aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds9
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt10
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c227
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/tp-link.mk16
-rw-r--r--target/linux/ar71xx/mikrotik/config-default1
-rw-r--r--target/linux/ar71xx/nand/config-default1
14 files changed, 274 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index be6dfcc968..87f99ea9d8 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -54,6 +54,15 @@ sc1750|\
sc450)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
+archer-c25-v1)
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
+ ;;
archer-c59-v1|\
archer-c60-v1)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index b805487977..80355d6160 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -133,6 +133,7 @@ ar71xx_setup_interfaces()
a60|\
alfa-ap96|\
alfa-nx|\
+ archer-c25-v1|\
dr344|\
gl-ar150|\
gl-ar300m|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 369abde9d4..dce5d8e3cf 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -51,6 +51,7 @@ get_status_led() {
ap135-020)
status_led="ap135:green:status"
;;
+ archer-c25-v1|\
archer-c59-v1|\
archer-c60-v1|\
mr12|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index d4afbbcc25..6c83a2fba2 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -92,6 +92,7 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
+ archer-c25-v1|\
archer-c59-v1|\
archer-c60-v1|\
tl-wdr6500-v2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 5660d3eaa9..a1abfa047d 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -440,6 +440,9 @@ ar71xx_board_detect() {
*"AP90Q")
name="ap90q"
;;
+ *"Archer C25 v1")
+ name="archer-c25-v1"
+ ;;
*"Archer C5")
name="archer-c5"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index e14f8f3e49..4ee467180d 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -206,6 +206,7 @@ platform_check_image() {
ap132|\
ap531b0|\
ap90q|\
+ archer-c25-v1|\
archer-c59-v1|\
archer-c60-v1|\
bullet-m|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index df1108d904..6ac3a9ede3 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -51,6 +51,7 @@ CONFIG_ATH79_MACH_AP531B0=y
# CONFIG_ATH79_MACH_AP81 is not set
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C25_V1=y
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index ae64c6e92e..6182a6f47f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1318,6 +1318,16 @@ config ATH79_MACH_BSB
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C25_V1
+ bool "TP-LINK Archer C25 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C59_V1
bool "TP-LINK Archer C59 v1 support"
select SOC_QCA956X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index bf5515b4f3..5c22fafe51 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP531B0) += mach-ap531b0.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
new file mode 100644
index 0000000000..a0f001cb49
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
@@ -0,0 +1,227 @@
+/*
+ * TP-Link Archer C25 v1 board support
+ *
+ * Copyright (C) 2017 Ludwig Thomeczek <ledesrc@wxorx.net>
+ * based on mach-archer-c60/C59-v1.c
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */
+#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */
+#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */
+
+#define ARCHER_C25_74HC_GPIO_BASE QCA956X_GPIO_COUNT
+#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER 27
+#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN 28
+#define ARCHER_C25_74HC_GPIO_LED_WLAN2 29
+#define ARCHER_C25_74HC_GPIO_LED_WLAN5 30
+#define ARCHER_C25_74HC_GPIO_LED_LAN1 23
+#define ARCHER_C25_74HC_GPIO_LED_LAN2 24
+#define ARCHER_C25_74HC_GPIO_LED_LAN3 25
+#define ARCHER_C25_74HC_GPIO_LED_LAN4 26
+
+#define ARCHER_C25_V1_SSR_BIT_0 0
+#define ARCHER_C25_V1_SSR_BIT_1 1
+#define ARCHER_C25_V1_SSR_BIT_2 2
+#define ARCHER_C25_V1_SSR_BIT_3 3
+#define ARCHER_C25_V1_SSR_BIT_4 4
+#define ARCHER_C25_V1_SSR_BIT_5 5
+#define ARCHER_C25_V1_SSR_BIT_6 6
+#define ARCHER_C25_V1_SSR_BIT_7 7
+
+
+#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C25_V1_GPIO_BTN_RESET 1
+#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22
+
+#define ARCHER_C25_V1_GPIO_LED_POWER 17
+#define ARCHER_C25_V1_GPIO_LED_WPS 2
+
+#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000
+
+static struct spi_gpio_platform_data archer_c25_v1_spi_data = {
+ .sck = ARCHER_C25_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = ARCHER_C25_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 archer_c25_v1_ssr_initdata[] __initdata = {
+ BIT(ARCHER_C25_V1_SSR_BIT_7) |
+ BIT(ARCHER_C25_V1_SSR_BIT_6) |
+ BIT(ARCHER_C25_V1_SSR_BIT_5) |
+ BIT(ARCHER_C25_V1_SSR_BIT_4) |
+ BIT(ARCHER_C25_V1_SSR_BIT_3) |
+ BIT(ARCHER_C25_V1_SSR_BIT_2) |
+ BIT(ARCHER_C25_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = {
+ .base = ARCHER_C25_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata),
+ .init_data = archer_c25_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c25_v1_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &archer_c25_v1_spi_data,
+ },
+};
+
+static struct spi_board_info archer_c25_v1_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &archer_c25_v1_ssr_data,
+ .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK,
+ },
+};
+
+static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c25-v1:green:power",
+ .gpio = ARCHER_C25_V1_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wps",
+ .gpio = ARCHER_C25_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wlan2g",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wlan5g",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan1",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan2",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan3",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan4",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wan",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:amber:wan",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C25_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static void __init archer_c25_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+ ath79_register_m25p80(NULL);
+
+ spi_register_board_info(archer_c25_v1_spi_info,
+ ARRAY_SIZE(archer_c25_v1_spi_info));
+
+ platform_device_register(&archer_c25_v1_spi_device);
+
+ gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "LED control");
+
+ gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LED reset");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio),
+ archer_c25_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c25_v1_gpio_keys),
+ archer_c25_v1_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(NULL, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1",
+ archer_c25_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 46d250d47d..19d06c9834 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -40,6 +40,7 @@ enum ath79_mach_type {
ATH79_MACH_AP531B0, /* Rockeetech AP531B0 */
ATH79_MACH_AP90Q, /* YunCore AP90Q */
ATH79_MACH_AP96, /* Atheros AP96 */
+ ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index d9c7982e8c..c80b4ef71b 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -118,6 +118,22 @@ define Device/tplink-16mlzma
IMAGE_SIZE := 15872k
endef
+define Device/archer-c25-v1
+ DEVICE_TITLE := TP-LINK Archer C25 v1
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
+ BOARDNAME := ARCHER-C25-V1
+ TPLINK_BOARD_NAME := ARCHER-C25-V1
+ DEVICE_PROFILE := ARCHERC25V1
+ IMAGE_SIZE := 7808k
+ LOADER_TYPE := elf
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware)
+endef
+TARGET_DEVICES += archer-c25-v1
+
define Device/archer-c59-v1
DEVICE_TITLE := TP-LINK Archer C59 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 748252ce48..f00933bd87 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -16,6 +16,7 @@
# CONFIG_ATH79_MACH_AP531B0 is not set
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 7ae42fe8b9..41eacbf160 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -16,6 +16,7 @@
# CONFIG_ATH79_MACH_AP531B0 is not set
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set