aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/oxnas/config-4.43
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts30
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts70
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts38
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts38
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts37
-rw-r--r--target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi9
-rw-r--r--target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c243
-rw-r--r--target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch5300
-rw-r--r--target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch91
-rw-r--r--target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch202
-rw-r--r--target/linux/oxnas/patches-4.4/400-oxnas-nand.patch3
12 files changed, 5908 insertions, 156 deletions
diff --git a/target/linux/oxnas/config-4.4 b/target/linux/oxnas/config-4.4
index c281231867..f448cba72f 100644
--- a/target/linux/oxnas/config-4.4
+++ b/target/linux/oxnas/config-4.4
@@ -243,8 +243,7 @@ CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_OXNAS=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
+# CONFIG_MTD_SPLIT_FIRMWARE is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts
index 712c03e425..5f7c2a1e94 100644
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts
@@ -34,15 +34,6 @@
nand@41000000 {
status = "okay";
- partition@0 {
- label = "boot";
- reg = <0x0 0x26c0000>;
- };
-
- partition@26c0000 {
- label = "ubi";
- reg = <0x26c0000 0xd940000>;
- };
};
ethernet@40400000 {
@@ -132,3 +123,24 @@
};
};
};
+
+&nandc {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "hamming";
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x026c0000>;
+ };
+
+ partition@26c0000 {
+ label = "ubi";
+ reg = <0x026c0000 0x0d940000>;
+ };
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
index 1312fd63b5..a59addccac 100644
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
@@ -31,37 +31,6 @@
nr-ports = <2>;
};
- nand@41000000 {
- status = "okay";
-
- partition@0 {
- label = "stage1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot";
- reg = <0x00040000 0x00200000>;
- read-only;
- };
-
- partition@240000 {
- label = "initrd";
- reg = <0x00240000 0x00600000>;
- };
-
- partition@840000 {
- label = "kernel";
- reg = <0x00840000 0x007C0000>;
- };
-
- partition@e00000 {
- label = "ubi";
- reg = <0x01000000 0x07000000>;
- };
- };
-
ethernet@40400000 {
status = "okay";
snps,phy-addr = <1>;
@@ -163,3 +132,42 @@
gpios = <&GPIOA 9 0>;
};
};
+
+&nandc {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "hamming";
+
+ partition@0 {
+ label = "stage1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot";
+ reg = <0x00040000 0x00200000>;
+ read-only;
+ };
+
+ partition@240000 {
+ label = "initrd";
+ reg = <0x00240000 0x00600000>;
+ };
+
+ partition@840000 {
+ label = "kernel";
+ reg = <0x00840000 0x007C0000>;
+ };
+
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x01000000 0x07000000>;
+ };
+ };
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts
index f3730c32a6..5b087e93fa 100644
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts
@@ -28,21 +28,6 @@
status = "okay";
};
- nand@41000000 {
- status = "okay";
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00e00000>;
- /*read-only;*/
- };
-
- partition@e00000 {
- label = "ubi";
- reg = <0x00e00000 0x07200000>;
- };
- };
-
ethernet@40400000 {
status = "okay";
};
@@ -84,3 +69,26 @@
};
};
};
+
+&nandc {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "hamming";
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x00e00000>;
+ /*read-only;*/
+ };
+
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x00e00000 0x07200000>;
+ };
+ };
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts
index 802913273b..be0f6c9077 100644
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts
@@ -25,21 +25,6 @@
status = "okay";
};
- nand@41000000 {
- status = "okay";
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00e00000>;
- /*read-only;*/
- };
-
- partition@e00000 {
- label = "ubi";
- reg = <0x00e00000 0x07200000>;
- };
- };
-
ethernet@40400000 {
status = "okay";
};
@@ -81,3 +66,26 @@
};
};
+
+&nandc {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "hamming";
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x00e00000>;
+ /*read-only;*/
+ };
+
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x00e00000 0x07200000>;
+ };
+ };
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts
index a8112c947c..ad93d4ec15 100644
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts
@@ -27,20 +27,6 @@
status = "okay";
};
- nand@41000000 {
- status = "okay";
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00e00000>;
- /*read-only;*/
- };
-
- partition@e00000 {
- label = "ubi";
- reg = <0x00e00000 0x07200000>;
- };
- };
ethernet@40400000 {
status = "okay";
@@ -91,3 +77,26 @@
};
};
+
+&nandc {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "hamming";
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x00e00000>;
+ read-only;
+ };
+
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x00e00000 0x07200000>;
+ };
+ };
+};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi
index 4ba4b8b086..c096a7d1c3 100644
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi
@@ -298,16 +298,15 @@
status = "disabled";
};
- nand@41000000 {
- compatible = "plxtech,nand-nas782x", "gen_nand";
- reg = <0x41000000 0x100000>, <0x41C00000 0x20>;
- nand-ecc-mode = "soft";
+ nandc: nand-controller@41000000 {
+ compatible = "oxsemi,ox820-nand";
+ reg = <0x41000000 0x100000>;
clocks = <&stdclk 9>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand0>;
resets = <&rst 15>;
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
diff --git a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c
index 9536e5179c..6cb17cd70e 100644
--- a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c
+++ b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c
@@ -1,94 +1,211 @@
/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
+ * Oxford Semiconductor OXNAS NAND driver
+
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ * Heavily based on plat_nand.c :
+ * Author: Vitaly Wool <vitalywool@gmail.com>
+ * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*
- * based on xway_nand.c
- * Copyright © 2012 John Crispin <blogic@openwrt.org>
- * and oxnas_nand.c "NAND glue for Oxnas platforms"
- * written by Ma Haijun <mahaijuns@gmail.com>
*/
-#include <linux/mtd/nand.h>
-#include <linux/of_gpio.h>
-#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/reset.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+
+/* Nand commands */
+#define OXNAS_NAND_CMD_ALE BIT(18)
+#define OXNAS_NAND_CMD_CLE BIT(19)
+
+#define OXNAS_NAND_MAX_CHIPS 1
+
+struct oxnas_nand {
+ struct nand_hw_control base;
+ void __iomem *io_base;
+ struct clk *clk;
+ struct nand_chip *chips[OXNAS_NAND_MAX_CHIPS];
+ unsigned long ctrl;
+ struct mtd_partition *partitions;
+ int nr_partitions;
+};
+
+static uint8_t oxnas_nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct oxnas_nand *oxnas = nand_get_controller_data(chip);
-/* nand commands */
-#define NAND_CMD_ALE BIT(18)
-#define NAND_CMD_CLE BIT(19)
-#define NAND_CMD_CS 0
-#define NAND_CMD_RESET 0xff
-#define NAND_CMD (NAND_CMD_CS | NAND_CMD_CLE)
-#define NAND_ADDR (NAND_CMD_CS | NAND_CMD_ALE)
-#define NAND_DATA (NAND_CMD_CS)
+ return readb(oxnas->io_base);
+}
-static void oxnas_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void oxnas_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
- struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct oxnas_nand *oxnas = nand_get_controller_data(chip);
+
+ ioread8_rep(oxnas->io_base, buf, len);
+}
+
+static void oxnas_nand_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct oxnas_nand *oxnas = nand_get_controller_data(chip);
+
+ iowrite8_rep(oxnas->io_base + oxnas->ctrl, buf, len);
+}
+
+/* Single CS command control */
+static void oxnas_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct oxnas_nand *oxnas = nand_get_controller_data(chip);
if (ctrl & NAND_CTRL_CHANGE) {
- nandaddr &= ~(NAND_CMD | NAND_ADDR);
if (ctrl & NAND_CLE)
- nandaddr |= NAND_CMD;
+ oxnas->ctrl = OXNAS_NAND_CMD_CLE;
else if (ctrl & NAND_ALE)
- nandaddr |= NAND_ADDR;
- this->IO_ADDR_W = (void __iomem *) nandaddr;
+ oxnas->ctrl = OXNAS_NAND_CMD_ALE;
+ else
+ oxnas->ctrl = 0;
}
if (cmd != NAND_CMD_NONE)
- writeb(cmd, (void __iomem *) nandaddr);
+ writeb(cmd, oxnas->io_base + oxnas->ctrl);
}
+/*
+ * Probe for the NAND device.
+ */
static int oxnas_nand_probe(struct platform_device *pdev)
{
- /* enable clock and release static block reset */
- struct clk *clk = of_clk_get(pdev->dev.of_node, 0);
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *nand_np;
+ struct oxnas_nand *oxnas;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ struct resource *res;
+ int nchips = 0;
+ int count = 0;
+ int err = 0;
- if (IS_ERR(clk))
- return PTR_ERR(clk);
+ /* Allocate memory for the device structure (and zero it) */
+ oxnas = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip),
+ GFP_KERNEL);
+ if (!oxnas)
+ return -ENOMEM;
- clk_prepare_enable(clk);
- device_reset(&pdev->dev);
+ nand_hw_control_init(&oxnas->base);
- return 0;
-}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ oxnas->io_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(oxnas->io_base))
+ return PTR_ERR(oxnas->io_base);
-/* allow users to override the partition in DT using the cmdline */
-static const char * part_probes[] = { "cmdlinepart", "ofpart", NULL };
+ oxnas->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(oxnas->clk))
+ oxnas->clk = NULL;
-static struct platform_nand_data oxnas_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_delay = 30,
- .part_probe_types = part_probes,
- },
- .ctrl = {
- .probe = oxnas_nand_probe,
- .cmd_ctrl = oxnas_cmd_ctrl,
+ /* Only a single chip node is supported */
+ count = of_get_child_count(np);
+ pr_info("########### count: %d\n", count);
+ if (count > 1)
+ return -EINVAL;
+
+ clk_prepare_enable(oxnas->clk);
+ device_reset_optional(&pdev->dev);
+
+ for_each_child_of_node(np, nand_np) {
+ chip = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip),
+ GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->controller = &oxnas->base;
+
+ nand_set_flash_node(chip, nand_np);
+ nand_set_controller_data(chip, oxnas);
+
+ mtd = nand_to_mtd(chip);
+ mtd->dev.parent = &pdev->dev;
+ mtd->priv = chip;
+
+ chip->cmd_ctrl = oxnas_nand_cmd_ctrl;
+ chip->read_buf = oxnas_nand_read_buf;
+ chip->read_byte = oxnas_nand_read_byte;
+ chip->write_buf = oxnas_nand_write_buf;
+ chip->chip_delay = 30;
+
+ /* Scan to find existence of the device */
+ err = nand_scan(mtd, 1);
+ pr_info("########### nand_scan err: %d\n", err);
+ if (err)
+ return err;
+
+ err = mtd_device_register(mtd, NULL, 0);
+ pr_info("########### mtd_device_register err: %d\n", err);
+ if (err) {
+ nand_release(mtd);
+ return err;
+ }
+
+ oxnas->chips[nchips] = chip;
+ ++nchips;
}
-};
-/*
- * Try to find the node inside the DT. If it is available attach out
- * platform_nand_data
- */
-static int __init oxnas_register_nand(void)
+ pr_info("########### nchips: %d\n", nchips);
+
+ /* Exit if no chips found */
+ if (!nchips)
+ return -ENODEV;
+
+ platform_set_drvdata(pdev, oxnas);
+
+ return 0;
+}
+
+static int oxnas_nand_remove(struct platform_device *pdev)
{
- struct device_node *node;
- struct platform_device *pdev;
-
- node = of_find_compatible_node(NULL, NULL, "plxtech,nand-nas782x");
- if (!node)
- return -ENOENT;
- pdev = of_find_device_by_node(node);
- if (!pdev)
- return -EINVAL;
- pdev->dev.platform_data = &oxnas_nand_data;
- of_node_put(node);
+ struct oxnas_nand *oxnas = platform_get_drvdata(pdev);
+
+ if (oxnas->chips[0])
+ nand_release(nand_to_mtd(oxnas->chips[0]));
+
+ clk_disable_unprepare(oxnas->clk);
+
return 0;
}
-subsys_initcall(oxnas_register_nand);
+static const struct of_device_id oxnas_nand_match[] = {
+ { .compatible = "oxsemi,ox820-nand" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, oxnas_nand_match);
+
+static struct platform_driver oxnas_nand_driver = {
+ .probe = oxnas_nand_probe,
+ .remove = oxnas_nand_remove,
+ .driver = {
+ .name = "oxnas_nand",
+ .of_match_table = oxnas_nand_match,
+ },
+};
+
+module_platform_driver(oxnas_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Oxnas NAND driver");
+MODULE_ALIAS("platform:oxnas_nand");
diff --git a/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch b/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch
new file mode 100644
index 0000000000..2fbbd774c9
--- /dev/null
+++ b/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch
@@ -0,0 +1,5300 @@
+From a369af5149e6eb442b22ce89b564dd7a76e03638 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 26 Apr 2016 19:05:01 +0200
+Subject: [PATCH 072/102] mtd: backport v4.7-0day patches from Boris
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/Kconfig | 4 +-
+ drivers/mtd/cmdlinepart.c | 3 +-
+ drivers/mtd/devices/m25p80.c | 44 +--
+ drivers/mtd/maps/physmap_of.c | 6 +-
+ drivers/mtd/mtdchar.c | 123 ++++++--
+ drivers/mtd/mtdconcat.c | 2 +-
+ drivers/mtd/mtdcore.c | 428 ++++++++++++++++++++++++--
+ drivers/mtd/mtdcore.h | 7 +-
+ drivers/mtd/mtdpart.c | 161 ++++++----
+ drivers/mtd/mtdswap.c | 24 +-
+ drivers/mtd/nand/Kconfig | 21 +-
+ drivers/mtd/nand/Makefile | 2 +
+ drivers/mtd/nand/nand_base.c | 571 +++++++++++++++++++----------------
+ drivers/mtd/nand/nand_bbt.c | 34 +--
+ drivers/mtd/nand/nand_bch.c | 52 ++--
+ drivers/mtd/nand/nand_ecc.c | 6 +-
+ drivers/mtd/nand/nand_ids.c | 4 +-
+ drivers/mtd/nand/nandsim.c | 43 +--
+ drivers/mtd/ofpart.c | 53 ++--
+ drivers/mtd/spi-nor/Kconfig | 10 +-
+ drivers/mtd/spi-nor/Makefile | 1 +
+ drivers/mtd/spi-nor/mtk-quadspi.c | 485 +++++++++++++++++++++++++++++
+ drivers/mtd/spi-nor/spi-nor.c | 321 +++++++++++++-------
+ drivers/mtd/tests/mtd_nandecctest.c | 2 +-
+ drivers/mtd/tests/oobtest.c | 49 ++-
+ drivers/mtd/tests/pagetest.c | 3 +-
+ include/linux/mtd/bbm.h | 1 -
+ include/linux/mtd/fsmc.h | 18 --
+ include/linux/mtd/inftl.h | 1 -
+ include/linux/mtd/map.h | 9 +-
+ include/linux/mtd/mtd.h | 80 ++++-
+ include/linux/mtd/nand.h | 94 ++++--
+ include/linux/mtd/nand_bch.h | 10 +-
+ include/linux/mtd/nftl.h | 1 -
+ include/linux/mtd/onenand.h | 2 -
+ include/linux/mtd/partitions.h | 27 +-
+ include/linux/mtd/sh_flctl.h | 4 +-
+ include/linux/mtd/sharpsl.h | 2 +-
+ include/linux/mtd/spi-nor.h | 23 +-
+ include/uapi/mtd/mtd-abi.h | 2 +-
+ 45 files changed, 2077 insertions(+), 748 deletions(-)
+ create mode 100644 drivers/mtd/spi-nor/mtk-quadspi.c
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -131,7 +131,7 @@ config MTD_CMDLINE_PARTS
+
+ config MTD_AFS_PARTS
+ tristate "ARM Firmware Suite partition parsing"
+- depends on ARM
++ depends on (ARM || ARM64)
+ ---help---
+ The ARM Firmware Suite allows the user to divide flash devices into
+ multiple 'images'. Each such image has a header containing its name
+@@ -161,7 +161,7 @@ config MTD_AR7_PARTS
+
+ config MTD_BCM63XX_PARTS
+ tristate "BCM63XX CFE partitioning support"
+- depends on BCM63XX
++ depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ select CRC32
+ help
+ This provides partions parsing for BCM63xx devices with CFE
+--- a/drivers/mtd/cmdlinepart.c
++++ b/drivers/mtd/cmdlinepart.c
+@@ -304,7 +304,7 @@ static int mtdpart_setup_real(char *s)
+ * the first one in the chain if a NULL mtd_id is passed in.
+ */
+ static int parse_cmdline_partitions(struct mtd_info *master,
+- struct mtd_partition **pparts,
++ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+ {
+ unsigned long long offset;
+@@ -382,7 +382,6 @@ static int __init mtdpart_setup(char *s)
+ __setup("mtdparts=", mtdpart_setup);
+
+ static struct mtd_part_parser cmdline_parser = {
+- .owner = THIS_MODULE,
+ .parse_fn = parse_cmdline_partitions,
+ .name = "cmdlinepart",
+ };
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -174,22 +174,6 @@ static int m25p80_read(struct spi_nor *n
+ return 0;
+ }
+
+-static int m25p80_erase(struct spi_nor *nor, loff_t offset)
+-{
+- struct m25p *flash = nor->priv;
+-
+- dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
+- flash->spi_nor.mtd.erasesize / 1024, (u32)offset);
+-
+- /* Set up command buffer. */
+- flash->command[0] = nor->erase_opcode;
+- m25p_addr2cmd(nor, offset, flash->command);
+-
+- spi_write(flash->spi, flash->command, m25p_cmdsz(nor));
+-
+- return 0;
+-}
+-
+ /*
+ * board specific setup should have ensured the SPI clock used here
+ * matches what the READ command supports, at least until this driver
+@@ -197,12 +181,11 @@ static int m25p80_erase(struct spi_nor *
+ */
+ static int m25p_probe(struct spi_device *spi)
+ {
+- struct mtd_part_parser_data ppdata;
+ struct flash_platform_data *data;
+ struct m25p *flash;
+ struct spi_nor *nor;
+ enum read_mode mode = SPI_NOR_NORMAL;
+- char *flash_name = NULL;
++ char *flash_name;
+ int ret;
+
+ data = dev_get_platdata(&spi->dev);
+@@ -216,12 +199,11 @@ static int m25p_probe(struct spi_device
+ /* install the hooks */
+ nor->read = m25p80_read;
+ nor->write = m25p80_write;
+- nor->erase = m25p80_erase;
+ nor->write_reg = m25p80_write_reg;
+ nor->read_reg = m25p80_read_reg;
+
+ nor->dev = &spi->dev;
+- nor->flash_node = spi->dev.of_node;
++ spi_nor_set_flash_node(nor, spi->dev.of_node);
+ nor->priv = flash;
+
+ spi_set_drvdata(spi, flash);
+@@ -242,6 +224,8 @@ static int m25p_probe(struct spi_device
+ */
+ if (data && data->type)
+ flash_name = data->type;
++ else if (!strcmp(spi->modalias, "spi-nor"))
++ flash_name = NULL; /* auto-detect */
+ else
+ flash_name = spi->modalias;
+
+@@ -249,11 +233,8 @@ static int m25p_probe(struct spi_device
+ if (ret)
+ return ret;
+
+- ppdata.of_node = spi->dev.of_node;
+-
+- return mtd_device_parse_register(&nor->mtd, NULL, &ppdata,
+- data ? data->parts : NULL,
+- data ? data->nr_parts : 0);
++ return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
++ data ? data->nr_parts : 0);
+ }
+
+
+@@ -279,14 +260,21 @@ static int m25p_remove(struct spi_device
+ */
+ static const struct spi_device_id m25p_ids[] = {
+ /*
++ * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
++ * hack around the fact that the SPI core does not provide uevent
++ * matching for .of_match_table
++ */
++ {"spi-nor"},
++
++ /*
+ * Entries not used in DTs that should be safe to drop after replacing
+- * them with "nor-jedec" in platform data.
++ * them with "spi-nor" in platform data.
+ */
+ {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"},
+
+ /*
+- * Entries that were used in DTs without "nor-jedec" fallback and should
+- * be kept for backward compatibility.
++ * Entries that were used in DTs without "jedec,spi-nor" fallback and
++ * should be kept for backward compatibility.
+ */
+ {"at25df321a"}, {"at25df641"}, {"at26df081a"},
+ {"mr25h256"},
+--- a/drivers/mtd/maps/physmap_of.c
++++ b/drivers/mtd/maps/physmap_of.c
+@@ -128,7 +128,6 @@ static int of_flash_probe(struct platfor
+ int reg_tuple_size;
+ struct mtd_info **mtd_list = NULL;
+ resource_size_t res_size;
+- struct mtd_part_parser_data ppdata;
+ bool map_indirect;
+ const char *mtd_name = NULL;
+
+@@ -272,8 +271,9 @@ static int of_flash_probe(struct platfor
+ if (err)
+ goto err_out;
+
+- ppdata.of_node = dp;
+- mtd_device_parse_register(info->cmtd, part_probe_types_def, &ppdata,
++ info->cmtd->dev.parent = &dev->dev;
++ mtd_set_of_node(info->cmtd, dp);
++ mtd_device_parse_register(info->cmtd, part_probe_types_def, NULL,
+ NULL, 0);
+
+ kfree(mtd_list);
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -465,38 +465,111 @@ static int mtdchar_readoob(struct file *
+ }
+
+ /*
+- * Copies (and truncates, if necessary) data from the larger struct,
+- * nand_ecclayout, to the smaller, deprecated layout struct,
+- * nand_ecclayout_user. This is necessary only to support the deprecated
+- * API ioctl ECCGETLAYOUT while allowing all new functionality to use
+- * nand_ecclayout flexibly (i.e. the struct may change size in new
+- * releases without requiring major rewrites).
++ * Copies (and truncates, if necessary) OOB layout information to the
++ * deprecated layout struct, nand_ecclayout_user. This is necessary only to
++ * support the deprecated API ioctl ECCGETLAYOUT while allowing all new
++ * functionality to use mtd_ooblayout_ops flexibly (i.e. mtd_ooblayout_ops
++ * can describe any kind of OOB layout with almost zero overhead from a
++ * memory usage point of view).
