMC_RSP_R2:
-+ resp = RESP_R2;
-+ break;
-+ case MMC_RSP_R3:
-+ resp = RESP_R3;
-+ break;
-+ case MMC_RSP_NONE:
-+ default:
-+ resp = RESP_NONE;
-+ break;
-+ }
-+ }
-+
-+ cmd->error = 0;
-+ /* rawcmd :
-+ * vol_swt << 30 | auto_cmd << 28 | blklen << 16 | go_irq << 15 |
-+ * stop << 14 | rw << 13 | dtype << 11 | rsptyp << 7 | brk << 6 | opcode
-+ */
-+ rawcmd = opcode | msdc_rsp[resp] << 7 | host->blksz << 16;
-+
-+ if (opcode == MMC_READ_MULTIPLE_BLOCK) {
-+ rawcmd |= (2 << 11);
-+ } else if (opcode == MMC_READ_SINGLE_BLOCK) {
-+ rawcmd |= (1 << 11);
-+ } else if (opcode == MMC_WRITE_MULTIPLE_BLOCK) {
-+ rawcmd |= ((2 << 11) | (1 << 13));
-+ } else if (opcode == MMC_WRITE_BLOCK) {
-+ rawcmd |= ((1 << 11) | (1 << 13));
-+ } else if (opcode == SD_IO_RW_EXTENDED) {
-+ if (cmd->data->flags & MMC_DATA_WRITE)
-+ rawcmd |= (1 << 13);
-+ if (cmd->data->blocks > 1)
-+ rawcmd |= (2 << 11);
-+ else
-+ rawcmd |= (1 << 11);
-+ } else if (opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)-1) {
-+ rawcmd |= (1 << 14);
-+ } else if ((opcode == SD_APP_SEND_SCR) ||
-+ (opcode == SD_APP_SEND_NUM_WR_BLKS) ||
-+ (opcode == SD_SWITCH && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
-+ (opcode == SD_APP_SD_STATUS && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) ||
-+ (opcode == MMC_SEND_EXT_CSD && (mmc_cmd_type(cmd) == MMC_CMD_ADTC))) {
-+ rawcmd |= (1 << 11);
-+ } else if (opcode == MMC_STOP_TRANSMISSION) {
-+ rawcmd |= (1 << 14);
-+ rawcmd &= ~(0x0FFF << 16);
-+ }
-+
-+ N_MSG(CMD, "CMD<%d><0x%.8x> Arg<0x%.8x>", opcode , rawcmd, cmd->arg);
-+
-+ tmo = jiffies + timeout;
-+
-+ if (opcode == MMC_SEND_STATUS) {
-+ for (;;) {
-+ if (!sdc_is_cmd_busy())
-+ break;
-+
-+ if (time_after(jiffies, tmo)) {
-+ ERR_MSG("XXX cmd_busy timeout: before CMD<%d>", opcode);
-+ cmd->error = (unsigned int)-ETIMEDOUT;
-+ msdc_reset();
-+ goto end;
-+ }
-+ }
-+ }else {
-+ for (;;) {
-+ if (!sdc_is_busy())
-+ break;
-+ if (time_after(jiffies, tmo)) {
-+ ERR_MSG("XXX sdc_busy timeout: before CMD<%d>", opcode);
-+ cmd->error = (unsigned int)-ETIMEDOUT;
-+ msdc_reset();
-+ goto end;
-+ }
-+ }
-+ }
-+
-+ //BUG_ON(in_interrupt());
-+ host->cmd = cmd;
-+ host->cmd_rsp = resp;
-+
-+ init_completion(&host->cmd_done);
-+
-+ sdr_set_bits(MSDC_INTEN, wints);
-+ sdc_send_cmd(rawcmd, cmd->arg);
-+
-+end:
-+ return cmd->error;
-+}
-+
-+static unsigned int msdc_command_resp(struct msdc_host *host,
-+ struct mmc_command *cmd,
-+ int tune,
-+ unsigned long timeout)
-+{
-+ u32 base = host->base;
-+ u32 opcode = cmd->opcode;
-+ //u32 rawcmd;
-+ u32 resp;
-+ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO |
-+ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO |
-+ MSDC_INT_ACMD19_DONE;
-+
-+ resp = host->cmd_rsp;
-+
-+ BUG_ON(in_interrupt());
-+ //init_completion(&host->cmd_done);
-+ //sdr_set_bits(MSDC_INTEN, wints);
-+
-+ spin_unlock(&host->lock);
-+ if(!wait_for_completion_timeout(&host->cmd_done, 10*timeout)){
-+ ERR_MSG("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>", opcode, cmd->arg);
-+ cmd->error = (unsigned int)-ETIMEDOUT;
-+ msdc_reset();
-+ }
-+ spin_lock(&host->lock);
-+
-+ sdr_clr_bits(MSDC_INTEN, wints);
-+ host->cmd = NULL;
-+
-+//end:
-+#ifdef MT6575_SD_DEBUG
-+ switch (resp) {
-+ case RESP_NONE:
-+ N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)", opcode, cmd->error, resp);
-+ break;
-+ case RESP_R2:
-+ N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)= %.8x %.8x %.8x %.8x",
-+ opcode, cmd->error, resp, cmd->resp[0], cmd->resp[1],
-+ cmd->resp[2], cmd->resp[3]);
-+ break;
-+ default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
-+ N_MSG(RSP, "CMD_RSP(%d): %d RSP(%d)= 0x%.8x",
-+ opcode, cmd->error, resp, cmd->resp[0]);
-+ if (cmd->error == 0) {
-+ switch (resp) {
-+ case RESP_R1:
-+ case RESP_R1B:
-+ msdc_dump_card_status(host, cmd->resp[0]);
-+ break;
-+ case RESP_R3:
-+ msdc_dump_ocr_reg(host, cmd->resp[0]);
-+ break;
-+ case RESP_R5:
-+ msdc_dump_io_resp(host, cmd->resp[0]);
-+ break;
-+ case RESP_R6:
-+ msdc_dump_rca_resp(host, cmd->resp[0]);
-+ break;
-+ }
-+ }
-+ break;
-+ }
-+#endif
-+
-+ /* do we need to save card's RCA when SD_SEND_RELATIVE_ADDR */
-+
-+ if (!tune) {
-+ return cmd->error;
-+ }
-+
-+ /* memory card CRC */
-+ if(host->hw->flags & MSDC_REMOVABLE && cmd->error == (unsigned int)(-EIO) ) {
-+ if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
-+ msdc_abort_data(host);
-+ } else {
-+ /* do basic: reset*/
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ }
-+ cmd->error = msdc_tune_cmdrsp(host,cmd);
-+ }
-+
-+ // check DAT0
-+ /* if (resp == RESP_R1B) {
-+ while ((sdr_read32(MSDC_PS) & 0x10000) != 0x10000);
-+ } */
-+ /* CMD12 Error Handle */
-+
-+ return cmd->error;
-+}
-+
-+static unsigned int msdc_do_command(struct msdc_host *host,
-+ struct mmc_command *cmd,
-+ int tune,
-+ unsigned long timeout)
-+{
-+ if (msdc_command_start(host, cmd, tune, timeout))
-+ goto end;
-+
-+ if (msdc_command_resp(host, cmd, tune, timeout))
-+ goto end;
-+
-+end:
-+
-+ N_MSG(CMD, " return<%d> resp<0x%.8x>", cmd->error, cmd->resp[0]);
-+ return cmd->error;
-+}
-+
-+/* The abort condition when PIO read/write
-+ tmo:
-+*/
-+static int msdc_pio_abort(struct msdc_host *host, struct mmc_data *data, unsigned long tmo)
-+{
-+ int ret = 0;
-+ u32 base = host->base;
-+
-+ if (atomic_read(&host->abort)) {
-+ ret = 1;
-+ }
-+
-+ if (time_after(jiffies, tmo)) {
-+ data->error = (unsigned int)-ETIMEDOUT;
-+ ERR_MSG("XXX PIO Data Timeout: CMD<%d>", host->mrq->cmd->opcode);
-+ ret = 1;
-+ }
-+
-+ if(ret) {
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ ERR_MSG("msdc pio find abort");
-+ }
-+ return ret;
-+}
-+
-+/*
-+ Need to add a timeout, or WDT timeout, system reboot.
-+*/
-+// pio mode data read/write
-+static int msdc_pio_read(struct msdc_host *host, struct mmc_data *data)
-+{
-+ struct scatterlist *sg = data->sg;
-+ u32 base = host->base;
-+ u32 num = data->sg_len;
-+ u32 *ptr;
-+ u8 *u8ptr;
-+ u32 left = 0;
-+ u32 count, size = 0;
-+ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR ;
-+ unsigned long tmo = jiffies + DAT_TIMEOUT;
-+
-+ sdr_set_bits(MSDC_INTEN, wints);
-+ while (num) {
-+ left = sg_dma_len(sg);
-+ ptr = sg_virt(sg);
-+ while (left) {
-+ if ((left >= MSDC_FIFO_THD) && (msdc_rxfifocnt() >= MSDC_FIFO_THD)) {
-+ count = MSDC_FIFO_THD >> 2;
-+ do {
-+ *ptr++ = msdc_fifo_read32();
-+ } while (--count);
-+ left -= MSDC_FIFO_THD;
-+ } else if ((left < MSDC_FIFO_THD) && msdc_rxfifocnt() >= left) {
-+ while (left > 3) {
-+ *ptr++ = msdc_fifo_read32();
-+ left -= 4;
-+ }
-+
-+ u8ptr = (u8 *)ptr;
-+ while(left) {
-+ * u8ptr++ = msdc_fifo_read8();
-+ left--;
-+ }
-+ }
-+
-+ if (msdc_pio_abort(host, data, tmo)) {
-+ goto end;
-+ }
-+ }
-+ size += sg_dma_len(sg);
-+ sg = sg_next(sg); num--;
-+ }
-+end:
-+ data->bytes_xfered += size;
-+ N_MSG(FIO, " PIO Read<%d>bytes", size);
-+
-+ sdr_clr_bits(MSDC_INTEN, wints);
-+ if(data->error) ERR_MSG("read pio data->error<%d> left<%d> size<%d>", data->error, left, size);
-+ return data->error;
-+}
-+
-+/* please make sure won't using PIO when size >= 512
-+ which means, memory card block read/write won't using pio
-+ then don't need to handle the CMD12 when data error.
-+*/
-+static int msdc_pio_write(struct msdc_host* host, struct mmc_data *data)
-+{
-+ u32 base = host->base;
-+ struct scatterlist *sg = data->sg;
-+ u32 num = data->sg_len;
-+ u32 *ptr;
-+ u8 *u8ptr;
-+ u32 left;
-+ u32 count, size = 0;
-+ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR ;
-+ unsigned long tmo = jiffies + DAT_TIMEOUT;
-+
-+ sdr_set_bits(MSDC_INTEN, wints);
-+ while (num) {
-+ left = sg_dma_len(sg);
-+ ptr = sg_virt(sg);
-+
-+ while (left) {
-+ if (left >= MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
-+ count = MSDC_FIFO_SZ >> 2;
-+ do {
-+ msdc_fifo_write32(*ptr); ptr++;
-+ } while (--count);
-+ left -= MSDC_FIFO_SZ;
-+ } else if (left < MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
-+ while (left > 3) {
-+ msdc_fifo_write32(*ptr); ptr++;
-+ left -= 4;
-+ }
-+
-+ u8ptr = (u8*)ptr;
-+ while(left){
-+ msdc_fifo_write8(*u8ptr); u8ptr++;
-+ left--;
-+ }
-+ }
-+
-+ if (msdc_pio_abort(host, data, tmo)) {
-+ goto end;
-+ }
-+ }
-+ size += sg_dma_len(sg);
-+ sg = sg_next(sg); num--;
-+ }
-+end:
-+ data->bytes_xfered += size;
-+ N_MSG(FIO, " PIO Write<%d>bytes", size);
-+ if(data->error) ERR_MSG("write pio data->error<%d>", data->error);
-+
-+ sdr_clr_bits(MSDC_INTEN, wints);
-+ return data->error;
-+}
-+
-+#if 0 /* --- by chhung */
-+// DMA resume / start / stop
-+static void msdc_dma_resume(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_RESUME, 1);
-+
-+ N_MSG(DMA, "DMA resume");
-+}
-+#endif /* end of --- */
-+
-+static void msdc_dma_start(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR ;
-+
-+ sdr_set_bits(MSDC_INTEN, wints);
-+ //dsb(); /* --- by chhung */
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1);
-+
-+ N_MSG(DMA, "DMA start");
-+}
-+
-+static void msdc_dma_stop(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+ //u32 retries=500;
-+ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR ;
-+
-+ N_MSG(DMA, "DMA status: 0x%.8x",sdr_read32(MSDC_DMA_CFG));
-+ //while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
-+
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1);
-+ while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS);
-+
-+ //dsb(); /* --- by chhung */
-+ sdr_clr_bits(MSDC_INTEN, wints); /* Not just xfer_comp */
-+
-+ N_MSG(DMA, "DMA stop");
-+}
-+
-+#if 0 /* --- by chhung */
-+/* dump a gpd list */
-+static void msdc_dma_dump(struct msdc_host *host, struct msdc_dma *dma)
-+{
-+ gpd_t *gpd = dma->gpd;
-+ bd_t *bd = dma->bd;
-+ bd_t *ptr;
-+ int i = 0;
-+ int p_to_v;
-+
-+ if (dma->mode != MSDC_MODE_DMA_DESC) {
-+ return;
-+ }
-+
-+ ERR_MSG("try to dump gpd and bd");
-+
-+ /* dump gpd */
-+ ERR_MSG(".gpd<0x%.8x> gpd_phy<0x%.8x>", (int)gpd, (int)dma->gpd_addr);
-+ ERR_MSG("...hwo <%d>", gpd->hwo );
-+ ERR_MSG("...bdp <%d>", gpd->bdp );
-+ ERR_MSG("...chksum<0x%.8x>", gpd->chksum );
-+ //ERR_MSG("...intr <0x%.8x>", gpd->intr );
-+ ERR_MSG("...next <0x%.8x>", (int)gpd->next );
-+ ERR_MSG("...ptr <0x%.8x>", (int)gpd->ptr );
-+ ERR_MSG("...buflen<0x%.8x>", gpd->buflen );
-+ //ERR_MSG("...extlen<0x%.8x>", gpd->extlen );
-+ //ERR_MSG("...arg <0x%.8x>", gpd->arg );
-+ //ERR_MSG("...blknum<0x%.8x>", gpd->blknum );
-+ //ERR_MSG("...cmd <0x%.8x>", gpd->cmd );
-+
-+ /* dump bd */
-+ ERR_MSG(".bd<0x%.8x> bd_phy<0x%.8x> gpd_ptr<0x%.8x>", (int)bd, (int)dma->bd_addr, (int)gpd->ptr);
-+ ptr = bd;
-+ p_to_v = ((u32)bd - (u32)dma->bd_addr);
-+ while (1) {
-+ ERR_MSG(".bd[%d]", i); i++;
-+ ERR_MSG("...eol <%d>", ptr->eol );
-+ ERR_MSG("...chksum<0x%.8x>", ptr->chksum );
-+ //ERR_MSG("...blkpad<0x%.8x>", ptr->blkpad );
-+ //ERR_MSG("...dwpad <0x%.8x>", ptr->dwpad );
-+ ERR_MSG("...next <0x%.8x>", (int)ptr->next );
-+ ERR_MSG("...ptr <0x%.8x>", (int)ptr->ptr );
-+ ERR_MSG("...buflen<0x%.8x>", (int)ptr->buflen );
-+
-+ if (ptr->eol == 1) {
-+ break;
-+ }
-+
-+ /* find the next bd, virtual address of ptr->next */
-+ /* don't need to enable when use malloc */
-+ //BUG_ON( (ptr->next + p_to_v)!=(ptr+1) );
-+ //ERR_MSG(".next bd<0x%.8x><0x%.8x>", (ptr->next + p_to_v), (ptr+1));
-+ ptr++;
-+ }
-+
-+ ERR_MSG("dump gpd and bd finished");
-+}
-+#endif /* end of --- */
-+
-+/* calc checksum */
-+static u8 msdc_dma_calcs(u8 *buf, u32 len)
-+{
-+ u32 i, sum = 0;
-+ for (i = 0; i < len; i++) {
-+ sum += buf[i];
-+ }
-+ return 0xFF - (u8)sum;
-+}
-+
-+/* gpd bd setup + dma registers */
-+static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma)
-+{
-+ u32 base = host->base;
-+ u32 sglen = dma->sglen;
-+ //u32 i, j, num, bdlen, arg, xfersz;
-+ u32 j, num, bdlen;
-+ u8 blkpad, dwpad, chksum;
-+ struct scatterlist *sg = dma->sg;
-+ gpd_t *gpd;
-+ bd_t *bd;
-+
-+ switch (dma->mode) {
-+ case MSDC_MODE_DMA_BASIC:
-+ BUG_ON(dma->xfersz > 65535);
-+ BUG_ON(dma->sglen != 1);
-+ sdr_write32(MSDC_DMA_SA, PHYSADDR(sg_dma_address(sg)));
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_LASTBUF, 1);
-+//#if defined (CONFIG_RALINK_MT7620)
-+ if (ralink_soc == MT762X_SOC_MT7620A)
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_XFERSZ, sg_dma_len(sg));
-+//#elif defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628)
-+ else
-+ sdr_write32((volatile u32*)(RALINK_MSDC_BASE+0xa8), sg_dma_len(sg));
-+//#endif
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0);
-+ break;
-+ case MSDC_MODE_DMA_DESC:
-+ blkpad = (dma->flags & DMA_FLAG_PAD_BLOCK) ? 1 : 0;
-+ dwpad = (dma->flags & DMA_FLAG_PAD_DWORD) ? 1 : 0;
-+ chksum = (dma->flags & DMA_FLAG_EN_CHKSUM) ? 1 : 0;
-+
-+ /* calculate the required number of gpd */
-+ num = (sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD;
-+ BUG_ON(num !=1 );
-+
-+ gpd = dma->gpd;
-+ bd = dma->bd;
-+ bdlen = sglen;
-+
-+ /* modify gpd*/
-+ //gpd->intr = 0;
-+ gpd->hwo = 1; /* hw will clear it */
-+ gpd->bdp = 1;
-+ gpd->chksum = 0; /* need to clear first. */
-+ gpd->chksum = (chksum ? msdc_dma_calcs((u8 *)gpd, 16) : 0);
-+
-+ /* modify bd*/
-+ for (j = 0; j < bdlen; j++) {
-+ msdc_init_bd(&bd[j], blkpad, dwpad, sg_dma_address(sg), sg_dma_len(sg));
-+ if(j == bdlen - 1) {
-+ bd[j].eol = 1; /* the last bd */
-+ } else {
-+ bd[j].eol = 0;
-+ }
-+ bd[j].chksum = 0; /* checksume need to clear first */
-+ bd[j].chksum = (chksum ? msdc_dma_calcs((u8 *)(&bd[j]), 16) : 0);
-+ sg++;
-+ }
-+
-+ dma->used_gpd += 2;
-+ dma->used_bd += bdlen;
-+
-+ sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, chksum);
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz);
-+ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1);
-+
-+ sdr_write32(MSDC_DMA_SA, PHYSADDR((u32)dma->gpd_addr));
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ N_MSG(DMA, "DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
-+ N_MSG(DMA, "DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
-+ N_MSG(DMA, "DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
-+
-+ return 0;
-+}
-+
-+static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma,
-+ struct scatterlist *sg, unsigned int sglen)
-+{
-+ BUG_ON(sglen > MAX_BD_NUM); /* not support currently */
-+
-+ dma->sg = sg;
-+ dma->flags = DMA_FLAG_EN_CHKSUM;
-+ //dma->flags = DMA_FLAG_NONE; /* CHECKME */
-+ dma->sglen = sglen;
-+ dma->xfersz = host->xfer_size;
-+ dma->burstsz = MSDC_BRUST_64B;
-+
-+ if (sglen == 1 && sg_dma_len(sg) <= MAX_DMA_CNT)
-+ dma->mode = MSDC_MODE_DMA_BASIC;
-+ else
-+ dma->mode = MSDC_MODE_DMA_DESC;
-+
-+ N_MSG(DMA, "DMA mode<%d> sglen<%d> xfersz<%d>", dma->mode, dma->sglen, dma->xfersz);
-+
-+ msdc_dma_config(host, dma);
-+
-+ /*if (dma->mode == MSDC_MODE_DMA_DESC) {
-+ //msdc_dma_dump(host, dma);
-+ } */
-+}
-+
-+/* set block number before send command */
-+static void msdc_set_blknum(struct msdc_host *host, u32 blknum)
-+{
-+ u32 base = host->base;
-+
-+ sdr_write32(SDC_BLK_NUM, blknum);
-+}
-+
-+static int msdc_do_request(struct mmc_host*mmc, struct mmc_request*mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+ u32 base = host->base;
-+ //u32 intsts = 0;
-+ unsigned int left=0;
-+ int dma = 0, read = 1, dir = DMA_FROM_DEVICE, send_type=0;
-+
-+ #define SND_DAT 0
-+ #define SND_CMD 1
-+
-+ BUG_ON(mmc == NULL);
-+ BUG_ON(mrq == NULL);
-+
-+ host->error = 0;
-+ atomic_set(&host->abort, 0);
-+
-+ cmd = mrq->cmd;
-+ data = mrq->cmd->data;
-+
-+#if 0 /* --- by chhung */
-+ //if(host->id ==1){
-+ N_MSG(OPS, "enable clock!");
-+ msdc_ungate_clock(host->id);
-+ //}
-+#endif /* end of --- */
-+
-+ if (!data) {
-+ send_type=SND_CMD;
-+ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0) {
-+ goto done;
-+ }
-+ } else {
-+ BUG_ON(data->blksz > HOST_MAX_BLKSZ);
-+ send_type=SND_DAT;
-+
-+ data->error = 0;
-+ read = data->flags & MMC_DATA_READ ? 1 : 0;
-+ host->data = data;
-+ host->xfer_size = data->blocks * data->blksz;
-+ host->blksz = data->blksz;
-+
-+ /* deside the transfer mode */
-+ if (drv_mode[host->id] == MODE_PIO) {
-+ host->dma_xfer = dma = 0;
-+ } else if (drv_mode[host->id] == MODE_DMA) {
-+ host->dma_xfer = dma = 1;
-+ } else if (drv_mode[host->id] == MODE_SIZE_DEP) {
-+ host->dma_xfer = dma = ((host->xfer_size >= dma_size[host->id]) ? 1 : 0);
-+ }
-+
-+ if (read) {
-+ if ((host->timeout_ns != data->timeout_ns) ||
-+ (host->timeout_clks != data->timeout_clks)) {
-+ msdc_set_timeout(host, data->timeout_ns, data->timeout_clks);
-+ }
-+ }
-+
-+ msdc_set_blknum(host, data->blocks);
-+ //msdc_clr_fifo(); /* no need */
-+
-+ if (dma) {
-+ msdc_dma_on(); /* enable DMA mode first!! */
-+ init_completion(&host->xfer_done);
-+
-+ /* start the command first*/
-+ if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
-+ goto done;
-+
-+ dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
-+ (void)dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
-+ msdc_dma_setup(host, &host->dma, data->sg, data->sg_len);
-+
-+ /* then wait command done */
-+ if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
-+ goto done;
-+
-+ /* for read, the data coming too fast, then CRC error
-+ start DMA no business with CRC. */
-+ //init_completion(&host->xfer_done);
-+ msdc_dma_start(host);
-+
-+ spin_unlock(&host->lock);
-+ if(!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)){
-+ ERR_MSG("XXX CMD<%d> wait xfer_done<%d> timeout!!", cmd->opcode, data->blocks * data->blksz);
-+ ERR_MSG(" DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
-+ ERR_MSG(" DMA_CA = 0x%x", sdr_read32(MSDC_DMA_CA));
-+ ERR_MSG(" DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
-+ ERR_MSG(" DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
-+ data->error = (unsigned int)-ETIMEDOUT;
-+
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ }
-+ spin_lock(&host->lock);
-+ msdc_dma_stop(host);
-+ } else {
-+ /* Firstly: send command */
-+ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0) {
-+ goto done;
-+ }
-+
-+ /* Secondly: pio data phase */
-+ if (read) {
-+ if (msdc_pio_read(host, data)){
-+ goto done;
-+ }
-+ } else {
-+ if (msdc_pio_write(host, data)) {
-+ goto done;
-+ }
-+ }
-+
-+ /* For write case: make sure contents in fifo flushed to device */
-+ if (!read) {
-+ while (1) {
-+ left=msdc_txfifocnt();
-+ if (left == 0) {
-+ break;
-+ }
-+ if (msdc_pio_abort(host, data, jiffies + DAT_TIMEOUT)) {
-+ break;
-+ /* Fix me: what about if data error, when stop ? how to? */
-+ }
-+ }
-+ } else {
-+ /* Fix me: read case: need to check CRC error */
-+ }
-+
-+ /* For write case: SDCBUSY and Xfer_Comp will assert when DAT0 not busy.
-+ For read case : SDCBUSY and Xfer_Comp will assert when last byte read out from FIFO.
-+ */
-+
-+ /* try not to wait xfer_comp interrupt.
-+ the next command will check SDC_BUSY.
-+ SDC_BUSY means xfer_comp assert
-+ */
-+
-+ } // PIO mode
-+
-+ /* Last: stop transfer */
-+ if (data->stop){
-+ if (msdc_do_command(host, data->stop, 0, CMD_TIMEOUT) != 0) {
-+ goto done;
-+ }
-+ }
-+ }
-+
-+done:
-+ if (data != NULL) {
-+ host->data = NULL;
-+ host->dma_xfer = 0;
-+ if (dma != 0) {
-+ msdc_dma_off();
-+ host->dma.used_bd = 0;
-+ host->dma.used_gpd = 0;
-+ dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, dir);
-+ }
-+ host->blksz = 0;
-+
-+#if 0 // don't stop twice!
-+ if(host->hw->flags & MSDC_REMOVABLE && data->error) {
-+ msdc_abort_data(host);
-+ /* reset in IRQ, stop command has issued. -> No need */
-+ }
-+#endif
-+
-+ N_MSG(OPS, "CMD<%d> data<%s %s> blksz<%d> block<%d> error<%d>",cmd->opcode, (dma? "dma":"pio"),
-+ (read ? "read ":"write") ,data->blksz, data->blocks, data->error);
-+ }
-+
-+#if 0 /* --- by chhung */
-+#if 1
-+ //if(host->id==1) {
-+ if(send_type==SND_CMD) {
-+ if(cmd->opcode == MMC_SEND_STATUS) {
-+ if((cmd->resp[0] & CARD_READY_FOR_DATA) ||(CARD_CURRENT_STATE(cmd->resp[0]) != 7)){
-+ N_MSG(OPS,"disable clock, CMD13 IDLE");
-+ msdc_gate_clock(host->id);
-+ }
-+ } else {
-+ N_MSG(OPS,"disable clock, CMD<%d>", cmd->opcode);
-+ msdc_gate_clock(host->id);
-+ }
-+ } else {
-+ if(read) {
-+ N_MSG(OPS,"disable clock!!! Read CMD<%d>",cmd->opcode);
-+ msdc_gate_clock(host->id);
-+ }
-+ }
-+ //}
-+#else
-+ msdc_gate_clock(host->id);
-+#endif
-+#endif /* end of --- */
-+
-+ if (mrq->cmd->error) host->error = 0x001;
-+ if (mrq->data && mrq->data->error) host->error |= 0x010;
-+ if (mrq->stop && mrq->stop->error) host->error |= 0x100;
-+
-+ //if (host->error) ERR_MSG("host->error<%d>", host->error);
-+
-+ return host->error;
-+}
-+
-+static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host)
-+{
-+ struct mmc_command cmd;
-+ struct mmc_request mrq;
-+ u32 err;
-+
-+ memset(&cmd, 0, sizeof(struct mmc_command));
-+ cmd.opcode = MMC_APP_CMD;
-+#if 0 /* bug: we meet mmc->card is null when ACMD6 */
-+ cmd.arg = mmc->card->rca << 16;
-+#else
-+ cmd.arg = host->app_cmd_arg;
-+#endif
-+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
-+
-+ memset(&mrq, 0, sizeof(struct mmc_request));
-+ mrq.cmd = &cmd; cmd.mrq = &mrq;
-+ cmd.data = NULL;
-+
-+ err = msdc_do_command(host, &cmd, 0, CMD_TIMEOUT);
-+ return err;
-+}
-+
-+static int msdc_tune_cmdrsp(struct msdc_host*host, struct mmc_command *cmd)
-+{
-+ int result = -1;
-+ u32 base = host->base;
-+ u32 rsmpl, cur_rsmpl, orig_rsmpl;
-+ u32 rrdly, cur_rrdly = 0xffffffff, orig_rrdly;
-+ u32 skip = 1;
-+
-+ /* ==== don't support 3.0 now ====
-+ 1: R_SMPL[1]
-+ 2: PAD_CMD_RESP_RXDLY[26:22]
-+ ==========================*/
-+
-+ // save the previous tune result
-+ sdr_get_field(MSDC_IOCON, MSDC_IOCON_RSPL, orig_rsmpl);
-+ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, orig_rrdly);
-+
-+ rrdly = 0;
-+ do {
-+ for (rsmpl = 0; rsmpl < 2; rsmpl++) {
-+ /* Lv1: R_SMPL[1] */
-+ cur_rsmpl = (orig_rsmpl + rsmpl) % 2;
-+ if (skip == 1) {
-+ skip = 0;
-+ continue;
-+ }
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, cur_rsmpl);
-+
-+ if (host->app_cmd) {
-+ result = msdc_app_cmd(host->mmc, host);
-+ if (result) {
-+ ERR_MSG("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>",
-+ host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl);
-+ continue;
-+ }
-+ }
-+ result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune.
-+ ERR_MSG("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>", cmd->opcode,
-+ (result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl);
-+
-+ if (result == 0) {
-+ return 0;
-+ }
-+ if (result != (unsigned int)(-EIO)) {
-+ ERR_MSG("TUNE_CMD<%d> Error<%d> not -EIO", cmd->opcode, result);
-+ return result;
-+ }
-+
-+ /* should be EIO */
-+ if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */
-+ msdc_abort_data(host);
-+ }
-+ }
-+
-+ /* Lv2: PAD_CMD_RESP_RXDLY[26:22] */
-+ cur_rrdly = (orig_rrdly + rrdly + 1) % 32;
-+ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, cur_rrdly);
-+ }while (++rrdly < 32);
-+
-+ return result;
-+}
-+
-+/* Support SD2.0 Only */
-+static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ u32 base = host->base;
-+ u32 ddr=0;
-+ u32 dcrc=0;
-+ u32 rxdly, cur_rxdly0, cur_rxdly1;
-+ u32 dsmpl, cur_dsmpl, orig_dsmpl;
-+ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
-+ u32 cur_dat4, cur_dat5, cur_dat6, cur_dat7;
-+ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
-+ u32 orig_dat4, orig_dat5, orig_dat6, orig_dat7;
-+ int result = -1;
-+ u32 skip = 1;
-+
-+ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl);
-+
-+ /* Tune Method 2. */
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
-+
-+ rxdly = 0;
-+ do {
-+ for (dsmpl = 0; dsmpl < 2; dsmpl++) {
-+ cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
-+ if (skip == 1) {
-+ skip = 0;
-+ continue;
-+ }
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
-+
-+ if (host->app_cmd) {
-+ result = msdc_app_cmd(host->mmc, host);
-+ if (result) {
-+ ERR_MSG("TUNE_BREAD app_cmd<%d> failed", host->mrq->cmd->opcode);
-+ continue;
-+ }
-+ }
-+ result = msdc_do_request(mmc,mrq);
-+
-+ sdr_get_field(SDC_DCRC_STS, SDC_DCRC_STS_POS|SDC_DCRC_STS_NEG, dcrc); /* RO */
-+ if (!ddr) dcrc &= ~SDC_DCRC_STS_NEG;
-+ ERR_MSG("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>",
-+ (result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc,
-+ sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl);
-+
-+ /* Fix me: result is 0, but dcrc is still exist */
-+ if (result == 0 && dcrc == 0) {
-+ goto done;
-+ } else {
-+ /* there is a case: command timeout, and data phase not processed */
-+ if (mrq->data->error != 0 && mrq->data->error != (unsigned int)(-EIO)) {
-+ ERR_MSG("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>",
-+ result, mrq->cmd->error, mrq->data->error);
-+ goto done;
-+ }
-+ }
-+ }
-+
-+ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
-+ cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1);
-+
-+ /* E1 ECO. YD: Reverse */
-+ if (sdr_read32(MSDC_ECO_VER) >= 4) {
-+ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
-+ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
-+ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
-+ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
-+ orig_dat4 = (cur_rxdly1 >> 24) & 0x1F;
-+ orig_dat5 = (cur_rxdly1 >> 16) & 0x1F;
-+ orig_dat6 = (cur_rxdly1 >> 8) & 0x1F;
-+ orig_dat7 = (cur_rxdly1 >> 0) & 0x1F;
-+ } else {
-+ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
-+ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
-+ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
-+ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
-+ orig_dat4 = (cur_rxdly1 >> 0) & 0x1F;
-+ orig_dat5 = (cur_rxdly1 >> 8) & 0x1F;
-+ orig_dat6 = (cur_rxdly1 >> 16) & 0x1F;
-+ orig_dat7 = (cur_rxdly1 >> 24) & 0x1F;
-+ }
-+
-+ if (ddr) {
-+ cur_dat0 = (dcrc & (1 << 0) || dcrc & (1 << 8)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
-+ cur_dat1 = (dcrc & (1 << 1) || dcrc & (1 << 9)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
-+ cur_dat2 = (dcrc & (1 << 2) || dcrc & (1 << 10)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
-+ cur_dat3 = (dcrc & (1 << 3) || dcrc & (1 << 11)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
-+ } else {
-+ cur_dat0 = (dcrc & (1 << 0)) ? ((orig_dat0 + 1) % 32) : orig_dat0;
-+ cur_dat1 = (dcrc & (1 << 1)) ? ((orig_dat1 + 1) % 32) : orig_dat1;
-+ cur_dat2 = (dcrc & (1 << 2)) ? ((orig_dat2 + 1) % 32) : orig_dat2;
-+ cur_dat3 = (dcrc & (1 << 3)) ? ((orig_dat3 + 1) % 32) : orig_dat3;
-+ }
-+ cur_dat4 = (dcrc & (1 << 4)) ? ((orig_dat4 + 1) % 32) : orig_dat4;
-+ cur_dat5 = (dcrc & (1 << 5)) ? ((orig_dat5 + 1) % 32) : orig_dat5;
-+ cur_dat6 = (dcrc & (1 << 6)) ? ((orig_dat6 + 1) % 32) : orig_dat6;
-+ cur_dat7 = (dcrc & (1 << 7)) ? ((orig_dat7 + 1) % 32) : orig_dat7;
-+
-+ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
-+ cur_rxdly1 = (cur_dat4 << 24) | (cur_dat5 << 16) | (cur_dat6 << 8) | (cur_dat7 << 0);
-+
-+ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
-+ sdr_write32(MSDC_DAT_RDDLY1, cur_rxdly1);
-+
-+ } while (++rxdly < 32);
-+
-+done:
-+ return result;
-+}
-+
-+static int msdc_tune_bwrite(struct mmc_host *mmc,struct mmc_request *mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ u32 base = host->base;
-+
-+ u32 wrrdly, cur_wrrdly = 0xffffffff, orig_wrrdly;
-+ u32 dsmpl, cur_dsmpl, orig_dsmpl;
-+ u32 rxdly, cur_rxdly0;
-+ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3;
-+ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3;
-+ int result = -1;
-+ u32 skip = 1;
-+
-+ // MSDC_IOCON_DDR50CKD need to check. [Fix me]
-+
-+ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, orig_wrrdly);
-+ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl );
-+
-+ /* Tune Method 2. just DAT0 */
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1);
-+ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0);
-+
-+ /* E1 ECO. YD: Reverse */
-+ if (sdr_read32(MSDC_ECO_VER) >= 4) {
-+ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F;
-+ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F;
-+ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F;
-+ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F;
-+ } else {
-+ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F;
-+ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F;
-+ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F;
-+ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F;
-+ }
-+
-+ rxdly = 0;
-+ do {
-+ wrrdly = 0;
-+ do {
-+ for (dsmpl = 0; dsmpl < 2; dsmpl++) {
-+ cur_dsmpl = (orig_dsmpl + dsmpl) % 2;
-+ if (skip == 1) {
-+ skip = 0;
-+ continue;
-+ }
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl);
-+
-+ if (host->app_cmd) {
-+ result = msdc_app_cmd(host->mmc, host);
-+ if (result) {
-+ ERR_MSG("TUNE_BWRITE app_cmd<%d> failed", host->mrq->cmd->opcode);
-+ continue;
-+ }
-+ }
-+ result = msdc_do_request(mmc,mrq);
-+
-+ ERR_MSG("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>",
-+ result == 0 ? "PASS" : "FAIL",
-+ cur_dsmpl, cur_wrrdly, cur_rxdly0);
-+
-+ if (result == 0) {
-+ goto done;
-+ }
-+ else {
-+ /* there is a case: command timeout, and data phase not processed */
-+ if (mrq->data->error != (unsigned int)(-EIO)) {
-+ ERR_MSG("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>",
-+ result, mrq->cmd->error, mrq->data->error);
-+ goto done;
-+ }
-+ }
-+ }
-+ cur_wrrdly = (orig_wrrdly + wrrdly + 1) % 32;
-+ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, cur_wrrdly);
-+ } while (++wrrdly < 32);
-+
-+ cur_dat0 = (orig_dat0 + rxdly) % 32; /* only adjust bit-1 for crc */
-+ cur_dat1 = orig_dat1;
-+ cur_dat2 = orig_dat2;
-+ cur_dat3 = orig_dat3;
-+
-+ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0);
-+ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0);
-+ } while (++rxdly < 32);
-+
-+done:
-+ return result;
-+}
-+
-+static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u32 *status)
-+{
-+ struct mmc_command cmd;
-+ struct mmc_request mrq;
-+ u32 err;
-+
-+ memset(&cmd, 0, sizeof(struct mmc_command));
-+ cmd.opcode = MMC_SEND_STATUS;
-+ if (mmc->card) {
-+ cmd.arg = mmc->card->rca << 16;
-+ } else {
-+ ERR_MSG("cmd13 mmc card is null");
-+ cmd.arg = host->app_cmd_arg;
-+ }
-+ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
-+
-+ memset(&mrq, 0, sizeof(struct mmc_request));
-+ mrq.cmd = &cmd; cmd.mrq = &mrq;
-+ cmd.data = NULL;
-+
-+ err = msdc_do_command(host, &cmd, 1, CMD_TIMEOUT);
-+
-+ if (status) {
-+ *status = cmd.resp[0];
-+ }
-+
-+ return err;
-+}
-+
-+static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host)
-+{
-+ u32 err = 0;
-+ u32 status = 0;
-+
-+ do {
-+ err = msdc_get_card_status(mmc, host, &status);
-+ if (err) return err;
-+ /* need cmd12? */
-+ ERR_MSG("cmd<13> resp<0x%x>", status);
-+ } while (R1_CURRENT_STATE(status) == 7);
-+
-+ return err;
-+}
-+
-+/* failed when msdc_do_request */
-+static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+ //u32 base = host->base;
-+ int ret=0, read;
-+
-+ cmd = mrq->cmd;
-+ data = mrq->cmd->data;
-+
-+ read = data->flags & MMC_DATA_READ ? 1 : 0;
-+
-+ if (read) {
-+ if (data->error == (unsigned int)(-EIO)) {
-+ ret = msdc_tune_bread(mmc,mrq);
-+ }
-+ } else {
-+ ret = msdc_check_busy(mmc, host);
-+ if (ret){
-+ ERR_MSG("XXX cmd13 wait program done failed");
-+ return ret;
-+ }
-+ /* CRC and TO */
-+ /* Fix me: don't care card status? */
-+ ret = msdc_tune_bwrite(mmc,mrq);
-+ }
-+
-+ return ret;
-+}
-+
-+/* ops.request */
-+static void msdc_ops_request(struct mmc_host *mmc,struct mmc_request *mrq)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+
-+ //=== for sdio profile ===
-+#if 0 /* --- by chhung */
-+ u32 old_H32, old_L32, new_H32, new_L32;
-+ u32 ticks = 0, opcode = 0, sizes = 0, bRx = 0;
-+#endif /* end of --- */
-+
-+ if(host->mrq){
-+ ERR_MSG("XXX host->mrq<0x%.8x>", (int)host->mrq);
-+ BUG();
-+ }
-+
-+ if (!is_card_present(host) || host->power_mode == MMC_POWER_OFF) {
-+ ERR_MSG("cmd<%d> card<%d> power<%d>", mrq->cmd->opcode, is_card_present(host), host->power_mode);
-+ mrq->cmd->error = (unsigned int)-ENOMEDIUM;
-+
-+#if 1
-+ mrq->done(mrq); // call done directly.
-+#else
-+ mrq->cmd->retries = 0; // please don't retry.
-+ mmc_request_done(mmc, mrq);
-+#endif
-+
-+ return;
-+ }
-+
-+ /* start to process */
-+ spin_lock(&host->lock);
-+#if 0 /* --- by chhung */
-+ if (sdio_pro_enable) { //=== for sdio profile ===
-+ if (mrq->cmd->opcode == 52 || mrq->cmd->opcode == 53) {
-+ GPT_GetCounter64(&old_L32, &old_H32);
-+ }
-+ }
-+#endif /* end of --- */
-+
-+ host->mrq = mrq;
-+
-+ if (msdc_do_request(mmc,mrq)) {
-+ if(host->hw->flags & MSDC_REMOVABLE && mrq->data && mrq->data->error) {
-+ //msdc_tune_request(mmc,mrq);
-+ }
-+ }
-+
-+ /* ==== when request done, check if app_cmd ==== */
-+ if (mrq->cmd->opcode == MMC_APP_CMD) {
-+ host->app_cmd = 1;
-+ host->app_cmd_arg = mrq->cmd->arg; /* save the RCA */
-+ } else {
-+ host->app_cmd = 0;
-+ //host->app_cmd_arg = 0;
-+ }
-+
-+ host->mrq = NULL;
-+
-+#if 0 /* --- by chhung */
-+ //=== for sdio profile ===
-+ if (sdio_pro_enable) {
-+ if (mrq->cmd->opcode == 52 || mrq->cmd->opcode == 53) {
-+ GPT_GetCounter64(&new_L32, &new_H32);
-+ ticks = msdc_time_calc(old_L32, old_H32, new_L32, new_H32);
-+
-+ opcode = mrq->cmd->opcode;
-+ if (mrq->cmd->data) {
-+ sizes = mrq->cmd->data->blocks * mrq->cmd->data->blksz;
-+ bRx = mrq->cmd->data->flags & MMC_DATA_READ ? 1 : 0 ;
-+ } else {
-+ bRx = mrq->cmd->arg & 0x80000000 ? 1 : 0;
-+ }
-+
-+ if (!mrq->cmd->error) {
-+ msdc_performance(opcode, sizes, bRx, ticks);
-+ }
-+ }
-+ }
-+#endif /* end of --- */
-+ spin_unlock(&host->lock);
-+
-+ mmc_request_done(mmc, mrq);
-+
-+ return;
-+}
-+
-+/* called by ops.set_ios */
-+static void msdc_set_buswidth(struct msdc_host *host, u32 width)
-+{
-+ u32 base = host->base;
-+ u32 val = sdr_read32(SDC_CFG);
-+
-+ val &= ~SDC_CFG_BUSWIDTH;
-+
-+ switch (width) {
-+ default:
-+ case MMC_BUS_WIDTH_1:
-+ width = 1;
-+ val |= (MSDC_BUS_1BITS << 16);
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ val |= (MSDC_BUS_4BITS << 16);
-+ break;
-+ case MMC_BUS_WIDTH_8:
-+ val |= (MSDC_BUS_8BITS << 16);
-+ break;
-+ }
-+
-+ sdr_write32(SDC_CFG, val);
-+
-+ N_MSG(CFG, "Bus Width = %d", width);
-+}
-+
-+/* ops.set_ios */
-+static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct msdc_hw *hw=host->hw;
-+ u32 base = host->base;
-+ u32 ddr = 0;
-+
-+#ifdef MT6575_SD_DEBUG
-+ static char *vdd[] = {
-+ "1.50v", "1.55v", "1.60v", "1.65v", "1.70v", "1.80v", "1.90v",
-+ "2.00v", "2.10v", "2.20v", "2.30v", "2.40v", "2.50v", "2.60v",
-+ "2.70v", "2.80v", "2.90v", "3.00v", "3.10v", "3.20v", "3.30v",
-+ "3.40v", "3.50v", "3.60v"
-+ };
-+ static char *power_mode[] = {
-+ "OFF", "UP", "ON"
-+ };
-+ static char *bus_mode[] = {
-+ "UNKNOWN", "OPENDRAIN", "PUSHPULL"
-+ };
-+ static char *timing[] = {
-+ "LEGACY", "MMC_HS", "SD_HS"
-+ };
-+
-+ printk("SET_IOS: CLK(%dkHz), BUS(%s), BW(%u), PWR(%s), VDD(%s), TIMING(%s)",
-+ ios->clock / 1000, bus_mode[ios->bus_mode],
-+ (ios->bus_width == MMC_BUS_WIDTH_4) ? 4 : 1,
-+ power_mode[ios->power_mode], vdd[ios->vdd], timing[ios->timing]);
-+#endif
-+
-+ msdc_set_buswidth(host, ios->bus_width);
-+
-+ /* Power control ??? */
-+ switch (ios->power_mode) {
-+ case MMC_POWER_OFF:
-+ case MMC_POWER_UP:
-+ // msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */
-+ break;
-+ case MMC_POWER_ON:
-+ host->power_mode = MMC_POWER_ON;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ /* Clock control */
-+ if (host->mclk != ios->clock) {
-+ if(ios->clock > 25000000) {
-+ //if (!(host->hw->flags & MSDC_REMOVABLE)) {
-+ INIT_MSG("SD data latch edge<%d>", hw->data_edge);
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, hw->cmd_edge);
-+ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, hw->data_edge);
-+ //} /* for tuning debug */
-+ } else { /* default value */
-+ sdr_write32(MSDC_IOCON, 0x00000000);
-+ // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
-+ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
-+ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
-+ // sdr_write32(MSDC_PAD_TUNE, 0x00000000);
-+ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
-+ }
-+ msdc_set_mclk(host, ddr, ios->clock);
-+ }
-+}
-+
-+/* ops.get_ro */
-+static int msdc_ops_get_ro(struct mmc_host *mmc)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ u32 base = host->base;
-+ unsigned long flags;
-+ int ro = 0;
-+
-+ if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */
-+ spin_lock_irqsave(&host->lock, flags);
-+ ro = (sdr_read32(MSDC_PS) >> 31);
-+ spin_unlock_irqrestore(&host->lock, flags);
-+ }
-+ return ro;
-+}
-+
-+/* ops.get_cd */
-+static int msdc_ops_get_cd(struct mmc_host *mmc)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ u32 base = host->base;
-+ unsigned long flags;
-+ int present = 1;
-+
-+ /* for sdio, MSDC_REMOVABLE not set, always return 1 */
-+ if (!(host->hw->flags & MSDC_REMOVABLE)) {
-+ /* For sdio, read H/W always get<1>, but may timeout some times */
-+#if 1
-+ host->card_inserted = 1;
-+ return 1;
-+#else
-+ host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0;
-+ INIT_MSG("sdio ops_get_cd<%d>", host->card_inserted);
-+ return host->card_inserted;
-+#endif
-+ }
-+
-+ /* MSDC_CD_PIN_EN set for card */
-+ if (host->hw->flags & MSDC_CD_PIN_EN) {
-+ spin_lock_irqsave(&host->lock, flags);
-+#if 0
-+ present = host->card_inserted; /* why not read from H/W: Fix me*/
-+#else
-+ // CD
-+ if (cd_active_low)
-+ present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1;
-+ else
-+ present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 1 : 0;
-+ host->card_inserted = present;
-+#endif
-+ spin_unlock_irqrestore(&host->lock, flags);
-+ } else {
-+ present = 0; /* TODO? Check DAT3 pins for card detection */
-+ }
-+
-+ INIT_MSG("ops_get_cd return<%d>", present);
-+ return present;
-+}
-+
-+/* ops.enable_sdio_irq */
-+static void msdc_ops_enable_sdio_irq(struct mmc_host *mmc, int enable)
-+{
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct msdc_hw *hw = host->hw;
-+ u32 base = host->base;
-+ u32 tmp;
-+
-+ if (hw->flags & MSDC_EXT_SDIO_IRQ) { /* yes for sdio */
-+ if (enable) {
-+ hw->enable_sdio_eirq(); /* combo_sdio_enable_eirq */
-+ } else {
-+ hw->disable_sdio_eirq(); /* combo_sdio_disable_eirq */
-+ }
-+ } else {
-+ ERR_MSG("XXX "); /* so never enter here */
-+ tmp = sdr_read32(SDC_CFG);
-+ /* FIXME. Need to interrupt gap detection */
-+ if (enable) {
-+ tmp |= (SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
-+ } else {
-+ tmp &= ~(SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP);
-+ }
-+ sdr_write32(SDC_CFG, tmp);
-+ }
-+}
-+
-+static struct mmc_host_ops mt_msdc_ops = {
-+ .request = msdc_ops_request,
-+ .set_ios = msdc_ops_set_ios,
-+ .get_ro = msdc_ops_get_ro,
-+ .get_cd = msdc_ops_get_cd,
-+ .enable_sdio_irq = msdc_ops_enable_sdio_irq,
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+/* interrupt handler */
-+/*--------------------------------------------------------------------------*/
-+static irqreturn_t msdc_irq(int irq, void *dev_id)
-+{
-+ struct msdc_host *host = (struct msdc_host *)dev_id;
-+ struct mmc_data *data = host->data;
-+ struct mmc_command *cmd = host->cmd;
-+ u32 base = host->base;
-+
-+ u32 cmdsts = MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO | MSDC_INT_CMDRDY |
-+ MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | MSDC_INT_ACMDRDY |
-+ MSDC_INT_ACMD19_DONE;
-+ u32 datsts = MSDC_INT_DATCRCERR |MSDC_INT_DATTMO;
-+
-+ u32 intsts = sdr_read32(MSDC_INT);
-+ u32 inten = sdr_read32(MSDC_INTEN); inten &= intsts;
-+
-+ sdr_write32(MSDC_INT, intsts); /* clear interrupts */
-+ /* MSG will cause fatal error */
-+
-+ /* card change interrupt */
-+ if (intsts & MSDC_INT_CDSC){
-+ if (mtk_sw_poll)
-+ return IRQ_HANDLED;
-+ IRQ_MSG("MSDC_INT_CDSC irq<0x%.8x>", intsts);
-+#if 0 /* ---/+++ by chhung: fix slot mechanical bounce issue */
-+ tasklet_hi_schedule(&host->card_tasklet);
-+#else
-+ schedule_delayed_work(&host->card_delaywork, HZ);
-+#endif
-+ /* tuning when plug card ? */
-+ }
-+
-+ /* sdio interrupt */
-+ if (intsts & MSDC_INT_SDIOIRQ){
-+ IRQ_MSG("XXX MSDC_INT_SDIOIRQ"); /* seems not sdio irq */
-+ //mmc_signal_sdio_irq(host->mmc);
-+ }
-+
-+ /* transfer complete interrupt */
-+ if (data != NULL) {
-+ if (inten & MSDC_INT_XFER_COMPL) {
-+ data->bytes_xfered = host->dma.xfersz;
-+ complete(&host->xfer_done);
-+ }
-+
-+ if (intsts & datsts) {
-+ /* do basic reset, or stop command will sdc_busy */
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ atomic_set(&host->abort, 1); /* For PIO mode exit */
-+
-+ if (intsts & MSDC_INT_DATTMO){
-+ IRQ_MSG("XXX CMD<%d> MSDC_INT_DATTMO", host->mrq->cmd->opcode);
-+ data->error = (unsigned int)-ETIMEDOUT;
-+ }
-+ else if (intsts & MSDC_INT_DATCRCERR){
-+ IRQ_MSG("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS));
-+ data->error = (unsigned int)-EIO;
-+ }
-+
-+ //if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {
-+ if (host->dma_xfer) {
-+ complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
-+ } /* PIO mode can't do complete, because not init */
-+ }
-+ }
-+
-+ /* command interrupts */
-+ if ((cmd != NULL) && (intsts & cmdsts)) {
-+ if ((intsts & MSDC_INT_CMDRDY) || (intsts & MSDC_INT_ACMDRDY) ||
-+ (intsts & MSDC_INT_ACMD19_DONE)) {
-+ u32 *rsp = &cmd->resp[0];
-+
-+ switch (host->cmd_rsp) {
-+ case RESP_NONE:
-+ break;
-+ case RESP_R2:
-+ *rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2);
-+ *rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0);
-+ break;
-+ default: /* Response types 1, 3, 4, 5, 6, 7(1b) */
-+ if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE)) {
-+ *rsp = sdr_read32(SDC_ACMD_RESP);
-+ } else {
-+ *rsp = sdr_read32(SDC_RESP0);
-+ }
-+ break;
-+ }
-+ } else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) {
-+ if(intsts & MSDC_INT_ACMDCRCERR){
-+ IRQ_MSG("XXX CMD<%d> MSDC_INT_ACMDCRCERR",cmd->opcode);
-+ }
-+ else {
-+ IRQ_MSG("XXX CMD<%d> MSDC_INT_RSPCRCERR",cmd->opcode);
-+ }
-+ cmd->error = (unsigned int)-EIO;
-+ } else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) {
-+ if(intsts & MSDC_INT_ACMDTMO){
-+ IRQ_MSG("XXX CMD<%d> MSDC_INT_ACMDTMO",cmd->opcode);
-+ }
-+ else {
-+ IRQ_MSG("XXX CMD<%d> MSDC_INT_CMDTMO",cmd->opcode);
-+ }
-+ cmd->error = (unsigned int)-ETIMEDOUT;
-+ msdc_reset();
-+ msdc_clr_fifo();
-+ msdc_clr_int();
-+ }
-+ complete(&host->cmd_done);
-+ }
-+
-+ /* mmc irq interrupts */
-+ if (intsts & MSDC_INT_MMCIRQ) {
-+ printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS));
-+ }
-+
-+#ifdef MT6575_SD_DEBUG
-+ {
-+ msdc_int_reg *int_reg = (msdc_int_reg*)&intsts;
-+ N_MSG(INT, "IRQ_EVT(0x%x): MMCIRQ(%d) CDSC(%d), ACRDY(%d), ACTMO(%d), ACCRE(%d) AC19DN(%d)",
-+ intsts,
-+ int_reg->mmcirq,
-+ int_reg->cdsc,
-+ int_reg->atocmdrdy,
-+ int_reg->atocmdtmo,
-+ int_reg->atocmdcrc,
-+ int_reg->atocmd19done);
-+ N_MSG(INT, "IRQ_EVT(0x%x): SDIO(%d) CMDRDY(%d), CMDTMO(%d), RSPCRC(%d), CSTA(%d)",
-+ intsts,
-+ int_reg->sdioirq,
-+ int_reg->cmdrdy,
-+ int_reg->cmdtmo,
-+ int_reg->rspcrc,
-+ int_reg->csta);
-+ N_MSG(INT, "IRQ_EVT(0x%x): XFCMP(%d) DXDONE(%d), DATTMO(%d), DATCRC(%d), DMAEMP(%d)",
-+ intsts,
-+ int_reg->xfercomp,
-+ int_reg->dxferdone,
-+ int_reg->dattmo,
-+ int_reg->datcrc,
-+ int_reg->dmaqempty);
-+
-+ }
-+#endif
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+/* platform_driver members */
-+/*--------------------------------------------------------------------------*/
-+/* called by msdc_drv_probe/remove */
-+static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
-+{
-+ struct msdc_hw *hw = host->hw;
-+ u32 base = host->base;
-+
-+ /* for sdio, not set */
-+ if ((hw->flags & MSDC_CD_PIN_EN) == 0) {
-+ /* Pull down card detection pin since it is not avaiable */
-+ /*
-+ if (hw->config_gpio_pin)
-+ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
-+ */
-+ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
-+ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
-+ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
-+ return;
-+ }
-+
-+ N_MSG(CFG, "CD IRQ Eanable(%d)", enable);
-+
-+ if (enable) {
-+ if (hw->enable_cd_eirq) { /* not set, never enter */
-+ hw->enable_cd_eirq();
-+ } else {
-+ /* card detection circuit relies on the core power so that the core power
-+ * shouldn't be turned off. Here adds a reference count to keep
-+ * the core power alive.
