diff options
12 files changed, 784 insertions, 28 deletions
diff --git a/target/linux/generic/patches-4.9/062-v4.11-0001-mtd-spi-nor-Add-support-for-S3AN-spi-nor-devices.patch b/target/linux/generic/patches-4.9/062-v4.11-0001-mtd-spi-nor-Add-support-for-S3AN-spi-nor-devices.patch new file mode 100644 index 0000000000..df36f6b036 --- /dev/null +++ b/target/linux/generic/patches-4.9/062-v4.11-0001-mtd-spi-nor-Add-support-for-S3AN-spi-nor-devices.patch @@ -0,0 +1,312 @@ +From 61cba34bd6c1bddfc38f94cc3f80bdfefcc3393b Mon Sep 17 00:00:00 2001 +From: Ricardo Ribalda <ricardo.ribalda@gmail.com> +Date: Fri, 2 Dec 2016 12:31:44 +0100 +Subject: [PATCH] mtd: spi-nor: Add support for S3AN spi-nor devices + +Xilinx Spartan-3AN FPGAs contain an In-System Flash where they keep +their configuration data and (optionally) some user data. + +The protocol of this flash follows most of the spi-nor standard. With +the following differences: + +- Page size might not be a power of two. +- The address calculation (default addressing mode). +- The spi nor commands used. + +Protocol is described on Xilinx User Guide UG333 + +Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> +Cc: Boris Brezillon <boris.brezillon@free-electrons.com> +Cc: Brian Norris <computersforpeace@gmail.com> +Cc: Marek Vasut <marek.vasut@gmail.com> +Reviewed-by: Marek Vasut <marek.vasut@gmail.com> +Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> +--- + drivers/mtd/spi-nor/spi-nor.c | 154 ++++++++++++++++++++++++++++++++++++++++-- + include/linux/mtd/spi-nor.h | 12 ++++ + 2 files changed, 161 insertions(+), 5 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -75,6 +75,12 @@ struct flash_info { + * bit. Must be used with + * SPI_NOR_HAS_LOCK. + */ ++#define SPI_S3AN BIT(10) /* ++ * Xilinx Spartan 3AN In-System Flash ++ * (MFR cannot be used for probing ++ * because it has the same value as ++ * ATMEL flashes) ++ */ + }; + + #define JEDEC_MFR(info) ((info)->id[0]) +@@ -217,6 +223,21 @@ static inline int set_4byte(struct spi_n + return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1); + } + } ++ ++static int s3an_sr_ready(struct spi_nor *nor) ++{ ++ int ret; ++ u8 val; ++ ++ ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); ++ if (ret < 0) { ++ dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); ++ return ret; ++ } ++ ++ return !!(val & XSR_RDY); ++} ++ + static inline int spi_nor_sr_ready(struct spi_nor *nor) + { + int sr = read_sr(nor); +@@ -238,7 +259,11 @@ static inline int spi_nor_fsr_ready(stru + static int spi_nor_ready(struct spi_nor *nor) + { + int sr, fsr; +- sr = spi_nor_sr_ready(nor); ++ ++ if (nor->flags & SNOR_F_READY_XSR_RDY) ++ sr = s3an_sr_ready(nor); ++ else ++ sr = spi_nor_sr_ready(nor); + if (sr < 0) + return sr; + fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1; +@@ -320,6 +345,24 @@ static void spi_nor_unlock_and_unprep(st + } + + /* ++ * This code converts an address to the Default Address Mode, that has non ++ * power of two page sizes. We must support this mode because it is the default ++ * mode supported by Xilinx tools, it can access the whole flash area and ++ * changing over to the Power-of-two mode is irreversible and corrupts the ++ * original data. ++ * Addr can safely be unsigned int, the biggest S3AN device is smaller than ++ * 4 MiB. ++ */ ++static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr) ++{ ++ unsigned int offset = addr; ++ ++ offset %= nor->page_size; ++ ++ return ((addr - offset) << 1) | offset; ++} ++ ++/* + * Initiate the erasure of a single sector + */ + static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) +@@ -327,6 +370,9 @@ static int spi_nor_erase_sector(struct s + u8 buf[SPI_NOR_MAX_ADDR_WIDTH]; + int i; + ++ if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) ++ addr = spi_nor_s3an_addr_convert(nor, addr); ++ + if (nor->erase) + return nor->erase(nor, addr); + +@@ -368,7 +414,7 @@ static int spi_nor_erase(struct mtd_info + return ret; + + /* whole-chip erase? */ +- if (len == mtd->size) { ++ if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) { + unsigned long timeout; + + write_enable(nor); +@@ -782,6 +828,19 @@ static int spi_nor_is_locked(struct mtd_ + .addr_width = (_addr_width), \ + .flags = (_flags), + ++#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \ ++ .id = { \ ++ ((_jedec_id) >> 16) & 0xff, \ ++ ((_jedec_id) >> 8) & 0xff, \ ++ (_jedec_id) & 0xff \ ++ }, \ ++ .id_len = 3, \ ++ .sector_size = (8*_page_size), \ ++ .n_sectors = (_n_sectors), \ ++ .page_size = _page_size, \ ++ .addr_width = 3, \ ++ .flags = SPI_NOR_NO_FR | SPI_S3AN, ++ + /* NOTE: double check command sets and memory organization when you add + * more nor chips. This current list focusses on newer chips, which + * have been converging on command sets which including JEDEC ID. +@@ -1014,6 +1073,13 @@ static const struct flash_info spi_nor_i + { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, ++ ++ /* Xilinx S3AN Internal Flash */ ++ { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) }, ++ { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) }, ++ { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) }, ++ { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) }, ++ { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) }, + { }, + }; + +@@ -1054,7 +1120,12 @@ static int spi_nor_read(struct mtd_info + return ret; + + while (len) { +- ret = nor->read(nor, from, len, buf); ++ loff_t addr = from; ++ ++ if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) ++ addr = spi_nor_s3an_addr_convert(nor, addr); ++ ++ ret = nor->read(nor, addr, len, buf); + if (ret == 0) { + /* We shouldn't see 0-length reads */ + ret = -EIO; +@@ -1175,8 +1246,23 @@ static int spi_nor_write(struct mtd_info + + for (i = 0; i < len; ) { + ssize_t written; ++ loff_t addr = to + i; + +- page_offset = (to + i) & (nor->page_size - 1); ++ /* ++ * If page_size is a power of two, the offset can be quickly ++ * calculated with an AND operation. On the other cases we ++ * need to do a modulus operation (more expensive). ++ * Power of two numbers have only one bit set and we can use ++ * the instruction hweight32 to detect if we need to do a ++ * modulus (do_div()) or not. ++ */ ++ if (hweight32(nor->page_size) == 1) { ++ page_offset = addr & (nor->page_size - 1); ++ } else { ++ uint64_t aux = addr; ++ ++ page_offset = do_div(aux, nor->page_size); ++ } + WARN_ONCE(page_offset, + "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.", + page_offset); +@@ -1184,8 +1270,11 @@ static int spi_nor_write(struct mtd_info + page_remain = min_t(size_t, + nor->page_size - page_offset, len - i); + ++ if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) ++ addr = spi_nor_s3an_addr_convert(nor, addr); ++ + write_enable(nor); +- ret = nor->write(nor, to + i, page_remain, buf + i); ++ ret = nor->write(nor, addr, page_remain, buf + i); + if (ret < 0) + goto write_err; + written = ret; +@@ -1312,6 +1401,47 @@ static int spi_nor_check(struct spi_nor + return 0; + } + ++static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor) ++{ ++ int ret; ++ u8 val; ++ ++ ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); ++ if (ret < 0) { ++ dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); ++ return ret; ++ } ++ ++ nor->erase_opcode = SPINOR_OP_XSE; ++ nor->program_opcode = SPINOR_OP_XPP; ++ nor->read_opcode = SPINOR_OP_READ; ++ nor->flags |= SNOR_F_NO_OP_CHIP_ERASE; ++ ++ /* ++ * This flashes have a page size of 264 or 528 bytes (known as ++ * Default addressing mode). It can be changed to a more standard ++ * Power of two mode where the page size is 256/512. This comes ++ * with a price: there is 3% less of space, the data is corrupted ++ * and the page size cannot be changed back to default addressing ++ * mode. ++ * ++ * The current addressing mode can be read from the XRDSR register ++ * and should not be changed, because is a destructive operation. ++ */ ++ if (val & XSR_PAGESIZE) { ++ /* Flash in Power of 2 mode */ ++ nor->page_size = (nor->page_size == 264) ? 