+ */
+-static int shrink_ecclayout(const struct nand_ecclayout *from,
+- struct nand_ecclayout_user *to)
++static int shrink_ecclayout(struct mtd_info *mtd,
++ struct nand_ecclayout_user *to)
+ {
+- int i;
++ struct mtd_oob_region oobregion;
++ int i, section = 0, ret;
+
+- if (!from || !to)
++ if (!mtd || !to)
+ return -EINVAL;
+
+ memset(to, 0, sizeof(*to));
+
+- to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES);
+- for (i = 0; i < to->eccbytes; i++)
+- to->eccpos[i] = from->eccpos[i];
++ to->eccbytes = 0;
++ for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) {
++ u32 eccpos;
++
++ ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
++ if (ret < 0) {
++ if (ret != -ERANGE)
++ return ret;
++
++ break;
++ }
++
++ eccpos = oobregion.offset;
++ for (; i < MTD_MAX_ECCPOS_ENTRIES &&
++ eccpos < oobregion.offset + oobregion.length; i++) {
++ to->eccpos[i] = eccpos++;
++ to->eccbytes++;
++ }
++ }
+
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) {
+- if (from->oobfree[i].length == 0 &&
+- from->oobfree[i].offset == 0)
++ ret = mtd_ooblayout_free(mtd, i, &oobregion);
++ if (ret < 0) {
++ if (ret != -ERANGE)
++ return ret;
++
+ break;
+- to->oobavail += from->oobfree[i].length;
+- to->oobfree[i] = from->oobfree[i];
++ }
++
++ to->oobfree[i].offset = oobregion.offset;
++ to->oobfree[i].length = oobregion.length;
++ to->oobavail += to->oobfree[i].length;
+ }
+
+ return 0;
+ }
+
++static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to)
++{
++ struct mtd_oob_region oobregion;
++ int i, section = 0, ret;
++
++ if (!mtd || !to)
++ return -EINVAL;
++
++ memset(to, 0, sizeof(*to));
++
++ to->eccbytes = 0;
++ for (i = 0; i < ARRAY_SIZE(to->eccpos);) {
++ u32 eccpos;
++
++ ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
++ if (ret < 0) {
++ if (ret != -ERANGE)
++ return ret;
++
++ break;
++ }
++
++ if (oobregion.length + i > ARRAY_SIZE(to->eccpos))
++ return -EINVAL;
++
++ eccpos = oobregion.offset;
++ for (; eccpos < oobregion.offset + oobregion.length; i++) {
++ to->eccpos[i] = eccpos++;
++ to->eccbytes++;
++ }
++ }
++
++ for (i = 0; i < 8; i++) {
++ ret = mtd_ooblayout_free(mtd, i, &oobregion);
++ if (ret < 0) {
++ if (ret != -ERANGE)
++ return ret;
++
++ break;
++ }
++
++ to->oobfree[i][0] = oobregion.offset;
++ to->oobfree[i][1] = oobregion.length;
++ }
++
++ to->useecc = MTD_NANDECC_AUTOPLACE;
++
++ return 0;
++}
++
+ static int mtdchar_blkpg_ioctl(struct mtd_info *mtd,
+ struct blkpg_ioctl_arg *arg)
+ {
+@@ -815,16 +888,12 @@ static int mtdchar_ioctl(struct file *fi
+ {
+ struct nand_oobinfo oi;
+
+- if (!mtd->ecclayout)
++ if (!mtd->ooblayout)
+ return -EOPNOTSUPP;
+- if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos))
+- return -EINVAL;
+
+- oi.useecc = MTD_NANDECC_AUTOPLACE;
+- memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos));
+- memcpy(&oi.oobfree, mtd->ecclayout->oobfree,
+- sizeof(oi.oobfree));
+- oi.eccbytes = mtd->ecclayout->eccbytes;
++ ret = get_oobinfo(mtd, &oi);
++ if (ret)
++ return ret;
+
+ if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo)))
+ return -EFAULT;
+@@ -913,14 +982,14 @@ static int mtdchar_ioctl(struct file *fi
+ {
+ struct nand_ecclayout_user *usrlay;
+
+- if (!mtd->ecclayout)
++ if (!mtd->ooblayout)
+ return -EOPNOTSUPP;
+
+ usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL);
+ if (!usrlay)
+ return -ENOMEM;
+
+- shrink_ecclayout(mtd->ecclayout, usrlay);
++ shrink_ecclayout(mtd, usrlay);
+
+ if (copy_to_user(argp, usrlay, sizeof(*usrlay)))
+ ret = -EFAULT;
+--- a/drivers/mtd/mtdconcat.c
++++ b/drivers/mtd/mtdconcat.c
+@@ -777,7 +777,7 @@ struct mtd_info *mtd_concat_create(struc
+
+ }
+
+- concat->mtd.ecclayout = subdev[0]->ecclayout;
++ mtd_set_ooblayout(&concat->mtd, subdev[0]->ooblayout);
+
+ concat->num_subdev = num_devs;
+ concat->mtd.name = name;
+--- a/drivers/mtd/mtdcore.c
++++ b/drivers/mtd/mtdcore.c
+@@ -32,6 +32,7 @@
+ #include <linux/err.h>
+ #include <linux/ioctl.h>
+ #include <linux/init.h>
++#include <linux/of.h>
+ #include <linux/proc_fs.h>
+ #include <linux/idr.h>
+ #include <linux/backing-dev.h>
+@@ -446,6 +447,7 @@ int add_mtd_device(struct mtd_info *mtd)
+ mtd->dev.devt = MTD_DEVT(i);
+ dev_set_name(&mtd->dev, "mtd%d", i);
+ dev_set_drvdata(&mtd->dev, mtd);
++ of_node_get(mtd_get_of_node(mtd));
+ error = device_register(&mtd->dev);
+ if (error)
+ goto fail_added;
+@@ -477,6 +479,7 @@ int add_mtd_device(struct mtd_info *mtd)
+ return 0;
+
+ fail_added:
++ of_node_put(mtd_get_of_node(mtd));
+ idr_remove(&mtd_idr, i);
+ fail_locked:
+ mutex_unlock(&mtd_table_mutex);
+@@ -518,6 +521,7 @@ int del_mtd_device(struct mtd_info *mtd)
+ device_unregister(&mtd->dev);
+
+ idr_remove(&mtd_idr, mtd->index);
++ of_node_put(mtd_get_of_node(mtd));
+
+ module_put(THIS_MODULE);
+ ret = 0;
+@@ -529,9 +533,10 @@ out_error:
+ }
+
+ static int mtd_add_device_partitions(struct mtd_info *mtd,
+- struct mtd_partition *real_parts,
+- int nbparts)
++ struct mtd_partitions *parts)
+ {
++ const struct mtd_partition *real_parts = parts->parts;
++ int nbparts = parts->nr_parts;
+ int ret;
+
+ if (nbparts == 0 || IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) {
+@@ -600,29 +605,29 @@ int mtd_device_parse_register(struct mtd
+ const struct mtd_partition *parts,
+ int nr_parts)
+ {
++ struct mtd_partitions parsed;
+ int ret;
+- struct mtd_partition *real_parts = NULL;
+
+ mtd_set_dev_defaults(mtd);
+
+- ret = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
+- if (ret <= 0 && nr_parts && parts) {
+- real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
+- GFP_KERNEL);
+- if (!real_parts)
+- ret = -ENOMEM;
+- else
+- ret = nr_parts;
+- }
+- /* Didn't come up with either parsed OR fallback partitions */
+- if (ret < 0) {
+- pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n",
++ memset(&parsed, 0, sizeof(parsed));
++
++ ret = parse_mtd_partitions(mtd, types, &parsed, parser_data);
++ if ((ret < 0 || parsed.nr_parts == 0) && parts && nr_parts) {
++ /* Fall back to driver-provided partitions */
++ parsed = (struct mtd_partitions){
++ .parts = parts,
++ .nr_parts = nr_parts,
++ };
++ } else if (ret < 0) {
++ /* Didn't come up with parsed OR fallback partitions */
++ pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n",
+ ret);
+ /* Don't abort on errors; we can still use unpartitioned MTD */
+- ret = 0;
++ memset(&parsed, 0, sizeof(parsed));
+ }
+
+- ret = mtd_add_device_partitions(mtd, real_parts, ret);
++ ret = mtd_add_device_partitions(mtd, &parsed);
+ if (ret)
+ goto out;
+
+@@ -642,7 +647,8 @@ int mtd_device_parse_register(struct mtd
+ }
+
+ out:
+- kfree(real_parts);
++ /* Cleanup any parsed partitions */
++ mtd_part_parser_cleanup(&parsed);
+ return ret;
+ }
+ EXPORT_SYMBOL_GPL(mtd_device_parse_register);
+@@ -767,7 +773,6 @@ out:
+ }
+ EXPORT_SYMBOL_GPL(get_mtd_device);
+
+-
+ int __get_mtd_device(struct mtd_info *mtd)
+ {
+ int err;
+@@ -1001,6 +1006,366 @@ int mtd_read_oob(struct mtd_info *mtd, l
+ }
+ EXPORT_SYMBOL_GPL(mtd_read_oob);
+
++/**
++ * mtd_ooblayout_ecc - Get the OOB region definition of a specific ECC section
++ * @mtd: MTD device structure
++ * @section: ECC section. Depending on the layout you may have all the ECC
++ * bytes stored in a single contiguous section, or one section
++ * per ECC chunk (and sometime several sections for a single ECC
++ * ECC chunk)
++ * @oobecc: OOB region struct filled with the appropriate ECC position
++ * information
++ *
++ * This functions return ECC section information in the OOB area. I you want
++ * to get all the ECC bytes information, then you should call
++ * mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobecc)
++{
++ memset(oobecc, 0, sizeof(*oobecc));
++
++ if (!mtd || section < 0)
++ return -EINVAL;
++
++ if (!mtd->ooblayout || !mtd->ooblayout->ecc)
++ return -ENOTSUPP;
++
++ return mtd->ooblayout->ecc(mtd, section, oobecc);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc);
++
++/**
++ * mtd_ooblayout_free - Get the OOB region definition of a specific free
++ * section
++ * @mtd: MTD device structure
++ * @section: Free section you are interested in. Depending on the layout
++ * you may have all the free bytes stored in a single contiguous
++ * section, or one section per ECC chunk plus an extra section
++ * for the remaining bytes (or other funky layout).
++ * @oobfree: OOB region struct filled with the appropriate free position
++ * information
++ *
++ * This functions return free bytes position in the OOB area. I you want
++ * to get all the free bytes information, then you should call
++ * mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_free(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobfree)
++{
++ memset(oobfree, 0, sizeof(*oobfree));
++
++ if (!mtd || section < 0)
++ return -EINVAL;
++
++ if (!mtd->ooblayout || !mtd->ooblayout->free)
++ return -ENOTSUPP;
++
++ return mtd->ooblayout->free(mtd, section, oobfree);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_free);
++
++/**
++ * mtd_ooblayout_find_region - Find the region attached to a specific byte
++ * @mtd: mtd info structure
++ * @byte: the byte we are searching for
++ * @sectionp: pointer where the section id will be stored
++ * @oobregion: used to retrieve the ECC position
++ * @iter: iterator function. Should be either mtd_ooblayout_free or
++ * mtd_ooblayout_ecc depending on the region type you're searching for
++ *
++ * This functions returns the section id and oobregion information of a
++ * specific byte. For example, say you want to know where the 4th ECC byte is
++ * stored, you'll use:
++ *
++ * mtd_ooblayout_find_region(mtd, 3, &section, &oobregion, mtd_ooblayout_ecc);
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++static int mtd_ooblayout_find_region(struct mtd_info *mtd, int byte,
++ int *sectionp, struct mtd_oob_region *oobregion,
++ int (*iter)(struct mtd_info *,
++ int section,
++ struct mtd_oob_region *oobregion))
++{
++ int pos = 0, ret, section = 0;
++
++ memset(oobregion, 0, sizeof(*oobregion));
++
++ while (1) {
++ ret = iter(mtd, section, oobregion);
++ if (ret)
++ return ret;
++
++ if (pos + oobregion->length > byte)
++ break;
++
++ pos += oobregion->length;
++ section++;
++ }
++
++ /*
++ * Adjust region info to make it start at the beginning at the
++ * 'start' ECC byte.
++ */
++ oobregion->offset += byte - pos;
++ oobregion->length -= byte - pos;
++ *sectionp = section;
++
++ return 0;
++}
++
++/**
++ * mtd_ooblayout_find_eccregion - Find the ECC region attached to a specific
++ * ECC byte
++ * @mtd: mtd info structure
++ * @eccbyte: the byte we are searching for
++ * @sectionp: pointer where the section id will be stored
++ * @oobregion: OOB region information
++ *
++ * Works like mtd_ooblayout_find_region() except it searches for a specific ECC
++ * byte.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
++ int *section,
++ struct mtd_oob_region *oobregion)
++{
++ return mtd_ooblayout_find_region(mtd, eccbyte, section, oobregion,
++ mtd_ooblayout_ecc);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_find_eccregion);
++
++/**
++ * mtd_ooblayout_get_bytes - Extract OOB bytes from the oob buffer
++ * @mtd: mtd info structure
++ * @buf: destination buffer to store OOB bytes
++ * @oobbuf: OOB buffer
++ * @start: first byte to retrieve
++ * @nbytes: number of bytes to retrieve
++ * @iter: section iterator
++ *
++ * Extract bytes attached to a specific category (ECC or free)
++ * from the OOB buffer and copy them into buf.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++static int mtd_ooblayout_get_bytes(struct mtd_info *mtd, u8 *buf,
++ const u8 *oobbuf, int start, int nbytes,
++ int (*iter)(struct mtd_info *,
++ int section,
++ struct mtd_oob_region *oobregion))
++{
++ struct mtd_oob_region oobregion = { };
++ int section = 0, ret;
++
++ ret = mtd_ooblayout_find_region(mtd, start, &section,
++ &oobregion, iter);
++
++ while (!ret) {
++ int cnt;
++
++ cnt = oobregion.length > nbytes ? nbytes : oobregion.length;
++ memcpy(buf, oobbuf + oobregion.offset, cnt);
++ buf += cnt;
++ nbytes -= cnt;
++
++ if (!nbytes)
++ break;
++
++ ret = iter(mtd, ++section, &oobregion);
++ }
++
++ return ret;
++}
++
++/**
++ * mtd_ooblayout_set_bytes - put OOB bytes into the oob buffer
++ * @mtd: mtd info structure
++ * @buf: source buffer to get OOB bytes from
++ * @oobbuf: OOB buffer
++ * @start: first OOB byte to set
++ * @nbytes: number of OOB bytes to set
++ * @iter: section iterator
++ *
++ * Fill the OOB buffer with data provided in buf. The category (ECC or free)
++ * is selected by passing the appropriate iterator.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++static int mtd_ooblayout_set_bytes(struct mtd_info *mtd, const u8 *buf,
++ u8 *oobbuf, int start, int nbytes,
++ int (*iter)(struct mtd_info *,
++ int section,
++ struct mtd_oob_region *oobregion))
++{
++ struct mtd_oob_region oobregion = { };
++ int section = 0, ret;
++
++ ret = mtd_ooblayout_find_region(mtd, start, &section,
++ &oobregion, iter);
++
++ while (!ret) {
++ int cnt;
++
++ cnt = oobregion.length > nbytes ? nbytes : oobregion.length;
++ memcpy(oobbuf + oobregion.offset, buf, cnt);
++ buf += cnt;
++ nbytes -= cnt;
++
++ if (!nbytes)
++ break;
++
++ ret = iter(mtd, ++section, &oobregion);
++ }
++
++ return ret;
++}
++
++/**
++ * mtd_ooblayout_count_bytes - count the number of bytes in a OOB category
++ * @mtd: mtd info structure
++ * @iter: category iterator
++ *
++ * Count the number of bytes in a given category.
++ *
++ * Returns a positive value on success, a negative error code otherwise.
++ */
++static int mtd_ooblayout_count_bytes(struct mtd_info *mtd,
++ int (*iter)(struct mtd_info *,
++ int section,
++ struct mtd_oob_region *oobregion))
++{
++ struct mtd_oob_region oobregion = { };
++ int section = 0, ret, nbytes = 0;
++
++ while (1) {
++ ret = iter(mtd, section++, &oobregion);
++ if (ret) {
++ if (ret == -ERANGE)
++ ret = nbytes;
++ break;
++ }
++
++ nbytes += oobregion.length;
++ }
++
++ return ret;
++}
++
++/**
++ * mtd_ooblayout_get_eccbytes - extract ECC bytes from the oob buffer
++ * @mtd: mtd info structure
++ * @eccbuf: destination buffer to store ECC bytes
++ * @oobbuf: OOB buffer
++ * @start: first ECC byte to retrieve
++ * @nbytes: number of ECC bytes to retrieve
++ *
++ * Works like mtd_ooblayout_get_bytes(), except it acts on ECC bytes.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
++ const u8 *oobbuf, int start, int nbytes)
++{
++ return mtd_ooblayout_get_bytes(mtd, eccbuf, oobbuf, start, nbytes,
++ mtd_ooblayout_ecc);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_get_eccbytes);
++
++/**
++ * mtd_ooblayout_set_eccbytes - set ECC bytes into the oob buffer
++ * @mtd: mtd info structure
++ * @eccbuf: source buffer to get ECC bytes from
++ * @oobbuf: OOB buffer
++ * @start: first ECC byte to set
++ * @nbytes: number of ECC bytes to set
++ *
++ * Works like mtd_ooblayout_set_bytes(), except it acts on ECC bytes.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
++ u8 *oobbuf, int start, int nbytes)
++{
++ return mtd_ooblayout_set_bytes(mtd, eccbuf, oobbuf, start, nbytes,
++ mtd_ooblayout_ecc);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_set_eccbytes);
++
++/**
++ * mtd_ooblayout_get_databytes - extract data bytes from the oob buffer
++ * @mtd: mtd info structure
++ * @databuf: destination buffer to store ECC bytes
++ * @oobbuf: OOB buffer
++ * @start: first ECC byte to retrieve
++ * @nbytes: number of ECC bytes to retrieve
++ *
++ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
++ const u8 *oobbuf, int start, int nbytes)
++{
++ return mtd_ooblayout_get_bytes(mtd, databuf, oobbuf, start, nbytes,
++ mtd_ooblayout_free);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_get_databytes);
++
++/**
++ * mtd_ooblayout_get_eccbytes - set data bytes into the oob buffer
++ * @mtd: mtd info structure
++ * @eccbuf: source buffer to get data bytes from
++ * @oobbuf: OOB buffer
++ * @start: first ECC byte to set
++ * @nbytes: number of ECC bytes to set
++ *
++ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
++ u8 *oobbuf, int start, int nbytes)
++{
++ return mtd_ooblayout_set_bytes(mtd, databuf, oobbuf, start, nbytes,
++ mtd_ooblayout_free);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_set_databytes);
++
++/**
++ * mtd_ooblayout_count_freebytes - count the number of free bytes in OOB
++ * @mtd: mtd info structure
++ *
++ * Works like mtd_ooblayout_count_bytes(), except it count free bytes.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_count_freebytes(struct mtd_info *mtd)
++{
++ return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_free);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_count_freebytes);
++
++/**
++ * mtd_ooblayout_count_freebytes - count the number of ECC bytes in OOB
++ * @mtd: mtd info structure
++ *
++ * Works like mtd_ooblayout_count_bytes(), except it count ECC bytes.
++ *
++ * Returns zero on success, a negative error code otherwise.
++ */
++int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd)
++{
++ return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_ecc);
++}
++EXPORT_SYMBOL_GPL(mtd_ooblayout_count_eccbytes);
++
+ /*
+ * Method to access the protection register area, present in some flash
+ * devices. The user data is one time programmable but the factory data is read
+--- a/drivers/mtd/mtdcore.h
++++ b/drivers/mtd/mtdcore.h
+@@ -10,10 +10,15 @@ int add_mtd_device(struct mtd_info *mtd)
+ int del_mtd_device(struct mtd_info *mtd);
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
++
++struct mtd_partitions;
++
+ int parse_mtd_partitions(struct mtd_info *master, const char * const *types,
+- struct mtd_partition **pparts,
++ struct mtd_partitions *pparts,
+ struct mtd_part_parser_data *data);
+
++void mtd_part_parser_cleanup(struct mtd_partitions *parts);
++
+ int __init init_mtdchar(void);
+ void __exit cleanup_mtdchar(void);
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -55,9 +55,12 @@ static void mtd_partition_split(struct m
+
+ /*
+ * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
+- * the pointer to that structure with this macro.
++ * the pointer to that structure.
+ */
+-#define PART(x) ((struct mtd_part *)(x))
++static inline struct mtd_part *mtd_to_part(const struct mtd_info *mtd)
++{
++ return container_of(mtd, struct mtd_part, mtd);
++}
+
+
+ /*
+@@ -68,7 +71,7 @@ static void mtd_partition_split(struct m
+ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ struct mtd_ecc_stats stats;
+ int res;
+
+@@ -87,7 +90,7 @@ static int part_read(struct mtd_info *mt
+ static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+
+ return part->master->_point(part->master, from + part->offset, len,
+ retlen, virt, phys);
+@@ -95,7 +98,7 @@ static int part_point(struct mtd_info *m
+
+ static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+
+ return part->master->_unpoint(part->master, from + part->offset, len);
+ }
+@@ -105,7 +108,7 @@ static unsigned long part_get_unmapped_a
+ unsigned long offset,
+ unsigned long flags)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+
+ offset += part->offset;
+ return part->master->_get_unmapped_area(part->master, len, offset,
+@@ -115,7 +118,7 @@ static unsigned long part_get_unmapped_a
+ static int part_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ int res;
+
+ if (from >= mtd->size)
+@@ -130,10 +133,7 @@ static int part_read_oob(struct mtd_info
+ if (ops->oobbuf) {
+ size_t len, pages;
+
+- if (ops->mode == MTD_OPS_AUTO_OOB)
+- len = mtd->oobavail;
+- else
+- len = mtd->oobsize;
++ len = mtd_oobavail(mtd, ops);
+ pages = mtd_div_by_ws(mtd->size, mtd);
+ pages -= mtd_div_by_ws(from, mtd);
+ if (ops->ooboffs + ops->ooblen > pages * len)
+@@ -153,7 +153,7 @@ static int part_read_oob(struct mtd_info
+ static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_read_user_prot_reg(part->master, from, len,
+ retlen, buf);
+ }
+@@ -161,7 +161,7 @@ static int part_read_user_prot_reg(struc
+ static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_get_user_prot_info(part->master, len, retlen,
+ buf);
+ }
+@@ -169,7 +169,7 @@ static int part_get_user_prot_info(struc
+ static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_read_fact_prot_reg(part->master, from, len,
+ retlen, buf);
+ }
+@@ -177,7 +177,7 @@ static int part_read_fact_prot_reg(struc
+ static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_get_fact_prot_info(part->master, len, retlen,
+ buf);
+ }
+@@ -185,7 +185,7 @@ static int part_get_fact_prot_info(struc
+ static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_write(part->master, to + part->offset, len,
+ retlen, buf);
+ }
+@@ -193,7 +193,7 @@ static int part_write(struct mtd_info *m
+ static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_panic_write(part->master, to + part->offset, len,
+ retlen, buf);
+ }
+@@ -201,7 +201,7 @@ static int part_panic_write(struct mtd_i
+ static int part_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+
+ if (to >= mtd->size)
+ return -EINVAL;
+@@ -213,7 +213,7 @@ static int part_write_oob(struct mtd_inf
+ static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_write_user_prot_reg(part->master, from, len,
+ retlen, buf);
+ }
+@@ -221,21 +221,21 @@ static int part_write_user_prot_reg(stru
+ static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
+ size_t len)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_lock_user_prot_reg(part->master, from, len);
+ }
+
+ static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
+ unsigned long count, loff_t to, size_t *retlen)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_writev(part->master, vecs, count,
+ to + part->offset, retlen);
+ }
+
+ static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ int ret;
+
+
+@@ -299,7 +299,7 @@ static int part_erase(struct mtd_info *m
+ void mtd_erase_callback(struct erase_info *instr)
+ {
+ if (instr->mtd->_erase == part_erase) {
+- struct mtd_part *part = PART(instr->mtd);
++ struct mtd_part *part = mtd_to_part(instr->mtd);
+ size_t wrlen = 0;
+
+ if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
+@@ -330,13 +330,13 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback);
+
+ static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_lock(part->master, ofs + part->offset, len);
+ }
+
+ static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+
+ ofs += part->offset;
+ if (mtd->flags & MTD_ERASE_PARTIAL) {
+@@ -349,45 +349,45 @@ static int part_unlock(struct mtd_info *
+
+ static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_is_locked(part->master, ofs + part->offset, len);
+ }
+
+ static void part_sync(struct mtd_info *mtd)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ part->master->_sync(part->master);
+ }
+
+ static int part_suspend(struct mtd_info *mtd)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return part->master->_suspend(part->master);
+ }
+
+ static void part_resume(struct mtd_info *mtd)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ part->master->_resume(part->master);
+ }
+
+ static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ ofs += part->offset;
+ return part->master->_block_isreserved(part->master, ofs);
+ }
+
+ static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ ofs += part->offset;
+ return part->master->_block_isbad(part->master, ofs);
+ }
+
+ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
+ {
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ int res;
+
+ ofs += part->offset;
+@@ -397,6 +397,27 @@ static int part_block_markbad(struct mtd
+ return res;
+ }
+
++static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobregion)
++{
++ struct mtd_part *part = mtd_to_part(mtd);
++
++ return mtd_ooblayout_ecc(part->master, section, oobregion);
++}
++
++static int part_ooblayout_free(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobregion)
++{
++ struct mtd_part *part = mtd_to_part(mtd);
++
++ return mtd_ooblayout_free(part->master, section, oobregion);
++}
++
++static const struct mtd_ooblayout_ops part_ooblayout_ops = {
++ .ecc = part_ooblayout_ecc,
++ .free = part_ooblayout_free,
++};
++
+ static inline void free_partition(struct mtd_part *p)
+ {
+ kfree(p->mtd.name);
+@@ -614,7 +635,7 @@ static struct mtd_part *allocate_partiti
+ slave->mtd.erasesize = slave->mtd.size;
+ }
+
+- slave->mtd.ecclayout = master->ecclayout;
++ mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
+ slave->mtd.ecc_step_size = master->ecc_step_size;
+ slave->mtd.ecc_strength = master->ecc_strength;
+ slave->mtd.bitflip_threshold = master->bitflip_threshold;
+@@ -639,7 +660,7 @@ static ssize_t mtd_partition_offset_show
+ struct device_attribute *attr, char *buf)
+ {
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+- struct mtd_part *part = PART(mtd);
++ struct mtd_part *part = mtd_to_part(mtd);
+ return snprintf(buf, PAGE_SIZE, "%lld\n", part->offset);
+ }
+
+@@ -677,11 +698,10 @@ int mtd_add_partition(struct mtd_info *m
+ if (length <= 0)
+ return -EINVAL;
+
++ memset(&part, 0, sizeof(part));
+ part.name = name;
+ part.size = length;
+ part.offset = offset;
+- part.mask_flags = 0;
+- part.ecclayout = NULL;
+
+ new = allocate_partition(master, &part, -1, offset);
+ if (IS_ERR(new))
+@@ -845,7 +865,7 @@ int add_mtd_partitions(struct mtd_info *
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+
+-static struct mtd_part_parser *get_partition_parser(const char *name)
++static struct mtd_part_parser *mtd_part_parser_get(const char *name)
+ {
+ struct mtd_part_parser *p, *ret = NULL;
+
+@@ -862,7 +882,20 @@ static struct mtd_part_parser *get_parti
+ return ret;
+ }
+
+-#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
++static inline void mtd_part_parser_put(const struct mtd_part_parser *p)
++{
++ module_put(p->owner);
++}
++
++/*
++ * Many partition parsers just expected the core to kfree() all their data in
++ * one chunk. Do that by default.
