aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/mvebu/files/arch/arm/boot/dts/armada-388-clearfog.dts456
-rw-r--r--target/linux/mvebu/files/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi115
-rw-r--r--target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch611
-rw-r--r--target/linux/mvebu/patches-4.4/054-ARM-dts-armada-38x-enable-buffer-manager-support-on-.patch256
-rw-r--r--target/linux/mvebu/patches-4.4/055-ARM-dts-armada-388-clearfog-remove-duplicate-mdio-en.patch41
-rw-r--r--target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch2
-rw-r--r--target/linux/mvebu/patches-4.4/209-solidrun_clearfog.patch10
7 files changed, 909 insertions, 582 deletions
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-388-clearfog.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-388-clearfog.dts
deleted file mode 100644
index c6e180eb3b..0000000000
--- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-388-clearfog.dts
+++ /dev/null
@@ -1,456 +0,0 @@
-/*
- * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
- *
- * Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board. Things will change, don't expect this file to
- * remain compatible info the future.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-#include "armada-38x-solidrun-microsom.dtsi"
-
-/ {
- model = "SolidRun Clearfog A1";
- compatible = "solidrun,clearfog-a1", "marvell,armada388",
- "marvell,armada385", "marvell,armada380";
-
- aliases {
- /* So that mvebu u-boot can update the MAC addresses */
- ethernet1 = &eth0;
- ethernet2 = &eth1;
- ethernet3 = &eth2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- soc {
- internal-regs {
- ethernet@30000 {
- phy-mode = "sgmii";
- status = "okay";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- ethernet@34000 {
- phy-mode = "sgmii";
- status = "okay";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- i2c@11000 {
- /* Is there anything on this? */
- clock-frequency = <100000>;
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- /*
- * PCA9655 GPIO expander, up to 1MHz clock.
- * 0-CON3 CLKREQ#
- * 1-CON3 PERST#
- * 2-CON2 PERST#
- * 3-CON3 W_DISABLE
- * 4-CON2 CLKREQ#
- * 5-USB3 overcurrent
- * 6-USB3 power
- * 7-CON2 W_DISABLE
- * 8-JP4 P1
- * 9-JP4 P4
- * 10-JP4 P5
- * 11-m.2 DEVSLP
- * 12-SFP_LOS
- * 13-SFP_TX_FAULT
- * 14-SFP_TX_DISABLE
- * 15-SFP_MOD_DEF0
- */
- expander0: gpio-expander@20 {
- /*
- * This is how it should be:
- * compatible = "onnn,pca9655",
- * "nxp,pca9555";
- * but you can't do this because of
- * the way I2C works.
- */
- compatible = "nxp,pca9555";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x20>;
-
- pcie1_0_clkreq {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_LOW>;
- input;
- line-name = "pcie1.0-clkreq";
- };
- pcie1_0_w_disable {
- gpio-hog;
- gpios = <3 GPIO_ACTIVE_LOW>;
- output-low;
- line-name = "pcie1.0-w-disable";
- };
- pcie2_0_clkreq {
- gpio-hog;
- gpios = <4 GPIO_ACTIVE_LOW>;
- input;
- line-name = "pcie2.0-clkreq";
- };
- pcie2_0_w_disable {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_LOW>;
- output-low;
- line-name = "pcie2.0-w-disable";
- };
- usb3_ilimit {
- gpio-hog;
- gpios = <5 GPIO_ACTIVE_LOW>;
- input;
- line-name = "usb3-current-limit";
- };
- usb3_power {
- gpio-hog;
- gpios = <6 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "usb3-power";
- };
- m2_devslp {
- gpio-hog;
- gpios = <11 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "m.2 devslp";
- };
- sfp_los {
- /* SFP loss of signal */
- gpio-hog;
- gpios = <12 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "sfp-los";
- };
- sfp_tx_fault {
- /* SFP laser fault */
- gpio-hog;
- gpios = <13 GPIO_ACTIVE_HIGH>;
- input;
- line-name = "sfp-tx-fault";
- };
- sfp_tx_disable {
- /* SFP transmit disable */
- gpio-hog;
- gpios = <14 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "sfp-tx-disable";
- };
- sfp_mod_def0 {
- /* SFP module present */
- gpio-hog;
- gpios = <15 GPIO_ACTIVE_LOW>;
- input;
- line-name = "sfp-mod-def0";
- };
- };
-
- /* The MCP3021 is 100kHz clock only */
- mikrobus_adc: mcp3021@4c {
- compatible = "microchip,mcp3021";
- reg = <0x4c>;
- };
-
- /* Also something at 0x64 */
- };
-
- i2c@11100 {
- /*
- * Routed to SFP, mikrobus, and PCIe.