256 : 512; ++ nor->mtd.writebufsize = nor->page_size; ++ nor->mtd.size = 8 * nor->page_size * info->n_sectors; ++ nor->mtd.erasesize = 8 * nor->page_size; ++ } else { ++ /* Flash in Default addressing mode */ ++ nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT; ++ } ++ ++ return 0; ++} ++ + int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) + { + const struct flash_info *info = NULL; +@@ -1360,6 +1490,14 @@ int spi_nor_scan(struct spi_nor *nor, co + mutex_init(&nor->lock); + + /* ++ * Make sure the XSR_RDY flag is set before calling ++ * spi_nor_wait_till_ready(). Xilinx S3AN share MFR ++ * with Atmel spi-nor ++ */ ++ if (info->flags & SPI_S3AN) ++ nor->flags |= SNOR_F_READY_XSR_RDY; ++ ++ /* + * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up + * with the software protection bits set + */ +@@ -1517,6 +1655,12 @@ int spi_nor_scan(struct spi_nor *nor, co + + nor->read_dummy = spi_nor_read_dummy_cycles(nor); + ++ if (info->flags & SPI_S3AN) { ++ ret = s3an_nor_scan(info, nor); ++ if (ret) ++ return ret; ++ } ++ + dev_info(dev, "%s (%lld Kbytes)\n", info->name, + (long long)mtd->size >> 10); + +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -68,6 +68,15 @@ + #define SPINOR_OP_WRDI 0x04 /* Write disable */ + #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */ + ++/* Used for S3AN flashes only */ ++#define SPINOR_OP_XSE 0x50 /* Sector erase */ ++#define SPINOR_OP_XPP 0x82 /* Page program */ ++#define SPINOR_OP_XRDSR 0xd7 /* Read status register */ ++ ++#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */ ++#define XSR_RDY BIT(7) /* Ready */ ++ ++ + /* Used for Macronix and Winbond flashes. */ + #define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */ + #define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */ +@@ -119,6 +128,9 @@ enum spi_nor_ops { + enum spi_nor_option_flags { + SNOR_F_USE_FSR = BIT(0), + SNOR_F_HAS_SR_TB = BIT(1), ++ SNOR_F_NO_OP_CHIP_ERASE = BIT(2), ++ SNOR_F_S3AN_ADDR_DEFAULT = BIT(3), ++ SNOR_F_READY_XSR_RDY = BIT(4), + }; + + /** diff --git a/target/linux/generic/patches-4.9/062-v4.11-0002-mtd-spi-nor-improve-macronix_quad_enable.patch b/target/linux/generic/patches-4.9/062-v4.11-0002-mtd-spi-nor-improve-macronix_quad_enable.patch new file mode 100644 index 0000000000..bdd5e344d7 --- /dev/null +++ b/target/linux/generic/patches-4.9/062-v4.11-0002-mtd-spi-nor-improve-macronix_quad_enable.patch @@ -0,0 +1,28 @@ +From 1e99d0d51ec97bf48edd277658004ce030543d98 Mon Sep 17 00:00:00 2001 +From: Cyrille Pitchen <cyrille.pitchen@atmel.com> +Date: Tue, 6 Dec 2016 17:01:41 +0100 +Subject: [PATCH] mtd: spi-nor: improve macronix_quad_enable() + +The patch checks whether the Quad Enable bit is already set in the Status +Register. If so, the function exits immediately with a successful return +code. + +Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> +Reviewed-by: Jagan Teki <jagan@openedev.com> +Acked-by: Marek Vasut <marek.vasut@gmail.com> +--- + drivers/mtd/spi-nor/spi-nor.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1305,6 +1305,9 @@ static int macronix_quad_enable(struct s + val = read_sr(nor); + if (val < 0) + return val; ++ if (val & SR_QUAD_EN_MX) ++ return 0; ++ + write_enable(nor); + + write_sr(nor, val | SR_QUAD_EN_MX); diff --git a/target/linux/generic/patches-4.9/062-v4.11-0003-mtd-spi-nor-remove-WARN_ONCE-message-in-spi_nor_writ.patch b/target/linux/generic/patches-4.9/062-v4.11-0003-mtd-spi-nor-remove-WARN_ONCE-message-in-spi_nor_writ.patch new file mode 100644 index 0000000000..731ef21bb8 --- /dev/null +++ b/target/linux/generic/patches-4.9/062-v4.11-0003-mtd-spi-nor-remove-WARN_ONCE-message-in-spi_nor_writ.patch @@ -0,0 +1,33 @@ +From dc176595bf184e89bf28fdf91cbc1d050dfe63b3 Mon Sep 17 00:00:00 2001 +From: Cyrille Pitchen <cyrille.pitchen@atmel.com> +Date: Tue, 6 Dec 2016 18:14:24 +0100 +Subject: [PATCH] mtd: spi-nor: remove WARN_ONCE() message in spi_nor_write() + +This patch removes the WARN_ONCE() test in spi_nor_write(). +This macro triggers the display of a warning message almost every time we +use a UBI file-system because a write operation is performed at offset 64, +which is in the middle of the SPI NOR memory page. This is a valid +operation for ubifs. + +Hence this warning is pretty annoying and useless so we just remove it. + +Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> +Suggested-by: Richard Weinberger <richard@nod.at> +Suggested-by: Andras Szemzo <szemzo.andras@gmail.com> +Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> +--- + drivers/mtd/spi-nor/spi-nor.c | 3 --- + 1 file changed, 3 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1263,9 +1263,6 @@ static int spi_nor_write(struct mtd_info + + page_offset = do_div(aux, nor->page_size); + } +- WARN_ONCE(page_offset, +- "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.", +- page_offset); + /* the size of data remaining on the first page */ + page_remain = min_t(size_t, + nor->page_size - page_offset, len - i); diff --git a/target/linux/generic/patches-4.9/062-v4.11-0004-mtd-spi-nor-rename-SPINOR_OP_-macros-of-the-4-byte-a.patch b/target/linux/generic/patches-4.9/062-v4.11-0004-mtd-spi-nor-rename-SPINOR_OP_-macros-of-the-4-byte-a.patch new file mode 100644 index 0000000000..9bdce0493e --- /dev/null +++ b/target/linux/generic/patches-4.9/062-v4.11-0004-mtd-spi-nor-rename-SPINOR_OP_-macros-of-the-4-byte-a.patch @@ -0,0 +1,187 @@ +From 05aba5763dcf35eddc58aaf99c9f16d19730e0a8 Mon Sep 17 00:00:00 2001 +From: Cyrille Pitchen <cyrille.pitchen@atmel.com> +Date: Thu, 27 Oct 2016 11:55:39 +0200 +Subject: [PATCH] mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address + op codes + +This patch renames the SPINOR_OP_* macros of the 4-byte address +instruction set so the new names all share a common pattern: the 4-byte +address name is built from the 3-byte address name appending the "_4B" +suffix. + +The patch also introduces new op codes to support other SPI protocols such +as SPI 1-4-4 and SPI 1-2-2. + +This is a transitional patch and will help a later patch of spi-nor.c +to automate the translation from the 3-byte address op codes into their +4-byte address version. + +Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> +Acked-by: Mark Brown <broonie@kernel.org> +Acked-by: Marek Vasut <marek.vasut@gmail.com> +--- + drivers/mtd/devices/serial_flash_cmds.h | 7 ------- + drivers/mtd/devices/st_spi_fsm.c | 28 ++++++++++++++-------------- + drivers/mtd/spi-nor/spi-nor.c | 8 ++++---- + drivers/spi/spi-bcm-qspi.c | 6 +++--- + include/linux/mtd/spi-nor.h | 22 ++++++++++++++++------ + 5 files changed, 37 insertions(+), 34 deletions(-) + +--- a/drivers/mtd/devices/serial_flash_cmds.h ++++ b/drivers/mtd/devices/serial_flash_cmds.h +@@ -18,19 +18,12 @@ + #define SPINOR_OP_RDVCR 0x85 + + /* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */ +-#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */ +-#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */ +- + #define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */ + #define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ + #define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ + #define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ + #define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ + +-/* READ commands with 32-bit addressing */ +-#define SPINOR_OP_READ4_1_2_2 0xbc +-#define SPINOR_OP_READ4_1_4_4 0xec +- + /* Configuration flags */ + #define FLASH_FLAG_SINGLE 0x000000ff + #define FLASH_FLAG_READ_WRITE 0x00000001 +--- a/drivers/mtd/devices/st_spi_fsm.c ++++ b/drivers/mtd/devices/st_spi_fsm.c +@@ -507,13 +507,13 @@ static struct seq_rw_config n25q_read3_c + * - 'FAST' variants configured for 8 dummy cycles (see note above.) + */ + static struct seq_rw_config n25q_read4_configs[] = { +- {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8}, +- {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, +- {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8}, +- {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, +- {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, +- {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, +- {0x00, 0, 0, 0, 0, 0x00, 0, 0}, ++ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 0, 8}, ++ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8}, ++ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 0, 8}, ++ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8}, ++ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8}, ++ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0}, ++ {0x00, 0, 0, 0, 0, 0x00, 0, 0}, + }; + + /* +@@ -553,13 +553,13 @@ static int stfsm_mx25_en_32bit_addr_seq( + * entering a state that is incompatible with the SPIBoot Controller. + */ + static struct seq_rw_config stfsm_s25fl_read4_configs[] = { +- {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4}, +- {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, +- {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0}, +- {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, +- {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, +- {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, +- {0x00, 