aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/bcm53xx/patches-4.4/182-spi-bcm53xx-simplify-reading-SPI-data.patch107
-rw-r--r--target/linux/bcm53xx/patches-4.4/406-mtd-m25p80-use-single-SPI-message-for-writing-data.patch59
-rw-r--r--target/linux/bcm53xx/patches-4.9/182-spi-bcm53xx-simplify-reading-SPI-data.patch107
-rw-r--r--target/linux/bcm53xx/patches-4.9/401-mtd-m25p80-use-single-SPI-message-for-writing-data.patch68
4 files changed, 214 insertions, 127 deletions
diff --git a/target/linux/bcm53xx/patches-4.4/182-spi-bcm53xx-simplify-reading-SPI-data.patch b/target/linux/bcm53xx/patches-4.4/182-spi-bcm53xx-simplify-reading-SPI-data.patch
new file mode 100644
index 0000000000..ee377c491f
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/182-spi-bcm53xx-simplify-reading-SPI-data.patch
@@ -0,0 +1,107 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 29 Dec 2017 14:44:09 +0100
+Subject: [PATCH] spi: bcm53xx: simplify reading SPI data
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This commit makes transfer function use spi_transfer_is_last to
+determine if currently processed transfer is the last one. Thanks to
+that we finally set hardware registers properly and it makes controller
+behave the way it's expected to.
+
+This allows simplifying read function which can now simply start reading
+from the slot 0 instead of the last saved offset. It has been
+successfully tested using spi_write_then_read.
+
+Moreover this change fixes handling messages with two writing transfers.
+It's important for SPI flash devices as their drivers commonly use one
+transfer for a command and another one for data.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ drivers/spi/spi-bcm53xx.c | 26 ++++++++++----------------
+ 1 file changed, 10 insertions(+), 16 deletions(-)
+
+--- a/drivers/spi/spi-bcm53xx.c
++++ b/drivers/spi/spi-bcm53xx.c
+@@ -27,8 +27,6 @@ struct bcm53xxspi {
+ struct bcma_device *core;
+ struct spi_master *master;
+ void __iomem *mmio_base;
+-
+- size_t read_offset;
+ bool bspi; /* Boot SPI mode with memory mapping */
+ };
+
+@@ -172,8 +170,6 @@ static void bcm53xxspi_buf_write(struct
+
+ if (!cont)
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
+-
+- b53spi->read_offset = len;
+ }
+
+ static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
+@@ -182,10 +178,10 @@ static void bcm53xxspi_buf_read(struct b
+ u32 tmp;
+ int i;
+
+- for (i = 0; i < b53spi->read_offset + len; i++) {
++ for (i = 0; i < len; i++) {
+ tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
+ B53SPI_CDRAM_PCS_DSCK;
+- if (!cont && i == b53spi->read_offset + len - 1)
++ if (!cont && i == len - 1)
+ tmp &= ~B53SPI_CDRAM_CONT;
+ tmp &= ~0x1;
+ /* Command Register File */
+@@ -194,8 +190,7 @@ static void bcm53xxspi_buf_read(struct b
+
+ /* Set queue pointers */
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
+- bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
+- b53spi->read_offset + len - 1);
++ bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
+
+ if (cont)
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
+@@ -214,13 +209,11 @@ static void bcm53xxspi_buf_read(struct b
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
+
+ for (i = 0; i < len; ++i) {
+- int offset = b53spi->read_offset + i;
++ u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
+
+ /* Data stored in the transmit register file LSB */
+- r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
++ r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
+ }
+-
+- b53spi->read_offset = 0;
+ }
+
+ static int bcm53xxspi_transfer_one(struct spi_master *master,
+@@ -238,7 +231,8 @@ static int bcm53xxspi_transfer_one(struc
+ left = t->len;
+ while (left) {
+ size_t to_write = min_t(size_t, 16, left);
+- bool cont = left - to_write > 0;
++ bool cont = !spi_transfer_is_last(master, t) ||
++ left - to_write > 0;
+
+ bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
+ left -= to_write;
+@@ -250,9 +244,9 @@ static int bcm53xxspi_transfer_one(struc
+ buf = (u8 *)t->rx_buf;
+ left = t->len;
+ while (left) {
+- size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
+- left);
+- bool cont = left - to_read > 0;
++ size_t to_read = min_t(size_t, 16, left);
++ bool cont = !spi_transfer_is_last(master, t) ||
++ left - to_read > 0;
+
+ bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
+ left -= to_read;
diff --git a/target/linux/bcm53xx/patches-4.4/406-mtd-m25p80-use-single-SPI-message-for-writing-data.patch b/target/linux/bcm53xx/patches-4.4/406-mtd-m25p80-use-single-SPI-message-for-writing-data.patch
deleted file mode 100644
index d5525f6223..0000000000
--- a/target/linux/bcm53xx/patches-4.4/406-mtd-m25p80-use-single-SPI-message-for-writing-data.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: m25p80: use single SPI message for writing data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On all 3 tested Northstar devices with following flash memories:
-mx25l6405d (8192 Kbytes)
-mx25l12805d (16384 Kbytes)
-mx25l25635e (32768 Kbytes)
-I noticed writing to be broken. Not a single bit was changed leaving all
-bytes set to 0xff.
