diff options
333 files changed, 6014 insertions, 20689 deletions
diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index a1eedce014..30da1cfe25 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -10,11 +10,11 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=mac80211 -PKG_VERSION:=2015-03-09 -PKG_RELEASE:=3 +PKG_VERSION:=2016-01-10 +PKG_RELEASE:=1 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources PKG_BACKPORT_VERSION:= -PKG_MD5SUM:=6d4b04e4ce8a1f54dabfb04f4709453c +PKG_MD5SUM:=be5fae2e8d6f7490f9b073374fb895ba PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION) @@ -23,15 +23,29 @@ PKG_BUILD_PARALLEL:=1 PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org> PKG_DRIVERS = \ - adm8211 ath5k libertas-usb libertas-sdio p54-common p54-pci p54-usb p54-spi \ - rt2x00-lib rt2x00-pci rt2x00-usb rt2800-lib rt2400-pci rt2500-pci \ - rt2500-usb rt61-pci rt73-usb rt2800-mmio rt2800-pci rt2800-usb rt2800-soc \ - rtl8180 rtl8187 zd1211rw mac80211-hwsim carl9170 b43 b43legacy \ - ath9k-common ath9k ath9k-htc ath10k ath net-libipw net-ipw2100 net-ipw2200 \ - mwl8k mwifiex-pcie net-hermes net-hermes-pci net-hermes-plx net-hermes-pcmcia \ - iwl-legacy iwl3945 iwl4965 iwlagn wlcore wl12xx wl18xx lib80211 \ + adm8211 \ + ath ath5k ath9k ath9k-common ath9k-htc ath10k \ + b43 b43legacy \ + carl9170 \ + hermes hermes-pci hermes-pcmcia hermes-plx\ + iwl-legacy iwl3945 iwl4965 iwlwifi \ + lib80211 \ + libipw ipw2100 ipw2200 \ + libertas-sdio libertas-usb libertas-spi \ + mac80211-hwsim \ + mt7601u \ + mwl8k mwifiex-pcie \ + p54-common p54-pci p54-spi p54-usb \ + rt2x00-lib rt2x00-pci rt2x00-usb \ + rt2400-pci rt2500-pci rt2500-usb \ + rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \ + rt61-pci rt73-usb \ + rtl8180 rtl8187 \ rtlwifi rtlwifi-pci rtlwifi-usb rtl8192c-common rtl8192ce rtl8192se \ - rtl8192de rtl8192cu + rtl8192de rtl8192cu \ + rtl8xxxu \ + wlcore wl12xx wl18xx \ + zd1211rw PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_kmod-mac80211 \ @@ -60,7 +74,6 @@ define KernelPackage/mac80211/Default SUBMENU:=$(WMENU) URL:=https://wireless.wiki.kernel.org/ MAINTAINER:=Felix Fietkau <nbd@openwrt.org> - DEPENDS:=@!TARGET_uml endef define KernelPackage/cfg80211 @@ -79,7 +92,7 @@ endef define KernelPackage/mac80211 $(call KernelPackage/mac80211/Default) TITLE:=Linux 802.11 Wireless Networking Stack - DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211 +hostapd-common + DEPENDS+= +kmod-cfg80211 +hostapd-common +kmod-crypto-core +kmod-crypto-arc4 KCONFIG:=\ CONFIG_AVERAGE=y FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko @@ -97,6 +110,15 @@ define KernelPackage/mac80211/config Select this to see extensive information about the internal state of mac80211 in debugfs. + config PACKAGE_MAC80211_TRACING + bool "Enable tracing (mac80211 and supported drivers)" + select KERNEL_FTRACE + select KERNEL_ENABLE_DEFAULT_TRACERS + default n + help + Select this to enable tracing of mac80211 and + related wifi drivers (using trace-cmd). + config PACKAGE_MAC80211_MESH bool "Enable 802.11s mesh support" default y @@ -108,394 +130,11 @@ define KernelPackage/mac80211/description Generic IEEE 802.11 Networking Stack (mac80211) endef -PKG_LINUX_FIRMWARE_NAME:=linux-firmware -PKG_LINUX_FIRMWARE_VERSION:=f404336ba808cbd57547196e13367079a23b822c -PKG_LINUX_FIRMWARE_SOURCE:=$(PKG_LINUX_FIRMWARE_NAME)-2015-03-20-$(PKG_LINUX_FIRMWARE_VERSION).tar.bz2 -PKG_LINUX_FIRMWARE_PROTO:=git -PKG_LINUX_FIRMWARE_SOURCE_URL:=https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git -PKG_LINUX_FIRMWARE_SUBDIR:=$(PKG_LINUX_FIRMWARE_NAME)-$(PKG_LINUX_FIRMWARE_VERSION) -#PKG_LINUX_FIRMWARE_MIRROR_MD5SUM:=e219333f01835c6e556875a9e0deb3f9 - -define Download/linux-firmware - FILE:=$(PKG_LINUX_FIRMWARE_SOURCE) - URL:=$(PKG_LINUX_FIRMWARE_SOURCE_URL) - MD5SUM:=$(PKG_LINUX_FIRMWARE_MD5SUM) - PROTO:=$(PKG_LINUX_FIRMWARE_PROTO) - VERSION:=$(PKG_LINUX_FIRMWARE_VERSION) - SUBDIR:=$(PKG_LINUX_FIRMWARE_SUBDIR) - MIRROR_MD5SUM:=$(PKG_LINUX_FIRMWARE_MIRROR_MD5SUM) -endef -$(eval $(call Download,linux-firmware)) - -PKG_ATH10K_LINUX_FIRMWARE_NAME:=ath10k-firmware -PKG_ATH10K_LINUX_FIRMWARE_VERSION:=da0f85d924226ee30c46e037120621c9e192b39e -PKG_ATH10K_LINUX_FIRMWARE_SOURCE:=$(PKG_ATH10K_LINUX_FIRMWARE_NAME)-$(PKG_ATH10K_LINUX_FIRMWARE_VERSION).tar.bz2 -PKG_ATH10K_LINUX_FIRMWARE_PROTO:=git -PKG_ATH10K_LINUX_FIRMWARE_SOURCE_URL:=https://github.com/kvalo/ath10k-firmware.git -PKG_ATH10K_LINUX_FIRMWARE_SUBDIR:=$(PKG_ATH10K_LINUX_FIRMWARE_NAME)-$(PKG_ATH10K_LINUX_FIRMWARE_VERSION) -#PKG_ATH10K_LINUX_FIRMWARE_MIRROR_MD5SUM:=? - -define Download/ath10k-firmware - FILE:=$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE) - URL:=$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE_URL) - PROTO:=$(PKG_ATH10K_LINUX_FIRMWARE_PROTO) - VERSION:=$(PKG_ATH10K_LINUX_FIRMWARE_VERSION) - SUBDIR:=$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR) - #MIRROR_MD5SUM:=$(PKG_ATH10K_LINUX_FIRMWARE_MIRROR_MD5SUM) -endef -$(eval $(call Download,ath10k-firmware)) - -# Prism54 drivers -P54PCIFW:=2.13.12.0.arm -P54USBFW:=2.13.24.0.lm87.arm -P54SPIFW:=2.13.0.0.a.13.14.arm - -define Download/p54usb - FILE:=$(P54USBFW) - URL:=http://daemonizer.de/prism54/prism54-fw/fw-usb - MD5SUM:=8e8ab005a4f8f0123bcdc51bc25b47f6 -endef -$(eval $(call Download,p54usb)) - -define Download/p54pci - FILE:=$(P54PCIFW) - URL:=http://daemonizer.de/prism54/prism54-fw/fw-softmac - MD5SUM:=ff7536af2092b1c4b21315bd103ef4c4 -endef -$(eval $(call Download,p54pci)) - -define Download/p54spi - FILE:=$(P54SPIFW) - URL:=http://daemonizer.de/prism54/prism54-fw/stlc4560 - MD5SUM:=42661f8ecbadd88012807493f596081d -endef -$(eval $(call Download,p54spi)) - -define KernelPackage/p54/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Prism54 Drivers -endef - -define KernelPackage/p54/description - Kernel module for Prism54 chipsets (mac80211) -endef - -define KernelPackage/p54-common - $(call KernelPackage/p54/Default) - DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt - TITLE+= (COMMON) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54common.ko -endef - -define KernelPackage/p54-pci - $(call KernelPackage/p54/Default) - TITLE+= (PCI) - DEPENDS+= @PCI_SUPPORT +kmod-p54-common - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54pci.ko - AUTOLOAD:=$(call AutoProbe,p54pci) -endef - -define KernelPackage/p54-usb - $(call KernelPackage/p54/Default) - TITLE+= (USB) - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54usb.ko - AUTOLOAD:=$(call AutoProbe,p54usb) -endef - -define KernelPackage/p54-spi - $(call KernelPackage/p54/Default) - TITLE+= (SPI) - DEPENDS+= @TARGET_omap24xx +kmod-p54-common - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54spi.ko - AUTOLOAD:=$(call AutoProbe,p54spi) -endef - -define KernelPackage/rt2x00/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Ralink Drivers for RT2x00 cards -endef - -define KernelPackage/rt2x00-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t - TITLE+= (LIB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.ko - MENU:=1 -endef - -define KernelPackage/rt2x00-lib/config - if PACKAGE_kmod-rt2x00-lib - - config PACKAGE_RT2X00_LIB_DEBUGFS - bool "Enable rt2x00 debugfs support" - depends on PACKAGE_MAC80211_DEBUGFS - help - Enable creation of debugfs files for the rt2x00 drivers. - These debugfs files support both reading and writing of the - most important register types of the rt2x00 hardware. - - config PACKAGE_RT2X00_DEBUG - bool "Enable rt2x00 debug output" - help - Enable debugging output for all rt2x00 modules - - endif -endef - -define KernelPackage/rt2x00-mmio -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 - HIDDEN:=1 - TITLE+= (MMIO) - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00mmio.ko -endef - -define KernelPackage/rt2x00-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib - HIDDEN:=1 - TITLE+= (PCI) - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.ko - AUTOLOAD:=$(call AutoProbe,rt2x00pci) -endef - -define KernelPackage/rt2x00-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core - HIDDEN:=1 - TITLE+= (USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.ko - AUTOLOAD:=$(call AutoProbe,rt2x00usb) -endef - -define KernelPackage/rt2800-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT - HIDDEN:=1 - TITLE+= (rt2800 LIB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800lib.ko -endef - -define KernelPackage/rt2400-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2400 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.ko - AUTOLOAD:=$(call AutoProbe,rt2400pci) -endef - -define KernelPackage/rt2500-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2500 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.ko - AUTOLOAD:=$(call AutoProbe,rt2500pci) -endef - -define KernelPackage/rt2500-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb - TITLE+= (RT2500 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.ko - AUTOLOAD:=$(call AutoProbe,rt2500usb) -endef - -define KernelPackage/rt61-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2x61 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.ko - AUTOLOAD:=$(call AutoProbe,rt61pci) -endef - -define KernelPackage/rt73-usb - $(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb - TITLE+= (RT73 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.ko - AUTOLOAD:=$(call AutoProbe,rt73usb) -endef - -define KernelPackage/rt2800-mmio -$(call KernelPackage/rt2x00/Default) - TITLE += (RT28xx/RT3xxx MMIO) - DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio - HIDDEN:=1 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800mmio.ko -endef - -define KernelPackage/rt2800-soc -$(call KernelPackage/rt2x00/Default) - DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib - TITLE += (RT28xx/RT3xxx SoC) - FILES := \ - $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800soc.ko - AUTOLOAD:=$(call AutoProbe,rt2800soc) -endef - -define KernelPackage/rt2800-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio - TITLE+= (RT2860 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.ko - AUTOLOAD:=$(call AutoProbe,rt2800pci) -endef - -define KernelPackage/rt2800-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt - TITLE+= (RT2870 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800usb.ko - AUTOLOAD:=$(call AutoProbe,rt2800usb) -endef - -define KernelPackage/rtl818x/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek Drivers for RTL818x devices - URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187 - DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211 -endef - -define KernelPackage/rtl8180 - $(call KernelPackage/rtl818x/Default) - DEPENDS+= @PCI_SUPPORT - TITLE+= (RTL8180 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8180/rtl818x_pci.ko - AUTOLOAD:=$(call AutoProbe,rtl818x_pci) -endef - -define KernelPackage/rtl8187 -$(call KernelPackage/rtl818x/Default) - DEPENDS+= @USB_SUPPORT +kmod-usb-core - TITLE+= (RTL8187 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8187/rtl8187.ko - AUTOLOAD:=$(call AutoProbe,rtl8187) -endef - -define KernelPackage/rtlwifi/config - config PACKAGE_RTLWIFI_DEBUG - bool "Realtek wireless debugging" - depends on PACKAGE_kmod-rtlwifi - help - Say Y, if you want to debug realtek wireless drivers. - -endef - -define KernelPackage/rtlwifi - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek common driver part - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtlwifi.ko - HIDDEN:=1 -endef - -define KernelPackage/rtlwifi-pci - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek common driver part (PCI support) - DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl_pci.ko - AUTOLOAD:=$(call AutoProbe,rtl_pci) - HIDDEN:=1 -endef - -define KernelPackage/rtlwifi-usb - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek common driver part (USB support) - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl_usb.ko - AUTOLOAD:=$(call AutoProbe,rtl_usb) - HIDDEN:=1 -endef - -define KernelPackage/rtl8192c-common - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192CE/RTL8192CU common support module - DEPENDS+= +kmod-rtlwifi - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192c/rtl8192c-common.ko - HIDDEN:=1 -endef - -define KernelPackage/rtl8192ce - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192CE/RTL8188CE support - DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192ce.ko - AUTOLOAD:=$(call AutoProbe,rtl8192ce) -endef - -define KernelPackage/rtl8192ce/install - $(INSTALL_DIR) $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfw.bin $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfwU.bin $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cfwU_B.bin $(1)/lib/firmware/rtlwifi -endef - -define KernelPackage/rtl8192se - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192SE/RTL8191SE support - DEPENDS+= +kmod-rtlwifi-pci - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192se/rtl8192se.ko - AUTOLOAD:=$(call AutoProbe,rtl8192se) -endef - -define KernelPackage/rtl8192se/install - $(INSTALL_DIR) $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192sefw.bin $(1)/lib/firmware/rtlwifi -endef - -define KernelPackage/rtl8192de - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192DE/RTL8188DE support - DEPENDS+= +kmod-rtlwifi-pci - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko - AUTOLOAD:=$(call AutoProbe,rtl8192de) -endef - -define KernelPackage/rtl8192de/install - $(INSTALL_DIR) $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192defw.bin $(1)/lib/firmware/rtlwifi -endef - -define KernelPackage/rtl8192cu - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192CU/RTL8188CU support - DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rtlwifi/rtl8192cu/rtl8192cu.ko - AUTOLOAD:=$(call AutoProbe,rtl8192cu) -endef - -define KernelPackage/rtl8192cu/install - $(INSTALL_DIR) $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw.bin $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_A.bin $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_B.bin $(1)/lib/firmware/rtlwifi - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rtlwifi/rtl8192cufw_TMSC.bin $(1)/lib/firmware/rtlwifi -endef - -ZD1211FW_NAME:=zd1211-firmware -ZD1211FW_VERSION:=1.4 -define Download/zd1211rw - FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 - URL:=@SF/zd1211/ - MD5SUM:=19f28781d76569af8551c9d11294c870 -endef -$(eval $(call Download,zd1211rw)) - -define KernelPackage/zd1211rw - $(call KernelPackage/mac80211/Default) - TITLE:=Zydas ZD1211 support - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.ko - AUTOLOAD:=$(call AutoProbe,zd1211rw) -endef - define KernelPackage/adm8211 $(call KernelPackage/mac80211/Default) TITLE:=ADMTek 8211 support DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/adm8211.ko + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/admtek/adm8211.ko AUTOLOAD:=$(call AutoProbe,adm8211) endef @@ -516,7 +155,7 @@ define KernelPackage/ath/config bool "Atheros wireless debugging" help Say Y, if you want to debug atheros wireless drivers. - Right now only ath9k makes use of this. + Only ath9k & ath10k make use of this. config PACKAGE_ATH_DFS bool "Enable DFS support" @@ -560,7 +199,7 @@ define KernelPackage/ath9k-common $(call KernelPackage/mac80211/Default) TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc) URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k - DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@KERNEL_RELAY + DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko @@ -586,14 +225,14 @@ define KernelPackage/ath9k/config config ATH9K_SUPPORT_PCOEM bool "Support chips used in PC OEM cards" depends on PACKAGE_kmod-ath9k - + endef define KernelPackage/ath9k-htc $(call KernelPackage/mac80211/Default) TITLE:=Atheros 802.11n USB device support URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k - DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core + DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko AUTOLOAD:=$(call AutoProbe,ath9k_htc) @@ -608,7 +247,7 @@ define KernelPackage/ath10k $(call KernelPackage/mac80211/Default) TITLE:=Atheros 802.11ac wireless cards support URL:=https://wireless.wiki.kernel.org/en/users/Drivers/ath10k - DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT + DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY +ath10k-firmware-qca988x FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko @@ -621,431 +260,6 @@ Atheros IEEE 802.11ac family of chipsets. For now only PCI is supported. endef -define KernelPackage/ath10k/config - if PACKAGE_kmod-ath10k - - config ATH10K_STA_FW - bool "Firmware optimized for STA operation" - default n - help - Use the ath10k firmware optimized for wireless client instead - of access point operation. - - config ATH10K_API2_FW - bool "Firmware optimized for AP operation (v10.1 / API v2)" - default n - depends on !ATH10K_STA_FW - help - Use the ath10k firmware from the 10.1 SDK using API v2 optimized - for access point operation if the default firmware keeps crashing. - - endif -endef - -define KernelPackage/carl9170 - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Atheros AR9170 USB sticks - DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko - AUTOLOAD:=$(call AutoProbe,carl9170) -endef - -define KernelPackage/lib80211 - $(call KernelPackage/mac80211/Default) - TITLE:=802.11 Networking stack - DEPENDS:=+kmod-cfg80211 - FILES:= \ - $(PKG_BUILD_DIR)/net/wireless/lib80211.ko \ - $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \ - $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \ - $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko - AUTOLOAD:=$(call AutoProbe, \ - lib80211 \ - lib80211_crypt_wep \ - lib80211_crypt_ccmp \ - lib80211_crypt_tkip \ - ) -endef - -define KernelPackage/lib80211/description - Kernel modules for 802.11 Networking stack - Includes: - - lib80211 - - lib80211_crypt_wep - - lib80211_crypt_tkip - - lib80211_crytp_ccmp -endef - -define KernelPackage/libertas-usb - $(call KernelPackage/mac80211/Default) - DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT - TITLE:=Marvell 88W8015 Wireless Driver - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.ko - AUTOLOAD:=$(call AutoProbe,libertas usb8xxx) -endef - -define KernelPackage/libertas-sdio - $(call KernelPackage/mac80211/Default) - DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml - TITLE:=Marvell 88W8686 Wireless Driver - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.ko - AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio) -endef - -define KernelPackage/mac80211-hwsim - $(call KernelPackage/mac80211/Default) - TITLE:=mac80211 HW simulation device - DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko - AUTOLOAD:=$(call AutoProbe,mac80211_hwsim) -endef - -define KernelPackage/net-libipw - $(call KernelPackage/mac80211/Default) - TITLE:=libipw for ipw2100 and ipw2200 - DEPENDS:=@PCI_SUPPORT +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.ko - AUTOLOAD:=$(call AutoProbe,libipw) -endef - -define KernelPackage/net-libipw/description - Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200. -endef - -IPW2100_NAME:=ipw2100-fw -IPW2100_VERSION:=1.3 - -define Download/net-ipw2100 - URL:=http://bughost.org/firmware/ - FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz - MD5SUM=46aa75bcda1a00efa841f9707bbbd113 -endef -$(eval $(call Download,net-ipw2100)) - -define KernelPackage/net-ipw2100 - $(call KernelPackage/mac80211/Default) - TITLE:=Intel IPW2100 driver - DEPENDS:=@PCI_SUPPORT +kmod-net-libipw - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.ko - AUTOLOAD:=$(call AutoProbe,ipw2100) -endef - -define KernelPackage/net-ipw2100/description - Kernel support for Intel IPW2100 - Includes: - - ipw2100 -endef - -IPW2200_NAME:=ipw2200-fw -IPW2200_VERSION:=3.1 - -define Download/net-ipw2200 - URL:=http://bughost.org/firmware/ - FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz - MD5SUM=eaba788643c7cc7483dd67ace70f6e99 -endef -$(eval $(call Download,net-ipw2200)) - -define KernelPackage/net-ipw2200 - $(call KernelPackage/mac80211/Default) - TITLE:=Intel IPW2200 driver - DEPENDS:=@PCI_SUPPORT +kmod-net-libipw - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.ko - AUTOLOAD:=$(call AutoProbe,ipw2200) -endef - -define KernelPackage/net-ipw2200/description - Kernel support for Intel IPW2200 - Includes: - - ipw2200 -endef - - -define KernelPackage/net-hermes - $(call KernelPackage/mac80211/Default) - TITLE:=Hermes 802.11b chipset support - DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco.ko - AUTOLOAD:=$(call AutoProbe,orinoco) -endef - -define KernelPackage/net-hermes/description - Kernel support for Hermes 802.11b chipsets -endef - -define KernelPackage/net-hermes-pci - $(call KernelPackage/mac80211/Default) - TITLE:=Intersil Prism 2.5 PCI support - DEPENDS:=@PCI_SUPPORT +kmod-net-hermes - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_pci.ko - AUTOLOAD:=$(call AutoProbe,orinoco_pci) -endef - -define KernelPackage/net-hermes-pci/description - Kernel modules for Intersil Prism 2.5 PCI support -endef - -define KernelPackage/net-hermes-plx - $(call KernelPackage/mac80211/Default) - TITLE:=PLX9052 based PCI adaptor - DEPENDS:=@PCI_SUPPORT +kmod-net-hermes - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_plx.ko - AUTOLOAD:=$(call AutoProbe,orinoco_plx) -endef - -define KernelPackage/net-hermes-plx/description - Kernel modules for Hermes in PLX9052 based PCI adaptors -endef - -define KernelPackage/net-hermes-pcmcia - $(call KernelPackage/mac80211/Default) - TITLE:=Hermes based PCMCIA adaptors - DEPENDS:=@PCMCIA_SUPPORT +kmod-net-hermes @BROKEN - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_cs.ko - AUTOLOAD:=$(call AutoProbe,orinoco_cs) -endef - -define KernelPackage/net-hermes-pcmcia/description - Kernel modules for Hermes based PCMCIA adaptors -endef - -define KernelPackage/iwlagn - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT - TITLE:=Intel AGN Wireless support - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/iwlwifi.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/dvm/iwldvm.ko - AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm) - MENU:=1 -endef - -define KernelPackage/iwlagn/description - iwlagn kernel module for Intel 5000/5150/1000/6000/6050/6005/6030/100 support -endef - -define KernelPackage/iwlagn/config - if PACKAGE_kmod-iwlagn - - config IWL5000_FW - bool "Intel 5000 Firmware" - default y - help - Download and install firmware for: - Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN - - config IWL5150_FW - bool "Intel 5150 Firmware" - default y - help - Download and install firmware for: - Intel Wireless WiFi 5150AGN - - config IWL1000_FW - bool "Intel 1000 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 1000 - - config IWL6000_FW - bool "Intel 6000 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Ultimate-N 6300 and Advanced-N 6200 - - config IWL6050_FW - bool "Intel 6050 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Advanced-N + WiMAX 6250 and Wireless-N + WiMAX 6150 - - config IWL6005_FW - bool "Intel 6005 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Advanced-N 6205 - - config IWL6030_FW - bool "Intel 6030 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Advanced-N 6230, Wireless-N 1030, Wireless-N 130 and Advanced-N 6235 - - config IWL7260_FW - bool "Intel 7260 Firmware" - default y - help - Download and install firmware for: - Intel Dual Band Wireless-N 7260 and Intel Dual Band Wireless-AC 7260 - - config IWL7265_FW - bool "Intel 7265 Firmware" - default y - help - Download and install firmware for: - Intel Wireless 7265 - - config IWL100_FW - bool "Intel 100 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 100 - - config IWL2000_FW - bool "Intel 2000 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 2200 - - config IWL2030_FW - bool "Intel 2030 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 2230 - - config IWL105_FW - bool "Intel 105 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 105 - - config IWL135_FW - bool "Intel 135 Firmware" - default y - help - Download and install firmware for: - Intel Centrino Wireless-N 135 - - config IWL3160_FW - bool "Intel 3160 Firmware" - default y - help - Download and install firmware for: - Intel Wireless 3160 - endif -endef - -define KernelPackage/iwl-legacy - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 @PCI_SUPPORT - TITLE:=Intel legacy Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwlegacy.ko - AUTOLOAD:=$(call AutoProbe,iwlegacy) -endef - -define KernelPackage/iwl-legacy/description - iwl-legacy kernel module for legacy Intel wireless support -endef - -define KernelPackage/iwl3945 - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy - TITLE:=Intel iwl3945 Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl3945.ko - AUTOLOAD:=$(call AutoProbe,iwl3945) -endef - -define KernelPackage/iwl3945/description - iwl3945 kernel module for Intel 3945 support -endef - -define KernelPackage/iwl4965 - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT - TITLE:=Intel iwl4965 Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl4965.ko - AUTOLOAD:=$(call AutoProbe,iwl4965) -endef - -define KernelPackage/iwl4965/description - iwl4965 kernel module for Intel 4965 support -endef - - -define KernelPackage/mwl8k - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards - URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k - DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.ko - AUTOLOAD:=$(call AutoProbe,mwl8k) -endef - -define KernelPackage/mwl8k/description - Kernel modules for Marvell TOPDOG 802.11 Wireless cards -endef - - -define KernelPackage/mwifiex-pcie - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards - URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex - DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex_pcie.ko - AUTOLOAD:=$(call AutoProbe,mwifiex_pcie) -endef - -define KernelPackage/mwifiex-pcie/description - Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards -endef - - -define KernelPackage/wlcore - $(call KernelPackage/mac80211/Default) - TITLE:=TI common driver part - DEPENDS+= @TARGET_omap +kmod-mac80211 +@DRIVER_11N_SUPPORT - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko - AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio) -endef - -define KernelPackage/wlcore/description - This module contains some common parts needed by TI Wireless drivers. -endef - -define KernelPackage/wl12xx - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for TI WL12xx - URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx - DEPENDS+= +kmod-wlcore - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko - AUTOLOAD:=$(call AutoProbe,wl12xx) -endef - -define KernelPackage/wl12xx/description - Kernel modules for TI WL12xx -endef - -define KernelPackage/wl18xx - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for TI WL18xx - URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx - DEPENDS+= +kmod-wlcore - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko - AUTOLOAD:=$(call AutoProbe,wl18xx) -endef - -define KernelPackage/wl18xx/description - Kernel modules for TI WL18xx -endef - - #Broadcom firmware ifneq ($(CONFIG_B43_FW_6_30),) PKG_B43_FWV4_NAME:=broadcom-wl @@ -1099,12 +313,6 @@ ifneq ($(CONFIG_B43_OPENFIRMWARE),) endif -PKG_B43_FWV3_NAME:=wl_apsta -PKG_B43_FWV3_VERSION:=3.130.20.0 -PKG_B43_FWV3_SOURCE:=$(PKG_B43_FWV3_NAME)-$(PKG_B43_FWV3_VERSION).o -PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/ -PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3 - define Download/b43 FILE:=$(PKG_B43_FWV4_SOURCE) URL:=$(PKG_B43_FWV4_SOURCE_URL) @@ -1112,14 +320,6 @@ define Download/b43 endef $(eval $(call Download,b43)) -define Download/b43legacy - FILE:=$(PKG_B43_FWV3_SOURCE) - URL:=$(PKG_B43_FWV3_SOURCE_URL) - MD5SUM:=$(PKG_B43_FWV3_MD5SUM) -endef -$(eval $(call Download,b43legacy)) - - define KernelPackage/b43 $(call KernelPackage/mac80211/Default) TITLE:=Broadcom 43xx wireless support @@ -1131,7 +331,7 @@ define KernelPackage/b43 @PCI_SUPPORT +kmod-mac80211 \ $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \ $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.ko + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko AUTOLOAD:=$(call AutoProbe,b43) MENU:=1 endef @@ -1370,41 +570,12 @@ define KernelPackage/b43legacy URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 KCONFIG:= \ CONFIG_HW_RANDOM=y - DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.ko + DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko AUTOLOAD:=$(call AutoProbe,b43legacy) MENU:=1 endef -define KernelPackage/b43legacy/config - if PACKAGE_kmod-b43legacy - - config B43LEGACY_FW_SQUASH - bool "Remove unnecessary firmware files" - default y - help - This options allows you to remove unnecessary b43legacy firmware files - from the final rootfs image. This can reduce the rootfs size by - up to 50k. - - If unsure, say Y. - - config B43LEGACY_FW_SQUASH_COREREVS - string "Core revisions to include" - depends on B43LEGACY_FW_SQUASH - default "1,2,3,4" - help - This is a comma seperated list of core revision numbers. - - Example (keep files for rev4 only): - 4 - - Example (keep files for rev2 and rev4): - 2,4 - - endif -endef - define KernelPackage/b43legacy/description Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new endef @@ -1415,7 +586,7 @@ define KernelPackage/brcmutil TITLE:=Broadcom IEEE802.11n common driver parts URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 DEPENDS+=@PCI_SUPPORT||USB_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko AUTOLOAD:=$(call AutoProbe,brcmutil) MENU:=1 endef @@ -1453,8 +624,8 @@ define KernelPackage/brcmsmac $(call KernelPackage/mac80211/Default) TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 - DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko + DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko AUTOLOAD:=$(call AutoProbe,brcmsmac) MENU:=1 endef @@ -1485,8 +656,11 @@ define KernelPackage/brcmfmac $(call KernelPackage/mac80211/Default) TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 - DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil +BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_USB:kmod-usb-core - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko + DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil \ + +BRCMFMAC_PCIE:brcmfmac-firmware-pcie \ + +BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_SDIO:brcmfmac-firmware-sdio \ + +BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko AUTOLOAD:=$(call AutoProbe,brcmfmac) endef @@ -1526,6 +700,743 @@ define KernelPackage/brcmfmac/config endif endef + +define KernelPackage/carl9170 + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for Atheros AR9170 USB sticks + DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko + AUTOLOAD:=$(call AutoProbe,carl9170) +endef + + +define KernelPackage/hermes + $(call KernelPackage/mac80211/Default) + TITLE:=Hermes 802.11b chipset support + DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT +kmod-crypto-michael-mic + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco.ko + AUTOLOAD:=$(call AutoProbe,orinoco) +endef + +define KernelPackage/hermes/description + Kernel support for Hermes 802.11b chipsets +endef + +define KernelPackage/hermes-pci + $(call KernelPackage/mac80211/Default) + TITLE:=Intersil Prism 2.5 PCI support + DEPENDS:=@PCI_SUPPORT +kmod-hermes + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_pci.ko + AUTOLOAD:=$(call AutoProbe,orinoco_pci) +endef + +define KernelPackage/hermes-pci/description + Kernel modules for Intersil Prism 2.5 PCI support +endef + +define KernelPackage/hermes-plx + $(call KernelPackage/mac80211/Default) + TITLE:=PLX9052 based PCI adaptor + DEPENDS:=@PCI_SUPPORT +kmod-hermes + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_plx.ko + AUTOLOAD:=$(call AutoProbe,orinoco_plx) +endef + +define KernelPackage/hermes-plx/description + Kernel modules for Hermes in PLX9052 based PCI adaptors +endef + +define KernelPackage/hermes-pcmcia + $(call KernelPackage/mac80211/Default) + TITLE:=Hermes based PCMCIA adaptors + DEPENDS:=@PCMCIA_SUPPORT +kmod-hermes @BROKEN + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_cs.ko + AUTOLOAD:=$(call AutoProbe,orinoco_cs) +endef + +define KernelPackage/hermes-pcmcia/description + Kernel modules for Hermes based PCMCIA adaptors +endef + + +define KernelPackage/iwlwifi + $(call KernelPackage/mac80211/Default) + DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT +iwlwifi-firmware + TITLE:=Intel AGN Wireless support + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko + AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm) + MENU:=1 +endef + +define KernelPackage/iwlwifi/description + iwlwifi kernel module for + Intel Wireless WiFi Link 6250AGN Adapter + Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) + Intel WiFi Link 1000BGN + Intel Wireless WiFi 5150AGN + Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN + Intel 6005 Series Wi-Fi Adapters + Intel 6030 Series Wi-Fi Adapters + Intel Wireless WiFi Link 6150BGN 2 Adapter + Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) + Intel 2000 Series Wi-Fi Adapters + Intel 7260 Wi-Fi Adapter + Intel 3160 Wi-Fi Adapter + Intel 7265 Wi-Fi Adapter + Intel 8260 Wi-Fi Adapter + Intel 3165 Wi-Fi Adapter +endef + +define KernelPackage/iwlwifi/config + if PACKAGE_kmod-iwlwifi + + config PACKAGE_IWLWIFI_DEBUG + bool "Enable full debugging output in the iwlwifi driver" + default n + help + This option will enable debug tracing output for the iwlwifi drivers + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/module/iwlwifi/parameters/debug + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x43fff > /sys/module/iwlwifi/parameters/debug + + You can find the list of debug mask values in: + drivers/net/wireless/intel/iwlwifi/iwl-debug.h + + If this is your first time using this driver, you should say Y here + as the debug information can assist others in helping you resolve + any problems you may encounter. + + config PACKAGE_IWLWIFI_DEBUGFS + bool "iwlwifi debugfs support" + depends on PACKAGE_MAC80211_DEBUGFS + default n + help + Enable creation of debugfs files for the iwlwifi drivers. This + is a low-impact option that allows getting insight into the + driver's state at runtime. + + endif +endef + +define KernelPackage/iwl-legacy + $(call KernelPackage/mac80211/Default) + DEPENDS:= +kmod-mac80211 @PCI_SUPPORT + TITLE:=Intel legacy Wireless support + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwlegacy.ko + AUTOLOAD:=$(call AutoProbe,iwlegacy) +endef + +define KernelPackage/iwl-legacy/description + iwl-legacy kernel module for legacy Intel wireless support +endef + +define KernelPackage/iwl3945 + $(call KernelPackage/mac80211/Default) + DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +iwl3945-firmware + TITLE:=Intel iwl3945 Wireless support + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl3945.ko + AUTOLOAD:=$(call AutoProbe,iwl3945) +endef + +define KernelPackage/iwl3945/description + iwl3945 kernel module for Intel 3945 support +endef + +define KernelPackage/iwl4965 + $(call KernelPackage/mac80211/Default) + DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT +iwl4965-firmware + TITLE:=Intel iwl4965 Wireless support + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl4965.ko + AUTOLOAD:=$(call AutoProbe,iwl4965) +endef + +define KernelPackage/iwl4965/description + iwl4965 kernel module for Intel 4965 support +endef + + +define KernelPackage/lib80211 + $(call KernelPackage/mac80211/Default) + TITLE:=802.11 Networking stack + DEPENDS:=+kmod-cfg80211 + FILES:= \ + $(PKG_BUILD_DIR)/net/wireless/lib80211.ko \ + $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \ + $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \ + $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko + AUTOLOAD:=$(call AutoProbe, \ + lib80211 \ + lib80211_crypt_wep \ + lib80211_crypt_ccmp \ + lib80211_crypt_tkip \ + ) +endef + +define KernelPackage/lib80211/description + Kernel modules for 802.11 Networking stack + Includes: + - lib80211 + - lib80211_crypt_wep + - lib80211_crypt_tkip + - lib80211_crytp_ccmp +endef + + +define KernelPackage/libipw + $(call KernelPackage/mac80211/Default) + TITLE:=libipw for ipw2100 and ipw2200 + DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-crypto-core +kmod-crypto-arc4 +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko + AUTOLOAD:=$(call AutoProbe,libipw) +endef + +define KernelPackage/libipw/description + Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200. +endef + +IPW2100_NAME:=ipw2100-fw +IPW2100_VERSION:=1.3 + +define Download/ipw2100 + URL:=http://bughost.org/firmware/ + FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz + MD5SUM=46aa75bcda1a00efa841f9707bbbd113 +endef +$(eval $(call Download,ipw2100)) + +define KernelPackage/ipw2100 + $(call KernelPackage/mac80211/Default) + TITLE:=Intel IPW2100 driver + DEPENDS:=@PCI_SUPPORT +kmod-libipw + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2100.ko + AUTOLOAD:=$(call AutoProbe,ipw2100) +endef + +define KernelPackage/ipw2100/description + Kernel support for Intel IPW2100 + Includes: + - ipw2100 +endef + +IPW2200_NAME:=ipw2200-fw +IPW2200_VERSION:=3.1 + +define Download/ipw2200 + URL:=http://bughost.org/firmware/ + FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz + MD5SUM=eaba788643c7cc7483dd67ace70f6e99 +endef +$(eval $(call Download,ipw2200)) + +define KernelPackage/ipw2200 + $(call KernelPackage/mac80211/Default) + TITLE:=Intel IPW2200 driver + DEPENDS:=@PCI_SUPPORT +kmod-libipw + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2200.ko + AUTOLOAD:=$(call AutoProbe,ipw2200) +endef + +define KernelPackage/ipw2200/description + Kernel support for Intel IPW2200 + Includes: + - ipw2200 +endef + + +define KernelPackage/libertas-usb + $(call KernelPackage/mac80211/Default) + DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware + TITLE:=Marvell 88W8015 Wireless Driver + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/usb8xxx.ko + AUTOLOAD:=$(call AutoProbe,libertas usb8xxx) +endef + +define KernelPackage/libertas-sdio + $(call KernelPackage/mac80211/Default) + DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware + TITLE:=Marvell 88W8686 Wireless Driver + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_sdio.ko + AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio) +endef + +define KernelPackage/libertas-spi + $(call KernelPackage/mac80211/Default) + SUBMENU:=Wireless Drivers + DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-spi-firmware + KCONFIG := \ + CONFIG_SPI=y \ + CONFIG_SPI_MASTER=y + TITLE:=Marvell 88W8686 SPI Wireless Driver + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_spi.ko + AUTOLOAD:=$(call AutoProbe,libertas libertas_spi) +endef + +define KernelPackage/mac80211-hwsim + $(call KernelPackage/mac80211/Default) + TITLE:=mac80211 HW simulation device + DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko + AUTOLOAD:=$(call AutoProbe,mac80211_hwsim) +endef + + +define KernelPackage/mt7601u + $(call KernelPackage/mac80211/Default) + TITLE:=MT7601U-based USB dongles Wireless Driver + DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT @USB_SUPPORT +kmod-usb-core +mt7601u-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mediatek/mt7601u/mt7601u.ko + AUTOLOAD:=$(call AutoProbe,mt7601u) +endef + + +define KernelPackage/mwl8k + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards + URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k + DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwl8k-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwl8k.ko + AUTOLOAD:=$(call AutoProbe,mwl8k) +endef + +define KernelPackage/mwl8k/description + Kernel modules for Marvell TOPDOG 802.11 Wireless cards +endef + + +define KernelPackage/mwifiex-pcie + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards + URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex + DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwifiex-pcie-firmware + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko + AUTOLOAD:=$(call AutoProbe,mwifiex_pcie) +endef + +define KernelPackage/mwifiex-pcie/description + Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards +endef + + +# Prism54 drivers +P54PCIFW:=2.13.12.0.arm +P54USBFW:=2.13.24.0.lm87.arm +P54SPIFW:=2.13.0.0.a.13.14.arm + +define Download/p54usb + FILE:=$(P54USBFW) + URL:=http://daemonizer.de/prism54/prism54-fw/fw-usb + MD5SUM:=8e8ab005a4f8f0123bcdc51bc25b47f6 +endef +$(eval $(call Download,p54usb)) + +define Download/p54pci + FILE:=$(P54PCIFW) + URL:=http://daemonizer.de/prism54/prism54-fw/fw-softmac + MD5SUM:=ff7536af2092b1c4b21315bd103ef4c4 +endef +$(eval $(call Download,p54pci)) + +define Download/p54spi + FILE:=$(P54SPIFW) + URL:=http://daemonizer.de/prism54/prism54-fw/stlc4560 + MD5SUM:=42661f8ecbadd88012807493f596081d +endef +$(eval $(call Download,p54spi)) + +define KernelPackage/p54/Default + $(call KernelPackage/mac80211/Default) + TITLE:=Prism54 Drivers +endef + +define KernelPackage/p54/description + Kernel module for Prism54 chipsets (mac80211) +endef + +define KernelPackage/p54-common + $(call KernelPackage/p54/Default) + DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt + TITLE+= (COMMON) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54common.ko +endef + +define KernelPackage/p54-pci + $(call KernelPackage/p54/Default) + TITLE+= (PCI) + DEPENDS+= @PCI_SUPPORT +kmod-p54-common + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54pci.ko + AUTOLOAD:=$(call AutoProbe,p54pci) +endef + +define KernelPackage/p54-usb + $(call KernelPackage/p54/Default) + TITLE+= (USB) + DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54usb.ko + AUTOLOAD:=$(call AutoProbe,p54usb) +endef + +define KernelPackage/p54-spi + $(call KernelPackage/p54/Default) + TITLE+= (SPI) + DEPENDS+= @TARGET_omap24xx +kmod-p54-common + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54spi.ko + AUTOLOAD:=$(call AutoProbe,p54spi) +endef + +define KernelPackage/rt2x00/Default + $(call KernelPackage/mac80211/Default) + TITLE:=Ralink Drivers for RT2x00 cards +endef + +define KernelPackage/rt2x00-lib +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t + TITLE+= (LIB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko + MENU:=1 +endef + +define KernelPackage/rt2x00-lib/config + if PACKAGE_kmod-rt2x00-lib + + config PACKAGE_RT2X00_LIB_DEBUGFS + bool "Enable rt2x00 debugfs support" + depends on PACKAGE_MAC80211_DEBUGFS + help + Enable creation of debugfs files for the rt2x00 drivers. + These debugfs files support both reading and writing of the + most important register types of the rt2x00 hardware. + + config PACKAGE_RT2X00_DEBUG + bool "Enable rt2x00 debug output" + help + Enable debugging output for all rt2x00 modules + + endif +endef + +define KernelPackage/rt2x00-mmio +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 + HIDDEN:=1 + TITLE+= (MMIO) + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko +endef + +define KernelPackage/rt2x00-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib + HIDDEN:=1 + TITLE+= (PCI) + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko + AUTOLOAD:=$(call AutoProbe,rt2x00pci) +endef + +define KernelPackage/rt2x00-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core + HIDDEN:=1 + TITLE+= (USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko + AUTOLOAD:=$(call AutoProbe,rt2x00usb) +endef + +define KernelPackage/rt2800-lib +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT + HIDDEN:=1 + TITLE+= (rt2800 LIB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko +endef + +define KernelPackage/rt2400-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci + TITLE+= (RT2400 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko + AUTOLOAD:=$(call AutoProbe,rt2400pci) +endef + +define KernelPackage/rt2500-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci + TITLE+= (RT2500 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko + AUTOLOAD:=$(call AutoProbe,rt2500pci) +endef + +define KernelPackage/rt2500-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb + TITLE+= (RT2500 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko + AUTOLOAD:=$(call AutoProbe,rt2500usb) +endef + +define KernelPackage/rt2800-mmio +$(call KernelPackage/rt2x00/Default) + TITLE += (RT28xx/RT3xxx MMIO) + DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio + HIDDEN:=1 + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko +endef + +define KernelPackage/rt2800-soc +$(call KernelPackage/rt2x00/Default) + DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib + TITLE += (RT28xx/RT3xxx SoC) + FILES := \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko + AUTOLOAD:=$(call AutoProbe,rt2800soc) +endef + +define KernelPackage/rt2800-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware + TITLE+= (RT2860 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko + AUTOLOAD:=$(call AutoProbe,rt2800pci) +endef + +define KernelPackage/rt2800-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware + TITLE+= (RT2870 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko + AUTOLOAD:=$(call AutoProbe,rt2800usb) +endef + + +define KernelPackage/rt61-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware + TITLE+= (RT2x61 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko + AUTOLOAD:=$(call AutoProbe,rt61pci) +endef + +define KernelPackage/rt73-usb + $(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware + TITLE+= (RT73 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko + AUTOLOAD:=$(call AutoProbe,rt73usb) +endef + + +define KernelPackage/rtl818x/Default + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek Drivers for RTL818x devices + URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187 + DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211 +endef + +define KernelPackage/rtl8180 + $(call KernelPackage/rtl818x/Default) + DEPENDS+= @PCI_SUPPORT + TITLE+= (RTL8180 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl818x_pci.ko + AUTOLOAD:=$(call AutoProbe,rtl818x_pci) +endef + +define KernelPackage/rtl8187 +$(call KernelPackage/rtl818x/Default) + DEPENDS+= @USB_SUPPORT +kmod-usb-core + TITLE+= (RTL8187 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko + AUTOLOAD:=$(call AutoProbe,rtl8187) +endef + +define KernelPackage/rtlwifi/config + config PACKAGE_RTLWIFI_DEBUG + bool "Realtek wireless debugging" + depends on PACKAGE_kmod-rtlwifi + help + Say Y, if you want to debug realtek wireless drivers. + +endef + +define KernelPackage/rtlwifi + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek common driver part + DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko + HIDDEN:=1 +endef + +define KernelPackage/rtlwifi-pci + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek common driver part (PCI support) + DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_pci.ko + AUTOLOAD:=$(call AutoProbe,rtl_pci) + HIDDEN:=1 +endef + +define KernelPackage/rtlwifi-usb + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek common driver part (USB support) + DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko + AUTOLOAD:=$(call AutoProbe,rtl_usb) + HIDDEN:=1 +endef + +define KernelPackage/rtl8192c-common + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192CE/RTL8192CU common support module + DEPENDS+= +kmod-rtlwifi + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko + HIDDEN:=1 +endef + +define KernelPackage/rtl8192ce + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192CE/RTL8188CE support + DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common +rtl8192ce-firmware + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rtl8192ce.ko + AUTOLOAD:=$(call AutoProbe,rtl8192ce) +endef + +define KernelPackage/rtl8192se + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192SE/RTL8191SE support + DEPENDS+= +kmod-rtlwifi-pci +rtl8192se-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rtl8192se.ko + AUTOLOAD:=$(call AutoProbe,rtl8192se) +endef + +define KernelPackage/rtl8192de + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192DE/RTL8188DE support + DEPENDS+= +kmod-rtlwifi-pci +rtl8192de-firmware + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rtl8192de.ko + AUTOLOAD:=$(call AutoProbe,rtl8192de) +endef + +define KernelPackage/rtl8192cu + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192CU/RTL8188CU support + DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common +rtl8192cu-firmware + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko + AUTOLOAD:=$(call AutoProbe,rtl8192cu) +endef + + +define KernelPackage/rtl8xxxu + $(call KernelPackage/mac80211/Default) + TITLE:=alternative Realtek RTL8XXXU support + DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko + AUTOLOAD:=$(call AutoProbe,rtl8xxxu) +endef + +define KernelPackage/rtl8xxxu/description + This is an alternative driver for various Realtek RTL8XXX + parts written to utilize the Linux mac80211 stack. + The driver is known to work with a number of RTL8723AU, + RL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU devices + + This driver is under development and has a limited feature + set. In particular it does not yet support 40MHz channels + and power management. However it should have a smaller + memory footprint than the vendor drivers and benetifs + from the in kernel mac80211 stack. + + It can coexist with drivers from drivers/staging/rtl8723au, + drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi, + but you will need to control which module you wish to load. + + RTL8XXXU_UNTESTED is enabled + This option enables detection of Realtek 8723/8188/8191/8192 WiFi + USB devices which have not been tested directly by the driver + author or reported to be working by third parties. + + Please report your results! +endef + + +define KernelPackage/wlcore + $(call KernelPackage/mac80211/Default) + TITLE:=TI common driver part + DEPENDS+= @TARGET_omap +kmod-mac80211 +@DRIVER_11N_SUPPORT + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko + AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio) +endef + +define KernelPackage/wlcore/description + This module contains some common parts needed by TI Wireless drivers. +endef + +define KernelPackage/wl12xx + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for TI WL12xx + URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx + DEPENDS+= +kmod-wlcore +wl12xx-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko + AUTOLOAD:=$(call AutoProbe,wl12xx) +endef + +define KernelPackage/wl12xx/description + Kernel modules for TI WL12xx +endef + +define KernelPackage/wl18xx + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for TI WL18xx + URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx + DEPENDS+= +kmod-wlcore +wl18xx-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko + AUTOLOAD:=$(call AutoProbe,wl18xx) +endef + +define KernelPackage/wl18xx/description + Kernel modules for TI WL18xx +endef + + +ZD1211FW_NAME:=zd1211-firmware +ZD1211FW_VERSION:=1.4 +define Download/zd1211rw + FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 + URL:=@SF/zd1211/ + MD5SUM:=19f28781d76569af8551c9d11294c870 +endef +$(eval $(call Download,zd1211rw)) + +define KernelPackage/zd1211rw + $(call KernelPackage/mac80211/Default) + TITLE:=Zydas ZD1211 support + DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zydas/zd1211rw/zd1211rw.ko + AUTOLOAD:=$(call AutoProbe,zd1211rw) +endef + + + config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) config-y:= \ @@ -1538,6 +1449,20 @@ config-y:= \ MAC80211_RC_MINSTREL_HT \ MAC80211_RC_MINSTREL_VHT \ MAC80211_RC_DEFAULT_MINSTREL \ + WLAN_VENDOR_ADMTEK \ + WLAN_VENDOR_ATH \ + WLAN_VENDOR_ATMEL \ + WLAN_VENDOR_BROADCOM \ + WLAN_VENDOR_INTEL \ + WLAN_VENDOR_INTERSIL \ + WLAN_VENDOR_MARVELL \ + WLAN_VENDOR_MEDIATEK \ + WLAN_VENDOR_RALINK \ + WLAN_VENDOR_REALTEK \ + WLAN_VENDOR_RSI \ + WLAN_VENDOR_ST \ + WLAN_VENDOR_TI \ + WLAN_VENDOR_ZYDAS \ config-$(call config_package,cfg80211) += CFG80211 @@ -1554,6 +1479,16 @@ ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS ATH5K_DEBUG endif +ifdef CONFIG_PACKAGE_MAC80211_TRACING + config-y += \ + ATH10K_TRACING \ + ATH6KL_TRACING \ + ATH_TRACEPOINTS \ + WIL6210_TRACING \ + ATH5K_TRACER \ + IWLWIFI_DEVICE_TRACING +endif + config-$(call config_package,lib80211) += LIB80211 LIB80211_CRYPT_WEP LIB80211_CRYPT_CCMP LIB80211_CRYPT_TKIP config-$(call config_package,ath) += ATH_CARDS ATH_COMMON @@ -1602,6 +1537,8 @@ config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM +config-$(call config_package,mt7601u) += MT7601U +config-y += WL_MEDIATEK config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI @@ -1623,31 +1560,34 @@ config-$(call config_package,rt2800-pci) += RT2800PCI config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290 config-$(call config_package,rt2800-usb) += RT2800USB -config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX +config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN config-$(call config_package,iwl-legacy) += IWLEGACY config-$(call config_package,iwl3945) += IWL3945 config-$(call config_package,iwl4965) += IWL4965 -config-$(call config_package,iwlagn) += IWLWIFI IWLDVM +config-$(call config_package,iwlwifi) += IWLWIFI IWLDVM IWLMVM +config-$(CONFIG_PACKAGE_IWLWIFI_DEBUG)+= IWLWIFI_DEBUG +config-$(CONFIG_PACKAGE_IWLWIFI_DEBUGFS)+= IWLWIFI_DEBUGFS -config-$(call config_package,net-libipw) += LIBIPW -config-$(call config_package,net-ipw2100) += IPW2100 -config-$(call config_package,net-ipw2200) += IPW2200 +config-$(call config_package,libipw) += LIBIPW +config-$(call config_package,ipw2100) += IPW2100 +config-$(call config_package,ipw2200) += IPW2200 config-$(call config_package,p54-common) += P54_COMMON config-$(call config_package,p54-pci) += P54_PCI config-$(call config_package,p54-usb) += P54_USB config-$(call config_package,p54-spi) += P54_SPI -config-$(call config_package,net-hermes) += HERMES -config-$(call config_package,net-hermes-pci) += PCI_HERMES -config-$(call config_package,net-hermes-plx) += PLX_HERMES -config-$(call config_package,net-hermes-pcmcia) += PCMCIA_HERMES +config-$(call config_package,hermes) += HERMES +config-$(call config_package,hermes-pci) += PCI_HERMES +config-$(call config_package,hermes-plx) += PLX_HERMES +config-$(call config_package,hermes-pcmcia) += PCMCIA_HERMES config-y += HERMES_PRISM config-$(call config_package,adm8211) += ADM8211 config-$(call config_package,libertas-sdio) += LIBERTAS LIBERTAS_SDIO config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB +config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI config-$(call config_package,mwl8k) += MWL8K config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE config-$(call config_package,rtl8180) += RTL8180 @@ -1668,12 +1608,15 @@ config-$(call config_package,rtl8192de) += RTL8192DE config-$(call config_package,rtl8192cu) += RTL8192CU config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG +config-$(call config_package,rtl8xxxu) += RTL8XXXU +config-y += RTL8XXXU_UNTESTED + config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \ CROSS_COMPILE="$(KERNEL_CROSS)" \ ARCH="$(LINUX_KARCH)" \ - EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include" \ + EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS)" \ KLIB_BUILD="$(LINUX_DIR)" \ MODPROBE=true \ KLIB=$(TARGET_MODULES_DIR) \ @@ -1702,8 +1645,6 @@ define Build/Prepare $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2100_NAME)-$(IPW2100_VERSION).tgz $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION).tgz $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2 - $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_LINUX_FIRMWARE_SOURCE) - $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE) rm -rf \ $(PKG_BUILD_DIR)/include/linux/ssb \ $(PKG_BUILD_DIR)/include/linux/bcma \ @@ -1715,7 +1656,8 @@ define Build/Prepare $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \ $(PKG_BUILD_DIR)/include/linux/wl12xx.h \ $(PKG_BUILD_DIR)/include/linux/spi/libertas_spi.h \ - $(PKG_BUILD_DIR)/include/net/ieee80211.h + $(PKG_BUILD_DIR)/include/net/ieee80211.h \ + $(PKG_BUILD_DIR)/backport-include/linux/bcm47xx_nvram.h echo 'compat-wireless-$(PKG_VERSION)-$(PKG_RELEASE)-$(REVISION)' > $(PKG_BUILD_DIR)/compat_version $(CP) ./files/regdb.txt $(PKG_BUILD_DIR)/net/wireless/db.txt @@ -1753,220 +1695,6 @@ define Build/InstallDev rm -f $(1)/usr/include/mac80211-backport/linux/module.h endef -define KernelPackage/libertas-usb/install - $(INSTALL_DIR) $(1)/lib/firmware/libertas - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8388_v9.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/usb8682.bin \ - $(1)/lib/firmware/libertas/ -endef - -define KernelPackage/libertas-sdio/install - $(INSTALL_DIR) $(1)/lib/firmware/libertas - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385_helper.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8385.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9_helper.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8686_v9.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688_helper.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/libertas/sd8688.bin \ - $(1)/lib/firmware/libertas -endef - -define KernelPackage/cfg80211/install - $(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless - $(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi - $(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless -endef - -define KernelPackage/p54-pci/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(DL_DIR)/$(P54PCIFW) $(1)/lib/firmware/isl3886pci -endef - -define KernelPackage/p54-usb/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(DL_DIR)/$(P54USBFW) $(1)/lib/firmware/isl3887usb -endef - -define KernelPackage/p54-spi/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(DL_DIR)/$(P54SPIFW) $(1)/lib/firmware/3826.arm -endef - -define KernelPackage/rt61-pci/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2561s.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2661.bin \ - $(1)/lib/firmware/ -endef - -define KernelPackage/rt73-usb/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt73.bin $(1)/lib/firmware/ -endef - -define KernelPackage/rt2800-pci/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2860.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt3290.bin \ - $(1)/lib/firmware -endef - -define KernelPackage/rt2800-usb/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/rt2870.bin $(1)/lib/firmware/ -endef - -define KernelPackage/wl12xx/install - $(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-mr.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-plt.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl127x-fw-5-sr.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl1271-nvs.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-mr.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-plt.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-fw-5-sr.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl128x-nvs.bin \ - $(1)/lib/firmware/ti-connectivity -endef - -define KernelPackage/wl18xx/install - $(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-conf.bin \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-fw-3.bin \ - $(1)/lib/firmware/ti-connectivity -endef - -define KernelPackage/zd1211rw/install - $(INSTALL_DIR) $(1)/lib/firmware/zd1211 - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211 -endef - -define KernelPackage/carl9170/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/carl9170-1.fw $(1)/lib/firmware -endef - -define KernelPackage/ath9k-htc/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_9271.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/htc_7010.fw \ - $(1)/lib/firmware/ -endef - -define KernelPackage/ath10k/install - $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0 - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/ath10k/QCA988X/hw2.0/board.bin \ - $(1)/lib/firmware/ath10k/QCA988X/hw2.0/ -ifeq ($(CONFIG_ATH10K_STA_FW),y) - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/main/firmware-2.bin_999.999.0.636 \ - $(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin -else ifeq ($(CONFIG_ATH10K_API2_FW),y) - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/10.1/firmware-2.bin_10.1.467.2-1 \ - $(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-2.bin -else - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SUBDIR)/10.2.4/firmware-4.bin_10.2.4.45 \ - $(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-4.bin -endif -endef - -define KernelPackage/mwl8k/install - $(INSTALL_DIR) $(1)/lib/firmware/mwl8k - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366_ap-3.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8366.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8366.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/fmimage_8687.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mwl8k/helper_8687.fw \ - $(1)/lib/firmware/mwl8k/ -endef - -define KernelPackage/mwifiex-pcie/install - $(INSTALL_DIR) $(1)/lib/firmware/mrvl - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/mrvl/pcie8897_uapsta.bin \ - $(1)/lib/firmware/mrvl/ -endef - -define KernelPackage/net-ipw2100/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware -endef - -define KernelPackage/net-ipw2200/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware -endef - -define KernelPackage/iwlagn/install - $(INSTALL_DIR) $(1)/lib/firmware -ifneq ($(CONFIG_IWL5000_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5000-5.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL5150_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-5150-2.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL1000_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-1000-5.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL6000_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000-4.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL6050_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6050-5.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL6005_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2a-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL6030_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-6000g2b-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL7260_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7260-9.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL7265_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-7265-9.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL100_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-100-5.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL2000_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2000-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL2030_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-2030-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL105_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-105-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL135_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-135-6.ucode $(1)/lib/firmware -endif -ifneq ($(CONFIG_IWL3160_FW),) - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3160-9.ucode $(1)/lib/firmware -endif -endef - -define KernelPackage/iwl3945/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-3945-2.ucode $(1)/lib/firmware -endef - -define KernelPackage/iwl4965/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/iwlwifi-4965-2.ucode $(1)/lib/firmware -endef define KernelPackage/b43/install rm -rf $(1)/lib/firmware/ @@ -1990,51 +1718,85 @@ ifneq ($(CONFIG_B43_FW_SQUASH),) endif endef -define KernelPackage/b43legacy/install - $(INSTALL_DIR) $(1)/lib/firmware/ - b43-fwcutter --unsupported -w $(1)/lib/firmware/ $(DL_DIR)/$(PKG_B43_FWV3_SOURCE) -ifneq ($(CONFIG_B43LEGACY_FW_SQUASH),) - b43-fwsquash.py "G" "$(CONFIG_B43LEGACY_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43legacy" -endif -endef - define KernelPackage/brcmsmac/install $(INSTALL_DIR) $(1)/lib/firmware/brcm ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y) tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)" b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT) -else - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/bcm43xx-0.fw \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/bcm43xx_hdr-0.fw \ - $(1)/lib/firmware/brcm/ endif endef -define KernelPackage/brcmfmac/install - $(INSTALL_DIR) $(1)/lib/firmware/brcm -ifneq ($(CONFIG_BRCMFMAC_USB),) - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43236b.bin \ - $(1)/lib/firmware/brcm/ - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43143.bin \ - $(1)/lib/firmware/brcm/ -endif -ifneq ($(CONFIG_BRCMFMAC_PCIE),) - $(INSTALL_DATA) \ - $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/brcmfmac43602-pcie.ap.bin \ - $(1)/lib/firmware/brcm/brcmfmac43602-pcie.bin -endif +define KernelPackage/cfg80211/install + $(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless + $(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi + $(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless +endef + +define KernelPackage/ipw2100/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware +endef + +define KernelPackage/ipw2200/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware endef +define KernelPackage/p54-pci/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(DL_DIR)/$(P54PCIFW) $(1)/lib/firmware/isl3886pci +endef + +define KernelPackage/p54-usb/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(DL_DIR)/$(P54USBFW) $(1)/lib/firmware/isl3887usb +endef + +define KernelPackage/p54-spi/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(DL_DIR)/$(P54SPIFW) $(1)/lib/firmware/3826.arm +endef + +define KernelPackage/zd1211rw/install + $(INSTALL_DIR) $(1)/lib/firmware/zd1211 + $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211 +endef + + $(eval $(call KernelPackage,adm8211)) +$(eval $(call KernelPackage,ath)) +$(eval $(call KernelPackage,ath10k)) $(eval $(call KernelPackage,ath5k)) +$(eval $(call KernelPackage,ath9k)) +$(eval $(call KernelPackage,ath9k-common)) +$(eval $(call KernelPackage,ath9k-htc)) +$(eval $(call KernelPackage,b43)) +$(eval $(call KernelPackage,b43legacy)) +$(eval $(call KernelPackage,brcmsmac)) +$(eval $(call KernelPackage,brcmfmac)) +$(eval $(call KernelPackage,brcmutil)) +$(eval $(call KernelPackage,carl9170)) +$(eval $(call KernelPackage,cfg80211)) +$(eval $(call KernelPackage,hermes)) +$(eval $(call KernelPackage,hermes-pci)) +$(eval $(call KernelPackage,hermes-plx)) +$(eval $(call KernelPackage,hermes-pcmcia)) +$(eval $(call KernelPackage,iwlwifi)) +$(eval $(call KernelPackage,iwl-legacy)) +$(eval $(call KernelPackage,iwl4965)) +$(eval $(call KernelPackage,iwl3945)) $(eval $(call KernelPackage,lib80211)) $(eval $(call KernelPackage,libertas-usb)) $(eval $(call KernelPackage,libertas-sdio)) -$(eval $(call KernelPackage,cfg80211)) +$(eval $(call KernelPackage,libertas-spi)) +$(eval $(call KernelPackage,libipw)) +$(eval $(call KernelPackage,ipw2100)) +$(eval $(call KernelPackage,ipw2200)) $(eval $(call KernelPackage,mac80211)) +$(eval $(call KernelPackage,mac80211-hwsim)) +$(eval $(call KernelPackage,mt7601u)) +$(eval $(call KernelPackage,mwl8k)) +$(eval $(call KernelPackage,mwifiex-pcie)) $(eval $(call KernelPackage,p54-common)) $(eval $(call KernelPackage,p54-pci)) $(eval $(call KernelPackage,p54-usb)) @@ -2047,12 +1809,12 @@ $(eval $(call KernelPackage,rt2800-lib)) $(eval $(call KernelPackage,rt2400-pci)) $(eval $(call KernelPackage,rt2500-pci)) $(eval $(call KernelPackage,rt2500-usb)) -$(eval $(call KernelPackage,rt61-pci)) -$(eval $(call KernelPackage,rt73-usb)) $(eval $(call KernelPackage,rt2800-mmio)) $(eval $(call KernelPackage,rt2800-soc)) $(eval $(call KernelPackage,rt2800-pci)) $(eval $(call KernelPackage,rt2800-usb)) +$(eval $(call KernelPackage,rt61-pci)) +$(eval $(call KernelPackage,rt73-usb)) $(eval $(call KernelPackage,rtl8180)) $(eval $(call KernelPackage,rtl8187)) $(eval $(call KernelPackage,rtlwifi)) @@ -2063,32 +1825,8 @@ $(eval $(call KernelPackage,rtl8192ce)) $(eval $(call KernelPackage,rtl8192se)) $(eval $(call KernelPackage,rtl8192de)) $(eval $(call KernelPackage,rtl8192cu)) -$(eval $(call KernelPackage,zd1211rw)) -$(eval $(call KernelPackage,mac80211-hwsim)) -$(eval $(call KernelPackage,ath9k-common)) -$(eval $(call KernelPackage,ath9k)) -$(eval $(call KernelPackage,ath9k-htc)) -$(eval $(call KernelPackage,ath10k)) -$(eval $(call KernelPackage,ath)) -$(eval $(call KernelPackage,carl9170)) -$(eval $(call KernelPackage,b43)) -$(eval $(call KernelPackage,b43legacy)) -$(eval $(call KernelPackage,brcmutil)) -$(eval $(call KernelPackage,brcmsmac)) -$(eval $(call KernelPackage,brcmfmac)) -$(eval $(call KernelPackage,net-libipw)) -$(eval $(call KernelPackage,net-ipw2100)) -$(eval $(call KernelPackage,net-ipw2200)) -$(eval $(call KernelPackage,iwlagn)) -$(eval $(call KernelPackage,iwl-legacy)) -$(eval $(call KernelPackage,iwl4965)) -$(eval $(call KernelPackage,iwl3945)) -$(eval $(call KernelPackage,mwl8k)) -$(eval $(call KernelPackage,mwifiex-pcie)) -$(eval $(call KernelPackage,net-hermes)) -$(eval $(call KernelPackage,net-hermes-pci)) -$(eval $(call KernelPackage,net-hermes-plx)) -$(eval $(call KernelPackage,net-hermes-pcmcia)) +$(eval $(call KernelPackage,rtl8xxxu)) $(eval $(call KernelPackage,wlcore)) $(eval $(call KernelPackage,wl12xx)) $(eval $(call KernelPackage,wl18xx)) +$(eval $(call KernelPackage,zd1211rw)) diff --git a/package/kernel/mac80211/patches/001-fix_build.patch b/package/kernel/mac80211/patches/001-fix_build.patch index 818983e06e..402649d2cc 100644 --- a/package/kernel/mac80211/patches/001-fix_build.patch +++ b/package/kernel/mac80211/patches/001-fix_build.patch @@ -27,7 +27,7 @@ @set -e ; test -f .local-symbols || ( \ echo "/--------------" ;\ echo "| You shouldn't run make in the backports tree, but only in" ;\ -@@ -60,56 +62,60 @@ mrproper: +@@ -60,57 +62,61 @@ mrproper: echo "| (that isn't currently running.)" ;\ echo "\\--" ;\ false) @@ -56,11 +56,12 @@ - done \ - ) > Kconfig.kernel ;\ - kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion | \ -- sed 's/^\(\(3\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\ +- sed 's/^\(\([3-4]\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\ - test "$$kver" != "" || echo "Kernel version parse failed!" ;\ - test "$$kver" != "" ;\ - kvers="$$(seq 14 39 | sed 's/^/2.6./')" ;\ -- kvers="$$kvers $$(seq 0 99 | sed 's/^/3./')" ;\ +- kvers="$$kvers $$(seq 0 19 | sed 's/^/3./')" ;\ +- kvers="$$kvers $$(seq 0 99 | sed 's/^/4./')" ;\ - print=0 ;\ - for v in $$kvers ; do \ - if [ "$$print" = "1" ] ; then \ @@ -111,11 +112,12 @@ + +Kconfig.versions: Kconfig.kernel + @kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion | \ -+ sed 's/^\(\(3\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\ ++ sed 's/^\(\([3-4]\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\ + test "$$kver" != "" || echo "Kernel version parse failed!" ;\ + test "$$kver" != "" ;\ + kvers="$$(seq 14 39 | sed 's/^/2.6./')" ;\ -+ kvers="$$kvers $$(seq 0 99 | sed 's/^/3./')" ;\ ++ kvers="$$kvers $$(seq 0 19 | sed 's/^/3./')" ;\ ++ kvers="$$kvers $$(seq 0 99 | sed 's/^/4./')" ;\ + print=0 ;\ + for v in $$kvers ; do \ + if [ "$$print" = "1" ] ; then \ diff --git a/package/kernel/mac80211/patches/002-change_allconfig.patch b/package/kernel/mac80211/patches/002-change_allconfig.patch index 91ad20f06d..bd5bebfa45 100644 --- a/package/kernel/mac80211/patches/002-change_allconfig.patch +++ b/package/kernel/mac80211/patches/002-change_allconfig.patch @@ -1,6 +1,6 @@ --- a/kconf/conf.c +++ b/kconf/conf.c -@@ -578,40 +578,12 @@ int main(int ac, char **av) +@@ -593,40 +593,12 @@ int main(int ac, char **av) case oldconfig: case listnewconfig: case olddefconfig: @@ -42,3 +42,23 @@ break; default: break; +--- a/kconf/confdata.c ++++ b/kconf/confdata.c +@@ -1169,6 +1169,8 @@ bool conf_set_all_new_symbols(enum conf_ + } + bool has_changed = false; + ++ sym_clear_all_valid(); ++ + for_all_symbols(i, sym) { + if (sym_has_value(sym) || (sym->flags & SYMBOL_VALID)) + continue; +@@ -1212,8 +1214,6 @@ bool conf_set_all_new_symbols(enum conf_ + + } + +- sym_clear_all_valid(); +- + /* + * We have different type of choice blocks. + * If curr.tri equals to mod then we can select several diff --git a/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch b/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch new file mode 100644 index 0000000000..9adfd8f719 --- /dev/null +++ b/package/kernel/mac80211/patches/004-backports-add-skb_free_frag.patch @@ -0,0 +1,21 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Thu, 28 Jan 2016 15:16:35 +0100 +Subject: [PATCH] backports: add skb_free_frag() + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/backport-include/linux/skbuff.h ++++ b/backport-include/linux/skbuff.h +@@ -300,4 +300,11 @@ int skb_ensure_writable(struct sk_buff * + + #endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0) */ + ++#if LINUX_VERSION_CODE < KERNEL_VERSION(4,2,0) ++static inline void skb_free_frag(void *data) ++{ ++ put_page(virt_to_head_page(data)); ++} ++#endif ++ + #endif /* __BACKPORT_SKBUFF_H */ diff --git a/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch b/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch deleted file mode 100644 index d48a723443..0000000000 --- a/package/kernel/mac80211/patches/004-backports_debugfs_fix.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/backport-include/linux/debugfs.h -+++ b/backport-include/linux/debugfs.h -@@ -3,6 +3,7 @@ - #include_next <linux/debugfs.h> - #include <linux/version.h> - #include <generated/utsrelease.h> -+#include <linux/device.h> - - #if defined(CONFIG_DEBUG_FS) - struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name, diff --git a/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch b/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch new file mode 100644 index 0000000000..9b672a8d14 --- /dev/null +++ b/package/kernel/mac80211/patches/005-backports-add-napi_alloc_frag.patch @@ -0,0 +1,20 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Thu, 28 Jan 2016 15:19:22 +0100 +Subject: [PATCH] backports: add napi_alloc_frag + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/backport-include/linux/netdevice.h ++++ b/backport-include/linux/netdevice.h +@@ -232,6 +232,10 @@ static inline void backport_unregister_n + #define unregister_netdevice_many LINUX_BACKPORT(unregister_netdevice_many) + #endif + ++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0) ++#define napi_alloc_frag netdev_alloc_frag ++#endif ++ + /* + * Complicated way of saying: We only backport netdev_rss_key stuff on kernels + * that either already have net_get_random_once() (>= 3.13) or where we've been diff --git a/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch b/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch deleted file mode 100644 index e07f323190..0000000000 --- a/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -1858,6 +1858,13 @@ void ieee80211_remove_interfaces(struct - } - mutex_unlock(&local->iflist_mtx); - unregister_netdevice_many(&unreg_list); -+#if (!(LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,45) && \ -+ LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)) && \ -+ !(LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,9) && \ -+ LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)) && \ -+ (LINUX_VERSION_CODE < KERNEL_VERSION(3,16,0))) -+ list_del(&unreg_list); -+#endif - - list_for_each_entry_safe(sdata, tmp, &wdev_list, list) { - list_del(&sdata->list); diff --git a/package/kernel/mac80211/patches/020-add_mpls_h.patch b/package/kernel/mac80211/patches/020-add_mpls_h.patch deleted file mode 100644 index e5310bc120..0000000000 --- a/package/kernel/mac80211/patches/020-add_mpls_h.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- /dev/null -+++ b/include/uapi/linux/mpls.h -@@ -0,0 +1,34 @@ -+#ifndef _UAPI_MPLS_H -+#define _UAPI_MPLS_H -+ -+#include <linux/types.h> -+#include <asm/byteorder.h> -+ -+/* Reference: RFC 5462, RFC 3032 -+ * -+ * 0 1 2 3 -+ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 -+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -+ * | Label | TC |S| TTL | -+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -+ * -+ * Label: Label Value, 20 bits -+ * TC: Traffic Class field, 3 bits -+ * S: Bottom of Stack, 1 bit -+ * TTL: Time to Live, 8 bits -+ */ -+ -+struct mpls_label { -+ __be32 entry; -+}; -+ -+#define MPLS_LS_LABEL_MASK 0xFFFFF000 -+#define MPLS_LS_LABEL_SHIFT 12 -+#define MPLS_LS_TC_MASK 0x00000E00 -+#define MPLS_LS_TC_SHIFT 9 -+#define MPLS_LS_S_MASK 0x00000100 -+#define MPLS_LS_S_SHIFT 8 -+#define MPLS_LS_TTL_MASK 0x000000FF -+#define MPLS_LS_TTL_SHIFT 0 -+ -+#endif /* _UAPI_MPLS_H */ diff --git a/package/kernel/mac80211/patches/030-rt2x00_options.patch b/package/kernel/mac80211/patches/030-rt2x00_options.patch index 35b5b5deb2..a4ca8848c6 100644 --- a/package/kernel/mac80211/patches/030-rt2x00_options.patch +++ b/package/kernel/mac80211/patches/030-rt2x00_options.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/Kconfig -+++ b/drivers/net/wireless/rt2x00/Kconfig +--- a/drivers/net/wireless/ralink/rt2x00/Kconfig ++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig @@ -225,36 +225,37 @@ config RT2800SOC @@ -43,5 +43,5 @@ - tristate + tristate "RT2x00 support" depends on m - select BPAUTO_AVERAGE + config RT2X00_LIB_FIRMWARE diff --git a/package/kernel/mac80211/patches/040-brcmutil_option.patch b/package/kernel/mac80211/patches/040-brcmutil_option.patch index 8a6cae6122..167332d916 100644 --- a/package/kernel/mac80211/patches/040-brcmutil_option.patch +++ b/package/kernel/mac80211/patches/040-brcmutil_option.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/brcm80211/Kconfig -+++ b/drivers/net/wireless/brcm80211/Kconfig +--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig ++++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig @@ -1,5 +1,5 @@ config BRCMUTIL - tristate diff --git a/package/kernel/mac80211/patches/045-bcma-from-4.1.patch b/package/kernel/mac80211/patches/045-bcma-from-4.1.patch deleted file mode 100644 index dce217f5cc..0000000000 --- a/package/kernel/mac80211/patches/045-bcma-from-4.1.patch +++ /dev/null @@ -1,104 +0,0 @@ ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm - } - EXPORT_SYMBOL_GPL(bcma_core_pci_power_save); - --int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core, -- bool enable) --{ -- struct pci_dev *pdev; -- u32 coremask, tmp; -- int err = 0; -- -- if (bus->hosttype != BCMA_HOSTTYPE_PCI) { -- /* This bcma device is not on a PCI host-bus. So the IRQs are -- * not routed through the PCI core. -- * So we must not enable routing through the PCI core. */ -- goto out; -- } -- -- pdev = bus->host_pci; -- -- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); -- if (err) -- goto out; -- -- coremask = BIT(core->core_index) << 8; -- if (enable) -- tmp |= coremask; -- else -- tmp &= ~coremask; -- -- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); -- --out: -- return err; --} --EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); -- - static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) - { - u32 w; ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -351,3 +351,37 @@ void bcma_host_pci_down(struct bcma_bus - bcma_core_pci_down(&bus->drv_pci[0]); - } - EXPORT_SYMBOL_GPL(bcma_host_pci_down); -+ -+/* See also si_pci_setup */ -+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core, -+ bool enable) -+{ -+ struct pci_dev *pdev; -+ u32 coremask, tmp; -+ int err = 0; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) { -+ /* This bcma device is not on a PCI host-bus. So the IRQs are -+ * not routed through the PCI core. -+ * So we must not enable routing through the PCI core. */ -+ goto out; -+ } -+ -+ pdev = bus->host_pci; -+ -+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); -+ if (err) -+ goto out; -+ -+ coremask = BIT(core->core_index) << 8; -+ if (enable) -+ tmp |= coremask; -+ else -+ tmp &= ~coremask; -+ -+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); -+ -+out: -+ return err; -+} -+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl); ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c -@@ -4866,7 +4866,7 @@ static int b43_wireless_core_init(struct - switch (dev->dev->bus_type) { - #ifdef CPTCFG_B43_BCMA - case B43_BUS_BCMA: -- bcma_core_pci_irq_ctl(dev->dev->bdev->bus, -+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus, - dev->dev->bdev, true); - bcma_host_pci_up(dev->dev->bdev->bus); - break; ---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c -@@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_ - * Configure pci/pcmcia here instead of in brcms_c_attach() - * to allow mfg hotswap: down, hotswap (chip power cycle), up. - */ -- bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core, -+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core, - true); - - /* diff --git a/package/kernel/mac80211/patches/050-lib80211_option.patch b/package/kernel/mac80211/patches/050-lib80211_option.patch index 5fe5558a12..3fc8c05207 100644 --- a/package/kernel/mac80211/patches/050-lib80211_option.patch +++ b/package/kernel/mac80211/patches/050-lib80211_option.patch @@ -1,6 +1,6 @@ --- a/net/wireless/Kconfig +++ b/net/wireless/Kconfig -@@ -174,7 +174,7 @@ config CFG80211_WEXT_EXPORT +@@ -171,7 +171,7 @@ config CFG80211_WEXT_EXPORT wext compatibility symbols to be exported. config LIB80211 @@ -9,7 +9,7 @@ depends on m default n help -@@ -184,15 +184,15 @@ config LIB80211 +@@ -181,15 +181,15 @@ config LIB80211 Drivers should select this themselves if needed. config LIB80211_CRYPT_WEP diff --git a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch index d3079491dc..fd1e1cff30 100644 --- a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch +++ b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch @@ -1,9 +1,9 @@ --- a/.local-symbols +++ b/.local-symbols -@@ -344,40 +344,3 @@ USB_CDC_PHONET= - USB_IPHETH= +@@ -476,44 +476,6 @@ USB_IPHETH= USB_SIERRA_NET= USB_VL600= + USB_NET_CH9200= -SSB_POSSIBLE= -SSB= -SSB_SPROM= @@ -15,6 +15,7 @@ -SSB_PCMCIAHOST= -SSB_SDIOHOST_POSSIBLE= -SSB_SDIOHOST= +-SSB_HOST_SOC= -SSB_SILENT= -SSB_DEBUG= -SSB_SERIAL= @@ -32,28 +33,20 @@ -BCMA_BLOCKIO= -BCMA_HOST_PCI_POSSIBLE= -BCMA_HOST_PCI= --BCMA_DRIVER_PCI_HOSTMODE= -BCMA_HOST_SOC= -BCMA_DRIVER_PCI= +-BCMA_DRIVER_PCI_HOSTMODE= -BCMA_DRIVER_MIPS= -BCMA_SFLASH= -BCMA_NFLASH= -BCMA_DRIVER_GMAC_CMN= -BCMA_DRIVER_GPIO= -BCMA_DEBUG= ---- a/Makefile.kernel -+++ b/Makefile.kernel -@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/ - obj-$(CPTCFG_WLAN) += drivers/net/wireless/ - #obj-$(CPTCFG_BT) += net/bluetooth/ - #obj-$(CPTCFG_BT) += drivers/bluetooth/ --obj-$(CPTCFG_SSB) += drivers/ssb/ --obj-$(CPTCFG_BCMA) += drivers/bcma/ - #obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/ - obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/ - #obj-$(CPTCFG_NFC) += net/nfc/ ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c + NFC= + NFC_DIGITAL= + NFC_NCI= +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c @@ -2866,7 +2866,7 @@ static struct ssb_device *b43_ssb_gpio_d { struct ssb_bus *bus = dev->dev->sdev->bus; @@ -63,7 +56,7 @@ return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev); #else return bus->chipco.dev; -@@ -4907,7 +4907,7 @@ static int b43_wireless_core_init(struct +@@ -4903,7 +4903,7 @@ static int b43_wireless_core_init(struct } if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW) hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */ @@ -72,8 +65,8 @@ if (dev->dev->bus_type == B43_BUS_SSB && dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI && dev->dev->sdev->bus->pcicore.dev->id.revision <= 10) ---- a/drivers/net/wireless/b43legacy/main.c -+++ b/drivers/net/wireless/b43legacy/main.c +--- a/drivers/net/wireless/broadcom/b43legacy/main.c ++++ b/drivers/net/wireless/broadcom/b43legacy/main.c @@ -1937,7 +1937,7 @@ static int b43legacy_gpio_init(struct b4 if (dev->dev->id.revision >= 2) mask |= 0x0010; /* FIXME: This is redundant. */ @@ -92,8 +85,8 @@ pcidev = bus->pcicore.dev; #endif gpiodev = bus->chipco.dev ? : pcidev; ---- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile -+++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile +--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile @@ -43,6 +43,6 @@ brcmsmac-y := \ brcms_trace_events.o \ debug.o @@ -102,8 +95,8 @@ +brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o obj-$(CPTCFG_BRCMSMAC) += brcmsmac.o ---- a/drivers/net/wireless/brcm80211/brcmsmac/led.h -+++ b/drivers/net/wireless/brcm80211/brcmsmac/led.h +--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h @@ -22,7 +22,7 @@ struct brcms_led { bool active_low; }; @@ -116,12 +109,23 @@ --- a/Kconfig.sources +++ b/Kconfig.sources @@ -9,9 +9,6 @@ source "$BACKPORT_DIR/drivers/net/wirele - #source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig" + source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig" source "$BACKPORT_DIR/drivers/net/usb/Kconfig" -source "$BACKPORT_DIR/drivers/ssb/Kconfig" -source "$BACKPORT_DIR/drivers/bcma/Kconfig" - - #source "$BACKPORT_DIR/net/nfc/Kconfig" + source "$BACKPORT_DIR/net/nfc/Kconfig" - #source "$BACKPORT_DIR/drivers/media/Kconfig" + source "$BACKPORT_DIR/drivers/media/Kconfig" +--- a/Makefile.kernel ++++ b/Makefile.kernel +@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/ + obj-$(CPTCFG_WLAN) += drivers/net/wireless/ + obj-$(CPTCFG_BT) += net/bluetooth/ + obj-$(CPTCFG_BT) += drivers/bluetooth/ +-obj-$(CPTCFG_SSB) += drivers/ssb/ +-obj-$(CPTCFG_BCMA) += drivers/bcma/ + obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/ + obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/ + obj-$(CPTCFG_NFC) += net/nfc/ diff --git a/package/kernel/mac80211/patches/070-ath_common_config.patch b/package/kernel/mac80211/patches/070-ath_common_config.patch index c6e9cd8515..41774fe53e 100644 --- a/package/kernel/mac80211/patches/070-ath_common_config.patch +++ b/package/kernel/mac80211/patches/070-ath_common_config.patch @@ -1,10 +1,9 @@ --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig -@@ -6,6 +6,7 @@ menuconfig ATH_CARDS - tristate "Atheros Wireless Cards" +@@ -1,5 +1,5 @@ + config ATH_COMMON +- tristate ++ tristate "ath.ko" depends on m - depends on CFG80211 && (!UML || BROKEN) -+ select ATH_COMMON - ---help--- - This will enable the support for the Atheros wireless drivers. - ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option + + config WLAN_VENDOR_ATH diff --git a/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch b/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch deleted file mode 100644 index 85c52807fe..0000000000 --- a/package/kernel/mac80211/patches/090-linux_3_18_12_compat.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/backport-include/linux/wait.h -+++ b/backport-include/linux/wait.h -@@ -23,7 +23,7 @@ backport_wait_on_bit_io(void *word, int - - #endif - --#if LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0) -+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,12) - #define WQ_FLAG_WOKEN 0x02 - - #define wait_woken LINUX_BACKPORT(wait_woken) ---- a/compat/backport-3.19.c -+++ b/compat/backport-3.19.c -@@ -15,6 +15,7 @@ - #include <linux/netdevice.h> - #include <linux/debugfs.h> - -+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,12) - static inline bool is_kthread_should_stop(void) - { - return (current->flags & PF_KTHREAD) && kthread_should_stop(); -@@ -79,6 +80,7 @@ int woken_wake_function(wait_queue_t *wa - return default_wake_function(wait, mode, sync, key); - } - EXPORT_SYMBOL(woken_wake_function); -+#endif - - #ifdef __BACKPORT_NETDEV_RSS_KEY_FILL - u8 netdev_rss_key[NETDEV_RSS_KEY_LEN]; diff --git a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch new file mode 100644 index 0000000000..02f46c778d --- /dev/null +++ b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch @@ -0,0 +1,376 @@ +--- a/net/mac80211/Kconfig ++++ b/net/mac80211/Kconfig +@@ -5,8 +5,6 @@ config MAC80211 + depends on CRYPTO + depends on CRYPTO_ARC4 + depends on CRYPTO_AES +- select BPAUTO_CRYPTO_CCM +- depends on CRYPTO_GCM + depends on CRC32 + ---help--- + This option enables the hardware independent IEEE 802.11 +--- a/net/mac80211/Makefile ++++ b/net/mac80211/Makefile +@@ -16,9 +16,7 @@ mac80211-y := \ + michael.o \ + tkip.o \ + aes_ccm.o \ +- aes_gcm.o \ + aes_cmac.o \ +- aes_gmac.o \ + cfg.o \ + ethtool.o \ + rx.o \ +--- a/net/mac80211/aes_ccm.c ++++ b/net/mac80211/aes_ccm.c +@@ -13,89 +13,132 @@ + #include <linux/types.h> + #include <linux/err.h> + #include <crypto/aead.h> ++#include <crypto/aes.h> + + #include <net/mac80211.h> + #include "key.h" + #include "aes_ccm.h" + +-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, +- u8 *data, size_t data_len, u8 *mic, +- size_t mic_len) ++static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, u8 *s_0, ++ u8 *a, u8 *b) + { +- struct scatterlist sg[3]; ++ int i; ++ ++ crypto_cipher_encrypt_one(tfm, b, b_0); ++ ++ /* Extra Authenticate-only data (always two AES blocks) */ ++ for (i = 0; i < AES_BLOCK_SIZE; i++) ++ aad[i] ^= b[i]; ++ crypto_cipher_encrypt_one(tfm, b, aad); ++ ++ aad += AES_BLOCK_SIZE; ++ ++ for (i = 0; i < AES_BLOCK_SIZE; i++) ++ aad[i] ^= b[i]; ++ crypto_cipher_encrypt_one(tfm, a, aad); + +- char aead_req_data[sizeof(struct aead_request) + +- crypto_aead_reqsize(tfm)] +- __aligned(__alignof__(struct aead_request)); +- struct aead_request *aead_req = (void *) aead_req_data; ++ /* Mask out bits from auth-only-b_0 */ ++ b_0[0] &= 0x07; + +- memset(aead_req, 0, sizeof(aead_req_data)); ++ /* S_0 is used to encrypt T (= MIC) */ ++ b_0[14] = 0; ++ b_0[15] = 0; ++ crypto_cipher_encrypt_one(tfm, s_0, b_0); ++} + +- sg_init_table(sg, 3); +- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad)); +- sg_set_buf(&sg[1], data, data_len); +- sg_set_buf(&sg[2], mic, mic_len); + +- aead_request_set_tfm(aead_req, tfm); +- aead_request_set_crypt(aead_req, sg, sg, data_len, b_0); +- aead_request_set_ad(aead_req, sg[0].length); ++void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, ++ u8 *data, size_t data_len, u8 *mic, ++ size_t mic_len) ++{ ++ int i, j, last_len, num_blocks; ++ u8 b[AES_BLOCK_SIZE]; ++ u8 s_0[AES_BLOCK_SIZE]; ++ u8 e[AES_BLOCK_SIZE]; ++ u8 *pos, *cpos; ++ ++ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE); ++ last_len = data_len % AES_BLOCK_SIZE; ++ aes_ccm_prepare(tfm, b_0, aad, s_0, b, b); ++ ++ /* Process payload blocks */ ++ pos = data; ++ cpos = data; ++ for (j = 1; j <= num_blocks; j++) { ++ int blen = (j == num_blocks && last_len) ? ++ last_len : AES_BLOCK_SIZE; ++ ++ /* Authentication followed by encryption */ ++ for (i = 0; i < blen; i++) ++ b[i] ^= pos[i]; ++ crypto_cipher_encrypt_one(tfm, b, b); ++ ++ b_0[14] = (j >> 8) & 0xff; ++ b_0[15] = j & 0xff; ++ crypto_cipher_encrypt_one(tfm, e, b_0); ++ for (i = 0; i < blen; i++) ++ *cpos++ = *pos++ ^ e[i]; ++ } + +- crypto_aead_encrypt(aead_req); ++ for (i = 0; i < mic_len; i++) ++ mic[i] = b[i] ^ s_0[i]; + } + +-int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, ++int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, + u8 *data, size_t data_len, u8 *mic, + size_t mic_len) + { +- struct scatterlist sg[3]; +- char aead_req_data[sizeof(struct aead_request) + +- crypto_aead_reqsize(tfm)] +- __aligned(__alignof__(struct aead_request)); +- struct aead_request *aead_req = (void *) aead_req_data; +- +- if (data_len == 0) +- return -EINVAL; +- +- memset(aead_req, 0, sizeof(aead_req_data)); +- +- sg_init_table(sg, 3); +- sg_set_buf(&sg[0], &aad[2], be16_to_cpup((__be16 *)aad)); +- sg_set_buf(&sg[1], data, data_len); +- sg_set_buf(&sg[2], mic, mic_len); +- +- aead_request_set_tfm(aead_req, tfm); +- aead_request_set_crypt(aead_req, sg, sg, data_len + mic_len, b_0); +- aead_request_set_ad(aead_req, sg[0].length); ++ int i, j, last_len, num_blocks; ++ u8 *pos, *cpos; ++ u8 a[AES_BLOCK_SIZE]; ++ u8 b[AES_BLOCK_SIZE]; ++ u8 s_0[AES_BLOCK_SIZE]; ++ ++ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE); ++ last_len = data_len % AES_BLOCK_SIZE; ++ aes_ccm_prepare(tfm, b_0, aad, s_0, a, b); ++ ++ /* Process payload blocks */ ++ cpos = data; ++ pos = data; ++ for (j = 1; j <= num_blocks; j++) { ++ int blen = (j == num_blocks && last_len) ? ++ last_len : AES_BLOCK_SIZE; ++ ++ /* Decryption followed by authentication */ ++ b_0[14] = (j >> 8) & 0xff; ++ b_0[15] = j & 0xff; ++ crypto_cipher_encrypt_one(tfm, b, b_0); ++ for (i = 0; i < blen; i++) { ++ *pos = *cpos++ ^ b[i]; ++ a[i] ^= *pos++; ++ } ++ crypto_cipher_encrypt_one(tfm, a, a); ++ } ++ ++ for (i = 0; i < mic_len; i++) { ++ if ((mic[i] ^ s_0[i]) != a[i]) ++ return -1; ++ } + +- return crypto_aead_decrypt(aead_req); ++ return 0; + } + +-struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[], +- size_t key_len, +- size_t mic_len) ++struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[], ++ size_t key_len, ++ size_t mic_len) + { +- struct crypto_aead *tfm; +- int err; ++ struct crypto_cipher *tfm; + +- tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC); +- if (IS_ERR(tfm)) +- return tfm; +- +- err = crypto_aead_setkey(tfm, key, key_len); +- if (err) +- goto free_aead; +- err = crypto_aead_setauthsize(tfm, mic_len); +- if (err) +- goto free_aead; ++ tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC); ++ if (!IS_ERR(tfm)) ++ crypto_cipher_setkey(tfm, key, key_len); + + return tfm; +- +-free_aead: +- crypto_free_aead(tfm); +- return ERR_PTR(err); + } + +-void ieee80211_aes_key_free(struct crypto_aead *tfm) ++ ++void ieee80211_aes_key_free(struct crypto_cipher *tfm) + { +- crypto_free_aead(tfm); ++ crypto_free_cipher(tfm); + } +--- a/net/mac80211/aes_ccm.h ++++ b/net/mac80211/aes_ccm.h +@@ -12,15 +12,15 @@ + + #include <linux/crypto.h> + +-struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[], +- size_t key_len, +- size_t mic_len); +-void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, ++struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[], ++ size_t key_len, ++ size_t mic_len); ++void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, + u8 *data, size_t data_len, u8 *mic, + size_t mic_len); +-int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, ++int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *b_0, u8 *aad, + u8 *data, size_t data_len, u8 *mic, + size_t mic_len); +-void ieee80211_aes_key_free(struct crypto_aead *tfm); ++void ieee80211_aes_key_free(struct crypto_cipher *tfm); + + #endif /* AES_CCM_H */ +--- a/net/mac80211/aes_gcm.h ++++ b/net/mac80211/aes_gcm.h +@@ -11,12 +11,28 @@ + + #include <linux/crypto.h> + +-void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad, +- u8 *data, size_t data_len, u8 *mic); +-int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad, +- u8 *data, size_t data_len, u8 *mic); +-struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[], +- size_t key_len); +-void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm); ++static inline void ++ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad, ++ u8 *data, size_t data_len, u8 *mic) ++{ ++} ++ ++static inline int ++ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad, ++ u8 *data, size_t data_len, u8 *mic) ++{ ++ return -EOPNOTSUPP; ++} ++ ++static inline struct crypto_aead * ++ieee80211_aes_gcm_key_setup_encrypt(const u8 key[], size_t key_len) ++{ ++ return NULL; ++} ++ ++static inline void ++ieee80211_aes_gcm_key_free(struct crypto_aead *tfm) ++{ ++} + + #endif /* AES_GCM_H */ +--- a/net/mac80211/aes_gmac.h ++++ b/net/mac80211/aes_gmac.h +@@ -11,10 +11,22 @@ + + #include <linux/crypto.h> + +-struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[], +- size_t key_len); +-int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce, +- const u8 *data, size_t data_len, u8 *mic); +-void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm); ++static inline struct crypto_aead * ++ieee80211_aes_gmac_key_setup(const u8 key[], size_t key_len) ++{ ++ return NULL; ++} ++ ++static inline int ++ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce, ++ const u8 *data, size_t data_len, u8 *mic) ++{ ++ return -EOPNOTSUPP; ++} ++ ++static inline void ++ieee80211_aes_gmac_key_free(struct crypto_aead *tfm) ++{ ++} + + #endif /* AES_GMAC_H */ +--- a/net/mac80211/key.h ++++ b/net/mac80211/key.h +@@ -84,7 +84,7 @@ struct ieee80211_key { + * Management frames. + */ + u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN]; +- struct crypto_aead *tfm; ++ struct crypto_cipher *tfm; + u32 replays; /* dot11RSNAStatsCCMPReplays */ + } ccmp; + struct { +--- a/net/mac80211/wpa.c ++++ b/net/mac80211/wpa.c +@@ -307,7 +307,8 @@ ieee80211_crypto_tkip_decrypt(struct iee + } + + +-static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad) ++static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad, ++ u16 data_len) + { + __le16 mask_fc; + int a4_included, mgmt; +@@ -337,14 +338,8 @@ static void ccmp_special_blocks(struct s + else + qos_tid = 0; + +- /* In CCM, the initial vectors (IV) used for CTR mode encryption and CBC +- * mode authentication are not allowed to collide, yet both are derived +- * from this vector b_0. We only set L := 1 here to indicate that the +- * data size can be represented in (L+1) bytes. The CCM layer will take +- * care of storing the data length in the top (L+1) bytes and setting +- * and clearing the other bits as is required to derive the two IVs. +- */ +- b_0[0] = 0x1; ++ /* First block, b_0 */ ++ b_0[0] = 0x59; /* flags: Adata: 1, M: 011, L: 001 */ + + /* Nonce: Nonce Flags | A2 | PN + * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7) +@@ -352,6 +347,8 @@ static void ccmp_special_blocks(struct s + b_0[1] = qos_tid | (mgmt << 4); + memcpy(&b_0[2], hdr->addr2, ETH_ALEN); + memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN); ++ /* l(m) */ ++ put_unaligned_be16(data_len, &b_0[14]); + + /* AAD (extra authenticate-only data) / masked 802.11 header + * FC | A1 | A2 | A3 | SC | [A4] | [QC] */ +@@ -463,7 +460,7 @@ static int ccmp_encrypt_skb(struct ieee8 + return 0; + + pos += IEEE80211_CCMP_HDR_LEN; +- ccmp_special_blocks(skb, pn, b_0, aad); ++ ccmp_special_blocks(skb, pn, b_0, aad, len); + ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len, + skb_put(skb, mic_len), mic_len); + +@@ -534,7 +531,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee + u8 aad[2 * AES_BLOCK_SIZE]; + u8 b_0[AES_BLOCK_SIZE]; + /* hardware didn't decrypt/verify MIC */ +- ccmp_special_blocks(skb, pn, b_0, aad); ++ ccmp_special_blocks(skb, pn, b_0, aad, data_len); + + if (ieee80211_aes_ccm_decrypt( + key->u.ccmp.tfm, b_0, aad, diff --git a/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch b/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch deleted file mode 100644 index ceca9520f1..0000000000 --- a/package/kernel/mac80211/patches/100-revert-cryptoapi-ports.patch +++ /dev/null @@ -1,2055 +0,0 @@ -This patch reverts the following commits from wireless-testing: - -8ade538bf39b1ee53418528fdacd36b8e65621b9 -56c52da2d554f081e8fce58ecbcf6a40c605b95b -2b2ba0db1c820d04d5143452d70012cd44d7b578 -00b9cfa3ff38401bd70c34b250ca13e5ea347b4a -4f031fa9f188b2b0641ac20087d9e16bcfb4e49d -6e1ee5d2e9e411892b5d84e3ea93e3fc88ac786c -30ef7ef9672d92ab2cac37f60a31955c118321e7 -f359d3fe832e49eeec2232b2af5a9e3aee6b4862 (only the changes in aes_cmac.