-+ */
-+ //msdc_vcore_on(host); //did in msdc_init_hw()
-+
-+ if (hw->config_gpio_pin) /* NULL */
-+ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
-+
-+ sdr_set_field(MSDC_PS, MSDC_PS_CDDEBOUNCE, DEFAULT_DEBOUNCE);
-+ sdr_set_bits(MSDC_PS, MSDC_PS_CDEN);
-+ sdr_set_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
-+ sdr_set_bits(SDC_CFG, SDC_CFG_INSWKUP); /* not in document! Fix me */
-+ }
-+ } else {
-+ if (hw->disable_cd_eirq) {
-+ hw->disable_cd_eirq();
-+ } else {
-+ if (hw->config_gpio_pin) /* NULL */
-+ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN);
-+
-+ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP);
-+ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
-+ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC);
-+
-+ /* Here decreases a reference count to core power since card
-+ * detection circuit is shutdown.
-+ */
-+ //msdc_vcore_off(host);
-+ }
-+ }
-+}
-+
-+/* called by msdc_drv_probe */
-+static void msdc_init_hw(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+ struct msdc_hw *hw = host->hw;
-+
-+#ifdef MT6575_SD_DEBUG
-+ msdc_reg[host->id] = (struct msdc_regs *)host->base;
-+#endif
-+
-+ /* Power on */
-+#if 0 /* --- by chhung */
-+ msdc_vcore_on(host);
-+ msdc_pin_reset(host, MSDC_PIN_PULL_UP);
-+ msdc_select_clksrc(host, hw->clk_src);
-+ enable_clock(PERI_MSDC0_PDN + host->id, "SD");
-+ msdc_vdd_on(host);
-+#endif /* end of --- */
-+ /* Configure to MMC/SD mode */
-+ sdr_set_field(MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC);
-+
-+ /* Reset */
-+ msdc_reset();
-+ msdc_clr_fifo();
-+
-+ /* Disable card detection */
-+ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN);
-+
-+ /* Disable and clear all interrupts */
-+ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
-+ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
-+
-+#if 1
-+ /* reset tuning parameter */
-+ sdr_write32(MSDC_PAD_CTL0, 0x00090000);
-+ sdr_write32(MSDC_PAD_CTL1, 0x000A0000);
-+ sdr_write32(MSDC_PAD_CTL2, 0x000A0000);
-+ // sdr_write32(MSDC_PAD_TUNE, 0x00000000);
-+ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward
-+ // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000);
-+ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward
-+ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000);
-+ sdr_write32(MSDC_IOCON, 0x00000000);
-+#if 0 // use MT7620 default value: 0x403c004f
-+ sdr_write32(MSDC_PATCH_BIT0, 0x003C000F); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
-+#endif
-+
-+ if (sdr_read32(MSDC_ECO_VER) >= 4) {
-+ if (host->id == 1) {
-+ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1);
-+ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP, 1);
-+
-+ /* internal clock: latch read data */
-+ sdr_set_bits(MSDC_PATCH_BIT0, MSDC_PATCH_BIT_CKGEN_CK);
-+ }
-+ }
-+#endif
-+
-+ /* for safety, should clear SDC_CFG.SDIO_INT_DET_EN & set SDC_CFG.SDIO in
-+ pre-loader,uboot,kernel drivers. and SDC_CFG.SDIO_INT_DET_EN will be only
-+ set when kernel driver wants to use SDIO bus interrupt */
-+ /* Configure to enable SDIO mode. it's must otherwise sdio cmd5 failed */
-+ sdr_set_bits(SDC_CFG, SDC_CFG_SDIO);
-+
-+ /* disable detect SDIO device interupt function */
-+ sdr_clr_bits(SDC_CFG, SDC_CFG_SDIOIDE);
-+
-+ /* eneable SMT for glitch filter */
-+ sdr_set_bits(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKSMT);
-+ sdr_set_bits(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDSMT);
-+ sdr_set_bits(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATSMT);
-+
-+#if 1
-+ /* set clk, cmd, dat pad driving */
-+ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, hw->clk_drv);
-+ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, hw->clk_drv);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, hw->cmd_drv);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, hw->cmd_drv);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, hw->dat_drv);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, hw->dat_drv);
-+#else
-+ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 0);
-+ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 0);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 0);
-+ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 0);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 0);
-+ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 0);
-+#endif
-+
-+ /* set sampling edge */
-+
-+ /* write crc timeout detection */
-+ sdr_set_field(MSDC_PATCH_BIT0, 1 << 30, 1);
-+
-+ /* Configure to default data timeout */
-+ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, DEFAULT_DTOC);
-+
-+ msdc_set_buswidth(host, MMC_BUS_WIDTH_1);
-+
-+ N_MSG(FUC, "init hardware done!");
-+}
-+
-+/* called by msdc_drv_remove */
-+static void msdc_deinit_hw(struct msdc_host *host)
-+{
-+ u32 base = host->base;
-+
-+ /* Disable and clear all interrupts */
-+ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN));
-+ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT));
-+
-+ /* Disable card detection */
-+ msdc_enable_cd_irq(host, 0);
-+ // msdc_set_power_mode(host, MMC_POWER_OFF); /* make sure power down */ /* --- by chhung */
-+}
-+
-+/* init gpd and bd list in msdc_drv_probe */
-+static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma)
-+{
-+ gpd_t *gpd = dma->gpd;
-+ bd_t *bd = dma->bd;
-+ bd_t *ptr, *prev;
-+
-+ /* we just support one gpd */
-+ int bdlen = MAX_BD_PER_GPD;
-+
-+ /* init the 2 gpd */
-+ memset(gpd, 0, sizeof(gpd_t) * 2);
-+ //gpd->next = (void *)virt_to_phys(gpd + 1); /* pointer to a null gpd, bug! kmalloc <-> virt_to_phys */
-+ //gpd->next = (dma->gpd_addr + 1); /* bug */
-+ gpd->next = (void *)((u32)dma->gpd_addr + sizeof(gpd_t));
-+
-+ //gpd->intr = 0;
-+ gpd->bdp = 1; /* hwo, cs, bd pointer */
-+ //gpd->ptr = (void*)virt_to_phys(bd);
-+ gpd->ptr = (void *)dma->bd_addr; /* physical address */
-+
-+ memset(bd, 0, sizeof(bd_t) * bdlen);
-+ ptr = bd + bdlen - 1;
-+ //ptr->eol = 1; /* 0 or 1 [Fix me]*/
-+ //ptr->next = 0;
-+
-+ while (ptr != bd) {
-+ prev = ptr - 1;
-+ prev->next = (void *)(dma->bd_addr + sizeof(bd_t) *(ptr - bd));
-+ ptr = prev;
-+ }
-+}
-+
-+static int msdc_drv_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ __iomem void *base;
-+ struct mmc_host *mmc;
-+ struct resource *mem;
-+ struct msdc_host *host;
-+ struct msdc_hw *hw;
-+ int ret, irq;
-+
-+ pdev->dev.platform_data = &msdc0_hw;
-+
-+ /* Allocate MMC host for this device */
-+ mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev);
-+ if (!mmc) return -ENOMEM;
-+
-+ hw = (struct msdc_hw*)pdev->dev.platform_data;
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_irq(pdev, 0);
-+
-+ //BUG_ON((!hw) || (!mem) || (irq < 0)); /* --- by chhung */
-+
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ /* Set host parameters to mmc */
-+ mmc->ops = &mt_msdc_ops;
-+ mmc->f_min = HOST_MIN_MCLK;
-+ mmc->f_max = HOST_MAX_MCLK;
-+ mmc->ocr_avail = MSDC_OCR_AVAIL;
-+
-+ /* For sd card: MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED,
-+ For sdio : MSDC_EXT_SDIO_IRQ | MSDC_HIGHSPEED */
-+ if (hw->flags & MSDC_HIGHSPEED) {
-+ mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
-+ }
-+ if (hw->data_pins == 4) { /* current data_pins are all 4*/
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
-+ } else if (hw->data_pins == 8) {
-+ mmc->caps |= MMC_CAP_8_BIT_DATA;
-+ }
-+ if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ))
-+ mmc->caps |= MMC_CAP_SDIO_IRQ; /* yes for sdio */
-+
-+ cd_active_low = !of_property_read_bool(pdev->dev.of_node, "mediatek,cd-high");
-+ mtk_sw_poll = of_property_read_bool(pdev->dev.of_node, "mediatek,cd-poll");
-+
-+ if (mtk_sw_poll)
-+ mmc->caps |= MMC_CAP_NEEDS_POLL;
-+
-+ /* MMC core transfer sizes tunable parameters */
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(3,10,0)
-+ mmc->max_segs = MAX_HW_SGMTS;
-+#else
-+ mmc->max_hw_segs = MAX_HW_SGMTS;
-+ mmc->max_phys_segs = MAX_PHY_SGMTS;
-+#endif
-+ mmc->max_seg_size = MAX_SGMT_SZ;
-+ mmc->max_blk_size = HOST_MAX_BLKSZ;
-+ mmc->max_req_size = MAX_REQ_SZ;
-+ mmc->max_blk_count = mmc->max_req_size;
-+
-+ host = mmc_priv(mmc);
-+ host->hw = hw;
-+ host->mmc = mmc;
-+ host->id = pdev->id;
-+ host->error = 0;
-+ host->irq = irq;
-+ host->base = (unsigned long) base;
-+ host->mclk = 0; /* mclk: the request clock of mmc sub-system */
-+ host->hclk = hclks[hw->clk_src]; /* hclk: clock of clock source to msdc controller */
-+ host->sclk = 0; /* sclk: the really clock after divition */
-+ host->pm_state = PMSG_RESUME;
-+ host->suspend = 0;
-+ host->core_clkon = 0;
-+ host->card_clkon = 0;
-+ host->core_power = 0;
-+ host->power_mode = MMC_POWER_OFF;
-+// host->card_inserted = hw->flags & MSDC_REMOVABLE ? 0 : 1;
-+ host->timeout_ns = 0;
-+ host->timeout_clks = DEFAULT_DTOC * 65536;
-+
-+ host->mrq = NULL;
-+ //init_MUTEX(&host->sem); /* we don't need to support multiple threads access */
-+
-+ host->dma.used_gpd = 0;
-+ host->dma.used_bd = 0;
-+
-+ /* using dma_alloc_coherent*/ /* todo: using 1, for all 4 slots */
-+ host->dma.gpd = dma_alloc_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), &host->dma.gpd_addr, GFP_KERNEL);
-+ host->dma.bd = dma_alloc_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), &host->dma.bd_addr, GFP_KERNEL);
-+ BUG_ON((!host->dma.gpd) || (!host->dma.bd));
-+ msdc_init_gpd_bd(host, &host->dma);
-+ /*for emmc*/
-+ msdc_6575_host[pdev->id] = host;
-+
-+#if 0
-+ tasklet_init(&host->card_tasklet, msdc_tasklet_card, (ulong)host);
-+#else
-+ INIT_DELAYED_WORK(&host->card_delaywork, msdc_tasklet_card);
-+#endif
-+ spin_lock_init(&host->lock);
-+ msdc_init_hw(host);
-+
-+ ret = request_irq((unsigned int)irq, msdc_irq, IRQF_TRIGGER_LOW, dev_name(&pdev->dev), host);
-+ if (ret) goto release;
-+ // mt65xx_irq_unmask(irq); /* --- by chhung */
-+
-+ if (hw->flags & MSDC_CD_PIN_EN) { /* not set for sdio */
-+ if (hw->request_cd_eirq) { /* not set for MT6575 */
-+ hw->request_cd_eirq(msdc_eirq_cd, (void*)host); /* msdc_eirq_cd will not be used! */
-+ }
-+ }
-+
-+ if (hw->request_sdio_eirq) /* set to combo_sdio_request_eirq() for WIFI */
-+ hw->request_sdio_eirq(msdc_eirq_sdio, (void*)host); /* msdc_eirq_sdio() will be called when EIRQ */
-+
-+ if (hw->register_pm) {/* yes for sdio */
-+#ifdef CONFIG_PM
-+ hw->register_pm(msdc_pm, (void*)host); /* combo_sdio_register_pm() */
-+#endif
-+ if(hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */
-+ ERR_MSG("MSDC_SYS_SUSPEND and register_pm both set");
-+ }
-+ //mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* pm not controlled by system but by client. */ /* --- by chhung */
-+ }
-+
-+ platform_set_drvdata(pdev, mmc);
-+
-+ ret = mmc_add_host(mmc);
-+ if (ret) goto free_irq;
-+
-+ /* Config card detection pin and enable interrupts */
-+ if (hw->flags & MSDC_CD_PIN_EN) { /* set for card */
-+ msdc_enable_cd_irq(host, 1);
-+ } else {
-+ msdc_enable_cd_irq(host, 0);
-+ }
-+
-+ return 0;
-+
-+free_irq:
-+ free_irq(irq, host);
-+release:
-+ platform_set_drvdata(pdev, NULL);
-+ msdc_deinit_hw(host);
-+
-+#if 0
-+ tasklet_kill(&host->card_tasklet);
-+#else
-+ cancel_delayed_work_sync(&host->card_delaywork);
-+#endif
-+
-+ if (mem)
-+ release_mem_region(mem->start, mem->end - mem->start + 1);
-+
-+ mmc_free_host(mmc);
-+
-+ return ret;
-+}
-+
-+/* 4 device share one driver, using "drvdata" to show difference */
-+static int msdc_drv_remove(struct platform_device *pdev)
-+{
-+ struct mmc_host *mmc;
-+ struct msdc_host *host;
-+ struct resource *mem;
-+
-+ mmc = platform_get_drvdata(pdev);
-+ BUG_ON(!mmc);
-+
-+ host = mmc_priv(mmc);
-+ BUG_ON(!host);
-+
-+ ERR_MSG("removed !!!");
-+
-+ platform_set_drvdata(pdev, NULL);
-+ mmc_remove_host(host->mmc);
-+ msdc_deinit_hw(host);
-+
-+#if 0
-+ tasklet_kill(&host->card_tasklet);
-+#else
-+ cancel_delayed_work_sync(&host->card_delaywork);
-+#endif
-+ free_irq(host->irq, host);
-+
-+ dma_free_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), host->dma.gpd, host->dma.gpd_addr);
-+ dma_free_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), host->dma.bd, host->dma.bd_addr);
-+
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ if (mem)
-+ release_mem_region(mem->start, mem->end - mem->start + 1);
-+
-+ mmc_free_host(host->mmc);
-+
-+ return 0;
-+}
-+
-+/* Fix me: Power Flow */
-+#ifdef CONFIG_PM
-+static int msdc_drv_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ int ret = 0;
-+ struct mmc_host *mmc = platform_get_drvdata(pdev);
-+ struct msdc_host *host = mmc_priv(mmc);
-+
-+ if (mmc && state.event == PM_EVENT_SUSPEND && (host->hw->flags & MSDC_SYS_SUSPEND)) { /* will set for card */
-+ msdc_pm(state, (void*)host);
-+ }
-+
-+ return ret;
-+}
-+
-+static int msdc_drv_resume(struct platform_device *pdev)
-+{
-+ int ret = 0;
-+ struct mmc_host *mmc = platform_get_drvdata(pdev);
-+ struct msdc_host *host = mmc_priv(mmc);
-+ struct pm_message state;
-+
-+ state.event = PM_EVENT_RESUME;
-+ if (mmc && (host->hw->flags & MSDC_SYS_SUSPEND)) {/* will set for card */
-+ msdc_pm(state, (void*)host);
-+ }
-+
-+ /* This mean WIFI not controller by PM */
-+
-+ return ret;
-+}
-+#endif
-+
-+static const struct of_device_id mt7620_sdhci_match[] = {
-+ { .compatible = "ralink,mt7620-sdhci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
-+
-+static struct platform_driver mt_msdc_driver = {
-+ .probe = msdc_drv_probe,
-+ .remove = msdc_drv_remove,
-+#ifdef CONFIG_PM
-+ .suspend = msdc_drv_suspend,
-+ .resume = msdc_drv_resume,
-+#endif
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7620_sdhci_match,
-+ },
-+};
-+
-+/*--------------------------------------------------------------------------*/
-+/* module init/exit */
-+/*--------------------------------------------------------------------------*/
-+static int __init mt_msdc_init(void)
-+{
-+ int ret;
-+/* +++ by chhung */
-+ u32 reg;
-+
-+#if defined (CONFIG_MTD_ANY_RALINK)
-+ extern int ra_check_flash_type(void);
-+ if(ra_check_flash_type() == 2) { /* NAND */
-+ printk("%s: !!!!! SDXC Module Initialize Fail !!!!!", __func__);
-+ return 0;
-+ }
-+#endif
-+ printk("MTK MSDC device init.\n");
-+ mtk_sd_device.dev.platform_data = &msdc0_hw;
-+if (ralink_soc == MT762X_SOC_MT7620A || ralink_soc == MT762X_SOC_MT7621AT) {
-+//#if defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621)
-+ reg = sdr_read32((volatile u32*)(RALINK_SYSCTL_BASE + 0x60)) & ~(0x3<<18);
-+//#if defined (CONFIG_RALINK_MT7620)
-+ if (ralink_soc == MT762X_SOC_MT7620A)
-+ reg |= 0x1<<18;
-+//#endif
-+} else {
-+//#elif defined (CONFIG_RALINK_MT7628)
-+ /* TODO: maybe omitted when RAether already toggle AGPIO_CFG */
-+ reg = sdr_read32((volatile u32*)(RALINK_SYSCTL_BASE + 0x3c));
-+ reg |= 0x1e << 16;
-+ sdr_write32((volatile u32*)(RALINK_SYSCTL_BASE + 0x3c), reg);
-+
-+ reg = sdr_read32((volatile u32*)(RALINK_SYSCTL_BASE + 0x60)) & ~(0x3<<10);
-+#if defined (CONFIG_MTK_MMC_EMMC_8BIT)
-+ reg |= 0x3<<26 | 0x3<<28 | 0x3<<30;
-+ msdc0_hw.data_pins = 8,
-+#endif
-+//#endif
-+}
-+ sdr_write32((volatile u32*)(RALINK_SYSCTL_BASE + 0x60), reg);
-+ //platform_device_register(&mtk_sd_device);
-+/* end of +++ */
-+
-+ ret = platform_driver_register(&mt_msdc_driver);
-+ if (ret) {
-+ printk(KERN_ERR DRV_NAME ": Can't register driver");
-+ return ret;
-+ }
-+ printk(KERN_INFO DRV_NAME ": MediaTek MT6575 MSDC Driver\n");
-+
-+#if defined (MT6575_SD_DEBUG)
-+ msdc_debug_proc_init();
-+#endif
-+ return 0;
-+}
-+
-+static void __exit mt_msdc_exit(void)
-+{
-+// platform_device_unregister(&mtk_sd_device);
-+ platform_driver_unregister(&mt_msdc_driver);
-+}
-+
-+module_init(mt_msdc_init);
-+module_exit(mt_msdc_exit);
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("MediaTek MT6575 SD/MMC Card Driver");
-+MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
-+
-+EXPORT_SYMBOL(msdc_6575_host);
diff --git a/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch
deleted file mode 100644
index 3362d4b5fc..0000000000
--- a/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch
+++ /dev/null
@@ -1,628 +0,0 @@
-From f1c4d9e622c800e1f38b3818f933ec7597d1ccfb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:29:51 +0100
-Subject: [PATCH 47/53] DMA: ralink: add rt2880 dma engine
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/dma/Kconfig | 6 +
- drivers/dma/Makefile | 1 +
- drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++
- include/linux/dmaengine.h | 1 +
- 4 files changed, 585 insertions(+)
- create mode 100644 drivers/dma/ralink-gdma.c
-
---- a/drivers/dma/Kconfig
-+++ b/drivers/dma/Kconfig
-@@ -40,6 +40,12 @@ config ASYNC_TX_ENABLE_CHANNEL_SWITCH
- config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
- bool
-
-+config DMA_RALINK
-+ tristate "RALINK DMA support"
-+ depends on RALINK && SOC_MT7620
-+ select DMA_ENGINE
-+ select DMA_VIRTUAL_CHANNELS
-+
- config DMA_ENGINE
- bool
-
---- a/drivers/dma/Makefile
-+++ b/drivers/dma/Makefile
-@@ -65,5 +65,6 @@ obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-
- obj-$(CONFIG_TI_EDMA) += edma.o
- obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
- obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
-+obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o
-
- obj-y += xilinx/
---- /dev/null
-+++ b/drivers/dma/ralink-gdma.c
-@@ -0,0 +1,577 @@
-+/*
-+ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de>
-+ * GDMA4740 DMAC support
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/dmaengine.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/irq.h>
-+#include <linux/of_dma.h>
-+
-+#include "virt-dma.h"
-+
-+#define GDMA_NR_CHANS 16
-+
-+#define GDMA_REG_SRC_ADDR(x) (0x00 + (x) * 0x10)
-+#define GDMA_REG_DST_ADDR(x) (0x04 + (x) * 0x10)
-+
-+#define GDMA_REG_CTRL0(x) (0x08 + (x) * 0x10)
-+#define GDMA_REG_CTRL0_TX_MASK 0xffff
-+#define GDMA_REG_CTRL0_TX_SHIFT 16
-+#define GDMA_REG_CTRL0_CURR_MASK 0xff
-+#define GDMA_REG_CTRL0_CURR_SHIFT 8
-+#define GDMA_REG_CTRL0_SRC_ADDR_FIXED BIT(7)
-+#define GDMA_REG_CTRL0_DST_ADDR_FIXED BIT(6)
-+#define GDMA_REG_CTRL0_BURST_MASK 0x7
-+#define GDMA_REG_CTRL0_BURST_SHIFT 3
-+#define GDMA_REG_CTRL0_DONE_INT BIT(2)
-+#define GDMA_REG_CTRL0_ENABLE BIT(1)
-+#define GDMA_REG_CTRL0_HW_MODE 0
-+
-+#define GDMA_REG_CTRL1(x) (0x0c + (x) * 0x10)
-+#define GDMA_REG_CTRL1_SEG_MASK 0xf
-+#define GDMA_REG_CTRL1_SEG_SHIFT 22
-+#define GDMA_REG_CTRL1_REQ_MASK 0x3f
-+#define GDMA_REG_CTRL1_SRC_REQ_SHIFT 16
-+#define GDMA_REG_CTRL1_DST_REQ_SHIFT 8
-+#define GDMA_REG_CTRL1_CONTINOUS BIT(14)
-+#define GDMA_REG_CTRL1_NEXT_MASK 0x1f
-+#define GDMA_REG_CTRL1_NEXT_SHIFT 3
-+#define GDMA_REG_CTRL1_COHERENT BIT(2)
-+#define GDMA_REG_CTRL1_FAIL BIT(1)
-+#define GDMA_REG_CTRL1_MASK BIT(0)
-+
-+#define GDMA_REG_UNMASK_INT 0x200
-+#define GDMA_REG_DONE_INT 0x204
-+
-+#define GDMA_REG_GCT 0x220
-+#define GDMA_REG_GCT_CHAN_MASK 0x3
-+#define GDMA_REG_GCT_CHAN_SHIFT 3
-+#define GDMA_REG_GCT_VER_MASK 0x3
-+#define GDMA_REG_GCT_VER_SHIFT 1
-+#define GDMA_REG_GCT_ARBIT_RR BIT(0)
-+
-+enum gdma_dma_transfer_size {
-+ GDMA_TRANSFER_SIZE_4BYTE = 0,
-+ GDMA_TRANSFER_SIZE_8BYTE = 1,
-+ GDMA_TRANSFER_SIZE_16BYTE = 2,
-+ GDMA_TRANSFER_SIZE_32BYTE = 3,
-+};
-+
-+struct gdma_dma_sg {
-+ dma_addr_t addr;
-+ unsigned int len;
-+};
-+
-+struct gdma_dma_desc {
-+ struct virt_dma_desc vdesc;
-+
-+ enum dma_transfer_direction direction;
-+ bool cyclic;
-+
-+ unsigned int num_sgs;
-+ struct gdma_dma_sg sg[];
-+};
-+
-+struct gdma_dmaengine_chan {
-+ struct virt_dma_chan vchan;
-+ unsigned int id;
-+
-+ dma_addr_t fifo_addr;
-+ unsigned int transfer_shift;
-+
-+ struct gdma_dma_desc *desc;
-+ unsigned int next_sg;
-+};
-+
-+struct gdma_dma_dev {
-+ struct dma_device ddev;
-+ void __iomem *base;
-+ struct clk *clk;
-+
-+ struct gdma_dmaengine_chan chan[GDMA_NR_CHANS];
-+};
-+
-+static struct gdma_dma_dev *gdma_dma_chan_get_dev(
-+ struct gdma_dmaengine_chan *chan)
-+{
-+ return container_of(chan->vchan.chan.device, struct gdma_dma_dev,
-+ ddev);
-+}
-+
-+static struct gdma_dmaengine_chan *to_gdma_dma_chan(struct dma_chan *c)
-+{
-+ return container_of(c, struct gdma_dmaengine_chan, vchan.chan);
-+}
-+
-+static struct gdma_dma_desc *to_gdma_dma_desc(struct virt_dma_desc *vdesc)
-+{
-+ return container_of(vdesc, struct gdma_dma_desc, vdesc);
-+}
-+
-+static inline uint32_t gdma_dma_read(struct gdma_dma_dev *dma_dev,
-+ unsigned int reg)
-+{
-+ return readl(dma_dev->base + reg);
-+}
-+
-+static inline void gdma_dma_write(struct gdma_dma_dev *dma_dev,
-+ unsigned reg, uint32_t val)
-+{
-+ //printk("gdma --> %p = 0x%08X\n", dma_dev->base + reg, val);
-+ writel(val, dma_dev->base + reg);
-+}
-+
-+static inline void gdma_dma_write_mask(struct gdma_dma_dev *dma_dev,
-+ unsigned int reg, uint32_t val, uint32_t mask)
-+{
-+ uint32_t tmp;
-+
-+ tmp = gdma_dma_read(dma_dev, reg);
-+ tmp &= ~mask;
-+ tmp |= val;
-+ gdma_dma_write(dma_dev, reg, tmp);
-+}
-+
-+static struct gdma_dma_desc *gdma_dma_alloc_desc(unsigned int num_sgs)
-+{
-+ return kzalloc(sizeof(struct gdma_dma_desc) +
-+ sizeof(struct gdma_dma_sg) * num_sgs, GFP_ATOMIC);
-+}
-+
-+static enum gdma_dma_transfer_size gdma_dma_maxburst(u32 maxburst)
-+{
-+ if (maxburst <= 7)
-+ return GDMA_TRANSFER_SIZE_4BYTE;
-+ else if (maxburst <= 15)
-+ return GDMA_TRANSFER_SIZE_8BYTE;
-+ else if (maxburst <= 31)
-+ return GDMA_TRANSFER_SIZE_16BYTE;
-+
-+ return GDMA_TRANSFER_SIZE_32BYTE;
-+}
-+
-+static int gdma_dma_slave_config(struct dma_chan *c,
-+ const struct dma_slave_config *config)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ enum gdma_dma_transfer_size transfer_size;
-+ uint32_t flags;
-+ uint32_t ctrl0, ctrl1;
-+
-+ switch (config->direction) {
-+ case DMA_MEM_TO_DEV:
-+ ctrl1 = 32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT;
-+ ctrl1 |= config->slave_id << GDMA_REG_CTRL1_DST_REQ_SHIFT;
-+ flags = GDMA_REG_CTRL0_DST_ADDR_FIXED;
-+ transfer_size = gdma_dma_maxburst(config->dst_maxburst);
-+ chan->fifo_addr = config->dst_addr;
-+ break;
-+
-+ case DMA_DEV_TO_MEM:
-+ ctrl1 = config->slave_id << GDMA_REG_CTRL1_SRC_REQ_SHIFT;
-+ ctrl1 |= 32 << GDMA_REG_CTRL1_DST_REQ_SHIFT;
-+ flags = GDMA_REG_CTRL0_SRC_ADDR_FIXED;
-+ transfer_size = gdma_dma_maxburst(config->src_maxburst);
-+ chan->fifo_addr = config->src_addr;
-+ break;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ chan->transfer_shift = 1 + transfer_size;
-+
-+ ctrl0 = flags | GDMA_REG_CTRL0_HW_MODE;
-+ ctrl0 |= GDMA_REG_CTRL0_DONE_INT;
-+
-+ ctrl1 &= ~(GDMA_REG_CTRL1_NEXT_MASK << GDMA_REG_CTRL1_NEXT_SHIFT);
-+ ctrl1 |= chan->id << GDMA_REG_CTRL1_NEXT_SHIFT;
-+ ctrl1 |= GDMA_REG_CTRL1_FAIL;
-+ ctrl1 &= ~GDMA_REG_CTRL1_CONTINOUS;
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0);
-+ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1);
-+
-+ return 0;
-+}
-+
-+static int gdma_dma_terminate_all(struct dma_chan *c)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ unsigned long flags;
-+ LIST_HEAD(head);
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0,
-+ GDMA_REG_CTRL0_ENABLE);
-+ chan->desc = NULL;
-+ vchan_get_all_descriptors(&chan->vchan, &head);
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+
-+ vchan_dma_desc_free_list(&chan->vchan, &head);
-+
-+ return 0;
-+}
-+
-+static int gdma_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
-+ unsigned long arg)
-+{
-+ struct dma_slave_config *config = (struct dma_slave_config *)arg;
-+
-+ switch (cmd) {
-+ case DMA_SLAVE_CONFIG:
-+ return gdma_dma_slave_config(chan, config);
-+ case DMA_TERMINATE_ALL:
-+ return gdma_dma_terminate_all(chan);
-+ default:
-+ return -ENOSYS;
-+ }
-+}
-+
-+static int gdma_dma_start_transfer(struct gdma_dmaengine_chan *chan)
-+{
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ dma_addr_t src_addr, dst_addr;
-+ struct virt_dma_desc *vdesc;
-+ struct gdma_dma_sg *sg;
-+
-+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0,
-+ GDMA_REG_CTRL0_ENABLE);
-+
-+ if (!chan->desc) {
-+ vdesc = vchan_next_desc(&chan->vchan);
-+ if (!vdesc)
-+ return 0;
-+ chan->desc = to_gdma_dma_desc(vdesc);
-+ chan->next_sg = 0;
-+ }
-+
-+ if (chan->next_sg == chan->desc->num_sgs)
-+ chan->next_sg = 0;
-+
-+ sg = &chan->desc->sg[chan->next_sg];
-+
-+ if (chan->desc->direction == DMA_MEM_TO_DEV) {
-+ src_addr = sg->addr;
-+ dst_addr = chan->fifo_addr;
-+ } else {
-+ src_addr = chan->fifo_addr;
-+ dst_addr = sg->addr;
-+ }
-+ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr);
-+ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr);
-+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id),
-+ (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | GDMA_REG_CTRL0_ENABLE,
-+ GDMA_REG_CTRL0_TX_MASK << GDMA_REG_CTRL0_TX_SHIFT);
-+ chan->next_sg++;
-+ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL1(chan->id), 0, GDMA_REG_CTRL1_MASK);
-+
-+ return 0;
-+}
-+
-+static void gdma_dma_chan_irq(struct gdma_dmaengine_chan *chan)
-+{
-+ spin_lock(&chan->vchan.lock);
-+ if (chan->desc) {
-+ if (chan->desc && chan->desc->cyclic) {
-+ vchan_cyclic_callback(&chan->desc->vdesc);
-+ } else {
-+ if (chan->next_sg == chan->desc->num_sgs) {
-+ chan->desc = NULL;
-+ vchan_cookie_complete(&chan->desc->vdesc);
-+ }
-+ }
-+ }
-+ gdma_dma_start_transfer(chan);
-+ spin_unlock(&chan->vchan.lock);
-+}
-+
-+static irqreturn_t gdma_dma_irq(int irq, void *devid)
-+{
-+ struct gdma_dma_dev *dma_dev = devid;
-+ uint32_t unmask, done;
-+ unsigned int i;
-+
-+ unmask = gdma_dma_read(dma_dev, GDMA_REG_UNMASK_INT);
-+ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, unmask);
-+ done = gdma_dma_read(dma_dev, GDMA_REG_DONE_INT);
-+
-+ for (i = 0; i < GDMA_NR_CHANS; ++i)
-+ if (done & BIT(i))
-+ gdma_dma_chan_irq(&dma_dev->chan[i]);
-+ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, done);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void gdma_dma_issue_pending(struct dma_chan *c)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ if (vchan_issue_pending(&chan->vchan) && !chan->desc)
-+ gdma_dma_start_transfer(chan);
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *gdma_dma_prep_slave_sg(
-+ struct dma_chan *c, struct scatterlist *sgl,
-+ unsigned int sg_len, enum dma_transfer_direction direction,
-+ unsigned long flags, void *context)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_desc *desc;
-+ struct scatterlist *sg;
-+ unsigned int i;
-+
-+ desc = gdma_dma_alloc_desc(sg_len);
-+ if (!desc)
-+ return NULL;
-+
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ desc->sg[i].addr = sg_dma_address(sg);
-+ desc->sg[i].len = sg_dma_len(sg);
-+ }
-+
-+ desc->num_sgs = sg_len;
-+ desc->direction = direction;
-+ desc->cyclic = false;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+}
-+
-+static struct dma_async_tx_descriptor *gdma_dma_prep_dma_cyclic(
-+ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
-+ size_t period_len, enum dma_transfer_direction direction,
-+ unsigned long flags, void *context)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct gdma_dma_desc *desc;
-+ unsigned int num_periods, i;
-+
-+ if (buf_len % period_len)
-+ return NULL;
-+
-+ num_periods = buf_len / period_len;
-+
-+ desc = gdma_dma_alloc_desc(num_periods);
-+ if (!desc)
-+ return NULL;
-+
-+ for (i = 0; i < num_periods; i++) {
-+ desc->sg[i].addr = buf_addr;
-+ desc->sg[i].len = period_len;
-+ buf_addr += period_len;
-+ }
-+
-+ desc->num_sgs = num_periods;
-+ desc->direction = direction;
-+ desc->cyclic = true;
-+
-+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
-+}
-+
-+static size_t gdma_dma_desc_residue(struct gdma_dmaengine_chan *chan,
-+ struct gdma_dma_desc *desc, unsigned int next_sg)
-+{
-+ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan);
-+ unsigned int residue, count;
-+ unsigned int i;
-+
-+ residue = 0;
-+
-+ for (i = next_sg; i < desc->num_sgs; i++)
-+ residue += desc->sg[i].len;
-+
-+ if (next_sg != 0) {
-+ count = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id));
-+ count >>= GDMA_REG_CTRL0_CURR_SHIFT;
-+ count &= GDMA_REG_CTRL0_CURR_MASK;
-+ residue += count << chan->transfer_shift;
-+ }
-+
-+ return residue;
-+}
-+
-+static enum dma_status gdma_dma_tx_status(struct dma_chan *c,
-+ dma_cookie_t cookie, struct dma_tx_state *state)
-+{
-+ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c);
-+ struct virt_dma_desc *vdesc;
-+ enum dma_status status;
-+ unsigned long flags;
-+
-+ status = dma_cookie_status(c, cookie, state);
-+ if (status == DMA_SUCCESS || !state)
-+ return status;
-+
-+ spin_lock_irqsave(&chan->vchan.lock, flags);
-+ vdesc = vchan_find_desc(&chan->vchan, cookie);
-+ if (cookie == chan->desc->vdesc.tx.cookie) {
-+ state->residue = gdma_dma_desc_residue(chan, chan->desc,
-+ chan->next_sg);
-+ } else if (vdesc) {
-+ state->residue = gdma_dma_desc_residue(chan,
-+ to_gdma_dma_desc(vdesc), 0);
-+ } else {
-+ state->residue = 0;
-+ }
-+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
-+
-+ return status;
-+}
-+
-+static int gdma_dma_alloc_chan_resources(struct dma_chan *c)
-+{
-+ return 0;
-+}
-+
-+static void gdma_dma_free_chan_resources(struct dma_chan *c)
-+{
-+ vchan_free_chan_resources(to_virt_chan(c));
-+}
-+
-+static void gdma_dma_desc_free(struct virt_dma_desc *vdesc)
-+{
-+ kfree(container_of(vdesc, struct gdma_dma_desc, vdesc));
-+}
-+
-+static struct dma_chan *
-+of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec,
-+ struct of_dma *ofdma)
-+{
-+ struct gdma_dma_dev *dma_dev = ofdma->of_dma_data;
-+ unsigned int request = dma_spec->args[0];
-+
-+ if (request >= GDMA_NR_CHANS)
-+ return NULL;
-+
-+ return dma_get_slave_channel(&(dma_dev->chan[request].vchan.chan));
-+}
-+
-+static int gdma_dma_probe(struct platform_device *pdev)
-+{
-+ struct gdma_dmaengine_chan *chan;
-+ struct gdma_dma_dev *dma_dev;
-+ struct dma_device *dd;
-+ unsigned int i;
-+ struct resource *res;
-+ uint32_t gct;
-+ int ret;
-+ int irq;
-+
-+
-+ dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev), GFP_KERNEL);
-+ if (!dma_dev)
-+ return -EINVAL;
-+
-+ dd = &dma_dev->ddev;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ dma_dev->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(dma_dev->base))
-+ return PTR_ERR(dma_dev->base);
-+
-+ dma_cap_set(DMA_SLAVE, dd->cap_mask);
-+ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
-+ dd->device_alloc_chan_resources = gdma_dma_alloc_chan_resources;
-+ dd->device_free_chan_resources = gdma_dma_free_chan_resources;
-+ dd->device_tx_status = gdma_dma_tx_status;
-+ dd->device_issue_pending = gdma_dma_issue_pending;
-+ dd->device_prep_slave_sg = gdma_dma_prep_slave_sg;
-+ dd->device_prep_dma_cyclic = gdma_dma_prep_dma_cyclic;
-+ dd->device_control = gdma_dma_control;
-+ dd->dev = &pdev->dev;
-+ dd->chancnt = GDMA_NR_CHANS;
-+ INIT_LIST_HEAD(&dd->channels);
-+
-+ for (i = 0; i < dd->chancnt; i++) {
-+ chan = &dma_dev->chan[i];
-+ chan->id = i;
-+ chan->vchan.desc_free = gdma_dma_desc_free;
-+ vchan_init(&chan->vchan, dd);
-+ }
-+
-+ ret = dma_async_device_register(dd);
-+ if (ret)
-+ return ret;
-+
-+ ret = of_dma_controller_register(pdev->dev.of_node,
-+ of_dma_xlate_by_chan_id, dma_dev);
-+ if (ret)
-+ goto err_unregister;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ ret = request_irq(irq, gdma_dma_irq, 0, dev_name(&pdev->dev), dma_dev);
-+ if (ret)
-+ goto err_unregister;
-+
-+ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, 0);
-+ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, BIT(dd->chancnt) - 1);
-+
-+ gct = gdma_dma_read(dma_dev, GDMA_REG_GCT);
-+ dev_info(&pdev->dev, "revision: %d, channels: %d\n",
-+ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK,
-+ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) & GDMA_REG_GCT_CHAN_MASK));
-+ platform_set_drvdata(pdev, dma_dev);
-+
-+ gdma_dma_write(dma_dev, GDMA_REG_GCT, GDMA_REG_GCT_ARBIT_RR);
-+
-+ return 0;
-+
-+err_unregister:
-+ dma_async_device_unregister(dd);
-+ return ret;
-+}
-+
-+static int gdma_dma_remove(struct platform_device *pdev)
-+{
-+ struct gdma_dma_dev *dma_dev = platform_get_drvdata(pdev);
-+ int irq = platform_get_irq(pdev, 0);
-+
-+ free_irq(irq, dma_dev);
-+ of_dma_controller_free(pdev->dev.of_node);
-+ dma_async_device_unregister(&dma_dev->ddev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id gdma_of_match_table[] = {
-+ { .compatible = "ralink,rt2880-gdma" },
-+ { },
-+};
-+
-+static struct platform_driver gdma_dma_driver = {
-+ .probe = gdma_dma_probe,
-+ .remove = gdma_dma_remove,
-+ .driver = {
-+ .name = "gdma-rt2880",
-+ .owner = THIS_MODULE,
-+ .of_match_table = gdma_of_match_table,
-+ },
-+};
-+module_platform_driver(gdma_dma_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
-+MODULE_DESCRIPTION("GDMA4740 DMA driver");
-+MODULE_LICENSE("GPLv2");
---- a/include/linux/dmaengine.h
-+++ b/include/linux/dmaengine.h
-@@ -496,6 +496,7 @@ static inline void dma_set_unmap(struct
- struct dmaengine_unmap_data *
- dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags);
- void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap);
-+struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
- #else
- static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx,
- struct dmaengine_unmap_data *unmap)
diff --git a/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch
deleted file mode 100644
index e329c316d7..0000000000
--- a/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch
+++ /dev/null
@@ -1,765 +0,0 @@
-From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:31:47 +0100
-Subject: [PATCH 48/53] asoc: add mt7620 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 2 +
- sound/soc/Kconfig | 1 +
- sound/soc/Makefile | 1 +
- sound/soc/ralink/Kconfig | 15 ++
- sound/soc/ralink/Makefile | 11 +
- sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++
- sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++
- 7 files changed, 699 insertions(+)
- create mode 100644 sound/soc/ralink/Kconfig
- create mode 100644 sound/soc/ralink/Makefile
- create mode 100644 sound/soc/ralink/mt7620-i2s.c
- create mode 100644 sound/soc/ralink/mt7620-wm8960.c
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -15,6 +15,7 @@
- #include <linux/of_fdt.h>
- #include <linux/kernel.h>
- #include <linux/bootmem.h>
-+#include <linux/module.h>
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
-
-@@ -26,6 +27,7 @@
- #include "common.h"
-
- __iomem void *rt_sysc_membase;
-+EXPORT_SYMBOL(rt_sysc_membase);
- __iomem void *rt_memc_membase;
-
- __iomem void *plat_of_remap_node(const char *node)
---- a/sound/soc/Kconfig
-+++ b/sound/soc/Kconfig
-@@ -53,6 +53,7 @@ source "sound/soc/mxs/Kconfig"
- source "sound/soc/pxa/Kconfig"
- source "sound/soc/qcom/Kconfig"
- source "sound/soc/rockchip/Kconfig"
-+source "sound/soc/ralink/Kconfig"
- source "sound/soc/samsung/Kconfig"
- source "sound/soc/sh/Kconfig"
- source "sound/soc/sirf/Kconfig"
---- a/sound/soc/Makefile
-+++ b/sound/soc/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
- obj-$(CONFIG_SND_SOC) += pxa/
- obj-$(CONFIG_SND_SOC) += qcom/
- obj-$(CONFIG_SND_SOC) += rockchip/
-+obj-$(CONFIG_SND_SOC) += ralink/
- obj-$(CONFIG_SND_SOC) += samsung/
- obj-$(CONFIG_SND_SOC) += sh/
- obj-$(CONFIG_SND_SOC) += sirf/
---- /dev/null
-+++ b/sound/soc/ralink/Kconfig
-@@ -0,0 +1,15 @@
-+config SND_MT7620_SOC_I2S
-+ depends on SOC_MT7620 && SND_SOC
-+ select SND_SOC_GENERIC_DMAENGINE_PCM
-+ tristate "SoC Audio (I2S protocol) for Ralink MT7620 SoC"
-+ help
-+ Say Y if you want to use I2S protocol and I2S codec on Ingenic MT7620
-+ based boards.
-+
-+config SND_MT7620_SOC_WM8960
-+ tristate "SoC Audio support for Ralink WM8960"
-+ select SND_MT7620_SOC_I2S
-+ select SND_SOC_WM8960
-+ help
-+ Say Y if you want to add support for ASoC audio on the Qi LB60 board
-+ a.k.a Qi Ben NanoNote.
---- /dev/null
-+++ b/sound/soc/ralink/Makefile
-@@ -0,0 +1,11 @@
-+#
-+# Jz4740 Platform Support
-+#
-+snd-soc-mt7620-i2s-objs := mt7620-i2s.o
-+
-+obj-$(CONFIG_SND_MT7620_SOC_I2S) += snd-soc-mt7620-i2s.o
-+
-+# Jz4740 Machine Support
-+snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o
-+
-+obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o
---- /dev/null
-+++ b/sound/soc/ralink/mt7620-i2s.c
-@@ -0,0 +1,436 @@
-+/*
-+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include <linux/delay.h>
-+
-+#include <linux/dma-mapping.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+#include <sound/initval.h>
-+#include <sound/dmaengine_pcm.h>
-+
-+#include <ralink_regs.h>
-+
-+#define I2S_REG_CFG0 0x00
-+#define I2S_REG_CFG0_EN BIT(31)
-+#define I2S_REG_CFG0_DMA_EN BIT(30)
-+#define I2S_REG_CFG0_BYTE_SWAP BIT(28)
-+#define I2S_REG_CFG0_TX_EN BIT(24)
-+#define I2S_REG_CFG0_RX_EN BIT(20)
-+#define I2S_REG_CFG0_SLAVE BIT(16)
-+#define I2S_REG_CFG0_RX_THRES 12
-+#define I2S_REG_CFG0_TX_THRES 4
-+#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \
-+ (4 << I2S_REG_CFG0_TX_THRES)
-+
-+#define I2S_REG_INT_STATUS 0x04
-+#define I2S_REG_INT_EN 0x08
-+#define I2S_REG_FF_STATUS 0x0c
-+#define I2S_REG_WREG 0x10
-+#define I2S_REG_RREG 0x14
-+#define I2S_REG_CFG1 0x18
-+
-+#define I2S_REG_DIVCMP 0x20
-+#define I2S_REG_DIVINT 0x24
-+#define I2S_REG_CLK_EN BIT(31)
-+
-+struct mt7620_i2s {
-+ struct resource *mem;
-+ void __iomem *base;
-+ dma_addr_t phys_base;
-+
-+ struct snd_dmaengine_dai_dma_data playback_dma_data;
-+ struct snd_dmaengine_dai_dma_data capture_dma_data;
-+};
-+
-+static inline uint32_t mt7620_i2s_read(const struct mt7620_i2s *i2s,
-+ unsigned int reg)
-+{
-+ return readl(i2s->base + reg);
-+}
-+
-+static inline void mt7620_i2s_write(const struct mt7620_i2s *i2s,
-+ unsigned int reg, uint32_t value)
-+{
-+ //printk("i2s --> %p = 0x%08X\n", i2s->base + reg, value);
-+ writel(value, i2s->base + reg);
-+}
-+
-+static int mt7620_i2s_startup(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t cfg;
-+
-+ if (dai->active)
-+ return 0;
-+
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+ cfg |= I2S_REG_CFG0_EN;
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+
-+ return 0;
-+}
-+
-+static void mt7620_i2s_shutdown(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t cfg;
-+
-+ if (dai->active)
-+ return;
-+
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+ cfg &= ~I2S_REG_CFG0_EN;
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+}
-+
-+static int mt7620_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ uint32_t cfg;
-+ uint32_t mask;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ mask = I2S_REG_CFG0_TX_EN;
-+ else
-+ mask = I2S_REG_CFG0_RX_EN;
-+
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ case SNDRV_PCM_TRIGGER_RESUME:
-+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+ cfg |= mask;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ case SNDRV_PCM_TRIGGER_SUSPEND:
-+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+ cfg &= ~mask;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (cfg & (I2S_REG_CFG0_TX_EN | I2S_REG_CFG0_RX_EN))
-+ cfg |= I2S_REG_CFG0_DMA_EN;
-+ else
-+ cfg &= ~I2S_REG_CFG0_DMA_EN;
-+
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+
-+ return 0;
-+}
-+
-+static int mt7620_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t cfg;
-+
-+ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0);
-+
-+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+ case SND_SOC_DAIFMT_CBS_CFS:
-+ cfg |= I2S_REG_CFG0_SLAVE;
-+ break;
-+ case SND_SOC_DAIFMT_CBM_CFM:
-+ cfg &= ~I2S_REG_CFG0_SLAVE;
-+ break;
-+ case SND_SOC_DAIFMT_CBM_CFS:
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+ case SND_SOC_DAIFMT_I2S:
-+ case SND_SOC_DAIFMT_MSB:
-+ cfg &= ~I2S_REG_CFG0_BYTE_SWAP;
-+ break;
-+ case SND_SOC_DAIFMT_LSB:
-+ cfg |= I2S_REG_CFG0_BYTE_SWAP;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+ case SND_SOC_DAIFMT_NB_NF:
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg);
-+
-+ return 0;
-+}
-+
-+static int mt7620_i2s_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
-+{
-+
-+ return 0;
-+}
-+
-+unsigned long i2sMaster_inclk_int[11] = {
-+ 78, 56, 52, 39, 28, 26, 19, 14, 13, 9, 6};
-+unsigned long i2sMaster_inclk_comp[11] = {
-+ 64, 352, 42, 32, 176, 21, 272, 88, 10, 455, 261};
-+
-+
-+static int mt7620_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
-+ unsigned int freq, int dir)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+
-+ printk("Internal REFCLK with fractional division\n");
-+
-+ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]);
-+ mt7620_i2s_write(i2s, I2S_REG_DIVCMP,
-+ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN);
-+
-+/* struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ struct clk *parent;
-+ int ret = 0;
-+
-+ switch (clk_id) {
-+ case JZ4740_I2S_CLKSRC_EXT:
-+ parent = clk_get(NULL, "ext");
-+ clk_set_parent(i2s->clk_i2s, parent);
-+ break;
-+ case JZ4740_I2S_CLKSRC_PLL:
-+ parent = clk_get(NULL, "pll half");
-+ clk_set_parent(i2s->clk_i2s, parent);
-+ ret = clk_set_rate(i2s->clk_i2s, freq);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ clk_put(parent);
-+
-+ return ret;*/
-+ return 0;
-+}
-+
-+static void mt7620_i2c_init_pcm_config(struct mt7620_i2s *i2s)
-+{
-+ struct snd_dmaengine_dai_dma_data *dma_data;
-+
-+ /* Playback */
-+ dma_data = &i2s->playback_dma_data;
-+ dma_data->maxburst = 16;
-+ dma_data->slave_id = 2; //JZ4740_DMA_TYPE_AIC_TRANSMIT;
-+ dma_data->addr = i2s->phys_base + I2S_REG_WREG;
-+
-+ /* Capture */
-+ dma_data = &i2s->capture_dma_data;
-+ dma_data->maxburst = 16;
-+ dma_data->slave_id = 3; //JZ4740_DMA_TYPE_AIC_RECEIVE;
-+ dma_data->addr = i2s->phys_base + I2S_REG_RREG;
-+}
-+
-+static int mt7620_i2s_dai_probe(struct snd_soc_dai *dai)
-+{
-+ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-+ uint32_t data;
-+
-+ mt7620_i2c_init_pcm_config(i2s);
-+ dai->playback_dma_data = &i2s->playback_dma_data;
-+ dai->capture_dma_data = &i2s->capture_dma_data;
-+
-+ /* set share pins to i2s/gpio mode and i2c mode */
-+ data = rt_sysc_r32(0x60);
-+ data &= 0xFFFFFFE2;
-+ data |= 0x00000018;
-+ rt_sysc_w32(data, 0x60);
-+
-+ printk("Internal REFCLK with fractional division\n");
-+
-+ mt7620_i2s_write(i2s, I2S_REG_CFG0, I2S_REG_CFG0_DFT_THRES);
-+ mt7620_i2s_write(i2s, I2S_REG_CFG1, 0);
-+ mt7620_i2s_write(i2s, I2S_REG_INT_EN, 0);
-+
-+ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]);
-+ mt7620_i2s_write(i2s, I2S_REG_DIVCMP,
-+ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN);
-+
-+ return 0;
-+}
-+
-+static int mt7620_i2s_dai_remove(struct snd_soc_dai *dai)
-+{
-+ return 0;
-+}
-+
-+static const struct snd_soc_dai_ops mt7620_i2s_dai_ops = {
-+ .startup = mt7620_i2s_startup,
-+ .shutdown = mt7620_i2s_shutdown,
-+ .trigger = mt7620_i2s_trigger,
-+ .hw_params = mt7620_i2s_hw_params,
-+ .set_fmt = mt7620_i2s_set_fmt,
-+ .set_sysclk = mt7620_i2s_set_sysclk,
-+};
-+
-+#define JZ4740_I2S_FMTS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
-+ SNDRV_PCM_FMTBIT_S24_LE)
-+
-+static struct snd_soc_dai_driver mt7620_i2s_dai = {
-+ .probe = mt7620_i2s_dai_probe,
-+ .remove = mt7620_i2s_dai_remove,
-+ .playback = {
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .rates = SNDRV_PCM_RATE_8000_48000,
-+ .formats = JZ4740_I2S_FMTS,
-+ },
-+ .capture = {
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rates = SNDRV_PCM_RATE_8000_48000,
-+ .formats = JZ4740_I2S_FMTS,
-+ },
-+ .symmetric_rates = 1,
-+ .ops = &mt7620_i2s_dai_ops,
-+};
-+
-+static const struct snd_pcm_hardware mt7620_pcm_hardware = {
-+ .info = SNDRV_PCM_INFO_MMAP |
-+ SNDRV_PCM_INFO_MMAP_VALID |
-+ SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
-+ .period_bytes_min = PAGE_SIZE,
-+ .period_bytes_max = 64 * 1024,
-+ .periods_min = 2,
-+ .periods_max = 128,
-+ .buffer_bytes_max = 128 * 1024,
-+ .fifo_size = 32,
-+};
-+
-+static const struct snd_dmaengine_pcm_config mt7620_dmaengine_pcm_config = {
-+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
-+ .pcm_hardware = &mt7620_pcm_hardware,
-+ .prealloc_buffer_size = 256 * PAGE_SIZE,
-+};
-+
-+static const struct snd_soc_component_driver mt7620_i2s_component = {
-+ .name = "mt7620-i2s",
-+};
-+
-+static int mt7620_i2s_dev_probe(struct platform_device *pdev)
-+{
-+ struct mt7620_i2s *i2s;
-+ int ret;
-+
-+ snd_dmaengine_pcm_register(&pdev->dev,
-+ &mt7620_dmaengine_pcm_config,
-+ SND_DMAENGINE_PCM_FLAG_COMPAT);
-+
-+ i2s = kzalloc(sizeof(*i2s), GFP_KERNEL);
-+ if (!i2s)
-+ return -ENOMEM;
-+
-+ i2s->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!i2s->mem) {
-+ ret = -ENOENT;
-+ goto err_free;
-+ }
-+
-+ i2s->mem = request_mem_region(i2s->mem->start, resource_size(i2s->mem),
-+ pdev->name);
-+ if (!i2s->mem) {
-+ ret = -EBUSY;
-+ goto err_free;
-+ }
-+
-+ i2s->base = ioremap_nocache(i2s->mem->start, resource_size(i2s->mem));
-+ if (!i2s->base) {
-+ ret = -EBUSY;
-+ goto err_release_mem_region;
-+ }
-+
-+ i2s->phys_base = i2s->mem->start;
-+
-+ platform_set_drvdata(pdev, i2s);
-+ ret = snd_soc_register_component(&pdev->dev, &mt7620_i2s_component,
-+ &mt7620_i2s_dai, 1);
-+
-+ if (!ret) {
-+ dev_err(&pdev->dev, "loaded\n");
-+ return ret;
-+ }
-+
-+ dev_err(&pdev->dev, "Failed to register DAI\n");
-+ iounmap(i2s->base);
-+
-+err_release_mem_region:
-+ release_mem_region(i2s->mem->start, resource_size(i2s->mem));
-+err_free:
-+ kfree(i2s);
-+
-+ return ret;
-+}
-+
-+static int mt7620_i2s_dev_remove(struct platform_device *pdev)
-+{
-+ struct mt7620_i2s *i2s = platform_get_drvdata(pdev);
-+
-+ snd_soc_unregister_component(&pdev->dev);
-+
-+ iounmap(i2s->base);
-+ release_mem_region(i2s->mem->start, resource_size(i2s->mem));
-+
-+ kfree(i2s);
-+
-+ snd_dmaengine_pcm_unregister(&pdev->dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7620_i2s_match[] = {
-+ { .compatible = "ralink,mt7620a-i2s" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt7620_i2s_match);
-+
-+static struct platform_driver mt7620_i2s_driver = {
-+ .probe = mt7620_i2s_dev_probe,
-+ .remove = mt7620_i2s_dev_remove,
-+ .driver = {
-+ .name = "mt7620-i2s",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt7620_i2s_match,
-+ },
-+};
-+
-+module_platform_driver(mt7620_i2s_driver);
-+
-+MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
-+MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:mt7620-i2s");
---- /dev/null
-+++ b/sound/soc/ralink/mt7620-wm8960.c
-@@ -0,0 +1,233 @@
-+/*
-+ * Copyright 2013 Freescale Semiconductor, Inc.