++ */
++static void mtd_part_parser_cleanup_default(const struct mtd_partition *pparts,
++ int nr_parts)
++{
++ kfree(pparts);
++}
+
+ static struct mtd_part_parser *
+ get_partition_parser_by_type(enum mtd_parser_type type,
+@@ -874,7 +907,7 @@ get_partition_parser_by_type(enum mtd_pa
+
+ p = list_prepare_entry(start, &part_parsers, list);
+ if (start)
+- put_partition_parser(start);
++ mtd_part_parser_put(start);
+
+ list_for_each_entry_continue(p, &part_parsers, list) {
+ if (p->type == type && try_module_get(p->owner)) {
+@@ -888,13 +921,19 @@ get_partition_parser_by_type(enum mtd_pa
+ return ret;
+ }
+
+-void register_mtd_parser(struct mtd_part_parser *p)
+-{
++int __register_mtd_parser(struct mtd_part_parser *p, struct module *owner)
++ {
++ p->owner = owner;
++
++ if (!p->cleanup)
++ p->cleanup = &mtd_part_parser_cleanup_default;
++
+ spin_lock(&part_parser_lock);
+ list_add(&p->list, &part_parsers);
+ spin_unlock(&part_parser_lock);
++ return 0;
+ }
+-EXPORT_SYMBOL_GPL(register_mtd_parser);
++EXPORT_SYMBOL_GPL(__register_mtd_parser);
+
+ void deregister_mtd_parser(struct mtd_part_parser *p)
+ {
+@@ -954,7 +993,7 @@ static const char * const default_mtd_pa
+ * parse_mtd_partitions - parse MTD partitions
+ * @master: the master partition (describes whole MTD device)
+ * @types: names of partition parsers to try or %NULL
+- * @pparts: array of partitions found is returned here
++ * @pparts: info about partitions found is returned here
+ * @data: MTD partition parser-specific data
+ *
+ * This function tries to find partition on MTD device @master. It uses MTD
+@@ -966,45 +1005,42 @@ static const char * const default_mtd_pa
+ *
+ * This function may return:
+ * o a negative error code in case of failure
+- * o zero if no partitions were found
+- * o a positive number of found partitions, in which case on exit @pparts will
+- * point to an array containing this number of &struct mtd_info objects.
++ * o zero otherwise, and @pparts will describe the partitions, number of
++ * partitions, and the parser which parsed them. Caller must release
++ * resources with mtd_part_parser_cleanup() when finished with the returned
++ * data.
+ */
+ int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
+- struct mtd_partition **pparts,
++ struct mtd_partitions *pparts,
+ struct mtd_part_parser_data *data)
+ {
+ struct mtd_part_parser *parser;
+ int ret, err = 0;
+ const char *const *types_of = NULL;
+
+- if (data && data->of_node) {
+- types_of = of_get_probes(data->of_node);
+- if (types_of != NULL)
+- types = types_of;
+- }
+-
+ if (!types)
+ types = default_mtd_part_types;
+
+ for ( ; *types; types++) {
+ pr_debug("%s: parsing partitions %s\n", master->name, *types);
+- parser = get_partition_parser(*types);
++ parser = mtd_part_parser_get(*types);
+ if (!parser && !request_module("%s", *types))
+- parser = get_partition_parser(*types);
++ parser = mtd_part_parser_get(*types);
+ pr_debug("%s: got parser %s\n", master->name,
+ parser ? parser->name : NULL);
+ if (!parser)
+ continue;
+- ret = (*parser->parse_fn)(master, pparts, data);
++ ret = (*parser->parse_fn)(master, &pparts->parts, data);
+ pr_debug("%s: parser %s: %i\n",
+ master->name, parser->name, ret);
+- put_partition_parser(parser);
+ if (ret > 0) {
+ printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
+ ret, parser->name, master->name);
+- return ret;
++ pparts->nr_parts = ret;
++ pparts->parser = parser;
++ return 0;
+ }
++ mtd_part_parser_put(parser);
+ /*
+ * Stash the first error we see; only report it if no parser
+ * succeeds
+@@ -1034,7 +1070,7 @@ int parse_mtd_partitions_by_type(struct
+ ret = (*parser->parse_fn)(master, pparts, data);
+
+ if (ret > 0) {
+- put_partition_parser(parser);
++ mtd_part_parser_put(parser);
+ printk(KERN_NOTICE
+ "%d %s partitions found on MTD device %s\n",
+ ret, parser->name, master->name);
+@@ -1048,6 +1084,22 @@ int parse_mtd_partitions_by_type(struct
+ }
+ EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type);
+
++void mtd_part_parser_cleanup(struct mtd_partitions *parts)
++{
++ const struct mtd_part_parser *parser;
++
++ if (!parts)
++ return;
++
++ parser = parts->parser;
++ if (parser) {
++ if (parser->cleanup)
++ parser->cleanup(parts->parts, parts->nr_parts);
++
++ mtd_part_parser_put(parser);
++ }
++}
++
+ int mtd_is_partition(const struct mtd_info *mtd)
+ {
+ struct mtd_part *part;
+@@ -1070,7 +1122,7 @@ struct mtd_info *mtdpart_get_master(cons
+ if (!mtd_is_partition(mtd))
+ return (struct mtd_info *)mtd;
+
+- return PART(mtd)->master;
++ return mtd_to_part(mtd)->master;
+ }
+ EXPORT_SYMBOL_GPL(mtdpart_get_master);
+
+@@ -1079,7 +1131,7 @@ uint64_t mtdpart_get_offset(const struct
+ if (!mtd_is_partition(mtd))
+ return 0;
+
+- return PART(mtd)->offset;
++ return mtd_to_part(mtd)->offset;
+ }
+ EXPORT_SYMBOL_GPL(mtdpart_get_offset);
+
+@@ -1089,6 +1141,6 @@ uint64_t mtd_get_device_size(const struc
+ if (!mtd_is_partition(mtd))
+ return mtd->size;
+
+- return PART(mtd)->master->size;
++ return mtd_to_part(mtd)->master->size;
+ }
+ EXPORT_SYMBOL_GPL(mtd_get_device_size);
+--- a/drivers/mtd/mtdswap.c
++++ b/drivers/mtd/mtdswap.c
+@@ -346,7 +346,7 @@ static int mtdswap_read_markers(struct m
+ if (mtd_can_have_bb(d->mtd) && mtd_block_isbad(d->mtd, offset))
+ return MTDSWAP_SCANNED_BAD;
+
+- ops.ooblen = 2 * d->mtd->ecclayout->oobavail;
++ ops.ooblen = 2 * d->mtd->oobavail;
+ ops.oobbuf = d->oob_buf;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+@@ -359,7 +359,7 @@ static int mtdswap_read_markers(struct m
+
+ data = (struct mtdswap_oobdata *)d->oob_buf;
+ data2 = (struct mtdswap_oobdata *)
+- (d->oob_buf + d->mtd->ecclayout->oobavail);
++ (d->oob_buf + d->mtd->oobavail);
+
+ if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
+ eb->erase_count = le32_to_cpu(data->count);
+@@ -933,7 +933,7 @@ static unsigned int mtdswap_eblk_passes(
+
+ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = mtd->writesize;
+- ops.ooblen = mtd->ecclayout->oobavail;
++ ops.ooblen = mtd->oobavail;
+ ops.ooboffs = 0;
+ ops.datbuf = d->page_buf;
+ ops.oobbuf = d->oob_buf;
+@@ -945,7 +945,7 @@ static unsigned int mtdswap_eblk_passes(
+ for (i = 0; i < mtd_pages; i++) {
+ patt = mtdswap_test_patt(test + i);
+ memset(d->page_buf, patt, mtd->writesize);
+- memset(d->oob_buf, patt, mtd->ecclayout->oobavail);
++ memset(d->oob_buf, patt, mtd->oobavail);
+ ret = mtd_write_oob(mtd, pos, &ops);
+ if (ret)
+ goto error;
+@@ -964,7 +964,7 @@ static unsigned int mtdswap_eblk_passes(
+ if (p1[j] != patt)
+ goto error;
+
+- for (j = 0; j < mtd->ecclayout->oobavail; j++)
++ for (j = 0; j < mtd->oobavail; j++)
+ if (p2[j] != (unsigned char)patt)
+ goto error;
+
+@@ -1387,7 +1387,7 @@ static int mtdswap_init(struct mtdswap_d
+ if (!d->page_buf)
+ goto page_buf_fail;
+
+- d->oob_buf = kmalloc(2 * mtd->ecclayout->oobavail, GFP_KERNEL);
++ d->oob_buf = kmalloc(2 * mtd->oobavail, GFP_KERNEL);
+ if (!d->oob_buf)
+ goto oob_buf_fail;
+
+@@ -1417,7 +1417,6 @@ static void mtdswap_add_mtd(struct mtd_b
+ unsigned long part;
+ unsigned int eblocks, eavailable, bad_blocks, spare_cnt;
+ uint64_t swap_size, use_size, size_limit;
+- struct nand_ecclayout *oinfo;
+ int ret;
+
+ parts = &partitions[0];
+@@ -1447,17 +1446,10 @@ static void mtdswap_add_mtd(struct mtd_b
+ return;
+ }
+
+- oinfo = mtd->ecclayout;
+- if (!oinfo) {
+- printk(KERN_ERR "%s: mtd%d does not have OOB\n",
+- MTDSWAP_PREFIX, mtd->index);
+- return;
+- }
+-
+- if (!mtd->oobsize || oinfo->oobavail < MTDSWAP_OOBSIZE) {
++ if (!mtd->oobsize || mtd->oobavail < MTDSWAP_OOBSIZE) {
+ printk(KERN_ERR "%s: Not enough free bytes in OOB, "
+ "%d available, %zu needed.\n",
+- MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE);
++ MTDSWAP_PREFIX, mtd->oobavail, MTDSWAP_OOBSIZE);
+ return;
+ }
+
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -55,7 +55,7 @@ config MTD_NAND_DENALI_PCI
+ config MTD_NAND_DENALI_DT
+ tristate "Support Denali NAND controller as a DT device"
+ select MTD_NAND_DENALI
+- depends on HAS_DMA && HAVE_CLK
++ depends on HAS_DMA && HAVE_CLK && OF
+ help
+ Enable the driver for NAND flash on platforms using a Denali NAND
+ controller as a DT device.
+@@ -74,6 +74,7 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR
+ config MTD_NAND_GPIO
+ tristate "GPIO assisted NAND Flash driver"
+ depends on GPIOLIB || COMPILE_TEST
++ depends on HAS_IOMEM
+ help
+ This enables a NAND flash driver where control signals are
+ connected to GPIO pins, and commands and data are communicated
+@@ -310,6 +311,7 @@ config MTD_NAND_CAFE
+ config MTD_NAND_CS553X
+ tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+ depends on X86_32
++ depends on !UML && HAS_IOMEM
+ help
+ The CS553x companion chips for the AMD Geode processor
+ include NAND flash controllers with built-in hardware ECC
+@@ -463,6 +465,7 @@ config MTD_NAND_MPC5121_NFC
+ config MTD_NAND_VF610_NFC
+ tristate "Support for Freescale NFC for VF610/MPC5125"
+ depends on (SOC_VF610 || COMPILE_TEST)
++ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash Controller on some Freescale
+ processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
+@@ -480,7 +483,7 @@ config MTD_NAND_MXC
+
+ config MTD_NAND_SH_FLCTL
+ tristate "Support for NAND on Renesas SuperH FLCTL"
+- depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
++ depends on SUPERH || COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on HAS_DMA
+ help
+@@ -519,6 +522,13 @@ config MTD_NAND_JZ4740
+ help
+ Enables support for NAND Flash on JZ4740 SoC based boards.
+
++config MTD_NAND_JZ4780
++ tristate "Support for NAND on JZ4780 SoC"
++ depends on MACH_JZ4780 && JZ4780_NEMC
++ help
++ Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
++ based boards, using the BCH controller for hardware error correction.
++
+ config MTD_NAND_FSMC
+ tristate "Support for NAND on ST Micros FSMC"
+ depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
+@@ -546,4 +556,11 @@ config MTD_NAND_HISI504
+ help
+ Enables support for NAND controller on Hisilicon SoC Hip04.
+
++config MTD_NAND_QCOM
++ tristate "Support for NAND on QCOM SoCs"
++ depends on ARCH_QCOM
++ help
++ Enables support for NAND flash chips on SoCs containing the EBI2 NAND
++ controller. This controller is found on IPQ806x SoC.
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -49,11 +49,13 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mp
+ obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
+ obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
+ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
++obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
+ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
+ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
+ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
+ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
+ obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
+ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
++obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
+
+ nand-objs := nand_base.o nand_bbt.o nand_timings.o
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -48,50 +48,6 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/of_mtd.h>
+
+-/* Define default oob placement schemes for large and small page devices */
+-static struct nand_ecclayout nand_oob_8 = {
+- .eccbytes = 3,
+- .eccpos = {0, 1, 2},
+- .oobfree = {
+- {.offset = 3,
+- .length = 2},
+- {.offset = 6,
+- .length = 2} }
+-};
+-
+-static struct nand_ecclayout nand_oob_16 = {
+- .eccbytes = 6,
+- .eccpos = {0, 1, 2, 3, 6, 7},
+- .oobfree = {
+- {.offset = 8,
+- . length = 8} }
+-};
+-
+-static struct nand_ecclayout nand_oob_64 = {
+- .eccbytes = 24,
+- .eccpos = {
+- 40, 41, 42, 43, 44, 45, 46, 47,
+- 48, 49, 50, 51, 52, 53, 54, 55,
+- 56, 57, 58, 59, 60, 61, 62, 63},
+- .oobfree = {
+- {.offset = 2,
+- .length = 38} }
+-};
+-
+-static struct nand_ecclayout nand_oob_128 = {
+- .eccbytes = 48,
+- .eccpos = {
+- 80, 81, 82, 83, 84, 85, 86, 87,
+- 88, 89, 90, 91, 92, 93, 94, 95,
+- 96, 97, 98, 99, 100, 101, 102, 103,
+- 104, 105, 106, 107, 108, 109, 110, 111,
+- 112, 113, 114, 115, 116, 117, 118, 119,
+- 120, 121, 122, 123, 124, 125, 126, 127},
+- .oobfree = {
+- {.offset = 2,
+- .length = 78} }
+-};
+-
+ static int nand_get_device(struct mtd_info *mtd, int new_state);
+
+ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+@@ -103,10 +59,96 @@ static int nand_do_write_oob(struct mtd_
+ */
+ DEFINE_LED_TRIGGER(nand_led_trigger);
+
++/* Define default oob placement schemes for large and small page devices */
++static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobregion)
++{
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nand_ecc_ctrl *ecc = &chip->ecc;
++
++ if (section > 1)
++ return -ERANGE;
++
++ if (!section) {
++ oobregion->offset = 0;
++ oobregion->length = 4;
++ } else {
++ oobregion->offset = 6;
++ oobregion->length = ecc->total - 4;
++ }
++
++ return 0;
++}
++
++static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobregion)
++{
++ if (section > 1)
++ return -ERANGE;
++
++ if (mtd->oobsize == 16) {
++ if (section)
++ return -ERANGE;
++
++ oobregion->length = 8;
++ oobregion->offset = 8;
++ } else {
++ oobregion->length = 2;
++ if (!section)
++ oobregion->offset = 3;
++ else
++ oobregion->offset = 6;
++ }
++
++ return 0;
++}
++
++const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
++ .ecc = nand_ooblayout_ecc_sp,
++ .free = nand_ooblayout_free_sp,
++};
++EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
++
++static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobregion)
++{
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nand_ecc_ctrl *ecc = &chip->ecc;
++
++ if (section)
++ return -ERANGE;
++
++ oobregion->length = ecc->total;
++ oobregion->offset = mtd->oobsize - oobregion->length;
++
++ return 0;
++}
++
++static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobregion)
++{
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nand_ecc_ctrl *ecc = &chip->ecc;
++
++ if (section)
++ return -ERANGE;
++
++ oobregion->length = mtd->oobsize - ecc->total - 2;
++ oobregion->offset = 2;
++
++ return 0;
++}
++
++const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
++ .ecc = nand_ooblayout_ecc_lp,
++ .free = nand_ooblayout_free_lp,
++};
++EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
++
+ static int check_offs_len(struct mtd_info *mtd,
+ loff_t ofs, uint64_t len)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ int ret = 0;
+
+ /* Start address must align on block boundary */
+@@ -132,7 +174,7 @@ static int check_offs_len(struct mtd_inf
+ */
+ static void nand_release_device(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ /* Release the controller and the chip */
+ spin_lock(&chip->controller->lock);
+@@ -150,7 +192,7 @@ static void nand_release_device(struct m
+ */
+ static uint8_t nand_read_byte(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ return readb(chip->IO_ADDR_R);
+ }
+
+@@ -163,7 +205,7 @@ static uint8_t nand_read_byte(struct mtd
+ */
+ static uint8_t nand_read_byte16(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R));
+ }
+
+@@ -175,7 +217,7 @@ static uint8_t nand_read_byte16(struct m
+ */
+ static u16 nand_read_word(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ return readw(chip->IO_ADDR_R);
+ }
+
+@@ -188,7 +230,7 @@ static u16 nand_read_word(struct mtd_inf
+ */
+ static void nand_select_chip(struct mtd_info *mtd, int chipnr)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ switch (chipnr) {
+ case -1:
+@@ -211,7 +253,7 @@ static void nand_select_chip(struct mtd_
+ */
+ static void nand_write_byte(struct mtd_info *mtd, uint8_t byte)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ chip->write_buf(mtd, &byte, 1);
+ }
+@@ -225,7 +267,7 @@ static void nand_write_byte(struct mtd_i
+ */
+ static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ uint16_t word = byte;
+
+ /*
+@@ -257,7 +299,7 @@ static void nand_write_byte16(struct mtd
+ */
+ static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ iowrite8_rep(chip->IO_ADDR_W, buf, len);
+ }
+@@ -272,7 +314,7 @@ static void nand_write_buf(struct mtd_in
+ */
+ static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ ioread8_rep(chip->IO_ADDR_R, buf, len);
+ }
+@@ -287,7 +329,7 @@ static void nand_read_buf(struct mtd_inf
+ */
+ static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ u16 *p = (u16 *) buf;
+
+ iowrite16_rep(chip->IO_ADDR_W, p, len >> 1);
+@@ -303,7 +345,7 @@ static void nand_write_buf16(struct mtd_
+ */
+ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ u16 *p = (u16 *) buf;
+
+ ioread16_rep(chip->IO_ADDR_R, p, len >> 1);
+@@ -313,14 +355,13 @@ static void nand_read_buf16(struct mtd_i
+ * nand_block_bad - [DEFAULT] Read bad block marker from the chip
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+- * @getchip: 0, if the chip is already selected
+ *
+ * Check, if the block is bad.
+ */
+-static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
++static int nand_block_bad(struct mtd_info *mtd, loff_t ofs)
+ {
+- int page, chipnr, res = 0, i = 0;
+- struct nand_chip *chip = mtd->priv;
++ int page, res = 0, i = 0;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ u16 bad;
+
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+@@ -328,15 +369,6 @@ static int nand_block_bad(struct mtd_inf
+
+ page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+
+- if (getchip) {
+- chipnr = (int)(ofs >> chip->chip_shift);
+-
+- nand_get_device(mtd, FL_READING);
+-
+- /* Select the NAND device */
+- chip->select_chip(mtd, chipnr);
+- }
+-
+ do {
+ if (chip->options & NAND_BUSWIDTH_16) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB,
+@@ -361,11 +393,6 @@ static int nand_block_bad(struct mtd_inf
+ i++;
+ } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
+
+- if (getchip) {
+- chip->select_chip(mtd, -1);
+- nand_release_device(mtd);
+- }
+-
+ return res;
+ }
+
+@@ -380,7 +407,7 @@ static int nand_block_bad(struct mtd_inf
+ */
+ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct mtd_oob_ops ops;
+ uint8_t buf[2] = { 0, 0 };
+ int ret = 0, res, i = 0;
+@@ -430,7 +457,7 @@ static int nand_default_block_markbad(st
+ */
+ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ int res, ret = 0;
+
+ if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) {
+@@ -471,7 +498,7 @@ static int nand_block_markbad_lowlevel(s
+ */
+ static int nand_check_wp(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ /* Broken xD cards report WP despite being writable */
+ if (chip->options & NAND_BROKEN_XD)
+@@ -491,7 +518,7 @@ static int nand_check_wp(struct mtd_info
+ */
+ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (!chip->bbt)
+ return 0;
+@@ -503,19 +530,17 @@ static int nand_block_isreserved(struct
+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+- * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
+ *
+ * Check, if the block is bad. Either by reading the bad block table or
+ * calling of the scan function.