- * SFP limits this to 100kHz, and requires
- * an AT24C01A/02/04 with address pins tied
- * low, which takes addresses 0x50 and 0x51.
- * Mikrobus doesn't specify beyond an I2C
- * bus being present.
- * PCIe uses ARP to assign addresses, or
- * 0x63-0x64.
- */
- clock-frequency = <100000>;
- pinctrl-0 = <&clearfog_i2c1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- mdio@72004 {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- phy_dedicated: ethernet-phy@0 {
- /*
- * Annoyingly, the marvell phy driver
- * configures the LED register, rather
- * than preserving reset-loaded setting.
- * We undo that rubbish here.
- */
- marvell,reg-init = <3 16 0 0x101e>;
- reg = <0>;
- };
- };
-
- pinctrl@18000 {
- clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
- marvell,pins = "mpp46";
- marvell,function = "ref";
- };
- clearfog_dsa0_pins: clearfog-dsa0-pins {
- marvell,pins = "mpp23", "mpp41";
- marvell,function = "gpio";
- };
- clearfog_i2c1_pins: i2c1-pins {
- /* SFP, PCIe, mSATA, mikrobus */
- marvell,pins = "mpp26", "mpp27";
- marvell,function = "i2c1";
- };
- clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
- marvell,pins = "mpp20";
- marvell,function = "gpio";
- };
- clearfog_sdhci_pins: clearfog-sdhci-pins {
- marvell,pins = "mpp21", "mpp28",
- "mpp37", "mpp38",
- "mpp39", "mpp40";
- marvell,function = "sd0";
- };
- clearfog_spi1_cs_pins: spi1-cs-pins {
- marvell,pins = "mpp55";
- marvell,function = "spi1";
- };
- mikro_pins: mikro-pins {
- /* int: mpp22 rst: mpp29 */
- marvell,pins = "mpp22", "mpp29";
- marvell,function = "gpio";
- };
- mikro_spi_pins: mikro-spi-pins {
- marvell,pins = "mpp43";
- marvell,function = "spi1";
- };
- mikro_uart_pins: mikro-uart-pins {
- marvell,pins = "mpp24", "mpp25";
- marvell,function = "ua1";
- };
- rear_button_pins: rear-button-pins {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
- };
-
- sata@a8000 {
- /* pinctrl? */
- status = "okay";
- };
-
- sata@e0000 {
- /* pinctrl? */
- status = "okay";
- };
-
- sdhci@d8000 {
- bus-width = <4>;
- cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- pinctrl-0 = <&clearfog_sdhci_pins
- &clearfog_sdhci_cd_pins>;
- pinctrl-names = "default";
- status = "okay";
- vmmc = <&reg_3p3v>;
- wp-inverted;
- };
-
- serial@12100 {
- /* mikrobus uart */
- pinctrl-0 = <&mikro_uart_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- spi@10680 {
- /*
- * We don't seem to have the W25Q32 on the
- * A1 Rev 2.0 boards, so disable SPI.
- * CS0: W25Q32 (doesn't appear to be present)
- * CS1:
- * CS2: mikrobus
- */
- pinctrl-0 = <&spi1_pins
- &clearfog_spi1_cs_pins
- &mikro_spi_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "w25q32", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <3000000>;
- status = "disabled";
- };
- };
-
- usb@58000 {
- /* CON3, nearest power. */
- status = "okay";
- };
-
- usb3@f0000 {
- /* CON2, nearest CPU, USB2 only. */
- status = "okay";
- };
-
- usb3@f8000 {
- /* CON7 */
- status = "okay";
- };
- };
-
- pcie-controller {
- status = "okay";
- /*
- * The two PCIe units are accessible through
- * the mini-PCIe connectors on the board.