-+ *
-+ * Based on mt7620-sgtl5000.c
-+ * Copyright 2012 Freescale Semiconductor, Inc.
-+ * Copyright 2012 Linaro Ltd.
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/i2c.h>
-+#include <linux/slab.h>
-+#include <sound/soc.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc-dapm.h>
-+#include <linux/pinctrl/consumer.h>
-+
-+#include "../codecs/wm8960.h"
-+
-+#define DAI_NAME_SIZE 32
-+
-+struct mt7620_wm8960_data {
-+ struct snd_soc_dai_link dai;
-+ struct snd_soc_card card;
-+ char codec_dai_name[DAI_NAME_SIZE];
-+ char platform_name[DAI_NAME_SIZE];
-+ unsigned int clk_frequency;
-+};
-+
-+struct mt7620_priv {
-+ struct platform_device *pdev;
-+};
-+static struct mt7620_priv card_priv;
-+
-+static const struct snd_soc_dapm_widget mt7620_wm8960_dapm_widgets[] = {
-+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
-+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
-+ SND_SOC_DAPM_MIC("AMIC", NULL),
-+ SND_SOC_DAPM_MIC("DMIC", NULL),
-+};
-+
-+static int sample_rate = 44100;
-+static snd_pcm_format_t sample_format = SNDRV_PCM_FORMAT_S16_LE;
-+
-+static int mt7620_hifi_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params)
-+{
-+ sample_rate = params_rate(params);
-+ sample_format = params_format(params);
-+
-+ return 0;
-+}
-+
-+static struct snd_soc_ops mt7620_hifi_ops = {
-+ .hw_params = mt7620_hifi_hw_params,
-+};
-+
-+static int mt7620_wm8960_set_bias_level(struct snd_soc_card *card,
-+ struct snd_soc_dapm_context *dapm,
-+ enum snd_soc_bias_level level)
-+{
-+ struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
-+ struct mt7620_priv *priv = &card_priv;
-+ struct mt7620_wm8960_data *data = snd_soc_card_get_drvdata(card);
-+ struct device *dev = &priv->pdev->dev;
-+ int ret;
-+
-+ if (dapm->dev != codec_dai->dev)
-+ return 0;
-+
-+ switch (level) {
-+ case SND_SOC_BIAS_PREPARE:
-+ if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
-+ }
-+ break;
-+
-+ case SND_SOC_BIAS_STANDBY:
-+ if (dapm->bias_level == SND_SOC_BIAS_PREPARE) {
-+ ret = snd_soc_dai_set_sysclk(codec_dai,
-+ WM8960_SYSCLK_MCLK, data->clk_frequency,
-+ SND_SOC_CLOCK_IN);
-+ if (ret < 0) {
-+ dev_err(dev,
-+ "failed to switch away from FLL: %d\n",
-+ ret);
-+ return ret;
-+ }
-+ }
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7620_wm8960_late_probe(struct snd_soc_card *card)
-+{
-+ struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
-+ struct mt7620_priv *priv = &card_priv;
-+ struct mt7620_wm8960_data *data = snd_soc_card_get_drvdata(card);
-+ struct device *dev = &priv->pdev->dev;
-+ int ret;
-+
-+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8960_SYSCLK_MCLK,
-+ data->clk_frequency, SND_SOC_CLOCK_IN);
-+ if (ret < 0)
-+ dev_err(dev, "failed to set sysclk in %s\n", __func__);
-+
-+ return ret;
-+}
-+
-+static int mt7620_wm8960_probe(struct platform_device *pdev)
-+{
-+ struct device_node *i2s_np, *codec_np;
-+ struct platform_device *i2s_pdev;
-+ struct mt7620_priv *priv = &card_priv;
-+ struct i2c_client *codec_dev;
-+ struct mt7620_wm8960_data *data;
-+ int ret;
-+
-+ priv->pdev = pdev;
-+
-+ i2s_np = of_parse_phandle(pdev->dev.of_node, "i2s-controller", 0);
-+ codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
-+ if (!i2s_np || !codec_np) {
-+ dev_err(&pdev->dev, "phandle missing or invalid\n");
-+ ret = -EINVAL;
-+ goto fail;
-+ }
-+
-+ i2s_pdev = of_find_device_by_node(i2s_np);
-+ if (!i2s_pdev) {
-+ dev_err(&pdev->dev, "failed to find SSI platform device\n");
-+ ret = -EINVAL;
-+ goto fail;
-+ }
-+ codec_dev = of_find_i2c_device_by_node(codec_np);
-+ if (!codec_dev || !codec_dev->dev.driver) {
-+ dev_err(&pdev->dev, "failed to find codec platform device\n");
-+ ret = -EINVAL;
-+ goto fail;
-+ }
-+
-+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-+ if (!data) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ data->clk_frequency = 12000000;
-+ data->dai.name = "HiFi";
-+ data->dai.stream_name = "HiFi";
-+ data->dai.codec_dai_name = "wm8960-hifi";
-+ data->dai.codec_of_node = codec_np;
-+ data->dai.cpu_dai_name = dev_name(&i2s_pdev->dev);
-+ data->dai.platform_of_node = i2s_np;
-+ data->dai.ops = &mt7620_hifi_ops;
-+ data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-+ SND_SOC_DAIFMT_CBM_CFM;
-+
-+ data->card.dev = &pdev->dev;
-+ ret = snd_soc_of_parse_card_name(&data->card, "model");
-+ if (ret)
-+ goto fail;
-+ ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
-+ if (ret)
-+ goto fail;
-+ data->card.num_links = 1;
-+ data->card.dai_link = &data->dai;
-+ data->card.dapm_widgets = mt7620_wm8960_dapm_widgets;
-+ data->card.num_dapm_widgets = ARRAY_SIZE(mt7620_wm8960_dapm_widgets);
-+
-+ data->card.late_probe = mt7620_wm8960_late_probe;
-+ data->card.set_bias_level = mt7620_wm8960_set_bias_level;
-+
-+ platform_set_drvdata(pdev, &data->card);
-+ snd_soc_card_set_drvdata(&data->card, data);
-+
-+ ret = devm_snd_soc_register_card(&pdev->dev, &data->card);
-+ if (ret) {
-+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
-+ goto fail;
-+ }
-+
-+ of_node_put(i2s_np);
-+ of_node_put(codec_np);
-+
-+ return 0;
-+fail:
-+ if (i2s_np)
-+ of_node_put(i2s_np);
-+ if (codec_np)
-+ of_node_put(codec_np);
-+
-+ return ret;
-+}
-+
-+static int mt7620_wm8960_remove(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id mt7620_wm8960_dt_ids[] = {
-+ { .compatible = "mediatek,mt7620-audio-wm8960", },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, mt7620_wm8960_dt_ids);
-+
-+static struct platform_driver mt7620_wm8960_driver = {
-+ .driver = {
-+ .name = "mt7620-wm8960",
-+ .owner = THIS_MODULE,
-+ .pm = &snd_soc_pm_ops,
-+ .of_match_table = mt7620_wm8960_dt_ids,
-+ },
-+ .probe = mt7620_wm8960_probe,
-+ .remove = mt7620_wm8960_remove,
-+};
-+module_platform_driver(mt7620_wm8960_driver);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("Freescale i.MX WM8962 ASoC machine driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:mt7620-wm8962");
diff --git a/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch b/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch
deleted file mode 100644
index e1127dc2d4..0000000000
--- a/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From 77fe64de72317c0e090d82056e7a6a073f2972b4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 05:24:42 +0000
-Subject: [PATCH 49/53] watchdog: add MT7621 support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/watchdog/Kconfig | 7 ++
- drivers/watchdog/Makefile | 1 +
- drivers/watchdog/mt7621_wdt.c | 185 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 193 insertions(+)
- create mode 100644 drivers/watchdog/mt7621_wdt.c
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1346,6 +1346,13 @@ config RALINK_WDT
- help
- Hardware driver for the Ralink SoC Watchdog Timer.
-
-+config MT7621_WDT
-+ tristate "Mediatek SoC watchdog"
-+ select WATCHDOG_CORE
-+ depends on SOC_MT7620 || SOC_MT7621
-+ help
-+ Hardware driver for the Ralink SoC Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -68,6 +68,7 @@ obj-$(CONFIG_MESON_WATCHDOG) += meson_wd
- obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
- obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
- obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
-+obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
-
- # AVR32 Architecture
- obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/mt7621_wdt.c
-@@ -0,0 +1,185 @@
-+/*
-+ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
-+ *
-+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ *
-+ * This driver was based on: drivers/watchdog/softdog.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/watchdog.h>
-+#include <linux/miscdevice.h>
-+#include <linux/moduleparam.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define SYSC_RSTSTAT 0x38
-+#define WDT_RST_CAUSE BIT(1)
-+
-+#define RALINK_WDT_TIMEOUT 30
-+
-+#define TIMER_REG_TMRSTAT 0x00
-+#define TIMER_REG_TMR1LOAD 0x24
-+#define TIMER_REG_TMR1CTL 0x20
-+
-+#define TMR1CTL_ENABLE BIT(7)
-+#define TMR1CTL_RESTART BIT(9)
-+
-+static void __iomem *mt762x_wdt_base;
-+
-+static bool nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, bool, 0);
-+MODULE_PARM_DESC(nowayout,
-+ "Watchdog cannot be stopped once started (default="
-+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+static inline void rt_wdt_w32(unsigned reg, u32 val)
-+{
-+ iowrite32(val, mt762x_wdt_base + reg);
-+}
-+
-+static inline u32 rt_wdt_r32(unsigned reg)
-+{
-+ return ioread32(mt762x_wdt_base + reg);
-+}
-+
-+static int mt762x_wdt_ping(struct watchdog_device *w)
-+{
-+ rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
-+{
-+ w->timeout = t;
-+ rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000);
-+ mt762x_wdt_ping(w);
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_start(struct watchdog_device *w)
-+{
-+ u32 t;
-+
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << 16);
-+ mt762x_wdt_set_timeout(w, w->timeout);
-+
-+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t |= TMR1CTL_ENABLE;
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_stop(struct watchdog_device *w)
-+{
-+ u32 t;
-+
-+ mt762x_wdt_ping(w);
-+
-+ t = rt_wdt_r32(TIMER_REG_TMR1CTL);
-+ t &= ~TMR1CTL_ENABLE;
-+ rt_wdt_w32(TIMER_REG_TMR1CTL, t);
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_bootcause(void)
-+{
-+ if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
-+ return WDIOF_CARDRESET;
-+
-+ return 0;
-+}
-+
-+static struct watchdog_info mt762x_wdt_info = {
-+ .identity = "Mediatek Watchdog",
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
-+};
-+
-+static struct watchdog_ops mt762x_wdt_ops = {
-+ .owner = THIS_MODULE,
-+ .start = mt762x_wdt_start,
-+ .stop = mt762x_wdt_stop,
-+ .ping = mt762x_wdt_ping,
-+ .set_timeout = mt762x_wdt_set_timeout,
-+};
-+
-+static struct watchdog_device mt762x_wdt_dev = {
-+ .info = &mt762x_wdt_info,
-+ .ops = &mt762x_wdt_ops,
-+ .min_timeout = 1,
-+};
-+
-+static int mt762x_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ int ret;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ mt762x_wdt_base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(mt762x_wdt_base))
-+ return PTR_ERR(mt762x_wdt_base);
-+
-+ device_reset(&pdev->dev);
-+
-+ mt762x_wdt_dev.dev = &pdev->dev;
-+ mt762x_wdt_dev.bootstatus = mt762x_wdt_bootcause();
-+ mt762x_wdt_dev.max_timeout = (0xfffful / 1000);
-+ mt762x_wdt_dev.timeout = mt762x_wdt_dev.max_timeout;
-+
-+ watchdog_set_nowayout(&mt762x_wdt_dev, nowayout);
-+
-+ ret = watchdog_register_device(&mt762x_wdt_dev);
-+ if (!ret)
-+ dev_info(&pdev->dev, "Initialized\n");
-+
-+ return 0;
-+}
-+
-+static int mt762x_wdt_remove(struct platform_device *pdev)
-+{
-+ watchdog_unregister_device(&mt762x_wdt_dev);
-+
-+ return 0;
-+}
-+
-+static void mt762x_wdt_shutdown(struct platform_device *pdev)
-+{
-+ mt762x_wdt_stop(&mt762x_wdt_dev);
-+}
-+
-+static const struct of_device_id mt762x_wdt_match[] = {
-+ { .compatible = "mtk,mt7621-wdt" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mt762x_wdt_match);
-+
-+static struct platform_driver mt762x_wdt_driver = {
-+ .probe = mt762x_wdt_probe,
-+ .remove = mt762x_wdt_remove,
-+ .shutdown = mt762x_wdt_shutdown,
-+ .driver = {
-+ .name = KBUILD_MODNAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = mt762x_wdt_match,
-+ },
-+};
-+
-+module_platform_driver(mt762x_wdt_driver);
-+
-+MODULE_DESCRIPTION("MediaTek MT762x hardware watchdog driver");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch
deleted file mode 100644
index f6450367cf..0000000000
--- a/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:31:08 +0100
-Subject: [PATCH 51/53] serial: add ugly custom baud rate hack
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/serial_core.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -359,6 +359,9 @@ uart_get_baud_rate(struct uart_port *por
- break;
- }
-
-+ if (tty_termios_baud_rate(termios) == 2500000)
-+ return 250000;
-+
- for (try = 0; try < 2; try++) {
- baud = tty_termios_baud_rate(termios);
-
diff --git a/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch b/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch
deleted file mode 100644
index cb5d02494c..0000000000
--- a/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 7 Dec 2015 17:16:50 +0100
-Subject: [PATCH 52/53] pwm: add mediatek support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/pwm/Kconfig | 9 +++
- drivers/pwm/Makefile | 1 +
- drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 183 insertions(+)
- create mode 100644 drivers/pwm/pwm-mediatek.c
-
---- a/drivers/pwm/Kconfig
-+++ b/drivers/pwm/Kconfig
-@@ -230,6 +230,15 @@ config PWM_LPSS_PLATFORM
- To compile this driver as a module, choose M here: the module
- will be called pwm-lpss-platform.
-
-+config PWM_MEDIATEK
-+ tristate "Mediatek PWM support"
-+ depends on RALINK && OF
-+ help
-+ Generic PWM framework driver for Mediatek ARM SoC.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called pwm-mxs.
-+
- config PWM_MXS
- tristate "Freescale MXS PWM support"
- depends on ARCH_MXS && OF
---- a/drivers/pwm/Makefile
-+++ b/drivers/pwm/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx
- obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
- obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
- obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
-+obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
- obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
- obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
- obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
---- /dev/null
-+++ b/drivers/pwm/pwm-mediatek.c
-@@ -0,0 +1,173 @@
-+/*
-+ * Mediatek Pulse Width Modulator driver
-+ *
-+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pwm.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+
-+#define NUM_PWM 4
-+
-+/* PWM registers and bits definitions */
-+#define PWMCON 0x00
-+#define PWMHDUR 0x04
-+#define PWMLDUR 0x08
-+#define PWMGDUR 0x0c
-+#define PWMWAVENUM 0x28
-+#define PWMDWIDTH 0x2c
-+#define PWMTHRES 0x30
-+
-+/**
-+ * struct mtk_pwm_chip - struct representing pwm chip
-+ *
-+ * @mmio_base: base address of pwm chip
-+ * @chip: linux pwm chip representation
-+ */
-+struct mtk_pwm_chip {
-+ void __iomem *mmio_base;
-+ struct pwm_chip chip;
-+};
-+
-+static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
-+{
-+ return container_of(chip, struct mtk_pwm_chip, chip);
-+}
-+
-+static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
-+ unsigned long offset)
-+{
-+ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset);
-+}
-+
-+static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
-+ unsigned int num, unsigned long offset,
-+ unsigned long val)
-+{
-+ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset);
-+}
-+
-+static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-+ int duty_ns, int period_ns)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 resolution = 100 / 4;
-+ u32 clkdiv = 0;
-+
-+ while (period_ns / resolution > 8191) {
-+ clkdiv++;
-+ resolution *= 2;
-+ }
-+
-+ if (clkdiv > 7)
-+ return -1;
-+
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
-+ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
-+ return 0;
-+}
-+
-+static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 val;
-+
-+ val = ioread32(pc->mmio_base);
-+ val |= BIT(pwm->hwpwm);
-+ iowrite32(val, pc->mmio_base);
-+
-+ return 0;
-+}
-+
-+static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip);
-+ u32 val;
-+
-+ val = ioread32(pc->mmio_base);
-+ val &= ~BIT(pwm->hwpwm);
-+ iowrite32(val, pc->mmio_base);
-+}
-+
-+static const struct pwm_ops mtk_pwm_ops = {
-+ .config = mtk_pwm_config,
-+ .enable = mtk_pwm_enable,
-+ .disable = mtk_pwm_disable,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int mtk_pwm_probe(struct platform_device *pdev)
-+{
-+ struct mtk_pwm_chip *pc;
-+ struct resource *r;
-+ int ret;
-+
-+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
-+ if (!pc)
-+ return -ENOMEM;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
-+ if (IS_ERR(pc->mmio_base))
-+ return PTR_ERR(pc->mmio_base);
-+
-+ platform_set_drvdata(pdev, pc);
-+
-+ pc->chip.dev = &pdev->dev;
-+ pc->chip.ops = &mtk_pwm_ops;
-+ pc->chip.base = -1;
-+ pc->chip.npwm = NUM_PWM;
-+
-+ ret = pwmchip_add(&pc->chip);
-+ if (ret < 0)
-+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
-+
-+ return ret;
-+}
-+
-+static int mtk_pwm_remove(struct platform_device *pdev)
-+{
-+ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i = 0; i < NUM_PWM; i++)
-+ pwm_disable(&pc->chip.pwms[i]);
-+
-+ return pwmchip_remove(&pc->chip);
-+}
-+
-+static const struct of_device_id mtk_pwm_of_match[] = {
-+ { .compatible = "mediatek,mt7628-pwm" },
-+ { }
-+};
-+
-+MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
-+
-+static struct platform_driver mtk_pwm_driver = {
-+ .driver = {
-+ .name = "mtk-pwm",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mtk_pwm_of_match,
-+ },
-+ .probe = mtk_pwm_probe,
-+ .remove = mtk_pwm_remove,
-+};
-+
-+module_platform_driver(mtk_pwm_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_ALIAS("platform:mtk-pwm");
diff --git a/target/linux/ramips/patches-4.3/0054-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-4.3/0054-mtd-add-chunked-read-io-to-m25p80.patch
deleted file mode 100644
index c7a33d2c38..0000000000
--- a/target/linux/ramips/patches-4.3/0054-mtd-add-chunked-read-io-to-m25p80.patch
+++ /dev/null
@@ -1,123 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1008,6 +1008,66 @@ write_err:
- return ret;
- }
-
-+static int spi_nor_chunked_write(struct mtd_info *mtd, loff_t _to, size_t _len,
-+ size_t *_retlen, const u_char *_buf)
-+{
-+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
-+ int chunk_size;
-+ int retlen = 0;
-+ int ret;
-+
-+ chunk_size = nor->chunk_size;
-+ if (!chunk_size)
-+ chunk_size = _len;
-+
-+ if (nor->addr_width > 3)
-+ chunk_size -= nor->addr_width - 3;
-+
-+ while (retlen < _len) {
-+ size_t len = min_t(int, chunk_size, _len - retlen);
-+ const u_char *buf = _buf + retlen;
-+ loff_t to = _to + retlen;
-+
-+ if (nor->flags & SNOR_F_SST)
-+ ret = sst_write(mtd, to, len, &retlen, buf);
-+ else
-+ ret = spi_nor_write(mtd, to, len, &retlen, buf);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ *_retlen += retlen;
-+ return 0;
-+}
-+
-+static int spi_nor_chunked_read(struct mtd_info *mtd, loff_t _from, size_t _len,
-+ size_t *_retlen, u_char *_buf)
-+{
-+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
-+ int chunk_size;
-+ int ret;
-+
-+ chunk_size = nor->chunk_size;
-+ if (!chunk_size)
-+ chunk_size = _len;
-+
-+ *_retlen = 0;
-+ while (*_retlen < _len) {
-+ size_t len = min_t(int, chunk_size, _len - *_retlen);
-+ u_char *buf = _buf + *_retlen;
-+ loff_t from = _from + *_retlen;
-+ int retlen = 0;
-+
-+ ret = spi_nor_read(mtd, from, len, &retlen, buf);
-+ if (ret)
-+ return ret;
-+
-+ *_retlen += retlen;
-+ }
-+
-+ return 0;
-+}
-+
- static int macronix_quad_enable(struct spi_nor *nor)
- {
- int ret, val;
-@@ -1231,10 +1291,12 @@ int spi_nor_scan(struct spi_nor *nor, co
- }
-
- /* sst nor chips use AAI word program */
-- if (info->flags & SST_WRITE)
-+ if (info->flags & SST_WRITE) {
- mtd->_write = sst_write;
-- else
-+ nor->flags |= SNOR_F_SST;
-+ } else {
- mtd->_write = spi_nor_write;
-+ }
-
- if (info->flags & USE_FSR)
- nor->flags |= SNOR_F_USE_FSR;
-@@ -1262,11 +1324,20 @@ int spi_nor_scan(struct spi_nor *nor, co
- mtd->writebufsize = nor->page_size;
-
- if (np) {
-+ u32 val;
-+
- /* If we were instantiated by DT, use it */
- if (of_property_read_bool(np, "m25p,fast-read"))
- nor->flash_read = SPI_NOR_FAST;
- else
- nor->flash_read = SPI_NOR_NORMAL;
-+
-+ if (!of_property_read_u32(np, "m25p,chunked-io", &val)) {
-+ dev_info(dev, "using chunked io (size=%d)\n", val);
-+ mtd->_read = spi_nor_chunked_read;
-+ mtd->_write = spi_nor_chunked_write;
-+ nor->chunk_size = val;
-+ }
- } else {
- /* If we weren't instantiated by DT, default to fast-read */
- nor->flash_read = SPI_NOR_FAST;
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -116,6 +116,7 @@ enum spi_nor_ops {
-
- enum spi_nor_option_flags {
- SNOR_F_USE_FSR = BIT(0),
-+ SNOR_F_SST = BIT(1),
- };
-
- /**
-@@ -156,6 +157,7 @@ struct spi_nor {
- struct device *dev;
- struct device_node *flash_node;
- u32 page_size;
-+ u16 chunk_size;
- u8 addr_width;
- u8 erase_opcode;
- u8 read_opcode;
diff --git a/target/linux/ramips/patches-4.3/0055-MIPS-CPS-drop-.set-mips64r2-directives.patch b/target/linux/ramips/patches-4.3/0055-MIPS-CPS-drop-.set-mips64r2-directives.patch
deleted file mode 100644
index 049efb92e3..0000000000
--- a/target/linux/ramips/patches-4.3/0055-MIPS-CPS-drop-.set-mips64r2-directives.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From patchwork Wed Aug 5 22:42:40 2015
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [6/6] MIPS: CPS: drop .set mips64r2 directives
-From: Paul Burton <paul.burton@imgtec.com>
-X-Patchwork-Id: 10869
-Message-Id: <1438814560-19821-7-git-send-email-paul.burton@imgtec.com>
-To: <linux-mips@linux-mips.org>
-Cc: Paul Burton <paul.burton@imgtec.com>,
- Markos Chandras <markos.chandras@imgtec.com>,
- <stable@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
- James Hogan <james.hogan@imgtec.com>, "Ralf Baechle" <ralf@linux-mips.org>
-Date: Wed, 5 Aug 2015 15:42:40 -0700
-
-Commit 977e043d5ea1 ("MIPS: kernel: cps-vec: Replace mips32r2 ISA level
-with mips64r2") leads to .set mips64r2 directives being present in 32
-bit (ie. CONFIG_32BIT=y) kernels. This is incorrect & leads to MIPS64
-instructions being emitted by the assembler when expanding
-pseudo-instructions. For example the "move" instruction can legitimately
-be expanded to a "daddu". This causes problems when the kernel is run on
-a MIPS32 CPU, as CONFIG_32BIT kernels of course often are...
-
-Fix this by dropping the .set <ISA> directives entirely now that Kconfig
-should be ensuring that kernels including this code are built with a
-suitable -march= compiler flag.
-
-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
-Cc: Markos Chandras <markos.chandras@imgtec.com>
-Cc: <stable@vger.kernel.org> # 3.16+
----
-
- arch/mips/kernel/cps-vec.S | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/arch/mips/kernel/cps-vec.S
-+++ b/arch/mips/kernel/cps-vec.S
-@@ -229,7 +229,6 @@ LEAF(mips_cps_core_init)
- has_mt t0, 3f
-
- .set push
-- .set mips64r2
- .set mt
-
- /* Only allow 1 TC per VPE to execute... */
-@@ -348,7 +347,6 @@ LEAF(mips_cps_boot_vpes)
- nop
-
- .set push
-- .set mips64r2
- .set mt
-
- 1: /* Enter VPE configuration state */
diff --git a/target/linux/ramips/patches-4.3/0056-cm-intoruce-core-other-locking-functions.patch b/target/linux/ramips/patches-4.3/0056-cm-intoruce-core-other-locking-functions.patch
deleted file mode 100644
index e7c5a0b5aa..0000000000
--- a/target/linux/ramips/patches-4.3/0056-cm-intoruce-core-other-locking-functions.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-commit 23d5de8efb9aed48074a72bf3d43841e1556ca42
-Author: Paul Burton <paul.burton@imgtec.com>
-Date: Tue Sep 22 11:12:16 2015 -0700
-
- MIPS: CM: Introduce core-other locking functions
-
- Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the
- existing CPC equivalents, in order to lock access from the current core
- to another via the core-other GCR region. This hasn't been required in
- the past but with CM3 the CPC starts using GCR_CL_OTHER rather than
- CPC_CL_OTHER and this will be required for safety.
-
- [ralf@linux-mips.org: Fix merge conflict.]
-
- Signed-off-by: Paul Burton <paul.burton@imgtec.com>
- Cc: linux-mips@linux-mips.org
- Cc: linux-kernel@vger.kernel.org
- Cc: James Hogan <james.hogan@imgtec.com>
- Cc: Markos Chandras <markos.chandras@imgtec.com>
- Patchwork: https://patchwork.linux-mips.org/patch/11207/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/include/asm/mips-cm.h
-+++ b/arch/mips/include/asm/mips-cm.h
-@@ -334,6 +334,10 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
- /* GCR_Cx_OTHER register fields */
- #define CM_GCR_Cx_OTHER_CORENUM_SHF 16
- #define CM_GCR_Cx_OTHER_CORENUM_MSK (_ULCAST_(0xffff) << 16)
-+#define CM3_GCR_Cx_OTHER_CORE_SHF 8
-+#define CM3_GCR_Cx_OTHER_CORE_MSK (_ULCAST_(0x3f) << 8)
-+#define CM3_GCR_Cx_OTHER_VP_SHF 0
-+#define CM3_GCR_Cx_OTHER_VP_MSK (_ULCAST_(0x7) << 0)
-
- /* GCR_Cx_RESET_BASE register fields */
- #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF 12
-@@ -444,4 +448,32 @@ static inline unsigned int mips_cm_vp_id
- return (core * mips_cm_max_vp_width()) + vp;
- }
-
-+#ifdef CONFIG_MIPS_CM
-+
-+/**
-+ * mips_cm_lock_other - lock access to another core
-+ * @core: the other core to be accessed
-+ * @vp: the VP within the other core to be accessed
-+ *
-+ * Call before operating upon a core via the 'other' register region in
-+ * order to prevent the region being moved during access. Must be followed
-+ * by a call to mips_cm_unlock_other.
-+ */
-+extern void mips_cm_lock_other(unsigned int core, unsigned int vp);
-+
-+/**
-+ * mips_cm_unlock_other - unlock access to another core
-+ *
-+ * Call after operating upon another core via the 'other' register region.
-+ * Must be called after mips_cm_lock_other.
-+ */
-+extern void mips_cm_unlock_other(void);
-+
-+#else /* !CONFIG_MIPS_CM */
-+
-+static inline void mips_cm_lock_other(unsigned int core) { }
-+static inline void mips_cm_unlock_other(void) { }
-+
-+#endif /* !CONFIG_MIPS_CM */
-+
- #endif /* __MIPS_ASM_MIPS_CM_H__ */
---- a/arch/mips/kernel/mips-cm.c
-+++ b/arch/mips/kernel/mips-cm.c
-@@ -9,6 +9,8 @@
- */
-
- #include <linux/errno.h>
-+#include <linux/percpu.h>
-+#include <linux/spinlock.h>
-
- #include <asm/mips-cm.h>
- #include <asm/mipsregs.h>
-@@ -136,6 +138,9 @@ static char *cm3_causes[32] = {
- "0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f"
- };
-
-+static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock);
-+static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
-+
- phys_addr_t __mips_cm_phys_base(void)
- {
- u32 config3 = read_c0_config3();
-@@ -200,6 +205,7 @@ int mips_cm_probe(void)
- {
- phys_addr_t addr;
- u32 base_reg;
-+ unsigned cpu;
-
- /*
- * No need to probe again if we have already been
-@@ -247,9 +253,42 @@ int mips_cm_probe(void)
- /* determine register width for this CM */
- mips_cm_is64 = config_enabled(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3);
-
-+ for_each_possible_cpu(cpu)
-+ spin_lock_init(&per_cpu(cm_core_lock, cpu));
-+
- return 0;
- }
-
-+void mips_cm_lock_other(unsigned int core, unsigned int vp)
-+{
-+ unsigned curr_core;
-+ u32 val;
-+
-+ preempt_disable();
-+ curr_core = current_cpu_data.core;
-+ spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
-+ per_cpu(cm_core_lock_flags, curr_core));
-+
-+ if (mips_cm_revision() >= CM_REV_CM3) {
-+ val = core << CM3_GCR_Cx_OTHER_CORE_SHF;
-+ val |= vp << CM3_GCR_Cx_OTHER_VP_SHF;
-+ } else {
-+ BUG_ON(vp != 0);
-+ val = core << CM_GCR_Cx_OTHER_CORENUM_SHF;
-+ }
-+
-+ write_gcr_cl_other(val);
-+}
-+
-+void mips_cm_unlock_other(void)
-+{
-+ unsigned curr_core = current_cpu_data.core;
-+
-+ spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core),
-+ per_cpu(cm_core_lock_flags, curr_core));
-+ preempt_enable();
-+}
-+
- void mips_cm_error_report(void)
- {
- unsigned long revision = mips_cm_revision();
diff --git a/target/linux/ramips/patches-4.3/0057-cm-use-core-other-locking-function.patch b/target/linux/ramips/patches-4.3/0057-cm-use-core-other-locking-function.patch
deleted file mode 100644
index 2ac52f706a..0000000000
--- a/target/linux/ramips/patches-4.3/0057-cm-use-core-other-locking-function.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-commit 4ede31617056b7424eef28dce59dd6dbe81729c3
-Author: Paul Burton <paul.burton@imgtec.com>
-Date: Tue Sep 22 11:12:17 2015 -0700
-
- MIPS: CM: make use of mips_cm_{lock,unlock}_other
-
- Document that CPC core-other accesses must take place within the bounds
- of the CM lock, and begin using the CM lock functions where we access
- the GCRs of other cores. This is required because with CM3 the CPC began
- using GCR_CL_OTHER instead of CPC_CL_OTHER.
-
- Signed-off-by: Paul Burton <paul.burton@imgtec.com>
- Cc: linux-mips@linux-mips.org
- Cc: Rusty Russell <rusty@rustcorp.com.au>
- Cc: Andrew Bresticker <abrestic@chromium.org>
- Cc: Bjorn Helgaas <bhelgaas@google.com>
- Cc: linux-kernel@vger.kernel.org
- Cc: Niklas Cassel <niklas.cassel@axis.com>
- Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
- Cc: Markos Chandras <markos.chandras@imgtec.com>
- Patchwork: https://patchwork.linux-mips.org/patch/11208/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/include/asm/mips-cpc.h
-+++ b/arch/mips/include/asm/mips-cpc.h
-@@ -149,7 +149,8 @@ BUILD_CPC_Cx_RW(other, 0x10)
- * core: the other core to be accessed
- *
- * Call before operating upon a core via the 'other' register region in
-- * order to prevent the region being moved during access. Must be followed
-+ * order to prevent the region being moved during access. Must be called
-+ * within the bounds of a mips_cm_{lock,unlock}_other pair, and followed
- * by a call to mips_cpc_unlock_other.
- */
- extern void mips_cpc_lock_other(unsigned int core);
---- a/arch/mips/kernel/smp-cps.c
-+++ b/arch/mips/kernel/smp-cps.c
-@@ -37,8 +37,9 @@ static unsigned core_vpe_count(unsigned
- if (!config_enabled(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt)
- return 1;
-
-- write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
-+ mips_cm_lock_other(core, 0);
- cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE_MSK;
-+ mips_cm_unlock_other();
- return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1;
- }
-
-@@ -193,7 +194,7 @@ static void boot_core(unsigned core)
- u32 access;
-
- /* Select the appropriate core */
-- write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
-+ mips_cm_lock_other(core, 0);
-
- /* Set its reset vector */
- write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry));
-@@ -216,6 +217,8 @@ static void boot_core(unsigned core)
- write_gcr_co_reset_release(0);
- }
-
-+ mips_cm_unlock_other();
-+
- /* The core is now powered up */
- bitmap_set(core_power, core, 1);
- }
---- a/arch/mips/kernel/smp-gic.c
-+++ b/arch/mips/kernel/smp-gic.c
-@@ -46,9 +46,11 @@ void gic_send_ipi_single(int cpu, unsign
-
- if (mips_cpc_present() && (core != current_cpu_data.core)) {
- while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
-+ mips_cm_lock_other(core, 0);
- mips_cpc_lock_other(core);
- write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
- mips_cpc_unlock_other();
-+ mips_cm_unlock_other();
- }
- }
-
diff --git a/target/linux/ramips/patches-4.3/0058-backport-ensure-core-other-GCR-reflect-correct-core.patch b/target/linux/ramips/patches-4.3/0058-backport-ensure-core-other-GCR-reflect-correct-core.patch
deleted file mode 100644
index e8ed6abf7f..0000000000
--- a/target/linux/ramips/patches-4.3/0058-backport-ensure-core-other-GCR-reflect-correct-core.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-commit 78a54c4d8e5a7915a4ec2ba0eb461fae50590683
-Author: Paul Burton <paul.burton@imgtec.com>
-Date: Tue Sep 22 11:12:18 2015 -0700
-
- MIPS: CM, CPC: Ensure core-other GCRs reflect the correct core
-
- Ensure the update to which core the core-other GCR regions reflect has
- taken place before any core-other GCRs are accessed by placing a memory
- barrier (sync instruction) between the write to the core-other registers
- and any such GCR accesses.
-
- Signed-off-by: Paul Burton <paul.burton@imgtec.com>
- Cc: linux-mips@linux-mips.org
- Cc: Bjorn Helgaas <bhelgaas@google.com>
- Cc: linux-kernel@vger.kernel.org
- Cc: Markos Chandras <markos.chandras@imgtec.com>
- Patchwork: https://patchwork.linux-mips.org/patch/11209/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
---- a/arch/mips/kernel/mips-cm.c
-+++ b/arch/mips/kernel/mips-cm.c
-@@ -278,6 +278,12 @@ void mips_cm_lock_other(unsigned int cor
- }
-
- write_gcr_cl_other(val);
-+
-+ /*
-+ * Ensure the core-other region reflects the appropriate core &
-+ * VP before any accesses to it occur.
-+ */
-+ mb();
- }
-
- void mips_cm_unlock_other(void)
---- a/arch/mips/kernel/mips-cpc.c
-+++ b/arch/mips/kernel/mips-cpc.c
-@@ -76,6 +76,12 @@ void mips_cpc_lock_other(unsigned int co
- spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
- per_cpu(cpc_core_lock_flags, curr_core));
- write_cpc_cl_other(core << CPC_Cx_OTHER_CORENUM_SHF);
-+
-+ /*
-+ * Ensure the core-other region reflects the appropriate core &
-+ * VP before any accesses to it occur.
-+ */
-+ mb();
- }
-
- void mips_cpc_unlock_other(void)
diff --git a/target/linux/ramips/patches-4.3/0059-correct-CPC_BASE_MASK.patch b/target/linux/ramips/patches-4.3/0059-correct-CPC_BASE_MASK.patch
deleted file mode 100644
index b267137187..0000000000
--- a/target/linux/ramips/patches-4.3/0059-correct-CPC_BASE_MASK.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/mips/include/asm/mips-cm.h
-+++ b/arch/mips/include/asm/mips-cm.h
-@@ -270,8 +270,8 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
- #define CM_GCR_GIC_BASE_GICEN_MSK (_ULCAST_(0x1) << 0)
-
- /* GCR_CPC_BASE register fields */
--#define CM_GCR_CPC_BASE_CPCBASE_SHF 17
--#define CM_GCR_CPC_BASE_CPCBASE_MSK (_ULCAST_(0x7fff) << 17)
-+#define CM_GCR_CPC_BASE_CPCBASE_SHF 15
-+#define CM_GCR_CPC_BASE_CPCBASE_MSK (_ULCAST_(0x1ffff) << 15)
- #define CM_GCR_CPC_BASE_CPCEN_SHF 0
- #define CM_GCR_CPC_BASE_CPCEN_MSK (_ULCAST_(0x1) << 0)
-
diff --git a/target/linux/ramips/patches-4.3/0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch b/target/linux/ramips/patches-4.3/0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch
deleted file mode 100644
index 6b9e9e3bc0..0000000000
--- a/target/linux/ramips/patches-4.3/0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/mips/include/asm/mips-cm.h
-+++ b/arch/mips/include/asm/mips-cm.h
-@@ -225,8 +225,7 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
- #define CM_GCR_BASE_GCRBASE_MSK (_ULCAST_(0x1ffff) << 15)
- #define CM_GCR_BASE_CMDEFTGT_SHF 0
- #define CM_GCR_BASE_CMDEFTGT_MSK (_ULCAST_(0x3) << 0)
--#define CM_GCR_BASE_CMDEFTGT_DISABLED 0
--#define CM_GCR_BASE_CMDEFTGT_MEM 1
-+#define CM_GCR_BASE_CMDEFTGT_MEM 0
- #define CM_GCR_BASE_CMDEFTGT_IOCU0 2
- #define CM_GCR_BASE_CMDEFTGT_IOCU1 3
-
diff --git a/target/linux/ramips/patches-4.3/0064-add_clk_round_rate.patch b/target/linux/ramips/patches-4.3/0064-add_clk_round_rate.patch
deleted file mode 100644
index 86d98b087c..0000000000
--- a/target/linux/ramips/patches-4.3/0064-add_clk_round_rate.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/mips/ralink/clk.c
-+++ b/arch/mips/ralink/clk.c
-@@ -62,6 +62,12 @@ int clk_set_rate(struct clk *clk, unsign
- }
- EXPORT_SYMBOL_GPL(clk_set_rate);
-
-+long clk_round_rate(struct clk *clk, unsigned long rate)
-+{
-+ return -1;
-+}
-+EXPORT_SYMBOL_GPL(clk_round_rate);
-+
- void __init plat_time_init(void)
- {
- struct clk *clk;
diff --git a/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch b/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch
deleted file mode 100644
index 99a8f932e3..0000000000
--- a/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -104,31 +104,31 @@ static struct rt2880_pmx_group mt7620a_p
- };
-
- static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-- FUNC("sdcx d6", 3, 19, 1),
-+ FUNC("sdxc d6", 3, 19, 1),
- FUNC("utif", 2, 19, 1),
- FUNC("gpio", 1, 19, 1),
- FUNC("pwm1", 0, 19, 1),
- };
-
- static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
-- FUNC("sdcx d7", 3, 18, 1),
-+ FUNC("sdxc d7", 3, 18, 1),
- FUNC("utif", 2, 18, 1),
- FUNC("gpio", 1, 18, 1),
- FUNC("pwm0", 0, 18, 1),
- };
-
- static struct rt2880_pmx_func uart2_grp_mt7628[] = {
-- FUNC("sdcx d5 d4", 3, 20, 2),
-+ FUNC("sdxc d5 d4", 3, 20, 2),
- FUNC("pwm", 2, 20, 2),
- FUNC("gpio", 1, 20, 2),
-- FUNC("uart", 0, 20, 2),
-+ FUNC("uart2", 0, 20, 2),
- };
-
- static struct rt2880_pmx_func uart1_grp_mt7628[] = {
- FUNC("sw_r", 3, 45, 2),
- FUNC("pwm", 2, 45, 2),
- FUNC("gpio", 1, 45, 2),
-- FUNC("uart", 0, 45, 2),
-+ FUNC("uart1", 0, 45, 2),
- };
-
- static struct rt2880_pmx_func i2c_grp_mt7628[] = {
-@@ -140,21 +140,21 @@ static struct rt2880_pmx_func i2c_grp_mt
-
- static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
- static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
--static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
-+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
- static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
-
- static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
- FUNC("jtag", 3, 22, 8),
- FUNC("utif", 2, 22, 8),
- FUNC("gpio", 1, 22, 8),
-- FUNC("sdcx", 0, 22, 8),
-+ FUNC("sdxc", 0, 22, 8),
- };
-
- static struct rt2880_pmx_func uart0_grp_mt7628[] = {
- FUNC("-", 3, 12, 2),
- FUNC("-", 2, 12, 2),
- FUNC("gpio", 1, 12, 2),
-- FUNC("uart", 0, 12, 2),
-+ FUNC("uart0", 0, 12, 2),
- };
-
- static struct rt2880_pmx_func i2s_grp_mt7628[] = {
-@@ -449,6 +449,8 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000b40.spi", sys_rate);
- ralink_clk_add("10000c00.uartlite", periph_rate);
-+ ralink_clk_add("10000d00.uart1", periph_rate);
-+ ralink_clk_add("10000e00.uart2", periph_rate);
- ralink_clk_add("10180000.wmac", xtal_rate);
-
- if (IS_ENABLED(CONFIG_USB) &&
-@@ -571,13 +573,13 @@ void prom_soc_init(struct ralink_soc_inf
-
- cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
-
-- if (ralink_soc == MT762X_SOC_MT7628AN)
-+ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688)
- dram_type = ((cfg0&0x00000001) == 0x00000001)?SYSCFG0_DRAM_TYPE_DDR1_MT7628:SYSCFG0_DRAM_TYPE_DDR2_MT7628;
- else
- dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
-
- soc_info->mem_base = MT7620_DRAM_BASE;
-- if (ralink_soc == MT762X_SOC_MT7628AN)
-+ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688)
- mt7628_dram_init(soc_info);
- else
- mt7620_dram_init(soc_info);
diff --git a/target/linux/ramips/patches-4.3/0066-mt7621-enable-highmem.patch b/target/linux/ramips/patches-4.3/0066-mt7621-enable-highmem.patch
deleted file mode 100644
index 50f32da629..0000000000
--- a/target/linux/ramips/patches-4.3/0066-mt7621-enable-highmem.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -51,6 +51,7 @@ choice
- select SYS_SUPPORTS_MULTITHREADING
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_MIPS_CPS
-+ select SYS_SUPPORTS_HIGHMEM
- select MIPS_GIC
- select COMMON_CLK
- select CLKSRC_MIPS_GIC
diff --git a/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch
deleted file mode 100644
index b57019631d..0000000000
--- a/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -792,9 +792,6 @@ static void split_uimage(struct mtd_info
- return;
-
- len = be32_to_cpu(hdr.size) + 0x40;
-- len = mtd_pad_erasesize(master, part->offset, len);
-- if (len + master->erasesize > part->mtd.size)
-- return;
-
- if (config_enabled(CONFIG_MTD_SPLIT_UIMAGE_FW))
- pr_err("Dedicated partitioner didn't split firmware partition, please fill a bug report!\n");
diff --git a/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch
deleted file mode 100644
index 483c1619dd..0000000000
--- a/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -780,8 +780,11 @@ static void split_uimage(struct mtd_info
- {
- struct {
- __be32 magic;
-- __be32 pad[2];
-+ __be32 pad0[2];
- __be32 size;
-+ __be32 pad1[4];
-+ __be32 name[7];
-+ __be32 kern_size;
- } hdr;
- size_t len;
-
-@@ -791,7 +794,10 @@ static void split_uimage(struct mtd_info
- if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
- return;
-
-- len = be32_to_cpu(hdr.size) + 0x40;
-+ if (hdr.kern_size != 0 && hdr.name[0] == 0)
-+ len = be32_to_cpu(hdr.kern_size);
-+ else
-+ len = be32_to_cpu(hdr.size) + 0x40;
-
- if (config_enabled(CONFIG_MTD_SPLIT_UIMAGE_FW))
- pr_err("Dedicated partitioner didn't split firmware partition, please fill a bug report!\n");
diff --git a/target/linux/ramips/patches-4.3/0103-MIPS-OWRTDTB.patch b/target/linux/ramips/patches-4.3/0103-MIPS-OWRTDTB.patch
deleted file mode 100644
index b90138317b..0000000000
--- a/target/linux/ramips/patches-4.3/0103-MIPS-OWRTDTB.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From c174d2250e402399ad7dbdd57d51883d8804bba0 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 15 Jul 2013 00:40:37 +0200
-Subject: [PATCH 31/33] owrt: MIPS: add OWRTDTB secion
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/head.S | 3 +++
- arch/mips/ralink/Makefile | 2 +-
- arch/mips/ralink/of.c | 4 +++-
- 3 files changed, 7 insertions(+), 2 deletions(-)
-
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -86,6 +86,9 @@ EXPORT(__image_cmdline)
- .fill 0x400
- #endif /* CONFIG_IMAGE_CMDLINE_HACK */
-
-+ .ascii "OWRTDTB:"
-+ EXPORT(__image_dtb)
-+ .fill 0x4000
- __REF
-
- NESTED(kernel_entry, 16, sp) # kernel entry point
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -66,6 +66,8 @@ static int __init early_init_dt_find_mem
- return 0;
- }
-
-+extern struct boot_param_header __image_dtb;
-+
- void __init plat_mem_setup(void)
- {
- set_io_port_base(KSEG1);
-@@ -74,7 +76,7 @@ void __init plat_mem_setup(void)
- * Load the builtin devicetree. This causes the chosen node to be
- * parsed resulting in our memory appearing
- */
-- __dt_setup_arch(__dtb_start);
-+ __dt_setup_arch(&__image_dtb);
-
- strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
diff --git a/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch b/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch
deleted file mode 100644
index 5095d68df4..0000000000
--- a/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -3,7 +3,7 @@
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2008-2014 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
- */
-@@ -66,6 +66,17 @@ static int __init early_init_dt_find_mem
- return 0;
- }
-
-+static int chosen_dtb;
-+
-+static int __init early_init_dt_find_chosen(unsigned long node, const char *uname,
-+ int depth, void *data)
-+{
-+ if (depth == 1 && !strcmp(uname, "chosen"))
-+ chosen_dtb = 1;
-+
-+ return 0;
-+}
-+
- extern struct boot_param_header __image_dtb;
-
- void __init plat_mem_setup(void)
-@@ -78,7 +89,9 @@ void __init plat_mem_setup(void)
- */
- __dt_setup_arch(&__image_dtb);
-
-- strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-+ of_scan_flat_dt(early_init_dt_find_chosen, NULL);
-+ if (chosen_dtb)
-+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
- strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
diff --git a/target/linux/ramips/patches-4.3/0200-linkit_bootstrap.patch b/target/linux/ramips/patches-4.3/0200-linkit_bootstrap.patch
deleted file mode 100644
index 70e8170c44..0000000000
--- a/target/linux/ramips/patches-4.3/0200-linkit_bootstrap.patch
+++ /dev/null
@@ -1,94 +0,0 @@
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE) += genwqe/
- obj-$(CONFIG_ECHO) += echo/
- obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
- obj-$(CONFIG_CXL_BASE) += cxl/
-+obj-$(CONFIG_SOC_MT7620) += linkit.o
---- /dev/null
-+++ b/drivers/misc/linkit.c
-@@ -0,0 +1,84 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/gpio.h>
-+
-+#define LINKIT_LATCH_GPIO 11
-+
-+struct linkit_hw_data {
-+ char board[16];
-+ char rev[16];
-+};
-+
-+static void sanify_string(char *s)
-+{
-+ int i;
-+
-+ for (i = 0; i < 15; i++)
-+ if (s[i] <= 0x20)
-+ s[i] = '\0';
-+ s[15] = '\0';
-+}
-+
-+static int linkit_probe(struct platform_device *pdev)
-+{
-+ struct linkit_hw_data hw;
-+ struct mtd_info *mtd;
-+ size_t retlen;
-+ int ret;
-+
-+ mtd = get_mtd_device_nm("factory");
-+ if (IS_ERR(mtd))
-+ return PTR_ERR(mtd);
-+
-+ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw);
-+ put_mtd_device(mtd);
-+
-+ sanify_string(hw.board);
-+ sanify_string(hw.rev);
-+
-+ dev_info(&pdev->dev, "Version : %s\n", hw.board);
-+ dev_info(&pdev->dev, "Revision : %s\n", hw.rev);
-+
-+ if (!strcmp(hw.board, "LINKITS7688")) {
-+ dev_info(&pdev->dev, "setting up bootstrap latch\n");
-+
-+ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) {
-+ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n");
-+ return -1;
-+ }
-+ gpio_direction_output(LINKIT_LATCH_GPIO, 0);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id linkit_match[] = {
-+ { .compatible = "mediatek,linkit" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, linkit_match);
-+
-+static struct platform_driver linkit_driver = {
-+ .probe = linkit_probe,
-+ .driver = {
-+ .name = "mtk-linkit",
-+ .owner = THIS_MODULE,
-+ .of_match_table = linkit_match,
-+ },
-+};
-+
-+int __init linkit_init(void)
-+{
-+ return platform_driver_register(&linkit_driver);
-+}
-+late_initcall_sync(linkit_init);
diff --git a/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch b/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch
deleted file mode 100644
index 2c726f6732..0000000000
--- a/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 9c2487f148ee38807d86beaf12dc2b818a764a99 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 17 Nov 2015 00:20:07 +0100
-Subject: [PATCH 500/513] Documentation: DT: net: add docs for ralink/mediatek
- SoC ethernet binding
-
-Add three files. ralink,rt2880-net.txt descibes the actual frame engine
-and the other two describe the switch forntend bindings.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
-Cc: devicetree@vger.kernel.org
----
- .../bindings/net/mediatek,mt7620-gsw.txt | 26 +++++++++
- .../devicetree/bindings/net/ralink,rt2880-net.txt | 61 ++++++++++++++++++++
- .../devicetree/bindings/net/ralink,rt3050-esw.txt | 32 ++++++++++
- 3 files changed, 119 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
- create mode 100644 Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
- create mode 100644 Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
-@@ -0,0 +1,26 @@
-+Mediatek Gigabit Switch
-+=======================
-+
-+The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
-+
-+Required properties:
-+- compatible: Should be "mediatek,mt7620-gsw"
-+- reg: Address and length of the register set for the device
-+- interrupt-parent: Should be the phandle for the interrupt controller
-+ that services interrupts for this device
-+- interrupts: Should contain the gigabit switches interrupt
-+- resets: Should contain the gigabit switches resets
-+- reset-names: Should contain the reset names "gsw"
-+
-+Example:
-+
-+gsw@10110000 {
-+ compatible = "ralink,mt7620-gsw";
-+ reg = <0x10110000 8000>;
-+
-+ resets = <&rstctrl 23>;
-+ reset-names = "gsw";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <17>;
-+};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
-@@ -0,0 +1,61 @@
-+Ralink Frame Engine Ethernet controller
-+=======================================
-+
-+The Ralink frame engine ethernet controller can be found on Ralink and
-+Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
-+
-+Depending on the SoC, there is a number of ports connected to the CPU port
-+directly and/or via a (gigabit-)switch.