+ */
+-static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
+- int allowbbt)
++static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (!chip->bbt)
+- return chip->block_bad(mtd, ofs, getchip);
++ return chip->block_bad(mtd, ofs);
+
+ /* Return info from the table */
+ return nand_isbad_bbt(mtd, ofs, allowbbt);
+@@ -531,7 +556,7 @@ static int nand_block_checkbad(struct mt
+ */
+ static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ int i;
+
+ /* Wait for the device to get ready */
+@@ -551,7 +576,7 @@ static void panic_nand_wait_ready(struct
+ */
+ void nand_wait_ready(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ unsigned long timeo = 400;
+
+ if (in_interrupt() || oops_in_progress)
+@@ -566,8 +591,8 @@ void nand_wait_ready(struct mtd_info *mt
+ cond_resched();
+ } while (time_before(jiffies, timeo));
+
+- pr_warn_ratelimited(
+- "timeout while waiting for chip to become ready\n");
++ if (!chip->dev_ready(mtd))
++ pr_warn_ratelimited("timeout while waiting for chip to become ready\n");
+ out:
+ led_trigger_event(nand_led_trigger, LED_OFF);
+ }
+@@ -582,7 +607,7 @@ EXPORT_SYMBOL_GPL(nand_wait_ready);
+ */
+ static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
+ {
+- register struct nand_chip *chip = mtd->priv;
++ register struct nand_chip *chip = mtd_to_nand(mtd);
+
+ timeo = jiffies + msecs_to_jiffies(timeo);
+ do {
+@@ -605,7 +630,7 @@ static void nand_wait_status_ready(struc
+ static void nand_command(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+ {
+- register struct nand_chip *chip = mtd->priv;
++ register struct nand_chip *chip = mtd_to_nand(mtd);
+ int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
+
+ /* Write out the command to the device */
+@@ -708,7 +733,7 @@ static void nand_command(struct mtd_info
+ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+ {
+- register struct nand_chip *chip = mtd->priv;
++ register struct nand_chip *chip = mtd_to_nand(mtd);
+
+ /* Emulate NAND_CMD_READOOB */
+ if (command == NAND_CMD_READOOB) {
+@@ -832,7 +857,7 @@ static void panic_nand_get_device(struct
+ static int
+ nand_get_device(struct mtd_info *mtd, int new_state)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ spinlock_t *lock = &chip->controller->lock;
+ wait_queue_head_t *wq = &chip->controller->wq;
+ DECLARE_WAITQUEUE(wait, current);
+@@ -952,7 +977,7 @@ static int __nand_unlock(struct mtd_info
+ {
+ int ret = 0;
+ int status, page;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ /* Submit address of first page to unlock */
+ page = ofs >> chip->page_shift;
+@@ -987,7 +1012,7 @@ int nand_unlock(struct mtd_info *mtd, lo
+ {
+ int ret = 0;
+ int chipnr;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)ofs, len);
+@@ -1050,7 +1075,7 @@ int nand_lock(struct mtd_info *mtd, loff
+ {
+ int ret = 0;
+ int chipnr, status, page;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)ofs, len);
+@@ -1309,13 +1334,12 @@ static int nand_read_page_raw_syndrome(s
+ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+ {
+- int i, eccsize = chip->ecc.size;
++ int i, eccsize = chip->ecc.size, ret;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+- uint32_t *eccpos = chip->ecc.layout->eccpos;
+ unsigned int max_bitflips = 0;
+
+ chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
+@@ -1323,8 +1347,10 @@ static int nand_read_page_swecc(struct m
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+- for (i = 0; i < chip->ecc.total; i++)
+- ecc_code[i] = chip->oob_poi[eccpos[i]];
++ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
++ chip->ecc.total);
++ if (ret)
++ return ret;
+
+ eccsteps = chip->ecc.steps;
+ p = buf;
+@@ -1356,14 +1382,14 @@ static int nand_read_subpage(struct mtd_
+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
+ int page)
+ {
+- int start_step, end_step, num_steps;
+- uint32_t *eccpos = chip->ecc.layout->eccpos;
++ int start_step, end_step, num_steps, ret;
+ uint8_t *p;
+ int data_col_addr, i, gaps = 0;
+ int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+ int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+- int index;
++ int index, section = 0;
+ unsigned int max_bitflips = 0;
++ struct mtd_oob_region oobregion = { };
+
+ /* Column address within the page aligned to ECC size (256bytes) */
+ start_step = data_offs / chip->ecc.size;
+@@ -1391,12 +1417,13 @@ static int nand_read_subpage(struct mtd_
+ * The performance is faster if we position offsets according to
+ * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+ */
+- for (i = 0; i < eccfrag_len - 1; i++) {
+- if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
+- gaps = 1;
+- break;
+- }
+- }
++ ret = mtd_ooblayout_find_eccregion(mtd, index, &section, &oobregion);
++ if (ret)
++ return ret;
++
++ if (oobregion.length < eccfrag_len)
++ gaps = 1;
++
+ if (gaps) {
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+@@ -1405,20 +1432,23 @@ static int nand_read_subpage(struct mtd_
+ * Send the command to read the particular ECC bytes take care
+ * about buswidth alignment in read_buf.
+ */
+- aligned_pos = eccpos[index] & ~(busw - 1);
++ aligned_pos = oobregion.offset & ~(busw - 1);
+ aligned_len = eccfrag_len;
+- if (eccpos[index] & (busw - 1))
++ if (oobregion.offset & (busw - 1))
+ aligned_len++;
+- if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
++ if ((oobregion.offset + (num_steps * chip->ecc.bytes)) &
++ (busw - 1))
+ aligned_len++;
+
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+- mtd->writesize + aligned_pos, -1);
++ mtd->writesize + aligned_pos, -1);
+ chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+ }
+
+- for (i = 0; i < eccfrag_len; i++)
+- chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
++ ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode,
++ chip->oob_poi, index, eccfrag_len);
++ if (ret)
++ return ret;
+
+ p = bufpoi + data_col_addr;
+ for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+@@ -1426,6 +1456,16 @@ static int nand_read_subpage(struct mtd_
+
+ stat = chip->ecc.correct(mtd, p,
+ &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
++ if (stat == -EBADMSG &&
++ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
++ /* check for empty pages with bitflips */
++ stat = nand_check_erased_ecc_chunk(p, chip->ecc.size,
++ &chip->buffers->ecccode[i],
++ chip->ecc.bytes,
++ NULL, 0,
++ chip->ecc.strength);
++ }
++
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+@@ -1449,13 +1489,12 @@ static int nand_read_subpage(struct mtd_
+ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+ {
+- int i, eccsize = chip->ecc.size;
++ int i, eccsize = chip->ecc.size, ret;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+- uint32_t *eccpos = chip->ecc.layout->eccpos;
+ unsigned int max_bitflips = 0;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+@@ -1465,8 +1504,10 @@ static int nand_read_page_hwecc(struct m
+ }
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+- for (i = 0; i < chip->ecc.total; i++)
+- ecc_code[i] = chip->oob_poi[eccpos[i]];
++ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
++ chip->ecc.total);
++ if (ret)
++ return ret;
+
+ eccsteps = chip->ecc.steps;
+ p = buf;
+@@ -1475,6 +1516,15 @@ static int nand_read_page_hwecc(struct m
+ int stat;
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
++ if (stat == -EBADMSG &&
++ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
++ /* check for empty pages with bitflips */
++ stat = nand_check_erased_ecc_chunk(p, eccsize,
++ &ecc_code[i], eccbytes,
++ NULL, 0,
++ chip->ecc.strength);
++ }
++
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+@@ -1502,12 +1552,11 @@ static int nand_read_page_hwecc(struct m
+ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
+ {
+- int i, eccsize = chip->ecc.size;
++ int i, eccsize = chip->ecc.size, ret;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+- uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ unsigned int max_bitflips = 0;
+
+@@ -1516,8 +1565,10 @@ static int nand_read_page_hwecc_oob_firs
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+- for (i = 0; i < chip->ecc.total; i++)
+- ecc_code[i] = chip->oob_poi[eccpos[i]];
++ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
++ chip->ecc.total);
++ if (ret)
++ return ret;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+@@ -1527,6 +1578,15 @@ static int nand_read_page_hwecc_oob_firs
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
++ if (stat == -EBADMSG &&
++ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
++ /* check for empty pages with bitflips */
++ stat = nand_check_erased_ecc_chunk(p, eccsize,
++ &ecc_code[i], eccbytes,
++ NULL, 0,
++ chip->ecc.strength);
++ }
++
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+@@ -1554,6 +1614,7 @@ static int nand_read_page_syndrome(struc
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
++ int eccpadbytes = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+ uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+ unsigned int max_bitflips = 0;
+@@ -1573,19 +1634,29 @@ static int nand_read_page_syndrome(struc
+ chip->read_buf(mtd, oob, eccbytes);
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+- if (stat < 0) {
+- mtd->ecc_stats.failed++;
+- } else {
+- mtd->ecc_stats.corrected += stat;
+- max_bitflips = max_t(unsigned int, max_bitflips, stat);
+- }
+-
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
++
++ if (stat == -EBADMSG &&
++ (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
++ /* check for empty pages with bitflips */
++ stat = nand_check_erased_ecc_chunk(p, chip->ecc.size,
++ oob - eccpadbytes,
++ eccpadbytes,
++ NULL, 0,
++ chip->ecc.strength);
++ }
++
++ if (stat < 0) {
++ mtd->ecc_stats.failed++;
++ } else {
++ mtd->ecc_stats.corrected += stat;
++ max_bitflips = max_t(unsigned int, max_bitflips, stat);
++ }
+ }
+
+ /* Calculate remaining oob bytes */
+@@ -1598,14 +1669,17 @@ static int nand_read_page_syndrome(struc
+
+ /**
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+- * @chip: nand chip structure
++ * @mtd: mtd info structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
+ */
+-static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
++static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob,
+ struct mtd_oob_ops *ops, size_t len)
+ {
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ int ret;
++
+ switch (ops->mode) {
+
+ case MTD_OPS_PLACE_OOB:
+@@ -1613,31 +1687,12 @@ static uint8_t *nand_transfer_oob(struct
+ memcpy(oob, chip->oob_poi + ops->ooboffs, len);
+ return oob + len;
+
+- case MTD_OPS_AUTO_OOB: {
+- struct nand_oobfree *free = chip->ecc.layout->oobfree;
+- uint32_t boffs = 0, roffs = ops->ooboffs;
+- size_t bytes = 0;
+-
+- for (; free->length && len; free++, len -= bytes) {
+- /* Read request not from offset 0? */
+- if (unlikely(roffs)) {
+- if (roffs >= free->length) {
+- roffs -= free->length;
+- continue;
+- }
+- boffs = free->offset + roffs;
+- bytes = min_t(size_t, len,
+- (free->length - roffs));
+- roffs = 0;
+- } else {
+- bytes = min_t(size_t, len, free->length);
+- boffs = free->offset;
+- }
+- memcpy(oob, chip->oob_poi + boffs, bytes);
+- oob += bytes;
+- }
+- return oob;
+- }
++ case MTD_OPS_AUTO_OOB:
++ ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oob_poi,
++ ops->ooboffs, len);
++ BUG_ON(ret);
++ return oob + len;
++
+ default:
+ BUG();
+ }
+@@ -1655,7 +1710,7 @@ static uint8_t *nand_transfer_oob(struct
+ */
+ static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ pr_debug("setting READ RETRY mode %d\n", retry_mode);
+
+@@ -1680,12 +1735,11 @@ static int nand_do_read_ops(struct mtd_i
+ struct mtd_oob_ops *ops)
+ {
+ int chipnr, page, realpage, col, bytes, aligned, oob_required;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ int ret = 0;
+ uint32_t readlen = ops->len;
+ uint32_t oobreadlen = ops->ooblen;
+- uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
+- mtd->oobavail : mtd->oobsize;
++ uint32_t max_oobsize = mtd_oobavail(mtd, ops);
+
+ uint8_t *bufpoi, *oob, *buf;
+ int use_bufpoi;
+@@ -1772,7 +1826,7 @@ read_retry:
+ int toread = min(oobreadlen, max_oobsize);
+
+ if (toread) {
+- oob = nand_transfer_oob(chip,
++ oob = nand_transfer_oob(mtd,
+ oob, ops, toread);
+ oobreadlen -= toread;
+ }
+@@ -2024,7 +2078,7 @@ static int nand_do_read_oob(struct mtd_i
+ struct mtd_oob_ops *ops)
+ {
+ int page, realpage, chipnr;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct mtd_ecc_stats stats;
+ int readlen = ops->ooblen;
+ int len;
+@@ -2036,10 +2090,7 @@ static int nand_do_read_oob(struct mtd_i
+
+ stats = mtd->ecc_stats;
+
+- if (ops->mode == MTD_OPS_AUTO_OOB)
+- len = chip->ecc.layout->oobavail;
+- else
+- len = mtd->oobsize;
++ len = mtd_oobavail(mtd, ops);
+
+ if (unlikely(ops->ooboffs >= len)) {
+ pr_debug("%s: attempt to start read outside oob\n",
+@@ -2073,7 +2124,7 @@ static int nand_do_read_oob(struct mtd_i
+ break;
+
+ len = min(len, readlen);
+- buf = nand_transfer_oob(chip, buf, ops, len);
++ buf = nand_transfer_oob(mtd, buf, ops, len);
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+@@ -2232,19 +2283,20 @@ static int nand_write_page_swecc(struct
+ const uint8_t *buf, int oob_required,
+ int page)
+ {
+- int i, eccsize = chip->ecc.size;
++ int i, eccsize = chip->ecc.size, ret;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ const uint8_t *p = buf;
+- uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+ /* Software ECC calculation */
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+- for (i = 0; i < chip->ecc.total; i++)
+- chip->oob_poi[eccpos[i]] = ecc_calc[i];
++ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
++ chip->ecc.total);
++ if (ret)
++ return ret;
+
+ return chip->ecc.write_page_raw(mtd, chip, buf, 1, page);
+ }
+@@ -2261,12 +2313,11 @@ static int nand_write_page_hwecc(struct
+ const uint8_t *buf, int oob_required,
+ int page)
+ {
+- int i, eccsize = chip->ecc.size;
++ int i, eccsize = chip->ecc.size, ret;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ const uint8_t *p = buf;
+- uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+@@ -2274,8 +2325,10 @@ static int nand_write_page_hwecc(struct
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+ }
+
+- for (i = 0; i < chip->ecc.total; i++)
+- chip->oob_poi[eccpos[i]] = ecc_calc[i];
++ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
++ chip->ecc.total);
++ if (ret)
++ return ret;
+
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+@@ -2303,11 +2356,10 @@ static int nand_write_subpage_hwecc(stru
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ int ecc_steps = chip->ecc.steps;
+- uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint32_t start_step = offset / ecc_size;
+ uint32_t end_step = (offset + data_len - 1) / ecc_size;
+ int oob_bytes = mtd->oobsize / ecc_steps;
+- int step, i;
++ int step, ret;
+
+ for (step = 0; step < ecc_steps; step++) {
+ /* configure controller for WRITE access */
+@@ -2335,8 +2387,10 @@ static int nand_write_subpage_hwecc(stru
+ /* copy calculated ECC for whole page to chip->buffer->oob */
+ /* this include masked-value(0xFF) for unwritten subpages */
+ ecc_calc = chip->buffers->ecccalc;
+- for (i = 0; i < chip->ecc.total; i++)
+- chip->oob_poi[eccpos[i]] = ecc_calc[i];
++ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
++ chip->ecc.total);
++ if (ret)
++ return ret;
+
+ /* write OOB buffer to NAND device */
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+@@ -2472,7 +2526,8 @@ static int nand_write_page(struct mtd_in
+ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ int ret;
+
+ /*
+ * Initialise to all 0xFF, to avoid the possibility of left over OOB
+@@ -2487,31 +2542,12 @@ static uint8_t *nand_fill_oob(struct mtd
+ memcpy(chip->oob_poi + ops->ooboffs, oob, len);
+ return oob + len;
+
+- case MTD_OPS_AUTO_OOB: {
+- struct nand_oobfree *free = chip->ecc.layout->oobfree;
+- uint32_t boffs = 0, woffs = ops->ooboffs;
+- size_t bytes = 0;
+-
+- for (; free->length && len; free++, len -= bytes) {
+- /* Write request not from offset 0? */
+- if (unlikely(woffs)) {
+- if (woffs >= free->length) {
+- woffs -= free->length;
+- continue;
+- }
+- boffs = free->offset + woffs;
+- bytes = min_t(size_t, len,
+- (free->length - woffs));
+- woffs = 0;
+- } else {
+- bytes = min_t(size_t, len, free->length);
+- boffs = free->offset;
+- }
+- memcpy(chip->oob_poi + boffs, oob, bytes);
+- oob += bytes;
+- }
+- return oob;
+- }
++ case MTD_OPS_AUTO_OOB:
++ ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oob_poi,
++ ops->ooboffs, len);
++ BUG_ON(ret);
++ return oob + len;
++
+ default:
+ BUG();
+ }
+@@ -2532,12 +2568,11 @@ static int nand_do_write_ops(struct mtd_
+ struct mtd_oob_ops *ops)
+ {
+ int chipnr, realpage, page, blockmask, column;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ uint32_t writelen = ops->len;
+
+ uint32_t oobwritelen = ops->ooblen;
+- uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
+- mtd->oobavail : mtd->oobsize;
++ uint32_t oobmaxlen = mtd_oobavail(mtd, ops);
+
+ uint8_t *oob = ops->oobbuf;
+ uint8_t *buf = ops->datbuf;
+@@ -2662,7 +2697,7 @@ err_out:
+ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const uint8_t *buf)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct mtd_oob_ops ops;
+ int ret;
+
+@@ -2722,15 +2757,12 @@ static int nand_do_write_oob(struct mtd_
+ struct mtd_oob_ops *ops)
+ {
+ int chipnr, page, status, len;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ pr_debug("%s: to = 0x%08x, len = %i\n",
+ __func__, (unsigned int)to, (int)ops->ooblen);
+
+- if (ops->mode == MTD_OPS_AUTO_OOB)
+- len = chip->ecc.layout->oobavail;
+- else
+- len = mtd->oobsize;
++ len = mtd_oobavail(mtd, ops);
+
+ /* Do not allow write past end of page */
+ if ((ops->ooboffs + ops->ooblen) > len) {
+@@ -2847,7 +2879,7 @@ out:
+ */
+ static int single_erase(struct mtd_info *mtd, int page)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ /* Send commands to erase a block */
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+@@ -2879,7 +2911,7 @@ int nand_erase_nand(struct mtd_info *mtd
+ int allowbbt)
+ {
+ int page, status, pages_per_block, ret, chipnr;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ loff_t len;
+
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+@@ -2918,7 +2950,7 @@ int nand_erase_nand(struct mtd_info *mtd
+ while (len) {
+ /* Check if we have a bad block, we do not erase bad blocks! */
+ if (nand_block_checkbad(mtd, ((loff_t) page) <<
+- chip->page_shift, 0, allowbbt)) {
++ chip->page_shift, allowbbt)) {
+ pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+ __func__, page);
+ instr->state = MTD_ERASE_FAILED;
+@@ -3005,7 +3037,20 @@ static void nand_sync(struct mtd_info *m
+ */
+ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
+ {
+- return nand_block_checkbad(mtd, offs, 1, 0);
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ int chipnr = (int)(offs >> chip->chip_shift);
++ int ret;
++
++ /* Select the NAND device */
++ nand_get_device(mtd, FL_READING);
++ chip->select_chip(mtd, chipnr);
++
++ ret = nand_block_checkbad(mtd, offs, 0);
++
++ chip->select_chip(mtd, -1);
++ nand_release_device(mtd);
++
++ return ret;
+ }
+
+ /**
+@@ -3094,7 +3139,7 @@ static int nand_suspend(struct mtd_info
+ */
+ static void nand_resume(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (chip->state == FL_PM_SUSPENDED)
+ nand_release_device(mtd);
+@@ -3266,7 +3311,7 @@ ext_out:
+
+ static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
+
+ return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
+@@ -3937,10 +3982,13 @@ ident_done:
+ return type;
+ }
+
+-static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip,
+- struct device_node *dn)
++static int nand_dt_init(struct nand_chip *chip)
+ {
+- int ecc_mode, ecc_strength, ecc_step;
++ struct device_node *dn = nand_get_flash_node(chip);
++ int ecc_mode, ecc_algo, ecc_strength, ecc_step;
++
++ if (!dn)
++ return 0;
+
+ if (of_get_nand_bus_width(dn) == 16)
+ chip->options |= NAND_BUSWIDTH_16;
+@@ -3949,6 +3997,7 @@ static int nand_dt_init(struct mtd_info
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+ ecc_mode = of_get_nand_ecc_mode(dn);
++ ecc_algo = of_get_nand_ecc_algo(dn);
+ ecc_strength = of_get_nand_ecc_strength(dn);
+ ecc_step = of_get_nand_ecc_step_size(dn);
+
+@@ -3961,6 +4010,9 @@ static int nand_dt_init(struct mtd_info
+ if (ecc_mode >= 0)
+ chip->ecc.mode = ecc_mode;
+
++ if (ecc_algo >= 0)
++ chip->ecc.algo = ecc_algo;
++
+ if (ecc_strength >= 0)
+ chip->ecc.strength = ecc_strength;
+
+@@ -3984,15 +4036,16 @@ int nand_scan_ident(struct mtd_info *mtd
+ struct nand_flash_dev *table)
+ {
+ int i, nand_maf_id, nand_dev_id;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_flash_dev *type;
+ int ret;
+
+- if (chip->flash_node) {
+- ret = nand_dt_init(mtd, chip, chip->flash_node);
+- if (ret)
+- return ret;
+- }
++ ret = nand_dt_init(chip);
++ if (ret)
++ return ret;
++
++ if (!mtd->name && mtd->dev.parent)
++ mtd->name = dev_name(mtd->dev.parent);
+
+ if (!mtd->name && mtd->dev.parent)
+ mtd->name = dev_name(mtd->dev.parent);
+@@ -4055,7 +4108,7 @@ EXPORT_SYMBOL(nand_scan_ident);
+ */
+ static bool nand_ecc_strength_good(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int corr, ds_corr;
+
+@@ -4083,10 +4136,10 @@ static bool nand_ecc_strength_good(struc
+ */
+ int nand_scan_tail(struct mtd_info *mtd)
+ {
+- int i;
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct nand_buffers *nbuf;
++ int ret;
+
+ /* New bad blocks should be marked in OOB, flash-based BBT, or both */
+ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+@@ -4113,19 +4166,15 @@ int nand_scan_tail(struct mtd_info *mtd)
+ /*
+ * If no default placement scheme is given, select an appropriate one.
+ */
+- if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
++ if (!mtd->ooblayout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
+ switch (mtd->oobsize) {
+ case 8:
+- ecc->layout = &nand_oob_8;
+- break;
+ case 16:
+- ecc->layout = &nand_oob_16;
++ mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
+ break;
+ case 64:
+- ecc->layout = &nand_oob_64;
+- break;
+ case 128:
+- ecc->layout = &nand_oob_128;
++ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ break;
+ default:
+ pr_warn("No oob scheme defined for oobsize %d\n",
+@@ -4168,7 +4217,7 @@ int nand_scan_tail(struct mtd_info *mtd)
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->read_subpage)
+ ecc->read_subpage = nand_read_subpage;
+- if (!ecc->write_subpage)
++ if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
+ ecc->write_subpage = nand_write_subpage_hwecc;
+
+ case NAND_ECC_HW_SYNDROME:
+@@ -4246,10 +4295,8 @@ int nand_scan_tail(struct mtd_info *mtd)
+ }
+
+ /* See nand_bch_init() for details. */
+- ecc->bytes = DIV_ROUND_UP(
+- ecc->strength * fls(8 * ecc->size), 8);
+- ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
+- &ecc->layout);
++ ecc->bytes = 0;
++ ecc->priv = nand_bch_init(mtd);
+ if (!ecc->priv) {
+ pr_warn("BCH ECC initialization failed!\n");
+ BUG();
+@@ -4280,20 +4327,9 @@ int nand_scan_tail(struct mtd_info *mtd)
+ if (!ecc->write_oob_raw)
+ ecc->write_oob_raw = ecc->write_oob;
+
+- /*
+- * The number of bytes available for a client to place data into
+- * the out of band area.
+- */
+- ecc->layout->oobavail = 0;
+- for (i = 0; ecc->layout->oobfree[i].length
+- && i < ARRAY_SIZE(ecc->layout->oobfree); i++)
+- ecc->layout->oobavail += ecc->layout->oobfree[i].length;
+- mtd->oobavail = ecc->layout->oobavail;
+-
+- /* ECC sanity check: warn if it's too weak */
+- if (!nand_ecc_strength_good(mtd))
+- pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+- mtd->name);
++ /* propagate ecc info to mtd_info */
++ mtd->ecc_strength = ecc->strength;
++ mtd->ecc_step_size = ecc->size;
+
+ /*
+ * Set the number of read / write steps for one page depending on ECC
+@@ -4306,6 +4342,21 @@ int nand_scan_tail(struct mtd_info *mtd)
+ }
+ ecc->total = ecc->steps * ecc->bytes;
+
++ /*
++ * The number of bytes available for a client to place data into
++ * the out of band area.