-
-This is most likely some problem related to the SPI controller or its
-driver. Using a single SPI message seems to workaround this. Of course
-it's not perfect solution as copying whole data into a new buffer makes
-writing slower.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -78,6 +78,7 @@ static void m25p80_write(struct spi_nor
- {
- struct m25p *flash = nor->priv;
- struct spi_device *spi = flash->spi;
-+ u8 *command = kzalloc(MAX_CMD_SIZE + len, GFP_KERNEL);
- struct spi_transfer t[2] = {};
- struct spi_message m;
- int cmd_sz = m25p_cmdsz(nor);
-@@ -87,20 +88,19 @@ static void m25p80_write(struct spi_nor
- if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
- cmd_sz = 1;
-
-- flash->command[0] = nor->program_opcode;
-- m25p_addr2cmd(nor, to, flash->command);
-+ command[0] = nor->program_opcode;
-+ m25p_addr2cmd(nor, to, command);
-+ memcpy(&command[cmd_sz], buf, len);
-
-- t[0].tx_buf = flash->command;
-- t[0].len = cmd_sz;
-+ t[0].tx_buf = command;
-+ t[0].len = cmd_sz + len;
- spi_message_add_tail(&t[0], &m);
-
-- t[1].tx_buf = buf;
-- t[1].len = len;
-- spi_message_add_tail(&t[1], &m);
--
- spi_sync(spi, &m);
-
- *retlen += m.actual_length - cmd_sz;
-+
-+ kfree(command);
- }
-
- static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
diff --git a/target/linux/bcm53xx/patches-4.9/182-spi-bcm53xx-simplify-reading-SPI-data.patch b/target/linux/bcm53xx/patches-4.9/182-spi-bcm53xx-simplify-reading-SPI-data.patch
new file mode 100644
index 0000000000..ee377c491f
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.9/182-spi-bcm53xx-simplify-reading-SPI-data.patch
@@ -0,0 +1,107 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 29 Dec 2017 14:44:09 +0100
+Subject: [PATCH] spi: bcm53xx: simplify reading SPI data
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This commit makes transfer function use spi_transfer_is_last to
+determine if currently processed transfer is the last one. Thanks to
+that we finally set hardware registers properly and it makes controller
+behave the way it's expected to.
+
+This allows simplifying read function which can now simply start reading
+from the slot 0 instead of the last saved offset. It has been
+successfully tested using spi_write_then_read.
+
+Moreover this change fixes handling messages with two writing transfers.
