diff options
17 files changed, 523 insertions, 214 deletions
diff --git a/target/linux/lantiq/ase/base-files/etc/board.d/01_leds b/target/linux/lantiq/ase/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..6a8de7d7a5 --- /dev/null +++ b/target/linux/lantiq/ase/base-files/etc/board.d/01_leds @@ -0,0 +1,32 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +led_dsl="$(get_dt_led dsl)" +[ -n "$led_dsl" ] && { + led_internet="$(get_dt_led internet)" + if [ -n "$led_internet" ]; then + ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0" + ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan" + else + ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0" + fi +} + +board=$(board_name) + +case "$board" in +allnet,all0333cj) + ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/lantiq/ase/base-files/etc/board.d/02_network b/target/linux/lantiq/ase/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..d37e999243 --- /dev/null +++ b/target/linux/lantiq/ase/base-files/etc/board.d/02_network @@ -0,0 +1,52 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh +. /lib/functions/lantiq.sh + +board_config_update + +annex="a" + +lan_mac="" +wan_mac="" + +board=$(board_name) + +case "$board" in +allnet,all0333cj) + annex="b" + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0' + ;; +netgear,dgn1000b) + annex="b" + ucidef_set_interface_lan 'eth0' + ;; +*) + ucidef_set_interface_lan 'eth0' + ;; +esac + +ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ + ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl" + +if lantiq_is_vdsl_system; then + ucidef_add_vdsl_modem "$annex" "av" +else + ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" +fi + +ucidef_set_interface_wan "dsl0" "pppoe" + +[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac" +[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac" + +board_config_flush + +exit 0 + diff --git a/target/linux/lantiq/ase/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/ase/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..d088601bb0 --- /dev/null +++ b/target/linux/lantiq/ase/base-files/lib/upgrade/platform.sh @@ -0,0 +1,10 @@ +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + default_do_upgrade "$1" +} diff --git a/target/linux/lantiq/falcon/base-files/etc/board.d/02_network b/target/linux/lantiq/falcon/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..76f134d6d4 --- /dev/null +++ b/target/linux/lantiq/falcon/base-files/etc/board.d/02_network @@ -0,0 +1,36 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh +. /lib/functions/lantiq.sh + +board_config_update + +annex="a" + +lan_mac="" +wan_mac="" + +ucidef_set_interface_lan 'eth0' + +ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ + ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl" + +if lantiq_is_vdsl_system; then + ucidef_add_vdsl_modem "$annex" "av" +else + ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" +fi + +ucidef_set_interface_wan "dsl0" "pppoe" + +[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac" +[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac" + +board_config_flush + +exit 0 + diff --git a/target/linux/lantiq/falcon/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/falcon/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..d088601bb0 --- /dev/null +++ b/target/linux/lantiq/falcon/base-files/lib/upgrade/platform.sh @@ -0,0 +1,10 @@ +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + default_do_upgrade "$1" +} diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds index e89de97fbe..b4d26d37ff 100755 --- a/target/linux/lantiq/base-files/etc/board.d/01_leds +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds @@ -1,7 +1,6 @@ #!/bin/sh # # Copyright (C) 2011-2015 OpenWrt.org -# based on ar71xx # . /lib/functions/leds.sh @@ -32,35 +31,9 @@ led_dsl="$(get_dt_led dsl)" board=$(board_name) case "$board" in -allnet,all0333cj) - ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1" - ;; -arcadyan,arv4525pw) - ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0" - ;; -arcadyan,arv7506pw11) - ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio" - ;; arcadyan,arv7519rw22) ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1" ;; -arcadyan,arv752dpw22) - ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio" - ;; -bt,homehub-v5a) - ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0" - ;; -netgear,dm200) - ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0" - ;; -avm,fritz3370-rev2-hynix|\ -avm,fritz3370-rev2-micron) - ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17" - ;; -zyxel,p-2812hnu-f1|\ -zyxel,p-2812hnu-f3) - ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio" - ;; arcadyan,vgv7510kw22-nor|\ arcadyan,vgv7510kw22-brn) ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio" @@ -69,6 +42,13 @@ arcadyan,vgv7519-nor|\ arcadyan,vgv7519-brn) ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio" ;; +avm,fritz3370-rev2-hynix|\ +avm,fritz3370-rev2-micron) + ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17" + ;; +bt,homehub-v5a) + ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0" + ;; buffalo,wbmr-300hpd) ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08" ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04" @@ -76,7 +56,12 @@ buffalo,wbmr-300hpd) ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20" ucidef_set_led_default "router" "router" "wbmr300:green:router" "1" ;; -*) +netgear,dm200) + ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0" + ;; +zyxel,p-2812hnu-f1|\ +zyxel,p-2812hnu-f3) + ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio" ;; esac diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network index d79a30d22d..f56de32614 100755 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network @@ -9,132 +9,44 @@ board_config_update -vpi=1 -vci=32 annex="a" -tone="av" -xfer_mode="" -encaps="llc" -payload="bridged" + lan_mac="" wan_mac="" -interface_wan="dsl0" board=$(board_name) case "$board" in -audiocodes,mp-252) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" - ;; - -allnet,all0333cj) - annex="b" - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0' - ;; - -arcadyan,arv4510pw) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0" - ;; - -arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw) - ucidef_add_switch "switch0" \ - "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" - ;; - -arcadyan,arv4520pw) - annex="b" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0" - ;; - -arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw) - annex="b" - ucidef_set_interface_lan 'eth0' - ;; - -arcadyan,arv7506pw11) - annex="b" - wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" - ;; - -arcadyan,arv7519pw) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0" - ;; - -arcadyan,arv7519rw22) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1) - ucidef_add_switch "switch0" \ - "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0" - ;; - -arcadyan,arv752dpw22|arcadyan,arv8539pw22) - annex="b" - ucidef_add_switch "switch0" \ - "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" - ;; - alphanetworks,asl56026) lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) wan_mac=$(mtd_get_mac_ascii uboot_env wanmac) ucidef_add_switch "switch0"\ "2:lan" "3:lan" "6t@eth0" ;; - -bt,homehub-v2b) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) +arcadyan,arv7519rw22) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1) ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0" - ;; - -bt,homehub-v3a) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0' + "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0" ;; - -bt,homehub-v5a) - lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c) +arcadyan,vg3503j) + lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) wan_mac=$(macaddr_add "$lan_mac" 1) ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" + "2:lan:2" "4:lan:1" "6t@eth0" ;; - -netgear,dgn1000b) +arcadyan,vgv7510kw22-brn|\ +arcadyan,vgv7510kw22-nor) annex="b" - ucidef_set_interface_lan 'eth0' - ;; - -netgear,dgn3500|netgear,dgn3500b) - lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2) ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0" - ;; - -netgear,dm200) - lan_mac=$(mtd_get_mac_binary ART 0x0) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0' + "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0" ;; - -lantiq,easy80920-nand|lantiq,easy80920-nor) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) +arcadyan,vgv7519-brn|\ +arcadyan,vgv7519-nor) + wan_mac=$(mtd_get_mac_binary board_config 0x16) ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" ;; - avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron) annex="b" @@ -143,21 +55,12 @@ avm,fritz3370-rev2-micron) ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" ;; - -avm,fritz7312|\ -avm,fritz7320) - annex="b" - wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1) - ucidef_set_interface_lan 'eth0' - ;; - avm,fritz7360sl) annex="b" wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1) ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" ;; - avm,fritz7362sl) annex="b" lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) @@ -165,7 +68,6 @@ avm,fritz7362sl) ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" ;; - avm,fritz7412) tffsdev=$(find_mtd_chardev "nand-tffs") annex="b" @@ -173,91 +75,64 @@ avm,fritz7412) wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl -o) ucidef_set_interface_lan 'eth0' ;; - -siemens,gigaset-sx76x) - annex="b" +bt,homehub-v5a) + lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c) + wan_mac=$(macaddr_add "$lan_mac" 1) ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" + "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" ;; - -zte,h201l) - annex="b" +buffalo,wbmr-300hpd) + lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr) + wan_mac="$lan_mac" ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0" + "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0" ;; - -zyxel,p-2601hn) +lantiq,easy80920-nand|\ +lantiq,easy80920-nor) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0" + "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" ;; - -zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3) - lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) +netgear,dm200) + lan_mac=$(mtd_get_mac_binary ART 0x0) wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0" + ucidef_set_interface_lan 'eth0' ;; - -tplink,tdw8970|tplink,tdw8980) +tplink,tdw8970|\ +tplink,tdw8980) wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1) ucidef_add_switch "switch0" \ "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0" ;; - -arcadyan,vg3503j) - lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "2:lan:2" "4:lan:1" "6t@eth0" - ;; - -tplink,vr200|tplink,vr200v) +tplink,vr200|\ +tplink,vr200v) wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1) ucidef_add_switch "switch0" \ "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0" ;; - -arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn) - annex="b" - wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2) - ucidef_add_switch "switch0" \ - "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0" - ;; - -arcadyan,vgv7519-nor|arcadyan,vgv7519-brn) - wan_mac=$(mtd_get_mac_binary board_config 0x16) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" - ;; - -buffalo,wbmr-hp-g300h) - ucidef_add_switch "switch0" \ - "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" - ;; - -buffalo,wbmr-300hpd) - lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr) - wan_mac="$lan_mac" +zyxel,p-2812hnu-f1|\ +zyxel,p-2812hnu-f3) + lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) ucidef_add_switch "switch0" \ - "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0" + "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0" ;; - *) ucidef_set_interface_lan 'eth0' ;; - esac ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ - ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl" + ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl" if lantiq_is_vdsl_system; then - ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode" + ucidef_add_vdsl_modem "$annex" "av" else ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" fi -ucidef_set_interface_wan "$interface_wan" "pppoe" +ucidef_set_interface_wan "dsl0" "pppoe" [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac" [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac" diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 0b48b77d41..4202187d4f 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -1,5 +1,4 @@ #!/bin/sh -# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom [ -e /lib/firmware/$FIRMWARE ] && exit 0 diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom new file mode 100644 index 0000000000..6fee72ea8d --- /dev/null +++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -0,0 +1,38 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh + +case "$FIRMWARE" in + "ath9k-eeprom-pci-0000:00:0e.0.bin" | \ + "ath9k-eeprom-pci-0000:01:00.0.bin" | \ + "ath9k-eeprom-pci-0000:02:00.0.bin") + board=$(board_name) + + case "$board" in + avm,fritz3370-rev2-hynix|\ + avm,fritz3370-rev2-micron|\ + avm,fritz7362sl) + caldata_extract_reverse "urlader" 0x1541 0x440 + ;; + avm,fritz7360sl) + caldata_extract "urlader" 0x985 0x1000 + ;; + avm,fritz7412) + /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") + ;; + bt,homehub-v5a) + caldata_extract_ubi "caldata" 0x1000 0x1000 + ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c + ;; + tplink,tdw8970|\ + tplink,tdw8980) + caldata_extract "boardconfig" 0x21000 0x1000 + ;; + *) + caldata_die "board $board is not supported yet" + ;; + esac + ;; +esac diff --git a/target/linux/lantiq/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh index c47ff78fb2..dcd797c30d 100755 --- a/target/linux/lantiq/base-files/lib/upgrade/platform.sh +++ b/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh @@ -13,8 +13,6 @@ platform_do_upgrade() { avm,fritz3370-rev2-micron|\ avm,fritz7362sl|\ avm,fritz7412|\ - bt,homehub-v2b|\ - bt,homehub-v3a|\ bt,homehub-v5a|\ zyxel,p-2812hnu-f1|\ zyxel,p-2812hnu-f3) diff --git a/target/linux/lantiq/xway/base-files/etc/board.d/01_leds b/target/linux/lantiq/xway/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..82a39f4648 --- /dev/null +++ b/target/linux/lantiq/xway/base-files/etc/board.d/01_leds @@ -0,0 +1,44 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +led_wifi="$(get_dt_led wifi)" +[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt" + +led_usb="$(get_dt_led usb)" +[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1" + +led_usb2="$(get_dt_led usb2)" +[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1" + +led_dsl="$(get_dt_led dsl)" +[ -n "$led_dsl" ] && { + led_internet="$(get_dt_led internet)" + if [ -n "$led_internet" ]; then + ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0" + ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan" + else + ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0" + fi +} + +board=$(board_name) + +case "$board" in +arcadyan,arv7506pw11) + ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio" + ;; +arcadyan,arv752dpw22) + ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/lantiq/xway/base-files/etc/board.d/02_network b/target/linux/lantiq/xway/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..b1b742bd1f --- /dev/null +++ b/target/linux/lantiq/xway/base-files/etc/board.d/02_network @@ -0,0 +1,122 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh +. /lib/functions/lantiq.sh + +board_config_update + +annex="a" + +lan_mac="" +wan_mac="" + +board=$(board_name) + +case "$board" in +arcadyan,arv4510pw) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0" + ;; +arcadyan,arv4519pw|\ +arcadyan,arv7510pw22|\ +arcadyan,arv7518pw) + ucidef_add_switch "switch0" \ + "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" + ;; +arcadyan,arv7506pw11) + annex="b" + wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" + ;; +arcadyan,arv7519pw) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0" + ;; +arcadyan,arv7525pw|\ +arcadyan,arv752dpw) + annex="b" + ucidef_set_interface_lan 