{c,h}) -7ec7c4a9a686c608315739ab6a2b0527a240883c ---- - ---- a/include/linux/ieee80211.h -+++ b/include/linux/ieee80211.h -@@ -1017,15 +1017,6 @@ struct ieee80211_mmie { - u8 mic[8]; - } __packed; - --/* Management MIC information element (IEEE 802.11w) for GMAC and CMAC-256 */ --struct ieee80211_mmie_16 { -- u8 element_id; -- u8 length; -- __le16 key_id; -- u8 sequence_number[6]; -- u8 mic[16]; --} __packed; -- - struct ieee80211_vendor_ie { - u8 element_id; - u8 len; ---- a/include/net/mac80211.h -+++ b/include/net/mac80211.h -@@ -1306,8 +1306,8 @@ struct ieee80211_vif *wdev_to_ieee80211_ - * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates - * that the key is pairwise rather then a shared key. - * @IEEE80211_KEY_FLAG_SW_MGMT_TX: This flag should be set by the driver for a -- * CCMP/GCMP key if it requires CCMP/GCMP encryption of management frames -- * (MFP) to be done in software. -+ * CCMP key if it requires CCMP encryption of management frames (MFP) to -+ * be done in software. - * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver - * if space should be prepared for the IV, but the IV - * itself should not be generated. Do not set together with -@@ -1322,7 +1322,7 @@ struct ieee80211_vif *wdev_to_ieee80211_ - * RX, if your crypto engine can't deal with TX you can also set the - * %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW. - * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the -- * driver for a CCMP/GCMP key to indicate that is requires IV generation -+ * driver for a CCMP key to indicate that is requires IV generation - * only for managment frames (MFP). - * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the - * driver for a key to indicate that sufficient tailroom must always -@@ -4112,10 +4112,6 @@ void ieee80211_aes_cmac_calculate_k1_k2( - * reverse order than in packet) - * @aes_cmac: PN data, most significant byte first (big endian, - * reverse order than in packet) -- * @aes_gmac: PN data, most significant byte first (big endian, -- * reverse order than in packet) -- * @gcmp: PN data, most significant byte first (big endian, -- * reverse order than in packet) - */ - struct ieee80211_key_seq { - union { -@@ -4129,12 +4125,6 @@ struct ieee80211_key_seq { - struct { - u8 pn[6]; - } aes_cmac; -- struct { -- u8 pn[6]; -- } aes_gmac; -- struct { -- u8 pn[6]; -- } gcmp; - }; - }; - -@@ -4159,7 +4149,7 @@ void ieee80211_get_key_tx_seq(struct iee - * ieee80211_get_key_rx_seq - get key RX sequence counter - * - * @keyconf: the parameter passed with the set key -- * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only); -+ * @tid: The TID, or -1 for the management frame value (CCMP only); - * the value on TID 0 is also used for non-QoS frames. For - * CMAC, only TID 0 is valid. - * @seq: buffer to receive the sequence data -@@ -4195,7 +4185,7 @@ void ieee80211_set_key_tx_seq(struct iee - * ieee80211_set_key_rx_seq - set key RX sequence counter - * - * @keyconf: the parameter passed with the set key -- * @tid: The TID, or -1 for the management frame value (CCMP/GCMP only); -+ * @tid: The TID, or -1 for the management frame value (CCMP only); - * the value on TID 0 is also used for non-QoS frames. For - * CMAC, only TID 0 is valid. - * @seq: new sequence data ---- a/net/mac80211/Kconfig -+++ b/net/mac80211/Kconfig -@@ -5,8 +5,6 @@ config MAC80211 - depends on CRYPTO - depends on CRYPTO_ARC4 - depends on CRYPTO_AES -- select BPAUTO_CRYPTO_CCM -- depends on CRYPTO_GCM - depends on CRC32 - select BPAUTO_AVERAGE - ---help--- ---- a/net/mac80211/Makefile -+++ b/net/mac80211/Makefile -@@ -15,9 +15,7 @@ mac80211-y := \ - michael.o \ - tkip.o \ - aes_ccm.o \ -- aes_gcm.o \ - aes_cmac.o \ -- aes_gmac.o \ - cfg.o \ - ethtool.o \ - rx.o \ ---- a/net/mac80211/aes_ccm.c -+++ b/net/mac80211/aes_ccm.c -@@ -2,8 +2,6 @@ - * Copyright 2003-2004, Instant802 Networks, Inc. - * Copyright 2005-2006, Devicescape Software, Inc. - * -- * Rewrite: Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org> -- * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -@@ -19,82 +17,134 @@ - #include "key.h" - #include "aes_ccm.h" - --void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic, -- size_t mic_len) -+static void aes_ccm_prepare(struct crypto_cipher *tfm, u8 *scratch, u8 *a) -+{ -+ int i; -+ u8 *b_0, *aad, *b, *s_0; -+ -+ b_0 = scratch + 3 * AES_BLOCK_SIZE; -+ aad = scratch + 4 * AES_BLOCK_SIZE; -+ b = scratch; -+ s_0 = scratch + AES_BLOCK_SIZE; -+ -+ crypto_cipher_encrypt_one(tfm, b, b_0); -+ -+ /* Extra Authenticate-only data (always two AES blocks) */ -+ for (i = 0; i < AES_BLOCK_SIZE; i++) -+ aad[i] ^= b[i]; -+ crypto_cipher_encrypt_one(tfm, b, aad); -+ -+ aad += AES_BLOCK_SIZE; -+ -+ for (i = 0; i < AES_BLOCK_SIZE; i++) -+ aad[i] ^= b[i]; -+ crypto_cipher_encrypt_one(tfm, a, aad); -+ -+ /* Mask out bits from auth-only-b_0 */ -+ b_0[0] &= 0x07; -+ -+ /* S_0 is used to encrypt T (= MIC) */ -+ b_0[14] = 0; -+ b_0[15] = 0; -+ crypto_cipher_encrypt_one(tfm, s_0, b_0); -+} -+ -+ -+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch, -+ u8 *data, size_t data_len, -+ u8 *cdata, u8 *mic) - { -- struct scatterlist assoc, pt, ct[2]; -+ int i, j, last_len, num_blocks; -+ u8 *pos, *cpos, *b, *s_0, *e, *b_0; - -- char aead_req_data[sizeof(struct aead_request) + -- crypto_aead_reqsize(tfm)] -- __aligned(__alignof__(struct aead_request)); -- struct aead_request *aead_req = (void *) aead_req_data; -- -- memset(aead_req, 0, sizeof(aead_req_data)); -- -- sg_init_one(&pt, data, data_len); -- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad)); -- sg_init_table(ct, 2); -- sg_set_buf(&ct[0], data, data_len); -- sg_set_buf(&ct[1], mic, mic_len); -- -- aead_request_set_tfm(aead_req, tfm); -- aead_request_set_assoc(aead_req, &assoc, assoc.length); -- aead_request_set_crypt(aead_req, &pt, ct, data_len, b_0); -+ b = scratch; -+ s_0 = scratch + AES_BLOCK_SIZE; -+ e = scratch + 2 * AES_BLOCK_SIZE; -+ b_0 = scratch + 3 * AES_BLOCK_SIZE; -+ -+ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE); -+ last_len = data_len % AES_BLOCK_SIZE; -+ aes_ccm_prepare(tfm, scratch, b); -+ -+ /* Process payload blocks */ -+ pos = data; -+ cpos = cdata; -+ for (j = 1; j <= num_blocks; j++) { -+ int blen = (j == num_blocks && last_len) ? -+ last_len : AES_BLOCK_SIZE; -+ -+ /* Authentication followed by encryption */ -+ for (i = 0; i < blen; i++) -+ b[i] ^= pos[i]; -+ crypto_cipher_encrypt_one(tfm, b, b); -+ -+ b_0[14] = (j >> 8) & 0xff; -+ b_0[15] = j & 0xff; -+ crypto_cipher_encrypt_one(tfm, e, b_0); -+ for (i = 0; i < blen; i++) -+ *cpos++ = *pos++ ^ e[i]; -+ } - -- crypto_aead_encrypt(aead_req); -+ for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++) -+ mic[i] = b[i] ^ s_0[i]; - } - --int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic, -- size_t mic_len) -+ -+int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch, -+ u8 *cdata, size_t data_len, u8 *mic, u8 *data) - { -- struct scatterlist assoc, pt, ct[2]; -- char aead_req_data[sizeof(struct aead_request) + -- crypto_aead_reqsize(tfm)] -- __aligned(__alignof__(struct aead_request)); -- struct aead_request *aead_req = (void *) aead_req_data; -- -- if (data_len == 0) -- return -EINVAL; -- -- memset(aead_req, 0, sizeof(aead_req_data)); -- -- sg_init_one(&pt, data, data_len); -- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad)); -- sg_init_table(ct, 2); -- sg_set_buf(&ct[0], data, data_len); -- sg_set_buf(&ct[1], mic, mic_len); -- -- aead_request_set_tfm(aead_req, tfm); -- aead_request_set_assoc(aead_req, &assoc, assoc.length); -- aead_request_set_crypt(aead_req, ct, &pt, data_len + mic_len, b_0); -+ int i, j, last_len, num_blocks; -+ u8 *pos, *cpos, *b, *s_0, *a, *b_0; -+ -+ b = scratch; -+ s_0 = scratch + AES_BLOCK_SIZE; -+ a = scratch + 2 * AES_BLOCK_SIZE; -+ b_0 = scratch + 3 * AES_BLOCK_SIZE; -+ -+ num_blocks = DIV_ROUND_UP(data_len, AES_BLOCK_SIZE); -+ last_len = data_len % AES_BLOCK_SIZE; -+ aes_ccm_prepare(tfm, scratch, a); -+ -+ /* Process payload blocks */ -+ cpos = cdata; -+ pos = data; -+ for (j = 1; j <= num_blocks; j++) { -+ int blen = (j == num_blocks && last_len) ? -+ last_len : AES_BLOCK_SIZE; -+ -+ /* Decryption followed by authentication */ -+ b_0[14] = (j >> 8) & 0xff; -+ b_0[15] = j & 0xff; -+ crypto_cipher_encrypt_one(tfm, b, b_0); -+ for (i = 0; i < blen; i++) { -+ *pos = *cpos++ ^ b[i]; -+ a[i] ^= *pos++; -+ } -+ crypto_cipher_encrypt_one(tfm, a, a); -+ } -+ -+ for (i = 0; i < IEEE80211_CCMP_MIC_LEN; i++) { -+ if ((mic[i] ^ s_0[i]) != a[i]) -+ return -1; -+ } - -- return crypto_aead_decrypt(aead_req); -+ return 0; - } - --struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[], -- size_t key_len, -- size_t mic_len) -+ -+struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[]) - { -- struct crypto_aead *tfm; -- int err; -+ struct crypto_cipher *tfm; - -- tfm = crypto_alloc_aead("ccm(aes)", 0, CRYPTO_ALG_ASYNC); -- if (IS_ERR(tfm)) -- return tfm; -- -- err = crypto_aead_setkey(tfm, key, key_len); -- if (!err) -- err = crypto_aead_setauthsize(tfm, mic_len); -- if (!err) -- return tfm; -+ tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC); -+ if (!IS_ERR(tfm)) -+ crypto_cipher_setkey(tfm, key, WLAN_KEY_LEN_CCMP); - -- crypto_free_aead(tfm); -- return ERR_PTR(err); -+ return tfm; - } - --void ieee80211_aes_key_free(struct crypto_aead *tfm) -+ -+void ieee80211_aes_key_free(struct crypto_cipher *tfm) - { -- crypto_free_aead(tfm); -+ crypto_free_cipher(tfm); - } ---- a/net/mac80211/aes_ccm.h -+++ b/net/mac80211/aes_ccm.h -@@ -12,15 +12,13 @@ - - #include <linux/crypto.h> - --struct crypto_aead *ieee80211_aes_key_setup_encrypt(const u8 key[], -- size_t key_len, -- size_t mic_len); --void ieee80211_aes_ccm_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic, -- size_t mic_len); --int ieee80211_aes_ccm_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic, -- size_t mic_len); --void ieee80211_aes_key_free(struct crypto_aead *tfm); -+struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[]); -+void ieee80211_aes_ccm_encrypt(struct crypto_cipher *tfm, u8 *scratch, -+ u8 *data, size_t data_len, -+ u8 *cdata, u8 *mic); -+int ieee80211_aes_ccm_decrypt(struct crypto_cipher *tfm, u8 *scratch, -+ u8 *cdata, size_t data_len, -+ u8 *mic, u8 *data); -+void ieee80211_aes_key_free(struct crypto_cipher *tfm); - - #endif /* AES_CCM_H */ ---- a/net/mac80211/aes_cmac.c -+++ b/net/mac80211/aes_cmac.c -@@ -18,8 +18,8 @@ - #include "key.h" - #include "aes_cmac.h" - -+#define AES_CMAC_KEY_LEN 16 - #define CMAC_TLEN 8 /* CMAC TLen = 64 bits (8 octets) */ --#define CMAC_TLEN_256 16 /* CMAC TLen = 128 bits (16 octets) */ - #define AAD_LEN 20 - - -@@ -35,9 +35,9 @@ static void gf_mulx(u8 *pad) - pad[AES_BLOCK_SIZE - 1] ^= 0x87; - } - --static void aes_cmac_vector(struct crypto_cipher *tfm, size_t num_elem, -- const u8 *addr[], const size_t *len, u8 *mac, -- size_t mac_len) -+ -+static void aes_128_cmac_vector(struct crypto_cipher *tfm, size_t num_elem, -+ const u8 *addr[], const size_t *len, u8 *mac) - { - u8 cbc[AES_BLOCK_SIZE], pad[AES_BLOCK_SIZE]; - const u8 *pos, *end; -@@ -88,7 +88,7 @@ static void aes_cmac_vector(struct crypt - for (i = 0; i < AES_BLOCK_SIZE; i++) - pad[i] ^= cbc[i]; - crypto_cipher_encrypt_one(tfm, pad, pad); -- memcpy(mac, pad, mac_len); -+ memcpy(mac, pad, CMAC_TLEN); - } - - -@@ -107,35 +107,17 @@ void ieee80211_aes_cmac(struct crypto_ci - addr[2] = zero; - len[2] = CMAC_TLEN; - -- aes_cmac_vector(tfm, 3, addr, len, mic, CMAC_TLEN); -+ aes_128_cmac_vector(tfm, 3, addr, len, mic); - } - --void ieee80211_aes_cmac_256(struct crypto_cipher *tfm, const u8 *aad, -- const u8 *data, size_t data_len, u8 *mic) --{ -- const u8 *addr[3]; -- size_t len[3]; -- u8 zero[CMAC_TLEN_256]; -- -- memset(zero, 0, CMAC_TLEN_256); -- addr[0] = aad; -- len[0] = AAD_LEN; -- addr[1] = data; -- len[1] = data_len - CMAC_TLEN_256; -- addr[2] = zero; -- len[2] = CMAC_TLEN_256; -- -- aes_cmac_vector(tfm, 3, addr, len, mic, CMAC_TLEN_256); --} - --struct crypto_cipher *ieee80211_aes_cmac_key_setup(const u8 key[], -- size_t key_len) -+struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[]) - { - struct crypto_cipher *tfm; - - tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC); - if (!IS_ERR(tfm)) -- crypto_cipher_setkey(tfm, key, key_len); -+ crypto_cipher_setkey(tfm, key, AES_CMAC_KEY_LEN); - - return tfm; - } ---- a/net/mac80211/aes_cmac.h -+++ b/net/mac80211/aes_cmac.h -@@ -11,12 +11,9 @@ - - #include <linux/crypto.h> - --struct crypto_cipher *ieee80211_aes_cmac_key_setup(const u8 key[], -- size_t key_len); -+struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[]); - void ieee80211_aes_cmac(struct crypto_cipher *tfm, const u8 *aad, - const u8 *data, size_t data_len, u8 *mic); --void ieee80211_aes_cmac_256(struct crypto_cipher *tfm, const u8 *aad, -- const u8 *data, size_t data_len, u8 *mic); - void ieee80211_aes_cmac_key_free(struct crypto_cipher *tfm); - - #endif /* AES_CMAC_H */ ---- a/net/mac80211/aes_gcm.c -+++ /dev/null -@@ -1,95 +0,0 @@ --/* -- * Copyright 2014-2015, Qualcomm Atheros, Inc. -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- */ -- --#include <linux/kernel.h> --#include <linux/types.h> --#include <linux/crypto.h> --#include <linux/err.h> --#include <crypto/aes.h> -- --#include <net/mac80211.h> --#include "key.h" --#include "aes_gcm.h" -- --void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic) --{ -- struct scatterlist assoc, pt, ct[2]; -- -- char aead_req_data[sizeof(struct aead_request) + -- crypto_aead_reqsize(tfm)] -- __aligned(__alignof__(struct aead_request)); -- struct aead_request *aead_req = (void *)aead_req_data; -- -- memset(aead_req, 0, sizeof(aead_req_data)); -- -- sg_init_one(&pt, data, data_len); -- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad)); -- sg_init_table(ct, 2); -- sg_set_buf(&ct[0], data, data_len); -- sg_set_buf(&ct[1], mic, IEEE80211_GCMP_MIC_LEN); -- -- aead_request_set_tfm(aead_req, tfm); -- aead_request_set_assoc(aead_req, &assoc, assoc.length); -- aead_request_set_crypt(aead_req, &pt, ct, data_len, j_0); -- -- crypto_aead_encrypt(aead_req); --} -- --int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic) --{ -- struct scatterlist assoc, pt, ct[2]; -- char aead_req_data[sizeof(struct aead_request) + -- crypto_aead_reqsize(tfm)] -- __aligned(__alignof__(struct aead_request)); -- struct aead_request *aead_req = (void *)aead_req_data; -- -- if (data_len == 0) -- return -EINVAL; -- -- memset(aead_req, 0, sizeof(aead_req_data)); -- -- sg_init_one(&pt, data, data_len); -- sg_init_one(&assoc, &aad[2], be16_to_cpup((__be16 *)aad)); -- sg_init_table(ct, 2); -- sg_set_buf(&ct[0], data, data_len); -- sg_set_buf(&ct[1], mic, IEEE80211_GCMP_MIC_LEN); -- -- aead_request_set_tfm(aead_req, tfm); -- aead_request_set_assoc(aead_req, &assoc, assoc.length); -- aead_request_set_crypt(aead_req, ct, &pt, -- data_len + IEEE80211_GCMP_MIC_LEN, j_0); -- -- return crypto_aead_decrypt(aead_req); --} -- --struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[], -- size_t key_len) --{ -- struct crypto_aead *tfm; -- int err; -- -- tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC); -- if (IS_ERR(tfm)) -- return tfm; -- -- err = crypto_aead_setkey(tfm, key, key_len); -- if (!err) -- err = crypto_aead_setauthsize(tfm, IEEE80211_GCMP_MIC_LEN); -- if (!err) -- return tfm; -- -- crypto_free_aead(tfm); -- return ERR_PTR(err); --} -- --void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm) --{ -- crypto_free_aead(tfm); --} ---- a/net/mac80211/aes_gcm.h -+++ /dev/null -@@ -1,22 +0,0 @@ --/* -- * Copyright 2014-2015, Qualcomm Atheros, Inc. -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- */ -- --#ifndef AES_GCM_H --#define AES_GCM_H -- --#include <linux/crypto.h> -- --void ieee80211_aes_gcm_encrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic); --int ieee80211_aes_gcm_decrypt(struct crypto_aead *tfm, u8 *j_0, u8 *aad, -- u8 *data, size_t data_len, u8 *mic); --struct crypto_aead *ieee80211_aes_gcm_key_setup_encrypt(const u8 key[], -- size_t key_len); --void ieee80211_aes_gcm_key_free(struct crypto_aead *tfm); -- --#endif /* AES_GCM_H */ ---- a/net/mac80211/aes_gmac.c -+++ /dev/null -@@ -1,84 +0,0 @@ --/* -- * AES-GMAC for IEEE 802.11 BIP-GMAC-128 and BIP-GMAC-256 -- * Copyright 2015, Qualcomm Atheros, Inc. -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- */ -- --#include <linux/kernel.h> --#include <linux/types.h> --#include <linux/crypto.h> --#include <linux/err.h> --#include <crypto/aes.h> -- --#include <net/mac80211.h> --#include "key.h" --#include "aes_gmac.h" -- --#define GMAC_MIC_LEN 16 --#define GMAC_NONCE_LEN 12 --#define AAD_LEN 20 -- --int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce, -- const u8 *data, size_t data_len, u8 *mic) --{ -- struct scatterlist sg[3], ct[1]; -- char aead_req_data[sizeof(struct aead_request) + -- crypto_aead_reqsize(tfm)] -- __aligned(__alignof__(struct aead_request)); -- struct aead_request *aead_req = (void *)aead_req_data; -- u8 zero[GMAC_MIC_LEN], iv[AES_BLOCK_SIZE]; -- -- if (data_len < GMAC_MIC_LEN) -- return -EINVAL; -- -- memset(aead_req, 0, sizeof(aead_req_data)); -- -- memset(zero, 0, GMAC_MIC_LEN); -- sg_init_table(sg, 3); -- sg_set_buf(&sg[0], aad, AAD_LEN); -- sg_set_buf(&sg[1], data, data_len - GMAC_MIC_LEN); -- sg_set_buf(&sg[2], zero, GMAC_MIC_LEN); -- -- memcpy(iv, nonce, GMAC_NONCE_LEN); -- memset(iv + GMAC_NONCE_LEN, 0, sizeof(iv) - GMAC_NONCE_LEN); -- iv[AES_BLOCK_SIZE - 1] = 0x01; -- -- sg_init_table(ct, 1); -- sg_set_buf(&ct[0], mic, GMAC_MIC_LEN); -- -- aead_request_set_tfm(aead_req, tfm); -- aead_request_set_assoc(aead_req, sg, AAD_LEN + data_len); -- aead_request_set_crypt(aead_req, NULL, ct, 0, iv); -- -- crypto_aead_encrypt(aead_req); -- -- return 0; --} -- --struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[], -- size_t key_len) --{ -- struct crypto_aead *tfm; -- int err; -- -- tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC); -- if (IS_ERR(tfm)) -- return tfm; -- -- err = crypto_aead_setkey(tfm, key, key_len); -- if (!err) -- return tfm; -- if (!err) -- err = crypto_aead_setauthsize(tfm, GMAC_MIC_LEN); -- -- crypto_free_aead(tfm); -- return ERR_PTR(err); --} -- --void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm) --{ -- crypto_free_aead(tfm); --} ---- a/net/mac80211/aes_gmac.h -+++ /dev/null -@@ -1,20 +0,0 @@ --/* -- * Copyright 2015, Qualcomm Atheros, Inc. -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License version 2 as -- * published by the Free Software Foundation. -- */ -- --#ifndef AES_GMAC_H --#define AES_GMAC_H -- --#include <linux/crypto.h> -- --struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[], -- size_t key_len); --int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce, -- const u8 *data, size_t data_len, u8 *mic); --void ieee80211_aes_gmac_key_free(struct crypto_aead *tfm); -- --#endif /* AES_GMAC_H */ ---- a/net/mac80211/cfg.c -+++ b/net/mac80211/cfg.c -@@ -162,13 +162,8 @@ static int ieee80211_add_key(struct wiph - return -EINVAL; - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: - case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: - break; - default: - cs = ieee80211_cs_get(local, params->cipher, sdata->vif.type); -@@ -353,7 +348,6 @@ static int ieee80211_get_key(struct wiph - params.seq_len = 6; - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - pn64 = atomic64_read(&key->u.ccmp.tx_pn); - seq[0] = pn64; - seq[1] = pn64 >> 8; -@@ -365,35 +359,10 @@ static int ieee80211_get_key(struct wiph - params.seq_len = 6; - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - pn64 = atomic64_read(&key->u.aes_cmac.tx_pn); - seq[0] = pn64; - seq[1] = pn64 >> 8; - seq[2] = pn64 >> 16; -- seq[3] = pn64 >> 24; -- seq[4] = pn64 >> 32; -- seq[5] = pn64 >> 40; -- params.seq = seq; -- params.seq_len = 6; -- break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- pn64 = atomic64_read(&key->u.aes_gmac.tx_pn); -- seq[0] = pn64; -- seq[1] = pn64 >> 8; -- seq[2] = pn64 >> 16; -- seq[3] = pn64 >> 24; -- seq[4] = pn64 >> 32; -- seq[5] = pn64 >> 40; -- params.seq = seq; -- params.seq_len = 6; -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- pn64 = atomic64_read(&key->u.gcmp.tx_pn); -- seq[0] = pn64; -- seq[1] = pn64 >> 8; -- seq[2] = pn64 >> 16; - seq[3] = pn64 >> 24; - seq[4] = pn64 >> 32; - seq[5] = pn64 >> 40; ---- a/net/mac80211/debugfs_key.c -+++ b/net/mac80211/debugfs_key.c -@@ -94,33 +94,17 @@ static ssize_t key_tx_spec_read(struct f - key->u.tkip.tx.iv16); - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - pn = atomic64_read(&key->u.ccmp.tx_pn); - len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n", - (u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24), - (u8)(pn >> 16), (u8)(pn >> 8), (u8)pn); - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - pn = atomic64_read(&key->u.aes_cmac.tx_pn); - len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n", - (u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24), - (u8)(pn >> 16), (u8)(pn >> 8), (u8)pn); - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- pn = atomic64_read(&key->u.aes_gmac.tx_pn); -- len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n", -- (u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24), -- (u8)(pn >> 16), (u8)(pn >> 8), (u8)pn); -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- pn = atomic64_read(&key->u.gcmp.tx_pn); -- len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n", -- (u8)(pn >> 40), (u8)(pn >> 32), (u8)(pn >> 24), -- (u8)(pn >> 16), (u8)(pn >> 8), (u8)pn); -- break; - default: - return 0; - } -@@ -150,7 +134,6 @@ static ssize_t key_rx_spec_read(struct f - len = p - buf; - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) { - rpn = key->u.ccmp.rx_pn[i]; - p += scnprintf(p, sizeof(buf)+buf-p, -@@ -161,7 +144,6 @@ static ssize_t key_rx_spec_read(struct f - len = p - buf; - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - rpn = key->u.aes_cmac.rx_pn; - p += scnprintf(p, sizeof(buf)+buf-p, - "%02x%02x%02x%02x%02x%02x\n", -@@ -169,26 +151,6 @@ static ssize_t key_rx_spec_read(struct f - rpn[3], rpn[4], rpn[5]); - len = p - buf; - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- rpn = key->u.aes_gmac.rx_pn; -- p += scnprintf(p, sizeof(buf)+buf-p, -- "%02x%02x%02x%02x%02x%02x\n", -- rpn[0], rpn[1], rpn[2], -- rpn[3], rpn[4], rpn[5]); -- len = p - buf; -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) { -- rpn = key->u.gcmp.rx_pn[i]; -- p += scnprintf(p, sizeof(buf)+buf-p, -- "%02x%02x%02x%02x%02x%02x\n", -- rpn[0], rpn[1], rpn[2], -- rpn[3], rpn[4], rpn[5]); -- } -- len = p - buf; -- break; - default: - return 0; - } -@@ -205,23 +167,12 @@ static ssize_t key_replays_read(struct f - - switch (key->conf.cipher) { - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - len = scnprintf(buf, sizeof(buf), "%u\n", key->u.ccmp.replays); - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - len = scnprintf(buf, sizeof(buf), "%u\n", - key->u.aes_cmac.replays); - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- len = scnprintf(buf, sizeof(buf), "%u\n", -- key->u.aes_gmac.replays); -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- len = scnprintf(buf, sizeof(buf), "%u\n", key->u.gcmp.replays); -- break; - default: - return 0; - } -@@ -238,15 +189,9 @@ static ssize_t key_icverrors_read(struct - - switch (key->conf.cipher) { - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - len = scnprintf(buf, sizeof(buf), "%u\n", - key->u.aes_cmac.icverrors); - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- len = scnprintf(buf, sizeof(buf), "%u\n", -- key->u.aes_gmac.icverrors); -- break; - default: - return 0; - } ---- a/net/mac80211/key.c -+++ b/net/mac80211/key.c -@@ -24,8 +24,6 @@ - #include "debugfs_key.h" - #include "aes_ccm.h" - #include "aes_cmac.h" --#include "aes_gmac.h" --#include "aes_gcm.h" - - - /** -@@ -164,13 +162,7 @@ static int ieee80211_key_enable_hw_accel - case WLAN_CIPHER_SUITE_WEP104: - case WLAN_CIPHER_SUITE_TKIP: - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: - /* all of these we can do in software - if driver can */ - if (ret == 1) - return 0; -@@ -394,26 +386,7 @@ ieee80211_key_alloc(u32 cipher, int idx, - * Initialize AES key state here as an optimization so that - * it does not need to be initialized for every packet. - */ -- key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt( -- key_data, key_len, IEEE80211_CCMP_MIC_LEN); -- if (IS_ERR(key->u.ccmp.tfm)) { -- err = PTR_ERR(key->u.ccmp.tfm); -- kfree(key); -- return ERR_PTR(err); -- } -- break; -- case WLAN_CIPHER_SUITE_CCMP_256: -- key->conf.iv_len = IEEE80211_CCMP_256_HDR_LEN; -- key->conf.icv_len = IEEE80211_CCMP_256_MIC_LEN; -- for (i = 0; seq && i < IEEE80211_NUM_TIDS + 1; i++) -- for (j = 0; j < IEEE80211_CCMP_256_PN_LEN; j++) -- key->u.ccmp.rx_pn[i][j] = -- seq[IEEE80211_CCMP_256_PN_LEN - j - 1]; -- /* Initialize AES key state here as an optimization so that -- * it does not need to be initialized for every packet. -- */ -- key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt( -- key_data, key_len, IEEE80211_CCMP_256_MIC_LEN); -+ key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(key_data); - if (IS_ERR(key->u.ccmp.tfm)) { - err = PTR_ERR(key->u.ccmp.tfm); - kfree(key); -@@ -421,12 +394,8 @@ ieee80211_key_alloc(u32 cipher, int idx, - } - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - key->conf.iv_len = 0; -- if (cipher == WLAN_CIPHER_SUITE_AES_CMAC) -- key->conf.icv_len = sizeof(struct ieee80211_mmie); -- else -- key->conf.icv_len = sizeof(struct ieee80211_mmie_16); -+ key->conf.icv_len = sizeof(struct ieee80211_mmie); - if (seq) - for (j = 0; j < IEEE80211_CMAC_PN_LEN; j++) - key->u.aes_cmac.rx_pn[j] = -@@ -436,51 +405,13 @@ ieee80211_key_alloc(u32 cipher, int idx, - * it does not need to be initialized for every packet. - */ - key->u.aes_cmac.tfm = -- ieee80211_aes_cmac_key_setup(key_data, key_len); -+ ieee80211_aes_cmac_key_setup(key_data); - if (IS_ERR(key->u.aes_cmac.tfm)) { - err = PTR_ERR(key->u.aes_cmac.tfm); - kfree(key); - return ERR_PTR(err); - } - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- key->conf.iv_len = 0; -- key->conf.icv_len = sizeof(struct ieee80211_mmie_16); -- if (seq) -- for (j = 0; j < IEEE80211_GMAC_PN_LEN; j++) -- key->u.aes_gmac.rx_pn[j] = -- seq[IEEE80211_GMAC_PN_LEN - j - 1]; -- /* Initialize AES key state here as an optimization so that -- * it does not need to be initialized for every packet. -- */ -- key->u.aes_gmac.tfm = -- ieee80211_aes_gmac_key_setup(key_data, key_len); -- if (IS_ERR(key->u.aes_gmac.tfm)) { -- err = PTR_ERR(key->u.aes_gmac.tfm); -- kfree(key); -- return ERR_PTR(err); -- } -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- key->conf.iv_len = IEEE80211_GCMP_HDR_LEN; -- key->conf.icv_len = IEEE80211_GCMP_MIC_LEN; -- for (i = 0; seq && i < IEEE80211_NUM_TIDS + 1; i++) -- for (j = 0; j < IEEE80211_GCMP_PN_LEN; j++) -- key->u.gcmp.rx_pn[i][j] = -- seq[IEEE80211_GCMP_PN_LEN - j - 1]; -- /* Initialize AES key state here as an optimization so that -- * it does not need to be initialized for every packet. -- */ -- key->u.gcmp.tfm = ieee80211_aes_gcm_key_setup_encrypt(key_data, -- key_len); -- if (IS_ERR(key->u.gcmp.tfm)) { -- err = PTR_ERR(key->u.gcmp.tfm); -- kfree(key); -- return ERR_PTR(err); -- } -- break; - default: - if (cs) { - size_t len = (seq_len > MAX_PN_LEN) ? -@@ -502,24 +433,10 @@ ieee80211_key_alloc(u32 cipher, int idx, - - static void ieee80211_key_free_common(struct ieee80211_key *key) - { -- switch (key->conf.cipher) { -- case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: -+ if (key->conf.cipher == WLAN_CIPHER_SUITE_CCMP) - ieee80211_aes_key_free(key->u.ccmp.tfm); -- break; -- case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: -+ if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC) - ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm); -- break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- ieee80211_aes_gmac_key_free(key->u.aes_gmac.tfm); -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- ieee80211_aes_gcm_key_free(key->u.gcmp.tfm); -- break; -- } - kzfree(key); - } - -@@ -826,7 +743,6 @@ void ieee80211_get_key_tx_seq(struct iee - seq->tkip.iv16 = key->u.tkip.tx.iv16; - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - pn64 = atomic64_read(&key->u.ccmp.tx_pn); - seq->ccmp.pn[5] = pn64; - seq->ccmp.pn[4] = pn64 >> 8; -@@ -836,7 +752,6 @@ void ieee80211_get_key_tx_seq(struct iee - seq->ccmp.pn[0] = pn64 >> 40; - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - pn64 = atomic64_read(&key->u.aes_cmac.tx_pn); - seq->ccmp.pn[5] = pn64; - seq->ccmp.pn[4] = pn64 >> 8; -@@ -845,26 +760,6 @@ void ieee80211_get_key_tx_seq(struct iee - seq->ccmp.pn[1] = pn64 >> 32; - seq->ccmp.pn[0] = pn64 >> 40; - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- pn64 = atomic64_read(&key->u.aes_gmac.tx_pn); -- seq->ccmp.pn[5] = pn64; -- seq->ccmp.pn[4] = pn64 >> 8; -- seq->ccmp.pn[3] = pn64 >> 16; -- seq->ccmp.pn[2] = pn64 >> 24; -- seq->ccmp.pn[1] = pn64 >> 32; -- seq->ccmp.pn[0] = pn64 >> 40; -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- pn64 = atomic64_read(&key->u.gcmp.tx_pn); -- seq->gcmp.pn[5] = pn64; -- seq->gcmp.pn[4] = pn64 >> 8; -- seq->gcmp.pn[3] = pn64 >> 16; -- seq->gcmp.pn[2] = pn64 >> 24; -- seq->gcmp.pn[1] = pn64 >> 32; -- seq->gcmp.pn[0] = pn64 >> 40; -- break; - default: - WARN_ON(1); - } -@@ -887,7 +782,6 @@ void ieee80211_get_key_rx_seq(struct iee - seq->tkip.iv16 = key->u.tkip.rx[tid].iv16; - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS)) - return; - if (tid < 0) -@@ -897,29 +791,11 @@ void ieee80211_get_key_rx_seq(struct iee - memcpy(seq->ccmp.pn, pn, IEEE80211_CCMP_PN_LEN); - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - if (WARN_ON(tid != 0)) - return; - pn = key->u.aes_cmac.rx_pn; - memcpy(seq->aes_cmac.pn, pn, IEEE80211_CMAC_PN_LEN); - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- if (WARN_ON(tid != 0)) -- return; -- pn = key->u.aes_gmac.rx_pn; -- memcpy(seq->aes_gmac.pn, pn, IEEE80211_GMAC_PN_LEN); -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS)) -- return; -- if (tid < 0) -- pn = key->u.gcmp.rx_pn[IEEE80211_NUM_TIDS]; -- else -- pn = key->u.gcmp.rx_pn[tid]; -- memcpy(seq->gcmp.pn, pn, IEEE80211_GCMP_PN_LEN); -- break; - } - } - EXPORT_SYMBOL(ieee80211_get_key_rx_seq); -@@ -938,7 +814,6 @@ void ieee80211_set_key_tx_seq(struct iee - key->u.tkip.tx.iv16 = seq->tkip.iv16; - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - pn64 = (u64)seq->ccmp.pn[5] | - ((u64)seq->ccmp.pn[4] << 8) | - ((u64)seq->ccmp.pn[3] << 16) | -@@ -948,7 +823,6 @@ void ieee80211_set_key_tx_seq(struct iee - atomic64_set(&key->u.ccmp.tx_pn, pn64); - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - pn64 = (u64)seq->aes_cmac.pn[5] | - ((u64)seq->aes_cmac.pn[4] << 8) | - ((u64)seq->aes_cmac.pn[3] << 16) | -@@ -957,26 +831,6 @@ void ieee80211_set_key_tx_seq(struct iee - ((u64)seq->aes_cmac.pn[0] << 40); - atomic64_set(&key->u.aes_cmac.tx_pn, pn64); - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- pn64 = (u64)seq->aes_gmac.pn[5] | -- ((u64)seq->aes_gmac.pn[4] << 8) | -- ((u64)seq->aes_gmac.pn[3] << 16) | -- ((u64)seq->aes_gmac.pn[2] << 24) | -- ((u64)seq->aes_gmac.pn[1] << 32) | -- ((u64)seq->aes_gmac.pn[0] << 40); -- atomic64_set(&key->u.aes_gmac.tx_pn, pn64); -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- pn64 = (u64)seq->gcmp.pn[5] | -- ((u64)seq->gcmp.pn[4] << 8) | -- ((u64)seq->gcmp.pn[3] << 16) | -- ((u64)seq->gcmp.pn[2] << 24) | -- ((u64)seq->gcmp.pn[1] << 32) | -- ((u64)seq->gcmp.pn[0] << 40); -- atomic64_set(&key->u.gcmp.tx_pn, pn64); -- break; - default: - WARN_ON(1); - break; -@@ -1000,7 +854,6 @@ void ieee80211_set_key_rx_seq(struct iee - key->u.tkip.rx[tid].iv16 = seq->tkip.iv16; - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: - if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS)) - return; - if (tid < 0) -@@ -1010,29 +863,11 @@ void ieee80211_set_key_rx_seq(struct iee - memcpy(pn, seq->ccmp.pn, IEEE80211_CCMP_PN_LEN); - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: - if (WARN_ON(tid != 0)) - return; - pn = key->u.aes_cmac.rx_pn; - memcpy(pn, seq->aes_cmac.pn, IEEE80211_CMAC_PN_LEN); - break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- if (WARN_ON(tid != 0)) -- return; -- pn = key->u.aes_gmac.rx_pn; -- memcpy(pn, seq->aes_gmac.pn, IEEE80211_GMAC_PN_LEN); -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- if (WARN_ON(tid < -1 || tid >= IEEE80211_NUM_TIDS)) -- return; -- if (tid < 0) -- pn = key->u.gcmp.rx_pn[IEEE80211_NUM_TIDS]; -- else -- pn = key->u.gcmp.rx_pn[tid]; -- memcpy(pn, seq->gcmp.pn, IEEE80211_GCMP_PN_LEN); -- break; - default: - WARN_ON(1); - break; ---- a/net/mac80211/key.h -+++ b/net/mac80211/key.h -@@ -84,7 +84,7 @@ struct ieee80211_key { - * Management frames. - */ - u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_CCMP_PN_LEN]; -- struct crypto_aead *tfm; -+ struct crypto_cipher *tfm; - u32 replays; /* dot11RSNAStatsCCMPReplays */ - } ccmp; - struct { -@@ -95,24 +95,6 @@ struct ieee80211_key { - u32 icverrors; /* dot11RSNAStatsCMACICVErrors */ - } aes_cmac; - struct { -- atomic64_t tx_pn; -- u8 rx_pn[IEEE80211_GMAC_PN_LEN]; -- struct crypto_aead *tfm; -- u32 replays; /* dot11RSNAStatsCMACReplays */ -- u32 icverrors; /* dot11RSNAStatsCMACICVErrors */ -- } aes_gmac; -- struct { -- atomic64_t tx_pn; -- /* Last received packet number. The first -- * IEEE80211_NUM_TIDS counters are used with Data -- * frames and the last counter is used with Robust -- * Management frames. -- */ -- u8 rx_pn[IEEE80211_NUM_TIDS + 1][IEEE80211_GCMP_PN_LEN]; -- struct crypto_aead *tfm; -- u32 replays; /* dot11RSNAStatsGCMPReplays */ -- } gcmp; -- struct { - /* generic cipher scheme */ - u8 rx_pn[IEEE80211_NUM_TIDS + 1][MAX_PN_LEN]; - } gen; ---- a/net/mac80211/main.c -+++ b/net/mac80211/main.c -@@ -666,15 +666,9 @@ static int ieee80211_init_cipher_suites( - WLAN_CIPHER_SUITE_WEP104, - WLAN_CIPHER_SUITE_TKIP, - WLAN_CIPHER_SUITE_CCMP, -- WLAN_CIPHER_SUITE_CCMP_256, -- WLAN_CIPHER_SUITE_GCMP, -- WLAN_CIPHER_SUITE_GCMP_256, - - /* keep last -- depends on hw flags! */ -- WLAN_CIPHER_SUITE_AES_CMAC, -- WLAN_CIPHER_SUITE_BIP_CMAC_256, -- WLAN_CIPHER_SUITE_BIP_GMAC_128, -- WLAN_CIPHER_SUITE_BIP_GMAC_256, -+ WLAN_CIPHER_SUITE_AES_CMAC - }; - - if (local->hw.flags & IEEE80211_HW_SW_CRYPTO_CONTROL || -@@ -713,7 +707,7 @@ static int ieee80211_init_cipher_suites( - local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); - - if (!have_mfp) -- local->hw.wiphy->n_cipher_suites -= 4; -+ local->hw.wiphy->n_cipher_suites--; - - if (!have_wep) { - local->hw.wiphy->cipher_suites += 2; -@@ -730,42 +724,32 @@ static int ieee80211_init_cipher_suites( - /* Driver specifies cipher schemes only (but not cipher suites - * including the schemes) - * -- * We start counting ciphers defined by schemes, TKIP, CCMP, -- * CCMP-256, GCMP, and GCMP-256 -+ * We start counting ciphers defined by schemes, TKIP and CCMP - */ -- n_suites = local->hw.n_cipher_schemes + 5; -+ n_suites = local->hw.n_cipher_schemes + 2; - - /* check if we have WEP40 and WEP104 */ - if (have_wep) - n_suites += 2; - -- /* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128, -- * BIP-GMAC-256 -- */ -+ /* check if we have AES_CMAC */ - if (have_mfp) -- n_suites += 4; -+ n_suites++; - - suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL); - if (!suites) - return -ENOMEM; - - suites[w++] = WLAN_CIPHER_SUITE_CCMP; -- suites[w++] = WLAN_CIPHER_SUITE_CCMP_256; - suites[w++] = WLAN_CIPHER_SUITE_TKIP; -- suites[w++] = WLAN_CIPHER_SUITE_GCMP; -- suites[w++] = WLAN_CIPHER_SUITE_GCMP_256; - - if (have_wep) { - suites[w++] = WLAN_CIPHER_SUITE_WEP40; - suites[w++] = WLAN_CIPHER_SUITE_WEP104; - } - -- if (have_mfp) { -+ if (have_mfp) - suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC; -- suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256; -- suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128; -- suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256; -- } - - for (r = 0; r < local->hw.n_cipher_schemes; r++) - suites[w++] = cs[r].cipher; ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -647,7 +647,6 @@ static int ieee80211_get_mmie_keyidx(str - { - struct ieee80211_mgmt *hdr = (struct ieee80211_mgmt *) skb->data; - struct ieee80211_mmie *mmie; -- struct ieee80211_mmie_16 *mmie16; - - if (skb->len < 24 + sizeof(*mmie) || !is_multicast_ether_addr(hdr->da)) - return -1; -@@ -657,18 +656,11 @@ static int ieee80211_get_mmie_keyidx(str - - mmie = (struct ieee80211_mmie *) - (skb->data + skb->len - sizeof(*mmie)); -- if (mmie->element_id == WLAN_EID_MMIE && -- mmie->length == sizeof(*mmie) - 2) -- return le16_to_cpu(mmie->key_id); -- -- mmie16 = (struct ieee80211_mmie_16 *) -- (skb->data + skb->len - sizeof(*mmie16)); -- if (skb->len >= 24 + sizeof(*mmie16) && -- mmie16->element_id == WLAN_EID_MMIE && -- mmie16->length == sizeof(*mmie16) - 2) -- return le16_to_cpu(mmie16->key_id); -+ if (mmie->element_id != WLAN_EID_MMIE || -+ mmie->length != sizeof(*mmie) - 2) -+ return -1; - -- return -1; -+ return le16_to_cpu(mmie->key_id); - } - - static int iwl80211_get_cs_keyid(const struct ieee80211_cipher_scheme *cs, -@@ -1658,27 +1650,11 @@ ieee80211_rx_h_decrypt(struct ieee80211_ - result = ieee80211_crypto_tkip_decrypt(rx); - break; - case WLAN_CIPHER_SUITE_CCMP: -- result = ieee80211_crypto_ccmp_decrypt( -- rx, IEEE80211_CCMP_MIC_LEN); -- break; -- case WLAN_CIPHER_SUITE_CCMP_256: -- result = ieee80211_crypto_ccmp_decrypt( -- rx, IEEE80211_CCMP_256_MIC_LEN); -+ result = ieee80211_crypto_ccmp_decrypt(rx); - break; - case WLAN_CIPHER_SUITE_AES_CMAC: - result = ieee80211_crypto_aes_cmac_decrypt(rx); - break; -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: -- result = ieee80211_crypto_aes_cmac_256_decrypt(rx); -- break; -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- result = ieee80211_crypto_aes_gmac_decrypt(rx); -- break; -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- result = ieee80211_crypto_gcmp_decrypt(rx); -- break; - default: - result = ieee80211_crypto_hw_decrypt(rx); - } -@@ -1805,9 +1781,7 @@ ieee80211_rx_h_defragment(struct ieee802 - /* This is the first fragment of a new frame. */ - entry = ieee80211_reassemble_add(rx->sdata, frag, seq, - rx->seqno_idx, &(rx->skb)); -- if (rx->key && -- (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP || -- rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256) && -+ if (rx->key && rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP && - ieee80211_has_protected(fc)) { - int queue = rx->security_idx; - /* Store CCMP PN so that we can verify that the next -@@ -1836,9 +1810,7 @@ ieee80211_rx_h_defragment(struct ieee802 - int i; - u8 pn[IEEE80211_CCMP_PN_LEN], *rpn; - int queue; -- if (!rx->key || -- (rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP && -- rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP_256)) -+ if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP) - return RX_DROP_UNUSABLE; - memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN); - for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) { ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -626,9 +626,6 @@ ieee80211_tx_h_select_key(struct ieee802 - tx->key = NULL; - break; - case WLAN_CIPHER_SUITE_CCMP: -- case WLAN_CIPHER_SUITE_CCMP_256: -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: - if (!ieee80211_is_data_present(hdr->frame_control) && - !ieee80211_use_mfp(hdr->frame_control, tx->sta, - tx->skb)) -@@ -639,9 +636,6 @@ ieee80211_tx_h_select_key(struct ieee802 - ieee80211_is_mgmt(hdr->frame_control); - break; - case WLAN_CIPHER_SUITE_AES_CMAC: -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: - if (!ieee80211_is_mgmt(hdr->frame_control)) - tx->key = NULL; - break; -@@ -1017,21 +1011,9 @@ ieee80211_tx_h_encrypt(struct ieee80211_ - case WLAN_CIPHER_SUITE_TKIP: - return ieee80211_crypto_tkip_encrypt(tx); - case WLAN_CIPHER_SUITE_CCMP: -- return ieee80211_crypto_ccmp_encrypt( -- tx, IEEE80211_CCMP_MIC_LEN); -- case WLAN_CIPHER_SUITE_CCMP_256: -- return ieee80211_crypto_ccmp_encrypt( -- tx, IEEE80211_CCMP_256_MIC_LEN); -+ return ieee80211_crypto_ccmp_encrypt(tx); - case WLAN_CIPHER_SUITE_AES_CMAC: - return ieee80211_crypto_aes_cmac_encrypt(tx); -- case WLAN_CIPHER_SUITE_BIP_CMAC_256: -- return ieee80211_crypto_aes_cmac_256_encrypt(tx); -- case WLAN_CIPHER_SUITE_BIP_GMAC_128: -- case WLAN_CIPHER_SUITE_BIP_GMAC_256: -- return ieee80211_crypto_aes_gmac_encrypt(tx); -- case WLAN_CIPHER_SUITE_GCMP: -- case WLAN_CIPHER_SUITE_GCMP_256: -- return ieee80211_crypto_gcmp_encrypt(tx); - default: - return ieee80211_crypto_hw_encrypt(tx); - } ---- a/net/mac80211/wpa.c -+++ b/net/mac80211/wpa.c -@@ -22,8 +22,6 @@ - #include "tkip.h" - #include "aes_ccm.h" - #include "aes_cmac.h" --#include "aes_gmac.h" --#include "aes_gcm.h" - #include "wpa.h" - - ieee80211_tx_result -@@ -304,15 +302,22 @@ ieee80211_crypto_tkip_decrypt(struct iee - } - - --static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *b_0, u8 *aad) -+static void ccmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *scratch, -+ int encrypted) - { - __le16 mask_fc; - int a4_included, mgmt; - u8 qos_tid; -- u16 len_a; -+ u8 *b_0, *aad; -+ u16 data_len, len_a; - unsigned int hdrlen; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - -+ memset(scratch, 0, 6 * AES_BLOCK_SIZE); -+ -+ b_0 = scratch + 3 * AES_BLOCK_SIZE; -+ aad = scratch + 4 * AES_BLOCK_SIZE; -+ - /* - * Mask FC: zero subtype b4 b5 b6 (if not mgmt) - * Retry, PwrMgt, MoreData; set Protected -@@ -334,21 +339,20 @@ static void ccmp_special_blocks(struct s - else - qos_tid = 0; - -- /* In CCM, the initial vectors (IV) used for CTR mode encryption and CBC -- * mode authentication are not allowed to collide, yet both are derived -- * from this vector b_0. We only set L := 1 here to indicate that the -- * data size can be represented in (L+1) bytes. The CCM layer will take -- * care of storing the data length in the top (L+1) bytes and setting -- * and clearing the other bits as is required to derive the two IVs. -- */ -- b_0[0] = 0x1; -+ data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN; -+ if (encrypted) -+ data_len -= IEEE80211_CCMP_MIC_LEN; - -+ /* First block, b_0 */ -+ b_0[0] = 0x59; /* flags: Adata: 1, M: 011, L: 001 */ - /* Nonce: Nonce Flags | A2 | PN - * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7) - */ - b_0[1] = qos_tid | (mgmt << 4); - memcpy(&b_0[2], hdr->addr2, ETH_ALEN); - memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN); -+ /* l(m) */ -+ put_unaligned_be16(data_len, &b_0[14]); - - /* AAD (extra authenticate-only data) / masked 802.11 header - * FC | A1 | A2 | A3 | SC | [A4] | [QC] */ -@@ -395,8 +399,7 @@ static inline void ccmp_hdr2pn(u8 *pn, u - } - - --static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb, -- unsigned int mic_len) -+static int ccmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) - { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - struct ieee80211_key *key = tx->key; -@@ -405,8 +408,7 @@ static int ccmp_encrypt_skb(struct ieee8 - u8 *pos; - u8 pn[6]; - u64 pn64; -- u8 aad[2 * AES_BLOCK_SIZE]; -- u8 b_0[AES_BLOCK_SIZE]; -+ u8 scratch[6 * AES_BLOCK_SIZE]; - - if (info->control.hw_key && - !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) && -@@ -427,7 +429,7 @@ static int ccmp_encrypt_skb(struct ieee8 - if (info->control.hw_key) - tail = 0; - else -- tail = mic_len; -+ tail = IEEE80211_CCMP_MIC_LEN; - - if (WARN_ON(skb_tailroom(skb) < tail || - skb_headroom(skb) < IEEE80211_CCMP_HDR_LEN)) -@@ -460,24 +462,23 @@ static int ccmp_encrypt_skb(struct ieee8 - return 0; - - pos += IEEE80211_CCMP_HDR_LEN; -- ccmp_special_blocks(skb, pn, b_0, aad); -- ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, b_0, aad, pos, len, -- skb_put(skb, mic_len), mic_len); -+ ccmp_special_blocks(skb, pn, scratch, 0); -+ ieee80211_aes_ccm_encrypt(key->u.ccmp.tfm, scratch, pos, len, -+ pos, skb_put(skb, IEEE80211_CCMP_MIC_LEN)); - - return 0; - } - - - ieee80211_tx_result --ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx, -- unsigned int mic_len) -+ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx) - { - struct sk_buff *skb; - - ieee80211_tx_set_protected(tx); - - skb_queue_walk(&tx->skbs, skb) { -- if (ccmp_encrypt_skb(tx, skb, mic_len) < 0) -+ if (ccmp_encrypt_skb(tx, skb) < 0) - return TX_DROP; - } - -@@ -486,8 +487,7 @@ ieee80211_crypto_ccmp_encrypt(struct iee - - - ieee80211_rx_result --ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx, -- unsigned int mic_len) -+ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx) - { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; - int hdrlen; -@@ -504,7 +504,8 @@ ieee80211_crypto_ccmp_decrypt(struct iee - !ieee80211_is_robust_mgmt_frame(skb)) - return RX_CONTINUE; - -- data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - mic_len; -+ data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN - -+ IEEE80211_CCMP_MIC_LEN; - if (!rx->sta || data_len < 0) - return RX_DROP_UNUSABLE; - -@@ -526,23 +527,23 @@ ieee80211_crypto_ccmp_decrypt(struct iee - } - - if (!(status->flag & RX_FLAG_DECRYPTED)) { -- u8 aad[2 * AES_BLOCK_SIZE]; -- u8 b_0[AES_BLOCK_SIZE]; -+ u8 scratch[6 * AES_BLOCK_SIZE]; - /* hardware didn't decrypt/verify MIC */ -- ccmp_special_blocks(skb, pn, b_0, aad); -+ ccmp_special_blocks(skb, pn, scratch, 1); - - if (ieee80211_aes_ccm_decrypt( -- key->u.ccmp.tfm, b_0, aad, -+ key->u.ccmp.tfm, scratch, - skb->data + hdrlen + IEEE80211_CCMP_HDR_LEN, - data_len, -- skb->data + skb->len - mic_len, mic_len)) -+ skb->data + skb->len - IEEE80211_CCMP_MIC_LEN, -+ skb->data + hdrlen + IEEE80211_CCMP_HDR_LEN)) - return RX_DROP_UNUSABLE; - } - - memcpy(key->u.ccmp.rx_pn[queue], pn, IEEE80211_CCMP_PN_LEN); - - /* Remove CCMP header and MIC */ -- if (pskb_trim(skb, skb->len - mic_len)) -+ if (pskb_trim(skb, skb->len - IEEE80211_CCMP_MIC_LEN)) - return RX_DROP_UNUSABLE; - memmove(skb->data + IEEE80211_CCMP_HDR_LEN, skb->data, hdrlen); - skb_pull(skb, IEEE80211_CCMP_HDR_LEN); -@@ -550,229 +551,6 @@ ieee80211_crypto_ccmp_decrypt(struct iee - return RX_CONTINUE; - } - --static void gcmp_special_blocks(struct sk_buff *skb, u8 *pn, u8 *j_0, u8 *aad) --{ -- __le16 mask_fc; -- u8 qos_tid; -- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; -- -- memcpy(j_0, hdr->addr2, ETH_ALEN); -- memcpy(&j_0[ETH_ALEN], pn, IEEE80211_GCMP_PN_LEN); -- j_0[13] = 0; -- j_0[14] = 0; -- j_0[AES_BLOCK_SIZE - 1] = 0x01; -- -- /* AAD (extra authenticate-only data) / masked 802.11 header -- * FC | A1 | A2 | A3 | SC | [A4] | [QC] -- */ -- put_unaligned_be16(ieee80211_hdrlen(hdr->frame_control) - 2, &aad[0]); -- /* Mask FC: zero subtype b4 b5 b6 (if not mgmt) -- * Retry, PwrMgt, MoreData; set Protected -- */ -- mask_fc = hdr->frame_control; -- mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY | -- IEEE80211_FCTL_PM | IEEE80211_FCTL_MOREDATA); -- if (!ieee80211_is_mgmt(hdr->frame_control)) -- mask_fc &= ~cpu_to_le16(0x0070); -- mask_fc |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); -- -- put_unaligned(mask_fc, (__le16 *)&aad[2]); -- memcpy(&aad[4], &hdr->addr1, 3 * ETH_ALEN); -- -- /* Mask Seq#, leave Frag# */ -- aad[22] = *((u8 *)&hdr->seq_ctrl) & 0x0f; -- aad[23] = 0; -- -- if (ieee80211_is_data_qos(hdr->frame_control)) -- qos_tid = *ieee80211_get_qos_ctl(hdr) & -- IEEE80211_QOS_CTL_TID_MASK; -- else -- qos_tid = 0; -- -- if (ieee80211_has_a4(hdr->frame_control)) { -- memcpy(&aad[24], hdr->addr4, ETH_ALEN); -- aad[30] = qos_tid; -- aad[31] = 0; -- } else { -- memset(&aad[24], 0, ETH_ALEN + IEEE80211_QOS_CTL_LEN); -- aad[24] = qos_tid; -- } --} -- --static inline void gcmp_pn2hdr(u8 *hdr, const u8 *pn, int key_id) --{ -- hdr[0] = pn[5]; -- hdr[1] = pn[4]; -- hdr[2] = 0; -- hdr[3] = 0x20 | (key_id << 6); -- hdr[4] = pn[3]; -- hdr[5] = pn[2]; -- hdr[6] = pn[1]; -- hdr[7] = pn[0]; --} -- --static inline void gcmp_hdr2pn(u8 *pn, const u8 *hdr) --{ -- pn[0] = hdr[7]; -- pn[1] = hdr[6]; -- pn[2] = hdr[5]; -- pn[3] = hdr[4]; -- pn[4] = hdr[1]; -- pn[5] = hdr[0]; --} -- --static int gcmp_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) --{ -- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; -- struct ieee80211_key *key = tx->key; -- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); -- int hdrlen, len, tail; -- u8 *pos; -- u8 pn[6]; -- u64 pn64; -- u8 aad[2 * AES_BLOCK_SIZE]; -- u8 j_0[AES_BLOCK_SIZE]; -- -- if (info->control.hw_key && -- !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) && -- !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) && -- !((info->control.hw_key->flags & -- IEEE80211_KEY_FLAG_GENERATE_IV_MGMT) && -- ieee80211_is_mgmt(hdr->frame_control))) { -- /* hwaccel has no need for preallocated room for GCMP -- * header or MIC fields -- */ -- return 0; -- } -- -- hdrlen = ieee80211_hdrlen(hdr->frame_control); -- len = skb->len - hdrlen; -- -- if (info->control.hw_key) -- tail = 0; -- else -- tail = IEEE80211_GCMP_MIC_LEN; -- -- if (WARN_ON(skb_tailroom(skb) < tail || -- skb_headroom(skb) < IEEE80211_GCMP_HDR_LEN)) -- return -1; -- -- pos = skb_push(skb, IEEE80211_GCMP_HDR_LEN); -- memmove(pos, pos + IEEE80211_GCMP_HDR_LEN, hdrlen); -- skb_set_network_header(skb, skb_network_offset(skb) + -- IEEE80211_GCMP_HDR_LEN); -- -- /* the HW only needs room for the IV, but not the actual IV */ -- if (info->control.hw_key && -- (info->control.hw_key->flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)) -- return 0; -- -- hdr = (struct ieee80211_hdr *)pos; -- pos += hdrlen; -- -- pn64 = atomic64_inc_return(&key->u.gcmp.tx_pn); -- -- pn[5] = pn64; -- pn[4] = pn64 >> 8; -- pn[3] = pn64 >> 16; -- pn[2] = pn64 >> 24; -- pn[1] = pn64 >> 32; -- pn[0] = pn64 >> 40; -- -- gcmp_pn2hdr(pos, pn, key->conf.keyidx); -- -- /* hwaccel - with software GCMP header */ -- if (info->control.hw_key) -- return 0; -- -- pos += IEEE80211_GCMP_HDR_LEN; -- gcmp_special_blocks(skb, pn, j_0, aad); -- ieee80211_aes_gcm_encrypt(key->u.gcmp.tfm, j_0, aad, pos, len, -- skb_put(skb, IEEE80211_GCMP_MIC_LEN)); -- -- return 0; --} -- --ieee80211_tx_result --ieee80211_crypto_gcmp_encrypt(struct ieee80211_tx_data *tx) --{ -- struct sk_buff *skb; -- -- ieee80211_tx_set_protected(tx); -- -- skb_queue_walk(&tx->skbs, skb) { -- if (gcmp_encrypt_skb(tx, skb) < 0) -- return TX_DROP; -- } -- -- return TX_CONTINUE; --} -- --ieee80211_rx_result --ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx) --{ -- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; -- int hdrlen; -- struct ieee80211_key *key = rx->key; -- struct sk_buff *skb = rx->skb; -- struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); -- u8 pn[IEEE80211_GCMP_PN_LEN]; -- int data_len; -- int queue; -- -- hdrlen = ieee80211_hdrlen(hdr->frame_control); -- -- if (!ieee80211_is_data(hdr->frame_control) && -- !ieee80211_is_robust_mgmt_frame(skb)) -- return RX_CONTINUE; -- -- data_len = skb->len - hdrlen - IEEE80211_GCMP_HDR_LEN - -- IEEE80211_GCMP_MIC_LEN; -- if (!rx->sta || data_len < 0) -- return RX_DROP_UNUSABLE; -- -- if (status->flag & RX_FLAG_DECRYPTED) { -- if (!pskb_may_pull(rx->skb, hdrlen + IEEE80211_GCMP_HDR_LEN)) -- return RX_DROP_UNUSABLE; -- } else { -- if (skb_linearize(rx->skb)) -- return RX_DROP_UNUSABLE; -- } -- -- gcmp_hdr2pn(pn, skb->data + hdrlen); -- -- queue = rx->security_idx; -- -- if (memcmp(pn, key->u.gcmp.rx_pn[queue], IEEE80211_GCMP_PN_LEN) <= 0) { -- key->u.gcmp.replays++; -- return RX_DROP_UNUSABLE; -- } -- -- if (!(status->flag & RX_FLAG_DECRYPTED)) { -- u8 aad[2 * AES_BLOCK_SIZE]; -- u8 j_0[AES_BLOCK_SIZE]; -- /* hardware didn't decrypt/verify MIC */ -- gcmp_special_blocks(skb, pn, j_0, aad); -- -- if (ieee80211_aes_gcm_decrypt( -- key->u.gcmp.tfm, j_0, aad, -- skb->data + hdrlen + IEEE80211_GCMP_HDR_LEN, -- data_len, -- skb->data + skb->len - IEEE80211_GCMP_MIC_LEN)) -- return RX_DROP_UNUSABLE; -- } -- -- memcpy(key->u.gcmp.rx_pn[queue], pn, IEEE80211_GCMP_PN_LEN); -- -- /* Remove GCMP header and MIC */ -- if (pskb_trim(skb, skb->len - IEEE80211_GCMP_MIC_LEN)) -- return RX_DROP_UNUSABLE; -- memmove(skb->data + IEEE80211_GCMP_HDR_LEN, skb->data, hdrlen); -- skb_pull(skb, IEEE80211_GCMP_HDR_LEN); -- -- return RX_CONTINUE; --} -- - static ieee80211_tx_result - ieee80211_crypto_cs_encrypt(struct ieee80211_tx_data *tx, - struct sk_buff *skb) -@@ -956,48 +734,6 @@ ieee80211_crypto_aes_cmac_encrypt(struct - return TX_CONTINUE; - } - --ieee80211_tx_result --ieee80211_crypto_aes_cmac_256_encrypt(struct ieee80211_tx_data *tx) --{ -- struct sk_buff *skb; -- struct ieee80211_tx_info *info; -- struct ieee80211_key *key = tx->key; -- struct ieee80211_mmie_16 *mmie; -- u8 aad[20]; -- u64 pn64; -- -- if (WARN_ON(skb_queue_len(&tx->skbs) != 1)) -- return TX_DROP; -- -- skb = skb_peek(&tx->skbs); -- -- info = IEEE80211_SKB_CB(skb); -- -- if (info->control.hw_key) -- return TX_CONTINUE; -- -- if (WARN_ON(skb_tailroom(skb) < sizeof(*mmie))) -- return TX_DROP; -- -- mmie = (struct ieee80211_mmie_16 *)skb_put(skb, sizeof(*mmie)); -- mmie->element_id = WLAN_EID_MMIE; -- mmie->length = sizeof(*mmie) - 2; -- mmie->key_id = cpu_to_le16(key->conf.keyidx); -- -- /* PN = PN + 1 */ -- pn64 = atomic64_inc_return(&key->u.aes_cmac.tx_pn); -- -- bip_ipn_set64(mmie->sequence_number, pn64); -- -- bip_aad(skb, aad); -- -- /* MIC = AES-256-CMAC(IGTK, AAD || Management Frame Body || MMIE, 128) -- */ -- ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad, -- skb->data + 24, skb->len - 24, mmie->mic); -- -- return TX_CONTINUE; --} - - ieee80211_rx_result - ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx) -@@ -1045,160 +781,6 @@ ieee80211_crypto_aes_cmac_decrypt(struct - - /* Remove MMIE */ - skb_trim(skb, skb->len - sizeof(*mmie)); -- -- return RX_CONTINUE; --} -- --ieee80211_rx_result --ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx) --{ -- struct sk_buff *skb = rx->skb; -- struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); -- struct ieee80211_key *key = rx->key; -- struct ieee80211_mmie_16 *mmie; -- u8 aad[20], mic[16], ipn[6]; -- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; -- -- if (!ieee80211_is_mgmt(hdr->frame_control)) -- return RX_CONTINUE; -- -- /* management frames are already linear */ -- -- if (skb->len < 24 + sizeof(*mmie)) -- return RX_DROP_UNUSABLE; -- -- mmie = (struct ieee80211_mmie_16 *) -- (skb->data + skb->len - sizeof(*mmie)); -- if (mmie->element_id != WLAN_EID_MMIE || -- mmie->length != sizeof(*mmie) - 2) -- return RX_DROP_UNUSABLE; /* Invalid MMIE */ -- -- bip_ipn_swap(ipn, mmie->sequence_number); -- -- if (memcmp(ipn, key->u.aes_cmac.rx_pn, 6) <= 0) { -- key->u.aes_cmac.replays++; -- return RX_DROP_UNUSABLE; -- } -- -- if (!(status->flag & RX_FLAG_DECRYPTED)) { -- /* hardware didn't decrypt/verify MIC */ -- bip_aad(skb, aad); -- ieee80211_aes_cmac_256(key->u.aes_cmac.tfm, aad, -- skb->data + 24, skb->len - 24, mic); -- if (memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) { -- key->u.aes_cmac.icverrors++; -- return RX_DROP_UNUSABLE; -- } -- } -- -- memcpy(key->u.aes_cmac.rx_pn, ipn, 6); -- -- /* Remove MMIE */ -- skb_trim(skb, skb->len - sizeof(*mmie)); -- -- return RX_CONTINUE; --} -- --ieee80211_tx_result --ieee80211_crypto_aes_gmac_encrypt(struct ieee80211_tx_data *tx) --{ -- struct sk_buff *skb; -- struct ieee80211_tx_info *info; -- struct ieee80211_key *key = tx->key; -- struct ieee80211_mmie_16 *mmie; -- struct ieee80211_hdr *hdr; -- u8 aad[20]; -- u64 pn64; -- u8 nonce[12]; -- -- if (WARN_ON(skb_queue_len(&tx->skbs) != 1)) -- return TX_DROP; -- -- skb = skb_peek(&tx->skbs); -- -- info = IEEE80211_SKB_CB(skb); -- -- if (info->control.hw_key) -- return TX_CONTINUE; -- -- if (WARN_ON(skb_tailroom(skb) < sizeof(*mmie))) -- return TX_DROP; -- -- mmie = (struct ieee80211_mmie_16 *)skb_put(skb, sizeof(*mmie)); -- mmie->element_id = WLAN_EID_MMIE; -- mmie->length = sizeof(*mmie) - 2; -- mmie->key_id = cpu_to_le16(key->conf.keyidx); -- -- /* PN = PN + 1 */ -- pn64 = atomic64_inc_return(&key->u.aes_gmac.tx_pn); -- -- bip_ipn_set64(mmie->sequence_number, pn64); -- -- bip_aad(skb, aad); -- -- hdr = (struct ieee80211_hdr *)skb->data; -- memcpy(nonce, hdr->addr2, ETH_ALEN); -- bip_ipn_swap(nonce + ETH_ALEN, mmie->sequence_number); -- -- /* MIC = AES-GMAC(IGTK, AAD || Management Frame Body || MMIE, 128) */ -- if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce, -- skb->data + 24, skb->len - 24, mmie->mic) < 0) -- return TX_DROP; -- -- return TX_CONTINUE; --} -- --ieee80211_rx_result --ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx) --{ -- struct sk_buff *skb = rx->skb; -- struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); -- struct ieee80211_key *key = rx->key; -- struct ieee80211_mmie_16 *mmie; -- u8 aad[20], mic[16], ipn[6], nonce[12]; -- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; -- -- if (!ieee80211_is_mgmt(hdr->frame_control)) -- return RX_CONTINUE; -- -- /* management frames are already linear */ -- -- if (skb->len < 24 + sizeof(*mmie)) -- return RX_DROP_UNUSABLE; -- -- mmie = (struct ieee80211_mmie_16 *) -- (skb->data + skb->len - sizeof(*mmie)); -- if (mmie->element_id != WLAN_EID_MMIE || -- mmie->length != sizeof(*mmie) - 2) -- return RX_DROP_UNUSABLE; /* Invalid MMIE */ -- -- bip_ipn_swap(ipn, mmie->sequence_number); -- -- if (memcmp(ipn, key->u.aes_gmac.rx_pn, 6) <= 0) { -- key->u.aes_gmac.replays++; -- return RX_DROP_UNUSABLE; -- } -- -- if (!(status->flag & RX_FLAG_DECRYPTED)) { -- /* hardware didn't decrypt/verify MIC */ -- bip_aad(skb, aad); -- -- memcpy(nonce, hdr->addr2, ETH_ALEN); -- memcpy(nonce + ETH_ALEN, ipn, 6); -- -- if (ieee80211_aes_gmac(key->u.aes_gmac.tfm, aad, nonce, -- skb->data + 24, skb->len - 24, -- mic) < 0 || -- memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) { -- key->u.aes_gmac.icverrors++; -- return RX_DROP_UNUSABLE; -- } -- } -- -- memcpy(key->u.aes_gmac.rx_pn, ipn, 6); -- -- /* Remove MMIE */ -- skb_trim(skb, skb->len - sizeof(*mmie)); - - return RX_CONTINUE; - } ---- a/net/mac80211/wpa.h -+++ b/net/mac80211/wpa.h -@@ -24,32 +24,17 @@ ieee80211_rx_result - ieee80211_crypto_tkip_decrypt(struct ieee80211_rx_data *rx); - - ieee80211_tx_result --ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx, -- unsigned int mic_len); -+ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx); - ieee80211_rx_result --ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx, -- unsigned int mic_len); -+ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx); - - ieee80211_tx_result - ieee80211_crypto_aes_cmac_encrypt(struct ieee80211_tx_data *tx); --ieee80211_tx_result --ieee80211_crypto_aes_cmac_256_encrypt(struct ieee80211_tx_data *tx); - ieee80211_rx_result - ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx); --ieee80211_rx_result --ieee80211_crypto_aes_cmac_256_decrypt(struct ieee80211_rx_data *rx); --ieee80211_tx_result --ieee80211_crypto_aes_gmac_encrypt(struct ieee80211_tx_data *tx); --ieee80211_rx_result --ieee80211_crypto_aes_gmac_decrypt(struct ieee80211_rx_data *rx); - ieee80211_tx_result - ieee80211_crypto_hw_encrypt(struct ieee80211_tx_data *tx); - ieee80211_rx_result - ieee80211_crypto_hw_decrypt(struct ieee80211_rx_data *rx); - --ieee80211_tx_result --ieee80211_crypto_gcmp_encrypt(struct ieee80211_tx_data *tx); --ieee80211_rx_result --ieee80211_crypto_gcmp_decrypt(struct ieee80211_rx_data *rx); -- - #endif /* WPA_H */ diff --git a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch index 41a3c4f355..d1d9fbd9b1 100644 --- a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch +++ b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch @@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -856,7 +856,6 @@ static int ieee80211_stop_ap(struct wiph +@@ -846,7 +846,6 @@ static int ieee80211_stop_ap(struct wiph sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF; __sta_info_flush(sdata, true); diff --git a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch index de79bd2438..2855a88af7 100644 --- a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch +++ b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch @@ -1,6 +1,6 @@ --- a/net/mac80211/main.c +++ b/net/mac80211/main.c -@@ -287,7 +287,7 @@ void ieee80211_restart_hw(struct ieee802 +@@ -291,7 +291,7 @@ void ieee80211_restart_hw(struct ieee802 } EXPORT_SYMBOL(ieee80211_restart_hw); @@ -9,7 +9,7 @@ static int ieee80211_ifa_changed(struct notifier_block *nb, unsigned long data, void *arg) { -@@ -346,7 +346,7 @@ static int ieee80211_ifa_changed(struct +@@ -350,7 +350,7 @@ static int ieee80211_ifa_changed(struct } #endif @@ -18,9 +18,9 @@ static int ieee80211_ifa6_changed(struct notifier_block *nb, unsigned long data, void *arg) { -@@ -1057,14 +1057,14 @@ int ieee80211_register_hw(struct ieee802 - if (result) - goto fail_pm_qos; +@@ -1087,14 +1087,14 @@ int ieee80211_register_hw(struct ieee802 + + rtnl_unlock(); -#ifdef CONFIG_INET +#ifdef __disabled__CONFIG_INET @@ -35,7 +35,7 @@ local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed; result = register_inet6addr_notifier(&local->ifa6_notifier); if (result) -@@ -1073,13 +1073,13 @@ int ieee80211_register_hw(struct ieee802 +@@ -1103,13 +1103,13 @@ int ieee80211_register_hw(struct ieee802 return 0; @@ -50,12 +50,12 @@ -#if defined(CONFIG_INET) || defined(CONFIG_IPV6) +#if defined(__disabled__CONFIG_INET) || defined(__disabled__CONFIG_IPV6) fail_ifa: - pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, - &local->network_latency_notifier); -@@ -1124,10 +1124,10 @@ void ieee80211_unregister_hw(struct ieee + #endif + rtnl_lock(); +@@ -1137,10 +1137,10 @@ void ieee80211_unregister_hw(struct ieee + tasklet_kill(&local->tx_pending_tasklet); + tasklet_kill(&local->tasklet); - pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, - &local->network_latency_notifier); -#ifdef CONFIG_INET +#ifdef __disabled__CONFIG_INET unregister_inetaddr_notifier(&local->ifa_notifier); diff --git a/package/kernel/mac80211/patches/210-ap_scan.patch b/package/kernel/mac80211/patches/210-ap_scan.patch index 47dcec3ba2..a99cbd2bee 100644 --- a/package/kernel/mac80211/patches/210-ap_scan.patch +++ b/package/kernel/mac80211/patches/210-ap_scan.patch @@ -1,6 +1,6 @@ --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -1963,7 +1963,7 @@ static int ieee80211_scan(struct wiphy * +@@ -1999,7 +1999,7 @@ static int ieee80211_scan(struct wiphy * * the frames sent while scanning on other channel will be * lost) */ diff --git a/package/kernel/mac80211/patches/356-ath9k-force-rx_clear-when-disabling-rx.patch b/package/kernel/mac80211/patches/300-ath9k-force-rx_clear-when-disabling-rx.patch index bddb15ad1a..bddb15ad1a 100644 --- a/package/kernel/mac80211/patches/356-ath9k-force-rx_clear-when-disabling-rx.patch +++ b/package/kernel/mac80211/patches/300-ath9k-force-rx_clear-when-disabling-rx.patch diff --git a/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch b/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch deleted file mode 100644 index 237121ba27..0000000000 --- a/package/kernel/mac80211/patches/300-mac80211-add-an-intermediate-software-queue-implemen.patch +++ /dev/null @@ -1,882 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Tue, 18 Nov 2014 23:58:51 +0100 -Subject: [PATCH] mac80211: add an intermediate software queue implementation - -This allows drivers to request per-vif and per-sta-tid queues from which -they can pull frames. This makes it easier to keep the hardware queues -short, and to improve fairness between clients and vifs. - -The task of scheduling packet transmission is left up to the driver - -queueing is controlled by mac80211. Drivers can only dequeue packets by -calling ieee80211_tx_dequeue. This makes it possible to add active queue -management later without changing drivers using this code. - -This can also be used as a starting point to implement A-MSDU -aggregation in a way that does not add artificially induced latency. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/include/net/mac80211.h -+++ b/include/net/mac80211.h -@@ -84,6 +84,39 @@ - * - */ - -+/** -+ * DOC: mac80211 software tx queueing -+ * -+ * mac80211 provides an optional intermediate queueing implementation designed -+ * to allow the driver to keep hardware queues short and provide some fairness -+ * between different stations/interfaces. -+ * In this model, the driver pulls data frames from the mac80211 queue instead -+ * of letting mac80211 push them via drv_tx(). -+ * Other frames (e.g. control or management) are still pushed using drv_tx(). -+ * -+ * Drivers indicate that they use this model by implementing the .wake_tx_queue -+ * driver operation. -+ * -+ * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with a -+ * single per-vif queue for multicast data frames. -+ * -+ * The driver is expected to initialize its private per-queue data for stations -+ * and interfaces in the .add_interface and .sta_add ops. -+ * -+ * The driver can't access the queue directly. To dequeue a frame, it calls -+ * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it -+ * calls the .wake_tx_queue driver op. -+ * -+ * For AP powersave TIM handling, the driver only needs to indicate if it has -+ * buffered packets in the driver specific data structures by calling -+ * ieee80211_sta_set_buffered(). For frames buffered in the ieee80211_txq -+ * struct, mac80211 sets the appropriate TIM PVB bits and calls -+ * .release_buffered_frames(). -+ * In that callback the driver is therefore expected to release its own -+ * buffered frames and afterwards also frames from the ieee80211_txq (obtained -+ * via the usual ieee80211_tx_dequeue). -+ */ -+ - struct device; - - /** -@@ -1246,6 +1279,7 @@ enum ieee80211_vif_flags { - * monitor interface (if that is requested.) - * @drv_priv: data area for driver use, will always be aligned to - * sizeof(void *). -+ * @txq: the multicast data TX queue (if driver uses the TXQ abstraction) - */ - struct ieee80211_vif { - enum nl80211_iftype type; -@@ -1257,6 +1291,8 @@ struct ieee80211_vif { - u8 cab_queue; - u8 hw_queue[IEEE80211_NUM_ACS]; - -+ struct ieee80211_txq *txq; -+ - struct ieee80211_chanctx_conf __rcu *chanctx_conf; - - u32 driver_flags; -@@ -1501,6 +1537,7 @@ struct ieee80211_sta_rates { - * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only - * valid if the STA is a TDLS peer in the first place. - * @mfp: indicates whether the STA uses management frame protection or not. -+ * @txq: per-TID data TX queues (if driver uses the TXQ abstraction) - */ - struct ieee80211_sta { - u32 supp_rates[IEEE80211_NUM_BANDS]; -@@ -1519,6 +1556,8 @@ struct ieee80211_sta { - bool tdls_initiator; - bool mfp; - -+ struct ieee80211_txq *txq[IEEE80211_NUM_TIDS]; -+ - /* must be last */ - u8 drv_priv[0] __aligned(sizeof(void *)); - }; -@@ -1547,6 +1586,27 @@ struct ieee80211_tx_control { - }; - - /** -+ * struct ieee80211_txq - Software intermediate tx queue -+ * -+ * @vif: &struct ieee80211_vif pointer from the add_interface callback. -+ * @sta: station table entry, %NULL for per-vif queue -+ * @tid: the TID for this queue (unused for per-vif queue) -+ * @ac: the AC for this queue -+ * -+ * The driver can obtain packets from this queue by calling -+ * ieee80211_tx_dequeue(). -+ */ -+struct ieee80211_txq { -+ struct ieee80211_vif *vif; -+ struct ieee80211_sta *sta; -+ u8 tid; -+ u8 ac; -+ -+ /* must be last */ -+ u8 drv_priv[0] __aligned(sizeof(void *)); -+}; -+ -+/** - * enum ieee80211_hw_flags - hardware flags - * - * These flags are used to indicate hardware capabilities to -@@ -1770,6 +1830,8 @@ enum ieee80211_hw_flags { - * within &struct ieee80211_sta. - * @chanctx_data_size: size (in bytes) of the drv_priv data area - * within &struct ieee80211_chanctx_conf. -+ * @txq_data_size: size (in bytes) of the drv_priv data area -+ * within @struct ieee80211_txq. - * - * @max_rates: maximum number of alternate rate retry stages the hw - * can handle. -@@ -1818,6 +1880,9 @@ enum ieee80211_hw_flags { - * @n_cipher_schemes: a size of an array of cipher schemes definitions. - * @cipher_schemes: a pointer to an array of cipher scheme definitions - * supported by HW. -+ * -+ * @txq_ac_max_pending: maximum number of frames per AC pending in all txq -+ * entries for a vif. - */ - struct ieee80211_hw { - struct ieee80211_conf conf; -@@ -1830,6 +1895,7 @@ struct ieee80211_hw { - int vif_data_size; - int sta_data_size; - int chanctx_data_size; -+ int txq_data_size; - u16 queues; - u16 max_listen_interval; - s8 max_signal; -@@ -1846,6 +1912,7 @@ struct ieee80211_hw { - u8 uapsd_max_sp_len; - u8 n_cipher_schemes; - const struct ieee80211_cipher_scheme *cipher_schemes; -+ int txq_ac_max_pending; - }; - - /** -@@ -3007,6 +3074,8 @@ enum ieee80211_reconfig_type { - * response template is provided, together with the location of the - * switch-timing IE within the template. The skb can only be used within - * the function call. -+ * -+ * @wake_tx_queue: Called when new packets have been added to the queue. - */ - struct ieee80211_ops { - void (*tx)(struct ieee80211_hw *hw, -@@ -3238,6 +3307,9 @@ struct ieee80211_ops { - void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_tdls_ch_sw_params *params); -+ -+ void (*wake_tx_queue)(struct ieee80211_hw *hw, -+ struct ieee80211_txq *txq); - }; - - /** -@@ -5249,4 +5321,15 @@ void ieee80211_unreserve_tid(struct ieee - */ - size_t ieee80211_ie_split(const u8 *ies, size_t ielen, - const u8 *ids, int n_ids, size_t offset); -+ -+/** -+ * ieee80211_tx_dequeue - dequeue a packet from a software tx queue -+ * -+ * @hw: pointer as obtained from ieee80211_alloc_hw() -+ * @txq: pointer obtained from station or virtual interface -+ * -+ * Returns the skb if successful, %NULL if no frame was available. -+ */ -+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, -+ struct ieee80211_txq *txq); - #endif /* MAC80211_H */ ---- a/net/mac80211/driver-ops.h -+++ b/net/mac80211/driver-ops.h -@@ -1367,4 +1367,16 @@ drv_tdls_recv_channel_switch(struct ieee - trace_drv_return_void(local); - } - -+static inline void drv_wake_tx_queue(struct ieee80211_local *local, -+ struct txq_info *txq) -+{ -+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->txq.vif); -+ -+ if (!check_sdata_in_driver(sdata)) -+ return; -+ -+ trace_drv_wake_tx_queue(local, sdata, txq); -+ local->ops->wake_tx_queue(&local->hw, &txq->txq); -+} -+ - #endif /* __MAC80211_DRIVER_OPS */ ---- a/net/mac80211/ieee80211_i.h -+++ b/net/mac80211/ieee80211_i.h -@@ -809,6 +809,19 @@ struct mac80211_qos_map { - struct rcu_head rcu_head; - }; - -+enum txq_info_flags { -+ IEEE80211_TXQ_STOP, -+ IEEE80211_TXQ_AMPDU, -+}; -+ -+struct txq_info { -+ struct sk_buff_head queue; -+ unsigned long flags; -+ -+ /* keep last! */ -+ struct ieee80211_txq txq; -+}; -+ - struct ieee80211_sub_if_data { - struct list_head list; - -@@ -853,6 +866,7 @@ struct ieee80211_sub_if_data { - bool control_port_no_encrypt; - int encrypt_headroom; - -+ atomic_t txqs_len[IEEE80211_NUM_ACS]; - struct ieee80211_tx_queue_params tx_conf[IEEE80211_NUM_ACS]; - struct mac80211_qos_map __rcu *qos_map; - -@@ -1453,6 +1467,10 @@ static inline struct ieee80211_local *hw - return container_of(hw, struct ieee80211_local, hw); - } - -+static inline struct txq_info *to_txq_info(struct ieee80211_txq *txq) -+{ -+ return container_of(txq, struct txq_info, txq); -+} - - static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr) - { -@@ -1905,6 +1923,9 @@ static inline bool ieee80211_can_run_wor - return true; - } - -+void ieee80211_init_tx_queue(struct ieee80211_sub_if_data *sdata, -+ struct sta_info *sta, -+ struct txq_info *txq, int tid); - void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, - u16 transaction, u16 auth_alg, u16 status, - const u8 *extra, size_t extra_len, const u8 *bssid, ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -969,6 +969,13 @@ static void ieee80211_do_stop(struct iee - } - spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); - -+ if (sdata->vif.txq) { -+ struct txq_info *txqi = to_txq_info(sdata->vif.txq); -+ -+ ieee80211_purge_tx_queue(&local->hw, &txqi->queue); -+ atomic_set(&sdata->txqs_len[txqi->txq.ac], 0); -+ } -+ - if (local->open_count == 0) - ieee80211_clear_tx_pending(local); - -@@ -1674,6 +1681,7 @@ int ieee80211_if_add(struct ieee80211_lo - { - struct net_device *ndev = NULL; - struct ieee80211_sub_if_data *sdata = NULL; -+ struct txq_info *txqi; - int ret, i; - int txqs = 1; - -@@ -1693,10 +1701,18 @@ int ieee80211_if_add(struct ieee80211_lo - ieee80211_assign_perm_addr(local, wdev->address, type); - memcpy(sdata->vif.addr, wdev->address, ETH_ALEN); - } else { -+ int size = ALIGN(sizeof(*sdata) + local->hw.vif_data_size, -+ sizeof(void *)); -+ int txq_size = 0; -+ -+ if (local->ops->wake_tx_queue) -+ txq_size += sizeof(struct txq_info) + -+ local->hw.txq_data_size; -+ - if (local->hw.queues >= IEEE80211_NUM_ACS) - txqs = IEEE80211_NUM_ACS; - -- ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size, -+ ndev = alloc_netdev_mqs(size + txq_size, - name, NET_NAME_UNKNOWN, - ieee80211_if_setup, txqs, 1); - if (!ndev) -@@ -1731,6 +1747,11 @@ int ieee80211_if_add(struct ieee80211_lo - memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN); - memcpy(sdata->name, ndev->name, IFNAMSIZ); - -+ if (txq_size) { -+ txqi = netdev_priv(ndev) + size; -+ ieee80211_init_tx_queue(sdata, NULL, txqi, 0); -+ } -+ - sdata->dev = ndev; - } - ---- a/net/mac80211/main.c -+++ b/net/mac80211/main.c -@@ -1019,6 +1019,9 @@ int ieee80211_register_hw(struct ieee802 - - local->dynamic_ps_forced_timeout = -1; - -+ if (!local->hw.txq_ac_max_pending) -+ local->hw.txq_ac_max_pending = 64; -+ - result = ieee80211_wep_init(local); - if (result < 0) - wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n", ---- a/net/mac80211/sta_info.c -+++ b/net/mac80211/sta_info.c -@@ -118,6 +118,16 @@ static void __cleanup_single_sta(struct - atomic_dec(&ps->num_sta_ps); - } - -+ if (sta->sta.txq[0]) { -+ for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) { -+ struct txq_info *txqi = to_txq_info(sta->sta.txq[i]); -+ int n = skb_queue_len(&txqi->queue); -+ -+ ieee80211_purge_tx_queue(&local->hw, &txqi->queue); -+ atomic_sub(n, &sdata->txqs_len[txqi->txq.ac]); -+ } -+ } -+ - for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { - local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]); - ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]); -@@ -234,6 +244,8 @@ void sta_info_free(struct ieee80211_loca - - sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr); - -+ if (sta->sta.txq[0]) -+ kfree(to_txq_info(sta->sta.txq[0])); - kfree(rcu_dereference_raw(sta->sta.rates)); - kfree(sta); - } -@@ -285,11 +297,12 @@ struct sta_info *sta_info_alloc(struct i - const u8 *addr, gfp_t gfp) - { - struct ieee80211_local *local = sdata->local; -+ struct ieee80211_hw *hw = &local->hw; - struct sta_info *sta; - struct timespec uptime; - int i; - -- sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp); -+ sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp); - if (!sta) - return NULL; - -@@ -321,11 +334,25 @@ struct sta_info *sta_info_alloc(struct i - for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++) - ewma_init(&sta->chain_signal_avg[i], 1024, 8); - -- if (sta_prepare_rate_control(local, sta, gfp)) { -- kfree(sta); -- return NULL; -+ if (local->ops->wake_tx_queue) { -+ void *txq_data; -+ int size = sizeof(struct txq_info) + -+ ALIGN(hw->txq_data_size, sizeof(void *)); -+ -+ txq_data = kcalloc(ARRAY_SIZE(sta->sta.txq), size, gfp); -+ if (!txq_data) -+ goto free; -+ -+ for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) { -+ struct txq_info *txq = txq_data + i * size; -+ -+ ieee80211_init_tx_queue(sdata, sta, txq, i); -+ } - } - -+ if (sta_prepare_rate_control(local, sta, gfp)) -+ goto free_txq; -+ - for (i = 0; i < IEEE80211_NUM_TIDS; i++) { - /* - * timer_to_tid must be initialized with identity mapping -@@ -346,7 +373,7 @@ struct sta_info *sta_info_alloc(struct i - if (sdata->vif.type == NL80211_IFTYPE_AP || - sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { - struct ieee80211_supported_band *sband = -- local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)]; -+ hw->wiphy->bands[ieee80211_get_sdata_band(sdata)]; - u8 smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> - IEEE80211_HT_CAP_SM_PS_SHIFT; - /* -@@ -371,6 +398,13 @@ struct sta_info *sta_info_alloc(struct i - sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); - - return sta; -+ -+free_txq: -+ if (sta->sta.txq[0]) -+ kfree(to_txq_info(sta->sta.txq[0])); -+free: -+ kfree(sta); -+ return NULL; - } - - static int sta_info_insert_check(struct sta_info *sta) -@@ -640,6 +674,8 @@ static void __sta_info_recalc_tim(struct - - indicate_tim |= - sta->driver_buffered_tids & tids; -+ indicate_tim |= -+ sta->txq_buffered_tids & tids; - } - - done: -@@ -1071,7 +1107,7 @@ void ieee80211_sta_ps_deliver_wakeup(str - struct ieee80211_sub_if_data *sdata = sta->sdata; - struct ieee80211_local *local = sdata->local; - struct sk_buff_head pending; -- int filtered = 0, buffered = 0, ac; -+ int filtered = 0, buffered = 0, ac, i; - unsigned long flags; - struct ps_data *ps; - -@@ -1090,10 +1126,22 @@ void ieee80211_sta_ps_deliver_wakeup(str - - BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1); - sta->driver_buffered_tids = 0; -+ sta->txq_buffered_tids = 0; - - if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS)) - drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta); - -+ if (sta->sta.txq[0]) { -+ for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) { -+ struct txq_info *txqi = to_txq_info(sta->sta.txq[i]); -+ -+ if (!skb_queue_len(&txqi->queue)) -+ continue; -+ -+ drv_wake_tx_queue(local, txqi); -+ } -+ } -+ - skb_queue_head_init(&pending); - - /* sync with ieee80211_tx_h_unicast_ps_buf */ -@@ -1275,8 +1323,10 @@ ieee80211_sta_ps_deliver_response(struct - /* if we already have frames from software, then we can't also - * release from hardware queues - */ -- if (skb_queue_empty(&frames)) -+ if (skb_queue_empty(&frames)) { - driver_release_tids |= sta->driver_buffered_tids & tids; -+ driver_release_tids |= sta->txq_buffered_tids & tids; -+ } - - if (driver_release_tids) { - /* If the driver has data on more than one TID then -@@ -1447,6 +1497,9 @@ ieee80211_sta_ps_deliver_response(struct - - sta_info_recalc_tim(sta); - } else { -+ unsigned long tids = sta->txq_buffered_tids & driver_release_tids; -+ int tid; -+ - /* - * We need to release a frame that is buffered somewhere in the - * driver ... it'll have to handle that. -@@ -1466,8 +1519,22 @@ ieee80211_sta_ps_deliver_response(struct - * that the TID(s) became empty before returning here from the - * release function. - * Either way, however, when the driver tells us that the TID(s) -- * became empty we'll do the TIM recalculation. -+ * became empty or we find that a txq became empty, we'll do the -+ * TIM recalculation. - */ -+ -+ if (!sta->sta.txq[0]) -+ return; -+ -+ for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) { -+ struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]); -+ -+ if (!(tids & BIT(tid)) || skb_queue_len(&txqi->queue)) -+ continue; -+ -+ sta_info_recalc_tim(sta); -+ break; -+ } - } - } - ---- a/net/mac80211/sta_info.h -+++ b/net/mac80211/sta_info.h -@@ -274,6 +274,7 @@ struct sta_ampdu_mlme { - * entered power saving state, these are also delivered to - * the station when it leaves powersave or polls for frames - * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on -+ * @txq_buffered_tids: bitmap of TIDs that mac80211 has txq data buffered on - * @rx_packets: Number of MSDUs received from this STA - * @rx_bytes: Number of bytes received from this STA - * @last_rx: time (in jiffies) when last frame was received from this STA -@@ -368,6 +369,7 @@ struct sta_info { - struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS]; - struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS]; - unsigned long driver_buffered_tids; -+ unsigned long txq_buffered_tids; - - /* Updated from RX path only, no locking requirements */ - unsigned long rx_packets; ---- a/net/mac80211/trace.h -+++ b/net/mac80211/trace.h -@@ -2312,6 +2312,37 @@ TRACE_EVENT(drv_tdls_recv_channel_switch - ) - ); - -+TRACE_EVENT(drv_wake_tx_queue, -+ TP_PROTO(struct ieee80211_local *local, -+ struct ieee80211_sub_if_data *sdata, -+ struct txq_info *txq), -+ -+ TP_ARGS(local, sdata, txq), -+ -+ TP_STRUCT__entry( -+ LOCAL_ENTRY -+ VIF_ENTRY -+ STA_ENTRY -+ __field(u8, ac) -+ __field(u8, tid) -+ ), -+ -+ TP_fast_assign( -+ struct ieee80211_sta *sta = txq->txq.sta; -+ -+ LOCAL_ASSIGN; -+ VIF_ASSIGN; -+ STA_ASSIGN; -+ __entry->ac = txq->txq.ac; -+ __entry->tid = txq->txq.tid; -+ ), -+ -+ TP_printk( -+ LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " ac:%d tid:%d", -+ LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->ac, __entry->tid -+ ) -+); -+ - #ifdef CPTCFG_MAC80211_MESSAGE_TRACING - #undef TRACE_SYSTEM - #define TRACE_SYSTEM mac80211_msg ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -776,12 +776,22 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021 - return TX_CONTINUE; - } - -+static __le16 ieee80211_tx_next_seq(struct sta_info *sta, int tid) -+{ -+ u16 *seq = &sta->tid_seq[tid]; -+ __le16 ret = cpu_to_le16(*seq); -+ -+ /* Increase the sequence number. */ -+ *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ; -+ -+ return ret; -+} -+ - static ieee80211_tx_result debug_noinline - ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx) - { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; -- u16 *seq; - u8 *qc; - int tid; - -@@ -832,13 +842,10 @@ ieee80211_tx_h_sequence(struct ieee80211 - - qc = ieee80211_get_qos_ctl(hdr); - tid = *qc & IEEE80211_QOS_CTL_TID_MASK; -- seq = &tx->sta->tid_seq[tid]; - tx->sta->tx_msdu[tid]++; - -- hdr->seq_ctrl = cpu_to_le16(*seq); -- -- /* Increase the sequence number. */ -- *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ; -+ if (!tx->sta->sta.txq[0]) -+ hdr->seq_ctrl = ieee80211_tx_next_seq(tx->sta, tid); - - return TX_CONTINUE; - } -@@ -1067,7 +1074,7 @@ static bool ieee80211_tx_prep_agg(struct - * nothing -- this aggregation session is being started - * but that might still fail with the driver - */ -- } else { -+ } else if (!tx->sta->sta.txq[tid]) { - spin_lock(&tx->sta->lock); - /* - * Need to re-check now, because we may get here -@@ -1201,13 +1208,102 @@ ieee80211_tx_prepare(struct ieee80211_su - return TX_CONTINUE; - } - -+static void ieee80211_drv_tx(struct ieee80211_local *local, -+ struct ieee80211_vif *vif, -+ struct ieee80211_sta *pubsta, -+ struct sk_buff *skb) -+{ -+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; -+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); -+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); -+ struct ieee80211_tx_control control = { -+ .sta = pubsta, -+ }; -+ struct ieee80211_txq *txq = NULL; -+ struct txq_info *txqi; -+ u8 ac; -+ -+ if (info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE) -+ goto tx_normal; -+ -+ if (!ieee80211_is_data(hdr->frame_control)) -+ goto tx_normal; -+ -+ if (pubsta) { -+ u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; -+ -+ txq = pubsta->txq[tid]; -+ } else if (vif) { -+ txq = vif->txq; -+ } -+ -+ if (!txq) -+ goto tx_normal; -+ -+ ac = txq->ac; -+ txqi = to_txq_info(txq); -+ atomic_inc(&sdata->txqs_len[ac]); -+ if (atomic_read(&sdata->txqs_len[ac]) >= local->hw.txq_ac_max_pending) -+ netif_stop_subqueue(sdata->dev, ac); -+ -+ skb_queue_tail(&txqi->queue, skb); -+ drv_wake_tx_queue(local, txqi); -+ -+ return; -+ -+tx_normal: -+ drv_tx(local, &control, skb); -+} -+ -+struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, -+ struct ieee80211_txq *txq) -+{ -+ struct ieee80211_local *local = hw_to_local(hw); -+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->vif); -+ struct txq_info *txqi = container_of(txq, struct txq_info, txq); -+ struct ieee80211_hdr *hdr; -+ struct sk_buff *skb = NULL; -+ u8 ac = txq->ac; -+ -+ spin_lock_bh(&txqi->queue.lock); -+ -+ if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags)) -+ goto out; -+ -+ skb = __skb_dequeue(&txqi->queue); -+ if (!skb) -+ goto out; -+ -+ atomic_dec(&sdata->txqs_len[ac]); -+ if (__netif_subqueue_stopped(sdata->dev, ac)) -+ ieee80211_propagate_queue_wake(local, sdata->vif.hw_queue[ac]); -+ -+ hdr = (struct ieee80211_hdr *)skb->data; -+ if (txq->sta && ieee80211_is_data_qos(hdr->frame_control)) { -+ struct sta_info *sta = container_of(txq->sta, struct sta_info, -+ sta); -+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); -+ -+ hdr->seq_ctrl = ieee80211_tx_next_seq(sta, txq->tid); -+ if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags)) -+ info->flags |= IEEE80211_TX_CTL_AMPDU; -+ else -+ info->flags &= ~IEEE80211_TX_CTL_AMPDU; -+ } -+ -+out: -+ spin_unlock_bh(&txqi->queue.lock); -+ -+ return skb; -+} -+EXPORT_SYMBOL(ieee80211_tx_dequeue); -+ - static bool ieee80211_tx_frags(struct ieee80211_local *local, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct sk_buff_head *skbs, - bool txpending) - { -- struct ieee80211_tx_control control; - struct sk_buff *skb, *tmp; - unsigned long flags; - -@@ -1265,10 +1361,9 @@ static bool ieee80211_tx_frags(struct ie - spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); - - info->control.vif = vif; -- control.sta = sta; - - __skb_unlink(skb, skbs); -- drv_tx(local, &control, skb); -+ ieee80211_drv_tx(local, vif, sta, skb); - } - - return true; ---- a/net/mac80211/util.c -+++ b/net/mac80211/util.c -@@ -308,6 +308,11 @@ void ieee80211_propagate_queue_wake(stru - for (ac = 0; ac < n_acs; ac++) { - int ac_queue = sdata->vif.hw_queue[ac]; - -+ if (local->ops->wake_tx_queue && -+ (atomic_read(&sdata->txqs_len[ac]) > -+ local->hw.txq_ac_max_pending)) -+ continue; -+ - if (ac_queue == queue || - (sdata->vif.cab_queue == queue && - local->queue_stop_reasons[ac_queue] == 0 && -@@ -3307,3 +3312,20 @@ u8 *ieee80211_add_wmm_info_ie(u8 *buf, u - - return buf; - } -+ -+void ieee80211_init_tx_queue(struct ieee80211_sub_if_data *sdata, -+ struct sta_info *sta, -+ struct txq_info *txqi, int tid) -+{ -+ skb_queue_head_init(&txqi->queue); -+ txqi->txq.vif = &sdata->vif; -+ -+ if (sta) { -+ txqi->txq.sta = &sta->sta; -+ sta->sta.txq[tid] = &txqi->txq; -+ txqi->txq.ac = ieee802_1d_to_ac[tid & 7]; -+ } else { -+ sdata->vif.txq = &txqi->txq; -+ txqi->txq.ac = IEEE80211_AC_BE; -+ } -+} ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -1176,6 +1176,7 @@ static void sta_ps_start(struct sta_info - struct ieee80211_sub_if_data *sdata = sta->sdata; - struct ieee80211_local *local = sdata->local; - struct ps_data *ps; -+ int tid; - - if (sta->sdata->vif.type == NL80211_IFTYPE_AP || - sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) -@@ -1189,6 +1190,18 @@ static void sta_ps_start(struct sta_info - drv_sta_notify(local, sdata, STA_NOTIFY_SLEEP, &sta->sta); - ps_dbg(sdata, "STA %pM aid %d enters power save mode\n", - sta->sta.addr, sta->sta.aid); -+ -+ if (!sta->sta.txq[0]) -+ return; -+ -+ for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) { -+ struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]); -+ -+ if (!skb_queue_len(&txqi->queue)) -+ set_bit(tid, &sta->txq_buffered_tids); -+ else -+ clear_bit(tid, &sta->txq_buffered_tids); -+ } - } - - static void sta_ps_end(struct sta_info *sta) ---- a/net/mac80211/agg-tx.c -+++ b/net/mac80211/agg-tx.c -@@ -188,6 +188,43 @@ ieee80211_wake_queue_agg(struct ieee8021 - __release(agg_queue); - } - -+static void -+ieee80211_agg_stop_txq(struct sta_info *sta, int tid) -+{ -+ struct ieee80211_txq *txq = sta->sta.txq[tid]; -+ struct txq_info *txqi; -+ -+ if (!txq) -+ return; -+ -+ txqi = to_txq_info(txq); -+ -+ /* Lock here to protect against further seqno updates on dequeue */ -+ spin_lock_bh(&txqi->queue.lock); -+ set_bit(IEEE80211_TXQ_STOP, &txqi->flags); -+ spin_unlock_bh(&txqi->queue.lock); -+} -+ -+static void -+ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable) -+{ -+ struct ieee80211_txq *txq = sta->sta.txq[tid]; -+ struct txq_info *txqi; -+ -+ if (!txq) -+ return; -+ -+ txqi = to_txq_info(txq); -+ -+ if (enable) -+ set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags); -+ else -+ clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags); -+ -+ clear_bit(IEEE80211_TXQ_STOP, &txqi->flags); -+ drv_wake_tx_queue(sta->sdata->local, txqi); -+} -+ - /* - * splice packets from the STA's pending to the local pending, - * requires a call to ieee80211_agg_splice_finish later -@@ -247,6 +284,7 @@ static void ieee80211_remove_tid_tx(stru - ieee80211_assign_tid_tx(sta, tid, NULL); - - ieee80211_agg_splice_finish(sta->sdata, tid); -+ ieee80211_agg_start_txq(sta, tid, false); - - kfree_rcu(tid_tx, rcu_head); - } -@@ -418,6 +456,8 @@ void ieee80211_tx_ba_session_handle_star - */ - clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state); - -+ ieee80211_agg_stop_txq(sta, tid); -+ - /* - * Make sure no packets are being processed. This ensures that - * we have a valid starting sequence number and that in-flight -@@ -440,6 +480,8 @@ void ieee80211_tx_ba_session_handle_star - ieee80211_agg_splice_finish(sdata, tid); - spin_unlock_bh(&sta->lock); - -+ ieee80211_agg_start_txq(sta, tid, false); -+ - kfree_rcu(tid_tx, rcu_head); - return; - } -@@ -666,6 +708,8 @@ static void ieee80211_agg_tx_operational - ieee80211_agg_splice_finish(sta->sdata, tid); - - spin_unlock_bh(&sta->lock); -+ -+ ieee80211_agg_start_txq(sta, tid, true); - } - - void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid) diff --git a/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch b/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch new file mode 100644 index 0000000000..a160dc4f02 --- /dev/null +++ b/package/kernel/mac80211/patches/301-ath9k-limit-retries-for-powersave-response-frames.patch @@ -0,0 +1,121 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Thu, 2 Jul 2015 15:20:56 +0200 +Subject: [PATCH] ath9k: limit retries for powersave response frames + +In some cases, the channel might be busy enough that an ath9k AP's +response to PS-Poll frames might be too slow and the station has already +gone to sleep. To avoid wasting too much airtime on this, limit the +number of retries on such frames and ensure that no sample rate gets +used. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/xmit.c ++++ b/drivers/net/wireless/ath/ath9k/xmit.c +@@ -136,10 +136,25 @@ static void ath_send_bar(struct ath_atx_ + } + + static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta, +- struct ath_buf *bf) ++ struct ath_buf *bf, bool ps) + { ++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu); ++ ++ if (ps) { ++ /* Clear the first rate to avoid using a sample rate for PS frames */ ++ info->control.rates[0].idx = -1; ++ info->control.rates[0].count = 0; ++ } ++ + ieee80211_get_tx_rates(vif, sta, bf->bf_mpdu, bf->rates, + ARRAY_SIZE(bf->rates)); ++ if (!ps) ++ return; ++ ++ if (bf->rates[0].count > 2) ++ bf->rates[0].count = 2; ++ ++ bf->rates[1].idx = -1; + } + + static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq, +@@ -1419,7 +1434,7 @@ ath_tx_form_burst(struct ath_softc *sc, + if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) + break; + +- ath_set_rates(tid->an->vif, tid->an->sta, bf); ++ ath_set_rates(tid->an->vif, tid->an->sta, bf, false); + } while (1); + } + +@@ -1450,7 +1465,7 @@ static bool ath_tx_sched_aggr(struct ath + return false; + } + +- ath_set_rates(tid->an->vif, tid->an->sta, bf); ++ ath_set_rates(tid->an->vif, tid->an->sta, bf, false); + if (aggr) + last = ath_tx_form_aggr(sc, txq, tid, &bf_q, bf, + tid_q, &aggr_len); +@@ -1647,7 +1662,7 @@ void ath9k_release_buffered_frames(struc + + __skb_unlink(bf->bf_mpdu, tid_q); + list_add_tail(&bf->list, &bf_q); +- ath_set_rates(tid->an->vif, tid->an->sta, bf); ++ ath_set_rates(tid->an->vif, tid->an->sta, bf, true); + if (bf_isampdu(bf)) { + ath_tx_addto_baw(sc, tid, bf); + bf->bf_state.bf_type &= ~BUF_AGGR; +@@ -2293,7 +2308,7 @@ int ath_tx_start(struct ieee80211_hw *hw + struct ath_txq *txq = txctl->txq; + struct ath_atx_tid *tid = NULL; + struct ath_buf *bf; +- bool queue, skip_uapsd = false, ps_resp; ++ bool queue, ps_resp; + int q, ret; + + if (vif) +@@ -2346,13 +2361,13 @@ int ath_tx_start(struct ieee80211_hw *hw + if (!txctl->an) + txctl->an = &avp->mcast_node; + queue = true; +- skip_uapsd = true; ++ ps_resp = false; + } + + if (txctl->an && queue) + tid = ath_get_skb_tid(sc, txctl->an, skb); + +- if (!skip_uapsd && ps_resp) { ++ if (ps_resp) { + ath_txq_unlock(sc, txq); + txq = sc->tx.uapsdq; + ath_txq_lock(sc, txq); +@@ -2390,7 +2405,7 @@ int ath_tx_start(struct ieee80211_hw *hw + if (txctl->paprd) + bf->bf_state.bfs_paprd_timestamp = jiffies; + +- ath_set_rates(vif, sta, bf); ++ ath_set_rates(vif, sta, bf, ps_resp); + ath_tx_send_normal(sc, txq, tid, skb); + + out: +@@ -2429,7 +2444,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw + break; + + bf->bf_lastbf = bf; +- ath_set_rates(vif, NULL, bf); ++ ath_set_rates(vif, NULL, bf, false); + ath_buf_set_rate(sc, bf, &info, fi->framelen, false); + duration += info.rates[0].PktDuration; + if (bf_tail) +@@ -2932,7 +2947,7 @@ int ath9k_tx99_send(struct ath_softc *sc + return -EINVAL; + } + +- ath_set_rates(sc->tx99_vif, NULL, bf); ++ ath_set_rates(sc->tx99_vif, NULL, bf, false); + + ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr); + ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum); diff --git a/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch b/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch deleted file mode 100644 index 465d94319d..0000000000 --- a/package/kernel/mac80211/patches/301-mac80211-lock-rate-control.patch +++ /dev/null @@ -1,125 +0,0 @@ -From: Johannes Berg <johannes.berg@intel.com> -Date: Wed, 11 Mar 2015 09:14:15 +0100 -Subject: [PATCH] mac80211: lock rate control - -Both minstrel (reported by Sven Eckelmann) and the iwlwifi rate -control aren't properly taking concurrency into account. It's -likely that the same is true for other rate control algorithms. - -In the case of minstrel this manifests itself in crashes when an -update and other data access are run concurrently, for example -when the stations change bandwidth or similar. In iwlwifi, this -can cause firmware crashes. - -Since fixing all rate control algorithms will be very difficult, -just provide locking for invocations. This protects the internal -data structures the algorithms maintain. - -I've manipulated hostapd to test this, by having it change its -advertised bandwidth roughly ever 150ms. At the same time, I'm -running a flood ping between the client and the AP, which causes -this race of update vs. get_rate/status to easily happen on the -client. With this change, the system survives this test. - -Reported-by: Sven Eckelmann <sven@open-mesh.com> -Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- - ---- a/net/mac80211/rate.c -+++ b/net/mac80211/rate.c -@@ -683,7 +683,13 @@ void rate_control_get_rate(struct ieee80 - if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) - return; - -- ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); -+ if (ista) { -+ spin_lock_bh(&sta->rate_ctrl_lock); -+ ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); -+ spin_unlock_bh(&sta->rate_ctrl_lock); -+ } else { -+ ref->ops->get_rate(ref->priv, NULL, NULL, txrc); -+ } - - if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_RC_TABLE) - return; ---- a/net/mac80211/rate.h -+++ b/net/mac80211/rate.h -@@ -42,10 +42,12 @@ static inline void rate_control_tx_statu - if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) - return; - -+ spin_lock_bh(&sta->rate_ctrl_lock); - if (ref->ops->tx_status) - ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb); - else - ref->ops->tx_status_noskb(ref->priv, sband, ista, priv_sta, info); -+ spin_unlock_bh(&sta->rate_ctrl_lock); - } - - static inline void -@@ -64,7 +66,9 @@ rate_control_tx_status_noskb(struct ieee - if (WARN_ON_ONCE(!ref->ops->tx_status_noskb)) - return; - -+ spin_lock_bh(&sta->rate_ctrl_lock); - ref->ops->tx_status_noskb(ref->priv, sband, ista, priv_sta, info); -+ spin_unlock_bh(&sta->rate_ctrl_lock); - } - - static inline void rate_control_rate_init(struct sta_info *sta) -@@ -91,8 +95,10 @@ static inline void rate_control_rate_ini - - sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band]; - -+ spin_lock_bh(&sta->rate_ctrl_lock); - ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista, - priv_sta); -+ spin_unlock_bh(&sta->rate_ctrl_lock); - rcu_read_unlock(); - set_sta_flag(sta, WLAN_STA_RATE_CONTROL); - } -@@ -115,18 +121,20 @@ static inline void rate_control_rate_upd - return; - } - -+ spin_lock_bh(&sta->rate_ctrl_lock); - ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def, - ista, priv_sta, changed); -+ spin_unlock_bh(&sta->rate_ctrl_lock); - rcu_read_unlock(); - } - drv_sta_rc_update(local, sta->sdata, &sta->sta, changed); - } - - static inline void *rate_control_alloc_sta(struct rate_control_ref *ref, -- struct ieee80211_sta *sta, -- gfp_t gfp) -+ struct sta_info *sta, gfp_t gfp) - { -- return ref->ops->alloc_sta(ref->priv, sta, gfp); -+ spin_lock_init(&sta->rate_ctrl_lock); -+ return ref->ops->alloc_sta(ref->priv, &sta->sta, gfp); - } - - static inline void rate_control_free_sta(struct sta_info *sta) ---- a/net/mac80211/sta_info.c -+++ b/net/mac80211/sta_info.c -@@ -286,7 +286,7 @@ static int sta_prepare_rate_control(stru - - sta->rate_ctrl = local->rate_ctrl; - sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl, -- &sta->sta, gfp); -+ sta, gfp); - if (!sta->rate_ctrl_priv) - return -ENOMEM; - ---- a/net/mac80211/sta_info.h -+++ b/net/mac80211/sta_info.h -@@ -349,6 +349,7 @@ struct sta_info { - u8 ptk_idx; - struct rate_control_ref *rate_ctrl; - void *rate_ctrl_priv; -+ spinlock_t rate_ctrl_lock; - spinlock_t lock; - - struct work_struct drv_deliver_wk; diff --git a/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch b/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch deleted file mode 100644 index e54e16eb05..0000000000 --- a/package/kernel/mac80211/patches/302-ath9k-restart-only-triggering-DFS-detector-line.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Zefir Kurtisi <zefir.kurtisi@neratec.com> -Date: Tue, 10 Mar 2015 17:49:29 +0100 -Subject: [PATCH] ath9k: restart only triggering DFS detector line - -To support HT40 DFS mode, a triggering detector must -reset only itself but not other detector lines. - -Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> ---- - ---- a/drivers/net/wireless/ath/dfs_pattern_detector.c -+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c -@@ -289,7 +289,7 @@ dpd_add_pulse(struct dfs_pattern_detecto - "count=%d, count_false=%d\n", - event->freq, pd->rs->type_id, - ps->pri, ps->count, ps->count_falses); -- channel_detector_reset(dpd, cd); -+ pd->reset(pd, dpd->last_pulse_ts); - return true; - } - } diff --git a/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch b/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch new file mode 100644 index 0000000000..22b987aa7a --- /dev/null +++ b/package/kernel/mac80211/patches/302-ath9k_hw-add-low-power-tx-gain-table-for-AR953x.patch @@ -0,0 +1,95 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Thu, 14 Jan 2016 03:14:03 +0100 +Subject: [PATCH] ath9k_hw: add low power tx gain table for AR953x + +Used in some newer TP-Link AR9533 devices. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c ++++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c +@@ -698,6 +698,9 @@ static void ar9003_tx_gain_table_mode2(s + else if (AR_SREV_9340(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9340Modes_low_ob_db_tx_gain_table_1p0); ++ else if (AR_SREV_9531_11(ah)) ++ INIT_INI_ARRAY(&ah->iniModesTxGain, ++ qca953x_1p1_modes_no_xpa_low_power_tx_gain_table); + else if (AR_SREV_9485_11_OR_LATER(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9485Modes_low_ob_db_tx_gain_1_1); +--- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h ++++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h +@@ -757,6 +757,71 @@ static const u32 qca953x_1p1_modes_xpa_t + {0x00016448, 0x6c927a70}, + }; + ++static const u32 qca953x_1p1_modes_no_xpa_low_power_tx_gain_table[][2] = { ++ /* Addr allmodes */ ++ {0x0000a2dc, 0xfff55592}, ++ {0x0000a2e0, 0xfff99924}, ++ {0x0000a2e4, 0xfffe1e00}, ++ {0x0000a2e8, 0xffffe000}, ++ {0x0000a410, 0x000050d6}, ++ {0x0000a500, 0x00000069}, ++ {0x0000a504, 0x0400006b}, ++ {0x0000a508, 0x0800006d}, ++ {0x0000a50c, 0x0c000269}, ++ {0x0000a510, 0x1000026b}, ++ {0x0000a514, 0x1400026d}, ++ {0x0000a518, 0x18000669}, ++ {0x0000a51c, 0x1c00066b}, ++ {0x0000a520, 0x1d000a68}, ++ {0x0000a524, 0x21000a6a}, ++ {0x0000a528, 0x25000a6c}, ++ {0x0000a52c, 0x29000a6e}, ++ {0x0000a530, 0x2d0012a9}, ++ {0x0000a534, 0x310012ab}, ++ {0x0000a538, 0x350012ad}, ++ {0x0000a53c, 0x39001b0a}, ++ {0x0000a540, 0x3d001b0c}, ++ {0x0000a544, 0x41001b0e}, ++ {0x0000a548, 0x43001bae}, ++ {0x0000a54c, 0x45001914}, ++ {0x0000a550, 0x47001916}, ++ {0x0000a554, 0x49001b96}, ++ {0x0000a558, 0x49001b96}, ++ {0x0000a55c, 0x49001b96}, ++ {0x0000a560, 0x49001b96}, ++ {0x0000a564, 0x49001b96}, ++ {0x0000a568, 0x49001b96}, ++ {0x0000a56c, 0x49001b96}, ++ {0x0000a570, 0x49001b96}, ++ {0x0000a574, 0x49001b96}, ++ {0x0000a578, 0x49001b96}, ++ {0x0000a57c, 0x49001b96}, ++ {0x0000a600, 0x00000000}, ++ {0x0000a604, 0x00000000}, ++ {0x0000a608, 0x00000000}, ++ {0x0000a60c, 0x00000000}, ++ {0x0000a610, 0x00000000}, ++ {0x0000a614, 0x00000000}, ++ {0x0000a618, 0x00804201}, ++ {0x0000a61c, 0x01408201}, ++ {0x0000a620, 0x01408502}, ++ {0x0000a624, 0x01408502}, ++ {0x0000a628, 0x01408502}, ++ {0x0000a62c, 0x01408502}, ++ {0x0000a630, 0x01408502}, ++ {0x0000a634, 0x01408502}, ++ {0x0000a638, 0x01408502}, ++ {0x0000a63c, 0x01408502}, ++ {0x0000b2dc, 0xfff55592}, ++ {0x0000b2e0, 0xfff99924}, ++ {0x0000b2e4, 0xfffe1e00}, ++ {0x0000b2e8, 0xffffe000}, ++ {0x00016044, 0x044922db}, ++ {0x00016048, 0x6c927a70}, ++ {0x00016444, 0x044922db}, ++ {0x00016448, 0x6c927a70}, ++}; ++ + static const u32 qca953x_2p0_baseband_core[][2] = { + /* Addr allmodes */ + {0x00009800, 0xafe68e30}, diff --git a/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch b/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch deleted file mode 100644 index ed268eacf9..0000000000 --- a/package/kernel/mac80211/patches/303-ath9k-add-DFS-support-for-extension-channel.patch +++ /dev/null @@ -1,76 +0,0 @@ -From: Zefir Kurtisi <zefir.kurtisi@neratec.com> -Date: Tue, 10 Mar 2015 17:49:30 +0100 -Subject: [PATCH] ath9k: add DFS support for extension channel - -In HT40 modes, pulse events on primary and extension -channel are processed individually. If valid, a pulse -event will be fed into the detector -* for primary frequency, or -* for extension frequency (+/-20MHz based on HT40-mode) -* or both - -With that, a 40MHz radar will result in two individual -radar events. - -Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> ---- - ---- a/drivers/net/wireless/ath/ath9k/dfs.c -+++ b/drivers/net/wireless/ath/ath9k/dfs.c -@@ -126,8 +126,19 @@ ath9k_postprocess_radar_event(struct ath - DFS_STAT_INC(sc, pulses_detected); - return true; - } --#undef PRI_CH_RADAR_FOUND --#undef EXT_CH_RADAR_FOUND -+ -+static void -+ath9k_dfs_process_radar_pulse(struct ath_softc *sc, struct pulse_event *pe) -+{ -+ struct dfs_pattern_detector *pd = sc->dfs_detector; -+ DFS_STAT_INC(sc, pulses_processed); -+ if (pd == NULL) -+ return; -+ if (!pd->add_pulse(pd, pe)) -+ return; -+ DFS_STAT_INC(sc, radar_detected); -+ ieee80211_radar_detected(sc->hw); -+} - - /* - * DFS: check PHY-error for radar pulse and feed the detector -@@ -176,18 +187,21 @@ void ath9k_dfs_process_phyerr(struct ath - ard.pulse_length_pri = vdata_end[-3]; - pe.freq = ah->curchan->channel; - pe.ts = mactime; -- if (ath9k_postprocess_radar_event(sc, &ard, &pe)) { -- struct dfs_pattern_detector *pd = sc->dfs_detector; -- ath_dbg(common, DFS, -- "ath9k_dfs_process_phyerr: channel=%d, ts=%llu, " -- "width=%d, rssi=%d, delta_ts=%llu\n", -- pe.freq, pe.ts, pe.width, pe.rssi, -- pe.ts - sc->dfs_prev_pulse_ts); -- sc->dfs_prev_pulse_ts = pe.ts; -- DFS_STAT_INC(sc, pulses_processed); -- if (pd != NULL && pd->add_pulse(pd, &pe)) { -- DFS_STAT_INC(sc, radar_detected); -- ieee80211_radar_detected(sc->hw); -- } -+ if (!ath9k_postprocess_radar_event(sc, &ard, &pe)) -+ return; -+ -+ ath_dbg(common, DFS, -+ "ath9k_dfs_process_phyerr: type=%d, freq=%d, ts=%llu, " -+ "width=%d, rssi=%d, delta_ts=%llu\n", -+ ard.pulse_bw_info, pe.freq, pe.ts, pe.width, pe.rssi, -+ pe.ts - sc->dfs_prev_pulse_ts); -+ sc->dfs_prev_pulse_ts = pe.ts; -+ if (ard.pulse_bw_info & PRI_CH_RADAR_FOUND) -+ ath9k_dfs_process_radar_pulse(sc, &pe); -+ if (ard.pulse_bw_info & EXT_CH_RADAR_FOUND) { -+ pe.freq += IS_CHAN_HT40PLUS(ah->curchan) ? 20 : -20; -+ ath9k_dfs_process_radar_pulse(sc, &pe); - } - } -+#undef PRI_CH_RADAR_FOUND -+#undef EXT_CH_RADAR_FOUND diff --git a/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch b/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch new file mode 100644 index 0000000000..7bb74353eb --- /dev/null +++ b/package/kernel/mac80211/patches/303-rt2x00-fix-monitor-mode-regression.patch @@ -0,0 +1,156 @@ +From: Eli Cooper <elicooper@gmx.com> +Date: Thu, 14 Jan 2016 00:07:12 +0800 +Subject: [PATCH] rt2x00: fix monitor mode regression + +Since commit df1404650ccbfeb76a84f301f22316be0d00a864 monitor mode for rt2x00 +has been made effectively useless because the hardware filter is configured to +drop packets whose intended recipient is not the device, regardless of the +presence of monitor mode interfaces. + +This patch fixes this regression by adding explicit monitor mode support, and +configuring the hardware filter accordingly. + +Signed-off-by: Eli Cooper <elicooper@gmx.com> +--- + +--- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c +@@ -273,8 +273,10 @@ static void rt2400pci_config_filter(stru + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); +- rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); ++ rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, ++ !rt2x00dev->is_monitoring); + rt2x00_set_field32(®, RXCSR0_DROP_TODS, ++ !rt2x00dev->is_monitoring && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); + rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); +--- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c +@@ -274,8 +274,10 @@ static void rt2500pci_config_filter(stru + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); +- rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); ++ rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, ++ !rt2x00dev->is_monitoring); + rt2x00_set_field32(®, RXCSR0_DROP_TODS, ++ !rt2x00dev->is_monitoring && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, RXCSR0_DROP_MCAST, +--- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c +@@ -437,8 +437,10 @@ static void rt2500usb_config_filter(stru + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, + !(filter_flags & FIF_CONTROL)); +- rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, 1); ++ rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, ++ !rt2x00dev->is_monitoring); + rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, ++ !rt2x00dev->is_monitoring && + !rt2x00dev->intf_ap_count); + rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); + rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -1490,7 +1490,8 @@ void rt2800_config_filter(struct rt2x00_ + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, + !(filter_flags & FIF_PLCPFAIL)); +- rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, 1); ++ rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, ++ !rt2x00dev->is_monitoring); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h +@@ -844,11 +844,13 @@ struct rt2x00_dev { + * - Open sta interface count. + * - Association count. + * - Beaconing enabled count. ++ * - Whether the device is monitoring. + */ + unsigned int intf_ap_count; + unsigned int intf_sta_count; + unsigned int intf_associated; + unsigned int intf_beaconing; ++ bool is_monitoring; + + /* + * Interface combinations +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00config.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00config.c +@@ -244,6 +244,16 @@ void rt2x00lib_config(struct rt2x00_dev + (ieee80211_flags & IEEE80211_CONF_CHANGE_PS)) + cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); + ++ if (ieee80211_flags & IEEE80211_CONF_CHANGE_MONITOR) { ++ if (conf->flags & IEEE80211_CONF_MONITOR) { ++ rt2x00_dbg(rt2x00dev, "Monitor mode is enabled\n"); ++ rt2x00dev->is_monitoring = true; ++ } else { ++ rt2x00_dbg(rt2x00dev, "Monitor mode is disabled\n"); ++ rt2x00dev->is_monitoring = false; ++ } ++ } ++ + /* + * Start configuration. + */ +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +@@ -1204,6 +1204,7 @@ int rt2x00lib_start(struct rt2x00_dev *r + rt2x00dev->intf_ap_count = 0; + rt2x00dev->intf_sta_count = 0; + rt2x00dev->intf_associated = 0; ++ rt2x00dev->is_monitoring = false; + + /* Enable the radio */ + retval = rt2x00lib_enable_radio(rt2x00dev); +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c +@@ -385,11 +385,6 @@ void rt2x00mac_configure_filter(struct i + *total_flags |= FIF_PSPOLL; + } + +- /* +- * Check if there is any work left for us. +- */ +- if (rt2x00dev->packet_filter == *total_flags) +- return; + rt2x00dev->packet_filter = *total_flags; + + rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); +--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c +@@ -530,8 +530,10 @@ static void rt61pci_config_filter(struct + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, + !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); +- rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, 1); ++ rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, ++ !rt2x00dev->is_monitoring); + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, ++ !rt2x00dev->is_monitoring && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, +--- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c +@@ -480,8 +480,10 @@ static void rt73usb_config_filter(struct + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, + !(filter_flags & (FIF_CONTROL | FIF_PSPOLL))); +- rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, 1); ++ rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, ++ !rt2x00dev->is_monitoring); + rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, ++ !rt2x00dev->is_monitoring && + !rt2x00dev->intf_ap_count); + rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); + rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, diff --git a/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch b/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch deleted file mode 100644 index e1eab64ebe..0000000000 --- a/package/kernel/mac80211/patches/304-ath9k-allow-40MHz-radar-detection-width.patch +++ /dev/null @@ -1,19 +0,0 @@ -From: Zefir Kurtisi <zefir.kurtisi@neratec.com> -Date: Tue, 10 Mar 2015 17:49:31 +0100 -Subject: [PATCH] ath9k: allow 40MHz radar detection width - -Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> ---- - ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -763,7 +763,8 @@ static const struct ieee80211_iface_comb - .num_different_channels = 1, - .beacon_int_infra_match = true, - .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | -- BIT(NL80211_CHAN_WIDTH_20), -+ BIT(NL80211_CHAN_WIDTH_20) | -+ BIT(NL80211_CHAN_WIDTH_40), - } - #endif - }; diff --git a/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch b/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch new file mode 100644 index 0000000000..049059aa24 --- /dev/null +++ b/package/kernel/mac80211/patches/304-ath9k-avoid-ANI-restart-if-no-trigger.patch @@ -0,0 +1,32 @@ +From: Miaoqing Pan <miaoqing@codeaurora.org> +Date: Fri, 15 Jan 2016 18:17:17 +0800 +Subject: [PATCH] ath9k: avoid ANI restart if no trigger + +Fixes commit 54da20d83f0e ("ath9k_hw: improve ANI processing and rx desensitizing parameters") + +Call ath9k_ani_restart() only when the phy error rate reach the +ANI immunity threshold. Sync the logic with internal code base. + +Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/ani.c ++++ b/drivers/net/wireless/ath/ath9k/ani.c +@@ -444,14 +444,16 @@ void ath9k_hw_ani_monitor(struct ath_hw + ofdmPhyErrRate < ah->config.ofdm_trig_low) { + ath9k_hw_ani_lower_immunity(ah); + aniState->ofdmsTurn = !aniState->ofdmsTurn; ++ ath9k_ani_restart(ah); + } else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) { + ath9k_hw_ani_ofdm_err_trigger(ah); + aniState->ofdmsTurn = false; ++ ath9k_ani_restart(ah); + } else if (cckPhyErrRate > ah->config.cck_trig_high) { + ath9k_hw_ani_cck_err_trigger(ah); + aniState->ofdmsTurn = true; ++ ath9k_ani_restart(ah); + } +- ath9k_ani_restart(ah); + } + } + EXPORT_SYMBOL(ath9k_hw_ani_monitor); diff --git a/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch b/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch deleted file mode 100644 index 4cfa53f6c0..0000000000 --- a/package/kernel/mac80211/patches/305-ath5k-channel-change-fix.patch +++ /dev/null @@ -1,137 +0,0 @@ -From: Sergey Ryazanov <ryazanov.s.a@gmail.com> -Date: Wed, 4 Mar 2015 05:12:10 +0300 -Subject: [PATCH] ath5k: channel change fix - -ath5k updates the channel pointer and after that it stops the Rx logic -and apply channel to HW. In case of channel switch, such sequence -creates a small window when a frame, which is received on the old -channel is considered as a frame received on the new one. - -The most notable consequence of this situation occurs during the switch -from 2 GHz band (CCK+OFDM) to the 5GHz band (OFDM-only). Frame received -with CCK rate, e.g. beacon received at the 1mbps, causes the following -warning: - - WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]() - invalid hw_rix: 1a - [..] - Call Trace: - [<802656a8>] show_stack+0x48/0x70 - [<802dd92c>] warn_slowpath_common+0x88/0xbc - [<802dd98c>] warn_slowpath_fmt+0x2c/0x38 - [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k] - [<8028ac64>] tasklet_action+0x8c/0xf0 - [<80075804>] __do_softirq+0x180/0x32c - [<80196ce8>] irq_exit+0x54/0x70 - [<80041848>] ret_from_irq+0x0/0x4 - [<80182fdc>] ioread32+0x4/0xc - [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k] - [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k] - [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k] - [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k] - [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211] - [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211] - [<8022c3f4>] process_one_work+0x28c/0x400 - [<802df8f8>] worker_thread+0x258/0x3c0 - [<801b5710>] kthread+0xe0/0xec - [<800418a8>] ret_from_kernel_thread+0x14/0x1c - -The easiest way to reproduce this warning is to run scan with dualband -NIC in noisy environments, when the channel 11 runs multiple APs. In my -tests if the APs num >= 12, the warning appears in the first few -seconds of scanning. - -In order to fix this, the Rx disable code moved to a higher level and -placed before the channel pointer update. This is also makes the code a -bit more symmetrical, since we disable and enable the Rx in the same -function. - -In fact, at the pointer update time new frames should not appear, -because interrupt generation at this point should already be disabled. -The next patch should address this issue. - -CC: Jiri Slaby <jirislaby@gmail.com> -CC: Nick Kossifidis <mickflemm@gmail.com> -CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> -Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com> -Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com> -Tested-by: Eric Bree <ebree@nltinc.com> -Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> ---- - ---- a/drivers/net/wireless/ath/ath5k/base.c -+++ b/drivers/net/wireless/ath/ath5k/base.c -@@ -2858,7 +2858,7 @@ ath5k_reset(struct ath5k_hw *ah, struct - { - struct ath_common *common = ath5k_hw_common(ah); - int ret, ani_mode; -- bool fast; -+ bool fast = chan && modparam_fastchanswitch ? 1 : 0; - - ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n"); - -@@ -2876,11 +2876,29 @@ ath5k_reset(struct ath5k_hw *ah, struct - * so we should also free any remaining - * tx buffers */ - ath5k_drain_tx_buffs(ah); -+ -+ /* Stop PCU */ -+ ath5k_hw_stop_rx_pcu(ah); -+ -+ /* Stop DMA -+ * -+ * Note: If DMA didn't stop continue -+ * since only a reset will fix it. -+ */ -+ ret = ath5k_hw_dma_stop(ah); -+ -+ /* RF Bus grant won't work if we have pending -+ * frames -+ */ -+ if (ret && fast) { -+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, -+ "DMA didn't stop, falling back to normal reset\n"); -+ fast = false; -+ } -+ - if (chan) - ah->curchan = chan; - -- fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0; -- - ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu); - if (ret) { - ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret); ---- a/drivers/net/wireless/ath/ath5k/reset.c -+++ b/drivers/net/wireless/ath/ath5k/reset.c -@@ -1169,30 +1169,6 @@ ath5k_hw_reset(struct ath5k_hw *ah, enum - if (ah->ah_version == AR5K_AR5212) - ath5k_hw_set_sleep_clock(ah, false); - -- /* -- * Stop PCU -- */ -- ath5k_hw_stop_rx_pcu(ah); -- -- /* -- * Stop DMA -- * -- * Note: If DMA didn't stop continue -- * since only a reset will fix it. -- */ -- ret = ath5k_hw_dma_stop(ah); -- -- /* RF Bus grant won't work if we have pending -- * frames */ -- if (ret && fast) { -- ATH5K_DBG(ah, ATH5K_DEBUG_RESET, -- "DMA didn't stop, falling back to normal reset\n"); -- fast = false; -- /* Non fatal, just continue with -- * normal reset */ -- ret = 0; -- } -- - mode = channel->hw_value; - switch (mode) { - case AR5K_MODE_11A: diff --git a/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch b/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch new file mode 100644 index 0000000000..a1ac67c828 --- /dev/null +++ b/package/kernel/mac80211/patches/305-ath9k-clean-up-ANI-per-channel-pointer-checking.patch @@ -0,0 +1,91 @@ +From: Miaoqing Pan <miaoqing@codeaurora.org> +Date: Fri, 15 Jan 2016 18:17:18 +0800 +Subject: [PATCH] ath9k: clean up ANI per-channel pointer checking + +commit c24bd3620c50 ("ath9k: Do not maintain ANI state per-channel") +removed per-channel handling, the code to check 'curchan' also +should be removed as never used. + +Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/ani.c ++++ b/drivers/net/wireless/ath/ath9k/ani.c +@@ -126,12 +126,8 @@ static void ath9k_hw_update_mibstats(str + + static void ath9k_ani_restart(struct ath_hw *ah) + { +- struct ar5416AniState *aniState; +- +- if (!ah->curchan) +- return; ++ struct ar5416AniState *aniState = &ah->ani; + +- aniState = &ah->ani; + aniState->listenTime = 0; + + ENABLE_REGWRITE_BUFFER(ah); +@@ -221,12 +217,7 @@ static void ath9k_hw_set_ofdm_nil(struct + + static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah) + { +- struct ar5416AniState *aniState; +- +- if (!ah->curchan) +- return; +- +- aniState = &ah->ani; ++ struct ar5416AniState *aniState = &ah->ani; + + if (aniState->ofdmNoiseImmunityLevel < ATH9K_ANI_OFDM_MAX_LEVEL) + ath9k_hw_set_ofdm_nil(ah, aniState->ofdmNoiseImmunityLevel + 1, false); +@@ -281,12 +272,7 @@ static void ath9k_hw_set_cck_nil(struct + + static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah) + { +- struct ar5416AniState *aniState; +- +- if (!ah->curchan) +- return; +- +- aniState = &ah->ani; ++ struct ar5416AniState *aniState = &ah->ani; + + if (aniState->cckNoiseImmunityLevel < ATH9K_ANI_CCK_MAX_LEVEL) + ath9k_hw_set_cck_nil(ah, aniState->cckNoiseImmunityLevel + 1, +@@ -299,9 +285,7 @@ static void ath9k_hw_ani_cck_err_trigger + */ + static void ath9k_hw_ani_lower_immunity(struct ath_hw *ah) + { +- struct ar5416AniState *aniState; +- +- aniState = &ah->ani; ++ struct ar5416AniState *aniState = &ah->ani; + + /* lower OFDM noise immunity */ + if (aniState->ofdmNoiseImmunityLevel > 0 && +@@ -329,7 +313,7 @@ void ath9k_ani_reset(struct ath_hw *ah, + struct ath_common *common = ath9k_hw_common(ah); + int ofdm_nil, cck_nil; + +- if (!ah->curchan) ++ if (!chan) + return; + + BUG_ON(aniState == NULL); +@@ -416,14 +400,10 @@ static bool ath9k_hw_ani_read_counters(s + + void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan) + { +- struct ar5416AniState *aniState; ++ struct ar5416AniState *aniState = &ah->ani; + struct ath_common *common = ath9k_hw_common(ah); + u32 ofdmPhyErrRate, cckPhyErrRate; + +- if (!ah->curchan) +- return; +- +- aniState = &ah->ani; + if (!ath9k_hw_ani_read_counters(ah)) + return; + diff --git a/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch b/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch deleted file mode 100644 index 85a190481b..0000000000 --- a/package/kernel/mac80211/patches/306-ath5k-fix-reset-race.patch +++ /dev/null @@ -1,96 +0,0 @@ -From: Sergey Ryazanov <ryazanov.s.a@gmail.com> -Date: Wed, 4 Mar 2015 05:12:11 +0300 -Subject: [PATCH] ath5k: fix reset race - -To prepare for reset ath5k should finish all asynchronous tasks. At -first, it disables the interrupt generation, then it waits for the -interrupt handler and tasklets completion, and then proceeds to the HW -configuration update. But it does not consider that the interrupt -handler or tasklet re-enables the interrupt generation. And we fall in a -situation when ath5k assumes that interrupts are disabled, but it is -not. - -This can lead to different consequences, such as reception of the frame, -when we do not expect it. Under certain circumstances, this can lead to -the following warning: - - WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]() - invalid hw_rix: 1a - [..] - Call Trace: - [<802656a8>] show_stack+0x48/0x70 - [<802dd92c>] warn_slowpath_common+0x88/0xbc - [<802dd98c>] warn_slowpath_fmt+0x2c/0x38 - [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k] - [<8028ac64>] tasklet_action+0x8c/0xf0 - [<80075804>] __do_softirq+0x180/0x32c - [<80196ce8>] irq_exit+0x54/0x70 - [<80041848>] ret_from_irq+0x0/0x4 - [<80182fdc>] ioread32+0x4/0xc - [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k] - [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k] - [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k] - [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k] - [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211] - [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211] - [<8022c3f4>] process_one_work+0x28c/0x400 - [<802df8f8>] worker_thread+0x258/0x3c0 - [<801b5710>] kthread+0xe0/0xec - [<800418a8>] ret_from_kernel_thread+0x14/0x1c - -Fix this issue by adding a new status flag, which forbids to re-enable -the interrupt generation until the HW configuration is completed. - -Note: previous patch, which reorders the Rx disable code helps to avoid -the above warning, but not fixes the root cause of unexpected frame -receiving. - -CC: Jiri Slaby <jirislaby@gmail.com> -CC: Nick Kossifidis <mickflemm@gmail.com> -CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> -Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com> -Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com> -Tested-by: Eric Bree <ebree@nltinc.com> -Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> ---- - ---- a/drivers/net/wireless/ath/ath5k/ath5k.h -+++ b/drivers/net/wireless/ath/ath5k/ath5k.h -@@ -1283,6 +1283,7 @@ struct ath5k_hw { - #define ATH_STAT_PROMISC 1 - #define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ - #define ATH_STAT_STARTED 3 /* opened & irqs enabled */ -+#define ATH_STAT_RESET 4 /* hw reset */ - - unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ - unsigned int fif_filter_flags; /* Current FIF_* filter flags */ ---- a/drivers/net/wireless/ath/ath5k/base.c -+++ b/drivers/net/wireless/ath/ath5k/base.c -@@ -1523,6 +1523,9 @@ ath5k_set_current_imask(struct ath5k_hw - enum ath5k_int imask; - unsigned long flags; - -+ if (test_bit(ATH_STAT_RESET, ah->status)) -+ return; -+ - spin_lock_irqsave(&ah->irqlock, flags); - imask = ah->imask; - if (ah->rx_pending) -@@ -2862,6 +2865,8 @@ ath5k_reset(struct ath5k_hw *ah, struct - - ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n"); - -+ __set_bit(ATH_STAT_RESET, ah->status); -+ - ath5k_hw_set_imr(ah, 0); - synchronize_irq(ah->irq); - ath5k_stop_tasklets(ah); -@@ -2952,6 +2957,8 @@ ath5k_reset(struct ath5k_hw *ah, struct - */ - /* ath5k_chan_change(ah, c); */ - -+ __clear_bit(ATH_STAT_RESET, ah->status); -+ - ath5k_beacon_config(ah); - /* intrs are enabled by ath5k_beacon_config */ - diff --git a/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch b/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch new file mode 100644 index 0000000000..cf8194aa33 --- /dev/null +++ b/package/kernel/mac80211/patches/306-ath9k-do-not-reset-while-BB-panic-0x4000409-on-ar956.patch @@ -0,0 +1,31 @@ +From: Miaoqing Pan <miaoqing@codeaurora.org> +Date: Fri, 15 Jan 2016 18:17:19 +0800 +Subject: [PATCH] ath9k: do not reset while BB panic(0x4000409) on ar9561 + +BB panic(0x4000409) observed while AP enabling/disabling +bursting. + +Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c ++++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c +@@ -2071,7 +2071,8 @@ void ar9003_hw_attach_phy_ops(struct ath + * to be disabled. + * + * 0x04000409: Packet stuck on receive. +- * Full chip reset is required for all chips except AR9340. ++ * Full chip reset is required for all chips except ++ * AR9340, AR9531 and AR9561. + */ + + /* +@@ -2100,7 +2101,7 @@ bool ar9003_hw_bb_watchdog_check(struct + case 0x04000b09: + return true; + case 0x04000409: +- if (AR_SREV_9340(ah) || AR_SREV_9531(ah)) ++ if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9561(ah)) + return false; + else + return true; diff --git a/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch b/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch new file mode 100644 index 0000000000..80b781ca54 --- /dev/null +++ b/package/kernel/mac80211/patches/307-ath9k-fix-inconsistent-use-of-tab-and-space-in-inden.patch @@ -0,0 +1,27 @@ +From: Miaoqing Pan <miaoqing@codeaurora.org> +Date: Fri, 15 Jan 2016 18:17:20 +0800 +Subject: [PATCH] ath9k: fix inconsistent use of tab and space in + indentation + +Minor changes for indenting. + +Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c ++++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +@@ -5485,11 +5485,11 @@ unsigned int ar9003_get_paprd_scale_fact + AR9300_PAPRD_SCALE_1); + else { + if (chan->channel >= 5700) +- return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20), +- AR9300_PAPRD_SCALE_1); ++ return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20), ++ AR9300_PAPRD_SCALE_1); + else if (chan->channel >= 5400) + return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40), +- AR9300_PAPRD_SCALE_2); ++ AR9300_PAPRD_SCALE_2); + else + return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40), + AR9300_PAPRD_SCALE_1); diff --git a/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch b/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch deleted file mode 100644 index ab9771e64a..0000000000 --- a/package/kernel/mac80211/patches/307-ath9k-fix-tracking-of-enabled-AP-beacons.patch +++ /dev/null @@ -1,76 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Thu, 12 Mar 2015 17:10:50 +0100 -Subject: [PATCH] ath9k: fix tracking of enabled AP beacons - -sc->nbcnvifs tracks assigned beacon slots, not enabled beacons. -Therefore, it cannot be used to decide if cur_conf->enable_beacon (bool) -should be updated, or if beacons have been enabled already. -With the current code (depending on the order of calls), beacons often -do not get enabled in an AP+STA setup. -To fix tracking of enabled beacons, convert cur_conf->enable_beacon to a -bitmask of enabled beacon slots. - -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/beacon.c -+++ b/drivers/net/wireless/ath/ath9k/beacon.c -@@ -219,12 +219,15 @@ void ath9k_beacon_remove_slot(struct ath - struct ath_common *common = ath9k_hw_common(sc->sc_ah); - struct ath_vif *avp = (void *)vif->drv_priv; - struct ath_buf *bf = avp->av_bcbuf; -+ struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon; - - ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n", - avp->av_bslot); - - tasklet_disable(&sc->bcon_tasklet); - -+ cur_conf->enable_beacon &= ~BIT(avp->av_bslot); -+ - if (bf && bf->bf_mpdu) { - struct sk_buff *skb = bf->bf_mpdu; - dma_unmap_single(sc->dev, bf->bf_buf_addr, -@@ -521,8 +524,7 @@ static bool ath9k_allow_beacon_config(st - } - - if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) { -- if ((vif->type != NL80211_IFTYPE_AP) || -- (sc->nbcnvifs > 1)) { -+ if (vif->type != NL80211_IFTYPE_AP) { - ath_dbg(common, CONFIG, - "An AP interface is already present !\n"); - return false; -@@ -616,12 +618,14 @@ void ath9k_beacon_config(struct ath_soft - * enabling/disabling SWBA. - */ - if (changed & BSS_CHANGED_BEACON_ENABLED) { -- if (!bss_conf->enable_beacon && -- (sc->nbcnvifs <= 1)) { -- cur_conf->enable_beacon = false; -- } else if (bss_conf->enable_beacon) { -- cur_conf->enable_beacon = true; -- ath9k_cache_beacon_config(sc, ctx, bss_conf); -+ bool enabled = cur_conf->enable_beacon; -+ -+ if (!bss_conf->enable_beacon) { -+ cur_conf->enable_beacon &= ~BIT(avp->av_bslot); -+ } else { -+ cur_conf->enable_beacon |= BIT(avp->av_bslot); -+ if (!enabled) -+ ath9k_cache_beacon_config(sc, ctx, bss_conf); - } - } - ---- a/drivers/net/wireless/ath/ath9k/common.h -+++ b/drivers/net/wireless/ath/ath9k/common.h -@@ -54,7 +54,7 @@ struct ath_beacon_config { - u16 dtim_period; - u16 bmiss_timeout; - u8 dtim_count; -- bool enable_beacon; -+ u8 enable_beacon; - bool ibss_creator; - u32 nexttbtt; - u32 intval; diff --git a/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch b/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch new file mode 100644 index 0000000000..d4088664bf --- /dev/null +++ b/package/kernel/mac80211/patches/308-ath9k-fix-data-bus-error-on-ar9300-and-ar9580.patch @@ -0,0 +1,65 @@ +From: Miaoqing Pan <miaoqing@codeaurora.org> +Date: Fri, 15 Jan 2016 18:17:21 +0800 +Subject: [PATCH] ath9k: fix data bus error on ar9300 and ar9580 + +One crash issue be found on ar9300: RTC_RC reg read leads crash, leading +the data bus error, due to RTC_RC reg write not happen properly. + +Warm Reset trigger in continuous beacon stuck for one of the customer for +other chip, noticed the MAC was stuck in RTC reset. After analysis noticed +DMA did not complete when RTC was put in reset. + +So, before resetting the MAC need to make sure there are no pending DMA +transactions because this reset does not reset all parts of the chip. + +The 12th and 11th bit of MAC _DMA_CFG register used to do that. + 12 cfg_halt_ack 0x0 + 0 DMA has not yet halted + 1 DMA has halted + 11 cfg_halt_req 0x0 + 0 DMA logic operates normally + 1 Request DMA logic to stop so software can reset the MAC + +The Bit [12] of this register indicates when the halt has taken effect or +not. the DMA halt IS NOT recoverable; once software sets bit [11] to +request a DMA halt, software must wait for bit [12] to be set and reset +the MAC. + +So, the same thing we implemented for ar9580 chip. + +Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/hw.c ++++ b/drivers/net/wireless/ath/ath9k/hw.c +@@ -1368,6 +1368,16 @@ static bool ath9k_hw_set_reset(struct at + if (ath9k_hw_mci_is_enabled(ah)) + ar9003_mci_check_gpm_offset(ah); + ++ /* DMA HALT added to resolve ar9300 and ar9580 bus error during ++ * RTC_RC reg read ++ */ ++ if (AR_SREV_9300(ah) || AR_SREV_9580(ah)) { ++ REG_SET_BIT(ah, AR_CFG, AR_CFG_HALT_REQ); ++ ath9k_hw_wait(ah, AR_CFG, AR_CFG_HALT_ACK, AR_CFG_HALT_ACK, ++ 20 * AH_WAIT_TIMEOUT); ++ REG_CLR_BIT(ah, AR_CFG, AR_CFG_HALT_REQ); ++ } ++ + REG_WRITE(ah, AR_RTC_RC, rst_flags); + + REGWRITE_BUFFER_FLUSH(ah); +--- a/drivers/net/wireless/ath/ath9k/reg.h ++++ b/drivers/net/wireless/ath/ath9k/reg.h +@@ -34,8 +34,10 @@ + #define AR_CFG_SWRG 0x00000010 + #define AR_CFG_AP_ADHOC_INDICATION 0x00000020 + #define AR_CFG_PHOK 0x00000100 +-#define AR_CFG_CLK_GATE_DIS 0x00000400 + #define AR_CFG_EEBS 0x00000200 ++#define AR_CFG_CLK_GATE_DIS 0x00000400 ++#define AR_CFG_HALT_REQ 0x00000800 ++#define AR_CFG_HALT_ACK 0x00001000 + #define AR_CFG_PCI_MASTER_REQ_Q_THRESH 0x00060000 + #define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S 17 + diff --git a/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch b/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch deleted file mode 100644 index d13263655e..0000000000 --- a/package/kernel/mac80211/patches/308-mac80211-minstrel_ht-fix-rounding-issue-in-MCS-durat.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Fri, 13 Mar 2015 10:49:40 +0100 -Subject: [PATCH] mac80211: minstrel_ht: fix rounding issue in MCS duration - calculation - -On very high MCS bitrates, the calculated duration of rates that are -next to each other can be very imprecise, due to the small packet size -used as reference (1200 bytes). -This is most visible in VHT80 nss=2 MCS8/9, for which minstrel shows the -same throughput when the probability is also the same. This leads to a -bad rate selection for such rates. - -Fix this issue by introducing an average A-MPDU size factor into the -calculation. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/net/mac80211/rc80211_minstrel_ht.c -+++ b/net/mac80211/rc80211_minstrel_ht.c -@@ -17,10 +17,11 @@ - #include "rc80211_minstrel.h" - #include "rc80211_minstrel_ht.h" - -+#define AVG_AMPDU_SIZE 16 - #define AVG_PKT_SIZE 1200 - - /* Number of bits for an average sized packet */ --#define MCS_NBITS (AVG_PKT_SIZE << 3) -+#define MCS_NBITS ((AVG_PKT_SIZE * AVG_AMPDU_SIZE) << 3) - - /* Number of symbols for a packet with (bps) bits per symbol */ - #define MCS_NSYMS(bps) DIV_ROUND_UP(MCS_NBITS, (bps)) -@@ -33,7 +34,8 @@ - ) - - /* Transmit duration for the raw data part of an average sized packet */ --#define MCS_DURATION(streams, sgi, bps) MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps))) -+#define MCS_DURATION(streams, sgi, bps) \ -+ (MCS_SYMBOL_TIME(sgi, MCS_NSYMS((streams) * (bps))) / AVG_AMPDU_SIZE) - - #define BW_20 0 - #define BW_40 1 diff --git a/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch b/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch new file mode 100644 index 0000000000..d9511c8d5f --- /dev/null +++ b/package/kernel/mac80211/patches/309-01-brcmfmac-add-missing-include.patch @@ -0,0 +1,19 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Fri, 15 Jan 2016 15:59:45 +0100 +Subject: [PATCH] brcmfmac: add missing include + +linux/module.h is required for defining module parameters + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +@@ -17,6 +17,7 @@ + #include <linux/kernel.h> + #include <linux/string.h> + #include <linux/netdevice.h> ++#include <linux/module.h> + #include <brcmu_wifi.h> + #include <brcmu_utils.h> + #include "core.h" diff --git a/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch b/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch new file mode 100644 index 0000000000..711e019e2b --- /dev/null +++ b/package/kernel/mac80211/patches/309-02-brcmfmac-fix-sdio-sg-table-alloc-crash.patch @@ -0,0 +1,118 @@ +From: Hante Meuleman <meuleman@broadcom.com> +Date: Tue, 19 Jan 2016 12:39:24 +0100 +Subject: [PATCH] brcmfmac: fix sdio sg table alloc crash + +With commit 7d34b0560567 ("brcmfmac: Move all module parameters to +one place") a bug was introduced causing a null pointer exception. +This patch fixes the bug by initializing the sg table till after +the settings have been initialized. + +Fixes: 7d34b0560567 ("brcmfmac: Move all module parameters to one place") +Reported-by: Marc Zyngier <marc.zyngier@arm.com> +Tested-by: Marc Zyngier <marc.zyngier@arm.com> +Reviewed-by: Arend Van Spriel <arend@broadcom.com> +Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> +Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> +Signed-off-by: Hante Meuleman <meuleman@broadcom.com> +Signed-off-by: Arend van Spriel <arend@broadcom.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -879,11 +879,24 @@ int brcmf_sdiod_abort(struct brcmf_sdio_ + return 0; + } + +-static void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev) ++void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev) + { ++ struct sdio_func *func; ++ struct mmc_host *host; ++ uint max_blocks; + uint nents; + int err; + ++ func = sdiodev->func[2]; ++ host = func->card->host; ++ sdiodev->sg_support = host->max_segs > 1; ++ max_blocks = min_t(uint, host->max_blk_count, 511u); ++ sdiodev->max_request_size = min_t(uint, host->max_req_size, ++ max_blocks * func->cur_blksize); ++ sdiodev->max_segment_count = min_t(uint, host->max_segs, ++ SG_MAX_SINGLE_ALLOC); ++ sdiodev->max_segment_size = host->max_seg_size; ++ + if (!sdiodev->sg_support) + return; + +@@ -1021,9 +1034,6 @@ static void brcmf_sdiod_host_fixup(struc + + static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) + { +- struct sdio_func *func; +- struct mmc_host *host; +- uint max_blocks; + int ret = 0; + + sdiodev->num_funcs = 2; +@@ -1054,26 +1064,6 @@ static int brcmf_sdiod_probe(struct brcm + goto out; + } + +- /* +- * determine host related variables after brcmf_sdiod_probe() +- * as func->cur_blksize is properly set and F2 init has been +- * completed successfully. +- */ +- func = sdiodev->func[2]; +- host = func->card->host; +- sdiodev->sg_support = host->max_segs > 1; +- max_blocks = min_t(uint, host->max_blk_count, 511u); +- sdiodev->max_request_size = min_t(uint, host->max_req_size, +- max_blocks * func->cur_blksize); +- sdiodev->max_segment_count = min_t(uint, host->max_segs, +- SG_MAX_SINGLE_ALLOC); +- sdiodev->max_segment_size = host->max_seg_size; +- +- /* allocate scatter-gather table. sg support +- * will be disabled upon allocation failure. +- */ +- brcmf_sdiod_sgtable_alloc(sdiodev); +- + ret = brcmf_sdiod_freezer_attach(sdiodev); + if (ret) + goto out; +@@ -1084,7 +1074,7 @@ static int brcmf_sdiod_probe(struct brcm + ret = -ENODEV; + goto out; + } +- brcmf_sdiod_host_fixup(host); ++ brcmf_sdiod_host_fixup(sdiodev->func[2]->card->host); + out: + if (ret) + brcmf_sdiod_remove(sdiodev); +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -4114,6 +4114,11 @@ struct brcmf_sdio *brcmf_sdio_probe(stru + goto fail; + } + ++ /* allocate scatter-gather table. sg support ++ * will be disabled upon allocation failure. ++ */ ++ brcmf_sdiod_sgtable_alloc(bus->sdiodev); ++ + /* Query the F2 block size, set roundup accordingly */ + bus->blocksize = bus->sdiodev->func[2]->cur_blksize; + bus->roundup = min(max_roundup, bus->blocksize); +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h +@@ -342,6 +342,7 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_ + + /* Issue an abort to the specified function */ + int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn); ++void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev); + void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev, + enum brcmf_sdiod_state state); + #ifdef CONFIG_PM_SLEEP diff --git a/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch b/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch deleted file mode 100644 index 945fbce334..0000000000 --- a/package/kernel/mac80211/patches/309-ath9k-disable-TPC-support-again-for-now.patch +++ /dev/null @@ -1,22 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Sun, 15 Mar 2015 08:02:37 +0100 -Subject: [PATCH] ath9k: disable TPC support again (for now) - -TPC support has been observed to cause some tx power fluctuations on -some devices with at least AR934x and AR938x chips. -Disable it for now until the bugs have been found and fixed - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -424,7 +424,7 @@ static void ath9k_hw_init_defaults(struc - ah->power_mode = ATH9K_PM_UNDEFINED; - ah->htc_reset_init = true; - -- ah->tpc_enabled = true; -+ ah->tpc_enabled = false; - - ah->ani_function = ATH9K_ANI_ALL; - if (!AR_SREV_9300_20_OR_LATER(ah)) diff --git a/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch b/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch new file mode 100644 index 0000000000..287d6e13bd --- /dev/null +++ b/package/kernel/mac80211/patches/310-ath9k_hw-ignore-eeprom-magic-mismatch-on-flash-based.patch @@ -0,0 +1,38 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Thu, 21 Jan 2016 16:28:44 +0100 +Subject: [PATCH] ath9k_hw: ignore eeprom magic mismatch on flash based devices + +Many AR913x based devices (maybe others too) do not have a valid EEPROM +magic in their calibration data partition. + +Fixes: 6fa658fd5ab2 ("ath9k: Simplify and fix eeprom endianness swapping") +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/eeprom.c ++++ b/drivers/net/wireless/ath/ath9k/eeprom.c +@@ -150,18 +150,18 @@ int ath9k_hw_nvram_swap_data(struct ath_ + return -EIO; + } + +- if (magic == AR5416_EEPROM_MAGIC) { +- *swap_needed = false; +- } else if (swab16(magic) == AR5416_EEPROM_MAGIC) { ++ *swap_needed = false; ++ if (swab16(magic) == AR5416_EEPROM_MAGIC) { + if (ah->ah_flags & AH_NO_EEP_SWAP) { + ath_info(common, + "Ignoring endianness difference in EEPROM magic bytes.\n"); +- +- *swap_needed = false; + } else { + *swap_needed = true; + } +- } else { ++ } else if (magic != AR5416_EEPROM_MAGIC) { ++ if (ath9k_hw_use_flash(ah)) ++ return 0; ++ + ath_err(common, + "Invalid EEPROM Magic (0x%04x).\n", magic); + return -EINVAL; diff --git a/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch b/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch deleted file mode 100644 index bd3050e3c2..0000000000 --- a/package/kernel/mac80211/patches/310-mac80211-don-t-look-up-stations-for-multicast-addres.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Johannes Berg <johannes.berg@intel.com> -Date: Tue, 24 Feb 2015 00:28:18 +0100 -Subject: [PATCH] mac80211: don't look up stations for multicast addresses - -Since multicast addresses don't exist as stations, don't attempt -to look them up in the hashtable on TX. - -Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1161,7 +1161,7 @@ ieee80211_tx_prepare(struct ieee80211_su - tx->sdata->control_port_protocol == tx->skb->protocol) { - tx->sta = sta_info_get_bss(sdata, hdr->addr1); - } -- if (!tx->sta) -+ if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) - tx->sta = sta_info_get(sdata, hdr->addr1); - - if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) && diff --git a/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch b/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch new file mode 100644 index 0000000000..070efa98e8 --- /dev/null +++ b/package/kernel/mac80211/patches/311-ath9k-do-not-limit-the-number-of-DFS-interfaces-to-1.patch @@ -0,0 +1,55 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Fri, 22 Jan 2016 01:05:56 +0100 +Subject: [PATCH] ath9k: do not limit the number of DFS interfaces to 1 + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/init.c ++++ b/drivers/net/wireless/ath/ath9k/init.c +@@ -751,14 +751,6 @@ static const struct ieee80211_iface_comb + + #endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */ + +-static const struct ieee80211_iface_limit if_dfs_limits[] = { +- { .max = 1, .types = BIT(NL80211_IFTYPE_AP) | +-#ifdef CPTCFG_MAC80211_MESH +- BIT(NL80211_IFTYPE_MESH_POINT) | +-#endif +- BIT(NL80211_IFTYPE_ADHOC) }, +-}; +- + static const struct ieee80211_iface_combination if_comb[] = { + { + .limits = if_limits, +@@ -766,6 +758,11 @@ static const struct ieee80211_iface_comb + .max_interfaces = 2048, + .num_different_channels = 1, + .beacon_int_infra_match = true, ++#ifdef CPTCFG_ATH9K_DFS_CERTIFIED ++ .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | ++ BIT(NL80211_CHAN_WIDTH_20) | ++ BIT(NL80211_CHAN_WIDTH_40), ++#endif + }, + { + .limits = wds_limits, +@@ -774,18 +771,6 @@ static const struct ieee80211_iface_comb + .num_different_channels = 1, + .beacon_int_infra_match = true, + }, +-#ifdef CPTCFG_ATH9K_DFS_CERTIFIED +- { +- .limits = if_dfs_limits, +- .n_limits = ARRAY_SIZE(if_dfs_limits), +- .max_interfaces = 1, +- .num_different_channels = 1, +- .beacon_int_infra_match = true, +- .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | +- BIT(NL80211_CHAN_WIDTH_20) | +- BIT(NL80211_CHAN_WIDTH_40), +- } +-#endif + }; + + #ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT diff --git a/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch b/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch deleted file mode 100644 index b2475b9106..0000000000 --- a/package/kernel/mac80211/patches/311-mac80211-remove-drop_unencrypted-code.patch +++ /dev/null @@ -1,130 +0,0 @@ -From: Johannes Berg <johannes.berg@intel.com> -Date: Fri, 20 Mar 2015 11:41:58 +0100 -Subject: [PATCH] mac80211: remove drop_unencrypted code - -This mechanism was historic, and only ever used by IBSS, which -also doesn't need to have it as it properly manages station's -802.1X PAE state (or, with WEP, always has a key.) - -Remove the mechanism to clean up the code. - -Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- - ---- a/net/mac80211/debugfs.c -+++ b/net/mac80211/debugfs.c -@@ -274,8 +274,6 @@ void debugfs_hw_add(struct ieee80211_loc - #ifdef CPTCFG_MAC80211_DEBUG_COUNTERS - DEBUGFS_STATS_ADD(tx_handlers_drop, local->tx_handlers_drop); - DEBUGFS_STATS_ADD(tx_handlers_queued, local->tx_handlers_queued); -- DEBUGFS_STATS_ADD(tx_handlers_drop_unencrypted, -- local->tx_handlers_drop_unencrypted); - DEBUGFS_STATS_ADD(tx_handlers_drop_fragment, - local->tx_handlers_drop_fragment); - DEBUGFS_STATS_ADD(tx_handlers_drop_wep, ---- a/net/mac80211/debugfs_netdev.c -+++ b/net/mac80211/debugfs_netdev.c -@@ -177,7 +177,6 @@ static ssize_t ieee80211_if_write_##name - IEEE80211_IF_FILE_R(name) - - /* common attributes */ --IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC); - IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ], - HEX); - IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ], -@@ -562,7 +561,6 @@ IEEE80211_IF_FILE(dot11MeshAwakeWindowDu - - static void add_common_files(struct ieee80211_sub_if_data *sdata) - { -- DEBUGFS_ADD(drop_unencrypted); - DEBUGFS_ADD(rc_rateidx_mask_2ghz); - DEBUGFS_ADD(rc_rateidx_mask_5ghz); - DEBUGFS_ADD(rc_rateidx_mcs_mask_2ghz); ---- a/net/mac80211/ibss.c -+++ b/net/mac80211/ibss.c -@@ -249,8 +249,6 @@ static void __ieee80211_sta_join_ibss(st - if (presp) - kfree_rcu(presp, rcu_head); - -- sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; -- - /* make a copy of the chandef, it could be modified below. */ - chandef = *req_chandef; - chan = chandef.chan; -@@ -1289,8 +1287,6 @@ static void ieee80211_sta_create_ibss(st - - if (ifibss->privacy) - capability |= WLAN_CAPABILITY_PRIVACY; -- else -- sdata->drop_unencrypted = 0; - - __ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int, - &ifibss->chandef, ifibss->basic_rates, ---- a/net/mac80211/ieee80211_i.h -+++ b/net/mac80211/ieee80211_i.h -@@ -842,8 +842,6 @@ struct ieee80211_sub_if_data { - - unsigned long state; - -- int drop_unencrypted; -- - char name[IFNAMSIZ]; - - /* Fragment table for host-based reassembly */ -@@ -1289,7 +1287,6 @@ struct ieee80211_local { - /* TX/RX handler statistics */ - unsigned int tx_handlers_drop; - unsigned int tx_handlers_queued; -- unsigned int tx_handlers_drop_unencrypted; - unsigned int tx_handlers_drop_fragment; - unsigned int tx_handlers_drop_wep; - unsigned int tx_handlers_drop_not_assoc; ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -1535,7 +1535,6 @@ int ieee80211_if_change_type(struct ieee - } - - /* reset some values that shouldn't be kept across type changes */ -- sdata->drop_unencrypted = 0; - if (type == NL80211_IFTYPE_STATION) - sdata->u.mgd.use_4addr = false; - ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -1897,8 +1897,7 @@ static int ieee80211_drop_unencrypted(st - /* Drop unencrypted frames if key is set. */ - if (unlikely(!ieee80211_has_protected(fc) && - !ieee80211_is_nullfunc(fc) && -- ieee80211_is_data(fc) && -- (rx->key || rx->sdata->drop_unencrypted))) -+ ieee80211_is_data(fc) && rx->key)) - return -EACCES; - - return 0; ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -594,23 +594,8 @@ ieee80211_tx_h_select_key(struct ieee802 - else if (!is_multicast_ether_addr(hdr->addr1) && - (key = rcu_dereference(tx->sdata->default_unicast_key))) - tx->key = key; -- else if (info->flags & IEEE80211_TX_CTL_INJECTED) -+ else - tx->key = NULL; -- else if (!tx->sdata->drop_unencrypted) -- tx->key = NULL; -- else if (tx->skb->protocol == tx->sdata->control_port_protocol) -- tx->key = NULL; -- else if (ieee80211_is_robust_mgmt_frame(tx->skb) && -- !(ieee80211_is_action(hdr->frame_control) && -- tx->sta && test_sta_flag(tx->sta, WLAN_STA_MFP))) -- tx->key = NULL; -- else if (ieee80211_is_mgmt(hdr->frame_control) && -- !ieee80211_is_robust_mgmt_frame(tx->skb)) -- tx->key = NULL; -- else { -- I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); -- return TX_DROP; -- } - - if (tx->key) { - bool skip_hw = false; diff --git a/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch b/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch deleted file mode 100644 index 02a7fab436..0000000000 --- a/package/kernel/mac80211/patches/312-mac80211-don-t-look-up-destination-station-twice.patch +++ /dev/null @@ -1,71 +0,0 @@ -From: Johannes Berg <johannes.berg@intel.com> -Date: Fri, 20 Mar 2015 16:24:21 +0100 -Subject: [PATCH] mac80211: don't look up destination station twice - -There's no need to look up the destination station twice while -building the 802.11 header for a given frame if the frame will -actually be transmitted to the station we initially looked up. - -This happens for 4-addr VLAN interfaces and TDLS connections, which -both directly send the frame to the station they looked up, though -in the case of TDLS some station conditions need to be checked. - -To avoid that, add a variable indicating that we've looked up the -station that the frame is going to be transmitted to, and avoid the -lookup/flag checking if it already has been done. - -In the TDLS case, also move the authorized/wme_sta flag assignment -to the correct place, i.e. only when that station is really used. -Before this change, the new lookup should always have succeeded so -that the potentially erroneous data would be overwritten. - -Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1894,6 +1894,7 @@ static struct sk_buff *ieee80211_build_h - bool wme_sta = false, authorized = false, tdls_auth = false; - bool tdls_peer = false, tdls_setup_frame = false; - bool multicast; -+ bool have_station = false; - u16 info_id = 0; - struct ieee80211_chanctx_conf *chanctx_conf; - struct ieee80211_sub_if_data *ap_sdata; -@@ -1918,6 +1919,7 @@ static struct sk_buff *ieee80211_build_h - hdrlen = 30; - authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); - wme_sta = sta->sta.wme; -+ have_station = true; - } - ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, - u.ap); -@@ -2034,9 +2036,6 @@ static struct sk_buff *ieee80211_build_h - if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) { - sta = sta_info_get(sdata, skb->data); - if (sta) { -- authorized = test_sta_flag(sta, -- WLAN_STA_AUTHORIZED); -- wme_sta = sta->sta.wme; - tdls_peer = test_sta_flag(sta, - WLAN_STA_TDLS_PEER); - tdls_auth = test_sta_flag(sta, -@@ -2068,6 +2067,9 @@ static struct sk_buff *ieee80211_build_h - memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); - memcpy(hdr.addr3, sdata->u.mgd.bssid, ETH_ALEN); - hdrlen = 24; -+ have_station = true; -+ authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); -+ wme_sta = sta->sta.wme; - } else if (sdata->u.mgd.use_4addr && - cpu_to_be16(ethertype) != sdata->control_port_protocol) { - fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | -@@ -2130,7 +2132,7 @@ static struct sk_buff *ieee80211_build_h - * in AP mode) - */ - multicast = is_multicast_ether_addr(hdr.addr1); -- if (!multicast) { -+ if (!multicast && !have_station) { - sta = sta_info_get(sdata, hdr.addr1); - if (sta) { - authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); diff --git a/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch b/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch new file mode 100644 index 0000000000..61cafc7625 --- /dev/null +++ b/package/kernel/mac80211/patches/312-mac80211-fix-txq-queue-related-crashes.patch @@ -0,0 +1,27 @@ +From: Michal Kazior <michal.kazior@tieto.com> +Date: Thu, 21 Jan 2016 14:23:07 +0100 +Subject: [PATCH] mac80211: fix txq queue related crashes + +The driver can access the queue simultanously +while mac80211 tears down the interface. Without +spinlock protection this could lead to corrupting +sk_buff_head and subsequently to an invalid +pointer dereference. + +Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") +Signed-off-by: Michal Kazior <michal.kazior@tieto.com> +--- + +--- a/net/mac80211/iface.c ++++ b/net/mac80211/iface.c +@@ -977,7 +977,10 @@ static void ieee80211_do_stop(struct iee + if (sdata->vif.txq) { + struct txq_info *txqi = to_txq_info(sdata->vif.txq); + ++ spin_lock_bh(&txqi->queue.lock); + ieee80211_purge_tx_queue(&local->hw, &txqi->queue); ++ spin_unlock_bh(&txqi->queue.lock); ++ + atomic_set(&sdata->txqs_len[txqi->txq.ac], 0); + } + diff --git a/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch b/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch deleted file mode 100644 index 41253519b3..0000000000 --- a/package/kernel/mac80211/patches/313-mac80211-drop-4-addr-VLAN-frames-earlier-if-not-conn.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Johannes Berg <johannes.berg@intel.com> -Date: Fri, 20 Mar 2015 16:24:22 +0100 -Subject: [PATCH] mac80211: drop 4-addr VLAN frames earlier if not - connected - -If there's no station on the 4-addr VLAN interface, then frames -cannot be transmitted. Drop such frames earlier, before setting -up all the information for them. - -We should keep the old check though since that code might be used -for other internally-generated frames. - -Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1920,6 +1920,9 @@ static struct sk_buff *ieee80211_build_h - authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); - wme_sta = sta->sta.wme; - have_station = true; -+ } else if (sdata->wdev.use_4addr) { -+ ret = -ENOLINK; -+ goto free; - } - ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, - u.ap); diff --git a/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch b/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch new file mode 100644 index 0000000000..844d43bfc7 --- /dev/null +++ b/package/kernel/mac80211/patches/313-mac80211-fix-unnecessary-frame-drops-in-mesh-fwding.patch @@ -0,0 +1,57 @@ +From: Michal Kazior <michal.kazior@tieto.com> +Date: Mon, 25 Jan 2016 14:43:24 +0100 +Subject: [PATCH] mac80211: fix unnecessary frame drops in mesh fwding + +The ieee80211_queue_stopped() expects hw queue +number but it was given raw WMM AC number instead. + +This could cause frame drops and problems with +traffic in some cases - most notably if driver +doesn't map AC numbers to queue numbers 1:1 and +uses ieee80211_stop_queues() and +ieee80211_wake_queue() only without ever calling +ieee80211_wake_queues(). + +On ath10k it was possible to hit this problem in +the following case: + + 1. wlan0 uses queue 0 + (ath10k maps queues per vif) + 2. offchannel uses queue 15 + 3. queues 1-14 are unused + 4. ieee80211_stop_queues() + 5. ieee80211_wake_queue(q=0) + 6. ieee80211_wake_queue(q=15) + (other queues are not woken up because both + driver and mac80211 know other queues are + unused) + 7. ieee80211_rx_h_mesh_fwding() + 8. ieee80211_select_queue_80211() returns 2 + 9. ieee80211_queue_stopped(q=2) returns true + 10. frame is dropped (oops!) + +Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping") +Signed-off-by: Michal Kazior <michal.kazior@tieto.com> +--- + +--- a/net/mac80211/rx.c ++++ b/net/mac80211/rx.c +@@ -2235,7 +2235,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80 + struct ieee80211_local *local = rx->local; + struct ieee80211_sub_if_data *sdata = rx->sdata; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; +- u16 q, hdrlen; ++ u16 ac, q, hdrlen; + + hdr = (struct ieee80211_hdr *) skb->data; + hdrlen = ieee80211_hdrlen(hdr->frame_control); +@@ -2304,7 +2304,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80 + ether_addr_equal(sdata->vif.addr, hdr->addr3)) + return RX_CONTINUE; + +- q = ieee80211_select_queue_80211(sdata, skb, hdr); ++ ac = ieee80211_select_queue_80211(sdata, skb, hdr); ++ q = sdata->vif.hw_queue[ac]; + if (ieee80211_queue_stopped(&local->hw, q)) { + IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion); + return RX_DROP_MONITOR; diff --git a/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch b/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch new file mode 100644 index 0000000000..5b3efbdc5a --- /dev/null +++ b/package/kernel/mac80211/patches/314-mac80211-Requeue-work-after-scan-complete-for-all-VI.patch @@ -0,0 +1,103 @@ +From: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> +Date: Tue, 12 Jan 2016 14:30:19 +0530 +Subject: [PATCH] mac80211: Requeue work after scan complete for all VIF + types. + +During a sw scan ieee80211_iface_work ignores work items for all vifs. +However after the scan complete work is requeued only for STA, ADHOC +and MESH iftypes. + +This occasionally results in event processing getting delayed/not +processed for iftype AP when it coexists with a STA. This can result +in data halt and eventually disconnection on the AP interface. + +Signed-off-by: Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> +Cc: linux-wireless@vger.kernel.org +Cc: johannes@sipsolutions.net +--- + +--- a/net/mac80211/ibss.c ++++ b/net/mac80211/ibss.c +@@ -1731,7 +1731,6 @@ void ieee80211_ibss_notify_scan_complete + if (sdata->vif.type != NL80211_IFTYPE_ADHOC) + continue; + sdata->u.ibss.last_scan_completed = jiffies; +- ieee80211_queue_work(&local->hw, &sdata->work); + } + mutex_unlock(&local->iflist_mtx); + } +--- a/net/mac80211/mesh.c ++++ b/net/mac80211/mesh.c +@@ -1369,17 +1369,6 @@ out: + sdata_unlock(sdata); + } + +-void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) +-{ +- struct ieee80211_sub_if_data *sdata; +- +- rcu_read_lock(); +- list_for_each_entry_rcu(sdata, &local->interfaces, list) +- if (ieee80211_vif_is_mesh(&sdata->vif) && +- ieee80211_sdata_running(sdata)) +- ieee80211_queue_work(&local->hw, &sdata->work); +- rcu_read_unlock(); +-} + + void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) + { +--- a/net/mac80211/mesh.h ++++ b/net/mac80211/mesh.h +@@ -362,14 +362,10 @@ static inline bool mesh_path_sel_is_hwmp + return sdata->u.mesh.mesh_pp_id == IEEE80211_PATH_PROTOCOL_HWMP; + } + +-void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local); +- + void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata); + void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata); + void ieee80211s_stop(void); + #else +-static inline void +-ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) {} + static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata) + { return false; } + static inline void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata) +--- a/net/mac80211/mlme.c ++++ b/net/mac80211/mlme.c +@@ -3978,8 +3978,6 @@ static void ieee80211_restart_sta_timer( + if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) + ieee80211_queue_work(&sdata->local->hw, + &sdata->u.mgd.monitor_work); +- /* and do all the other regular work too */ +- ieee80211_queue_work(&sdata->local->hw, &sdata->work); + } + } + +--- a/net/mac80211/scan.c ++++ b/net/mac80211/scan.c +@@ -314,6 +314,7 @@ static void __ieee80211_scan_completed(s + bool was_scanning = local->scanning; + struct cfg80211_scan_request *scan_req; + struct ieee80211_sub_if_data *scan_sdata; ++ struct ieee80211_sub_if_data *sdata; + + lockdep_assert_held(&local->mtx); + +@@ -373,7 +374,15 @@ static void __ieee80211_scan_completed(s + + ieee80211_mlme_notify_scan_completed(local); + ieee80211_ibss_notify_scan_completed(local); +- ieee80211_mesh_notify_scan_completed(local); ++ ++ /* Requeue all the work that might have been ignored while ++ * the scan was in progress ++ */ ++ list_for_each_entry_rcu(sdata, &local->interfaces, list) { ++ if (ieee80211_sdata_running(sdata)) ++ ieee80211_queue_work(&sdata->local->hw, &sdata->work); ++ } ++ + if (was_scanning) + ieee80211_start_next_roc(local); + } diff --git a/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch b/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch deleted file mode 100644 index 9105a64489..0000000000 --- a/package/kernel/mac80211/patches/314-mac80211-mesh-avoid-pointless-station-lookup.patch +++ /dev/null @@ -1,33 +0,0 @@ -From: Johannes Berg <johannes.berg@intel.com> -Date: Fri, 20 Mar 2015 16:24:23 +0100 -Subject: [PATCH] mac80211: mesh: avoid pointless station lookup - -In ieee80211_build_hdr(), the station is looked up to build the -header correctly (QoS field) and to check for authorization. For -mesh, authorization isn't checked here, and QoS capability is -mandatory, so the station lookup can be avoided. - -Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -2130,12 +2130,14 @@ static struct sk_buff *ieee80211_build_h - } - - /* -- * There's no need to try to look up the destination -- * if it is a multicast address (which can only happen -- * in AP mode) -+ * There's no need to try to look up the destination station -+ * if it is a multicast address. In mesh, there's no need to -+ * look up the station at all as it always must be QoS capable -+ * and mesh mode checks authorization later. - */ - multicast = is_multicast_ether_addr(hdr.addr1); -- if (!multicast && !have_station) { -+ if (!multicast && !have_station && -+ !ieee80211_vif_is_mesh(&sdata->vif)) { - sta = sta_info_get(sdata, hdr.addr1); - if (sta) { - authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); diff --git a/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch b/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch deleted file mode 100644 index d143025f0f..0000000000 --- a/package/kernel/mac80211/patches/315-mac80211-avoid-duplicate-TX-path-station-lookup.patch +++ /dev/null @@ -1,267 +0,0 @@ -From: Johannes Berg <johannes.berg@intel.com> -Date: Fri, 20 Mar 2015 14:18:27 +0100 -Subject: [PATCH] mac80211: avoid duplicate TX path station lookup - -Instead of looking up the destination station twice in the TX path -(first to build the header, and then for control processing), save -it when building the header and use it later in the TX path. - -To avoid having to look up the station in the many callers, allow -those to pass %NULL which keeps the existing lookup. - -Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- - ---- a/net/mac80211/cfg.c -+++ b/net/mac80211/cfg.c -@@ -3565,7 +3565,7 @@ static int ieee80211_probe_client(struct - nullfunc->qos_ctrl = cpu_to_le16(7); - - local_bh_disable(); -- ieee80211_xmit(sdata, skb); -+ ieee80211_xmit(sdata, sta, skb); - local_bh_enable(); - rcu_read_unlock(); - ---- a/net/mac80211/ieee80211_i.h -+++ b/net/mac80211/ieee80211_i.h -@@ -1775,7 +1775,8 @@ void mac80211_ev_michael_mic_failure(str - gfp_t gfp); - void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata, - bool bss_notify); --void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); -+void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, -+ struct sta_info *sta, struct sk_buff *skb); - - void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, int tid, ---- a/net/mac80211/sta_info.c -+++ b/net/mac80211/sta_info.c -@@ -1279,7 +1279,7 @@ static void ieee80211_send_null_response - } - - info->band = chanctx_conf->def.chan->band; -- ieee80211_xmit(sdata, skb); -+ ieee80211_xmit(sdata, sta, skb); - rcu_read_unlock(); - } - ---- a/net/mac80211/tx.c -+++ b/net/mac80211/tx.c -@@ -1110,11 +1110,13 @@ static bool ieee80211_tx_prep_agg(struct - - /* - * initialises @tx -+ * pass %NULL for the station if unknown, a valid pointer if known -+ * or an ERR_PTR() if the station is known not to exist - */ - static ieee80211_tx_result - ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, - struct ieee80211_tx_data *tx, -- struct sk_buff *skb) -+ struct sta_info *sta, struct sk_buff *skb) - { - struct ieee80211_local *local = sdata->local; - struct ieee80211_hdr *hdr; -@@ -1137,17 +1139,22 @@ ieee80211_tx_prepare(struct ieee80211_su - - hdr = (struct ieee80211_hdr *) skb->data; - -- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { -- tx->sta = rcu_dereference(sdata->u.vlan.sta); -- if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr) -- return TX_DROP; -- } else if (info->flags & (IEEE80211_TX_CTL_INJECTED | -- IEEE80211_TX_INTFL_NL80211_FRAME_TX) || -- tx->sdata->control_port_protocol == tx->skb->protocol) { -- tx->sta = sta_info_get_bss(sdata, hdr->addr1); -+ if (likely(sta)) { -+ if (!IS_ERR(sta)) -+ tx->sta = sta; -+ } else { -+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { -+ tx->sta = rcu_dereference(sdata->u.vlan.sta); -+ if (!tx->sta && sdata->wdev.use_4addr) -+ return TX_DROP; -+ } else if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX | -+ IEEE80211_TX_CTL_INJECTED) || -+ tx->sdata->control_port_protocol == tx->skb->protocol) { -+ tx->sta = sta_info_get_bss(sdata, hdr->addr1); -+ } -+ if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) -+ tx->sta = sta_info_get(sdata, hdr->addr1); - } -- if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) -- tx->sta = sta_info_get(sdata, hdr->addr1); - - if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) && - !ieee80211_is_qos_nullfunc(hdr->frame_control) && -@@ -1485,7 +1492,7 @@ bool ieee80211_tx_prepare_skb(struct iee - struct ieee80211_tx_data tx; - struct sk_buff *skb2; - -- if (ieee80211_tx_prepare(sdata, &tx, skb) == TX_DROP) -+ if (ieee80211_tx_prepare(sdata, &tx, NULL, skb) == TX_DROP) - return false; - - info->band = band; -@@ -1518,7 +1525,8 @@ EXPORT_SYMBOL(ieee80211_tx_prepare_skb); - * Returns false if the frame couldn't be transmitted but was queued instead. - */ - static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata, -- struct sk_buff *skb, bool txpending) -+ struct sta_info *sta, struct sk_buff *skb, -+ bool txpending) - { - struct ieee80211_local *local = sdata->local; - struct ieee80211_tx_data tx; -@@ -1534,7 +1542,7 @@ static bool ieee80211_tx(struct ieee8021 - - /* initialises tx */ - led_len = skb->len; -- res_prepare = ieee80211_tx_prepare(sdata, &tx, skb); -+ res_prepare = ieee80211_tx_prepare(sdata, &tx, sta, skb); - - if (unlikely(res_prepare == TX_DROP)) { - ieee80211_free_txskb(&local->hw, skb); -@@ -1590,7 +1598,8 @@ static int ieee80211_skb_resize(struct i - return 0; - } - --void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) -+void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, -+ struct sta_info *sta, struct sk_buff *skb) - { - struct ieee80211_local *local = sdata->local; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); -@@ -1625,7 +1634,7 @@ void ieee80211_xmit(struct ieee80211_sub - } - - ieee80211_set_qos_hdr(sdata, skb); -- ieee80211_tx(sdata, skb, false); -+ ieee80211_tx(sdata, sta, skb, false); - } - - static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb) -@@ -1846,7 +1855,7 @@ netdev_tx_t ieee80211_monitor_start_xmit - goto fail_rcu; - - info->band = chandef->chan->band; -- ieee80211_xmit(sdata, skb); -+ ieee80211_xmit(sdata, NULL, skb); - rcu_read_unlock(); - - return NETDEV_TX_OK; -@@ -1877,7 +1886,8 @@ fail: - * Returns: the (possibly reallocated) skb or an ERR_PTR() code - */ - static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, -- struct sk_buff *skb, u32 info_flags) -+ struct sk_buff *skb, u32 info_flags, -+ struct sta_info **sta_out) - { - struct ieee80211_local *local = sdata->local; - struct ieee80211_tx_info *info; -@@ -1920,6 +1930,7 @@ static struct sk_buff *ieee80211_build_h - authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); - wme_sta = sta->sta.wme; - have_station = true; -+ *sta_out = sta; - } else if (sdata->wdev.use_4addr) { - ret = -ENOLINK; - goto free; -@@ -2073,6 +2084,7 @@ static struct sk_buff *ieee80211_build_h - have_station = true; - authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); - wme_sta = sta->sta.wme; -+ *sta_out = sta; - } else if (sdata->u.mgd.use_4addr && - cpu_to_be16(ethertype) != sdata->control_port_protocol) { - fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | -@@ -2136,13 +2148,18 @@ static struct sk_buff *ieee80211_build_h - * and mesh mode checks authorization later. - */ - multicast = is_multicast_ether_addr(hdr.addr1); -- if (!multicast && !have_station && -- !ieee80211_vif_is_mesh(&sdata->vif)) { -- sta = sta_info_get(sdata, hdr.addr1); -+ if (multicast) { -+ *sta_out = ERR_PTR(-ENOENT); -+ } else if (!have_station && !ieee80211_vif_is_mesh(&sdata->vif)) { -+ if (sdata->control_port_protocol == skb->protocol) -+ sta = sta_info_get_bss(sdata, hdr.addr1); -+ else -+ sta = sta_info_get(sdata, hdr.addr1); - if (sta) { - authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); - wme_sta = sta->sta.wme; - } -+ *sta_out = sta ?: ERR_PTR(-ENOENT); - } - - /* For mesh, the use of the QoS header is mandatory */ -@@ -2320,6 +2337,7 @@ void __ieee80211_subif_start_xmit(struct - u32 info_flags) - { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); -+ struct sta_info *sta = NULL; - - if (unlikely(skb->len < ETH_HLEN)) { - kfree_skb(skb); -@@ -2328,7 +2346,7 @@ void __ieee80211_subif_start_xmit(struct - - rcu_read_lock(); - -- skb = ieee80211_build_hdr(sdata, skb, info_flags); -+ skb = ieee80211_build_hdr(sdata, skb, info_flags, &sta); - if (IS_ERR(skb)) - goto out; - -@@ -2336,7 +2354,7 @@ void __ieee80211_subif_start_xmit(struct - dev->stats.tx_bytes += skb->len; - dev->trans_start = jiffies; - -- ieee80211_xmit(sdata, skb); -+ ieee80211_xmit(sdata, sta, skb); - out: - rcu_read_unlock(); - } -@@ -2364,10 +2382,11 @@ ieee80211_build_data_template(struct iee - .local = sdata->local, - .sdata = sdata, - }; -+ struct sta_info *sta_ignore; - - rcu_read_lock(); - -- skb = ieee80211_build_hdr(sdata, skb, info_flags); -+ skb = ieee80211_build_hdr(sdata, skb, info_flags, &sta_ignore); - if (IS_ERR(skb)) - goto out; - -@@ -2425,7 +2444,7 @@ static bool ieee80211_tx_pending_skb(str - return true; - } - info->band = chanctx_conf->def.chan->band; -- result = ieee80211_tx(sdata, skb, true); -+ result = ieee80211_tx(sdata, NULL, skb, true); - } else { - struct sk_buff_head skbs; - -@@ -3163,7 +3182,7 @@ ieee80211_get_buffered_bc(struct ieee802 - - if (sdata->vif.type == NL80211_IFTYPE_AP) - sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); -- if (!ieee80211_tx_prepare(sdata, &tx, skb)) -+ if (!ieee80211_tx_prepare(sdata, &tx, NULL, skb)) - break; - dev_kfree_skb_any(skb); - } -@@ -3295,6 +3314,6 @@ void __ieee80211_tx_skb_tid_band(struct - */ - local_bh_disable(); - IEEE80211_SKB_CB(skb)->band = band; -- ieee80211_xmit(sdata, skb); -+ ieee80211_xmit(sdata, NULL, skb); - local_bh_enable(); - } diff --git a/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch b/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch new file mode 100644 index 0000000000..52fecb96b0 --- /dev/null +++ b/package/kernel/mac80211/patches/315-mac80211-fix-ibss-scan-parameters.patch @@ -0,0 +1,57 @@ +From: Sara Sharon <sara.sharon@intel.com> +Date: Mon, 25 Jan 2016 15:46:35 +0200 +Subject: [PATCH] mac80211: fix ibss scan parameters + +When joining IBSS a full scan should be initiated in order to search +for existing cell, unless the fixed_channel parameter was set. +A default channel to create the IBSS on if no cell was found is +provided as well. +However - a scan is initiated only on the default channel provided +regardless of whether ifibss->fixed_channel is set or not, with the +obvious result of the cell not joining existing IBSS cell that is +on another channel. + +Fixes: 76bed0f43b27 ("mac80211: IBSS fix scan request") +Signed-off-by: Sara Sharon <sara.sharon@intel.com> +Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> +--- + +--- a/net/mac80211/ibss.c ++++ b/net/mac80211/ibss.c +@@ -7,6 +7,7 @@ + * Copyright 2007, Michael Wu <flamingice@sourmilk.net> + * Copyright 2009, Johannes Berg <johannes@sipsolutions.net> + * Copyright 2013-2014 Intel Mobile Communications GmbH ++ * Copyright(c) 2016 Intel Deutschland GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +@@ -1483,14 +1484,21 @@ static void ieee80211_sta_find_ibss(stru + + sdata_info(sdata, "Trigger new scan to find an IBSS to join\n"); + +- num = ieee80211_ibss_setup_scan_channels(local->hw.wiphy, +- &ifibss->chandef, +- channels, +- ARRAY_SIZE(channels)); + scan_width = cfg80211_chandef_to_scan_width(&ifibss->chandef); +- ieee80211_request_ibss_scan(sdata, ifibss->ssid, +- ifibss->ssid_len, channels, num, +- scan_width); ++ ++ if (ifibss->fixed_channel) { ++ num = ieee80211_ibss_setup_scan_channels(local->hw.wiphy, ++ &ifibss->chandef, ++ channels, ++ ARRAY_SIZE(channels)); ++ ieee80211_request_ibss_scan(sdata, ifibss->ssid, ++ ifibss->ssid_len, channels, ++ num, scan_width); ++ } else { ++ ieee80211_request_ibss_scan(sdata, ifibss->ssid, ++ ifibss->ssid_len, NULL, ++ 0, scan_width); ++ } + } else { + int interval = IEEE80211_SCAN_INTERVAL; + diff --git a/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch b/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch deleted file mode 100644 index 77a82c25c6..0000000000 --- a/package/kernel/mac80211/patches/316-mac80211-reduce-log-spam-from-ieee80211_handle_pwr_c.patch +++ /dev/null @@ -1,38 +0,0 @@ -From: John Linville <linville@tuxdriver.com> -Date: Tue, 31 Mar 2015 10:49:14 -0400 -Subject: [PATCH] mac80211: reduce log spam from ieee80211_handle_pwr_constr - -This changes a couple of messages from sdata_info to sdata_dbg. -This should reduce some log spam, as reported here: - - https://bugzilla.redhat.com/show_bug.cgi?id=1206468 - -Signed-off-by: John W. Linville <linville@tuxdriver.com> -Signed-off-by: Johannes Berg <johannes.berg@intel.com> ---- - ---- a/net/mac80211/mlme.c -+++ b/net/mac80211/mlme.c -@@ -1347,15 +1347,15 @@ static u32 ieee80211_handle_pwr_constr(s - */ - if (has_80211h_pwr && - (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { -- sdata_info(sdata, -- "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", -- pwr_level_80211h, chan_pwr, pwr_reduction_80211h, -- sdata->u.mgd.bssid); -+ sdata_dbg(sdata, -+ "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", -+ pwr_level_80211h, chan_pwr, pwr_reduction_80211h, -+ sdata->u.mgd.bssid); - new_ap_level = pwr_level_80211h; - } else { /* has_cisco_pwr is always true here. */ -- sdata_info(sdata, -- "Limiting TX power to %d dBm as advertised by %pM\n", -- pwr_level_cisco, sdata->u.mgd.bssid); -+ sdata_dbg(sdata, -+ "Limiting TX power to %d dBm as advertised by %pM\n", -+ pwr_level_cisco, sdata->u.mgd.bssid); - new_ap_level = pwr_level_cisco; - } - diff --git a/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch b/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch new file mode 100644 index 0000000000..e78df36600 --- /dev/null +++ b/package/kernel/mac80211/patches/316-net-mac80211-agg-rx.c-fix-use-of-uninitialised-value.patch @@ -0,0 +1,50 @@ +From: Chris Bainbridge <chris.bainbridge@gmail.com> +Date: Wed, 27 Jan 2016 15:46:18 +0000 +Subject: [PATCH] net/mac80211/agg-rx.c: fix use of uninitialised values + +Use kzalloc instead of kmalloc for struct tid_ampdu_rx. Fixes: + +[ 7.976605] UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29 +[ 7.976608] load of value 2 is not a valid value for type '_Bool' +[ 7.976611] CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265 +[ 7.976613] Hardware name: Apple Inc. MacBookPro10,2/Mac-AFD8A9D944EA4843, BIOS MBP102.88Z.0106.B0A.1509130955 09/13/2015 +[ 7.976616] Workqueue: phy0 rt2x00usb_work_rxdone +[ 7.976619] 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007 +[ 7.976622] ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500 +[ 7.976626] ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032 +[ 7.976629] Call Trace: +[ 7.976633] [<ffffffff8181d866>] dump_stack+0x45/0x5f +[ 7.976637] [<ffffffff8188422d>] ubsan_epilogue+0xd/0x40 +[ 7.976642] [<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70 +[ 7.976646] [<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730 +[ 7.976650] [<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00 +[ 7.976654] [<ffffffff81cb27ce>] ? usb_hcd_map_urb_for_dma+0x65e/0x960 +[ 7.976659] [<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750 +[ 7.976663] [<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990 +[ 7.976667] [<ffffffff81c5fb85>] rt2x00lib_rxdone+0x305/0xbd0 +[ 7.976670] [<ffffffff811ac23f>] ? dequeue_task_fair+0x64f/0x1de0 +[ 7.976674] [<ffffffff811a1516>] ? sched_clock_cpu+0xe6/0x150 +[ 7.976678] [<ffffffff81c6c45c>] rt2x00usb_work_rxdone+0x7c/0x140 +[ 7.976682] [<ffffffff8117aef6>] process_one_work+0x226/0x860 +[ 7.976686] [<ffffffff8117b58c>] worker_thread+0x5c/0x680 +[ 7.976690] [<ffffffff8117b530>] ? process_one_work+0x860/0x860 +[ 7.976693] [<ffffffff81184f86>] kthread+0xf6/0x150 +[ 7.976697] [<ffffffff81184e90>] ? kthread_worker_fn+0x310/0x310 +[ 7.976700] [<ffffffff822a94df>] ret_from_fork+0x3f/0x70 +[ 7.976703] [<ffffffff81184e90>] ? kthread_worker_fn+0x310/0x310 + +Link: https://lkml.org/lkml/2016/1/26/230 +Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> +--- + +--- a/net/mac80211/agg-rx.c ++++ b/net/mac80211/agg-rx.c +@@ -327,7 +327,7 @@ void __ieee80211_start_rx_ba_session(str + } + + /* prepare A-MPDU MLME for Rx aggregation */ +- tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL); ++ tid_agg_rx = kzalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL); + if (!tid_agg_rx) + goto end; + diff --git a/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch b/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch deleted file mode 100644 index e005fe73d2..0000000000 --- a/package/kernel/mac80211/patches/317-brcmfmac-Fix-race-condition-in-msgbuf-ioctl-processi.patch +++ /dev/null @@ -1,35 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 6 Mar 2015 18:40:41 +0100 -Subject: [PATCH] brcmfmac: Fix race condition in msgbuf ioctl processing. - -Msgbuf is using a wait_event_timeout to wait for the response on -an ioctl. The wakeup routine uses waitqueue_active to see if -wait_event_timeout has been called. There is a chance that the -response arrives before wait_event_timeout is called, this -will result in situation that wait_event_timeout never gets -woken again and assumed result will be a timeout. This patch -removes that errornous situation by always setting the -ctl_completed var before checking for queue active. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -481,10 +481,9 @@ static int brcmf_msgbuf_ioctl_resp_wait( - - static void brcmf_msgbuf_ioctl_resp_wake(struct brcmf_msgbuf *msgbuf) - { -- if (waitqueue_active(&msgbuf->ioctl_resp_wait)) { -- msgbuf->ctl_completed = true; -+ msgbuf->ctl_completed = true; -+ if (waitqueue_active(&msgbuf->ioctl_resp_wait)) - wake_up(&msgbuf->ioctl_resp_wait); -- } - } - - diff --git a/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch b/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch new file mode 100644 index 0000000000..5bf53b918c --- /dev/null +++ b/package/kernel/mac80211/patches/317-mac80211-minstrel_ht-fix-out-of-bound-in-minstrel_ht.patch @@ -0,0 +1,45 @@ +From: Konstantin Khlebnikov <koct9i@gmail.com> +Date: Fri, 29 Jan 2016 11:35:12 +0300 +Subject: [PATCH] mac80211: minstrel_ht: fix out-of-bound in + minstrel_ht_set_best_prob_rate + +Patch fixes this splat + +BUG: KASAN: slab-out-of-bounds in minstrel_ht_update_stats.isra.7+0x6e1/0x9e0 +[mac80211] at addr ffff8800cee640f4 Read of size 4 by task swapper/3/0 + +Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> +Link: http://lkml.kernel.org/r/CALYGNiNyJhSaVnE35qS6UCGaSb2Dx1_i5HcRavuOX14oTz2P+w@mail.gmail.com +--- + +--- a/net/mac80211/rc80211_minstrel_ht.c ++++ b/net/mac80211/rc80211_minstrel_ht.c +@@ -414,15 +414,16 @@ minstrel_ht_set_best_prob_rate(struct mi + (max_tp_group != MINSTREL_CCK_GROUP)) + return; + ++ max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES; ++ max_gpr_idx = mg->max_group_prob_rate % MCS_GROUP_RATES; ++ max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma; ++ + if (mrs->prob_ewma > MINSTREL_FRAC(75, 100)) { + cur_tp_avg = minstrel_ht_get_tp_avg(mi, cur_group, cur_idx, + mrs->prob_ewma); + if (cur_tp_avg > tmp_tp_avg) + mi->max_prob_rate = index; + +- max_gpr_group = mg->max_group_prob_rate / MCS_GROUP_RATES; +- max_gpr_idx = mg->max_group_prob_rate % MCS_GROUP_RATES; +- max_gpr_prob = mi->groups[max_gpr_group].rates[max_gpr_idx].prob_ewma; + max_gpr_tp_avg = minstrel_ht_get_tp_avg(mi, max_gpr_group, + max_gpr_idx, + max_gpr_prob); +@@ -431,7 +432,7 @@ minstrel_ht_set_best_prob_rate(struct mi + } else { + if (mrs->prob_ewma > tmp_prob) + mi->max_prob_rate = index; +- if (mrs->prob_ewma > mg->rates[mg->max_group_prob_rate].prob_ewma) ++ if (mrs->prob_ewma > max_gpr_prob) + mg->max_group_prob_rate = index; + } + } diff --git a/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch b/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch deleted file mode 100644 index c2cd1c5c68..0000000000 --- a/package/kernel/mac80211/patches/318-brcmfmac-Update-msgbuf-commonring-size-for-improved-.patch +++ /dev/null @@ -1,30 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 18 Mar 2015 13:25:23 +0100 -Subject: [PATCH] brcmfmac: Update msgbuf commonring size for improved - throughput. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h -@@ -17,11 +17,11 @@ - - #ifdef CPTCFG_BRCMFMAC_PROTO_MSGBUF - --#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM 20 --#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM 256 --#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE_MAX_ITEM 20 -+#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM 64 -+#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM 512 -+#define BRCMF_D2H_MSGRING_CONTROL_COMPLETE_MAX_ITEM 64 - #define BRCMF_D2H_MSGRING_TX_COMPLETE_MAX_ITEM 1024 --#define BRCMF_D2H_MSGRING_RX_COMPLETE_MAX_ITEM 256 -+#define BRCMF_D2H_MSGRING_RX_COMPLETE_MAX_ITEM 512 - #define BRCMF_H2D_TXFLOWRING_MAX_ITEM 512 - - #define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_ITEMSIZE 40 diff --git a/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch b/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch new file mode 100644 index 0000000000..655dc4bfa9 --- /dev/null +++ b/package/kernel/mac80211/patches/318-mac80211-move-A-MSDU-skb_linearize-call-to-ieee80211.patch @@ -0,0 +1,35 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Tue, 2 Feb 2016 14:39:08 +0100 +Subject: [PATCH] mac80211: move A-MSDU skb_linearize call to + ieee80211_amsdu_to_8023s + +Prepararation for zero-copy A-MSDU support with page fragment SKBs + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +Signed-off-by: Johannes Berg <johannes.berg@intel.com> +--- + +--- a/net/mac80211/rx.c ++++ b/net/mac80211/rx.c +@@ -2203,9 +2203,6 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx + skb->dev = dev; + __skb_queue_head_init(&frame_list); + +- if (skb_linearize(skb)) +- return RX_DROP_UNUSABLE; +- + ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr, + rx->sdata->vif.type, + rx->local->hw.extra_tx_headroom, true); +--- a/net/wireless/util.c ++++ b/net/wireless/util.c +@@ -657,6 +657,9 @@ void ieee80211_amsdu_to_8023s(struct sk_ + int remaining, err; + u8 dst[ETH_ALEN], src[ETH_ALEN]; + ++ if (skb_linearize(skb)) ++ goto out; ++ + if (has_80211_header) { + err = ieee80211_data_to_8023(skb, addr, iftype); + if (err) diff --git a/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch b/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch deleted file mode 100644 index 6af69ebd2a..0000000000 --- a/package/kernel/mac80211/patches/319-ath9k_htc-add-new-WMI_REG_RMW_CMDID-command.patch +++ /dev/null @@ -1,307 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:46 +0100 -Subject: [PATCH] ath9k_htc: add new WMI_REG_RMW_CMDID command - -Since usb bus add extra delay on each request, a command -with read + write requests is too expensive. We can dramtically -reduce usb load by moving this command to firmware. - -In my tests, this patch will reduce channel scan time -for about 5-10 seconds. - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath.h -+++ b/drivers/net/wireless/ath/ath.h -@@ -131,6 +131,9 @@ struct ath_ops { - void (*enable_write_buffer)(void *); - void (*write_flush) (void *); - u32 (*rmw)(void *, u32 reg_offset, u32 set, u32 clr); -+ void (*enable_rmw_buffer)(void *); -+ void (*rmw_flush) (void *); -+ - }; - - struct ath_common; ---- a/drivers/net/wireless/ath/ath9k/htc.h -+++ b/drivers/net/wireless/ath/ath9k/htc.h -@@ -444,6 +444,10 @@ static inline void ath9k_htc_stop_btcoex - #define OP_BT_SCAN BIT(4) - #define OP_TSF_RESET BIT(6) - -+enum htc_op_flags { -+ HTC_FWFLAG_NO_RMW, -+}; -+ - struct ath9k_htc_priv { - struct device *dev; - struct ieee80211_hw *hw; -@@ -482,6 +486,7 @@ struct ath9k_htc_priv { - bool reconfig_beacon; - unsigned int rxfilter; - unsigned long op_flags; -+ unsigned long fw_flags; - - struct ath9k_hw_cal_data caldata; - struct ath_spec_scan_priv spec_priv; ---- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c -+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c -@@ -376,17 +376,139 @@ static void ath9k_regwrite_flush(void *h - mutex_unlock(&priv->wmi->multi_write_mutex); - } - --static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr) -+static void ath9k_reg_rmw_buffer(void *hw_priv, -+ u32 reg_offset, u32 set, u32 clr) -+{ -+ struct ath_hw *ah = (struct ath_hw *) hw_priv; -+ struct ath_common *common = ath9k_hw_common(ah); -+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv; -+ u32 rsp_status; -+ int r; -+ -+ mutex_lock(&priv->wmi->multi_rmw_mutex); -+ -+ /* Store the register/value */ -+ priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].reg = -+ cpu_to_be32(reg_offset); -+ priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].set = -+ cpu_to_be32(set); -+ priv->wmi->multi_rmw[priv->wmi->multi_rmw_idx].clr = -+ cpu_to_be32(clr); -+ -+ priv->wmi->multi_rmw_idx++; -+ -+ /* If the buffer is full, send it out. */ -+ if (priv->wmi->multi_rmw_idx == MAX_RMW_CMD_NUMBER) { -+ r = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID, -+ (u8 *) &priv->wmi->multi_rmw, -+ sizeof(struct register_write) * priv->wmi->multi_rmw_idx, -+ (u8 *) &rsp_status, sizeof(rsp_status), -+ 100); -+ if (unlikely(r)) { -+ ath_dbg(common, WMI, -+ "REGISTER RMW FAILED, multi len: %d\n", -+ priv->wmi->multi_rmw_idx); -+ } -+ priv->wmi->multi_rmw_idx = 0; -+ } -+ -+ mutex_unlock(&priv->wmi->multi_rmw_mutex); -+} -+ -+static void ath9k_reg_rmw_flush(void *hw_priv) - { -- u32 val; -+ struct ath_hw *ah = (struct ath_hw *) hw_priv; -+ struct ath_common *common = ath9k_hw_common(ah); -+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv; -+ u32 rsp_status; -+ int r; -+ -+ if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags)) -+ return; -+ -+ atomic_dec(&priv->wmi->m_rmw_cnt); -+ -+ mutex_lock(&priv->wmi->multi_rmw_mutex); -+ -+ if (priv->wmi->multi_rmw_idx) { -+ r = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID, -+ (u8 *) &priv->wmi->multi_rmw, -+ sizeof(struct register_rmw) * priv->wmi->multi_rmw_idx, -+ (u8 *) &rsp_status, sizeof(rsp_status), -+ 100); -+ if (unlikely(r)) { -+ ath_dbg(common, WMI, -+ "REGISTER RMW FAILED, multi len: %d\n", -+ priv->wmi->multi_rmw_idx); -+ } -+ priv->wmi->multi_rmw_idx = 0; -+ } - -- val = ath9k_regread(hw_priv, reg_offset); -- val &= ~clr; -- val |= set; -- ath9k_regwrite(hw_priv, val, reg_offset); -+ mutex_unlock(&priv->wmi->multi_rmw_mutex); -+} -+ -+static void ath9k_enable_rmw_buffer(void *hw_priv) -+{ -+ struct ath_hw *ah = (struct ath_hw *) hw_priv; -+ struct ath_common *common = ath9k_hw_common(ah); -+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv; -+ -+ if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags)) -+ return; -+ -+ atomic_inc(&priv->wmi->m_rmw_cnt); -+} -+ -+static u32 ath9k_reg_rmw_single(void *hw_priv, -+ u32 reg_offset, u32 set, u32 clr) -+{ -+ struct ath_hw *ah = (struct ath_hw *) hw_priv; -+ struct ath_common *common = ath9k_hw_common(ah); -+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv; -+ struct register_rmw buf, buf_ret; -+ int ret; -+ u32 val = 0; -+ -+ buf.reg = cpu_to_be32(reg_offset); -+ buf.set = cpu_to_be32(set); -+ buf.clr = cpu_to_be32(clr); -+ -+ ret = ath9k_wmi_cmd(priv->wmi, WMI_REG_RMW_CMDID, -+ (u8 *) &buf, sizeof(buf), -+ (u8 *) &buf_ret, sizeof(buf_ret), -+ 100); -+ if (unlikely(ret)) { -+ ath_dbg(common, WMI, "REGISTER RMW FAILED:(0x%04x, %d)\n", -+ reg_offset, ret); -+ } - return val; - } - -+static u32 ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr) -+{ -+ struct ath_hw *ah = (struct ath_hw *) hw_priv; -+ struct ath_common *common = ath9k_hw_common(ah); -+ struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv; -+ -+ if (test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags)) { -+ u32 val; -+ -+ val = REG_READ(ah, reg_offset); -+ val &= ~clr; -+ val |= set; -+ REG_WRITE(ah, reg_offset, val); -+ -+ return 0; -+ } -+ -+ if (atomic_read(&priv->wmi->m_rmw_cnt)) -+ ath9k_reg_rmw_buffer(hw_priv, reg_offset, set, clr); -+ else -+ ath9k_reg_rmw_single(hw_priv, reg_offset, set, clr); -+ -+ return 0; -+} -+ - static void ath_usb_read_cachesize(struct ath_common *common, int *csz) - { - *csz = L1_CACHE_BYTES >> 2; -@@ -501,6 +623,8 @@ static int ath9k_init_priv(struct ath9k_ - ah->reg_ops.write = ath9k_regwrite; - ah->reg_ops.enable_write_buffer = ath9k_enable_regwrite_buffer; - ah->reg_ops.write_flush = ath9k_regwrite_flush; -+ ah->reg_ops.enable_rmw_buffer = ath9k_enable_rmw_buffer; -+ ah->reg_ops.rmw_flush = ath9k_reg_rmw_flush; - ah->reg_ops.rmw = ath9k_reg_rmw; - priv->ah = ah; - -@@ -686,6 +810,12 @@ static int ath9k_init_firmware_version(s - return -EINVAL; - } - -+ if (priv->fw_version_major == 1 && priv->fw_version_minor < 4) -+ set_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags); -+ -+ dev_info(priv->dev, "FW RMW support: %s\n", -+ test_bit(HTC_FWFLAG_NO_RMW, &priv->fw_flags) ? "Off" : "On"); -+ - return 0; - } - ---- a/drivers/net/wireless/ath/ath9k/hw.h -+++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -100,6 +100,18 @@ - (_ah)->reg_ops.write_flush((_ah)); \ - } while (0) - -+#define ENABLE_REG_RMW_BUFFER(_ah) \ -+ do { \ -+ if ((_ah)->reg_ops.enable_rmw_buffer) \ -+ (_ah)->reg_ops.enable_rmw_buffer((_ah)); \ -+ } while (0) -+ -+#define REG_RMW_BUFFER_FLUSH(_ah) \ -+ do { \ -+ if ((_ah)->reg_ops.rmw_flush) \ -+ (_ah)->reg_ops.rmw_flush((_ah)); \ -+ } while (0) -+ - #define PR_EEP(_s, _val) \ - do { \ - len += scnprintf(buf + len, size - len, "%20s : %10d\n",\ ---- a/drivers/net/wireless/ath/ath9k/wmi.c -+++ b/drivers/net/wireless/ath/ath9k/wmi.c -@@ -61,6 +61,8 @@ static const char *wmi_cmd_to_name(enum - return "WMI_REG_READ_CMDID"; - case WMI_REG_WRITE_CMDID: - return "WMI_REG_WRITE_CMDID"; -+ case WMI_REG_RMW_CMDID: -+ return "WMI_REG_RMW_CMDID"; - case WMI_RC_STATE_CHANGE_CMDID: - return "WMI_RC_STATE_CHANGE_CMDID"; - case WMI_RC_RATE_UPDATE_CMDID: -@@ -101,6 +103,7 @@ struct wmi *ath9k_init_wmi(struct ath9k_ - spin_lock_init(&wmi->event_lock); - mutex_init(&wmi->op_mutex); - mutex_init(&wmi->multi_write_mutex); -+ mutex_init(&wmi->multi_rmw_mutex); - init_completion(&wmi->cmd_wait); - INIT_LIST_HEAD(&wmi->pending_tx_events); - tasklet_init(&wmi->wmi_event_tasklet, ath9k_wmi_event_tasklet, ---- a/drivers/net/wireless/ath/ath9k/wmi.h -+++ b/drivers/net/wireless/ath/ath9k/wmi.h -@@ -112,6 +112,7 @@ enum wmi_cmd_id { - WMI_TX_STATS_CMDID, - WMI_RX_STATS_CMDID, - WMI_BITRATE_MASK_CMDID, -+ WMI_REG_RMW_CMDID, - }; - - enum wmi_event_id { -@@ -125,12 +126,19 @@ enum wmi_event_id { - }; - - #define MAX_CMD_NUMBER 62 -+#define MAX_RMW_CMD_NUMBER 15 - - struct register_write { - __be32 reg; - __be32 val; - }; - -+struct register_rmw { -+ __be32 reg; -+ __be32 set; -+ __be32 clr; -+} __packed; -+ - struct ath9k_htc_tx_event { - int count; - struct __wmi_event_txstatus txs; -@@ -156,10 +164,18 @@ struct wmi { - - spinlock_t wmi_lock; - -+ /* multi write section */ - atomic_t mwrite_cnt; - struct register_write multi_write[MAX_CMD_NUMBER]; - u32 multi_write_idx; - struct mutex multi_write_mutex; -+ -+ /* multi rmw section */ -+ atomic_t m_rmw_cnt; -+ struct register_rmw multi_rmw[MAX_RMW_CMD_NUMBER]; -+ u32 multi_rmw_idx; -+ struct mutex multi_rmw_mutex; -+ - }; - - struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv); diff --git a/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch b/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch new file mode 100644 index 0000000000..b646ab36dd --- /dev/null +++ b/package/kernel/mac80211/patches/319-cfg80211-add-function-for-802.3-conversion-with-sepa.patch @@ -0,0 +1,186 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Tue, 2 Feb 2016 14:39:09 +0100 +Subject: [PATCH] cfg80211: add function for 802.3 conversion with separate + output buffer + +Use skb_copy_bits in preparation for allowing fragmented skbs + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +Signed-off-by: Johannes Berg <johannes.berg@intel.com> +--- + +--- a/net/wireless/util.c ++++ b/net/wireless/util.c +@@ -393,9 +393,9 @@ unsigned int ieee80211_get_hdrlen_from_s + } + EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); + +-unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) ++static unsigned int __ieee80211_get_mesh_hdrlen(u8 flags) + { +- int ae = meshhdr->flags & MESH_FLAGS_AE; ++ int ae = flags & MESH_FLAGS_AE; + /* 802.11-2012, 8.2.4.7.3 */ + switch (ae) { + default: +@@ -407,21 +407,31 @@ unsigned int ieee80211_get_mesh_hdrlen(s + return 18; + } + } ++ ++unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) ++{ ++ return __ieee80211_get_mesh_hdrlen(meshhdr->flags); ++} + EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen); + +-int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, +- enum nl80211_iftype iftype) ++static int __ieee80211_data_to_8023(struct sk_buff *skb, struct ethhdr *ehdr, ++ const u8 *addr, enum nl80211_iftype iftype) + { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; +- u16 hdrlen, ethertype; +- u8 *payload; +- u8 dst[ETH_ALEN]; +- u8 src[ETH_ALEN] __aligned(2); ++ struct { ++ u8 hdr[ETH_ALEN] __aligned(2); ++ __be16 proto; ++ } payload; ++ struct ethhdr tmp; ++ u16 hdrlen; ++ u8 mesh_flags = 0; + + if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) + return -1; + + hdrlen = ieee80211_hdrlen(hdr->frame_control); ++ if (skb->len < hdrlen + 8) ++ return -1; + + /* convert IEEE 802.11 header + possible LLC headers into Ethernet + * header +@@ -432,8 +442,11 @@ int ieee80211_data_to_8023(struct sk_buf + * 1 0 BSSID SA DA n/a + * 1 1 RA TA DA SA + */ +- memcpy(dst, ieee80211_get_DA(hdr), ETH_ALEN); +- memcpy(src, ieee80211_get_SA(hdr), ETH_ALEN); ++ memcpy(tmp.h_dest, ieee80211_get_DA(hdr), ETH_ALEN); ++ memcpy(tmp.h_source, ieee80211_get_SA(hdr), ETH_ALEN); ++ ++ if (iftype == NL80211_IFTYPE_MESH_POINT) ++ skb_copy_bits(skb, hdrlen, &mesh_flags, 1); + + switch (hdr->frame_control & + cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { +@@ -450,44 +463,31 @@ int ieee80211_data_to_8023(struct sk_buf + iftype != NL80211_IFTYPE_STATION)) + return -1; + if (iftype == NL80211_IFTYPE_MESH_POINT) { +- struct ieee80211s_hdr *meshdr = +- (struct ieee80211s_hdr *) (skb->data + hdrlen); +- /* make sure meshdr->flags is on the linear part */ +- if (!pskb_may_pull(skb, hdrlen + 1)) +- return -1; +- if (meshdr->flags & MESH_FLAGS_AE_A4) ++ if (mesh_flags & MESH_FLAGS_AE_A4) + return -1; +- if (meshdr->flags & MESH_FLAGS_AE_A5_A6) { ++ if (mesh_flags & MESH_FLAGS_AE_A5_A6) { + skb_copy_bits(skb, hdrlen + + offsetof(struct ieee80211s_hdr, eaddr1), +- dst, ETH_ALEN); +- skb_copy_bits(skb, hdrlen + +- offsetof(struct ieee80211s_hdr, eaddr2), +- src, ETH_ALEN); ++ tmp.h_dest, 2 * ETH_ALEN); + } +- hdrlen += ieee80211_get_mesh_hdrlen(meshdr); ++ hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags); + } + break; + case cpu_to_le16(IEEE80211_FCTL_FROMDS): + if ((iftype != NL80211_IFTYPE_STATION && + iftype != NL80211_IFTYPE_P2P_CLIENT && + iftype != NL80211_IFTYPE_MESH_POINT) || +- (is_multicast_ether_addr(dst) && +- ether_addr_equal(src, addr))) ++ (is_multicast_ether_addr(tmp.h_dest) && ++ ether_addr_equal(tmp.h_source, addr))) + return -1; + if (iftype == NL80211_IFTYPE_MESH_POINT) { +- struct ieee80211s_hdr *meshdr = +- (struct ieee80211s_hdr *) (skb->data + hdrlen); +- /* make sure meshdr->flags is on the linear part */ +- if (!pskb_may_pull(skb, hdrlen + 1)) +- return -1; +- if (meshdr->flags & MESH_FLAGS_AE_A5_A6) ++ if (mesh_flags & MESH_FLAGS_AE_A5_A6) + return -1; +- if (meshdr->flags & MESH_FLAGS_AE_A4) ++ if (mesh_flags & MESH_FLAGS_AE_A4) + skb_copy_bits(skb, hdrlen + + offsetof(struct ieee80211s_hdr, eaddr1), +- src, ETH_ALEN); +- hdrlen += ieee80211_get_mesh_hdrlen(meshdr); ++ tmp.h_source, ETH_ALEN); ++ hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags); + } + break; + case cpu_to_le16(0): +@@ -498,33 +498,33 @@ int ieee80211_data_to_8023(struct sk_buf + break; + } + +- if (!pskb_may_pull(skb, hdrlen + 8)) +- return -1; +- +- payload = skb->data + hdrlen; +- ethertype = (payload[6] << 8) | payload[7]; ++ skb_copy_bits(skb, hdrlen, &payload, sizeof(payload)); ++ tmp.h_proto = payload.proto; + +- if (likely((ether_addr_equal(payload, rfc1042_header) && +- ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || +- ether_addr_equal(payload, bridge_tunnel_header))) { ++ if (likely((ether_addr_equal(payload.hdr, rfc1042_header) && ++ tmp.h_proto != htons(ETH_P_AARP) && ++ tmp.h_proto != htons(ETH_P_IPX)) || ++ ether_addr_equal(payload.hdr, bridge_tunnel_header))) + /* remove RFC1042 or Bridge-Tunnel encapsulation and + * replace EtherType */ +- skb_pull(skb, hdrlen + 6); +- memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN); +- memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN); +- } else { +- struct ethhdr *ehdr; +- __be16 len; ++ hdrlen += ETH_ALEN + 2; ++ else ++ tmp.h_proto = htons(skb->len); + +- skb_pull(skb, hdrlen); +- len = htons(skb->len); ++ pskb_pull(skb, hdrlen); ++ ++ if (!ehdr) + ehdr = (struct ethhdr *) skb_push(skb, sizeof(struct ethhdr)); +- memcpy(ehdr->h_dest, dst, ETH_ALEN); +- memcpy(ehdr->h_source, src, ETH_ALEN); +- ehdr->h_proto = len; +- } ++ memcpy(ehdr, &tmp, sizeof(tmp)); ++ + return 0; + } ++ ++int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, ++ enum nl80211_iftype iftype) ++{ ++ return __ieee80211_data_to_8023(skb, NULL, addr, iftype); ++} + EXPORT_SYMBOL(ieee80211_data_to_8023); + + int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, diff --git a/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch b/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch deleted file mode 100644 index c4dd1af187..0000000000 --- a/package/kernel/mac80211/patches/320-ath9k-ar9271_hw_pa_cal-use-defs-instead-of-magin-num.patch +++ /dev/null @@ -1,89 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:47 +0100 -Subject: [PATCH] ath9k: ar9271_hw_pa_cal - use defs instead of magin - numbers - -This function uses mixed styles for register names/numbers which -is make harder reading and optimisation. - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c -@@ -430,22 +430,22 @@ static void ar9271_hw_pa_cal(struct ath_ - u32 regVal; - unsigned int i; - u32 regList[][2] = { -- { 0x786c, 0 }, -- { 0x7854, 0 }, -- { 0x7820, 0 }, -- { 0x7824, 0 }, -- { 0x7868, 0 }, -- { 0x783c, 0 }, -- { 0x7838, 0 } , -- { 0x7828, 0 } , -+ { AR9285_AN_TOP3, 0 }, -+ { AR9285_AN_RXTXBB1, 0 }, -+ { AR9285_AN_RF2G1, 0 }, -+ { AR9285_AN_RF2G2, 0 }, -+ { AR9285_AN_TOP2, 0 }, -+ { AR9285_AN_RF2G8, 0 }, -+ { AR9285_AN_RF2G7, 0 } , -+ { AR9285_AN_RF2G3, 0 } , - }; - - for (i = 0; i < ARRAY_SIZE(regList); i++) - regList[i][1] = REG_READ(ah, regList[i][0]); - -- regVal = REG_READ(ah, 0x7834); -+ regVal = REG_READ(ah, AR9285_AN_RF2G6); - regVal &= (~(0x1)); -- REG_WRITE(ah, 0x7834, regVal); -+ REG_WRITE(ah, AR9285_AN_RF2G6, regVal); - regVal = REG_READ(ah, 0x9808); - regVal |= (0x1 << 27); - REG_WRITE(ah, 0x9808, regVal); -@@ -477,7 +477,7 @@ static void ar9271_hw_pa_cal(struct ath_ - * does not matter since we turn it off - */ - REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0); -- -+ /* 7828, b0-11, ccom=fff */ - REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff); - - /* Set: -@@ -490,15 +490,16 @@ static void ar9271_hw_pa_cal(struct ath_ - - /* find off_6_1; */ - for (i = 6; i > 0; i--) { -- regVal = REG_READ(ah, 0x7834); -+ regVal = REG_READ(ah, AR9285_AN_RF2G6); - regVal |= (1 << (20 + i)); -- REG_WRITE(ah, 0x7834, regVal); -+ REG_WRITE(ah, AR9285_AN_RF2G6, regVal); - udelay(1); - /* regVal = REG_READ(ah, 0x7834); */ - regVal &= (~(0x1 << (20 + i))); -- regVal |= (MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9) -+ regVal |= (MS(REG_READ(ah, AR9285_AN_RF2G9), -+ AR9285_AN_RXTXBB1_SPARE9) - << (20 + i)); -- REG_WRITE(ah, 0x7834, regVal); -+ REG_WRITE(ah, AR9285_AN_RF2G6, regVal); - } - - regVal = (regVal >> 20) & 0x7f; -@@ -517,9 +518,9 @@ static void ar9271_hw_pa_cal(struct ath_ - - ENABLE_REGWRITE_BUFFER(ah); - -- regVal = REG_READ(ah, 0x7834); -+ regVal = REG_READ(ah, AR_AN_RF2G1_CH1); - regVal |= 0x1; -- REG_WRITE(ah, 0x7834, regVal); -+ REG_WRITE(ah, AR_AN_RF2G1_CH1, regVal); - regVal = REG_READ(ah, 0x9808); - regVal &= (~(0x1 << 27)); - REG_WRITE(ah, 0x9808, regVal); diff --git a/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch b/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch new file mode 100644 index 0000000000..2eeed22af0 --- /dev/null +++ b/package/kernel/mac80211/patches/320-cfg80211-add-support-for-non-linear-skbs-in-ieee8021.patch @@ -0,0 +1,159 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Tue, 2 Feb 2016 14:39:10 +0100 +Subject: [PATCH] cfg80211: add support for non-linear skbs in + ieee80211_amsdu_to_8023s + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +Signed-off-by: Johannes Berg <johannes.berg@intel.com> +--- + +--- a/net/wireless/util.c ++++ b/net/wireless/util.c +@@ -644,73 +644,75 @@ int ieee80211_data_from_8023(struct sk_b + } + EXPORT_SYMBOL(ieee80211_data_from_8023); + ++static struct sk_buff * ++__ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen, ++ int offset, int len) ++{ ++ struct sk_buff *frame; ++ ++ if (skb->len - offset < len) ++ return NULL; ++ ++ /* ++ * Allocate and reserve two bytes more for payload ++ * alignment since sizeof(struct ethhdr) is 14. ++ */ ++ frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + len); ++ ++ skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); ++ skb_copy_bits(skb, offset, skb_put(frame, len), len); ++ ++ return frame; ++} + + void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, + const u8 *addr, enum nl80211_iftype iftype, + const unsigned int extra_headroom, + bool has_80211_header) + { ++ unsigned int hlen = ALIGN(extra_headroom, 4); + struct sk_buff *frame = NULL; + u16 ethertype; + u8 *payload; +- const struct ethhdr *eth; +- int remaining, err; +- u8 dst[ETH_ALEN], src[ETH_ALEN]; +- +- if (skb_linearize(skb)) +- goto out; ++ int offset = 0, remaining, err; ++ struct ethhdr eth; ++ bool reuse_skb = true; ++ bool last = false; + + if (has_80211_header) { +- err = ieee80211_data_to_8023(skb, addr, iftype); ++ err = __ieee80211_data_to_8023(skb, ð, addr, iftype); + if (err) + goto out; +- +- /* skip the wrapping header */ +- eth = (struct ethhdr *) skb_pull(skb, sizeof(struct ethhdr)); +- if (!eth) +- goto out; +- } else { +- eth = (struct ethhdr *) skb->data; + } + +- while (skb != frame) { ++ while (!last) { ++ unsigned int subframe_len; ++ int len; + u8 padding; +- __be16 len = eth->h_proto; +- unsigned int subframe_len = sizeof(struct ethhdr) + ntohs(len); +- +- remaining = skb->len; +- memcpy(dst, eth->h_dest, ETH_ALEN); +- memcpy(src, eth->h_source, ETH_ALEN); + ++ skb_copy_bits(skb, offset, ð, sizeof(eth)); ++ len = ntohs(eth.h_proto); ++ subframe_len = sizeof(struct ethhdr) + len; + padding = (4 - subframe_len) & 0x3; ++ + /* the last MSDU has no padding */ ++ remaining = skb->len - offset; + if (subframe_len > remaining) + goto purge; + +- skb_pull(skb, sizeof(struct ethhdr)); ++ offset += sizeof(struct ethhdr); + /* reuse skb for the last subframe */ +- if (remaining <= subframe_len + padding) ++ last = remaining <= subframe_len + padding; ++ if (!skb_is_nonlinear(skb) && last) { ++ skb_pull(skb, offset); + frame = skb; +- else { +- unsigned int hlen = ALIGN(extra_headroom, 4); +- /* +- * Allocate and reserve two bytes more for payload +- * alignment since sizeof(struct ethhdr) is 14. +- */ +- frame = dev_alloc_skb(hlen + subframe_len + 2); ++ reuse_skb = true; ++ } else { ++ frame = __ieee80211_amsdu_copy(skb, hlen, offset, len); + if (!frame) + goto purge; + +- skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); +- memcpy(skb_put(frame, ntohs(len)), skb->data, +- ntohs(len)); +- +- eth = (struct ethhdr *)skb_pull(skb, ntohs(len) + +- padding); +- if (!eth) { +- dev_kfree_skb(frame); +- goto purge; +- } ++ offset += len + padding; + } + + skb_reset_network_header(frame); +@@ -719,24 +721,20 @@ void ieee80211_amsdu_to_8023s(struct sk_ + + payload = frame->data; + ethertype = (payload[6] << 8) | payload[7]; +- + if (likely((ether_addr_equal(payload, rfc1042_header) && + ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || + ether_addr_equal(payload, bridge_tunnel_header))) { +- /* remove RFC1042 or Bridge-Tunnel +- * encapsulation and replace EtherType */ +- skb_pull(frame, 6); +- memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); +- memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); +- } else { +- memcpy(skb_push(frame, sizeof(__be16)), &len, +- sizeof(__be16)); +- memcpy(skb_push(frame, ETH_ALEN), src, ETH_ALEN); +- memcpy(skb_push(frame, ETH_ALEN), dst, ETH_ALEN); ++ eth.h_proto = htons(ethertype); ++ skb_pull(frame, ETH_ALEN + 2); + } ++ ++ memcpy(skb_push(frame, sizeof(eth)), ð, sizeof(eth)); + __skb_queue_tail(list, frame); + } + ++ if (!reuse_skb) ++ dev_kfree_skb(skb); ++ + return; + + purge: diff --git a/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch b/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch deleted file mode 100644 index f05287d919..0000000000 --- a/package/kernel/mac80211/patches/321-ath9k-ar9271_hw_pa_cal-use-proper-makroses.patch +++ /dev/null @@ -1,79 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:48 +0100 -Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use proper makroses. - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c -@@ -443,33 +443,30 @@ static void ar9271_hw_pa_cal(struct ath_ - for (i = 0; i < ARRAY_SIZE(regList); i++) - regList[i][1] = REG_READ(ah, regList[i][0]); - -- regVal = REG_READ(ah, AR9285_AN_RF2G6); -- regVal &= (~(0x1)); -- REG_WRITE(ah, AR9285_AN_RF2G6, regVal); -- regVal = REG_READ(ah, 0x9808); -- regVal |= (0x1 << 27); -- REG_WRITE(ah, 0x9808, regVal); -- -+ /* 7834, b1=0 */ -+ REG_CLR_BIT(ah, AR9285_AN_RF2G6, 1 << 0); -+ /* 9808, b27=1 */ -+ REG_SET_BIT(ah, 0x9808, 1 << 27); - /* 786c,b23,1, pwddac=1 */ -- REG_RMW_FIELD(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC, 1); -+ REG_SET_BIT(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC); - /* 7854, b5,1, pdrxtxbb=1 */ -- REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1, 1); -+ REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1); - /* 7854, b7,1, pdv2i=1 */ -- REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I, 1); -+ REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I); - /* 7854, b8,1, pddacinterface=1 */ -- REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF, 1); -+ REG_SET_BIT(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF); - /* 7824,b12,0, offcal=0 */ -- REG_RMW_FIELD(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL, 0); -+ REG_CLR_BIT(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL); - /* 7838, b1,0, pwddb=0 */ -- REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB, 0); -+ REG_CLR_BIT(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB); - /* 7820,b11,0, enpacal=0 */ -- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL, 0); -+ REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL); - /* 7820,b25,1, pdpadrv1=0 */ -- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0); -+ REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1); - /* 7820,b24,0, pdpadrv2=0 */ -- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2, 0); -+ REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2); - /* 7820,b23,0, pdpaout=0 */ -- REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0); -+ REG_CLR_BIT(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT); - /* 783c,b14-16,7, padrvgn2tab_0=7 */ - REG_RMW_FIELD(ah, AR9285_AN_RF2G8, AR9285_AN_RF2G8_PADRVGN2TAB0, 7); - /* -@@ -516,15 +513,13 @@ static void ar9271_hw_pa_cal(struct ath_ - ah->pacal_info.prev_offset = regVal; - } - -- ENABLE_REGWRITE_BUFFER(ah); - -- regVal = REG_READ(ah, AR_AN_RF2G1_CH1); -- regVal |= 0x1; -- REG_WRITE(ah, AR_AN_RF2G1_CH1, regVal); -- regVal = REG_READ(ah, 0x9808); -- regVal &= (~(0x1 << 27)); -- REG_WRITE(ah, 0x9808, regVal); -+ /* 7834, b1=1 */ -+ REG_SET_BIT(ah, AR9285_AN_RF2G6, 1 << 0); -+ /* 9808, b27=0 */ -+ REG_CLR_BIT(ah, 0x9808, 1 << 27); - -+ ENABLE_REGWRITE_BUFFER(ah); - for (i = 0; i < ARRAY_SIZE(regList); i++) - REG_WRITE(ah, regList[i][0], regList[i][1]); - diff --git a/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch b/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch new file mode 100644 index 0000000000..c4155a1181 --- /dev/null +++ b/package/kernel/mac80211/patches/321-mac80211-Parse-legacy-and-HT-rate-in-injected-frames.patch @@ -0,0 +1,155 @@ +From: Sven Eckelmann <sven@narfation.org> +Date: Tue, 26 Jan 2016 17:11:13 +0100 +Subject: [PATCH] mac80211: Parse legacy and HT rate in injected frames + +Drivers/devices without their own rate control algorithm can get the +information what rates they should use from either the radiotap header of +injected frames or from the rate control algorithm. But the parsing of the +legacy rate information from the radiotap header was removed in commit +e6a9854b05c1 ("mac80211/drivers: rewrite the rate control API"). + +The removal of this feature heavily reduced the usefulness of frame +injection when wanting to simulate specific transmission behavior. Having +rate parsing together with MCS rates and retry support allows a fine +grained selection of the tx behavior of injected frames for these kind of +tests. + +Signed-off-by: Sven Eckelmann <sven@narfation.org> +Cc: Simon Wunderlich <sw@simonwunderlich.de> +Signed-off-by: Johannes Berg <johannes.berg@intel.com> +--- + +--- a/include/net/mac80211.h ++++ b/include/net/mac80211.h +@@ -708,12 +708,14 @@ enum mac80211_tx_info_flags { + * protocol frame (e.g. EAP) + * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll + * frame (PS-Poll or uAPSD). ++ * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information + * + * These flags are used in tx_info->control.flags. + */ + enum mac80211_tx_control_flags { + IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0), + IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1), ++ IEEE80211_TX_CTRL_RATE_INJECT = BIT(2), + }; + + /* +--- a/net/mac80211/tx.c ++++ b/net/mac80211/tx.c +@@ -710,6 +710,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021 + + info->control.short_preamble = txrc.short_preamble; + ++ /* don't ask rate control when rate already injected via radiotap */ ++ if (info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT) ++ return TX_CONTINUE; ++ + if (tx->sta) + assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); + +@@ -1665,15 +1669,24 @@ void ieee80211_xmit(struct ieee80211_sub + ieee80211_tx(sdata, sta, skb, false); + } + +-static bool ieee80211_parse_tx_radiotap(struct sk_buff *skb) ++static bool ieee80211_parse_tx_radiotap(struct ieee80211_local *local, ++ struct sk_buff *skb) + { + struct ieee80211_radiotap_iterator iterator; + struct ieee80211_radiotap_header *rthdr = + (struct ieee80211_radiotap_header *) skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); ++ struct ieee80211_supported_band *sband = ++ local->hw.wiphy->bands[info->band]; + int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len, + NULL); + u16 txflags; ++ u16 rate = 0; ++ bool rate_found = false; ++ u8 rate_retries = 0; ++ u16 rate_flags = 0; ++ u8 mcs_known, mcs_flags; ++ int i; + + info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | + IEEE80211_TX_CTL_DONTFRAG; +@@ -1724,6 +1737,35 @@ static bool ieee80211_parse_tx_radiotap( + info->flags |= IEEE80211_TX_CTL_NO_ACK; + break; + ++ case IEEE80211_RADIOTAP_RATE: ++ rate = *iterator.this_arg; ++ rate_flags = 0; ++ rate_found = true; ++ break; ++ ++ case IEEE80211_RADIOTAP_DATA_RETRIES: ++ rate_retries = *iterator.this_arg; ++ break; ++ ++ case IEEE80211_RADIOTAP_MCS: ++ mcs_known = iterator.this_arg[0]; ++ mcs_flags = iterator.this_arg[1]; ++ if (!(mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_MCS)) ++ break; ++ ++ rate_found = true; ++ rate = iterator.this_arg[2]; ++ rate_flags = IEEE80211_TX_RC_MCS; ++ ++ if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_GI && ++ mcs_flags & IEEE80211_RADIOTAP_MCS_SGI) ++ rate_flags |= IEEE80211_TX_RC_SHORT_GI; ++ ++ if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW && ++ mcs_flags & IEEE80211_RADIOTAP_MCS_BW_40) ++ rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; ++ break; ++ + /* + * Please update the file + * Documentation/networking/mac80211-injection.txt +@@ -1738,6 +1780,32 @@ static bool ieee80211_parse_tx_radiotap( + if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ + return false; + ++ if (rate_found) { ++ info->control.flags |= IEEE80211_TX_CTRL_RATE_INJECT; ++ ++ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { ++ info->control.rates[i].idx = -1; ++ info->control.rates[i].flags = 0; ++ info->control.rates[i].count = 0; ++ } ++ ++ if (rate_flags & IEEE80211_TX_RC_MCS) { ++ info->control.rates[0].idx = rate; ++ } else { ++ for (i = 0; i < sband->n_bitrates; i++) { ++ if (rate * 5 != sband->bitrates[i].bitrate) ++ continue; ++ ++ info->control.rates[0].idx = i; ++ break; ++ } ++ } ++ ++ info->control.rates[0].flags = rate_flags; ++ info->control.rates[0].count = min_t(u8, rate_retries + 1, ++ local->hw.max_rate_tries); ++ } ++ + /* + * remove the radiotap header + * iterator->_max_length was sanity-checked against +@@ -1819,7 +1887,7 @@ netdev_tx_t ieee80211_monitor_start_xmit + IEEE80211_TX_CTL_INJECTED; + + /* process and remove the injection radiotap header */ +- if (!ieee80211_parse_tx_radiotap(skb)) ++ if (!ieee80211_parse_tx_radiotap(local, skb)) + goto fail; + + rcu_read_lock(); diff --git a/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch b/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch deleted file mode 100644 index 7247369498..0000000000 --- a/package/kernel/mac80211/patches/322-ath9k-ar9271_hw_pa_cal-use-RMW-buffer.patch +++ /dev/null @@ -1,48 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:49 +0100 -Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use RMW buffer - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c -@@ -436,13 +436,14 @@ static void ar9271_hw_pa_cal(struct ath_ - { AR9285_AN_RF2G2, 0 }, - { AR9285_AN_TOP2, 0 }, - { AR9285_AN_RF2G8, 0 }, -- { AR9285_AN_RF2G7, 0 } , -- { AR9285_AN_RF2G3, 0 } , -+ { AR9285_AN_RF2G7, 0 }, -+ { AR9285_AN_RF2G3, 0 }, - }; - - for (i = 0; i < ARRAY_SIZE(regList); i++) - regList[i][1] = REG_READ(ah, regList[i][0]); - -+ ENABLE_REG_RMW_BUFFER(ah); - /* 7834, b1=0 */ - REG_CLR_BIT(ah, AR9285_AN_RF2G6, 1 << 0); - /* 9808, b27=1 */ -@@ -476,6 +477,7 @@ static void ar9271_hw_pa_cal(struct ath_ - REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0); - /* 7828, b0-11, ccom=fff */ - REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff); -+ REG_RMW_BUFFER_FLUSH(ah); - - /* Set: - * localmode=1,bmode=1,bmoderxtx=1,synthon=1, -@@ -514,10 +516,12 @@ static void ar9271_hw_pa_cal(struct ath_ - } - - -+ ENABLE_REG_RMW_BUFFER(ah); - /* 7834, b1=1 */ - REG_SET_BIT(ah, AR9285_AN_RF2G6, 1 << 0); - /* 9808, b27=0 */ - REG_CLR_BIT(ah, 0x9808, 1 << 27); -+ REG_RMW_BUFFER_FLUSH(ah); - - ENABLE_REGWRITE_BUFFER(ah); - for (i = 0; i < ARRAY_SIZE(regList); i++) diff --git a/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch b/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch new file mode 100644 index 0000000000..e7bfb9c83d --- /dev/null +++ b/package/kernel/mac80211/patches/322-mac80211-add-A-MSDU-tx-support.patch @@ -0,0 +1,317 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Fri, 5 Feb 2016 01:38:51 +0100 +Subject: [PATCH] mac80211: add A-MSDU tx support + +Requires software tx queueing support. frag_list support (for zero-copy) +is optional. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/include/net/mac80211.h ++++ b/include/net/mac80211.h +@@ -709,6 +709,7 @@ enum mac80211_tx_info_flags { + * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll + * frame (PS-Poll or uAPSD). + * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information ++ * @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame + * + * These flags are used in tx_info->control.flags. + */ +@@ -716,6 +717,7 @@ enum mac80211_tx_control_flags { + IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0), + IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1), + IEEE80211_TX_CTRL_RATE_INJECT = BIT(2), ++ IEEE80211_TX_CTRL_AMSDU = BIT(3), + }; + + /* +@@ -1728,6 +1730,7 @@ struct ieee80211_sta_rates { + * size is min(max_amsdu_len, 7935) bytes. + * Both additional HT limits must be enforced by the low level driver. + * This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2). ++ * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control. + * @txq: per-TID data TX queues (if driver uses the TXQ abstraction) + */ + struct ieee80211_sta { +@@ -1748,6 +1751,7 @@ struct ieee80211_sta { + bool mfp; + u8 max_amsdu_subframes; + u16 max_amsdu_len; ++ u16 max_rc_amsdu_len; + + struct ieee80211_txq *txq[IEEE80211_NUM_TIDS]; + +@@ -1961,6 +1965,15 @@ struct ieee80211_txq { + * order and does not need to manage its own reorder buffer or BA session + * timeout. + * ++ * @IEEE80211_HW_TX_AMSDU: Hardware (or driver) supports software aggregated ++ * A-MSDU frames. Requires software tx queueing and fast-xmit support. ++ * When not using minstrel/minstrel_ht rate control, the driver should ++ * limit the maximum A-MSDU size based on the current tx rate by setting ++ * max_rc_amsdu_len in struct ieee80211_sta. ++ * ++ * @IEEE80211_HW_TX_FRAG_LIST: Hardware (or driver) supports sending frag_list ++ * skbs, needed for zero-copy software A-MSDU. ++ * + * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays + */ + enum ieee80211_hw_flags { +@@ -1998,6 +2011,8 @@ enum ieee80211_hw_flags { + IEEE80211_HW_BEACON_TX_STATUS, + IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR, + IEEE80211_HW_SUPPORTS_REORDERING_BUFFER, ++ IEEE80211_HW_TX_AMSDU, ++ IEEE80211_HW_TX_FRAG_LIST, + + /* keep last, obviously */ + NUM_IEEE80211_HW_FLAGS +@@ -2070,6 +2085,9 @@ enum ieee80211_hw_flags { + * size is smaller (an example is LinkSys WRT120N with FW v1.0.07 + * build 002 Jun 18 2012). + * ++ * @max_tx_fragments: maximum number of tx buffers per (A)-MSDU, sum ++ * of 1 + skb_shinfo(skb)->nr_frags for each skb in the frag_list. ++ * + * @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX + * (if %IEEE80211_HW_QUEUE_CONTROL is set) + * +@@ -2124,6 +2142,7 @@ struct ieee80211_hw { + u8 max_rate_tries; + u8 max_rx_aggregation_subframes; + u8 max_tx_aggregation_subframes; ++ u8 max_tx_fragments; + u8 offchannel_tx_hw_queue; + u8 radiotap_mcs_details; + u16 radiotap_vht_details; +--- a/net/mac80211/agg-tx.c ++++ b/net/mac80211/agg-tx.c +@@ -935,6 +935,7 @@ void ieee80211_process_addba_resp(struct + size_t len) + { + struct tid_ampdu_tx *tid_tx; ++ struct ieee80211_txq *txq; + u16 capab, tid; + u8 buf_size; + bool amsdu; +@@ -945,6 +946,10 @@ void ieee80211_process_addba_resp(struct + buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6; + buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes); + ++ txq = sta->sta.txq[tid]; ++ if (!amsdu && txq) ++ set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags); ++ + mutex_lock(&sta->ampdu_mlme.mtx); + + tid_tx = rcu_dereference_protected_tid_tx(sta, tid); +--- a/net/mac80211/debugfs.c ++++ b/net/mac80211/debugfs.c +@@ -127,6 +127,8 @@ static const char *hw_flag_names[NUM_IEE + FLAG(BEACON_TX_STATUS), + FLAG(NEEDS_UNIQUE_STA_ADDR), + FLAG(SUPPORTS_REORDERING_BUFFER), ++ FLAG(TX_AMSDU), ++ FLAG(TX_FRAG_LIST), + + /* keep last for the build bug below */ + (void *)0x1 +--- a/net/mac80211/ieee80211_i.h ++++ b/net/mac80211/ieee80211_i.h +@@ -799,6 +799,7 @@ struct mac80211_qos_map { + enum txq_info_flags { + IEEE80211_TXQ_STOP, + IEEE80211_TXQ_AMPDU, ++ IEEE80211_TXQ_NO_AMSDU, + }; + + struct txq_info { +--- a/net/mac80211/tx.c ++++ b/net/mac80211/tx.c +@@ -1318,6 +1318,10 @@ struct sk_buff *ieee80211_tx_dequeue(str + out: + spin_unlock_bh(&txqi->queue.lock); + ++ if (skb && skb_has_frag_list(skb) && ++ !ieee80211_hw_check(&local->hw, TX_FRAG_LIST)) ++ skb_linearize(skb); ++ + return skb; + } + EXPORT_SYMBOL(ieee80211_tx_dequeue); +@@ -2757,6 +2761,163 @@ void ieee80211_clear_fast_xmit(struct st + kfree_rcu(fast_tx, rcu_head); + } + ++static bool ieee80211_amsdu_realloc_pad(struct ieee80211_local *local, ++ struct sk_buff *skb, int headroom, ++ int *subframe_len) ++{ ++ int amsdu_len = *subframe_len + sizeof(struct ethhdr); ++ int padding = (4 - amsdu_len) & 3; ++ ++ if (skb_headroom(skb) < headroom || skb_tailroom(skb) < padding) { ++ I802_DEBUG_INC(local->tx_expand_skb_head); ++ ++ if (pskb_expand_head(skb, headroom, padding, GFP_ATOMIC)) { ++ wiphy_debug(local->hw.wiphy, ++ "failed to reallocate TX buffer\n"); ++ return false; ++ } ++ } ++ ++ if (padding) { ++ *subframe_len += padding; ++ memset(skb_put(skb, padding), 0, padding); ++ } ++ ++ return true; ++} ++ ++static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata, ++ struct ieee80211_fast_tx *fast_tx, ++ struct sk_buff *skb) ++{ ++ struct ieee80211_local *local = sdata->local; ++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); ++ struct ieee80211_hdr *hdr; ++ struct ethhdr amsdu_hdr; ++ int hdr_len = fast_tx->hdr_len - sizeof(rfc1042_header); ++ int subframe_len = skb->len - hdr_len; ++ void *data; ++ u8 *qc; ++ ++ if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) ++ return false; ++ ++ if (info->control.flags & IEEE80211_TX_CTRL_AMSDU) ++ return true; ++ ++ if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(amsdu_hdr), ++ &subframe_len)) ++ return false; ++ ++ amsdu_hdr.h_proto = cpu_to_be16(subframe_len); ++ memcpy(amsdu_hdr.h_source, skb->data + fast_tx->sa_offs, ETH_ALEN); ++ memcpy(amsdu_hdr.h_dest, skb->data + fast_tx->da_offs, ETH_ALEN); ++ ++ data = skb_push(skb, sizeof(amsdu_hdr)); ++ memmove(data, data + sizeof(amsdu_hdr), hdr_len); ++ memcpy(data + hdr_len, &amsdu_hdr, sizeof(amsdu_hdr)); ++ ++ hdr = data; ++ qc = ieee80211_get_qos_ctl(hdr); ++ *qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT; ++ ++ info->control.flags |= IEEE80211_TX_CTRL_AMSDU; ++ ++ return true; ++} ++ ++static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, ++ struct sta_info *sta, ++ struct ieee80211_fast_tx *fast_tx, ++ struct sk_buff *skb) ++{ ++ struct ieee80211_local *local = sdata->local; ++ u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; ++ struct ieee80211_txq *txq = sta->sta.txq[tid]; ++ struct txq_info *txqi; ++ struct sk_buff **frag_tail, *head; ++ int subframe_len = skb->len - ETH_ALEN; ++ u8 max_subframes = sta->sta.max_amsdu_subframes; ++ int max_frags = local->hw.max_tx_fragments; ++ int max_amsdu_len = sta->sta.max_amsdu_len; ++ __be16 len; ++ void *data; ++ bool ret = false; ++ int n = 1, nfrags; ++ ++ if (!ieee80211_hw_check(&local->hw, TX_AMSDU)) ++ return false; ++ ++ if (!txq) ++ return false; ++ ++ txqi = to_txq_info(txq); ++ if (test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags)) ++ return false; ++ ++ if (sta->sta.max_rc_amsdu_len) ++ max_amsdu_len = min_t(int, max_amsdu_len, ++ sta->sta.max_rc_amsdu_len); ++ ++ spin_lock_bh(&txqi->queue.lock); ++ ++ head = skb_peek_tail(&txqi->queue); ++ if (!head) ++ goto out; ++ ++ if (skb->len + head->len > max_amsdu_len) ++ goto out; ++ ++ /* ++ * HT A-MPDU limits maximum MPDU size to 4095 bytes. Since aggregation ++ * sessions are started/stopped without txq flush, use the limit here ++ * to avoid having to de-aggregate later. ++ */ ++ if (skb->len + head->len > 4095 && ++ !sta->sta.vht_cap.vht_supported) ++ goto out; ++ ++ if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) ++ goto out; ++ ++ nfrags = 1 + skb_shinfo(skb)->nr_frags; ++ nfrags += 1 + skb_shinfo(head)->nr_frags; ++ frag_tail = &skb_shinfo(head)->frag_list; ++ while (*frag_tail) { ++ nfrags += 1 + skb_shinfo(*frag_tail)->nr_frags; ++ frag_tail = &(*frag_tail)->next; ++ n++; ++ } ++ ++ if (max_subframes && n > max_subframes) ++ goto out; ++ ++ if (max_frags && nfrags > max_frags) ++ goto out; ++ ++ if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(rfc1042_header) + 2, ++ &subframe_len)) ++ return false; ++ ++ ret = true; ++ data = skb_push(skb, ETH_ALEN + 2); ++ memmove(data, data + ETH_ALEN + 2, 2 * ETH_ALEN); ++ ++ data += 2 * ETH_ALEN; ++ len = cpu_to_be16(subframe_len); ++ memcpy(data, &len, 2); ++ memcpy(data + 2, rfc1042_header, sizeof(rfc1042_header)); ++ ++ head->len += skb->len; ++ head->data_len += skb->len; ++ *frag_tail = skb; ++ ++out: ++ spin_unlock_bh(&txqi->queue.lock); ++ ++ return ret; ++} ++ + static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, + struct net_device *dev, struct sta_info *sta, + struct ieee80211_fast_tx *fast_tx, +@@ -2811,6 +2972,10 @@ static bool ieee80211_xmit_fast(struct i + + ieee80211_tx_stats(dev, skb->len + extra_head); + ++ if ((hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) && ++ ieee80211_amsdu_aggregate(sdata, sta, fast_tx, skb)) ++ return true; ++ + /* will not be crypto-handled beyond what we do here, so use false + * as the may-encrypt argument for the resize to not account for + * more room than we already have in 'extra_head' diff --git a/package/kernel/mac80211/patches/863-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch b/package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch index d6b9e37ac1..9277b2cabc 100644 --- a/package/kernel/mac80211/patches/863-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch +++ b/package/kernel/mac80211/patches/323-0000-brcmfmac-fix-setting-primary-channel-for-80-MHz-widt.patch @@ -1,5 +1,5 @@ From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 20 Jan 2016 16:35:12 +0100 +Date: Wed, 20 Jan 2016 16:46:04 +0100 Subject: [PATCH] brcmfmac: fix setting primary channel for 80 MHz width MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 @@ -14,13 +14,12 @@ offset in MHz against -2 or 2 which was resulting in picking a wrong primary channel. Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> --- - .../brcm80211/brcmfmac/cfg80211.c | 23 ++++++++++------------ - 1 file changed, 10 insertions(+), 13 deletions(-) ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -246,7 +246,7 @@ static u16 chandef_to_chanspec(struct br +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -247,7 +247,7 @@ static u16 chandef_to_chanspec(struct br brcmf_dbg(TRACE, "chandef: control %d center %d width %d\n", ch->chan->center_freq, ch->center_freq1, ch->width); ch_inf.chnum = ieee80211_frequency_to_channel(ch->center_freq1); @@ -29,7 +28,7 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> switch (ch->width) { case NL80211_CHAN_WIDTH_20: case NL80211_CHAN_WIDTH_20_NOHT: -@@ -255,24 +255,21 @@ static u16 chandef_to_chanspec(struct br +@@ -256,24 +256,21 @@ static u16 chandef_to_chanspec(struct br break; case NL80211_CHAN_WIDTH_40: ch_inf.bw = BRCMU_CHAN_BW_40; diff --git a/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch b/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch new file mode 100644 index 0000000000..d7018dab3d --- /dev/null +++ b/package/kernel/mac80211/patches/323-0001-brcmfmac-analyze-descriptors-of-current-component-on.patch @@ -0,0 +1,51 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Tue, 26 Jan 2016 17:57:01 +0100 +Subject: [PATCH] brcmfmac: analyze descriptors of current component only +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +So far we were looking for address descriptors without a check for +crossing current component border. In case of dealing with unsupported +descriptor or descriptor missing at all the code would incorrectly get +data from another component. + +Consider this binary-described component from BCM4366 EROM: +4bf83b01 TAG==CI CID==0x83b +20080201 TAG==CI PORTS==0+1 WRAPPERS==0+1 +18400035 TAG==ADDR SZ_SZD TYPE_SLAVE +00050000 +18107085 TAG==ADDR SZ_4K TYPE_SWRAP + +Driver was assigning invalid base address to this core: +brcmfmac: [6 ] core 0x83b:32 base 0x18109000 wrap 0x18107000 +which came from totally different component defined in EROM: +43b36701 TAG==CI CID==0x367 +00000201 TAG==CI PORTS==0+1 WRAPPERS==0+0 +18109005 TAG==ADDR SZ_4K TYPE_SLAVE + +This change will also allow us to support components without wrapper +address in the future. + +Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c +@@ -803,7 +803,14 @@ static int brcmf_chip_dmp_get_regaddr(st + *eromaddr -= 4; + return -EFAULT; + } +- } while (desc != DMP_DESC_ADDRESS); ++ } while (desc != DMP_DESC_ADDRESS && ++ desc != DMP_DESC_COMPONENT); ++ ++ /* stop if we crossed current component border */ ++ if (desc == DMP_DESC_COMPONENT) { ++ *eromaddr -= 4; ++ return 0; ++ } + + /* skip upper 32-bit address descriptor */ + if (val & DMP_DESC_ADDRSIZE_GT32) diff --git a/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch b/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch new file mode 100644 index 0000000000..045ab4953b --- /dev/null +++ b/package/kernel/mac80211/patches/323-0002-brcmfmac-allow-storing-PMU-core-without-wrapper-addr.patch @@ -0,0 +1,28 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Tue, 26 Jan 2016 17:57:02 +0100 +Subject: [PATCH] brcmfmac: allow storing PMU core without wrapper address +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Separated PMU core can be found in new devices and should be used for +accessing PMU registers (which were routed through ChipCommon so far). +This core is one of exceptions that doesn't have or need wrapper address +to be still safely accessible. + +Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c +@@ -883,7 +883,8 @@ int brcmf_chip_dmp_erom_scan(struct brcm + rev = (val & DMP_COMP_REVISION) >> DMP_COMP_REVISION_S; + + /* need core with ports */ +- if (nmw + nsw == 0) ++ if (nmw + nsw == 0 && ++ id != BCMA_CORE_PMU) + continue; + + /* try to obtain register address info */ diff --git a/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch b/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch new file mode 100644 index 0000000000..7b7ba4f743 --- /dev/null +++ b/package/kernel/mac80211/patches/323-0003-brcmfmac-read-extended-capabilities-of-ChipCommon-co.patch @@ -0,0 +1,43 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Tue, 26 Jan 2016 17:57:03 +0100 +Subject: [PATCH] brcmfmac: read extended capabilities of ChipCommon core +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is an extra bitfield with info about some present hardware. + +Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c +@@ -1025,6 +1025,9 @@ static int brcmf_chip_setup(struct brcmf + /* get chipcommon capabilites */ + pub->cc_caps = chip->ops->read32(chip->ctx, + CORE_CC_REG(base, capabilities)); ++ pub->cc_caps_ext = chip->ops->read32(chip->ctx, ++ CORE_CC_REG(base, ++ capabilities_ext)); + + /* get pmu caps & rev */ + if (pub->cc_caps & CC_CAP_PMU) { +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h +@@ -27,6 +27,7 @@ + * @chip: chip identifier. + * @chiprev: chip revision. + * @cc_caps: chipcommon core capabilities. ++ * @cc_caps_ext: chipcommon core extended capabilities. + * @pmucaps: PMU capabilities. + * @pmurev: PMU revision. + * @rambase: RAM base address (only applicable for ARM CR4 chips). +@@ -38,6 +39,7 @@ struct brcmf_chip { + u32 chip; + u32 chiprev; + u32 cc_caps; ++ u32 cc_caps_ext; + u32 pmucaps; + u32 pmurev; + u32 rambase; diff --git a/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch b/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch new file mode 100644 index 0000000000..2af6fd93bc --- /dev/null +++ b/package/kernel/mac80211/patches/323-0004-brcmfmac-access-PMU-registers-using-standalone-PMU-c.patch @@ -0,0 +1,148 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Tue, 26 Jan 2016 17:57:04 +0100 +Subject: [PATCH] brcmfmac: access PMU registers using standalone PMU core if + available +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +On recent Broadcom chipsets PMU is present as separated core and it +can't be accessed using ChipCommon anymore as it fails with e.g.: +[ 18.198412] Unhandled fault: imprecise external abort (0x1406) at 0xb6da200f + +Add a new helper function that will return a proper core that should be +used for accessing PMU registers. + +Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c +@@ -1014,6 +1014,7 @@ static int brcmf_chip_setup(struct brcmf + { + struct brcmf_chip *pub; + struct brcmf_core_priv *cc; ++ struct brcmf_core *pmu; + u32 base; + u32 val; + int ret = 0; +@@ -1030,9 +1031,10 @@ static int brcmf_chip_setup(struct brcmf + capabilities_ext)); + + /* get pmu caps & rev */ ++ pmu = brcmf_chip_get_pmu(pub); /* after reading cc_caps_ext */ + if (pub->cc_caps & CC_CAP_PMU) { + val = chip->ops->read32(chip->ctx, +- CORE_CC_REG(base, pmucapabilities)); ++ CORE_CC_REG(pmu->base, pmucapabilities)); + pub->pmurev = val & PCAP_REV_MASK; + pub->pmucaps = val; + } +@@ -1131,6 +1133,23 @@ struct brcmf_core *brcmf_chip_get_chipco + return &cc->pub; + } + ++struct brcmf_core *brcmf_chip_get_pmu(struct brcmf_chip *pub) ++{ ++ struct brcmf_core *cc = brcmf_chip_get_chipcommon(pub); ++ struct brcmf_core *pmu; ++ ++ /* See if there is separated PMU core available */ ++ if (cc->rev >= 35 && ++ pub->cc_caps_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) { ++ pmu = brcmf_chip_get_core(pub, BCMA_CORE_PMU); ++ if (pmu) ++ return pmu; ++ } ++ ++ /* Fallback to ChipCommon core for older hardware */ ++ return cc; ++} ++ + bool brcmf_chip_iscoreup(struct brcmf_core *pub) + { + struct brcmf_core_priv *core; +@@ -1301,6 +1320,7 @@ bool brcmf_chip_sr_capable(struct brcmf_ + { + u32 base, addr, reg, pmu_cc3_mask = ~0; + struct brcmf_chip_priv *chip; ++ struct brcmf_core *pmu = brcmf_chip_get_pmu(pub); + + brcmf_dbg(TRACE, "Enter\n"); + +@@ -1320,9 +1340,9 @@ bool brcmf_chip_sr_capable(struct brcmf_ + case BRCM_CC_4335_CHIP_ID: + case BRCM_CC_4339_CHIP_ID: + /* read PMU chipcontrol register 3 */ +- addr = CORE_CC_REG(base, chipcontrol_addr); ++ addr = CORE_CC_REG(pmu->base, chipcontrol_addr); + chip->ops->write32(chip->ctx, addr, 3); +- addr = CORE_CC_REG(base, chipcontrol_data); ++ addr = CORE_CC_REG(pmu->base, chipcontrol_data); + reg = chip->ops->read32(chip->ctx, addr); + return (reg & pmu_cc3_mask) != 0; + case BRCM_CC_43430_CHIP_ID: +@@ -1330,12 +1350,12 @@ bool brcmf_chip_sr_capable(struct brcmf_ + reg = chip->ops->read32(chip->ctx, addr); + return reg != 0; + default: +- addr = CORE_CC_REG(base, pmucapabilities_ext); ++ addr = CORE_CC_REG(pmu->base, pmucapabilities_ext); + reg = chip->ops->read32(chip->ctx, addr); + if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0) + return false; + +- addr = CORE_CC_REG(base, retention_ctl); ++ addr = CORE_CC_REG(pmu->base, retention_ctl); + reg = chip->ops->read32(chip->ctx, addr); + return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK | + PMU_RCTL_LOGIC_DISABLE_MASK)) == 0; +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.h +@@ -85,6 +85,7 @@ struct brcmf_chip *brcmf_chip_attach(voi + void brcmf_chip_detach(struct brcmf_chip *chip); + struct brcmf_core *brcmf_chip_get_core(struct brcmf_chip *chip, u16 coreid); + struct brcmf_core *brcmf_chip_get_chipcommon(struct brcmf_chip *chip); ++struct brcmf_core *brcmf_chip_get_pmu(struct brcmf_chip *pub); + bool brcmf_chip_iscoreup(struct brcmf_core *core); + void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset); + void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset, +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -3615,7 +3615,6 @@ brcmf_sdio_drivestrengthinit(struct brcm + const struct sdiod_drive_str *str_tab = NULL; + u32 str_mask; + u32 str_shift; +- u32 base; + u32 i; + u32 drivestrength_sel = 0; + u32 cc_data_temp; +@@ -3658,14 +3657,15 @@ brcmf_sdio_drivestrengthinit(struct brcm + } + + if (str_tab != NULL) { ++ struct brcmf_core *pmu = brcmf_chip_get_pmu(ci); ++ + for (i = 0; str_tab[i].strength != 0; i++) { + if (drivestrength >= str_tab[i].strength) { + drivestrength_sel = str_tab[i].sel; + break; + } + } +- base = brcmf_chip_get_chipcommon(ci)->base; +- addr = CORE_CC_REG(base, chipcontrol_addr); ++ addr = CORE_CC_REG(pmu->base, chipcontrol_addr); + brcmf_sdiod_regwl(sdiodev, addr, 1, NULL); + cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL); + cc_data_temp &= ~str_mask; +@@ -3835,8 +3835,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi + goto fail; + + /* set PMUControl so a backplane reset does PMU state reload */ +- reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base, +- pmucontrol); ++ reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol); + reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err); + if (err) + goto fail; diff --git a/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch b/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch new file mode 100644 index 0000000000..35887fcb59 --- /dev/null +++ b/package/kernel/mac80211/patches/323-0005-brcmfmac-add-support-for-14e4-4365-PCI-ID-with-BCM43.patch @@ -0,0 +1,38 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Tue, 26 Jan 2016 17:57:05 +0100 +Subject: [PATCH] brcmfmac: add support for 14e4:4365 PCI ID with BCM4366 + chipset +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +On Broadcom ARM routers BCM4366 cards are available with 14e4:4365 ID. +Unfortunately this ID was already used by Broadcom for cards with +BCM43142, a totally different chipset requiring SoftMAC driver. To avoid +a conflict between brcmfmac and bcma use more specific ID entry with +subvendor and subdevice specified. + +Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +@@ -1951,6 +1951,9 @@ static const struct dev_pm_ops brcmf_pci + + #define BRCMF_PCIE_DEVICE(dev_id) { BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\ + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 } ++#define BRCMF_PCIE_DEVICE_SUB(dev_id, subvend, subdev) { \ ++ BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\ ++ subvend, subdev, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 } + + static struct pci_device_id brcmf_pcie_devid_table[] = { + BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID), +@@ -1966,6 +1969,7 @@ static struct pci_device_id brcmf_pcie_d + BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_DEVICE_ID), + BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_2G_DEVICE_ID), + BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_5G_DEVICE_ID), ++ BRCMF_PCIE_DEVICE_SUB(0x4365, BRCM_PCIE_VENDOR_ID_BROADCOM, 0x4365), + BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_DEVICE_ID), + BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_2G_DEVICE_ID), + BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_5G_DEVICE_ID), diff --git a/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch b/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch deleted file mode 100644 index 246bb9d295..0000000000 --- a/package/kernel/mac80211/patches/323-ath9k-add-multi_read-to-be-compatible-with-ath9k_htc.patch +++ /dev/null @@ -1,35 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:50 +0100 -Subject: [PATCH] ath9k: add multi_read to be compatible with ath9k_htc - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -141,6 +141,16 @@ static unsigned int ath9k_ioread32(void - return val; - } - -+static void ath9k_multi_ioread32(void *hw_priv, u32 *addr, -+ u32 *val, u16 count) -+{ -+ int i; -+ -+ for (i = 0; i < count; i++) -+ val[i] = ath9k_ioread32(hw_priv, addr[i]); -+} -+ -+ - static unsigned int __ath9k_reg_rmw(struct ath_softc *sc, u32 reg_offset, - u32 set, u32 clr) - { -@@ -530,6 +540,7 @@ static int ath9k_init_softc(u16 devid, s - ah->hw = sc->hw; - ah->hw_version.devid = devid; - ah->reg_ops.read = ath9k_ioread32; -+ ah->reg_ops.multi_read = ath9k_multi_ioread32; - ah->reg_ops.write = ath9k_iowrite32; - ah->reg_ops.rmw = ath9k_reg_rmw; - pCap = &ah->caps; diff --git a/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch b/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch deleted file mode 100644 index 2eda1c9d25..0000000000 --- a/package/kernel/mac80211/patches/324-ath9k-add-new-function-ath9k_hw_read_array.patch +++ /dev/null @@ -1,69 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:51 +0100 -Subject: [PATCH] ath9k: add new function ath9k_hw_read_array - -REG_READ generate most overhead on usb bus. It send and read micro packages -and reduce usb bandwidth. To reduce this overhead we should read in batches. - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -121,6 +121,36 @@ void ath9k_hw_write_array(struct ath_hw - REGWRITE_BUFFER_FLUSH(ah); - } - -+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size) -+{ -+ u32 *tmp_reg_list, *tmp_data; -+ int i; -+ -+ tmp_reg_list = kmalloc(size * sizeof(u32), GFP_KERNEL); -+ if (!tmp_reg_list) { -+ dev_err(ah->dev, "%s: tmp_reg_list: alloc filed\n", __func__); -+ return; -+ } -+ -+ tmp_data = kmalloc(size * sizeof(u32), GFP_KERNEL); -+ if (!tmp_data) { -+ dev_err(ah->dev, "%s tmp_data: alloc filed\n", __func__); -+ goto error_tmp_data; -+ } -+ -+ for (i = 0; i < size; i++) -+ tmp_reg_list[i] = array[i][0]; -+ -+ REG_READ_MULTI(ah, tmp_reg_list, tmp_data, size); -+ -+ for (i = 0; i < size; i++) -+ array[i][1] = tmp_data[i]; -+ -+ kfree(tmp_data); -+error_tmp_data: -+ kfree(tmp_reg_list); -+} -+ - u32 ath9k_hw_reverse_bits(u32 val, u32 n) - { - u32 retval; ---- a/drivers/net/wireless/ath/ath9k/hw.h -+++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -138,6 +138,8 @@ - - #define REG_WRITE_ARRAY(iniarray, column, regWr) \ - ath9k_hw_write_array(ah, iniarray, column, &(regWr)) -+#define REG_READ_ARRAY(ah, array, size) \ -+ ath9k_hw_read_array(ah, array, size) - - #define AR_GPIO_OUTPUT_MUX_AS_OUTPUT 0 - #define AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED 1 -@@ -1020,6 +1022,7 @@ void ath9k_hw_synth_delay(struct ath_hw - bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout); - void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array, - int column, unsigned int *writecnt); -+void ath9k_hw_read_array(struct ath_hw *ah, u32 array[][2], int size); - u32 ath9k_hw_reverse_bits(u32 val, u32 n); - u16 ath9k_hw_computetxtime(struct ath_hw *ah, - u8 phy, int kbps, diff --git a/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch b/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch new file mode 100644 index 0000000000..6ce60f1960 --- /dev/null +++ b/package/kernel/mac80211/patches/324-brcmfmac-treat-NULL-character-in-NVRAM-as-separator.patch @@ -0,0 +1,32 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Sun, 31 Jan 2016 12:14:34 +0100 +Subject: [PATCH] brcmfmac: treat NULL character in NVRAM as separator +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Platform NVRAM (stored on a flash partition) has entries separated by a +NULL (\0) char. Our parsing code switches from VALUE state to IDLE +whenever it meets a NULL (\0). When that happens our IDLE handler should +simply consume it and analyze whatever is placed ahead. + +This fixes harmless warnings spamming debugging output: +[ 155.165624] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=20: ignoring invalid character +[ 155.180806] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=44: ignoring invalid character +[ 155.195971] brcmfmac: brcmf_nvram_handle_idle warning: ln=1:col=63: ignoring invalid character + +Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +@@ -93,7 +93,7 @@ static enum nvram_parser_state brcmf_nvr + c = nvp->data[nvp->pos]; + if (c == '\n') + return COMMENT; +- if (is_whitespace(c)) ++ if (is_whitespace(c) || c == '\0') + goto proceed; + if (c == '#') + return COMMENT; diff --git a/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch b/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch deleted file mode 100644 index 4e4888fd07..0000000000 --- a/package/kernel/mac80211/patches/325-ath9k-ar9271_hw_pa_cal-use-REG_READ_ARRAY.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:52 +0100 -Subject: [PATCH] ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY - -insted of reading each register separatly -and waste 4ms on each operation, we can -use one shot read. - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c -@@ -440,8 +440,7 @@ static void ar9271_hw_pa_cal(struct ath_ - { AR9285_AN_RF2G3, 0 }, - }; - -- for (i = 0; i < ARRAY_SIZE(regList); i++) -- regList[i][1] = REG_READ(ah, regList[i][0]); -+ REG_READ_ARRAY(ah, regList, ARRAY_SIZE(regList)); - - ENABLE_REG_RMW_BUFFER(ah); - /* 7834, b1=0 */ diff --git a/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch b/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch new file mode 100644 index 0000000000..012dea1e3a --- /dev/null +++ b/package/kernel/mac80211/patches/325-brcmfmac-sdio-Increase-the-default-timeouts-a-bit.patch @@ -0,0 +1,41 @@ +From: Sjoerd Simons <sjoerd.simons@collabora.co.uk> +Date: Mon, 25 Jan 2016 11:47:29 +0100 +Subject: [PATCH] brcmfmac: sdio: Increase the default timeouts a bit + +On a Radxa Rock2 board with a Ampak AP6335 (Broadcom 4339 core) it seems +the card responds very quickly most of the time, unfortunately during +initialisation it sometimes seems to take just a bit over 2 seconds to +respond. + +This results intialization failing with message like: + brcmf_c_preinit_dcmds: Retreiving cur_etheraddr failed, -52 + brcmf_bus_start: failed: -52 + brcmf_sdio_firmware_callback: dongle is not responding + +Increasing the timeout to allow for a bit more headroom allows the +card to initialize reliably. + +A quick search online after diagnosing/fixing this showed that Google +has a similar patch in their ChromeOS tree, so this doesn't seem +specific to the board I'm using. + +Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> +Reviewed-by: Julian Calaby <julian.calaby@gmail.com> +Acked-by: Arend van Spriel <arend@broadcom.com> +Reviewed-by: Douglas Anderson <dianders@chromium.org> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -45,8 +45,8 @@ + #include "chip.h" + #include "firmware.h" + +-#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2000) +-#define CTL_DONE_TIMEOUT msecs_to_jiffies(2000) ++#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) ++#define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) + + #ifdef DEBUG + diff --git a/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch b/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch new file mode 100644 index 0000000000..71f7a40433 --- /dev/null +++ b/package/kernel/mac80211/patches/326-ath9k-make-NF-load-complete-quickly-and-reliably.patch @@ -0,0 +1,87 @@ +From: Miaoqing Pan <miaoqing@codeaurora.org> +Date: Fri, 5 Feb 2016 09:45:50 +0800 +Subject: [PATCH] ath9k: make NF load complete quickly and reliably + +Make NF load complete quickly and reliably. NF load execution +is delayed by HW to end of frame if frame Rx or Tx is ongoing. +Increasing timeout to max frame duration. If NF cal is ongoing +before NF load, stop it before load, and restart it afterwards. + +Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> +--- + +--- a/drivers/net/wireless/ath/ath9k/calib.c ++++ b/drivers/net/wireless/ath/ath9k/calib.c +@@ -241,6 +241,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s + u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; + struct ath_common *common = ath9k_hw_common(ah); + s16 default_nf = ath9k_hw_get_default_nf(ah, chan); ++ u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL); + + if (ah->caldata) + h = ah->caldata->nfCalHist; +@@ -264,6 +265,16 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s + } + + /* ++ * stop NF cal if ongoing to ensure NF load completes immediately ++ * (or after end rx/tx frame if ongoing) ++ */ ++ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { ++ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); ++ REG_RMW_BUFFER_FLUSH(ah); ++ ENABLE_REG_RMW_BUFFER(ah); ++ } ++ ++ /* + * Load software filtered NF value into baseband internal minCCApwr + * variable. + */ +@@ -276,18 +287,33 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s + + /* + * Wait for load to complete, should be fast, a few 10s of us. +- * The max delay was changed from an original 250us to 10000us +- * since 250us often results in NF load timeout and causes deaf +- * condition during stress testing 12/12/2009 ++ * The max delay was changed from an original 250us to 22.2 msec. ++ * This would increase timeout to the longest possible frame ++ * (11n max length 22.1 msec) + */ +- for (j = 0; j < 10000; j++) { ++ for (j = 0; j < 22200; j++) { + if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & +- AR_PHY_AGC_CONTROL_NF) == 0) ++ AR_PHY_AGC_CONTROL_NF) == 0) + break; + udelay(10); + } + + /* ++ * Restart NF so it can continue. ++ */ ++ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { ++ ENABLE_REG_RMW_BUFFER(ah); ++ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF) ++ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, ++ AR_PHY_AGC_CONTROL_ENABLE_NF); ++ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF) ++ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, ++ AR_PHY_AGC_CONTROL_NO_UPDATE_NF); ++ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); ++ REG_RMW_BUFFER_FLUSH(ah); ++ } ++ ++ /* + * We timed out waiting for the noisefloor to load, probably due to an + * in-progress rx. Simply return here and allow the load plenty of time + * to complete before the next calibration interval. We need to avoid +@@ -296,7 +322,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s + * here, the baseband nf cal will just be capped by our present + * noisefloor until the next calibration timer. + */ +- if (j == 10000) { ++ if (j == 22200) { + ath_dbg(common, ANY, + "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n", + REG_READ(ah, AR_PHY_AGC_CONTROL)); diff --git a/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch b/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch deleted file mode 100644 index a22cd1d490..0000000000 --- a/package/kernel/mac80211/patches/326-ath9k-use-one-shot-read-in-ath9k_hw_update_mibstats.patch +++ /dev/null @@ -1,39 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:53 +0100 -Subject: [PATCH] ath9k: use one shot read in ath9k_hw_update_mibstats - -this will reduce some overhead on usb bus. - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/ani.c -+++ b/drivers/net/wireless/ath/ath9k/ani.c -@@ -107,11 +107,21 @@ static const struct ani_cck_level_entry - static void ath9k_hw_update_mibstats(struct ath_hw *ah, - struct ath9k_mib_stats *stats) - { -- stats->ackrcv_bad += REG_READ(ah, AR_ACK_FAIL); -- stats->rts_bad += REG_READ(ah, AR_RTS_FAIL); -- stats->fcs_bad += REG_READ(ah, AR_FCS_FAIL); -- stats->rts_good += REG_READ(ah, AR_RTS_OK); -- stats->beacons += REG_READ(ah, AR_BEACON_CNT); -+ u32 addr[5] = {AR_RTS_OK, AR_RTS_FAIL, AR_ACK_FAIL, -+ AR_FCS_FAIL, AR_BEACON_CNT}; -+ u32 data[5]; -+ -+ REG_READ_MULTI(ah, &addr[0], &data[0], 5); -+ /* AR_RTS_OK */ -+ stats->rts_good += data[0]; -+ /* AR_RTS_FAIL */ -+ stats->rts_bad += data[1]; -+ /* AR_ACK_FAIL */ -+ stats->ackrcv_bad += data[2]; -+ /* AR_FCS_FAIL */ -+ stats->fcs_bad += data[3]; -+ /* AR_BEACON_CNT */ -+ stats->beacons += data[4]; - } - - static void ath9k_ani_restart(struct ath_hw *ah) diff --git a/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch b/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch deleted file mode 100644 index e5a362ffa6..0000000000 --- a/package/kernel/mac80211/patches/327-ath9k-ath9k_hw_loadnf-use-REG_RMW.patch +++ /dev/null @@ -1,71 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:54 +0100 -Subject: [PATCH] ath9k: ath9k_hw_loadnf: use REG_RMW - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/calib.c -+++ b/drivers/net/wireless/ath/ath9k/calib.c -@@ -238,7 +238,6 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - { - struct ath9k_nfcal_hist *h = NULL; - unsigned i, j; -- int32_t val; - u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; - struct ath_common *common = ath9k_hw_common(ah); - s16 default_nf = ath9k_hw_get_default_nf(ah, chan); -@@ -246,6 +245,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - if (ah->caldata) - h = ah->caldata->nfCalHist; - -+ ENABLE_REG_RMW_BUFFER(ah); - for (i = 0; i < NUM_NF_READINGS; i++) { - if (chainmask & (1 << i)) { - s16 nfval; -@@ -258,10 +258,8 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - else - nfval = default_nf; - -- val = REG_READ(ah, ah->nf_regs[i]); -- val &= 0xFFFFFE00; -- val |= (((u32) nfval << 1) & 0x1ff); -- REG_WRITE(ah, ah->nf_regs[i], val); -+ REG_RMW(ah, ah->nf_regs[i], -+ (((u32) nfval << 1) & 0x1ff), 0x1ff); - } - } - -@@ -274,6 +272,7 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, - AR_PHY_AGC_CONTROL_NO_UPDATE_NF); - REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); -+ REG_RMW_BUFFER_FLUSH(ah); - - /* - * Wait for load to complete, should be fast, a few 10s of us. -@@ -309,19 +308,17 @@ int ath9k_hw_loadnf(struct ath_hw *ah, s - * by the median we just loaded. This will be initial (and max) value - * of next noise floor calibration the baseband does. - */ -- ENABLE_REGWRITE_BUFFER(ah); -+ ENABLE_REG_RMW_BUFFER(ah); - for (i = 0; i < NUM_NF_READINGS; i++) { - if (chainmask & (1 << i)) { - if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan)) - continue; - -- val = REG_READ(ah, ah->nf_regs[i]); -- val &= 0xFFFFFE00; -- val |= (((u32) (-50) << 1) & 0x1ff); -- REG_WRITE(ah, ah->nf_regs[i], val); -+ REG_RMW(ah, ah->nf_regs[i], -+ (((u32) (-50) << 1) & 0x1ff), 0x1ff); - } - } -- REGWRITE_BUFFER_FLUSH(ah); -+ REG_RMW_BUFFER_FLUSH(ah); - - return 0; - } diff --git a/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch b/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch new file mode 100644 index 0000000000..f7f9df946a --- /dev/null +++ b/package/kernel/mac80211/patches/327-mac80211-Remove-MPP-table-entries-with-MPath.patch @@ -0,0 +1,54 @@ +From: Henning Rogge <hrogge@gmail.com> +Date: Wed, 3 Feb 2016 13:58:36 +0100 +Subject: [PATCH] mac80211: Remove MPP table entries with MPath + +Make the mesh_path_del() function remove all mpp table entries +that are proxied by the removed mesh path. + +Acked-by: Bob Copeland <me@bobcopeland.com> +Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> +Signed-off-by: Johannes Berg <johannes.berg@intel.com> +--- + +--- a/net/mac80211/mesh_pathtbl.c ++++ b/net/mac80211/mesh_pathtbl.c +@@ -835,6 +835,29 @@ void mesh_path_flush_by_nexthop(struct s + rcu_read_unlock(); + } + ++static void mpp_flush_by_proxy(struct ieee80211_sub_if_data *sdata, ++ const u8 *proxy) ++{ ++ struct mesh_table *tbl; ++ struct mesh_path *mpp; ++ struct mpath_node *node; ++ int i; ++ ++ rcu_read_lock(); ++ read_lock_bh(&pathtbl_resize_lock); ++ tbl = resize_dereference_mpp_paths(); ++ for_each_mesh_entry(tbl, node, i) { ++ mpp = node->mpath; ++ if (ether_addr_equal(mpp->mpp, proxy)) { ++ spin_lock(&tbl->hashwlock[i]); ++ __mesh_path_del(tbl, node); ++ spin_unlock(&tbl->hashwlock[i]); ++ } ++ } ++ read_unlock_bh(&pathtbl_resize_lock); ++ rcu_read_unlock(); ++} ++ + static void table_flush_by_iface(struct mesh_table *tbl, + struct ieee80211_sub_if_data *sdata) + { +@@ -892,6 +915,9 @@ int mesh_path_del(struct ieee80211_sub_i + int hash_idx; + int err = 0; + ++ /* flush relevant mpp entries first */ ++ mpp_flush_by_proxy(sdata, addr); ++ + read_lock_bh(&pathtbl_resize_lock); + tbl = resize_dereference_mesh_paths(); + hash_idx = mesh_table_hash(addr, sdata, tbl); diff --git a/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch b/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch deleted file mode 100644 index 01c801123e..0000000000 --- a/package/kernel/mac80211/patches/328-ath9k-write-buffer-related-optimisation-in-ar5008_hw.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:55 +0100 -Subject: [PATCH] ath9k: write buffer related optimisation in - ar5008_hw_set_channel_regs - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c -+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -681,12 +681,13 @@ static void ar5008_hw_set_channel_regs(s - phymode |= AR_PHY_FC_DYN2040_PRI_CH; - - } -+ ENABLE_REGWRITE_BUFFER(ah); - REG_WRITE(ah, AR_PHY_TURBO, phymode); - -+ /* This function do only REG_WRITE, so -+ * we can include it to REGWRITE_BUFFER. */ - ath9k_hw_set11nmac2040(ah, chan); - -- ENABLE_REGWRITE_BUFFER(ah); -- - REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S); - REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S); - diff --git a/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch b/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch new file mode 100644 index 0000000000..740993c9e0 --- /dev/null +++ b/package/kernel/mac80211/patches/328-mac80211-let-unused-MPP-table-entries-timeout.patch @@ -0,0 +1,104 @@ +From: Henning Rogge <hrogge@gmail.com> +Date: Wed, 3 Feb 2016 13:58:37 +0100 +Subject: [PATCH] mac80211: let unused MPP table entries timeout + +Remember the last time when a mpp table entry is used for +rx or tx and remove them after MESH_PATH_EXPIRE time. + +Acked-by: Bob Copeland <me@bobcopeland.com> +Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> +Signed-off-by: Johannes Berg <johannes.berg@intel.com> +--- + +--- a/net/mac80211/mesh_pathtbl.c ++++ b/net/mac80211/mesh_pathtbl.c +@@ -942,6 +942,46 @@ enddel: + } + + /** ++ * mpp_path_del - delete a mesh proxy path from the table ++ * ++ * @addr: addr address (ETH_ALEN length) ++ * @sdata: local subif ++ * ++ * Returns: 0 if successful ++ */ ++static int mpp_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) ++{ ++ struct mesh_table *tbl; ++ struct mesh_path *mpath; ++ struct mpath_node *node; ++ struct hlist_head *bucket; ++ int hash_idx; ++ int err = 0; ++ ++ read_lock_bh(&pathtbl_resize_lock); ++ tbl = resize_dereference_mpp_paths(); ++ hash_idx = mesh_table_hash(addr, sdata, tbl); ++ bucket = &tbl->hash_buckets[hash_idx]; ++ ++ spin_lock(&tbl->hashwlock[hash_idx]); ++ hlist_for_each_entry(node, bucket, list) { ++ mpath = node->mpath; ++ if (mpath->sdata == sdata && ++ ether_addr_equal(addr, mpath->dst)) { ++ __mesh_path_del(tbl, node); ++ goto enddel; ++ } ++ } ++ ++ err = -ENXIO; ++enddel: ++ mesh_paths_generation++; ++ spin_unlock(&tbl->hashwlock[hash_idx]); ++ read_unlock_bh(&pathtbl_resize_lock); ++ return err; ++} ++ ++/** + * mesh_path_tx_pending - sends pending frames in a mesh path queue + * + * @mpath: mesh path to activate +@@ -1157,6 +1197,17 @@ void mesh_path_expire(struct ieee80211_s + time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE)) + mesh_path_del(mpath->sdata, mpath->dst); + } ++ ++ tbl = rcu_dereference(mpp_paths); ++ for_each_mesh_entry(tbl, node, i) { ++ if (node->mpath->sdata != sdata) ++ continue; ++ mpath = node->mpath; ++ if ((!(mpath->flags & MESH_PATH_FIXED)) && ++ time_after(jiffies, mpath->exp_time + MESH_PATH_EXPIRE)) ++ mpp_path_del(mpath->sdata, mpath->dst); ++ } ++ + rcu_read_unlock(); + } + +--- a/net/mac80211/rx.c ++++ b/net/mac80211/rx.c +@@ -2291,6 +2291,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80 + spin_lock_bh(&mppath->state_lock); + if (!ether_addr_equal(mppath->mpp, mpp_addr)) + memcpy(mppath->mpp, mpp_addr, ETH_ALEN); ++ mppath->exp_time = jiffies; + spin_unlock_bh(&mppath->state_lock); + } + rcu_read_unlock(); +--- a/net/mac80211/tx.c ++++ b/net/mac80211/tx.c +@@ -2171,8 +2171,11 @@ static struct sk_buff *ieee80211_build_h + mpp_lookup = true; + } + +- if (mpp_lookup) ++ if (mpp_lookup) { + mppath = mpp_path_lookup(sdata, skb->data); ++ if (mppath) ++ mppath->exp_time = jiffies; ++ } + + if (mppath && mpath) + mesh_path_del(mpath->sdata, mpath->dst); diff --git a/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch b/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch deleted file mode 100644 index e5219f281b..0000000000 --- a/package/kernel/mac80211/patches/329-ath9k-ath9k_hw_set_4k_power_cal_tabl-use-rmw-buffer.patch +++ /dev/null @@ -1,26 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:56 +0100 -Subject: [PATCH] ath9k: ath9k_hw_set_4k_power_cal_tabl: use rmw buffer - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c -+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c -@@ -389,6 +389,7 @@ static void ath9k_hw_set_4k_power_cal_ta - } - } - -+ ENABLE_REG_RMW_BUFFER(ah); - REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN, - (numXpdGain - 1) & 0x3); - REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1, -@@ -396,6 +397,7 @@ static void ath9k_hw_set_4k_power_cal_ta - REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2, - xpdGainValues[1]); - REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3, 0); -+ REG_RMW_BUFFER_FLUSH(ah); - - for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) { - regChainOffset = i * 0x1000; diff --git a/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch b/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch new file mode 100644 index 0000000000..0c36b1d568 --- /dev/null +++ b/package/kernel/mac80211/patches/329-mac80211-Unify-mesh-and-mpp-path-removal-function.patch @@ -0,0 +1,143 @@ +From: Henning Rogge <hrogge@gmail.com> +Date: Wed, 3 Feb 2016 13:58:38 +0100 +Subject: [PATCH] mac80211: Unify mesh and mpp path removal function + +mpp_path_del() and mesh_path_del() are mostly the same function. +Move common code into a new static function. + +Acked-by: Bob Copeland <me@bobcopeland.com> +Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> +Signed-off-by: Johannes Berg <johannes.berg@intel.com> +--- + +--- a/net/mac80211/mesh_pathtbl.c ++++ b/net/mac80211/mesh_pathtbl.c +@@ -55,16 +55,21 @@ int mpp_paths_generation; + static DEFINE_RWLOCK(pathtbl_resize_lock); + + ++static inline struct mesh_table *resize_dereference_paths( ++ struct mesh_table __rcu *table) ++{ ++ return rcu_dereference_protected(table, ++ lockdep_is_held(&pathtbl_resize_lock)); ++} ++ + static inline struct mesh_table *resize_dereference_mesh_paths(void) + { +- return rcu_dereference_protected(mesh_paths, +- lockdep_is_held(&pathtbl_resize_lock)); ++ return resize_dereference_paths(mesh_paths); + } + + static inline struct mesh_table *resize_dereference_mpp_paths(void) + { +- return rcu_dereference_protected(mpp_paths, +- lockdep_is_held(&pathtbl_resize_lock)); ++ return resize_dereference_paths(mpp_paths); + } + + /* +@@ -899,14 +904,17 @@ void mesh_path_flush_by_iface(struct iee + } + + /** +- * mesh_path_del - delete a mesh path from the table ++ * table_path_del - delete a path from the mesh or mpp table + * +- * @addr: dst address (ETH_ALEN length) ++ * @tbl: mesh or mpp path table + * @sdata: local subif ++ * @addr: dst address (ETH_ALEN length) + * + * Returns: 0 if successful + */ +-int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) ++static int table_path_del(struct mesh_table __rcu *rcu_tbl, ++ struct ieee80211_sub_if_data *sdata, ++ const u8 *addr) + { + struct mesh_table *tbl; + struct mesh_path *mpath; +@@ -915,11 +923,7 @@ int mesh_path_del(struct ieee80211_sub_i + int hash_idx; + int err = 0; + +- /* flush relevant mpp entries first */ +- mpp_flush_by_proxy(sdata, addr); +- +- read_lock_bh(&pathtbl_resize_lock); +- tbl = resize_dereference_mesh_paths(); ++ tbl = resize_dereference_paths(rcu_tbl); + hash_idx = mesh_table_hash(addr, sdata, tbl); + bucket = &tbl->hash_buckets[hash_idx]; + +@@ -935,9 +939,30 @@ int mesh_path_del(struct ieee80211_sub_i + + err = -ENXIO; + enddel: +- mesh_paths_generation++; + spin_unlock(&tbl->hashwlock[hash_idx]); ++ return err; ++} ++ ++/** ++ * mesh_path_del - delete a mesh path from the table ++ * ++ * @addr: dst address (ETH_ALEN length) ++ * @sdata: local subif ++ * ++ * Returns: 0 if successful ++ */ ++int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) ++{ ++ int err = 0; ++ ++ /* flush relevant mpp entries first */ ++ mpp_flush_by_proxy(sdata, addr); ++ ++ read_lock_bh(&pathtbl_resize_lock); ++ err = table_path_del(mesh_paths, sdata, addr); ++ mesh_paths_generation++; + read_unlock_bh(&pathtbl_resize_lock); ++ + return err; + } + +@@ -951,33 +976,13 @@ enddel: + */ + static int mpp_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr) + { +- struct mesh_table *tbl; +- struct mesh_path *mpath; +- struct mpath_node *node; +- struct hlist_head *bucket; +- int hash_idx; + int err = 0; + + read_lock_bh(&pathtbl_resize_lock); +- tbl = resize_dereference_mpp_paths(); +- hash_idx = mesh_table_hash(addr, sdata, tbl); +- bucket = &tbl->hash_buckets[hash_idx]; +- +- spin_lock(&tbl->hashwlock[hash_idx]); +- hlist_for_each_entry(node, bucket, list) { +- mpath = node->mpath; +- if (mpath->sdata == sdata && +- ether_addr_equal(addr, mpath->dst)) { +- __mesh_path_del(tbl, node); +- goto enddel; +- } +- } +- +- err = -ENXIO; +-enddel: +- mesh_paths_generation++; +- spin_unlock(&tbl->hashwlock[hash_idx]); ++ err = table_path_del(mpp_paths, sdata, addr); ++ mpp_paths_generation++; + read_unlock_bh(&pathtbl_resize_lock); ++ + return err; + } + diff --git a/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch b/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch deleted file mode 100644 index 6ce3f40f05..0000000000 --- a/package/kernel/mac80211/patches/330-ath9k-use-rmw-buffer-in-ath9k_hw_set_operating_mode-.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:57 +0100 -Subject: [PATCH] ath9k: use rmw buffer in ath9k_hw_set_operating_mode - and ath9k_hw_reset - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -1227,6 +1227,7 @@ static void ath9k_hw_set_operating_mode( - u32 mask = AR_STA_ID1_STA_AP | AR_STA_ID1_ADHOC; - u32 set = AR_STA_ID1_KSRCH_MODE; - -+ ENABLE_REG_RMW_BUFFER(ah); - switch (opmode) { - case NL80211_IFTYPE_ADHOC: - if (!AR_SREV_9340_13(ah)) { -@@ -1248,6 +1249,7 @@ static void ath9k_hw_set_operating_mode( - break; - } - REG_RMW(ah, AR_STA_ID1, set, mask); -+ REG_RMW_BUFFER_FLUSH(ah); - } - - void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled, -@@ -1960,6 +1962,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st - if (!ath9k_hw_mci_is_enabled(ah)) - REG_WRITE(ah, AR_OBS, 8); - -+ ENABLE_REG_RMW_BUFFER(ah); - if (ah->config.rx_intr_mitigation) { - REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, ah->config.rimt_last); - REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, ah->config.rimt_first); -@@ -1969,6 +1972,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st - REG_RMW_FIELD(ah, AR_TIMT, AR_TIMT_LAST, 300); - REG_RMW_FIELD(ah, AR_TIMT, AR_TIMT_FIRST, 750); - } -+ REG_RMW_BUFFER_FLUSH(ah); - - ath9k_hw_init_bb(ah, chan); - diff --git a/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch b/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch new file mode 100644 index 0000000000..4dc6d663ed --- /dev/null +++ b/package/kernel/mac80211/patches/330-mac80211-minstrel-Change-expected-throughput-unit-ba.patch @@ -0,0 +1,51 @@ +From: Sven Eckelmann <sven.eckelmann@open-mesh.com> +Date: Tue, 2 Feb 2016 08:12:26 +0100 +Subject: [PATCH] mac80211: minstrel: Change expected throughput unit back to + Kbps + +The change from cur_tp to the function +minstrel_get_tp_avg/minstrel_ht_get_tp_avg changed the unit used for the +current throughput. For example in minstrel_ht the correct +conversion between them would be: + + mrs->cur_tp / 10 == minstrel_ht_get_tp_avg(..). + +This factor 10 must also be included in the calculation of +minstrel_get_expected_throughput and minstrel_ht_get_expected_throughput to +return values with the unit [Kbps] instead of [10Kbps]. Otherwise routing +algorithms like B.A.T.M.A.N. V will make incorrect decision based on these +values. Its kernel based implementation expects expected_throughput always +to have the unit [Kbps] and not sometimes [10Kbps] and sometimes [Kbps]. + +The same requirement has iw or olsrdv2's nl80211 based statistics module +which retrieve the same data via NL80211_STA_INFO_TX_BITRATE. + +Cc: stable@vger.kernel.org +Fixes: 6a27b2c40b48 ("mac80211: restructure per-rate throughput calculation into function") +Signed-off-by: Sven Eckelmann <sven@open-mesh.com> +Signed-off-by: Johannes Berg <johannes.berg@intel.com> +--- + +--- a/net/mac80211/rc80211_minstrel.c ++++ b/net/mac80211/rc80211_minstrel.c +@@ -711,7 +711,7 @@ static u32 minstrel_get_expected_through + * computing cur_tp + */ + tmp_mrs = &mi->r[idx].stats; +- tmp_cur_tp = minstrel_get_tp_avg(&mi->r[idx], tmp_mrs->prob_ewma); ++ tmp_cur_tp = minstrel_get_tp_avg(&mi->r[idx], tmp_mrs->prob_ewma) * 10; + tmp_cur_tp = tmp_cur_tp * 1200 * 8 / 1024; + + return tmp_cur_tp; +--- a/net/mac80211/rc80211_minstrel_ht.c ++++ b/net/mac80211/rc80211_minstrel_ht.c +@@ -1335,7 +1335,8 @@ static u32 minstrel_ht_get_expected_thro + prob = mi->groups[i].rates[j].prob_ewma; + + /* convert tp_avg from pkt per second in kbps */ +- tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * AVG_PKT_SIZE * 8 / 1024; ++ tp_avg = minstrel_ht_get_tp_avg(mi, i, j, prob) * 10; ++ tp_avg = tp_avg * AVG_PKT_SIZE * 8 / 1024; + + return tp_avg; + } diff --git a/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch b/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch deleted file mode 100644 index edd6160fa6..0000000000 --- a/package/kernel/mac80211/patches/331-ath9k-ath9k_hw_4k_set_board_values-use-rmw-buffer.patch +++ /dev/null @@ -1,26 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:58 +0100 -Subject: [PATCH] ath9k: ath9k_hw_4k_set_board_values: use rmw buffer - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c -+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c -@@ -1082,6 +1082,7 @@ static void ath9k_hw_4k_set_board_values - mask = BIT(0)|BIT(5)|BIT(10)|BIT(15)|BIT(20)|BIT(25); - pwrctrl = mask * bb_desired_scale; - clr = mask * 0x1f; -+ ENABLE_REG_RMW_BUFFER(ah); - REG_RMW(ah, AR_PHY_TX_PWRCTRL8, pwrctrl, clr); - REG_RMW(ah, AR_PHY_TX_PWRCTRL10, pwrctrl, clr); - REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL12, pwrctrl, clr); -@@ -1096,6 +1097,7 @@ static void ath9k_hw_4k_set_board_values - clr = mask * 0x1f; - REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL11, pwrctrl, clr); - REG_RMW(ah, AR_PHY_CH0_TX_PWRCTRL13, pwrctrl, clr); -+ REG_RMW_BUFFER_FLUSH(ah); - } - } - diff --git a/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch b/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch new file mode 100644 index 0000000000..1fd016f7f6 --- /dev/null +++ b/package/kernel/mac80211/patches/331-brcmfmac-Increase-nr-of-supported-flowrings.patch @@ -0,0 +1,307 @@ +From: Hante Meuleman <meuleman@broadcom.com> +Date: Sun, 7 Feb 2016 18:08:24 +0100 +Subject: [PATCH] brcmfmac: Increase nr of supported flowrings. +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +New generation devices have firmware which has more than 256 flowrings. +E.g. following debugging message comes from 14e4:4365 BCM4366: +[ 194.606245] brcmfmac: brcmf_pcie_init_ringbuffers Nr of flowrings is 264 + +At various code places (related to flowrings) we were using u8 which +could lead to storing wrong number or infinite loops when indexing with +this type. This issue was quite easy to spot in brcmf_flowring_detach +where it led to infinite loop e.g. on failed initialization. + +This patch switches code to proper types and increases the maximum +number of supported flowrings to 512. + +Originally this change was sent in September 2015, but back it was +causing a regression on BCM43602 resulting in: +Unable to handle kernel NULL pointer dereference at virtual address ... + +The reason for this regression was missing update (s/u8/u16) of struct +brcmf_flowring_ring. This problem was handled in 9f64df9 ("brcmfmac: Fix +bug in flowring management."). Starting with that it's safe to apply +this original patch as it doesn't cause a regression anymore. + +This patch fixes an infinite loop on BCM4366 which is supported since +4.4 so it makes sense to apply it to stable 4.4+. + +Cc: <stable@vger.kernel.org> # 4.4+ +Reviewed-by: Arend Van Spriel <arend@broadcom.com> +Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> +Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> +Signed-off-by: Hante Meuleman <meuleman@broadcom.com> +Signed-off-by: Arend van Spriel <arend@broadcom.com> +Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.c +@@ -32,7 +32,7 @@ + #define BRCMF_FLOWRING_LOW (BRCMF_FLOWRING_HIGH - 256) + #define BRCMF_FLOWRING_INVALID_IFIDX 0xff + +-#define BRCMF_FLOWRING_HASH_AP(da, fifo, ifidx) (da[5] + fifo + ifidx * 16) ++#define BRCMF_FLOWRING_HASH_AP(da, fifo, ifidx) (da[5] * 2 + fifo + ifidx * 16) + #define BRCMF_FLOWRING_HASH_STA(fifo, ifidx) (fifo + ifidx * 16) + + static const u8 brcmf_flowring_prio2fifo[] = { +@@ -68,7 +68,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f + u8 prio, u8 ifidx) + { + struct brcmf_flowring_hash *hash; +- u8 hash_idx; ++ u16 hash_idx; + u32 i; + bool found; + bool sta; +@@ -88,6 +88,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f + } + hash_idx = sta ? BRCMF_FLOWRING_HASH_STA(fifo, ifidx) : + BRCMF_FLOWRING_HASH_AP(mac, fifo, ifidx); ++ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1); + found = false; + hash = flow->hash; + for (i = 0; i < BRCMF_FLOWRING_HASHSIZE; i++) { +@@ -98,6 +99,7 @@ u32 brcmf_flowring_lookup(struct brcmf_f + break; + } + hash_idx++; ++ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1); + } + if (found) + return hash[hash_idx].flowid; +@@ -111,7 +113,7 @@ u32 brcmf_flowring_create(struct brcmf_f + { + struct brcmf_flowring_ring *ring; + struct brcmf_flowring_hash *hash; +- u8 hash_idx; ++ u16 hash_idx; + u32 i; + bool found; + u8 fifo; +@@ -131,6 +133,7 @@ u32 brcmf_flowring_create(struct brcmf_f + } + hash_idx = sta ? BRCMF_FLOWRING_HASH_STA(fifo, ifidx) : + BRCMF_FLOWRING_HASH_AP(mac, fifo, ifidx); ++ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1); + found = false; + hash = flow->hash; + for (i = 0; i < BRCMF_FLOWRING_HASHSIZE; i++) { +@@ -140,6 +143,7 @@ u32 brcmf_flowring_create(struct brcmf_f + break; + } + hash_idx++; ++ hash_idx &= (BRCMF_FLOWRING_HASHSIZE - 1); + } + if (found) { + for (i = 0; i < flow->nrofrings; i++) { +@@ -169,7 +173,7 @@ u32 brcmf_flowring_create(struct brcmf_f + } + + +-u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid) ++u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u16 flowid) + { + struct brcmf_flowring_ring *ring; + +@@ -179,7 +183,7 @@ u8 brcmf_flowring_tid(struct brcmf_flowr + } + + +-static void brcmf_flowring_block(struct brcmf_flowring *flow, u8 flowid, ++static void brcmf_flowring_block(struct brcmf_flowring *flow, u16 flowid, + bool blocked) + { + struct brcmf_flowring_ring *ring; +@@ -228,10 +232,10 @@ static void brcmf_flowring_block(struct + } + + +-void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid) ++void brcmf_flowring_delete(struct brcmf_flowring *flow, u16 flowid) + { + struct brcmf_flowring_ring *ring; +- u8 hash_idx; ++ u16 hash_idx; + struct sk_buff *skb; + + ring = flow->rings[flowid]; +@@ -253,7 +257,7 @@ void brcmf_flowring_delete(struct brcmf_ + } + + +-u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid, ++u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u16 flowid, + struct sk_buff *skb) + { + struct brcmf_flowring_ring *ring; +@@ -279,7 +283,7 @@ u32 brcmf_flowring_enqueue(struct brcmf_ + } + + +-struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid) ++struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u16 flowid) + { + struct brcmf_flowring_ring *ring; + struct sk_buff *skb; +@@ -300,7 +304,7 @@ struct sk_buff *brcmf_flowring_dequeue(s + } + + +-void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid, ++void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u16 flowid, + struct sk_buff *skb) + { + struct brcmf_flowring_ring *ring; +@@ -311,7 +315,7 @@ void brcmf_flowring_reinsert(struct brcm + } + + +-u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u8 flowid) ++u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u16 flowid) + { + struct brcmf_flowring_ring *ring; + +@@ -326,7 +330,7 @@ u32 brcmf_flowring_qlen(struct brcmf_flo + } + + +-void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid) ++void brcmf_flowring_open(struct brcmf_flowring *flow, u16 flowid) + { + struct brcmf_flowring_ring *ring; + +@@ -340,10 +344,10 @@ void brcmf_flowring_open(struct brcmf_fl + } + + +-u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u8 flowid) ++u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u16 flowid) + { + struct brcmf_flowring_ring *ring; +- u8 hash_idx; ++ u16 hash_idx; + + ring = flow->rings[flowid]; + hash_idx = ring->hash_id; +@@ -384,7 +388,7 @@ void brcmf_flowring_detach(struct brcmf_ + struct brcmf_pub *drvr = bus_if->drvr; + struct brcmf_flowring_tdls_entry *search; + struct brcmf_flowring_tdls_entry *remove; +- u8 flowid; ++ u16 flowid; + + for (flowid = 0; flowid < flow->nrofrings; flowid++) { + if (flow->rings[flowid]) +@@ -408,7 +412,7 @@ void brcmf_flowring_configure_addr_mode( + struct brcmf_bus *bus_if = dev_get_drvdata(flow->dev); + struct brcmf_pub *drvr = bus_if->drvr; + u32 i; +- u8 flowid; ++ u16 flowid; + + if (flow->addr_mode[ifidx] != addr_mode) { + for (i = 0; i < ARRAY_SIZE(flow->hash); i++) { +@@ -434,7 +438,7 @@ void brcmf_flowring_delete_peer(struct b + struct brcmf_flowring_tdls_entry *prev; + struct brcmf_flowring_tdls_entry *search; + u32 i; +- u8 flowid; ++ u16 flowid; + bool sta; + + sta = (flow->addr_mode[ifidx] == ADDR_INDIRECT); +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/flowring.h +@@ -16,7 +16,7 @@ + #define BRCMFMAC_FLOWRING_H + + +-#define BRCMF_FLOWRING_HASHSIZE 256 ++#define BRCMF_FLOWRING_HASHSIZE 512 /* has to be 2^x */ + #define BRCMF_FLOWRING_INVALID_ID 0xFFFFFFFF + + +@@ -24,7 +24,7 @@ struct brcmf_flowring_hash { + u8 mac[ETH_ALEN]; + u8 fifo; + u8 ifidx; +- u8 flowid; ++ u16 flowid; + }; + + enum ring_status { +@@ -61,16 +61,16 @@ u32 brcmf_flowring_lookup(struct brcmf_f + u8 prio, u8 ifidx); + u32 brcmf_flowring_create(struct brcmf_flowring *flow, u8 da[ETH_ALEN], + u8 prio, u8 ifidx); +-void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid); +-void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid); +-u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid); +-u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid, ++void brcmf_flowring_delete(struct brcmf_flowring *flow, u16 flowid); ++void brcmf_flowring_open(struct brcmf_flowring *flow, u16 flowid); ++u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u16 flowid); ++u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u16 flowid, + struct sk_buff *skb); +-struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid); +-void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid, ++struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u16 flowid); ++void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u16 flowid, + struct sk_buff *skb); +-u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u8 flowid); +-u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u8 flowid); ++u32 brcmf_flowring_qlen(struct brcmf_flowring *flow, u16 flowid); ++u8 brcmf_flowring_ifidx_get(struct brcmf_flowring *flow, u16 flowid); + struct brcmf_flowring *brcmf_flowring_attach(struct device *dev, u16 nrofrings); + void brcmf_flowring_detach(struct brcmf_flowring *flow); + void brcmf_flowring_configure_addr_mode(struct brcmf_flowring *flow, int ifidx, +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c +@@ -677,7 +677,7 @@ static u32 brcmf_msgbuf_flowring_create( + } + + +-static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u8 flowid) ++static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u16 flowid) + { + struct brcmf_flowring *flow = msgbuf->flow; + struct brcmf_commonring *commonring; +@@ -1310,7 +1310,7 @@ int brcmf_proto_msgbuf_rx_trigger(struct + } + + +-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid) ++void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid) + { + struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd; + struct msgbuf_tx_flowring_delete_req *delete; +@@ -1415,6 +1415,13 @@ int brcmf_proto_msgbuf_attach(struct brc + u32 count; + + if_msgbuf = drvr->bus_if->msgbuf; ++ ++ if (if_msgbuf->nrof_flowrings >= BRCMF_FLOWRING_HASHSIZE) { ++ brcmf_err("driver not configured for this many flowrings %d\n", ++ if_msgbuf->nrof_flowrings); ++ if_msgbuf->nrof_flowrings = BRCMF_FLOWRING_HASHSIZE - 1; ++ } ++ + msgbuf = kzalloc(sizeof(*msgbuf), GFP_KERNEL); + if (!msgbuf) + goto fail; +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.h +@@ -33,7 +33,7 @@ + + + int brcmf_proto_msgbuf_rx_trigger(struct device *dev); +-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid); ++void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u16 flowid); + int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr); + void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr); + #else diff --git a/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch b/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch deleted file mode 100644 index 3ce4428f56..0000000000 --- a/package/kernel/mac80211/patches/332-ath9k-ath9k_hw_analog_shift_rmw-use-REG_RMW.