- */
- pcie@2,0 {
- /* Port 1, Lane 0. CON3, nearest power. */
- reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
- status = "okay";
- };
- pcie@3,0 {
- /* Port 2, Lane 0. CON2, nearest CPU. */
- reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
- status = "okay";
- };
- };
- };
-
- dsa@0 {
- compatible = "marvell,dsa";
- dsa,ethernet = <&eth1>;
- dsa,mii-bus = <&mdio>;
- pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
- pinctrl-names = "default";
- #address-cells = <2>;
- #size-cells = <0>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4 0>;
-
- port@0 {
- reg = <0>;
- label = "lan1";
- };
-
- port@1 {
- reg = <1>;
- label = "lan2";
- };
-
- port@2 {
- reg = <2>;
- label = "lan3";
- };
-
- port@3 {
- reg = <3>;
- label = "lan4";
- };
-
- port@4 {
- reg = <4>;
- label = "lan5";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
-
- port@6 {
- /* 88E1512 external phy */
- reg = <6>;
- label = "lan6";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&rear_button_pins>;
- pinctrl-names = "default";
-
- button_0 {
- /* The rear SW3 button */
- label = "Rear Button";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- linux,can-disable;
- linux,code = <BTN_0>;
- };
- };
-};
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/target/linux/mvebu/files/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
deleted file mode 100644
index 3f792a563c..0000000000
--- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree file for SolidRun Armada 38x Microsom
- *
- * Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board. Things will change, don't expect this file to
- * remain compatible info the future.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-
- internal-regs {
- ethernet@70000 {
- pinctrl-0 = <&ge0_rgmii_pins>;
- pinctrl-names = "default";
- phy = <&phy_dedicated>;
- phy-mode = "rgmii-id";
- status = "okay";
- };
-
- mdio@72004 {
- /*
- * Add the phy clock here, so the phy can be
- * accessed to read its IDs prior to binding
- * with the driver.
- */
- pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
- pinctrl-names = "default";
-
- phy_dedicated: ethernet-phy@0 {
- /*
- * Annoyingly, the marvell phy driver
- * configures the LED register, rather
- * than preserving reset-loaded setting.
- * We undo that rubbish here.
- */
- marvell,reg-init = <3 16 0 0x101e>;
- reg = <0>;
- };
- };
-
- pinctrl@18000 {
- microsom_phy_clk_pins: microsom-phy-clk-pins {
- marvell,pins = "mpp45";
- marvell,function = "ref";
- };
- };
-
- rtc@a3800 {
- /*
- * If the rtc doesn't work, run "date reset"
- * twice in u-boot.
- */
- status = "okay";
- };
-
- serial@12000 {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
- };
- };
-};
diff --git a/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch b/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch
new file mode 100644
index 0000000000..abf2a63425
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch
@@ -0,0 +1,611 @@
+From 4c945e8556ec7ea5b19d4f8721b212f468656e0d Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Sun, 6 Dec 2015 21:52:06 +0000
+Subject: [PATCH] ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file
+
+Add support for the SolidRun Armada 388 Clearfog A1 board. This board
+has an Armada 388 microsom, dedicated gigabit ethernet, six switched
+gigabit ethernet ports, SFP cage, two Mini-PCIe/mSATA slots, a m.2 SATA
+slot, and a MikroBUS connector to allow MikroBUS modules to be added.