++ */
++ ret = mtd_ooblayout_count_freebytes(mtd);
++ if (ret < 0)
++ ret = 0;
++
++ mtd->oobavail = ret;
++
++ /* ECC sanity check: warn if it's too weak */
++ if (!nand_ecc_strength_good(mtd))
++ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
++ mtd->name);
++
+ /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
+ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
+ switch (ecc->steps) {
+@@ -4362,10 +4413,6 @@ int nand_scan_tail(struct mtd_info *mtd)
+ mtd->_block_markbad = nand_block_markbad;
+ mtd->writebufsize = mtd->writesize;
+
+- /* propagate ecc info to mtd_info */
+- mtd->ecclayout = ecc->layout;
+- mtd->ecc_strength = ecc->strength;
+- mtd->ecc_step_size = ecc->size;
+ /*
+ * Initialize bitflip_threshold to its default prior scan_bbt() call.
+ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+@@ -4421,7 +4468,7 @@ EXPORT_SYMBOL(nand_scan);
+ */
+ void nand_release(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
+ nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
+--- a/drivers/mtd/nand/nand_bbt.c
++++ b/drivers/mtd/nand/nand_bbt.c
+@@ -172,7 +172,7 @@ static int read_bbt(struct mtd_info *mtd
+ struct nand_bbt_descr *td, int offs)
+ {
+ int res, ret = 0, i, j, act = 0;
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ size_t retlen, len, totlen;
+ loff_t from;
+ int bits = td->options & NAND_BBT_NRBITS_MSK;
+@@ -263,7 +263,7 @@ static int read_bbt(struct mtd_info *mtd
+ */
+ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int res = 0, i;
+
+ if (td->options & NAND_BBT_PERCHIP) {
+@@ -388,7 +388,7 @@ static u32 bbt_get_ver_offs(struct mtd_i
+ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+
+ /* Read the primary version, if available */
+ if (td->options & NAND_BBT_VERSION) {
+@@ -454,7 +454,7 @@ static int scan_block_fast(struct mtd_in
+ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *bd, int chip)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int i, numblocks, numpages;
+ int startblock;
+ loff_t from;
+@@ -523,7 +523,7 @@ static int create_bbt(struct mtd_info *m
+ */
+ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int i, chips;
+ int startblock, block, dir;
+ int scanlen = mtd->writesize + mtd->oobsize;
+@@ -618,7 +618,7 @@ static int write_bbt(struct mtd_info *mt
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md,
+ int chipsel)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ struct erase_info einfo;
+ int i, res, chip = 0;
+ int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
+@@ -819,7 +819,7 @@ static int write_bbt(struct mtd_info *mt
+ */
+ static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+
+ return create_bbt(mtd, this->buffers->databuf, bd, -1);
+ }
+@@ -838,7 +838,7 @@ static inline int nand_memory_bbt(struct
+ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
+ {
+ int i, chips, writeops, create, chipsel, res, res2;
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ struct nand_bbt_descr *td = this->bbt_td;
+ struct nand_bbt_descr *md = this->bbt_md;
+ struct nand_bbt_descr *rd, *rd2;
+@@ -962,7 +962,7 @@ static int check_create(struct mtd_info
+ */
+ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int i, j, chips, block, nrblocks, update;
+ uint8_t oldval;
+
+@@ -1022,7 +1022,7 @@ static void mark_bbt_region(struct mtd_i
+ */
+ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ u32 pattern_len;
+ u32 bits;
+ u32 table_size;
+@@ -1074,7 +1074,7 @@ static void verify_bbt_descr(struct mtd_
+ */
+ static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int len, res;
+ uint8_t *buf;
+ struct nand_bbt_descr *td = this->bbt_td;
+@@ -1147,7 +1147,7 @@ err:
+ */
+ static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int len, res = 0;
+ int chip, chipsel;
+ uint8_t *buf;
+@@ -1281,7 +1281,7 @@ static int nand_create_badblock_pattern(
+ */
+ int nand_default_bbt(struct mtd_info *mtd)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int ret;
+
+ /* Is a flash based bad block table requested? */
+@@ -1317,7 +1317,7 @@ int nand_default_bbt(struct mtd_info *mt
+ */
+ int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int block;
+
+ block = (int)(offs >> this->bbt_erase_shift);
+@@ -1332,7 +1332,7 @@ int nand_isreserved_bbt(struct mtd_info
+ */
+ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int block, res;
+
+ block = (int)(offs >> this->bbt_erase_shift);
+@@ -1359,7 +1359,7 @@ int nand_isbad_bbt(struct mtd_info *mtd,
+ */
+ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
+ {
+- struct nand_chip *this = mtd->priv;
++ struct nand_chip *this = mtd_to_nand(mtd);
+ int block, ret = 0;
+
+ block = (int)(offs >> this->bbt_erase_shift);
+@@ -1373,5 +1373,3 @@ int nand_markbad_bbt(struct mtd_info *mt
+
+ return ret;
+ }
+-
+-EXPORT_SYMBOL(nand_scan_bbt);
+--- a/drivers/mtd/nand/nand_bch.c
++++ b/drivers/mtd/nand/nand_bch.c
+@@ -32,13 +32,11 @@
+ /**
+ * struct nand_bch_control - private NAND BCH control structure
+ * @bch: BCH control structure
+- * @ecclayout: private ecc layout for this BCH configuration
+ * @errloc: error location array
+ * @eccmask: XOR ecc mask, allows erased pages to be decoded as valid
+ */
+ struct nand_bch_control {
+ struct bch_control *bch;
+- struct nand_ecclayout ecclayout;
+ unsigned int *errloc;
+ unsigned char *eccmask;
+ };
+@@ -52,7 +50,7 @@ struct nand_bch_control {
+ int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+ unsigned char *code)
+ {
+- const struct nand_chip *chip = mtd->priv;
++ const struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_bch_control *nbc = chip->ecc.priv;
+ unsigned int i;
+
+@@ -79,7 +77,7 @@ EXPORT_SYMBOL(nand_bch_calculate_ecc);
+ int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+ {
+- const struct nand_chip *chip = mtd->priv;
++ const struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_bch_control *nbc = chip->ecc.priv;
+ unsigned int *errloc = nbc->errloc;
+ int i, count;
+@@ -98,7 +96,7 @@ int nand_bch_correct_data(struct mtd_inf
+ }
+ } else if (count < 0) {
+ printk(KERN_ERR "ecc unrecoverable error\n");
+- count = -1;
++ count = -EBADMSG;
+ }
+ return count;
+ }
+@@ -107,9 +105,6 @@ EXPORT_SYMBOL(nand_bch_correct_data);
+ /**
+ * nand_bch_init - [NAND Interface] Initialize NAND BCH error correction
+ * @mtd: MTD block structure
+- * @eccsize: ecc block size in bytes
+- * @eccbytes: ecc length in bytes
+- * @ecclayout: output default layout
+ *
+ * Returns:
+ * a pointer to a new NAND BCH control structure, or NULL upon failure
+@@ -123,14 +118,20 @@ EXPORT_SYMBOL(nand_bch_correct_data);
+ * @eccsize = 512 (thus, m=13 is the smallest integer such that 2^m-1 > 512*8)
+ * @eccbytes = 7 (7 bytes are required to store m*t = 13*4 = 52 bits)
+ */
+-struct nand_bch_control *
+-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
+- struct nand_ecclayout **ecclayout)
++struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
+ {
++ struct nand_chip *nand = mtd_to_nand(mtd);
+ unsigned int m, t, eccsteps, i;
+- struct nand_ecclayout *layout;
+ struct nand_bch_control *nbc = NULL;
+ unsigned char *erased_page;
++ unsigned int eccsize = nand->ecc.size;
++ unsigned int eccbytes = nand->ecc.bytes;
++ unsigned int eccstrength = nand->ecc.strength;
++
++ if (!eccbytes && eccstrength) {
++ eccbytes = DIV_ROUND_UP(eccstrength * fls(8 * eccsize), 8);
++ nand->ecc.bytes = eccbytes;
++ }
+
+ if (!eccsize || !eccbytes) {
+ printk(KERN_WARNING "ecc parameters not supplied\n");
+@@ -158,7 +159,7 @@ nand_bch_init(struct mtd_info *mtd, unsi
+ eccsteps = mtd->writesize/eccsize;
+
+ /* if no ecc placement scheme was provided, build one */
+- if (!*ecclayout) {
++ if (!mtd->ooblayout) {
+
+ /* handle large page devices only */
+ if (mtd->oobsize < 64) {
+@@ -167,24 +168,7 @@ nand_bch_init(struct mtd_info *mtd, unsi
+ goto fail;
+ }
+
+- layout = &nbc->ecclayout;
+- layout->eccbytes = eccsteps*eccbytes;
+-
+- /* reserve 2 bytes for bad block marker */
+- if (layout->eccbytes+2 > mtd->oobsize) {
+- printk(KERN_WARNING "no suitable oob scheme available "
+- "for oobsize %d eccbytes %u\n", mtd->oobsize,
+- eccbytes);
+- goto fail;
+- }
+- /* put ecc bytes at oob tail */
+- for (i = 0; i < layout->eccbytes; i++)
+- layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
+-
+- layout->oobfree[0].offset = 2;
+- layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
+-
+- *ecclayout = layout;
++ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ }
+
+ /* sanity checks */
+@@ -192,7 +176,8 @@ nand_bch_init(struct mtd_info *mtd, unsi
+ printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
+ goto fail;
+ }
+- if ((*ecclayout)->eccbytes != (eccsteps*eccbytes)) {
++
++ if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
+ printk(KERN_WARNING "invalid ecc layout\n");
+ goto fail;
+ }
+@@ -216,6 +201,9 @@ nand_bch_init(struct mtd_info *mtd, unsi
+ for (i = 0; i < eccbytes; i++)
+ nbc->eccmask[i] ^= 0xff;
+
++ if (!eccstrength)
++ nand->ecc.strength = (eccbytes * 8) / fls(8 * eccsize);
++
+ return nbc;
+ fail:
+ nand_bch_free(nbc);
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -424,7 +424,7 @@ int nand_calculate_ecc(struct mtd_info *
+ unsigned char *code)
+ {
+ __nand_calculate_ecc(buf,
+- ((struct nand_chip *)mtd->priv)->ecc.size, code);
++ mtd_to_nand(mtd)->ecc.size, code);
+
+ return 0;
+ }
+@@ -524,7 +524,7 @@ int nand_correct_data(struct mtd_info *m
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+ {
+ return __nand_correct_data(buf, read_ecc, calc_ecc,
+- ((struct nand_chip *)mtd->priv)->ecc.size);
++ mtd_to_nand(mtd)->ecc.size);
+ }
+ EXPORT_SYMBOL(nand_correct_data);
+
+--- a/drivers/mtd/nand/nand_ids.c
++++ b/drivers/mtd/nand/nand_ids.c
+@@ -50,8 +50,8 @@ struct nand_flash_dev nand_flash_ids[] =
+ SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
+ {"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
+ { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
+- SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
+- 4 },
++ SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
++ NAND_ECC_INFO(40, SZ_1K), 4 },
+
+ LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
+--- a/drivers/mtd/nand/nandsim.c
++++ b/drivers/mtd/nand/nandsim.c
+@@ -666,8 +666,8 @@ static char *get_partition_name(int i)
+ */
+ static int init_nandsim(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = mtd->priv;
+- struct nandsim *ns = chip->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nandsim *ns = nand_get_controller_data(chip);
+ int i, ret = 0;
+ uint64_t remains;
+ uint64_t next_offset;
+@@ -1908,7 +1908,8 @@ static void switch_state(struct nandsim
+
+ static u_char ns_nand_read_byte(struct mtd_info *mtd)
+ {
+- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nandsim *ns = nand_get_controller_data(chip);
+ u_char outb = 0x00;
+
+ /* Sanity and correctness checks */
+@@ -1969,7 +1970,8 @@ static u_char ns_nand_read_byte(struct m
+
+ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
+ {
+- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nandsim *ns = nand_get_controller_data(chip);
+
+ /* Sanity and correctness checks */
+ if (!ns->lines.ce) {
+@@ -2123,7 +2125,8 @@ static void ns_nand_write_byte(struct mt
+
+ static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask)
+ {
+- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nandsim *ns = nand_get_controller_data(chip);
+
+ ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
+ ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
+@@ -2141,7 +2144,7 @@ static int ns_device_ready(struct mtd_in
+
+ static uint16_t ns_nand_read_word(struct mtd_info *mtd)
+ {
+- struct nand_chip *chip = (struct nand_chip *)mtd->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ NS_DBG("read_word\n");
+
+@@ -2150,7 +2153,8 @@ static uint16_t ns_nand_read_word(struct
+
+ static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+ {
+- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nandsim *ns = nand_get_controller_data(chip);
+
+ /* Check that chip is expecting data input */
+ if (!(ns->state & STATE_DATAIN_MASK)) {
+@@ -2177,7 +2181,8 @@ static void ns_nand_write_buf(struct mtd
+
+ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+ {
+- struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
++ struct nand_chip *chip = mtd_to_nand(mtd);
++ struct nandsim *ns = nand_get_controller_data(chip);
+
+ /* Sanity and correctness checks */
+ if (!ns->lines.ce) {
+@@ -2198,7 +2203,7 @@ static void ns_nand_read_buf(struct mtd_
+ int i;
+
+ for (i = 0; i < len; i++)
+- buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd);
++ buf[i] = mtd_to_nand(mtd)->read_byte(mtd);
+
+ return;
+ }
+@@ -2236,16 +2241,15 @@ static int __init ns_init_module(void)
+ }
+
+ /* Allocate and initialize mtd_info, nand_chip and nandsim structures */
+- nsmtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
+- + sizeof(struct nandsim), GFP_KERNEL);
+- if (!nsmtd) {
++ chip = kzalloc(sizeof(struct nand_chip) + sizeof(struct nandsim),
++ GFP_KERNEL);
++ if (!chip) {
+ NS_ERR("unable to allocate core structures.\n");
+ return -ENOMEM;
+ }
+- chip = (struct nand_chip *)(nsmtd + 1);
+- nsmtd->priv = (void *)chip;
++ nsmtd = nand_to_mtd(chip);
+ nand = (struct nandsim *)(chip + 1);
+- chip->priv = (void *)nand;
++ nand_set_controller_data(chip, (void *)nand);
+
+ /*
+ * Register simulator's callbacks.
+@@ -2257,6 +2261,7 @@ static int __init ns_init_module(void)
+ chip->read_buf = ns_nand_read_buf;
+ chip->read_word = ns_nand_read_word;
+ chip->ecc.mode = NAND_ECC_SOFT;
++ chip->ecc.algo = NAND_ECC_HAMMING;
+ /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
+ /* and 'badblocks' parameters to work */
+ chip->options |= NAND_SKIP_BBTSCAN;
+@@ -2335,6 +2340,7 @@ static int __init ns_init_module(void)
+ goto error;
+ }
+ chip->ecc.mode = NAND_ECC_SOFT_BCH;
++ chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.size = 512;
+ chip->ecc.strength = bch;
+ chip->ecc.bytes = eccbytes;
+@@ -2392,7 +2398,7 @@ err_exit:
+ for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
+ kfree(nand->partitions[i].name);
+ error:
+- kfree(nsmtd);
++ kfree(chip);
+ free_lists();
+
+ return retval;
+@@ -2405,7 +2411,8 @@ module_init(ns_init_module);
+ */
+ static void __exit ns_cleanup_module(void)
+ {
+- struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
++ struct nand_chip *chip = mtd_to_nand(nsmtd);
++ struct nandsim *ns = nand_get_controller_data(chip);
+ int i;
+
+ nandsim_debugfs_remove(ns);
+@@ -2413,7 +2420,7 @@ static void __exit ns_cleanup_module(voi
+ nand_release(nsmtd); /* Unregister driver */
+ for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
+ kfree(ns->partitions[i].name);
+- kfree(nsmtd); /* Free other structures */
++ kfree(mtd_to_nand(nsmtd)); /* Free other structures */
+ free_lists();
+ }
+
+--- a/drivers/mtd/ofpart.c
++++ b/drivers/mtd/ofpart.c
+@@ -26,9 +26,10 @@ static bool node_has_compatible(struct d
+ }
+
+ static int parse_ofpart_partitions(struct mtd_info *master,
+- struct mtd_partition **pparts,
++ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+ {
++ struct mtd_partition *parts;
+ struct device_node *mtd_node;
+ struct device_node *ofpart_node;
+ const char *partname;
+@@ -37,10 +38,8 @@ static int parse_ofpart_partitions(struc
+ bool dedicated = true;
+
+
+- if (!data)
+- return 0;
+-
+- mtd_node = data->of_node;
++ /* Pull of_node from the master device node */
++ mtd_node = mtd_get_of_node(master);
+ if (!mtd_node)
+ return 0;
+
+@@ -72,8 +71,8 @@ static int parse_ofpart_partitions(struc
+ if (nr_parts == 0)
+ return 0;
+
+- *pparts = kzalloc(nr_parts * sizeof(**pparts), GFP_KERNEL);
+- if (!*pparts)
++ parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL);
++ if (!parts)
+ return -ENOMEM;
+
+ i = 0;
+@@ -107,19 +106,19 @@ static int parse_ofpart_partitions(struc
+ goto ofpart_fail;
+ }
+
+- (*pparts)[i].offset = of_read_number(reg, a_cells);
+- (*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
++ parts[i].offset = of_read_number(reg, a_cells);
++ parts[i].size = of_read_number(reg + a_cells, s_cells);
+
+ partname = of_get_property(pp, "label", &len);
+ if (!partname)
+ partname = of_get_property(pp, "name", &len);
+- (*pparts)[i].name = partname;
++ parts[i].name = partname;
+
+ if (of_get_property(pp, "read-only", &len))
+- (*pparts)[i].mask_flags |= MTD_WRITEABLE;
++ parts[i].mask_flags |= MTD_WRITEABLE;
+
+ if (of_get_property(pp, "lock", &len))
+- (*pparts)[i].mask_flags |= MTD_POWERUP_LOCK;
++ parts[i].mask_flags |= MTD_POWERUP_LOCK;
+
+ i++;
+ }
+@@ -127,6 +126,7 @@ static int parse_ofpart_partitions(struc
+ if (!nr_parts)
+ goto ofpart_none;
+
++ *pparts = parts;
+ return nr_parts;
+
+ ofpart_fail:
+@@ -135,21 +135,20 @@ ofpart_fail:
+ ret = -EINVAL;
+ ofpart_none:
+ of_node_put(pp);
+- kfree(*pparts);
+- *pparts = NULL;
++ kfree(parts);
+ return ret;
+ }
+
+ static struct mtd_part_parser ofpart_parser = {
+- .owner = THIS_MODULE,
+ .parse_fn = parse_ofpart_partitions,
+ .name = "ofpart",
+ };
+
+ static int parse_ofoldpart_partitions(struct mtd_info *master,
+- struct mtd_partition **pparts,
++ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+ {
++ struct mtd_partition *parts;
+ struct device_node *dp;
+ int i, plen, nr_parts;
+ const struct {
+@@ -157,10 +156,8 @@ static int parse_ofoldpart_partitions(st
+ } *part;
+ const char *names;
+
+- if (!data)
+- return 0;
+-
+- dp = data->of_node;
++ /* Pull of_node from the master device node */
++ dp = mtd_get_of_node(master);
+ if (!dp)
+ return 0;
+
+@@ -173,37 +170,37 @@ static int parse_ofoldpart_partitions(st
+
+ nr_parts = plen / sizeof(part[0]);
+
+- *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
+- if (!*pparts)
++ parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL);
++ if (!parts)
+ return -ENOMEM;
+
+ names = of_get_property(dp, "partition-names", &plen);
+
+ for (i = 0; i < nr_parts; i++) {
+- (*pparts)[i].offset = be32_to_cpu(part->offset);
+- (*pparts)[i].size = be32_to_cpu(part->len) & ~1;
++ parts[i].offset = be32_to_cpu(part->offset);
++ parts[i].size = be32_to_cpu(part->len) & ~1;
+ /* bit 0 set signifies read only partition */
+ if (be32_to_cpu(part->len) & 1)
+- (*pparts)[i].mask_flags = MTD_WRITEABLE;
++ parts[i].mask_flags = MTD_WRITEABLE;
+
+ if (names && (plen > 0)) {
+ int len = strlen(names) + 1;
+
+- (*pparts)[i].name = names;
++ parts[i].name = names;
+ plen -= len;
+ names += len;
+ } else {
+- (*pparts)[i].name = "unnamed";
++ parts[i].name = "unnamed";
+ }
+
+ part++;
+ }
+
++ *pparts = parts;
+ return nr_parts;
+ }
+
+ static struct mtd_part_parser ofoldpart_parser = {
+- .owner = THIS_MODULE,
+ .parse_fn = parse_ofoldpart_partitions,
+ .name = "ofoldpart",
+ };
+--- a/drivers/mtd/spi-nor/Kconfig
++++ b/drivers/mtd/spi-nor/Kconfig
+@@ -7,6 +7,14 @@ menuconfig MTD_SPI_NOR
+
+ if MTD_SPI_NOR
+
++config MTD_MT81xx_NOR
++ tristate "Mediatek MT81xx SPI NOR flash controller"
++ depends on HAS_IOMEM
++ help
++ This enables access to SPI NOR flash, using MT81xx SPI NOR flash
++ controller. This controller does not support generic SPI BUS, it only
++ supports SPI NOR Flash.
++
+ config MTD_SPI_NOR_USE_4K_SECTORS
+ bool "Use small 4096 B erase sectors"
+ default y
+@@ -23,7 +31,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS
+
+ config SPI_FSL_QUADSPI
+ tristate "Freescale Quad SPI controller"
+- depends on ARCH_MXC || COMPILE_TEST
++ depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This enables support for the Quad SPI controller in master mode.
+--- a/drivers/mtd/spi-nor/Makefile
++++ b/drivers/mtd/spi-nor/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
+ obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
++obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o
+ obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
+--- /dev/null
++++ b/drivers/mtd/spi-nor/mtk-quadspi.c
+@@ -0,0 +1,485 @@
++/*
++ * Copyright (c) 2015 MediaTek Inc.