0, 0, 0, 0, 0x00, 0, 0}, ++ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 2, 4}, ++ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8}, ++ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 4, 0}, ++ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8}, ++ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8}, ++ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0}, ++ {0x00, 0, 0, 0, 0, 0x00, 0, 0}, + }; + + static struct seq_rw_config stfsm_s25fl_write4_configs[] = { +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1625,16 +1625,16 @@ int spi_nor_scan(struct spi_nor *nor, co + /* Dedicated 4-byte command set */ + switch (nor->flash_read) { + case SPI_NOR_QUAD: +- nor->read_opcode = SPINOR_OP_READ4_1_1_4; ++ nor->read_opcode = SPINOR_OP_READ_1_1_4_4B; + break; + case SPI_NOR_DUAL: +- nor->read_opcode = SPINOR_OP_READ4_1_1_2; ++ nor->read_opcode = SPINOR_OP_READ_1_1_2_4B; + break; + case SPI_NOR_FAST: +- nor->read_opcode = SPINOR_OP_READ4_FAST; ++ nor->read_opcode = SPINOR_OP_READ_FAST_4B; + break; + case SPI_NOR_NORMAL: +- nor->read_opcode = SPINOR_OP_READ4; ++ nor->read_opcode = SPINOR_OP_READ_4B; + break; + } + nor->program_opcode = SPINOR_OP_PP_4B; +--- a/drivers/spi/spi-bcm-qspi.c ++++ b/drivers/spi/spi-bcm-qspi.c +@@ -371,7 +371,7 @@ static int bcm_qspi_bspi_set_flex_mode(s + /* default mode, does not need flex_cmd */ + flex_mode = 0; + else +- command = SPINOR_OP_READ4_FAST; ++ command = SPINOR_OP_READ_FAST_4B; + break; + case SPI_NBITS_DUAL: + bpc = 0x00000001; +@@ -384,7 +384,7 @@ static int bcm_qspi_bspi_set_flex_mode(s + } else { + command = SPINOR_OP_READ_1_1_2; + if (spans_4byte) +- command = SPINOR_OP_READ4_1_1_2; ++ command = SPINOR_OP_READ_1_1_2_4B; + } + break; + case SPI_NBITS_QUAD: +@@ -399,7 +399,7 @@ static int bcm_qspi_bspi_set_flex_mode(s + } else { + command = SPINOR_OP_READ_1_1_4; + if (spans_4byte) +- command = SPINOR_OP_READ4_1_1_4; ++ command = SPINOR_OP_READ_1_1_4_4B; + } + break; + default: +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -43,9 +43,13 @@ + #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ + #define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */ + #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ +-#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */ +-#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */ ++#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */ ++#define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */ ++#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad Output SPI) */ ++#define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O SPI) */ + #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */ ++#define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */ ++#define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */ + #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */ + #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ + #define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */ +@@ -56,11 +60,17 @@ + #define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ + + /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ +-#define SPINOR_OP_READ4 0x13 /* Read data bytes (low frequency) */ +-#define SPINOR_OP_READ4_FAST 0x0c /* Read data bytes (high frequency) */ +-#define SPINOR_OP_READ4_1_1_2 0x3c /* Read data bytes (Dual SPI) */ +-#define SPINOR_OP_READ4_1_1_4 0x6c /* Read data bytes (Quad SPI) */ ++#define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */ ++#define SPINOR_OP_READ_FAST_4B 0x0c /* Read data bytes (high frequency) */ ++#define SPINOR_OP_READ_1_1_2_4B 0x3c /* Read data bytes (Dual Output SPI) */ ++#define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O SPI) */ ++#define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad Output SPI) */ ++#define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O SPI) */ + #define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */ ++#define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */ ++#define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */ ++#define SPINOR_OP_BE_4K_4B 