-+
-+* Ethernet controller node
-+
-+Required properties:
-+- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
-+ "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
-+ "mediatek,mt7620-eth", "mediatek,mt7621-eth"
-+- reg: Address and length of the register set for the device
-+- interrupt-parent: Should be the phandle for the interrupt controller
-+ that services interrupts for this device
-+- interrupts: Should contain the frame engines interrupt
-+- resets: Should contain the frame engines resets
-+- reset-names: Should contain the reset names "fe". If a switch is present
-+ "esw" is also required.
-+
-+
-+* Ethernet port node
-+
-+Required properties:
-+- compatible: Should be "ralink,eth-port"
-+- reg: The number of the physical port
-+- phy-handle: reference to the node describing the phy
-+
-+Example:
-+
-+mdio-bus {
-+ ...
-+ phy0: ethernet-phy@0 {
-+ phy-mode = "mii";
-+ reg = <0>;
-+ };
-+};
-+
-+ethernet@400000 {
-+ compatible = "ralink,rt2880-eth";
-+ reg = <0x00400000 10000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ resets = <&rstctrl 18>;
-+ reset-names = "fe";
-+
-+ interrupt-parent = <&cpuintc>;
-+ interrupts = <5>;
-+
-+ port@0 {
-+ compatible = "ralink,eth-port";
-+ reg = <0>;
-+ phy-handle = <&phy0>;
-+ };
-+
-+};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
-@@ -0,0 +1,32 @@
-+Ralink Fast Ethernet Embedded Switch
-+====================================
-+
-+The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
-+SoCs (RT3x5x, rt5350, mt76x8).
-+
-+Required properties:
-+- compatible: Should be "ralink,rt3050-esw"
-+- reg: Address and length of the register set for the device
-+- interrupt-parent: Should be the phandle for the interrupt controller
-+ that services interrupts for this device
-+- interrupts: Should contain the embedded switches interrupt
-+- resets: Should contain the embedded switches resets
-+- reset-names: Should contain the reset names "esw"
-+
-+Optional properties:
-+- ralink,portmap: can be used to choose if the default switch setup is
-+ llllw or wllll
-+- ralink,led_polarity: override the active high/low settings of the leds
-+
-+Example:
-+
-+esw@10110000 {
-+ compatible = "ralink,rt3050-esw";
-+ reg = <0x10110000 8000>;
-+
-+ resets = <&rstctrl 23>;
-+ reset-names = "esw";
-+
-+ interrupt-parent = <&intc>;
-+ interrupts = <17>;
-+};
diff --git a/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch b/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch
deleted file mode 100644
index e94c1fab05..0000000000
--- a/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch
+++ /dev/null
@@ -1,2735 +0,0 @@
-From 2abe91b53ca4d2528ef1fc9c44c6e69f8c805776 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 18 Nov 2015 03:12:19 +0100
-Subject: [PATCH 501/513] net-next: mediatek: add the drivers core files
-
-This patch adds the main chunk of the driver. The ethernet core is used in all
-of the Mediatek/Ralink Wireless SoCs. Over the years we have seen verious
-changes to
-
-* the register layout
-* the type of ports (single/dual gbit, internal FE/Gbit switch)
-* dma engine
-
-and new offloading features were added, such as
-
-* checksum
-* vlan tx/rx
-* gso
-* lro
-
-However the core functionality has remained the sama allowing us to use the
-same core for all SoCs.
-
-The abstraction for the various SoCs uses the typical ops struct pattern which
-allows us to extend or override the cores functionality depending on which SoC
-we are on. The code to bring up the switches and external ports has also been
-split into separate files.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
----
- drivers/net/ethernet/mediatek/ethtool.c | 235 ++++
- drivers/net/ethernet/mediatek/ethtool.h | 22 +
- drivers/net/ethernet/mediatek/mdio.c | 258 +++++
- drivers/net/ethernet/mediatek/mdio.h | 27 +
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1607 +++++++++++++++++++++++++++
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 522 +++++++++
- 6 files changed, 2671 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/ethtool.c
- create mode 100644 drivers/net/ethernet/mediatek/ethtool.h
- create mode 100644 drivers/net/ethernet/mediatek/mdio.c
- create mode 100644 drivers/net/ethernet/mediatek/mdio.h
- create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_soc.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_soc.h
-
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/ethtool.c
-@@ -0,0 +1,235 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include "mtk_eth_soc.h"
-+
-+static const char fe_gdma_str[][ETH_GSTRING_LEN] = {
-+#define _FE(x...) # x,
-+FE_STAT_REG_DECLARE
-+#undef _FE
-+};
-+
-+static int fe_get_settings(struct net_device *dev,
-+ struct ethtool_cmd *cmd)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ int err;
-+
-+ if (!priv->phy_dev)
-+ goto out_gset;
-+
-+ if (priv->phy_flags == FE_PHY_FLAG_ATTACH) {
-+ err = phy_read_status(priv->phy_dev);
-+ if (err)
-+ goto out_gset;
-+ }
-+
-+ return phy_ethtool_gset(priv->phy_dev, cmd);
-+
-+out_gset:
-+ return -ENODEV;
-+}
-+
-+static int fe_set_settings(struct net_device *dev,
-+ struct ethtool_cmd *cmd)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ if (!priv->phy_dev)
-+ goto out_sset;
-+
-+ if (cmd->phy_address != priv->phy_dev->addr) {
-+ if (priv->phy->phy_node[cmd->phy_address]) {
-+ priv->phy_dev = priv->phy->phy[cmd->phy_address];
-+ priv->phy_flags = FE_PHY_FLAG_PORT;
-+ } else if (priv->mii_bus &&
-+ priv->mii_bus->phy_map[cmd->phy_address]) {
-+ priv->phy_dev =
-+ priv->mii_bus->phy_map[cmd->phy_address];
-+ priv->phy_flags = FE_PHY_FLAG_ATTACH;
-+ } else {
-+ goto out_sset;
-+ }
-+ }
-+
-+ return phy_ethtool_sset(priv->phy_dev, cmd);
-+
-+out_sset:
-+ return -ENODEV;
-+}
-+
-+static void fe_get_drvinfo(struct net_device *dev,
-+ struct ethtool_drvinfo *info)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct fe_soc_data *soc = priv->soc;
-+
-+ strlcpy(info->driver, priv->device->driver->name, sizeof(info->driver));
-+ strlcpy(info->version, MTK_FE_DRV_VERSION, sizeof(info->version));
-+ strlcpy(info->bus_info, dev_name(priv->device), sizeof(info->bus_info));
-+
-+ if (soc->reg_table[FE_REG_FE_COUNTER_BASE])
-+ info->n_stats = ARRAY_SIZE(fe_gdma_str);
-+}
-+
-+static u32 fe_get_msglevel(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ return priv->msg_enable;
-+}
-+
-+static void fe_set_msglevel(struct net_device *dev, u32 value)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ priv->msg_enable = value;
-+}
-+
-+static int fe_nway_reset(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ if (!priv->phy_dev)
-+ goto out_nway_reset;
-+
-+ return genphy_restart_aneg(priv->phy_dev);
-+
-+out_nway_reset:
-+ return -EOPNOTSUPP;
-+}
-+
-+static u32 fe_get_link(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ int err;
-+
-+ if (!priv->phy_dev)
-+ goto out_get_link;
-+
-+ if (priv->phy_flags == FE_PHY_FLAG_ATTACH) {
-+ err = genphy_update_link(priv->phy_dev);
-+ if (err)
-+ goto out_get_link;
-+ }
-+
-+ return priv->phy_dev->link;
-+
-+out_get_link:
-+ return ethtool_op_get_link(dev);
-+}
-+
-+static int fe_set_ringparam(struct net_device *dev,
-+ struct ethtool_ringparam *ring)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ if ((ring->tx_pending < 2) ||
-+ (ring->rx_pending < 2) ||
-+ (ring->rx_pending > MAX_DMA_DESC) ||
-+ (ring->tx_pending > MAX_DMA_DESC))
-+ return -EINVAL;
-+
-+ dev->netdev_ops->ndo_stop(dev);
-+
-+ priv->tx_ring.tx_ring_size = BIT(fls(ring->tx_pending) - 1);
-+ priv->rx_ring.rx_ring_size = BIT(fls(ring->rx_pending) - 1);
-+
-+ dev->netdev_ops->ndo_open(dev);
-+
-+ return 0;
-+}
-+
-+static void fe_get_ringparam(struct net_device *dev,
-+ struct ethtool_ringparam *ring)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ ring->rx_max_pending = MAX_DMA_DESC;
-+ ring->tx_max_pending = MAX_DMA_DESC;
-+ ring->rx_pending = priv->rx_ring.rx_ring_size;
-+ ring->tx_pending = priv->tx_ring.tx_ring_size;
-+}
-+
-+static void fe_get_strings(struct net_device *dev, u32 stringset, u8 *data)
-+{
-+ switch (stringset) {
-+ case ETH_SS_STATS:
-+ memcpy(data, *fe_gdma_str, sizeof(fe_gdma_str));
-+ break;
-+ }
-+}
-+
-+static int fe_get_sset_count(struct net_device *dev, int sset)
-+{
-+ switch (sset) {
-+ case ETH_SS_STATS:
-+ return ARRAY_SIZE(fe_gdma_str);
-+ default:
-+ return -EOPNOTSUPP;
-+ }
-+}
-+
-+static void fe_get_ethtool_stats(struct net_device *dev,
-+ struct ethtool_stats *stats, u64 *data)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct fe_hw_stats *hwstats = priv->hw_stats;
-+ u64 *data_src, *data_dst;
-+ unsigned int start;
-+ int i;
-+
-+ if (netif_running(dev) && netif_device_present(dev)) {
-+ if (spin_trylock(&hwstats->stats_lock)) {
-+ fe_stats_update(priv);
-+ spin_unlock(&hwstats->stats_lock);
-+ }
-+ }
-+
-+ do {
-+ data_src = &hwstats->tx_bytes;
-+ data_dst = data;
-+ start = u64_stats_fetch_begin_irq(&hwstats->syncp);
-+
-+ for (i = 0; i < ARRAY_SIZE(fe_gdma_str); i++)
-+ *data_dst++ = *data_src++;
-+
-+ } while (u64_stats_fetch_retry_irq(&hwstats->syncp, start));
-+}
-+
-+static struct ethtool_ops fe_ethtool_ops = {
-+ .get_settings = fe_get_settings,
-+ .set_settings = fe_set_settings,
-+ .get_drvinfo = fe_get_drvinfo,
-+ .get_msglevel = fe_get_msglevel,
-+ .set_msglevel = fe_set_msglevel,
-+ .nway_reset = fe_nway_reset,
-+ .get_link = fe_get_link,
-+ .set_ringparam = fe_set_ringparam,
-+ .get_ringparam = fe_get_ringparam,
-+};
-+
-+void fe_set_ethtool_ops(struct net_device *netdev)
-+{
-+ struct fe_priv *priv = netdev_priv(netdev);
-+ struct fe_soc_data *soc = priv->soc;
-+
-+ if (soc->reg_table[FE_REG_FE_COUNTER_BASE]) {
-+ fe_ethtool_ops.get_strings = fe_get_strings;
-+ fe_ethtool_ops.get_sset_count = fe_get_sset_count;
-+ fe_ethtool_ops.get_ethtool_stats = fe_get_ethtool_stats;
-+ }
-+
-+ netdev->ethtool_ops = &fe_ethtool_ops;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/ethtool.h
-@@ -0,0 +1,22 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#ifndef FE_ETHTOOL_H
-+#define FE_ETHTOOL_H
-+
-+#include <linux/ethtool.h>
-+
-+void fe_set_ethtool_ops(struct net_device *netdev);
-+
-+#endif /* FE_ETHTOOL_H */
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mdio.c
-@@ -0,0 +1,258 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/phy.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "mdio.h"
-+
-+static int fe_mdio_reset(struct mii_bus *bus)
-+{
-+ /* TODO */
-+ return 0;
-+}
-+
-+static void fe_phy_link_adjust(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&priv->phy->lock, flags);
-+ for (i = 0; i < 8; i++) {
-+ if (priv->phy->phy_node[i]) {
-+ struct phy_device *phydev = priv->phy->phy[i];
-+ int status_change = 0;
-+
-+ if (phydev->link)
-+ if (priv->phy->duplex[i] != phydev->duplex ||
-+ priv->phy->speed[i] != phydev->speed)
-+ status_change = 1;
-+
-+ if (phydev->link != priv->link[i])
-+ status_change = 1;
-+
-+ switch (phydev->speed) {
-+ case SPEED_1000:
-+ case SPEED_100:
-+ case SPEED_10:
-+ priv->link[i] = phydev->link;
-+ priv->phy->duplex[i] = phydev->duplex;
-+ priv->phy->speed[i] = phydev->speed;
-+
-+ if (status_change &&
-+ priv->soc->mdio_adjust_link)
-+ priv->soc->mdio_adjust_link(priv, i);
-+ break;
-+ }
-+ }
-+ }
-+}
-+
-+int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node)
-+{
-+ const __be32 *_port = NULL;
-+ struct phy_device *phydev;
-+ int phy_mode, port;
-+
-+ _port = of_get_property(phy_node, "reg", NULL);
-+
-+ if (!_port || (be32_to_cpu(*_port) >= 0x20)) {
-+ pr_err("%s: invalid port id\n", phy_node->name);
-+ return -EINVAL;
-+ }
-+ port = be32_to_cpu(*_port);
-+ phy_mode = of_get_phy_mode(phy_node);
-+ if (phy_mode < 0) {
-+ dev_err(priv->device, "incorrect phy-mode %d\n", phy_mode);
-+ priv->phy->phy_node[port] = NULL;
-+ return -EINVAL;
-+ }
-+
-+ phydev = of_phy_connect(priv->netdev, phy_node, fe_phy_link_adjust,
-+ 0, phy_mode);
-+ if (IS_ERR(phydev)) {
-+ dev_err(priv->device, "could not connect to PHY\n");
-+ priv->phy->phy_node[port] = NULL;
-+ return PTR_ERR(phydev);
-+ }
-+
-+ phydev->supported &= PHY_GBIT_FEATURES;
-+ phydev->advertising = phydev->supported;
-+
-+ dev_info(priv->device,
-+ "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
-+ port, dev_name(&phydev->dev), phydev->phy_id,
-+ phydev->drv->name);
-+
-+ priv->phy->phy[port] = phydev;
-+ priv->link[port] = 0;
-+
-+ return 0;
-+}
-+
-+static void phy_init(struct fe_priv *priv, struct phy_device *phy)
-+{
-+ phy_attach(priv->netdev, dev_name(&phy->dev), PHY_INTERFACE_MODE_MII);
-+
-+ phy->autoneg = AUTONEG_ENABLE;
-+ phy->speed = 0;
-+ phy->duplex = 0;
-+ phy->supported &= PHY_BASIC_FEATURES;
-+ phy->advertising = phy->supported | ADVERTISED_Autoneg;
-+
-+ phy_start_aneg(phy);
-+}
-+
-+static int fe_phy_connect(struct fe_priv *priv)
-+{
-+ int i;
-+
-+ for (i = 0; i < 8; i++) {
-+ if (priv->phy->phy_node[i]) {
-+ if (!priv->phy_dev) {
-+ priv->phy_dev = priv->phy->phy[i];
-+ priv->phy_flags = FE_PHY_FLAG_PORT;
-+ }
-+ } else if (priv->mii_bus && priv->mii_bus->phy_map[i]) {
-+ phy_init(priv, priv->mii_bus->phy_map[i]);
-+ if (!priv->phy_dev) {
-+ priv->phy_dev = priv->mii_bus->phy_map[i];
-+ priv->phy_flags = FE_PHY_FLAG_ATTACH;
-+ }
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static void fe_phy_disconnect(struct fe_priv *priv)
-+{
-+ unsigned long flags;
-+ int i;
-+
-+ for (i = 0; i < 8; i++)
-+ if (priv->phy->phy_fixed[i]) {
-+ spin_lock_irqsave(&priv->phy->lock, flags);
-+ priv->link[i] = 0;
-+ if (priv->soc->mdio_adjust_link)
-+ priv->soc->mdio_adjust_link(priv, i);
-+ spin_unlock_irqrestore(&priv->phy->lock, flags);
-+ } else if (priv->phy->phy[i]) {
-+ phy_disconnect(priv->phy->phy[i]);
-+ } else if (priv->mii_bus && priv->mii_bus->phy_map[i]) {
-+ phy_detach(priv->mii_bus->phy_map[i]);
-+ }
-+}
-+
-+static void fe_phy_start(struct fe_priv *priv)
-+{
-+ unsigned long flags;
-+ int i;
-+
-+ for (i = 0; i < 8; i++) {
-+ if (priv->phy->phy_fixed[i]) {
-+ spin_lock_irqsave(&priv->phy->lock, flags);
-+ priv->link[i] = 1;
-+ if (priv->soc->mdio_adjust_link)
-+ priv->soc->mdio_adjust_link(priv, i);
-+ spin_unlock_irqrestore(&priv->phy->lock, flags);
-+ } else if (priv->phy->phy[i]) {
-+ phy_start(priv->phy->phy[i]);
-+ }
-+ }
-+}
-+
-+static void fe_phy_stop(struct fe_priv *priv)
-+{
-+ unsigned long flags;
-+ int i;
-+
-+ for (i = 0; i < 8; i++)
-+ if (priv->phy->phy_fixed[i]) {
-+ spin_lock_irqsave(&priv->phy->lock, flags);
-+ priv->link[i] = 0;
-+ if (priv->soc->mdio_adjust_link)
-+ priv->soc->mdio_adjust_link(priv, i);
-+ spin_unlock_irqrestore(&priv->phy->lock, flags);
-+ } else if (priv->phy->phy[i]) {
-+ phy_stop(priv->phy->phy[i]);
-+ }
-+}
-+
-+static struct fe_phy phy_ralink = {
-+ .connect = fe_phy_connect,
-+ .disconnect = fe_phy_disconnect,
-+ .start = fe_phy_start,
-+ .stop = fe_phy_stop,
-+};
-+
-+int fe_mdio_init(struct fe_priv *priv)
-+{
-+ struct device_node *mii_np;
-+ int err;
-+
-+ if (!priv->soc->mdio_read || !priv->soc->mdio_write)
-+ return 0;
-+
-+ spin_lock_init(&phy_ralink.lock);
-+ priv->phy = &phy_ralink;
-+
-+ mii_np = of_get_child_by_name(priv->device->of_node, "mdio-bus");
-+ if (!mii_np) {
-+ dev_err(priv->device, "no %s child node found", "mdio-bus");
-+ return -ENODEV;
-+ }
-+
-+ if (!of_device_is_available(mii_np)) {
-+ err = 0;
-+ goto err_put_node;
-+ }
-+
-+ priv->mii_bus = mdiobus_alloc();
-+ if (!priv->mii_bus) {
-+ err = -ENOMEM;
-+ goto err_put_node;
-+ }
-+
-+ priv->mii_bus->name = "mdio";
-+ priv->mii_bus->read = priv->soc->mdio_read;
-+ priv->mii_bus->write = priv->soc->mdio_write;
-+ priv->mii_bus->reset = fe_mdio_reset;
-+ priv->mii_bus->priv = priv;
-+ priv->mii_bus->parent = priv->device;
-+
-+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name);
-+ err = of_mdiobus_register(priv->mii_bus, mii_np);
-+ if (err)
-+ goto err_free_bus;
-+
-+ return 0;
-+
-+err_free_bus:
-+ kfree(priv->mii_bus);
-+err_put_node:
-+ of_node_put(mii_np);
-+ priv->mii_bus = NULL;
-+ return err;
-+}
-+
-+void fe_mdio_cleanup(struct fe_priv *priv)
-+{
-+ if (!priv->mii_bus)
-+ return;
-+
-+ mdiobus_unregister(priv->mii_bus);
-+ of_node_put(priv->mii_bus->dev.of_node);
-+ kfree(priv->mii_bus);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mdio.h
-@@ -0,0 +1,27 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#ifndef _RALINK_MDIO_H__
-+#define _RALINK_MDIO_H__
-+
-+#ifdef CONFIG_NET_MEDIATEK_MDIO
-+int fe_mdio_init(struct fe_priv *priv);
-+void fe_mdio_cleanup(struct fe_priv *priv);
-+int fe_connect_phy_node(struct fe_priv *priv,
-+ struct device_node *phy_node);
-+#else
-+static inline int fe_mdio_init(struct fe_priv *priv) { return 0; }
-+static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
-+#endif
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -0,0 +1,1607 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+#include <linux/if_vlan.h>
-+#include <linux/reset.h>
-+#include <linux/tcp.h>
-+#include <linux/io.h>
-+#include <linux/bug.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "mdio.h"
-+#include "ethtool.h"
-+
-+#define MAX_RX_LENGTH 1536
-+#define FE_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
-+#define FE_RX_HLEN (NET_SKB_PAD + FE_RX_ETH_HLEN + NET_IP_ALIGN)
-+#define DMA_DUMMY_DESC 0xffffffff
-+#define FE_DEFAULT_MSG_ENABLE \
-+ (NETIF_MSG_DRV | \
-+ NETIF_MSG_PROBE | \
-+ NETIF_MSG_LINK | \
-+ NETIF_MSG_TIMER | \
-+ NETIF_MSG_IFDOWN | \
-+ NETIF_MSG_IFUP | \
-+ NETIF_MSG_RX_ERR | \
-+ NETIF_MSG_TX_ERR)
-+
-+#define TX_DMA_DESP2_DEF (TX_DMA_LS0 | TX_DMA_DONE)
-+#define TX_DMA_DESP4_DEF (TX_DMA_QN(3) | TX_DMA_PN(1))
-+#define NEXT_TX_DESP_IDX(X) (((X) + 1) & (ring->tx_ring_size - 1))
-+#define NEXT_RX_DESP_IDX(X) (((X) + 1) & (ring->rx_ring_size - 1))
-+
-+#define SYSC_REG_RSTCTRL 0x34
-+
-+static int fe_msg_level = -1;
-+module_param_named(msg_level, fe_msg_level, int, 0);
-+MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
-+
-+static const u16 fe_reg_table_default[FE_REG_COUNT] = {
-+ [FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG,
-+ [FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG,
-+ [FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG,
-+ [FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0,
-+ [FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0,
-+ [FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0,
-+ [FE_REG_TX_DTX_IDX0] = FE_TX_DTX_IDX0,
-+ [FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0,
-+ [FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0,
-+ [FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0,
-+ [FE_REG_RX_DRX_IDX0] = FE_RX_DRX_IDX0,
-+ [FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE,
-+ [FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS,
-+ [FE_REG_FE_DMA_VID_BASE] = FE_DMA_VID0,
-+ [FE_REG_FE_COUNTER_BASE] = FE_GDMA1_TX_GBCNT,
-+ [FE_REG_FE_RST_GL] = FE_FE_RST_GL,
-+};
-+
-+static const u16 *fe_reg_table = fe_reg_table_default;
-+
-+struct fe_work_t {
-+ int bitnr;
-+ void (*action)(struct fe_priv *);
-+};
-+
-+static void __iomem *fe_base;
-+
-+void fe_w32(u32 val, unsigned reg)
-+{
-+ __raw_writel(val, fe_base + reg);
-+}
-+
-+u32 fe_r32(unsigned reg)
-+{
-+ return __raw_readl(fe_base + reg);
-+}
-+
-+void fe_reg_w32(u32 val, enum fe_reg reg)
-+{
-+ fe_w32(val, fe_reg_table[reg]);
-+}
-+
-+u32 fe_reg_r32(enum fe_reg reg)
-+{
-+ return fe_r32(fe_reg_table[reg]);
-+}
-+
-+void fe_reset(u32 reset_bits)
-+{
-+ u32 t;
-+
-+ t = rt_sysc_r32(SYSC_REG_RSTCTRL);
-+ t |= reset_bits;
-+ rt_sysc_w32(t, SYSC_REG_RSTCTRL);
-+ usleep_range(10, 20);
-+
-+ t &= ~reset_bits;
-+ rt_sysc_w32(t, SYSC_REG_RSTCTRL);
-+ usleep_range(10, 20);
-+}
-+
-+static inline void fe_int_disable(u32 mask)
-+{
-+ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) & ~mask,
-+ FE_REG_FE_INT_ENABLE);
-+ /* flush write */
-+ fe_reg_r32(FE_REG_FE_INT_ENABLE);
-+}
-+
-+static inline void fe_int_enable(u32 mask)
-+{
-+ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) | mask,
-+ FE_REG_FE_INT_ENABLE);
-+ /* flush write */
-+ fe_reg_r32(FE_REG_FE_INT_ENABLE);
-+}
-+
-+static inline void fe_hw_set_macaddr(struct fe_priv *priv, unsigned char *mac)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ fe_w32((mac[0] << 8) | mac[1], FE_GDMA1_MAC_ADRH);
-+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+ FE_GDMA1_MAC_ADRL);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+}
-+
-+static int fe_set_mac_address(struct net_device *dev, void *p)
-+{
-+ int ret = eth_mac_addr(dev, p);
-+
-+ if (!ret) {
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ if (priv->soc->set_mac)
-+ priv->soc->set_mac(priv, dev->dev_addr);
-+ else
-+ fe_hw_set_macaddr(priv, p);
-+ }
-+
-+ return ret;
-+}
-+
-+static inline int fe_max_frag_size(int mtu)
-+{
-+ /* make sure buf_size will be at least MAX_RX_LENGTH */
-+ if (mtu + FE_RX_ETH_HLEN < MAX_RX_LENGTH)
-+ mtu = MAX_RX_LENGTH - FE_RX_ETH_HLEN;
-+
-+ return SKB_DATA_ALIGN(FE_RX_HLEN + mtu) +
-+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-+}
-+
-+static inline int fe_max_buf_size(int frag_size)
-+{
-+ int buf_size = frag_size - NET_SKB_PAD - NET_IP_ALIGN -
-+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-+
-+ BUG_ON(buf_size < MAX_RX_LENGTH);
-+ return buf_size;
-+}
-+
-+static inline void fe_get_rxd(struct fe_rx_dma *rxd, struct fe_rx_dma *dma_rxd)
-+{
-+ rxd->rxd1 = dma_rxd->rxd1;
-+ rxd->rxd2 = dma_rxd->rxd2;
-+ rxd->rxd3 = dma_rxd->rxd3;
-+ rxd->rxd4 = dma_rxd->rxd4;
-+}
-+
-+static inline void fe_set_txd(struct fe_tx_dma *txd, struct fe_tx_dma *dma_txd)
-+{
-+ dma_txd->txd1 = txd->txd1;
-+ dma_txd->txd3 = txd->txd3;
-+ dma_txd->txd4 = txd->txd4;
-+ /* clean dma done flag last */
-+ dma_txd->txd2 = txd->txd2;
-+}
-+
-+static void fe_clean_rx(struct fe_priv *priv)
-+{
-+ int i;
-+ struct fe_rx_ring *ring = &priv->rx_ring;
-+
-+ if (ring->rx_data) {
-+ for (i = 0; i < ring->rx_ring_size; i++)
-+ if (ring->rx_data[i]) {
-+ if (ring->rx_dma && ring->rx_dma[i].rxd1)
-+ dma_unmap_single(&priv->netdev->dev,
-+ ring->rx_dma[i].rxd1,
-+ ring->rx_buf_size,
-+ DMA_FROM_DEVICE);
-+ put_page(virt_to_head_page(ring->rx_data[i]));
-+ }
-+
-+ kfree(ring->rx_data);
-+ ring->rx_data = NULL;
-+ }
-+
-+ if (ring->rx_dma) {
-+ dma_free_coherent(&priv->netdev->dev,
-+ ring->rx_ring_size * sizeof(*ring->rx_dma),
-+ ring->rx_dma,
-+ ring->rx_phys);
-+ ring->rx_dma = NULL;
-+ }
-+}
-+
-+static int fe_alloc_rx(struct fe_priv *priv)
-+{
-+ struct net_device *netdev = priv->netdev;
-+ struct fe_rx_ring *ring = &priv->rx_ring;
-+ int i, pad;
-+
-+ ring->rx_data = kcalloc(ring->rx_ring_size, sizeof(*ring->rx_data),
-+ GFP_KERNEL);
-+ if (!ring->rx_data)
-+ goto no_rx_mem;
-+
-+ for (i = 0; i < ring->rx_ring_size; i++) {
-+ ring->rx_data[i] = netdev_alloc_frag(ring->frag_size);
-+ if (!ring->rx_data[i])
-+ goto no_rx_mem;
-+ }
-+
-+ ring->rx_dma = dma_alloc_coherent(&netdev->dev,
-+ ring->rx_ring_size * sizeof(*ring->rx_dma),
-+ &ring->rx_phys,
-+ GFP_ATOMIC | __GFP_ZERO);
-+ if (!ring->rx_dma)
-+ goto no_rx_mem;
-+
-+ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
-+ pad = 0;
-+ else
-+ pad = NET_IP_ALIGN;
-+ for (i = 0; i < ring->rx_ring_size; i++) {
-+ dma_addr_t dma_addr = dma_map_single(&netdev->dev,
-+ ring->rx_data[i] + NET_SKB_PAD + pad,
-+ ring->rx_buf_size,
-+ DMA_FROM_DEVICE);
-+ if (unlikely(dma_mapping_error(&netdev->dev, dma_addr)))
-+ goto no_rx_mem;
-+ ring->rx_dma[i].rxd1 = (unsigned int)dma_addr;
-+
-+ if (priv->flags & FE_FLAG_RX_SG_DMA)
-+ ring->rx_dma[i].rxd2 = RX_DMA_PLEN0(ring->rx_buf_size);
-+ else
-+ ring->rx_dma[i].rxd2 = RX_DMA_LSO;
-+ }
-+ ring->rx_calc_idx = ring->rx_ring_size - 1;
-+ /* make sure that all changes to the dma ring are flushed before we
-+ * continue
-+ */
-+ wmb();
-+
-+ fe_reg_w32(ring->rx_phys, FE_REG_RX_BASE_PTR0);
-+ fe_reg_w32(ring->rx_ring_size, FE_REG_RX_MAX_CNT0);
-+ fe_reg_w32(ring->rx_calc_idx, FE_REG_RX_CALC_IDX0);
-+ fe_reg_w32(FE_PST_DRX_IDX0, FE_REG_PDMA_RST_CFG);
-+
-+ return 0;
-+
-+no_rx_mem:
-+ return -ENOMEM;
-+}
-+
-+static void fe_txd_unmap(struct device *dev, struct fe_tx_buf *tx_buf)
-+{
-+ if (tx_buf->flags & FE_TX_FLAGS_SINGLE0) {
-+ dma_unmap_single(dev,
-+ dma_unmap_addr(tx_buf, dma_addr0),
-+ dma_unmap_len(tx_buf, dma_len0),
-+ DMA_TO_DEVICE);
-+ } else if (tx_buf->flags & FE_TX_FLAGS_PAGE0) {
-+ dma_unmap_page(dev,
-+ dma_unmap_addr(tx_buf, dma_addr0),
-+ dma_unmap_len(tx_buf, dma_len0),
-+ DMA_TO_DEVICE);
-+ }
-+ if (tx_buf->flags & FE_TX_FLAGS_PAGE1)
-+ dma_unmap_page(dev,
-+ dma_unmap_addr(tx_buf, dma_addr1),
-+ dma_unmap_len(tx_buf, dma_len1),
-+ DMA_TO_DEVICE);
-+
-+ tx_buf->flags = 0;
-+ if (tx_buf->skb && (tx_buf->skb != (struct sk_buff *)DMA_DUMMY_DESC))
-+ dev_kfree_skb_any(tx_buf->skb);
-+ tx_buf->skb = NULL;
-+}
-+
-+static void fe_clean_tx(struct fe_priv *priv)
-+{
-+ int i;
-+ struct device *dev = &priv->netdev->dev;
-+ struct fe_tx_ring *ring = &priv->tx_ring;
-+
-+ if (ring->tx_buf) {
-+ for (i = 0; i < ring->tx_ring_size; i++)
-+ fe_txd_unmap(dev, &ring->tx_buf[i]);
-+ kfree(ring->tx_buf);
-+ ring->tx_buf = NULL;
-+ }
-+
-+ if (ring->tx_dma) {
-+ dma_free_coherent(dev,
-+ ring->tx_ring_size * sizeof(*ring->tx_dma),
-+ ring->tx_dma,
-+ ring->tx_phys);
-+ ring->tx_dma = NULL;
-+ }
-+
-+ netdev_reset_queue(priv->netdev);
-+}
-+
-+static int fe_alloc_tx(struct fe_priv *priv)
-+{
-+ int i;
-+ struct fe_tx_ring *ring = &priv->tx_ring;
-+
-+ ring->tx_free_idx = 0;
-+ ring->tx_next_idx = 0;
-+ ring->tx_thresh = max((unsigned long)ring->tx_ring_size >> 2,
-+ MAX_SKB_FRAGS);
-+
-+ ring->tx_buf = kcalloc(ring->tx_ring_size, sizeof(*ring->tx_buf),
-+ GFP_KERNEL);
-+ if (!ring->tx_buf)
-+ goto no_tx_mem;
-+
-+ ring->tx_dma = dma_alloc_coherent(&priv->netdev->dev,
-+ ring->tx_ring_size * sizeof(*ring->tx_dma),
-+ &ring->tx_phys,
-+ GFP_ATOMIC | __GFP_ZERO);
-+ if (!ring->tx_dma)
-+ goto no_tx_mem;
-+
-+ for (i = 0; i < ring->tx_ring_size; i++) {
-+ if (priv->soc->tx_dma)
-+ priv->soc->tx_dma(&ring->tx_dma[i]);
-+ ring->tx_dma[i].txd2 = TX_DMA_DESP2_DEF;
-+ }
-+ /* make sure that all changes to the dma ring are flushed before we
-+ * continue
-+ */
-+ wmb();
-+
-+ fe_reg_w32(ring->tx_phys, FE_REG_TX_BASE_PTR0);
-+ fe_reg_w32(ring->tx_ring_size, FE_REG_TX_MAX_CNT0);
-+ fe_reg_w32(0, FE_REG_TX_CTX_IDX0);
-+ fe_reg_w32(FE_PST_DTX_IDX0, FE_REG_PDMA_RST_CFG);
-+
-+ return 0;
-+
-+no_tx_mem:
-+ return -ENOMEM;
-+}
-+
-+static int fe_init_dma(struct fe_priv *priv)
-+{
-+ int err;
-+
-+ err = fe_alloc_tx(priv);
-+ if (err)
-+ return err;
-+
-+ err = fe_alloc_rx(priv);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+static void fe_free_dma(struct fe_priv *priv)
-+{
-+ fe_clean_tx(priv);
-+ fe_clean_rx(priv);
-+}
-+
-+void fe_stats_update(struct fe_priv *priv)
-+{
-+ struct fe_hw_stats *hwstats = priv->hw_stats;
-+ unsigned int base = fe_reg_table[FE_REG_FE_COUNTER_BASE];
-+ u64 stats;
-+
-+ u64_stats_update_begin(&hwstats->syncp);
-+
-+ if (IS_ENABLED(CONFIG_SOC_MT7621)) {
-+ hwstats->rx_bytes += fe_r32(base);
-+ stats = fe_r32(base + 0x04);
-+ if (stats)
-+ hwstats->rx_bytes += (stats << 32);
-+ hwstats->rx_packets += fe_r32(base + 0x08);
-+ hwstats->rx_overflow += fe_r32(base + 0x10);
-+ hwstats->rx_fcs_errors += fe_r32(base + 0x14);
-+ hwstats->rx_short_errors += fe_r32(base + 0x18);
-+ hwstats->rx_long_errors += fe_r32(base + 0x1c);
-+ hwstats->rx_checksum_errors += fe_r32(base + 0x20);
-+ hwstats->rx_flow_control_packets += fe_r32(base + 0x24);
-+ hwstats->tx_skip += fe_r32(base + 0x28);
-+ hwstats->tx_collisions += fe_r32(base + 0x2c);
-+ hwstats->tx_bytes += fe_r32(base + 0x30);
-+ stats = fe_r32(base + 0x34);
-+ if (stats)
-+ hwstats->tx_bytes += (stats << 32);
-+ hwstats->tx_packets += fe_r32(base + 0x38);
-+ } else {
-+ hwstats->tx_bytes += fe_r32(base);
-+ hwstats->tx_packets += fe_r32(base + 0x04);
-+ hwstats->tx_skip += fe_r32(base + 0x08);
-+ hwstats->tx_collisions += fe_r32(base + 0x0c);
-+ hwstats->rx_bytes += fe_r32(base + 0x20);
-+ hwstats->rx_packets += fe_r32(base + 0x24);
-+ hwstats->rx_overflow += fe_r32(base + 0x28);
-+ hwstats->rx_fcs_errors += fe_r32(base + 0x2c);
-+ hwstats->rx_short_errors += fe_r32(base + 0x30);
-+ hwstats->rx_long_errors += fe_r32(base + 0x34);
-+ hwstats->rx_checksum_errors += fe_r32(base + 0x38);
-+ hwstats->rx_flow_control_packets += fe_r32(base + 0x3c);
-+ }
-+
-+ u64_stats_update_end(&hwstats->syncp);
-+}
-+
-+static struct rtnl_link_stats64 *fe_get_stats64(struct net_device *dev,
-+ struct rtnl_link_stats64 *storage)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct fe_hw_stats *hwstats = priv->hw_stats;
-+ unsigned int base = fe_reg_table[FE_REG_FE_COUNTER_BASE];
-+ unsigned int start;
-+
-+ if (!base) {
-+ netdev_stats_to_stats64(storage, &dev->stats);
-+ return storage;
-+ }
-+
-+ if (netif_running(dev) && netif_device_present(dev)) {
-+ if (spin_trylock(&hwstats->stats_lock)) {
-+ fe_stats_update(priv);
-+ spin_unlock(&hwstats->stats_lock);
-+ }
-+ }
-+
-+ do {
-+ start = u64_stats_fetch_begin_irq(&hwstats->syncp);
-+ storage->rx_packets = hwstats->rx_packets;
-+ storage->tx_packets = hwstats->tx_packets;
-+ storage->rx_bytes = hwstats->rx_bytes;
-+ storage->tx_bytes = hwstats->tx_bytes;
-+ storage->collisions = hwstats->tx_collisions;
-+ storage->rx_length_errors = hwstats->rx_short_errors +
-+ hwstats->rx_long_errors;
-+ storage->rx_over_errors = hwstats->rx_overflow;
-+ storage->rx_crc_errors = hwstats->rx_fcs_errors;
-+ storage->rx_errors = hwstats->rx_checksum_errors;
-+ storage->tx_aborted_errors = hwstats->tx_skip;
-+ } while (u64_stats_fetch_retry_irq(&hwstats->syncp, start));
-+
-+ storage->tx_errors = priv->netdev->stats.tx_errors;
-+ storage->rx_dropped = priv->netdev->stats.rx_dropped;
-+ storage->tx_dropped = priv->netdev->stats.tx_dropped;
-+
-+ return storage;
-+}
-+
-+static int fe_vlan_rx_add_vid(struct net_device *dev,
-+ __be16 proto, u16 vid)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ u32 idx = (vid & 0xf);
-+ u32 vlan_cfg;
-+
-+ if (!((fe_reg_table[FE_REG_FE_DMA_VID_BASE]) &&
-+ (dev->features & NETIF_F_HW_VLAN_CTAG_TX)))
-+ return 0;
-+
-+ if (test_bit(idx, &priv->vlan_map)) {
-+ netdev_warn(dev, "disable tx vlan offload\n");
-+ dev->wanted_features &= ~NETIF_F_HW_VLAN_CTAG_TX;
-+ netdev_update_features(dev);
-+ } else {
-+ vlan_cfg = fe_r32(fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
-+ ((idx >> 1) << 2));
-+ if (idx & 0x1) {
-+ vlan_cfg &= 0xffff;
-+ vlan_cfg |= (vid << 16);
-+ } else {
-+ vlan_cfg &= 0xffff0000;
-+ vlan_cfg |= vid;
-+ }
-+ fe_w32(vlan_cfg, fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
-+ ((idx >> 1) << 2));
-+ set_bit(idx, &priv->vlan_map);
-+ }
-+
-+ return 0;
-+}
-+
-+static int fe_vlan_rx_kill_vid(struct net_device *dev,
-+ __be16 proto, u16 vid)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ u32 idx = (vid & 0xf);
-+
-+ if (!((fe_reg_table[FE_REG_FE_DMA_VID_BASE]) &&
-+ (dev->features & NETIF_F_HW_VLAN_CTAG_TX)))
-+ return 0;
-+
-+ clear_bit(idx, &priv->vlan_map);
-+
-+ return 0;
-+}
-+
-+static inline u32 fe_empty_txd(struct fe_tx_ring *ring)
-+{
-+ barrier();
-+ return (u32)(ring->tx_ring_size -
-+ ((ring->tx_next_idx - ring->tx_free_idx) &
-+ (ring->tx_ring_size - 1)));
-+}
-+
-+static int fe_tx_map_dma(struct sk_buff *skb, struct net_device *dev,
-+ int tx_num, struct fe_tx_ring *ring)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct skb_frag_struct *frag;
-+ struct fe_tx_dma txd, *ptxd;
-+ struct fe_tx_buf *tx_buf;
-+ dma_addr_t mapped_addr;
-+ unsigned int nr_frags;
-+ u32 def_txd4;
-+ int i, j, k, frag_size, frag_map_size, offset;
-+
-+ tx_buf = &ring->tx_buf[ring->tx_next_idx];
-+ memset(tx_buf, 0, sizeof(*tx_buf));
-+ memset(&txd, 0, sizeof(txd));
-+ nr_frags = skb_shinfo(skb)->nr_frags;
-+
-+ /* init tx descriptor */
-+ if (priv->soc->tx_dma)
-+ priv->soc->tx_dma(&txd);
-+ else
-+ txd.txd4 = TX_DMA_DESP4_DEF;
-+ def_txd4 = txd.txd4;
-+
-+ /* TX Checksum offload */
-+ if (skb->ip_summed == CHECKSUM_PARTIAL)
-+ txd.txd4 |= TX_DMA_CHKSUM;
-+
-+ /* VLAN header offload */
-+ if (skb_vlan_tag_present(skb)) {
-+ u16 tag = skb_vlan_tag_get(skb);
-+
-+ if (IS_ENABLED(CONFIG_SOC_MT7621))
-+ txd.txd4 |= TX_DMA_INS_VLAN_MT7621 | tag;
-+ else
-+ txd.txd4 |= TX_DMA_INS_VLAN |
-+ ((tag >> VLAN_PRIO_SHIFT) << 4) |
-+ (tag & 0xF);
-+ }
-+
-+ /* TSO: fill MSS info in tcp checksum field */
-+ if (skb_is_gso(skb)) {
-+ if (skb_cow_head(skb, 0)) {
-+ netif_warn(priv, tx_err, dev,
-+ "GSO expand head fail.\n");
-+ goto err_out;
-+ }
-+ if (skb_shinfo(skb)->gso_type &
-+ (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
-+ txd.txd4 |= TX_DMA_TSO;
-+ tcp_hdr(skb)->check = htons(skb_shinfo(skb)->gso_size);
-+ }
-+ }
-+
-+ mapped_addr = dma_map_single(&dev->dev, skb->data,
-+ skb_headlen(skb), DMA_TO_DEVICE);
-+ if (unlikely(dma_mapping_error(&dev->dev, mapped_addr)))
-+ goto err_out;
-+ txd.txd1 = mapped_addr;
-+ txd.txd2 = TX_DMA_PLEN0(skb_headlen(skb));
-+
-+ tx_buf->flags |= FE_TX_FLAGS_SINGLE0;
-+ dma_unmap_addr_set(tx_buf, dma_addr0, mapped_addr);
-+ dma_unmap_len_set(tx_buf, dma_len0, skb_headlen(skb));
-+
-+ /* TX SG offload */
-+ j = ring->tx_next_idx;
-+ k = 0;
-+ for (i = 0; i < nr_frags; i++) {
-+ offset = 0;
-+ frag = &skb_shinfo(skb)->frags[i];
-+ frag_size = skb_frag_size(frag);
-+
-+ while (frag_size > 0) {
-+ frag_map_size = min(frag_size, TX_DMA_BUF_LEN);
-+ mapped_addr = skb_frag_dma_map(&dev->dev, frag, offset,
-+ frag_map_size,
-+ DMA_TO_DEVICE);
-+ if (unlikely(dma_mapping_error(&dev->dev, mapped_addr)))
-+ goto err_dma;
-+
-+ if (k & 0x1) {
-+ j = NEXT_TX_DESP_IDX(j);
-+ txd.txd1 = mapped_addr;
-+ txd.txd2 = TX_DMA_PLEN0(frag_map_size);
-+ txd.txd4 = def_txd4;
-+
-+ tx_buf = &ring->tx_buf[j];
-+ memset(tx_buf, 0, sizeof(*tx_buf));
-+
-+ tx_buf->flags |= FE_TX_FLAGS_PAGE0;
-+ dma_unmap_addr_set(tx_buf, dma_addr0,
-+ mapped_addr);
-+ dma_unmap_len_set(tx_buf, dma_len0,
-+ frag_map_size);
-+ } else {
-+ txd.txd3 = mapped_addr;
-+ txd.txd2 |= TX_DMA_PLEN1(frag_map_size);
-+
-+ tx_buf->skb = (struct sk_buff *)DMA_DUMMY_DESC;
-+ tx_buf->flags |= FE_TX_FLAGS_PAGE1;
-+ dma_unmap_addr_set(tx_buf, dma_addr1,
-+ mapped_addr);
-+ dma_unmap_len_set(tx_buf, dma_len1,
-+ frag_map_size);
-+
-+ if (!((i == (nr_frags - 1)) &&
-+ (frag_map_size == frag_size))) {
-+ fe_set_txd(&txd, &ring->tx_dma[j]);
-+ memset(&txd, 0, sizeof(txd));
-+ }
-+ }
-+ frag_size -= frag_map_size;
-+ offset += frag_map_size;
-+ k++;
-+ }
-+ }
-+
-+ /* set last segment */
-+ if (k & 0x1)
-+ txd.txd2 |= TX_DMA_LS1;
-+ else
-+ txd.txd2 |= TX_DMA_LS0;
-+ fe_set_txd(&txd, &ring->tx_dma[j]);
-+
-+ /* store skb to cleanup */
-+ tx_buf->skb = skb;
-+
-+ netdev_sent_queue(dev, skb->len);
-+ skb_tx_timestamp(skb);
-+
-+ ring->tx_next_idx = NEXT_TX_DESP_IDX(j);
-+ /* make sure that all changes to the dma ring are flushed before we
-+ * continue
-+ */
-+ wmb();
-+ if (unlikely(fe_empty_txd(ring) <= ring->tx_thresh)) {
-+ netif_stop_queue(dev);
-+ smp_mb();
-+ if (unlikely(fe_empty_txd(ring) > ring->tx_thresh))
-+ netif_wake_queue(dev);
-+ }
-+
-+ if (netif_xmit_stopped(netdev_get_tx_queue(dev, 0)) || !skb->xmit_more)
-+ fe_reg_w32(ring->tx_next_idx, FE_REG_TX_CTX_IDX0);
-+
-+ return 0;
-+
-+err_dma:
-+ j = ring->tx_next_idx;
-+ for (i = 0; i < tx_num; i++) {
-+ ptxd = &ring->tx_dma[j];
-+ tx_buf = &ring->tx_buf[j];
-+
-+ /* unmap dma */
-+ fe_txd_unmap(&dev->dev, tx_buf);
-+
-+ ptxd->txd2 = TX_DMA_DESP2_DEF;
-+ j = NEXT_TX_DESP_IDX(j);
-+ }
-+ /* make sure that all changes to the dma ring are flushed before we
-+ * continue
-+ */
-+ wmb();
-+
-+err_out:
-+ return -1;
-+}
-+
-+static inline int fe_skb_padto(struct sk_buff *skb, struct fe_priv *priv)
-+{
-+ unsigned int len;
-+ int ret;
-+
-+ ret = 0;
-+ if (unlikely(skb->len < VLAN_ETH_ZLEN)) {
-+ if ((priv->flags & FE_FLAG_PADDING_64B) &&
-+ !(priv->flags & FE_FLAG_PADDING_BUG))
-+ return ret;
-+
-+ if (skb_vlan_tag_present(skb))
-+ len = ETH_ZLEN;
-+ else if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
-+ len = VLAN_ETH_ZLEN;
-+ else if (!(priv->flags & FE_FLAG_PADDING_64B))
-+ len = ETH_ZLEN;
-+ else
-+ return ret;
-+
-+ if (skb->len < len) {
-+ ret = skb_pad(skb, len - skb->len);
-+ if (ret < 0)
-+ return ret;
-+ skb->len = len;
-+ skb_set_tail_pointer(skb, len);
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static inline int fe_cal_txd_req(struct sk_buff *skb)
-+{
-+ int i, nfrags;
-+ struct skb_frag_struct *frag;
-+
-+ nfrags = 1;
-+ if (skb_is_gso(skb)) {
-+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-+ frag = &skb_shinfo(skb)->frags[i];
-+ nfrags += DIV_ROUND_UP(frag->size, TX_DMA_BUF_LEN);
-+ }
-+ } else {
-+ nfrags += skb_shinfo(skb)->nr_frags;
-+ }
-+
-+ return DIV_ROUND_UP(nfrags, 2);
-+}
-+
-+static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct fe_tx_ring *ring = &priv->tx_ring;
-+ struct net_device_stats *stats = &dev->stats;
-+ int tx_num;
-+ int len = skb->len;
-+
-+ if (fe_skb_padto(skb, priv)) {
-+ netif_warn(priv, tx_err, dev, "tx padding failed!\n");
-+ return NETDEV_TX_OK;
-+ }
-+
-+ tx_num = fe_cal_txd_req(skb);
-+ if (unlikely(fe_empty_txd(ring) <= tx_num)) {
-+ netif_stop_queue(dev);
-+ netif_err(priv, tx_queued, dev,
-+ "Tx Ring full when queue awake!\n");
-+ return NETDEV_TX_BUSY;
-+ }
-+
-+ if (fe_tx_map_dma(skb, dev, tx_num, ring) < 0) {
-+ stats->tx_dropped++;
-+ } else {
-+ stats->tx_packets++;
-+ stats->tx_bytes += len;
-+ }
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+static inline void fe_rx_vlan(struct sk_buff *skb)
-+{
-+ struct ethhdr *ehdr;
-+ u16 vlanid;
-+
-+ if (!__vlan_get_tag(skb, &vlanid)) {