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:29:59 +0100 -Subject: [PATCH] ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW - -use REG_RMW in ath9k_hw_analog_shift_rmw. -It will double execution speed on usb bus. - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/eeprom.c -+++ b/drivers/net/wireless/ath/ath9k/eeprom.c -@@ -27,12 +27,7 @@ void ath9k_hw_analog_shift_regwrite(stru - void ath9k_hw_analog_shift_rmw(struct ath_hw *ah, u32 reg, u32 mask, - u32 shift, u32 val) - { -- u32 regVal; -- -- regVal = REG_READ(ah, reg) & ~mask; -- regVal |= (val << shift) & mask; -- -- REG_WRITE(ah, reg, regVal); -+ REG_RMW(ah, reg, ((val << shift) & mask), mask); - - if (ah->config.analog_shiftreg) - udelay(100); diff --git a/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch b/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch new file mode 100644 index 0000000000..e414f23784 --- /dev/null +++ b/package/kernel/mac80211/patches/332-cfg80211-fix-faulty-variable-initialization-in-ieee8.patch @@ -0,0 +1,22 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Mon, 8 Feb 2016 14:24:36 +0100 +Subject: [PATCH] cfg80211: fix faulty variable initialization in + ieee80211_amsdu_to_8023s + +reuse_skb is set to true if the code decides to use the last segment. +Fixes a memory leak + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/net/wireless/util.c ++++ b/net/wireless/util.c +@@ -676,7 +676,7 @@ void ieee80211_amsdu_to_8023s(struct sk_ + u8 *payload; + int offset = 0, remaining, err; + struct ethhdr eth; +- bool reuse_skb = true; ++ bool reuse_skb = false; + bool last = false; + + if (has_80211_header) { diff --git a/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch b/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch deleted file mode 100644 index 8f12b36454..0000000000 --- a/package/kernel/mac80211/patches/333-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_4k_set_.patch +++ /dev/null @@ -1,47 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:30:01 +0100 -Subject: [PATCH] ath9k: use REG_RMW and rmw buffer in - ath9k_hw_4k_set_gain - -it is possible to reduce time needed for this function -by rplacing REG_WRITE with REG_RMW (plus dummy 0) and putt all commands -in same buffer. - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c -+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c -@@ -772,15 +772,14 @@ static void ath9k_hw_4k_set_gain(struct - struct ar5416_eeprom_4k *eep, - u8 txRxAttenLocal) - { -- REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0, -- pModal->antCtrlChain[0]); -- -- REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), -- (REG_READ(ah, AR_PHY_TIMING_CTRL4(0)) & -- ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | -- AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) | -- SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) | -- SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF)); -+ ENABLE_REG_RMW_BUFFER(ah); -+ REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, -+ pModal->antCtrlChain[0], 0); -+ -+ REG_RMW(ah, AR_PHY_TIMING_CTRL4(0), -+ SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) | -+ SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF), -+ AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF); - - if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >= - AR5416_EEP_MINOR_VER_3) { -@@ -819,6 +818,7 @@ static void ath9k_hw_4k_set_gain(struct - AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal); - REG_RMW_FIELD(ah, AR_PHY_RXGAIN + 0x1000, - AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]); -+ REG_RMW_BUFFER_FLUSH(ah); - } - - /* diff --git a/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch b/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch new file mode 100644 index 0000000000..6e2d0cf5b0 --- /dev/null +++ b/package/kernel/mac80211/patches/333-cfg80211-reuse-existing-page-fragments-in-A-MSDU-rx.patch @@ -0,0 +1,132 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Mon, 8 Feb 2016 14:33:19 +0100 +Subject: [PATCH] cfg80211: reuse existing page fragments in A-MSDU rx + +This massively reduces data copying and thus improves rx performance + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/net/wireless/util.c ++++ b/net/wireless/util.c +@@ -644,23 +644,93 @@ int ieee80211_data_from_8023(struct sk_b + } + EXPORT_SYMBOL(ieee80211_data_from_8023); + ++static void ++__frame_add_frag(struct sk_buff *skb, struct page *page, ++ void *ptr, int len, int size) ++{ ++ struct skb_shared_info *sh = skb_shinfo(skb); ++ int page_offset; ++ ++ atomic_inc(&page->_count); ++ page_offset = ptr - page_address(page); ++ skb_add_rx_frag(skb, sh->nr_frags, page, page_offset, len, size); ++} ++ ++static void ++__ieee80211_amsdu_copy_frag(struct sk_buff *skb, struct sk_buff *frame, ++ int offset, int len) ++{ ++ struct skb_shared_info *sh = skb_shinfo(skb); ++ const skb_frag_t *frag = &sh->frags[-1]; ++ struct page *frag_page; ++ void *frag_ptr; ++ int frag_len, frag_size; ++ int head_size = skb->len - skb->data_len; ++ int cur_len; ++ ++ frag_page = virt_to_head_page(skb->head); ++ frag_ptr = skb->data; ++ frag_size = head_size; ++ ++ while (offset >= frag_size) { ++ offset -= frag_size; ++ frag++; ++ frag_page = skb_frag_page(frag); ++ frag_ptr = skb_frag_address(frag); ++ frag_size = skb_frag_size(frag); ++ } ++ ++ frag_ptr += offset; ++ frag_len = frag_size - offset; ++ ++ cur_len = min(len, frag_len); ++ ++ __frame_add_frag(frame, frag_page, frag_ptr, cur_len, frag_size); ++ len -= cur_len; ++ ++ while (len > 0) { ++ frag++; ++ frag_len = skb_frag_size(frag); ++ cur_len = min(len, frag_len); ++ __frame_add_frag(frame, skb_frag_page(frag), ++ skb_frag_address(frag), cur_len, frag_len); ++ len -= cur_len; ++ } ++} ++ + static struct sk_buff * + __ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen, +- int offset, int len) ++ int offset, int len, bool reuse_frag) + { + struct sk_buff *frame; ++ int cur_len = len; + + if (skb->len - offset < len) + return NULL; + + /* ++ * When reusing framents, copy some data to the head to simplify ++ * ethernet header handling and speed up protocol header processing ++ * in the stack later. ++ */ ++ if (reuse_frag) ++ cur_len = min_t(int, len, 32); ++ ++ /* + * Allocate and reserve two bytes more for payload + * alignment since sizeof(struct ethhdr) is 14. + */ +- frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + len); ++ frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + cur_len); + + skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); +- skb_copy_bits(skb, offset, skb_put(frame, len), len); ++ skb_copy_bits(skb, offset, skb_put(frame, cur_len), cur_len); ++ ++ len -= cur_len; ++ if (!len) ++ return frame; ++ ++ offset += cur_len; ++ __ieee80211_amsdu_copy_frag(skb, frame, offset, len); + + return frame; + } +@@ -676,6 +746,7 @@ void ieee80211_amsdu_to_8023s(struct sk_ + u8 *payload; + int offset = 0, remaining, err; + struct ethhdr eth; ++ bool reuse_frag = skb->head_frag && !skb_has_frag_list(skb); + bool reuse_skb = false; + bool last = false; + +@@ -703,12 +774,13 @@ void ieee80211_amsdu_to_8023s(struct sk_ + offset += sizeof(struct ethhdr); + /* reuse skb for the last subframe */ + last = remaining <= subframe_len + padding; +- if (!skb_is_nonlinear(skb) && last) { ++ if (!skb_is_nonlinear(skb) && !reuse_frag && last) { + skb_pull(skb, offset); + frame = skb; + reuse_skb = true; + } else { +- frame = __ieee80211_amsdu_copy(skb, hlen, offset, len); ++ frame = __ieee80211_amsdu_copy(skb, hlen, offset, len, ++ reuse_frag); + if (!frame) + goto purge; + diff --git a/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch b/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch deleted file mode 100644 index f26e059cf0..0000000000 --- a/package/kernel/mac80211/patches/334-ath9k-use-REG_RMW-and-rmw-buffer-in-ath9k_hw_def_set.patch +++ /dev/null @@ -1,67 +0,0 @@ -From: Oleksij Rempel <linux@rempel-privat.de> -Date: Sun, 22 Mar 2015 19:30:03 +0100 -Subject: [PATCH] ath9k: use REG_RMW and rmw buffer in - ath9k_hw_def_set_gain - -Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/eeprom_def.c -+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c -@@ -466,6 +466,7 @@ static void ath9k_hw_def_set_gain(struct - struct ar5416_eeprom_def *eep, - u8 txRxAttenLocal, int regChainOffset, int i) - { -+ ENABLE_REG_RMW_BUFFER(ah); - if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) { - txRxAttenLocal = pModal->txRxAttenCh[i]; - -@@ -483,16 +484,12 @@ static void ath9k_hw_def_set_gain(struct - AR_PHY_GAIN_2GHZ_XATTEN2_DB, - pModal->xatten2Db[i]); - } else { -- REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset, -- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) & -- ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) -- | SM(pModal-> bswMargin[i], -- AR_PHY_GAIN_2GHZ_BSW_MARGIN)); -- REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset, -- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) & -- ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) -- | SM(pModal->bswAtten[i], -- AR_PHY_GAIN_2GHZ_BSW_ATTEN)); -+ REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset, -+ SM(pModal-> bswMargin[i], AR_PHY_GAIN_2GHZ_BSW_MARGIN), -+ AR_PHY_GAIN_2GHZ_BSW_MARGIN); -+ REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset, -+ SM(pModal->bswAtten[i], AR_PHY_GAIN_2GHZ_BSW_ATTEN), -+ AR_PHY_GAIN_2GHZ_BSW_ATTEN); - } - } - -@@ -504,17 +501,14 @@ static void ath9k_hw_def_set_gain(struct - AR_PHY_RXGAIN + regChainOffset, - AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]); - } else { -- REG_WRITE(ah, -- AR_PHY_RXGAIN + regChainOffset, -- (REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) & -- ~AR_PHY_RXGAIN_TXRX_ATTEN) -- | SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN)); -- REG_WRITE(ah, -- AR_PHY_GAIN_2GHZ + regChainOffset, -- (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) & -- ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) | -- SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN)); -+ REG_RMW(ah, AR_PHY_RXGAIN + regChainOffset, -+ SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN), -+ AR_PHY_RXGAIN_TXRX_ATTEN); -+ REG_RMW(ah, AR_PHY_GAIN_2GHZ + regChainOffset, -+ SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN), -+ AR_PHY_GAIN_2GHZ_RXTX_MARGIN); - } -+ REG_RMW_BUFFER_FLUSH(ah); - } - - static void ath9k_hw_def_set_board_values(struct ath_hw *ah, diff --git a/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch b/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch new file mode 100644 index 0000000000..f8f4f0999d --- /dev/null +++ b/package/kernel/mac80211/patches/334-mac80211-fix-wiphy-supported_band-access.patch @@ -0,0 +1,36 @@ +From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> +Date: Wed, 10 Feb 2016 16:08:17 +0100 +Subject: [PATCH] mac80211: fix wiphy supported_band access + +Fix wiphy supported_band access in tx radiotap parsing. In particular, +info->band is always set to 0 (IEEE80211_BAND_2GHZ) since it has not +assigned yet. This cause a kernel crash on 5GHz only devices. +Move ieee80211_parse_tx_radiotap() after info->band assignment + +Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> +--- + +--- a/net/mac80211/tx.c ++++ b/net/mac80211/tx.c +@@ -1890,10 +1890,6 @@ netdev_tx_t ieee80211_monitor_start_xmit + info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_CTL_INJECTED; + +- /* process and remove the injection radiotap header */ +- if (!ieee80211_parse_tx_radiotap(local, skb)) +- goto fail; +- + rcu_read_lock(); + + /* +@@ -1955,6 +1951,10 @@ netdev_tx_t ieee80211_monitor_start_xmit + goto fail_rcu; + + info->band = chandef->chan->band; ++ /* process and remove the injection radiotap header */ ++ if (!ieee80211_parse_tx_radiotap(local, skb)) ++ goto fail_rcu; ++ + ieee80211_xmit(sdata, NULL, skb); + rcu_read_unlock(); + diff --git a/package/kernel/mac80211/patches/335-0001-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch b/package/kernel/mac80211/patches/335-0001-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch deleted file mode 100644 index 5e63a803b0..0000000000 --- a/package/kernel/mac80211/patches/335-0001-brcmfmac-Fix-oops-when-SDIO-device-is-removed.patch +++ /dev/null @@ -1,44 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 6 Mar 2015 18:40:38 +0100 -Subject: [PATCH] brcmfmac: Fix oops when SDIO device is removed. - -On removal of SDIO card both functions of card will be getting -a remove call. When the first is hanging in ctrl frame xmit then -the second will cause oops. This patch fixes the xmit ctrl -handling in case of serious errors and also limits the handling -for remove to function 1 only. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -@@ -1194,7 +1194,7 @@ static void brcmf_ops_sdio_remove(struct - brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); - brcmf_dbg(SDIO, "Function: %d\n", func->num); - -- if (func->num != 1 && func->num != 2) -+ if (func->num != 1) - return; - - bus_if = dev_get_drvdata(&func->dev); ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -2740,6 +2740,11 @@ static void brcmf_sdio_dpc(struct brcmf_ - if ((bus->sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) { - brcmf_err("failed backplane access over SDIO, halting operation\n"); - atomic_set(&bus->intstatus, 0); -+ if (bus->ctrl_frame_stat) { -+ bus->ctrl_frame_err = -ENODEV; -+ bus->ctrl_frame_stat = false; -+ brcmf_sdio_wait_event_wakeup(bus); -+ } - } else if (atomic_read(&bus->intstatus) || - atomic_read(&bus->ipend) > 0 || - (!atomic_read(&bus->fcstate) && diff --git a/package/kernel/mac80211/patches/335-0002-brcmfmac-Simplify-watchdog-sleep.patch b/package/kernel/mac80211/patches/335-0002-brcmfmac-Simplify-watchdog-sleep.patch deleted file mode 100644 index 201da75bfc..0000000000 --- a/package/kernel/mac80211/patches/335-0002-brcmfmac-Simplify-watchdog-sleep.patch +++ /dev/null @@ -1,157 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 6 Mar 2015 18:40:39 +0100 -Subject: [PATCH] brcmfmac: Simplify watchdog sleep. - -The watchdog thread is used to put the SDIO bus to sleep when the -system is idling. This patch simplifies the way it is determined -when sleep can be entered. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -485,10 +485,9 @@ struct brcmf_sdio { - #endif /* DEBUG */ - - uint clkstate; /* State of sd and backplane clock(s) */ -- bool activity; /* Activity flag for clock down */ - s32 idletime; /* Control for activity timeout */ -- s32 idlecount; /* Activity timeout counter */ -- s32 idleclock; /* How to set bus driver when idle */ -+ s32 idlecount; /* Activity timeout counter */ -+ s32 idleclock; /* How to set bus driver when idle */ - bool rxflow_mode; /* Rx flow control mode */ - bool rxflow; /* Is rx flow control on */ - bool alp_only; /* Don't use HT clock (ALP only) */ -@@ -511,6 +510,7 @@ struct brcmf_sdio { - struct workqueue_struct *brcmf_wq; - struct work_struct datawork; - atomic_t dpc_tskcnt; -+ atomic_t dpc_running; - - bool txoff; /* Transmit flow-controlled */ - struct brcmf_sdio_count sdcnt; -@@ -959,13 +959,8 @@ static int brcmf_sdio_clkctl(struct brcm - brcmf_dbg(SDIO, "Enter\n"); - - /* Early exit if we're already there */ -- if (bus->clkstate == target) { -- if (target == CLK_AVAIL) { -- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); -- bus->activity = true; -- } -+ if (bus->clkstate == target) - return 0; -- } - - switch (target) { - case CLK_AVAIL: -@@ -975,7 +970,6 @@ static int brcmf_sdio_clkctl(struct brcm - /* Now request HT Avail on the backplane */ - brcmf_sdio_htclk(bus, true, pendok); - brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); -- bus->activity = true; - break; - - case CLK_SDONLY: -@@ -1024,17 +1018,6 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio * - - /* Going to sleep */ - if (sleep) { -- /* Don't sleep if something is pending */ -- if (atomic_read(&bus->intstatus) || -- atomic_read(&bus->ipend) > 0 || -- bus->ctrl_frame_stat || -- (!atomic_read(&bus->fcstate) && -- brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && -- data_ok(bus))) { -- err = -EBUSY; -- goto done; -- } -- - clkcsr = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_CHIPCLKCSR, - &err); -@@ -1045,11 +1028,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio * - SBSDIO_ALP_AVAIL_REQ, &err); - } - err = brcmf_sdio_kso_control(bus, false); -- /* disable watchdog */ -- if (!err) -- brcmf_sdio_wd_timer(bus, 0); - } else { -- bus->idlecount = 0; - err = brcmf_sdio_kso_control(bus, true); - } - if (err) { -@@ -3566,7 +3545,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b - queue_work(bus->brcmf_wq, &bus->datawork); - } - --static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) -+static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) - { - brcmf_dbg(TIMER, "Enter\n"); - -@@ -3627,22 +3606,21 @@ static bool brcmf_sdio_bus_watchdog(stru - #endif /* DEBUG */ - - /* On idle timeout clear activity flag and/or turn off clock */ -- if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) { -- if (++bus->idlecount >= bus->idletime) { -+ if ((atomic_read(&bus->dpc_tskcnt) == 0) && -+ (atomic_read(&bus->dpc_running) == 0) && -+ (bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) { -+ bus->idlecount++; -+ if (bus->idlecount > bus->idletime) { -+ brcmf_dbg(SDIO, "idle\n"); -+ sdio_claim_host(bus->sdiodev->func[1]); -+ brcmf_sdio_wd_timer(bus, 0); - bus->idlecount = 0; -- if (bus->activity) { -- bus->activity = false; -- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); -- } else { -- brcmf_dbg(SDIO, "idle\n"); -- sdio_claim_host(bus->sdiodev->func[1]); -- brcmf_sdio_bus_sleep(bus, true, false); -- sdio_release_host(bus->sdiodev->func[1]); -- } -+ brcmf_sdio_bus_sleep(bus, true, false); -+ sdio_release_host(bus->sdiodev->func[1]); - } -+ } else { -+ bus->idlecount = 0; - } -- -- return (atomic_read(&bus->ipend) > 0); - } - - static void brcmf_sdio_dataworker(struct work_struct *work) -@@ -3651,8 +3629,11 @@ static void brcmf_sdio_dataworker(struct - datawork); - - while (atomic_read(&bus->dpc_tskcnt)) { -+ atomic_set(&bus->dpc_running, 1); - atomic_set(&bus->dpc_tskcnt, 0); - brcmf_sdio_dpc(bus); -+ bus->idlecount = 0; -+ atomic_set(&bus->dpc_running, 0); - } - if (brcmf_sdiod_freezing(bus->sdiodev)) { - brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN); -@@ -4154,6 +4135,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru - } - /* Initialize DPC thread */ - atomic_set(&bus->dpc_tskcnt, 0); -+ atomic_set(&bus->dpc_running, 0); - - /* Assign bus interface call back */ - bus->sdiodev->bus_if->dev = bus->sdiodev->dev; diff --git a/package/kernel/mac80211/patches/335-0003-brcmfmac-Fix-possible-race-condition.patch b/package/kernel/mac80211/patches/335-0003-brcmfmac-Fix-possible-race-condition.patch deleted file mode 100644 index 3a2de7a944..0000000000 --- a/package/kernel/mac80211/patches/335-0003-brcmfmac-Fix-possible-race-condition.patch +++ /dev/null @@ -1,83 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 6 Mar 2015 18:40:40 +0100 -Subject: [PATCH] brcmfmac: Fix possible race-condition. - -SDIO is using a "shared" variable to handoff ctl frames to DPC -and to see when they are done. In a timeout situation this can -lead to erroneous situation where DPC started to handle the ctl -frame while the timeout expired. This patch will fix this by -adding locking around the shared variable. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -2700,11 +2700,13 @@ static void brcmf_sdio_dpc(struct brcmf_ - if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) && - data_ok(bus)) { - sdio_claim_host(bus->sdiodev->func[1]); -- err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, -- bus->ctrl_frame_len); -+ if (bus->ctrl_frame_stat) { -+ err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, -+ bus->ctrl_frame_len); -+ bus->ctrl_frame_err = err; -+ bus->ctrl_frame_stat = false; -+ } - sdio_release_host(bus->sdiodev->func[1]); -- bus->ctrl_frame_err = err; -- bus->ctrl_frame_stat = false; - brcmf_sdio_wait_event_wakeup(bus); - } - /* Send queued frames (limit 1 if rx may still be pending) */ -@@ -2720,9 +2722,13 @@ static void brcmf_sdio_dpc(struct brcmf_ - brcmf_err("failed backplane access over SDIO, halting operation\n"); - atomic_set(&bus->intstatus, 0); - if (bus->ctrl_frame_stat) { -- bus->ctrl_frame_err = -ENODEV; -- bus->ctrl_frame_stat = false; -- brcmf_sdio_wait_event_wakeup(bus); -+ sdio_claim_host(bus->sdiodev->func[1]); -+ if (bus->ctrl_frame_stat) { -+ bus->ctrl_frame_err = -ENODEV; -+ bus->ctrl_frame_stat = false; -+ brcmf_sdio_wait_event_wakeup(bus); -+ } -+ sdio_release_host(bus->sdiodev->func[1]); - } - } else if (atomic_read(&bus->intstatus) || - atomic_read(&bus->ipend) > 0 || -@@ -2930,15 +2936,20 @@ brcmf_sdio_bus_txctl(struct device *dev, - brcmf_sdio_trigger_dpc(bus); - wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat, - msecs_to_jiffies(CTL_DONE_TIMEOUT)); -- -- if (!bus->ctrl_frame_stat) { -+ ret = 0; -+ if (bus->ctrl_frame_stat) { -+ sdio_claim_host(bus->sdiodev->func[1]); -+ if (bus->ctrl_frame_stat) { -+ brcmf_dbg(SDIO, "ctrl_frame timeout\n"); -+ bus->ctrl_frame_stat = false; -+ ret = -ETIMEDOUT; -+ } -+ sdio_release_host(bus->sdiodev->func[1]); -+ } -+ if (!ret) { - brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n", - bus->ctrl_frame_err); - ret = bus->ctrl_frame_err; -- } else { -- brcmf_dbg(SDIO, "ctrl_frame timeout\n"); -- bus->ctrl_frame_stat = false; -- ret = -ETIMEDOUT; - } - - if (ret) diff --git a/package/kernel/mac80211/patches/335-0004-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch b/package/kernel/mac80211/patches/335-0004-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch deleted file mode 100644 index c9eb9008a6..0000000000 --- a/package/kernel/mac80211/patches/335-0004-brcmfmac-Add-support-for-BCM4345-SDIO-chipset.patch +++ /dev/null @@ -1,86 +0,0 @@ -From: Syed Asifful Dayyan <syedd@broadcom.com> -Date: Fri, 6 Mar 2015 18:40:42 +0100 -Subject: [PATCH] brcmfmac: Add support for BCM4345 SDIO chipset. - -These changes add support for BCM4345 SDIO chipset. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Signed-off-by: Syed Asifful Dayyan <syedd@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -@@ -1096,6 +1096,7 @@ static const struct sdio_device_id brcmf - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341), - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362), - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339), -+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345), - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354), - { /* end: all zeroes */ } - }; ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -491,6 +491,10 @@ static void brcmf_chip_get_raminfo(struc - case BRCM_CC_43362_CHIP_ID: - ci->pub.ramsize = 0x3c000; - break; -+ case BRCM_CC_4345_CHIP_ID: -+ ci->pub.ramsize = 0xc8000; -+ ci->pub.rambase = 0x198000; -+ break; - case BRCM_CC_4339_CHIP_ID: - case BRCM_CC_4354_CHIP_ID: - case BRCM_CC_4356_CHIP_ID: ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -617,6 +617,8 @@ static const struct sdiod_drive_str sdio - #define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt" - #define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin" - #define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt" -+#define BCM4345_FIRMWARE_NAME "brcm/brcmfmac4345-sdio.bin" -+#define BCM4345_NVRAM_NAME "brcm/brcmfmac4345-sdio.txt" - #define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin" - #define BCM4354_NVRAM_NAME "brcm/brcmfmac4354-sdio.txt" - -@@ -640,6 +642,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM43362_NVRAM_NAME); - MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM4339_NVRAM_NAME); -+MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME); -+MODULE_FIRMWARE(BCM4345_NVRAM_NAME); - MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM4354_NVRAM_NAME); - -@@ -669,6 +673,7 @@ static const struct brcmf_firmware_names - { BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, - { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, - { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }, -+ { BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) }, - { BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) } - }; - ---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -@@ -37,6 +37,7 @@ - #define BRCM_CC_43362_CHIP_ID 43362 - #define BRCM_CC_4335_CHIP_ID 0x4335 - #define BRCM_CC_4339_CHIP_ID 0x4339 -+#define BRCM_CC_4345_CHIP_ID 0x4345 - #define BRCM_CC_4354_CHIP_ID 0x4354 - #define BRCM_CC_4356_CHIP_ID 0x4356 - #define BRCM_CC_43566_CHIP_ID 43566 ---- a/include/linux/mmc/sdio_ids.h -+++ b/include/linux/mmc/sdio_ids.h -@@ -33,6 +33,7 @@ - #define SDIO_DEVICE_ID_BROADCOM_43341 0xa94d - #define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335 - #define SDIO_DEVICE_ID_BROADCOM_43362 0xa962 -+#define SDIO_DEVICE_ID_BROADCOM_4345 0x4345 - #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354 - - #define SDIO_VENDOR_ID_INTEL 0x0089 diff --git a/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch b/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch new file mode 100644 index 0000000000..acaacf7cac --- /dev/null +++ b/package/kernel/mac80211/patches/335-mac80211-minstrel_ht-set-A-MSDU-tx-limits-based-on-s.patch @@ -0,0 +1,61 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Thu, 18 Feb 2016 19:30:05 +0100 +Subject: [PATCH] mac80211: minstrel_ht: set A-MSDU tx limits based on selected + max_prob_rate + +Prevents excessive A-MSDU aggregation at low data rates or bad +conditions. + +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/net/mac80211/rc80211_minstrel_ht.c ++++ b/net/mac80211/rc80211_minstrel_ht.c +@@ -883,6 +883,39 @@ minstrel_ht_set_rate(struct minstrel_pri + ratetbl->rate[offset].flags = flags; + } + ++static int ++minstrel_ht_get_max_amsdu_len(struct minstrel_ht_sta *mi) ++{ ++ int group = mi->max_prob_rate / MCS_GROUP_RATES; ++ const struct mcs_group *g = &minstrel_mcs_groups[group]; ++ int rate = mi->max_prob_rate % MCS_GROUP_RATES; ++ ++ /* Disable A-MSDU if max_prob_rate is bad */ ++ if (mi->groups[group].rates[rate].prob_ewma < MINSTREL_FRAC(50, 100)) ++ return 1; ++ ++ /* If the rate is slower than single-stream MCS1, make A-MSDU limit small */ ++ if (g->duration[rate] > MCS_DURATION(1, 0, 52)) ++ return 500; ++ ++ /* ++ * If the rate is slower than single-stream MCS4, limit A-MSDU to usual ++ * data packet size ++ */ ++ if (g->duration[rate] > MCS_DURATION(1, 0, 104)) ++ return 1500; ++ ++ /* ++ * If the rate is slower than single-stream MCS7, limit A-MSDU to twice ++ * the usual data packet size ++ */ ++ if (g->duration[rate] > MCS_DURATION(1, 0, 260)) ++ return 3000; ++ ++ /* unlimited */ ++ return 0; ++} ++ + static void + minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) + { +@@ -907,6 +940,7 @@ minstrel_ht_update_rates(struct minstrel + minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate); + } + ++ mi->sta->max_rc_amsdu_len = minstrel_ht_get_max_amsdu_len(mi); + rates->rate[i].idx = -1; + rate_control_set_rates(mp->hw, mi->sta, rates); + } diff --git a/package/kernel/mac80211/patches/336-0001-brcmfmac-remove-duplication-of-ramsize-info.patch b/package/kernel/mac80211/patches/336-0001-brcmfmac-remove-duplication-of-ramsize-info.patch deleted file mode 100644 index 7a688c4be6..0000000000 --- a/package/kernel/mac80211/patches/336-0001-brcmfmac-remove-duplication-of-ramsize-info.patch +++ /dev/null @@ -1,48 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 11 Mar 2015 16:11:27 +0100 -Subject: [PATCH] brcmfmac: remove duplication of ramsize info - -Removing the ramsize from the brcmf_sdio structure to avoid -duplication. The information is available in brcmf_chip -structure. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -432,8 +432,6 @@ struct brcmf_sdio { - struct brcmf_sdio_dev *sdiodev; /* sdio device handler */ - struct brcmf_chip *ci; /* Chip info struct */ - -- u32 ramsize; /* Size of RAM in SOCRAM (bytes) */ -- - u32 hostintmask; /* Copy of Host Interrupt Mask */ - atomic_t intstatus; /* Intstatus bits (events) pending */ - atomic_t fcstate; /* State of dongle flow-control */ -@@ -1075,7 +1073,7 @@ static int brcmf_sdio_readshared(struct - struct sdpcm_shared_le sh_le; - __le32 addr_le; - -- shaddr = bus->ci->rambase + bus->ramsize - 4; -+ shaddr = bus->ci->rambase + bus->ci->ramsize - 4; - - /* - * Read last word in socram to determine -@@ -3871,13 +3869,6 @@ brcmf_sdio_probe_attach(struct brcmf_sdi - drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; - brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength); - -- /* Get info on the SOCRAM cores... */ -- bus->ramsize = bus->ci->ramsize; -- if (!(bus->ramsize)) { -- brcmf_err("failed to find SOCRAM memory!\n"); -- goto fail; -- } -- - /* Set card control so an SDIO card reset does a WLAN backplane reset */ - reg_val = brcmf_sdiod_regrb(bus->sdiodev, - SDIO_CCCR_BRCM_CARDCTRL, &err); diff --git a/package/kernel/mac80211/patches/336-0002-brcmfmac-always-perform-cores-checks.patch b/package/kernel/mac80211/patches/336-0002-brcmfmac-always-perform-cores-checks.patch deleted file mode 100644 index e2a2074247..0000000000 --- a/package/kernel/mac80211/patches/336-0002-brcmfmac-always-perform-cores-checks.patch +++ /dev/null @@ -1,74 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 11 Mar 2015 16:11:28 +0100 -Subject: [PATCH] brcmfmac: always perform cores checks - -Instead of checking the cores in the chip only if CONFIG_BRCMDBG -is selected perform the check always and extend it with more sanity -checking. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -419,13 +419,13 @@ static struct brcmf_core *brcmf_chip_add - return &core->pub; - } - --#ifdef DEBUG - /* safety check for chipinfo */ - static int brcmf_chip_cores_check(struct brcmf_chip_priv *ci) - { - struct brcmf_core_priv *core; - bool need_socram = false; - bool has_socram = false; -+ bool cpu_found = false; - int idx = 1; - - list_for_each_entry(core, &ci->cores, list) { -@@ -435,12 +435,14 @@ static int brcmf_chip_cores_check(struct - - switch (core->pub.id) { - case BCMA_CORE_ARM_CM3: -+ cpu_found = true; - need_socram = true; - break; - case BCMA_CORE_INTERNAL_MEM: - has_socram = true; - break; - case BCMA_CORE_ARM_CR4: -+ cpu_found = true; - if (ci->pub.rambase == 0) { - brcmf_err("RAM base not provided with ARM CR4 core\n"); - return -ENOMEM; -@@ -451,19 +453,21 @@ static int brcmf_chip_cores_check(struct - } - } - -+ if (!cpu_found) { -+ brcmf_err("CPU core not detected\n"); -+ return -ENXIO; -+ } - /* check RAM core presence for ARM CM3 core */ - if (need_socram && !has_socram) { - brcmf_err("RAM core not provided with ARM CM3 core\n"); - return -ENODEV; - } -+ if (!ci->pub.ramsize) { -+ brcmf_err("RAM size is undetermined\n"); -+ return -ENOMEM; -+ } - return 0; - } --#else /* DEBUG */ --static inline int brcmf_chip_cores_check(struct brcmf_chip_priv *ci) --{ -- return 0; --} --#endif - - static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci) - { diff --git a/package/kernel/mac80211/patches/336-0003-brcmfmac-rename-chip-download-functions.patch b/package/kernel/mac80211/patches/336-0003-brcmfmac-rename-chip-download-functions.patch deleted file mode 100644 index a272800577..0000000000 --- a/package/kernel/mac80211/patches/336-0003-brcmfmac-rename-chip-download-functions.patch +++ /dev/null @@ -1,240 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 11 Mar 2015 16:11:29 +0100 -Subject: [PATCH] brcmfmac: rename chip download functions - -The functions brcmf_chip_[enter/exit]_download() are not exclusively -used for firmware download so rename these more appropriate. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -807,7 +807,7 @@ struct brcmf_chip *brcmf_chip_attach(voi - err = -EINVAL; - if (WARN_ON(!ops->prepare)) - err = -EINVAL; -- if (WARN_ON(!ops->exit_dl)) -+ if (WARN_ON(!ops->activate)) - err = -EINVAL; - if (err < 0) - return ERR_PTR(-EINVAL); -@@ -905,7 +905,7 @@ void brcmf_chip_resetcore(struct brcmf_c - } - - static void --brcmf_chip_cm3_enterdl(struct brcmf_chip_priv *chip) -+brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip) - { - struct brcmf_core *core; - -@@ -919,7 +919,7 @@ brcmf_chip_cm3_enterdl(struct brcmf_chip - brcmf_chip_resetcore(core, 0, 0, 0); - } - --static bool brcmf_chip_cm3_exitdl(struct brcmf_chip_priv *chip) -+static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip) - { - struct brcmf_core *core; - -@@ -929,7 +929,7 @@ static bool brcmf_chip_cm3_exitdl(struct - return false; - } - -- chip->ops->exit_dl(chip->ctx, &chip->pub, 0); -+ chip->ops->activate(chip->ctx, &chip->pub, 0); - - core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CM3); - brcmf_chip_resetcore(core, 0, 0, 0); -@@ -938,7 +938,7 @@ static bool brcmf_chip_cm3_exitdl(struct - } - - static inline void --brcmf_chip_cr4_enterdl(struct brcmf_chip_priv *chip) -+brcmf_chip_cr4_set_passive(struct brcmf_chip_priv *chip) - { - struct brcmf_core *core; - -@@ -951,11 +951,11 @@ brcmf_chip_cr4_enterdl(struct brcmf_chip - D11_BCMA_IOCTL_PHYCLOCKEN); - } - --static bool brcmf_chip_cr4_exitdl(struct brcmf_chip_priv *chip, u32 rstvec) -+static bool brcmf_chip_cr4_set_active(struct brcmf_chip_priv *chip, u32 rstvec) - { - struct brcmf_core *core; - -- chip->ops->exit_dl(chip->ctx, &chip->pub, rstvec); -+ chip->ops->activate(chip->ctx, &chip->pub, rstvec); - - /* restore ARM */ - core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CR4); -@@ -964,7 +964,7 @@ static bool brcmf_chip_cr4_exitdl(struct - return true; - } - --void brcmf_chip_enter_download(struct brcmf_chip *pub) -+void brcmf_chip_set_passive(struct brcmf_chip *pub) - { - struct brcmf_chip_priv *chip; - struct brcmf_core *arm; -@@ -974,14 +974,14 @@ void brcmf_chip_enter_download(struct br - chip = container_of(pub, struct brcmf_chip_priv, pub); - arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4); - if (arm) { -- brcmf_chip_cr4_enterdl(chip); -+ brcmf_chip_cr4_set_passive(chip); - return; - } - -- brcmf_chip_cm3_enterdl(chip); -+ brcmf_chip_cm3_set_passive(chip); - } - --bool brcmf_chip_exit_download(struct brcmf_chip *pub, u32 rstvec) -+bool brcmf_chip_set_active(struct brcmf_chip *pub, u32 rstvec) - { - struct brcmf_chip_priv *chip; - struct brcmf_core *arm; -@@ -991,9 +991,9 @@ bool brcmf_chip_exit_download(struct brc - chip = container_of(pub, struct brcmf_chip_priv, pub); - arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4); - if (arm) -- return brcmf_chip_cr4_exitdl(chip, rstvec); -+ return brcmf_chip_cr4_set_active(chip, rstvec); - -- return brcmf_chip_cm3_exitdl(chip); -+ return brcmf_chip_cm3_set_active(chip); - } - - bool brcmf_chip_sr_capable(struct brcmf_chip *pub) ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h -@@ -64,7 +64,7 @@ struct brcmf_core { - * @write32: write 32-bit value over bus. - * @prepare: prepare bus for core configuration. - * @setup: bus-specific core setup. -- * @exit_dl: exit download state. -+ * @active: chip becomes active. - * The callback should use the provided @rstvec when non-zero. - */ - struct brcmf_buscore_ops { -@@ -72,7 +72,7 @@ struct brcmf_buscore_ops { - void (*write32)(void *ctx, u32 addr, u32 value); - int (*prepare)(void *ctx); - int (*setup)(void *ctx, struct brcmf_chip *chip); -- void (*exit_dl)(void *ctx, struct brcmf_chip *chip, u32 rstvec); -+ void (*activate)(void *ctx, struct brcmf_chip *chip, u32 rstvec); - }; - - struct brcmf_chip *brcmf_chip_attach(void *ctx, -@@ -84,8 +84,8 @@ bool brcmf_chip_iscoreup(struct brcmf_co - void brcmf_chip_coredisable(struct brcmf_core *core, u32 prereset, u32 reset); - void brcmf_chip_resetcore(struct brcmf_core *core, u32 prereset, u32 reset, - u32 postreset); --void brcmf_chip_enter_download(struct brcmf_chip *ci); --bool brcmf_chip_exit_download(struct brcmf_chip *ci, u32 rstvec); -+void brcmf_chip_set_passive(struct brcmf_chip *ci); -+bool brcmf_chip_set_active(struct brcmf_chip *ci, u32 rstvec); - bool brcmf_chip_sr_capable(struct brcmf_chip *pub); - - #endif /* BRCMF_AXIDMP_H */ ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -509,7 +509,7 @@ static void brcmf_pcie_attach(struct brc - - static int brcmf_pcie_enter_download_state(struct brcmf_pciedev_info *devinfo) - { -- brcmf_chip_enter_download(devinfo->ci); -+ brcmf_chip_set_passive(devinfo->ci); - - if (devinfo->ci->chip == BRCM_CC_43602_CHIP_ID) { - brcmf_pcie_select_core(devinfo, BCMA_CORE_ARM_CR4); -@@ -536,7 +536,7 @@ static int brcmf_pcie_exit_download_stat - brcmf_chip_resetcore(core, 0, 0, 0); - } - -- return !brcmf_chip_exit_download(devinfo->ci, resetintr); -+ return !brcmf_chip_set_active(devinfo->ci, resetintr); - } - - -@@ -1566,8 +1566,8 @@ static int brcmf_pcie_buscoreprep(void * - } - - --static void brcmf_pcie_buscore_exitdl(void *ctx, struct brcmf_chip *chip, -- u32 rstvec) -+static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip, -+ u32 rstvec) - { - struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx; - -@@ -1577,7 +1577,7 @@ static void brcmf_pcie_buscore_exitdl(vo - - static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = { - .prepare = brcmf_pcie_buscoreprep, -- .exit_dl = brcmf_pcie_buscore_exitdl, -+ .activate = brcmf_pcie_buscore_activate, - .read32 = brcmf_pcie_buscore_read32, - .write32 = brcmf_pcie_buscore_write32, - }; ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -3357,7 +3357,7 @@ static int brcmf_sdio_download_firmware( - brcmf_sdio_clkctl(bus, CLK_AVAIL, false); - - /* Keep arm in reset */ -- brcmf_chip_enter_download(bus->ci); -+ brcmf_chip_set_passive(bus->ci); - - rstvec = get_unaligned_le32(fw->data); - brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec); -@@ -3378,7 +3378,7 @@ static int brcmf_sdio_download_firmware( - } - - /* Take arm out of reset */ -- if (!brcmf_chip_exit_download(bus->ci, rstvec)) { -+ if (!brcmf_chip_set_active(bus->ci, rstvec)) { - brcmf_err("error getting out of ARM core reset\n"); - goto err; - } -@@ -3771,8 +3771,8 @@ static int brcmf_sdio_buscoreprep(void * - return 0; - } - --static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip, -- u32 rstvec) -+static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip, -+ u32 rstvec) - { - struct brcmf_sdio_dev *sdiodev = ctx; - struct brcmf_core *core; -@@ -3815,7 +3815,7 @@ static void brcmf_sdio_buscore_write32(v - - static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = { - .prepare = brcmf_sdio_buscoreprep, -- .exit_dl = brcmf_sdio_buscore_exitdl, -+ .activate = brcmf_sdio_buscore_activate, - .read32 = brcmf_sdio_buscore_read32, - .write32 = brcmf_sdio_buscore_write32, - }; -@@ -4239,12 +4239,11 @@ void brcmf_sdio_remove(struct brcmf_sdio - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_clkctl(bus, CLK_AVAIL, false); - /* Leave the device in state where it is -- * 'quiet'. This is done by putting it in -- * download_state which essentially resets -- * all necessary cores. -+ * 'passive'. This is done by resetting all -+ * necessary cores. - */ - msleep(20); -- brcmf_chip_enter_download(bus->ci); -+ brcmf_chip_set_passive(bus->ci); - brcmf_sdio_clkctl(bus, CLK_NONE, false); - sdio_release_host(bus->sdiodev->func[1]); - } diff --git a/package/kernel/mac80211/patches/336-0004-brcmfmac-assure-device-is-ready-for-download-after-b.patch b/package/kernel/mac80211/patches/336-0004-brcmfmac-assure-device-is-ready-for-download-after-b.patch deleted file mode 100644 index 6b1dd8144f..0000000000 --- a/package/kernel/mac80211/patches/336-0004-brcmfmac-assure-device-is-ready-for-download-after-b.patch +++ /dev/null @@ -1,61 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 11 Mar 2015 16:11:30 +0100 -Subject: [PATCH] brcmfmac: assure device is ready for download after - brcmf_chip_attach() - -Make the brcmf_chip_attach() function responsible for putting the -device in a state where it is accessible for firmware download. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -786,12 +786,6 @@ static int brcmf_chip_setup(struct brcmf - if (chip->ops->setup) - ret = chip->ops->setup(chip->ctx, pub); - -- /* -- * Make sure any on-chip ARM is off (in case strapping is wrong), -- * or downloaded code was already running. -- */ -- brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3); -- brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CR4); - return ret; - } - -@@ -833,6 +827,8 @@ struct brcmf_chip *brcmf_chip_attach(voi - if (err < 0) - goto fail; - -+ /* assure chip is passive for download */ -+ brcmf_chip_set_passive(&chip->pub); - return &chip->pub; - - fail: ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -509,8 +509,6 @@ static void brcmf_pcie_attach(struct brc - - static int brcmf_pcie_enter_download_state(struct brcmf_pciedev_info *devinfo) - { -- brcmf_chip_set_passive(devinfo->ci); -- - if (devinfo->ci->chip == BRCM_CC_43602_CHIP_ID) { - brcmf_pcie_select_core(devinfo, BCMA_CORE_ARM_CR4); - brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_ARMCR4REG_BANKIDX, ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -3356,9 +3356,6 @@ static int brcmf_sdio_download_firmware( - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_clkctl(bus, CLK_AVAIL, false); - -- /* Keep arm in reset */ -- brcmf_chip_set_passive(bus->ci); -- - rstvec = get_unaligned_le32(fw->data); - brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec); - diff --git a/package/kernel/mac80211/patches/336-0005-brcmfmac-extract-ram-size-info-from-internal-memory-.patch b/package/kernel/mac80211/patches/336-0005-brcmfmac-extract-ram-size-info-from-internal-memory-.patch deleted file mode 100644 index bcc2ed4868..0000000000 --- a/package/kernel/mac80211/patches/336-0005-brcmfmac-extract-ram-size-info-from-internal-memory-.patch +++ /dev/null @@ -1,367 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 11 Mar 2015 16:11:31 +0100 -Subject: [PATCH] brcmfmac: extract ram size info from internal memory - registers - -Instead of hard-coded memory sizes it is possible to obtain that -information from the internal memory registers. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -100,9 +100,6 @@ - #define BCM4329_CORE_SOCRAM_BASE 0x18003000 - /* ARM Cortex M3 core, ID 0x82a */ - #define BCM4329_CORE_ARM_BASE 0x18002000 --#define BCM4329_RAMSIZE 0x48000 --/* bcm43143 */ --#define BCM43143_RAMSIZE 0x70000 - - #define CORE_SB(base, field) \ - (base + SBCONFIGOFF + offsetof(struct sbconfig, field)) -@@ -150,6 +147,78 @@ struct sbconfig { - u32 sbidhigh; /* identification */ - }; - -+/* bankidx and bankinfo reg defines corerev >= 8 */ -+#define SOCRAM_BANKINFO_RETNTRAM_MASK 0x00010000 -+#define SOCRAM_BANKINFO_SZMASK 0x0000007f -+#define SOCRAM_BANKIDX_ROM_MASK 0x00000100 -+ -+#define SOCRAM_BANKIDX_MEMTYPE_SHIFT 8 -+/* socram bankinfo memtype */ -+#define SOCRAM_MEMTYPE_RAM 0 -+#define SOCRAM_MEMTYPE_R0M 1 -+#define SOCRAM_MEMTYPE_DEVRAM 2 -+ -+#define SOCRAM_BANKINFO_SZBASE 8192 -+#define SRCI_LSS_MASK 0x00f00000 -+#define SRCI_LSS_SHIFT 20 -+#define SRCI_SRNB_MASK 0xf0 -+#define SRCI_SRNB_SHIFT 4 -+#define SRCI_SRBSZ_MASK 0xf -+#define SRCI_SRBSZ_SHIFT 0 -+#define SR_BSZ_BASE 14 -+ -+struct sbsocramregs { -+ u32 coreinfo; -+ u32 bwalloc; -+ u32 extracoreinfo; -+ u32 biststat; -+ u32 bankidx; -+ u32 standbyctrl; -+ -+ u32 errlogstatus; /* rev 6 */ -+ u32 errlogaddr; /* rev 6 */ -+ /* used for patching rev 3 & 5 */ -+ u32 cambankidx; -+ u32 cambankstandbyctrl; -+ u32 cambankpatchctrl; -+ u32 cambankpatchtblbaseaddr; -+ u32 cambankcmdreg; -+ u32 cambankdatareg; -+ u32 cambankmaskreg; -+ u32 PAD[1]; -+ u32 bankinfo; /* corev 8 */ -+ u32 bankpda; -+ u32 PAD[14]; -+ u32 extmemconfig; -+ u32 extmemparitycsr; -+ u32 extmemparityerrdata; -+ u32 extmemparityerrcnt; -+ u32 extmemwrctrlandsize; -+ u32 PAD[84]; -+ u32 workaround; -+ u32 pwrctl; /* corerev >= 2 */ -+ u32 PAD[133]; -+ u32 sr_control; /* corerev >= 15 */ -+ u32 sr_status; /* corerev >= 15 */ -+ u32 sr_address; /* corerev >= 15 */ -+ u32 sr_data; /* corerev >= 15 */ -+}; -+ -+#define SOCRAMREGOFFS(_f) offsetof(struct sbsocramregs, _f) -+ -+#define ARMCR4_CAP (0x04) -+#define ARMCR4_BANKIDX (0x40) -+#define ARMCR4_BANKINFO (0x44) -+#define ARMCR4_BANKPDA (0x4C) -+ -+#define ARMCR4_TCBBNB_MASK 0xf0 -+#define ARMCR4_TCBBNB_SHIFT 4 -+#define ARMCR4_TCBANB_MASK 0xf -+#define ARMCR4_TCBANB_SHIFT 0 -+ -+#define ARMCR4_BSZ_MASK 0x3f -+#define ARMCR4_BSZ_MULT 8192 -+ - struct brcmf_core_priv { - struct brcmf_core pub; - u32 wrapbase; -@@ -443,10 +512,6 @@ static int brcmf_chip_cores_check(struct - break; - case BCMA_CORE_ARM_CR4: - cpu_found = true; -- if (ci->pub.rambase == 0) { -- brcmf_err("RAM base not provided with ARM CR4 core\n"); -- return -ENOMEM; -- } - break; - default: - break; -@@ -462,60 +527,160 @@ static int brcmf_chip_cores_check(struct - brcmf_err("RAM core not provided with ARM CM3 core\n"); - return -ENODEV; - } -- if (!ci->pub.ramsize) { -- brcmf_err("RAM size is undetermined\n"); -- return -ENOMEM; -- } - return 0; - } - --static void brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci) -+static u32 brcmf_chip_core_read32(struct brcmf_core_priv *core, u16 reg) - { -- switch (ci->pub.chip) { -- case BRCM_CC_4329_CHIP_ID: -- ci->pub.ramsize = BCM4329_RAMSIZE; -- break; -- case BRCM_CC_43143_CHIP_ID: -- ci->pub.ramsize = BCM43143_RAMSIZE; -- break; -- case BRCM_CC_43241_CHIP_ID: -- ci->pub.ramsize = 0x90000; -- break; -- case BRCM_CC_4330_CHIP_ID: -- ci->pub.ramsize = 0x48000; -- break; -+ return core->chip->ops->read32(core->chip->ctx, core->pub.base + reg); -+} -+ -+static void brcmf_chip_core_write32(struct brcmf_core_priv *core, -+ u16 reg, u32 val) -+{ -+ core->chip->ops->write32(core->chip->ctx, core->pub.base + reg, val); -+} -+ -+static bool brcmf_chip_socram_banksize(struct brcmf_core_priv *core, u8 idx, -+ u32 *banksize) -+{ -+ u32 bankinfo; -+ u32 bankidx = (SOCRAM_MEMTYPE_RAM << SOCRAM_BANKIDX_MEMTYPE_SHIFT); -+ -+ bankidx |= idx; -+ brcmf_chip_core_write32(core, SOCRAMREGOFFS(bankidx), bankidx); -+ bankinfo = brcmf_chip_core_read32(core, SOCRAMREGOFFS(bankinfo)); -+ *banksize = (bankinfo & SOCRAM_BANKINFO_SZMASK) + 1; -+ *banksize *= SOCRAM_BANKINFO_SZBASE; -+ return !!(bankinfo & SOCRAM_BANKINFO_RETNTRAM_MASK); -+} -+ -+static void brcmf_chip_socram_ramsize(struct brcmf_core_priv *sr, u32 *ramsize, -+ u32 *srsize) -+{ -+ u32 coreinfo; -+ uint nb, banksize, lss; -+ bool retent; -+ int i; -+ -+ *ramsize = 0; -+ *srsize = 0; -+ -+ if (WARN_ON(sr->pub.rev < 4)) -+ return; -+ -+ if (!brcmf_chip_iscoreup(&sr->pub)) -+ brcmf_chip_resetcore(&sr->pub, 0, 0, 0); -+ -+ /* Get info for determining size */ -+ coreinfo = brcmf_chip_core_read32(sr, SOCRAMREGOFFS(coreinfo)); -+ nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT; -+ -+ if ((sr->pub.rev <= 7) || (sr->pub.rev == 12)) { -+ banksize = (coreinfo & SRCI_SRBSZ_MASK); -+ lss = (coreinfo & SRCI_LSS_MASK) >> SRCI_LSS_SHIFT; -+ if (lss != 0) -+ nb--; -+ *ramsize = nb * (1 << (banksize + SR_BSZ_BASE)); -+ if (lss != 0) -+ *ramsize += (1 << ((lss - 1) + SR_BSZ_BASE)); -+ } else { -+ nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT; -+ for (i = 0; i < nb; i++) { -+ retent = brcmf_chip_socram_banksize(sr, i, &banksize); -+ *ramsize += banksize; -+ if (retent) -+ *srsize += banksize; -+ } -+ } -+ -+ /* hardcoded save&restore memory sizes */ -+ switch (sr->chip->pub.chip) { - case BRCM_CC_4334_CHIP_ID: -- case BRCM_CC_43340_CHIP_ID: -- ci->pub.ramsize = 0x80000; -+ if (sr->chip->pub.chiprev < 2) -+ *srsize = (32 * 1024); - break; -- case BRCM_CC_4335_CHIP_ID: -- ci->pub.ramsize = 0xc0000; -- ci->pub.rambase = 0x180000; -- break; -- case BRCM_CC_43362_CHIP_ID: -- ci->pub.ramsize = 0x3c000; -+ default: - break; -+ } -+} -+ -+/** Return the TCM-RAM size of the ARMCR4 core. */ -+static u32 brcmf_chip_tcm_ramsize(struct brcmf_core_priv *cr4) -+{ -+ u32 corecap; -+ u32 memsize = 0; -+ u32 nab; -+ u32 nbb; -+ u32 totb; -+ u32 bxinfo; -+ u32 idx; -+ -+ corecap = brcmf_chip_core_read32(cr4, ARMCR4_CAP); -+ -+ nab = (corecap & ARMCR4_TCBANB_MASK) >> ARMCR4_TCBANB_SHIFT; -+ nbb = (corecap & ARMCR4_TCBBNB_MASK) >> ARMCR4_TCBBNB_SHIFT; -+ totb = nab + nbb; -+ -+ for (idx = 0; idx < totb; idx++) { -+ brcmf_chip_core_write32(cr4, ARMCR4_BANKIDX, idx); -+ bxinfo = brcmf_chip_core_read32(cr4, ARMCR4_BANKINFO); -+ memsize += ((bxinfo & ARMCR4_BSZ_MASK) + 1) * ARMCR4_BSZ_MULT; -+ } -+ -+ return memsize; -+} -+ -+static u32 brcmf_chip_tcm_rambase(struct brcmf_chip_priv *ci) -+{ -+ switch (ci->pub.chip) { - case BRCM_CC_4345_CHIP_ID: -- ci->pub.ramsize = 0xc8000; -- ci->pub.rambase = 0x198000; -- break; -+ return 0x198000; -+ case BRCM_CC_4335_CHIP_ID: - case BRCM_CC_4339_CHIP_ID: - case BRCM_CC_4354_CHIP_ID: - case BRCM_CC_4356_CHIP_ID: - case BRCM_CC_43567_CHIP_ID: - case BRCM_CC_43569_CHIP_ID: - case BRCM_CC_43570_CHIP_ID: -- ci->pub.ramsize = 0xc0000; -- ci->pub.rambase = 0x180000; -- break; - case BRCM_CC_43602_CHIP_ID: -- ci->pub.ramsize = 0xf0000; -- ci->pub.rambase = 0x180000; -- break; -+ return 0x180000; - default: - brcmf_err("unknown chip: %s\n", ci->pub.name); - break; - } -+ return 0; -+} -+ -+static int brcmf_chip_get_raminfo(struct brcmf_chip_priv *ci) -+{ -+ struct brcmf_core_priv *mem_core; -+ struct brcmf_core *mem; -+ -+ mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_ARM_CR4); -+ if (mem) { -+ mem_core = container_of(mem, struct brcmf_core_priv, pub); -+ ci->pub.ramsize = brcmf_chip_tcm_ramsize(mem_core); -+ ci->pub.rambase = brcmf_chip_tcm_rambase(ci); -+ if (!ci->pub.rambase) { -+ brcmf_err("RAM base not provided with ARM CR4 core\n"); -+ return -EINVAL; -+ } -+ } else { -+ mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_INTERNAL_MEM); -+ mem_core = container_of(mem, struct brcmf_core_priv, pub); -+ brcmf_chip_socram_ramsize(mem_core, &ci->pub.ramsize, -+ &ci->pub.srsize); -+ } -+ brcmf_dbg(INFO, "RAM: base=0x%x size=%d (0x%x) sr=%d (0x%x)\n", -+ ci->pub.rambase, ci->pub.ramsize, ci->pub.ramsize, -+ ci->pub.srsize, ci->pub.srsize); -+ -+ if (!ci->pub.ramsize) { -+ brcmf_err("RAM size is undetermined\n"); -+ return -ENOMEM; -+ } -+ return 0; - } - - static u32 brcmf_chip_dmp_get_desc(struct brcmf_chip_priv *ci, u32 *eromaddr, -@@ -668,6 +833,7 @@ static int brcmf_chip_recognition(struct - struct brcmf_core *core; - u32 regdata; - u32 socitype; -+ int ret; - - /* Get CC core rev - * Chipid is assume to be at offset 0 from SI_ENUM_BASE -@@ -720,9 +886,13 @@ static int brcmf_chip_recognition(struct - return -ENODEV; - } - -- brcmf_chip_get_raminfo(ci); -- -- return brcmf_chip_cores_check(ci); -+ ret = brcmf_chip_cores_check(ci); -+ if (ret) -+ return ret; -+ -+ /* assure chip is passive for core access */ -+ brcmf_chip_set_passive(&ci->pub); -+ return brcmf_chip_get_raminfo(ci); - } - - static void brcmf_chip_disable_arm(struct brcmf_chip_priv *chip, u16 id) -@@ -827,8 +997,6 @@ struct brcmf_chip *brcmf_chip_attach(voi - if (err < 0) - goto fail; - -- /* assure chip is passive for download */ -- brcmf_chip_set_passive(&chip->pub); - return &chip->pub; - - fail: ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h -@@ -30,7 +30,8 @@ - * @pmucaps: PMU capabilities. - * @pmurev: PMU revision. - * @rambase: RAM base address (only applicable for ARM CR4 chips). -- * @ramsize: amount of RAM on chip. -+ * @ramsize: amount of RAM on chip including retention. -+ * @srsize: amount of retention RAM on chip. - * @name: string representation of the chip identifier. - */ - struct brcmf_chip { -@@ -41,6 +42,7 @@ struct brcmf_chip { - u32 pmurev; - u32 rambase; - u32 ramsize; -+ u32 srsize; - char name[8]; - }; - diff --git a/package/kernel/mac80211/patches/336-0006-brcmfmac-take-save-restore-memory-into-account-for-S.patch b/package/kernel/mac80211/patches/336-0006-brcmfmac-take-save-restore-memory-into-account-for-S.patch deleted file mode 100644 index 69618a7aa7..0000000000 --- a/package/kernel/mac80211/patches/336-0006-brcmfmac-take-save-restore-memory-into-account-for-S.patch +++ /dev/null @@ -1,96 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 11 Mar 2015 16:11:32 +0100 -Subject: [PATCH] brcmfmac: take save&restore memory into account for SDIO - shared info - -The firmware provides pointer to SDIO shared information at end of -RAM during firmware initialization. End of RAM is obviously determined -by the actual ram size, but part of that may be used for save&restore -memory. In that case another location in RAM will hold the pointer. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -1067,44 +1067,47 @@ static inline bool brcmf_sdio_valid_shar - static int brcmf_sdio_readshared(struct brcmf_sdio *bus, - struct sdpcm_shared *sh) - { -- u32 addr; -+ u32 addr = 0; - int rv; - u32 shaddr = 0; - struct sdpcm_shared_le sh_le; - __le32 addr_le; - -- shaddr = bus->ci->rambase + bus->ci->ramsize - 4; -+ sdio_claim_host(bus->sdiodev->func[1]); -+ brcmf_sdio_bus_sleep(bus, false, false); - - /* - * Read last word in socram to determine - * address of sdpcm_shared structure - */ -- sdio_claim_host(bus->sdiodev->func[1]); -- brcmf_sdio_bus_sleep(bus, false, false); -- rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); -- sdio_release_host(bus->sdiodev->func[1]); -+ shaddr = bus->ci->rambase + bus->ci->ramsize - 4; -+ if (!bus->ci->rambase && brcmf_chip_sr_capable(bus->ci)) -+ shaddr -= bus->ci->srsize; -+ rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, -+ (u8 *)&addr_le, 4); - if (rv < 0) -- return rv; -- -- addr = le32_to_cpu(addr_le); -- -- brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr); -+ goto fail; - - /* - * Check if addr is valid. - * NVRAM length at the end of memory should have been overwritten. - */ -+ addr = le32_to_cpu(addr_le); - if (!brcmf_sdio_valid_shared_address(addr)) { -- brcmf_err("invalid sdpcm_shared address 0x%08X\n", -- addr); -- return -EINVAL; -+ brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr); -+ rv = -EINVAL; -+ goto fail; - } - -+ brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr); -+ - /* Read hndrte_shared structure */ - rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, - sizeof(struct sdpcm_shared_le)); - if (rv < 0) -- return rv; -+ goto fail; -+ -+ sdio_release_host(bus->sdiodev->func[1]); - - /* Endianness */ - sh->flags = le32_to_cpu(sh_le.flags); -@@ -1121,8 +1124,13 @@ static int brcmf_sdio_readshared(struct - sh->flags & SDPCM_SHARED_VERSION_MASK); - return -EPROTO; - } -- - return 0; -+ -+fail: -+ brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n", -+ rv, addr); -+ sdio_release_host(bus->sdiodev->func[1]); -+ return rv; - } - - static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) diff --git a/package/kernel/mac80211/patches/336-0007-brcmfmac-fix-watchdog-timer-regression.patch b/package/kernel/mac80211/patches/336-0007-brcmfmac-fix-watchdog-timer-regression.patch deleted file mode 100644 index 1b10dbb800..0000000000 --- a/package/kernel/mac80211/patches/336-0007-brcmfmac-fix-watchdog-timer-regression.patch +++ /dev/null @@ -1,59 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 11 Mar 2015 16:11:33 +0100 -Subject: [PATCH] brcmfmac: fix watchdog timer regression - -The watchdog timer is used to put the device in a low-power mode when -it is idle for some time. This timer is stopped during that mode and -should be restarted upon activity. This has been broken by commit -d4150fced0365 ("brcmfmac: Simplify watchdog sleep."). This patch -restores the behaviour as it was before that commit. - -Reported-by: Pontus Fuchs <pontusf@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -972,7 +972,6 @@ static int brcmf_sdio_clkctl(struct brcm - brcmf_sdio_sdclk(bus, true); - /* Now request HT Avail on the backplane */ - brcmf_sdio_htclk(bus, true, pendok); -- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); - break; - - case CLK_SDONLY: -@@ -984,7 +983,6 @@ static int brcmf_sdio_clkctl(struct brcm - else - brcmf_err("request for %d -> %d\n", - bus->clkstate, target); -- brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); - break; - - case CLK_NONE: -@@ -993,7 +991,6 @@ static int brcmf_sdio_clkctl(struct brcm - brcmf_sdio_htclk(bus, false, false); - /* Now remove the SD clock */ - brcmf_sdio_sdclk(bus, false); -- brcmf_sdio_wd_timer(bus, 0); - break; - } - #ifdef DEBUG -@@ -1048,6 +1045,7 @@ end: - brcmf_sdio_clkctl(bus, CLK_NONE, pendok); - } else { - brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok); -+ brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS); - } - bus->sleeping = sleep; - brcmf_dbg(SDIO, "new state %s\n", -@@ -4242,6 +4240,7 @@ void brcmf_sdio_remove(struct brcmf_sdio - if (bus->ci) { - if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) { - sdio_claim_host(bus->sdiodev->func[1]); -+ brcmf_sdio_wd_timer(bus, 0); - brcmf_sdio_clkctl(bus, CLK_AVAIL, false); - /* Leave the device in state where it is - * 'passive'. This is done by resetting all diff --git a/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch b/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch new file mode 100644 index 0000000000..32a2ad6f0b --- /dev/null +++ b/package/kernel/mac80211/patches/336-mac80211-minstrel_ht-set-default-tx-aggregation-time.patch @@ -0,0 +1,31 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Thu, 18 Feb 2016 19:45:33 +0100 +Subject: [PATCH] mac80211: minstrel_ht: set default tx aggregation timeout to + 0 + +The value 5000 was put here with the addition of the timeout field to +ieee80211_start_tx_ba_session. It was originally added in mac80211 to +save resources for drivers like iwlwifi, which only supports a limited +number of concurrent aggregation sessions. + +Since iwlwifi does not use minstrel_ht and other drivers don't need +this, 0 is a better default - especially since there have been +recent reports of aggregation setup related issues reproduced with +ath9k. This should improve stability without causing any adverse +effects. + +Cc: stable@vger.kernel.org +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/net/mac80211/rc80211_minstrel_ht.c ++++ b/net/mac80211/rc80211_minstrel_ht.c +@@ -692,7 +692,7 @@ minstrel_aggr_check(struct ieee80211_sta + if (likely(sta->ampdu_mlme.tid_tx[tid])) + return; + +- ieee80211_start_tx_ba_session(pubsta, tid, 5000); ++ ieee80211_start_tx_ba_session(pubsta, tid, 0); + } + + static void diff --git a/package/kernel/mac80211/patches/337-0001-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch b/package/kernel/mac80211/patches/337-0001-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch deleted file mode 100644 index af76f13ecd..0000000000 --- a/package/kernel/mac80211/patches/337-0001-brcmfmac-avoid-runtime-pm-for-sdio-host-controller.patch +++ /dev/null @@ -1,44 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 18 Mar 2015 13:25:21 +0100 -Subject: [PATCH] brcmfmac: avoid runtime-pm for sdio host controller - -Several host controllers supporting runtime-pm are causing issues -with our sdio wireless cards because they disable the sdio interrupt -upon going into runtime suspend. This patch avoids that by doing -a pm_runtime_forbid() call during the probe. Tested with Sony Vaio -Duo 13 which uses sdhci-acpi host controller. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -@@ -29,6 +29,7 @@ - #include <linux/mmc/host.h> - #include <linux/platform_device.h> - #include <linux/platform_data/brcmfmac-sdio.h> -+#include <linux/pm_runtime.h> - #include <linux/suspend.h> - #include <linux/errno.h> - #include <linux/module.h> -@@ -1006,6 +1007,7 @@ static int brcmf_sdiod_remove(struct brc - sg_free_table(&sdiodev->sgtable); - sdiodev->sbwad = 0; - -+ pm_runtime_allow(sdiodev->func[1]->card->host->parent); - return 0; - } - -@@ -1074,7 +1076,7 @@ static int brcmf_sdiod_probe(struct brcm - ret = -ENODEV; - goto out; - } -- -+ pm_runtime_forbid(host->parent); - out: - if (ret) - brcmf_sdiod_remove(sdiodev); diff --git a/package/kernel/mac80211/patches/337-0002-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch b/package/kernel/mac80211/patches/337-0002-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch deleted file mode 100644 index c419cc68f5..0000000000 --- a/package/kernel/mac80211/patches/337-0002-brcmfmac-Add-necessary-memory-barriers-for-SDIO.patch +++ /dev/null @@ -1,171 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 18 Mar 2015 13:25:22 +0100 -Subject: [PATCH] brcmfmac: Add necessary memory barriers for SDIO. - -SDIO uses a thread to handle all communication with the device, -for this data is exchanged between threads. This data needs proper -memory barriers to make sure that data "exchange" is going correct. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -507,8 +507,8 @@ struct brcmf_sdio { - - struct workqueue_struct *brcmf_wq; - struct work_struct datawork; -- atomic_t dpc_tskcnt; -- atomic_t dpc_running; -+ bool dpc_triggered; -+ bool dpc_running; - - bool txoff; /* Transmit flow-controlled */ - struct brcmf_sdio_count sdcnt; -@@ -2713,6 +2713,7 @@ static void brcmf_sdio_dpc(struct brcmf_ - err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, - bus->ctrl_frame_len); - bus->ctrl_frame_err = err; -+ wmb(); - bus->ctrl_frame_stat = false; - } - sdio_release_host(bus->sdiodev->func[1]); -@@ -2734,6 +2735,7 @@ static void brcmf_sdio_dpc(struct brcmf_ - sdio_claim_host(bus->sdiodev->func[1]); - if (bus->ctrl_frame_stat) { - bus->ctrl_frame_err = -ENODEV; -+ wmb(); - bus->ctrl_frame_stat = false; - brcmf_sdio_wait_event_wakeup(bus); - } -@@ -2744,7 +2746,7 @@ static void brcmf_sdio_dpc(struct brcmf_ - (!atomic_read(&bus->fcstate) && - brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && - data_ok(bus))) { -- atomic_inc(&bus->dpc_tskcnt); -+ bus->dpc_triggered = true; - } - } - -@@ -2940,6 +2942,7 @@ brcmf_sdio_bus_txctl(struct device *dev, - /* Send from dpc */ - bus->ctrl_frame_buf = msg; - bus->ctrl_frame_len = msglen; -+ wmb(); - bus->ctrl_frame_stat = true; - - brcmf_sdio_trigger_dpc(bus); -@@ -2958,6 +2961,7 @@ brcmf_sdio_bus_txctl(struct device *dev, - if (!ret) { - brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n", - bus->ctrl_frame_err); -+ rmb(); - ret = bus->ctrl_frame_err; - } - -@@ -3526,8 +3530,8 @@ done: - - void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus) - { -- if (atomic_read(&bus->dpc_tskcnt) == 0) { -- atomic_inc(&bus->dpc_tskcnt); -+ if (!bus->dpc_triggered) { -+ bus->dpc_triggered = true; - queue_work(bus->brcmf_wq, &bus->datawork); - } - } -@@ -3558,7 +3562,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b - if (!bus->intr) - brcmf_err("isr w/o interrupt configured!\n"); - -- atomic_inc(&bus->dpc_tskcnt); -+ bus->dpc_triggered = true; - queue_work(bus->brcmf_wq, &bus->datawork); - } - -@@ -3578,7 +3582,7 @@ static void brcmf_sdio_bus_watchdog(stru - if (!bus->intr || - (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) { - -- if (atomic_read(&bus->dpc_tskcnt) == 0) { -+ if (!bus->dpc_triggered) { - u8 devpend; - - sdio_claim_host(bus->sdiodev->func[1]); -@@ -3596,7 +3600,7 @@ static void brcmf_sdio_bus_watchdog(stru - bus->sdcnt.pollcnt++; - atomic_set(&bus->ipend, 1); - -- atomic_inc(&bus->dpc_tskcnt); -+ bus->dpc_triggered = true; - queue_work(bus->brcmf_wq, &bus->datawork); - } - } -@@ -3623,17 +3627,21 @@ static void brcmf_sdio_bus_watchdog(stru - #endif /* DEBUG */ - - /* On idle timeout clear activity flag and/or turn off clock */ -- if ((atomic_read(&bus->dpc_tskcnt) == 0) && -- (atomic_read(&bus->dpc_running) == 0) && -- (bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) { -- bus->idlecount++; -- if (bus->idlecount > bus->idletime) { -- brcmf_dbg(SDIO, "idle\n"); -- sdio_claim_host(bus->sdiodev->func[1]); -- brcmf_sdio_wd_timer(bus, 0); -+ if (!bus->dpc_triggered) { -+ rmb(); -+ if ((!bus->dpc_running) && (bus->idletime > 0) && -+ (bus->clkstate == CLK_AVAIL)) { -+ bus->idlecount++; -+ if (bus->idlecount > bus->idletime) { -+ brcmf_dbg(SDIO, "idle\n"); -+ sdio_claim_host(bus->sdiodev->func[1]); -+ brcmf_sdio_wd_timer(bus, 0); -+ bus->idlecount = 0; -+ brcmf_sdio_bus_sleep(bus, true, false); -+ sdio_release_host(bus->sdiodev->func[1]); -+ } -+ } else { - bus->idlecount = 0; -- brcmf_sdio_bus_sleep(bus, true, false); -- sdio_release_host(bus->sdiodev->func[1]); - } - } else { - bus->idlecount = 0; -@@ -3645,13 +3653,14 @@ static void brcmf_sdio_dataworker(struct - struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio, - datawork); - -- while (atomic_read(&bus->dpc_tskcnt)) { -- atomic_set(&bus->dpc_running, 1); -- atomic_set(&bus->dpc_tskcnt, 0); -+ bus->dpc_running = true; -+ wmb(); -+ while (ACCESS_ONCE(bus->dpc_triggered)) { -+ bus->dpc_triggered = false; - brcmf_sdio_dpc(bus); - bus->idlecount = 0; -- atomic_set(&bus->dpc_running, 0); - } -+ bus->dpc_running = false; - if (brcmf_sdiod_freezing(bus->sdiodev)) { - brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN); - brcmf_sdiod_try_freeze(bus->sdiodev); -@@ -4144,8 +4153,8 @@ struct brcmf_sdio *brcmf_sdio_probe(stru - bus->watchdog_tsk = NULL; - } - /* Initialize DPC thread */ -- atomic_set(&bus->dpc_tskcnt, 0); -- atomic_set(&bus->dpc_running, 0); -+ bus->dpc_triggered = false; -+ bus->dpc_running = false; - - /* Assign bus interface call back */ - bus->sdiodev->bus_if->dev = bus->sdiodev->dev; diff --git a/package/kernel/mac80211/patches/337-0003-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch b/package/kernel/mac80211/patches/337-0003-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch deleted file mode 100644 index 1bc98a053e..0000000000 --- a/package/kernel/mac80211/patches/337-0003-brcmfmac-Remove-unnecessary-new-line-in-pcie-console.patch +++ /dev/null @@ -1,26 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 18 Mar 2015 13:25:24 +0100 -Subject: [PATCH] brcmfmac: Remove unnecessary new-line in pcie console - logging. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -651,10 +651,9 @@ static void brcmf_pcie_bus_console_read( - console->log_str[console->log_idx] = ch; - console->log_idx++; - } -- - if (ch == '\n') { - console->log_str[console->log_idx] = 0; -- brcmf_dbg(PCIE, "CONSOLE: %s\n", console->log_str); -+ brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str); - console->log_idx = 0; - } - } diff --git a/package/kernel/mac80211/patches/337-0004-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch b/package/kernel/mac80211/patches/337-0004-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch deleted file mode 100644 index fcf0bf34f0..0000000000 --- a/package/kernel/mac80211/patches/337-0004-brcmfmac-add-MODULE_FIRMWARE-macros-for-bcm4356-PCIe.patch +++ /dev/null @@ -1,26 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 18 Mar 2015 13:25:25 +0100 -Subject: [PATCH] brcmfmac: add MODULE_FIRMWARE() macros for bcm4356 PCIe - device - -The BCM4356 PCIe wireless device was added recently but overlooked -the fact that the MODULE_FIRMWARE() macros were missing for the -firmwares needed by this device. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -189,6 +189,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME - MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4354_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4354_NVRAM_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME); - diff --git a/package/kernel/mac80211/patches/337-0005-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch b/package/kernel/mac80211/patches/337-0005-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch deleted file mode 100644 index b3e9bc9a07..0000000000 --- a/package/kernel/mac80211/patches/337-0005-brcmfmac-add-support-for-BCM43430-SDIO-chipset.patch +++ /dev/null @@ -1,138 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 18 Mar 2015 13:25:26 +0100 -Subject: [PATCH] brcmfmac: add support for BCM43430 SDIO chipset - -This patch added support for the BCM43430 802.11n SDIO chipset. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -@@ -1098,6 +1098,7 @@ static const struct sdio_device_id brcmf - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43341), - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43362), - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339), -+ BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430), - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345), - BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354), - { /* end: all zeroes */ } ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -600,6 +600,12 @@ static void brcmf_chip_socram_ramsize(st - if (sr->chip->pub.chiprev < 2) - *srsize = (32 * 1024); - break; -+ case BRCM_CC_43430_CHIP_ID: -+ /* assume sr for now as we can not check -+ * firmware sr capability at this point. -+ */ -+ *srsize = (64 * 1024); -+ break; - default: - break; - } -@@ -1072,6 +1078,7 @@ static void - brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip) - { - struct brcmf_core *core; -+ struct brcmf_core_priv *sr; - - brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CM3); - core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211); -@@ -1081,6 +1088,13 @@ brcmf_chip_cm3_set_passive(struct brcmf_ - D11_BCMA_IOCTL_PHYCLOCKEN); - core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_INTERNAL_MEM); - brcmf_chip_resetcore(core, 0, 0, 0); -+ -+ /* disable bank #3 remap for this device */ -+ if (chip->pub.chip == BRCM_CC_43430_CHIP_ID) { -+ sr = container_of(core, struct brcmf_core_priv, pub); -+ brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankidx), 3); -+ brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankpda), 0); -+ } - } - - static bool brcmf_chip_cm3_set_active(struct brcmf_chip_priv *chip) -@@ -1188,6 +1202,10 @@ bool brcmf_chip_sr_capable(struct brcmf_ - addr = CORE_CC_REG(base, chipcontrol_data); - reg = chip->ops->read32(chip->ctx, addr); - return (reg & pmu_cc3_mask) != 0; -+ case BRCM_CC_43430_CHIP_ID: -+ addr = CORE_CC_REG(base, sr_control1); -+ reg = chip->ops->read32(chip->ctx, addr); -+ return reg != 0; - default: - addr = CORE_CC_REG(base, pmucapabilities_ext); - reg = chip->ops->read32(chip->ctx, addr); ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -615,6 +615,8 @@ static const struct sdiod_drive_str sdio - #define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt" - #define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin" - #define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt" -+#define BCM43430_FIRMWARE_NAME "brcm/brcmfmac43430-sdio.bin" -+#define BCM43430_NVRAM_NAME "brcm/brcmfmac43430-sdio.txt" - #define BCM4345_FIRMWARE_NAME "brcm/brcmfmac4345-sdio.bin" - #define BCM4345_NVRAM_NAME "brcm/brcmfmac4345-sdio.txt" - #define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin" -@@ -640,6 +642,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM43362_NVRAM_NAME); - MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM4339_NVRAM_NAME); -+MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME); -+MODULE_FIRMWARE(BCM43430_NVRAM_NAME); - MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM4345_NVRAM_NAME); - MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME); -@@ -671,6 +675,7 @@ static const struct brcmf_firmware_names - { BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, - { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, - { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }, -+ { BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) }, - { BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) }, - { BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) } - }; ---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -@@ -37,6 +37,7 @@ - #define BRCM_CC_43362_CHIP_ID 43362 - #define BRCM_CC_4335_CHIP_ID 0x4335 - #define BRCM_CC_4339_CHIP_ID 0x4339 -+#define BRCM_CC_43430_CHIP_ID 43430 - #define BRCM_CC_4345_CHIP_ID 0x4345 - #define BRCM_CC_4354_CHIP_ID 0x4354 - #define BRCM_CC_4356_CHIP_ID 0x4356 ---- a/drivers/net/wireless/brcm80211/include/chipcommon.h -+++ b/drivers/net/wireless/brcm80211/include/chipcommon.h -@@ -183,7 +183,14 @@ struct chipcregs { - u8 uart1lsr; - u8 uart1msr; - u8 uart1scratch; -- u32 PAD[126]; -+ u32 PAD[62]; -+ -+ /* save/restore, corerev >= 48 */ -+ u32 sr_capability; /* 0x500 */ -+ u32 sr_control0; /* 0x504 */ -+ u32 sr_control1; /* 0x508 */ -+ u32 gpio_control; /* 0x50C */ -+ u32 PAD[60]; - - /* PMU registers (corerev >= 20) */ - u32 pmucontrol; /* 0x600 */ ---- a/include/linux/mmc/sdio_ids.h -+++ b/include/linux/mmc/sdio_ids.h -@@ -33,6 +33,7 @@ - #define SDIO_DEVICE_ID_BROADCOM_43341 0xa94d - #define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335 - #define SDIO_DEVICE_ID_BROADCOM_43362 0xa962 -+#define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6 - #define SDIO_DEVICE_ID_BROADCOM_4345 0x4345 - #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354 - diff --git a/package/kernel/mac80211/patches/337-0006-brcmfmac-only-support-the-BCM43455-7-device.patch b/package/kernel/mac80211/patches/337-0006-brcmfmac-only-support-the-BCM43455-7-device.patch deleted file mode 100644 index c3d7bc2cbf..0000000000 --- a/package/kernel/mac80211/patches/337-0006-brcmfmac-only-support-the-BCM43455-7-device.patch +++ /dev/null @@ -1,50 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 18 Mar 2015 13:25:27 +0100 -Subject: [PATCH] brcmfmac: only support the BCM43455/7 device - -Recently support was added for the BCM4345 SDIO chipset by -commit 9c51026509d7 ("brcmfmac: Add support for BCM4345 SDIO chipset") -however this was verified using a BCM43455 device, which is -a more recent revision of the chip. This patch assure that -older revisions are not probed as they would fail. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Syed Asifful Dayyan <syedd@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -617,8 +617,8 @@ static const struct sdiod_drive_str sdio - #define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt" - #define BCM43430_FIRMWARE_NAME "brcm/brcmfmac43430-sdio.bin" - #define BCM43430_NVRAM_NAME "brcm/brcmfmac43430-sdio.txt" --#define BCM4345_FIRMWARE_NAME "brcm/brcmfmac4345-sdio.bin" --#define BCM4345_NVRAM_NAME "brcm/brcmfmac4345-sdio.txt" -+#define BCM43455_FIRMWARE_NAME "brcm/brcmfmac43455-sdio.bin" -+#define BCM43455_NVRAM_NAME "brcm/brcmfmac43455-sdio.txt" - #define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin" - #define BCM4354_NVRAM_NAME "brcm/brcmfmac4354-sdio.txt" - -@@ -644,8 +644,8 @@ MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM4339_NVRAM_NAME); - MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM43430_NVRAM_NAME); --MODULE_FIRMWARE(BCM4345_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM4345_NVRAM_NAME); -+MODULE_FIRMWARE(BCM43455_FIRMWARE_NAME); -+MODULE_FIRMWARE(BCM43455_NVRAM_NAME); - MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM4354_NVRAM_NAME); - -@@ -676,7 +676,7 @@ static const struct brcmf_firmware_names - { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, - { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }, - { BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) }, -- { BRCM_CC_4345_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4345) }, -+ { BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43455) }, - { BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) } - }; - diff --git a/package/kernel/mac80211/patches/337-0007-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch b/package/kernel/mac80211/patches/337-0007-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch deleted file mode 100644 index a62cfdfc4c..0000000000 --- a/package/kernel/mac80211/patches/337-0007-brcmfmac-remove-support-for-unreleased-BCM4354-PCIe.patch +++ /dev/null @@ -1,52 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 18 Mar 2015 13:25:28 +0100 -Subject: [PATCH] brcmfmac: remove support for unreleased BCM4354 PCIe - -There are no known BCM4354 PCIe devices released so removing -support from the driver until proven otherwise. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -47,8 +47,6 @@ enum brcmf_pcie_state { - - #define BRCMF_PCIE_43602_FW_NAME "brcm/brcmfmac43602-pcie.bin" - #define BRCMF_PCIE_43602_NVRAM_NAME "brcm/brcmfmac43602-pcie.txt" --#define BRCMF_PCIE_4354_FW_NAME "brcm/brcmfmac4354-pcie.bin" --#define BRCMF_PCIE_4354_NVRAM_NAME "brcm/brcmfmac4354-pcie.txt" - #define BRCMF_PCIE_4356_FW_NAME "brcm/brcmfmac4356-pcie.bin" - #define BRCMF_PCIE_4356_NVRAM_NAME "brcm/brcmfmac4356-pcie.txt" - #define BRCMF_PCIE_43570_FW_NAME "brcm/brcmfmac43570-pcie.bin" -@@ -187,8 +185,6 @@ enum brcmf_pcie_state { - - MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4354_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4354_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME); -@@ -1327,10 +1323,6 @@ static int brcmf_pcie_get_fwnames(struct - fw_name = BRCMF_PCIE_43602_FW_NAME; - nvram_name = BRCMF_PCIE_43602_NVRAM_NAME; - break; -- case BRCM_CC_4354_CHIP_ID: -- fw_name = BRCMF_PCIE_4354_FW_NAME; -- nvram_name = BRCMF_PCIE_4354_NVRAM_NAME; -- break; - case BRCM_CC_4356_CHIP_ID: - fw_name = BRCMF_PCIE_4356_FW_NAME; - nvram_name = BRCMF_PCIE_4356_NVRAM_NAME; -@@ -1855,7 +1847,6 @@ cleanup: - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 } - - static struct pci_device_id brcmf_pcie_devid_table[] = { -- BRCMF_PCIE_DEVICE(BRCM_PCIE_4354_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID), diff --git a/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch b/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch new file mode 100644 index 0000000000..229351ba56 --- /dev/null +++ b/package/kernel/mac80211/patches/337-mac80211-minstrel_ht-fix-a-logic-error-in-RTS-CTS-ha.patch @@ -0,0 +1,26 @@ +From: Felix Fietkau <nbd@openwrt.org> +Date: Wed, 24 Feb 2016 12:03:13 +0100 +Subject: [PATCH] mac80211: minstrel_ht: fix a logic error in RTS/CTS handling +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +RTS/CTS needs to be enabled if the rate is a fallback rate *or* if it's +a dual-stream rate and the sta is in dynamic SMPS mode. + +Fixes: a3ebb4e1b763 ("mac80211: minstrel_ht: handle peers in dynamic SMPS") +Reported-by: MatÃas Richart <mrichart@fing.edu.uy> +Signed-off-by: Felix Fietkau <nbd@openwrt.org> +--- + +--- a/net/mac80211/rc80211_minstrel_ht.c ++++ b/net/mac80211/rc80211_minstrel_ht.c +@@ -872,7 +872,7 @@ minstrel_ht_set_rate(struct minstrel_pri + * - if station is in dynamic SMPS (and streams > 1) + * - for fallback rates, to increase chances of getting through + */ +- if (offset > 0 && ++ if (offset > 0 || + (mi->sta->smps_mode == IEEE80211_SMPS_DYNAMIC && + group->streams > 1)) { + ratetbl->rate[offset].count = ratetbl->rate[offset].count_rts; diff --git a/package/kernel/mac80211/patches/338-brcmfmac-disable-MBSS-feature-for-BCM43362.patch b/package/kernel/mac80211/patches/338-brcmfmac-disable-MBSS-feature-for-BCM43362.patch deleted file mode 100644 index 366ff85d03..0000000000 --- a/package/kernel/mac80211/patches/338-brcmfmac-disable-MBSS-feature-for-BCM43362.patch +++ /dev/null @@ -1,28 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Fri, 20 Mar 2015 22:18:17 +0100 -Subject: [PATCH] brcmfmac: disable MBSS feature for BCM43362 - -The BCM43362 firmware falsely reports it is capable of providing -MBSS. As a result AP mode no longer works for this device. Therefor -disable MBSS in the driver for this chipset. - -Cc: stable@vger.kernel.org # 3.19.y -Reported-by: Jorg Krause <jkrause@posteo.de> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c -@@ -126,7 +126,8 @@ void brcmf_feat_attach(struct brcmf_pub - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan"); - if (drvr->bus_if->wowl_supported) - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl"); -- brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0); -+ if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID) -+ brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0); - - /* set chip related quirks */ - switch (drvr->bus_if->chip) { diff --git a/package/kernel/mac80211/patches/339-0001-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch b/package/kernel/mac80211/patches/339-0001-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch deleted file mode 100644 index 6e461f617f..0000000000 --- a/package/kernel/mac80211/patches/339-0001-brcmfmac-use-static-superset-of-channels-for-wiphy-b.patch +++ /dev/null @@ -1,300 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:24 +0200 -Subject: [PATCH] brcmfmac: use static superset of channels for wiphy - bands - -The driver was constructing a list of channels per wiphy band -by querying the device. This list is not what the hardware is -able to do as it is already filtered by the country setting in -the device. As user-space may change the country this would -require updating the channel list which is not recommended [1]. -This patch introduces a superset of channels. The individual -channels are disabled appropriately by querying the device. - -[1] http://mid.gmane.org/1426706320.3001.21.camel@sipsolutions.net - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -129,13 +129,47 @@ static struct ieee80211_rate __wl_rates[ - RATETAB_ENT(BRCM_RATE_54M, 0), - }; - --#define wl_a_rates (__wl_rates + 4) --#define wl_a_rates_size 8 - #define wl_g_rates (__wl_rates + 0) --#define wl_g_rates_size 12 -+#define wl_g_rates_size ARRAY_SIZE(__wl_rates) -+#define wl_a_rates (__wl_rates + 4) -+#define wl_a_rates_size (wl_g_rates_size - 4) -+ -+#define CHAN2G(_channel, _freq) { \ -+ .band = IEEE80211_BAND_2GHZ, \ -+ .center_freq = (_freq), \ -+ .hw_value = (_channel), \ -+ .flags = IEEE80211_CHAN_DISABLED, \ -+ .max_antenna_gain = 0, \ -+ .max_power = 30, \ -+} -+ -+#define CHAN5G(_channel) { \ -+ .band = IEEE80211_BAND_5GHZ, \ -+ .center_freq = 5000 + (5 * (_channel)), \ -+ .hw_value = (_channel), \ -+ .flags = IEEE80211_CHAN_DISABLED, \ -+ .max_antenna_gain = 0, \ -+ .max_power = 30, \ -+} -+ -+static struct ieee80211_channel __wl_2ghz_channels[] = { -+ CHAN2G(1, 2412), CHAN2G(2, 2417), CHAN2G(3, 2422), CHAN2G(4, 2427), -+ CHAN2G(5, 2432), CHAN2G(6, 2437), CHAN2G(7, 2442), CHAN2G(8, 2447), -+ CHAN2G(9, 2452), CHAN2G(10, 2457), CHAN2G(11, 2462), CHAN2G(12, 2467), -+ CHAN2G(13, 2472), CHAN2G(14, 2484) -+}; -+ -+static struct ieee80211_channel __wl_5ghz_channels[] = { -+ CHAN5G(34), CHAN5G(36), CHAN5G(38), CHAN5G(40), CHAN5G(42), -+ CHAN5G(44), CHAN5G(46), CHAN5G(48), CHAN5G(52), CHAN5G(56), -+ CHAN5G(60), CHAN5G(64), CHAN5G(100), CHAN5G(104), CHAN5G(108), -+ CHAN5G(112), CHAN5G(116), CHAN5G(120), CHAN5G(124), CHAN5G(128), -+ CHAN5G(132), CHAN5G(136), CHAN5G(140), CHAN5G(144), CHAN5G(149), -+ CHAN5G(153), CHAN5G(157), CHAN5G(161), CHAN5G(165) -+}; - - /* Band templates duplicated per wiphy. The channel info -- * is filled in after querying the device. -+ * above is added to the band during setup. - */ - static const struct ieee80211_supported_band __wl_band_2ghz = { - .band = IEEE80211_BAND_2GHZ, -@@ -143,7 +177,7 @@ static const struct ieee80211_supported_ - .n_bitrates = wl_g_rates_size, - }; - --static const struct ieee80211_supported_band __wl_band_5ghz_a = { -+static const struct ieee80211_supported_band __wl_band_5ghz = { - .band = IEEE80211_BAND_5GHZ, - .bitrates = wl_a_rates, - .n_bitrates = wl_a_rates_size, -@@ -5252,40 +5286,6 @@ dongle_scantime_out: - return err; - } - --/* Filter the list of channels received from firmware counting only -- * the 20MHz channels. The wiphy band data only needs those which get -- * flagged to indicate if they can take part in higher bandwidth. -- */ --static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg, -- struct brcmf_chanspec_list *chlist, -- u32 chcnt[]) --{ -- u32 total = le32_to_cpu(chlist->count); -- struct brcmu_chan ch; -- int i; -- -- for (i = 0; i < total; i++) { -- ch.chspec = (u16)le32_to_cpu(chlist->element[i]); -- cfg->d11inf.decchspec(&ch); -- -- /* Firmware gives a ordered list. We skip non-20MHz -- * channels is 2G. For 5G we can abort upon reaching -- * a non-20MHz channel in the list. -- */ -- if (ch.bw != BRCMU_CHAN_BW_20) { -- if (ch.band == BRCMU_CHAN_BAND_5G) -- break; -- else -- continue; -- } -- -- if (ch.band == BRCMU_CHAN_BAND_2G) -- chcnt[0] += 1; -- else if (ch.band == BRCMU_CHAN_BAND_5G) -- chcnt[1] += 1; -- } --} -- - static void brcmf_update_bw40_channel_flag(struct ieee80211_channel *channel, - struct brcmu_chan *ch) - { -@@ -5321,7 +5321,6 @@ static int brcmf_construct_chaninfo(stru - u32 i, j; - u32 total; - u32 chaninfo; -- u32 chcnt[2] = { 0, 0 }; - u32 index; - - pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL); -@@ -5338,42 +5337,15 @@ static int brcmf_construct_chaninfo(stru - goto fail_pbuf; - } - -- brcmf_count_20mhz_channels(cfg, list, chcnt); - wiphy = cfg_to_wiphy(cfg); -- if (chcnt[0]) { -- band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz), -- GFP_KERNEL); -- if (band == NULL) { -- err = -ENOMEM; -- goto fail_pbuf; -- } -- band->channels = kcalloc(chcnt[0], sizeof(*channel), -- GFP_KERNEL); -- if (band->channels == NULL) { -- kfree(band); -- err = -ENOMEM; -- goto fail_pbuf; -- } -- band->n_channels = 0; -- wiphy->bands[IEEE80211_BAND_2GHZ] = band; -- } -- if (chcnt[1]) { -- band = kmemdup(&__wl_band_5ghz_a, sizeof(__wl_band_5ghz_a), -- GFP_KERNEL); -- if (band == NULL) { -- err = -ENOMEM; -- goto fail_band2g; -- } -- band->channels = kcalloc(chcnt[1], sizeof(*channel), -- GFP_KERNEL); -- if (band->channels == NULL) { -- kfree(band); -- err = -ENOMEM; -- goto fail_band2g; -- } -- band->n_channels = 0; -- wiphy->bands[IEEE80211_BAND_5GHZ] = band; -- } -+ band = wiphy->bands[IEEE80211_BAND_2GHZ]; -+ if (band) -+ for (i = 0; i < band->n_channels; i++) -+ band->channels[i].flags = IEEE80211_CHAN_DISABLED; -+ band = wiphy->bands[IEEE80211_BAND_5GHZ]; -+ if (band) -+ for (i = 0; i < band->n_channels; i++) -+ band->channels[i].flags = IEEE80211_CHAN_DISABLED; - - total = le32_to_cpu(list->count); - for (i = 0; i < total; i++) { -@@ -5388,6 +5360,8 @@ static int brcmf_construct_chaninfo(stru - brcmf_err("Invalid channel Spec. 0x%x.\n", ch.chspec); - continue; - } -+ if (!band) -+ continue; - if (!