aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--include/image-commands.mk5
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network13
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom11
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata4
-rw-r--r--target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts216
-rw-r--r--target/linux/ath79/image/generic.mk12
-rw-r--r--target/linux/ramips/image/Makefile5
7 files changed, 257 insertions, 9 deletions
diff --git a/include/image-commands.mk b/include/image-commands.mk
index 143a042fa2..05c2300886 100644
--- a/include/image-commands.mk
+++ b/include/image-commands.mk
@@ -264,6 +264,11 @@ define Build/openmesh-image
"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef
+define Build/senao-header
+ $(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
+ mv $@.new $@
+endef
+
define Build/sysupgrade-tar
sh $(TOPDIR)/scripts/sysupgrade-tar.sh \
--board $(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)) \
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 5edfd9e2ce..fe2d5859d3 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -46,6 +46,11 @@ ath79_setup_interfaces()
glinet,ar300m)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
+ iodata,wn-ac1600dgr2|\
+ pcs,cr5000)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+ ;;
netgear,wndr3800)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
@@ -66,10 +71,6 @@ ath79_setup_interfaces()
"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
ucidef_set_interface_wan "eth0"
;;
- pcs,cr5000)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
- ;;
phicomm,k2t)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
@@ -152,6 +153,10 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_text "caldata" 65440)
wan_mac=$(mtd_get_mac_text "caldata" 65460)
;;
+ iodata,wn-ac1600dgr2)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ ;;
phicomm,k2t)
lan_mac=$(k2t_get_mac "lan_mac")
wan_mac=$(k2t_get_mac "wan_mac")
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 9577859548..29c11bbd5f 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -95,6 +95,17 @@ ath9k_patch_fw_mac_crc() {
board=$(board_name)
case "$FIRMWARE" in
+"ath9k-eeprom-ahb-18100000.wmac.bin")
+ case $board in
+ iodata,wn-ac1600dgr2)
+ ath9k_eeprom_extract "art" 4096 1088
+ ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
+ ;;
+ *)
+ ath9k_eeprom_die "board $board is not supported yet"
+ ;;
+ esac
+ ;;
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
avm,fritz300e)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 57d9744af2..d8254e3ff9 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -87,6 +87,10 @@ board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
+ iodata,wn-ac1600dgr2)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+ ;;
ocedo,koala)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_binary art 12)
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts
new file mode 100644
index 0000000000..54b5349fe4
--- /dev/null
+++ b/target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "iodata,wn-ac1600dgr2", "qca,qca9557";
+ model = "I-O DATA WN-AC1600DGR2";
+
+ aliases {
+ led-status = &power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "wn-ac1600dgr2:green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ copy {
+ label = "wn-ac1600dgr2:green:copy";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ eco {
+ label = "wn-ac1600dgr2:green:eco";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wlan5g {
+ label = "wn-ac1600dgr2:green:wlan5g";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan2g {
+ label = "wn-ac1600dgr2:green:wlan2g";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy1tpt";
+ };
+
+ notification {
+ label = "wn-ac1600dgr2:amber:notification";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ button_eco {
+ label = "eco";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+
+ button_copy {
+ label = "copy";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ router {
+ label = "router";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0xe50000>;
+ };
+
+ partition@e90000 {
+ label = "manufacture";
+ reg = <0xe90000 0x100000>;
+ read-only;
+ };
+
+ partition@f90000 {
+ label = "backup";
+ reg = <0xf90000 0x010000>;
+ read-only;
+ };
+
+ partition@fa0000 {
+ label = "storage";
+ reg = <0xfa0000 0x050000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+ phy-handle = <&phy0>;
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,003c";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 767d635cfb..a32136a40b 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -67,6 +67,18 @@ define Device/glinet_ar300m_nor
endef
TARGET_DEVICES += glinet_ar300m_nor
+define Device/iodata_wn-ac1600dgr2
+ ATH_SOC := qca9557
+ DEVICE_TITLE := I-O DATA WN-AC1600DGR2
+ IMAGE_SIZE := 14656k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
+ senao-header -r 0x30a -p 0x60 -t 2 -v 200
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
+endef
+TARGET_DEVICES += iodata_wn-ac1600dgr2
+
define Device/ocedo_koala
ATH_SOC := qca9558
DEVICE_TITLE := OCEDO Koala
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 753e287d73..5426226795 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -108,11 +108,6 @@ define Build/poray-header
mv $@.new $@
endef
-define Build/senao-header
- $(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
- mv $@.new $@
-endef
-
define Build/seama
$(STAGING_DIR_HOST)/bin/seama -i $@ $(1)
mv $@.seama $@