+
+This DT file adds support for all board facilities with the exception
+of full SFP support.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/armada-388-clearfog.dts | 456 +++++++++++++++++++++
+ .../arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 115 ++++++
+ 3 files changed, 572 insertions(+)
+ create mode 100644 arch/arm/boot/dts/armada-388-clearfog.dts
+ create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -749,6 +749,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-linksys-caiman.dtb \
+ armada-385-linksys-cobra.dtb \
+ armada-385-linksys-shelby.dtb \
++ armada-388-clearfog.dtb \
+ armada-388-db.dtb \
+ armada-388-gp.dtb \
+ armada-388-rd.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/armada-388-clearfog.dts
+@@ -0,0 +1,456 @@
++/*
++ * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
++ *
++ * Copyright (C) 2015 Russell King
++ *
++ * This board is in development; the contents of this file work with
++ * the A1 rev 2.0 of the board, which does not represent final
++ * production board. Things will change, don't expect this file to
++ * remain compatible info the future.
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This file is distributed in the hope that it will be useful
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "armada-388.dtsi"
++#include "armada-38x-solidrun-microsom.dtsi"
++
++/ {
++ model = "SolidRun Clearfog A1";
++ compatible = "solidrun,clearfog-a1", "marvell,armada388",
++ "marvell,armada385", "marvell,armada380";
++
++ aliases {
++ /* So that mvebu u-boot can update the MAC addresses */
++ ethernet1 = &eth0;
++ ethernet2 = &eth1;
++ ethernet3 = &eth2;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ soc {
++ internal-regs {
++ ethernet@30000 {
++ phy-mode = "sgmii";
++ status = "okay";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ ethernet@34000 {
++ phy-mode = "sgmii";
++ status = "okay";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ i2c@11000 {
++ /* Is there anything on this? */
++ clock-frequency = <100000>;
++ pinctrl-0 = <&i2c0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ /*
++ * PCA9655 GPIO expander, up to 1MHz clock.
++ * 0-CON3 CLKREQ#
++ * 1-CON3 PERST#
++ * 2-CON2 PERST#
++ * 3-CON3 W_DISABLE
++ * 4-CON2 CLKREQ#
++ * 5-USB3 overcurrent
++ * 6-USB3 power
++ * 7-CON2 W_DISABLE
++ * 8-JP4 P1
++ * 9-JP4 P4
++ * 10-JP4 P5
++ * 11-m.2 DEVSLP
++ * 12-SFP_LOS
++ * 13-SFP_TX_FAULT
++ * 14-SFP_TX_DISABLE
++ * 15-SFP_MOD_DEF0
++ */
++ expander0: gpio-expander@20 {
++ /*
++ * This is how it should be:
++ * compatible = "onnn,pca9655",
++ * "nxp,pca9555";
++ * but you can't do this because of
++ * the way I2C works.
++ */
++ compatible = "nxp,pca9555";
++ gpio-controller;
++ #gpio-cells = <2>;
++ reg = <0x20>;
++
++ pcie1_0_clkreq {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_LOW>;
++ input;
++ line-name = "pcie1.0-clkreq";
++ };
++ pcie1_0_w_disable {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_LOW>;
++ output-low;
++ line-name = "pcie1.0-w-disable";
++ };
++ pcie2_0_clkreq {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_LOW>;
++ input;
++ line-name = "pcie2.0-clkreq";
++ };
++ pcie2_0_w_disable {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_LOW>;
++ output-low;
++ line-name = "pcie2.0-w-disable";
++ };
++ usb3_ilimit {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_LOW>;
++ input;
++ line-name = "usb3-current-limit";
++ };
++ usb3_power {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "usb3-power";
++ };
++ m2_devslp {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "m.2 devslp";
++ };
++ sfp_los {
++ /* SFP loss of signal */
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "sfp-los";
++ };
++ sfp_tx_fault {
++ /* SFP laser fault */
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "sfp-tx-fault";
++ };
++ sfp_tx_disable {
++ /* SFP transmit disable */
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "sfp-tx-disable";
++ };
++ sfp_mod_def0 {
++ /* SFP module present */
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_LOW>;
++ input;
++ line-name = "sfp-mod-def0";
++ };
++ };
++
++ /* The MCP3021 is 100kHz clock only */
++ mikrobus_adc: mcp3021@4c {
++ compatible = "microchip,mcp3021";
++ reg = <0x4c>;
++ };
++
++ /* Also something at 0x64 */
++ };
++
++ i2c@11100 {
++ /*
++ * Routed to SFP, mikrobus, and PCIe.