(bw_cap[band->band] & WLC_BW_40MHZ_BIT) && - ch.bw == BRCMU_CHAN_BW_40) - continue; -@@ -5415,9 +5389,9 @@ static int brcmf_construct_chaninfo(stru - } else if (ch.bw == BRCMU_CHAN_BW_40) { - brcmf_update_bw40_channel_flag(&channel[index], &ch); - } else { -- /* disable other bandwidths for now as mentioned -- * order assure they are enabled for subsequent -- * chanspecs. -+ /* enable the channel and disable other bandwidths -+ * for now as mentioned order assure they are enabled -+ * for subsequent chanspecs. - */ - channel[index].flags = IEEE80211_CHAN_NO_HT40 | - IEEE80211_CHAN_NO_80MHZ; -@@ -5436,16 +5410,8 @@ static int brcmf_construct_chaninfo(stru - IEEE80211_CHAN_NO_IR; - } - } -- if (index == band->n_channels) -- band->n_channels++; - } -- kfree(pbuf); -- return 0; - --fail_band2g: -- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels); -- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]); -- wiphy->bands[IEEE80211_BAND_2GHZ] = NULL; - fail_pbuf: - kfree(pbuf); - return err; -@@ -5778,7 +5744,12 @@ static void brcmf_wiphy_wowl_params(stru - - static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp) - { -+ struct ieee80211_supported_band *band; - struct ieee80211_iface_combination ifc_combo; -+ __le32 bandlist[3]; -+ u32 n_bands; -+ int err, i; -+ - wiphy->max_scan_ssids = WL_NUM_SCAN_MAX; - wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX; - wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX; -@@ -5820,7 +5791,52 @@ static int brcmf_setup_wiphy(struct wiph - if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL)) - brcmf_wiphy_wowl_params(wiphy); - -- return brcmf_setup_wiphybands(wiphy); -+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist, -+ sizeof(bandlist)); -+ if (err) { -+ brcmf_err("could not obtain band info: err=%d\n", err); -+ return err; -+ } -+ /* first entry in bandlist is number of bands */ -+ n_bands = le32_to_cpu(bandlist[0]); -+ for (i = 1; i <= n_bands && i < ARRAY_SIZE(bandlist); i++) { -+ if (bandlist[i] == cpu_to_le32(WLC_BAND_2G)) { -+ band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz), -+ GFP_KERNEL); -+ if (!band) -+ return -ENOMEM; -+ -+ band->channels = kmemdup(&__wl_2ghz_channels, -+ sizeof(__wl_2ghz_channels), -+ GFP_KERNEL); -+ if (!band->channels) { -+ kfree(band); -+ return -ENOMEM; -+ } -+ -+ band->n_channels = ARRAY_SIZE(__wl_2ghz_channels); -+ wiphy->bands[IEEE80211_BAND_2GHZ] = band; -+ } -+ if (bandlist[i] == cpu_to_le32(WLC_BAND_5G)) { -+ band = kmemdup(&__wl_band_5ghz, sizeof(__wl_band_5ghz), -+ GFP_KERNEL); -+ if (!band) -+ return -ENOMEM; -+ -+ band->channels = kmemdup(&__wl_5ghz_channels, -+ sizeof(__wl_5ghz_channels), -+ GFP_KERNEL); -+ if (!band->channels) { -+ kfree(band); -+ return -ENOMEM; -+ } -+ -+ band->n_channels = ARRAY_SIZE(__wl_5ghz_channels); -+ wiphy->bands[IEEE80211_BAND_5GHZ] = band; -+ } -+ } -+ err = brcmf_setup_wiphybands(wiphy); -+ return err; - } - - static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) -@@ -6011,6 +6027,9 @@ static void brcmf_cfg80211_reg_notifier( - - static void brcmf_free_wiphy(struct wiphy *wiphy) - { -+ if (!wiphy) -+ return; -+ - kfree(wiphy->iface_combinations); - if (wiphy->bands[IEEE80211_BAND_2GHZ]) { - kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels); diff --git a/package/kernel/mac80211/patches/339-0002-brcmfmac-update-wiphy-band-information-upon-updating.patch b/package/kernel/mac80211/patches/339-0002-brcmfmac-update-wiphy-band-information-upon-updating.patch deleted file mode 100644 index a0c22eb411..0000000000 --- a/package/kernel/mac80211/patches/339-0002-brcmfmac-update-wiphy-band-information-upon-updating.patch +++ /dev/null @@ -1,29 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:25 +0200 -Subject: [PATCH] brcmfmac: update wiphy band information upon updating - regulatory domain - -When change the country code the available channels may change. So -the wiphy bands should be updated accordingly. - -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -6022,7 +6022,11 @@ static void brcmf_cfg80211_reg_notifier( - memset(&ccreq, 0, sizeof(ccreq)); - ccreq.rev = cpu_to_le32(-1); - memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2)); -- brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq)); -+ if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) { -+ brcmf_err("firmware rejected country setting\n"); -+ return; -+ } -+ brcmf_setup_wiphybands(wiphy); - } - - static void brcmf_free_wiphy(struct wiphy *wiphy) diff --git a/package/kernel/mac80211/patches/339-0003-brcmfmac-add-description-for-feature-flags.patch b/package/kernel/mac80211/patches/339-0003-brcmfmac-add-description-for-feature-flags.patch deleted file mode 100644 index 193f507d0d..0000000000 --- a/package/kernel/mac80211/patches/339-0003-brcmfmac-add-description-for-feature-flags.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:26 +0200 -Subject: [PATCH] brcmfmac: add description for feature flags - -Some feature flags were not described in the header file. Adding -the description. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h -@@ -19,7 +19,9 @@ - /* - * Features: - * -+ * MBSS: multiple BSSID support (eg. guest network in AP mode). - * MCHAN: multi-channel for concurrent P2P. -+ * WOWL: Wake-On-WLAN. - */ - #define BRCMF_FEAT_LIST \ - BRCMF_FEAT_DEF(MBSS) \ diff --git a/package/kernel/mac80211/patches/339-0004-brcmfmac-make-scheduled-scan-support-conditional.patch b/package/kernel/mac80211/patches/339-0004-brcmfmac-make-scheduled-scan-support-conditional.patch deleted file mode 100644 index 42330b474e..0000000000 --- a/package/kernel/mac80211/patches/339-0004-brcmfmac-make-scheduled-scan-support-conditional.patch +++ /dev/null @@ -1,51 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:27 +0200 -Subject: [PATCH] brcmfmac: make scheduled scan support conditional - -The scheduled scan support depends on firmware supporting the PNO -feature. This feature is optional so add a feature flag for this -in the driver and announce scheduled scan support accordingly. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -5782,7 +5782,8 @@ static int brcmf_setup_wiphy(struct wiph - wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM; - wiphy->mgmt_stypes = brcmf_txrx_stypes; - wiphy->max_remain_on_channel_duration = 5000; -- brcmf_wiphy_pno_params(wiphy); -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) -+ brcmf_wiphy_pno_params(wiphy); - - /* vendor commands/events support */ - wiphy->vendor_commands = brcmf_vendor_cmds; ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c -@@ -124,6 +124,7 @@ void brcmf_feat_attach(struct brcmf_pub - struct brcmf_if *ifp = drvr->iflist[0]; - - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan"); -+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn"); - if (drvr->bus_if->wowl_supported) - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl"); - if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID) ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h -@@ -21,11 +21,13 @@ - * - * MBSS: multiple BSSID support (eg. guest network in AP mode). - * MCHAN: multi-channel for concurrent P2P. -+ * PNO: preferred network offload. - * WOWL: Wake-On-WLAN. - */ - #define BRCMF_FEAT_LIST \ - BRCMF_FEAT_DEF(MBSS) \ - BRCMF_FEAT_DEF(MCHAN) \ -+ BRCMF_FEAT_DEF(PNO) \ - BRCMF_FEAT_DEF(WOWL) - /* - * Quirks: diff --git a/package/kernel/mac80211/patches/339-0005-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch b/package/kernel/mac80211/patches/339-0005-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch deleted file mode 100644 index b859d46894..0000000000 --- a/package/kernel/mac80211/patches/339-0005-brcmfmac-add-support-for-BCM4324-rev-B5-chipset.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:28 +0200 -Subject: [PATCH] brcmfmac: add support for BCM4324 rev B5 chipset - -This patch adds support for the BCM4324 B5 revision. This device -is similar to BCM43241 from driver and firmware perspective. It -is known to be used in Lenovo Thinkpad Tablet devices. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -601,6 +601,8 @@ static const struct sdiod_drive_str sdio - #define BCM43241B0_NVRAM_NAME "brcm/brcmfmac43241b0-sdio.txt" - #define BCM43241B4_FIRMWARE_NAME "brcm/brcmfmac43241b4-sdio.bin" - #define BCM43241B4_NVRAM_NAME "brcm/brcmfmac43241b4-sdio.txt" -+#define BCM43241B5_FIRMWARE_NAME "brcm/brcmfmac43241b5-sdio.bin" -+#define BCM43241B5_NVRAM_NAME "brcm/brcmfmac43241b5-sdio.txt" - #define BCM4329_FIRMWARE_NAME "brcm/brcmfmac4329-sdio.bin" - #define BCM4329_NVRAM_NAME "brcm/brcmfmac4329-sdio.txt" - #define BCM4330_FIRMWARE_NAME "brcm/brcmfmac4330-sdio.bin" -@@ -628,6 +630,8 @@ MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME - MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME); - MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME); -+MODULE_FIRMWARE(BCM43241B5_FIRMWARE_NAME); -+MODULE_FIRMWARE(BCM43241B5_NVRAM_NAME); - MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME); - MODULE_FIRMWARE(BCM4329_NVRAM_NAME); - MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME); -@@ -667,7 +671,8 @@ enum brcmf_firmware_type { - static const struct brcmf_firmware_names brcmf_fwname_data[] = { - { BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) }, - { BRCM_CC_43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) }, -- { BRCM_CC_43241_CHIP_ID, 0xFFFFFFE0, BRCMF_FIRMWARE_NVRAM(BCM43241B4) }, -+ { BRCM_CC_43241_CHIP_ID, 0x00000020, BRCMF_FIRMWARE_NVRAM(BCM43241B4) }, -+ { BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43241B5) }, - { BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) }, - { BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) }, - { BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, diff --git a/package/kernel/mac80211/patches/339-0006-brcmfmac-process-interrupt-regardless-sdiod-state.patch b/package/kernel/mac80211/patches/339-0006-brcmfmac-process-interrupt-regardless-sdiod-state.patch deleted file mode 100644 index d420308383..0000000000 --- a/package/kernel/mac80211/patches/339-0006-brcmfmac-process-interrupt-regardless-sdiod-state.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:29 +0200 -Subject: [PATCH] brcmfmac: process interrupt regardless sdiod state - -When the sdio bus state is not ready to process we abort the -interrupt service routine. This is not wanted as it keeps the -interrupt source active. Better clear the interrupt source. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -3555,10 +3555,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *b - return; - } - -- if (bus->sdiodev->state != BRCMF_SDIOD_DATA) { -- brcmf_err("bus is down. we have nothing to do\n"); -- return; -- } - /* Count the interrupt call */ - bus->sdcnt.intrcount++; - if (in_interrupt()) diff --git a/package/kernel/mac80211/patches/339-0007-brcmfmac-fix-sdio-suspend-and-resume.patch b/package/kernel/mac80211/patches/339-0007-brcmfmac-fix-sdio-suspend-and-resume.patch deleted file mode 100644 index ac5584ec3c..0000000000 --- a/package/kernel/mac80211/patches/339-0007-brcmfmac-fix-sdio-suspend-and-resume.patch +++ /dev/null @@ -1,68 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:30 +0200 -Subject: [PATCH] brcmfmac: fix sdio suspend and resume - -commit 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.") -changed the behaviour by removing the MMC_PM_KEEP_POWER flag for -non-wowl scenario, which needs to be restored. Another necessary -change is to mark the card as being non-removable. With this in place -the suspend resume test passes successfully doing: - - # echo devices > /sys/power/pm_test - # echo mem > /sys/power/state - -Note that power may still be switched off when system is going -in S3 state. - -Reported-by: Fu, Zhonghui <<zhonghui.fu@linux.intel.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -@@ -1011,6 +1011,14 @@ static int brcmf_sdiod_remove(struct brc - return 0; - } - -+static void brcmf_sdiod_host_fixup(struct mmc_host *host) -+{ -+ /* runtime-pm powers off the device */ -+ pm_runtime_forbid(host->parent); -+ /* avoid removal detection upon resume */ -+ host->caps |= MMC_CAP_NONREMOVABLE; -+} -+ - static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev) - { - struct sdio_func *func; -@@ -1076,7 +1084,7 @@ static int brcmf_sdiod_probe(struct brcm - ret = -ENODEV; - goto out; - } -- pm_runtime_forbid(host->parent); -+ brcmf_sdiod_host_fixup(host); - out: - if (ret) - brcmf_sdiod_remove(sdiodev); -@@ -1246,15 +1254,15 @@ static int brcmf_ops_sdio_suspend(struct - brcmf_sdiod_freezer_on(sdiodev); - brcmf_sdio_wd_timer(sdiodev->bus, 0); - -+ sdio_flags = MMC_PM_KEEP_POWER; - if (sdiodev->wowl_enabled) { -- sdio_flags = MMC_PM_KEEP_POWER; - if (sdiodev->pdata->oob_irq_supported) - enable_irq_wake(sdiodev->pdata->oob_irq_nr); - else -- sdio_flags = MMC_PM_WAKE_SDIO_IRQ; -- if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags)) -- brcmf_err("Failed to set pm_flags %x\n", sdio_flags); -+ sdio_flags |= MMC_PM_WAKE_SDIO_IRQ; - } -+ if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags)) -+ brcmf_err("Failed to set pm_flags %x\n", sdio_flags); - return 0; - } - diff --git a/package/kernel/mac80211/patches/339-0008-brcmfmac-add-support-for-BCM4358-PCIe-device.patch b/package/kernel/mac80211/patches/339-0008-brcmfmac-add-support-for-BCM4358-PCIe-device.patch deleted file mode 100644 index a521b65d0f..0000000000 --- a/package/kernel/mac80211/patches/339-0008-brcmfmac-add-support-for-BCM4358-PCIe-device.patch +++ /dev/null @@ -1,77 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:31 +0200 -Subject: [PATCH] brcmfmac: add support for BCM4358 PCIe device - -This patch adds support for the BCM4358 2x2 11ac device. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -649,6 +649,7 @@ static u32 brcmf_chip_tcm_rambase(struct - case BRCM_CC_43567_CHIP_ID: - case BRCM_CC_43569_CHIP_ID: - case BRCM_CC_43570_CHIP_ID: -+ case BRCM_CC_4358_CHIP_ID: - case BRCM_CC_43602_CHIP_ID: - return 0x180000; - default: ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -51,6 +51,8 @@ enum brcmf_pcie_state { - #define BRCMF_PCIE_4356_NVRAM_NAME "brcm/brcmfmac4356-pcie.txt" - #define BRCMF_PCIE_43570_FW_NAME "brcm/brcmfmac43570-pcie.bin" - #define BRCMF_PCIE_43570_NVRAM_NAME "brcm/brcmfmac43570-pcie.txt" -+#define BRCMF_PCIE_4358_FW_NAME "brcm/brcmfmac4358-pcie.bin" -+#define BRCMF_PCIE_4358_NVRAM_NAME "brcm/brcmfmac4358-pcie.txt" - - #define BRCMF_PCIE_FW_UP_TIMEOUT 2000 /* msec */ - -@@ -189,6 +191,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME) - MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME); - - - struct brcmf_pcie_console { -@@ -1333,6 +1337,10 @@ static int brcmf_pcie_get_fwnames(struct - fw_name = BRCMF_PCIE_43570_FW_NAME; - nvram_name = BRCMF_PCIE_43570_NVRAM_NAME; - break; -+ case BRCM_CC_4358_CHIP_ID: -+ fw_name = BRCMF_PCIE_4358_FW_NAME; -+ nvram_name = BRCMF_PCIE_4358_NVRAM_NAME; -+ break; - default: - brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip); - return -ENODEV; -@@ -1850,6 +1858,7 @@ static struct pci_device_id brcmf_pcie_d - BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4358_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID), ---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -@@ -45,6 +45,7 @@ - #define BRCM_CC_43567_CHIP_ID 43567 - #define BRCM_CC_43569_CHIP_ID 43569 - #define BRCM_CC_43570_CHIP_ID 43570 -+#define BRCM_CC_4358_CHIP_ID 0x4358 - #define BRCM_CC_43602_CHIP_ID 43602 - - /* USB Device IDs */ -@@ -59,6 +60,7 @@ - #define BRCM_PCIE_4356_DEVICE_ID 0x43ec - #define BRCM_PCIE_43567_DEVICE_ID 0x43d3 - #define BRCM_PCIE_43570_DEVICE_ID 0x43d9 -+#define BRCM_PCIE_4358_DEVICE_ID 0x43e9 - #define BRCM_PCIE_43602_DEVICE_ID 0x43ba - #define BRCM_PCIE_43602_2G_DEVICE_ID 0x43bb - #define BRCM_PCIE_43602_5G_DEVICE_ID 0x43bc diff --git a/package/kernel/mac80211/patches/339-0009-brcmfmac-add-additional-43602-pcie-device-id.patch b/package/kernel/mac80211/patches/339-0009-brcmfmac-add-additional-43602-pcie-device-id.patch deleted file mode 100644 index bcbb984d42..0000000000 --- a/package/kernel/mac80211/patches/339-0009-brcmfmac-add-additional-43602-pcie-device-id.patch +++ /dev/null @@ -1,30 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:32 +0200 -Subject: [PATCH] brcmfmac: add additional 43602 pcie device id. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -1862,6 +1862,7 @@ static struct pci_device_id brcmf_pcie_d - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_RAW_DEVICE_ID), - { /* end: all zeroes */ } - }; - ---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -@@ -64,6 +64,7 @@ - #define BRCM_PCIE_43602_DEVICE_ID 0x43ba - #define BRCM_PCIE_43602_2G_DEVICE_ID 0x43bb - #define BRCM_PCIE_43602_5G_DEVICE_ID 0x43bc -+#define BRCM_PCIE_43602_RAW_DEVICE_ID 43602 - - /* brcmsmac IDs */ - #define BCM4313_D11N2G_ID 0x4727 /* 4313 802.11n 2.4G device */ diff --git a/package/kernel/mac80211/patches/339-0010-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch b/package/kernel/mac80211/patches/339-0010-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch deleted file mode 100644 index 5f9bbeaf5c..0000000000 --- a/package/kernel/mac80211/patches/339-0010-brcmfmac-Add-support-for-multiple-PCIE-devices-in-nv.patch +++ /dev/null @@ -1,351 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Tue, 14 Apr 2015 20:10:33 +0200 -Subject: [PATCH] brcmfmac: Add support for multiple PCIE devices in - nvram. - -With PCIE it is possible to support multiple devices with the -same device type. They all load the same nvram file. In order to -support this the nvram can specify which part of the nvram is -for which pcie device. This patch adds support for these new -types of nvram files. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -23,6 +23,10 @@ - #include "debug.h" - #include "firmware.h" - -+#define BRCMF_FW_MAX_NVRAM_SIZE 64000 -+#define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */ -+#define BRCMF_FW_NVRAM_PCIEDEV_LEN 9 /* pcie/1/4/ */ -+ - char brcmf_firmware_path[BRCMF_FW_PATH_LEN]; - module_param_string(firmware_path, brcmf_firmware_path, - BRCMF_FW_PATH_LEN, 0440); -@@ -46,6 +50,8 @@ enum nvram_parser_state { - * @column: current column in line. - * @pos: byte offset in input buffer. - * @entry: start position of key,value entry. -+ * @multi_dev_v1: detect pcie multi device v1 (compressed). -+ * @multi_dev_v2: detect pcie multi device v2. - */ - struct nvram_parser { - enum nvram_parser_state state; -@@ -56,6 +62,8 @@ struct nvram_parser { - u32 column; - u32 pos; - u32 entry; -+ bool multi_dev_v1; -+ bool multi_dev_v2; - }; - - static bool is_nvram_char(char c) -@@ -108,6 +116,10 @@ static enum nvram_parser_state brcmf_nvr - st = COMMENT; - else - st = VALUE; -+ if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0) -+ nvp->multi_dev_v1 = true; -+ if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0) -+ nvp->multi_dev_v2 = true; - } else if (!is_nvram_char(c)) { - brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n", - nvp->line, nvp->column); -@@ -133,6 +145,8 @@ brcmf_nvram_handle_value(struct nvram_pa - ekv = (u8 *)&nvp->fwnv->data[nvp->pos]; - skv = (u8 *)&nvp->fwnv->data[nvp->entry]; - cplen = ekv - skv; -+ if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE) -+ return END; - /* copy to output buffer */ - memcpy(&nvp->nvram[nvp->nvram_len], skv, cplen); - nvp->nvram_len += cplen; -@@ -180,10 +194,18 @@ static enum nvram_parser_state - static int brcmf_init_nvram_parser(struct nvram_parser *nvp, - const struct firmware *nv) - { -+ size_t size; -+ - memset(nvp, 0, sizeof(*nvp)); - nvp->fwnv = nv; -+ /* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */ -+ if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE) -+ size = BRCMF_FW_MAX_NVRAM_SIZE; -+ else -+ size = nv->size; - /* Alloc for extra 0 byte + roundup by 4 + length field */ -- nvp->nvram = kzalloc(nv->size + 1 + 3 + sizeof(u32), GFP_KERNEL); -+ size += 1 + 3 + sizeof(u32); -+ nvp->nvram = kzalloc(size, GFP_KERNEL); - if (!nvp->nvram) - return -ENOMEM; - -@@ -192,12 +214,136 @@ static int brcmf_init_nvram_parser(struc - return 0; - } - -+/* brcmf_fw_strip_multi_v1 :Some nvram files contain settings for multiple -+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine -+ * which data is to be returned. v1 is the version where nvram is stored -+ * compressed and "devpath" maps to index for valid entries. -+ */ -+static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr, -+ u16 bus_nr) -+{ -+ u32 i, j; -+ bool found; -+ u8 *nvram; -+ u8 id; -+ -+ nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL); -+ if (!nvram) -+ goto fail; -+ -+ /* min length: devpath0=pcie/1/4/ + 0:x=y */ -+ if (nvp->nvram_len < BRCMF_FW_NVRAM_DEVPATH_LEN + 6) -+ goto fail; -+ -+ /* First search for the devpathX and see if it is the configuration -+ * for domain_nr/bus_nr. Search complete nvp -+ */ -+ found = false; -+ i = 0; -+ while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) { -+ /* Format: devpathX=pcie/Y/Z/ -+ * Y = domain_nr, Z = bus_nr, X = virtual ID -+ */ -+ if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) && -+ (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) { -+ if (((nvp->nvram[i + 14] - '0') == domain_nr) && -+ ((nvp->nvram[i + 16] - '0') == bus_nr)) { -+ id = nvp->nvram[i + 7] - '0'; -+ found = true; -+ break; -+ } -+ } -+ while (nvp->nvram[i] != 0) -+ i++; -+ i++; -+ } -+ if (!found) -+ goto fail; -+ -+ /* Now copy all valid entries, release old nvram and assign new one */ -+ i = 0; -+ j = 0; -+ while (i < nvp->nvram_len) { -+ if ((nvp->nvram[i] - '0' == id) && (nvp->nvram[i + 1] == ':')) { -+ i += 2; -+ while (nvp->nvram[i] != 0) { -+ nvram[j] = nvp->nvram[i]; -+ i++; -+ j++; -+ } -+ nvram[j] = 0; -+ j++; -+ } -+ while (nvp->nvram[i] != 0) -+ i++; -+ i++; -+ } -+ kfree(nvp->nvram); -+ nvp->nvram = nvram; -+ nvp->nvram_len = j; -+ return; -+ -+fail: -+ kfree(nvram); -+ nvp->nvram_len = 0; -+} -+ -+/* brcmf_fw_strip_multi_v2 :Some nvram files contain settings for multiple -+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine -+ * which data is to be returned. v2 is the version where nvram is stored -+ * uncompressed, all relevant valid entries are identified by -+ * pcie/domain_nr/bus_nr: -+ */ -+static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr, -+ u16 bus_nr) -+{ -+ u32 i, j; -+ u8 *nvram; -+ -+ nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL); -+ if (!nvram) -+ goto fail; -+ -+ /* Copy all valid entries, release old nvram and assign new one. -+ * Valid entries are of type pcie/X/Y/ where X = domain_nr and -+ * Y = bus_nr. -+ */ -+ i = 0; -+ j = 0; -+ while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) { -+ if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) && -+ (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') && -+ ((nvp->nvram[i + 5] - '0') == domain_nr) && -+ ((nvp->nvram[i + 7] - '0') == bus_nr)) { -+ i += BRCMF_FW_NVRAM_PCIEDEV_LEN; -+ while (nvp->nvram[i] != 0) { -+ nvram[j] = nvp->nvram[i]; -+ i++; -+ j++; -+ } -+ nvram[j] = 0; -+ j++; -+ } -+ while (nvp->nvram[i] != 0) -+ i++; -+ i++; -+ } -+ kfree(nvp->nvram); -+ nvp->nvram = nvram; -+ nvp->nvram_len = j; -+ return; -+fail: -+ kfree(nvram); -+ nvp->nvram_len = 0; -+} -+ - /* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil - * and ending in a NUL. Removes carriage returns, empty lines, comment lines, - * and converts newlines to NULs. Shortens buffer as needed and pads with NULs. - * End of buffer is completed with token identifying length of buffer. - */ --static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length) -+static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length, -+ u16 domain_nr, u16 bus_nr) - { - struct nvram_parser nvp; - u32 pad; -@@ -212,6 +358,16 @@ static void *brcmf_fw_nvram_strip(const - if (nvp.state == END) - break; - } -+ if (nvp.multi_dev_v1) -+ brcmf_fw_strip_multi_v1(&nvp, domain_nr, bus_nr); -+ else if (nvp.multi_dev_v2) -+ brcmf_fw_strip_multi_v2(&nvp, domain_nr, bus_nr); -+ -+ if (nvp.nvram_len == 0) { -+ kfree(nvp.nvram); -+ return NULL; -+ } -+ - pad = nvp.nvram_len; - *new_length = roundup(nvp.nvram_len + 1, 4); - while (pad != *new_length) { -@@ -239,6 +395,8 @@ struct brcmf_fw { - u16 flags; - const struct firmware *code; - const char *nvram_name; -+ u16 domain_nr; -+ u16 bus_nr; - void (*done)(struct device *dev, const struct firmware *fw, - void *nvram_image, u32 nvram_len); - }; -@@ -254,7 +412,8 @@ static void brcmf_fw_request_nvram_done( - goto fail; - - if (fw) { -- nvram = brcmf_fw_nvram_strip(fw, &nvram_length); -+ nvram = brcmf_fw_nvram_strip(fw, &nvram_length, -+ fwctx->domain_nr, fwctx->bus_nr); - release_firmware(fw); - if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL)) - goto fail; -@@ -309,11 +468,12 @@ fail: - kfree(fwctx); - } - --int brcmf_fw_get_firmwares(struct device *dev, u16 flags, -- const char *code, const char *nvram, -- void (*fw_cb)(struct device *dev, -- const struct firmware *fw, -- void *nvram_image, u32 nvram_len)) -+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags, -+ const char *code, const char *nvram, -+ void (*fw_cb)(struct device *dev, -+ const struct firmware *fw, -+ void *nvram_image, u32 nvram_len), -+ u16 domain_nr, u16 bus_nr) - { - struct brcmf_fw *fwctx; - -@@ -333,8 +493,21 @@ int brcmf_fw_get_firmwares(struct device - fwctx->done = fw_cb; - if (flags & BRCMF_FW_REQUEST_NVRAM) - fwctx->nvram_name = nvram; -+ fwctx->domain_nr = domain_nr; -+ fwctx->bus_nr = bus_nr; - - return request_firmware_nowait(THIS_MODULE, true, code, dev, - GFP_KERNEL, fwctx, - brcmf_fw_request_code_done); - } -+ -+int brcmf_fw_get_firmwares(struct device *dev, u16 flags, -+ const char *code, const char *nvram, -+ void (*fw_cb)(struct device *dev, -+ const struct firmware *fw, -+ void *nvram_image, u32 nvram_len)) -+{ -+ return brcmf_fw_get_firmwares_pcie(dev, flags, code, nvram, fw_cb, 0, -+ 0); -+} -+ ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h -@@ -32,6 +32,12 @@ void brcmf_fw_nvram_free(void *nvram); - * fails it will not use the callback, but call device_release_driver() - * instead which will call the driver .remove() callback. - */ -+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags, -+ const char *code, const char *nvram, -+ void (*fw_cb)(struct device *dev, -+ const struct firmware *fw, -+ void *nvram_image, u32 nvram_len), -+ u16 domain_nr, u16 bus_nr); - int brcmf_fw_get_firmwares(struct device *dev, u16 flags, - const char *code, const char *nvram, - void (*fw_cb)(struct device *dev, ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -1649,8 +1649,13 @@ brcmf_pcie_probe(struct pci_dev *pdev, c - struct brcmf_pciedev_info *devinfo; - struct brcmf_pciedev *pcie_bus_dev; - struct brcmf_bus *bus; -+ u16 domain_nr; -+ u16 bus_nr; - -- brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device); -+ domain_nr = pci_domain_nr(pdev->bus) + 1; -+ bus_nr = pdev->bus->number; -+ brcmf_dbg(PCIE, "Enter %x:%x (%d/%d)\n", pdev->vendor, pdev->device, -+ domain_nr, bus_nr); - - ret = -ENOMEM; - devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL); -@@ -1699,10 +1704,10 @@ brcmf_pcie_probe(struct pci_dev *pdev, c - if (ret) - goto fail_bus; - -- ret = brcmf_fw_get_firmwares(bus->dev, BRCMF_FW_REQUEST_NVRAM | -- BRCMF_FW_REQ_NV_OPTIONAL, -- devinfo->fw_name, devinfo->nvram_name, -- brcmf_pcie_setup); -+ ret = brcmf_fw_get_firmwares_pcie(bus->dev, BRCMF_FW_REQUEST_NVRAM | -+ BRCMF_FW_REQ_NV_OPTIONAL, -+ devinfo->fw_name, devinfo->nvram_name, -+ brcmf_pcie_setup, domain_nr, bus_nr); - if (ret == 0) - return 0; - fail_bus: diff --git a/package/kernel/mac80211/patches/340-brcmfmac-cleanup-a-sizeof.patch b/package/kernel/mac80211/patches/340-brcmfmac-cleanup-a-sizeof.patch deleted file mode 100644 index d26e118d77..0000000000 --- a/package/kernel/mac80211/patches/340-brcmfmac-cleanup-a-sizeof.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: Dan Carpenter <dan.carpenter@oracle.com> -Date: Thu, 7 May 2015 12:59:19 +0300 -Subject: [PATCH] brcmfmac: cleanup a sizeof() - -"flowrings" and "*flowrings" are both pointers so this always returns -sizeof(void *) and the current code works fine. But "*flowrings" is -intended here and static checkers complain, so lets change it. - -Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -1617,7 +1617,7 @@ static void brcmf_pcie_setup(struct devi - bus->msgbuf->commonrings[i] = - &devinfo->shared.commonrings[i]->commonring; - -- flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(flowrings), -+ flowrings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*flowrings), - GFP_KERNEL); - if (!flowrings) - goto fail; diff --git a/package/kernel/mac80211/patches/341-brcmfmac-check-result-of-USB-firmware-request.patch b/package/kernel/mac80211/patches/341-brcmfmac-check-result-of-USB-firmware-request.patch deleted file mode 100644 index 9b2880d8fc..0000000000 --- a/package/kernel/mac80211/patches/341-brcmfmac-check-result-of-USB-firmware-request.patch +++ /dev/null @@ -1,33 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 7 May 2015 14:13:03 +0200 -Subject: [PATCH] brcmfmac: check result of USB firmware request -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This prevents silence failures with driver waiting (infinitely) for a -callback. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Acked-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c -@@ -1270,8 +1270,13 @@ static int brcmf_usb_probe_cb(struct brc - bus->chiprev = bus_pub->chiprev; - - /* request firmware here */ -- brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL, -- brcmf_usb_probe_phase2); -+ ret = brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), -+ NULL, brcmf_usb_probe_phase2); -+ if (ret) { -+ brcmf_err("firmware request failed: %d\n", ret); -+ goto fail; -+ } -+ - return 0; - - fail: diff --git a/package/kernel/mac80211/patches/342-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch b/package/kernel/mac80211/patches/342-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch deleted file mode 100644 index d46b300daa..0000000000 --- a/package/kernel/mac80211/patches/342-brcmfmac-prohibit-ACPI-power-management-for-brcmfmac.patch +++ /dev/null @@ -1,47 +0,0 @@ -From: "Fu, Zhonghui" <zhonghui.fu@linux.intel.com> -Date: Mon, 11 May 2015 10:41:32 +0800 -Subject: [PATCH] brcmfmac: prohibit ACPI power management for brcmfmac driver - -ACPI will manage WiFi chip's power state during suspend/resume -process on some tablet platforms(such as ASUS T100TA). This is -not supported by brcmfmac driver now, and the context of WiFi -chip will be damaged after resume. This patch informs ACPI not -to manage WiFi chip's power state. - -Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com> -Acked-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -@@ -33,6 +33,7 @@ - #include <linux/suspend.h> - #include <linux/errno.h> - #include <linux/module.h> -+#include <linux/acpi.h> - #include <net/cfg80211.h> - - #include <defs.h> -@@ -1122,6 +1123,8 @@ static int brcmf_ops_sdio_probe(struct s - int err; - struct brcmf_sdio_dev *sdiodev; - struct brcmf_bus *bus_if; -+ struct device *dev; -+ struct acpi_device *adev; - - brcmf_dbg(SDIO, "Enter\n"); - brcmf_dbg(SDIO, "Class=%x\n", func->class); -@@ -1129,6 +1132,12 @@ static int brcmf_ops_sdio_probe(struct s - brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); - brcmf_dbg(SDIO, "Function#: %d\n", func->num); - -+ /* prohibit ACPI power management for this device */ -+ dev = &func->dev; -+ adev = ACPI_COMPANION(dev); -+ if (adev) -+ adev->flags.power_manageable = 0; -+ - /* Consume func num 1 but dont do anything with it. */ - if (func->num == 1) - return 0; diff --git a/package/kernel/mac80211/patches/343-brcmfmac-avoid-gcc-5.1-warning.patch b/package/kernel/mac80211/patches/343-brcmfmac-avoid-gcc-5.1-warning.patch deleted file mode 100644 index 9b4609fb75..0000000000 --- a/package/kernel/mac80211/patches/343-brcmfmac-avoid-gcc-5.1-warning.patch +++ /dev/null @@ -1,30 +0,0 @@ -From: Arnd Bergmann <arnd@arndb.de> -Date: Tue, 12 May 2015 23:54:25 +0200 -Subject: [PATCH] brcmfmac: avoid gcc-5.1 warning - -gcc-5.0 gained a new warning in the fwsignal portion of the brcmfmac -driver: - -drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function 'brcmf_fws_txs_process': -drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] - -This is a false positive, and marking the brcmf_fws_hanger_poppkt function -as 'static inline' makes the warning go away. I have checked the object -file output and while a little code gets moved around, the size of -the binary remains identical. - -Signed-off-by: Arnd Bergmann <arnd@arndb.de> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -@@ -635,7 +635,7 @@ static int brcmf_fws_hanger_pushpkt(stru - return 0; - } - --static int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h, -+static inline int brcmf_fws_hanger_poppkt(struct brcmf_fws_hanger *h, - u32 slot_id, struct sk_buff **pktout, - bool remove_item) - { diff --git a/package/kernel/mac80211/patches/344-0001-brcmfmac-allow-device-tree-node-without-interrupts-p.patch b/package/kernel/mac80211/patches/344-0001-brcmfmac-allow-device-tree-node-without-interrupts-p.patch deleted file mode 100644 index b16782d593..0000000000 --- a/package/kernel/mac80211/patches/344-0001-brcmfmac-allow-device-tree-node-without-interrupts-p.patch +++ /dev/null @@ -1,45 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 20 May 2015 14:09:47 +0200 -Subject: [PATCH] brcmfmac: allow device tree node without 'interrupts' - property - -As described in the device tree bindings for 'brcm,bcm4329-fmac' -nodes, the interrupts property is optional. So adding a check -for the presence of this property before attempting to parse -and map the interrupt. If not present or parsing fails return -and fallback to in-band sdio interrupt. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/of.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/of.c -@@ -39,10 +39,16 @@ void brcmf_of_probe(struct brcmf_sdio_de - if (!sdiodev->pdata) - return; - -+ if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) -+ sdiodev->pdata->drive_strength = val; -+ -+ /* make sure there are interrupts defined in the node */ -+ if (!of_find_property(np, "interrupts", NULL)) -+ return; -+ - irq = irq_of_parse_and_map(np, 0); - if (!irq) { - brcmf_err("interrupt could not be mapped\n"); -- devm_kfree(dev, sdiodev->pdata); - return; - } - irqf = irqd_get_trigger_type(irq_get_irq_data(irq)); -@@ -50,7 +56,4 @@ void brcmf_of_probe(struct brcmf_sdio_de - sdiodev->pdata->oob_irq_supported = true; - sdiodev->pdata->oob_irq_nr = irq; - sdiodev->pdata->oob_irq_flags = irqf; -- -- if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0) -- sdiodev->pdata->drive_strength = val; - } diff --git a/package/kernel/mac80211/patches/344-0002-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch b/package/kernel/mac80211/patches/344-0002-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch deleted file mode 100644 index f81250ee4c..0000000000 --- a/package/kernel/mac80211/patches/344-0002-brcmfmac-Improve-throughput-by-scheduling-msbug-flow.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 20 May 2015 14:09:48 +0200 -Subject: [PATCH] brcmfmac: Improve throughput by scheduling msbug flow worker. - -The tx flow worker in msgbuf gets scheduled at tx till a certain -threshold has been reached. Then the tx completes will take over -the scheduling. When amsdu and ampdu is used the frames are -transferred wireless in a very bulky fashion, in combination -with this scheduling algorithm and buffer limiters in the stack -this can result in limited throughput. This change causes the -flow worker to be scheduled more frequently from tx. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c -@@ -249,8 +249,8 @@ void brcmf_flowring_delete(struct brcmf_ - } - - --void brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid, -- struct sk_buff *skb) -+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid, -+ struct sk_buff *skb) - { - struct brcmf_flowring_ring *ring; - -@@ -271,6 +271,7 @@ void brcmf_flowring_enqueue(struct brcmf - if (skb_queue_len(&ring->skblist) < BRCMF_FLOWRING_LOW) - brcmf_flowring_block(flow, flowid, false); - } -+ return skb_queue_len(&ring->skblist); - } - - ---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.h -@@ -64,8 +64,8 @@ u32 brcmf_flowring_create(struct brcmf_f - void brcmf_flowring_delete(struct brcmf_flowring *flow, u8 flowid); - void brcmf_flowring_open(struct brcmf_flowring *flow, u8 flowid); - u8 brcmf_flowring_tid(struct brcmf_flowring *flow, u8 flowid); --void brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid, -- struct sk_buff *skb); -+u32 brcmf_flowring_enqueue(struct brcmf_flowring *flow, u8 flowid, -+ struct sk_buff *skb); - struct sk_buff *brcmf_flowring_dequeue(struct brcmf_flowring *flow, u8 flowid); - void brcmf_flowring_reinsert(struct brcmf_flowring *flow, u8 flowid, - struct sk_buff *skb); ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -73,7 +73,7 @@ - #define BRCMF_MSGBUF_TX_FLUSH_CNT1 32 - #define BRCMF_MSGBUF_TX_FLUSH_CNT2 96 - --#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS 64 -+#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS 96 - #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS 32 - - struct msgbuf_common_hdr { -@@ -797,6 +797,8 @@ static int brcmf_msgbuf_txdata(struct br - struct brcmf_flowring *flow = msgbuf->flow; - struct ethhdr *eh = (struct ethhdr *)(skb->data); - u32 flowid; -+ u32 queue_count; -+ bool force; - - flowid = brcmf_flowring_lookup(flow, eh->h_dest, skb->priority, ifidx); - if (flowid == BRCMF_FLOWRING_INVALID_ID) { -@@ -804,8 +806,9 @@ static int brcmf_msgbuf_txdata(struct br - if (flowid == BRCMF_FLOWRING_INVALID_ID) - return -ENOMEM; - } -- brcmf_flowring_enqueue(flow, flowid, skb); -- brcmf_msgbuf_schedule_txdata(msgbuf, flowid, false); -+ queue_count = brcmf_flowring_enqueue(flow, flowid, skb); -+ force = ((queue_count % BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS) == 0); -+ brcmf_msgbuf_schedule_txdata(msgbuf, flowid, force); - - return 0; - } diff --git a/package/kernel/mac80211/patches/344-0003-brcmfmac-remove-pci-shared-structure-rev4-support.patch b/package/kernel/mac80211/patches/344-0003-brcmfmac-remove-pci-shared-structure-rev4-support.patch deleted file mode 100644 index 61153c4a98..0000000000 --- a/package/kernel/mac80211/patches/344-0003-brcmfmac-remove-pci-shared-structure-rev4-support.patch +++ /dev/null @@ -1,41 +0,0 @@ -From: Franky Lin <frankyl@broadcom.com> -Date: Wed, 20 May 2015 14:09:49 +0200 -Subject: [PATCH] brcmfmac: remove pci shared structure rev4 support - -All pcie full dongle chips supported by fmac are using rev 5+ shared -structure. This patch removes the rev4 related code. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Signed-off-by: Franky Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -112,10 +112,9 @@ enum brcmf_pcie_state { - BRCMF_PCIE_MB_INT_D2H3_DB0 | \ - BRCMF_PCIE_MB_INT_D2H3_DB1) - --#define BRCMF_PCIE_MIN_SHARED_VERSION 4 -+#define BRCMF_PCIE_MIN_SHARED_VERSION 5 - #define BRCMF_PCIE_MAX_SHARED_VERSION 5 - #define BRCMF_PCIE_SHARED_VERSION_MASK 0x00FF --#define BRCMF_PCIE_SHARED_TXPUSH_SUPPORT 0x4000 - - #define BRCMF_PCIE_FLAGS_HTOD_SPLIT 0x4000 - #define BRCMF_PCIE_FLAGS_DTOH_SPLIT 0x8000 -@@ -1280,11 +1279,6 @@ brcmf_pcie_init_share_ram_info(struct br - brcmf_err("Unsupported PCIE version %d\n", version); - return -EINVAL; - } -- if (shared->flags & BRCMF_PCIE_SHARED_TXPUSH_SUPPORT) { -- brcmf_err("Unsupported legacy TX mode 0x%x\n", -- shared->flags & BRCMF_PCIE_SHARED_TXPUSH_SUPPORT); -- return -EINVAL; -- } - - addr = sharedram_addr + BRCMF_SHARED_MAX_RXBUFPOST_OFFSET; - shared->max_rxbufpost = brcmf_pcie_read_tcm16(devinfo, addr); diff --git a/package/kernel/mac80211/patches/344-0004-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch b/package/kernel/mac80211/patches/344-0004-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch deleted file mode 100644 index 8c8eebe44f..0000000000 --- a/package/kernel/mac80211/patches/344-0004-brcmfmac-remove-dummy-cache-flush-invalidate-functio.patch +++ /dev/null @@ -1,120 +0,0 @@ -From: Franky Lin <frankyl@broadcom.com> -Date: Wed, 20 May 2015 14:09:50 +0200 -Subject: [PATCH] brcmfmac: remove dummy cache flush/invalidate function - -brcmf_dma_flush and brcmf_dma_invalidate_cache are not necessary and -have never been implemented. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Signed-off-by: Franky Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.c -@@ -22,17 +22,6 @@ - #include "core.h" - #include "commonring.h" - -- --/* dma flushing needs implementation for mips and arm platforms. Should -- * be put in util. Note, this is not real flushing. It is virtual non -- * cached memory. Only write buffers should have to be drained. Though -- * this may be different depending on platform...... -- * SEE ALSO msgbuf.c -- */ --#define brcmf_dma_flush(addr, len) --#define brcmf_dma_invalidate_cache(addr, len) -- -- - void brcmf_commonring_register_cb(struct brcmf_commonring *commonring, - int (*cr_ring_bell)(void *ctx), - int (*cr_update_rptr)(void *ctx), -@@ -206,14 +195,9 @@ int brcmf_commonring_write_complete(stru - address = commonring->buf_addr; - address += (commonring->f_ptr * commonring->item_len); - if (commonring->f_ptr > commonring->w_ptr) { -- brcmf_dma_flush(address, -- (commonring->depth - commonring->f_ptr) * -- commonring->item_len); - address = commonring->buf_addr; - commonring->f_ptr = 0; - } -- brcmf_dma_flush(address, (commonring->w_ptr - commonring->f_ptr) * -- commonring->item_len); - - commonring->f_ptr = commonring->w_ptr; - -@@ -258,8 +242,6 @@ void *brcmf_commonring_get_read_ptr(stru - if (commonring->r_ptr == commonring->depth) - commonring->r_ptr = 0; - -- brcmf_dma_invalidate_cache(ret_addr, *n_ items * commonring->item_len); -- - return ret_addr; - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -278,16 +278,6 @@ struct brcmf_msgbuf_pktids { - struct brcmf_msgbuf_pktid *array; - }; - -- --/* dma flushing needs implementation for mips and arm platforms. Should -- * be put in util. Note, this is not real flushing. It is virtual non -- * cached memory. Only write buffers should have to be drained. Though -- * this may be different depending on platform...... -- */ --#define brcmf_dma_flush(addr, len) --#define brcmf_dma_invalidate_cache(addr, len) -- -- - static void brcmf_msgbuf_rxbuf_ioctlresp_post(struct brcmf_msgbuf *msgbuf); - - -@@ -462,7 +452,6 @@ static int brcmf_msgbuf_tx_ioctl(struct - memcpy(msgbuf->ioctbuf, buf, buf_len); - else - memset(msgbuf->ioctbuf, 0, buf_len); -- brcmf_dma_flush(ioctl_buf, buf_len); - - err = brcmf_commonring_write_complete(commonring); - brcmf_commonring_unlock(commonring); ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -276,15 +276,6 @@ static const u32 brcmf_ring_itemsize[BRC - }; - - --/* dma flushing needs implementation for mips and arm platforms. Should -- * be put in util. Note, this is not real flushing. It is virtual non -- * cached memory. Only write buffers should have to be drained. Though -- * this may be different depending on platform...... -- */ --#define brcmf_dma_flush(addr, len) --#define brcmf_dma_invalidate_cache(addr, len) -- -- - static u32 - brcmf_pcie_read_reg32(struct brcmf_pciedev_info *devinfo, u32 reg_offset) - { -@@ -1174,7 +1165,6 @@ static int brcmf_pcie_init_scratchbuffer - goto fail; - - memset(devinfo->shared.scratch, 0, BRCMF_DMA_D2H_SCRATCH_BUF_LEN); -- brcmf_dma_flush(devinfo->shared.scratch, BRCMF_DMA_D2H_SCRATCH_BUF_LEN); - - addr = devinfo->shared.tcm_base_address + - BRCMF_SHARED_DMA_SCRATCH_ADDR_OFFSET; -@@ -1192,7 +1182,6 @@ static int brcmf_pcie_init_scratchbuffer - goto fail; - - memset(devinfo->shared.ringupd, 0, BRCMF_DMA_D2H_RINGUPD_BUF_LEN); -- brcmf_dma_flush(devinfo->shared.ringupd, BRCMF_DMA_D2H_RINGUPD_BUF_LEN); - - addr = devinfo->shared.tcm_base_address + - BRCMF_SHARED_DMA_RINGUPD_ADDR_OFFSET; diff --git a/package/kernel/mac80211/patches/344-0005-brcmfmac-add-support-for-dma-indices-feature.patch b/package/kernel/mac80211/patches/344-0005-brcmfmac-add-support-for-dma-indices-feature.patch deleted file mode 100644 index 2f50abd0e1..0000000000 --- a/package/kernel/mac80211/patches/344-0005-brcmfmac-add-support-for-dma-indices-feature.patch +++ /dev/null @@ -1,270 +0,0 @@ -From: Franky Lin <frankyl@broadcom.com> -Date: Wed, 20 May 2015 14:09:51 +0200 -Subject: [PATCH] brcmfmac: add support for dma indices feature - -PCIe full dongle firmware can support a dma indices feature with which -firmware can update/fetch the read/write indices of message buffer -rings on both host to dongle and dongle to host directions. The support is -announced by firmware through shared flags. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Franky Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -115,6 +115,8 @@ enum brcmf_pcie_state { - #define BRCMF_PCIE_MIN_SHARED_VERSION 5 - #define BRCMF_PCIE_MAX_SHARED_VERSION 5 - #define BRCMF_PCIE_SHARED_VERSION_MASK 0x00FF -+#define BRCMF_PCIE_SHARED_DMA_INDEX 0x10000 -+#define BRCMF_PCIE_SHARED_DMA_2B_IDX 0x100000 - - #define BRCMF_PCIE_FLAGS_HTOD_SPLIT 0x4000 - #define BRCMF_PCIE_FLAGS_DTOH_SPLIT 0x8000 -@@ -146,6 +148,10 @@ enum brcmf_pcie_state { - #define BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET 8 - #define BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET 12 - #define BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET 16 -+#define BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET 20 -+#define BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET 28 -+#define BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET 36 -+#define BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET 44 - #define BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET 0 - #define BRCMF_SHARED_RING_MAX_SUB_QUEUES 52 - -@@ -247,6 +253,13 @@ struct brcmf_pciedev_info { - bool mbdata_completed; - bool irq_allocated; - bool wowl_enabled; -+ u8 dma_idx_sz; -+ void *idxbuf; -+ u32 idxbuf_sz; -+ dma_addr_t idxbuf_dmahandle; -+ u16 (*read_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset); -+ void (*write_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset, -+ u16 value); - }; - - struct brcmf_pcie_ringbuf { -@@ -323,6 +336,25 @@ brcmf_pcie_write_tcm16(struct brcmf_pcie - } - - -+static u16 -+brcmf_pcie_read_idx(struct brcmf_pciedev_info *devinfo, u32 mem_offset) -+{ -+ u16 *address = devinfo->idxbuf + mem_offset; -+ -+ return (*(address)); -+} -+ -+ -+static void -+brcmf_pcie_write_idx(struct brcmf_pciedev_info *devinfo, u32 mem_offset, -+ u16 value) -+{ -+ u16 *address = devinfo->idxbuf + mem_offset; -+ -+ *(address) = value; -+} -+ -+ - static u32 - brcmf_pcie_read_tcm32(struct brcmf_pciedev_info *devinfo, u32 mem_offset) - { -@@ -868,7 +900,7 @@ static int brcmf_pcie_ring_mb_write_rptr - brcmf_dbg(PCIE, "W r_ptr %d (%d), ring %d\n", commonring->r_ptr, - commonring->w_ptr, ring->id); - -- brcmf_pcie_write_tcm16(devinfo, ring->r_idx_addr, commonring->r_ptr); -+ devinfo->write_ptr(devinfo, ring->r_idx_addr, commonring->r_ptr); - - return 0; - } -@@ -886,7 +918,7 @@ static int brcmf_pcie_ring_mb_write_wptr - brcmf_dbg(PCIE, "W w_ptr %d (%d), ring %d\n", commonring->w_ptr, - commonring->r_ptr, ring->id); - -- brcmf_pcie_write_tcm16(devinfo, ring->w_idx_addr, commonring->w_ptr); -+ devinfo->write_ptr(devinfo, ring->w_idx_addr, commonring->w_ptr); - - return 0; - } -@@ -915,7 +947,7 @@ static int brcmf_pcie_ring_mb_update_rpt - if (devinfo->state != BRCMFMAC_PCIE_STATE_UP) - return -EIO; - -- commonring->r_ptr = brcmf_pcie_read_tcm16(devinfo, ring->r_idx_addr); -+ commonring->r_ptr = devinfo->read_ptr(devinfo, ring->r_idx_addr); - - brcmf_dbg(PCIE, "R r_ptr %d (%d), ring %d\n", commonring->r_ptr, - commonring->w_ptr, ring->id); -@@ -933,7 +965,7 @@ static int brcmf_pcie_ring_mb_update_wpt - if (devinfo->state != BRCMFMAC_PCIE_STATE_UP) - return -EIO; - -- commonring->w_ptr = brcmf_pcie_read_tcm16(devinfo, ring->w_idx_addr); -+ commonring->w_ptr = devinfo->read_ptr(devinfo, ring->w_idx_addr); - - brcmf_dbg(PCIE, "R w_ptr %d (%d), ring %d\n", commonring->w_ptr, - commonring->r_ptr, ring->id); -@@ -1038,6 +1070,13 @@ static void brcmf_pcie_release_ringbuffe - } - kfree(devinfo->shared.flowrings); - devinfo->shared.flowrings = NULL; -+ if (devinfo->idxbuf) { -+ dma_free_coherent(&devinfo->pdev->dev, -+ devinfo->idxbuf_sz, -+ devinfo->idxbuf, -+ devinfo->idxbuf_dmahandle); -+ devinfo->idxbuf = NULL; -+ } - } - - -@@ -1053,19 +1092,72 @@ static int brcmf_pcie_init_ringbuffers(s - u32 addr; - u32 ring_mem_ptr; - u32 i; -+ u64 address; -+ u32 bufsz; - u16 max_sub_queues; -+ u8 idx_offset; - - ring_addr = devinfo->shared.ring_info_addr; - brcmf_dbg(PCIE, "Base ring addr = 0x%08x\n", ring_addr); -+ addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES; -+ max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr); - -- addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET; -- d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -- addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET; -- d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -- addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET; -- h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -- addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET; -- h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -+ if (devinfo->dma_idx_sz != 0) { -+ bufsz = (BRCMF_NROF_D2H_COMMON_MSGRINGS + max_sub_queues) * -+ devinfo->dma_idx_sz * 2; -+ devinfo->idxbuf = dma_alloc_coherent(&devinfo->pdev->dev, bufsz, -+ &devinfo->idxbuf_dmahandle, -+ GFP_KERNEL); -+ if (!devinfo->idxbuf) -+ devinfo->dma_idx_sz = 0; -+ } -+ -+ if (devinfo->dma_idx_sz == 0) { -+ addr = ring_addr + BRCMF_SHARED_RING_D2H_W_IDX_PTR_OFFSET; -+ d2h_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -+ addr = ring_addr + BRCMF_SHARED_RING_D2H_R_IDX_PTR_OFFSET; -+ d2h_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -+ addr = ring_addr + BRCMF_SHARED_RING_H2D_W_IDX_PTR_OFFSET; -+ h2d_w_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -+ addr = ring_addr + BRCMF_SHARED_RING_H2D_R_IDX_PTR_OFFSET; -+ h2d_r_idx_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -+ idx_offset = sizeof(u32); -+ devinfo->write_ptr = brcmf_pcie_write_tcm16; -+ devinfo->read_ptr = brcmf_pcie_read_tcm16; -+ brcmf_dbg(PCIE, "Using TCM indices\n"); -+ } else { -+ memset(devinfo->idxbuf, 0, bufsz); -+ devinfo->idxbuf_sz = bufsz; -+ idx_offset = devinfo->dma_idx_sz; -+ devinfo->write_ptr = brcmf_pcie_write_idx; -+ devinfo->read_ptr = brcmf_pcie_read_idx; -+ -+ h2d_w_idx_ptr = 0; -+ addr = ring_addr + BRCMF_SHARED_RING_H2D_WP_HADDR_OFFSET; -+ address = (u64)devinfo->idxbuf_dmahandle; -+ brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff); -+ brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32); -+ -+ h2d_r_idx_ptr = h2d_w_idx_ptr + max_sub_queues * idx_offset; -+ addr = ring_addr + BRCMF_SHARED_RING_H2D_RP_HADDR_OFFSET; -+ address += max_sub_queues * idx_offset; -+ brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff); -+ brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32); -+ -+ d2h_w_idx_ptr = h2d_r_idx_ptr + max_sub_queues * idx_offset; -+ addr = ring_addr + BRCMF_SHARED_RING_D2H_WP_HADDR_OFFSET; -+ address += max_sub_queues * idx_offset; -+ brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff); -+ brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32); -+ -+ d2h_r_idx_ptr = d2h_w_idx_ptr + -+ BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset; -+ addr = ring_addr + BRCMF_SHARED_RING_D2H_RP_HADDR_OFFSET; -+ address += BRCMF_NROF_D2H_COMMON_MSGRINGS * idx_offset; -+ brcmf_pcie_write_tcm32(devinfo, addr, address & 0xffffffff); -+ brcmf_pcie_write_tcm32(devinfo, addr + 4, address >> 32); -+ brcmf_dbg(PCIE, "Using host memory indices\n"); -+ } - - addr = ring_addr + BRCMF_SHARED_RING_TCM_MEMLOC_OFFSET; - ring_mem_ptr = brcmf_pcie_read_tcm32(devinfo, addr); -@@ -1079,8 +1171,8 @@ static int brcmf_pcie_init_ringbuffers(s - ring->id = i; - devinfo->shared.commonrings[i] = ring; - -- h2d_w_idx_ptr += sizeof(u32); -- h2d_r_idx_ptr += sizeof(u32); -+ h2d_w_idx_ptr += idx_offset; -+ h2d_r_idx_ptr += idx_offset; - ring_mem_ptr += BRCMF_RING_MEM_SZ; - } - -@@ -1094,13 +1186,11 @@ static int brcmf_pcie_init_ringbuffers(s - ring->id = i; - devinfo->shared.commonrings[i] = ring; - -- d2h_w_idx_ptr += sizeof(u32); -- d2h_r_idx_ptr += sizeof(u32); -+ d2h_w_idx_ptr += idx_offset; -+ d2h_r_idx_ptr += idx_offset; - ring_mem_ptr += BRCMF_RING_MEM_SZ; - } - -- addr = ring_addr + BRCMF_SHARED_RING_MAX_SUB_QUEUES; -- max_sub_queues = brcmf_pcie_read_tcm16(devinfo, addr); - devinfo->shared.nrof_flowrings = - max_sub_queues - BRCMF_NROF_H2D_COMMON_MSGRINGS; - rings = kcalloc(devinfo->shared.nrof_flowrings, sizeof(*ring), -@@ -1124,15 +1214,15 @@ static int brcmf_pcie_init_ringbuffers(s - ring); - ring->w_idx_addr = h2d_w_idx_ptr; - ring->r_idx_addr = h2d_r_idx_ptr; -- h2d_w_idx_ptr += sizeof(u32); -- h2d_r_idx_ptr += sizeof(u32); -+ h2d_w_idx_ptr += idx_offset; -+ h2d_r_idx_ptr += idx_offset; - } - devinfo->shared.flowrings = rings; - - return 0; - - fail: -- brcmf_err("Allocating commonring buffers failed\n"); -+ brcmf_err("Allocating ring buffers failed\n"); - brcmf_pcie_release_ringbuffers(devinfo); - return -ENOMEM; - } -@@ -1269,6 +1359,14 @@ brcmf_pcie_init_share_ram_info(struct br - return -EINVAL; - } - -+ /* check firmware support dma indicies */ -+ if (shared->flags & BRCMF_PCIE_SHARED_DMA_INDEX) { -+ if (shared->flags & BRCMF_PCIE_SHARED_DMA_2B_IDX) -+ devinfo->dma_idx_sz = sizeof(u16); -+ else -+ devinfo->dma_idx_sz = sizeof(u32); -+ } -+ - addr = sharedram_addr + BRCMF_SHARED_MAX_RXBUFPOST_OFFSET; - shared->max_rxbufpost = brcmf_pcie_read_tcm16(devinfo, addr); - if (shared->max_rxbufpost == 0) diff --git a/package/kernel/mac80211/patches/345-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch b/package/kernel/mac80211/patches/345-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch deleted file mode 100644 index 28408d2b4f..0000000000 --- a/package/kernel/mac80211/patches/345-brcmfmac-avoid-null-pointer-access-when-brcmf_msgbuf.patch +++ /dev/null @@ -1,102 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Tue, 26 May 2015 13:19:46 +0200 -Subject: [PATCH] brcmfmac: avoid null pointer access when - brcmf_msgbuf_get_pktid() fails - -The function brcmf_msgbuf_get_pktid() may return a NULL pointer so -the callers should check the return pointer before accessing it to -avoid the crash below (see [1]): - -brcmfmac: brcmf_msgbuf_get_pktid: Invalid packet id 273 (not in use) -BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 -IP: [<ffffffff8145b225>] skb_pull+0x5/0x50 -PGD 0 -Oops: 0000 [#1] PREEMPT SMP -Modules linked in: pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) - snd_hda_codec_hdmi bnep mousedev hid_generic ushwmon msr ext4 crc16 mbcache - jbd2 sd_mod uas usb_storage ahci libahci libata scsi_mod xhci_pci xhci_hcd - usbcore usb_common -CPU: 0 PID: 1661 Comm: irq/61-brcmf_pc Tainted: G O 4.0.1-MacbookPro-ARCH #1 -Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, - BIOS MBP121.88Z.0167.B02.1503241251 03/24/2015 -task: ffff880264203cc0 ti: ffff88025ffe4000 task.ti: ffff88025ffe4000 -RIP: 0010:[<ffffffff8145b225>] [<ffffffff8145b225>] skb_pull+0x5/0x50 -RSP: 0018:ffff88025ffe7d40 EFLAGS: 00010202 -RAX: 0000000000000000 RBX: ffff88008a33c000 RCX: 0000000000000044 -RDX: 0000000000000000 RSI: 000000000000004a RDI: 0000000000000000 -RBP: ffff88025ffe7da8 R08: 0000000000000096 R09: 000000000000004a -R10: 0000000000000000 R11: 000000000000048e R12: ffff88025ff14f00 -R13: 0000000000000000 R14: ffff880263b48200 R15: ffff88008a33c000 -FS: 0000000000000000(0000) GS:ffff88026ec00000(0000) knlGS:0000000000000000 -CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 -CR2: 0000000000000080 CR3: 000000000180b000 CR4: 00000000003407f0 -Stack: - ffffffffa06aed74 ffff88025ffe7dc8 ffff880263b48270 ffff880263b48278 - 05ea88020000004a 0002ffff81014635 000000001720b2f6 ffff88026ec116c0 - ffff880263b48200 0000000000010000 ffff880263b4ae00 ffff880264203cc0 -Call Trace: - [<ffffffffa06aed74>] ? brcmf_msgbuf_process_rx+0x404/0x480 [brcmfmac] - [<ffffffff810cea60>] ? irq_finalize_oneshot.part.30+0xf0/0xf0 - [<ffffffffa06afb55>] brcmf_proto_msgbuf_rx_trigger+0x35/0xf0 [brcmfmac] - [<ffffffffa06baf2a>] brcmf_pcie_isr_thread_v2+0x8a/0x130 [brcmfmac] - [<ffffffff810cea80>] irq_thread_fn+0x20/0x50 - [<ffffffff810ceddf>] irq_thread+0x13f/0x170 - [<ffffffff810cebf0>] ? wake_threads_waitq+0x30/0x30 - [<ffffffff810ceca0>] ? irq_thread_dtor+0xb0/0xb0 - [<ffffffff81092a08>] kthread+0xd8/0xf0 - [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0 - [<ffffffff8156d898>] ret_from_fork+0x58/0x90 - [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0 -Code: 01 83 e2 f7 88 50 01 48 83 c4 08 5b 5d f3 c3 0f 1f 80 00 00 00 00 83 e2 - f7 88 50 01 c3 66 0f 1f 84 00 00 00 00 00 0f 1f -RIP [<ffffffff8145b225>] skb_pull+0x5/0x50 - RSP <ffff88025ffe7d40> -CR2: 0000000000000080 ----[ end trace b074c0f90e7c997d ]--- - -[1] http://mid.gmane.org/20150430193259.GA5630@googlemail.com - -Cc: <stable@vger.kernel.org> # v3.18, v3.19, v4.0, v4.1 -Reported-by: Michael Hornung <mhornung.linux@gmail.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -500,11 +500,9 @@ static int brcmf_msgbuf_query_dcmd(struc - msgbuf->rx_pktids, - msgbuf->ioctl_resp_pktid); - if (msgbuf->ioctl_resp_ret_len != 0) { -- if (!skb) { -- brcmf_err("Invalid packet id idx recv'd %d\n", -- msgbuf->ioctl_resp_pktid); -+ if (!skb) - return -EBADF; -- } -+ - memcpy(buf, skb->data, (len < msgbuf->ioctl_resp_ret_len) ? - len : msgbuf->ioctl_resp_ret_len); - } -@@ -866,10 +864,8 @@ brcmf_msgbuf_process_txstatus(struct brc - flowid -= BRCMF_NROF_H2D_COMMON_MSGRINGS; - skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev, - msgbuf->tx_pktids, idx); -- if (!skb) { -- brcmf_err("Invalid packet id idx recv'd %d\n", idx); -+ if (!skb) - return; -- } - - set_bit(flowid, msgbuf->txstatus_done_map); - commonring = msgbuf->flowrings[flowid]; -@@ -1148,6 +1144,8 @@ brcmf_msgbuf_process_rx_complete(struct - - skb = brcmf_msgbuf_get_pktid(msgbuf->drvr->bus_if->dev, - msgbuf->rx_pktids, idx); -+ if (!skb) -+ return; - - if (data_offset) - skb_pull(skb, data_offset); diff --git a/package/kernel/mac80211/patches/346-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch b/package/kernel/mac80211/patches/346-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch deleted file mode 100644 index f0230347ef..0000000000 --- a/package/kernel/mac80211/patches/346-brcmfmac-fix-invalid-access-to-struct-acpi_device-fi.patch +++ /dev/null @@ -1,63 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 27 May 2015 19:31:41 +0200 -Subject: [PATCH] brcmfmac: fix invalid access to struct acpi_device fields - -The fields of struct acpi_device are only known when CONFIG_ACPI is -defined. Fix this by using a helper function. This will resolve the -issue found in linux-next: - - ../brcmfmac/bcmsdh.c: In function 'brcmf_ops_sdio_probe': - ../brcmfmac/bcmsdh.c:1139:7: error: dereferencing pointer to incomplete type - adev->flags.power_manageable = 0; - ^ - -Fixes: f0992ace680c ("brcmfmac: prohibit ACPI power management ...") -Cc: Fu, Zhonghui <zhonghui.fu@linux.intel.com> -Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -@@ -1117,6 +1117,18 @@ MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_id - static struct brcmfmac_sdio_platform_data *brcmfmac_sdio_pdata; - - -+static void brcmf_sdiod_acpi_set_power_manageable(struct device *dev, -+ int val) -+{ -+#if IS_ENABLED(CONFIG_ACPI) -+ struct acpi_device *adev; -+ -+ adev = ACPI_COMPANION(dev); -+ if (adev) -+ adev->flags.power_manageable = 0; -+#endif -+} -+ - static int brcmf_ops_sdio_probe(struct sdio_func *func, - const struct sdio_device_id *id) - { -@@ -1124,7 +1136,6 @@ static int brcmf_ops_sdio_probe(struct s - struct brcmf_sdio_dev *sdiodev; - struct brcmf_bus *bus_if; - struct device *dev; -- struct acpi_device *adev; - - brcmf_dbg(SDIO, "Enter\n"); - brcmf_dbg(SDIO, "Class=%x\n", func->class); -@@ -1132,11 +1143,9 @@ static int brcmf_ops_sdio_probe(struct s - brcmf_dbg(SDIO, "sdio device ID: 0x%04x\n", func->device); - brcmf_dbg(SDIO, "Function#: %d\n", func->num); - -- /* prohibit ACPI power management for this device */ - dev = &func->dev; -- adev = ACPI_COMPANION(dev); -- if (adev) -- adev->flags.power_manageable = 0; -+ /* prohibit ACPI power management for this device */ -+ brcmf_sdiod_acpi_set_power_manageable(dev, 0); - - /* Consume func num 1 but dont do anything with it. */ - if (func->num == 1) diff --git a/package/kernel/mac80211/patches/347-brcmfmac-simplify-check-stripping-v2-NVRAM.patch b/package/kernel/mac80211/patches/347-brcmfmac-simplify-check-stripping-v2-NVRAM.patch deleted file mode 100644 index 2bfd44f998..0000000000 --- a/package/kernel/mac80211/patches/347-brcmfmac-simplify-check-stripping-v2-NVRAM.patch +++ /dev/null @@ -1,56 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 20 May 2015 09:34:21 +0200 -Subject: [PATCH] brcmfmac: simplify check stripping v2 NVRAM -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Comparing NVRAM entry with a full filtering string is simpler than -comparing it with a short prefix and then checking random chars at magic -offsets. The cost of snprintf relatively low, we execute it just once. -Tested on BCM43602 with NVRAM hacked to use V2 format. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -25,7 +25,7 @@ - - #define BRCMF_FW_MAX_NVRAM_SIZE 64000 - #define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */ --#define BRCMF_FW_NVRAM_PCIEDEV_LEN 9 /* pcie/1/4/ */ -+#define BRCMF_FW_NVRAM_PCIEDEV_LEN 10 /* pcie/1/4/ + \0 */ - - char brcmf_firmware_path[BRCMF_FW_PATH_LEN]; - module_param_string(firmware_path, brcmf_firmware_path, -@@ -297,6 +297,8 @@ fail: - static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr, - u16 bus_nr) - { -+ char prefix[BRCMF_FW_NVRAM_PCIEDEV_LEN]; -+ size_t len; - u32 i, j; - u8 *nvram; - -@@ -308,14 +310,13 @@ static void brcmf_fw_strip_multi_v2(stru - * Valid entries are of type pcie/X/Y/ where X = domain_nr and - * Y = bus_nr. - */ -+ snprintf(prefix, sizeof(prefix), "pcie/%d/%d/", domain_nr, bus_nr); -+ len = strlen(prefix); - i = 0; - j = 0; -- while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) { -- if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) && -- (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') && -- ((nvp->nvram[i + 5] - '0') == domain_nr) && -- ((nvp->nvram[i + 7] - '0') == bus_nr)) { -- i += BRCMF_FW_NVRAM_PCIEDEV_LEN; -+ while (i < nvp->nvram_len - len) { -+ if (strncmp(&nvp->nvram[i], prefix, len) == 0) { -+ i += len; - while (nvp->nvram[i] != 0) { - nvram[j] = nvp->nvram[i]; - i++; diff --git a/package/kernel/mac80211/patches/348-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch b/package/kernel/mac80211/patches/348-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch deleted file mode 100644 index 0e65114f86..0000000000 --- a/package/kernel/mac80211/patches/348-brcmfmac-simplify-check-finding-NVRAM-v1-device-path.patch +++ /dev/null @@ -1,57 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 20 May 2015 11:01:08 +0200 -Subject: [PATCH] brcmfmac: simplify check finding NVRAM v1 device path -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -With a simple use of snprintf and small buffer we can compare NVRAM -entry value with a full string. This way we avoid checking random chars -at magic offsets. -Tested on BCM43602 with NVRAM hacked to use v1 format. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -222,6 +222,10 @@ static int brcmf_init_nvram_parser(struc - static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr, - u16 bus_nr) - { -+ /* Device path with a leading '=' key-value separator */ -+ char pcie_path[] = "=pcie/?/?"; -+ size_t pcie_len; -+ - u32 i, j; - bool found; - u8 *nvram; -@@ -238,6 +242,9 @@ static void brcmf_fw_strip_multi_v1(stru - /* First search for the devpathX and see if it is the configuration - * for domain_nr/bus_nr. Search complete nvp - */ -+ snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr, -+ bus_nr); -+ pcie_len = strlen(pcie_path); - found = false; - i = 0; - while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) { -@@ -245,13 +252,10 @@ static void brcmf_fw_strip_multi_v1(stru - * Y = domain_nr, Z = bus_nr, X = virtual ID - */ - if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) && -- (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) { -- if (((nvp->nvram[i + 14] - '0') == domain_nr) && -- ((nvp->nvram[i + 16] - '0') == bus_nr)) { -- id = nvp->nvram[i + 7] - '0'; -- found = true; -- break; -- } -+ (strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len) == 0)) { -+ id = nvp->nvram[i + 7] - '0'; -+ found = true; -+ break; - } - while (nvp->nvram[i] != 0) - i++; diff --git a/package/kernel/mac80211/patches/349-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch b/package/kernel/mac80211/patches/349-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch deleted file mode 100644 index dc174e5a3d..0000000000 --- a/package/kernel/mac80211/patches/349-brcmfmac-treat-0-as-end-of-comment-when-parsing-NVRA.patch +++ /dev/null @@ -1,45 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 20 May 2015 13:59:54 +0200 -Subject: [PATCH] brcmfmac: treat \0 as end of comment when parsing NVRAM -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes brcmfmac dealing with NVRAM coming from platform e.g. from a -flash MTD partition. In such cases entries are separated by \0 instead -of \n which caused ignoring whole content after the first "comment". -While platform NVRAM doesn't usually contain comments, we switch to -COMMENT state after e.g. finding an unexpected char in key name. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -162,17 +162,20 @@ brcmf_nvram_handle_value(struct nvram_pa - static enum nvram_parser_state - brcmf_nvram_handle_comment(struct nvram_parser *nvp) - { -- char *eol, *sol; -+ char *eoc, *sol; - - sol = (char *)&nvp->fwnv->data[nvp->pos]; -- eol = strchr(sol, '\n'); -- if (eol == NULL) -- return END; -+ eoc = strchr(sol, '\n'); -+ if (!eoc) { -+ eoc = strchr(sol, '\0'); -+ if (!eoc) -+ return END; -+ } - - /* eat all moving to next line */ - nvp->line++; - nvp->column = 1; -- nvp->pos += (eol - sol) + 1; -+ nvp->pos += (eoc - sol) + 1; - return IDLE; - } - diff --git a/package/kernel/mac80211/patches/350-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch b/package/kernel/mac80211/patches/350-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch deleted file mode 100644 index 5700142646..0000000000 --- a/package/kernel/mac80211/patches/350-brcmfmac-allow-NVRAM-values-to-contain-spaces.patch +++ /dev/null @@ -1,50 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sat, 23 May 2015 09:15:33 +0200 -Subject: [PATCH] brcmfmac: allow NVRAM values to contain spaces -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Platform NVRAMs often contain values with spaces. Even if right now most -firmware-supported entries are simple values, we shouldn't reject these -with spaces. It was semi-confirmed by Broadcom in the early patch adding -support for platform NVRAMs. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Acked-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -66,6 +66,12 @@ struct nvram_parser { - bool multi_dev_v2; - }; - -+/** -+ * is_nvram_char() - check if char is a valid one for NVRAM entry -+ * -+ * It accepts all printable ASCII chars except for '#' which opens a comment. -+ * Please note that ' ' (space) while accepted is not a valid key name char. -+ */ - static bool is_nvram_char(char c) - { - /* comment marker excluded */ -@@ -73,7 +79,7 @@ static bool is_nvram_char(char c) - return false; - - /* key and value may have any other readable character */ -- return (c > 0x20 && c < 0x7f); -+ return (c >= 0x20 && c < 0x7f); - } - - static bool is_whitespace(char c) -@@ -120,7 +126,7 @@ static enum nvram_parser_state brcmf_nvr - nvp->multi_dev_v1 = true; - if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0) - nvp->multi_dev_v2 = true; -- } else if (!is_nvram_char(c)) { -+ } else if (!is_nvram_char(c) || c == ' ') { - brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n", - nvp->line, nvp->column); - return COMMENT; diff --git a/package/kernel/mac80211/patches/351-ath9k-fix-DMA-stop-sequence-for-AR9003.patch b/package/kernel/mac80211/patches/351-ath9k-fix-DMA-stop-sequence-for-AR9003.patch deleted file mode 100644 index 814b0d7a4a..0000000000 --- a/package/kernel/mac80211/patches/351-ath9k-fix-DMA-stop-sequence-for-AR9003.patch +++ /dev/null @@ -1,33 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Tue, 2 Jun 2015 10:35:46 +0200 -Subject: [PATCH] ath9k: fix DMA stop sequence for AR9003+ - -AR93xx and newer needs to stop rx before tx to avoid getting the DMA -engine or MAC into a stuck state. -This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam. - -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -216,11 +216,13 @@ static bool ath_prepare_reset(struct ath - ath_stop_ani(sc); - ath9k_hw_disable_interrupts(ah); - -- if (!ath_drain_all_txq(sc)) -- ret = false; -- -- if (!ath_stoprecv(sc)) -- ret = false; -+ if (AR_SREV_9300_20_OR_LATER(ah)) { -+ ret &= ath_stoprecv(sc); -+ ret &= ath_drain_all_txq(sc); -+ } else { -+ ret &= ath_drain_all_txq(sc); -+ ret &= ath_stoprecv(sc); -+ } - - return ret; - } diff --git a/package/kernel/mac80211/patches/352-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch b/package/kernel/mac80211/patches/352-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch deleted file mode 100644 index 7bbd57e15e..0000000000 --- a/package/kernel/mac80211/patches/352-brcmfmac-support-NVRAMs-containing-pci-devpaths-inst.patch +++ /dev/null @@ -1,56 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 28 May 2015 14:19:21 +0200 -Subject: [PATCH] brcmfmac: support NVRAMs containing pci devpaths (instead of - pcie) -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Recently Broadcom added support for NVRAMs with entries for multiple -PCIe devices. One of the supported formats is based on prefixes defined -like: devpath0=pcie/1/4/ and entries like 0:foo=bar 0:baz=qux etc. - -Unfortunately there are also a bit older devices using different way of -defining prefixes, e.g. SmartRG SR400ac (2 x BCM43602) with entries: -devpath0=pci/1/1/ -devpath1=pci/2/1 -Broadcom stated this old format will never be used/supported by brcmfmac -but given the simplicity of this patch I'll insist on supporting it. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -232,6 +232,8 @@ static void brcmf_fw_strip_multi_v1(stru - u16 bus_nr) - { - /* Device path with a leading '=' key-value separator */ -+ char pci_path[] = "=pci/?/?"; -+ size_t pci_len; - char pcie_path[] = "=pcie/?/?"; - size_t pcie_len; - -@@ -251,6 +253,9 @@ static void brcmf_fw_strip_multi_v1(stru - /* First search for the devpathX and see if it is the configuration - * for domain_nr/bus_nr. Search complete nvp - */ -+ snprintf(pci_path, sizeof(pci_path), "=pci/%d/%d", domain_nr, -+ bus_nr); -+ pci_len = strlen(pci_path); - snprintf(pcie_path, sizeof(pcie_path), "=pcie/%d/%d", domain_nr, - bus_nr); - pcie_len = strlen(pcie_path); -@@ -260,8 +265,9 @@ static void brcmf_fw_strip_multi_v1(stru - /* Format: devpathX=pcie/Y/Z/ - * Y = domain_nr, Z = bus_nr, X = virtual ID - */ -- if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) && -- (strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len) == 0)) { -+ if (strncmp(&nvp->nvram[i], "devpath", 7) == 0 && -+ (!strncmp(&nvp->nvram[i + 8], pci_path, pci_len) || -+ !strncmp(&nvp->nvram[i + 8], pcie_path, pcie_len))) { - id = nvp->nvram[i + 7] - '0'; - found = true; - break; diff --git a/package/kernel/mac80211/patches/353-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch b/package/kernel/mac80211/patches/353-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch deleted file mode 100644 index 1eff6ed83a..0000000000 --- a/package/kernel/mac80211/patches/353-brcmfmac-set-wiphy-perm_addr-to-hardware-MAC-address.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 31 May 2015 02:52:26 +0200 -Subject: [PATCH] brcmfmac: set wiphy perm_addr to hardware MAC address -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This allows e.g. user space to use /sys/class/ieee80211/*/macaddress - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -6070,6 +6070,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802 - brcmf_err("Could not allocate wiphy device\n"); - return NULL; - } -+ memcpy(wiphy->perm_addr, drvr->mac, ETH_ALEN); - set_wiphy_dev(wiphy, busdev); - - cfg = wiphy_priv(wiphy); diff --git a/package/kernel/mac80211/patches/354-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch b/package/kernel/mac80211/patches/354-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch deleted file mode 100644 index c6e83ddd29..0000000000 --- a/package/kernel/mac80211/patches/354-brcmfmac-use-direct-data-pointer-in-NVRAM-parser-str.patch +++ /dev/null @@ -1,144 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 4 Jun 2015 22:11:07 +0200 -Subject: [PATCH] brcmfmac: use direct data pointer in NVRAM parser struct -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -As we plan to add support for platform NVRAM we should store direct -data pointer without the extra struct firmware layer. This will allow -us to support other sources with the only requirement being u8 buffer. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Acked-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -43,7 +43,7 @@ enum nvram_parser_state { - * struct nvram_parser - internal info for parser. - * - * @state: current parser state. -- * @fwnv: input buffer being parsed. -+ * @data: input buffer being parsed. - * @nvram: output buffer with parse result. - * @nvram_len: lenght of parse result. - * @line: current line. -@@ -55,7 +55,7 @@ enum nvram_parser_state { - */ - struct nvram_parser { - enum nvram_parser_state state; -- const struct firmware *fwnv; -+ const u8 *data; - u8 *nvram; - u32 nvram_len; - u32 line; -@@ -91,7 +91,7 @@ static enum nvram_parser_state brcmf_nvr - { - char c; - -- c = nvp->fwnv->data[nvp->pos]; -+ c = nvp->data[nvp->pos]; - if (c == '\n') - return COMMENT; - if (is_whitespace(c)) -@@ -115,16 +115,16 @@ static enum nvram_parser_state brcmf_nvr - enum nvram_parser_state st = nvp->state; - char c; - -- c = nvp->fwnv->data[nvp->pos]; -+ c = nvp->data[nvp->pos]; - if (c == '=') { - /* ignore RAW1 by treating as comment */ -- if (strncmp(&nvp->fwnv->data[nvp->entry], "RAW1", 4) == 0) -+ if (strncmp(&nvp->data[nvp->entry], "RAW1", 4) == 0) - st = COMMENT; - else - st = VALUE; -- if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0) -+ if (strncmp(&nvp->data[nvp->entry], "devpath", 7) == 0) - nvp->multi_dev_v1 = true; -- if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0) -+ if (strncmp(&nvp->data[nvp->entry], "pcie/", 5) == 0) - nvp->multi_dev_v2 = true; - } else if (!is_nvram_char(c) || c == ' ') { - brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n", -@@ -145,11 +145,11 @@ brcmf_nvram_handle_value(struct nvram_pa - char *ekv; - u32 cplen; - -- c = nvp->fwnv->data[nvp->pos]; -+ c = nvp->data[nvp->pos]; - if (!is_nvram_char(c)) { - /* key,value pair complete */ -- ekv = (u8 *)&nvp->fwnv->data[nvp->pos]; -- skv = (u8 *)&nvp->fwnv->data[nvp->entry]; -+ ekv = (u8 *)&nvp->data[nvp->pos]; -+ skv = (u8 *)&nvp->data[nvp->entry]; - cplen = ekv - skv; - if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE) - return END; -@@ -170,7 +170,7 @@ brcmf_nvram_handle_comment(struct nvram_ - { - char *eoc, *sol; - -- sol = (char *)&nvp->fwnv->data[nvp->pos]; -+ sol = (char *)&nvp->data[nvp->pos]; - eoc = strchr(sol, '\n'); - if (!eoc) { - eoc = strchr(sol, '\0'); -@@ -201,17 +201,17 @@ static enum nvram_parser_state - }; - - static int brcmf_init_nvram_parser(struct nvram_parser *nvp, -- const struct firmware *nv) -+ const u8 *data, size_t data_len) - { - size_t size; - - memset(nvp, 0, sizeof(*nvp)); -- nvp->fwnv = nv; -+ nvp->data = data; - /* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */ -- if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE) -+ if (data_len > BRCMF_FW_MAX_NVRAM_SIZE) - size = BRCMF_FW_MAX_NVRAM_SIZE; - else -- size = nv->size; -+ size = data_len; - /* Alloc for extra 0 byte + roundup by 4 + length field */ - size += 1 + 3 + sizeof(u32); - nvp->nvram = kzalloc(size, GFP_KERNEL); -@@ -362,18 +362,18 @@ fail: - * and converts newlines to NULs. Shortens buffer as needed and pads with NULs. - * End of buffer is completed with token identifying length of buffer. - */ --static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length, -- u16 domain_nr, u16 bus_nr) -+static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len, -+ u32 *new_length, u16 domain_nr, u16 bus_nr) - { - struct nvram_parser nvp; - u32 pad; - u32 token; - __le32 token_le; - -- if (brcmf_init_nvram_parser(&nvp, nv) < 0) -+ if (brcmf_init_nvram_parser(&nvp, data, data_len) < 0) - return NULL; - -- while (nvp.pos < nv->size) { -+ while (nvp.pos < data_len) { - nvp.state = nv_parser_states[nvp.state](&nvp); - if (nvp.state == END) - break; -@@ -432,7 +432,7 @@ static void brcmf_fw_request_nvram_done( - goto fail; - - if (fw) { -- nvram = brcmf_fw_nvram_strip(fw, &nvram_length, -+ nvram = brcmf_fw_nvram_strip(fw->data, fw->size, &nvram_length, - fwctx->domain_nr, fwctx->bus_nr); - release_firmware(fw); - if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL)) diff --git a/package/kernel/mac80211/patches/355-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch b/package/kernel/mac80211/patches/355-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch deleted file mode 100644 index 4ecef3b5af..0000000000 --- a/package/kernel/mac80211/patches/355-b43-fix-support-for-14e4-4321-PCI-dev-with-BCM4321-c.patch +++ /dev/null @@ -1,32 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sat, 6 Jun 2015 22:45:59 +0200 -Subject: [PATCH] b43: fix support for 14e4:4321 PCI dev with BCM4321 chipset -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It seems Broadcom released two devices with conflicting device id. There -are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they -can be found in routers, e.g. Netgear WNR834Bv2. However, according to -Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY). -It's unsure if they meant PCI device id, or "virtual" id (from SPROM). -To distinguish these devices lets check PHY type (G vs. N). - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Cc: <stable@vger.kernel.org> # 3.16+ -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c -@@ -5365,6 +5365,10 @@ static void b43_supported_bands(struct b - *have_5ghz_phy = true; - return; - case 0x4321: /* BCM4306 */ -+ /* There are 14e4:4321 PCI devs with 2.4 GHz BCM4321 (N-PHY) */ -+ if (dev->phy.type != B43_PHYTYPE_G) -+ break; -+ /* fall through */ - case 0x4313: /* BCM4311 */ - case 0x431a: /* BCM4318 */ - case 0x432a: /* BCM4321 */ diff --git a/package/kernel/mac80211/patches/357-0001-brcmfmac-Update-msgbuf-read-pointer-quicker.patch b/package/kernel/mac80211/patches/357-0001-brcmfmac-Update-msgbuf-read-pointer-quicker.patch deleted file mode 100644 index 74df9f93f7..0000000000 --- a/package/kernel/mac80211/patches/357-0001-brcmfmac-Update-msgbuf-read-pointer-quicker.patch +++ /dev/null @@ -1,109 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Mon, 8 Jun 2015 14:38:32 +0200 -Subject: [PATCH] brcmfmac: Update msgbuf read pointer quicker. - -On device to host data using msgbuf the read pointer gets updated -once all data is processed. Updating this pointer more frequently -allows the firmware to add more data quicker. This will result in -slightly higher and more stable throughput on CPU bounded host -processors. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.c -@@ -223,8 +223,6 @@ void brcmf_commonring_write_cancel(struc - void *brcmf_commonring_get_read_ptr(struct brcmf_commonring *commonring, - u16 *n_items) - { -- void *ret_addr; -- - if (commonring->cr_update_wptr) - commonring->cr_update_wptr(commonring->cr_ctx); - -@@ -235,19 +233,18 @@ void *brcmf_commonring_get_read_ptr(stru - if (*n_items == 0) - return NULL; - -- ret_addr = commonring->buf_addr + -- (commonring->r_ptr * commonring->item_len); -- -- commonring->r_ptr += *n_items; -- if (commonring->r_ptr == commonring->depth) -- commonring->r_ptr = 0; -- -- return ret_addr; -+ return commonring->buf_addr + -+ (commonring->r_ptr * commonring->item_len); - } - - --int brcmf_commonring_read_complete(struct brcmf_commonring *commonring) -+int brcmf_commonring_read_complete(struct brcmf_commonring *commonring, -+ u16 n_items) - { -+ commonring->r_ptr += n_items; -+ if (commonring->r_ptr == commonring->depth) -+ commonring->r_ptr = 0; -+ - if (commonring->cr_write_rptr) - return commonring->cr_write_rptr(commonring->cr_ctx); - ---- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.h -@@ -62,7 +62,8 @@ void brcmf_commonring_write_cancel(struc - u16 n_items); - void *brcmf_commonring_get_read_ptr(struct brcmf_commonring *commonring, - u16 *n_items); --int brcmf_commonring_read_complete(struct brcmf_commonring *commonring); -+int brcmf_commonring_read_complete(struct brcmf_commonring *commonring, -+ u16 n_items); - - #define brcmf_commonring_n_items(commonring) (commonring->depth) - #define brcmf_commonring_len_item(commonring) (commonring->item_len) ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -75,6 +75,8 @@ - - #define BRCMF_MSGBUF_DELAY_TXWORKER_THRS 96 - #define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS 32 -+#define BRCMF_MSGBUF_UPDATE_RX_PTR_THRS 48 -+ - - struct msgbuf_common_hdr { - u8 msgtype; -@@ -1257,19 +1259,27 @@ static void brcmf_msgbuf_process_rx(stru - { - void *buf; - u16 count; -+ u16 processed; - - again: - buf = brcmf_commonring_get_read_ptr(commonring, &count); - if (buf == NULL) - return; - -+ processed = 0; - while (count) { - brcmf_msgbuf_process_msgtype(msgbuf, - buf + msgbuf->rx_dataoffset); - buf += brcmf_commonring_len_item(commonring); -+ processed++; -+ if (processed == BRCMF_MSGBUF_UPDATE_RX_PTR_THRS) { -+ brcmf_commonring_read_complete(commonring, processed); -+ processed = 0; -+ } - count--; - } -- brcmf_commonring_read_complete(commonring); -+ if (processed) -+ brcmf_commonring_read_complete(commonring, processed); - - if (commonring->r_ptr == 0) - goto again; diff --git a/package/kernel/mac80211/patches/357-0002-brcmfmac-remove-chipinfo-debugfs-entry.patch b/package/kernel/mac80211/patches/357-0002-brcmfmac-remove-chipinfo-debugfs-entry.patch deleted file mode 100644 index 9e5b48608d..0000000000 --- a/package/kernel/mac80211/patches/357-0002-brcmfmac-remove-chipinfo-debugfs-entry.patch +++ /dev/null @@ -1,39 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Mon, 8 Jun 2015 14:38:33 +0200 -Subject: [PATCH] brcmfmac: remove chipinfo debugfs entry - -The information provided by chipinfo is also provided by the -revinfo debugfs entry. Removing it from debugfs. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c -@@ -41,15 +41,6 @@ void brcmf_debugfs_exit(void) - root_folder = NULL; - } - --static int brcmf_debugfs_chipinfo_read(struct seq_file *seq, void *data) --{ -- struct brcmf_bus *bus = dev_get_drvdata(seq->private); -- -- seq_printf(seq, "chip: %x(%u) rev %u\n", -- bus->chip, bus->chip, bus->chiprev); -- return 0; --} -- - int brcmf_debugfs_attach(struct brcmf_pub *drvr) - { - struct device *dev = drvr->bus_if->dev; -@@ -58,7 +49,6 @@ int brcmf_debugfs_attach(struct brcmf_pu - return -ENODEV; - - drvr->dbgfs_dir = debugfs_create_dir(dev_name(dev), root_folder); -- brcmf_debugfs_add_entry(drvr, "chipinfo", brcmf_debugfs_chipinfo_read); - - return PTR_ERR_OR_ZERO(drvr->dbgfs_dir); - } diff --git a/package/kernel/mac80211/patches/357-0003-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch b/package/kernel/mac80211/patches/357-0003-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch deleted file mode 100644 index c38b2cd150..0000000000 --- a/package/kernel/mac80211/patches/357-0003-brcmfmac-remove-watchdog-reset-from-brcmf_pcie_busco.patch +++ /dev/null @@ -1,53 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Mon, 8 Jun 2015 14:38:34 +0200 -Subject: [PATCH] brcmfmac: remove watchdog reset from - brcmf_pcie_buscoreprep() - -The watchdog reset as done in brcmf_pcie_buscoreprep() is not -sufficient. It needs to modify PCIe core registers as well -which is properly done by brcmf_pcie_reset_device() after the -chip recognition is done. So the faulty watchdog reset can be -removed as it was causing driver reload to fail and hang the -system requiring a power-cycle. Instead the call to to the -brcmf_pcie_reset_device() function is done twice in the unload. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -1629,20 +1629,7 @@ static void brcmf_pcie_buscore_write32(v - - static int brcmf_pcie_buscoreprep(void *ctx) - { -- struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx; -- int err; -- -- err = brcmf_pcie_get_resource(devinfo); -- if (err == 0) { -- /* Set CC watchdog to reset all the cores on the chip to bring -- * back dongle to a sane state. -- */ -- brcmf_pcie_buscore_write32(ctx, CORE_CC_REG(SI_ENUM_BASE, -- watchdog), 4); -- msleep(100); -- } -- -- return err; -+ return brcmf_pcie_get_resource(ctx); - } - - -@@ -1824,6 +1811,7 @@ brcmf_pcie_remove(struct pci_dev *pdev) - brcmf_pcie_intr_disable(devinfo); - - brcmf_detach(&pdev->dev); -+ brcmf_pcie_reset_device(devinfo); - - kfree(bus->bus_priv.pcie); - kfree(bus->msgbuf->flowrings); diff --git a/package/kernel/mac80211/patches/357-0004-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch b/package/kernel/mac80211/patches/357-0004-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch deleted file mode 100644 index 756fbb2cb7..0000000000 --- a/package/kernel/mac80211/patches/357-0004-brcmfmac-use-debugfs_create_devm_seqfile-helper-func.patch +++ /dev/null @@ -1,69 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Mon, 8 Jun 2015 14:38:35 +0200 -Subject: [PATCH] brcmfmac: use debugfs_create_devm_seqfile() helper - function - -Some time ago the function debugfs_create_devm_seqfile() was -introduced in debugfs. The caller simply needs to provide a -device pointer and read function. The function brcmf_debugfs_add_entry() -is now simply a wrapper only doing the work for CONFIG_BRCMDBG. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c -@@ -64,44 +64,12 @@ struct dentry *brcmf_debugfs_get_devdir( - return drvr->dbgfs_dir; - } - --struct brcmf_debugfs_entry { -- int (*read)(struct seq_file *seq, void *data); -- struct brcmf_pub *drvr; --}; -- --static int brcmf_debugfs_entry_open(struct inode *inode, struct file *f) --{ -- struct brcmf_debugfs_entry *entry = inode->i_private; -- -- return single_open(f, entry->read, entry->drvr->bus_if->dev); --} -- --static const struct file_operations brcmf_debugfs_def_ops = { -- .owner = THIS_MODULE, -- .open = brcmf_debugfs_entry_open, -- .release = single_release, -- .read = seq_read, -- .llseek = seq_lseek --}; -- - int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn, - int (*read_fn)(struct seq_file *seq, void *data)) - { -- struct dentry *dentry = drvr->dbgfs_dir; -- struct brcmf_debugfs_entry *entry; -- -- if (IS_ERR_OR_NULL(dentry)) -- return -ENOENT; -- -- entry = devm_kzalloc(drvr->bus_if->dev, sizeof(*entry), GFP_KERNEL); -- if (!entry) -- return -ENOMEM; -- -- entry->read = read_fn; -- entry->drvr = drvr; -- -- dentry = debugfs_create_file(fn, S_IRUGO, dentry, entry, -- &brcmf_debugfs_def_ops); -+ struct dentry *e; - -- return PTR_ERR_OR_ZERO(dentry); -+ e = debugfs_create_devm_seqfile(drvr->bus_if->dev, fn, -+ drvr->dbgfs_dir, read_fn); -+ return PTR_ERR_OR_ZERO(e); - } diff --git a/package/kernel/mac80211/patches/358-ath9k_hw-fix-device-ID-check-for-AR956x.patch b/package/kernel/mac80211/patches/358-ath9k_hw-fix-device-ID-check-for-AR956x.patch deleted file mode 100644 index 2674efb91f..0000000000 --- a/package/kernel/mac80211/patches/358-ath9k_hw-fix-device-ID-check-for-AR956x.patch +++ /dev/null @@ -1,20 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Sun, 21 Jun 2015 19:45:59 +0200 -Subject: [PATCH] ath9k_hw: fix device ID check for AR956x - -Because of the missing return, the macVersion value was being -overwritten with an invalid register read - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -278,6 +278,7 @@ static void ath9k_hw_read_revisions(stru - return; - case AR9300_DEVID_QCA956X: - ah->hw_version.macVersion = AR_SREV_VERSION_9561; -+ return; - } - - val = REG_READ(ah, AR_SREV) & AR_SREV_ID; diff --git a/package/kernel/mac80211/patches/359-0001-brcmfmac-Check-if-firmware-supports-p2p.patch b/package/kernel/mac80211/patches/359-0001-brcmfmac-Check-if-firmware-supports-p2p.patch deleted file mode 100644 index ff24a4a06f..0000000000 --- a/package/kernel/mac80211/patches/359-0001-brcmfmac-Check-if-firmware-supports-p2p.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Pontus Fuchs <pontusf@broadcom.com> -Date: Thu, 11 Jun 2015 00:12:17 +0200 -Subject: [PATCH] brcmfmac: Check if firmware supports p2p - -Add a feature flag to reflect the firmware's p2p capability. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Signed-off-by: Pontus Fuchs <pontusf@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c -@@ -129,6 +129,7 @@ void brcmf_feat_attach(struct brcmf_pub - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl"); - if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID) - brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0); -+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p"); - - /* set chip related quirks */ - switch (drvr->bus_if->chip) { ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h -@@ -23,12 +23,14 @@ - * MCHAN: multi-channel for concurrent P2P. - * PNO: preferred network offload. - * WOWL: Wake-On-WLAN. -+ * P2P: peer-to-peer - */ - #define BRCMF_FEAT_LIST \ - BRCMF_FEAT_DEF(MBSS) \ - BRCMF_FEAT_DEF(MCHAN) \ - BRCMF_FEAT_DEF(PNO) \ -- BRCMF_FEAT_DEF(WOWL) -+ BRCMF_FEAT_DEF(WOWL) \ -+ BRCMF_FEAT_DEF(P2P) - /* - * Quirks: - * diff --git a/package/kernel/mac80211/patches/359-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch b/package/kernel/mac80211/patches/359-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch deleted file mode 100644 index 3876ba01da..0000000000 --- a/package/kernel/mac80211/patches/359-0002-brcmfmac-Build-wiphy-mode-and-interface-combinations.patch +++ /dev/null @@ -1,198 +0,0 @@ -From: Pontus Fuchs <pontusf@broadcom.com> -Date: Thu, 11 Jun 2015 00:12:18 +0200 -Subject: [PATCH] brcmfmac: Build wiphy mode and interface combinations - dynamically - -Switch from using semi hard coded interface combinations. This makes -it easier to announce what the firmware actually supports. This fixes -the case where brcmfmac announces p2p but the firmware doesn't -support it. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Signed-off-by: Pontus Fuchs <pontusf@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -52,8 +52,6 @@ - #define BRCMF_PNO_SCAN_COMPLETE 1 - #define BRCMF_PNO_SCAN_INCOMPLETE 0 - --#define BRCMF_IFACE_MAX_CNT 3 -- - #define WPA_OUI "\x00\x50\xF2" /* WPA OUI */ - #define WPA_OUI_TYPE 1 - #define RSN_OUI "\x00\x0F\xAC" /* RSN OUI */ -@@ -5639,53 +5637,6 @@ static int brcmf_setup_wiphybands(struct - return 0; - } - --static const struct ieee80211_iface_limit brcmf_iface_limits_mbss[] = { -- { -- .max = 1, -- .types = BIT(NL80211_IFTYPE_STATION) | -- BIT(NL80211_IFTYPE_ADHOC) -- }, -- { -- .max = 4, -- .types = BIT(NL80211_IFTYPE_AP) -- }, -- { -- .max = 1, -- .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | -- BIT(NL80211_IFTYPE_P2P_GO) -- }, -- { -- .max = 1, -- .types = BIT(NL80211_IFTYPE_P2P_DEVICE) -- } --}; -- --static const struct ieee80211_iface_limit brcmf_iface_limits_sbss[] = { -- { -- .max = 2, -- .types = BIT(NL80211_IFTYPE_STATION) | -- BIT(NL80211_IFTYPE_ADHOC) | -- BIT(NL80211_IFTYPE_AP) -- }, -- { -- .max = 1, -- .