0x21 /* Erase 4KiB block */ ++#define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */ + #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */ + + /* Used for SST flashes only. */ diff --git a/target/linux/generic/patches-4.9/062-v4.11-0005-mtd-spi-nor-add-a-stateless-method-to-support-memory.patch b/target/linux/generic/patches-4.9/062-v4.11-0005-mtd-spi-nor-add-a-stateless-method-to-support-memory.patch new file mode 100644 index 0000000000..8e994e61be --- /dev/null +++ b/target/linux/generic/patches-4.9/062-v4.11-0005-mtd-spi-nor-add-a-stateless-method-to-support-memory.patch @@ -0,0 +1,150 @@ +From 3274ba26f27becfc4193ec6e229288140651f240 Mon Sep 17 00:00:00 2001 +From: Cyrille Pitchen <cyrille.pitchen@atmel.com> +Date: Thu, 27 Oct 2016 12:03:57 +0200 +Subject: [PATCH] mtd: spi-nor: add a stateless method to support memory size + above 128Mib + +This patch provides an alternative mean to support memory above 16MiB +(128Mib) by replacing 3byte address op codes by their associated 4byte +address versions. + +Using the dedicated 4byte address op codes doesn't change the internal +state of the SPI NOR memory as opposed to using other means such as +updating a Base Address Register (BAR) and sending command to enter/leave +the 4byte mode. + +Hence when a CPU reset occurs, early bootloaders don't need to be aware +of BAR value or 4byte mode being enabled: they can still access the first +16MiB of the SPI NOR memory using the regular 3byte address op codes. + +Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> +Tested-by: Vignesh R <vigneshr@ti.com> +Acked-by: Marek Vasut <marek.vasut@gmail.com> +--- + drivers/mtd/spi-nor/spi-nor.c | 101 +++++++++++++++++++++++++++++++++--------- + 1 file changed, 80 insertions(+), 21 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -81,6 +81,10 @@ struct flash_info { + * because it has the same value as + * ATMEL flashes) + */ ++#define SPI_NOR_4B_OPCODES BIT(11) /* ++ * Use dedicated 4byte address op codes ++ * to support memory size above 128Mib. ++ */ + }; + + #define JEDEC_MFR(info) ((info)->id[0]) +@@ -194,6 +198,78 @@ static inline struct spi_nor *mtd_to_spi + return mtd->priv; + } + ++ ++static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size) ++{ ++ size_t i; ++ ++ for (i = 0; i < size; i++) ++ if (table[i][0] == opcode) ++ return table[i][1]; ++ ++ /* No conversion found, keep input op code. */ ++ return opcode; ++} ++ ++static inline u8 spi_nor_convert_3to4_read(u8 opcode) ++{ ++ static const u8 spi_nor_3to4_read[][2] = { ++ { SPINOR_OP_READ, SPINOR_OP_READ_4B }, ++ { SPINOR_OP_READ_FAST, SPINOR_OP_READ_FAST_4B }, ++ { SPINOR_OP_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B }, ++ { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B }, ++ { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B }, ++ { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B }, ++ }; ++ ++ return spi_nor_convert_opcode(opcode, spi_nor_3to4_read, ++ ARRAY_SIZE(spi_nor_3to4_read)); ++} ++ ++static inline u8 spi_nor_convert_3to4_program(u8 opcode) ++{ ++ static const u8 spi_nor_3to4_program[][2] = { ++ { SPINOR_OP_PP, SPINOR_OP_PP_4B }, ++ { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B }, ++ { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B }, ++ }; ++ ++ return spi_nor_convert_opcode(opcode, spi_nor_3to4_program, ++ ARRAY_SIZE(spi_nor_3to4_program)); ++} ++ ++static inline u8 spi_nor_convert_3to4_erase(u8 opcode) ++{ ++ static const u8 spi_nor_3to4_erase[][2] = { ++ { SPINOR_OP_BE_4K, SPINOR_OP_BE_4K_4B }, ++ { SPINOR_OP_BE_32K, SPINOR_OP_BE_32K_4B }, ++ { SPINOR_OP_SE, SPINOR_OP_SE_4B }, ++ }; ++ ++ return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase, ++ ARRAY_SIZE(spi_nor_3to4_erase)); ++} ++ ++static void spi_nor_set_4byte_opcodes(struct spi_nor *nor, ++ const struct flash_info *info) ++{ ++ /* Do some manufacturer fixups first */ ++ switch (JEDEC_MFR(info)) { ++ case SNOR_MFR_SPANSION: ++ /* No small sector erase for 4-byte command set */ ++ nor->erase_opcode = SPINOR_OP_SE; ++ nor->mtd.erasesize = info->sector_size; ++ break; ++ ++ default: ++ break; ++ } ++ ++ nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode); ++ nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode); ++ nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode); ++} ++ + /* Enable/disable 4-byte addressing mode. */ + static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, + int enable) +@@ -1621,27 +1697,10 @@ int spi_nor_scan(struct spi_nor *nor, co + else if (mtd->size > 0x1000000) { + /* enable 4-byte addressing if the device exceeds 16MiB */ + nor->addr_width = 4; +- if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) { +- /* Dedicated 4-byte command set */ +- switch (nor->flash_read) { +- case SPI_NOR_QUAD: +- nor->read_opcode = SPINOR_OP_READ_1_1_4_4B; +- break; +- case SPI_NOR_DUAL: +- nor->read_opcode = SPINOR_OP_READ_1_1_2_4B; +- break; +- case SPI_NOR_FAST: +- nor->read_opcode = SPINOR_OP_READ_FAST_4B; +- break; +- case SPI_NOR_NORMAL: +- nor->read_opcode = SPINOR_OP_READ_4B; +- break; +- } +- nor->program_opcode = SPINOR_OP_PP_4B; +- /* No small sector erase for 4-byte command set */ +- nor->erase_opcode = SPINOR_OP_SE_4B; +- mtd->erasesize = info->sector_size; +- } else ++ if (JEDEC_MFR(info) == SNOR_MFR_SPANSION || ++ info->flags & SPI_NOR_4B_OPCODES) ++ spi_nor_set_4byte_opcodes(nor, info); ++ else + set_4byte(nor, info, 1); + } else { + nor->addr_width = 3; diff --git a/target/linux/generic/patches-4.9/479-enable_mtd_has_lock_for_f25l32pa.patch b/target/linux/generic/patches-4.9/062-v4.11-0006-mtd-spi-nor-Add-lock-unlock-support-for-f25l32pa.patch index 354eac0720..be78682193 100644 --- a/target/linux/generic/patches-4.9/479-enable_mtd_has_lock_for_f25l32pa.patch +++ b/target/linux/generic/patches-4.9/062-v4.11-0006-mtd-spi-nor-Add-lock-unlock-support-for-f25l32pa.patch @@ -1,22 +1,26 @@ -mtd: spi-nor: Add lock/unlock support for f25l32pa +From 252c36bb9c7b98b356f033d16ea83d20fb8b4d3e Mon Sep 17 00:00:00 2001 +From: Victor Shyba <victor1984@riseup.net> +Date: Mon, 2 Jan 2017 22:34:30 -0300 +Subject: [PATCH] mtd: spi-nor: Add lock/unlock support for f25l32pa This chip has write protection enabled on power-up, so this flag is necessary to support write operations. Signed-off-by: Victor Shyba <victor1984@riseup.net> Acked-by: Marek Vasut <marek.vasut@gmail.com> +Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> --- drivers/mtd/spi-nor/spi-nor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -822,7 +822,7 @@ static const struct flash_info spi_nor_i +@@ -956,7 +956,7 @@ static const struct flash_info spi_nor_i { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) }, /* ESMT */ - { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, + { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) }, - { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, SECT_4K) }, - { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K) }, + /* Everspin */ + { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, diff --git a/target/linux/generic/patches-4.9/062-v4.11-0007-mtd-spi-nor-Fix-S3AN-addressing-calculation.patch b/target/linux/generic/patches-4.9/062-v4.11-0007-mtd-spi-nor-Fix-S3AN-addressing-calculation.patch new file mode 100644 index 0000000000..f8d0541428 --- /dev/null +++ b/target/linux/generic/patches-4.9/062-v4.11-0007-mtd-spi-nor-Fix-S3AN-addressing-calculation.patch @@ -0,0 +1,35 @@ +From 5f0e0758efddef5b06994a76d8c7f0b8a4c1daae Mon Sep 17 00:00:00 2001 +From: Ricardo Ribalda <ricardo.ribalda@gmail.com> +Date: Wed, 18 Jan 2017 17:40:16 +0100 +Subject: [PATCH] mtd: spi-nor: Fix S3AN addressing calculation + +The page calculation under spi_nor_s3an_addr_convert() was wrong. On +Default Address Mode we need to perform a divide by page_size. + +Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> +Acked-by: Marek Vasut <marek.vasut@gmail.com> +Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> +--- + drivers/mtd/spi-nor/spi-nor.c | 9 ++++++--- + 1 file changed, 6 insertions(+), 3 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -431,11 +431,14 @@ static void spi_nor_unlock_and_unprep(st + */ + static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr) + { +- unsigned int offset = addr; ++ unsigned int offset; ++ unsigned int page; + +- offset %= nor->page_size; ++ offset = addr % nor->page_size; ++ page = addr / nor->page_size; ++ page <<= (nor->page_size > 512) ? 