+It's important for SPI flash devices as their drivers commonly use one
+transfer for a command and another one for data.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ drivers/spi/spi-bcm53xx.c | 26 ++++++++++----------------
+ 1 file changed, 10 insertions(+), 16 deletions(-)
+
+--- a/drivers/spi/spi-bcm53xx.c
++++ b/drivers/spi/spi-bcm53xx.c
+@@ -27,8 +27,6 @@ struct bcm53xxspi {
+ struct bcma_device *core;
+ struct spi_master *master;
+ void __iomem *mmio_base;
+-
+- size_t read_offset;
+ bool bspi; /* Boot SPI mode with memory mapping */
+ };
+
+@@ -172,8 +170,6 @@ static void bcm53xxspi_buf_write(struct
+
+ if (!cont)
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
+-
+- b53spi->read_offset = len;
+ }
+
+ static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
+@@ -182,10 +178,10 @@ static void bcm53xxspi_buf_read(struct b
+ u32 tmp;
+ int i;
+
+- for (i = 0; i < b53spi->read_offset + len; i++) {
++ for (i = 0; i < len; i++) {
+ tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
+ B53SPI_CDRAM_PCS_DSCK;
+- if (!cont && i == b53spi->read_offset + len - 1)
++ if (!cont && i == len - 1)
+ tmp &= ~B53SPI_CDRAM_CONT;
+ tmp &= ~0x1;
+ /* Command Register File */
+@@ -194,8 +190,7 @@ static void bcm53xxspi_buf_read(struct b
+
+ /* Set queue pointers */
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
+- bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
+- b53spi->read_offset + len - 1);
++ bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
+
+ if (cont)
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
+@@ -214,13 +209,11 @@ static void bcm53xxspi_buf_read(struct b
+ bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
+
+ for (i = 0; i < len; ++i) {
+- int offset = b53spi->read_offset + i;
++ u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
+
+ /* Data stored in the transmit register file LSB */
+- r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
++ r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
+ }
+-
+- b53spi->read_offset = 0;
+ }
+
+ static int bcm53xxspi_transfer_one(struct spi_master *master,
+@@ -238,7 +231,8 @@ static int bcm53xxspi_transfer_one(struc
+ left = t->len;
+ while (left) {
+ size_t to_write = min_t(size_t, 16, left);
+- bool cont = left - to_write > 0;
++ bool cont = !spi_transfer_is_last(master, t) ||
++ left - to_write > 0;
+
+ bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
+ left -= to_write;
+@@ -250,9 +244,9 @@ static int bcm53xxspi_transfer_one(struc
+ buf = (u8 *)t->rx_buf;
+ left = t->len;
+ while (left) {
+- size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
+- left);
+- bool cont = left - to_read > 0;
++ size_t to_read = min_t(size_t, 16, left);
++ bool cont = !spi_transfer_is_last(master, t) ||
++ left - to_read > 0;
+
+ bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
+ left -= to_read;
diff --git a/target/linux/bcm53xx/patches-4.9/401-mtd-m25p80-use-single-SPI-message-for-writing-data.patch b/target/linux/bcm53xx/patches-4.9/401-mtd-m25p80-use-single-SPI-message-for-writing-data.patch
deleted file mode 100644
index 80c0e7877e..0000000000
--- a/target/linux/bcm53xx/patches-4.9/401-mtd-m25p80-use-single-SPI-message-for-writing-data.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: m25p80: use single SPI message for writing data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On all 3 tested Northstar devices with following flash memories:
-mx25l6405d (8192 Kbytes)
-mx25l12805d (16384 Kbytes)
-mx25l25635e (32768 Kbytes)
-I noticed writing to be broken. Not a single bit was changed leaving all
-bytes set to 0xff.
-
-This is most likely some problem related to the SPI controller or its
-driver. Using a single SPI message seems to workaround this. Of course
-it's not perfect solution as copying whole data into a new buffer makes
-writing slower.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -78,6 +78,7 @@ static ssize_t m25p80_write(struct spi_n
- {
- struct m25p *flash = nor->priv;
- struct spi_device *spi = flash->spi;
-+ u8 *command = kzalloc(MAX_CMD_SIZE + len, GFP_KERNEL);
- struct spi_transfer t[2] = {};
- struct spi_message m;
- int cmd_sz = m25p_cmdsz(nor);
-@@ -88,24 +89,26 @@ static ssize_t m25p80_write(struct spi_n
- if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
- cmd_sz = 1;
-
-- flash->command[0] = nor->program_opcode;
-- m25p_addr2cmd(nor, to, flash->command);
-+ command[0] = nor->program_opcode;
-+ m25p_addr2cmd(nor, to, command);
-+ memcpy(&command[cmd_sz], buf, len);
-
-- t[0].tx_buf = flash->command;
-- t[0].len = cmd_sz;
-+ t[0].tx_buf = command;
-+ t[0].len = cmd_sz + len;
- spi_message_add_tail(&t[0], &m);
-
-- t[1].tx_buf = buf;
-- t[1].len = len;
-- spi_message_add_tail(&t[1], &m);
--
- ret = spi_sync(spi, &m);
-- if (ret)
-+ if (ret) {
-+ kfree(command);
- return ret;
-+ }
-
- ret = m.actual_length - cmd_sz;
-- if (ret < 0)
-+ if (ret < 0) {
-+ kfree(command);
- return -EIO;
-+ }
-+ kfree(command);
- return ret;
- }
-