diff options
| -rw-r--r-- | target/linux/generic/files/drivers/net/phy/ar8327.c | 42 | ||||
| -rw-r--r-- | target/linux/generic/files/drivers/net/phy/ar8327.h | 21 |
2 files changed, 1 insertions, 62 deletions
diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.c b/target/linux/generic/files/drivers/net/phy/ar8327.c index 7bfc187509..74f0a08d76 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8327.c +++ b/target/linux/generic/files/drivers/net/phy/ar8327.c @@ -506,14 +506,6 @@ ar8327_hw_config_pdata(struct ar8xxx_priv *priv, ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t); t = ar8327_get_pad_cfg(pdata->pad5_cfg); - if (chip_is_ar8337(priv)) { - /* - * Workaround: RGMII RX delay setting needs to be - * always specified for AR8337 to avoid port 5 - * RX hang on high traffic / flood conditions - */ - t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN; - } ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t); t = ar8327_get_pad_cfg(pdata->pad6_cfg); ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t); @@ -678,39 +670,6 @@ ar8327_init_globals(struct ar8xxx_priv *priv) /* Disable EEE on all phy's due to stability issues */ for (i = 0; i < AR8XXX_NUM_PHYS; i++) data->eee[i] = false; - - if (chip_is_ar8337(priv)) { - /* Update HOL registers with values suggested by QCA switch team */ - for (i = 0; i < AR8327_NUM_PORTS; i++) { - if (i == AR8216_PORT_CPU || i == 5 || i == 6) { - t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S; - t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S; - t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S; - t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S; - t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF_S; - t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF_S; - t |= 0x1e << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S; - } else { - t = 0x3 << AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S; - t |= 0x4 << AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S; - t |= 0x6 << AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S; - t |= 0x8 << AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S; - t |= 0x19 << AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S; - } - ar8xxx_write(priv, AR8327_REG_PORT_HOL_CTRL0(i), t); - - t = 0x6 << AR8327_PORT_HOL_CTRL1_ING_BUF_S; - t |= AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN; - t |= AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN; - t |= AR8327_PORT_HOL_CTRL1_WRED_EN; - ar8xxx_rmw(priv, AR8327_REG_PORT_HOL_CTRL1(i), - AR8327_PORT_HOL_CTRL1_ING_BUF | - AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN | - AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN | - AR8327_PORT_HOL_CTRL1_WRED_EN, - t); - } - } } static void @@ -1498,6 +1457,7 @@ const struct ar8xxx_chip ar8327_chip = { .atu_flush_port = ar8327_atu_flush_port, .vtu_flush = ar8327_vtu_flush, .vtu_load_vlan = ar8327_vtu_load_vlan, + .phy_fixup = ar8327_phy_fixup, .set_mirror_regs = ar8327_set_mirror_regs, .get_arl_entry = ar8327_get_arl_entry, .sw_hw_apply = ar8327_sw_hw_apply, diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.h b/target/linux/generic/files/drivers/net/phy/ar8327.h index 2309e52899..d53ef885b1 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8327.h +++ b/target/linux/generic/files/drivers/net/phy/ar8327.h @@ -278,28 +278,7 @@ #define AR8327_REG_PORT_PRIO(_i) (0x664 + (_i) * 0xc) -#define AR8327_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8) -#define AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF BITS(0, 4) -#define AR8327_PORT_HOL_CTRL0_EG_PRI0_BUF_S 0 -#define AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF BITS(4, 4) -#define AR8327_PORT_HOL_CTRL0_EG_PRI1_BUF_S 4 -#define AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF BITS(8, 4) -#define AR8327_PORT_HOL_CTRL0_EG_PRI2_BUF_S 8 -#define AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF BITS(12, 4) -#define AR8327_PORT_HOL_CTRL0_EG_PRI3_BUF_S 12 -#define AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF BITS(16, 4) -#define AR8327_PORT_HOL_CTRL0_EG_PRI4_BUF_S 16 -#define AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF BITS(20, 4) -#define AR8327_PORT_HOL_CTRL0_EG_PRI5_BUF_S 20 -#define AR8327_PORT_HOL_CTRL0_EG_PORT_BUF BITS(24, 6) -#define AR8327_PORT_HOL_CTRL0_EG_PORT_BUF_S 24 - #define AR8327_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8) -#define AR8327_PORT_HOL_CTRL1_ING_BUF BITS(0, 4) -#define AR8327_PORT_HOL_CTRL1_ING_BUF_S 0 -#define AR8327_PORT_HOL_CTRL1_EG_PRI_BUF_EN BIT(6) -#define AR8327_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7) -#define AR8327_PORT_HOL_CTRL1_WRED_EN BIT(8) #define AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16) #define AR8337_PAD_MAC06_EXCHANGE_EN BIT(31) |