++ * Author: Bayi Cheng <bayi.cheng@mediatek.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/iopoll.h>
++#include <linux/ioport.h>
++#include <linux/math64.h>
++#include <linux/module.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mutex.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/spi-nor.h>
++
++#define MTK_NOR_CMD_REG 0x00
++#define MTK_NOR_CNT_REG 0x04
++#define MTK_NOR_RDSR_REG 0x08
++#define MTK_NOR_RDATA_REG 0x0c
++#define MTK_NOR_RADR0_REG 0x10
++#define MTK_NOR_RADR1_REG 0x14
++#define MTK_NOR_RADR2_REG 0x18
++#define MTK_NOR_WDATA_REG 0x1c
++#define MTK_NOR_PRGDATA0_REG 0x20
++#define MTK_NOR_PRGDATA1_REG 0x24
++#define MTK_NOR_PRGDATA2_REG 0x28
++#define MTK_NOR_PRGDATA3_REG 0x2c
++#define MTK_NOR_PRGDATA4_REG 0x30
++#define MTK_NOR_PRGDATA5_REG 0x34
++#define MTK_NOR_SHREG0_REG 0x38
++#define MTK_NOR_SHREG1_REG 0x3c
++#define MTK_NOR_SHREG2_REG 0x40
++#define MTK_NOR_SHREG3_REG 0x44
++#define MTK_NOR_SHREG4_REG 0x48
++#define MTK_NOR_SHREG5_REG 0x4c
++#define MTK_NOR_SHREG6_REG 0x50
++#define MTK_NOR_SHREG7_REG 0x54
++#define MTK_NOR_SHREG8_REG 0x58
++#define MTK_NOR_SHREG9_REG 0x5c
++#define MTK_NOR_CFG1_REG 0x60
++#define MTK_NOR_CFG2_REG 0x64
++#define MTK_NOR_CFG3_REG 0x68
++#define MTK_NOR_STATUS0_REG 0x70
++#define MTK_NOR_STATUS1_REG 0x74
++#define MTK_NOR_STATUS2_REG 0x78
++#define MTK_NOR_STATUS3_REG 0x7c
++#define MTK_NOR_FLHCFG_REG 0x84
++#define MTK_NOR_TIME_REG 0x94
++#define MTK_NOR_PP_DATA_REG 0x98
++#define MTK_NOR_PREBUF_STUS_REG 0x9c
++#define MTK_NOR_DELSEL0_REG 0xa0
++#define MTK_NOR_DELSEL1_REG 0xa4
++#define MTK_NOR_INTRSTUS_REG 0xa8
++#define MTK_NOR_INTREN_REG 0xac
++#define MTK_NOR_CHKSUM_CTL_REG 0xb8
++#define MTK_NOR_CHKSUM_REG 0xbc
++#define MTK_NOR_CMD2_REG 0xc0
++#define MTK_NOR_WRPROT_REG 0xc4
++#define MTK_NOR_RADR3_REG 0xc8
++#define MTK_NOR_DUAL_REG 0xcc
++#define MTK_NOR_DELSEL2_REG 0xd0
++#define MTK_NOR_DELSEL3_REG 0xd4
++#define MTK_NOR_DELSEL4_REG 0xd8
++
++/* commands for mtk nor controller */
++#define MTK_NOR_READ_CMD 0x0
++#define MTK_NOR_RDSR_CMD 0x2
++#define MTK_NOR_PRG_CMD 0x4
++#define MTK_NOR_WR_CMD 0x10
++#define MTK_NOR_PIO_WR_CMD 0x90
++#define MTK_NOR_WRSR_CMD 0x20
++#define MTK_NOR_PIO_READ_CMD 0x81
++#define MTK_NOR_WR_BUF_ENABLE 0x1
++#define MTK_NOR_WR_BUF_DISABLE 0x0
++#define MTK_NOR_ENABLE_SF_CMD 0x30
++#define MTK_NOR_DUAD_ADDR_EN 0x8
++#define MTK_NOR_QUAD_READ_EN 0x4
++#define MTK_NOR_DUAL_ADDR_EN 0x2
++#define MTK_NOR_DUAL_READ_EN 0x1
++#define MTK_NOR_DUAL_DISABLE 0x0
++#define MTK_NOR_FAST_READ 0x1
++
++#define SFLASH_WRBUF_SIZE 128
++
++/* Can shift up to 48 bits (6 bytes) of TX/RX */
++#define MTK_NOR_MAX_RX_TX_SHIFT 6
++/* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */
++#define MTK_NOR_MAX_SHIFT 7
++
++/* Helpers for accessing the program data / shift data registers */
++#define MTK_NOR_PRG_REG(n) (MTK_NOR_PRGDATA0_REG + 4 * (n))
++#define MTK_NOR_SHREG(n) (MTK_NOR_SHREG0_REG + 4 * (n))
++
++struct mt8173_nor {
++ struct spi_nor nor;
++ struct device *dev;
++ void __iomem *base; /* nor flash base address */
++ struct clk *spi_clk;
++ struct clk *nor_clk;
++};
++
++static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor)
++{
++ struct spi_nor *nor = &mt8173_nor->nor;
++
++ switch (nor->flash_read) {
++ case SPI_NOR_FAST:
++ writeb(nor->read_opcode, mt8173_nor->base +
++ MTK_NOR_PRGDATA3_REG);
++ writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
++ MTK_NOR_CFG1_REG);
++ break;
++ case SPI_NOR_DUAL:
++ writeb(nor->read_opcode, mt8173_nor->base +
++ MTK_NOR_PRGDATA3_REG);
++ writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
++ MTK_NOR_DUAL_REG);
++ break;
++ case SPI_NOR_QUAD:
++ writeb(nor->read_opcode, mt8173_nor->base +
++ MTK_NOR_PRGDATA4_REG);
++ writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
++ MTK_NOR_DUAL_REG);
++ break;
++ default:
++ writeb(MTK_NOR_DUAL_DISABLE, mt8173_nor->base +
++ MTK_NOR_DUAL_REG);
++ break;
++ }
++}
++
++static int mt8173_nor_execute_cmd(struct mt8173_nor *mt8173_nor, u8 cmdval)
++{
++ int reg;
++ u8 val = cmdval & 0x1f;
++
++ writeb(cmdval, mt8173_nor->base + MTK_NOR_CMD_REG);
++ return readl_poll_timeout(mt8173_nor->base + MTK_NOR_CMD_REG, reg,
++ !(reg & val), 100, 10000);
++}
++
++static int mt8173_nor_do_tx_rx(struct mt8173_nor *mt8173_nor, u8 op,
++ u8 *tx, int txlen, u8 *rx, int rxlen)
++{
++ int len = 1 + txlen + rxlen;
++ int i, ret, idx;
++
++ if (len > MTK_NOR_MAX_SHIFT)
++ return -EINVAL;
++
++ writeb(len * 8, mt8173_nor->base + MTK_NOR_CNT_REG);
++
++ /* start at PRGDATA5, go down to PRGDATA0 */
++ idx = MTK_NOR_MAX_RX_TX_SHIFT - 1;
++
++ /* opcode */
++ writeb(op, mt8173_nor->base + MTK_NOR_PRG_REG(idx));
++ idx--;
++
++ /* program TX data */
++ for (i = 0; i < txlen; i++, idx--)
++ writeb(tx[i], mt8173_nor->base + MTK_NOR_PRG_REG(idx));
++
++ /* clear out rest of TX registers */
++ while (idx >= 0) {
++ writeb(0, mt8173_nor->base + MTK_NOR_PRG_REG(idx));
++ idx--;
++ }
++
++ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PRG_CMD);
++ if (ret)
++ return ret;
++
++ /* restart at first RX byte */
++ idx = rxlen - 1;
++
++ /* read out RX data */
++ for (i = 0; i < rxlen; i++, idx--)
++ rx[i] = readb(mt8173_nor->base + MTK_NOR_SHREG(idx));
++
++ return 0;
++}
++
++/* Do a WRSR (Write Status Register) command */
++static int mt8173_nor_wr_sr(struct mt8173_nor *mt8173_nor, u8 sr)
++{
++ writeb(sr, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
++ writeb(8, mt8173_nor->base + MTK_NOR_CNT_REG);
++ return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WRSR_CMD);
++}
++
++static int mt8173_nor_write_buffer_enable(struct mt8173_nor *mt8173_nor)
++{
++ u8 reg;
++
++ /* the bit0 of MTK_NOR_CFG2_REG is pre-fetch buffer
++ * 0: pre-fetch buffer use for read
++ * 1: pre-fetch buffer use for page program
++ */
++ writel(MTK_NOR_WR_BUF_ENABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
++ return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
++ 0x01 == (reg & 0x01), 100, 10000);
++}
++
++static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor)
++{
++ u8 reg;
++
++ writel(MTK_NOR_WR_BUF_DISABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
++ return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
++ MTK_NOR_WR_BUF_DISABLE == (reg & 0x1), 100,
++ 10000);
++}
++
++static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr)
++{
++ int i;
++
++ for (i = 0; i < 3; i++) {
++ writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR0_REG + i * 4);
++ addr >>= 8;
++ }
++ /* Last register is non-contiguous */
++ writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR3_REG);
++}
++
++static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t length,
++ size_t *retlen, u_char *buffer)
++{
++ int i, ret;
++ int addr = (int)from;
++ u8 *buf = (u8 *)buffer;
++ struct mt8173_nor *mt8173_nor = nor->priv;
++
++ /* set mode for fast read mode ,dual mode or quad mode */
++ mt8173_nor_set_read_mode(mt8173_nor);
++ mt8173_nor_set_addr(mt8173_nor, addr);
++
++ for (i = 0; i < length; i++, (*retlen)++) {
++ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD);
++ if (ret < 0)
++ return ret;
++ buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG);
++ }
++ return 0;
++}
++
++static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor,
++ int addr, int length, u8 *data)
++{
++ int i, ret;
++
++ mt8173_nor_set_addr(mt8173_nor, addr);
++
++ for (i = 0; i < length; i++) {
++ writeb(*data++, mt8173_nor->base + MTK_NOR_WDATA_REG);
++ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_WR_CMD);
++ if (ret < 0)
++ return ret;
++ }
++ return 0;
++}
++
++static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int addr,
++ const u8 *buf)
++{
++ int i, bufidx, data;
++
++ mt8173_nor_set_addr(mt8173_nor, addr);
++
++ bufidx = 0;
++ for (i = 0; i < SFLASH_WRBUF_SIZE; i += 4) {
++ data = buf[bufidx + 3]<<24 | buf[bufidx + 2]<<16 |
++ buf[bufidx + 1]<<8 | buf[bufidx];
++ bufidx += 4;
++ writel(data, mt8173_nor->base + MTK_NOR_PP_DATA_REG);
++ }
++ return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD);
++}
++
++static void mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len,
++ size_t *retlen, const u_char *buf)
++{
++ int ret;
++ struct mt8173_nor *mt8173_nor = nor->priv;
++
++ ret = mt8173_nor_write_buffer_enable(mt8173_nor);
++ if (ret < 0)
++ dev_warn(mt8173_nor->dev, "write buffer enable failed!\n");
++
++ while (len >= SFLASH_WRBUF_SIZE) {
++ ret = mt8173_nor_write_buffer(mt8173_nor, to, buf);
++ if (ret < 0)
++ dev_err(mt8173_nor->dev, "write buffer failed!\n");
++ len -= SFLASH_WRBUF_SIZE;
++ to += SFLASH_WRBUF_SIZE;
++ buf += SFLASH_WRBUF_SIZE;
++ (*retlen) += SFLASH_WRBUF_SIZE;
++ }
++ ret = mt8173_nor_write_buffer_disable(mt8173_nor);
++ if (ret < 0)
++ dev_warn(mt8173_nor->dev, "write buffer disable failed!\n");
++
++ if (len) {
++ ret = mt8173_nor_write_single_byte(mt8173_nor, to, (int)len,
++ (u8 *)buf);
++ if (ret < 0)
++ dev_err(mt8173_nor->dev, "write single byte failed!\n");
++ (*retlen) += len;
++ }
++}
++
++static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
++{
++ int ret;
++ struct mt8173_nor *mt8173_nor = nor->priv;
++
++ switch (opcode) {
++ case SPINOR_OP_RDSR:
++ ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_RDSR_CMD);
++ if (ret < 0)
++ return ret;
++ if (len == 1)
++ *buf = readb(mt8173_nor->base + MTK_NOR_RDSR_REG);
++ else
++ dev_err(mt8173_nor->dev, "len should be 1 for read status!\n");
++ break;
++ default:
++ ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, NULL, 0, buf, len);
++ break;
++ }
++ return ret;
++}
++
++static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
++ int len)
++{
++ int ret;
++ struct mt8173_nor *mt8173_nor = nor->priv;
++
++ switch (opcode) {
++ case SPINOR_OP_WRSR:
++ /* We only handle 1 byte */
++ ret = mt8173_nor_wr_sr(mt8173_nor, *buf);
++ break;
++ default:
++ ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, buf, len, NULL, 0);
++ if (ret)
++ dev_warn(mt8173_nor->dev, "write reg failure!\n");
++ break;
++ }
++ return ret;
++}
++
++static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
++ struct device_node *flash_node)
++{
++ int ret;
++ struct spi_nor *nor;
++
++ /* initialize controller to accept commands */
++ writel(MTK_NOR_ENABLE_SF_CMD, mt8173_nor->base + MTK_NOR_WRPROT_REG);
++
++ nor = &mt8173_nor->nor;
++ nor->dev = mt8173_nor->dev;
++ nor->priv = mt8173_nor;
++ spi_nor_set_flash_node(nor, flash_node);
++
++ /* fill the hooks to spi nor */
++ nor->read = mt8173_nor_read;
++ nor->read_reg = mt8173_nor_read_reg;
++ nor->write = mt8173_nor_write;
++ nor->write_reg = mt8173_nor_write_reg;
++ nor->mtd.name = "mtk_nor";
++ /* initialized with NULL */
++ ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL);
++ if (ret)
++ return ret;
++
++ return mtd_device_register(&nor->mtd, NULL, 0);
++}
++
++static int mtk_nor_drv_probe(struct platform_device *pdev)
++{
++ struct device_node *flash_np;
++ struct resource *res;
++ int ret;
++ struct mt8173_nor *mt8173_nor;
++
++ if (!pdev->dev.of_node) {
++ dev_err(&pdev->dev, "No DT found\n");
++ return -EINVAL;
++ }
++
++ mt8173_nor = devm_kzalloc(&pdev->dev, sizeof(*mt8173_nor), GFP_KERNEL);
++ if (!mt8173_nor)
++ return -ENOMEM;
++ platform_set_drvdata(pdev, mt8173_nor);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ mt8173_nor->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(mt8173_nor->base))
++ return PTR_ERR(mt8173_nor->base);
++
++ mt8173_nor->spi_clk = devm_clk_get(&pdev->dev, "spi");
++ if (IS_ERR(mt8173_nor->spi_clk))
++ return PTR_ERR(mt8173_nor->spi_clk);
++
++ mt8173_nor->nor_clk = devm_clk_get(&pdev->dev, "sf");
++ if (IS_ERR(mt8173_nor->nor_clk))
++ return PTR_ERR(mt8173_nor->nor_clk);
++
++ mt8173_nor->dev = &pdev->dev;
++ ret = clk_prepare_enable(mt8173_nor->spi_clk);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(mt8173_nor->nor_clk);
++ if (ret) {
++ clk_disable_unprepare(mt8173_nor->spi_clk);
++ return ret;
++ }
++ /* only support one attached flash */
++ flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
++ if (!flash_np) {
++ dev_err(&pdev->dev, "no SPI flash device to configure\n");
++ ret = -ENODEV;
++ goto nor_free;
++ }
++ ret = mtk_nor_init(mt8173_nor, flash_np);
++
++nor_free:
++ if (ret) {
++ clk_disable_unprepare(mt8173_nor->spi_clk);
++ clk_disable_unprepare(mt8173_nor->nor_clk);
++ }
++ return ret;
++}
++
++static int mtk_nor_drv_remove(struct platform_device *pdev)
++{
++ struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
++
++ clk_disable_unprepare(mt8173_nor->spi_clk);
++ clk_disable_unprepare(mt8173_nor->nor_clk);
++ return 0;
++}
++
++static const struct of_device_id mtk_nor_of_ids[] = {
++ { .compatible = "mediatek,mt8173-nor"},
++ { /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, mtk_nor_of_ids);
++
++static struct platform_driver mtk_nor_driver = {
++ .probe = mtk_nor_drv_probe,
++ .remove = mtk_nor_drv_remove,
++ .driver = {
++ .name = "mtk-nor",
++ .of_match_table = mtk_nor_of_ids,
++ },
++};
++
++module_platform_driver(mtk_nor_driver);
++MODULE_LICENSE("GPL v2");
++MODULE_DESCRIPTION("MediaTek SPI NOR Flash Driver");
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -38,6 +38,7 @@
+ #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ)
+
+ #define SPI_NOR_MAX_ID_LEN 6
++#define SPI_NOR_MAX_ADDR_WIDTH 4
+
+ struct flash_info {
+ char *name;
+@@ -60,14 +61,20 @@ struct flash_info {
+ u16 addr_width;
+
+ u16 flags;
+-#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
+-#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
+-#define SST_WRITE 0x04 /* use SST byte programming */
+-#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
+-#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
+-#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
+-#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
+-#define USE_FSR 0x80 /* use flag status register */
++#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
++#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
++#define SST_WRITE BIT(2) /* use SST byte programming */
++#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
++#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
++#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
++#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */
++#define USE_FSR BIT(7) /* use flag status register */
++#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */
++#define SPI_NOR_HAS_TB BIT(9) /*
++ * Flash SR has Top/Bottom (TB) protect
++ * bit. Must be used with
++ * SPI_NOR_HAS_LOCK.
++ */
+ };
+
+ #define JEDEC_MFR(info) ((info)->id[0])
+@@ -313,6 +320,29 @@ static void spi_nor_unlock_and_unprep(st
+ }
+
+ /*
++ * Initiate the erasure of a single sector
++ */
++static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
++{
++ u8 buf[SPI_NOR_MAX_ADDR_WIDTH];
++ int i;
++
++ if (nor->erase)
++ return nor->erase(nor, addr);
++
++ /*
++ * Default implementation, if driver doesn't have a specialized HW
++ * control
++ */
++ for (i = nor->addr_width - 1; i >= 0; i--) {
++ buf[i] = addr & 0xff;
++ addr >>= 8;
++ }
++
++ return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width);
++}
++
++/*
+ * Erase an address range on the nor chip. The address range may extend
+ * one or more erase sectors. Return an error is there is a problem erasing.
+ */
+@@ -371,10 +401,9 @@ static int spi_nor_erase(struct mtd_info
+ while (len) {
+ write_enable(nor);
+
+- if (nor->erase(nor, addr)) {
+- ret = -EIO;
++ ret = spi_nor_erase_sector(nor, addr);
++ if (ret)
+ goto erase_err;
+- }
+
+ addr += mtd->erasesize;
+ len -= mtd->erasesize;
+@@ -387,17 +416,13 @@ static int spi_nor_erase(struct mtd_info
+
+ write_disable(nor);
+
++erase_err:
+ spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
+
+- instr->state = MTD_ERASE_DONE;
++ instr->state = ret ? MTD_ERASE_FAILED : MTD_ERASE_DONE;
+ mtd_erase_callback(instr);
+
+ return ret;
+-
+-erase_err:
+- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
+- instr->state = MTD_ERASE_FAILED;
+- return ret;
+ }
+
+ static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
+@@ -415,32 +440,58 @@ static void stm_get_locked_range(struct
+ } else {
+ pow = ((sr & mask) ^ mask) >> shift;
+ *len = mtd->size >> pow;
+- *ofs = mtd->size - *len;
++ if (nor->flags & SNOR_F_HAS_SR_TB && sr & SR_TB)
++ *ofs = 0;
++ else
++ *ofs = mtd->size - *len;
+ }
+ }
+
+ /*
+- * Return 1 if the entire region is locked, 0 otherwise
++ * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
++ * @locked is false); 0 otherwise
+ */
+-static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+- u8 sr)
++static int stm_check_lock_status_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
++ u8 sr, bool locked)
+ {
+ loff_t lock_offs;
+ uint64_t lock_len;
+
++ if (!len)
++ return 1;
++
+ stm_get_locked_range(nor, sr, &lock_offs, &lock_len);
+
+- return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
++ if (locked)
++ /* Requested range is a sub-range of locked range */
++ return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
++ else
++ /* Requested range does not overlap with locked range */
++ return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
++}
++
++static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
++ u8 sr)
++{
++ return stm_check_lock_status_sr(nor, ofs, len, sr, true);
++}
++
++static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
++ u8 sr)
++{
++ return stm_check_lock_status_sr(nor, ofs, len, sr, false);
+ }
+
+ /*
+ * Lock a region of the flash. Compatible with ST Micro and similar flash.
+- * Supports only the block protection bits BP{0,1,2} in the status register
++ * Supports the block protection bits BP{0,1,2} in the status register
+ * (SR). Does not support these features found in newer SR bitfields:
+- * - TB: top/bottom protect - only handle TB=0 (top protect)
+ * - SEC: sector/block protect - only handle SEC=0 (block protect)
+ * - CMP: complement protect - only support CMP=0 (range is not complemented)
+ *
++ * Support for the following is provided conditionally for some flash:
++ * - TB: top/bottom protect
++ *
+ * Sample table portion for 8MB flash (Winbond w25q64fw):
+ *
+ * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion
+@@ -453,26 +504,55 @@ static int stm_is_locked_sr(struct spi_n
+ * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4
+ * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2
+ * X | X | 1 | 1 | 1 | 8 MB | ALL
++ * ------|-------|-------|-------|-------|---------------|-------------------
++ * 0 | 1 | 0 | 0 | 1 | 128 KB | Lower 1/64
++ * 0 | 1 | 0 | 1 | 0 | 256 KB | Lower 1/32
++ * 0 | 1 | 0 | 1 | 1 | 512 KB | Lower 1/16
++ * 0 | 1 | 1 | 0 | 0 | 1 MB | Lower 1/8
++ * 0 | 1 | 1 | 0 | 1 | 2 MB | Lower 1/4
++ * 0 | 1 | 1 | 1 | 0 | 4 MB | Lower 1/2
+ *
+ * Returns negative on errors, 0 on success.