++ * SFP limits this to 100kHz, and requires
++ * an AT24C01A/02/04 with address pins tied
++ * low, which takes addresses 0x50 and 0x51.
++ * Mikrobus doesn't specify beyond an I2C
++ * bus being present.
++ * PCIe uses ARP to assign addresses, or
++ * 0x63-0x64.
++ */
++ clock-frequency = <100000>;
++ pinctrl-0 = <&clearfog_i2c1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ };
++
++ mdio@72004 {
++ pinctrl-0 = <&mdio_pins>;
++ pinctrl-names = "default";
++
++ phy_dedicated: ethernet-phy@0 {
++ /*
++ * Annoyingly, the marvell phy driver
++ * configures the LED register, rather
++ * than preserving reset-loaded setting.
++ * We undo that rubbish here.
++ */
++ marvell,reg-init = <3 16 0 0x101e>;
++ reg = <0>;
++ };
++ };
++
++ pinctrl@18000 {
++ clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
++ marvell,pins = "mpp46";
++ marvell,function = "ref";
++ };
++ clearfog_dsa0_pins: clearfog-dsa0-pins {
++ marvell,pins = "mpp23", "mpp41";
++ marvell,function = "gpio";
++ };
++ clearfog_i2c1_pins: i2c1-pins {
++ /* SFP, PCIe, mSATA, mikrobus */
++ marvell,pins = "mpp26", "mpp27";
++ marvell,function = "i2c1";
++ };
++ clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
++ marvell,pins = "mpp20";
++ marvell,function = "gpio";
++ };
++ clearfog_sdhci_pins: clearfog-sdhci-pins {
++ marvell,pins = "mpp21", "mpp28",
++ "mpp37", "mpp38",
++ "mpp39", "mpp40";
++ marvell,function = "sd0";
++ };
++ clearfog_spi1_cs_pins: spi1-cs-pins {
++ marvell,pins = "mpp55";
++ marvell,function = "spi1";
++ };
++ mikro_pins: mikro-pins {
++ /* int: mpp22 rst: mpp29 */
++ marvell,pins = "mpp22", "mpp29";
++ marvell,function = "gpio";
++ };
++ mikro_spi_pins: mikro-spi-pins {
++ marvell,pins = "mpp43";
++ marvell,function = "spi1";
++ };
++ mikro_uart_pins: mikro-uart-pins {
++ marvell,pins = "mpp24", "mpp25";
++ marvell,function = "ua1";
++ };
++ rear_button_pins: rear-button-pins {
++ marvell,pins = "mpp34";
++ marvell,function = "gpio";
++ };
++ };
++
++ sata@a8000 {
++ /* pinctrl? */
++ status = "okay";
++ };
++
++ sata@e0000 {
++ /* pinctrl? */
++ status = "okay";
++ };
++
++ sdhci@d8000 {
++ bus-width = <4>;
++ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
++ no-1-8-v;
++ pinctrl-0 = <&clearfog_sdhci_pins
++ &clearfog_sdhci_cd_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ vmmc = <&reg_3p3v>;
++ wp-inverted;
++ };
++
++ serial@12100 {
++ /* mikrobus uart */
++ pinctrl-0 = <&mikro_uart_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ };
++
++ spi@10680 {
++ /*
++ * We don't seem to have the W25Q32 on the
++ * A1 Rev 2.0 boards, so disable SPI.
++ * CS0: W25Q32 (doesn't appear to be present)
++ * CS1:
++ * CS2: mikrobus
++ */
++ pinctrl-0 = <&spi1_pins
++ &clearfog_spi1_cs_pins
++ &mikro_spi_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ spi-flash@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "w25q32", "jedec,spi-nor";
++ reg = <0>; /* Chip select 0 */
++ spi-max-frequency = <3000000>;
++ status = "disabled";
++ };
++ };
++
++ usb@58000 {
++ /* CON3, nearest power. */
++ status = "okay";
++ };
++
++ usb3@f0000 {
++ /* CON2, nearest CPU, USB2 only. */
++ status = "okay";
++ };
++
++ usb3@f8000 {
++ /* CON7 */
++ status = "okay";
++ };
++ };
++
++ pcie-controller {
++ status = "okay";
++ /*
++ * The two PCIe units are accessible through
++ * the mini-PCIe connectors on the board.