-+ /* pop the vlan tag */
-+ ehdr = (struct ethhdr *)skb->data;
-+ memmove(skb->data + VLAN_HLEN, ehdr, ETH_ALEN * 2);
-+ skb_pull(skb, VLAN_HLEN);
-+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlanid);
-+ }
-+}
-+
-+static int fe_poll_rx(struct napi_struct *napi, int budget,
-+ struct fe_priv *priv, u32 rx_intr)
-+{
-+ struct net_device *netdev = priv->netdev;
-+ struct net_device_stats *stats = &netdev->stats;
-+ struct fe_soc_data *soc = priv->soc;
-+ struct fe_rx_ring *ring = &priv->rx_ring;
-+ int idx = ring->rx_calc_idx;
-+ u32 checksum_bit;
-+ struct sk_buff *skb;
-+ u8 *data, *new_data;
-+ struct fe_rx_dma *rxd, trxd;
-+ int done = 0, pad;
-+ bool rx_vlan = netdev->features & NETIF_F_HW_VLAN_CTAG_RX;
-+
-+ if (netdev->features & NETIF_F_RXCSUM)
-+ checksum_bit = soc->checksum_bit;
-+ else
-+ checksum_bit = 0;
-+
-+ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
-+ pad = 0;
-+ else
-+ pad = NET_IP_ALIGN;
-+
-+ while (done < budget) {
-+ unsigned int pktlen;
-+ dma_addr_t dma_addr;
-+
-+ idx = NEXT_RX_DESP_IDX(idx);
-+ rxd = &ring->rx_dma[idx];
-+ data = ring->rx_data[idx];
-+
-+ fe_get_rxd(&trxd, rxd);
-+ if (!(trxd.rxd2 & RX_DMA_DONE))
-+ break;
-+
-+ /* alloc new buffer */
-+ new_data = netdev_alloc_frag(ring->frag_size);
-+ if (unlikely(!new_data)) {
-+ stats->rx_dropped++;
-+ goto release_desc;
-+ }
-+ dma_addr = dma_map_single(&netdev->dev,
-+ new_data + NET_SKB_PAD + pad,
-+ ring->rx_buf_size,
-+ DMA_FROM_DEVICE);
-+ if (unlikely(dma_mapping_error(&netdev->dev, dma_addr))) {
-+ put_page(virt_to_head_page(new_data));
-+ goto release_desc;
-+ }
-+
-+ /* receive data */
-+ skb = build_skb(data, ring->frag_size);
-+ if (unlikely(!skb)) {
-+ put_page(virt_to_head_page(new_data));
-+ goto release_desc;
-+ }
-+ skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN);
-+
-+ dma_unmap_single(&netdev->dev, trxd.rxd1,
-+ ring->rx_buf_size, DMA_FROM_DEVICE);
-+ pktlen = RX_DMA_GET_PLEN0(trxd.rxd2);
-+ skb->dev = netdev;
-+ skb_put(skb, pktlen);
-+ if (trxd.rxd4 & checksum_bit)
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+ else
-+ skb_checksum_none_assert(skb);
-+ if (rx_vlan)
-+ fe_rx_vlan(skb);
-+ skb->protocol = eth_type_trans(skb, netdev);
-+
-+ stats->rx_packets++;
-+ stats->rx_bytes += pktlen;
-+
-+ napi_gro_receive(napi, skb);
-+
-+ ring->rx_data[idx] = new_data;
-+ rxd->rxd1 = (unsigned int)dma_addr;
-+
-+release_desc:
-+ if (priv->flags & FE_FLAG_RX_SG_DMA)
-+ rxd->rxd2 = RX_DMA_PLEN0(ring->rx_buf_size);
-+ else
-+ rxd->rxd2 = RX_DMA_LSO;
-+
-+ ring->rx_calc_idx = idx;
-+ /* make sure that all changes to the dma ring are flushed before
-+ * we continue
-+ */
-+ wmb();
-+ fe_reg_w32(ring->rx_calc_idx, FE_REG_RX_CALC_IDX0);
-+ done++;
-+ }
-+
-+ if (done < budget)
-+ fe_reg_w32(rx_intr, FE_REG_FE_INT_STATUS);
-+
-+ return done;
-+}
-+
-+static int fe_poll_tx(struct fe_priv *priv, int budget, u32 tx_intr,
-+ int *tx_again)
-+{
-+ struct net_device *netdev = priv->netdev;
-+ struct device *dev = &netdev->dev;
-+ unsigned int bytes_compl = 0;
-+ struct sk_buff *skb;
-+ struct fe_tx_buf *tx_buf;
-+ int done = 0;
-+ u32 idx, hwidx;
-+ struct fe_tx_ring *ring = &priv->tx_ring;
-+
-+ idx = ring->tx_free_idx;
-+ hwidx = fe_reg_r32(FE_REG_TX_DTX_IDX0);
-+
-+ while ((idx != hwidx) && budget) {
-+ tx_buf = &ring->tx_buf[idx];
-+ skb = tx_buf->skb;
-+
-+ if (!skb)
-+ break;
-+
-+ if (skb != (struct sk_buff *)DMA_DUMMY_DESC) {
-+ bytes_compl += skb->len;
-+ done++;
-+ budget--;
-+ }
-+ fe_txd_unmap(dev, tx_buf);
-+ idx = NEXT_TX_DESP_IDX(idx);
-+ }
-+ ring->tx_free_idx = idx;
-+
-+ if (idx == hwidx) {
-+ /* read hw index again make sure no new tx packet */
-+ hwidx = fe_reg_r32(FE_REG_TX_DTX_IDX0);
-+ if (idx == hwidx)
-+ fe_reg_w32(tx_intr, FE_REG_FE_INT_STATUS);
-+ else
-+ *tx_again = 1;
-+ } else {
-+ *tx_again = 1;
-+ }
-+
-+ if (done) {
-+ netdev_completed_queue(netdev, done, bytes_compl);
-+ smp_mb();
-+ if (unlikely(netif_queue_stopped(netdev) &&
-+ (fe_empty_txd(ring) > ring->tx_thresh)))
-+ netif_wake_queue(netdev);
-+ }
-+
-+ return done;
-+}
-+
-+static int fe_poll(struct napi_struct *napi, int budget)
-+{
-+ struct fe_priv *priv = container_of(napi, struct fe_priv, rx_napi);
-+ struct fe_hw_stats *hwstat = priv->hw_stats;
-+ int tx_done, rx_done, tx_again;
-+ u32 status, fe_status, status_reg, mask;
-+ u32 tx_intr, rx_intr, status_intr;
-+
-+ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
-+ fe_status = status;
-+ tx_intr = priv->soc->tx_int;
-+ rx_intr = priv->soc->rx_int;
-+ status_intr = priv->soc->status_int;
-+ tx_done = 0;
-+ rx_done = 0;
-+ tx_again = 0;
-+
-+ if (fe_reg_table[FE_REG_FE_INT_STATUS2]) {
-+ fe_status = fe_reg_r32(FE_REG_FE_INT_STATUS2);
-+ status_reg = FE_REG_FE_INT_STATUS2;
-+ } else {
-+ status_reg = FE_REG_FE_INT_STATUS;
-+ }
-+
-+ if (status & tx_intr)
-+ tx_done = fe_poll_tx(priv, budget, tx_intr, &tx_again);
-+
-+ if (status & rx_intr)
-+ rx_done = fe_poll_rx(napi, budget, priv, rx_intr);
-+
-+ if (unlikely(fe_status & status_intr)) {
-+ if (hwstat && spin_trylock(&hwstat->stats_lock)) {
-+ fe_stats_update(priv);
-+ spin_unlock(&hwstat->stats_lock);
-+ }
-+ fe_reg_w32(status_intr, status_reg);
-+ }
-+
-+ if (unlikely(netif_msg_intr(priv))) {
-+ mask = fe_reg_r32(FE_REG_FE_INT_ENABLE);
-+ netdev_info(priv->netdev,
-+ "done tx %d, rx %d, intr 0x%08x/0x%x\n",
-+ tx_done, rx_done, status, mask);
-+ }
-+
-+ if (!tx_again && (rx_done < budget)) {
-+ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
-+ if (status & (tx_intr | rx_intr)) {
-+ /* let napi poll again */
-+ rx_done = budget;
-+ goto poll_again;
-+ }
-+
-+ napi_complete(napi);
-+ fe_int_enable(tx_intr | rx_intr);
-+ } else {
-+ rx_done = budget;
-+ }
-+
-+poll_again:
-+ return rx_done;
-+}
-+
-+static void fe_tx_timeout(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct fe_tx_ring *ring = &priv->tx_ring;
-+
-+ priv->netdev->stats.tx_errors++;
-+ netif_err(priv, tx_err, dev,
-+ "transmit timed out\n");
-+ netif_info(priv, drv, dev, "dma_cfg:%08x\n",
-+ fe_reg_r32(FE_REG_PDMA_GLO_CFG));
-+ netif_info(priv, drv, dev, "tx_ring=%d, "
-+ "base=%08x, max=%u, ctx=%u, dtx=%u, fdx=%hu, next=%hu\n",
-+ 0, fe_reg_r32(FE_REG_TX_BASE_PTR0),
-+ fe_reg_r32(FE_REG_TX_MAX_CNT0),
-+ fe_reg_r32(FE_REG_TX_CTX_IDX0),
-+ fe_reg_r32(FE_REG_TX_DTX_IDX0),
-+ ring->tx_free_idx,
-+ ring->tx_next_idx);
-+ netif_info(priv, drv, dev,
-+ "rx_ring=%d, base=%08x, max=%u, calc=%u, drx=%u\n",
-+ 0, fe_reg_r32(FE_REG_RX_BASE_PTR0),
-+ fe_reg_r32(FE_REG_RX_MAX_CNT0),
-+ fe_reg_r32(FE_REG_RX_CALC_IDX0),
-+ fe_reg_r32(FE_REG_RX_DRX_IDX0));
-+
-+ if (!test_and_set_bit(FE_FLAG_RESET_PENDING, priv->pending_flags))
-+ schedule_work(&priv->pending_work);
-+}
-+
-+static irqreturn_t fe_handle_irq(int irq, void *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ u32 status, int_mask;
-+
-+ status = fe_reg_r32(FE_REG_FE_INT_STATUS);
-+
-+ if (unlikely(!status))
-+ return IRQ_NONE;
-+
-+ int_mask = (priv->soc->rx_int | priv->soc->tx_int);
-+ if (likely(status & int_mask)) {
-+ if (likely(napi_schedule_prep(&priv->rx_napi))) {
-+ fe_int_disable(int_mask);
-+ __napi_schedule(&priv->rx_napi);
-+ }
-+ } else {
-+ fe_reg_w32(status, FE_REG_FE_INT_STATUS);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void fe_poll_controller(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ u32 int_mask = priv->soc->tx_int | priv->soc->rx_int;
-+
-+ fe_int_disable(int_mask);
-+ fe_handle_irq(dev->irq, dev);
-+ fe_int_enable(int_mask);
-+}
-+#endif
-+
-+int fe_set_clock_cycle(struct fe_priv *priv)
-+{
-+ unsigned long sysclk = priv->sysclk;
-+
-+ sysclk /= FE_US_CYC_CNT_DIVISOR;
-+ sysclk <<= FE_US_CYC_CNT_SHIFT;
-+
-+ fe_w32((fe_r32(FE_FE_GLO_CFG) &
-+ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) |
-+ sysclk,
-+ FE_FE_GLO_CFG);
-+ return 0;
-+}
-+
-+void fe_fwd_config(struct fe_priv *priv)
-+{
-+ u32 fwd_cfg;
-+
-+ fwd_cfg = fe_r32(FE_GDMA1_FWD_CFG);
-+
-+ /* disable jumbo frame */
-+ if (priv->flags & FE_FLAG_JUMBO_FRAME)
-+ fwd_cfg &= ~FE_GDM1_JMB_EN;
-+
-+ /* set unicast/multicast/broadcast frame to cpu */
-+ fwd_cfg &= ~0xffff;
-+
-+ fe_w32(fwd_cfg, FE_GDMA1_FWD_CFG);
-+}
-+
-+static void fe_rxcsum_config(bool enable)
-+{
-+ if (enable)
-+ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) | (FE_GDM1_ICS_EN |
-+ FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
-+ FE_GDMA1_FWD_CFG);
-+ else
-+ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) & ~(FE_GDM1_ICS_EN |
-+ FE_GDM1_TCS_EN | FE_GDM1_UCS_EN),
-+ FE_GDMA1_FWD_CFG);
-+}
-+
-+static void fe_txcsum_config(bool enable)
-+{
-+ if (enable)
-+ fe_w32(fe_r32(FE_CDMA_CSG_CFG) | (FE_ICS_GEN_EN |
-+ FE_TCS_GEN_EN | FE_UCS_GEN_EN),
-+ FE_CDMA_CSG_CFG);
-+ else
-+ fe_w32(fe_r32(FE_CDMA_CSG_CFG) & ~(FE_ICS_GEN_EN |
-+ FE_TCS_GEN_EN | FE_UCS_GEN_EN),
-+ FE_CDMA_CSG_CFG);
-+}
-+
-+void fe_csum_config(struct fe_priv *priv)
-+{
-+ struct net_device *dev = priv_netdev(priv);
-+
-+ fe_txcsum_config((dev->features & NETIF_F_IP_CSUM));
-+ fe_rxcsum_config((dev->features & NETIF_F_RXCSUM));
-+}
-+
-+static int fe_hw_init(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ int i, err;
-+
-+ err = devm_request_irq(priv->device, dev->irq, fe_handle_irq, 0,
-+ dev_name(priv->device), dev);
-+ if (err)
-+ return err;
-+
-+ if (priv->soc->set_mac)
-+ priv->soc->set_mac(priv, dev->dev_addr);
-+ else
-+ fe_hw_set_macaddr(priv, dev->dev_addr);
-+
-+ /* disable delay interrupt */
-+ fe_reg_w32(0, FE_REG_DLY_INT_CFG);
-+
-+ fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
-+
-+ /* frame engine will push VLAN tag regarding to VIDX feild in Tx desc */
-+ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
-+ for (i = 0; i < 16; i += 2)
-+ fe_w32(((i + 1) << 16) + i,
-+ fe_reg_table[FE_REG_FE_DMA_VID_BASE] +
-+ (i * 2));
-+
-+ if (priv->soc->fwd_config(priv))
-+ netdev_err(dev, "unable to get clock\n");
-+
-+ if (fe_reg_table[FE_REG_FE_RST_GL]) {
-+ fe_reg_w32(1, FE_REG_FE_RST_GL);
-+ fe_reg_w32(0, FE_REG_FE_RST_GL);
-+ }
-+
-+ return 0;
-+}
-+
-+static int fe_open(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ u32 val;
-+ int err;
-+
-+ err = fe_init_dma(priv);
-+ if (err) {
-+ fe_free_dma(priv);
-+ return err;
-+ }
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+
-+ val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN;
-+ if (priv->flags & FE_FLAG_RX_2B_OFFSET)
-+ val |= FE_RX_2B_OFFSET;
-+ val |= priv->soc->pdma_glo_cfg;
-+ fe_reg_w32(val, FE_REG_PDMA_GLO_CFG);
-+
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+
-+ if (priv->phy)
-+ priv->phy->start(priv);
-+
-+ if (priv->soc->has_carrier && priv->soc->has_carrier(priv))
-+ netif_carrier_on(dev);
-+
-+ napi_enable(&priv->rx_napi);
-+ fe_int_enable(priv->soc->tx_int | priv->soc->rx_int);
-+ netif_start_queue(dev);
-+
-+ return 0;
-+}
-+
-+static int fe_stop(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ unsigned long flags;
-+ int i;
-+
-+ netif_tx_disable(dev);
-+ fe_int_disable(priv->soc->tx_int | priv->soc->rx_int);
-+ napi_disable(&priv->rx_napi);
-+
-+ if (priv->phy)
-+ priv->phy->stop(priv);
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+
-+ fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
-+ ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN),
-+ FE_REG_PDMA_GLO_CFG);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+
-+ /* wait dma stop */
-+ for (i = 0; i < 10; i++) {
-+ if (fe_reg_r32(FE_REG_PDMA_GLO_CFG) &
-+ (FE_TX_DMA_BUSY | FE_RX_DMA_BUSY)) {
-+ msleep(20);
-+ continue;
-+ }
-+ break;
-+ }
-+
-+ fe_free_dma(priv);
-+
-+ return 0;
-+}
-+
-+static int __init fe_init(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ struct device_node *port;
-+ const char *mac_addr;
-+ int err;
-+
-+ priv->soc->reset_fe();
-+
-+ if (priv->soc->switch_init)
-+ if (priv->soc->switch_init(priv)) {
-+ netdev_err(dev, "failed to initialize switch core\n");
-+ return -ENODEV;
-+ }
-+
-+ mac_addr = of_get_mac_address(priv->device->of_node);
-+ if (mac_addr)
-+ ether_addr_copy(dev->dev_addr, mac_addr);
-+
-+ /* If the mac address is invalid, use random mac address */
-+ if (!is_valid_ether_addr(dev->dev_addr)) {
-+ random_ether_addr(dev->dev_addr);
-+ dev_err(priv->device, "generated random MAC address %pM\n",
-+ dev->dev_addr);
-+ }
-+
-+ err = fe_mdio_init(priv);
-+ if (err)
-+ return err;
-+
-+ if (priv->soc->port_init)
-+ for_each_child_of_node(priv->device->of_node, port)
-+ if (of_device_is_compatible(port, "mediatek,eth-port") &&
-+ of_device_is_available(port))
-+ priv->soc->port_init(priv, port);
-+
-+ if (priv->phy) {
-+ err = priv->phy->connect(priv);
-+ if (err)
-+ goto err_phy_disconnect;
-+ }
-+
-+ err = fe_hw_init(dev);
-+ if (!err)
-+ return 0;
-+
-+err_phy_disconnect:
-+ if (priv->phy)
-+ priv->phy->disconnect(priv);
-+ fe_mdio_cleanup(priv);
-+
-+ return err;
-+}
-+
-+static void fe_uninit(struct net_device *dev)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ if (priv->phy)
-+ priv->phy->disconnect(priv);
-+ fe_mdio_cleanup(priv);
-+
-+ fe_reg_w32(0, FE_REG_FE_INT_ENABLE);
-+ free_irq(dev->irq, dev);
-+}
-+
-+static int fe_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ if (!priv->phy_dev)
-+ return -ENODEV;
-+
-+ switch (cmd) {
-+ case SIOCGMIIPHY:
-+ case SIOCGMIIREG:
-+ case SIOCSMIIREG:
-+ return phy_mii_ioctl(priv->phy_dev, ifr, cmd);
-+ default:
-+ break;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static int fe_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ struct fe_priv *priv = netdev_priv(dev);
-+ int frag_size, old_mtu;
-+ u32 fwd_cfg;
-+
-+ if (!(priv->flags & FE_FLAG_JUMBO_FRAME))
-+ return eth_change_mtu(dev, new_mtu);
-+
-+ frag_size = fe_max_frag_size(new_mtu);
-+ if (new_mtu < 68 || frag_size > PAGE_SIZE)
-+ return -EINVAL;
-+
-+ old_mtu = dev->mtu;
-+ dev->mtu = new_mtu;
-+
-+ /* return early if the buffer sizes will not change */
-+ if (old_mtu <= ETH_DATA_LEN && new_mtu <= ETH_DATA_LEN)
-+ return 0;
-+ if (old_mtu > ETH_DATA_LEN && new_mtu > ETH_DATA_LEN)
-+ return 0;
-+
-+ if (new_mtu <= ETH_DATA_LEN)
-+ priv->rx_ring.frag_size = fe_max_frag_size(ETH_DATA_LEN);
-+ else
-+ priv->rx_ring.frag_size = PAGE_SIZE;
-+ priv->rx_ring.rx_buf_size = fe_max_buf_size(priv->rx_ring.frag_size);
-+
-+ if (!netif_running(dev))
-+ return 0;
-+
-+ fe_stop(dev);
-+ fwd_cfg = fe_r32(FE_GDMA1_FWD_CFG);
-+ if (new_mtu <= ETH_DATA_LEN) {
-+ fwd_cfg &= ~FE_GDM1_JMB_EN;
-+ } else {
-+ fwd_cfg &= ~(FE_GDM1_JMB_LEN_MASK << FE_GDM1_JMB_LEN_SHIFT);
-+ fwd_cfg |= (DIV_ROUND_UP(frag_size, 1024) <<
-+ FE_GDM1_JMB_LEN_SHIFT) | FE_GDM1_JMB_EN;
-+ }
-+ fe_w32(fwd_cfg, FE_GDMA1_FWD_CFG);
-+
-+ return fe_open(dev);
-+}
-+
-+static const struct net_device_ops fe_netdev_ops = {
-+ .ndo_init = fe_init,
-+ .ndo_uninit = fe_uninit,
-+ .ndo_open = fe_open,
-+ .ndo_stop = fe_stop,
-+ .ndo_start_xmit = fe_start_xmit,
-+ .ndo_set_mac_address = fe_set_mac_address,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_do_ioctl = fe_do_ioctl,
-+ .ndo_change_mtu = fe_change_mtu,
-+ .ndo_tx_timeout = fe_tx_timeout,
-+ .ndo_get_stats64 = fe_get_stats64,
-+ .ndo_vlan_rx_add_vid = fe_vlan_rx_add_vid,
-+ .ndo_vlan_rx_kill_vid = fe_vlan_rx_kill_vid,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+ .ndo_poll_controller = fe_poll_controller,
-+#endif
-+};
-+
-+static void fe_reset_pending(struct fe_priv *priv)
-+{
-+ struct net_device *dev = priv->netdev;
-+ int err;
-+
-+ rtnl_lock();
-+ fe_stop(dev);
-+
-+ err = fe_open(dev);
-+ if (err) {
-+ netif_alert(priv, ifup, dev,
-+ "Driver up/down cycle failed, closing device.\n");
-+ dev_close(dev);
-+ }
-+ rtnl_unlock();
-+}
-+
-+static const struct fe_work_t fe_work[] = {
-+ {FE_FLAG_RESET_PENDING, fe_reset_pending},
-+};
-+
-+static void fe_pending_work(struct work_struct *work)
-+{
-+ struct fe_priv *priv = container_of(work, struct fe_priv, pending_work);
-+ int i;
-+ bool pending;
-+
-+ for (i = 0; i < ARRAY_SIZE(fe_work); i++) {
-+ pending = test_and_clear_bit(fe_work[i].bitnr,
-+ priv->pending_flags);
-+ if (pending)
-+ fe_work[i].action(priv);
-+ }
-+}
-+
-+static int fe_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const struct of_device_id *match;
-+ struct fe_soc_data *soc;
-+ struct net_device *netdev;
-+ struct fe_priv *priv;
-+ struct clk *sysclk;
-+ int err, napi_weight;
-+
-+ device_reset(&pdev->dev);
-+
-+ match = of_match_device(of_fe_match, &pdev->dev);
-+ soc = (struct fe_soc_data *)match->data;
-+
-+ if (soc->reg_table)
-+ fe_reg_table = soc->reg_table;
-+ else
-+ soc->reg_table = fe_reg_table;
-+
-+ fe_base = devm_ioremap_resource(&pdev->dev, res);
-+ if (!fe_base) {
-+ err = -EADDRNOTAVAIL;
-+ goto err_out;
-+ }
-+
-+ netdev = alloc_etherdev(sizeof(*priv));
-+ if (!netdev) {
-+ dev_err(&pdev->dev, "alloc_etherdev failed\n");
-+ err = -ENOMEM;
-+ goto err_iounmap;
-+ }
-+
-+ SET_NETDEV_DEV(netdev, &pdev->dev);
-+ netdev->netdev_ops = &fe_netdev_ops;
-+ netdev->base_addr = (unsigned long)fe_base;
-+
-+ netdev->irq = platform_get_irq(pdev, 0);
-+ if (netdev->irq < 0) {
-+ dev_err(&pdev->dev, "no IRQ resource found\n");
-+ err = -ENXIO;
-+ goto err_free_dev;
-+ }
-+
-+ if (soc->init_data)
-+ soc->init_data(soc, netdev);
-+ /* fake NETIF_F_HW_VLAN_CTAG_RX for good GRO performance */
-+ netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
-+ netdev->vlan_features = netdev->hw_features &
-+ ~(NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);
-+ netdev->features |= netdev->hw_features;
-+
-+ /* fake rx vlan filter func. to support tx vlan offload func */
-+ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE])
-+ netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
-+
-+ priv = netdev_priv(netdev);
-+ spin_lock_init(&priv->page_lock);
-+ if (fe_reg_table[FE_REG_FE_COUNTER_BASE]) {
-+ priv->hw_stats = kzalloc(sizeof(*priv->hw_stats), GFP_KERNEL);
-+ if (!priv->hw_stats) {
-+ err = -ENOMEM;
-+ goto err_free_dev;
-+ }
-+ spin_lock_init(&priv->hw_stats->stats_lock);
-+ }
-+
-+ sysclk = devm_clk_get(&pdev->dev, NULL);
-+ if (!IS_ERR(sysclk)) {
-+ priv->sysclk = clk_get_rate(sysclk);
-+ } else if ((priv->flags & FE_FLAG_CALIBRATE_CLK)) {
-+ dev_err(&pdev->dev, "this soc needs a clk for calibration\n");
-+ err = -ENXIO;
-+ goto err_free_dev;
-+ }
-+
-+ priv->switch_np = of_parse_phandle(pdev->dev.of_node, "mediatek,switch", 0);
-+ if ((priv->flags & FE_FLAG_HAS_SWITCH) && !priv->switch_np) {
-+ dev_err(&pdev->dev, "failed to read switch phandle\n");
-+ err = -ENODEV;
-+ goto err_free_dev;
-+ }
-+
-+ priv->netdev = netdev;
-+ priv->device = &pdev->dev;
-+ priv->soc = soc;
-+ priv->msg_enable = netif_msg_init(fe_msg_level, FE_DEFAULT_MSG_ENABLE);
-+ priv->rx_ring.frag_size = fe_max_frag_size(ETH_DATA_LEN);
-+ priv->rx_ring.rx_buf_size = fe_max_buf_size(priv->rx_ring.frag_size);
-+ priv->tx_ring.tx_ring_size = NUM_DMA_DESC;
-+ priv->rx_ring.rx_ring_size = NUM_DMA_DESC;
-+ INIT_WORK(&priv->pending_work, fe_pending_work);
-+
-+ napi_weight = 32;
-+ if (priv->flags & FE_FLAG_NAPI_WEIGHT) {
-+ napi_weight *= 4;
-+ priv->tx_ring.tx_ring_size *= 4;
-+ priv->rx_ring.rx_ring_size *= 4;
-+ }
-+ netif_napi_add(netdev, &priv->rx_napi, fe_poll, napi_weight);
-+ fe_set_ethtool_ops(netdev);
-+
-+ err = register_netdev(netdev);
-+ if (err) {
-+ dev_err(&pdev->dev, "error bringing up device\n");
-+ goto err_free_dev;
-+ }
-+
-+ platform_set_drvdata(pdev, netdev);
-+
-+ netif_info(priv, probe, netdev, "mediatek frame engine at 0x%08lx, irq %d\n",
-+ netdev->base_addr, netdev->irq);
-+
-+ return 0;
-+
-+err_free_dev:
-+ free_netdev(netdev);
-+err_iounmap:
-+ devm_iounmap(&pdev->dev, fe_base);
-+err_out:
-+ return err;
-+}
-+
-+static int fe_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct fe_priv *priv = netdev_priv(dev);
-+
-+ netif_napi_del(&priv->rx_napi);
-+ kfree(priv->hw_stats);
-+
-+ cancel_work_sync(&priv->pending_work);
-+
-+ unregister_netdev(dev);
-+ free_netdev(dev);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver fe_driver = {
-+ .probe = fe_probe,
-+ .remove = fe_remove,
-+ .driver = {
-+ .name = "mtk_soc_eth",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_fe_match,
-+ },
-+};
-+
-+module_platform_driver(fe_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
-+MODULE_VERSION(MTK_FE_DRV_VERSION);
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -0,0 +1,522 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#ifndef FE_ETH_H
-+#define FE_ETH_H
-+
-+#include <linux/mii.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/phy.h>
-+#include <linux/ethtool.h>
-+#include <linux/version.h>
-+
-+enum fe_reg {
-+ FE_REG_PDMA_GLO_CFG = 0,
-+ FE_REG_PDMA_RST_CFG,
-+ FE_REG_DLY_INT_CFG,
-+ FE_REG_TX_BASE_PTR0,
-+ FE_REG_TX_MAX_CNT0,
-+ FE_REG_TX_CTX_IDX0,
-+ FE_REG_TX_DTX_IDX0,
-+ FE_REG_RX_BASE_PTR0,
-+ FE_REG_RX_MAX_CNT0,
-+ FE_REG_RX_CALC_IDX0,
-+ FE_REG_RX_DRX_IDX0,
-+ FE_REG_FE_INT_ENABLE,
-+ FE_REG_FE_INT_STATUS,
-+ FE_REG_FE_DMA_VID_BASE,
-+ FE_REG_FE_COUNTER_BASE,
-+ FE_REG_FE_RST_GL,
-+ FE_REG_FE_INT_STATUS2,
-+ FE_REG_COUNT
-+};
-+
-+enum fe_work_flag {
-+ FE_FLAG_RESET_PENDING,
-+ FE_FLAG_MAX
-+};
-+
-+#define MTK_FE_DRV_VERSION "0.1.2"
-+
-+/* power of 2 to let NEXT_TX_DESP_IDX work */
-+#define NUM_DMA_DESC BIT(7)
-+#define MAX_DMA_DESC 0xfff
-+
-+#define FE_DELAY_EN_INT 0x80
-+#define FE_DELAY_MAX_INT 0x04
-+#define FE_DELAY_MAX_TOUT 0x04
-+#define FE_DELAY_TIME 20
-+#define FE_DELAY_CHAN (((FE_DELAY_EN_INT | FE_DELAY_MAX_INT) << 8) | \
-+ FE_DELAY_MAX_TOUT)
-+#define FE_DELAY_INIT ((FE_DELAY_CHAN << 16) | FE_DELAY_CHAN)
-+#define FE_PSE_FQFC_CFG_INIT 0x80504000
-+#define FE_PSE_FQFC_CFG_256Q 0xff908000
-+
-+/* interrupt bits */
-+#define FE_CNT_PPE_AF BIT(31)
-+#define FE_CNT_GDM_AF BIT(29)
-+#define FE_PSE_P2_FC BIT(26)
-+#define FE_PSE_BUF_DROP BIT(24)
-+#define FE_GDM_OTHER_DROP BIT(23)
-+#define FE_PSE_P1_FC BIT(22)
-+#define FE_PSE_P0_FC BIT(21)
-+#define FE_PSE_FQ_EMPTY BIT(20)
-+#define FE_GE1_STA_CHG BIT(18)
-+#define FE_TX_COHERENT BIT(17)
-+#define FE_RX_COHERENT BIT(16)
-+#define FE_TX_DONE_INT3 BIT(11)
-+#define FE_TX_DONE_INT2 BIT(10)
-+#define FE_TX_DONE_INT1 BIT(9)
-+#define FE_TX_DONE_INT0 BIT(8)
-+#define FE_RX_DONE_INT0 BIT(2)
-+#define FE_TX_DLY_INT BIT(1)
-+#define FE_RX_DLY_INT BIT(0)
-+
-+#define FE_RX_DONE_INT FE_RX_DONE_INT0
-+#define FE_TX_DONE_INT (FE_TX_DONE_INT0 | FE_TX_DONE_INT1 | \
-+ FE_TX_DONE_INT2 | FE_TX_DONE_INT3)
-+
-+#define RT5350_RX_DLY_INT BIT(30)
-+#define RT5350_TX_DLY_INT BIT(28)
-+#define RT5350_RX_DONE_INT1 BIT(17)
-+#define RT5350_RX_DONE_INT0 BIT(16)
-+#define RT5350_TX_DONE_INT3 BIT(3)
-+#define RT5350_TX_DONE_INT2 BIT(2)
-+#define RT5350_TX_DONE_INT1 BIT(1)
-+#define RT5350_TX_DONE_INT0 BIT(0)
-+
-+#define RT5350_RX_DONE_INT (RT5350_RX_DONE_INT0 | RT5350_RX_DONE_INT1)
-+#define RT5350_TX_DONE_INT (RT5350_TX_DONE_INT0 | RT5350_TX_DONE_INT1 | \
-+ RT5350_TX_DONE_INT2 | RT5350_TX_DONE_INT3)
-+
-+/* registers */
-+#define FE_FE_OFFSET 0x0000
-+#define FE_GDMA_OFFSET 0x0020
-+#define FE_PSE_OFFSET 0x0040
-+#define FE_GDMA2_OFFSET 0x0060
-+#define FE_CDMA_OFFSET 0x0080
-+#define FE_DMA_VID0 0x00a8
-+#define FE_PDMA_OFFSET 0x0100
-+#define FE_PPE_OFFSET 0x0200
-+#define FE_CMTABLE_OFFSET 0x0400
-+#define FE_POLICYTABLE_OFFSET 0x1000
-+
-+#define RT5350_PDMA_OFFSET 0x0800
-+#define RT5350_SDM_OFFSET 0x0c00
-+
-+#define FE_MDIO_ACCESS (FE_FE_OFFSET + 0x00)
-+#define FE_MDIO_CFG (FE_FE_OFFSET + 0x04)
-+#define FE_FE_GLO_CFG (FE_FE_OFFSET + 0x08)
-+#define FE_FE_RST_GL (FE_FE_OFFSET + 0x0C)
-+#define FE_FE_INT_STATUS (FE_FE_OFFSET + 0x10)
-+#define FE_FE_INT_ENABLE (FE_FE_OFFSET + 0x14)
-+#define FE_MDIO_CFG2 (FE_FE_OFFSET + 0x18)
-+#define FE_FOC_TS_T (FE_FE_OFFSET + 0x1C)
-+
-+#define FE_GDMA1_FWD_CFG (FE_GDMA_OFFSET + 0x00)
-+#define FE_GDMA1_SCH_CFG (FE_GDMA_OFFSET + 0x04)
-+#define FE_GDMA1_SHPR_CFG (FE_GDMA_OFFSET + 0x08)
-+#define FE_GDMA1_MAC_ADRL (FE_GDMA_OFFSET + 0x0C)
-+#define FE_GDMA1_MAC_ADRH (FE_GDMA_OFFSET + 0x10)
-+
-+#define FE_GDMA2_FWD_CFG (FE_GDMA2_OFFSET + 0x00)
-+#define FE_GDMA2_SCH_CFG (FE_GDMA2_OFFSET + 0x04)
-+#define FE_GDMA2_SHPR_CFG (FE_GDMA2_OFFSET + 0x08)
-+#define FE_GDMA2_MAC_ADRL (FE_GDMA2_OFFSET + 0x0C)
-+#define FE_GDMA2_MAC_ADRH (FE_GDMA2_OFFSET + 0x10)
-+
-+#define FE_PSE_FQ_CFG (FE_PSE_OFFSET + 0x00)
-+#define FE_CDMA_FC_CFG (FE_PSE_OFFSET + 0x04)
-+#define FE_GDMA1_FC_CFG (FE_PSE_OFFSET + 0x08)
-+#define FE_GDMA2_FC_CFG (FE_PSE_OFFSET + 0x0C)
-+
-+#define FE_CDMA_CSG_CFG (FE_CDMA_OFFSET + 0x00)
-+#define FE_CDMA_SCH_CFG (FE_CDMA_OFFSET + 0x04)
-+
-+#ifdef CONFIG_SOC_MT7621
-+#define MT7620A_GDMA_OFFSET 0x0500
-+#else
-+#define MT7620A_GDMA_OFFSET 0x0600
-+#endif
-+#define MT7620A_GDMA1_FWD_CFG (MT7620A_GDMA_OFFSET + 0x00)
-+#define MT7620A_FE_GDMA1_SCH_CFG (MT7620A_GDMA_OFFSET + 0x04)
-+#define MT7620A_FE_GDMA1_SHPR_CFG (MT7620A_GDMA_OFFSET + 0x08)
-+#define MT7620A_FE_GDMA1_MAC_ADRL (MT7620A_GDMA_OFFSET + 0x0C)
-+#define MT7620A_FE_GDMA1_MAC_ADRH (MT7620A_GDMA_OFFSET + 0x10)
-+
-+#define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00)
-+#define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04)
-+#define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08)
-+#define RT5350_TX_DTX_IDX0 (RT5350_PDMA_OFFSET + 0x0C)
-+#define RT5350_TX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x10)
-+#define RT5350_TX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x14)
-+#define RT5350_TX_CTX_IDX1 (RT5350_PDMA_OFFSET + 0x18)
-+#define RT5350_TX_DTX_IDX1 (RT5350_PDMA_OFFSET + 0x1C)
-+#define RT5350_TX_BASE_PTR2 (RT5350_PDMA_OFFSET + 0x20)
-+#define RT5350_TX_MAX_CNT2 (RT5350_PDMA_OFFSET + 0x24)
-+#define RT5350_TX_CTX_IDX2 (RT5350_PDMA_OFFSET + 0x28)
-+#define RT5350_TX_DTX_IDX2 (RT5350_PDMA_OFFSET + 0x2C)
-+#define RT5350_TX_BASE_PTR3 (RT5350_PDMA_OFFSET + 0x30)
-+#define RT5350_TX_MAX_CNT3 (RT5350_PDMA_OFFSET + 0x34)
-+#define RT5350_TX_CTX_IDX3 (RT5350_PDMA_OFFSET + 0x38)
-+#define RT5350_TX_DTX_IDX3 (RT5350_PDMA_OFFSET + 0x3C)
-+#define RT5350_RX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x100)
-+#define RT5350_RX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x104)
-+#define RT5350_RX_CALC_IDX0 (RT5350_PDMA_OFFSET + 0x108)
-+#define RT5350_RX_DRX_IDX0 (RT5350_PDMA_OFFSET + 0x10C)
-+#define RT5350_RX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x110)
-+#define RT5350_RX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x114)
-+#define RT5350_RX_CALC_IDX1 (RT5350_PDMA_OFFSET + 0x118)
-+#define RT5350_RX_DRX_IDX1 (RT5350_PDMA_OFFSET + 0x11C)
-+#define RT5350_PDMA_GLO_CFG (RT5350_PDMA_OFFSET + 0x204)
-+#define RT5350_PDMA_RST_CFG (RT5350_PDMA_OFFSET + 0x208)
-+#define RT5350_DLY_INT_CFG (RT5350_PDMA_OFFSET + 0x20c)
-+#define RT5350_FE_INT_STATUS (RT5350_PDMA_OFFSET + 0x220)
-+#define RT5350_FE_INT_ENABLE (RT5350_PDMA_OFFSET + 0x228)
-+#define RT5350_PDMA_SCH_CFG (RT5350_PDMA_OFFSET + 0x280)
-+
-+#define FE_PDMA_GLO_CFG (FE_PDMA_OFFSET + 0x00)
-+#define FE_PDMA_RST_CFG (FE_PDMA_OFFSET + 0x04)
-+#define FE_PDMA_SCH_CFG (FE_PDMA_OFFSET + 0x08)
-+#define FE_DLY_INT_CFG (FE_PDMA_OFFSET + 0x0C)
-+#define FE_TX_BASE_PTR0 (FE_PDMA_OFFSET + 0x10)
-+#define FE_TX_MAX_CNT0 (FE_PDMA_OFFSET + 0x14)
-+#define FE_TX_CTX_IDX0 (FE_PDMA_OFFSET + 0x18)
-+#define FE_TX_DTX_IDX0 (FE_PDMA_OFFSET + 0x1C)
-+#define FE_TX_BASE_PTR1 (FE_PDMA_OFFSET + 0x20)
-+#define FE_TX_MAX_CNT1 (FE_PDMA_OFFSET + 0x24)
-+#define FE_TX_CTX_IDX1 (FE_PDMA_OFFSET + 0x28)
-+#define FE_TX_DTX_IDX1 (FE_PDMA_OFFSET + 0x2C)
-+#define FE_RX_BASE_PTR0 (FE_PDMA_OFFSET + 0x30)
-+#define FE_RX_MAX_CNT0 (FE_PDMA_OFFSET + 0x34)
-+#define FE_RX_CALC_IDX0 (FE_PDMA_OFFSET + 0x38)
-+#define FE_RX_DRX_IDX0 (FE_PDMA_OFFSET + 0x3C)
-+#define FE_TX_BASE_PTR2 (FE_PDMA_OFFSET + 0x40)
-+#define FE_TX_MAX_CNT2 (FE_PDMA_OFFSET + 0x44)
-+#define FE_TX_CTX_IDX2 (FE_PDMA_OFFSET + 0x48)
-+#define FE_TX_DTX_IDX2 (FE_PDMA_OFFSET + 0x4C)
-+#define FE_TX_BASE_PTR3 (FE_PDMA_OFFSET + 0x50)
-+#define FE_TX_MAX_CNT3 (FE_PDMA_OFFSET + 0x54)
-+#define FE_TX_CTX_IDX3 (FE_PDMA_OFFSET + 0x58)
-+#define FE_TX_DTX_IDX3 (FE_PDMA_OFFSET + 0x5C)
-+#define FE_RX_BASE_PTR1 (FE_PDMA_OFFSET + 0x60)
-+#define FE_RX_MAX_CNT1 (FE_PDMA_OFFSET + 0x64)
-+#define FE_RX_CALC_IDX1 (FE_PDMA_OFFSET + 0x68)
-+#define FE_RX_DRX_IDX1 (FE_PDMA_OFFSET + 0x6C)
-+
-+/* Switch DMA configuration */
-+#define RT5350_SDM_CFG (RT5350_SDM_OFFSET + 0x00)
-+#define RT5350_SDM_RRING (RT5350_SDM_OFFSET + 0x04)
-+#define RT5350_SDM_TRING (RT5350_SDM_OFFSET + 0x08)
-+#define RT5350_SDM_MAC_ADRL (RT5350_SDM_OFFSET + 0x0C)
-+#define RT5350_SDM_MAC_ADRH (RT5350_SDM_OFFSET + 0x10)
-+#define RT5350_SDM_TPCNT (RT5350_SDM_OFFSET + 0x100)
-+#define RT5350_SDM_TBCNT (RT5350_SDM_OFFSET + 0x104)
-+#define RT5350_SDM_RPCNT (RT5350_SDM_OFFSET + 0x108)
-+#define RT5350_SDM_RBCNT (RT5350_SDM_OFFSET + 0x10C)
-+#define RT5350_SDM_CS_ERR (RT5350_SDM_OFFSET + 0x110)
-+
-+#define RT5350_SDM_ICS_EN BIT(16)
-+#define RT5350_SDM_TCS_EN BIT(17)
-+#define RT5350_SDM_UCS_EN BIT(18)
-+
-+/* MDIO_CFG register bits */
-+#define FE_MDIO_CFG_AUTO_POLL_EN BIT(29)
-+#define FE_MDIO_CFG_GP1_BP_EN BIT(16)
-+#define FE_MDIO_CFG_GP1_FRC_EN BIT(15)
-+#define FE_MDIO_CFG_GP1_SPEED_10 (0 << 13)
-+#define FE_MDIO_CFG_GP1_SPEED_100 (1 << 13)
-+#define FE_MDIO_CFG_GP1_SPEED_1000 (2 << 13)
-+#define FE_MDIO_CFG_GP1_DUPLEX BIT(12)
-+#define FE_MDIO_CFG_GP1_FC_TX BIT(11)
-+#define FE_MDIO_CFG_GP1_FC_RX BIT(10)
-+#define FE_MDIO_CFG_GP1_LNK_DWN BIT(9)
-+#define FE_MDIO_CFG_GP1_AN_FAIL BIT(8)
-+#define FE_MDIO_CFG_MDC_CLK_DIV_1 (0 << 6)
-+#define FE_MDIO_CFG_MDC_CLK_DIV_2 (1 << 6)
-+#define FE_MDIO_CFG_MDC_CLK_DIV_4 (2 << 6)
-+#define FE_MDIO_CFG_MDC_CLK_DIV_8 (3 << 6)
-+#define FE_MDIO_CFG_TURBO_MII_FREQ BIT(5)
-+#define FE_MDIO_CFG_TURBO_MII_MODE BIT(4)
-+#define FE_MDIO_CFG_RX_CLK_SKEW_0 (0 << 2)
-+#define FE_MDIO_CFG_RX_CLK_SKEW_200 (1 << 2)
-+#define FE_MDIO_CFG_RX_CLK_SKEW_400 (2 << 2)
-+#define FE_MDIO_CFG_RX_CLK_SKEW_INV (3 << 2)
-+#define FE_MDIO_CFG_TX_CLK_SKEW_0 0
-+#define FE_MDIO_CFG_TX_CLK_SKEW_200 1
-+#define FE_MDIO_CFG_TX_CLK_SKEW_400 2
-+#define FE_MDIO_CFG_TX_CLK_SKEW_INV 3
-+
-+/* uni-cast port */
-+#define FE_GDM1_JMB_LEN_MASK 0xf
-+#define FE_GDM1_JMB_LEN_SHIFT 28
-+#define FE_GDM1_ICS_EN BIT(22)
-+#define FE_GDM1_TCS_EN BIT(21)
-+#define FE_GDM1_UCS_EN BIT(20)
-+#define FE_GDM1_JMB_EN BIT(19)
-+#define FE_GDM1_STRPCRC BIT(16)
-+#define FE_GDM1_UFRC_P_CPU (0 << 12)
-+#define FE_GDM1_UFRC_P_GDMA1 (1 << 12)
-+#define FE_GDM1_UFRC_P_PPE (6 << 12)
-+
-+/* checksums */
-+#define FE_ICS_GEN_EN BIT(2)
-+#define FE_UCS_GEN_EN BIT(1)
-+#define FE_TCS_GEN_EN BIT(0)
-+
-+/* dma ring */
-+#define FE_PST_DRX_IDX0 BIT(16)
-+#define FE_PST_DTX_IDX3 BIT(3)
-+#define FE_PST_DTX_IDX2 BIT(2)
-+#define FE_PST_DTX_IDX1 BIT(1)
-+#define FE_PST_DTX_IDX0 BIT(0)
-+
-+#define FE_RX_2B_OFFSET BIT(31)
-+#define FE_TX_WB_DDONE BIT(6)
-+#define FE_RX_DMA_BUSY BIT(3)
-+#define FE_TX_DMA_BUSY BIT(1)
-+#define FE_RX_DMA_EN BIT(2)
-+#define FE_TX_DMA_EN BIT(0)
-+
-+#define FE_PDMA_SIZE_4DWORDS (0 << 4)
-+#define FE_PDMA_SIZE_8DWORDS (1 << 4)
-+#define FE_PDMA_SIZE_16DWORDS (2 << 4)
-+
-+#define FE_US_CYC_CNT_MASK 0xff
-+#define FE_US_CYC_CNT_SHIFT 0x8
-+#define FE_US_CYC_CNT_DIVISOR 1000000
-+
-+/* rxd2 */
-+#define RX_DMA_DONE BIT(31)
-+#define RX_DMA_LSO BIT(30)
-+#define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
-+#define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff)
-+#define RX_DMA_TAG BIT(15)
-+/* rxd3 */
-+#define RX_DMA_TPID(_x) (((_x) >> 16) & 0xffff)
-+#define RX_DMA_VID(_x) ((_x) & 0xffff)
-+/* rxd4 */
-+#define RX_DMA_L4VALID BIT(30)
-+
-+struct fe_rx_dma {
-+ unsigned int rxd1;
-+ unsigned int rxd2;
-+ unsigned int rxd3;
-+ unsigned int rxd4;
-+} __packed __aligned(4);
-+
-+#define TX_DMA_BUF_LEN 0x3fff
-+#define TX_DMA_PLEN0_MASK (TX_DMA_BUF_LEN << 16)
-+#define TX_DMA_PLEN0(_x) (((_x) & TX_DMA_BUF_LEN) << 16)
-+#define TX_DMA_PLEN1(_x) ((_x) & TX_DMA_BUF_LEN)
-+#define TX_DMA_GET_PLEN0(_x) (((_x) >> 16) & TX_DMA_BUF_LEN)
-+#define TX_DMA_GET_PLEN1(_x) ((_x) & TX_DMA_BUF_LEN)
-+#define TX_DMA_LS1 BIT(14)
-+#define TX_DMA_LS0 BIT(30)
-+#define TX_DMA_DONE BIT(31)
-+
-+#define TX_DMA_INS_VLAN_MT7621 BIT(16)
-+#define TX_DMA_INS_VLAN BIT(7)
-+#define TX_DMA_INS_PPPOE BIT(12)
-+#define TX_DMA_QN(_x) ((_x) << 16)
-+#define TX_DMA_PN(_x) ((_x) << 24)
-+#define TX_DMA_QN_MASK TX_DMA_QN(0x7)
-+#define TX_DMA_PN_MASK TX_DMA_PN(0x7)
-+#define TX_DMA_UDF BIT(20)
-+#define TX_DMA_CHKSUM (0x7 << 29)
-+#define TX_DMA_TSO BIT(28)
-+
-+/* frame engine counters */
-+#define FE_PPE_AC_BCNT0 (FE_CMTABLE_OFFSET + 0x00)
-+#define FE_GDMA1_TX_GBCNT (FE_CMTABLE_OFFSET + 0x300)
-+#define FE_GDMA2_TX_GBCNT (FE_GDMA1_TX_GBCNT + 0x40)
-+
-+/* phy device flags */
-+#define FE_PHY_FLAG_PORT BIT(0)
-+#define FE_PHY_FLAG_ATTACH BIT(1)
-+
-+struct fe_tx_dma {
-+ unsigned int txd1;
-+ unsigned int txd2;
-+ unsigned int txd3;
-+ unsigned int txd4;
-+} __packed __aligned(4);
-+
-+struct fe_priv;
-+
-+struct fe_phy {
-+ /* make sure that phy operations are atomic */
-+ spinlock_t lock;
-+
-+ struct phy_device *phy[8];
-+ struct device_node *phy_node[8];
-+ const __be32 *phy_fixed[8];
-+ int duplex[8];
-+ int speed[8];
-+ int tx_fc[8];
-+ int rx_fc[8];
-+ int (*connect)(struct fe_priv *priv);
-+ void (*disconnect)(struct fe_priv *priv);
-+ void (*start)(struct fe_priv *priv);
-+ void (*stop)(struct fe_priv *priv);
-+};
-+
-+struct fe_soc_data {
-+ const u16 *reg_table;
-+
-+ void (*init_data)(struct fe_soc_data *data, struct net_device *netdev);
-+ void (*reset_fe)(void);
-+ void (*set_mac)(struct fe_priv *priv, unsigned char *mac);
-+ int (*fwd_config)(struct fe_priv *priv);
-+ void (*tx_dma)(struct fe_tx_dma *txd);
-+ int (*switch_init)(struct fe_priv *priv);
-+ void (*port_init)(struct fe_priv *priv, struct device_node *port);
-+ int (*has_carrier)(struct fe_priv *priv);
-+ int (*mdio_init)(struct fe_priv *priv);
-+ void (*mdio_cleanup)(struct fe_priv *priv);
-+ int (*mdio_write)(struct mii_bus *bus, int phy_addr, int phy_reg,
-+ u16 val);
-+ int (*mdio_read)(struct mii_bus *bus, int phy_addr, int phy_reg);
-+ void (*mdio_adjust_link)(struct fe_priv *priv, int port);
-+
-+ void *swpriv;
-+ u32 pdma_glo_cfg;
-+ u32 rx_int;
-+ u32 tx_int;
-+ u32 status_int;
-+ u32 checksum_bit;
-+};
-+
-+#define FE_FLAG_PADDING_64B BIT(0)
-+#define FE_FLAG_PADDING_BUG BIT(1)
-+#define FE_FLAG_JUMBO_FRAME BIT(2)
-+#define FE_FLAG_RX_2B_OFFSET BIT(3)
-+#define FE_FLAG_RX_SG_DMA BIT(4)
-+#define FE_FLAG_RX_VLAN_CTAG BIT(5)
-+#define FE_FLAG_NAPI_WEIGHT BIT(6)
-+#define FE_FLAG_CALIBRATE_CLK BIT(7)
-+#define FE_FLAG_HAS_SWITCH BIT(8)
-+
-+#define FE_STAT_REG_DECLARE \
-+ _FE(tx_bytes) \
-+ _FE(tx_packets) \
-+ _FE(tx_skip) \
-+ _FE(tx_collisions) \
-+ _FE(rx_bytes) \
-+ _FE(rx_packets) \
-+ _FE(rx_overflow) \
-+ _FE(rx_fcs_errors) \
-+ _FE(rx_short_errors) \
-+ _FE(rx_long_errors) \
-+ _FE(rx_checksum_errors) \
-+ _FE(rx_flow_control_packets)
-+
-+struct fe_hw_stats {
-+ /* make sure that stats operations are atomic */
-+ spinlock_t stats_lock;
-+
-+ struct u64_stats_sync syncp;
-+#define _FE(x) u64 x;
-+ FE_STAT_REG_DECLARE
-+#undef _FE
-+};
-+
-+enum fe_tx_flags {
-+ FE_TX_FLAGS_SINGLE0 = 0x01,
-+ FE_TX_FLAGS_PAGE0 = 0x02,
-+ FE_TX_FLAGS_PAGE1 = 0x04,
-+};
-+
-+struct fe_tx_buf {
-+ struct sk_buff *skb;
-+ u32 flags;
-+ DEFINE_DMA_UNMAP_ADDR(dma_addr0);
-+ DEFINE_DMA_UNMAP_LEN(dma_len0);
-+ DEFINE_DMA_UNMAP_ADDR(dma_addr1);
-+ DEFINE_DMA_UNMAP_LEN(dma_len1);
-+};
-+
-+struct fe_tx_ring {
-+ struct fe_tx_dma *tx_dma;
-+ struct fe_tx_buf *tx_buf;
-+ dma_addr_t tx_phys;
-+ u16 tx_ring_size;
-+ u16 tx_free_idx;
-+ u16 tx_next_idx;
-+ u16 tx_thresh;
-+};
-+
-+struct fe_rx_ring {
-+ struct fe_rx_dma *rx_dma;
-+ u8 **rx_data;
-+ dma_addr_t rx_phys;
-+ u16 rx_ring_size;
-+ u16 frag_size;
-+ u16 rx_buf_size;
-+ u16 rx_calc_idx;
-+};
-+
-+struct fe_priv {
-+ /* make sure that register operations are atomic */
-+ spinlock_t page_lock;
-+
-+ struct fe_soc_data *soc;
-+ struct net_device *netdev;
-+ struct device_node *switch_np;
-+ u32 msg_enable;
-+ u32 flags;
-+
-+ struct device *device;
-+ unsigned long sysclk;
-+
-+ struct fe_rx_ring rx_ring;
-+ struct napi_struct rx_napi;
-+
-+ struct fe_tx_ring tx_ring;
-+
-+ struct fe_phy *phy;
-+ struct mii_bus *mii_bus;
-+ struct phy_device *phy_dev;
-+ u32 phy_flags;
-+
-+ int link[8];
-+
-+ struct fe_hw_stats *hw_stats;
-+ unsigned long vlan_map;
-+ struct work_struct pending_work;
-+ DECLARE_BITMAP(pending_flags, FE_FLAG_MAX);
-+};
-+
-+extern const struct of_device_id of_fe_match[];
-+
-+void fe_w32(u32 val, unsigned reg);
-+u32 fe_r32(unsigned reg);
-+
-+int fe_set_clock_cycle(struct fe_priv *priv);
-+void fe_csum_config(struct fe_priv *priv);
-+void fe_stats_update(struct fe_priv *priv);
-+void fe_fwd_config(struct fe_priv *priv);
-+void fe_reg_w32(u32 val, enum fe_reg reg);
-+u32 fe_reg_r32(enum fe_reg reg);
-+
-+void fe_reset(u32 reset_bits);
-+
-+static inline void *priv_netdev(struct fe_priv *priv)
-+{
-+ return (char *)priv - ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
-+}
-+
-+#endif /* FE_ETH_H */
diff --git a/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch b/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch
deleted file mode 100644
index 675888f980..0000000000
--- a/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch
+++ /dev/null
@@ -1,691 +0,0 @@
-From 2c39ddc83452c34fedc86261ed1f96d7537adfd1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 21:28:10 +0100
-Subject: [PATCH 502/513] net-next: mediatek: add switch driver for rt3050
-
-This driver is very basic and only provides basic init and irq support.
