aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/generic/files/drivers/net/phy/ar8327.c42
-rw-r--r--target/linux/generic/files/drivers/net/phy/ar8327.h21
2 files changed, 62 insertions, 1 deletions
diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.c b/target/linux/generic/files/drivers/net/phy/ar8327.c
index 8e67f4b17d..24a13c6418 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8327.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.c
@@ -506,6 +506,14 @@ ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t);
t = ar8327_get_pad_cfg(pdata->pad5_cfg);
+ if (chip_is_ar8337(priv)) {
+ /*
+ * Workaround: RGMII RX delay setting needs to be
+ * always specified for AR8337 to avoid port 5
+ * RX hang on high traffic / flood conditions
+ */
+ t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
+ }
ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t);
t = ar8327_get_pad_cfg(pdata->pad6_cfg);
ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t);
@@ -670,6 +678,39 @@ ar8327_init_globals(struct ar8xxx_priv *priv)
/* Disable EEE on all phy's due to stability issues */
for (i = 0; i < AR8XXX_NUM_PHYS; i++)
data->eee[i] = false;
+
+ if (chip_is_ar8337(priv)) {
+ /* Update HOL registers with values suggested by QCA switch team */
+ for (i = 0; i < AR8327_NUM_PORTS; i++) {
+ if (i == AR8216_PORT_CPU || i == 5 || i == 6) {
+ t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S;
+ t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S;
+ t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S;
+ t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S;
+ t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF_S;
+ t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF_S;
+ t |= 0x1e << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S;
+ } else {
+ t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S;
+ t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S;
+ t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S;
+ t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S;
+ t |= 0x19 << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S;
+ }
+ ar8xxx_write(priv, AR8327_REG_PORT_HOL_CTRL0(i), t);
+
+ t = 0x6 << AR8327_PORT_HOL_CTRL1_ING_BUF_S;
+ t |= AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN;
+ t |= AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN;
+ t |= AR8327_PORT_HOL_CTRL1_WRED_EN;
+ ar8xxx_rmw(priv, AR8327_REG_PORT_HOL_CTRL1(i),
+ AR8327_PORT_HOL_CTRL1_ING_BUF |
+ AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ AR8327_PORT_HOL_CTRL1_WRED_EN,
+ t);
+ }
+ }
}
static void
@@ -1397,7 +1438,6 @@ const struct ar8xxx_chip ar8327_chip = {
.atu_flush_port = ar8327_atu_flush_port,
.vtu_flush = ar8327_vtu_flush,
.vtu_load_vlan = ar8327_vtu_load_vlan,
- .phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
.get_arl_entry = ar8327_get_arl_entry,
.sw_hw_apply = ar8327_sw_hw_apply,
diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.h b/target/linux/generic/files/drivers/net/phy/ar8327.h
index 7bce18bfb8..828dd28f38 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8327.h
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.h
@@ -272,7 +272,28 @@
#define AR8327_REG_PORT_PRIO(_i) (0x664 + (_i) * 0xc)
+#define AR8327_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8)
+#define AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF BITS(0, 4)
+#define AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S 0
+#define AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF BITS(4, 4)
+#define AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S 4
+#define AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF BITS(8, 4)
+#define AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S 8
+#define AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF BITS(12, 4)
+#define AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S 12
+#define AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF BITS(16, 4)
+#define AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF_S 16
+#define AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF BITS(20, 4)
+#define AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF_S 20
+#define AR8327_PORT_HOL_CTRL0_EG_PORT_BUF BITS(24, 6)
+#define AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S 24
+
#define AR8327_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
+#define AR8327_PORT_HOL_CTRL1_ING_BUF BITS(0, 4)
+#define AR8327_PORT_HOL_CTRL1_ING_BUF_S 0
+#define AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN BIT(6)
+#define AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7)
+#define AR8327_PORT_HOL_CTRL1_WRED_EN BIT(8)
#define AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
#define AR8337_PAD_MAC06_EXCHANGE_EN BIT(31)