++ */
++ pcie@2,0 {
++ /* Port 1, Lane 0. CON3, nearest power. */
++ reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
++ status = "okay";
++ };
++ pcie@3,0 {
++ /* Port 2, Lane 0. CON2, nearest CPU. */
++ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
++ status = "okay";
++ };
++ };
++ };
++
++ dsa@0 {
++ compatible = "marvell,dsa";
++ dsa,ethernet = <&eth1>;
++ dsa,mii-bus = <&mdio>;
++ pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
++ pinctrl-names = "default";
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ switch@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4 0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan1";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan2";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan3";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan4";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan5";
++ };
++
++ port@5 {
++ reg = <5>;
++ label = "cpu";
++ };
++
++ port@6 {
++ /* 88E1512 external phy */
++ reg = <6>;
++ label = "lan6";
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ pinctrl-0 = <&rear_button_pins>;
++ pinctrl-names = "default";
++
++ button_0 {
++ /* The rear SW3 button */
++ label = "Rear Button";
++ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
++ linux,can-disable;
++ linux,code = <BTN_0>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+@@ -0,0 +1,115 @@
++/*
++ * Device Tree file for SolidRun Armada 38x Microsom
++ *
++ * Copyright (C) 2015 Russell King
++ *
++ * This board is in development; the contents of this file work with
++ * the A1 rev 2.0 of the board, which does not represent final
++ * production board. Things will change, don't expect this file to
++ * remain compatible info the future.
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This file is distributed in the hope that it will be useful
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x10000000>; /* 256 MB */
++ };
++
++ soc {
++ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
++ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
++ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
++
++ internal-regs {
++ ethernet@70000 {
++ pinctrl-0 = <&ge0_rgmii_pins>;
++ pinctrl-names = "default";
++ phy = <&phy_dedicated>;
++ phy-mode = "rgmii-id";
++ status = "okay";
++ };
++
++ mdio@72004 {
++ /*
++ * Add the phy clock here, so the phy can be
++ * accessed to read its IDs prior to binding
++ * with the driver.
++ */
++ pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
++ pinctrl-names = "default";
++
++ phy_dedicated: ethernet-phy@0 {
++ /*
++ * Annoyingly, the marvell phy driver
++ * configures the LED register, rather
++ * than preserving reset-loaded setting.
++ * We undo that rubbish here.
++ */
++ marvell,reg-init = <3 16 0 0x101e>;
++ reg = <0>;
++ };
++ };
++
++ pinctrl@18000 {
++ microsom_phy_clk_pins: microsom-phy-clk-pins {
++ marvell,pins = "mpp45";
++ marvell,function = "ref";
++ };
++ };
++
++ rtc@a3800 {
++ /*
++ * If the rtc doesn't work, run "date reset"
++ * twice in u-boot.
++ */
++ status = "okay";
++ };
++
++ serial@12000 {
++ pinctrl-0 = <&uart0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ };
++ };
++ };
++};
diff --git a/target/linux/mvebu/patches-4.4/054-ARM-dts-armada-38x-enable-buffer-manager-support-on-.patch b/target/linux/mvebu/patches-4.4/054-ARM-dts-armada-38x-enable-buffer-manager-support-on-.patch
new file mode 100644
index 0000000000..705d503c68
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/054-ARM-dts-armada-38x-enable-buffer-manager-support-on-.patch
@@ -0,0 +1,256 @@
+From c49e99c2b25a412623412a461bb751239208b9b3 Mon Sep 17 00:00:00 2001
+From: Marcin Wojtas <mw@semihalf.com>
+Date: Mon, 14 Mar 2016 09:38:58 +0100
+Subject: [PATCH] ARM: dts: armada-38x: enable buffer manager support on Armada
+ 38x boards
+
+Since mvneta driver supports using hardware buffer management (BM), in
+order to use it, board files have to be adjusted accordingly. This commit
+enables BM on:
+* A385-DB-AP - each port has its own pool for long and common pool for
+short packets,
+* A388-ClearFog - same as above,
+* A388-DB - to each port unique 'short' and 'long' pools are mapped,
+* A388-GP - same as above.