10 : 9; + +- return ((addr - offset) << 1) | offset; ++ return page | offset; + } + + /* diff --git a/target/linux/generic/patches-4.9/062-v4.11-0008-mtd-spi-nor-Add-support-for-gd25q16.patch b/target/linux/generic/patches-4.9/062-v4.11-0008-mtd-spi-nor-Add-support-for-gd25q16.patch new file mode 100644 index 0000000000..5253957286 --- /dev/null +++ b/target/linux/generic/patches-4.9/062-v4.11-0008-mtd-spi-nor-Add-support-for-gd25q16.patch @@ -0,0 +1,28 @@ +From 4c5747a390acc9d1da3b332507c8bae7a8ddfc48 Mon Sep 17 00:00:00 2001 +From: Kamal Dasu <kdasu.kdev@gmail.com> +Date: Fri, 20 Jan 2017 14:25:51 -0500 +Subject: [PATCH] mtd: spi-nor: Add support for gd25q16 + +Add GigaDevice GD25Q16 (16M-bit) to supported list. + +Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> +Acked-by: Marek Vasut <marek.vasut@gmail.com> +Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> +--- + drivers/mtd/spi-nor/spi-nor.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -971,6 +971,11 @@ static const struct flash_info spi_nor_i + + /* GigaDevice */ + { ++ "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | ++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) ++ }, ++ { + "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) diff --git a/target/linux/generic/patches-4.9/162-mtd-spi-nor-add-support-for-ESMT_f25l32qa-and-ESMT_f.patch b/target/linux/generic/patches-4.9/162-mtd-spi-nor-add-support-for-ESMT_f25l32qa-and-ESMT_f.patch deleted file mode 100644 index 2187136256..0000000000 --- a/target/linux/generic/patches-4.9/162-mtd-spi-nor-add-support-for-ESMT_f25l32qa-and-ESMT_f.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: "L. D. Pinney" <ldpinney@gmail.com> -Date: Thu, 25 Aug 2016 13:07:56 -0500 -Subject: [PATCH] mtd: spi-nor: add support for ESMT_f25l32qa and ESMT_f25l64qa - -Add Support for the ESMT_F25L32QA and ESMT_F25L64QA -These are 4MB and 8MB SPI NOR Chips from Elite Semiconductor Memory Technology - -Signed-off-by: L. D. Pinney <ldpinney@gmail.com> ---- - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -822,6 +822,8 @@ static const struct flash_info spi_nor_i - - /* ESMT */ - { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, -+ { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, SECT_4K) }, -+ { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K) }, - - /* Everspin */ - { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, diff --git a/target/linux/generic/patches-4.9/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/patches-4.9/465-m25p80-mx-disable-software-protection.patch index 0fe722487b..b42ff2e399 100644 --- a/target/linux/generic/patches-4.9/465-m25p80-mx-disable-software-protection.patch +++ b/target/linux/generic/patches-4.9/465-m25p80-mx-disable-software-protection.patch @@ -4,7 +4,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -1368,6 +1368,7 @@ int spi_nor_scan(struct spi_nor *nor, co +@@ -1588,6 +1588,7 @@ int spi_nor_scan(struct spi_nor *nor, co if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || JEDEC_MFR(info) == SNOR_MFR_INTEL || diff --git a/target/linux/generic/patches-4.9/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/patches-4.9/476-mtd-spi-nor-add-eon-en25q128.patch index 6e3c65d461..e586e73cda 100644 --- a/target/linux/generic/patches-4.9/476-mtd-spi-nor-add-eon-en25q128.patch +++ b/target/linux/generic/patches-4.9/476-mtd-spi-nor-add-eon-en25q128.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -816,6 +816,7 @@ static const struct flash_info spi_nor_i +@@ -954,6 +954,7 @@ static const struct flash_info spi_nor_i { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, diff --git a/target/linux/generic/patches-4.9/477-mtd-add-spi-nor-add-mx25u3235f.patch b/target/linux/generic/patches-4.9/477-mtd-add-spi-nor-add-mx25u3235f.patch index bd39ba556e..3960122b4f 100644 --- a/target/linux/generic/patches-4.9/477-mtd-add-spi-nor-add-mx25u3235f.patch +++ b/target/linux/generic/patches-4.9/477-mtd-add-spi-nor-add-mx25u3235f.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -873,6 +873,7 @@ static const struct flash_info spi_nor_i +@@ -1014,6 +1014,7 @@ static const struct flash_info spi_nor_i { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) }, { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) }, { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) }, |