+ */
+ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+ {
+ struct mtd_info *mtd = &nor->mtd;
+- u8 status_old, status_new;
++ int status_old, status_new;
+ u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+ u8 shift = ffs(mask) - 1, pow, val;
++ loff_t lock_len;
++ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
++ bool use_top;
++ int ret;
+
+ status_old = read_sr(nor);
++ if (status_old < 0)
++ return status_old;
+
+- /* SPI NOR always locks to the end */
+- if (ofs + len != mtd->size) {
+- /* Does combined region extend to end? */
+- if (!stm_is_locked_sr(nor, ofs + len, mtd->size - ofs - len,
+- status_old))
+- return -EINVAL;
+- len = mtd->size - ofs;
+- }
++ /* If nothing in our range is unlocked, we don't need to do anything */
++ if (stm_is_locked_sr(nor, ofs, len, status_old))
++ return 0;
++
++ /* If anything below us is unlocked, we can't use 'bottom' protection */
++ if (!stm_is_locked_sr(nor, 0, ofs, status_old))
++ can_be_bottom = false;
++
++ /* If anything above us is unlocked, we can't use 'top' protection */
++ if (!stm_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
++ status_old))
++ can_be_top = false;
++
++ if (!can_be_bottom && !can_be_top)
++ return -EINVAL;
++
++ /* Prefer top, if both are valid */
++ use_top = can_be_top;
++
++ /* lock_len: length of region that should end up locked */
++ if (use_top)
++ lock_len = mtd->size - ofs;
++ else
++ lock_len = ofs + len;
+
+ /*
+ * Need smallest pow such that:
+@@ -483,7 +563,7 @@ static int stm_lock(struct spi_nor *nor,
+ *
+ * pow = ceil(log2(size / len)) = log2(size) - floor(log2(len))
+ */
+- pow = ilog2(mtd->size) - ilog2(len);
++ pow = ilog2(mtd->size) - ilog2(lock_len);
+ val = mask - (pow << shift);
+ if (val & ~mask)
+ return -EINVAL;
+@@ -491,14 +571,27 @@ static int stm_lock(struct spi_nor *nor,
+ if (!(val & mask))
+ return -EINVAL;
+
+- status_new = (status_old & ~mask) | val;
++ status_new = (status_old & ~mask & ~SR_TB) | val;
++
++ /* Disallow further writes if WP pin is asserted */
++ status_new |= SR_SRWD;
++
++ if (!use_top)
++ status_new |= SR_TB;
++
++ /* Don't bother if they're the same */
++ if (status_new == status_old)
++ return 0;
+
+ /* Only modify protection if it will not unlock other areas */
+- if ((status_new & mask) <= (status_old & mask))
++ if ((status_new & mask) < (status_old & mask))
+ return -EINVAL;
+
+ write_enable(nor);
+- return write_sr(nor, status_new);
++ ret = write_sr(nor, status_new);
++ if (ret)
++ return ret;
++ return spi_nor_wait_till_ready(nor);
+ }
+
+ /*
+@@ -509,17 +602,43 @@ static int stm_lock(struct spi_nor *nor,
+ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+ {
+ struct mtd_info *mtd = &nor->mtd;
+- uint8_t status_old, status_new;
++ int status_old, status_new;
+ u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+ u8 shift = ffs(mask) - 1, pow, val;
++ loff_t lock_len;
++ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
++ bool use_top;
++ int ret;
+
+ status_old = read_sr(nor);
++ if (status_old < 0)
++ return status_old;
++
++ /* If nothing in our range is locked, we don't need to do anything */
++ if (stm_is_unlocked_sr(nor, ofs, len, status_old))
++ return 0;
++
++ /* If anything below us is locked, we can't use 'top' protection */
++ if (!stm_is_unlocked_sr(nor, 0, ofs, status_old))
++ can_be_top = false;
++
++ /* If anything above us is locked, we can't use 'bottom' protection */
++ if (!stm_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
++ status_old))
++ can_be_bottom = false;
+
+- /* Cannot unlock; would unlock larger region than requested */
+- if (stm_is_locked_sr(nor, ofs - mtd->erasesize, mtd->erasesize,
+- status_old))
++ if (!can_be_bottom && !can_be_top)
+ return -EINVAL;
+
++ /* Prefer top, if both are valid */
++ use_top = can_be_top;
++
++ /* lock_len: length of region that should remain locked */
++ if (use_top)
++ lock_len = mtd->size - (ofs + len);
++ else
++ lock_len = ofs;
++
+ /*
+ * Need largest pow such that:
+ *
+@@ -529,8 +648,8 @@ static int stm_unlock(struct spi_nor *no
+ *
+ * pow = floor(log2(size / len)) = log2(size) - ceil(log2(len))
+ */
+- pow = ilog2(mtd->size) - order_base_2(mtd->size - (ofs + len));
+- if (ofs + len == mtd->size) {
++ pow = ilog2(mtd->size) - order_base_2(lock_len);
++ if (lock_len == 0) {
+ val = 0; /* fully unlocked */
+ } else {
+ val = mask - (pow << shift);
+@@ -539,14 +658,28 @@ static int stm_unlock(struct spi_nor *no
+ return -EINVAL;
+ }
+
+- status_new = (status_old & ~mask) | val;
++ status_new = (status_old & ~mask & ~SR_TB) | val;
++
++ /* Don't protect status register if we're fully unlocked */
++ if (lock_len == mtd->size)
++ status_new &= ~SR_SRWD;
++
++ if (!use_top)
++ status_new |= SR_TB;
++
++ /* Don't bother if they're the same */
++ if (status_new == status_old)
++ return 0;
+
+ /* Only modify protection if it will not lock other areas */
+- if ((status_new & mask) >= (status_old & mask))
++ if ((status_new & mask) > (status_old & mask))
+ return -EINVAL;
+
+ write_enable(nor);
+- return write_sr(nor, status_new);
++ ret = write_sr(nor, status_new);
++ if (ret)
++ return ret;
++ return spi_nor_wait_till_ready(nor);
+ }
+
+ /*
+@@ -736,8 +869,8 @@ static const struct flash_info spi_nor_i
+ { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
+- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
+- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
++ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
++ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+@@ -771,6 +904,7 @@ static const struct flash_info spi_nor_i
+ { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
++ { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
+ { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
+ { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) },
+@@ -834,11 +968,23 @@ static const struct flash_info spi_nor_i
+ { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
+ { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
+- { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
++ {
++ "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
++ },
+ { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+- { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+- { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
++ {
++ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
++ },
++ {
++ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
++ },
+ { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+@@ -861,7 +1007,7 @@ static const struct flash_info *spi_nor_
+
+ tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
+ if (tmp < 0) {
+- dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
++ dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp);
+ return ERR_PTR(tmp);
+ }
+
+@@ -872,7 +1018,7 @@ static const struct flash_info *spi_nor_
+ return &spi_nor_ids[tmp];
+ }
+ }
+- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n",
++ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
+ id[0], id[1], id[2]);
+ return ERR_PTR(-ENODEV);
+ }
+@@ -1018,6 +1164,8 @@ static int macronix_quad_enable(struct s
+ int ret, val;
+
+ val = read_sr(nor);
++ if (val < 0)
++ return val;
+ write_enable(nor);
+
+ write_sr(nor, val | SR_QUAD_EN_MX);
+@@ -1099,7 +1247,7 @@ static int set_quad_mode(struct spi_nor
+ static int spi_nor_check(struct spi_nor *nor)
+ {
+ if (!nor->dev || !nor->read || !nor->write ||
+- !nor->read_reg || !nor->write_reg || !nor->erase) {
++ !nor->read_reg || !nor->write_reg) {
+ pr_err("spi-nor: please fill all the necessary fields!\n");
+ return -EINVAL;
+ }
+@@ -1112,7 +1260,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+ const struct flash_info *info = NULL;
+ struct device *dev = nor->dev;
+ struct mtd_info *mtd = &nor->mtd;
+- struct device_node *np = nor->flash_node;
++ struct device_node *np = spi_nor_get_flash_node(nor);
+ int ret;
+ int i;
+
+@@ -1162,9 +1310,11 @@ int spi_nor_scan(struct spi_nor *nor, co
+ if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
+ JEDEC_MFR(info) == SNOR_MFR_INTEL ||
+ JEDEC_MFR(info) == SNOR_MFR_MACRONIX ||
+- JEDEC_MFR(info) == SNOR_MFR_SST) {
++ JEDEC_MFR(info) == SNOR_MFR_SST ||
++ info->flags & SPI_NOR_HAS_LOCK) {
+ write_enable(nor);
+ write_sr(nor, 0);
++ spi_nor_wait_till_ready(nor);
+ }
+
+ if (!mtd->name)
+@@ -1178,7 +1328,8 @@ int spi_nor_scan(struct spi_nor *nor, co
+ mtd->_read = spi_nor_read;
+
+ /* NOR protection support for STmicro/Micron chips and similar */
+- if (JEDEC_MFR(info) == SNOR_MFR_MICRON) {
++ if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
++ info->flags & SPI_NOR_HAS_LOCK) {
+ nor->flash_lock = stm_lock;
+ nor->flash_unlock = stm_unlock;
+ nor->flash_is_locked = stm_is_locked;
+@@ -1198,6 +1349,8 @@ int spi_nor_scan(struct spi_nor *nor, co
+
+ if (info->flags & USE_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
++ if (info->flags & SPI_NOR_HAS_TB)
++ nor->flags |= SNOR_F_HAS_SR_TB;
+
+ #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ /* prefer "small sector" erase if possible */
+@@ -1300,6 +1453,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+ nor->addr_width = 3;
+ }
+
++ if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
++ dev_err(dev, "address width is too large: %u\n",
++ nor->addr_width);
++ return -EINVAL;
++ }
++
+ nor->read_dummy = spi_nor_read_dummy_cycles(nor);
+
+ dev_info(dev, "%s (%lld Kbytes)\n", info->name,
+--- a/drivers/mtd/tests/mtd_nandecctest.c
++++ b/drivers/mtd/tests/mtd_nandecctest.c
+@@ -187,7 +187,7 @@ static int double_bit_error_detect(void
+ __nand_calculate_ecc(error_data, size, calc_ecc);
+ ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size);
+
+- return (ret == -1) ? 0 : -EINVAL;
++ return (ret == -EBADMSG) ? 0 : -EINVAL;
+ }
+
+ static const struct nand_ecc_test nand_ecc_test[] = {
+--- a/drivers/mtd/tests/oobtest.c
++++ b/drivers/mtd/tests/oobtest.c
+@@ -215,19 +215,19 @@ static int verify_eraseblock(int ebnum)
+ pr_info("ignoring error as within bitflip_limit\n");
+ }
+
+- if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
++ if (use_offset != 0 || use_len < mtd->oobavail) {
+ int k;
+
+ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = 0;
+ ops.retlen = 0;
+- ops.ooblen = mtd->ecclayout->oobavail;
++ ops.ooblen = mtd->oobavail;
+ ops.oobretlen = 0;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+ ops.oobbuf = readbuf;
+ err = mtd_read_oob(mtd, addr, &ops);
+- if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
++ if (err || ops.oobretlen != mtd->oobavail) {
+ pr_err("error: readoob failed at %#llx\n",
+ (long long)addr);
+ errcnt += 1;
+@@ -244,7 +244,7 @@ static int verify_eraseblock(int ebnum)
+ /* verify post-(use_offset + use_len) area for 0xff */
+ k = use_offset + use_len;
+ bitflips += memffshow(addr, k, readbuf + k,
+- mtd->ecclayout->oobavail - k);
++ mtd->oobavail - k);
+
+ if (bitflips > bitflip_limit) {
+ pr_err("error: verify failed at %#llx\n",
+@@ -269,8 +269,8 @@ static int verify_eraseblock_in_one_go(i
+ struct mtd_oob_ops ops;
+ int err = 0;
+ loff_t addr = (loff_t)ebnum * mtd->erasesize;
+- size_t len = mtd->ecclayout->oobavail * pgcnt;
+- size_t oobavail = mtd->ecclayout->oobavail;
++ size_t len = mtd->oobavail * pgcnt;
++ size_t oobavail = mtd->oobavail;
+ size_t bitflips;
+ int i;
+
+@@ -394,8 +394,8 @@ static int __init mtd_oobtest_init(void)
+ goto out;
+
+ use_offset = 0;
+- use_len = mtd->ecclayout->oobavail;
+- use_len_max = mtd->ecclayout->oobavail;
++ use_len = mtd->oobavail;
++ use_len_max = mtd->oobavail;
+ vary_offset = 0;
+
+ /* First test: write all OOB, read it back and verify */
+@@ -460,8 +460,8 @@ static int __init mtd_oobtest_init(void)
+
+ /* Write all eraseblocks */
+ use_offset = 0;
+- use_len = mtd->ecclayout->oobavail;
+- use_len_max = mtd->ecclayout->oobavail;
++ use_len = mtd->oobavail;
++ use_len_max = mtd->oobavail;
+ vary_offset = 1;
+ prandom_seed_state(&rnd_state, 5);
+
+@@ -471,8 +471,8 @@ static int __init mtd_oobtest_init(void)
+
+ /* Check all eraseblocks */
+ use_offset = 0;
+- use_len = mtd->ecclayout->oobavail;
+- use_len_max = mtd->ecclayout->oobavail;
++ use_len = mtd->oobavail;
++ use_len_max = mtd->oobavail;
+ vary_offset = 1;
+ prandom_seed_state(&rnd_state, 5);
+ err = verify_all_eraseblocks();
+@@ -480,8 +480,8 @@ static int __init mtd_oobtest_init(void)
+ goto out;
+
+ use_offset = 0;
+- use_len = mtd->ecclayout->oobavail;
+- use_len_max = mtd->ecclayout->oobavail;
++ use_len = mtd->oobavail;
++ use_len_max = mtd->oobavail;
+ vary_offset = 0;
+
+ /* Fourth test: try to write off end of device */
+@@ -501,7 +501,7 @@ static int __init mtd_oobtest_init(void)
+ ops.retlen = 0;
+ ops.ooblen = 1;
+ ops.oobretlen = 0;
+- ops.ooboffs = mtd->ecclayout->oobavail;
++ ops.ooboffs = mtd->oobavail;
+ ops.datbuf = NULL;
+ ops.oobbuf = writebuf;
+ pr_info("attempting to start write past end of OOB\n");
+@@ -521,7 +521,7 @@ static int __init mtd_oobtest_init(void)
+ ops.retlen = 0;
+ ops.ooblen = 1;
+ ops.oobretlen = 0;
+- ops.ooboffs = mtd->ecclayout->oobavail;
++ ops.ooboffs = mtd->oobavail;
+ ops.datbuf = NULL;
+ ops.oobbuf = readbuf;
+ pr_info("attempting to start read past end of OOB\n");
+@@ -543,7 +543,7 @@ static int __init mtd_oobtest_init(void)
+ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = 0;
+ ops.retlen = 0;
+- ops.ooblen = mtd->ecclayout->oobavail + 1;
++ ops.ooblen = mtd->oobavail + 1;
+ ops.oobretlen = 0;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+@@ -563,7 +563,7 @@ static int __init mtd_oobtest_init(void)
+ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = 0;
+ ops.retlen = 0;
+- ops.ooblen = mtd->ecclayout->oobavail + 1;
++ ops.ooblen = mtd->oobavail + 1;
+ ops.oobretlen = 0;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+@@ -587,7 +587,7 @@ static int __init mtd_oobtest_init(void)
+ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = 0;
+ ops.retlen = 0;
+- ops.ooblen = mtd->ecclayout->oobavail;
++ ops.ooblen = mtd->oobavail;
+ ops.oobretlen = 0;
+ ops.ooboffs = 1;
+ ops.datbuf = NULL;
+@@ -607,7 +607,7 @@ static int __init mtd_oobtest_init(void)
+ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = 0;
+ ops.retlen = 0;
+- ops.ooblen = mtd->ecclayout->oobavail;
++ ops.ooblen = mtd->oobavail;
+ ops.oobretlen = 0;
+ ops.ooboffs = 1;
+ ops.datbuf = NULL;
+@@ -638,7 +638,7 @@ static int __init mtd_oobtest_init(void)
+ for (i = 0; i < ebcnt - 1; ++i) {
+ int cnt = 2;
+ int pg;
+- size_t sz = mtd->ecclayout->oobavail;
++ size_t sz = mtd->oobavail;
+ if (bbt[i] || bbt[i + 1])
+ continue;
+ addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
+@@ -673,13 +673,12 @@ static int __init mtd_oobtest_init(void)
+ for (i = 0; i < ebcnt - 1; ++i) {
+ if (bbt[i] || bbt[i + 1])
+ continue;
+- prandom_bytes_state(&rnd_state, writebuf,
+- mtd->ecclayout->oobavail * 2);
++ prandom_bytes_state(&rnd_state, writebuf, mtd->oobavail * 2);
+ addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
+ ops.mode = MTD_OPS_AUTO_OOB;
+ ops.len = 0;
+ ops.retlen = 0;
+- ops.ooblen = mtd->ecclayout->oobavail * 2;
++ ops.ooblen = mtd->oobavail * 2;
+ ops.oobretlen = 0;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+@@ -688,7 +687,7 @@ static int __init mtd_oobtest_init(void)
+ if (err)
+ goto out;
+ if (memcmpshow(addr, readbuf, writebuf,
+- mtd->ecclayout->oobavail * 2)) {
++ mtd->oobavail * 2)) {
+ pr_err("error: verify failed at %#llx\n",
+ (long long)addr);
+ errcnt += 1;
+--- a/drivers/mtd/tests/pagetest.c
++++ b/drivers/mtd/tests/pagetest.c
+@@ -127,13 +127,12 @@ static int crosstest(void)
+ unsigned char *pp1, *pp2, *pp3, *pp4;
+
+ pr_info("crosstest\n");
+- pp1 = kmalloc(pgsize * 4, GFP_KERNEL);
++ pp1 = kzalloc(pgsize * 4, GFP_KERNEL);
+ if (!pp1)
+ return -ENOMEM;
+ pp2 = pp1 + pgsize;
+ pp3 = pp2 + pgsize;
+ pp4 = pp3 + pgsize;
+- memset(pp1, 0, pgsize * 4);
+
+ addr0 = 0;
+ for (i = 0; i < ebcnt && bbt[i]; ++i)
+--- a/include/linux/mtd/bbm.h
++++ b/include/linux/mtd/bbm.h
+@@ -166,7 +166,6 @@ struct bbm_info {
+ };
+
+ /* OneNAND BBT interface */
+-extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+ extern int onenand_default_bbt(struct mtd_info *mtd);
+
+ #endif /* __LINUX_MTD_BBM_H */
+--- a/include/linux/mtd/fsmc.h
++++ b/include/linux/mtd/fsmc.h
+@@ -103,24 +103,6 @@
+
+ #define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
+
+-/*
+- * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
+- * and it has to be read consecutively and immediately after the 512
+- * byte data block for hardware to generate the error bit offsets
+- * Managing the ecc bytes in the following way is easier. This way is
+- * similar to oobfree structure maintained already in u-boot nand driver
+- */
+-#define MAX_ECCPLACE_ENTRIES 32
+-
+-struct fsmc_nand_eccplace {
+- uint8_t offset;
+- uint8_t length;
+-};
+-
+-struct fsmc_eccplace {
+- struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
+-};
+-
+ struct fsmc_nand_timings {
+ uint8_t tclr;
+ uint8_t tar;
+--- a/include/linux/mtd/inftl.h
++++ b/include/linux/mtd/inftl.h
+@@ -44,7 +44,6 @@ struct INFTLrecord {
+ unsigned int nb_blocks; /* number of physical blocks */
+ unsigned int nb_boot_blocks; /* number of blocks used by the bios */
+ struct erase_info instr;
+- struct nand_ecclayout oobinfo;
+ };
+
+ int INFTL_mount(struct INFTLrecord *s);
+--- a/include/linux/mtd/map.h
++++ b/include/linux/mtd/map.h
+@@ -142,7 +142,9 @@
+ #endif
+
+ #ifndef map_bankwidth
++#ifdef CONFIG_MTD
+ #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work"
++#endif
+ static inline int map_bankwidth(void *map)
+ {
+ BUG();
+@@ -238,8 +240,11 @@ struct map_info {
+ If there is no cache to care about this can be set to NULL. */
+ void (*inval_cache)(struct map_info *, unsigned long, ssize_t);
+
+- /* set_vpp() must handle being reentered -- enable, enable, disable
+- must leave it enabled. */
++ /* This will be called with 1 as parameter when the first map user
++ * needs VPP, and called with 0 when the last user exits. The map
++ * core maintains a reference counter, and assumes that VPP is a
++ * global resource applying to all mapped flash chips on the system.
++ */
+ void (*set_vpp)(struct map_info *, int);
+
+ unsigned long pfow_base;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -100,17 +100,35 @@ struct mtd_oob_ops {
+
+ #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32
+ #define MTD_MAX_ECCPOS_ENTRIES_LARGE 640
++/**
++ * struct mtd_oob_region - oob region definition
++ * @offset: region offset
++ * @length: region length
++ *
++ * This structure describes a region of the OOB area, and is used
++ * to retrieve ECC or free bytes sections.
++ * Each section is defined by an offset within the OOB area and a
++ * length.
++ */
++struct mtd_oob_region {
++ u32 offset;
++ u32 length;
++};
++
+ /*
+- * Internal ECC layout control structure. For historical reasons, there is a
+- * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
+- * for export to user-space via the ECCGETLAYOUT ioctl.
+- * nand_ecclayout should be expandable in the future simply by the above macros.
++ * struct mtd_ooblayout_ops - NAND OOB layout operations
++ * @ecc: function returning an ECC region in the OOB area.
++ * Should return -ERANGE if %section exceeds the total number of
++ * ECC sections.
++ * @free: function returning a free region in the OOB area.
++ * Should return -ERANGE if %section exceeds the total number of
++ * free sections.
+ */
+-struct nand_ecclayout {
+- __u32 eccbytes;
+- __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
+- __u32 oobavail;
+- struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
++struct mtd_ooblayout_ops {
++ int (*ecc)(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobecc);
++ int (*free)(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobfree);
+ };
+
+ struct module; /* only needed for owner field in mtd_info */
+@@ -171,8 +189,8 @@ struct mtd_info {
+ const char *name;
+ int index;
+
+- /* ECC layout structure pointer - read only! */
+- struct nand_ecclayout *ecclayout;
++ /* OOB layout description */
++ const struct mtd_ooblayout_ops *ooblayout;
+
+ /* the ecc step size. */
+ unsigned int ecc_step_size;
+@@ -258,6 +276,46 @@ struct mtd_info {
+ int usecount;
+ };
+
++int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobecc);
++int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
++ int *section,
++ struct mtd_oob_region *oobregion);
++int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
++ const u8 *oobbuf, int start, int nbytes);
++int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
++ u8 *oobbuf, int start, int nbytes);
++int mtd_ooblayout_free(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobfree);
++int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
++ const u8 *oobbuf, int start, int nbytes);
++int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
++ u8 *oobbuf, int start, int nbytes);
++int mtd_ooblayout_count_freebytes(struct mtd_info *mtd);
++int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd);
++
++static inline void mtd_set_ooblayout(struct mtd_info *mtd,
++ const struct mtd_ooblayout_ops *ooblayout)
++{
++ mtd->ooblayout = ooblayout;
++}
++
++static inline void mtd_set_of_node(struct mtd_info *mtd,
++ struct device_node *np)
++{
++ mtd->dev.of_node = np;
++}
++
++static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
++{
++ return mtd->dev.of_node;
++}
++
++static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
++{
++ return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
++}
++
+ int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
+ int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+ void **virt, resource_size_t *phys);
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -119,6 +119,12 @@ typedef enum {
+ NAND_ECC_SOFT_BCH,
+ } nand_ecc_modes_t;
+
++enum nand_ecc_algo {
++ NAND_ECC_UNKNOWN,
++ NAND_ECC_HAMMING,
++ NAND_ECC_BCH,
++};
++
+ /*
+ * Constants for Hardware ECC
+ */
+@@ -129,6 +135,14 @@ typedef enum {
+ /* Enable Hardware ECC before syndrome is read back from flash */
+ #define NAND_ECC_READSYN 2
+
++/*
++ * Enable generic NAND 'page erased' check. This check is only done when
++ * ecc.correct() returns -EBADMSG.
++ * Set this flag if your implementation does not fix bitflips in erased
++ * pages and you want to rely on the default implementation.
++ */
++#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
++
+ /* Bit mask for flags passed to do_nand_read_ecc */
+ #define NAND_GET_DEVICE 0x80
+
+@@ -160,6 +174,12 @@ typedef enum {
+ /* Device supports subpage reads */
+ #define NAND_SUBPAGE_READ 0x00001000
+
++/*
++ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
++ * patterns.
++ */
++#define NAND_NEED_SCRAMBLING 0x00002000
++
+ /* Options valid for Samsung large page devices */
+ #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
+
+@@ -276,15 +296,15 @@ struct nand_onfi_params {
+ __le16 t_r;
+ __le16 t_ccs;
+ __le16 src_sync_timing_mode;
+- __le16 src_ssync_features;
++ u8 src_ssync_features;
+ __le16 clk_pin_capacitance_typ;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ u8 input_pin_capacitance_max;
+ u8 driver_strength_support;
+ __le16 t_int_r;
+- __le16 t_ald;
+- u8 reserved4[7];
++ __le16 t_adl;
++ u8 reserved4[8];
+
+ /* vendor */
+ __le16 vendor_revision;
+@@ -407,7 +427,7 @@ struct nand_jedec_params {
+ __le16 input_pin_capacitance_typ;
+ __le16 clk_pin_capacitance_typ;
+ u8 driver_strength_support;
+- __le16 t_ald;
++ __le16 t_adl;
+ u8 reserved4[36];
+
+ /* ECC and endurance block */
+@@ -444,6 +464,7 @@ struct nand_hw_control {
+ /**
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode: ECC mode
++ * @algo: ECC algorithm
+ * @steps: number of ECC steps per page
+ * @size: data bytes per ECC step
+ * @bytes: ECC bytes per step
+@@ -451,12 +472,18 @@ struct nand_hw_control {
+ * @total: total number of ECC bytes per page
+ * @prepad: padding information for syndrome based ECC generators
+ * @postpad: padding information for syndrome based ECC generators
+- * @layout: ECC layout control struct pointer
++ * @options: ECC specific options (see NAND_ECC_XXX flags defined above)
+ * @priv: pointer to private ECC control data
+ * @hwctl: function to control hardware ECC generator. Must only
+ * be provided if an hardware ECC is available
+ * @calculate: function for ECC calculation or readback from ECC hardware
+- * @correct: function for ECC correction, matching to ECC generator (sw/hw)
++ * @correct: function for ECC correction, matching to ECC generator (sw/hw).
++ * Should return a positive number representing the number of
++ * corrected bitflips, -EBADMSG if the number of bitflips exceed
++ * ECC strength, or any other error code if the error is not
++ * directly related to correction.
++ * If -EBADMSG is returned the input buffers should be left
++ * untouched.
+ * @read_page_raw: function to read a raw page without ECC. This function
+ * should hide the specific layout used by the ECC
+ * controller and always return contiguous in-band and
+@@ -487,6 +514,7 @@ struct nand_hw_control {
+ */
+ struct nand_ecc_ctrl {
+ nand_ecc_modes_t mode;
++ enum nand_ecc_algo algo;
+ int steps;
+ int size;
+ int bytes;
+@@ -494,7 +522,7 @@ struct nand_ecc_ctrl {
+ int strength;
+ int prepad;
+ int postpad;
+- struct nand_ecclayout *layout;
++ unsigned int options;
+ void *priv;
+ void (*hwctl)(struct mtd_info *mtd, int mode);
+ int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
+@@ -540,11 +568,11 @@ struct nand_buffers {
+
+ /**
+ * struct nand_chip - NAND Private Flash Chip Data
++ * @mtd: MTD device registered to the MTD framework
+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
+ * flash device
+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
+ * flash device.