-Switchdev support for this device will follow.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/mediatek/esw_rt3050.c | 640 ++++++++++++++++++++++++++++
- drivers/net/ethernet/mediatek/esw_rt3050.h | 29 ++
- 2 files changed, 669 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.c
- create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.h
-
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
-@@ -0,0 +1,640 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/skbuff.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+
-+#include <linux/ioport.h>
-+#include <linux/mii.h>
-+
-+#include <ralink_regs.h>
-+
-+/* HW limitations for this switch:
-+ * - No large frame support (PKT_MAX_LEN at most 1536)
-+ * - Can't have untagged vlan and tagged vlan on one port at the same time,
-+ * though this might be possible using the undocumented PPE.
-+ */
-+
-+#define RT305X_ESW_REG_ISR 0x00
-+#define RT305X_ESW_REG_IMR 0x04
-+#define RT305X_ESW_REG_FCT0 0x08
-+#define RT305X_ESW_REG_PFC1 0x14
-+#define RT305X_ESW_REG_ATS 0x24
-+#define RT305X_ESW_REG_ATS0 0x28
-+#define RT305X_ESW_REG_ATS1 0x2c
-+#define RT305X_ESW_REG_ATS2 0x30
-+#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n))
-+#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n))
-+#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n))
-+#define RT305X_ESW_REG_POA 0x80
-+#define RT305X_ESW_REG_FPA 0x84
-+#define RT305X_ESW_REG_SOCPC 0x8c
-+#define RT305X_ESW_REG_POC0 0x90
-+#define RT305X_ESW_REG_POC1 0x94
-+#define RT305X_ESW_REG_POC2 0x98
-+#define RT305X_ESW_REG_SGC 0x9c
-+#define RT305X_ESW_REG_STRT 0xa0
-+#define RT305X_ESW_REG_PCR0 0xc0
-+#define RT305X_ESW_REG_PCR1 0xc4
-+#define RT305X_ESW_REG_FPA2 0xc8
-+#define RT305X_ESW_REG_FCT2 0xcc
-+#define RT305X_ESW_REG_SGC2 0xe4
-+#define RT305X_ESW_REG_P0LED 0xa4
-+#define RT305X_ESW_REG_P1LED 0xa8
-+#define RT305X_ESW_REG_P2LED 0xac
-+#define RT305X_ESW_REG_P3LED 0xb0
-+#define RT305X_ESW_REG_P4LED 0xb4
-+#define RT305X_ESW_REG_PXPC(_x) (0xe8 + (4 * _x))
-+#define RT305X_ESW_REG_P1PC 0xec
-+#define RT305X_ESW_REG_P2PC 0xf0
-+#define RT305X_ESW_REG_P3PC 0xf4
-+#define RT305X_ESW_REG_P4PC 0xf8
-+#define RT305X_ESW_REG_P5PC 0xfc
-+
-+#define RT305X_ESW_LED_LINK 0
-+#define RT305X_ESW_LED_100M 1
-+#define RT305X_ESW_LED_DUPLEX 2
-+#define RT305X_ESW_LED_ACTIVITY 3
-+#define RT305X_ESW_LED_COLLISION 4
-+#define RT305X_ESW_LED_LINKACT 5
-+#define RT305X_ESW_LED_DUPLCOLL 6
-+#define RT305X_ESW_LED_10MACT 7
-+#define RT305X_ESW_LED_100MACT 8
-+/* Additional led states not in datasheet: */
-+#define RT305X_ESW_LED_BLINK 10
-+#define RT305X_ESW_LED_ON 12
-+
-+#define RT305X_ESW_LINK_S 25
-+#define RT305X_ESW_DUPLEX_S 9
-+#define RT305X_ESW_SPD_S 0
-+
-+#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16
-+#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13)
-+#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8
-+
-+#define RT305X_ESW_PCR1_WT_DONE BIT(0)
-+
-+#define RT305X_ESW_ATS_TIMEOUT (5 * HZ)
-+#define RT305X_ESW_PHY_TIMEOUT (5 * HZ)
-+
-+#define RT305X_ESW_PVIDC_PVID_M 0xfff
-+#define RT305X_ESW_PVIDC_PVID_S 12
-+
-+#define RT305X_ESW_VLANI_VID_M 0xfff
-+#define RT305X_ESW_VLANI_VID_S 12
-+
-+#define RT305X_ESW_VMSC_MSC_M 0xff
-+#define RT305X_ESW_VMSC_MSC_S 8
-+
-+#define RT305X_ESW_SOCPC_DISUN2CPU_S 0
-+#define RT305X_ESW_SOCPC_DISMC2CPU_S 8
-+#define RT305X_ESW_SOCPC_DISBC2CPU_S 16
-+#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25)
-+
-+#define RT305X_ESW_POC0_EN_BP_S 0
-+#define RT305X_ESW_POC0_EN_FC_S 8
-+#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16
-+#define RT305X_ESW_POC0_DIS_PORT_M 0x7f
-+#define RT305X_ESW_POC0_DIS_PORT_S 23
-+
-+#define RT305X_ESW_POC2_UNTAG_EN_M 0xff
-+#define RT305X_ESW_POC2_UNTAG_EN_S 0
-+#define RT305X_ESW_POC2_ENAGING_S 8
-+#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16
-+
-+#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f
-+#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0
-+#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f
-+#define RT305X_ESW_SGC2_LAN_PMAP_S 24
-+
-+#define RT305X_ESW_PFC1_EN_VLAN_M 0xff
-+#define RT305X_ESW_PFC1_EN_VLAN_S 16
-+#define RT305X_ESW_PFC1_EN_TOS_S 24
-+
-+#define RT305X_ESW_VLAN_NONE 0xfff
-+
-+#define RT305X_ESW_GSC_BC_STROM_MASK 0x3
-+#define RT305X_ESW_GSC_BC_STROM_SHIFT 4
-+
-+#define RT305X_ESW_GSC_LED_FREQ_MASK 0x3
-+#define RT305X_ESW_GSC_LED_FREQ_SHIFT 23
-+
-+#define RT305X_ESW_POA_LINK_MASK 0x1f
-+#define RT305X_ESW_POA_LINK_SHIFT 25
-+
-+#define RT305X_ESW_PORT_ST_CHG BIT(26)
-+#define RT305X_ESW_PORT0 0
-+#define RT305X_ESW_PORT1 1
-+#define RT305X_ESW_PORT2 2
-+#define RT305X_ESW_PORT3 3
-+#define RT305X_ESW_PORT4 4
-+#define RT305X_ESW_PORT5 5
-+#define RT305X_ESW_PORT6 6
-+
-+#define RT305X_ESW_PMAP_LLLLLL 0x3f
-+#define RT305X_ESW_PMAP_LLLLWL 0x2f
-+#define RT305X_ESW_PMAP_WLLLLL 0x3e
-+
-+#define RT305X_ESW_PORTS_INTERNAL \
-+ (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \
-+ BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \
-+ BIT(RT305X_ESW_PORT4))
-+
-+#define RT305X_ESW_PORTS_NOCPU \
-+ (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
-+
-+#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6)
-+
-+#define RT305X_ESW_PORTS_ALL \
-+ (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
-+
-+#define RT305X_ESW_NUM_PORTS 7
-+#define RT305X_ESW_NUM_LEDS 5
-+
-+#define RT5350_EWS_REG_LED_POLARITY 0x168
-+#define RT5350_RESET_EPHY BIT(24)
-+
-+struct esw_port {
-+ bool disable;
-+ u8 led;
-+};
-+
-+struct rt305x_esw {
-+ struct device *dev;
-+ void __iomem *base;
-+ int irq;
-+
-+ /* Protects against concurrent register r/w operations. */
-+ spinlock_t reg_rw_lock;
-+
-+ unsigned char port_map;
-+ unsigned int reg_led_polarity;
-+
-+ struct esw_port ports[RT305X_ESW_NUM_PORTS];
-+
-+};
-+
-+static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
-+{
-+ __raw_writel(val, esw->base + reg);
-+}
-+
-+static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
-+{
-+ return __raw_readl(esw->base + reg);
-+}
-+
-+static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg,
-+ unsigned long mask, unsigned long val)
-+{
-+ unsigned long t;
-+
-+ t = __raw_readl(esw->base + reg) & ~mask;
-+ __raw_writel(t | val, esw->base + reg);
-+}
-+
-+static void esw_rmw(struct rt305x_esw *esw, unsigned reg,
-+ unsigned long mask, unsigned long val)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&esw->reg_rw_lock, flags);
-+ esw_rmw_raw(esw, reg, mask, val);
-+ spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
-+}
-+
-+static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr,
-+ u32 phy_register, u32 write_data)
-+{
-+ unsigned long t_start = jiffies;
-+ int ret = 0;
-+
-+ while (1) {
-+ if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
-+ RT305X_ESW_PCR1_WT_DONE))
-+ break;
-+ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
-+ ret = 1;
-+ goto out;
-+ }
-+ }
-+
-+ write_data &= 0xffff;
-+ esw_w32(esw, (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
-+ (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
-+ (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
-+ RT305X_ESW_REG_PCR0);
-+
-+ t_start = jiffies;
-+ while (1) {
-+ if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
-+ RT305X_ESW_PCR1_WT_DONE)
-+ break;
-+
-+ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
-+ ret = 1;
-+ break;
-+ }
-+ }
-+out:
-+ if (ret)
-+ dev_err(esw->dev, "ramips_eth: MDIO timeout\n");
-+ return ret;
-+}
-+
-+static unsigned esw_get_port_disable(struct rt305x_esw *esw)
-+{
-+ unsigned reg;
-+
-+ reg = esw_r32(esw, RT305X_ESW_REG_POC0);
-+ return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
-+ RT305X_ESW_POC0_DIS_PORT_M;
-+}
-+
-+static void esw_hw_init(struct rt305x_esw *esw)
-+{
-+ int i;
-+ u8 port_disable = 0;
-+ u8 port_map = RT305X_ESW_PMAP_LLLLLL;
-+
-+ /* vodoo from original driver */
-+ esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
-+ esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
-+ /* Port priority 1 for all ports, vlan enabled. */
-+ esw_w32(esw, 0x00005555 |
-+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
-+ RT305X_ESW_REG_PFC1);
-+
-+ /* Enable Back Pressure, and Flow Control */
-+ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
-+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
-+ RT305X_ESW_REG_POC0);
-+
-+ /* Enable Aging, and VLAN TAG removal */
-+ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
-+ (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
-+ RT305X_ESW_REG_POC2);
-+
-+ esw_w32(esw, 0x00d6500c, RT305X_ESW_REG_FCT2);
-+
-+ /* 300s aging timer, max packet len 1536, broadcast storm prevention
-+ * disabled, disable collision abort, mac xor48 hash, 10 packet back
-+ * pressure jam, GMII disable was_transmit, back pressure disabled,
-+ * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
-+ * ports.
-+ */
-+ esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
-+
-+ /* Setup SoC Port control register */
-+ esw_w32(esw,
-+ (RT305X_ESW_SOCPC_CRC_PADDING |
-+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
-+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
-+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
-+ RT305X_ESW_REG_SOCPC);
-+
-+ /* ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
-+ * turbo mii off, rgmi 3.3v off
-+ * port5: disabled
-+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
-+ */
-+ esw_w32(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
-+ esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
-+
-+ /* Force Link/Activity on ports */
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
-+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
-+
-+ /* Copy disabled port configuration from bootloader setup */
-+ port_disable = esw_get_port_disable(esw);
-+ for (i = 0; i < 6; i++)
-+ esw->ports[i].disable = (port_disable & (1 << i)) != 0;
-+
-+ if (ralink_soc == RT305X_SOC_RT3352) {
-+ /* reset EPHY */
-+ fe_reset(RT5350_RESET_EPHY);
-+
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ for (i = 0; i < 5; i++) {
-+ if (esw->ports[i].disable) {
-+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
-+ } else {
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_FULLDPLX |
-+ BMCR_ANENABLE |
-+ BMCR_SPEED100);
-+ }
-+ /* TX10 waveform coefficient LSB=0 disable PHY */
-+ rt305x_mii_write(esw, i, 26, 0x1601);
-+ /* TX100/TX10 AD/DA current bias */
-+ rt305x_mii_write(esw, i, 29, 0x7016);
-+ /* TX100 slew rate control */
-+ rt305x_mii_write(esw, i, 30, 0x0038);
-+ }
-+
-+ /* select global register */
-+ rt305x_mii_write(esw, 0, 31, 0x0);
-+ /* enlarge agcsel threshold 3 and threshold 2 */
-+ rt305x_mii_write(esw, 0, 1, 0x4a40);
-+ /* enlarge agcsel threshold 5 and threshold 4 */
-+ rt305x_mii_write(esw, 0, 2, 0x6254);
-+ /* enlarge agcsel threshold */
-+ rt305x_mii_write(esw, 0, 3, 0xa17f);
-+ rt305x_mii_write(esw, 0, 12, 0x7eaa);
-+ /* longer TP_IDL tail length */
-+ rt305x_mii_write(esw, 0, 14, 0x65);
-+ /* increased squelch pulse count threshold. */
-+ rt305x_mii_write(esw, 0, 16, 0x0684);
-+ /* set TX10 signal amplitude threshold to minimum */
-+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
-+ /* set squelch amplitude to higher threshold */
-+ rt305x_mii_write(esw, 0, 18, 0x40ba);
-+ /* tune TP_IDL tail and head waveform, enable power
-+ * down slew rate control
-+ */
-+ rt305x_mii_write(esw, 0, 22, 0x253f);
-+ /* set PLL/Receive bias current are calibrated */
-+ rt305x_mii_write(esw, 0, 27, 0x2fda);
-+ /* change PLL/Receive bias current to internal(RT3350) */
-+ rt305x_mii_write(esw, 0, 28, 0xc410);
-+ /* change PLL bias current to internal(RT3052_MP3) */
-+ rt305x_mii_write(esw, 0, 29, 0x598b);
-+ /* select local register */
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ } else if (ralink_soc == RT305X_SOC_RT5350) {
-+ /* reset EPHY */
-+ fe_reset(RT5350_RESET_EPHY);
-+
-+ /* set the led polarity */
-+ esw_w32(esw, esw->reg_led_polarity & 0x1F,
-+ RT5350_EWS_REG_LED_POLARITY);
-+
-+ /* local registers */
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ for (i = 0; i < 5; i++) {
-+ if (esw->ports[i].disable) {
-+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
-+ } else {
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_FULLDPLX |
-+ BMCR_ANENABLE |
-+ BMCR_SPEED100);
-+ }
-+ /* TX10 waveform coefficient LSB=0 disable PHY */
-+ rt305x_mii_write(esw, i, 26, 0x1601);
-+ /* TX100/TX10 AD/DA current bias */
-+ rt305x_mii_write(esw, i, 29, 0x7015);
-+ /* TX100 slew rate control */
-+ rt305x_mii_write(esw, i, 30, 0x0038);
-+ }
-+
-+ /* global registers */
-+ rt305x_mii_write(esw, 0, 31, 0x0);
-+ /* enlarge agcsel threshold 3 and threshold 2 */
-+ rt305x_mii_write(esw, 0, 1, 0x4a40);
-+ /* enlarge agcsel threshold 5 and threshold 4 */
-+ rt305x_mii_write(esw, 0, 2, 0x6254);
-+ /* enlarge agcsel threshold 6 */
-+ rt305x_mii_write(esw, 0, 3, 0xa17f);
-+ rt305x_mii_write(esw, 0, 12, 0x7eaa);
-+ /* longer TP_IDL tail length */
-+ rt305x_mii_write(esw, 0, 14, 0x65);
-+ /* increased squelch pulse count threshold. */
-+ rt305x_mii_write(esw, 0, 16, 0x0684);
-+ /* set TX10 signal amplitude threshold to minimum */
-+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
-+ /* set squelch amplitude to higher threshold */
-+ rt305x_mii_write(esw, 0, 18, 0x40ba);
-+ /* tune TP_IDL tail and head waveform, enable power
-+ * down slew rate control
-+ */
-+ rt305x_mii_write(esw, 0, 22, 0x253f);
-+ /* set PLL/Receive bias current are calibrated */
-+ rt305x_mii_write(esw, 0, 27, 0x2fda);
-+ /* change PLL/Receive bias current to internal(RT3350) */
-+ rt305x_mii_write(esw, 0, 28, 0xc410);
-+ /* change PLL bias current to internal(RT3052_MP3) */
-+ rt305x_mii_write(esw, 0, 29, 0x598b);
-+ /* select local register */
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ } else if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
-+ int i;
-+
-+ /* reset EPHY */
-+ fe_reset(RT5350_RESET_EPHY);
-+
-+ rt305x_mii_write(esw, 0, 31, 0x2000); /* change G2 page */
-+ rt305x_mii_write(esw, 0, 26, 0x0020);
-+
-+ for (i = 0; i < 5; i++) {
-+ rt305x_mii_write(esw, i, 31, 0x8000);
-+ rt305x_mii_write(esw, i, 0, 0x3100);
-+ rt305x_mii_write(esw, i, 30, 0xa000);
-+ rt305x_mii_write(esw, i, 31, 0xa000);
-+ rt305x_mii_write(esw, i, 16, 0x0606);
-+ rt305x_mii_write(esw, i, 23, 0x0f0e);
-+ rt305x_mii_write(esw, i, 24, 0x1610);
-+ rt305x_mii_write(esw, i, 30, 0x1f15);
-+ rt305x_mii_write(esw, i, 28, 0x6111);
-+ rt305x_mii_write(esw, i, 31, 0x2000);
-+ rt305x_mii_write(esw, i, 26, 0x0000);
-+ }
-+
-+ /* 100Base AOI setting */
-+ rt305x_mii_write(esw, 0, 31, 0x5000);
-+ rt305x_mii_write(esw, 0, 19, 0x004a);
-+ rt305x_mii_write(esw, 0, 20, 0x015a);
-+ rt305x_mii_write(esw, 0, 21, 0x00ee);
-+ rt305x_mii_write(esw, 0, 22, 0x0033);
-+ rt305x_mii_write(esw, 0, 23, 0x020a);
-+ rt305x_mii_write(esw, 0, 24, 0x0000);
-+ rt305x_mii_write(esw, 0, 25, 0x024a);
-+ rt305x_mii_write(esw, 0, 26, 0x035a);
-+ rt305x_mii_write(esw, 0, 27, 0x02ee);
-+ rt305x_mii_write(esw, 0, 28, 0x0233);
-+ rt305x_mii_write(esw, 0, 29, 0x000a);
-+ rt305x_mii_write(esw, 0, 30, 0x0000);
-+ } else {
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ for (i = 0; i < 5; i++) {
-+ if (esw->ports[i].disable) {
-+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
-+ } else {
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_FULLDPLX |
-+ BMCR_ANENABLE |
-+ BMCR_SPEED100);
-+ }
-+ /* TX10 waveform coefficient */
-+ rt305x_mii_write(esw, i, 26, 0x1601);
-+ /* TX100/TX10 AD/DA current bias */
-+ rt305x_mii_write(esw, i, 29, 0x7058);
-+ /* TX100 slew rate control */
-+ rt305x_mii_write(esw, i, 30, 0x0018);
-+ }
-+
-+ /* PHY IOT */
-+ /* select global register */
-+ rt305x_mii_write(esw, 0, 31, 0x0);
-+ /* tune TP_IDL tail and head waveform */
-+ rt305x_mii_write(esw, 0, 22, 0x052f);
-+ /* set TX10 signal amplitude threshold to minimum */
-+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
-+ /* set squelch amplitude to higher threshold */
-+ rt305x_mii_write(esw, 0, 18, 0x40ba);
-+ /* longer TP_IDL tail length */
-+ rt305x_mii_write(esw, 0, 14, 0x65);
-+ /* select local register */
-+ rt305x_mii_write(esw, 0, 31, 0x8000);
-+ }
-+
-+ if (esw->port_map)
-+ port_map = esw->port_map;
-+ else
-+ port_map = RT305X_ESW_PMAP_LLLLLL;
-+
-+ /* Unused HW feature, but still nice to be consistent here...
-+ * This is also exported to userspace ('lan' attribute) so it's
-+ * conveniently usable to decide which ports go into the wan vlan by
-+ * default.
-+ */
-+ esw_rmw(esw, RT305X_ESW_REG_SGC2,
-+ RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
-+ port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
-+
-+ /* make the switch leds blink */
-+ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
-+ esw->ports[i].led = 0x05;
-+
-+ /* Only unmask the port change interrupt */
-+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
-+}
-+
-+static irqreturn_t esw_interrupt(int irq, void *_esw)
-+{
-+ struct rt305x_esw *esw = (struct rt305x_esw *)_esw;
-+ u32 status;
-+
-+ status = esw_r32(esw, RT305X_ESW_REG_ISR);
-+ if (status & RT305X_ESW_PORT_ST_CHG) {
-+ u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
-+
-+ link >>= RT305X_ESW_POA_LINK_SHIFT;
-+ link &= RT305X_ESW_POA_LINK_MASK;
-+ dev_info(esw->dev, "link changed 0x%02X\n", link);
-+ }
-+ esw_w32(esw, status, RT305X_ESW_REG_ISR);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int esw_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(p, IORESOURCE_MEM, 0);
-+ struct device_node *np = pdev->dev.of_node;
-+ const __be32 *port_map, *reg_init;
-+ struct rt305x_esw *esw;
-+ struct resource *irq;
-+ int ret;
-+
-+ esw = devm_kzalloc(&pdev->dev, sizeof(*esw), GFP_KERNEL);
-+ if (!esw)
-+ return -ENOMEM;
-+
-+ esw->dev = &pdev->dev;
-+ esw->irq = irq->start;
-+ esw->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (!esw->base)
-+ return -EADDRNOTAVAIL;
-+
-+ port_map = of_get_property(np, "mediatek,portmap", NULL);
-+ if (port_map)
-+ esw->port_map = be32_to_cpu(*port_map);
-+
-+ reg_init = of_get_property(np, "mediatek,led_polarity", NULL);
-+ if (reg_init)
-+ esw->reg_led_polarity = be32_to_cpu(*reg_init);
-+
-+ platform_set_drvdata(pdev, esw);
-+
-+ spin_lock_init(&esw->reg_rw_lock);
-+
-+ esw_hw_init(esw);
-+
-+ ret = devm_request_irq(&pdev->dev, esw->irq, esw_interrupt, 0, "esw",
-+ esw);
-+
-+ if (!ret) {
-+ esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
-+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
-+ }
-+
-+ return ret;
-+}
-+
-+static int esw_remove(struct platform_device *pdev)
-+{
-+ struct rt305x_esw *esw = platform_get_drvdata(pdev);
-+
-+ if (esw) {
-+ esw_w32(esw, ~0, RT305X_ESW_REG_IMR);
-+ platform_set_drvdata(pdev, NULL);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id ralink_esw_match[] = {
-+ { .compatible = "ralink,rt3050-esw" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ralink_esw_match);
-+
-+static struct platform_driver esw_driver = {
-+ .probe = esw_probe,
-+ .remove = esw_remove,
-+ .driver = {
-+ .name = "rt3050-esw",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ralink_esw_match,
-+ },
-+};
-+
-+int __init mtk_switch_init(void)
-+{
-+ return platform_driver_register(&esw_driver);
-+}
-+
-+void mtk_switch_exit(void)
-+{
-+ platform_driver_unregister(&esw_driver);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/esw_rt3050.h
-@@ -0,0 +1,29 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#ifndef _RALINK_ESW_RT3052_H__
-+#define _RALINK_ESW_RT3052_H__
-+
-+#ifdef CONFIG_NET_MEDIATEK_ESW_RT3052
-+
-+int __init mtk_switch_init(void);
-+void mtk_switch_exit(void);
-+
-+#else
-+
-+static inline int __init mtk_switch_init(void) { return 0; }
-+static inline void mtk_switch_exit(void) { }
-+
-+#endif
-+#endif
diff --git a/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch b/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch
deleted file mode 100644
index f3905ede44..0000000000
--- a/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch
+++ /dev/null
@@ -1,394 +0,0 @@
-From 322a9598692943961791ac6e5a3f385b379dcdc3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 21:23:18 +0100
-Subject: [PATCH 503/513] net-next: mediatek: add switch driver for mt7620
-
-This driver is very basic and only provides basic init and irq support.
-Switchdev support for this device will follow.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/mediatek/gsw_mt7620.c | 255 ++++++++++++++++++++++++++++
- drivers/net/ethernet/mediatek/gsw_mt7620.h | 117 +++++++++++++
- 2 files changed, 372 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7620.c
- create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7620.h
-
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/gsw_mt7620.c
-@@ -0,0 +1,255 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_device.h>
-+#include <linux/of_irq.h>
-+
-+#include <ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "gsw_mt7620.h"
-+
-+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
-+{
-+ iowrite32(val, gsw->base + reg);
-+}
-+
-+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg)
-+{
-+ return ioread32(gsw->base + reg);
-+}
-+
-+static irqreturn_t gsw_interrupt_mt7620(int irq, void *_priv)
-+{
-+ struct fe_priv *priv = (struct fe_priv *)_priv;
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
-+ u32 status;
-+ int i, max = (gsw->port4 == PORT4_EPHY) ? (4) : (3);
-+
-+ status = mtk_switch_r32(gsw, GSW_REG_ISR);
-+ if (status & PORT_IRQ_ST_CHG)
-+ for (i = 0; i <= max; i++) {
-+ u32 status = mtk_switch_r32(gsw, GSW_REG_PORT_STATUS(i));
-+ int link = status & 0x1;
-+
-+ if (link != priv->link[i])
-+ mt7620_print_link_state(priv, i, link,
-+ (status >> 2) & 3,
-+ (status & 0x2));
-+
-+ priv->link[i] = link;
-+ }
-+ mtk_switch_w32(gsw, status, GSW_REG_ISR);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void mt7620_hw_init(struct mt7620_gsw *gsw, struct device_node *np)
-+{
-+ u32 is_BGA = (rt_sysc_r32(0x0c) >> 16) & 1;
-+
-+ rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1);
-+ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR);
-+
-+ if (of_property_read_bool(np, "mediatek,mt7530")) {
-+ u32 val;
-+
-+ /* turn off ephy and set phy base addr to 12 */
-+ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_GPC1) |
-+ (0x1f << 24) | (0xc << 16),
-+ GSW_REG_GPC1);
-+
-+ /* set MT7530 central align */
-+ val = mt7530_mdio_r32(gsw, 0x7830);
-+ val &= ~BIT(0);
-+ val |= BIT(1);
-+ mt7530_mdio_w32(gsw, 0x7830, val);
-+
-+ val = mt7530_mdio_r32(gsw, 0x7a40);
-+ val &= ~BIT(30);
-+ mt7530_mdio_w32(gsw, 0x7a40, val);
-+
-+ mt7530_mdio_w32(gsw, 0x7a78, 0x855);
-+ } else {
-+ /* global page 4 */
-+ _mt7620_mii_write(gsw, 1, 31, 0x4000);
-+
-+ _mt7620_mii_write(gsw, 1, 17, 0x7444);
-+ if (is_BGA)
-+ _mt7620_mii_write(gsw, 1, 19, 0x0114);
-+ else
-+ _mt7620_mii_write(gsw, 1, 19, 0x0117);
-+
-+ _mt7620_mii_write(gsw, 1, 22, 0x10cf);
-+ _mt7620_mii_write(gsw, 1, 25, 0x6212);
-+ _mt7620_mii_write(gsw, 1, 26, 0x0777);
-+ _mt7620_mii_write(gsw, 1, 29, 0x4000);
-+ _mt7620_mii_write(gsw, 1, 28, 0xc077);
-+ _mt7620_mii_write(gsw, 1, 24, 0x0000);
-+
-+ /* global page 3 */
-+ _mt7620_mii_write(gsw, 1, 31, 0x3000);
-+ _mt7620_mii_write(gsw, 1, 17, 0x4838);
-+
-+ /* global page 2 */
-+ _mt7620_mii_write(gsw, 1, 31, 0x2000);
-+ if (is_BGA) {
-+ _mt7620_mii_write(gsw, 1, 21, 0x0515);
-+ _mt7620_mii_write(gsw, 1, 22, 0x0053);
-+ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
-+ _mt7620_mii_write(gsw, 1, 24, 0x0aaf);
-+ _mt7620_mii_write(gsw, 1, 25, 0x0fad);
-+ _mt7620_mii_write(gsw, 1, 26, 0x0fc1);
-+ } else {
-+ _mt7620_mii_write(gsw, 1, 21, 0x0517);
-+ _mt7620_mii_write(gsw, 1, 22, 0x0fd2);
-+ _mt7620_mii_write(gsw, 1, 23, 0x00bf);
-+ _mt7620_mii_write(gsw, 1, 24, 0x0aab);
-+ _mt7620_mii_write(gsw, 1, 25, 0x00ae);
-+ _mt7620_mii_write(gsw, 1, 26, 0x0fff);
-+ }
-+ /* global page 1 */
-+ _mt7620_mii_write(gsw, 1, 31, 0x1000);
-+ _mt7620_mii_write(gsw, 1, 17, 0xe7f8);
-+ }
-+
-+ /* global page 0 */
-+ _mt7620_mii_write(gsw, 1, 31, 0x8000);
-+ _mt7620_mii_write(gsw, 0, 30, 0xa000);
-+ _mt7620_mii_write(gsw, 1, 30, 0xa000);
-+ _mt7620_mii_write(gsw, 2, 30, 0xa000);
-+ _mt7620_mii_write(gsw, 3, 30, 0xa000);
-+
-+ _mt7620_mii_write(gsw, 0, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 1, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 2, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 3, 4, 0x05e1);
-+
-+ /* global page 2 */
-+ _mt7620_mii_write(gsw, 1, 31, 0xa000);
-+ _mt7620_mii_write(gsw, 0, 16, 0x1111);
-+ _mt7620_mii_write(gsw, 1, 16, 0x1010);
-+ _mt7620_mii_write(gsw, 2, 16, 0x1515);
-+ _mt7620_mii_write(gsw, 3, 16, 0x0f0f);
-+
-+ /* CPU Port6 Force Link 1G, FC ON */
-+ mtk_switch_w32(gsw, 0x5e33b, GSW_REG_PORT_PMCR(6));
-+
-+ /* Set Port 6 as CPU Port */
-+ mtk_switch_w32(gsw, 0x7f7f7fe0, 0x0010);
-+
-+ /* setup port 4 */
-+ if (gsw->port4 == PORT4_EPHY) {
-+ u32 val = rt_sysc_r32(SYSC_REG_CFG1);
-+
-+ val |= 3 << 14;
-+ rt_sysc_w32(val, SYSC_REG_CFG1);
-+ _mt7620_mii_write(gsw, 4, 30, 0xa000);
-+ _mt7620_mii_write(gsw, 4, 4, 0x05e1);
-+ _mt7620_mii_write(gsw, 4, 16, 0x1313);
-+ pr_info("gsw: setting port4 to ephy mode\n");
-+ }
-+}
-+
-+static const struct of_device_id mediatek_gsw_match[] = {
-+ { .compatible = "mediatek,mt7620-gsw" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mediatek_gsw_match);
-+
-+int mtk_gsw_init(struct fe_priv *priv)
-+{
-+ struct device_node *np = priv->switch_np;
-+ struct platform_device *pdev = of_find_device_by_node(np);
-+ struct mt7620_gsw *gsw;
-+
-+ if (!pdev)
-+ return -ENODEV;
-+
-+ if (!of_device_is_compatible(np, mediatek_gsw_match->compatible))
-+ return -EINVAL;
-+
-+ gsw = platform_get_drvdata(pdev);
-+ priv->soc->swpriv = gsw;
-+
-+ mt7620_hw_init(gsw, np);
-+
-+ if (gsw->irq) {
-+ request_irq(gsw->irq, gsw_interrupt_mt7620, 0,
-+ "gsw", priv);
-+ mtk_switch_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7620_gsw_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const char *port4 = NULL;
-+ struct mt7620_gsw *gsw;
-+ struct device_node *np = pdev->dev.of_node;
-+
-+ gsw = devm_kzalloc(&pdev->dev, sizeof(struct mt7620_gsw), GFP_KERNEL);
-+ if (!gsw)
-+ return -ENOMEM;
-+
-+ gsw->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (!gsw->base)
-+ return -EADDRNOTAVAIL;
-+
-+ gsw->dev = &pdev->dev;
-+
-+ of_property_read_string(np, "mediatek,port4", &port4);
-+ if (port4 && !strcmp(port4, "ephy"))
-+ gsw->port4 = PORT4_EPHY;
-+ else if (port4 && !strcmp(port4, "gmac"))
-+ gsw->port4 = PORT4_EXT;
-+ else
-+ gsw->port4 = PORT4_EPHY;
-+
-+ gsw->irq = irq_of_parse_and_map(np, 0);
-+
-+ platform_set_drvdata(pdev, gsw);
-+
-+ return 0;
-+}
-+
-+static int mt7620_gsw_remove(struct platform_device *pdev)
-+{
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gsw_driver = {
-+ .probe = mt7620_gsw_probe,
-+ .remove = mt7620_gsw_remove,
-+ .driver = {
-+ .name = "mt7620-gsw",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mediatek_gsw_match,
-+ },
-+};
-+
-+module_platform_driver(gsw_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7620 SoC");
-+MODULE_VERSION(MTK_FE_DRV_VERSION);
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/gsw_mt7620.h
-@@ -0,0 +1,117 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#ifndef _RALINK_GSW_MT7620_H__
-+#define _RALINK_GSW_MT7620_H__
-+
-+#define GSW_REG_PHY_TIMEOUT (5 * HZ)
-+
-+#ifdef CONFIG_SOC_MT7621
-+#define MT7620A_GSW_REG_PIAC 0x0004
-+#else
-+#define MT7620A_GSW_REG_PIAC 0x7004
-+#endif
-+
-+#define GSW_NUM_VLANS 16
-+#define GSW_NUM_VIDS 4096
-+#define GSW_NUM_PORTS 7
-+#define GSW_PORT6 6
-+
-+#define GSW_MDIO_ACCESS BIT(31)
-+#define GSW_MDIO_READ BIT(19)
-+#define GSW_MDIO_WRITE BIT(18)
-+#define GSW_MDIO_START BIT(16)
-+#define GSW_MDIO_ADDR_SHIFT 20
-+#define GSW_MDIO_REG_SHIFT 25
-+
-+#define GSW_REG_PORT_PMCR(x) (0x3000 + (x * 0x100))
-+#define GSW_REG_PORT_STATUS(x) (0x3008 + (x * 0x100))
-+#define GSW_REG_SMACCR0 0x3fE4
-+#define GSW_REG_SMACCR1 0x3fE8
-+#define GSW_REG_CKGCR 0x3ff0
-+
-+#define GSW_REG_IMR 0x7008
-+#define GSW_REG_ISR 0x700c
-+#define GSW_REG_GPC1 0x7014
-+
-+#define SYSC_REG_CHIP_REV_ID 0x0c
-+#define SYSC_REG_CFG1 0x14
-+#define RST_CTRL_MCM BIT(2)
-+#define SYSC_PAD_RGMII2_MDIO 0x58
-+#define SYSC_GPIO_MODE 0x60
-+
-+#define PORT_IRQ_ST_CHG 0x7f
-+
-+#ifdef CONFIG_SOC_MT7621
-+#define ESW_PHY_POLLING 0x0000
-+#else
-+#define ESW_PHY_POLLING 0x7000
-+#endif
-+
-+#define PMCR_IPG BIT(18)
-+#define PMCR_MAC_MODE BIT(16)
-+#define PMCR_FORCE BIT(15)
-+#define PMCR_TX_EN BIT(14)
-+#define PMCR_RX_EN BIT(13)
-+#define PMCR_BACKOFF BIT(9)
-+#define PMCR_BACKPRES BIT(8)
-+#define PMCR_RX_FC BIT(5)
-+#define PMCR_TX_FC BIT(4)
-+#define PMCR_SPEED(_x) (_x << 2)
-+#define PMCR_DUPLEX BIT(1)
-+#define PMCR_LINK BIT(0)
-+
-+#define PHY_AN_EN BIT(31)
-+#define PHY_PRE_EN BIT(30)
-+#define PMY_MDC_CONF(_x) ((_x & 0x3f) << 24)
-+
-+enum {
-+ /* Global attributes. */
-+ GSW_ATTR_ENABLE_VLAN,
-+ /* Port attributes. */
-+ GSW_ATTR_PORT_UNTAG,
-+};
-+
-+enum {
-+ PORT4_EPHY = 0,
-+ PORT4_EXT,
-+};
-+
-+struct mt7620_gsw {
-+ struct device *dev;
-+ void __iomem *base;
-+ int irq;
-+ int port4;
-+ unsigned long int autopoll;
-+};
-+
-+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg);
-+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg);
-+int mtk_gsw_init(struct fe_priv *priv);
-+
-+int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
-+int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
-+void mt7620_mdio_link_adjust(struct fe_priv *priv, int port);
-+int mt7620_has_carrier(struct fe_priv *priv);
-+void mt7620_print_link_state(struct fe_priv *priv, int port, int link,
-+ int speed, int duplex);
-+
-+void mt7530_mdio_w32(struct mt7620_gsw *gsw, u32 reg, u32 val);
-+u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg);
-+
-+u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
-+ u32 phy_register, u32 write_data);
-+u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg);
-+
-+#endif
diff --git a/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch b/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch
deleted file mode 100644
index 08d93f73ea..0000000000
--- a/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch
+++ /dev/null
@@ -1,301 +0,0 @@
-From 9fc19d5f7354709298dcb15b3a4c7cd9a18acebf Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 21:24:46 +0100
-Subject: [PATCH 504/513] net-next: mediatek: add switch driver for mt7621
-
-This driver is very basic and only provides basic init and irq support.