+
+Moreover appropriate entry is added to 'soc' node ranges, as well as "okay"
+status for 'bm' and 'bm-bppi' (internal SRAM) nodes.
+
+[gregory.clement@free-electrons.com: add suppport for the ClearFog board]
+
+Signed-off-by: Marcin Wojtas <mw@semihalf.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ arch/arm/boot/dts/armada-385-db-ap.dts | 20 +++++++++++++++++++-
+ arch/arm/boot/dts/armada-388-clearfog.dts | 6 ++++++
+ arch/arm/boot/dts/armada-388-db.dts | 17 ++++++++++++++++-
+ arch/arm/boot/dts/armada-388-gp.dts | 17 ++++++++++++++++-
+ arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 15 ++++++++++++++-
+ 5 files changed, 71 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-385-db-ap.dts
++++ b/arch/arm/boot/dts/armada-385-db-ap.dts
+@@ -61,7 +61,8 @@
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+ spi1: spi@10680 {
+@@ -138,12 +139,18 @@
+ status = "okay";
+ phy = <&phy2>;
+ phy-mode = "sgmii";
++ buffer-manager = <&bm>;
++ bm,pool-long = <1>;
++ bm,pool-short = <3>;
+ };
+
+ ethernet@34000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
++ buffer-manager = <&bm>;
++ bm,pool-long = <2>;
++ bm,pool-short = <3>;
+ };
+
+ ethernet@70000 {
+@@ -157,6 +164,13 @@
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <0>;
++ bm,pool-short = <3>;
++ };
++
++ bm@c8000 {
++ status = "okay";
+ };
+
+ nfc: flash@d0000 {
+@@ -178,6 +192,10 @@
+ };
+ };
+
++ bm-bppi {
++ status = "okay";
++ };
++
+ pcie-controller {
+ status = "okay";
+
+--- a/arch/arm/boot/dts/armada-388-clearfog.dts
++++ b/arch/arm/boot/dts/armada-388-clearfog.dts
+@@ -78,6 +78,9 @@
+ internal-regs {
+ ethernet@30000 {
+ phy-mode = "sgmii";
++ buffer-manager = <&bm>;
++ bm,pool-long = <2>;
++ bm,pool-short = <1>;
+ status = "okay";
+
+ fixed-link {
+@@ -88,6 +91,9 @@
+
+ ethernet@34000 {
+ phy-mode = "sgmii";
++ buffer-manager = <&bm>;
++ bm,pool-long = <3>;
++ bm,pool-short = <1>;
+ status = "okay";
+
+ fixed-link {
+--- a/arch/arm/boot/dts/armada-388-db.dts
++++ b/arch/arm/boot/dts/armada-388-db.dts
+@@ -66,7 +66,8 @@
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+@@ -99,6 +100,9 @@
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <2>;
++ bm,pool-short = <3>;
+ };
+
+ usb@58000 {
+@@ -109,6 +113,9 @@
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <0>;
++ bm,pool-short = <1>;
+ };
+
+ mdio@72004 {
+@@ -129,6 +136,10 @@
+ status = "okay";
+ };
+
++ bm@c8000 {
++ status = "okay";
++ };
++
+ flash@d0000 {
+ status = "okay";
+ num-cs = <1>;
+@@ -169,6 +180,10 @@
+ };
+ };
+
++ bm-bppi {
++ status = "okay";
++ };
++
+ pcie-controller {
+ status = "okay";
+ /*
+--- a/arch/arm/boot/dts/armada-388-gp.dts
++++ b/arch/arm/boot/dts/armada-388-gp.dts
+@@ -60,7 +60,8 @@
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+@@ -133,6 +134,9 @@
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <2>;
++ bm,pool-short = <3>;
+ };
+
+ /* CON4 */
+@@ -152,6 +156,9 @@
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <0>;
++ bm,pool-short = <1>;
+ };
+
+
+@@ -186,6 +193,10 @@
+ };
+ };
+
++ bm@c8000 {
++ status = "okay";
++ };
++
+ sata@e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
+@@ -240,6 +251,10 @@
+ };
+ };