'eth0' + ;; +arcadyan,arv752dpw22|\ +arcadyan,arv8539pw22) + annex="b" + ucidef_add_switch "switch0" \ + "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" + ;; +audiocodes,mp-252) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" + ;; +avm,fritz7312|\ +avm,fritz7320) + annex="b" + wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1) + ucidef_set_interface_lan 'eth0' + ;; +bt,homehub-v2b) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0" + ;; +bt,homehub-v3a) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0' + ;; +buffalo,wbmr-hp-g300h) + ucidef_add_switch "switch0" \ + "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" + ;; +netgear,dgn3500|\ +netgear,dgn3500b) + lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0" + ;; +siemens,gigaset-sx76x) + annex="b" + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" + ;; +zte,h201l) + annex="b" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0" + ;; +zyxel,p-2601hn) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0" + ;; +*) + ucidef_set_interface_lan 'eth0' + ;; +esac + +ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ + ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl" + +if lantiq_is_vdsl_system; then + ucidef_add_vdsl_modem "$annex" "av" +else + ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" +fi + +ucidef_set_interface_wan "dsl0" "pppoe" + +[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac" +[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac" + +board_config_flush + +exit 0 + diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 5a6e8d360b..1f12da8553 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -41,28 +41,13 @@ case "$FIRMWARE" in caldata_extract_swap "art-copy" 0x0 0x1000 ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c ;; - bt,homehub-v5a) - caldata_extract_ubi "caldata" 0x1000 0x1000 - ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c - ;; netgear,dgn3500|netgear,dgn3500b) caldata_extract "calibration" 0xf000 0x1000 ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c ;; - avm,fritz3370-rev2-hynix|\ - avm,fritz3370-rev2-micron|\ - avm,fritz7362sl) - caldata_extract_reverse "urlader" 0x1541 0x440 - ;; - avm,fritz7312|avm,fritz7320|avm,fritz7360sl) + avm,fritz7312|avm,fritz7320) caldata_extract "urlader" 0x985 0x1000 ;; - avm,fritz7412) - /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") - ;; - tplink,tdw8970|tplink,tdw8980) - caldata_extract "boardconfig" 0x21000 0x1000 - ;; *) caldata_die "board $board is not supported yet" ;; diff --git a/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..5ef0a0ddb9 --- /dev/null +++ b/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh @@ -0,0 +1,20 @@ +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + bt,homehub-v2b|\ + bt,homehub-v3a) + nand_do_upgrade $1 + ;; + *) + default_do_upgrade "$1" + ;; + esac +} diff --git a/target/linux/lantiq/xway_legacy/base-files/etc/board.d/01_leds b/target/linux/lantiq/xway_legacy/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..4200dcb0c8 --- /dev/null +++ b/target/linux/lantiq/xway_legacy/base-files/etc/board.d/01_leds @@ -0,0 +1,41 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +led_wifi="$(get_dt_led wifi)" +[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt" + +led_usb="$(get_dt_led usb)" +[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1" + +led_usb2="$(get_dt_led usb2)" +[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1" + +led_dsl="$(get_dt_led dsl)" +[ -n "$led_dsl" ] && { + led_internet="$(get_dt_led internet)" + if [ -n "$led_internet" ]; then + ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0" + ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan" + else + ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0" + fi +} + +board=$(board_name) + +case "$board" in +arcadyan,arv4525pw) + ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/lantiq/xway_legacy/base-files/etc/board.d/02_network b/target/linux/lantiq/xway_legacy/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..120857de4c --- /dev/null +++ b/target/linux/lantiq/xway_legacy/base-files/etc/board.d/02_network @@ -0,0 +1,52 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh +. /lib/functions/lantiq.sh + +board_config_update + +annex="a" + +lan_mac="" +wan_mac="" + +board=$(board_name) + +case "$board" in +arcadyan,arv4520pw) + annex="b" + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0" + ;; +arcadyan,arv4525pw|\ +arcadyan,arv452cqw) + annex="b" + ucidef_set_interface_lan 'eth0' + ;; +*) + ucidef_set_interface_lan 'eth0' + ;; +esac + +ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ + ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl" + +if lantiq_is_vdsl_system; then + ucidef_add_vdsl_modem "$annex" "av" +else + ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" +fi + +ucidef_set_interface_wan "dsl0" "pppoe" + +[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac" +[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac" + +board_config_flush + +exit 0 + diff --git a/target/linux/lantiq/xway_legacy/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xway_legacy/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..d088601bb0 --- /dev/null +++ b/target/linux/lantiq/xway_legacy/base-files/lib/upgrade/platform.sh @@ -0,0 +1,10 @@ +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + default_do_upgrade "$1" +} |