-Switchdev support for this device will follow.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/mediatek/gsw_mt7621.c | 284 ++++++++++++++++++++++++++++
- 1 file changed, 284 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7621.c
-
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/gsw_mt7621.c
-@@ -0,0 +1,284 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/platform_device.h>
-+#include <linux/of_device.h>
-+#include <linux/of_irq.h>
-+
-+#include <ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "gsw_mt7620.h"
-+
-+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
-+{
-+ iowrite32(val, gsw->base + reg);
-+}
-+
-+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg)
-+{
-+ return ioread32(gsw->base + reg);
-+}
-+
-+static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv)
-+{
-+ struct fe_priv *priv = (struct fe_priv *)_priv;
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
-+ u32 reg, i;
-+
-+ reg = mt7530_mdio_r32(gsw, 0x700c);
-+
-+ for (i = 0; i < 5; i++)
-+ if (reg & BIT(i)) {
-+ unsigned int link;
-+
-+ link = mt7530_mdio_r32(gsw,
-+ 0x3008 + (i * 0x100)) & 0x1;
-+
-+ if (link != priv->link[i]) {
-+ priv->link[i] = link;
-+ if (link)
-+ netdev_info(priv->netdev,
-+ "port %d link up\n", i);
-+ else
-+ netdev_info(priv->netdev,
-+ "port %d link down\n", i);
-+ }
-+ }
-+
-+ mt7530_mdio_w32(gsw, 0x700c, 0x1f);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void mt7621_hw_init(struct mt7620_gsw *gsw, struct device_node *np)
-+{
-+ u32 i;
-+ u32 val;
-+
-+ /* wardware reset the switch */
-+ fe_reset(RST_CTRL_MCM);
-+ mdelay(10);
-+
-+ /* reduce RGMII2 PAD driving strength */
-+ rt_sysc_m32(3 << 4, 0, SYSC_PAD_RGMII2_MDIO);
-+
-+ /* gpio mux - RGMII1=Normal mode */
-+ rt_sysc_m32(BIT(14), 0, SYSC_GPIO_MODE);
-+
-+ /* set GMAC1 RGMII mode */
-+ rt_sysc_m32(3 << 12, 0, SYSC_REG_CFG1);
-+
-+ /* enable MDIO to control MT7530 */
-+ rt_sysc_m32(3 << 12, 0, SYSC_GPIO_MODE);
-+
-+ /* turn off all PHYs */
-+ for (i = 0; i <= 4; i++) {
-+ val = _mt7620_mii_read(gsw, i, 0x0);
-+ val |= BIT(11);
-+ _mt7620_mii_write(gsw, i, 0x0, val);
-+ }
-+
-+ /* reset the switch */
-+ mt7530_mdio_w32(gsw, 0x7000, 0x3);
-+ usleep_range(10, 20);
-+
-+ if ((rt_sysc_r32(SYSC_REG_CHIP_REV_ID) & 0xFFFF) == 0x0101) {
-+ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
-+ mtk_switch_w32(gsw, 0x2105e30b, 0x100);
-+ mt7530_mdio_w32(gsw, 0x3600, 0x5e30b);
-+ } else {
-+ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
-+ mtk_switch_w32(gsw, 0x2105e33b, 0x100);
-+ mt7530_mdio_w32(gsw, 0x3600, 0x5e33b);
-+ }
-+
-+ /* (GE2, Link down) */
-+ mtk_switch_w32(gsw, 0x8000, 0x200);
-+
-+ /* Enable Port 6, P5 as GMAC5, P5 disable */
-+ val = mt7530_mdio_r32(gsw, 0x7804);
-+ val &= ~BIT(8);
-+ val |= BIT(6) | BIT(13) | BIT(16);
-+ mt7530_mdio_w32(gsw, 0x7804, val);
-+
-+ val = rt_sysc_r32(0x10);
-+ val = (val >> 6) & 0x7;
-+ if (val >= 6) {
-+ /* 25Mhz Xtal - do nothing */
-+ } else if (val >= 3) {
-+ /* 40Mhz */
-+
-+ /* disable MT7530 core clock */
-+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x410);
-+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x0);
-+
-+ /* disable MT7530 PLL */
-+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x40d);
-+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x2020);
-+
-+ /* for MT7530 core clock = 500Mhz */
-+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x40e);
-+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x119);
-+
-+ /* enable MT7530 PLL */
-+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x40d);
-+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x2820);
-+
-+ usleep_range(20, 40);
-+
-+ /* enable MT7530 core clock */
-+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
-+ _mt7620_mii_write(gsw, 0, 14, 0x410);
-+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
-+ } else {
-+ /* 20Mhz Xtal - TODO */
-+ }
-+
-+ /* RGMII */
-+ _mt7620_mii_write(gsw, 0, 14, 0x1);
-+
-+ /* set MT7530 central align */
-+ val = mt7530_mdio_r32(gsw, 0x7830);
-+ val &= ~BIT(0);
-+ val |= BIT(1);
-+ mt7530_mdio_w32(gsw, 0x7830, val);
-+ val = mt7530_mdio_r32(gsw, 0x7a40);
-+ val &= ~BIT(30);
-+ mt7530_mdio_w32(gsw, 0x7a40, val);
-+ mt7530_mdio_w32(gsw, 0x7a78, 0x855);
-+
-+ /* delay setting for 10/1000M */
-+ mt7530_mdio_w32(gsw, 0x7b00, 0x102);
-+ mt7530_mdio_w32(gsw, 0x7b04, 0x14);
-+
-+ /* lower Tx Driving*/
-+ mt7530_mdio_w32(gsw, 0x7a54, 0x44);
-+ mt7530_mdio_w32(gsw, 0x7a5c, 0x44);
-+ mt7530_mdio_w32(gsw, 0x7a64, 0x44);
-+ mt7530_mdio_w32(gsw, 0x7a6c, 0x44);
-+ mt7530_mdio_w32(gsw, 0x7a74, 0x44);
-+ mt7530_mdio_w32(gsw, 0x7a7c, 0x44);
-+
-+ /* turn on all PHYs */
-+ for (i = 0; i <= 4; i++) {
-+ val = _mt7620_mii_read(gsw, i, 0);
-+ val &= ~BIT(11);
-+ _mt7620_mii_write(gsw, i, 0, val);
-+ }
-+
-+ /* enable irq */
-+ val = mt7530_mdio_r32(gsw, 0x7808);
-+ val |= 3 << 16;
-+ mt7530_mdio_w32(gsw, 0x7808, val);
-+}
-+
-+static const struct of_device_id mediatek_gsw_match[] = {
-+ { .compatible = "mediatek,mt7621-gsw" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, mediatek_gsw_match);
-+
-+int mtk_gsw_init(struct fe_priv *priv)
-+{
-+ struct device_node *np = priv->switch_np;
-+ struct platform_device *pdev = of_find_device_by_node(np);
-+ struct mt7620_gsw *gsw;
-+
-+ if (!pdev)
-+ return -ENODEV;
-+
-+ if (!of_device_is_compatible(np, mediatek_gsw_match->compatible))
-+ return -EINVAL;
-+
-+ gsw = platform_get_drvdata(pdev);
-+ priv->soc->swpriv = gsw;
-+
-+ mt7621_hw_init(gsw, np);
-+
-+ if (gsw->irq) {
-+ request_irq(gsw->irq, gsw_interrupt_mt7621, 0,
-+ "gsw", priv);
-+ mt7530_mdio_w32(gsw, 0x7008, 0x1f);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt7621_gsw_probe(struct platform_device *pdev)
-+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const char *port4 = NULL;
-+ struct mt7620_gsw *gsw;
-+ struct device_node *np;
-+
-+ gsw = devm_kzalloc(&pdev->dev, sizeof(struct mt7620_gsw), GFP_KERNEL);
-+ if (!gsw)
-+ return -ENOMEM;
-+
-+ gsw->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (!gsw->base)
-+ return -EADDRNOTAVAIL;
-+
-+ gsw->dev = &pdev->dev;
-+
-+ of_property_read_string(np, "mediatek,port4", &port4);
-+ if (port4 && !strcmp(port4, "ephy"))
-+ gsw->port4 = PORT4_EPHY;
-+ else if (port4 && !strcmp(port4, "gmac"))
-+ gsw->port4 = PORT4_EXT;
-+ else
-+ gsw->port4 = PORT4_EPHY;
-+
-+ gsw->irq = irq_of_parse_and_map(np, 0);
-+
-+ platform_set_drvdata(pdev, gsw);
-+
-+ return 0;
-+}
-+
-+static int mt7621_gsw_remove(struct platform_device *pdev)
-+{
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gsw_driver = {
-+ .probe = mt7621_gsw_probe,
-+ .remove = mt7621_gsw_remove,
-+ .driver = {
-+ .name = "mt7621-gsw",
-+ .owner = THIS_MODULE,
-+ .of_match_table = mediatek_gsw_match,
-+ },
-+};
-+
-+module_platform_driver(gsw_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7621 SoC");
-+MODULE_VERSION(MTK_FE_DRV_VERSION);
diff --git a/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch b/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch
deleted file mode 100644
index 8ed00e38a6..0000000000
--- a/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-From f8c8f4bd2a13e0cc060c93812377373d436f7f02 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 18 Nov 2015 03:13:05 +0100
-Subject: [PATCH 505/513] net-next: mediatek: add support for rt2880
-
-rt2880 is the oldest SoC with this core. It has a single gBit port that will
-normally be attached to an external phy of switch. The patch also adds the
-code required to drive the mdio bus.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
----
- drivers/net/ethernet/mediatek/mdio_rt2880.c | 222 +++++++++++++++++++++++++++
- drivers/net/ethernet/mediatek/mdio_rt2880.h | 23 +++
- drivers/net/ethernet/mediatek/soc_rt2880.c | 76 +++++++++
- 3 files changed, 321 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/mdio_rt2880.c
- create mode 100644 drivers/net/ethernet/mediatek/mdio_rt2880.h
- create mode 100644 drivers/net/ethernet/mediatek/soc_rt2880.c
-
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mdio_rt2880.c
-@@ -0,0 +1,222 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/of_net.h>
-+#include <linux/of_mdio.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "mdio_rt2880.h"
-+#include "mdio.h"
-+
-+#define FE_MDIO_RETRY 1000
-+
-+static unsigned char *rt2880_speed_str(struct fe_priv *priv)
-+{
-+ switch (priv->phy->speed[0]) {
-+ case SPEED_1000:
-+ return "1000";
-+ case SPEED_100:
-+ return "100";
-+ case SPEED_10:
-+ return "10";
-+ }
-+
-+ return "?";
-+}
-+
-+void rt2880_mdio_link_adjust(struct fe_priv *priv, int port)
-+{
-+ u32 mdio_cfg;
-+
-+ if (!priv->link[0]) {
-+ netif_carrier_off(priv->netdev);
-+ netdev_info(priv->netdev, "link down\n");
-+ return;
-+ }
-+
-+ mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 |
-+ FE_MDIO_CFG_RX_CLK_SKEW_200 |
-+ FE_MDIO_CFG_GP1_FRC_EN;
-+
-+ if (priv->phy->duplex[0] == DUPLEX_FULL)
-+ mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
-+
-+ if (priv->phy->tx_fc[0])
-+ mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
-+
-+ if (priv->phy->rx_fc[0])
-+ mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
-+
-+ switch (priv->phy->speed[0]) {
-+ case SPEED_10:
-+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10;
-+ break;
-+ case SPEED_100:
-+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100;
-+ break;
-+ case SPEED_1000:
-+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000;
-+ break;
-+ default:
-+ BUG();
-+ }
-+
-+ fe_w32(mdio_cfg, FE_MDIO_CFG);
-+
-+ netif_carrier_on(priv->netdev);
-+ netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n",
-+ rt2880_speed_str(priv),
-+ (priv->phy->duplex[0] == DUPLEX_FULL) ? "Full" : "Half");
-+}
-+
-+static int rt2880_mdio_wait_ready(struct fe_priv *priv)
-+{
-+ int retries;
-+
-+ retries = FE_MDIO_RETRY;
-+ while (1) {
-+ u32 t;
-+
-+ t = fe_r32(FE_MDIO_ACCESS);
-+ if ((t & BIT(31)) == 0)
-+ return 0;
-+
-+ if (retries-- == 0)
-+ break;
-+
-+ udelay(1);
-+ }
-+
-+ dev_err(priv->device, "MDIO operation timed out\n");
-+ return -ETIMEDOUT;
-+}
-+
-+int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+ struct fe_priv *priv = bus->priv;
-+ int err;
-+ u32 t;
-+
-+ err = rt2880_mdio_wait_ready(priv);
-+ if (err)
-+ return 0xffff;
-+
-+ t = (phy_addr << 24) | (phy_reg << 16);
-+ fe_w32(t, FE_MDIO_ACCESS);
-+ t |= BIT(31);
-+ fe_w32(t, FE_MDIO_ACCESS);
-+
-+ err = rt2880_mdio_wait_ready(priv);
-+ if (err)
-+ return 0xffff;
-+
-+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
-+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
-+
-+ return fe_r32(FE_MDIO_ACCESS) & 0xffff;
-+}
-+
-+int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
-+{
-+ struct fe_priv *priv = bus->priv;
-+ int err;
-+ u32 t;
-+
-+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
-+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
-+
-+ err = rt2880_mdio_wait_ready(priv);
-+ if (err)
-+ return err;
-+
-+ t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
-+ fe_w32(t, FE_MDIO_ACCESS);
-+ t |= BIT(31);
-+ fe_w32(t, FE_MDIO_ACCESS);
-+
-+ return rt2880_mdio_wait_ready(priv);
-+}
-+
-+void rt2880_port_init(struct fe_priv *priv, struct device_node *np)
-+{
-+ const __be32 *id = of_get_property(np, "reg", NULL);
-+ const __be32 *link;
-+ int size;
-+ int phy_mode;
-+
-+ if (!id || (be32_to_cpu(*id) != 0)) {
-+ pr_err("%s: invalid port id\n", np->name);
-+ return;
-+ }
-+
-+ priv->phy->phy_fixed[0] = of_get_property(np,
-+ "mediatek,fixed-link", &size);
-+ if (priv->phy->phy_fixed[0] &&
-+ (size != (4 * sizeof(*priv->phy->phy_fixed[0])))) {
-+ pr_err("%s: invalid fixed link property\n", np->name);
-+ priv->phy->phy_fixed[0] = NULL;
-+ return;
-+ }
-+
-+ phy_mode = of_get_phy_mode(np);
-+ switch (phy_mode) {
-+ case PHY_INTERFACE_MODE_RGMII:
-+ break;
-+ case PHY_INTERFACE_MODE_MII:
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ break;
-+ default:
-+ if (!priv->phy->phy_fixed[0])
-+ dev_err(priv->device, "port %d - invalid phy mode\n",
-+ priv->phy->speed[0]);
-+ break;
-+ }
-+
-+ priv->phy->phy_node[0] = of_parse_phandle(np, "phy-handle", 0);
-+ if (!priv->phy->phy_node[0] && !priv->phy->phy_fixed[0])
-+ return;
-+
-+ if (priv->phy->phy_fixed[0]) {
-+ link = priv->phy->phy_fixed[0];
-+ priv->phy->speed[0] = be32_to_cpup(link++);
-+ priv->phy->duplex[0] = be32_to_cpup(link++);
-+ priv->phy->tx_fc[0] = be32_to_cpup(link++);
-+ priv->phy->rx_fc[0] = be32_to_cpup(link++);
-+
-+ priv->link[0] = 1;
-+ switch (priv->phy->speed[0]) {
-+ case SPEED_10:
-+ break;
-+ case SPEED_100:
-+ break;
-+ case SPEED_1000:
-+ break;
-+ default:
-+ dev_err(priv->device, "invalid link speed: %d\n",
-+ priv->phy->speed[0]);
-+ priv->phy->phy_fixed[0] = 0;
-+ return;
-+ }
-+ dev_info(priv->device, "using fixed link parameters\n");
-+ rt2880_mdio_link_adjust(priv, 0);
-+ return;
-+ }
-+
-+ if (priv->phy->phy_node[0] && priv->mii_bus->phy_map[0])
-+ fe_connect_phy_node(priv, priv->phy->phy_node[0]);
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mdio_rt2880.h
-@@ -0,0 +1,23 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#ifndef _RALINK_MDIO_RT2880_H__
-+#define _RALINK_MDIO_RT2880_H__
-+
-+void rt2880_mdio_link_adjust(struct fe_priv *priv, int port);
-+int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
-+int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
-+void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/soc_rt2880.c
-@@ -0,0 +1,76 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "mdio_rt2880.h"
-+
-+#define RT2880_RESET_FE BIT(18)
-+
-+static void rt2880_init_data(struct fe_soc_data *data,
-+ struct net_device *netdev)
-+{
-+ struct fe_priv *priv = netdev_priv(netdev);
-+
-+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
-+ FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
-+ netdev->hw_features = NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_TX;
-+ /* this should work according to the datasheet but actually does not*/
-+ /* netdev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM; */
-+}
-+
-+void rt2880_fe_reset(void)
-+{
-+ fe_reset(RT2880_RESET_FE);
-+}
-+
-+static int rt2880_fwd_config(struct fe_priv *priv)
-+{
-+ int ret;
-+
-+ ret = fe_set_clock_cycle(priv);
-+ if (ret)
-+ return ret;
-+
-+ fe_fwd_config(priv);
-+ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
-+ fe_csum_config(priv);
-+
-+ return ret;
-+}
-+
-+struct fe_soc_data rt2880_data = {
-+ .init_data = rt2880_init_data,
-+ .reset_fe = rt2880_fe_reset,
-+ .fwd_config = rt2880_fwd_config,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
-+ .checksum_bit = RX_DMA_L4VALID,
-+ .rx_int = FE_RX_DONE_INT,
-+ .tx_int = FE_TX_DONE_INT,
-+ .status_int = FE_CNT_GDM_AF,
-+ .mdio_read = rt2880_mdio_read,
-+ .mdio_write = rt2880_mdio_write,
-+ .mdio_adjust_link = rt2880_mdio_link_adjust,
-+ .port_init = rt2880_port_init,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch b/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch
deleted file mode 100644
index a80c940ec6..0000000000
--- a/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From a3555658ce5dd97df3dc225289b92800da9d38ba Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 21:28:51 +0100
-Subject: [PATCH 506/513] net-next: mediatek: add support for rt3050
-
-Add support for SoCs from the rt3050 family. This include rt3050, rt3052,
-rt3352 and rt5350. These all have a builtin 5 port 100mbit switch. This patch
-includes rudimentary code to power up the switch. There are a lot of magic
-values that get written to the switch and the internal phys. These values
-come straight from the SDK driver and we do not know the meaning of most of
-them.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
----
- drivers/net/ethernet/mediatek/esw_rt3050.c | 18 +---
- drivers/net/ethernet/mediatek/soc_rt3050.c | 158 ++++++++++++++++++++++++++++
- 2 files changed, 159 insertions(+), 17 deletions(-)
- create mode 100644 drivers/net/ethernet/mediatek/soc_rt3050.c
-
---- a/drivers/net/ethernet/mediatek/esw_rt3050.c
-+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
-@@ -14,27 +14,11 @@
-
- #include <linux/module.h>
- #include <linux/kernel.h>
--#include <linux/types.h>
--#include <linux/dma-mapping.h>
--#include <linux/init.h>
--#include <linux/skbuff.h>
--#include <linux/etherdevice.h>
--#include <linux/ethtool.h>
- #include <linux/platform_device.h>
--#include <linux/of_device.h>
--#include <linux/clk.h>
--#include <linux/of_net.h>
--#include <linux/of_mdio.h>
--
- #include <asm/mach-ralink/ralink_regs.h>
-
- #include "mtk_eth_soc.h"
-
--#include <linux/ioport.h>
--#include <linux/mii.h>
--
--#include <ralink_regs.h>
--
- /* HW limitations for this switch:
- * - No large frame support (PKT_MAX_LEN at most 1536)
- * - Can't have untagged vlan and tagged vlan on one port at the same time,
-@@ -559,7 +543,7 @@ static irqreturn_t esw_interrupt(int irq
-
- static int esw_probe(struct platform_device *pdev)
- {
-- struct resource *res = platform_get_resource(p, IORESOURCE_MEM, 0);
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct device_node *np = pdev->dev.of_node;
- const __be32 *port_map, *reg_init;
- struct rt305x_esw *esw;
-@@ -629,12 +613,9 @@ static struct platform_driver esw_driver
- },
- };
-
--int __init mtk_switch_init(void)
--{
-- return platform_driver_register(&esw_driver);
--}
-+module_platform_driver(esw_driver);
-
--void mtk_switch_exit(void)
--{
-- platform_driver_unregister(&esw_driver);
--}
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Switch driver for RT305X SoC");
-+MODULE_VERSION(MTK_FE_DRV_VERSION);
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/soc_rt3050.c
-@@ -0,0 +1,158 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "mdio_rt2880.h"
-+
-+#define RT305X_RESET_FE BIT(21)
-+#define RT305X_RESET_ESW BIT(23)
-+
-+static const u16 rt5350_reg_table[FE_REG_COUNT] = {
-+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
-+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
-+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
-+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
-+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
-+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
-+ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
-+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
-+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
-+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
-+ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
-+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
-+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
-+ [FE_REG_FE_RST_GL] = 0,
-+ [FE_REG_FE_DMA_VID_BASE] = 0,
-+};
-+
-+static void rt305x_init_data(struct fe_soc_data *data,
-+ struct net_device *netdev)
-+{
-+ struct fe_priv *priv = netdev_priv(netdev);
-+
-+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
-+ FE_FLAG_CALIBRATE_CLK | FE_FLAG_HAS_SWITCH;
-+ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
-+ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
-+}
-+
-+static int rt3050_fwd_config(struct fe_priv *priv)
-+{
-+ int ret;
-+
-+ if (ralink_soc != RT305X_SOC_RT3052) {
-+ ret = fe_set_clock_cycle(priv);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ fe_fwd_config(priv);
-+ if (ralink_soc != RT305X_SOC_RT3352)
-+ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
-+ fe_csum_config(priv);
-+
-+ return 0;
-+}
-+
-+static void rt305x_fe_reset(void)
-+{
-+ fe_reset(RT305X_RESET_FE);
-+}
-+
-+static void rt5350_init_data(struct fe_soc_data *data,
-+ struct net_device *netdev)
-+{
-+ struct fe_priv *priv = netdev_priv(netdev);
-+
-+ priv->flags = FE_FLAG_HAS_SWITCH;
-+ netdev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM;
-+}
-+
-+static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH);
-+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+ RT5350_SDM_MAC_ADRL);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+}
-+
-+static void rt5350_rxcsum_config(bool enable)
-+{
-+ if (enable)
-+ fe_w32(fe_r32(RT5350_SDM_CFG) | (RT5350_SDM_ICS_EN |
-+ RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN),
-+ RT5350_SDM_CFG);
-+ else
-+ fe_w32(fe_r32(RT5350_SDM_CFG) & ~(RT5350_SDM_ICS_EN |
-+ RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN),
-+ RT5350_SDM_CFG);
-+}
-+
-+static int rt5350_fwd_config(struct fe_priv *priv)
-+{
-+ struct net_device *dev = priv_netdev(priv);
-+
-+ rt5350_rxcsum_config((dev->features & NETIF_F_RXCSUM));
-+
-+ return 0;
-+}
-+
-+static void rt5350_tx_dma(struct fe_tx_dma *txd)
-+{
-+ txd->txd4 = 0;
-+}
-+
-+static void rt5350_fe_reset(void)
-+{
-+ fe_reset(RT305X_RESET_FE | RT305X_RESET_ESW);
-+}
-+
-+static struct fe_soc_data rt3050_data = {
-+ .init_data = rt305x_init_data,
-+ .reset_fe = rt305x_fe_reset,
-+ .fwd_config = rt3050_fwd_config,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
-+ .checksum_bit = RX_DMA_L4VALID,
-+ .rx_int = FE_RX_DONE_INT,
-+ .tx_int = FE_TX_DONE_INT,
-+ .status_int = FE_CNT_GDM_AF,
-+};
-+
-+static struct fe_soc_data rt5350_data = {
-+ .init_data = rt5350_init_data,
-+ .reg_table = rt5350_reg_table,
-+ .reset_fe = rt5350_fe_reset,
-+ .set_mac = rt5350_set_mac,
-+ .fwd_config = rt5350_fwd_config,
-+ .tx_dma = rt5350_tx_dma,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
-+ .checksum_bit = RX_DMA_L4VALID,
-+ .rx_int = RT5350_RX_DONE_INT,
-+ .tx_int = RT5350_TX_DONE_INT,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "ralink,rt3050-eth", .data = &rt3050_data },
-+ { .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch b/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch
deleted file mode 100644
index 53d35d0728..0000000000
--- a/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 5ad283c69029a519681ed453e7f7ddf250c10559 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 18 Nov 2015 03:51:24 +0100
-Subject: [PATCH 507/513] net-next: mediatek: add support for rt3883
-
-Add support for rt3883 and its smaller version rt3662. They both have a single
-gBit port that will normally be attached to an external phy of switch.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
----
- drivers/net/ethernet/mediatek/soc_rt3883.c | 75 ++++++++++++++++++++++++++++
- 1 file changed, 75 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/soc_rt3883.c
-
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/soc_rt3883.c
-@@ -0,0 +1,75 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "mdio_rt2880.h"
-+
-+#define RT3883_RSTCTRL_FE BIT(21)
-+
-+static void rt3883_fe_reset(void)
-+{
-+ fe_reset(RT3883_RSTCTRL_FE);
-+}
-+
-+static int rt3883_fwd_config(struct fe_priv *priv)
-+{
-+ int ret;
-+
-+ ret = fe_set_clock_cycle(priv);
-+ if (ret)
-+ return ret;
-+
-+ fe_fwd_config(priv);
-+ fe_w32(FE_PSE_FQFC_CFG_256Q, FE_PSE_FQ_CFG);
-+ fe_csum_config(priv);
-+
-+ return ret;
-+}
-+
-+static void rt3883_init_data(struct fe_soc_data *data,
-+ struct net_device *netdev)
-+{
-+ struct fe_priv *priv = netdev_priv(netdev);
-+
-+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
-+ FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
-+ netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
-+ NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
-+}
-+
-+static struct fe_soc_data rt3883_data = {
-+ .init_data = rt3883_init_data,
-+ .reset_fe = rt3883_fe_reset,
-+ .fwd_config = rt3883_fwd_config,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
-+ .rx_int = FE_RX_DONE_INT,
-+ .tx_int = FE_TX_DONE_INT,
-+ .status_int = FE_CNT_GDM_AF,
-+ .checksum_bit = RX_DMA_L4VALID,
-+ .mdio_read = rt2880_mdio_read,
-+ .mdio_write = rt2880_mdio_write,
-+ .mdio_adjust_link = rt2880_mdio_link_adjust,
-+ .port_init = rt2880_port_init,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch b/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch
deleted file mode 100644
index 4055026cb5..0000000000
--- a/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch
+++ /dev/null
@@ -1,519 +0,0 @@
-From 1efca7b539a91c49ab1d6484ec3a69c48fa6062b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 21:25:35 +0100
-Subject: [PATCH 508/513] net-next: mediatek: add support for mt7620
-
-Add support for SoCs from the mt7620 family. This include mt7620 and mt7621.
-These all have one dedicated external gbit port and a builtin 5 port 100mbit
-switch. Additionally one of the 5 switch ports can be changed to become an
-additional gbit port that we can attach a phy to. This patch includes
-rudimentary code to power up the switch. There are a lot of magic values
-that get written to the switch and the internal phys. These values come
-straight from the SDK driver.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
----
- drivers/net/ethernet/mediatek/mdio_mt7620.c | 156 +++++++++++++
- drivers/net/ethernet/mediatek/soc_mt7620.c | 334 +++++++++++++++++++++++++++
- 2 files changed, 490 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/mdio_mt7620.c
- create mode 100644 drivers/net/ethernet/mediatek/soc_mt7620.c
-
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mdio_mt7620.c
-@@ -0,0 +1,156 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "gsw_mt7620.h"
-+#include "mdio.h"
-+
-+static int mt7620_mii_busy_wait(struct mt7620_gsw *gsw)
-+{
-+ unsigned long t_start = jiffies;
-+
-+ while (1) {
-+ if (!(mtk_switch_r32(gsw, MT7620A_GSW_REG_PIAC) & GSW_MDIO_ACCESS))
-+ return 0;
-+ if (time_after(jiffies, t_start + GSW_REG_PHY_TIMEOUT))
-+ break;
-+ }
-+
-+ dev_err(gsw->dev, "mdio: MDIO timeout\n");
-+ return -1;
-+}
-+
-+u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
-+ u32 phy_register, u32 write_data)
-+{
-+ if (mt7620_mii_busy_wait(gsw))
-+ return -1;
-+
-+ write_data &= 0xffff;
-+
-+ mtk_switch_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_WRITE |
-+ (phy_register << GSW_MDIO_REG_SHIFT) |
-+ (phy_addr << GSW_MDIO_ADDR_SHIFT) | write_data,
-+ MT7620A_GSW_REG_PIAC);
-+
-+ if (mt7620_mii_busy_wait(gsw))
-+ return -1;
-+
-+ return 0;
-+}
-+
-+u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg)
-+{
-+ u32 d;
-+
-+ if (mt7620_mii_busy_wait(gsw))
-+ return 0xffff;
-+
-+ mtk_switch_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_READ |
-+ (phy_reg << GSW_MDIO_REG_SHIFT) |
-+ (phy_addr << GSW_MDIO_ADDR_SHIFT),
-+ MT7620A_GSW_REG_PIAC);
-+
-+ if (mt7620_mii_busy_wait(gsw))
-+ return 0xffff;
-+
-+ d = mtk_switch_r32(gsw, MT7620A_GSW_REG_PIAC) & 0xffff;
-+
-+ return d;
-+}
-+
-+int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
-+{
-+ struct fe_priv *priv = bus->priv;
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
-+
-+ return _mt7620_mii_write(gsw, phy_addr, phy_reg, val);
-+}
-+
-+int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+ struct fe_priv *priv = bus->priv;
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
-+
-+ return _mt7620_mii_read(gsw, phy_addr, phy_reg);
-+}
-+
-+void mt7530_mdio_w32(struct mt7620_gsw *gsw, u32 reg, u32 val)
-+{
-+ _mt7620_mii_write(gsw, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ _mt7620_mii_write(gsw, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
-+ _mt7620_mii_write(gsw, 0x1f, 0x10, val >> 16);
-+}
-+
-+u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg)
-+{
-+ u16 high, low;
-+
-+ _mt7620_mii_write(gsw, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ low = _mt7620_mii_read(gsw, 0x1f, (reg >> 2) & 0xf);
-+ high = _mt7620_mii_read(gsw, 0x1f, 0x10);
-+
-+ return (high << 16) | (low & 0xffff);
-+}
-+
-+static unsigned char *fe_speed_str(int speed)
-+{
-+ switch (speed) {
-+ case 2:
-+ case SPEED_1000:
-+ return "1000";
-+ case 1:
-+ case SPEED_100:
-+ return "100";
-+ case 0:
-+ case SPEED_10:
-+ return "10";
-+ }
-+
-+ return "? ";
-+}
-+
-+int mt7620_has_carrier(struct fe_priv *priv)
-+{
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
-+ int i;
-+
-+ for (i = 0; i < GSW_PORT6; i++)
-+ if (mtk_switch_r32(gsw, GSW_REG_PORT_STATUS(i)) & 0x1)
-+ return 1;
-+ return 0;
-+}
-+
-+
-+void mt7620_print_link_state(struct fe_priv *priv, int port, int link,
-+ int speed, int duplex)
-+{
-+ if (link)
-+ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n",
-+ port, fe_speed_str(speed),
-+ (duplex) ? "Full" : "Half");
-+ else
-+ netdev_info(priv->netdev, "port %d link down\n", port);
-+}
-+
-+void mt7620_mdio_link_adjust(struct fe_priv *priv, int port)
-+{
-+ mt7620_print_link_state(priv, port, priv->link[port],
-+ priv->phy->speed[port],
-+ (priv->phy->duplex[port] == DUPLEX_FULL));
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/soc_mt7620.c
-@@ -0,0 +1,334 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/if_vlan.h>
-+#include <linux/of_net.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include <mt7620.h>
-+#include "mtk_eth_soc.h"
-+#include "gsw_mt7620.h"
-+#include "mt7530.h"
-+#include "mdio.h"
-+
-+#define MT7620A_CDMA_CSG_CFG 0x400
-+#define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30)
-+#define MT7621_CDMP_IG_CTRL (MT7620A_CDMA_CSG_CFG + 0x00)
-+#define MT7621_CDMP_EG_CTRL (MT7620A_CDMA_CSG_CFG + 0x04)
-+#define MT7620A_RESET_FE BIT(21)
-+#define MT7621_RESET_FE BIT(6)
-+#define MT7620A_RESET_ESW BIT(23)
-+#define MT7620_L4_VALID BIT(23)
-+#define MT7621_L4_VALID BIT(24)
-+
-+#define MT7620_TX_DMA_UDF BIT(15)
-+#define MT7621_TX_DMA_UDF BIT(19)
-+#define TX_DMA_FP_BMAP ((0xff) << 19)
-+
-+#define CDMA_ICS_EN BIT(2)
-+#define CDMA_UCS_EN BIT(1)
-+#define CDMA_TCS_EN BIT(0)
-+
-+#define GDMA_ICS_EN BIT(22)
-+#define GDMA_TCS_EN BIT(21)
-+#define GDMA_UCS_EN BIT(20)
-+
-+/* frame engine counters */
-+#define MT7620_REG_MIB_OFFSET 0x1000
-+#define MT7620_PPE_AC_BCNT0 (MT7620_REG_MIB_OFFSET + 0x00)
-+#define MT7620_GDM1_TX_GBCNT (MT7620_REG_MIB_OFFSET + 0x300)
-+#define MT7620_GDM2_TX_GBCNT (MT7620_GDM1_TX_GBCNT + 0x40)
-+
-+#define MT7621_REG_MIB_OFFSET 0x2000
-+#define MT7621_PPE_AC_BCNT0 (MT7621_REG_MIB_OFFSET + 0x00)
-+#define MT7621_GDM1_TX_GBCNT (MT7621_REG_MIB_OFFSET + 0x400)
-+#define MT7621_GDM2_TX_GBCNT (MT7621_GDM1_TX_GBCNT + 0x40)
-+
-+#define GSW_REG_GDMA1_MAC_ADRL 0x508
-+#define GSW_REG_GDMA1_MAC_ADRH 0x50C
-+
-+#define MT7621_FE_RST_GL (FE_FE_OFFSET + 0x04)
-+#define MT7620_FE_INT_STATUS2 (FE_FE_OFFSET + 0x08)
-+
-+/* FE_INT_STATUS reg on mt7620 define CNT_GDM1_AF at BIT(29)
-+ * but after test it should be BIT(13).
-+ */
-+#define MT7620_FE_GDM1_AF BIT(13)
-+#define MT7621_FE_GDM1_AF BIT(28)
-+#define MT7621_FE_GDM2_AF BIT(29)
-+
-+static const u16 mt7620_reg_table[FE_REG_COUNT] = {
-+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
-+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
-+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
-+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
-+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
-+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
-+ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
-+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
-+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
-+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
-+ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
-+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
-+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
-+ [FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID,
-+ [FE_REG_FE_COUNTER_BASE] = MT7620_GDM1_TX_GBCNT,
-+ [FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
-+ [FE_REG_FE_INT_STATUS2] = MT7620_FE_INT_STATUS2,
-+};
-+
-+static int mt7620_gsw_config(struct fe_priv *priv)
-+{
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv;
-+
-+ /* is the mt7530 internal or external */
-+ if (priv->mii_bus && priv->mii_bus->phy_map[0x1f]) {
-+ mt7530_probe(priv->device, gsw->base, NULL, 0);
-+ mt7530_probe(priv->device, NULL, priv->mii_bus, 1);
-+ } else {
-+ mt7530_probe(priv->device, gsw->base, NULL, 1);
-+ }
-+
-+ return 0;
-+}
-+
-+static void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac)
-+{
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ mtk_switch_w32(gsw, (mac[0] << 8) | mac[1], GSW_REG_SMACCR1);
-+ mtk_switch_w32(gsw, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+ GSW_REG_SMACCR0);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+}
-+
-+static void mt7620_auto_poll(struct mt7620_gsw *gsw)
-+{
-+ int phy;
-+ int lsb = -1, msb = 0;
-+
-+ for_each_set_bit(phy, &gsw->autopoll, 32) {
-+ if (lsb < 0)
-+ lsb = phy;
-+ msb = phy;
-+ }
-+
-+ if (lsb == msb)
-+ lsb--;
-+
-+ mtk_switch_w32(gsw, PHY_AN_EN | PHY_PRE_EN | PMY_MDC_CONF(5) |
-+ (msb << 8) | lsb, ESW_PHY_POLLING);
-+}
-+
-+static void mt7620_port_init(struct fe_priv *priv, struct device_node *np)
-+{
-+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
-+ const __be32 *_id = of_get_property(np, "reg", NULL);
-+ int phy_mode, size, id;
-+ int shift = 12;
-+ u32 val, mask = 0;
-+ int min = (gsw->port4 == PORT4_EPHY) ? (5) : (4);
-+
-+ if (!_id || (be32_to_cpu(*_id) < min) || (be32_to_cpu(*_id) > 5)) {
-+ if (_id)
-+ pr_err("%s: invalid port id %d\n", np->name,
-+ be32_to_cpu(*_id));
-+ else
-+ pr_err("%s: invalid port id\n", np->name);
-+ return;
-+ }
-+
-+ id = be32_to_cpu(*_id);
-+
-+ if (id == 4)
-+ shift = 14;
-+
-+ priv->phy->phy_fixed[id] = of_get_property(np, "mediatek,fixed-link",
-+ &size);
-+ if (priv->phy->phy_fixed[id] &&
-+ (size != (4 * sizeof(*priv->phy->phy_fixed[id])))) {
-+ pr_err("%s: invalid fixed link property\n", np->name);
-+ priv->phy->phy_fixed[id] = NULL;
-+ return;
-+ }
-+
-+ phy_mode = of_get_phy_mode(np);
-+ switch (phy_mode) {
-+ case PHY_INTERFACE_MODE_RGMII:
-+ mask = 0;
-+ break;
-+ case PHY_INTERFACE_MODE_MII:
-+ mask = 1;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ mask = 2;
-+ break;
-+ default:
-+ dev_err(priv->device, "port %d - invalid phy mode\n", id);
-+ return;
-+ }
-+
-+ priv->phy->phy_node[id] = of_parse_phandle(np, "phy-handle", 0);
-+ if (!priv->phy->phy_node[id] && !priv->phy->phy_fixed[id])
-+ return;
-+
-+ val = rt_sysc_r32(SYSC_REG_CFG1);
-+ val &= ~(3 << shift);
-+ val |= mask << shift;
-+ rt_sysc_w32(val, SYSC_REG_CFG1);
-+
-+ if (priv->phy->phy_fixed[id]) {
-+ const __be32 *link = priv->phy->phy_fixed[id];
-+ int tx_fc, rx_fc;
-+ u32 val = 0;
-+
-+ priv->phy->speed[id] = be32_to_cpup(link++);
-+ tx_fc = be32_to_cpup(link++);
-+ rx_fc = be32_to_cpup(link++);
-+ priv->phy->duplex[id] = be32_to_cpup(link++);
-+ priv->link[id] = 1;
-+
-+ switch (priv->phy->speed[id]) {
-+ case SPEED_10:
-+ val = 0;
-+ break;
-+ case SPEED_100:
-+ val = 1;
-+ break;
-+ case SPEED_1000:
-+ val = 2;
-+ break;
-+ default:
-+ dev_err(priv->device, "invalid link speed: %d\n",
-+ priv->phy->speed[id]);
-+ priv->phy->phy_fixed[id] = 0;
-+ return;
-+ }
-+ val = PMCR_SPEED(val);
-+ val |= PMCR_LINK | PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
-+ PMCR_TX_EN | PMCR_FORCE | PMCR_MAC_MODE | PMCR_IPG;
-+ if (tx_fc)
-+ val |= PMCR_TX_FC;
-+ if (rx_fc)
-+ val |= PMCR_RX_FC;
-+ if (priv->phy->duplex[id])
-+ val |= PMCR_DUPLEX;
-+ mtk_switch_w32(gsw, val, GSW_REG_PORT_PMCR(id));
-+ dev_info(priv->device, "using fixed link parameters\n");
-+ return;
-+ }
-+
-+ if (priv->phy->phy_node[id] && priv->mii_bus->phy_map[id]) {
-+ u32 val = PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN |
-+ PMCR_TX_EN | PMCR_MAC_MODE | PMCR_IPG;
-+
-+ mtk_switch_w32(gsw, val, GSW_REG_PORT_PMCR(id));
-+ fe_connect_phy_node(priv, priv->phy->phy_node[id]);
-+ gsw->autopoll |= BIT(id);
-+ mt7620_auto_poll(gsw);
-+ return;
-+ }
-+}
-+
-+static void mt7620_fe_reset(void)
-+{
-+ fe_reset(MT7620A_RESET_FE | MT7620A_RESET_ESW);
-+}
-+
-+static void mt7620_rxcsum_config(bool enable)
-+{
-+ if (enable)
-+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN |
-+ GDMA_TCS_EN | GDMA_UCS_EN),
-+ MT7620A_GDMA1_FWD_CFG);
-+ else
-+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~(GDMA_ICS_EN |
-+ GDMA_TCS_EN | GDMA_UCS_EN),
-+ MT7620A_GDMA1_FWD_CFG);
-+}
-+
-+static void mt7620_txcsum_config(bool enable)
-+{
-+ if (enable)
-+ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) | (CDMA_ICS_EN |
-+ CDMA_UCS_EN | CDMA_TCS_EN),
-+ MT7620A_CDMA_CSG_CFG);
-+ else
-+ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) & ~(CDMA_ICS_EN |
-+ CDMA_UCS_EN | CDMA_TCS_EN),
-+ MT7620A_CDMA_CSG_CFG);
-+}
-+
-+static int mt7620_fwd_config(struct fe_priv *priv)
-+{
-+ struct net_device *dev = priv_netdev(priv);
-+
-+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~7, MT7620A_GDMA1_FWD_CFG);
-+
-+ mt7620_txcsum_config((dev->features & NETIF_F_IP_CSUM));
-+ mt7620_rxcsum_config((dev->features & NETIF_F_RXCSUM));
-+
-+ return 0;
-+}
-+
-+static void mt7620_tx_dma(struct fe_tx_dma *txd)
-+{
-+}
-+
-+static void mt7620_init_data(struct fe_soc_data *data,
-+ struct net_device *netdev)
-+{
-+ struct fe_priv *priv = netdev_priv(netdev);
-+
-+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET |
-+ FE_FLAG_RX_SG_DMA | FE_FLAG_HAS_SWITCH;
-+
-+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
-+ NETIF_F_HW_VLAN_CTAG_TX;
-+ if (mt7620_get_eco() >= 5)
-+ netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
-+ NETIF_F_IPV6_CSUM;
-+}
-+
-+static struct fe_soc_data mt7620_data = {
-+ .init_data = mt7620_init_data,
-+ .reset_fe = mt7620_fe_reset,
-+ .set_mac = mt7620_set_mac,
-+ .fwd_config = mt7620_fwd_config,
-+ .tx_dma = mt7620_tx_dma,
-+ .switch_init = mtk_gsw_init,
-+ .port_init = mt7620_port_init,
-+ .reg_table = mt7620_reg_table,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
-+ .rx_int = RT5350_RX_DONE_INT,
-+ .tx_int = RT5350_TX_DONE_INT,
-+ .status_int = MT7620_FE_GDM1_AF,
-+ .checksum_bit = MT7620_L4_VALID,
-+ .has_carrier = mt7620_has_carrier,
-+ .mdio_read = mt7620_mdio_read,
-+ .mdio_write = mt7620_mdio_write,
-+ .mdio_adjust_link = mt7620_mdio_link_adjust,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "mediatek,mt7620-eth", .data = &mt7620_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch b/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch
deleted file mode 100644
index 401453904c..0000000000
--- a/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch
+++ /dev/null
@@ -1,210 +0,0 @@
-From 107ff718dad1c8f6abbf6247d6796a4535b71276 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 23:50:53 +0100
-Subject: [PATCH 509/513] net-next: mediatek: add support for mt7621
-
-Add support for SoCs from the mt7620 family. This include mt7620 and mt7621.
-These all have one dedicated external gbit port and a builtin 5 port 100mbit
-switch. Additionally one of the 5 switch ports can be changed to become an
-additional gbit port that we can attach a phy to. This patch includes
-rudimentary code to power up the switch. There are a lot of magic values
-that get written to the switch and the internal phys. These values come
-straight from the SDK driver.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
----
- drivers/net/ethernet/mediatek/soc_mt7621.c | 186 ++++++++++++++++++++++++++++
- 1 file changed, 186 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/soc_mt7621.c
-
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/soc_mt7621.c
-@@ -0,0 +1,186 @@
-+/* This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/if_vlan.h>
-+#include <linux/of_net.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#include "mtk_eth_soc.h"
-+#include "gsw_mt7620.h"
-+#include "mt7530.h"
-+#include "mdio.h"
-+
-+#define MT7620A_CDMA_CSG_CFG 0x400
-+#define MT7621_CDMP_IG_CTRL (MT7620A_CDMA_CSG_CFG + 0x00)
-+#define MT7621_CDMP_EG_CTRL (MT7620A_CDMA_CSG_CFG + 0x04)
-+#define MT7621_RESET_FE BIT(6)
-+#define MT7621_L4_VALID BIT(24)
-+
-+#define MT7621_TX_DMA_UDF BIT(19)
-+#define MT7621_TX_DMA_FPORT BIT(25)
-+
-+#define CDMA_ICS_EN BIT(2)
-+#define CDMA_UCS_EN BIT(1)
-+#define CDMA_TCS_EN BIT(0)
-+
-+#define GDMA_ICS_EN BIT(22)
-+#define GDMA_TCS_EN BIT(21)
-+#define GDMA_UCS_EN BIT(20)
-+
-+/* frame engine counters */
-+#define MT7621_REG_MIB_OFFSET 0x2000
-+#define MT7621_PPE_AC_BCNT0 (MT7621_REG_MIB_OFFSET + 0x00)
-+#define MT7621_GDM1_TX_GBCNT (MT7621_REG_MIB_OFFSET + 0x400)
-+#define MT7621_GDM2_TX_GBCNT (MT7621_GDM1_TX_GBCNT + 0x40)
-+
-+#define GSW_REG_GDMA1_MAC_ADRL 0x508
-+#define GSW_REG_GDMA1_MAC_ADRH 0x50C
-+
-+#define MT7621_FE_RST_GL (FE_FE_OFFSET + 0x04)
-+#define MT7620_FE_INT_STATUS2 (FE_FE_OFFSET + 0x08)
-+
-+/* FE_INT_STATUS reg on mt7620 define CNT_GDM1_AF at BIT(29)
-+ * but after test it should be BIT(13).
-+ */
-+#define MT7620_FE_GDM1_AF BIT(13)
-+#define MT7621_FE_GDM1_AF BIT(28)
-+#define MT7621_FE_GDM2_AF BIT(29)
-+
-+static const u16 mt7621_reg_table[FE_REG_COUNT] = {
-+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
-+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
-+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
-+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
-+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
-+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
-+ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
-+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
-+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
-+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
-+ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
-+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
-+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
-+ [FE_REG_FE_DMA_VID_BASE] = 0,
-+ [FE_REG_FE_COUNTER_BASE] = MT7621_GDM1_TX_GBCNT,
-+ [FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
-+ [FE_REG_FE_INT_STATUS2] = MT7620_FE_INT_STATUS2,
-+};
-+
-+static int mt7621_gsw_config(struct fe_priv *priv)
-+{
-+ if (priv->mii_bus && priv->mii_bus->phy_map[0x1f])
-+ mt7530_probe(priv->device, NULL, priv->mii_bus, 1);
-+
-+ return 0;
-+}
-+
-+static void mt7621_fe_reset(void)
-+{
-+ fe_reset(MT7621_RESET_FE);
-+}
-+
-+static void mt7621_rxcsum_config(bool enable)
-+{
-+ if (enable)
-+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN |
-+ GDMA_TCS_EN | GDMA_UCS_EN),
-+ MT7620A_GDMA1_FWD_CFG);
-+ else
-+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~(GDMA_ICS_EN |
-+ GDMA_TCS_EN | GDMA_UCS_EN),
-+ MT7620A_GDMA1_FWD_CFG);
-+}
-+
-+static void mt7621_rxvlan_config(bool enable)
-+{
-+ if (enable)
-+ fe_w32(1, MT7621_CDMP_EG_CTRL);
-+ else
-+ fe_w32(0, MT7621_CDMP_EG_CTRL);
-+}
-+
-+static int mt7621_fwd_config(struct fe_priv *priv)
-+{
-+ struct net_device *dev = priv_netdev(priv);
-+
-+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~0xffff,
-+ MT7620A_GDMA1_FWD_CFG);
-+
-+ /* mt7621 doesn't have txcsum config */
-+ mt7621_rxcsum_config((dev->features & NETIF_F_RXCSUM));
-+ mt7621_rxvlan_config((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
-+ (priv->flags & FE_FLAG_RX_VLAN_CTAG));
-+
-+ return 0;
-+}
-+
-+static void mt7621_tx_dma(struct fe_tx_dma *txd)
-+{
-+ txd->txd4 = MT7621_TX_DMA_FPORT;
-+}
-+
-+static void mt7621_init_data(struct fe_soc_data *data,
-+ struct net_device *netdev)
-+{
-+ struct fe_priv *priv = netdev_priv(netdev);
-+
-+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET |
-+ FE_FLAG_RX_SG_DMA | FE_FLAG_NAPI_WEIGHT |
-+ FE_FLAG_HAS_SWITCH;
-+
-+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
-+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_SG | NETIF_F_TSO |
-+ NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
-+}
-+
-+static void mt7621_set_mac(struct fe_priv *priv, unsigned char *mac)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->page_lock, flags);
-+ fe_w32((mac[0] << 8) | mac[1], GSW_REG_GDMA1_MAC_ADRH);
-+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
-+ GSW_REG_GDMA1_MAC_ADRL);
-+ spin_unlock_irqrestore(&priv->page_lock, flags);
-+}
-+
-+static struct fe_soc_data mt7621_data = {
-+ .init_data = mt7621_init_data,
-+ .reset_fe = mt7621_fe_reset,
-+ .set_mac = mt7621_set_mac,
-+ .fwd_config = mt7621_fwd_config,
-+ .tx_dma = mt7621_tx_dma,
-+ .switch_init = mtk_gsw_init,
-+ .switch_config = mt7621_gsw_config,
-+ .reg_table = mt7621_reg_table,
-+ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
-+ .rx_int = RT5350_RX_DONE_INT,
-+ .tx_int = RT5350_TX_DONE_INT,
-+ .status_int = (MT7621_FE_GDM1_AF | MT7621_FE_GDM2_AF),
-+ .checksum_bit = MT7621_L4_VALID,
-+ .has_carrier = mt7620_has_carrier,
-+ .mdio_read = mt7620_mdio_read,
-+ .mdio_write = mt7620_mdio_write,
-+ .mdio_adjust_link = mt7620_mdio_link_adjust,
-+};
-+
-+const struct of_device_id of_fe_match[] = {
-+ { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_fe_match);
diff --git a/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch b/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch
deleted file mode 100644
index 51427adcc5..0000000000
--- a/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From b6f779ea9c329451b89404583b45b9eb00155b32 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 18 Nov 2015 03:58:26 +0100
-Subject: [PATCH 510/513] net-next: mediatek: add Kconfig and Makefile
-
-This patch adds the Makefile and Kconfig required to make the driver build.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Michael Lee <igvtee@gmail.com>
----
- drivers/net/ethernet/Kconfig | 1 +
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/mediatek/Kconfig | 62 ++++++++++++++++++++++++++++++++
- drivers/net/ethernet/mediatek/Makefile | 20 +++++++++++
- 4 files changed, 84 insertions(+)
- create mode 100644 drivers/net/ethernet/mediatek/Kconfig
- create mode 100644 drivers/net/ethernet/mediatek/Makefile
-
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -106,6 +106,7 @@ config LANTIQ_ETOP
- Support for the MII0 inside the Lantiq SoC
-
- source "drivers/net/ethernet/marvell/Kconfig"
-+source "drivers/net/ethernet/mediatek/Kconfig"
- source "drivers/net/ethernet/mellanox/Kconfig"
- source "drivers/net/ethernet/micrel/Kconfig"
- source "drivers/net/ethernet/microchip/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
-+obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
- obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
- obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/Kconfig
-@@ -0,0 +1,62 @@
-+config NET_VENDOR_MEDIATEK
-+ tristate "Mediatek/Ralink ethernet driver"
-+ depends on RALINK
-+ help
-+ This driver supports the ethernet mac inside the Mediatek and Ralink WiSoCs
-+
-+config NET_MEDIATEK_SOC
-+ def_tristate NET_VENDOR_MEDIATEK
-+
-+if NET_MEDIATEK_SOC
-+choice
-+ prompt "MAC type"
-+
-+config NET_MEDIATEK_RT2880
-+ bool "RT2882"
-+ depends on MIPS && SOC_RT288X
-+
-+config NET_MEDIATEK_RT3050
-+ bool "RT3050/MT7628"
-+ depends on MIPS && (SOC_RT305X || SOC_MT7620)
-+
-+config NET_MEDIATEK_RT3883
-+ bool "RT3883"
-+ depends on MIPS && SOC_RT3883
-+
-+config NET_MEDIATEK_MT7620
-+ bool "MT7620"
-+ depends on MIPS && SOC_MT7620
-+
-+config NET_MEDIATEK_MT7621
-+ bool "MT7621"
-+ depends on MIPS && SOC_MT7621
-+
-+endchoice
-+
-+config NET_MEDIATEK_MDIO
-+ def_bool NET_MEDIATEK_SOC
-+ depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883 || NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621)
-+ select PHYLIB
-+
-+config NET_MEDIATEK_MDIO_RT2880
-+ def_bool NET_MEDIATEK_SOC
-+ depends on (NET_MEDIATEK_RT2880 || NET_MEDIATEK_RT3883)
-+ select NET_MEDIATEK_MDIO
-+
-+config NET_MEDIATEK_MDIO_MT7620
-+ def_bool NET_MEDIATEK_SOC
-+ depends on (NET_MEDIATEK_MT7620 || NET_MEDIATEK_MT7621)
-+ select NET_MEDIATEK_MDIO
-+
-+config NET_MEDIATEK_ESW_RT3050
-+ def_tristate NET_MEDIATEK_SOC
-+ depends on NET_MEDIATEK_RT3050
-+
-+config NET_MEDIATEK_GSW_MT7620
-+ def_tristate NET_MEDIATEK_SOC
-+ depends on NET_MEDIATEK_MT7620
-+
-+config NET_MEDIATEK_GSW_MT7621
-+ def_tristate NET_MEDIATEK_SOC
-+ depends on NET_MEDIATEK_MT7621
-+endif
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -0,0 +1,20 @@
-+#
-+# Makefile for the Ralink SoCs built-in ethernet macs
-+#
-+
-+mtk-eth-soc-y += mtk_eth_soc.o ethtool.o
-+
-+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO) += mdio.o
-+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_RT2880) += mdio_rt2880.o
-+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MDIO_MT7620) += mdio_mt7620.o
-+
-+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT2880) += soc_rt2880.o
-+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3050) += soc_rt3050.o
-+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_RT3883) += soc_rt3883.o
-+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620) += soc_mt7620.o
-+mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7621) += soc_mt7621.o
-+
-+obj-$(CONFIG_NET_MEDIATEK_ESW_RT3050) += esw_rt3050.o
-+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o
-+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o
-+obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk-eth-soc.o
diff --git a/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch b/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch
deleted file mode 100644
index 4d5c2d8744..0000000000
--- a/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 6543b4cef96c12903f5ec5c015cd223a6b3c9a33 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 21:16:59 +0100
-Subject: [PATCH 511/513] net: mediatek: add support for the multiphy carrier
- patch
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/mediatek/gsw_mt7620.c | 1 +
- drivers/net/ethernet/mediatek/gsw_mt7620.h | 1 +
- drivers/net/ethernet/mediatek/gsw_mt7621.c | 1 +
- drivers/net/ethernet/mediatek/mdio.c | 1 +
- drivers/net/ethernet/mediatek/mdio_mt7620.c | 12 ++++++++++++
- 5 files changed, 16 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/gsw_mt7620.c
-+++ b/drivers/net/ethernet/mediatek/gsw_mt7620.c
-@@ -54,6 +54,7 @@ static irqreturn_t gsw_interrupt_mt7620(
-
- priv->link[i] = link;
- }
-+ mt7620_handle_carrier(priv);
- mtk_switch_w32(gsw, status, GSW_REG_ISR);
-
- return IRQ_HANDLED;
---- a/drivers/net/ethernet/mediatek/gsw_mt7620.h
-+++ b/drivers/net/ethernet/mediatek/gsw_mt7620.h
-@@ -113,5 +113,6 @@ u32 mt7530_mdio_r32(struct mt7620_gsw *g
- u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr,
- u32 phy_register, u32 write_data);
- u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg);
-+void mt7620_handle_carrier(struct fe_priv *priv);
-
- #endif
---- a/drivers/net/ethernet/mediatek/gsw_mt7621.c
-+++ b/drivers/net/ethernet/mediatek/gsw_mt7621.c
-@@ -60,6 +60,7 @@ static irqreturn_t gsw_interrupt_mt7621(
- }
- }
-
-+ mt7620_handle_carrier(priv);
- mt7530_mdio_w32(gsw, 0x700c, 0x1f);
-
- return IRQ_HANDLED;
---- a/drivers/net/ethernet/mediatek/mdio.c
-+++ b/drivers/net/ethernet/mediatek/mdio.c
-@@ -89,6 +89,7 @@ int fe_connect_phy_node(struct fe_priv *
-
- phydev->supported &= PHY_GBIT_FEATURES;
- phydev->advertising = phydev->supported;
-+ phydev->no_auto_carrier_off = 1;
-
- dev_info(priv->device,
- "connected port %d to PHY at %s [uid=%08x, driver=%s]\n",
---- a/drivers/net/ethernet/mediatek/mdio_mt7620.c
-+++ b/drivers/net/ethernet/mediatek/mdio_mt7620.c
-@@ -137,6 +137,17 @@ int mt7620_has_carrier(struct fe_priv *p
- }
-
-
-+void mt7620_handle_carrier(struct fe_priv *priv)
-+{
-+ if (!priv->phy)
-+ return;
-+
-+ if (mt7620_has_carrier(priv))
-+ netif_carrier_on(priv->netdev);
-+ else
-+ netif_carrier_off(priv->netdev);
-+}
-+
- void mt7620_print_link_state(struct fe_priv *priv, int port, int link,
- int speed, int duplex)
- {
-@@ -153,4 +164,5 @@ void mt7620_mdio_link_adjust(struct fe_p
- mt7620_print_link_state(priv, port, priv->link[port],
- priv->phy->speed[port],
- (priv->phy->duplex[port] == DUPLEX_FULL));
-+ mt7620_handle_carrier(priv);
- }
diff --git a/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch b/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch
deleted file mode 100644
index 5d0072fe1e..0000000000
--- a/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch
+++ /dev/null
@@ -1,901 +0,0 @@
-From 4473f30809eed09037e1932a0c1805172cd997f7 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 22:07:31 +0100
-Subject: [PATCH 512/513] net: mediatek: add swconfig driver for esw_rt3050
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/mediatek/esw_rt3050.c | 805 ++++++++++++++++++++++++++++
- 1 file changed, 805 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/esw_rt3050.c
-+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
-@@ -17,6 +17,8 @@
- #include <linux/platform_device.h>
- #include <asm/mach-ralink/ralink_regs.h>
-
-+#include <linux/switch.h>
-+
- #include "mtk_eth_soc.h"
-
- /* HW limitations for this switch:
-@@ -141,6 +143,8 @@
- #define RT305X_ESW_PORT5 5
- #define RT305X_ESW_PORT6 6
-
-+#define RT305X_ESW_PORTS_NONE 0
-+
- #define RT305X_ESW_PMAP_LLLLLL 0x3f
- #define RT305X_ESW_PMAP_LLLLWL 0x2f
- #define RT305X_ESW_PMAP_WLLLLL 0x3e
-@@ -158,15 +162,51 @@
- #define RT305X_ESW_PORTS_ALL \
- (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
-
-+#define RT305X_ESW_NUM_VLANS 16
-+#define RT305X_ESW_NUM_VIDS 4096
- #define RT305X_ESW_NUM_PORTS 7
-+#define RT305X_ESW_NUM_LANWAN 6
- #define RT305X_ESW_NUM_LEDS 5
-
-+#define RT5350_ESW_REG_PXTPC(_x) (0x150 + (4 * _x))
- #define RT5350_EWS_REG_LED_POLARITY 0x168
- #define RT5350_RESET_EPHY BIT(24)
-
-+enum {
-+ /* Global attributes. */
-+ RT305X_ESW_ATTR_ENABLE_VLAN,
-+ RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
-+ RT305X_ESW_ATTR_BC_STATUS,
-+ RT305X_ESW_ATTR_LED_FREQ,
-+ /* Port attributes. */
-+ RT305X_ESW_ATTR_PORT_DISABLE,
-+ RT305X_ESW_ATTR_PORT_DOUBLETAG,
-+ RT305X_ESW_ATTR_PORT_UNTAG,
-+ RT305X_ESW_ATTR_PORT_LED,
-+ RT305X_ESW_ATTR_PORT_LAN,
-+ RT305X_ESW_ATTR_PORT_RECV_BAD,
-+ RT305X_ESW_ATTR_PORT_RECV_GOOD,
-+ RT5350_ESW_ATTR_PORT_TR_BAD,
-+ RT5350_ESW_ATTR_PORT_TR_GOOD,
-+};
-+
- struct esw_port {
- bool disable;
-+ bool doubletag;
-+ bool untag;
- u8 led;
-+ u16 pvid;
-+};
-+
-+struct esw_vlan {
-+ u8 ports;
-+ u16 vid;
-+};
-+
-+enum {
-+ RT305X_ESW_VLAN_CONFIG_NONE = 0,
-+ RT305X_ESW_VLAN_CONFIG_LLLLW,
-+ RT305X_ESW_VLAN_CONFIG_WLLLL,
- };
-
- struct rt305x_esw {
-@@ -180,6 +220,12 @@ struct rt305x_esw {
- unsigned char port_map;
- unsigned int reg_led_polarity;
-
-+ struct switch_dev swdev;
-+ bool global_vlan_enable;
-+ bool alt_vlan_disable;
-+ int bc_storm_protect;
-+ int led_frequency;
-+ struct esw_vlan vlans[RT305X_ESW_NUM_VLANS];
- struct esw_port ports[RT305X_ESW_NUM_PORTS];
-
- };
-@@ -252,6 +298,71 @@ out:
- return ret;
- }
-
-+static unsigned esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan)
-+{
-+ unsigned s;
-+ unsigned val;
-+
-+ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
-+ val = esw_r32(esw, RT305X_ESW_REG_VLANI(vlan / 2));
-+ val = (val >> s) & RT305X_ESW_VLANI_VID_M;
-+
-+ return val;
-+}
-+
-+static void esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid)
-+{
-+ unsigned s;
-+
-+ s = RT305X_ESW_VLANI_VID_S * (vlan % 2);
-+ esw_rmw(esw,
-+ RT305X_ESW_REG_VLANI(vlan / 2),
-+ RT305X_ESW_VLANI_VID_M << s,
-+ (vid & RT305X_ESW_VLANI_VID_M) << s);
-+}
-+
-+static unsigned esw_get_pvid(struct rt305x_esw *esw, unsigned port)
-+{
-+ unsigned s, val;
-+
-+ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
-+ val = esw_r32(esw, RT305X_ESW_REG_PVIDC(port / 2));
-+ return (val >> s) & RT305X_ESW_PVIDC_PVID_M;
-+}
-+
-+static void esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid)
-+{
-+ unsigned s;
-+
-+ s = RT305X_ESW_PVIDC_PVID_S * (port % 2);
-+ esw_rmw(esw,
-+ RT305X_ESW_REG_PVIDC(port / 2),
-+ RT305X_ESW_PVIDC_PVID_M << s,
-+ (pvid & RT305X_ESW_PVIDC_PVID_M) << s);
-+}
-+
-+static unsigned esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan)
-+{
-+ unsigned s, val;
-+
-+ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
-+ val = esw_r32(esw, RT305X_ESW_REG_VMSC(vlan / 4));
-+ val = (val >> s) & RT305X_ESW_VMSC_MSC_M;
-+
-+ return val;
-+}
-+
-+static void esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc)
-+{
-+ unsigned s;
-+
-+ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4);
-+ esw_rmw(esw,
-+ RT305X_ESW_REG_VMSC(vlan / 4),
-+ RT305X_ESW_VMSC_MSC_M << s,
-+ (msc & RT305X_ESW_VMSC_MSC_M) << s);
-+}
-+
- static unsigned esw_get_port_disable(struct rt305x_esw *esw)
- {
- unsigned reg;
-@@ -261,6 +372,59 @@ static unsigned esw_get_port_disable(str
- RT305X_ESW_POC0_DIS_PORT_M;
- }
-
-+static void esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask)
-+{
-+ unsigned old_mask;
-+ unsigned enable_mask;
-+ unsigned changed;
-+ int i;
-+
-+ old_mask = esw_get_port_disable(esw);
-+ changed = old_mask ^ disable_mask;
-+ enable_mask = old_mask & disable_mask;
-+
-+ /* enable before writing to MII */
-+ esw_rmw(esw, RT305X_ESW_REG_POC0,
-+ (RT305X_ESW_POC0_DIS_PORT_M <<
-+ RT305X_ESW_POC0_DIS_PORT_S),
-+ enable_mask << RT305X_ESW_POC0_DIS_PORT_S);
-+
-+ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) {
-+ if (!(changed & (1 << i)))
-+ continue;
-+ if (disable_mask & (1 << i)) {
-+ /* disable */
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_PDOWN);
-+ } else {
-+ /* enable */
-+ rt305x_mii_write(esw, i, MII_BMCR,
-+ BMCR_FULLDPLX |
-+ BMCR_ANENABLE |
-+ BMCR_ANRESTART |
-+ BMCR_SPEED100);
-+ }
-+ }
-+
-+ /* disable after writing to MII */
-+ esw_rmw(esw, RT305X_ESW_REG_POC0,
-+ (RT305X_ESW_POC0_DIS_PORT_M <<
-+ RT305X_ESW_POC0_DIS_PORT_S),
-+ disable_mask << RT305X_ESW_POC0_DIS_PORT_S);
-+}
-+
-+static void esw_set_gsc(struct rt305x_esw *esw)
-+{
-+ esw_rmw(esw, RT305X_ESW_REG_SGC,
-+ RT305X_ESW_GSC_BC_STROM_MASK << RT305X_ESW_GSC_BC_STROM_SHIFT,
-+ esw->bc_storm_protect << RT305X_ESW_GSC_BC_STROM_SHIFT);
-+ esw_rmw(esw, RT305X_ESW_REG_SGC,
-+ RT305X_ESW_GSC_LED_FREQ_MASK << RT305X_ESW_GSC_LED_FREQ_SHIFT,
-+ esw->led_frequency << RT305X_ESW_GSC_LED_FREQ_SHIFT);
-+}
-+
-+static int esw_apply_config(struct switch_dev *dev);
-+
- static void esw_hw_init(struct rt305x_esw *esw)
- {
- int i;
-@@ -519,6 +683,9 @@ static void esw_hw_init(struct rt305x_es
- for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
- esw->ports[i].led = 0x05;
-
-+ /* Apply the empty config. */
-+ esw_apply_config(&esw->swdev);
-+
- /* Only unmask the port change interrupt */
- esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
- }
-@@ -541,11 +708,629 @@ static irqreturn_t esw_interrupt(int irq
- return IRQ_HANDLED;
- }
-
-+static int esw_apply_config(struct switch_dev *dev)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int i;
-+ u8 disable = 0;
-+ u8 doubletag = 0;
-+ u8 en_vlan = 0;
-+ u8 untag = 0;
-+
-+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+ u32 vid, vmsc;
-+ if (esw->global_vlan_enable) {
-+ vid = esw->vlans[i].vid;
-+ vmsc = esw->vlans[i].ports;
-+ } else {
-+ vid = RT305X_ESW_VLAN_NONE;
-+ vmsc = RT305X_ESW_PORTS_NONE;
-+ }
-+ esw_set_vlan_id(esw, i, vid);
-+ esw_set_vmsc(esw, i, vmsc);
-+ }
-+
-+ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
-+ u32 pvid;
-+ disable |= esw->ports[i].disable << i;
-+ if (esw->global_vlan_enable) {
-+ doubletag |= esw->ports[i].doubletag << i;
-+ en_vlan |= 1 << i;
-+ untag |= esw->ports[i].untag << i;
-+ pvid = esw->ports[i].pvid;
-+ } else {
-+ int x = esw->alt_vlan_disable ? 0 : 1;
-+ doubletag |= x << i;
-+ en_vlan |= x << i;
-+ untag |= x << i;
-+ pvid = 0;
-+ }
-+ esw_set_pvid(esw, i, pvid);
-+ if (i < RT305X_ESW_NUM_LEDS)
-+ esw_w32(esw, esw->ports[i].led,
-+ RT305X_ESW_REG_P0LED + 4*i);
-+ }
-+
-+ esw_set_gsc(esw);
-+ esw_set_port_disable(esw, disable);
-+ esw_rmw(esw, RT305X_ESW_REG_SGC2,
-+ (RT305X_ESW_SGC2_DOUBLE_TAG_M <<
-+ RT305X_ESW_SGC2_DOUBLE_TAG_S),
-+ doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S);
-+ esw_rmw(esw, RT305X_ESW_REG_PFC1,
-+ RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S,
-+ en_vlan << RT305X_ESW_PFC1_EN_VLAN_S);
-+ esw_rmw(esw, RT305X_ESW_REG_POC2,
-+ RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S,
-+ untag << RT305X_ESW_POC2_UNTAG_EN_S);
-+
-+ if (!esw->global_vlan_enable) {
-+ /*
-+ * Still need to put all ports into vlan 0 or they'll be
-+ * isolated.