+
++ bm-bppi {
++ status = "okay";
++ };
++
+ pcie-controller {
+ status = "okay";
+ /*
+--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
++++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+@@ -58,7 +58,8 @@
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+ ethernet@70000 {
+@@ -66,6 +67,9 @@
+ pinctrl-names = "default";
+ phy = <&phy_dedicated>;
+ phy-mode = "rgmii-id";
++ buffer-manager = <&bm>;
++ bm,pool-long = <0>;
++ bm,pool-short = <1>;
+ status = "okay";
+ };
+
+@@ -110,6 +114,15 @@
+ pinctrl-names = "default";
+ status = "okay";
+ };
++
++ bm@c8000 {
++ status = "okay";
++ };
+ };
++
++ bm-bppi {
++ status = "okay";
++ };
++
+ };
+ };
diff --git a/target/linux/mvebu/patches-4.4/055-ARM-dts-armada-388-clearfog-remove-duplicate-mdio-en.patch b/target/linux/mvebu/patches-4.4/055-ARM-dts-armada-388-clearfog-remove-duplicate-mdio-en.patch
new file mode 100644
index 0000000000..823d514dfa
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/055-ARM-dts-armada-388-clearfog-remove-duplicate-mdio-en.patch
@@ -0,0 +1,41 @@
+From d261861ab52623e34a25fe6ae76714456edda033 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sun, 10 Jul 2016 16:27:38 +0100
+Subject: [PATCH] ARM: dts: armada-388-clearfog: remove duplicate mdio entry
+
+The clearfog DTS should not be defining the on-board phy, this device
+is located on the microsom. Remove the duplicated definition.
+
+Reported-by: Jon Nettleton <jon@solid-run.com>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+---
+ arch/arm/boot/dts/armada-388-clearfog.dts | 16 ----------------
+ 1 file changed, 16 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-388-clearfog.dts
++++ b/arch/arm/boot/dts/armada-388-clearfog.dts
+@@ -239,22 +239,6 @@
+ status = "okay";
+ };
+
+- mdio@72004 {
+- pinctrl-0 = <&mdio_pins>;
+- pinctrl-names = "default";
+-
+- phy_dedicated: ethernet-phy@0 {
+- /*
+- * Annoyingly, the marvell phy driver
+- * configures the LED register, rather
+- * than preserving reset-loaded setting.
+- * We undo that rubbish here.
+- */
+- marvell,reg-init = <3 16 0 0x101e>;
+- reg = <0>;
+- };
+- };
+-
+ pinctrl@18000 {
+ clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+ marvell,pins = "mpp46";
diff --git a/target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch
index a06b51f2ab..d2aaeef4aa 100644
--- a/target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch
+++ b/target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch
@@ -10,7 +10,7 @@ Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -170,6 +170,21 @@
+@@ -184,6 +184,21 @@
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
diff --git a/target/linux/mvebu/patches-4.4/209-solidrun_clearfog.patch b/target/linux/mvebu/patches-4.4/209-solidrun_clearfog.patch
deleted file mode 100644
index 80a09465bd..0000000000
--- a/target/linux/mvebu/patches-4.4/209-solidrun_clearfog.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -749,6 +749,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-linksys-caiman.dtb \
- armada-385-linksys-cobra.dtb \
- armada-385-linksys-shelby.dtb \
-+ armada-388-clearfog.dtb \
- armada-388-db.dtb \
- armada-388-gp.dtb \
- armada-388-rd.dtb