diff options
| -rw-r--r-- | target/linux/kirkwood/Makefile | 2 | ||||
| -rw-r--r-- | target/linux/kirkwood/config-default | 4 | ||||
| -rw-r--r-- | target/linux/kirkwood/patches/002-mvsdio_delay.patch | 4 | ||||
| -rw-r--r-- | target/linux/kirkwood/patches/100-dockstar.patch | 162 | ||||
| -rw-r--r-- | target/linux/kirkwood/patches/200-iconnect.patch | 26 |
5 files changed, 19 insertions, 179 deletions
diff --git a/target/linux/kirkwood/Makefile b/target/linux/kirkwood/Makefile index d75f233098..fc0329b781 100644 --- a/target/linux/kirkwood/Makefile +++ b/target/linux/kirkwood/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Marvell Kirkwood FEATURES:=targz usb jffs2 MAINTAINER:=Imre Kaloz <kaloz@openwrt.org> -LINUX_VERSION:=2.6.35.11 +LINUX_VERSION:=2.6.37.3 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/kirkwood/config-default b/target/linux/kirkwood/config-default index 77e646bd46..d37d8abf88 100644 --- a/target/linux/kirkwood/config-default +++ b/target/linux/kirkwood/config-default @@ -77,6 +77,7 @@ CONFIG_JBD=y CONFIG_LEDS_GPIO=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_MACH_D2NET_V2 is not set # CONFIG_MACH_DB88F6281_BP is not set CONFIG_MACH_DOCKSTAR=y # CONFIG_MACH_ESATA_SHEEVAPLUG is not set @@ -86,12 +87,15 @@ CONFIG_MACH_ICONNECT=y # CONFIG_MACH_MV88F6281GTW_GE is not set # CONFIG_MACH_NET2BIG_V2 is not set # CONFIG_MACH_NET5BIG_V2 is not set +# CONFIG_MACH_NETSPACE_MAX_V2 is not set # CONFIG_MACH_NETSPACE_V2 is not set CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y +# CONFIG_MACH_OPENRD_ULTIMATE is not set # CONFIG_MACH_RD88F6192_NAS is not set # CONFIG_MACH_RD88F6281 is not set CONFIG_MACH_SHEEVAPLUG=y +# CONFIG_MACH_T5325 is not set # CONFIG_MACH_TS219 is not set # CONFIG_MACH_TS41X is not set CONFIG_MMC=y diff --git a/target/linux/kirkwood/patches/002-mvsdio_delay.patch b/target/linux/kirkwood/patches/002-mvsdio_delay.patch index 4198690524..ba28853604 100644 --- a/target/linux/kirkwood/patches/002-mvsdio_delay.patch +++ b/target/linux/kirkwood/patches/002-mvsdio_delay.patch @@ -1,6 +1,6 @@ --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c -@@ -264,6 +264,15 @@ static int mmc_switch_hs(struct mmc_card +@@ -332,6 +332,15 @@ int mmc_sd_switch_hs(struct mmc_card *ca return -ENOMEM; } @@ -18,7 +18,7 @@ goto out; --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c -@@ -302,9 +302,9 @@ void mmc_set_data_timeout(struct mmc_dat +@@ -303,9 +303,9 @@ void mmc_set_data_timeout(struct mmc_dat * The limit is really 250 ms, but that is * insufficient for some crappy cards. */ diff --git a/target/linux/kirkwood/patches/100-dockstar.patch b/target/linux/kirkwood/patches/100-dockstar.patch deleted file mode 100644 index 59334b4cda..0000000000 --- a/target/linux/kirkwood/patches/100-dockstar.patch +++ /dev/null @@ -1,162 +0,0 @@ -This patch adds support for the Seagate FreeAgent DockStar, a Marvell -Sheevaplug derivative. I have already registered the DOCKSTAR machine -ID. - -Signed-off-by: Eric Cooper <ecc@xxxxxxx> ---- - arch/arm/mach-kirkwood/Kconfig | 6 ++ - arch/arm/mach-kirkwood/Makefile | 1 + - arch/arm/mach-kirkwood/dockstar-setup.c | 112 +++++++++++++++++++++++++++++++ - arch/arm/tools/mach-types | 1 + - 4 files changed, 120 insertions(+), 0 deletions(-) - create mode 100644 arch/arm/mach-kirkwood/dockstar-setup.c - ---- a/arch/arm/mach-kirkwood/Kconfig -+++ b/arch/arm/mach-kirkwood/Kconfig -@@ -99,6 +99,12 @@ config MACH_NET5BIG_V2 - Say 'Y' here if you want your kernel to support the - LaCie 5Big Network v2 NAS. - -+config MACH_DOCKSTAR -+ bool "Seagate FreeAgent DockStar" -+ help -+ Say 'Y' here if you want your kernel to support the -+ Seagate FreeAgent DockStar. -+ - endmenu - - endif ---- a/arch/arm/mach-kirkwood/Makefile -+++ b/arch/arm/mach-kirkwood/Makefile -@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88 - obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o - obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o - obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o -+obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o - obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o - obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o - obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o ---- /dev/null -+++ b/arch/arm/mach-kirkwood/dockstar-setup.c -@@ -0,0 +1,121 @@ -+/* -+ * arch/arm/mach-kirkwood/dockstar-setup.c -+ * -+ * Seagate FreeAgent DockStar Setup -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/ata_platform.