-+ * NOTE: vlan 0 is special, no vlan tag is prepended
-+ */
-+ esw_set_vlan_id(esw, 0, 0);
-+ esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL);
-+ }
-+
-+ return 0;
-+}
-+
-+static int esw_reset_switch(struct switch_dev *dev)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->global_vlan_enable = 0;
-+ memset(esw->ports, 0, sizeof(esw->ports));
-+ memset(esw->vlans, 0, sizeof(esw->vlans));
-+ esw_hw_init(esw);
-+
-+ return 0;
-+}
-+
-+static int esw_get_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ val->value.i = esw->global_vlan_enable;
-+
-+ return 0;
-+}
-+
-+static int esw_set_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->global_vlan_enable = val->value.i != 0;
-+
-+ return 0;
-+}
-+
-+static int esw_get_alt_vlan_disable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ val->value.i = esw->alt_vlan_disable;
-+
-+ return 0;
-+}
-+
-+static int esw_set_alt_vlan_disable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->alt_vlan_disable = val->value.i != 0;
-+
-+ return 0;
-+}
-+
-+static int
-+rt305x_esw_set_bc_status(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->bc_storm_protect = val->value.i & RT305X_ESW_GSC_BC_STROM_MASK;
-+
-+ return 0;
-+}
-+
-+static int
-+rt305x_esw_get_bc_status(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ val->value.i = esw->bc_storm_protect;
-+
-+ return 0;
-+}
-+
-+static int
-+rt305x_esw_set_led_freq(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ esw->led_frequency = val->value.i & RT305X_ESW_GSC_LED_FREQ_MASK;
-+
-+ return 0;
-+}
-+
-+static int
-+rt305x_esw_get_led_freq(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ val->value.i = esw->led_frequency;
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_link(struct switch_dev *dev,
-+ int port,
-+ struct switch_port_link *link)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ u32 speed, poa;
-+
-+ if (port < 0 || port >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ poa = esw_r32(esw, RT305X_ESW_REG_POA) >> port;
-+
-+ link->link = (poa >> RT305X_ESW_LINK_S) & 1;
-+ link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1;
-+ if (port < RT305X_ESW_NUM_LEDS) {
-+ speed = (poa >> RT305X_ESW_SPD_S) & 1;
-+ } else {
-+ if (port == RT305X_ESW_NUM_PORTS - 1)
-+ poa >>= 1;
-+ speed = (poa >> RT305X_ESW_SPD_S) & 3;
-+ }
-+ switch (speed) {
-+ case 0:
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ break;
-+ case 1:
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ break;
-+ case 2:
-+ case 3: /* forced gige speed can be 2 or 3 */
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+ break;
-+ default:
-+ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_bool(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+ u32 x, reg, shift;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ switch (attr->id) {
-+ case RT305X_ESW_ATTR_PORT_DISABLE:
-+ reg = RT305X_ESW_REG_POC0;
-+ shift = RT305X_ESW_POC0_DIS_PORT_S;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
-+ reg = RT305X_ESW_REG_SGC2;
-+ shift = RT305X_ESW_SGC2_DOUBLE_TAG_S;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_UNTAG:
-+ reg = RT305X_ESW_REG_POC2;
-+ shift = RT305X_ESW_POC2_UNTAG_EN_S;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_LAN:
-+ reg = RT305X_ESW_REG_SGC2;
-+ shift = RT305X_ESW_SGC2_LAN_PMAP_S;
-+ if (idx >= RT305X_ESW_NUM_LANWAN)
-+ return -EINVAL;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ x = esw_r32(esw, reg);
-+ val->value.i = (x >> (idx + shift)) & 1;
-+
-+ return 0;
-+}
-+
-+static int esw_set_port_bool(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
-+ val->value.i < 0 || val->value.i > 1)
-+ return -EINVAL;
-+
-+ switch (attr->id) {
-+ case RT305X_ESW_ATTR_PORT_DISABLE:
-+ esw->ports[idx].disable = val->value.i;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_DOUBLETAG:
-+ esw->ports[idx].doubletag = val->value.i;
-+ break;
-+ case RT305X_ESW_ATTR_PORT_UNTAG:
-+ esw->ports[idx].untag = val->value.i;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_recv_badgood(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+ int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16;
-+ u32 reg;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
-+ return -EINVAL;
-+ reg = esw_r32(esw, RT305X_ESW_REG_PXPC(idx));
-+ val->value.i = (reg >> shift) & 0xffff;
-+
-+ return 0;
-+}
-+
-+static int
-+esw_get_port_tr_badgood(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ int idx = val->port_vlan;
-+ int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
-+ u32 reg;
-+
-+ if ((ralink_soc != RT305X_SOC_RT5350) && (ralink_soc != MT762X_SOC_MT7628AN) && (ralink_soc != MT762X_SOC_MT7688))
-+ return -EINVAL;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
-+ return -EINVAL;
-+
-+ reg = esw_r32(esw, RT5350_ESW_REG_PXTPC(idx));
-+ val->value.i = (reg >> shift) & 0xffff;
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_led(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS ||
-+ idx >= RT305X_ESW_NUM_LEDS)
-+ return -EINVAL;
-+
-+ val->value.i = esw_r32(esw, RT305X_ESW_REG_P0LED + 4*idx);
-+
-+ return 0;
-+}
-+
-+static int esw_set_port_led(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int idx = val->port_vlan;
-+
-+ if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS)
-+ return -EINVAL;
-+
-+ esw->ports[idx].led = val->value.i;
-+
-+ return 0;
-+}
-+
-+static int esw_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ if (port >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ *val = esw_get_pvid(esw, port);
-+
-+ return 0;
-+}
-+
-+static int esw_set_port_pvid(struct switch_dev *dev, int port, int val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+
-+ if (port >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ esw->ports[port].pvid = val;
-+
-+ return 0;
-+}
-+
-+static int esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ u32 vmsc, poc2;
-+ int vlan_idx = -1;
-+ int i;
-+
-+ val->len = 0;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS)
-+ return -EINVAL;
-+
-+ /* valid vlan? */
-+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+ if (esw_get_vlan_id(esw, i) == val->port_vlan &&
-+ esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) {
-+ vlan_idx = i;
-+ break;
-+ }
-+ }
-+
-+ if (vlan_idx == -1)
-+ return -EINVAL;
-+
-+ vmsc = esw_get_vmsc(esw, vlan_idx);
-+ poc2 = esw_r32(esw, RT305X_ESW_REG_POC2);
-+
-+ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) {
-+ struct switch_port *p;
-+ int port_mask = 1 << i;
-+
-+ if (!(vmsc & port_mask))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+ if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S))
-+ p->flags = 0;
-+ else
-+ p->flags = 1 << SWITCH_PORT_FLAG_TAGGED;
-+ }
-+
-+ return 0;
-+}
-+
-+static int esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev);
-+ int ports;
-+ int vlan_idx = -1;
-+ int i;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS ||
-+ val->len > RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ /* one of the already defined vlans? */
-+ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) {
-+ if (esw->vlans[i].vid == val->port_vlan &&
-+ esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) {
-+ vlan_idx = i;
-+ break;
-+ }
-+ }
-+
-+ /* select a free slot */
-+ for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) {
-+ if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE)
-+ vlan_idx = i;
-+ }
-+
-+ /* bail if all slots are in use */
-+ if (vlan_idx == -1)
-+ return -EINVAL;
-+
-+ ports = RT305X_ESW_PORTS_NONE;
-+ for (i = 0; i < val->len; i++) {
-+ struct switch_port *p = &val->value.ports[i];
-+ int port_mask = 1 << p->id;
-+ bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED));
-+
-+ if (p->id >= RT305X_ESW_NUM_PORTS)
-+ return -EINVAL;
-+
-+ ports |= port_mask;
-+ esw->ports[p->id].untag = untagged;
-+ }
-+ esw->vlans[vlan_idx].ports = ports;
-+ if (ports == RT305X_ESW_PORTS_NONE)
-+ esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE;
-+ else
-+ esw->vlans[vlan_idx].vid = val->port_vlan;
-+
-+ return 0;
-+}
-+
-+static const struct switch_attr esw_global[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable_vlan",
-+ .description = "VLAN mode (1:enabled)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_ENABLE_VLAN,
-+ .get = esw_get_vlan_enable,
-+ .set = esw_set_vlan_enable,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "alternate_vlan_disable",
-+ .description = "Use en_vlan instead of doubletag to disable"
-+ " VLAN mode",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE,
-+ .get = esw_get_alt_vlan_disable,
-+ .set = esw_set_alt_vlan_disable,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "bc_storm_protect",
-+ .description = "Global broadcast storm protection (0:Disable, 1:64 blocks, 2:96 blocks, 3:128 blocks)",
-+ .max = 3,
-+ .id = RT305X_ESW_ATTR_BC_STATUS,
-+ .get = rt305x_esw_get_bc_status,
-+ .set = rt305x_esw_set_bc_status,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "led_frequency",
-+ .description = "LED Flash frequency (0:30mS, 1:60mS, 2:240mS, 3:480mS)",
-+ .max = 3,
-+ .id = RT305X_ESW_ATTR_LED_FREQ,
-+ .get = rt305x_esw_get_led_freq,
-+ .set = rt305x_esw_set_led_freq,
-+ }
-+};
-+
-+static const struct switch_attr esw_port[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "disable",
-+ .description = "Port state (1:disabled)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_PORT_DISABLE,
-+ .get = esw_get_port_bool,
-+ .set = esw_set_port_bool,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "doubletag",
-+ .description = "Double tagging for incoming vlan packets "
-+ "(1:enabled)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_PORT_DOUBLETAG,
-+ .get = esw_get_port_bool,
-+ .set = esw_set_port_bool,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "untag",
-+ .description = "Untag (1:strip outgoing vlan tag)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_PORT_UNTAG,
-+ .get = esw_get_port_bool,
-+ .set = esw_set_port_bool,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "led",
-+ .description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity,"
-+ " 4:collision, 5:linkact, 6:duplcoll, 7:10mact,"
-+ " 8:100mact, 10:blink, 11:off, 12:on)",
-+ .max = 15,
-+ .id = RT305X_ESW_ATTR_PORT_LED,
-+ .get = esw_get_port_led,
-+ .set = esw_set_port_led,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "lan",
-+ .description = "HW port group (0:wan, 1:lan)",
-+ .max = 1,
-+ .id = RT305X_ESW_ATTR_PORT_LAN,
-+ .get = esw_get_port_bool,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "recv_bad",
-+ .description = "Receive bad packet counter",
-+ .id = RT305X_ESW_ATTR_PORT_RECV_BAD,
-+ .get = esw_get_port_recv_badgood,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "recv_good",
-+ .description = "Receive good packet counter",
-+ .id = RT305X_ESW_ATTR_PORT_RECV_GOOD,
-+ .get = esw_get_port_recv_badgood,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "tr_bad",
-+
-+ .description = "Transmit bad packet counter. rt5350 only",
-+ .id = RT5350_ESW_ATTR_PORT_TR_BAD,
-+ .get = esw_get_port_tr_badgood,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "tr_good",
-+
-+ .description = "Transmit good packet counter. rt5350 only",
-+ .id = RT5350_ESW_ATTR_PORT_TR_GOOD,
-+ .get = esw_get_port_tr_badgood,
-+ },
-+};
-+
-+static const struct switch_attr esw_vlan[] = {
-+};
-+
-+static const struct switch_dev_ops esw_ops = {
-+ .attr_global = {
-+ .attr = esw_global,
-+ .n_attr = ARRAY_SIZE(esw_global),
-+ },
-+ .attr_port = {
-+ .attr = esw_port,
-+ .n_attr = ARRAY_SIZE(esw_port),
-+ },
-+ .attr_vlan = {
-+ .attr = esw_vlan,
-+ .n_attr = ARRAY_SIZE(esw_vlan),
-+ },
-+ .get_vlan_ports = esw_get_vlan_ports,
-+ .set_vlan_ports = esw_set_vlan_ports,
-+ .get_port_pvid = esw_get_port_pvid,
-+ .set_port_pvid = esw_set_port_pvid,
-+ .get_port_link = esw_get_port_link,
-+ .apply_config = esw_apply_config,
-+ .reset_switch = esw_reset_switch,
-+};
-+
- static int esw_probe(struct platform_device *pdev)
- {
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct device_node *np = pdev->dev.of_node;
- const __be32 *port_map, *reg_init;
-+ struct switch_dev *swdev;
- struct rt305x_esw *esw;
- struct resource *irq;
- int ret;
-@@ -568,6 +1353,21 @@ static int esw_probe(struct platform_dev
- if (reg_init)
- esw->reg_led_polarity = be32_to_cpu(*reg_init);
-
-+ swdev = &esw->swdev;
-+ swdev->of_node = pdev->dev.of_node;
-+ swdev->name = "rt305x-esw";
-+ swdev->alias = "rt305x";
-+ swdev->cpu_port = RT305X_ESW_PORT6;
-+ swdev->ports = RT305X_ESW_NUM_PORTS;
-+ swdev->vlans = RT305X_ESW_NUM_VIDS;
-+ swdev->ops = &esw_ops;
-+
-+ ret = register_switch(swdev, NULL);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "register_switch failed\n");
-+ goto unmap_base;
-+ }
-+
- platform_set_drvdata(pdev, esw);
-
- spin_lock_init(&esw->reg_rw_lock);
-@@ -583,6 +1383,11 @@ static int esw_probe(struct platform_dev
- }
-
- return ret;
-+
-+unmap_base:
-+ iounmap(esw->base);
-+ kfree(esw);
-+ return ret;
- }
-
- static int esw_remove(struct platform_device *pdev)
diff --git a/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch b/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch
deleted file mode 100644
index bbad8cc523..0000000000
--- a/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch
+++ /dev/null
@@ -1,896 +0,0 @@
-From cf5a08f1f16913da8bb24a96afaa2969b29d0827 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 14 Dec 2015 22:25:57 +0100
-Subject: [PATCH 513/513] net: mediatek: add swconfig driver for gsw_mt762x
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/mediatek/Makefile | 4 +-
- drivers/net/ethernet/mediatek/mt7530.c | 804 +++++++++++++++++++++++++++
- drivers/net/ethernet/mediatek/mt7530.h | 20 +
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 9 +-
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
- drivers/net/ethernet/mediatek/soc_mt7620.c | 1 +
- 6 files changed, 835 insertions(+), 4 deletions(-)
- create mode 100644 drivers/net/ethernet/mediatek/mt7530.c
- create mode 100644 drivers/net/ethernet/mediatek/mt7530.h
-
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -15,6 +15,6 @@ mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620
- mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7621) += soc_mt7621.o
-
- obj-$(CONFIG_NET_MEDIATEK_ESW_RT3050) += esw_rt3050.o
--obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o
--obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o
-+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o mt7530.o
-+obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o mt7530.o
- obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk-eth-soc.o
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mt7530.c
-@@ -0,0 +1,804 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/if.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/if_ether.h>
-+#include <linux/skbuff.h>
-+#include <linux/netdevice.h>
-+#include <linux/netlink.h>
-+#include <linux/bitops.h>
-+#include <net/genetlink.h>
-+#include <linux/switch.h>
-+#include <linux/delay.h>
-+#include <linux/phy.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/lockdep.h>
-+#include <linux/workqueue.h>
-+#include <linux/of_device.h>
-+
-+#include "mt7530.h"
-+
-+#define MT7530_CPU_PORT 6
-+#define MT7530_NUM_PORTS 8
-+#define MT7530_NUM_VLANS 16
-+#define MT7530_MAX_VID 4095
-+#define MT7530_MIN_VID 0
-+
-+/* registers */
-+#define REG_ESW_VLAN_VTCR 0x90
-+#define REG_ESW_VLAN_VAWD1 0x94
-+#define REG_ESW_VLAN_VAWD2 0x98
-+#define REG_ESW_VLAN_VTIM(x) (0x100 + 4 * ((x) / 2))
-+
-+#define REG_ESW_VLAN_VAWD1_IVL_MAC BIT(30)
-+#define REG_ESW_VLAN_VAWD1_VTAG_EN BIT(28)
-+#define REG_ESW_VLAN_VAWD1_VALID BIT(0)
-+
-+/* vlan egress mode */
-+enum {
-+ ETAG_CTRL_UNTAG = 0,
-+ ETAG_CTRL_TAG = 2,
-+ ETAG_CTRL_SWAP = 1,
-+ ETAG_CTRL_STACK = 3,
-+};
-+
-+#define REG_ESW_PORT_PCR(x) (0x2004 | ((x) << 8))
-+#define REG_ESW_PORT_PVC(x) (0x2010 | ((x) << 8))
-+#define REG_ESW_PORT_PPBV1(x) (0x2014 | ((x) << 8))
-+
-+#define REG_HWTRAP 0x7804
-+
-+#define MIB_DESC(_s , _o, _n) \
-+ { \
-+ .size = (_s), \
-+ .offset = (_o), \
-+ .name = (_n), \
-+ }
-+
-+struct mt7xxx_mib_desc {
-+ unsigned int size;
-+ unsigned int offset;
-+ const char *name;
-+};
-+
-+#define MT7621_MIB_COUNTER_BASE 0x4000
-+#define MT7621_MIB_COUNTER_PORT_OFFSET 0x100
-+#define MT7621_STATS_TDPC 0x00
-+#define MT7621_STATS_TCRC 0x04
-+#define MT7621_STATS_TUPC 0x08
-+#define MT7621_STATS_TMPC 0x0C
-+#define MT7621_STATS_TBPC 0x10
-+#define MT7621_STATS_TCEC 0x14
-+#define MT7621_STATS_TSCEC 0x18
-+#define MT7621_STATS_TMCEC 0x1C
-+#define MT7621_STATS_TDEC 0x20
-+#define MT7621_STATS_TLCEC 0x24
-+#define MT7621_STATS_TXCEC 0x28
-+#define MT7621_STATS_TPPC 0x2C
-+#define MT7621_STATS_TL64PC 0x30
-+#define MT7621_STATS_TL65PC 0x34
-+#define MT7621_STATS_TL128PC 0x38
-+#define MT7621_STATS_TL256PC 0x3C
-+#define MT7621_STATS_TL512PC 0x40
-+#define MT7621_STATS_TL1024PC 0x44
-+#define MT7621_STATS_TOC 0x48
-+#define MT7621_STATS_RDPC 0x60
-+#define MT7621_STATS_RFPC 0x64
-+#define MT7621_STATS_RUPC 0x68
-+#define MT7621_STATS_RMPC 0x6C
-+#define MT7621_STATS_RBPC 0x70
-+#define MT7621_STATS_RAEPC 0x74
-+#define MT7621_STATS_RCEPC 0x78
-+#define MT7621_STATS_RUSPC 0x7C
-+#define MT7621_STATS_RFEPC 0x80
-+#define MT7621_STATS_ROSPC 0x84
-+#define MT7621_STATS_RJEPC 0x88
-+#define MT7621_STATS_RPPC 0x8C
-+#define MT7621_STATS_RL64PC 0x90
-+#define MT7621_STATS_RL65PC 0x94
-+#define MT7621_STATS_RL128PC 0x98
-+#define MT7621_STATS_RL256PC 0x9C
-+#define MT7621_STATS_RL512PC 0xA0
-+#define MT7621_STATS_RL1024PC 0xA4
-+#define MT7621_STATS_ROC 0xA8
-+#define MT7621_STATS_RDPC_CTRL 0xB0
-+#define MT7621_STATS_RDPC_ING 0xB4
-+#define MT7621_STATS_RDPC_ARL 0xB8
-+
-+static const struct mt7xxx_mib_desc mt7621_mibs[] = {
-+ MIB_DESC(1, MT7621_STATS_TDPC, "TxDrop"),
-+ MIB_DESC(1, MT7621_STATS_TCRC, "TxCRC"),
-+ MIB_DESC(1, MT7621_STATS_TUPC, "TxUni"),
-+ MIB_DESC(1, MT7621_STATS_TMPC, "TxMulti"),
-+ MIB_DESC(1, MT7621_STATS_TBPC, "TxBroad"),
-+ MIB_DESC(1, MT7621_STATS_TCEC, "TxCollision"),
-+ MIB_DESC(1, MT7621_STATS_TSCEC, "TxSingleCol"),
-+ MIB_DESC(1, MT7621_STATS_TMCEC, "TxMultiCol"),
-+ MIB_DESC(1, MT7621_STATS_TDEC, "TxDefer"),
-+ MIB_DESC(1, MT7621_STATS_TLCEC, "TxLateCol"),
-+ MIB_DESC(1, MT7621_STATS_TXCEC, "TxExcCol"),
-+ MIB_DESC(1, MT7621_STATS_TPPC, "TxPause"),
-+ MIB_DESC(1, MT7621_STATS_TL64PC, "Tx64Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL65PC, "Tx65Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL128PC, "Tx128Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL256PC, "Tx256Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL512PC, "Tx512Byte"),
-+ MIB_DESC(1, MT7621_STATS_TL1024PC, "Tx1024Byte"),
-+ MIB_DESC(2, MT7621_STATS_TOC, "TxByte"),
-+ MIB_DESC(1, MT7621_STATS_RDPC, "RxDrop"),
-+ MIB_DESC(1, MT7621_STATS_RFPC, "RxFiltered"),
-+ MIB_DESC(1, MT7621_STATS_RUPC, "RxUni"),
-+ MIB_DESC(1, MT7621_STATS_RMPC, "RxMulti"),
-+ MIB_DESC(1, MT7621_STATS_RBPC, "RxBroad"),
-+ MIB_DESC(1, MT7621_STATS_RAEPC, "RxAlignErr"),
-+ MIB_DESC(1, MT7621_STATS_RCEPC, "RxCRC"),
-+ MIB_DESC(1, MT7621_STATS_RUSPC, "RxUnderSize"),
-+ MIB_DESC(1, MT7621_STATS_RFEPC, "RxFragment"),
-+ MIB_DESC(1, MT7621_STATS_ROSPC, "RxOverSize"),
-+ MIB_DESC(1, MT7621_STATS_RJEPC, "RxJabber"),
-+ MIB_DESC(1, MT7621_STATS_RPPC, "RxPause"),
-+ MIB_DESC(1, MT7621_STATS_RL64PC, "Rx64Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL65PC, "Rx65Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL128PC, "Rx128Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL256PC, "Rx256Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL512PC, "Rx512Byte"),
-+ MIB_DESC(1, MT7621_STATS_RL1024PC, "Rx1024Byte"),
-+ MIB_DESC(2, MT7621_STATS_ROC, "RxByte"),
-+ MIB_DESC(1, MT7621_STATS_RDPC_CTRL, "RxCtrlDrop"),
-+ MIB_DESC(1, MT7621_STATS_RDPC_ING, "RxIngDrop"),
-+ MIB_DESC(1, MT7621_STATS_RDPC_ARL, "RxARLDrop")
-+};
-+
-+enum {
-+ /* Global attributes. */
-+ MT7530_ATTR_ENABLE_VLAN,
-+};
-+
-+struct mt7530_port_entry {
-+ u16 pvid;
-+};
-+
-+struct mt7530_vlan_entry {
-+ u16 vid;
-+ u8 member;
-+ u8 etags;
-+};
-+
-+struct mt7530_priv {
-+ void __iomem *base;
-+ struct mii_bus *bus;
-+ struct switch_dev swdev;
-+
-+ bool global_vlan_enable;
-+ struct mt7530_vlan_entry vlan_entries[MT7530_NUM_VLANS];
-+ struct mt7530_port_entry port_entries[MT7530_NUM_PORTS];
-+};
-+
-+struct mt7530_mapping {
-+ char *name;
-+ u16 pvids[MT7530_NUM_PORTS];
-+ u8 members[MT7530_NUM_VLANS];
-+ u8 etags[MT7530_NUM_VLANS];
-+ u16 vids[MT7530_NUM_VLANS];
-+} mt7530_defaults[] = {
-+ {
-+ .name = "llllw",
-+ .pvids = { 1, 1, 1, 1, 2, 1, 1 },
-+ .members = { 0, 0x6f, 0x50 },
-+ .etags = { 0, 0x40, 0x40 },
-+ .vids = { 0, 1, 2 },
-+ }, {
-+ .name = "wllll",
-+ .pvids = { 2, 1, 1, 1, 1, 1, 1 },
-+ .members = { 0, 0x7e, 0x41 },
-+ .etags = { 0, 0x40, 0x40 },
-+ .vids = { 0, 1, 2 },
-+ },
-+};
-+
-+struct mt7530_mapping*
-+mt7530_find_mapping(struct device_node *np)
-+{
-+ const char *map;
-+ int i;
-+
-+ if (of_property_read_string(np, "mediatek,portmap", &map))
-+ return NULL;
-+
-+ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++)
-+ if (!strcmp(map, mt7530_defaults[i].name))
-+ return &mt7530_defaults[i];
-+
-+ return NULL;
-+}
-+
-+static void
-+mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map)
-+{
-+ int i = 0;
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530->port_entries[i].pvid = map->pvids[i];
-+
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ mt7530->vlan_entries[i].member = map->members[i];
-+ mt7530->vlan_entries[i].etags = map->etags[i];
-+ mt7530->vlan_entries[i].vid = map->vids[i];
-+ }
-+}
-+
-+static int
-+mt7530_reset_switch(struct switch_dev *dev)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ int i;
-+
-+ memset(priv->port_entries, 0, sizeof(priv->port_entries));
-+ memset(priv->vlan_entries, 0, sizeof(priv->vlan_entries));
-+
-+ /* set default vid of each vlan to the same number of vlan, so the vid
-+ * won't need be set explicitly.
-+ */
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ priv->vlan_entries[i].vid = i;
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+
-+ val->value.i = priv->global_vlan_enable;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vlan_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+
-+ priv->global_vlan_enable = val->value.i != 0;
-+
-+ return 0;
-+}
-+
-+static u32
-+mt7530_r32(struct mt7530_priv *priv, u32 reg)
-+{
-+ u32 val;
-+ if (priv->bus) {
-+ u16 high, low;
-+
-+ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ low = mdiobus_read(priv->bus, 0x1f, (reg >> 2) & 0xf);
-+ high = mdiobus_read(priv->bus, 0x1f, 0x10);
-+
-+ return (high << 16) | (low & 0xffff);
-+ }
-+
-+ val = ioread32(priv->base + reg);
-+ pr_debug("MT7530 MDIO Read [%04x]=%08x\n", reg, val);
-+
-+ return val;
-+}
-+
-+static void
-+mt7530_w32(struct mt7530_priv *priv, u32 reg, u32 val)
-+{
-+ if (priv->bus) {
-+ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff);
-+ mdiobus_write(priv->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff);
-+ mdiobus_write(priv->bus, 0x1f, 0x10, val >> 16);
-+ return;
-+ }
-+
-+ pr_debug("MT7530 MDIO Write[%04x]=%08x\n", reg, val);
-+ iowrite32(val, priv->base + reg);
-+}
-+
-+static void
-+mt7530_vtcr(struct mt7530_priv *priv, u32 cmd, u32 val)
-+{
-+ int i;
-+
-+ mt7530_w32(priv, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val);
-+
-+ for (i = 0; i < 20; i++) {
-+ u32 val = mt7530_r32(priv, REG_ESW_VLAN_VTCR);
-+
-+ if ((val & BIT(31)) == 0)
-+ break;
-+
-+ udelay(1000);
-+ }
-+ if (i == 20)
-+ printk("mt7530: vtcr timeout\n");
-+}
-+
-+static int
-+mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+
-+ if (port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ *val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(port));
-+ *val &= 0xfff;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+
-+ if (port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ if (pvid < MT7530_MIN_VID || pvid > MT7530_MAX_VID)
-+ return -EINVAL;
-+
-+ priv->port_entries[port].pvid = pvid;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ u32 member;
-+ u32 etags;
-+ int i;
-+
-+ val->len = 0;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS)
-+ return -EINVAL;
-+
-+ mt7530_vtcr(priv, 0, val->port_vlan);
-+
-+ member = mt7530_r32(priv, REG_ESW_VLAN_VAWD1);
-+ member >>= 16;
-+ member &= 0xff;
-+
-+ etags = mt7530_r32(priv, REG_ESW_VLAN_VAWD2);
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ struct switch_port *p;
-+ int etag;
-+
-+ if (!(member & BIT(i)))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+
-+ etag = (etags >> (i * 2)) & 0x3;
-+
-+ if (etag == ETAG_CTRL_TAG)
-+ p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED);
-+ else if (etag != ETAG_CTRL_UNTAG)
-+ printk("vlan egress tag control neither untag nor tag.\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ u8 member = 0;
-+ u8 etags = 0;
-+ int i;
-+
-+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS ||
-+ val->len > MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ for (i = 0; i < val->len; i++) {
-+ struct switch_port *p = &val->value.ports[i];
-+
-+ if (p->id >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ member |= BIT(p->id);
-+
-+ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED))
-+ etags |= BIT(p->id);
-+ }
-+ priv->vlan_entries[val->port_vlan].member = member;
-+ priv->vlan_entries[val->port_vlan].etags = etags;
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ int vlan;
-+ u16 vid;
-+
-+ vlan = val->port_vlan;
-+ vid = (u16)val->value.i;
-+
-+ if (vlan < 0 || vlan >= MT7530_NUM_VLANS)
-+ return -EINVAL;
-+
-+ if (vid < MT7530_MIN_VID || vid > MT7530_MAX_VID)
-+ return -EINVAL;
-+
-+ priv->vlan_entries[vlan].vid = vid;
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ u32 vid;
-+ int vlan;
-+
-+ vlan = val->port_vlan;
-+
-+ vid = mt7530_r32(priv, REG_ESW_VLAN_VTIM(vlan));
-+ if (vlan & 1)
-+ vid = vid >> 12;
-+ vid &= 0xfff;
-+
-+ val->value.i = vid;
-+ return 0;
-+}
-+
-+static int
-+mt7530_apply_config(struct switch_dev *dev)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ int i, j;
-+ u8 tag_ports;
-+ u8 untag_ports;
-+
-+ if (!priv->global_vlan_enable) {
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0000);
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x810000c0);
-+
-+ return 0;
-+ }
-+
-+ /* set all ports as security mode */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++)
-+ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0003);
-+
-+ /* check if a port is used in tag/untag vlan egress mode */
-+ tag_ports = 0;
-+ untag_ports = 0;
-+
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ u8 member = priv->vlan_entries[i].member;
-+ u8 etags = priv->vlan_entries[i].etags;
-+
-+ if (!member)
-+ continue;
-+
-+ for (j = 0; j < MT7530_NUM_PORTS; j++) {
-+ if (!(member & BIT(j)))
-+ continue;
-+
-+ if (etags & BIT(j))
-+ tag_ports |= 1u << j;
-+ else
-+ untag_ports |= 1u << j;
-+ }
-+ }
-+
-+ /* set all untag-only ports as transparent and the rest as user port */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ u32 pvc_mode = 0x81000000;
-+
-+ if (untag_ports & BIT(i) && !(tag_ports & BIT(i)))
-+ pvc_mode = 0x810000c0;
-+
-+ mt7530_w32(priv, REG_ESW_PORT_PVC(i), pvc_mode);
-+ }
-+
-+ for (i = 0; i < MT7530_NUM_VLANS; i++) {
-+ u16 vid = priv->vlan_entries[i].vid;
-+ u8 member = priv->vlan_entries[i].member;
-+ u8 etags = priv->vlan_entries[i].etags;
-+ u32 val;
-+
-+ /* vid of vlan */
-+ val = mt7530_r32(priv, REG_ESW_VLAN_VTIM(i));
-+ if (i % 2 == 0) {
-+ val &= 0xfff000;
-+ val |= vid;
-+ } else {
-+ val &= 0xfff;
-+ val |= (vid << 12);
-+ }
-+ mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val);
-+
-+ /* vlan port membership */
-+ if (member)
-+ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC |
-+ REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) |
-+ REG_ESW_VLAN_VAWD1_VALID);
-+ else
-+ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0);
-+
-+ /* egress mode */
-+ val = 0;
-+ for (j = 0; j < MT7530_NUM_PORTS; j++) {
-+ if (etags & BIT(j))
-+ val |= ETAG_CTRL_TAG << (j * 2);
-+ else
-+ val |= ETAG_CTRL_UNTAG << (j * 2);
-+ }
-+ mt7530_w32(priv, REG_ESW_VLAN_VAWD2, val);
-+
-+ /* write to vlan table */
-+ mt7530_vtcr(priv, 1, i);
-+ }
-+
-+ /* Port Default PVID */
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ u32 val;
-+ val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(i));
-+ val &= ~0xfff;
-+ val |= priv->port_entries[i].pvid;
-+ mt7530_w32(priv, REG_ESW_PORT_PPBV1(i), val);
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7530_get_port_link(struct switch_dev *dev, int port,
-+ struct switch_port_link *link)
-+{
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ u32 speed, pmsr;
-+
-+ if (port < 0 || port >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ pmsr = mt7530_r32(priv, 0x3008 + (0x100 * port));
-+
-+ link->link = pmsr & 1;
-+ link->duplex = (pmsr >> 1) & 1;
-+ speed = (pmsr >> 2) & 3;
-+
-+ switch (speed) {
-+ case 0:
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ break;
-+ case 1:
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ break;
-+ case 2:
-+ case 3: /* forced gige speed can be 2 or 3 */
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+ break;
-+ default:
-+ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct switch_attr mt7530_global[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable_vlan",
-+ .description = "VLAN mode (1:enabled)",
-+ .max = 1,
-+ .id = MT7530_ATTR_ENABLE_VLAN,
-+ .get = mt7530_get_vlan_enable,
-+ .set = mt7530_set_vlan_enable,
-+ },
-+};
-+
-+static u64 get_mib_counter(struct mt7530_priv *priv, int i, int port)
-+{
-+ unsigned int port_base;
-+ u64 t;
-+
-+ port_base = MT7621_MIB_COUNTER_BASE +
-+ MT7621_MIB_COUNTER_PORT_OFFSET * port;
-+
-+ t = mt7530_r32(priv, port_base + mt7621_mibs[i].offset);
-+ if (mt7621_mibs[i].size == 2) {
-+ u64 hi;
-+
-+ hi = mt7530_r32(priv, port_base + mt7621_mibs[i].offset + 4);
-+ t |= hi << 32;
-+ }
-+
-+ return t;
-+}
-+
-+static int mt7621_sw_get_port_mib(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ static char buf[4096];
-+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev);
-+ int i, len = 0;
-+
-+ if (val->port_vlan >= MT7530_NUM_PORTS)
-+ return -EINVAL;
-+
-+ len += snprintf(buf + len, sizeof(buf) - len,
-+ "Port %d MIB counters\n", val->port_vlan);
-+
-+ for (i = 0; i < sizeof(mt7621_mibs) / sizeof(*mt7621_mibs); ++i) {
-+ u64 counter;
-+ len += snprintf(buf + len, sizeof(buf) - len,
-+ "%-11s: ", mt7621_mibs[i].name);
-+ counter = get_mib_counter(priv, i, val->port_vlan);
-+ len += snprintf(buf + len, sizeof(buf) - len, "%llu\n",
-+ counter);
-+ }
-+
-+ val->value.s = buf;
-+ val->len = len;
-+ return 0;
-+}
-+
-+static const struct switch_attr mt7621_port[] = {
-+ {
-+ .type = SWITCH_TYPE_STRING,
-+ .name = "mib",
-+ .description = "Get MIB counters for port",
-+ .get = mt7621_sw_get_port_mib,
-+ .set = NULL,
-+ },
-+};
-+
-+static const struct switch_attr mt7530_port[] = {
-+};
-+
-+static const struct switch_attr mt7530_vlan[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "vid",
-+ .description = "VLAN ID (0-4094)",
-+ .set = mt7530_set_vid,
-+ .get = mt7530_get_vid,
-+ .max = 4094,
-+ },
-+};
-+
-+static const struct switch_dev_ops mt7621_ops = {
-+ .attr_global = {
-+ .attr = mt7530_global,
-+ .n_attr = ARRAY_SIZE(mt7530_global),
-+ },
-+ .attr_port = {
-+ .attr = mt7621_port,
-+ .n_attr = ARRAY_SIZE(mt7621_port),
-+ },
-+ .attr_vlan = {
-+ .attr = mt7530_vlan,
-+ .n_attr = ARRAY_SIZE(mt7530_vlan),
-+ },
-+ .get_vlan_ports = mt7530_get_vlan_ports,
-+ .set_vlan_ports = mt7530_set_vlan_ports,
-+ .get_port_pvid = mt7530_get_port_pvid,
-+ .set_port_pvid = mt7530_set_port_pvid,
-+ .get_port_link = mt7530_get_port_link,
-+ .apply_config = mt7530_apply_config,
-+ .reset_switch = mt7530_reset_switch,
-+};
-+
-+static const struct switch_dev_ops mt7530_ops = {
-+ .attr_global = {
-+ .attr = mt7530_global,
-+ .n_attr = ARRAY_SIZE(mt7530_global),
-+ },
-+ .attr_port = {
-+ .attr = mt7530_port,
-+ .n_attr = ARRAY_SIZE(mt7530_port),
-+ },
-+ .attr_vlan = {
-+ .attr = mt7530_vlan,
-+ .n_attr = ARRAY_SIZE(mt7530_vlan),
-+ },
-+ .get_vlan_ports = mt7530_get_vlan_ports,
-+ .set_vlan_ports = mt7530_set_vlan_ports,
-+ .get_port_pvid = mt7530_get_port_pvid,
-+ .set_port_pvid = mt7530_set_port_pvid,
-+ .get_port_link = mt7530_get_port_link,
-+ .apply_config = mt7530_apply_config,
-+ .reset_switch = mt7530_reset_switch,
-+};
-+
-+int
-+mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan)
-+{
-+ struct switch_dev *swdev;
-+ struct mt7530_priv *mt7530;
-+ struct mt7530_mapping *map;
-+ int ret;
-+
-+ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL);
-+ if (!mt7530)
-+ return -ENOMEM;
-+
-+ mt7530->base = base;
-+ mt7530->bus = bus;
-+ mt7530->global_vlan_enable = vlan;
-+
-+ swdev = &mt7530->swdev;
-+ if (bus) {
-+ swdev->alias = "mt7530";
-+ swdev->name = "mt7530";
-+ } else if (IS_ENABLED(CONFIG_SOC_MT7621)) {
-+ swdev->alias = "mt7621";
-+ swdev->name = "mt7621";
-+ } else {
-+ swdev->alias = "mt7620";
-+ swdev->name = "mt7620";
-+ }
-+ swdev->cpu_port = MT7530_CPU_PORT;
-+ swdev->ports = MT7530_NUM_PORTS;
-+ swdev->vlans = MT7530_NUM_VLANS;
-+ if (IS_ENABLED(CONFIG_SOC_MT7621))
-+ swdev->ops = &mt7621_ops;
-+ else
-+ swdev->ops = &mt7530_ops;
-+
-+ ret = register_switch(swdev, NULL);
-+ if (ret) {
-+ dev_err(dev, "failed to register mt7530\n");
-+ return ret;
-+ }
-+
-+
-+ map = mt7530_find_mapping(dev->of_node);
-+ if (map)
-+ mt7530_apply_mapping(mt7530, map);
-+ mt7530_apply_config(swdev);
-+
-+ /* magic vodoo */
-+ if (!IS_ENABLED(CONFIG_SOC_MT7621) && bus && mt7530_r32(mt7530, REG_HWTRAP) != 0x1117edf) {
-+ dev_info(dev, "fixing up MHWTRAP register - bootloader probably played with it\n");
-+ mt7530_w32(mt7530, REG_HWTRAP, 0x1117edf);
-+ }
-+ dev_info(dev, "loaded %s driver\n", swdev->name);
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mt7530.h
-@@ -0,0 +1,20 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _MT7530_H__
-+#define _MT7530_H__
-+
-+int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan);
-+
-+#endif
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1308,8 +1308,13 @@ static int __init fe_init(struct net_dev
- }
-
- err = fe_hw_init(dev);
-- if (!err)
-- return 0;
-+ if (err)
-+ goto err_phy_disconnect;
-+
-+ if ((priv->flags & FE_FLAG_HAS_SWITCH) && priv->soc->switch_config)
-+ priv->soc->switch_config(priv);
-+
-+ return 0;
-
- err_phy_disconnect:
- if (priv->phy)
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -383,6 +383,7 @@ struct fe_soc_data {
- int (*fwd_config)(struct fe_priv *priv);
- void (*tx_dma)(struct fe_tx_dma *txd);
- int (*switch_init)(struct fe_priv *priv);
-+ int (*switch_config)(struct fe_priv *priv);
- void (*port_init)(struct fe_priv *priv, struct device_node *port);
- int (*has_carrier)(struct fe_priv *priv);
- int (*mdio_init)(struct fe_priv *priv);
---- a/drivers/net/ethernet/mediatek/soc_mt7620.c
-+++ b/drivers/net/ethernet/mediatek/soc_mt7620.c
-@@ -313,6 +313,7 @@ static struct fe_soc_data mt7620_data =
- .fwd_config = mt7620_fwd_config,
- .tx_dma = mt7620_tx_dma,
- .switch_init = mtk_gsw_init,
-+ .switch_config = mt7620_gsw_config,
- .port_init = mt7620_port_init,
- .reg_table = mt7620_reg_table,
- .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
diff --git a/target/linux/ramips/patches-4.3/0514-net-mediatek-fix_esw.patch b/target/linux/ramips/patches-4.3/0514-net-mediatek-fix_esw.patch
deleted file mode 100644
index de44a9f286..0000000000
--- a/target/linux/ramips/patches-4.3/0514-net-mediatek-fix_esw.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/drivers/net/ethernet/mediatek/esw_rt3050.c
-+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
-@@ -16,6 +16,7 @@
- #include <linux/kernel.h>
- #include <linux/platform_device.h>
- #include <asm/mach-ralink/ralink_regs.h>
-+#include <linux/of_irq.h>
-
- #include <linux/switch.h>
-
-@@ -1332,7 +1333,6 @@ static int esw_probe(struct platform_dev
- const __be32 *port_map, *reg_init;
- struct switch_dev *swdev;
- struct rt305x_esw *esw;
-- struct resource *irq;
- int ret;
-
- esw = devm_kzalloc(&pdev->dev, sizeof(*esw), GFP_KERNEL);
-@@ -1340,7 +1340,7 @@ static int esw_probe(struct platform_dev
- return -ENOMEM;
-
- esw->dev = &pdev->dev;
-- esw->irq = irq->start;
-+ esw->irq = irq_of_parse_and_map(np, 0);
- esw->base = devm_ioremap_resource(&pdev->dev, res);
- if (!esw->base)
- return -EADDRNOTAVAIL;
-@@ -1365,7 +1365,7 @@ static int esw_probe(struct platform_dev
- ret = register_switch(swdev, NULL);
- if (ret < 0) {
- dev_err(&pdev->dev, "register_switch failed\n");
-- goto unmap_base;
-+ return ret;
- }
-
- platform_set_drvdata(pdev, esw);
-@@ -1383,11 +1383,6 @@ static int esw_probe(struct platform_dev
- }
-
- return ret;
--
--unmap_base:
-- iounmap(esw->base);
-- kfree(esw);
-- return ret;
- }
-
- static int esw_remove(struct platform_device *pdev)
diff --git a/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch b/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch
deleted file mode 100644
index 369afa97de..0000000000
--- a/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 3c550ae0359be5bc4d5daa86a62f711a91ac8dde Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 13 Dec 2015 17:46:09 +0100
-Subject: [PATCH 2/2] net:mediatke: add phy_ethtool_ioctl() support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1344,6 +1344,9 @@ static int fe_do_ioctl(struct net_device
- return -ENODEV;
-
- switch (cmd) {
-+ case SIOCETHTOOL:
-+ return phy_ethtool_ioctl(priv->phy_dev,
-+ (void *) ifr->ifr_data);
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
diff --git a/target/linux/ramips/patches-4.3/0901-spansion_nand_id_fix.patch b/target/linux/ramips/patches-4.3/0901-spansion_nand_id_fix.patch
deleted file mode 100644
index bb95461276..0000000000
--- a/target/linux/ramips/patches-4.3/0901-spansion_nand_id_fix.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 8b61a1a33e41456ebeafa0ebe7ec0fccf859861e Mon Sep 17 00:00:00 2001
-From: Nikolay Martynov <mar.kolya@gmail.com>
-Date: Wed, 25 Nov 2015 20:43:46 -0500
-Subject: [PATCH] mtd: nand: Fix Spansion sparearea size detection
-
-According to datasheet S34ML02G2 and S34ML04G2 have
-larger sparea area size than was detected.
-
-Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
----
- drivers/mtd/nand/nand_base.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -3422,6 +3422,7 @@ static void nand_decode_ext_id(struct mt
- /*
- * Field definitions are in the following datasheets:
- * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
-+ * Spansion S34ML02G2 (p.33)
- * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
- * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22)
- *
-@@ -3519,6 +3520,19 @@ static void nand_decode_ext_id(struct mt
- *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-
- /*
-+ * Spansion S34ML0[24]G2 have oobsize twice as large
-+ * as S34ML01G2 encoded in the same bit. We
-+ * differinciate them by their ID length
-+ */
-+ if (id_data[0] == NAND_MFR_AMD
-+ && (id_data[1] == 0xda
-+ || id_data[1] == 0xdc
-+ || id_data[1] == 0xca
-+ || id_data[1] == 0xcc)) {
-+ mtd->oobsize *= 2;
-+ }
-+
-+ /*
- * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
- * 512B page. For Toshiba SLC, we decode the 5th/6th byte as
- * follows:
diff --git a/target/linux/ramips/rt288x/config-4.3 b/target/linux/ramips/rt288x/config-4.4
index 4e6e96a8c2..9c86e80da5 100644
--- a/target/linux/ramips/rt288x/config-4.3
+++ b/target/linux/ramips/rt288x/config-4.4
@@ -1,4 +1,5 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -11,6 +12,7 @@ CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
@@ -51,6 +53,7 @@ CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_RALINK=y
@@ -84,6 +87,7 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
@@ -104,11 +108,13 @@ CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
CONFIG_MIPS_L1_CACHE_SHIFT_4=y
@@ -142,7 +148,6 @@ CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
-CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PCI is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
@@ -158,12 +163,10 @@ CONFIG_RESET_CONTROLLER=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SG_SPLIT is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
# CONFIG_SOC_MT7621 is not set
CONFIG_SOC_RT288X=y
@@ -174,7 +177,6 @@ CONFIG_SPI_MASTER=y
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_RT2880=y
CONFIG_SRCU=y
-# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
diff --git a/target/linux/ramips/rt305x/config-4.3 b/target/linux/ramips/rt305x/config-4.4
index cd451c72a9..4c14e3724c 100644
--- a/target/linux/ramips/rt305x/config-4.3
+++ b/target/linux/ramips/rt305x/config-4.4
@@ -1,4 +1,5 @@
CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -11,6 +12,7 @@ CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
@@ -19,6 +21,7 @@ CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKEVT_RT3352=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
+CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
@@ -56,6 +59,7 @@ CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_RALINK=y
@@ -89,6 +93,7 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
@@ -107,11 +112,13 @@ CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
@@ -143,7 +150,6 @@ CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
@@ -159,12 +165,10 @@ CONFIG_RESET_CONTROLLER=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SG_SPLIT is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
@@ -175,7 +179,6 @@ CONFIG_SPI_MASTER=y
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_RT2880=y
CONFIG_SRCU=y
-# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
diff --git a/target/linux/ramips/rt3883/config-4.3 b/target/linux/ramips/rt3883/config-4.4
index f910d7a51e..b25face30c 100644
--- a/target/linux/ramips/rt3883/config-4.3
+++ b/target/linux/ramips/rt3883/config-4.4
@@ -1,5 +1,6 @@
CONFIG_AR8216_PHY=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -12,6 +13,7 @@ CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
@@ -55,6 +57,7 @@ CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_RALINK=y
@@ -88,6 +91,7 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
@@ -107,11 +111,13 @@ CONFIG_IRQ_INTC=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
@@ -148,7 +154,6 @@ CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
@@ -168,12 +173,10 @@ CONFIG_RTL8367_PHY=y
CONFIG_SCHED_HRTICK=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SG_SPLIT is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
@@ -184,7 +187,6 @@ CONFIG_SPI_MASTER=y
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_RT2880=y
CONFIG_SRCU=y
-# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y