+- * @flash_node: [BOARDSPECIFIC] device node describing this instance
+ * @read_byte: [REPLACEABLE] read one byte from the chip
+ * @read_word: [REPLACEABLE] read one word from the chip
+ * @write_byte: [REPLACEABLE] write a single byte to the chip on the
+@@ -640,18 +668,17 @@ struct nand_buffers {
+ */
+
+ struct nand_chip {
++ struct mtd_info mtd;
+ void __iomem *IO_ADDR_R;
+ void __iomem *IO_ADDR_W;
+
+- struct device_node *flash_node;
+-
+ uint8_t (*read_byte)(struct mtd_info *mtd);
+ u16 (*read_word)(struct mtd_info *mtd);
+ void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+- int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
++ int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ int (*dev_ready)(struct mtd_info *mtd);
+@@ -719,6 +746,40 @@ struct nand_chip {
+ void *priv;
+ };
+
++extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
++extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
++
++static inline void nand_set_flash_node(struct nand_chip *chip,
++ struct device_node *np)
++{
++ mtd_set_of_node(&chip->mtd, np);
++}
++
++static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
++{
++ return mtd_get_of_node(&chip->mtd);
++}
++
++static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
++{
++ return container_of(mtd, struct nand_chip, mtd);
++}
++
++static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip)
++{
++ return &chip->mtd;
++}
++
++static inline void *nand_get_controller_data(struct nand_chip *chip)
++{
++ return chip->priv;
++}
++
++static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
++{
++ chip->priv = priv;
++}
++
+ /*
+ * NAND Flash Manufacturer ID Codes
+ */
+@@ -850,7 +911,6 @@ extern int nand_do_read(struct mtd_info
+ * @chip_delay: R/B delay value in us
+ * @options: Option flags, e.g. 16bit buswidth
+ * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
+- * @ecclayout: ECC layout info structure
+ * @part_probe_types: NULL-terminated array of probe types
+ */
+ struct platform_nand_chip {
+@@ -858,7 +918,6 @@ struct platform_nand_chip {
+ int chip_offset;
+ int nr_partitions;
+ struct mtd_partition *partitions;
+- struct nand_ecclayout *ecclayout;
+ int chip_delay;
+ unsigned int options;
+ unsigned int bbt_options;
+@@ -908,15 +967,6 @@ struct platform_nand_data {
+ struct platform_nand_ctrl ctrl;
+ };
+
+-/* Some helpers to access the data structures */
+-static inline
+-struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
+-{
+- struct nand_chip *chip = mtd->priv;
+-
+- return chip->priv;
+-}
+-
+ /* return the supported features. */
+ static inline int onfi_feature(struct nand_chip *chip)
+ {
+--- a/include/linux/mtd/nand_bch.h
++++ b/include/linux/mtd/nand_bch.h
+@@ -32,9 +32,7 @@ int nand_bch_correct_data(struct mtd_inf
+ /*
+ * Initialize BCH encoder/decoder
+ */
+-struct nand_bch_control *
+-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
+- unsigned int eccbytes, struct nand_ecclayout **ecclayout);
++struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
+ /*
+ * Release BCH encoder/decoder resources
+ */
+@@ -55,12 +53,10 @@ static inline int
+ nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+ {
+- return -1;
++ return -ENOTSUPP;
+ }
+
+-static inline struct nand_bch_control *
+-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
+- unsigned int eccbytes, struct nand_ecclayout **ecclayout)
++static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
+ {
+ return NULL;
+ }
+--- a/include/linux/mtd/nftl.h
++++ b/include/linux/mtd/nftl.h
+@@ -50,7 +50,6 @@ struct NFTLrecord {
+ unsigned int nb_blocks; /* number of physical blocks */
+ unsigned int nb_boot_blocks; /* number of blocks used by the bios */
+ struct erase_info instr;
+- struct nand_ecclayout oobinfo;
+ };
+
+ int NFTL_mount(struct NFTLrecord *s);
+--- a/include/linux/mtd/onenand.h
++++ b/include/linux/mtd/onenand.h
+@@ -80,7 +80,6 @@ struct onenand_bufferram {
+ * @page_buf: [INTERN] page main data buffer
+ * @oob_buf: [INTERN] page oob data buffer
+ * @subpagesize: [INTERN] holds the subpagesize
+- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
+ * @bbm: [REPLACEABLE] pointer to Bad Block Management
+ * @priv: [OPTIONAL] pointer to private chip date
+ */
+@@ -134,7 +133,6 @@ struct onenand_chip {
+ #endif
+
+ int subpagesize;
+- struct nand_ecclayout *ecclayout;
+
+ void *bbm;
+
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -42,7 +42,6 @@ struct mtd_partition {
+ uint64_t size; /* partition size */
+ uint64_t offset; /* offset within the master MTD space */
+ uint32_t mask_flags; /* master MTD flags to mask out for this partition */
+- struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */
+ };
+
+ #define MTDPART_OFS_RETAIN (-3)
+@@ -56,11 +55,9 @@ struct device_node;
+ /**
+ * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+ * @origin: for RedBoot, start address of MTD device
+- * @of_node: for OF parsers, device node containing partitioning information
+ */
+ struct mtd_part_parser_data {
+ unsigned long origin;
+- struct device_node *of_node;
+ };
+
+
+@@ -78,14 +75,34 @@ struct mtd_part_parser {
+ struct list_head list;
+ struct module *owner;
+ const char *name;
+- int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
++ int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
+ struct mtd_part_parser_data *);
++ void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
+ enum mtd_parser_type type;
+ };
+
+-extern void register_mtd_parser(struct mtd_part_parser *parser);
++/* Container for passing around a set of parsed partitions */
++struct mtd_partitions {
++ const struct mtd_partition *parts;
++ int nr_parts;
++ const struct mtd_part_parser *parser;
++};
++
++extern int __register_mtd_parser(struct mtd_part_parser *parser,
++ struct module *owner);
++#define register_mtd_parser(parser) __register_mtd_parser(parser, THIS_MODULE)
++
+ extern void deregister_mtd_parser(struct mtd_part_parser *parser);
+
++/*
++ * module_mtd_part_parser() - Helper macro for MTD partition parsers that don't
++ * do anything special in module init/exit. Each driver may only use this macro
++ * once, and calling it replaces module_init() and module_exit().
++ */
++#define module_mtd_part_parser(__mtd_part_parser) \
++ module_driver(__mtd_part_parser, register_mtd_parser, \
++ deregister_mtd_parser)
++
+ int mtd_is_partition(const struct mtd_info *mtd);
+ int mtd_add_partition(struct mtd_info *master, const char *name,
+ long long offset, long long length);
+--- a/include/linux/mtd/sh_flctl.h
++++ b/include/linux/mtd/sh_flctl.h
+@@ -143,11 +143,11 @@ enum flctl_ecc_res_t {
+ struct dma_chan;
+
+ struct sh_flctl {
+- struct mtd_info mtd;
+ struct nand_chip chip;
+ struct platform_device *pdev;
+ struct dev_pm_qos_request pm_qos;
+ void __iomem *reg;
++ resource_size_t fifo;
+
+ uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
+ int read_bytes;
+@@ -186,7 +186,7 @@ struct sh_flctl_platform_data {
+
+ static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
+ {
+- return container_of(mtdinfo, struct sh_flctl, mtd);
++ return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip);
+ }
+
+ #endif /* __SH_FLCTL_H__ */
+--- a/include/linux/mtd/sharpsl.h
++++ b/include/linux/mtd/sharpsl.h
+@@ -14,7 +14,7 @@
+
+ struct sharpsl_nand_platform_data {
+ struct nand_bbt_descr *badblock_pattern;
+- struct nand_ecclayout *ecc_layout;
++ const struct mtd_ooblayout_ops *ecc_layout;
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+ };
+--- a/include/uapi/mtd/mtd-abi.h
++++ b/include/uapi/mtd/mtd-abi.h
+@@ -228,7 +228,7 @@ struct nand_oobfree {
+ * complete set of ECC information. The ioctl truncates the larger internal
+ * structure to retain binary compatibility with the static declaration of the
+ * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
+- * the user struct, not the MAX size of the internal struct nand_ecclayout.
++ * the user struct, not the MAX size of the internal OOB layout representation.
+ */
+ struct nand_ecclayout_user {
+ __u32 eccbytes;
+--- a/fs/jffs2/wbuf.c
++++ b/fs/jffs2/wbuf.c
+@@ -1153,7 +1153,7 @@ static struct jffs2_sb_info *work_to_sb(
+ {
+ struct delayed_work *dwork;
+
+- dwork = container_of(work, struct delayed_work, work);
++ dwork = to_delayed_work(work);
+ return container_of(dwork, struct jffs2_sb_info, wbuf_dwork);
+ }
+
+@@ -1183,22 +1183,20 @@ void jffs2_dirty_trigger(struct jffs2_sb
+
+ int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
+ {
+- struct nand_ecclayout *oinfo = c->mtd->ecclayout;
+-
+ if (!c->mtd->oobsize)
+ return 0;
+
+ /* Cleanmarker is out-of-band, so inline size zero */
+ c->cleanmarker_size = 0;
+
+- if (!oinfo || oinfo->oobavail == 0) {
++ if (c->mtd->oobavail == 0) {
+ pr_err("inconsistent device description\n");
+ return -EINVAL;
+ }
+
+ jffs2_dbg(1, "using OOB on NAND\n");
+
+- c->oobavail = oinfo->oobavail;
++ c->oobavail = c->mtd->oobavail;
+
+ /* Initialise write buffer */
+ init_rwsem(&c->wbuf_sem);
+--- a/include/linux/mtd/spi-nor.h
++++ b/include/linux/mtd/spi-nor.h
+@@ -85,6 +85,7 @@
+ #define SR_BP0 BIT(2) /* Block protect 0 */
+ #define SR_BP1 BIT(3) /* Block protect 1 */
+ #define SR_BP2 BIT(4) /* Block protect 2 */
++#define SR_TB BIT(5) /* Top/Bottom protect */
+ #define SR_SRWD BIT(7) /* SR write protect */
+
+ #define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */
+@@ -116,6 +117,7 @@ enum spi_nor_ops {
+
+ enum spi_nor_option_flags {
+ SNOR_F_USE_FSR = BIT(0),
++ SNOR_F_HAS_SR_TB = BIT(1),
+ };
+
+ /**
+@@ -123,7 +125,6 @@ enum spi_nor_option_flags {
+ * @mtd: point to a mtd_info structure
+ * @lock: the lock for the read/write/erase/lock/unlock operations
+ * @dev: point to a spi device, or a spi nor controller device.
+- * @flash_node: point to a device node describing this flash instance.
+ * @page_size: the page size of the SPI NOR
+ * @addr_width: number of address bytes
+ * @erase_opcode: the opcode for erasing a sector
+@@ -143,7 +144,8 @@ enum spi_nor_option_flags {
+ * @read: [DRIVER-SPECIFIC] read data from the SPI NOR
+ * @write: [DRIVER-SPECIFIC] write data to the SPI NOR
+ * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR
+- * at the offset @offs
++ * at the offset @offs; if not provided by the driver,
++ * spi-nor will send the erase opcode via write_reg()
+ * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR
+ * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
+ * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
+@@ -154,7 +156,6 @@ struct spi_nor {
+ struct mtd_info mtd;
+ struct mutex lock;
+ struct device *dev;
+- struct device_node *flash_node;
+ u32 page_size;
+ u8 addr_width;
+ u8 erase_opcode;
+@@ -184,6 +185,17 @@ struct spi_nor {
+ void *priv;
+ };
+
++static inline void spi_nor_set_flash_node(struct spi_nor *nor,
++ struct device_node *np)
++{
++ mtd_set_of_node(&nor->mtd, np);
++}
++
++static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
++{
++ return mtd_get_of_node(&nor->mtd);
++}
++
+ /**
+ * spi_nor_scan() - scan the SPI NOR
+ * @nor: the spi_nor structure
diff --git a/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch b/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch
new file mode 100644
index 0000000000..aa45441afa
--- /dev/null
+++ b/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch
@@ -0,0 +1,91 @@
+From 410a91f6efa1c4c3c4369d1dd2c31286749dff33 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 23 Mar 2016 11:19:01 +0100
+Subject: [PATCH 073/102] of: mtd: prepare helper reading NAND ECC algo from
+ DT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+NAND subsystem is being slightly reworked to store ECC details in
+separated fields. In future we'll want to add support for more DT
+properties as specifying every possible setup with a single
+"nand-ecc-mode" is a pretty bad idea.
+To allow this let's add a helper that will support something like
+"nand-ecc-algo" in future. Right now we use it for keeping backward
+compatibility.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
+---
+ drivers/of/of_mtd.c | 36 ++++++++++++++++++++++++++++++++++++
+ include/linux/of_mtd.h | 6 ++++++
+ 2 files changed, 42 insertions(+)
+
+--- a/drivers/of/of_mtd.c
++++ b/drivers/of/of_mtd.c
+@@ -50,6 +50,42 @@ int of_get_nand_ecc_mode(struct device_n
+ EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
+
+ /**
++ * of_get_nand_ecc_algo - Get nand ecc algorithm for given device_node
++ * @np: Pointer to the given device_node
++ *
++ * The function gets ecc algorithm and returns its enum value, or errno in error
++ * case.
++ */
++int of_get_nand_ecc_algo(struct device_node *np)
++{
++ const char *pm;
++ int err;
++
++ /*
++ * TODO: Read ECC algo OF property and map it to enum nand_ecc_algo.
++ * It's not implemented yet as currently NAND subsystem ignores
++ * algorithm explicitly set this way. Once it's handled we should
++ * document & support new property.
++ */
++
++ /*
++ * For backward compatibility we also read "nand-ecc-mode" checking
++ * for some obsoleted values that were specifying ECC algorithm.
++ */
++ err = of_property_read_string(np, "nand-ecc-mode", &pm);
++ if (err < 0)
++ return err;
++
++ if (!strcasecmp(pm, "soft"))
++ return NAND_ECC_HAMMING;
++ else if (!strcasecmp(pm, "soft_bch"))
++ return NAND_ECC_BCH;
++
++ return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(of_get_nand_ecc_algo);
++
++/**
+ * of_get_nand_ecc_step_size - Get ECC step size associated to
+ * the required ECC strength (see below).
+ * @np: Pointer to the given device_node
+--- a/include/linux/of_mtd.h
++++ b/include/linux/of_mtd.h
+@@ -13,6 +13,7 @@
+
+ #include <linux/of.h>
+ int of_get_nand_ecc_mode(struct device_node *np);
++int of_get_nand_ecc_algo(struct device_node *np);
+ int of_get_nand_ecc_step_size(struct device_node *np);
+ int of_get_nand_ecc_strength(struct device_node *np);
+ int of_get_nand_bus_width(struct device_node *np);
+@@ -24,6 +25,11 @@ static inline int of_get_nand_ecc_mode(s
+ {
+ return -ENOSYS;
+ }
++
++static inline int of_get_nand_ecc_algo(struct device_node *np)
++{
++ return -ENOSYS;
++}
+
+ static inline int of_get_nand_ecc_step_size(struct device_node *np)
+ {
diff --git a/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch b/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch
new file mode 100644
index 0000000000..6f1979b11b
--- /dev/null
+++ b/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch
@@ -0,0 +1,202 @@
+From d45bc58dd3bdcaabc1d7d8d9b0b8dee826635cc6 Mon Sep 17 00:00:00 2001
+From: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
+Date: Wed, 27 Jul 2016 11:23:52 +0200
+Subject: [PATCH] mtd: nand: import nand_hw_control_init()
+
+The code to initialize a struct nand_hw_control is duplicated across
+several drivers. Factorize it using an inline function.
+
+Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
+Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
+---
+ drivers/mtd/nand/bf5xx_nand.c | 3 +--
+ drivers/mtd/nand/brcmnand/brcmnand.c | 3 +--
+ drivers/mtd/nand/docg4.c | 3 +--
+ drivers/mtd/nand/fsl_elbc_nand.c | 3 +--
+ drivers/mtd/nand/fsl_ifc_nand.c | 3 +--
+ drivers/mtd/nand/jz4780_nand.c | 3 +--
+ drivers/mtd/nand/nand_base.c | 3 +--
+ drivers/mtd/nand/ndfc.c | 3 +--
+ drivers/mtd/nand/pxa3xx_nand.c | 3 +--
+ drivers/mtd/nand/qcom_nandc.c | 3 +--
+ drivers/mtd/nand/s3c2410.c | 3 +--
+ drivers/mtd/nand/sunxi_nand.c | 3 +--
+ drivers/mtd/nand/txx9ndfmc.c | 3 +--
+ include/linux/mtd/nand.h | 7 +++++++
+ 14 files changed, 20 insertions(+), 26 deletions(-)
+
+diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
+index 37da423..3962f55 100644
+--- a/drivers/mtd/nand/bf5xx_nand.c
++++ b/drivers/mtd/nand/bf5xx_nand.c
+@@ -761,8 +761,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
+
+ platform_set_drvdata(pdev, info);
+
+- spin_lock_init(&info->controller.lock);
+- init_waitqueue_head(&info->controller.wq);
++ nand_hw_control_init(&info->controller);
+
+ info->device = &pdev->dev;
+ info->platform = plat;
+diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
+index 8eb2c64..82ec36b 100644
+--- a/drivers/mtd/nand/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/brcmnand/brcmnand.c
+@@ -2370,8 +2370,7 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
+
+ init_completion(&ctrl->done);
+ init_completion(&ctrl->dma_done);
+- spin_lock_init(&ctrl->controller.lock);
+- init_waitqueue_head(&ctrl->controller.wq);
++ nand_hw_control_init(&ctrl->controller);
+ INIT_LIST_HEAD(&ctrl->host_list);
+
+ /* NAND register range */
+diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
+index 4731699..7af2a3c 100644
+--- a/drivers/mtd/nand/docg4.c
++++ b/drivers/mtd/nand/docg4.c
+@@ -1249,8 +1249,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
+ nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
+ nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
+ nand->controller = &nand->hwcontrol;
+- spin_lock_init(&nand->controller->lock);
+- init_waitqueue_head(&nand->controller->wq);
++ nand_hw_control_init(nand->controller);
+
+ /* methods */
+ nand->cmdfunc = docg4_command;
+diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
+index 60a88f2..113f76e 100644
+--- a/drivers/mtd/nand/fsl_elbc_nand.c
++++ b/drivers/mtd/nand/fsl_elbc_nand.c
+@@ -879,8 +879,7 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev)
+ }
+ elbc_fcm_ctrl->counter++;
+
+- spin_lock_init(&elbc_fcm_ctrl->controller.lock);
+- init_waitqueue_head(&elbc_fcm_ctrl->controller.wq);
++ nand_hw_control_init(&elbc_fcm_ctrl->controller);
+ fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl;
+ } else {
+ elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
+diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
+index 4e9e5fd..0a177b1 100644
+--- a/drivers/mtd/nand/fsl_ifc_nand.c
++++ b/drivers/mtd/nand/fsl_ifc_nand.c
+@@ -987,8 +987,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev)
+ ifc_nand_ctrl->addr = NULL;
+ fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl;
+
+- spin_lock_init(&ifc_nand_ctrl->controller.lock);
+- init_waitqueue_head(&ifc_nand_ctrl->controller.wq);
++ nand_hw_control_init(&ifc_nand_ctrl->controller);
+ } else {
+ ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand;
+ }
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 77533f7..53ea796 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -3191,8 +3191,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
+
+ if (!chip->controller) {
+ chip->controller = &chip->hwcontrol;
+- spin_lock_init(&chip->controller->lock);
+- init_waitqueue_head(&chip->controller->wq);
++ nand_hw_control_init(chip->controller);
+ }
+
+ }
+diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
+index 218c789..28e6118 100644
+--- a/drivers/mtd/nand/ndfc.c
++++ b/drivers/mtd/nand/ndfc.c
+@@ -218,8 +218,7 @@ static int ndfc_probe(struct platform_device *ofdev)
+ ndfc = &ndfc_ctrl[cs];
+ ndfc->chip_select = cs;
+
+- spin_lock_init(&ndfc->ndfc_control.lock);
+- init_waitqueue_head(&ndfc->ndfc_control.wq);
++ nand_hw_control_init(&ndfc->ndfc_control);
+ ndfc->ofdev = ofdev;
+ dev_set_drvdata(&ofdev->dev, ndfc);
+
+diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
+index 436dd6d..b121bf4 100644
+--- a/drivers/mtd/nand/pxa3xx_nand.c
++++ b/drivers/mtd/nand/pxa3xx_nand.c
+@@ -1810,8 +1810,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
+ chip->cmdfunc = nand_cmdfunc;
+ }
+
+- spin_lock_init(&chip->controller->lock);
+- init_waitqueue_head(&chip->controller->wq);
++ nand_hw_control_init(chip->controller);
+ info->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed to get nand clock\n");
+diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
+index d9309cf..b1734d7 100644
+--- a/drivers/mtd/nand/s3c2410.c
++++ b/drivers/mtd/nand/s3c2410.c
+@@ -977,8 +977,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
+
+ platform_set_drvdata(pdev, info);
+
+- spin_lock_init(&info->controller.lock);
+- init_waitqueue_head(&info->controller.wq);
++ nand_hw_control_init(&info->controller);
+
+ /* get the clock source and enable it */
+
+diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
+index e414b31..8b5dadc 100644
+--- a/drivers/mtd/nand/sunxi_nand.c
++++ b/drivers/mtd/nand/sunxi_nand.c
+@@ -2175,8 +2175,7 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
+ return -ENOMEM;
+
+ nfc->dev = dev;
+- spin_lock_init(&nfc->controller.lock);
+- init_waitqueue_head(&nfc->controller.wq);
++ nand_hw_control_init(&nfc->controller);
+ INIT_LIST_HEAD(&nfc->chips);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
+index 04d63f5..0a14fda 100644
+--- a/drivers/mtd/nand/txx9ndfmc.c
++++ b/drivers/mtd/nand/txx9ndfmc.c
+@@ -303,8 +303,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
+ dev_info(&dev->dev, "CLK:%ldMHz HOLD:%d SPW:%d\n",
+ (gbusclk + 500000) / 1000000, hold, spw);
+
+- spin_lock_init(&drvdata->hw_control.lock);
+- init_waitqueue_head(&drvdata->hw_control.wq);
++ nand_hw_control_init(&drvdata->hw_control);
+
+ platform_set_drvdata(dev, drvdata);
+ txx9ndfmc_initialize(dev);
+diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
+index 8dd6e01..f6a2d5e 100644
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -460,6 +460,13 @@ struct nand_hw_control {
+ wait_queue_head_t wq;
+ };
+
++static inline void nand_hw_control_init(struct nand_hw_control *nfc)
++{
++ nfc->active = NULL;
++ spin_lock_init(&nfc->lock);
++ init_waitqueue_head(&nfc->wq);
++}
++
+ /**
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode: ECC mode
+--
+2.10.2
+
diff --git a/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch b/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch
index 4e742786e0..053cd1db36 100644
--- a/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch
+++ b/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch
@@ -1,13 +1,12 @@
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
-@@ -546,4 +546,12 @@ config MTD_NAND_HISI504
+@@ -546,4 +546,11 @@ config MTD_NAND_HISI504
help
Enables support for NAND controller on Hisilicon SoC Hip04.
+config MTD_NAND_OXNAS
+ tristate "Support for NAND on Plxtech NAS782X SoC"
+ depends on ARCH_OXNAS
-+ select MTD_NAND_PLATFORM
+ help
+ Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached
+ to the STATIC Unit.