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mv643xx_eth.h> -+#include <linux/gpio.h> -+#include <linux/leds.h> -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <mach/kirkwood.h> -+#include <plat/mvsdio.h> -+#include "common.h" -+#include "mpp.h" -+ -+static struct mtd_partition dockstar_nand_parts[] = { -+ { -+ .name = "u-boot", -+ .offset = 0, -+ .size = SZ_1M -+ }, { -+ .name = "second_stage_u-boot", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = SZ_1M -+ }, { -+ .name = "uImage", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = SZ_1M + SZ_2M, -+ }, { -+ .name = "rootfs", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = SZ_32M, -+ }, { -+ .name = "data", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL -+ }, -+}; -+ -+static struct mv643xx_eth_platform_data dockstar_ge00_data = { -+ .phy_addr = MV643XX_ETH_PHY_ADDR(0), -+}; -+ -+static struct gpio_led dockstar_led_pins[] = { -+ { -+ .name = "dockstar:green:health", -+ .default_trigger = "default-on", -+ .gpio = 46, -+ .active_low = 1, -+ }, -+ { -+ .name = "dockstar:orange:misc", -+ .default_trigger = "none", -+ .gpio = 47, -+ .active_low = 1, -+ }, -+}; -+ -+static struct gpio_led_platform_data dockstar_led_data = { -+ .leds = dockstar_led_pins, -+ .num_leds = ARRAY_SIZE(dockstar_led_pins), -+}; -+ -+static struct platform_device dockstar_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = &dockstar_led_data, -+ } -+}; -+ -+static unsigned int dockstar_mpp_config[] __initdata = { -+ MPP29_GPIO, /* USB Power Enable */ -+ MPP46_GPIO, /* LED green */ -+ MPP47_GPIO, /* LED orange */ -+ 0 -+}; -+ -+static void __init dockstar_init(void) -+{ -+ /* -+ * Basic setup. Needs to be called early. -+ */ -+ kirkwood_init(); -+ -+ /* setup gpio pin select */ -+ kirkwood_mpp_conf(dockstar_mpp_config); -+ -+ kirkwood_uart0_init(); -+ -+ if (gpio_request(29, "USB Power Enable") != 0 || -+ gpio_direction_output(29, 1) != 0) -+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); -+ kirkwood_ehci_init(); -+ -+ kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25); -+ -+ kirkwood_ge00_init(&dockstar_ge00_data); -+ -+ platform_device_register(&dockstar_leds); -+} -+ -+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") -+ .phys_io = KIRKWOOD_REGS_PHYS_BASE, -+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, -+ .boot_params = 0x00000100, -+ .init_machine = dockstar_init, -+ .map_io = kirkwood_map_io, -+ .init_irq = kirkwood_init_irq, -+ .timer = &kirkwood_timer, -+MACHINE_END diff --git a/target/linux/kirkwood/patches/200-iconnect.patch b/target/linux/kirkwood/patches/200-iconnect.patch index 3bc814067e..f8baae64a2 100644 --- a/target/linux/kirkwood/patches/200-iconnect.patch +++ b/target/linux/kirkwood/patches/200-iconnect.patch @@ -1,18 +1,18 @@ --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheeva - obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o + obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o +obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig -@@ -105,6 +105,12 @@ config MACH_DOCKSTAR +@@ -130,6 +130,12 @@ config MACH_T5325 Say 'Y' here if you want your kernel to support the - Seagate FreeAgent DockStar. + HP t5325 Thin Client. +config MACH_ICONNECT + bool "Iomega iConnect Wireless" @@ -25,17 +25,17 @@ endif --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h -@@ -103,6 +103,7 @@ - #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1 ) - - #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1 ) -+#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 1, 1, 1, 1 ) - #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1 ) +@@ -108,6 +108,7 @@ + #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) - #define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1 ) + #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) ++#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 1, 1, 1, 1, 1 ) + #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) + #define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) + #define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) --- /dev/null +++ b/arch/arm/mach-kirkwood/iconnect-setup.c -@@ -0,0 +1,190 @@ +@@ -0,0 +1,188 @@ +/* + * arch/arm/mach-kirkwood/iconnect-setup.c + * @@ -210,7 +210,7 @@ +static int __init iconnect_pci_init(void) +{ + if (machine_is_iconnect()) -+ kirkwood_pcie_init(); ++ kirkwood_pcie_init(KW_PCIE0); + + return 0; +} @@ -218,8 +218,6 @@ + + +MACHINE_START(ICONNECT, "Iomega iConnect Wireless") -+ .phys_io = KIRKWOOD_REGS_PHYS_BASE, -+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = iconnect_init, + .map_io = kirkwood_map_io, |