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | -- BIT(NL80211_IFTYPE_P2P_GO) -- }, -- { -- .max = 1, -- .types = BIT(NL80211_IFTYPE_P2P_DEVICE) -- } --}; --static struct ieee80211_iface_combination brcmf_iface_combos[] = { -- { -- .max_interfaces = BRCMF_IFACE_MAX_CNT, -- .num_different_channels = 1, -- .n_limits = ARRAY_SIZE(brcmf_iface_limits_sbss), -- .limits = brcmf_iface_limits_sbss, -- } --}; -- - static const struct ieee80211_txrx_stypes - brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = { - [NL80211_IFTYPE_STATION] = { -@@ -5715,6 +5666,67 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = - } - }; - -+static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp) -+{ -+ struct ieee80211_iface_combination *combo = NULL; -+ struct ieee80211_iface_limit *limits = NULL; -+ int i = 0, max_iface_cnt; -+ -+ combo = kzalloc(sizeof(*combo), GFP_KERNEL); -+ if (!combo) -+ goto err; -+ -+ limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL); -+ if (!limits) -+ goto err; -+ -+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | -+ BIT(NL80211_IFTYPE_ADHOC) | -+ BIT(NL80211_IFTYPE_AP); -+ -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN)) -+ combo->num_different_channels = 2; -+ else -+ combo->num_different_channels = 1; -+ -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) { -+ limits[i].max = 1; -+ limits[i++].types = BIT(NL80211_IFTYPE_STATION); -+ limits[i].max = 4; -+ limits[i++].types = BIT(NL80211_IFTYPE_AP); -+ max_iface_cnt = 5; -+ } else { -+ limits[i].max = 2; -+ limits[i++].types = BIT(NL80211_IFTYPE_STATION) | -+ BIT(NL80211_IFTYPE_AP); -+ max_iface_cnt = 2; -+ } -+ -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) { -+ wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) | -+ BIT(NL80211_IFTYPE_P2P_GO) | -+ BIT(NL80211_IFTYPE_P2P_DEVICE); -+ limits[i].max = 1; -+ limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) | -+ BIT(NL80211_IFTYPE_P2P_GO); -+ limits[i].max = 1; -+ limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE); -+ max_iface_cnt += 2; -+ } -+ combo->max_interfaces = max_iface_cnt; -+ combo->limits = limits; -+ combo->n_limits = i; -+ -+ wiphy->iface_combinations = combo; -+ wiphy->n_iface_combinations = 1; -+ return 0; -+ -+err: -+ kfree(limits); -+ kfree(combo); -+ return -ENOMEM; -+} -+ - static void brcmf_wiphy_pno_params(struct wiphy *wiphy) - { - /* scheduled scan settings */ -@@ -5745,7 +5757,6 @@ static void brcmf_wiphy_wowl_params(stru - static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp) - { - struct ieee80211_supported_band *band; -- struct ieee80211_iface_combination ifc_combo; - __le32 bandlist[3]; - u32 n_bands; - int err, i; -@@ -5753,24 +5764,11 @@ static int brcmf_setup_wiphy(struct wiph - wiphy->max_scan_ssids = WL_NUM_SCAN_MAX; - wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX; - wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX; -- wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | -- BIT(NL80211_IFTYPE_ADHOC) | -- BIT(NL80211_IFTYPE_AP) | -- BIT(NL80211_IFTYPE_P2P_CLIENT) | -- BIT(NL80211_IFTYPE_P2P_GO) | -- BIT(NL80211_IFTYPE_P2P_DEVICE); -- /* need VSDB firmware feature for concurrent channels */ -- ifc_combo = brcmf_iface_combos[0]; -- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN)) -- ifc_combo.num_different_channels = 2; -- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) { -- ifc_combo.n_limits = ARRAY_SIZE(brcmf_iface_limits_mbss), -- ifc_combo.limits = brcmf_iface_limits_mbss; -- } -- wiphy->iface_combinations = kmemdup(&ifc_combo, -- sizeof(ifc_combo), -- GFP_KERNEL); -- wiphy->n_iface_combinations = ARRAY_SIZE(brcmf_iface_combos); -+ -+ err = brcmf_setup_ifmodes(wiphy, ifp); -+ if (err) -+ return err; -+ - wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; - wiphy->cipher_suites = __wl_cipher_suites; - wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); -@@ -6035,6 +6033,8 @@ static void brcmf_free_wiphy(struct wiph - if (!wiphy) - return; - -+ if (wiphy->iface_combinations) -+ kfree(wiphy->iface_combinations->limits); - kfree(wiphy->iface_combinations); - if (wiphy->bands[IEEE80211_BAND_2GHZ]) { - kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels); diff --git a/package/kernel/mac80211/patches/359-0003-brcmfmac-rework-.get_station-callback.patch b/package/kernel/mac80211/patches/359-0003-brcmfmac-rework-.get_station-callback.patch deleted file mode 100644 index 7bd06869da..0000000000 --- a/package/kernel/mac80211/patches/359-0003-brcmfmac-rework-.get_station-callback.patch +++ /dev/null @@ -1,326 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 11 Jun 2015 00:12:19 +0200 -Subject: [PATCH] brcmfmac: rework .get_station() callback - -The .get_station() cfg80211 callback is used in several scenarios. In -managed mode it can obtain information about the access-point and its -BSS parameters. In managed mode it can also obtain information about -TDLS peers. In AP mode it can obtain information about connected -clients. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -2395,27 +2395,80 @@ brcmf_cfg80211_reconfigure_wep(struct br - brcmf_err("set wsec error (%d)\n", err); - } - -+static void brcmf_convert_sta_flags(u32 fw_sta_flags, struct station_info *si) -+{ -+ struct nl80211_sta_flag_update *sfu; -+ -+ brcmf_dbg(TRACE, "flags %08x\n", fw_sta_flags); -+ si->filled |= BIT(NL80211_STA_INFO_STA_FLAGS); -+ sfu = &si->sta_flags; -+ sfu->mask = BIT(NL80211_STA_FLAG_WME) | -+ BIT(NL80211_STA_FLAG_AUTHENTICATED) | -+ BIT(NL80211_STA_FLAG_ASSOCIATED) | -+ BIT(NL80211_STA_FLAG_AUTHORIZED); -+ if (fw_sta_flags & BRCMF_STA_WME) -+ sfu->set |= BIT(NL80211_STA_FLAG_WME); -+ if (fw_sta_flags & BRCMF_STA_AUTHE) -+ sfu->set |= BIT(NL80211_STA_FLAG_AUTHENTICATED); -+ if (fw_sta_flags & BRCMF_STA_ASSOC) -+ sfu->set |= BIT(NL80211_STA_FLAG_ASSOCIATED); -+ if (fw_sta_flags & BRCMF_STA_AUTHO) -+ sfu->set |= BIT(NL80211_STA_FLAG_AUTHORIZED); -+} -+ -+static void brcmf_fill_bss_param(struct brcmf_if *ifp, struct station_info *si) -+{ -+ struct { -+ __le32 len; -+ struct brcmf_bss_info_le bss_le; -+ } *buf; -+ u16 capability; -+ int err; -+ -+ buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); -+ if (!buf) -+ return; -+ -+ buf->len = cpu_to_le32(WL_BSS_INFO_MAX); -+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, buf, -+ WL_BSS_INFO_MAX); -+ if (err) { -+ brcmf_err("Failed to get bss info (%d)\n", err); -+ return; -+ } -+ si->filled |= BIT(NL80211_STA_INFO_BSS_PARAM); -+ si->bss_param.beacon_interval = le16_to_cpu(buf->bss_le.beacon_period); -+ si->bss_param.dtim_period = buf->bss_le.dtim_period; -+ capability = le16_to_cpu(buf->bss_le.capability); -+ if (capability & IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT) -+ si->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT; -+ if (capability & WLAN_CAPABILITY_SHORT_PREAMBLE) -+ si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE; -+ if (capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) -+ si->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME; -+} -+ - static s32 - brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, - const u8 *mac, struct station_info *sinfo) - { - struct brcmf_if *ifp = netdev_priv(ndev); -- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; -- struct brcmf_scb_val_le scb_val; -- int rssi; -- s32 rate; - s32 err = 0; -- u8 *bssid = profile->bssid; - struct brcmf_sta_info_le sta_info_le; -- u32 beacon_period; -- u32 dtim_period; -+ u32 sta_flags; -+ u32 is_tdls_peer; - - brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac); - if (!check_vif_up(ifp->vif)) - return -EIO; - -- if (brcmf_is_apmode(ifp->vif)) { -- memcpy(&sta_info_le, mac, ETH_ALEN); -+ memset(&sta_info_le, 0, sizeof(sta_info_le)); -+ memcpy(&sta_info_le, mac, ETH_ALEN); -+ err = brcmf_fil_iovar_data_get(ifp, "tdls_sta_info", -+ &sta_info_le, -+ sizeof(sta_info_le)); -+ is_tdls_peer = !err; -+ if (err) { - err = brcmf_fil_iovar_data_get(ifp, "sta_info", - &sta_info_le, - sizeof(sta_info_le)); -@@ -2423,73 +2476,48 @@ brcmf_cfg80211_get_station(struct wiphy - brcmf_err("GET STA INFO failed, %d\n", err); - goto done; - } -- sinfo->filled = BIT(NL80211_STA_INFO_INACTIVE_TIME); -- sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000; -- if (le32_to_cpu(sta_info_le.flags) & BRCMF_STA_ASSOC) { -- sinfo->filled |= BIT(NL80211_STA_INFO_CONNECTED_TIME); -- sinfo->connected_time = le32_to_cpu(sta_info_le.in); -- } -- brcmf_dbg(TRACE, "STA idle time : %d ms, connected time :%d sec\n", -- sinfo->inactive_time, sinfo->connected_time); -- } else if (ifp->vif->wdev.iftype == NL80211_IFTYPE_STATION) { -- if (memcmp(mac, bssid, ETH_ALEN)) { -- brcmf_err("Wrong Mac address cfg_mac-%pM wl_bssid-%pM\n", -- mac, bssid); -- err = -ENOENT; -- goto done; -- } -- /* Report the current tx rate */ -- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_RATE, &rate); -- if (err) { -- brcmf_err("Could not get rate (%d)\n", err); -- goto done; -- } else { -+ } -+ brcmf_dbg(TRACE, "version %d\n", le16_to_cpu(sta_info_le.ver)); -+ sinfo->filled = BIT(NL80211_STA_INFO_INACTIVE_TIME); -+ sinfo->inactive_time = le32_to_cpu(sta_info_le.idle) * 1000; -+ sta_flags = le32_to_cpu(sta_info_le.flags); -+ brcmf_convert_sta_flags(sta_flags, sinfo); -+ sinfo->sta_flags.mask |= BIT(NL80211_STA_FLAG_TDLS_PEER); -+ if (is_tdls_peer) -+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER); -+ else -+ sinfo->sta_flags.set &= ~BIT(NL80211_STA_FLAG_TDLS_PEER); -+ if (sta_flags & BRCMF_STA_ASSOC) { -+ sinfo->filled |= BIT(NL80211_STA_INFO_CONNECTED_TIME); -+ sinfo->connected_time = le32_to_cpu(sta_info_le.in); -+ brcmf_fill_bss_param(ifp, sinfo); -+ } -+ if (sta_flags & BRCMF_STA_SCBSTATS) { -+ sinfo->filled |= BIT(NL80211_STA_INFO_TX_FAILED); -+ sinfo->tx_failed = le32_to_cpu(sta_info_le.tx_failures); -+ sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS); -+ sinfo->tx_packets = le32_to_cpu(sta_info_le.tx_pkts); -+ sinfo->tx_packets += le32_to_cpu(sta_info_le.tx_mcast_pkts); -+ sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS); -+ sinfo->rx_packets = le32_to_cpu(sta_info_le.rx_ucast_pkts); -+ sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts); -+ if (sinfo->tx_packets) { - sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE); -- sinfo->txrate.legacy = rate * 5; -- brcmf_dbg(CONN, "Rate %d Mbps\n", rate / 2); -+ sinfo->txrate.legacy = le32_to_cpu(sta_info_le.tx_rate); -+ sinfo->txrate.legacy /= 100; - } -- -- if (test_bit(BRCMF_VIF_STATUS_CONNECTED, -- &ifp->vif->sme_state)) { -- memset(&scb_val, 0, sizeof(scb_val)); -- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI, -- &scb_val, sizeof(scb_val)); -- if (err) { -- brcmf_err("Could not get rssi (%d)\n", err); -- goto done; -- } else { -- rssi = le32_to_cpu(scb_val.val); -- sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); -- sinfo->signal = rssi; -- brcmf_dbg(CONN, "RSSI %d dBm\n", rssi); -- } -- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_BCNPRD, -- &beacon_period); -- if (err) { -- brcmf_err("Could not get beacon period (%d)\n", -- err); -- goto done; -- } else { -- sinfo->bss_param.beacon_interval = -- beacon_period; -- brcmf_dbg(CONN, "Beacon peroid %d\n", -- beacon_period); -- } -- err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_DTIMPRD, -- &dtim_period); -- if (err) { -- brcmf_err("Could not get DTIM period (%d)\n", -- err); -- goto done; -- } else { -- sinfo->bss_param.dtim_period = dtim_period; -- brcmf_dbg(CONN, "DTIM peroid %d\n", -- dtim_period); -- } -- sinfo->filled |= BIT(NL80211_STA_INFO_BSS_PARAM); -+ if (sinfo->rx_packets) { -+ sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE); -+ sinfo->rxrate.legacy = le32_to_cpu(sta_info_le.rx_rate); -+ sinfo->rxrate.legacy /= 100; -+ } -+ if (le16_to_cpu(sta_info_le.ver) >= 4) { -+ sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES); -+ sinfo->tx_bytes = le64_to_cpu(sta_info_le.tx_tot_bytes); -+ sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES); -+ sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes); - } -- } else -- err = -EPERM; -+ } - done: - brcmf_dbg(TRACE, "Exit\n"); - return err; ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -@@ -32,7 +32,11 @@ - #define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */ - #define BRCMF_BSS_RSSI_ON_CHANNEL 0x0002 - --#define BRCMF_STA_ASSOC 0x10 /* Associated */ -+#define BRCMF_STA_WME 0x00000002 /* WMM association */ -+#define BRCMF_STA_AUTHE 0x00000008 /* Authenticated */ -+#define BRCMF_STA_ASSOC 0x00000010 /* Associated */ -+#define BRCMF_STA_AUTHO 0x00000020 /* Authorized */ -+#define BRCMF_STA_SCBSTATS 0x00004000 /* Per STA debug stats */ - - /* size of brcmf_scan_params not including variable length array */ - #define BRCMF_SCAN_PARAMS_FIXED_SIZE 64 -@@ -113,6 +117,7 @@ - #define BRCMF_WOWL_MAXPATTERNSIZE 128 - - #define BRCMF_COUNTRY_BUF_SZ 4 -+#define BRCMF_ANT_MAX 4 - - /* join preference types for join_pref iovar */ - enum brcmf_join_pref_types { -@@ -456,25 +461,61 @@ struct brcmf_channel_info_le { - }; - - struct brcmf_sta_info_le { -- __le16 ver; /* version of this struct */ -- __le16 len; /* length in bytes of this structure */ -- __le16 cap; /* sta's advertised capabilities */ -- __le32 flags; /* flags defined below */ -- __le32 idle; /* time since data pkt rx'd from sta */ -- u8 ea[ETH_ALEN]; /* Station address */ -- __le32 count; /* # rates in this set */ -- u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */ -+ __le16 ver; /* version of this struct */ -+ __le16 len; /* length in bytes of this structure */ -+ __le16 cap; /* sta's advertised capabilities */ -+ __le32 flags; /* flags defined below */ -+ __le32 idle; /* time since data pkt rx'd from sta */ -+ u8 ea[ETH_ALEN]; /* Station address */ -+ __le32 count; /* # rates in this set */ -+ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */ - /* w/hi bit set if basic */ -- __le32 in; /* seconds elapsed since associated */ -- __le32 listen_interval_inms; /* Min Listen interval in ms for STA */ -- __le32 tx_pkts; /* # of packets transmitted */ -- __le32 tx_failures; /* # of packets failed */ -- __le32 rx_ucast_pkts; /* # of unicast packets received */ -- __le32 rx_mcast_pkts; /* # of multicast packets received */ -- __le32 tx_rate; /* Rate of last successful tx frame */ -- __le32 rx_rate; /* Rate of last successful rx frame */ -- __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */ -- __le32 rx_decrypt_failures; /* # of packet decrypted failed */ -+ __le32 in; /* seconds elapsed since associated */ -+ __le32 listen_interval_inms; /* Min Listen interval in ms for STA */ -+ __le32 tx_pkts; /* # of packets transmitted */ -+ __le32 tx_failures; /* # of packets failed */ -+ __le32 rx_ucast_pkts; /* # of unicast packets received */ -+ __le32 rx_mcast_pkts; /* # of multicast packets received */ -+ __le32 tx_rate; /* Rate of last successful tx frame */ -+ __le32 rx_rate; /* Rate of last successful rx frame */ -+ __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */ -+ __le32 rx_decrypt_failures; /* # of packet decrypted failed */ -+ __le32 tx_tot_pkts; /* # of tx pkts (ucast + mcast) */ -+ __le32 rx_tot_pkts; /* # of data packets recvd (uni + mcast) */ -+ __le32 tx_mcast_pkts; /* # of mcast pkts txed */ -+ __le64 tx_tot_bytes; /* data bytes txed (ucast + mcast) */ -+ __le64 rx_tot_bytes; /* data bytes recvd (ucast + mcast) */ -+ __le64 tx_ucast_bytes; /* data bytes txed (ucast) */ -+ __le64 tx_mcast_bytes; /* # data bytes txed (mcast) */ -+ __le64 rx_ucast_bytes; /* data bytes recvd (ucast) */ -+ __le64 rx_mcast_bytes; /* data bytes recvd (mcast) */ -+ s8 rssi[BRCMF_ANT_MAX]; /* per antenna rssi */ -+ s8 nf[BRCMF_ANT_MAX]; /* per antenna noise floor */ -+ __le16 aid; /* association ID */ -+ __le16 ht_capabilities; /* advertised ht caps */ -+ __le16 vht_flags; /* converted vht flags */ -+ __le32 tx_pkts_retry_cnt; /* # of frames where a retry was -+ * exhausted. -+ */ -+ __le32 tx_pkts_retry_exhausted; /* # of user frames where a retry -+ * was exhausted -+ */ -+ s8 rx_lastpkt_rssi[BRCMF_ANT_MAX]; /* Per antenna RSSI of last -+ * received data frame. -+ */ -+ /* TX WLAN retry/failure statistics: -+ * Separated for host requested frames and locally generated frames. -+ * Include unicast frame only where the retries/failures can be counted. -+ */ -+ __le32 tx_pkts_total; /* # user frames sent successfully */ -+ __le32 tx_pkts_retries; /* # user frames retries */ -+ __le32 tx_pkts_fw_total; /* # FW generated sent successfully */ -+ __le32 tx_pkts_fw_retries; /* # retries for FW generated frames */ -+ __le32 tx_pkts_fw_retry_exhausted; /* # FW generated where a retry -+ * was exhausted -+ */ -+ __le32 rx_pkts_retried; /* # rx with retry bit set */ -+ __le32 tx_rate_fallback; /* lowest fallback TX rate */ - }; - - struct brcmf_chanspec_list { diff --git a/package/kernel/mac80211/patches/359-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch b/package/kernel/mac80211/patches/359-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch deleted file mode 100644 index 302bc3ed15..0000000000 --- a/package/kernel/mac80211/patches/359-0004-brcmfmac-have-sdio-return-EIO-when-device-communicat.patch +++ /dev/null @@ -1,56 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 11 Jun 2015 00:12:20 +0200 -Subject: [PATCH] brcmfmac: have sdio return -EIO when device communication - is not possible - -The bus interface functions txctl and rxctl may be used while the device -can not be accessed, eg. upon driver .remove() callback. This patch will -immediately return -EIO when this is the case which speeds up the module -unload. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c -@@ -988,6 +988,7 @@ static void brcmf_sdiod_freezer_detach(s - - static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev) - { -+ sdiodev->state = BRCMF_SDIOD_DOWN; - if (sdiodev->bus) { - brcmf_sdio_remove(sdiodev->bus); - sdiodev->bus = NULL; ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -2820,6 +2820,8 @@ static int brcmf_sdio_bus_txdata(struct - struct brcmf_sdio *bus = sdiodev->bus; - - brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len); -+ if (sdiodev->state != BRCMF_SDIOD_DATA) -+ return -EIO; - - /* Add space for the header */ - skb_push(pkt, bus->tx_hdrlen); -@@ -2948,6 +2950,8 @@ brcmf_sdio_bus_txctl(struct device *dev, - int ret; - - brcmf_dbg(TRACE, "Enter\n"); -+ if (sdiodev->state != BRCMF_SDIOD_DATA) -+ return -EIO; - - /* Send from dpc */ - bus->ctrl_frame_buf = msg; -@@ -3238,6 +3242,8 @@ brcmf_sdio_bus_rxctl(struct device *dev, - struct brcmf_sdio *bus = sdiodev->bus; - - brcmf_dbg(TRACE, "Enter\n"); -+ if (sdiodev->state != BRCMF_SDIOD_DATA) -+ return -EIO; - - /* Wait until control frame is available */ - timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending); diff --git a/package/kernel/mac80211/patches/359-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch b/package/kernel/mac80211/patches/359-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch deleted file mode 100644 index 34af6d2acf..0000000000 --- a/package/kernel/mac80211/patches/359-0005-ath9k-make-DMA-stop-related-messages-debug-only.patch +++ /dev/null @@ -1,74 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Thu, 2 Jul 2015 13:35:05 +0200 -Subject: [PATCH] ath9k: make DMA stop related messages debug-only - -A long time ago, ath9k had issues during reset where the DMA engine -would stay active and could potentially corrupt memory. -To debug those issues, the driver would print warnings whenever they -occur. - -Nowadays, these issues are gone and the primary cause of these messages -is if the MAC is stuck during reset or busy processing a long -transmission. This is fairly harmless, yet these messages continue to -worry users. - -To reduce the number of bogus bug reports, turn these messages into -debug messages and count their occurence in the "reset" debugfs file. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/debug.c -+++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -765,6 +765,8 @@ static int read_file_reset(struct seq_fi - [RESET_TYPE_BEACON_STUCK] = "Stuck Beacon", - [RESET_TYPE_MCI] = "MCI Reset", - [RESET_TYPE_CALIBRATION] = "Calibration error", -+ [RESET_TX_DMA_ERROR] = "Tx DMA stop error", -+ [RESET_RX_DMA_ERROR] = "Rx DMA stop error", - }; - int i; - ---- a/drivers/net/wireless/ath/ath9k/debug.h -+++ b/drivers/net/wireless/ath/ath9k/debug.h -@@ -50,6 +50,8 @@ enum ath_reset_type { - RESET_TYPE_BEACON_STUCK, - RESET_TYPE_MCI, - RESET_TYPE_CALIBRATION, -+ RESET_TX_DMA_ERROR, -+ RESET_RX_DMA_ERROR, - __RESET_TYPE_MAX - }; - ---- a/drivers/net/wireless/ath/ath9k/recv.c -+++ b/drivers/net/wireless/ath/ath9k/recv.c -@@ -496,10 +496,9 @@ bool ath_stoprecv(struct ath_softc *sc) - - if (!(ah->ah_flags & AH_UNPLUGGED) && - unlikely(!stopped)) { -- ath_err(ath9k_hw_common(sc->sc_ah), -- "Could not stop RX, we could be " -- "confusing the DMA engine when we start RX up\n"); -- ATH_DBG_WARN_ON_ONCE(!stopped); -+ ath_dbg(ath9k_hw_common(sc->sc_ah), RESET, -+ "Failed to stop Rx DMA\n"); -+ RESET_STAT_INC(sc, RESET_RX_DMA_ERROR); - } - return stopped && !reset; - } ---- a/drivers/net/wireless/ath/ath9k/xmit.c -+++ b/drivers/net/wireless/ath/ath9k/xmit.c -@@ -1896,8 +1896,11 @@ bool ath_drain_all_txq(struct ath_softc - npend |= BIT(i); - } - -- if (npend) -- ath_err(common, "Failed to stop TX DMA, queues=0x%03x!\n", npend); -+ if (npend) { -+ RESET_STAT_INC(sc, RESET_TX_DMA_ERROR); -+ ath_dbg(common, RESET, -+ "Failed to stop TX DMA, queues=0x%03x!\n", npend); -+ } - - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { - if (!ATH_TXQ_SETUP(sc, i)) diff --git a/package/kernel/mac80211/patches/359-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch b/package/kernel/mac80211/patches/359-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch deleted file mode 100644 index 06f2dce83f..0000000000 --- a/package/kernel/mac80211/patches/359-0006-brcmfmac-free-ifp-for-non-netdev-interface-in-p2p-mo.patch +++ /dev/null @@ -1,44 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 11 Jun 2015 00:12:21 +0200 -Subject: [PATCH] brcmfmac: free ifp for non-netdev interface in p2p module - -Making it more clear by freeing the ifp in same place where the -vif object is freed. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -867,8 +867,6 @@ static void brcmf_del_if(struct brcmf_pu - } - /* unregister will take care of freeing it */ - unregister_netdev(ifp->ndev); -- } else { -- kfree(ifp); - } - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2238,6 +2238,7 @@ static void brcmf_p2p_delete_p2pdev(stru - { - cfg80211_unregister_wdev(&vif->wdev); - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; -+ kfree(vif->ifp); - brcmf_free_vif(vif); - } - -@@ -2361,6 +2362,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiph - break; - - case NL80211_IFTYPE_P2P_DEVICE: -+ brcmf_p2p_cancel_remain_on_channel(vif->ifp); -+ brcmf_p2p_deinit_discovery(p2p); - brcmf_p2p_delete_p2pdev(p2p, vif); - return 0; - default: diff --git a/package/kernel/mac80211/patches/359-0007-brcmfmac-move-p2p-attach-detach-functions.patch b/package/kernel/mac80211/patches/359-0007-brcmfmac-move-p2p-attach-detach-functions.patch deleted file mode 100644 index 0a6e093512..0000000000 --- a/package/kernel/mac80211/patches/359-0007-brcmfmac-move-p2p-attach-detach-functions.patch +++ /dev/null @@ -1,225 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 11 Jun 2015 00:12:22 +0200 -Subject: [PATCH] brcmfmac: move p2p attach/detach functions - -Moving two functions in p2p.c as is so next change will be -easier to review. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -1908,105 +1908,6 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere - - - /** -- * brcmf_p2p_attach() - attach for P2P. -- * -- * @cfg: driver private data for cfg80211 interface. -- */ --s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) --{ -- struct brcmf_if *pri_ifp; -- struct brcmf_if *p2p_ifp; -- struct brcmf_cfg80211_vif *p2p_vif; -- struct brcmf_p2p_info *p2p; -- struct brcmf_pub *drvr; -- s32 bssidx; -- s32 err = 0; -- -- p2p = &cfg->p2p; -- p2p->cfg = cfg; -- -- drvr = cfg->pub; -- -- pri_ifp = drvr->iflist[0]; -- p2p_ifp = drvr->iflist[1]; -- -- p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; -- -- if (p2p_ifp) { -- p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE, -- false); -- if (IS_ERR(p2p_vif)) { -- brcmf_err("could not create discovery vif\n"); -- err = -ENOMEM; -- goto exit; -- } -- -- p2p_vif->ifp = p2p_ifp; -- p2p_ifp->vif = p2p_vif; -- p2p_vif->wdev.netdev = p2p_ifp->ndev; -- p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev; -- SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy)); -- -- p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif; -- -- brcmf_p2p_generate_bss_mac(p2p, NULL); -- memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN); -- brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); -- -- /* Initialize P2P Discovery in the firmware */ -- err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); -- if (err < 0) { -- brcmf_err("set p2p_disc error\n"); -- brcmf_free_vif(p2p_vif); -- goto exit; -- } -- /* obtain bsscfg index for P2P discovery */ -- err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); -- if (err < 0) { -- brcmf_err("retrieving discover bsscfg index failed\n"); -- brcmf_free_vif(p2p_vif); -- goto exit; -- } -- /* Verify that firmware uses same bssidx as driver !! */ -- if (p2p_ifp->bssidx != bssidx) { -- brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", -- bssidx, p2p_ifp->bssidx); -- brcmf_free_vif(p2p_vif); -- goto exit; -- } -- -- init_completion(&p2p->send_af_done); -- INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); -- init_completion(&p2p->afx_hdl.act_frm_scan); -- init_completion(&p2p->wait_next_af); -- } --exit: -- return err; --} -- -- --/** -- * brcmf_p2p_detach() - detach P2P. -- * -- * @p2p: P2P specific data. -- */ --void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) --{ -- struct brcmf_cfg80211_vif *vif; -- -- vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; -- if (vif != NULL) { -- brcmf_p2p_cancel_remain_on_channel(vif->ifp); -- brcmf_p2p_deinit_discovery(p2p); -- /* remove discovery interface */ -- brcmf_free_vif(vif); -- p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; -- } -- /* just set it all to zero */ -- memset(p2p, 0, sizeof(*p2p)); --} -- --/** - * brcmf_p2p_get_current_chanspec() - Get current operation channel. - * - * @p2p: P2P specific data. -@@ -2425,3 +2326,102 @@ void brcmf_p2p_stop_device(struct wiphy - clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state); - mutex_unlock(&cfg->usr_sync); - } -+ -+/** -+ * brcmf_p2p_attach() - attach for P2P. -+ * -+ * @cfg: driver private data for cfg80211 interface. -+ */ -+s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) -+{ -+ struct brcmf_if *pri_ifp; -+ struct brcmf_if *p2p_ifp; -+ struct brcmf_cfg80211_vif *p2p_vif; -+ struct brcmf_p2p_info *p2p; -+ struct brcmf_pub *drvr; -+ s32 bssidx; -+ s32 err = 0; -+ -+ p2p = &cfg->p2p; -+ p2p->cfg = cfg; -+ -+ drvr = cfg->pub; -+ -+ pri_ifp = drvr->iflist[0]; -+ p2p_ifp = drvr->iflist[1]; -+ -+ p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; -+ -+ if (p2p_ifp) { -+ p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE, -+ false); -+ if (IS_ERR(p2p_vif)) { -+ brcmf_err("could not create discovery vif\n"); -+ err = -ENOMEM; -+ goto exit; -+ } -+ -+ p2p_vif->ifp = p2p_ifp; -+ p2p_ifp->vif = p2p_vif; -+ p2p_vif->wdev.netdev = p2p_ifp->ndev; -+ p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev; -+ SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy)); -+ -+ p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif; -+ -+ brcmf_p2p_generate_bss_mac(p2p, NULL); -+ memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN); -+ brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); -+ -+ /* Initialize P2P Discovery in the firmware */ -+ err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); -+ if (err < 0) { -+ brcmf_err("set p2p_disc error\n"); -+ brcmf_free_vif(p2p_vif); -+ goto exit; -+ } -+ /* obtain bsscfg index for P2P discovery */ -+ err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); -+ if (err < 0) { -+ brcmf_err("retrieving discover bsscfg index failed\n"); -+ brcmf_free_vif(p2p_vif); -+ goto exit; -+ } -+ /* Verify that firmware uses same bssidx as driver !! */ -+ if (p2p_ifp->bssidx != bssidx) { -+ brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", -+ bssidx, p2p_ifp->bssidx); -+ brcmf_free_vif(p2p_vif); -+ goto exit; -+ } -+ -+ init_completion(&p2p->send_af_done); -+ INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); -+ init_completion(&p2p->afx_hdl.act_frm_scan); -+ init_completion(&p2p->wait_next_af); -+ } -+exit: -+ return err; -+} -+ -+/** -+ * brcmf_p2p_detach() - detach P2P. -+ * -+ * @p2p: P2P specific data. -+ */ -+void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) -+{ -+ struct brcmf_cfg80211_vif *vif; -+ -+ vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif; -+ if (vif != NULL) { -+ brcmf_p2p_cancel_remain_on_channel(vif->ifp); -+ brcmf_p2p_deinit_discovery(p2p); -+ /* remove discovery interface */ -+ brcmf_free_vif(vif); -+ p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; -+ } -+ /* just set it all to zero */ -+ memset(p2p, 0, sizeof(*p2p)); -+} -+ diff --git a/package/kernel/mac80211/patches/359-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch b/package/kernel/mac80211/patches/359-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch deleted file mode 100644 index 72e8eed61b..0000000000 --- a/package/kernel/mac80211/patches/359-0008-brcmfmac-assure-p2pdev-is-unregistered-upon-driver-u.patch +++ /dev/null @@ -1,63 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 11 Jun 2015 00:12:23 +0200 -Subject: [PATCH] brcmfmac: assure p2pdev is unregistered upon driver - unload - -When unloading the driver with a p2pdev interface it resulted in -a warning upon calling wiphy_unregister() and subsequently a crash -in the driver. This patch assures the p2pdev is unregistered calling -unregister_wdev() before doing the wiphy_unregister(). - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -6206,10 +6206,8 @@ void brcmf_cfg80211_detach(struct brcmf_ - if (!cfg) - return; - -- WARN_ON(!list_empty(&cfg->vif_list)); -- wiphy_unregister(cfg->wiphy); - brcmf_btcoex_detach(cfg); -- brcmf_p2p_detach(&cfg->p2p); -+ wiphy_unregister(cfg->wiphy); - wl_deinit_priv(cfg); - brcmf_free_wiphy(cfg->wiphy); - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -1098,6 +1098,7 @@ void brcmf_detach(struct device *dev) - - /* stop firmware event handling */ - brcmf_fweh_detach(drvr); -+ brcmf_p2p_detach(&drvr->config->p2p); - - brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN); - ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -16,6 +16,7 @@ - #include <linux/slab.h> - #include <linux/netdevice.h> - #include <linux/etherdevice.h> -+#include <linux/rtnetlink.h> - #include <net/cfg80211.h> - - #include <brcmu_wifi.h> -@@ -2418,8 +2419,9 @@ void brcmf_p2p_detach(struct brcmf_p2p_i - brcmf_p2p_cancel_remain_on_channel(vif->ifp); - brcmf_p2p_deinit_discovery(p2p); - /* remove discovery interface */ -- brcmf_free_vif(vif); -- p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; -+ rtnl_lock(); -+ brcmf_p2p_delete_p2pdev(p2p, vif); -+ rtnl_unlock(); - } - /* just set it all to zero */ - memset(p2p, 0, sizeof(*p2p)); diff --git a/package/kernel/mac80211/patches/360-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch b/package/kernel/mac80211/patches/360-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch deleted file mode 100644 index 179c77e9df..0000000000 --- a/package/kernel/mac80211/patches/360-0001-brcmfmac-fix-double-free-of-p2pdev-interface.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Mon, 15 Jun 2015 22:48:38 +0200 -Subject: [PATCH] brcmfmac: fix double free of p2pdev interface - -When freeing the driver ifp pointer it should also be removed from -the driver interface list, which is what brcmf_remove_interface() -does. Otherwise, the ifp pointer will be freed twice triggering -a kernel oops. - -Fixes: f37d69a4babc ("brcmfmac: free ifp for non-netdev interface in p2p module") -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2140,7 +2140,7 @@ static void brcmf_p2p_delete_p2pdev(stru - { - cfg80211_unregister_wdev(&vif->wdev); - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; -- kfree(vif->ifp); -+ brcmf_remove_interface(vif->ifp->drvr, vif->ifp->bssidx); - brcmf_free_vif(vif); - } - diff --git a/package/kernel/mac80211/patches/360-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch b/package/kernel/mac80211/patches/360-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch deleted file mode 100644 index e4f88b5022..0000000000 --- a/package/kernel/mac80211/patches/360-0002-brcmfmac-make-brcmf_p2p_detach-call-conditional.patch +++ /dev/null @@ -1,29 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Mon, 15 Jun 2015 22:48:39 +0200 -Subject: [PATCH] brcmfmac: make brcmf_p2p_detach() call conditional - -During verification of error handling in brcmf_cfg80211_attach() a -null pointer dereference occurred upon calling brcmf_p2p_detach() -from brcmf_detach(). This should only be called when the -brcmf_cfg80211_attach() has succeeded. - -Fixes: f7a40873d2fa ("brcmfmac: assure p2pdev is unregistered upon driver unload") -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -1098,7 +1098,8 @@ void brcmf_detach(struct device *dev) - - /* stop firmware event handling */ - brcmf_fweh_detach(drvr); -- brcmf_p2p_detach(&drvr->config->p2p); -+ if (drvr->config) -+ brcmf_p2p_detach(&drvr->config->p2p); - - brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN); - diff --git a/package/kernel/mac80211/patches/361-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch b/package/kernel/mac80211/patches/361-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch deleted file mode 100644 index 0a81237a28..0000000000 --- a/package/kernel/mac80211/patches/361-brcmfmac-set-wiphy-s-addresses-to-provide-valid-MACs.patch +++ /dev/null @@ -1,67 +0,0 @@ -From: Rafa? Mi?ecki <zajec5@gmail.com> -Date: Thu, 9 Jul 2015 17:07:08 +0200 -Subject: [PATCH] brcmfmac: set wiphy's addresses to provide valid MACs - -Broadcom's firmware requires every BSS to use MAC address with unique -last few bits. The amount of bits may depend on a particular firmware, -it was verified to be 2 for BCM43602 one. -If this condition won't be fulfilled firmware will reject such MAC: -brcmfmac: _brcmf_set_mac_address: Setting cur_etheraddr failed, -52 - -We don't want to simply set addr_mask as it would also disallow using -locally administrated bit. Instead let's build a list of addresses -manually enabling 0x2 bit for extra interfaces. - -Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -5784,6 +5784,7 @@ static void brcmf_wiphy_wowl_params(stru - - static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp) - { -+ struct brcmf_pub *drvr = ifp->drvr; - struct ieee80211_supported_band *band; - __le32 bandlist[3]; - u32 n_bands; -@@ -5797,6 +5798,19 @@ static int brcmf_setup_wiphy(struct wiph - if (err) - return err; - -+ for (i = 0; i < wiphy->iface_combinations->max_interfaces && -+ i < ARRAY_SIZE(drvr->addresses); i++) { -+ u8 *addr = drvr->addresses[i].addr; -+ -+ memcpy(addr, drvr->mac, ETH_ALEN); -+ if (i) { -+ addr[0] |= BIT(1); -+ addr[ETH_ALEN - 1] ^= i; -+ } -+ } -+ wiphy->addresses = drvr->addresses; -+ wiphy->n_addresses = i; -+ - wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; - wiphy->cipher_suites = __wl_cipher_suites; - wiphy->n_cipher_suites = ARRAY_SIZE(__wl_cipher_suites); ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -21,6 +21,7 @@ - #ifndef BRCMFMAC_CORE_H - #define BRCMFMAC_CORE_H - -+#include <net/cfg80211.h> - #include "fweh.h" - - #define TOE_TX_CSUM_OL 0x00000001 -@@ -118,6 +119,8 @@ struct brcmf_pub { - /* Multicast data packets sent to dongle */ - unsigned long tx_multicast; - -+ struct mac_address addresses[BRCMF_MAX_IFS]; -+ - struct brcmf_if *iflist[BRCMF_MAX_IFS]; - - struct mutex proto_block; diff --git a/package/kernel/mac80211/patches/362-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch b/package/kernel/mac80211/patches/362-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch deleted file mode 100644 index e44f121ea3..0000000000 --- a/package/kernel/mac80211/patches/362-brcmfmac-dhd_sdio.c-use-existing-atomic_or-primitive.patch +++ /dev/null @@ -1,45 +0,0 @@ -From: Vineet Gupta <Vineet.Gupta1@synopsys.com> -Date: Thu, 9 Jul 2015 13:43:18 +0530 -Subject: [PATCH] brcmfmac: dhd_sdio.c: use existing atomic_or primitive - -There's already a generic implementation so use that instead. - -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -2564,15 +2564,6 @@ static inline void brcmf_sdio_clrintr(st - } - } - --static void atomic_orr(int val, atomic_t *v) --{ -- int old_val; -- -- old_val = atomic_read(v); -- while (atomic_cmpxchg(v, old_val, val | old_val) != old_val) -- old_val = atomic_read(v); --} -- - static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) - { - struct brcmf_core *buscore; -@@ -2595,7 +2586,7 @@ static int brcmf_sdio_intr_rstatus(struc - if (val) { - brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret); - bus->sdcnt.f1regdata++; -- atomic_orr(val, &bus->intstatus); -+ atomic_or(val, &bus->intstatus); - } - - return ret; -@@ -2712,7 +2703,7 @@ static void brcmf_sdio_dpc(struct brcmf_ - - /* Keep still-pending events for next scheduling */ - if (intstatus) -- atomic_orr(intstatus, &bus->intstatus); -+ atomic_or(intstatus, &bus->intstatus); - - brcmf_sdio_clrintr(bus); - diff --git a/package/kernel/mac80211/patches/363-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch b/package/kernel/mac80211/patches/363-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch deleted file mode 100644 index 76ca143df5..0000000000 --- a/package/kernel/mac80211/patches/363-0001-brcmfmac-check-all-combinations-when-setting-wiphy-s.patch +++ /dev/null @@ -1,46 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 20 Aug 2015 00:16:42 +0200 -Subject: [PATCH] brcmfmac: check all combinations when setting wiphy's - addresses -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Broadcom is working on better reflection of interface combinations. With -upcoming patches we may have 1st combination supporting less interfaces -than others. -To don't run out of addresses check all combinations to find the one -with the greatest max_interfaces value. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -5785,7 +5785,9 @@ static void brcmf_wiphy_wowl_params(stru - static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp) - { - struct brcmf_pub *drvr = ifp->drvr; -+ const struct ieee80211_iface_combination *combo; - struct ieee80211_supported_band *band; -+ u16 max_interfaces = 0; - __le32 bandlist[3]; - u32 n_bands; - int err, i; -@@ -5798,8 +5800,13 @@ static int brcmf_setup_wiphy(struct wiph - if (err) - return err; - -- for (i = 0; i < wiphy->iface_combinations->max_interfaces && -- i < ARRAY_SIZE(drvr->addresses); i++) { -+ for (i = 0, combo = wiphy->iface_combinations; -+ i < wiphy->n_iface_combinations; i++, combo++) { -+ max_interfaces = max(max_interfaces, combo->max_interfaces); -+ } -+ -+ for (i = 0; i < max_interfaces && i < ARRAY_SIZE(drvr->addresses); -+ i++) { - u8 *addr = drvr->addresses[i].addr; - - memcpy(addr, drvr->mac, ETH_ALEN); diff --git a/package/kernel/mac80211/patches/363-0002-brcmfmac-correct-interface-combination-info.patch b/package/kernel/mac80211/patches/363-0002-brcmfmac-correct-interface-combination-info.patch deleted file mode 100644 index c4a0720b35..0000000000 --- a/package/kernel/mac80211/patches/363-0002-brcmfmac-correct-interface-combination-info.patch +++ /dev/null @@ -1,204 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 20 Aug 2015 22:06:03 +0200 -Subject: [PATCH] brcmfmac: correct interface combination info - -The interface combination provided by brcmfmac did not truly reflect -the combinations supported by driver and/or firmware. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Pontus Fuchs <pontusf@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -5694,63 +5694,132 @@ brcmf_txrx_stypes[NUM_NL80211_IFTYPES] = - } - }; - -+/** -+ * brcmf_setup_ifmodes() - determine interface modes and combinations. -+ * -+ * @wiphy: wiphy object. -+ * @ifp: interface object needed for feat module api. -+ * -+ * The interface modes and combinations are determined dynamically here -+ * based on firmware functionality. -+ * -+ * no p2p and no mbss: -+ * -+ * #STA <= 1, #AP <= 1, channels = 1, 2 total -+ * -+ * no p2p and mbss: -+ * -+ * #STA <= 1, #AP <= 1, channels = 1, 2 total -+ * #AP <= 4, matching BI, channels = 1, 4 total -+ * -+ * p2p, no mchan, and mbss: -+ * -+ * #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 1, 3 total -+ * #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total -+ * #AP <= 4, matching BI, channels = 1, 4 total -+ * -+ * p2p, mchan, and mbss: -+ * -+ * #STA <= 1, #P2P-DEV <= 1, #{P2P-CL, P2P-GO} <= 1, channels = 2, 3 total -+ * #STA <= 1, #P2P-DEV <= 1, #AP <= 1, #P2P-CL <= 1, channels = 1, 4 total -+ * #AP <= 4, matching BI, channels = 1, 4 total -+ */ - static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp) - { - struct ieee80211_iface_combination *combo = NULL; -- struct ieee80211_iface_limit *limits = NULL; -- int i = 0, max_iface_cnt; -+ struct ieee80211_iface_limit *c0_limits = NULL; -+ struct ieee80211_iface_limit *p2p_limits = NULL; -+ struct ieee80211_iface_limit *mbss_limits = NULL; -+ bool mbss, p2p; -+ int i, c, n_combos; - -- combo = kzalloc(sizeof(*combo), GFP_KERNEL); -+ mbss = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS); -+ p2p = brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P); -+ -+ n_combos = 1 + !!p2p + !!mbss; -+ combo = kcalloc(n_combos, sizeof(*combo), GFP_KERNEL); - if (!combo) - goto err; - -- limits = kzalloc(sizeof(*limits) * 4, GFP_KERNEL); -- if (!limits) -+ c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL); -+ if (!c0_limits) - goto err; - -+ if (p2p) { -+ p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL); -+ if (!p2p_limits) -+ goto err; -+ } -+ -+ if (mbss) { -+ mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL); -+ if (!mbss_limits) -+ goto err; -+ } -+ - wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_AP); - -- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN)) -- combo->num_different_channels = 2; -- else -- combo->num_different_channels = 1; -- -- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MBSS)) { -- limits[i].max = 1; -- limits[i++].types = BIT(NL80211_IFTYPE_STATION); -- limits[i].max = 4; -- limits[i++].types = BIT(NL80211_IFTYPE_AP); -- max_iface_cnt = 5; -- } else { -- limits[i].max = 2; -- limits[i++].types = BIT(NL80211_IFTYPE_STATION) | -- BIT(NL80211_IFTYPE_AP); -- max_iface_cnt = 2; -- } -- -- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_P2P)) { -+ c = 0; -+ i = 0; -+ combo[c].num_different_channels = 1; -+ c0_limits[i].max = 1; -+ c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION); -+ if (p2p) { -+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MCHAN)) -+ combo[c].num_different_channels = 2; - wiphy->interface_modes |= BIT(NL80211_IFTYPE_P2P_CLIENT) | - BIT(NL80211_IFTYPE_P2P_GO) | - BIT(NL80211_IFTYPE_P2P_DEVICE); -- limits[i].max = 1; -- limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) | -- BIT(NL80211_IFTYPE_P2P_GO); -- limits[i].max = 1; -- limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE); -- max_iface_cnt += 2; -- } -- combo->max_interfaces = max_iface_cnt; -- combo->limits = limits; -- combo->n_limits = i; -+ c0_limits[i].max = 1; -+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE); -+ c0_limits[i].max = 1; -+ c0_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT) | -+ BIT(NL80211_IFTYPE_P2P_GO); -+ } else { -+ c0_limits[i].max = 1; -+ c0_limits[i++].types = BIT(NL80211_IFTYPE_AP); -+ } -+ combo[c].max_interfaces = i; -+ combo[c].n_limits = i; -+ combo[c].limits = c0_limits; -+ -+ if (p2p) { -+ c++; -+ i = 0; -+ combo[c].num_different_channels = 1; -+ p2p_limits[i].max = 1; -+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION); -+ p2p_limits[i].max = 1; -+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_AP); -+ p2p_limits[i].max = 1; -+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT); -+ p2p_limits[i].max = 1; -+ p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE); -+ combo[c].max_interfaces = i; -+ combo[c].n_limits = i; -+ combo[c].limits = p2p_limits; -+ } - -+ if (mbss) { -+ c++; -+ combo[c].beacon_int_infra_match = true; -+ combo[c].num_different_channels = 1; -+ mbss_limits[0].max = 4; -+ mbss_limits[0].types = BIT(NL80211_IFTYPE_AP); -+ combo[c].max_interfaces = 4; -+ combo[c].n_limits = 1; -+ combo[c].limits = mbss_limits; -+ } -+ wiphy->n_iface_combinations = n_combos; - wiphy->iface_combinations = combo; -- wiphy->n_iface_combinations = 1; - return 0; - - err: -- kfree(limits); -+ kfree(c0_limits); -+ kfree(p2p_limits); -+ kfree(mbss_limits); - kfree(combo); - return -ENOMEM; - } -@@ -6079,11 +6148,15 @@ static void brcmf_cfg80211_reg_notifier( - - static void brcmf_free_wiphy(struct wiphy *wiphy) - { -+ int i; -+ - if (!wiphy) - return; - -- if (wiphy->iface_combinations) -- kfree(wiphy->iface_combinations->limits); -+ if (wiphy->iface_combinations) { -+ for (i = 0; i < wiphy->n_iface_combinations; i++) -+ kfree(wiphy->iface_combinations[i].limits); -+ } - kfree(wiphy->iface_combinations); - if (wiphy->bands[IEEE80211_BAND_2GHZ]) { - kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels); diff --git a/package/kernel/mac80211/patches/363-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch b/package/kernel/mac80211/patches/363-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch deleted file mode 100644 index 9768ef2771..0000000000 --- a/package/kernel/mac80211/patches/363-0003-brcmfmac-add-debugfs-entry-for-msgbuf-statistics.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Franky Lin <frankyl@broadcom.com> -Date: Thu, 20 Aug 2015 22:06:04 +0200 -Subject: [PATCH] brcmfmac: add debugfs entry for msgbuf statistics - -Expose ring buffer read/write pointers and other useful statistics -through debugfs. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Franky Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -1360,6 +1360,60 @@ void brcmf_msgbuf_delete_flowring(struct - } - } - -+#ifdef DEBUG -+static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data) -+{ -+ struct brcmf_bus *bus_if = dev_get_drvdata(seq->private); -+ struct brcmf_pub *drvr = bus_if->drvr; -+ struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd; -+ struct brcmf_commonring *commonring; -+ u16 i; -+ struct brcmf_flowring_ring *ring; -+ struct brcmf_flowring_hash *hash; -+ -+ commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_CONTROL_SUBMIT]; -+ seq_printf(seq, "h2d_ctl_submit: rp %4u, wp %4u, depth %4u\n", -+ commonring->r_ptr, commonring->w_ptr, commonring->depth); -+ commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_RXPOST_SUBMIT]; -+ seq_printf(seq, "h2d_rx_submit: rp %4u, wp %4u, depth %4u\n", -+ commonring->r_ptr, commonring->w_ptr, commonring->depth); -+ commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_CONTROL_COMPLETE]; -+ seq_printf(seq, "d2h_ctl_cmplt: rp %4u, wp %4u, depth %4u\n", -+ commonring->r_ptr, commonring->w_ptr, commonring->depth); -+ commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_TX_COMPLETE]; -+ seq_printf(seq, "d2h_tx_cmplt: rp %4u, wp %4u, depth %4u\n", -+ commonring->r_ptr, commonring->w_ptr, commonring->depth); -+ commonring = msgbuf->commonrings[BRCMF_D2H_MSGRING_RX_COMPLETE]; -+ seq_printf(seq, "d2h_rx_cmplt: rp %4u, wp %4u, depth %4u\n", -+ commonring->r_ptr, commonring->w_ptr, commonring->depth); -+ -+ seq_printf(seq, "\nh2d_flowrings: depth %u\n", -+ BRCMF_H2D_TXFLOWRING_MAX_ITEM); -+ seq_puts(seq, "Active flowrings:\n"); -+ hash = msgbuf->flow->hash; -+ for (i = 0; i < msgbuf->flow->nrofrings; i++) { -+ if (!msgbuf->flow->rings[i]) -+ continue; -+ ring = msgbuf->flow->rings[i]; -+ if (ring->status != RING_OPEN) -+ continue; -+ commonring = msgbuf->flowrings[i]; -+ hash = &msgbuf->flow->hash[ring->hash_id]; -+ seq_printf(seq, "id %3u: rp %4u, wp %4u, qlen %4u, blocked %u\n" -+ " ifidx %u, fifo %u, da %pM\n", -+ i, commonring->r_ptr, commonring->w_ptr, -+ skb_queue_len(&ring->skblist), ring->blocked, -+ hash->ifidx, hash->fifo, hash->mac); -+ } -+ -+ return 0; -+} -+#else -+static int brcmf_msgbuf_stats_read(struct seq_file *seq, void *data) -+{ -+ return 0; -+} -+#endif - - int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr) - { -@@ -1460,6 +1514,8 @@ int brcmf_proto_msgbuf_attach(struct brc - spin_lock_init(&msgbuf->flowring_work_lock); - INIT_LIST_HEAD(&msgbuf->work_queue); - -+ brcmf_debugfs_add_entry(drvr, "msgbuf_stats", brcmf_msgbuf_stats_read); -+ - return 0; - - fail: diff --git a/package/kernel/mac80211/patches/363-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch b/package/kernel/mac80211/patches/363-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch deleted file mode 100644 index 2b84cf9fcd..0000000000 --- a/package/kernel/mac80211/patches/363-0004-brcmfmac-make-use-of-cfg80211_check_combinations.patch +++ /dev/null @@ -1,83 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 20 Aug 2015 22:06:05 +0200 -Subject: [PATCH] brcmfmac: make use of cfg80211_check_combinations() - -Use cfg80211_check_combinations() so we can bail out early when an -interface add or change results in an invalid combination. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -469,6 +469,36 @@ brcmf_find_wpsie(const u8 *parse, u32 le - return NULL; - } - -+static int brcmf_vif_change_validate(struct brcmf_cfg80211_info *cfg, -+ struct brcmf_cfg80211_vif *vif, -+ enum nl80211_iftype new_type) -+{ -+ int iftype_num[NUM_NL80211_IFTYPES]; -+ struct brcmf_cfg80211_vif *pos; -+ -+ memset(&iftype_num[0], 0, sizeof(iftype_num)); -+ list_for_each_entry(pos, &cfg->vif_list, list) -+ if (pos == vif) -+ iftype_num[new_type]++; -+ else -+ iftype_num[pos->wdev.iftype]++; -+ -+ return cfg80211_check_combinations(cfg->wiphy, 1, 0, iftype_num); -+} -+ -+static int brcmf_vif_add_validate(struct brcmf_cfg80211_info *cfg, -+ enum nl80211_iftype new_type) -+{ -+ int iftype_num[NUM_NL80211_IFTYPES]; -+ struct brcmf_cfg80211_vif *pos; -+ -+ memset(&iftype_num[0], 0, sizeof(iftype_num)); -+ list_for_each_entry(pos, &cfg->vif_list, list) -+ iftype_num[pos->wdev.iftype]++; -+ -+ iftype_num[new_type]++; -+ return cfg80211_check_combinations(cfg->wiphy, 1, 0, iftype_num); -+} - - static void convert_key_from_CPU(struct brcmf_wsec_key *key, - struct brcmf_wsec_key_le *key_le) -@@ -662,8 +692,14 @@ static struct wireless_dev *brcmf_cfg802 - struct vif_params *params) - { - struct wireless_dev *wdev; -+ int err; - - brcmf_dbg(TRACE, "enter: %s type %d\n", name, type); -+ err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type); -+ if (err) { -+ brcmf_err("iface validation failed: err=%d\n", err); -+ return ERR_PTR(err); -+ } - switch (type) { - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_STATION: -@@ -822,8 +858,12 @@ brcmf_cfg80211_change_iface(struct wiphy - s32 ap = 0; - s32 err = 0; - -- brcmf_dbg(TRACE, "Enter, ndev=%p, type=%d\n", ndev, type); -- -+ brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type); -+ err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type); -+ if (err) { -+ brcmf_err("iface validation failed: err=%d\n", err); -+ return err; -+ } - switch (type) { - case NL80211_IFTYPE_MONITOR: - case NL80211_IFTYPE_WDS: diff --git a/package/kernel/mac80211/patches/363-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch b/package/kernel/mac80211/patches/363-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch deleted file mode 100644 index 2d5f7b9be7..0000000000 --- a/package/kernel/mac80211/patches/363-0005-brcmfmac-block-the-correct-flowring-when-backup-queu.patch +++ /dev/null @@ -1,48 +0,0 @@ -From: Franky Lin <frankyl@broadcom.com> -Date: Thu, 20 Aug 2015 22:06:06 +0200 -Subject: [PATCH] brcmfmac: block the correct flowring when backup queue - overflow - -brcmf_flowring_block blocks the last active flowring under the same -interface instead of the one provided by caller. This could lead to a -dead lock of netif stop if there are more than one flowring under the -interface and the traffic is high enough so brcmf_flowring_enqueue can -not unblock the ring right away. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Franky Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c -@@ -194,11 +194,15 @@ static void brcmf_flowring_block(struct - spin_lock_irqsave(&flow->block_lock, flags); - - ring = flow->rings[flowid]; -+ if (ring->blocked == blocked) { -+ spin_unlock_irqrestore(&flow->block_lock, flags); -+ return; -+ } - ifidx = brcmf_flowring_ifidx_get(flow, flowid); - - currently_blocked = false; - for (i = 0; i < flow->nrofrings; i++) { -- if (flow->rings[i]) { -+ if ((flow->rings[i]) && (i != flowid)) { - ring = flow->rings[i]; - if ((ring->status == RING_OPEN) && - (brcmf_flowring_ifidx_get(flow, i) == ifidx)) { -@@ -209,8 +213,8 @@ static void brcmf_flowring_block(struct - } - } - } -- ring->blocked = blocked; -- if (currently_blocked == blocked) { -+ flow->rings[flowid]->blocked = blocked; -+ if (currently_blocked) { - spin_unlock_irqrestore(&flow->block_lock, flags); - return; - } diff --git a/package/kernel/mac80211/patches/363-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch b/package/kernel/mac80211/patches/363-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch deleted file mode 100644 index 7378401c52..0000000000 --- a/package/kernel/mac80211/patches/363-0006-brcmfmac-bump-highest-event-number-for-4339-firmware.patch +++ /dev/null @@ -1,52 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 20 Aug 2015 22:06:07 +0200 -Subject: [PATCH] brcmfmac: bump highest event number for 4339 firmware - -The event mask length is determined by the highest event number -that is specified in the driver. When this length is shorter than -firmware expects setting event mask will fail and device becomes -pretty useless. This issue was reported with bcm4339 firmware that -was recently released. - -Reported-by: Pontus Fuchs <pontusf@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Pontus Fuchs <pontusf@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h -@@ -85,7 +85,6 @@ struct brcmf_event; - BRCMF_ENUM_DEF(IF, 54) \ - BRCMF_ENUM_DEF(P2P_DISC_LISTEN_COMPLETE, 55) \ - BRCMF_ENUM_DEF(RSSI, 56) \ -- BRCMF_ENUM_DEF(PFN_SCAN_COMPLETE, 57) \ - BRCMF_ENUM_DEF(EXTLOG_MSG, 58) \ - BRCMF_ENUM_DEF(ACTION_FRAME, 59) \ - BRCMF_ENUM_DEF(ACTION_FRAME_COMPLETE, 60) \ -@@ -103,8 +102,7 @@ struct brcmf_event; - BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) \ - BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75) \ - BRCMF_ENUM_DEF(TDLS_PEER_EVENT, 92) \ -- BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127) \ -- BRCMF_ENUM_DEF(PSTA_PRIMARY_INTF_IND, 128) -+ BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127) - - #define BRCMF_ENUM_DEF(id, val) \ - BRCMF_E_##id = (val), -@@ -112,7 +110,11 @@ struct brcmf_event; - /* firmware event codes sent by the dongle */ - enum brcmf_fweh_event_code { - BRCMF_FWEH_EVENT_ENUM_DEFLIST -- BRCMF_E_LAST -+ /* this determines event mask length which must match -+ * minimum length check in device firmware so it is -+ * hard-coded here. -+ */ -+ BRCMF_E_LAST = 139 - }; - #undef BRCMF_ENUM_DEF - diff --git a/package/kernel/mac80211/patches/365-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch b/package/kernel/mac80211/patches/365-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch deleted file mode 100644 index 97444b3c0d..0000000000 --- a/package/kernel/mac80211/patches/365-0001-brcmfmac-consolidate-ifp-lookup-in-driver-core.patch +++ /dev/null @@ -1,138 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:14:53 +0200 -Subject: [PATCH] brcmfmac: consolidate ifp lookup in driver core - -In rx path the firmware provide an interface index which is used to -map to a struct brcmf_if instance. However, this involves some trick -that is done in two places. This is changed by having driver core -providing brcmf_get_ifp() function. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c -@@ -276,6 +276,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu - struct sk_buff *pktbuf) - { - struct brcmf_proto_bcdc_header *h; -+ struct brcmf_if *ifp; - - brcmf_dbg(BCDC, "Enter\n"); - -@@ -289,30 +290,21 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu - trace_brcmf_bcdchdr(pktbuf->data); - h = (struct brcmf_proto_bcdc_header *)(pktbuf->data); - -- *ifidx = BCDC_GET_IF_IDX(h); -- if (*ifidx >= BRCMF_MAX_IFS) { -- brcmf_err("rx data ifnum out of range (%d)\n", *ifidx); -+ ifp = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h)); -+ if (IS_ERR_OR_NULL(ifp)) { -+ brcmf_dbg(INFO, "no matching ifp found\n"); - return -EBADE; - } -- /* The ifidx is the idx to map to matching netdev/ifp. When receiving -- * events this is easy because it contains the bssidx which maps -- * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd. -- * bssidx 1 is used for p2p0 and no data can be received or -- * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0 -- */ -- if (*ifidx) -- (*ifidx)++; -- - if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) != - BCDC_PROTO_VER) { - brcmf_err("%s: non-BCDC packet received, flags 0x%x\n", -- brcmf_ifname(drvr, *ifidx), h->flags); -+ brcmf_ifname(drvr, ifp->ifidx), h->flags); - return -EBADE; - } - - if (h->flags & BCDC_FLAG_SUM_GOOD) { - brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n", -- brcmf_ifname(drvr, *ifidx), h->flags); -+ brcmf_ifname(drvr, ifp->ifidx), h->flags); - pktbuf->ip_summed = CHECKSUM_UNNECESSARY; - } - -@@ -320,12 +312,15 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu - - skb_pull(pktbuf, BCDC_HEADER_LEN); - if (do_fws) -- brcmf_fws_hdrpull(drvr, *ifidx, h->data_offset << 2, pktbuf); -+ brcmf_fws_hdrpull(drvr, ifp->ifidx, h->data_offset << 2, -+ pktbuf); - else - skb_pull(pktbuf, h->data_offset << 2); - - if (pktbuf->len == 0) - return -ENODATA; -+ -+ *ifidx = ifp->ifidx; - return 0; - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -83,6 +83,25 @@ char *brcmf_ifname(struct brcmf_pub *drv - return "<if_none>"; - } - -+struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx) -+{ -+ if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) { -+ brcmf_err("ifidx %d out of range\n", ifidx); -+ return ERR_PTR(-ERANGE); -+ } -+ -+ /* The ifidx is the idx to map to matching netdev/ifp. When receiving -+ * events this is easy because it contains the bssidx which maps -+ * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd. -+ * bssidx 1 is used for p2p0 and no data can be received or -+ * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0 -+ */ -+ if (ifidx) -+ ifidx++; -+ -+ return drvr->iflist[ifidx]; -+} -+ - static void _brcmf_set_multicast_list(struct work_struct *work) - { - struct brcmf_if *ifp; ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -202,7 +202,7 @@ int brcmf_netdev_wait_pend8021x(struct b - - /* Return pointer to interface name */ - char *brcmf_ifname(struct brcmf_pub *drvr, int idx); -- -+struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx); - int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); - struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, - char *name, u8 *mac_addr); ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -1081,16 +1081,8 @@ brcmf_msgbuf_rx_skb(struct brcmf_msgbuf - { - struct brcmf_if *ifp; - -- /* The ifidx is the idx to map to matching netdev/ifp. When receiving -- * events this is easy because it contains the bssidx which maps -- * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd. -- * bssidx 1 is used for p2p0 and no data can be received or -- * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0 -- */ -- if (ifidx) -- (ifidx)++; -- ifp = msgbuf->drvr->iflist[ifidx]; -- if (!ifp || !ifp->ndev) { -+ ifp = brcmf_get_ifp(msgbuf->drvr, ifidx); -+ if (IS_ERR_OR_NULL(ifp) || !ifp->ndev) { - brcmf_err("Received pkt for invalid ifidx %d\n", ifidx); - brcmu_pkt_buf_free_skb(skb); - return; diff --git a/package/kernel/mac80211/patches/365-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch b/package/kernel/mac80211/patches/365-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch deleted file mode 100644 index 632714ce24..0000000000 --- a/package/kernel/mac80211/patches/365-0002-brcmfmac-make-brcmf_proto_hdrpull-return-struct-brcm.patch +++ /dev/null @@ -1,222 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:14:54 +0200 -Subject: [PATCH] brcmfmac: make brcmf_proto_hdrpull() return struct - brcmf_if instance - -Avoid spreading the ifidx in the driver, but have it return the -struct brcmf_if instance. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c -@@ -272,11 +272,11 @@ brcmf_proto_bcdc_hdrpush(struct brcmf_pu - } - - static int --brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx, -- struct sk_buff *pktbuf) -+brcmf_proto_bcdc_hdrpull(struct brcmf_pub *drvr, bool do_fws, -+ struct sk_buff *pktbuf, struct brcmf_if **ifp) - { - struct brcmf_proto_bcdc_header *h; -- struct brcmf_if *ifp; -+ struct brcmf_if *tmp_if; - - brcmf_dbg(BCDC, "Enter\n"); - -@@ -290,21 +290,21 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu - trace_brcmf_bcdchdr(pktbuf->data); - h = (struct brcmf_proto_bcdc_header *)(pktbuf->data); - -- ifp = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h)); -- if (IS_ERR_OR_NULL(ifp)) { -+ tmp_if = brcmf_get_ifp(drvr, BCDC_GET_IF_IDX(h)); -+ if (!tmp_if) { - brcmf_dbg(INFO, "no matching ifp found\n"); - return -EBADE; - } - if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) != - BCDC_PROTO_VER) { - brcmf_err("%s: non-BCDC packet received, flags 0x%x\n", -- brcmf_ifname(drvr, ifp->ifidx), h->flags); -+ brcmf_ifname(drvr, tmp_if->ifidx), h->flags); - return -EBADE; - } - - if (h->flags & BCDC_FLAG_SUM_GOOD) { - brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n", -- brcmf_ifname(drvr, ifp->ifidx), h->flags); -+ brcmf_ifname(drvr, tmp_if->ifidx), h->flags); - pktbuf->ip_summed = CHECKSUM_UNNECESSARY; - } - -@@ -312,7 +312,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu - - skb_pull(pktbuf, BCDC_HEADER_LEN); - if (do_fws) -- brcmf_fws_hdrpull(drvr, ifp->ifidx, h->data_offset << 2, -+ brcmf_fws_hdrpull(drvr, tmp_if->ifidx, h->data_offset << 2, - pktbuf); - else - skb_pull(pktbuf, h->data_offset << 2); -@@ -320,7 +320,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu - if (pktbuf->len == 0) - return -ENODATA; - -- *ifidx = ifp->ifidx; -+ *ifp = tmp_if; - return 0; - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -87,7 +87,7 @@ struct brcmf_if *brcmf_get_ifp(struct br - { - if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) { - brcmf_err("ifidx %d out of range\n", ifidx); -- return ERR_PTR(-ERANGE); -+ return NULL; - } - - /* The ifidx is the idx to map to matching netdev/ifp. When receiving -@@ -539,17 +539,15 @@ void brcmf_rx_frame(struct device *dev, - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_pub *drvr = bus_if->drvr; - struct brcmf_skb_reorder_data *rd; -- u8 ifidx; - int ret; - - brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb); - - /* process and remove protocol-specific header */ -- ret = brcmf_proto_hdrpull(drvr, true, &ifidx, skb); -- ifp = drvr->iflist[ifidx]; -+ ret = brcmf_proto_hdrpull(drvr, true, skb, &ifp); - - if (ret || !ifp || !ifp->ndev) { -- if ((ret != -ENODATA) && ifp) -+ if (ret != -ENODATA && ifp) - ifp->stats.rx_errors++; - brcmu_pkt_buf_free_skb(skb); - return; -@@ -592,17 +590,17 @@ void brcmf_txcomplete(struct device *dev - { - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_pub *drvr = bus_if->drvr; -- u8 ifidx; -+ struct brcmf_if *ifp; - - /* await txstatus signal for firmware if active */ - if (brcmf_fws_fc_active(drvr->fws)) { - if (!success) - brcmf_fws_bustxfail(drvr->fws, txp); - } else { -- if (brcmf_proto_hdrpull(drvr, false, &ifidx, txp)) -+ if (brcmf_proto_hdrpull(drvr, false, txp, &ifp)) - brcmu_pkt_buf_free_skb(txp); - else -- brcmf_txfinalize(drvr, txp, ifidx, success); -+ brcmf_txfinalize(drvr, txp, ifp->ifidx, success); - } - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -@@ -1448,7 +1448,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i - struct sk_buff *skb; - struct brcmf_skbuff_cb *skcb; - struct brcmf_fws_mac_descriptor *entry = NULL; -- u8 ifidx; -+ struct brcmf_if *ifp; - - brcmf_dbg(DATA, "flags %d\n", flags); - -@@ -1497,15 +1497,16 @@ brcmf_fws_txs_process(struct brcmf_fws_i - } - brcmf_fws_macdesc_return_req_credit(skb); - -- if (brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb)) { -+ ret = brcmf_proto_hdrpull(fws->drvr, false, skb, &ifp); -+ if (ret) { - brcmu_pkt_buf_free_skb(skb); - return -EINVAL; - } - if (!remove_from_hanger) -- ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifidx, -+ ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx, - genbit, seq); - if (remove_from_hanger || ret) -- brcmf_txfinalize(fws->drvr, skb, ifidx, true); -+ brcmf_txfinalize(fws->drvr, skb, ifp->ifidx, true); - - return 0; - } -@@ -1848,7 +1849,7 @@ static int brcmf_fws_commit_skb(struct b - entry->transit_count--; - if (entry->suppressed) - entry->suppr_transit_count--; -- brcmf_proto_hdrpull(fws->drvr, false, &ifidx, skb); -+ (void)brcmf_proto_hdrpull(fws->drvr, false, skb, NULL); - goto rollback; - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -522,7 +522,7 @@ static int brcmf_msgbuf_set_dcmd(struct - - - static int brcmf_msgbuf_hdrpull(struct brcmf_pub *drvr, bool do_fws, -- u8 *ifidx, struct sk_buff *skb) -+ struct sk_buff *skb, struct brcmf_if **ifp) - { - return -ENODEV; - } -@@ -1082,7 +1082,7 @@ brcmf_msgbuf_rx_skb(struct brcmf_msgbuf - struct brcmf_if *ifp; - - ifp = brcmf_get_ifp(msgbuf->drvr, ifidx); -- if (IS_ERR_OR_NULL(ifp) || !ifp->ndev) { -+ if (!ifp || !ifp->ndev) { - brcmf_err("Received pkt for invalid ifidx %d\n", ifidx); - brcmu_pkt_buf_free_skb(skb); - return; ---- a/drivers/net/wireless/brcm80211/brcmfmac/proto.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/proto.h -@@ -24,8 +24,8 @@ enum proto_addr_mode { - - - struct brcmf_proto { -- int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx, -- struct sk_buff *skb); -+ int (*hdrpull)(struct brcmf_pub *drvr, bool do_fws, -+ struct sk_buff *skb, struct brcmf_if **ifp); - int (*query_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, - void *buf, uint len); - int (*set_dcmd)(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, -@@ -46,9 +46,19 @@ int brcmf_proto_attach(struct brcmf_pub - void brcmf_proto_detach(struct brcmf_pub *drvr); - - static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, -- u8 *ifidx, struct sk_buff *skb) -+ struct sk_buff *skb, -+ struct brcmf_if **ifp) - { -- return drvr->proto->hdrpull(drvr, do_fws, ifidx, skb); -+ struct brcmf_if *tmp = NULL; -+ -+ /* assure protocol is always called with -+ * non-null initialized pointer. -+ */ -+ if (ifp) -+ *ifp = NULL; -+ else -+ ifp = &tmp; -+ return drvr->proto->hdrpull(drvr, do_fws, skb, ifp); - } - static inline int brcmf_proto_query_dcmd(struct brcmf_pub *drvr, int ifidx, - uint cmd, void *buf, uint len) diff --git a/package/kernel/mac80211/patches/365-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch b/package/kernel/mac80211/patches/365-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch deleted file mode 100644 index 2d15a77154..0000000000 --- a/package/kernel/mac80211/patches/365-0003-brcmfmac-change-parameters-for-brcmf_remove_interfac.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:14:55 +0200 -Subject: [PATCH] brcmfmac: change parameters for - brcmf_remove_interface() - -Just pass the interface to be removed, ie. the struct brcmf_if instance. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -4982,7 +4982,7 @@ brcmf_notify_connect_status_ap(struct br - brcmf_dbg(CONN, "AP mode link down\n"); - complete(&cfg->vif_disabled); - if (ifp->vif->mbss) -- brcmf_remove_interface(ifp->drvr, ifp->bssidx); -+ brcmf_remove_interface(ifp); - return 0; - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -887,12 +887,13 @@ static void brcmf_del_if(struct brcmf_pu - } - } - --void brcmf_remove_interface(struct brcmf_pub *drvr, u32 bssidx) -+void brcmf_remove_interface(struct brcmf_if *ifp) - { -- if (drvr->iflist[bssidx]) { -- brcmf_fws_del_interface(drvr->iflist[bssidx]); -- brcmf_del_if(drvr, bssidx); -- } -+ if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bssidx] != ifp)) -+ return; -+ -+ brcmf_fws_del_interface(ifp); -+ brcmf_del_if(ifp->drvr, ifp->bssidx); - } - - int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr) -@@ -1122,7 +1123,7 @@ void brcmf_detach(struct device *dev) - - /* make sure primary interface removed last */ - for (i = BRCMF_MAX_IFS-1; i > -1; i--) -- brcmf_remove_interface(drvr, i); -+ brcmf_remove_interface(drvr->iflist[i]); - - brcmf_cfg80211_detach(drvr->config); - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -206,7 +206,7 @@ struct brcmf_if *brcmf_get_ifp(struct br - int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); - struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, - char *name, u8 *mac_addr); --void brcmf_remove_interface(struct brcmf_pub *drvr, u32 bssidx); -+void brcmf_remove_interface(struct brcmf_if *ifp); - int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr); - void brcmf_txflowblock_if(struct brcmf_if *ifp, - enum brcmf_netif_stop_reason reason, bool state); ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -@@ -222,7 +222,7 @@ static void brcmf_fweh_handle_if_event(s - err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data); - - if (ifp && ifevent->action == BRCMF_E_IF_DEL) -- brcmf_remove_interface(drvr, ifevent->bssidx); -+ brcmf_remove_interface(ifp); - } - - /** ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2140,7 +2140,7 @@ static void brcmf_p2p_delete_p2pdev(stru - { - cfg80211_unregister_wdev(&vif->wdev); - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; -- brcmf_remove_interface(vif->ifp->drvr, vif->ifp->bssidx); -+ brcmf_remove_interface(vif->ifp); - brcmf_free_vif(vif); - } - diff --git a/package/kernel/mac80211/patches/365-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch b/package/kernel/mac80211/patches/365-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch deleted file mode 100644 index 2b61f4eda5..0000000000 --- a/package/kernel/mac80211/patches/365-0004-brcmfmac-only-call-brcmf_cfg80211_detach-when-attach.patch +++ /dev/null @@ -1,92 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:14:56 +0200 -Subject: [PATCH] brcmfmac: only call brcmf_cfg80211_detach() when attach - was successful - -In brcmf_bus_start() the function brcmf_cfg80211_attach() is called which -may fail. If this happens we should not call brcmf_cfg80211_detach() in -the failure path as it will result in NULL pointer dereference: - - brcmf_fweh_activate_events: Set event_msgs error (-5) - brcmf_bus_start: failed: -5 - brcmf_sdio_firmware_callback: dongle is not responding - BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 - IP: [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0 - PGD 0 - Oops: 0000 [#1] SMP - Modules linked in: brcmfmac(O) brcmutil(O) cfg80211 auth_rpcgss - CPU: 1 PID: 45 Comm: kworker/1:1 Tainted: G O - Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011 - Workqueue: events request_firmware_work_func - task: ffff880036c09ac0 ti: ffff880036dd4000 task.ti: ffff880036dd4000 - RIP: 0010:[<ffffffff811e8f08>] [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0 - RSP: 0018:ffff880036dd7a28 EFLAGS: 00010246 - RAX: ffff880036c09ac0 RBX: 0000000000000000 RCX: 000000007fffffff - RDX: 0000000000000000 RSI: ffffffff816578b9 RDI: 0000000000000000 - RBP: ffff880036dd7a48 R08: 0000000000000000 R09: ffff880036c0b340 - R10: 00000000000002ec R11: ffff880036dd7b08 R12: ffffffff816578b9 - R13: 0000000000000000 R14: ffffffff816578b9 R15: ffff8800c6c87000 - FS: 0000000000000000(0000) GS:ffff88012bc40000(0000) knlGS:0000000000000000 - CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b - CR2: 0000000000000068 CR3: 0000000001a0b000 CR4: 00000000000006e0 - Stack: - 0000000000000000 ffffffff816578b9 0000000000000000 ffff8800c0d003c8 - ffff880036dd7a78 ffffffff811e8ff5 0000000ffffffff1 ffffffff81a9b060 - ffff8800c789f880 ffff8800c0d00000 ffff880036dd7a98 ffffffff811ebe0d - Call Trace: - [<ffffffff811e8ff5>] kernfs_find_and_get_ns+0x35/0x60 - [<ffffffff811ebe0d>] sysfs_unmerge_group+0x1d/0x60 - [<ffffffff81404ef2>] dpm_sysfs_remove+0x22/0x60 - [<ffffffff813f9db9>] device_del+0x49/0x240 - [<ffffffff815da768>] rfkill_unregister+0x58/0xc0 - [<ffffffffa06bd91b>] wiphy_unregister+0xab/0x2f0 [cfg80211] - [<ffffffffa0742fe3>] brcmf_cfg80211_detach+0x23/0x50 [brcmfmac] - [<ffffffffa074d986>] brcmf_detach+0x86/0xe0 [brcmfmac] - [<ffffffffa0757de8>] brcmf_sdio_remove+0x48/0x120 [brcmfmac] - [<ffffffffa0758ed9>] brcmf_sdiod_remove+0x29/0xd0 [brcmfmac] - [<ffffffffa0759031>] brcmf_ops_sdio_remove+0xb1/0x110 [brcmfmac] - [<ffffffffa001c267>] sdio_bus_remove+0x37/0x100 [mmc_core] - [<ffffffff813fe026>] __device_release_driver+0x96/0x130 - [<ffffffff813fe0e3>] device_release_driver+0x23/0x30 - [<ffffffffa0754bc8>] brcmf_sdio_firmware_callback+0x2a8/0x5d0 [brcmfmac] - [<ffffffffa074deaf>] brcmf_fw_request_nvram_done+0x15f/0x5e0 [brcmfmac] - [<ffffffff8140142f>] ? devres_add+0x3f/0x50 - [<ffffffff810642b5>] ? usermodehelper_read_unlock+0x15/0x20 - [<ffffffff81400000>] ? platform_match+0x70/0xa0 - [<ffffffff8140f400>] request_firmware_work_func+0x30/0x60 - [<ffffffff8106828c>] process_one_work+0x14c/0x3d0 - [<ffffffff8106862a>] worker_thread+0x11a/0x450 - [<ffffffff81068510>] ? process_one_work+0x3d0/0x3d0 - [<ffffffff8106d692>] kthread+0xd2/0xf0 - [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180 - [<ffffffff815ed35f>] ret_from_fork+0x3f/0x70 - [<ffffffff8106d5c0>] ? kthread_create_on_node+0x180/0x180 - Code: e9 40 fe ff ff 48 89 d8 eb 87 66 0f 1f 84 00 00 00 00 00 66 66 66 66 - 90 55 48 89 e5 41 56 49 89 f6 41 55 49 89 d5 31 d2 41 54 53 <0f> b7 - 47 68 48 8b 5f 48 66 c1 e8 05 83 e0 01 4d 85 ed 0f b6 c8 - RIP [<ffffffff811e8f08>] kernfs_find_ns+0x18/0xd0 - RSP <ffff880036dd7a28> - CR2: 0000000000000068 - ---[ end trace 87d6ec0d3fe46740 ]--- - -Reported-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -1049,7 +1049,10 @@ int brcmf_bus_start(struct device *dev) - fail: - if (ret < 0) { - brcmf_err("failed: %d\n", ret); -- brcmf_cfg80211_detach(drvr->config); -+ if (drvr->config) { -+ brcmf_cfg80211_detach(drvr->config); -+ drvr->config = NULL; -+ } - if (drvr->fws) { - brcmf_fws_del_interface(ifp); - brcmf_fws_deinit(drvr); diff --git a/package/kernel/mac80211/patches/365-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch b/package/kernel/mac80211/patches/365-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch deleted file mode 100644 index 868b0a82e6..0000000000 --- a/package/kernel/mac80211/patches/365-0005-brcmfmac-correct-detection-of-p2pdev-interface-event.patch +++ /dev/null @@ -1,105 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:14:57 +0200 -Subject: [PATCH] brcmfmac: correct detection of p2pdev interface event - -The p2pdev interface is setup in firmware resulting in a interface -event. This event has role and no-if flag. When role is p2p client -and no-if flag is set it indicates that this is the p2pdev interface. -This info is used in handling the event and adding interface in the -driver. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -795,7 +795,7 @@ fail: - } - - struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, -- char *name, u8 *mac_addr) -+ bool is_p2pdev, char *name, u8 *mac_addr) - { - struct brcmf_if *ifp; - struct net_device *ndev; -@@ -821,7 +821,7 @@ struct brcmf_if *brcmf_add_if(struct brc - } - } - -- if (!brcmf_p2p_enable && bssidx == 1) { -+ if (!brcmf_p2p_enable && is_p2pdev) { - /* this is P2P_DEVICE interface */ - brcmf_dbg(INFO, "allocate non-netdev interface\n"); - ifp = kzalloc(sizeof(*ifp), GFP_KERNEL); -@@ -999,12 +999,12 @@ int brcmf_bus_start(struct device *dev) - brcmf_dbg(TRACE, "\n"); - - /* add primary networking interface */ -- ifp = brcmf_add_if(drvr, 0, 0, "wlan%d", NULL); -+ ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d", NULL); - if (IS_ERR(ifp)) - return PTR_ERR(ifp); - - if (brcmf_p2p_enable) -- p2p_ifp = brcmf_add_if(drvr, 1, 0, "p2p%d", NULL); -+ p2p_ifp = brcmf_add_if(drvr, 1, 0, false, "p2p%d", NULL); - else - p2p_ifp = NULL; - if (IS_ERR(p2p_ifp)) ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -205,7 +205,7 @@ char *brcmf_ifname(struct brcmf_pub *drv - struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx); - int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); - struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, -- char *name, u8 *mac_addr); -+ bool is_p2pdev, char *name, u8 *mac_addr); - void brcmf_remove_interface(struct brcmf_if *ifp); - int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr); - void brcmf_txflowblock_if(struct brcmf_if *ifp, ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -@@ -179,6 +179,7 @@ static void brcmf_fweh_handle_if_event(s - { - struct brcmf_if_event *ifevent = data; - struct brcmf_if *ifp; -+ bool is_p2pdev; - int err = 0; - - brcmf_dbg(EVENT, "action: %u idx: %u bsscfg: %u flags: %u role: %u\n", -@@ -186,18 +187,16 @@ static void brcmf_fweh_handle_if_event(s - ifevent->flags, ifevent->role); - - /* The P2P Device interface event must not be ignored -- * contrary to what firmware tells us. The only way to -- * distinguish the P2P Device is by looking at the ifidx -- * and bssidx received. -+ * contrary to what firmware tells us. - */ -- if (!(ifevent->ifidx == 0 && ifevent->bssidx == 1) && -- (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) { -+ is_p2pdev = (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) && -+ ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT; -+ if (!is_p2pdev && (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) { - brcmf_dbg(EVENT, "event can be ignored\n"); - return; - } - if (ifevent->ifidx >= BRCMF_MAX_IFS) { -- brcmf_err("invalid interface index: %u\n", -- ifevent->ifidx); -+ brcmf_err("invalid interface index: %u\n", ifevent->ifidx); - return; - } - -@@ -207,7 +206,7 @@ static void brcmf_fweh_handle_if_event(s - brcmf_dbg(EVENT, "adding %s (%pM)\n", emsg->ifname, - emsg->addr); - ifp = brcmf_add_if(drvr, ifevent->bssidx, ifevent->ifidx, -- emsg->ifname, emsg->addr); -+ is_p2pdev, emsg->ifname, emsg->addr); - if (IS_ERR(ifp)) - return; - brcmf_fws_add_interface(ifp); diff --git a/package/kernel/mac80211/patches/365-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch b/package/kernel/mac80211/patches/365-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch deleted file mode 100644 index aebbfa6c49..0000000000 --- a/package/kernel/mac80211/patches/365-0006-brcmfmac-use-brcmf_get_ifp-to-map-ifidx-to-struct-br.patch +++ /dev/null @@ -1,126 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:14:58 +0200 -Subject: [PATCH] brcmfmac: use brcmf_get_ifp() to map ifidx to struct - brcmf_if instance - -The knowledge on how to map the interface index to a struct brcmf_if -instance is in brcmf_get_ifp() so use that function when only the -interface index is known instead of accessing brcmf_pub::iflist -directly. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/btcoex.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/btcoex.c -@@ -149,7 +149,7 @@ static s32 brcmf_btcoex_params_read(stru - static void brcmf_btcoex_boost_wifi(struct brcmf_btcoex_info *btci, - bool trump_sco) - { -- struct brcmf_if *ifp = btci->cfg->pub->iflist[0]; -+ struct brcmf_if *ifp = brcmf_get_ifp(btci->cfg->pub, 0); - - if (trump_sco && !btci->saved_regs_part2) { - /* this should reduce eSCO agressive -@@ -468,7 +468,7 @@ int brcmf_btcoex_set_mode(struct brcmf_c - { - struct brcmf_cfg80211_info *cfg = wiphy_priv(vif->wdev.wiphy); - struct brcmf_btcoex_info *btci = cfg->btcoex; -- struct brcmf_if *ifp = cfg->pub->iflist[0]; -+ struct brcmf_if *ifp = brcmf_get_ifp(cfg->pub, 0); - - switch (mode) { - case BRCMF_BTCOEX_DISABLED: ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -6212,7 +6212,7 @@ static void brcmf_free_wiphy(struct wiph - struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, - struct device *busdev) - { -- struct net_device *ndev = drvr->iflist[0]->ndev; -+ struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev; - struct brcmf_cfg80211_info *cfg; - struct wiphy *wiphy; - struct brcmf_cfg80211_vif *vif; ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c -@@ -121,7 +121,7 @@ static void brcmf_feat_iovar_int_set(str - - void brcmf_feat_attach(struct brcmf_pub *drvr) - { -- struct brcmf_if *ifp = drvr->iflist[0]; -+ struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0); - - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan"); - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn"); ---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.c -@@ -221,7 +221,7 @@ static void brcmf_flowring_block(struct - - bus_if = dev_get_drvdata(flow->dev); - drvr = bus_if->drvr; -- ifp = drvr->iflist[ifidx]; -+ ifp = brcmf_get_ifp(drvr, ifidx); - brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_FLOW, blocked); - - spin_unlock_irqrestore(&flow->block_lock, flags); ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -@@ -334,7 +334,7 @@ void brcmf_fweh_attach(struct brcmf_pub - void brcmf_fweh_detach(struct brcmf_pub *drvr) - { - struct brcmf_fweh_info *fweh = &drvr->fweh; -- struct brcmf_if *ifp = drvr->iflist[0]; -+ struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0); - s8 eventmask[BRCMF_EVENTING_MASK_LEN]; - - if (ifp) { ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -@@ -972,7 +972,7 @@ static void - brcmf_fws_flow_control_check(struct brcmf_fws_info *fws, struct pktq *pq, - u8 if_id) - { -- struct brcmf_if *ifp = fws->drvr->iflist[!if_id ? 0 : if_id + 1]; -+ struct brcmf_if *ifp = brcmf_get_ifp(fws->drvr, if_id); - - if (WARN_ON(!ifp)) - return; -@@ -2118,6 +2118,7 @@ static int brcmf_debugfs_fws_stats_read( - int brcmf_fws_init(struct brcmf_pub *drvr) - { - struct brcmf_fws_info *fws; -+ struct brcmf_if *ifp; - u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS; - int rc; - u32 mode; -@@ -2177,21 +2178,22 @@ int brcmf_fws_init(struct brcmf_pub *drv - * continue. Set mode back to none indicating not enabled. - */ - fws->fw_signals = true; -- if (brcmf_fil_iovar_int_set(drvr->iflist[0], "tlv", tlv)) { -+ ifp = brcmf_get_ifp(drvr, 0); -+ if (brcmf_fil_iovar_int_set(ifp, "tlv", tlv)) { - brcmf_err("failed to set bdcv2 tlv signaling\n"); - fws->fcmode = BRCMF_FWS_FCMODE_NONE; - fws->fw_signals = false; - } - -- if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1)) -+ if (brcmf_fil_iovar_int_set(ifp, "ampdu_hostreorder", 1)) - brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n"); - - /* Enable seq number reuse, if supported */ -- if (brcmf_fil_iovar_int_get(drvr->iflist[0], "wlfc_mode", &mode) == 0) { -+ if (brcmf_fil_iovar_int_get(ifp, "wlfc_mode", &mode) == 0) { - if (BRCMF_FWS_MODE_GET_REUSESEQ(mode)) { - mode = 0; - BRCMF_FWS_MODE_SET_REUSESEQ(mode, 1); -- if (brcmf_fil_iovar_int_set(drvr->iflist[0], -+ if (brcmf_fil_iovar_int_set(ifp, - "wlfc_mode", mode) == 0) { - BRCMF_FWS_MODE_SET_REUSESEQ(fws->mode, 1); - } diff --git a/package/kernel/mac80211/patches/365-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch b/package/kernel/mac80211/patches/365-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch deleted file mode 100644 index 23a7b6f1c8..0000000000 --- a/package/kernel/mac80211/patches/365-0007-brcmfmac-pass-struct-brcmf_if-instance-in-brcmf_txfi.patch +++ /dev/null @@ -1,122 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:14:59 +0200 -Subject: [PATCH] brcmfmac: pass struct brcmf_if instance in - brcmf_txfinalize() - -Most call sites of brcmf_txfinalize already have struct brcmf_if -instance so pass that to brcmf_txfinalize() as the function -needs it anyway. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -560,17 +560,11 @@ void brcmf_rx_frame(struct device *dev, - brcmf_netif_rx(ifp, skb); - } - --void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, u8 ifidx, -- bool success) -+void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success) - { -- struct brcmf_if *ifp; - struct ethhdr *eh; - u16 type; - -- ifp = drvr->iflist[ifidx]; -- if (!ifp) -- goto done; -- - eh = (struct ethhdr *)(txp->data); - type = ntohs(eh->h_proto); - -@@ -582,7 +576,7 @@ void brcmf_txfinalize(struct brcmf_pub * - - if (!success) - ifp->stats.tx_errors++; --done: -+ - brcmu_pkt_buf_free_skb(txp); - } - -@@ -600,7 +594,7 @@ void brcmf_txcomplete(struct device *dev - if (brcmf_proto_hdrpull(drvr, false, txp, &ifp)) - brcmu_pkt_buf_free_skb(txp); - else -- brcmf_txfinalize(drvr, txp, ifp->ifidx, success); -+ brcmf_txfinalize(ifp, txp, success); - } - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -210,8 +210,7 @@ void brcmf_remove_interface(struct brcmf - int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr); - void brcmf_txflowblock_if(struct brcmf_if *ifp, - enum brcmf_netif_stop_reason reason, bool state); --void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, u8 ifidx, -- bool success); -+void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success); - void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb); - - /* Sets dongle media info (drv_version, mac address). */ ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -@@ -1506,7 +1506,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i - ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx, - genbit, seq); - if (remove_from_hanger || ret) -- brcmf_txfinalize(fws->drvr, skb, ifp->ifidx, true); -+ brcmf_txfinalize(ifp, skb, true); - - return 0; - } -@@ -1905,7 +1905,7 @@ int brcmf_fws_process_skb(struct brcmf_i - if (fws->avoid_queueing) { - rc = brcmf_proto_txdata(drvr, ifp->ifidx, 0, skb); - if (rc < 0) -- brcmf_txfinalize(drvr, skb, ifp->ifidx, false); -+ brcmf_txfinalize(ifp, skb, false); - return rc; - } - -@@ -1929,7 +1929,7 @@ int brcmf_fws_process_skb(struct brcmf_i - brcmf_fws_schedule_deq(fws); - } else { - brcmf_err("drop skb: no hanger slot\n"); -- brcmf_txfinalize(drvr, skb, ifp->ifidx, false); -+ brcmf_txfinalize(ifp, skb, false); - rc = -ENOMEM; - } - brcmf_fws_unlock(fws); -@@ -2009,8 +2009,9 @@ static void brcmf_fws_dequeue_worker(str - ret = brcmf_proto_txdata(drvr, ifidx, 0, skb); - brcmf_fws_lock(fws); - if (ret < 0) -- brcmf_txfinalize(drvr, skb, ifidx, -- false); -+ brcmf_txfinalize(brcmf_get_ifp(drvr, -+ ifidx), -+ skb, false); - if (fws->bus_flow_blocked) - break; - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -873,7 +873,11 @@ brcmf_msgbuf_process_txstatus(struct brc - commonring = msgbuf->flowrings[flowid]; - atomic_dec(&commonring->outstanding_tx); - -- brcmf_txfinalize(msgbuf->drvr, skb, tx_status->msg.ifidx, true); -+ /* Hante: i believe this was a bug as tx_status->msg.ifidx was used -+ * in brcmf_txfinalize as index in drvr->iflist. Can you confirm/deny? -+ */ -+ brcmf_txfinalize(brcmf_get_ifp(msgbuf->drvr, tx_status->msg.ifidx), -+ skb, true); - } - - diff --git a/package/kernel/mac80211/patches/365-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch b/package/kernel/mac80211/patches/365-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch deleted file mode 100644 index 8ddc0a6eef..0000000000 --- a/package/kernel/mac80211/patches/365-0008-brcmfmac-add-mapping-for-interface-index-to-bsscfg-i.patch +++ /dev/null @@ -1,92 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:15:00 +0200 -Subject: [PATCH] brcmfmac: add mapping for interface index to bsscfg - index - -Because the P2P Device interface in firmware uses the same interface -index as the primary interface we use the bsscfg index as index in the -struct brcmf_pub::iflist. However, in the data path we get the interface -index and not the bsscfg index. So we need a mapping of interface index -to bsscfg index, which can be determined upon handle adding the interface. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -85,21 +85,20 @@ char *brcmf_ifname(struct brcmf_pub *drv - - struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx) - { -+ struct brcmf_if *ifp; -+ s32 bssidx; -+ - if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) { - brcmf_err("ifidx %d out of range\n", ifidx); - return NULL; - } - -- /* The ifidx is the idx to map to matching netdev/ifp. When receiving -- * events this is easy because it contains the bssidx which maps -- * 1-on-1 to the netdev/ifp. But for data frames the ifidx is rcvd. -- * bssidx 1 is used for p2p0 and no data can be received or -- * transmitted on it. Therefor bssidx is ifidx + 1 if ifidx > 0 -- */ -- if (ifidx) -- ifidx++; -+ ifp = NULL; -+ bssidx = drvr->if2bss[ifidx]; -+ if (bssidx >= 0) -+ ifp = drvr->iflist[bssidx]; - -- return drvr->iflist[ifidx]; -+ return ifp; - } - - static void _brcmf_set_multicast_list(struct work_struct *work) -@@ -831,6 +830,8 @@ struct brcmf_if *brcmf_add_if(struct brc - - ifp = netdev_priv(ndev); - ifp->ndev = ndev; -+ /* store mapping ifidx to bssidx */ -+ drvr->if2bss[ifidx] = bssidx; - } - - ifp->drvr = drvr; -@@ -855,6 +856,7 @@ static void brcmf_del_if(struct brcmf_pu - struct brcmf_if *ifp; - - ifp = drvr->iflist[bssidx]; -+ drvr->if2bss[ifp->ifidx] = -1; - drvr->iflist[bssidx] = NULL; - if (!ifp) { - brcmf_err("Null interface, idx=%d\n", bssidx); -@@ -862,6 +864,7 @@ static void brcmf_del_if(struct brcmf_pu - } - brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx); - if (ifp->ndev) { -+ drvr->if2bss[ifp->ifidx] = -1; - if (bssidx == 0) { - if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { - rtnl_lock(); -@@ -926,6 +929,7 @@ int brcmf_attach(struct device *dev) - if (!drvr) - return -ENOMEM; - -+ memset(drvr->if2bss, 0xFF, sizeof(drvr->if2bss)); - mutex_init(&drvr->proto_block); - - /* Link to bus module */ ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -122,6 +122,7 @@ struct brcmf_pub { - struct mac_address addresses[BRCMF_MAX_IFS]; - - struct brcmf_if *iflist[BRCMF_MAX_IFS]; -+ s32 if2bss[BRCMF_MAX_IFS]; - - struct mutex proto_block; - unsigned char proto_buf[BRCMF_DCMD_MAXLEN]; diff --git a/package/kernel/mac80211/patches/365-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch b/package/kernel/mac80211/patches/365-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch deleted file mode 100644 index a0a798be93..0000000000 --- a/package/kernel/mac80211/patches/365-0009-brcmfmac-add-dedicated-debug-level-for-firmware-cons.patch +++ /dev/null @@ -1,103 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:15:01 +0200 -Subject: [PATCH] brcmfmac: add dedicated debug level for firmware - console logging - -Both PCIe and SDIO devices have the possibility to log the firmware -console output in kernel log. For PCIe it is logged when PCIE debug -level is enabled. For SDIO it is logged when user specifies a non-zero -console interval through debugfs. This patch tries to make it a -bit more consistent. The firmware console output is only logged when -FWCON debug level is enabled. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Pontus Fuchs <pontusf@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h -@@ -37,6 +37,7 @@ - #define BRCMF_SDIO_VAL 0x00020000 - #define BRCMF_MSGBUF_VAL 0x00040000 - #define BRCMF_PCIE_VAL 0x00080000 -+#define BRCMF_FWCON_VAL 0x00100000 - - /* set default print format */ - #undef pr_fmt -@@ -78,6 +79,7 @@ do { \ - #define BRCMF_GLOM_ON() (brcmf_msg_level & BRCMF_GLOM_VAL) - #define BRCMF_EVENT_ON() (brcmf_msg_level & BRCMF_EVENT_VAL) - #define BRCMF_FIL_ON() (brcmf_msg_level & BRCMF_FIL_VAL) -+#define BRCMF_FWCON_ON() (brcmf_msg_level & BRCMF_FWCON_VAL) - - #else /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */ - -@@ -90,6 +92,7 @@ do { \ - #define BRCMF_GLOM_ON() 0 - #define BRCMF_EVENT_ON() 0 - #define BRCMF_FIL_ON() 0 -+#define BRCMF_FWCON_ON() 0 - - #endif /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */ - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -644,7 +644,7 @@ static void brcmf_pcie_bus_console_init( - addr = console->base_addr + BRCMF_CONSOLE_BUFSIZE_OFFSET; - console->bufsize = brcmf_pcie_read_tcm32(devinfo, addr); - -- brcmf_dbg(PCIE, "Console: base %x, buf %x, size %d\n", -+ brcmf_dbg(FWCON, "Console: base %x, buf %x, size %d\n", - console->base_addr, console->buf_addr, console->bufsize); - } - -@@ -656,6 +656,9 @@ static void brcmf_pcie_bus_console_read( - u8 ch; - u32 newidx; - -+ if (!BRCMF_FWCON_ON()) -+ return; -+ - console = &devinfo->shared.console; - addr = console->base_addr + BRCMF_CONSOLE_WRITEIDX_OFFSET; - newidx = brcmf_pcie_read_tcm32(devinfo, addr); -@@ -677,7 +680,7 @@ static void brcmf_pcie_bus_console_read( - } - if (ch == '\n') { - console->log_str[console->log_idx] = 0; -- brcmf_dbg(PCIE, "CONSOLE: %s", console->log_str); -+ pr_debug("CONSOLE: %s", console->log_str); - console->log_idx = 0; - } - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -123,6 +123,7 @@ struct rte_console { - - #define BRCMF_FIRSTREAD (1 << 6) - -+#define BRCMF_CONSOLE 10 /* watchdog interval to poll console */ - - /* SBSDIO_DEVICE_CTL */ - -@@ -3204,6 +3205,8 @@ static void brcmf_sdio_debugfs_create(st - if (IS_ERR_OR_NULL(dentry)) - return; - -+ bus->console_interval = BRCMF_CONSOLE; -+ - brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read); - brcmf_debugfs_add_entry(drvr, "counters", - brcmf_debugfs_sdio_count_read); -@@ -3613,7 +3616,7 @@ static void brcmf_sdio_bus_watchdog(stru - } - #ifdef DEBUG - /* Poll for console output periodically */ -- if (bus->sdiodev->state == BRCMF_SDIOD_DATA && -+ if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() && - bus->console_interval != 0) { - bus->console.count += BRCMF_WD_POLL_MS; - if (bus->console.count >= bus->console_interval) { diff --git a/package/kernel/mac80211/patches/365-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch b/package/kernel/mac80211/patches/365-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch deleted file mode 100644 index 53e7edeee7..0000000000 --- a/package/kernel/mac80211/patches/365-0010-brcmfmac-remove-ifidx-parameter-from-brcmf_fws_txsta.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:15:02 +0200 -Subject: [PATCH] brcmfmac: remove ifidx parameter from - brcmf_fws_txstatus_suppressed() - -The brcmf_fws_txstatus_suppressed() function prototype specifies an -ifidx parameter which is not used within the function implementation. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -@@ -1398,7 +1398,7 @@ done: - } - - static int brcmf_fws_txstatus_suppressed(struct brcmf_fws_info *fws, int fifo, -- struct sk_buff *skb, u8 ifidx, -+ struct sk_buff *skb, - u32 genbit, u16 seq) - { - struct brcmf_fws_mac_descriptor *entry = brcmf_skbcb(skb)->mac; -@@ -1503,7 +1503,7 @@ brcmf_fws_txs_process(struct brcmf_fws_i - return -EINVAL; - } - if (!remove_from_hanger) -- ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, ifp->ifidx, -+ ret = brcmf_fws_txstatus_suppressed(fws, fifo, skb, - genbit, seq); - if (remove_from_hanger || ret) - brcmf_txfinalize(ifp, skb, true); diff --git a/package/kernel/mac80211/patches/365-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch b/package/kernel/mac80211/patches/365-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch deleted file mode 100644 index bb05235cf4..0000000000 --- a/package/kernel/mac80211/patches/365-0011-brcmfmac-change-prototype-for-brcmf_fws_hdrpull.patch +++ /dev/null @@ -1,97 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:15:03 +0200 -Subject: [PATCH] brcmfmac: change prototype for brcmf_fws_hdrpull() - -Instead of passing ifidx and drvr just pass struct brcmf_if pointer -which holds both parameters. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c -@@ -312,8 +312,7 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu - - skb_pull(pktbuf, BCDC_HEADER_LEN); - if (do_fws) -- brcmf_fws_hdrpull(drvr, tmp_if->ifidx, h->data_offset << 2, -- pktbuf); -+ brcmf_fws_hdrpull(tmp_if, h->data_offset << 2, pktbuf); - else - skb_pull(pktbuf, h->data_offset << 2); - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -@@ -1616,11 +1616,10 @@ static int brcmf_fws_notify_bcmc_credit_ - return 0; - } - --int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len, -- struct sk_buff *skb) -+void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb) - { - struct brcmf_skb_reorder_data *rd; -- struct brcmf_fws_info *fws = drvr->fws; -+ struct brcmf_fws_info *fws = ifp->drvr->fws; - u8 *signal_data; - s16 data_len; - u8 type; -@@ -1630,20 +1629,20 @@ int brcmf_fws_hdrpull(struct brcmf_pub * - s32 err; - - brcmf_dbg(HDRS, "enter: ifidx %d, skblen %u, sig %d\n", -- ifidx, skb->len, signal_len); -+ ifp->ifidx, skb->len, siglen); - -- WARN_ON(signal_len > skb->len); -+ WARN_ON(siglen > skb->len); - -- if (!signal_len) -- return 0; -+ if (!siglen) -+ return; - /* if flow control disabled, skip to packet data and leave */ - if ((!fws) || (!fws->fw_signals)) { -- skb_pull(skb, signal_len); -- return 0; -+ skb_pull(skb, siglen); -+ return; - } - - fws->stats.header_pulls++; -- data_len = signal_len; -+ data_len = siglen; - signal_data = skb->data; - - status = BRCMF_FWS_RET_OK_NOSCHEDULE; -@@ -1731,14 +1730,12 @@ int brcmf_fws_hdrpull(struct brcmf_pub * - /* signalling processing result does - * not affect the actual ethernet packet. - */ -- skb_pull(skb, signal_len); -+ skb_pull(skb, siglen); - - /* this may be a signal-only packet - */ - if (skb->len == 0) - fws->stats.header_only_pkt++; -- -- return 0; - } - - static u8 brcmf_fws_precommit_skb(struct brcmf_fws_info *fws, int fifo, ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.h -@@ -21,8 +21,7 @@ - int brcmf_fws_init(struct brcmf_pub *drvr); - void brcmf_fws_deinit(struct brcmf_pub *drvr); - bool brcmf_fws_fc_active(struct brcmf_fws_info *fws); --int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len, -- struct sk_buff *skb); -+void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb); - int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb); - - void brcmf_fws_reset_interface(struct brcmf_if *ifp); diff --git a/package/kernel/mac80211/patches/365-0012-brcmfmac-introduce-brcmf_net_detach-function.patch b/package/kernel/mac80211/patches/365-0012-brcmfmac-introduce-brcmf_net_detach-function.patch deleted file mode 100644 index ba92c6749b..0000000000 --- a/package/kernel/mac80211/patches/365-0012-brcmfmac-introduce-brcmf_net_detach-function.patch +++ /dev/null @@ -1,99 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 26 Aug 2015 22:15:04 +0200 -Subject: [PATCH] brcmfmac: introduce brcmf_net_detach() function - -In case of error during brcmf_bus_start() the network interfaces were -freed using free_netdev(). However, the interfaces may have additional -memory allocated which is not freed. The netdev has destructor set to -brcmf_cfg80211_free_netdev() which frees the additional memory if -allocated and call free_netdev(). The brcmf_net_detach() either calls -brcmf_cfg80211_free_netdev() directly or uses unregister_netdev() when -struct net_device::reg_state indicates the netdev was registered. - -Reported-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -4746,7 +4746,8 @@ void brcmf_cfg80211_free_netdev(struct n - ifp = netdev_priv(ndev); - vif = ifp->vif; - -- brcmf_free_vif(vif); -+ if (vif) -+ brcmf_free_vif(vif); - free_netdev(ndev); - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -718,8 +718,6 @@ int brcmf_net_attach(struct brcmf_if *if - } - - brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); -- -- ndev->destructor = brcmf_cfg80211_free_netdev; - return 0; - - fail: -@@ -729,6 +727,14 @@ fail: - return -EBADE; - } - -+static void brcmf_net_detach(struct net_device *ndev) -+{ -+ if (ndev->reg_state == NETREG_REGISTERED) -+ unregister_netdev(ndev); -+ else -+ brcmf_cfg80211_free_netdev(ndev); -+} -+ - static int brcmf_net_p2p_open(struct net_device *ndev) - { - brcmf_dbg(TRACE, "Enter\n"); -@@ -805,8 +811,7 @@ struct brcmf_if *brcmf_add_if(struct brc - ifp->ndev->name); - if (ifidx) { - netif_stop_queue(ifp->ndev); -- unregister_netdev(ifp->ndev); -- free_netdev(ifp->ndev); -+ brcmf_net_detach(ifp->ndev); - drvr->iflist[bssidx] = NULL; - } else { - brcmf_err("ignore IF event\n"); -@@ -828,6 +833,7 @@ struct brcmf_if *brcmf_add_if(struct brc - if (!ndev) - return ERR_PTR(-ENOMEM); - -+ ndev->destructor = brcmf_cfg80211_free_netdev; - ifp = netdev_priv(ndev); - ifp->ndev = ndev; - /* store mapping ifidx to bssidx */ -@@ -879,8 +885,7 @@ static void brcmf_del_if(struct brcmf_pu - cancel_work_sync(&ifp->setmacaddr_work); - cancel_work_sync(&ifp->multicast_work); - } -- /* unregister will take care of freeing it */ -- unregister_netdev(ifp->ndev); -+ brcmf_net_detach(ifp->ndev); - } - } - -@@ -1056,11 +1061,11 @@ fail: - brcmf_fws_deinit(drvr); - } - if (drvr->iflist[0]) { -- free_netdev(ifp->ndev); -+ brcmf_net_detach(ifp->ndev); - drvr->iflist[0] = NULL; - } - if (p2p_ifp) { -- free_netdev(p2p_ifp->ndev); -+ brcmf_net_detach(p2p_ifp->ndev); - drvr->iflist[1] = NULL; - } - return ret; diff --git a/package/kernel/mac80211/patches/366-brcmfmac-Reset-PCIE-devices-after-recognition.patch b/package/kernel/mac80211/patches/366-brcmfmac-Reset-PCIE-devices-after-recognition.patch deleted file mode 100644 index 5a7e447e25..0000000000 --- a/package/kernel/mac80211/patches/366-brcmfmac-Reset-PCIE-devices-after-recognition.patch +++ /dev/null @@ -1,193 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 27 Aug 2015 16:14:06 +0200 -Subject: [PATCH] brcmfmac: Reset PCIE devices after recognition. - -When PCIE type devices are being FW reloaded without being properly -reset then the device ends up in a locked state, requiring the -device to be completely powered down. This patch adds a reset -through watchdog at the moment the device (cores) has been -recognized. This will solve warm reboot issues. - -Cc: Rafal Milecki <zajec5@gmail.com> -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -101,6 +101,9 @@ - /* ARM Cortex M3 core, ID 0x82a */ - #define BCM4329_CORE_ARM_BASE 0x18002000 - -+/* Max possibly supported memory size (limited by IO mapped memory) */ -+#define BRCMF_CHIP_MAX_MEMSIZE (4 * 1024 * 1024) -+ - #define CORE_SB(base, field) \ - (base + SBCONFIGOFF + offsetof(struct sbconfig, field)) - #define SBCOREREV(sbidh) \ -@@ -687,6 +690,12 @@ static int brcmf_chip_get_raminfo(struct - brcmf_err("RAM size is undetermined\n"); - return -ENOMEM; - } -+ -+ if (ci->pub.ramsize > BRCMF_CHIP_MAX_MEMSIZE) { -+ brcmf_err("RAM size is incorrect\n"); -+ return -ENOMEM; -+ } -+ - return 0; - } - -@@ -899,6 +908,15 @@ static int brcmf_chip_recognition(struct - - /* assure chip is passive for core access */ - brcmf_chip_set_passive(&ci->pub); -+ -+ /* Call bus specific reset function now. Cores have been determined -+ * but further access may require a chip specific reset at this point. -+ */ -+ if (ci->ops->reset) { -+ ci->ops->reset(ci->ctx, &ci->pub); -+ brcmf_chip_set_passive(&ci->pub); -+ } -+ - return brcmf_chip_get_raminfo(ci); - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.h -@@ -73,6 +73,7 @@ struct brcmf_buscore_ops { - u32 (*read32)(void *ctx, u32 addr); - void (*write32)(void *ctx, u32 addr, u32 value); - int (*prepare)(void *ctx); -+ int (*reset)(void *ctx, struct brcmf_chip *chip); - int (*setup)(void *ctx, struct brcmf_chip *chip); - void (*activate)(void *ctx, struct brcmf_chip *chip, u32 rstvec); - }; ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -74,6 +74,8 @@ enum brcmf_pcie_state { - #define BRCMF_PCIE_REG_INTMASK 0x94 - #define BRCMF_PCIE_REG_SBMBX 0x98 - -+#define BRCMF_PCIE_REG_LINK_STATUS_CTRL 0xBC -+ - #define BRCMF_PCIE_PCIE2REG_INTMASK 0x24 - #define BRCMF_PCIE_PCIE2REG_MAILBOXINT 0x48 - #define BRCMF_PCIE_PCIE2REG_MAILBOXMASK 0x4C -@@ -466,6 +468,7 @@ brcmf_pcie_select_core(struct brcmf_pcie - - static void brcmf_pcie_reset_device(struct brcmf_pciedev_info *devinfo) - { -+ struct brcmf_core *core; - u16 cfg_offset[] = { BRCMF_PCIE_CFGREG_STATUS_CMD, - BRCMF_PCIE_CFGREG_PM_CSR, - BRCMF_PCIE_CFGREG_MSI_CAP, -@@ -484,32 +487,38 @@ static void brcmf_pcie_reset_device(stru - if (!devinfo->ci) - return; - -+ /* Disable ASPM */ - brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2); -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR, -- BRCMF_PCIE_CFGREG_LINK_STATUS_CTRL); -- lsc = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA); -+ pci_read_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL, -+ &lsc); - val = lsc & (~BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB); -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, val); -+ pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL, -+ val); - -+ /* Watchdog reset */ - brcmf_pcie_select_core(devinfo, BCMA_CORE_CHIPCOMMON); - WRITECC32(devinfo, watchdog, 4); - msleep(100); - -+ /* Restore ASPM */ - brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2); -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR, -- BRCMF_PCIE_CFGREG_LINK_STATUS_CTRL); -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, lsc); -+ pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_LINK_STATUS_CTRL, -+ lsc); - -- brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2); -- for (i = 0; i < ARRAY_SIZE(cfg_offset); i++) { -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR, -- cfg_offset[i]); -- val = brcmf_pcie_read_reg32(devinfo, -- BRCMF_PCIE_PCIE2REG_CONFIGDATA); -- brcmf_dbg(PCIE, "config offset 0x%04x, value 0x%04x\n", -- cfg_offset[i], val); -- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGDATA, -- val); -+ core = brcmf_chip_get_core(devinfo->ci, BCMA_CORE_PCIE2); -+ if (core->rev <= 13) { -+ for (i = 0; i < ARRAY_SIZE(cfg_offset); i++) { -+ brcmf_pcie_write_reg32(devinfo, -+ BRCMF_PCIE_PCIE2REG_CONFIGADDR, -+ cfg_offset[i]); -+ val = brcmf_pcie_read_reg32(devinfo, -+ BRCMF_PCIE_PCIE2REG_CONFIGDATA); -+ brcmf_dbg(PCIE, "config offset 0x%04x, value 0x%04x\n", -+ cfg_offset[i], val); -+ brcmf_pcie_write_reg32(devinfo, -+ BRCMF_PCIE_PCIE2REG_CONFIGDATA, -+ val); -+ } - } - } - -@@ -519,8 +528,6 @@ static void brcmf_pcie_attach(struct brc - u32 config; - - brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2); -- if (brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_INTMASK) != 0) -- brcmf_pcie_reset_device(devinfo); - /* BAR1 window may not be sized properly */ - brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2); - brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_CONFIGADDR, 0x4e0); -@@ -1636,6 +1643,23 @@ static int brcmf_pcie_buscoreprep(void * - } - - -+static int brcmf_pcie_buscore_reset(void *ctx, struct brcmf_chip *chip) -+{ -+ struct brcmf_pciedev_info *devinfo = (struct brcmf_pciedev_info *)ctx; -+ u32 val; -+ -+ devinfo->ci = chip; -+ brcmf_pcie_reset_device(devinfo); -+ -+ val = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT); -+ if (val != 0xffffffff) -+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT, -+ val); -+ -+ return 0; -+} -+ -+ - static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip, - u32 rstvec) - { -@@ -1647,6 +1671,7 @@ static void brcmf_pcie_buscore_activate( - - static const struct brcmf_buscore_ops brcmf_pcie_buscore_ops = { - .prepare = brcmf_pcie_buscoreprep, -+ .reset = brcmf_pcie_buscore_reset, - .activate = brcmf_pcie_buscore_activate, - .read32 = brcmf_pcie_buscore_read32, - .write32 = brcmf_pcie_buscore_write32, -@@ -1814,7 +1839,6 @@ brcmf_pcie_remove(struct pci_dev *pdev) - brcmf_pcie_intr_disable(devinfo); - - brcmf_detach(&pdev->dev); -- brcmf_pcie_reset_device(devinfo); - - kfree(bus->bus_priv.pcie); - kfree(bus->msgbuf->flowrings); diff --git a/package/kernel/mac80211/patches/367-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch b/package/kernel/mac80211/patches/367-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch deleted file mode 100644 index f7b3e40b66..0000000000 --- a/package/kernel/mac80211/patches/367-ath10k-fix-DMA-related-firmware-crashes-on-multiple-.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Sun, 13 Sep 2015 22:26:10 +0200 -Subject: [PATCH] ath10k: fix DMA related firmware crashes on multiple devices - -Some platforms really don't like DMA bursts of 256 bytes, and this -causes the firmware to crash when sending beacons. -Also, changing this based on the firmware version does not seem to make -much sense, so use 128 bytes for all versions. - -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/drivers/net/wireless/ath/ath10k/hw.h -+++ b/drivers/net/wireless/ath/ath10k/hw.h -@@ -253,7 +253,7 @@ struct ath10k_pktlog_hdr { - #define TARGET_10X_MAX_FRAG_ENTRIES 0 - - /* 10.2 parameters */ --#define TARGET_10_2_DMA_BURST_SIZE 1 -+#define TARGET_10_2_DMA_BURST_SIZE 0 - - /* Target specific defines for WMI-TLV firmware */ - #define TARGET_TLV_NUM_VDEVS 3 diff --git a/package/kernel/mac80211/patches/368-ath9k-declare-required-extra-tx-headroom.patch b/package/kernel/mac80211/patches/368-ath9k-declare-required-extra-tx-headroom.patch deleted file mode 100644 index c420d20bae..0000000000 --- a/package/kernel/mac80211/patches/368-ath9k-declare-required-extra-tx-headroom.patch +++ /dev/null @@ -1,22 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Thu, 24 Sep 2015 16:57:37 +0200 -Subject: [PATCH] ath9k: declare required extra tx headroom - -ath9k inserts padding between the 802.11 header and the data area (to -align it). Since it didn't declare this extra required headroom, this -led to some nasty issues like randomly dropped packets in some setups. - -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -867,6 +867,7 @@ static void ath9k_set_hw_capab(struct at - hw->max_rate_tries = 10; - hw->sta_data_size = sizeof(struct ath_node); - hw->vif_data_size = sizeof(struct ath_vif); -+ hw->extra_tx_headroom = 4; - - hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1; - hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1; diff --git a/package/kernel/mac80211/patches/369-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch b/package/kernel/mac80211/patches/369-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch deleted file mode 100644 index 1478efae77..0000000000 --- a/package/kernel/mac80211/patches/369-mac80211-initialize-tid-field-in-struct-ieee80211_tx.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Mon, 5 Oct 2015 17:41:25 +0200 -Subject: [PATCH] mac80211: initialize tid field in struct ieee80211_txq - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- - ---- a/net/mac80211/util.c -+++ b/net/mac80211/util.c -@@ -3323,9 +3323,11 @@ void ieee80211_init_tx_queue(struct ieee - if (sta) { - txqi->txq.sta = &sta->sta; - sta->sta.txq[tid] = &txqi->txq; -+ txqi->txq.tid = tid; - txqi->txq.ac = ieee802_1d_to_ac[tid & 7]; - } else { - sdata->vif.txq = &txqi->txq; -+ txqi->txq.tid = 0; - txqi->txq.ac = IEEE80211_AC_BE; - } - } diff --git a/package/kernel/mac80211/patches/370-0001-brcmfmac-Fix-exception-handling.patch b/package/kernel/mac80211/patches/370-0001-brcmfmac-Fix-exception-handling.patch deleted file mode 100644 index bcd10314d9..0000000000 --- a/package/kernel/mac80211/patches/370-0001-brcmfmac-Fix-exception-handling.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:04 +0200 -Subject: [PATCH] brcmfmac: Fix exception handling. - -In some exception situations the ifp->vif was not properly assigned -which could result in crash. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -6331,6 +6331,7 @@ wiphy_unreg_out: - priv_out: - wl_deinit_priv(cfg); - brcmf_free_vif(vif); -+ ifp->vif = NULL; - wiphy_out: - brcmf_free_wiphy(wiphy); - return NULL; diff --git a/package/kernel/mac80211/patches/370-0002-brcmfmac-Add-support-for-the-BCM4350-PCIE-device.patch b/package/kernel/mac80211/patches/370-0002-brcmfmac-Add-support-for-the-BCM4350-PCIE-device.patch deleted file mode 100644 index f4ab77b599..0000000000 --- a/package/kernel/mac80211/patches/370-0002-brcmfmac-Add-support-for-the-BCM4350-PCIE-device.patch +++ /dev/null @@ -1,81 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:05 +0200 -Subject: [PATCH] brcmfmac: Add support for the BCM4350 PCIE device. - -This patch adds support fo the BRCM4350 2x2 11ac PCIE device. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -647,6 +647,7 @@ static u32 brcmf_chip_tcm_rambase(struct - return 0x198000; - case BRCM_CC_4335_CHIP_ID: - case BRCM_CC_4339_CHIP_ID: -+ case BRCM_CC_4350_CHIP_ID: - case BRCM_CC_4354_CHIP_ID: - case BRCM_CC_4356_CHIP_ID: - case BRCM_CC_43567_CHIP_ID: ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -47,6 +47,8 @@ enum brcmf_pcie_state { - - #define BRCMF_PCIE_43602_FW_NAME "brcm/brcmfmac43602-pcie.bin" - #define BRCMF_PCIE_43602_NVRAM_NAME "brcm/brcmfmac43602-pcie.txt" -+#define BRCMF_PCIE_4350_FW_NAME "brcm/brcmfmac4350-pcie.bin" -+#define BRCMF_PCIE_4350_NVRAM_NAME "brcm/brcmfmac4350-pcie.txt" - #define BRCMF_PCIE_4356_FW_NAME "brcm/brcmfmac4356-pcie.bin" - #define BRCMF_PCIE_4356_NVRAM_NAME "brcm/brcmfmac4356-pcie.txt" - #define BRCMF_PCIE_43570_FW_NAME "brcm/brcmfmac43570-pcie.bin" -@@ -194,6 +196,8 @@ enum brcmf_pcie_state { - - MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4350_FW_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4350_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME); -@@ -1418,6 +1422,10 @@ static int brcmf_pcie_get_fwnames(struct - fw_name = BRCMF_PCIE_43602_FW_NAME; - nvram_name = BRCMF_PCIE_43602_NVRAM_NAME; - break; -+ case BRCM_CC_4350_CHIP_ID: -+ fw_name = BRCMF_PCIE_4350_FW_NAME; -+ nvram_name = BRCMF_PCIE_4350_NVRAM_NAME; -+ break; - case BRCM_CC_4356_CHIP_ID: - fw_name = BRCMF_PCIE_4356_FW_NAME; - nvram_name = BRCMF_PCIE_4356_NVRAM_NAME; -@@ -1956,6 +1964,7 @@ cleanup: - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 } - - static struct pci_device_id brcmf_pcie_devid_table[] = { -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID), ---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -@@ -39,6 +39,7 @@ - #define BRCM_CC_4339_CHIP_ID 0x4339 - #define BRCM_CC_43430_CHIP_ID 43430 - #define BRCM_CC_4345_CHIP_ID 0x4345 -+#define BRCM_CC_4350_CHIP_ID 0x4350 - #define BRCM_CC_4354_CHIP_ID 0x4354 - #define BRCM_CC_4356_CHIP_ID 0x4356 - #define BRCM_CC_43566_CHIP_ID 43566 -@@ -56,6 +57,7 @@ - #define BRCM_USB_BCMFW_DEVICE_ID 0x0bdc - - /* PCIE Device IDs */ -+#define BRCM_PCIE_4350_DEVICE_ID 0x43a3 - #define BRCM_PCIE_4354_DEVICE_ID 0x43df - #define BRCM_PCIE_4356_DEVICE_ID 0x43ec - #define BRCM_PCIE_43567_DEVICE_ID 0x43d3 diff --git a/package/kernel/mac80211/patches/370-0003-brcmfmac-Fix-set-and-get-tx-power-functions.patch b/package/kernel/mac80211/patches/370-0003-brcmfmac-Fix-set-and-get-tx-power-functions.patch deleted file mode 100644 index 62fdd8d745..0000000000 --- a/package/kernel/mac80211/patches/370-0003-brcmfmac-Fix-set-and-get-tx-power-functions.patch +++ /dev/null @@ -1,218 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:06 +0200 -Subject: [PATCH] brcmfmac: Fix set and get tx-power functions. - -Implementation of tx-power (get and set) related functions are -still assuming mW interface. This is wrong as functions use dbm -(or mbm) nowadays. As a result a tx power configuration could -result in wrong power configuration. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -236,89 +236,6 @@ static int brcmf_roamoff; - module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR); - MODULE_PARM_DESC(roamoff, "do not use internal roaming engine"); - --/* Quarter dBm units to mW -- * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153 -- * Table is offset so the last entry is largest mW value that fits in -- * a u16. -- */ -- --#define QDBM_OFFSET 153 /* Offset for first entry */ --#define QDBM_TABLE_LEN 40 /* Table size */ -- --/* Smallest mW value that will round up to the first table entry, QDBM_OFFSET. -- * Value is ( mW(QDBM_OFFSET - 1) + mW(QDBM_OFFSET) ) / 2 -- */ --#define QDBM_TABLE_LOW_BOUND 6493 /* Low bound */ -- --/* Largest mW value that will round down to the last table entry, -- * QDBM_OFFSET + QDBM_TABLE_LEN-1. -- * Value is ( mW(QDBM_OFFSET + QDBM_TABLE_LEN - 1) + -- * mW(QDBM_OFFSET + QDBM_TABLE_LEN) ) / 2. -- */ --#define QDBM_TABLE_HIGH_BOUND 64938 /* High bound */ -- --static const u16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = { --/* qdBm: +0 +1 +2 +3 +4 +5 +6 +7 */ --/* 153: */ 6683, 7079, 7499, 7943, 8414, 8913, 9441, 10000, --/* 161: */ 10593, 11220, 11885, 12589, 13335, 14125, 14962, 15849, --/* 169: */ 16788, 17783, 18836, 19953, 21135, 22387, 23714, 25119, --/* 177: */ 26607, 28184, 29854, 31623, 33497, 35481, 37584, 39811, --/* 185: */ 42170, 44668, 47315, 50119, 53088, 56234, 59566, 63096 --}; -- --static u16 brcmf_qdbm_to_mw(u8 qdbm) --{ -- uint factor = 1; -- int idx = qdbm - QDBM_OFFSET; -- -- if (idx >= QDBM_TABLE_LEN) -- /* clamp to max u16 mW value */ -- return 0xFFFF; -- -- /* scale the qdBm index up to the range of the table 0-40 -- * where an offset of 40 qdBm equals a factor of 10 mW. -- */ -- while (idx < 0) { -- idx += 40; -- factor *= 10; -- } -- -- /* return the mW value scaled down to the correct factor of 10, -- * adding in factor/2 to get proper rounding. -- */ -- return (nqdBm_to_mW_map[idx] + factor / 2) / factor; --} -- --static u8 brcmf_mw_to_qdbm(u16 mw) --{ -- u8 qdbm; -- int offset; -- uint mw_uint = mw; -- uint boundary; -- -- /* handle boundary case */ -- if (mw_uint <= 1) -- return 0; -- -- offset = QDBM_OFFSET; -- -- /* move mw into the range of the table */ -- while (mw_uint < QDBM_TABLE_LOW_BOUND) { -- mw_uint *= 10; -- offset -= 40; -- } -- -- for (qdbm = 0; qdbm < QDBM_TABLE_LEN - 1; qdbm++) { -- boundary = nqdBm_to_mW_map[qdbm] + (nqdBm_to_mW_map[qdbm + 1] - -- nqdBm_to_mW_map[qdbm]) / 2; -- if (mw_uint < boundary) -- break; -- } -- -- qdbm += (u8) offset; -- -- return qdbm; --} - - static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf, - struct cfg80211_chan_def *ch) -@@ -2016,16 +1933,14 @@ static s32 - brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, - enum nl80211_tx_power_setting type, s32 mbm) - { -- - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); - struct net_device *ndev = cfg_to_ndev(cfg); - struct brcmf_if *ifp = netdev_priv(ndev); -- u16 txpwrmw; -- s32 err = 0; -- s32 disable = 0; -- s32 dbm = MBM_TO_DBM(mbm); -+ s32 err; -+ s32 disable; -+ u32 qdbm = 127; - -- brcmf_dbg(TRACE, "Enter\n"); -+ brcmf_dbg(TRACE, "Enter %d %d\n", type, mbm); - if (!check_vif_up(ifp->vif)) - return -EIO; - -@@ -2034,12 +1949,20 @@ brcmf_cfg80211_set_tx_power(struct wiphy - break; - case NL80211_TX_POWER_LIMITED: - case NL80211_TX_POWER_FIXED: -- if (dbm < 0) { -+ if (mbm < 0) { - brcmf_err("TX_POWER_FIXED - dbm is negative\n"); - err = -EINVAL; - goto done; - } -+ qdbm = MBM_TO_DBM(4 * mbm); -+ if (qdbm > 127) -+ qdbm = 127; -+ qdbm |= WL_TXPWR_OVERRIDE; - break; -+ default: -+ brcmf_err("Unsupported type %d\n", type); -+ err = -EINVAL; -+ goto done; - } - /* Make sure radio is off or on as far as software is concerned */ - disable = WL_RADIO_SW_DISABLE << 16; -@@ -2047,52 +1970,44 @@ brcmf_cfg80211_set_tx_power(struct wiphy - if (err) - brcmf_err("WLC_SET_RADIO error (%d)\n", err); - -- if (dbm > 0xffff) -- txpwrmw = 0xffff; -- else -- txpwrmw = (u16) dbm; -- err = brcmf_fil_iovar_int_set(ifp, "qtxpower", -- (s32)brcmf_mw_to_qdbm(txpwrmw)); -+ err = brcmf_fil_iovar_int_set(ifp, "qtxpower", qdbm); - if (err) - brcmf_err("qtxpower error (%d)\n", err); -- cfg->conf->tx_power = dbm; - - done: -- brcmf_dbg(TRACE, "Exit\n"); -+ brcmf_dbg(TRACE, "Exit %d (qdbm)\n", qdbm & ~WL_TXPWR_OVERRIDE); - return err; - } - --static s32 brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, -- struct wireless_dev *wdev, -- s32 *dbm) -+static s32 -+brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, -+ s32 *dbm) - { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); -- struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); -- s32 txpwrdbm; -- u8 result; -- s32 err = 0; -+ struct net_device *ndev = cfg_to_ndev(cfg); -+ struct brcmf_if *ifp = netdev_priv(ndev); -+ s32 qdbm = 0; -+ s32 err; - - brcmf_dbg(TRACE, "Enter\n"); - if (!check_vif_up(ifp->vif)) - return -EIO; - -- err = brcmf_fil_iovar_int_get(ifp, "qtxpower", &txpwrdbm); -+ err = brcmf_fil_iovar_int_get(ifp, "qtxpower", &qdbm); - if (err) { - brcmf_err("error (%d)\n", err); - goto done; - } -- -- result = (u8) (txpwrdbm & ~WL_TXPWR_OVERRIDE); -- *dbm = (s32) brcmf_qdbm_to_mw(result); -+ *dbm = (qdbm & ~WL_TXPWR_OVERRIDE) / 4; - - done: -- brcmf_dbg(TRACE, "Exit\n"); -+ brcmf_dbg(TRACE, "Exit (0x%x %d)\n", qdbm, *dbm); - return err; - } - - static s32 - brcmf_cfg80211_config_default_key(struct wiphy *wiphy, struct net_device *ndev, -- u8 key_idx, bool unicast, bool multicast) -+ u8 key_idx, bool unicast, bool multicast) - { - struct brcmf_if *ifp = netdev_priv(ndev); - u32 index; diff --git a/package/kernel/mac80211/patches/370-0004-brcmfmac-Only-assign-primary-netdev-to-if2bss-array.patch b/package/kernel/mac80211/patches/370-0004-brcmfmac-Only-assign-primary-netdev-to-if2bss-array.patch deleted file mode 100644 index c51365fe29..0000000000 --- a/package/kernel/mac80211/patches/370-0004-brcmfmac-Only-assign-primary-netdev-to-if2bss-array.patch +++ /dev/null @@ -1,73 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:07 +0200 -Subject: [PATCH] brcmfmac: Only assign primary netdev to if2bss array. - -The if2bss allows for translation of ifidx to bssidx which has a 1:n -relation. Therefor only the first (primary) netdev should be -assigned in this array. This fixes the p2pon=1 module param usage. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -53,6 +53,8 @@ MODULE_LICENSE("Dual BSD/GPL"); - #define BRCMF_RXREORDER_EXPIDX_VALID 0x08 - #define BRCMF_RXREORDER_NEW_HOLE 0x10 - -+#define BRCMF_BSSIDX_INVALID -1 -+ - /* Error bits */ - int brcmf_msg_level; - module_param_named(debug, brcmf_msg_level, int, S_IRUSR | S_IWUSR); -@@ -837,7 +839,8 @@ struct brcmf_if *brcmf_add_if(struct brc - ifp = netdev_priv(ndev); - ifp->ndev = ndev; - /* store mapping ifidx to bssidx */ -- drvr->if2bss[ifidx] = bssidx; -+ if (drvr->if2bss[ifidx] == BRCMF_BSSIDX_INVALID) -+ drvr->if2bss[ifidx] = bssidx; - } - - ifp->drvr = drvr; -@@ -862,15 +865,15 @@ static void brcmf_del_if(struct brcmf_pu - struct brcmf_if *ifp; - - ifp = drvr->iflist[bssidx]; -- drvr->if2bss[ifp->ifidx] = -1; - drvr->iflist[bssidx] = NULL; - if (!ifp) { - brcmf_err("Null interface, idx=%d\n", bssidx); - return; - } - brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx); -+ if (drvr->if2bss[ifp->ifidx] == bssidx) -+ drvr->if2bss[ifp->ifidx] = BRCMF_BSSIDX_INVALID; - if (ifp->ndev) { -- drvr->if2bss[ifp->ifidx] = -1; - if (bssidx == 0) { - if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { - rtnl_lock(); -@@ -926,6 +929,7 @@ int brcmf_attach(struct device *dev) - { - struct brcmf_pub *drvr = NULL; - int ret = 0; -+ int i; - - brcmf_dbg(TRACE, "Enter\n"); - -@@ -934,7 +938,9 @@ int brcmf_attach(struct device *dev) - if (!drvr) - return -ENOMEM; - -- memset(drvr->if2bss, 0xFF, sizeof(drvr->if2bss)); -+ for (i = 0; i < ARRAY_SIZE(drvr->if2bss); i++) -+ drvr->if2bss[i] = BRCMF_BSSIDX_INVALID; -+ - mutex_init(&drvr->proto_block); - - /* Link to bus module */ diff --git a/package/kernel/mac80211/patches/370-0005-brcmfmac-Inform-p2p-module-about-p2pon-through-API.patch b/package/kernel/mac80211/patches/370-0005-brcmfmac-Inform-p2p-module-about-p2pon-through-API.patch deleted file mode 100644 index 3c1058d0ad..0000000000 --- a/package/kernel/mac80211/patches/370-0005-brcmfmac-Inform-p2p-module-about-p2pon-through-API.patch +++ /dev/null @@ -1,113 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:08 +0200 -Subject: [PATCH] brcmfmac: Inform p2p module about p2pon through API - -When the p2pon module param is used then p2p attach will initialize -p2p device iface in the firmware, but it is doing that by checking -data. It is cleaner to pass the p2pon information to p2p by API. -This information is also needed for other patch. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -6126,7 +6126,8 @@ static void brcmf_free_wiphy(struct wiph - } - - struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, -- struct device *busdev) -+ struct device *busdev, -+ bool p2pdev_forced) - { - struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev; - struct brcmf_cfg80211_info *cfg; -@@ -6218,7 +6219,7 @@ struct brcmf_cfg80211_info *brcmf_cfg802 - *cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - } - -- err = brcmf_p2p_attach(cfg); -+ err = brcmf_p2p_attach(cfg, p2pdev_forced); - if (err) { - brcmf_err("P2P initilisation failed (%d)\n", err); - goto wiphy_unreg_out; ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -@@ -469,7 +469,8 @@ brcmf_cfg80211_connect_info *cfg_to_conn - } - - struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr, -- struct device *busdev); -+ struct device *busdev, -+ bool p2pdev_forced); - void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg); - s32 brcmf_cfg80211_up(struct net_device *ndev); - s32 brcmf_cfg80211_down(struct net_device *ndev); ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -1044,7 +1044,8 @@ int brcmf_bus_start(struct device *dev) - - brcmf_fws_add_interface(ifp); - -- drvr->config = brcmf_cfg80211_attach(drvr, bus_if->dev); -+ drvr->config = brcmf_cfg80211_attach(drvr, bus_if->dev, -+ brcmf_p2p_enable); - if (drvr->config == NULL) { - ret = -ENOMEM; - goto fail; ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2333,7 +2333,7 @@ void brcmf_p2p_stop_device(struct wiphy - * - * @cfg: driver private data for cfg80211 interface. - */ --s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) -+s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced) - { - struct brcmf_if *pri_ifp; - struct brcmf_if *p2p_ifp; -@@ -2348,11 +2348,15 @@ s32 brcmf_p2p_attach(struct brcmf_cfg802 - - drvr = cfg->pub; - -- pri_ifp = drvr->iflist[0]; -- p2p_ifp = drvr->iflist[1]; -- -+ pri_ifp = brcmf_get_ifp(drvr, 0); - p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; - -+ if (p2pdev_forced) { -+ p2p_ifp = drvr->iflist[1]; -+ } else { -+ p2p_ifp = NULL; -+ p2p->p2pdev_dynamically = true; -+ } - if (p2p_ifp) { - p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE, - false); ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h -@@ -124,6 +124,7 @@ struct afx_hdl { - * @wait_next_af: thread synchronizing struct. - * @gon_req_action: about to send go negotiation requets frame. - * @block_gon_req_tx: drop tx go negotiation requets frame. -+ * @p2pdev_dynamically: is p2p device if created by module param or supplicant. - */ - struct brcmf_p2p_info { - struct brcmf_cfg80211_info *cfg; -@@ -144,9 +145,10 @@ struct brcmf_p2p_info { - struct completion wait_next_af; - bool gon_req_action; - bool block_gon_req_tx; -+ bool p2pdev_dynamically; - }; - --s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg); -+s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced); - void brcmf_p2p_detach(struct brcmf_p2p_info *p2p); - struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, - enum nl80211_iftype type, u32 *flags, diff --git a/package/kernel/mac80211/patches/370-0006-brcmfmac-Fix-bug-in-flowring-management.patch b/package/kernel/mac80211/patches/370-0006-brcmfmac-Fix-bug-in-flowring-management.patch deleted file mode 100644 index 66b2117693..0000000000 --- a/package/kernel/mac80211/patches/370-0006-brcmfmac-Fix-bug-in-flowring-management.patch +++ /dev/null @@ -1,26 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:09 +0200 -Subject: [PATCH] brcmfmac: Fix bug in flowring management. - -The hash index stored in the flowrings is of type u16 but gets -stored in u8. This can result in incorrect indexing and possibly -result in crashes. This patch fixes the type. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/flowring.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/flowring.h -@@ -34,7 +34,7 @@ enum ring_status { - }; - - struct brcmf_flowring_ring { -- u8 hash_id; -+ u16 hash_id; - bool blocked; - enum ring_status status; - struct sk_buff_head skblist; diff --git a/package/kernel/mac80211/patches/370-0007-brcmfmac-Make-p2pon-module-param-always-available.patch b/package/kernel/mac80211/patches/370-0007-brcmfmac-Make-p2pon-module-param-always-available.patch deleted file mode 100644 index c143c3ba75..0000000000 --- a/package/kernel/mac80211/patches/370-0007-brcmfmac-Make-p2pon-module-param-always-available.patch +++ /dev/null @@ -1,29 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:10 +0200 -Subject: [PATCH] brcmfmac: Make p2pon module param always available. - -p2pon module param is currently under define BRCMDBG. Though it is -a needed option for older versions of the wpa_supplicant which do not -support the P2P_DEVICE interface. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -62,10 +62,8 @@ MODULE_PARM_DESC(debug, "level of debug - - /* P2P0 enable */ - static int brcmf_p2p_enable; --#ifdef CPTCFG_BRCMDBG - module_param_named(p2pon, brcmf_p2p_enable, int, 0); --MODULE_PARM_DESC(p2pon, "enable p2p management functionality"); --#endif -+MODULE_PARM_DESC(p2pon, "enable legacy p2p management functionality"); - - char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx) - { diff --git a/package/kernel/mac80211/patches/370-0008-brcmfmac-Workaround-in-change-vif-for-wpa_supplicant.patch b/package/kernel/mac80211/patches/370-0008-brcmfmac-Workaround-in-change-vif-for-wpa_supplicant.patch deleted file mode 100644 index 15ac2d900a..0000000000 --- a/package/kernel/mac80211/patches/370-0008-brcmfmac-Workaround-in-change-vif-for-wpa_supplicant.patch +++ /dev/null @@ -1,76 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:11 +0200 -Subject: [PATCH] brcmfmac: Workaround in change vif for wpa_supplicant - support. - -Different wpa_supplicants have different behavior and expectations -regarding the change_virtual_intf behavior. This patch implements -a workaround for the different versions and possible brcmfmac -configuration. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -776,6 +776,37 @@ brcmf_cfg80211_change_iface(struct wiphy - s32 err = 0; - - brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type); -+ -+ /* WAR: There are a number of p2p interface related problems which -+ * need to be handled initially (before doing the validate). -+ * wpa_supplicant tends to do iface changes on p2p device/client/go -+ * which are not always possible/allowed. However we need to return -+ * OK otherwise the wpa_supplicant wont start. The situation differs -+ * on configuration and setup (p2pon=1 module param). The first check -+ * is to see if the request is a change to station for p2p iface. -+ */ -+ if ((type == NL80211_IFTYPE_STATION) && -+ ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) || -+ (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) || -+ (vif->wdev.iftype == NL80211_IFTYPE_P2P_DEVICE))) { -+ brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n"); -+ /* Now depending on whether module param p2pon=1 was used the -+ * response needs to be either 0 or EOPNOTSUPP. The reason is -+ * that if p2pon=1 is used, but a newer supplicant is used then -+ * we should return an error, as this combination wont work. -+ * In other situations 0 is returned and supplicant will start -+ * normally. It will give a trace in cfg80211, but it is the -+ * only way to get it working. Unfortunately this will result -+ * in situation where we wont support new supplicant in -+ * combination with module param p2pon=1, but that is the way -+ * it is. If the user tries this then unloading of driver might -+ * fail/lock. -+ */ -+ if (cfg->p2p.p2pdev_dynamically) -+ return -EOPNOTSUPP; -+ else -+ return 0; -+ } - err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type); - if (err) { - brcmf_err("iface validation failed: err=%d\n", err); -@@ -791,18 +822,6 @@ brcmf_cfg80211_change_iface(struct wiphy - infra = 0; - break; - case NL80211_IFTYPE_STATION: -- /* Ignore change for p2p IF. Unclear why supplicant does this */ -- if ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) || -- (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO)) { -- brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n"); -- /* WAR: It is unexpected to get a change of VIF for P2P -- * IF, but it happens. The request can not be handled -- * but returning EPERM causes a crash. Returning 0 -- * without setting ieee80211_ptr->iftype causes trace -- * (WARN_ON) but it works with wpa_supplicant -- */ -- return 0; -- } - infra = 1; - break; - case NL80211_IFTYPE_AP: diff --git a/package/kernel/mac80211/patches/370-0009-brcmfmac-Deleting-of-p2p-device-is-leaking-memory.patch b/package/kernel/mac80211/patches/370-0009-brcmfmac-Deleting-of-p2p-device-is-leaking-memory.patch deleted file mode 100644 index 1988b5cb6b..0000000000 --- a/package/kernel/mac80211/patches/370-0009-brcmfmac-Deleting-of-p2p-device-is-leaking-memory.patch +++ /dev/null @@ -1,124 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:12 +0200 -Subject: [PATCH] brcmfmac: Deleting of p2p device is leaking memory. - -When a p2p device gets deleted, the memory for the vif is not being -released. This is solved by reorganizing the cleanup path and -properly freeing the memory. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -887,6 +887,16 @@ static void brcmf_del_if(struct brcmf_pu - cancel_work_sync(&ifp->multicast_work); - } - brcmf_net_detach(ifp->ndev); -+ } else { -+ /* Only p2p device interfaces which get dynamically created -+ * end up here. In this case the p2p module should be informed -+ * about the removal of the interface within the firmware. If -+ * not then p2p commands towards the firmware will cause some -+ * serious troublesome side effects. The p2p module will clean -+ * up the ifp if needed. -+ */ -+ brcmf_p2p_ifp_removed(ifp); -+ kfree(ifp); - } - } - -@@ -894,7 +904,8 @@ void brcmf_remove_interface(struct brcmf - { - if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bssidx] != ifp)) - return; -- -+ brcmf_dbg(TRACE, "Enter, bssidx=%d, ifidx=%d\n", ifp->bssidx, -+ ifp->ifidx); - brcmf_fws_del_interface(ifp); - brcmf_del_if(ifp->drvr, ifp->bssidx); - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2131,20 +2131,6 @@ fail: - } - - /** -- * brcmf_p2p_delete_p2pdev() - delete P2P_DEVICE virtual interface. -- * -- * @vif: virtual interface object to delete. -- */ --static void brcmf_p2p_delete_p2pdev(struct brcmf_p2p_info *p2p, -- struct brcmf_cfg80211_vif *vif) --{ -- cfg80211_unregister_wdev(&vif->wdev); -- p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; -- brcmf_remove_interface(vif->ifp); -- brcmf_free_vif(vif); --} -- --/** - * brcmf_p2p_add_vif() - create a new P2P virtual interface. - * - * @wiphy: wiphy device of new interface. -@@ -2264,9 +2250,11 @@ int brcmf_p2p_del_vif(struct wiphy *wiph - break; - - case NL80211_IFTYPE_P2P_DEVICE: -+ if (!p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif) -+ return 0; - brcmf_p2p_cancel_remain_on_channel(vif->ifp); - brcmf_p2p_deinit_discovery(p2p); -- brcmf_p2p_delete_p2pdev(p2p, vif); -+ brcmf_remove_interface(vif->ifp); - return 0; - default: - return -ENOTSUPP; -@@ -2298,6 +2286,21 @@ int brcmf_p2p_del_vif(struct wiphy *wiph - return err; - } - -+void brcmf_p2p_ifp_removed(struct brcmf_if *ifp) -+{ -+ struct brcmf_cfg80211_info *cfg; -+ struct brcmf_cfg80211_vif *vif; -+ -+ brcmf_dbg(INFO, "P2P: device interface removed\n"); -+ vif = ifp->vif; -+ cfg = wdev_to_cfg(&vif->wdev); -+ cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; -+ rtnl_lock(); -+ cfg80211_unregister_wdev(&vif->wdev); -+ rtnl_unlock(); -+ brcmf_free_vif(vif); -+} -+ - int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev) - { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); -@@ -2422,10 +2425,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_i - if (vif != NULL) { - brcmf_p2p_cancel_remain_on_channel(vif->ifp); - brcmf_p2p_deinit_discovery(p2p); -- /* remove discovery interface */ -- rtnl_lock(); -- brcmf_p2p_delete_p2pdev(p2p, vif); -- rtnl_unlock(); -+ brcmf_remove_interface(vif->ifp); - } - /* just set it all to zero */ - memset(p2p, 0, sizeof(*p2p)); ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h -@@ -156,6 +156,7 @@ struct wireless_dev *brcmf_p2p_add_vif(s - int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); - int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, - enum brcmf_fil_p2p_if_types if_type); -+void brcmf_p2p_ifp_removed(struct brcmf_if *ifp); - int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); - void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); - int brcmf_p2p_scan_prep(struct wiphy *wiphy, diff --git a/package/kernel/mac80211/patches/370-0010-brcmfmac-Only-handle-p2p_stop_device-if-vif-is-valid.patch b/package/kernel/mac80211/patches/370-0010-brcmfmac-Only-handle-p2p_stop_device-if-vif-is-valid.patch deleted file mode 100644 index 5225c9e5bc..0000000000 --- a/package/kernel/mac80211/patches/370-0010-brcmfmac-Only-handle-p2p_stop_device-if-vif-is-valid.patch +++ /dev/null @@ -1,40 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:13 +0200 -Subject: [PATCH] brcmfmac: Only handle p2p_stop_device if vif is valid - -In some situations it is possible that vif has been removed while -cfg80211 invokes the p2p_stop_device handler. This will result in -crash. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2324,11 +2324,17 @@ void brcmf_p2p_stop_device(struct wiphy - struct brcmf_cfg80211_vif *vif; - - vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); -- mutex_lock(&cfg->usr_sync); -- (void)brcmf_p2p_deinit_discovery(p2p); -- brcmf_abort_scanning(cfg); -- clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state); -- mutex_unlock(&cfg->usr_sync); -+ /* This call can be result of the unregister_wdev call. In that case -+ * we dont want to do anything anymore. Just return. The config vif -+ * will have been cleared at this point. -+ */ -+ if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif == vif) { -+ mutex_lock(&cfg->usr_sync); -+ (void)brcmf_p2p_deinit_discovery(p2p); -+ brcmf_abort_scanning(cfg); -+ clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state); -+ mutex_unlock(&cfg->usr_sync); -+ } - } - - /** diff --git a/package/kernel/mac80211/patches/370-0011-brcmfmac-Fix-p2p-bug-for-older-firmwares.patch b/package/kernel/mac80211/patches/370-0011-brcmfmac-Fix-p2p-bug-for-older-firmwares.patch deleted file mode 100644 index e2f24e866b..0000000000 --- a/package/kernel/mac80211/patches/370-0011-brcmfmac-Fix-p2p-bug-for-older-firmwares.patch +++ /dev/null @@ -1,35 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:14 +0200 -Subject: [PATCH] brcmfmac: Fix p2p bug for older firmwares. - -Some devices with older firmwares are reporting new p2p device -interface with the wrong type. Accept this type to get p2p -working for these devices. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -@@ -186,11 +186,13 @@ static void brcmf_fweh_handle_if_event(s - ifevent->action, ifevent->ifidx, ifevent->bssidx, - ifevent->flags, ifevent->role); - -- /* The P2P Device interface event must not be ignored -- * contrary to what firmware tells us. -+ /* The P2P Device interface event must not be ignored contrary to what -+ * firmware tells us. Older firmware uses p2p noif, with sta role. -+ * This should be accepted. - */ -- is_p2pdev = (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) && -- ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT; -+ is_p2pdev = ((ifevent->flags & BRCMF_E_IF_FLAG_NOIF) && -+ (ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT || -+ ifevent->role == BRCMF_E_IF_ROLE_STA)); - if (!is_p2pdev && (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) { - brcmf_dbg(EVENT, "event can be ignored\n"); - return; diff --git a/package/kernel/mac80211/patches/370-0012-brcmfmac-Add-module-parameter-to-disable-features.patch b/package/kernel/mac80211/patches/370-0012-brcmfmac-Add-module-parameter-to-disable-features.patch deleted file mode 100644 index 52c787ff61..0000000000 --- a/package/kernel/mac80211/patches/370-0012-brcmfmac-Add-module-parameter-to-disable-features.patch +++ /dev/null @@ -1,54 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:15 +0200 -Subject: [PATCH] brcmfmac: Add module parameter to disable features. - -For debugging purpose it is very handy to be able to disable -features. It has happened a few times that new features turned -out not always being properly detected for all devices/firmwares. -Making it possible to disable the feature with a module parameter -will make testing/debugging easier. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c -@@ -15,6 +15,7 @@ - */ - - #include <linux/netdevice.h> -+#include <linux/module.h> - - #include <brcm_hw_ids.h> - #include "core.h" -@@ -23,6 +24,12 @@ - #include "fwil.h" - #include "feature.h" - -+ -+/* Module param feature_disable (global for all devices) */ -+static int brcmf_feature_disable; -+module_param_named(feature_disable, brcmf_feature_disable, int, 0); -+MODULE_PARM_DESC(feature_disable, "Disable features"); -+ - /* - * expand feature list to array of feature strings. - */ -@@ -131,6 +138,12 @@ void brcmf_feat_attach(struct brcmf_pub - brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0); - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p"); - -+ if (brcmf_feature_disable) { -+ brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n", -+ ifp->drvr->feat_flags, brcmf_feature_disable); -+ ifp->drvr->feat_flags &= ~brcmf_feature_disable; -+ } -+ - /* set chip related quirks */ - switch (drvr->bus_if->chip) { - case BRCM_CC_43236_CHIP_ID: diff --git a/package/kernel/mac80211/patches/370-0013-brcmfmac-Fix-race-condition-bug-when-deleting-p2p-in.patch b/package/kernel/mac80211/patches/370-0013-brcmfmac-Fix-race-condition-bug-when-deleting-p2p-in.patch deleted file mode 100644 index 58a638aa08..0000000000 --- a/package/kernel/mac80211/patches/370-0013-brcmfmac-Fix-race-condition-bug-when-deleting-p2p-in.patch +++ /dev/null @@ -1,80 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:16 +0200 -Subject: [PATCH] brcmfmac: Fix race condition bug when deleting p2p interface. - -When p2p device interface gets deleted by deinitialising discovery -it will result in an event which removes the interface, but that is -also done by delete p2p interface code. This results in race -condition which sometimes results in lockup/crash. With this patch -the delete device interface will wait for the event (with timeout) -removing the possible race condition. Also on the stop device call -from cfg80211 the deinitialisation of the discovery device should -be avoided as it can result in a similar situation. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2238,6 +2238,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph - brcmf_dbg(TRACE, "delete P2P vif\n"); - vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); - -+ brcmf_cfg80211_arm_vif_event(cfg, vif); - switch (vif->wdev.iftype) { - case NL80211_IFTYPE_P2P_CLIENT: - if (test_bit(BRCMF_VIF_STATUS_DISCONNECTING, &vif->sme_state)) -@@ -2254,8 +2255,6 @@ int brcmf_p2p_del_vif(struct wiphy *wiph - return 0; - brcmf_p2p_cancel_remain_on_channel(vif->ifp); - brcmf_p2p_deinit_discovery(p2p); -- brcmf_remove_interface(vif->ifp); -- return 0; - default: - return -ENOTSUPP; - } -@@ -2267,10 +2266,11 @@ int brcmf_p2p_del_vif(struct wiphy *wiph - wait_for_completion_timeout(&cfg->vif_disabled, - msecs_to_jiffies(500)); - -- brcmf_vif_clear_mgmt_ies(vif); -- -- brcmf_cfg80211_arm_vif_event(cfg, vif); -- err = brcmf_p2p_release_p2p_if(vif); -+ err = 0; -+ if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE) { -+ brcmf_vif_clear_mgmt_ies(vif); -+ err = brcmf_p2p_release_p2p_if(vif); -+ } - if (!err) { - /* wait for firmware event */ - err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, -@@ -2280,8 +2280,12 @@ int brcmf_p2p_del_vif(struct wiphy *wiph - else - err = 0; - } -+ if (err) -+ brcmf_remove_interface(vif->ifp); -+ - brcmf_cfg80211_arm_vif_event(cfg, NULL); -- p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; -+ if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE) -+ p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; - - return err; - } -@@ -2330,7 +2334,9 @@ void brcmf_p2p_stop_device(struct wiphy - */ - if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif == vif) { - mutex_lock(&cfg->usr_sync); -- (void)brcmf_p2p_deinit_discovery(p2p); -+ /* Set the discovery state to SCAN */ -+ (void)brcmf_p2p_set_discover_state(vif->ifp, -+ WL_P2P_DISC_ST_SCAN, 0, 0); - brcmf_abort_scanning(cfg); - clear_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state); - mutex_unlock(&cfg->usr_sync); diff --git a/package/kernel/mac80211/patches/370-0014-brcmfmac-Add-support-for-the-BCM4365-and-BCM4366-PCI.patch b/package/kernel/mac80211/patches/370-0014-brcmfmac-Add-support-for-the-BCM4365-and-BCM4366-PCI.patch deleted file mode 100644 index d0bbf2a878..0000000000 --- a/package/kernel/mac80211/patches/370-0014-brcmfmac-Add-support-for-the-BCM4365-and-BCM4366-PCI.patch +++ /dev/null @@ -1,277 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:17 +0200 -Subject: [PATCH] brcmfmac: Add support for the BCM4365 and BCM4366 PCIE - devices. - -This patch adds support for the BCM4365 and BCM4366 11ac Wave2 -PCIE devices. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -208,6 +208,7 @@ struct sbsocramregs { - }; - - #define SOCRAMREGOFFS(_f) offsetof(struct sbsocramregs, _f) -+#define SYSMEMREGOFFS(_f) offsetof(struct sbsocramregs, _f) - - #define ARMCR4_CAP (0x04) - #define ARMCR4_BANKIDX (0x40) -@@ -516,6 +517,9 @@ static int brcmf_chip_cores_check(struct - case BCMA_CORE_ARM_CR4: - cpu_found = true; - break; -+ case BCMA_CORE_ARM_CA7: -+ cpu_found = true; -+ break; - default: - break; - } -@@ -614,6 +618,29 @@ static void brcmf_chip_socram_ramsize(st - } - } - -+/** Return the SYS MEM size */ -+static u32 brcmf_chip_sysmem_ramsize(struct brcmf_core_priv *sysmem) -+{ -+ u32 memsize = 0; -+ u32 coreinfo; -+ u32 idx; -+ u32 nb; -+ u32 banksize; -+ -+ if (!brcmf_chip_iscoreup(&sysmem->pub)) -+ brcmf_chip_resetcore(&sysmem->pub, 0, 0, 0); -+ -+ coreinfo = brcmf_chip_core_read32(sysmem, SYSMEMREGOFFS(coreinfo)); -+ nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT; -+ -+ for (idx = 0; idx < nb; idx++) { -+ brcmf_chip_socram_banksize(sysmem, idx, &banksize); -+ memsize += banksize; -+ } -+ -+ return memsize; -+} -+ - /** Return the TCM-RAM size of the ARMCR4 core. */ - static u32 brcmf_chip_tcm_ramsize(struct brcmf_core_priv *cr4) - { -@@ -656,6 +683,9 @@ static u32 brcmf_chip_tcm_rambase(struct - case BRCM_CC_4358_CHIP_ID: - case BRCM_CC_43602_CHIP_ID: - return 0x180000; -+ case BRCM_CC_4365_CHIP_ID: -+ case BRCM_CC_4366_CHIP_ID: -+ return 0x200000; - default: - brcmf_err("unknown chip: %s\n", ci->pub.name); - break; -@@ -678,10 +708,28 @@ static int brcmf_chip_get_raminfo(struct - return -EINVAL; - } - } else { -- mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_INTERNAL_MEM); -- mem_core = container_of(mem, struct brcmf_core_priv, pub); -- brcmf_chip_socram_ramsize(mem_core, &ci->pub.ramsize, -- &ci->pub.srsize); -+ mem = brcmf_chip_get_core(&ci->pub, BCMA_CORE_SYS_MEM); -+ if (mem) { -+ mem_core = container_of(mem, struct brcmf_core_priv, -+ pub); -+ ci->pub.ramsize = brcmf_chip_sysmem_ramsize(mem_core); -+ ci->pub.rambase = brcmf_chip_tcm_rambase(ci); -+ if (!ci->pub.rambase) { -+ brcmf_err("RAM base not provided with ARM CA7 core\n"); -+ return -EINVAL; -+ } -+ } else { -+ mem = brcmf_chip_get_core(&ci->pub, -+ BCMA_CORE_INTERNAL_MEM); -+ if (!mem) { -+ brcmf_err("No memory cores found\n"); -+ return -ENOMEM; -+ } -+ mem_core = container_of(mem, struct brcmf_core_priv, -+ pub); -+ brcmf_chip_socram_ramsize(mem_core, &ci->pub.ramsize, -+ &ci->pub.srsize); -+ } - } - brcmf_dbg(INFO, "RAM: base=0x%x size=%d (0x%x) sr=%d (0x%x)\n", - ci->pub.rambase, ci->pub.ramsize, ci->pub.ramsize, -@@ -924,7 +972,7 @@ static int brcmf_chip_recognition(struct - static void brcmf_chip_disable_arm(struct brcmf_chip_priv *chip, u16 id) - { - struct brcmf_core *core; -- struct brcmf_core_priv *cr4; -+ struct brcmf_core_priv *cpu; - u32 val; - - -@@ -937,10 +985,11 @@ static void brcmf_chip_disable_arm(struc - brcmf_chip_coredisable(core, 0, 0); - break; - case BCMA_CORE_ARM_CR4: -- cr4 = container_of(core, struct brcmf_core_priv, pub); -+ case BCMA_CORE_ARM_CA7: -+ cpu = container_of(core, struct brcmf_core_priv, pub); - - /* clear all IOCTL bits except HALT bit */ -- val = chip->ops->read32(chip->ctx, cr4->wrapbase + BCMA_IOCTL); -+ val = chip->ops->read32(chip->ctx, cpu->wrapbase + BCMA_IOCTL); - val &= ARMCR4_BCMA_IOCTL_CPUHALT; - brcmf_chip_resetcore(core, val, ARMCR4_BCMA_IOCTL_CPUHALT, - ARMCR4_BCMA_IOCTL_CPUHALT); -@@ -1162,6 +1211,33 @@ static bool brcmf_chip_cr4_set_active(st - return true; - } - -+static inline void -+brcmf_chip_ca7_set_passive(struct brcmf_chip_priv *chip) -+{ -+ struct brcmf_core *core; -+ -+ brcmf_chip_disable_arm(chip, BCMA_CORE_ARM_CA7); -+ -+ core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_80211); -+ brcmf_chip_resetcore(core, D11_BCMA_IOCTL_PHYRESET | -+ D11_BCMA_IOCTL_PHYCLOCKEN, -+ D11_BCMA_IOCTL_PHYCLOCKEN, -+ D11_BCMA_IOCTL_PHYCLOCKEN); -+} -+ -+static bool brcmf_chip_ca7_set_active(struct brcmf_chip_priv *chip, u32 rstvec) -+{ -+ struct brcmf_core *core; -+ -+ chip->ops->activate(chip->ctx, &chip->pub, rstvec); -+ -+ /* restore ARM */ -+ core = brcmf_chip_get_core(&chip->pub, BCMA_CORE_ARM_CA7); -+ brcmf_chip_resetcore(core, ARMCR4_BCMA_IOCTL_CPUHALT, 0, 0); -+ -+ return true; -+} -+ - void brcmf_chip_set_passive(struct brcmf_chip *pub) - { - struct brcmf_chip_priv *chip; -@@ -1175,8 +1251,16 @@ void brcmf_chip_set_passive(struct brcmf - brcmf_chip_cr4_set_passive(chip); - return; - } -- -- brcmf_chip_cm3_set_passive(chip); -+ arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CA7); -+ if (arm) { -+ brcmf_chip_ca7_set_passive(chip); -+ return; -+ } -+ arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CM3); -+ if (arm) { -+ brcmf_chip_cm3_set_passive(chip); -+ return; -+ } - } - - bool brcmf_chip_set_active(struct brcmf_chip *pub, u32 rstvec) -@@ -1190,8 +1274,14 @@ bool brcmf_chip_set_active(struct brcmf_ - arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CR4); - if (arm) - return brcmf_chip_cr4_set_active(chip, rstvec); -+ arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CA7); -+ if (arm) -+ return brcmf_chip_ca7_set_active(chip, rstvec); -+ arm = brcmf_chip_get_core(pub, BCMA_CORE_ARM_CM3); -+ if (arm) -+ return brcmf_chip_cm3_set_active(chip); - -- return brcmf_chip_cm3_set_active(chip); -+ return false; - } - - bool brcmf_chip_sr_capable(struct brcmf_chip *pub) ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -55,6 +55,10 @@ enum brcmf_pcie_state { - #define BRCMF_PCIE_43570_NVRAM_NAME "brcm/brcmfmac43570-pcie.txt" - #define BRCMF_PCIE_4358_FW_NAME "brcm/brcmfmac4358-pcie.bin" - #define BRCMF_PCIE_4358_NVRAM_NAME "brcm/brcmfmac4358-pcie.txt" -+#define BRCMF_PCIE_4365_FW_NAME "brcm/brcmfmac4365b-pcie.bin" -+#define BRCMF_PCIE_4365_NVRAM_NAME "brcm/brcmfmac4365b-pcie.txt" -+#define BRCMF_PCIE_4366_FW_NAME "brcm/brcmfmac4366b-pcie.bin" -+#define BRCMF_PCIE_4366_NVRAM_NAME "brcm/brcmfmac4366b-pcie.txt" - - #define BRCMF_PCIE_FW_UP_TIMEOUT 2000 /* msec */ - -@@ -204,6 +208,10 @@ MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME - MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4365_FW_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4365_NVRAM_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4366_FW_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4366_NVRAM_NAME); - - - struct brcmf_pcie_console { -@@ -1440,6 +1448,14 @@ static int brcmf_pcie_get_fwnames(struct - fw_name = BRCMF_PCIE_4358_FW_NAME; - nvram_name = BRCMF_PCIE_4358_NVRAM_NAME; - break; -+ case BRCM_CC_4365_CHIP_ID: -+ fw_name = BRCMF_PCIE_4365_FW_NAME; -+ nvram_name = BRCMF_PCIE_4365_NVRAM_NAME; -+ break; -+ case BRCM_CC_4366_CHIP_ID: -+ fw_name = BRCMF_PCIE_4366_FW_NAME; -+ nvram_name = BRCMF_PCIE_4366_NVRAM_NAME; -+ break; - default: - brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip); - return -ENODEV; -@@ -1973,6 +1989,12 @@ static struct pci_device_id brcmf_pcie_d - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_RAW_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_2G_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4365_5G_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_2G_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_5G_DEVICE_ID), - { /* end: all zeroes */ } - }; - ---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -@@ -48,6 +48,8 @@ - #define BRCM_CC_43570_CHIP_ID 43570 - #define BRCM_CC_4358_CHIP_ID 0x4358 - #define BRCM_CC_43602_CHIP_ID 43602 -+#define BRCM_CC_4365_CHIP_ID 0x4365 -+#define BRCM_CC_4366_CHIP_ID 0x4366 - - /* USB Device IDs */ - #define BRCM_USB_43143_DEVICE_ID 0xbd1e -@@ -67,6 +69,13 @@ - #define BRCM_PCIE_43602_2G_DEVICE_ID 0x43bb - #define BRCM_PCIE_43602_5G_DEVICE_ID 0x43bc - #define BRCM_PCIE_43602_RAW_DEVICE_ID 43602 -+#define BRCM_PCIE_4365_DEVICE_ID 0x43ca -+#define BRCM_PCIE_4365_2G_DEVICE_ID 0x43cb -+#define BRCM_PCIE_4365_5G_DEVICE_ID 0x43cc -+#define BRCM_PCIE_4366_DEVICE_ID 0x43c3 -+#define BRCM_PCIE_4366_2G_DEVICE_ID 0x43c4 -+#define BRCM_PCIE_4366_5G_DEVICE_ID 0x43c5 -+ - - /* brcmsmac IDs */ - #define BCM4313_D11N2G_ID 0x4727 /* 4313 802.11n 2.4G device */ diff --git a/package/kernel/mac80211/patches/370-0015-brcmfmac-Fix-TDLS-setup-by-properly-handling-p2p-noi.patch b/package/kernel/mac80211/patches/370-0015-brcmfmac-Fix-TDLS-setup-by-properly-handling-p2p-noi.patch deleted file mode 100644 index d33c803ab5..0000000000 --- a/package/kernel/mac80211/patches/370-0015-brcmfmac-Fix-TDLS-setup-by-properly-handling-p2p-noi.patch +++ /dev/null @@ -1,120 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:18 +0200 -Subject: [PATCH] brcmfmac: Fix TDLS setup by properly handling p2p noif. - -There is a workaround needed for p2p device setup which breaks tdls -functionality. This patch fixes that by properly signalling fweh that -p2p device setup is ongoing. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -@@ -188,11 +188,13 @@ static void brcmf_fweh_handle_if_event(s - - /* The P2P Device interface event must not be ignored contrary to what - * firmware tells us. Older firmware uses p2p noif, with sta role. -- * This should be accepted. -+ * This should be accepted when p2pdev_setup is ongoing. TDLS setup will -+ * use the same ifevent and should be ignored. - */ - is_p2pdev = ((ifevent->flags & BRCMF_E_IF_FLAG_NOIF) && - (ifevent->role == BRCMF_E_IF_ROLE_P2P_CLIENT || -- ifevent->role == BRCMF_E_IF_ROLE_STA)); -+ ((ifevent->role == BRCMF_E_IF_ROLE_STA) && -+ (drvr->fweh.p2pdev_setup_ongoing)))); - if (!is_p2pdev && (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) { - brcmf_dbg(EVENT, "event can be ignored\n"); - return; -@@ -316,6 +318,17 @@ event_free: - } - - /** -+ * brcmf_fweh_p2pdev_setup() - P2P device setup ongoing (or not). -+ * -+ * @ifp: ifp on which setup is taking place or finished. -+ * @ongoing: p2p device setup in progress (or not). -+ */ -+void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing) -+{ -+ ifp->drvr->fweh.p2pdev_setup_ongoing = ongoing; -+} -+ -+/** - * brcmf_fweh_attach() - initialize firmware event handling. - * - * @drvr: driver information object. ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h -@@ -230,12 +230,14 @@ typedef int (*brcmf_fweh_handler_t)(stru - /** - * struct brcmf_fweh_info - firmware event handling information. - * -+ * @p2pdev_setup_ongoing: P2P device creation in progress. - * @event_work: event worker. - * @evt_q_lock: lock for event queue protection. - * @event_q: event queue. - * @evt_handler: registered event handlers. - */ - struct brcmf_fweh_info { -+ bool p2pdev_setup_ongoing; - struct work_struct event_work; - spinlock_t evt_q_lock; - struct list_head event_q; -@@ -255,6 +257,7 @@ void brcmf_fweh_unregister(struct brcmf_ - int brcmf_fweh_activate_events(struct brcmf_if *ifp); - void brcmf_fweh_process_event(struct brcmf_pub *drvr, - struct brcmf_event *event_packet); -+void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing); - - static inline void brcmf_fweh_process_skb(struct brcmf_pub *drvr, - struct sk_buff *skb) ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2084,11 +2084,13 @@ static struct wireless_dev *brcmf_p2p_cr - brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); - - brcmf_cfg80211_arm_vif_event(p2p->cfg, p2p_vif); -+ brcmf_fweh_p2pdev_setup(pri_ifp, true); - - /* Initialize P2P Discovery in the firmware */ - err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); - if (err < 0) { - brcmf_err("set p2p_disc error\n"); -+ brcmf_fweh_p2pdev_setup(pri_ifp, false); - brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL); - goto fail; - } -@@ -2097,6 +2099,7 @@ static struct wireless_dev *brcmf_p2p_cr - err = brcmf_cfg80211_wait_vif_event_timeout(p2p->cfg, BRCMF_E_IF_ADD, - msecs_to_jiffies(1500)); - brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL); -+ brcmf_fweh_p2pdev_setup(pri_ifp, false); - if (!err) { - brcmf_err("timeout occurred\n"); - err = -EIO; -@@ -2393,6 +2396,8 @@ s32 brcmf_p2p_attach(struct brcmf_cfg802 - memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN); - brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); - -+ brcmf_fweh_p2pdev_setup(pri_ifp, true); -+ - /* Initialize P2P Discovery in the firmware */ - err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); - if (err < 0) { -@@ -2419,8 +2424,9 @@ s32 brcmf_p2p_attach(struct brcmf_cfg802 - INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); - init_completion(&p2p->afx_hdl.act_frm_scan); - init_completion(&p2p->wait_next_af); -- } - exit: -+ brcmf_fweh_p2pdev_setup(pri_ifp, false); -+ } - return err; - } - diff --git a/package/kernel/mac80211/patches/370-0016-brcmfmac-Accept-events-when-TDLS-is-used-in-combinat.patch b/package/kernel/mac80211/patches/370-0016-brcmfmac-Accept-events-when-TDLS-is-used-in-combinat.patch deleted file mode 100644 index b880078835..0000000000 --- a/package/kernel/mac80211/patches/370-0016-brcmfmac-Accept-events-when-TDLS-is-used-in-combinat.patch +++ /dev/null @@ -1,29 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Fri, 18 Sep 2015 22:08:19 +0200 -Subject: [PATCH] brcmfmac: Accept events when TDLS is used in combination with - p2p. - -TDLS events are mapped back to primary interface but when p2p is in -use then this fails because the check was incorrect by checking -bsscfg number. Which can be different when a p2p device has been -created. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -@@ -300,8 +300,7 @@ static void brcmf_fweh_event_worker(stru - goto event_free; - } - -- if ((event->code == BRCMF_E_TDLS_PEER_EVENT) && -- (emsg.bsscfgidx == 1)) -+ if (event->code == BRCMF_E_TDLS_PEER_EVENT) - ifp = drvr->iflist[0]; - else - ifp = drvr->iflist[emsg.bsscfgidx]; diff --git a/package/kernel/mac80211/patches/371-brcmfmac-include-linux-atomic.h.patch b/package/kernel/mac80211/patches/371-brcmfmac-include-linux-atomic.h.patch deleted file mode 100644 index 9311a9dbe4..0000000000 --- a/package/kernel/mac80211/patches/371-brcmfmac-include-linux-atomic.h.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 19 Sep 2015 12:47:20 +0200 -Subject: [PATCH] brcmfmac: include linux/atomic.h - -brcmfmac uses atomic_or() and other atomic_* functions, but does not -include linux/atomic.h. This file gets included by some other header -file so this normally does not cause problems. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -Acked-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -15,6 +15,7 @@ - */ - - #include <linux/types.h> -+#include <linux/atomic.h> - #include <linux/kernel.h> - #include <linux/kthread.h> - #include <linux/printk.h> diff --git a/package/kernel/mac80211/patches/372-0001-brcmfmac-expose-device-memory-to-devcoredump-subsyst.patch b/package/kernel/mac80211/patches/372-0001-brcmfmac-expose-device-memory-to-devcoredump-subsyst.patch deleted file mode 100644 index cf3f278871..0000000000 --- a/package/kernel/mac80211/patches/372-0001-brcmfmac-expose-device-memory-to-devcoredump-subsyst.patch +++ /dev/null @@ -1,347 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:11 +0200 -Subject: [PATCH] brcmfmac: expose device memory to devcoredump subsystem - -Upon PSM watchdog event received from firmware the driver will obtain -a memory snapshot of the device and expose it to user-space through -the devcoredump framework. This will trigger a uevent. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/Kconfig -+++ b/drivers/net/wireless/brcm80211/Kconfig -@@ -85,5 +85,6 @@ config BRCM_TRACING - config BRCMDBG - bool "Broadcom driver debug functions" - depends on BRCMSMAC || BRCMFMAC -+ select WANT_DEV_COREDUMP - ---help--- - Selecting this enables additional code for debug purposes. ---- a/drivers/net/wireless/brcm80211/brcmfmac/bus.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bus.h -@@ -65,6 +65,8 @@ struct brcmf_bus_dcmd { - * @rxctl: receive a control response message from dongle. - * @gettxq: obtain a reference of bus transmit queue (optional). - * @wowl_config: specify if dongle is configured for wowl when going to suspend -+ * @get_ramsize: obtain size of device memory. -+ * @get_memdump: obtain device memory dump in provided buffer. - * - * This structure provides an abstract interface towards the - * bus specific driver. For control messages to common driver -@@ -79,6 +81,8 @@ struct brcmf_bus_ops { - int (*rxctl)(struct device *dev, unsigned char *msg, uint len); - struct pktq * (*gettxq)(struct device *dev); - void (*wowl_config)(struct device *dev, bool enabled); -+ size_t (*get_ramsize)(struct device *dev); -+ int (*get_memdump)(struct device *dev, void *data, size_t len); - }; - - -@@ -185,6 +189,23 @@ void brcmf_bus_wowl_config(struct brcmf_ - bus->ops->wowl_config(bus->dev, enabled); - } - -+static inline size_t brcmf_bus_get_ramsize(struct brcmf_bus *bus) -+{ -+ if (!bus->ops->get_ramsize) -+ return 0; -+ -+ return bus->ops->get_ramsize(bus->dev); -+} -+ -+static inline -+int brcmf_bus_get_memdump(struct brcmf_bus *bus, void *data, size_t len) -+{ -+ if (!bus->ops->get_memdump) -+ return -EOPNOTSUPP; -+ -+ return bus->ops->get_memdump(bus->dev, data, len); -+} -+ - /* - * interface functions from common layer - */ ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -957,8 +957,8 @@ int brcmf_attach(struct device *dev) - drvr->bus_if = dev_get_drvdata(dev); - drvr->bus_if->drvr = drvr; - -- /* create device debugfs folder */ -- brcmf_debugfs_attach(drvr); -+ /* attach debug facilities */ -+ brcmf_debug_attach(drvr); - - /* Attach and link in the protocol */ - ret = brcmf_proto_attach(drvr); -@@ -1155,7 +1155,7 @@ void brcmf_detach(struct device *dev) - - brcmf_proto_detach(drvr); - -- brcmf_debugfs_detach(drvr); -+ brcmf_debug_detach(drvr); - bus_if->drvr = NULL; - kfree(drvr); - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c -@@ -16,15 +16,45 @@ - #include <linux/debugfs.h> - #include <linux/netdevice.h> - #include <linux/module.h> -+#include <linux/devcoredump.h> - - #include <brcmu_wifi.h> - #include <brcmu_utils.h> - #include "core.h" - #include "bus.h" -+#include "fweh.h" - #include "debug.h" - - static struct dentry *root_folder; - -+static int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data, -+ size_t len) -+{ -+ void *dump; -+ size_t ramsize; -+ -+ ramsize = brcmf_bus_get_ramsize(bus); -+ if (ramsize) { -+ dump = vzalloc(len + ramsize); -+ if (!dump) -+ return -ENOMEM; -+ memcpy(dump, data, len); -+ brcmf_bus_get_memdump(bus, dump + len, ramsize); -+ dev_coredumpv(bus->dev, dump, len + ramsize, GFP_KERNEL); -+ } -+ return 0; -+} -+ -+static int brcmf_debug_psm_watchdog_notify(struct brcmf_if *ifp, -+ const struct brcmf_event_msg *evtmsg, -+ void *data) -+{ -+ brcmf_dbg(TRACE, "enter: idx=%d\n", ifp->bssidx); -+ -+ return brcmf_debug_create_memdump(ifp->drvr->bus_if, data, -+ evtmsg->datalen); -+} -+ - void brcmf_debugfs_init(void) - { - root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL); -@@ -41,7 +71,7 @@ void brcmf_debugfs_exit(void) - root_folder = NULL; - } - --int brcmf_debugfs_attach(struct brcmf_pub *drvr) -+int brcmf_debug_attach(struct brcmf_pub *drvr) - { - struct device *dev = drvr->bus_if->dev; - -@@ -49,12 +79,18 @@ int brcmf_debugfs_attach(struct brcmf_pu - return -ENODEV; - - drvr->dbgfs_dir = debugfs_create_dir(dev_name(dev), root_folder); -+ if (IS_ERR(drvr->dbgfs_dir)) -+ return PTR_ERR(drvr->dbgfs_dir); - -- return PTR_ERR_OR_ZERO(drvr->dbgfs_dir); -+ -+ return brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG, -+ brcmf_debug_psm_watchdog_notify); - } - --void brcmf_debugfs_detach(struct brcmf_pub *drvr) -+void brcmf_debug_detach(struct brcmf_pub *drvr) - { -+ brcmf_fweh_unregister(drvr, BRCMF_E_PSM_WATCHDOG); -+ - if (!IS_ERR_OR_NULL(drvr->dbgfs_dir)) - debugfs_remove_recursive(drvr->dbgfs_dir); - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h -@@ -109,8 +109,8 @@ struct brcmf_pub; - #ifdef DEBUG - void brcmf_debugfs_init(void); - void brcmf_debugfs_exit(void); --int brcmf_debugfs_attach(struct brcmf_pub *drvr); --void brcmf_debugfs_detach(struct brcmf_pub *drvr); -+int brcmf_debug_attach(struct brcmf_pub *drvr); -+void brcmf_debug_detach(struct brcmf_pub *drvr); - struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr); - int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn, - int (*read_fn)(struct seq_file *seq, void *data)); -@@ -121,11 +121,11 @@ static inline void brcmf_debugfs_init(vo - static inline void brcmf_debugfs_exit(void) - { - } --static inline int brcmf_debugfs_attach(struct brcmf_pub *drvr) -+static inline int brcmf_debug_attach(struct brcmf_pub *drvr) - { - return 0; - } --static inline void brcmf_debugfs_detach(struct brcmf_pub *drvr) -+static inline void brcmf_debug_detach(struct brcmf_pub *drvr) - { - } - static inline ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -448,6 +448,47 @@ brcmf_pcie_copy_mem_todev(struct brcmf_p - } - - -+static void -+brcmf_pcie_copy_dev_tomem(struct brcmf_pciedev_info *devinfo, u32 mem_offset, -+ void *dstaddr, u32 len) -+{ -+ void __iomem *address = devinfo->tcm + mem_offset; -+ __le32 *dst32; -+ __le16 *dst16; -+ u8 *dst8; -+ -+ if (((ulong)address & 4) || ((ulong)dstaddr & 4) || (len & 4)) { -+ if (((ulong)address & 2) || ((ulong)dstaddr & 2) || (len & 2)) { -+ dst8 = (u8 *)dstaddr; -+ while (len) { -+ *dst8 = ioread8(address); -+ address++; -+ dst8++; -+ len--; -+ } -+ } else { -+ len = len / 2; -+ dst16 = (__le16 *)dstaddr; -+ while (len) { -+ *dst16 = cpu_to_le16(ioread16(address)); -+ address += 2; -+ dst16++; -+ len--; -+ } -+ } -+ } else { -+ len = len / 4; -+ dst32 = (__le32 *)dstaddr; -+ while (len) { -+ *dst32 = cpu_to_le32(ioread32(address)); -+ address += 4; -+ dst32++; -+ len--; -+ } -+ } -+} -+ -+ - #define WRITECC32(devinfo, reg, value) brcmf_pcie_write_reg32(devinfo, \ - CHIPCREGOFFS(reg), value) - -@@ -1352,12 +1393,36 @@ static void brcmf_pcie_wowl_config(struc - } - - -+static size_t brcmf_pcie_get_ramsize(struct device *dev) -+{ -+ struct brcmf_bus *bus_if = dev_get_drvdata(dev); -+ struct brcmf_pciedev *buspub = bus_if->bus_priv.pcie; -+ struct brcmf_pciedev_info *devinfo = buspub->devinfo; -+ -+ return devinfo->ci->ramsize - devinfo->ci->srsize; -+} -+ -+ -+static int brcmf_pcie_get_memdump(struct device *dev, void *data, size_t len) -+{ -+ struct brcmf_bus *bus_if = dev_get_drvdata(dev); -+ struct brcmf_pciedev *buspub = bus_if->bus_priv.pcie; -+ struct brcmf_pciedev_info *devinfo = buspub->devinfo; -+ -+ brcmf_dbg(PCIE, "dump at 0x%08X: len=%zu\n", devinfo->ci->rambase, len); -+ brcmf_pcie_copy_dev_tomem(devinfo, devinfo->ci->rambase, data, len); -+ return 0; -+} -+ -+ - static struct brcmf_bus_ops brcmf_pcie_bus_ops = { - .txdata = brcmf_pcie_tx, - .stop = brcmf_pcie_down, - .txctl = brcmf_pcie_tx_ctlpkt, - .rxctl = brcmf_pcie_rx_ctlpkt, - .wowl_config = brcmf_pcie_wowl_config, -+ .get_ramsize = brcmf_pcie_get_ramsize, -+ .get_memdump = brcmf_pcie_get_memdump, - }; - - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -3539,6 +3539,51 @@ done: - return err; - } - -+static size_t brcmf_sdio_bus_get_ramsize(struct device *dev) -+{ -+ struct brcmf_bus *bus_if = dev_get_drvdata(dev); -+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; -+ struct brcmf_sdio *bus = sdiodev->bus; -+ -+ return bus->ci->ramsize - bus->ci->srsize; -+} -+ -+static int brcmf_sdio_bus_get_memdump(struct device *dev, void *data, -+ size_t mem_size) -+{ -+ struct brcmf_bus *bus_if = dev_get_drvdata(dev); -+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; -+ struct brcmf_sdio *bus = sdiodev->bus; -+ int err; -+ int address; -+ int offset; -+ int len; -+ -+ brcmf_dbg(INFO, "dump at 0x%08x: size=%zu\n", bus->ci->rambase, -+ mem_size); -+ -+ address = bus->ci->rambase; -+ offset = err = 0; -+ sdio_claim_host(sdiodev->func[1]); -+ while (offset < mem_size) { -+ len = ((offset + MEMBLOCK) < mem_size) ? MEMBLOCK : -+ mem_size - offset; -+ err = brcmf_sdiod_ramrw(sdiodev, false, address, data, len); -+ if (err) { -+ brcmf_err("error %d on reading %d membytes at 0x%08x\n", -+ err, len, address); -+ goto done; -+ } -+ data += len; -+ offset += len; -+ address += len; -+ } -+ -+done: -+ sdio_release_host(sdiodev->func[1]); -+ return err; -+} -+ - void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus) - { - if (!bus->dpc_triggered) { -@@ -3987,7 +4032,9 @@ static struct brcmf_bus_ops brcmf_sdio_b - .txctl = brcmf_sdio_bus_txctl, - .rxctl = brcmf_sdio_bus_rxctl, - .gettxq = brcmf_sdio_bus_gettxq, -- .wowl_config = brcmf_sdio_wowl_config -+ .wowl_config = brcmf_sdio_wowl_config, -+ .get_ramsize = brcmf_sdio_bus_get_ramsize, -+ .get_memdump = brcmf_sdio_bus_get_memdump, - }; - - static void brcmf_sdio_firmware_callback(struct device *dev, diff --git a/package/kernel/mac80211/patches/372-0002-brcmfmac-Fix-race-condition-between-USB-probe-load-a.patch b/package/kernel/mac80211/patches/372-0002-brcmfmac-Fix-race-condition-between-USB-probe-load-a.patch deleted file mode 100644 index 5b82bcac9a..0000000000 --- a/package/kernel/mac80211/patches/372-0002-brcmfmac-Fix-race-condition-between-USB-probe-load-a.patch +++ /dev/null @@ -1,108 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:12 +0200 -Subject: [PATCH] brcmfmac: Fix race condition between USB probe/load and - disconnect. - -When a USB device gets disconnected due to for example removal -then it is possible that it is still in the loading phase due to -the asynchronous load routines. These routines can then possible -access memory which has been freed. Fix this by mutex locking the -device init phase. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c -@@ -144,6 +144,7 @@ struct brcmf_usbdev_info { - - struct usb_device *usbdev; - struct device *dev; -+ struct mutex dev_init_lock; - - int ctl_in_pipe, ctl_out_pipe; - struct urb *ctl_urb; /* URB for control endpoint */ -@@ -1204,6 +1205,8 @@ static void brcmf_usb_probe_phase2(struc - int ret; - - brcmf_dbg(USB, "Start fw downloading\n"); -+ -+ devinfo = bus->bus_priv.usb->devinfo; - ret = check_file(fw->data); - if (ret < 0) { - brcmf_err("invalid firmware\n"); -@@ -1211,7 +1214,6 @@ static void brcmf_usb_probe_phase2(struc - goto error; - } - -- devinfo = bus->bus_priv.usb->devinfo; - devinfo->image = fw->data; - devinfo->image_len = fw->size; - -@@ -1224,9 +1226,11 @@ static void brcmf_usb_probe_phase2(struc - if (ret) - goto error; - -+ mutex_unlock(&devinfo->dev_init_lock); - return; - error: - brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret); -+ mutex_unlock(&devinfo->dev_init_lock); - device_release_driver(dev); - } - -@@ -1264,6 +1268,7 @@ static int brcmf_usb_probe_cb(struct brc - if (ret) - goto fail; - /* we are done */ -+ mutex_unlock(&devinfo->dev_init_lock); - return 0; - } - bus->chip = bus_pub->devid; -@@ -1317,6 +1322,12 @@ brcmf_usb_probe(struct usb_interface *in - - devinfo->usbdev = usb; - devinfo->dev = &usb->dev; -+ /* Take an init lock, to protect for disconnect while still loading. -+ * Necessary because of the asynchronous firmware load construction -+ */ -+ mutex_init(&devinfo->dev_init_lock); -+ mutex_lock(&devinfo->dev_init_lock); -+ - usb_set_intfdata(intf, devinfo); - - /* Check that the device supports only one configuration */ -@@ -1391,6 +1402,7 @@ brcmf_usb_probe(struct usb_interface *in - return 0; - - fail: -+ mutex_unlock(&devinfo->dev_init_lock); - kfree(devinfo); - usb_set_intfdata(intf, NULL); - return ret; -@@ -1403,8 +1415,19 @@ brcmf_usb_disconnect(struct usb_interfac - - brcmf_dbg(USB, "Enter\n"); - devinfo = (struct brcmf_usbdev_info *)usb_get_intfdata(intf); -- brcmf_usb_disconnect_cb(devinfo); -- kfree(devinfo); -+ -+ if (devinfo) { -+ mutex_lock(&devinfo->dev_init_lock); -+ /* Make sure that devinfo still exists. Firmware probe routines -+ * may have released the device and cleared the intfdata. -+ */ -+ if (!usb_get_intfdata(intf)) -+ goto done; -+ -+ brcmf_usb_disconnect_cb(devinfo); -+ kfree(devinfo); -+ } -+done: - brcmf_dbg(USB, "Exit\n"); - } - diff --git a/package/kernel/mac80211/patches/372-0003-brcmfmac-rename-firmware_path-to-alternative_fw_path.patch b/package/kernel/mac80211/patches/372-0003-brcmfmac-rename-firmware_path-to-alternative_fw_path.patch deleted file mode 100644 index f877c232a2..0000000000 --- a/package/kernel/mac80211/patches/372-0003-brcmfmac-rename-firmware_path-to-alternative_fw_path.patch +++ /dev/null @@ -1,28 +0,0 @@ -From: Franky Lin <frankyl@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:13 +0200 -Subject: [PATCH] brcmfmac: rename firmware_path to alternative_fw_path - -In brcmfmac the module parameter "firmware_path" is used as an -alternative relative path under the search path used by firmware_class -or ueventhelper. Rename the parameter to alternative_fw_path to avoid -confusion. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Franky Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -28,7 +28,7 @@ - #define BRCMF_FW_NVRAM_PCIEDEV_LEN 10 /* pcie/1/4/ + \0 */ - - char brcmf_firmware_path[BRCMF_FW_PATH_LEN]; --module_param_string(firmware_path, brcmf_firmware_path, -+module_param_string(alternative_fw_path, brcmf_firmware_path, - BRCMF_FW_PATH_LEN, 0440); - - enum nvram_parser_state { diff --git a/package/kernel/mac80211/patches/372-0004-brcmfmac-remove-conversational-comment.patch b/package/kernel/mac80211/patches/372-0004-brcmfmac-remove-conversational-comment.patch deleted file mode 100644 index 0bfd9effc8..0000000000 --- a/package/kernel/mac80211/patches/372-0004-brcmfmac-remove-conversational-comment.patch +++ /dev/null @@ -1,25 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:14 +0200 -Subject: [PATCH] brcmfmac: remove conversational comment - -Removing a comment that was only useful during the review of -the change that introduced it and which should never have been -submitted. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c -@@ -873,9 +873,6 @@ brcmf_msgbuf_process_txstatus(struct brc - commonring = msgbuf->flowrings[flowid]; - atomic_dec(&commonring->outstanding_tx); - -- /* Hante: i believe this was a bug as tx_status->msg.ifidx was used -- * in brcmf_txfinalize as index in drvr->iflist. Can you confirm/deny? -- */ - brcmf_txfinalize(brcmf_get_ifp(msgbuf->drvr, tx_status->msg.ifidx), - skb, true); - } diff --git a/package/kernel/mac80211/patches/372-0005-brcmfmac-Rework-p2p-attach-use-single-method-for-p2p.patch b/package/kernel/mac80211/patches/372-0005-brcmfmac-Rework-p2p-attach-use-single-method-for-p2p.patch deleted file mode 100644 index 3ffada8d56..0000000000 --- a/package/kernel/mac80211/patches/372-0005-brcmfmac-Rework-p2p-attach-use-single-method-for-p2p.patch +++ /dev/null @@ -1,226 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:15 +0200 -Subject: [PATCH] brcmfmac: Rework p2p attach, use single method for p2p dev - creation. - -When module param p2pon is used a p2p device is created at init. -This patch reworks how this is done by using the same method as -for a dynamically (by user space) created p2p device. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -6237,6 +6237,17 @@ struct brcmf_cfg80211_info *brcmf_cfg802 - else - *cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - } -+ /* p2p might require that "if-events" get processed by fweh. So -+ * activate the already registered event handlers now and activate -+ * the rest when initialization has completed. drvr->config needs to -+ * be assigned before activating events. -+ */ -+ drvr->config = cfg; -+ err = brcmf_fweh_activate_events(ifp); -+ if (err) { -+ brcmf_err("FWEH activation failed (%d)\n", err); -+ goto wiphy_unreg_out; -+ } - - err = brcmf_p2p_attach(cfg, p2pdev_forced); - if (err) { -@@ -6259,6 +6270,13 @@ struct brcmf_cfg80211_info *brcmf_cfg802 - brcmf_notify_tdls_peer_event); - } - -+ /* (re-) activate FWEH event handling */ -+ err = brcmf_fweh_activate_events(ifp); -+ if (err) { -+ brcmf_err("FWEH activation failed (%d)\n", err); -+ goto wiphy_unreg_out; -+ } -+ - return cfg; - - wiphy_unreg_out: ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -828,8 +828,8 @@ struct brcmf_if *brcmf_add_if(struct brc - } else { - brcmf_dbg(INFO, "allocate netdev interface\n"); - /* Allocate netdev, including space for private structure */ -- ndev = alloc_netdev(sizeof(*ifp), name, NET_NAME_UNKNOWN, -- ether_setup); -+ ndev = alloc_netdev(sizeof(*ifp), is_p2pdev ? "p2p%d" : name, -+ NET_NAME_UNKNOWN, ether_setup); - if (!ndev) - return ERR_PTR(-ENOMEM); - -@@ -1021,12 +1021,7 @@ int brcmf_bus_start(struct device *dev) - if (IS_ERR(ifp)) - return PTR_ERR(ifp); - -- if (brcmf_p2p_enable) -- p2p_ifp = brcmf_add_if(drvr, 1, 0, false, "p2p%d", NULL); -- else -- p2p_ifp = NULL; -- if (IS_ERR(p2p_ifp)) -- p2p_ifp = NULL; -+ p2p_ifp = NULL; - - /* signal bus ready */ - brcmf_bus_change_state(bus_if, BRCMF_BUS_UP); -@@ -1060,11 +1055,13 @@ int brcmf_bus_start(struct device *dev) - goto fail; - } - -- ret = brcmf_fweh_activate_events(ifp); -- if (ret < 0) -- goto fail; -- - ret = brcmf_net_attach(ifp, false); -+ -+ if ((!ret) && (brcmf_p2p_enable)) { -+ p2p_ifp = drvr->iflist[1]; -+ if (p2p_ifp) -+ ret = brcmf_net_p2p_attach(p2p_ifp); -+ } - fail: - if (ret < 0) { - brcmf_err("failed: %d\n", ret); -@@ -1076,20 +1073,12 @@ fail: - brcmf_fws_del_interface(ifp); - brcmf_fws_deinit(drvr); - } -- if (drvr->iflist[0]) { -+ if (ifp) - brcmf_net_detach(ifp->ndev); -- drvr->iflist[0] = NULL; -- } -- if (p2p_ifp) { -+ if (p2p_ifp) - brcmf_net_detach(p2p_ifp->ndev); -- drvr->iflist[1] = NULL; -- } - return ret; - } -- if ((brcmf_p2p_enable) && (p2p_ifp)) -- if (brcmf_net_p2p_attach(p2p_ifp) < 0) -- brcmf_p2p_enable = 0; -- - return 0; - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -@@ -213,7 +213,8 @@ static void brcmf_fweh_handle_if_event(s - is_p2pdev, emsg->ifname, emsg->addr); - if (IS_ERR(ifp)) - return; -- brcmf_fws_add_interface(ifp); -+ if (!is_p2pdev) -+ brcmf_fws_add_interface(ifp); - if (!drvr->fweh.evt_handler[BRCMF_E_IF]) - if (brcmf_net_attach(ifp, false) < 0) - return; ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2350,83 +2350,30 @@ void brcmf_p2p_stop_device(struct wiphy - * brcmf_p2p_attach() - attach for P2P. - * - * @cfg: driver private data for cfg80211 interface. -+ * @p2pdev_forced: create p2p device interface at attach. - */ - s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced) - { -- struct brcmf_if *pri_ifp; -- struct brcmf_if *p2p_ifp; -- struct brcmf_cfg80211_vif *p2p_vif; - struct brcmf_p2p_info *p2p; -- struct brcmf_pub *drvr; -- s32 bssidx; -+ struct brcmf_if *pri_ifp; - s32 err = 0; -+ void *err_ptr; - - p2p = &cfg->p2p; - p2p->cfg = cfg; - -- drvr = cfg->pub; -- -- pri_ifp = brcmf_get_ifp(drvr, 0); -+ pri_ifp = brcmf_get_ifp(cfg->pub, 0); - p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif = pri_ifp->vif; - - if (p2pdev_forced) { -- p2p_ifp = drvr->iflist[1]; -+ err_ptr = brcmf_p2p_create_p2pdev(p2p, NULL, NULL); -+ if (IS_ERR(err_ptr)) { -+ brcmf_err("P2P device creation failed.\n"); -+ err = PTR_ERR(err_ptr); -+ } - } else { -- p2p_ifp = NULL; - p2p->p2pdev_dynamically = true; - } -- if (p2p_ifp) { -- p2p_vif = brcmf_alloc_vif(cfg, NL80211_IFTYPE_P2P_DEVICE, -- false); -- if (IS_ERR(p2p_vif)) { -- brcmf_err("could not create discovery vif\n"); -- err = -ENOMEM; -- goto exit; -- } -- -- p2p_vif->ifp = p2p_ifp; -- p2p_ifp->vif = p2p_vif; -- p2p_vif->wdev.netdev = p2p_ifp->ndev; -- p2p_ifp->ndev->ieee80211_ptr = &p2p_vif->wdev; -- SET_NETDEV_DEV(p2p_ifp->ndev, wiphy_dev(cfg->wiphy)); -- -- p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = p2p_vif; -- -- brcmf_p2p_generate_bss_mac(p2p, NULL); -- memcpy(p2p_ifp->mac_addr, p2p->dev_addr, ETH_ALEN); -- brcmf_p2p_set_firmware(pri_ifp, p2p->dev_addr); -- -- brcmf_fweh_p2pdev_setup(pri_ifp, true); -- -- /* Initialize P2P Discovery in the firmware */ -- err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); -- if (err < 0) { -- brcmf_err("set p2p_disc error\n"); -- brcmf_free_vif(p2p_vif); -- goto exit; -- } -- /* obtain bsscfg index for P2P discovery */ -- err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); -- if (err < 0) { -- brcmf_err("retrieving discover bsscfg index failed\n"); -- brcmf_free_vif(p2p_vif); -- goto exit; -- } -- /* Verify that firmware uses same bssidx as driver !! */ -- if (p2p_ifp->bssidx != bssidx) { -- brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", -- bssidx, p2p_ifp->bssidx); -- brcmf_free_vif(p2p_vif); -- goto exit; -- } -- -- init_completion(&p2p->send_af_done); -- INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); -- init_completion(&p2p->afx_hdl.act_frm_scan); -- init_completion(&p2p->wait_next_af); --exit: -- brcmf_fweh_p2pdev_setup(pri_ifp, false); -- } - return err; - } - diff --git a/package/kernel/mac80211/patches/372-0006-brcmfmac-Fix-station-info-rate-information.patch b/package/kernel/mac80211/patches/372-0006-brcmfmac-Fix-station-info-rate-information.patch deleted file mode 100644 index 0abcf1eef4..0000000000 --- a/package/kernel/mac80211/patches/372-0006-brcmfmac-Fix-station-info-rate-information.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:16 +0200 -Subject: [PATCH] brcmfmac: Fix station info rate information. - -Txrate and rxrate in get_station got assigned first with value -in kbps and then divided by 100 to get it in 100kbps unit. The -problem with that is that type of rate is u16 which resulted -in incorrect values for high data rate values. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -2477,13 +2477,13 @@ brcmf_cfg80211_get_station(struct wiphy - sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts); - if (sinfo->tx_packets) { - sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE); -- sinfo->txrate.legacy = le32_to_cpu(sta_info_le.tx_rate); -- sinfo->txrate.legacy /= 100; -+ sinfo->txrate.legacy = -+ le32_to_cpu(sta_info_le.tx_rate) / 100; - } - if (sinfo->rx_packets) { - sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE); -- sinfo->rxrate.legacy = le32_to_cpu(sta_info_le.rx_rate); -- sinfo->rxrate.legacy /= 100; -+ sinfo->rxrate.legacy = -+ le32_to_cpu(sta_info_le.rx_rate) / 100; - } - if (le16_to_cpu(sta_info_le.ver) >= 4) { - sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES); diff --git a/package/kernel/mac80211/patches/372-0007-brcmfmac-Add-RSSI-information-to-get_station.patch b/package/kernel/mac80211/patches/372-0007-brcmfmac-Add-RSSI-information-to-get_station.patch deleted file mode 100644 index bb03d679df..0000000000 --- a/package/kernel/mac80211/patches/372-0007-brcmfmac-Add-RSSI-information-to-get_station.patch +++ /dev/null @@ -1,50 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:17 +0200 -Subject: [PATCH] brcmfmac: Add RSSI information to get_station. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -2431,6 +2431,9 @@ brcmf_cfg80211_get_station(struct wiphy - struct brcmf_sta_info_le sta_info_le; - u32 sta_flags; - u32 is_tdls_peer; -+ s32 total_rssi; -+ s32 count_rssi; -+ u32 i; - - brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac); - if (!check_vif_up(ifp->vif)) -@@ -2491,6 +2494,26 @@ brcmf_cfg80211_get_station(struct wiphy - sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES); - sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes); - } -+ total_rssi = 0; -+ count_rssi = 0; -+ for (i = 0; i < BRCMF_ANT_MAX; i++) { -+ if (sta_info_le.rssi[i]) { -+ sinfo->chain_signal_avg[count_rssi] = -+ sta_info_le.rssi[i]; -+ sinfo->chain_signal[count_rssi] = -+ sta_info_le.rssi[i]; -+ total_rssi += sta_info_le.rssi[i]; -+ count_rssi++; -+ } -+ } -+ if (count_rssi) { -+ sinfo->filled |= BIT(NL80211_STA_INFO_CHAIN_SIGNAL); -+ sinfo->chains = count_rssi; -+ -+ sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); -+ total_rssi /= count_rssi; -+ sinfo->signal = total_rssi; -+ } - } - done: - brcmf_dbg(TRACE, "Exit\n"); diff --git a/package/kernel/mac80211/patches/372-0008-brcmfmac-Add-dump_station-support-to-cfg80221-ops.patch b/package/kernel/mac80211/patches/372-0008-brcmfmac-Add-dump_station-support-to-cfg80221-ops.patch deleted file mode 100644 index a6bafd2497..0000000000 --- a/package/kernel/mac80211/patches/372-0008-brcmfmac-Add-dump_station-support-to-cfg80221-ops.patch +++ /dev/null @@ -1,107 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:18 +0200 -Subject: [PATCH] brcmfmac: Add dump_station support to cfg80221 ops. - -With this feature it becomes possible to request a station -assoc list. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -2520,6 +2520,35 @@ done: - return err; - } - -+static int -+brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev, -+ int idx, u8 *mac, struct station_info *sinfo) -+{ -+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); -+ struct brcmf_if *ifp = netdev_priv(ndev); -+ s32 err; -+ -+ brcmf_dbg(TRACE, "Enter, idx %d\n", idx); -+ -+ if (idx == 0) { -+ cfg->assoclist.count = cpu_to_le32(BRCMF_MAX_ASSOCLIST); -+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_ASSOCLIST, -+ &cfg->assoclist, -+ sizeof(cfg->assoclist)); -+ if (err) { -+ brcmf_err("BRCMF_C_GET_ASSOCLIST unsupported, err=%d\n", -+ err); -+ cfg->assoclist.count = 0; -+ return -EOPNOTSUPP; -+ } -+ } -+ if (idx < le32_to_cpu(cfg->assoclist.count)) { -+ memcpy(mac, cfg->assoclist.mac[idx], ETH_ALEN); -+ return brcmf_cfg80211_get_station(wiphy, ndev, mac, sinfo); -+ } -+ return -ENOENT; -+} -+ - static s32 - brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev, - bool enabled, s32 timeout) -@@ -4619,6 +4648,7 @@ static struct cfg80211_ops wl_cfg80211_o - .join_ibss = brcmf_cfg80211_join_ibss, - .leave_ibss = brcmf_cfg80211_leave_ibss, - .get_station = brcmf_cfg80211_get_station, -+ .dump_station = brcmf_cfg80211_dump_station, - .set_tx_power = brcmf_cfg80211_set_tx_power, - .get_tx_power = brcmf_cfg80211_get_tx_power, - .add_key = brcmf_cfg80211_add_key, ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -@@ -407,6 +407,7 @@ struct brcmf_cfg80211_info { - struct brcmu_d11inf d11inf; - bool wowl_enabled; - u32 pre_wowl_pmmode; -+ struct brcmf_assoclist_le assoclist; - }; - - /** ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h -@@ -72,6 +72,7 @@ - #define BRCMF_C_GET_BSS_INFO 136 - #define BRCMF_C_GET_BANDLIST 140 - #define BRCMF_C_SET_SCB_TIMEOUT 158 -+#define BRCMF_C_GET_ASSOCLIST 159 - #define BRCMF_C_GET_PHYLIST 180 - #define BRCMF_C_SET_SCAN_CHANNEL_TIME 185 - #define BRCMF_C_SET_SCAN_UNASSOC_TIME 187 ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -@@ -119,6 +119,8 @@ - #define BRCMF_COUNTRY_BUF_SZ 4 - #define BRCMF_ANT_MAX 4 - -+#define BRCMF_MAX_ASSOCLIST 128 -+ - /* join preference types for join_pref iovar */ - enum brcmf_join_pref_types { - BRCMF_JOIN_PREF_RSSI = 1, -@@ -621,4 +623,15 @@ struct brcmf_rev_info_le { - __le32 nvramrev; - }; - -+/** -+ * struct brcmf_assoclist_le - request assoc list. -+ * -+ * @count: indicates number of stations. -+ * @mac: MAC addresses of stations. -+ */ -+struct brcmf_assoclist_le { -+ __le32 count; -+ u8 mac[BRCMF_MAX_ASSOCLIST][ETH_ALEN]; -+}; -+ - #endif /* FWIL_TYPES_H_ */ diff --git a/package/kernel/mac80211/patches/372-0009-brcmfmac-Move-brcmf_c_preinit_dcmds-prototype-to-cor.patch b/package/kernel/mac80211/patches/372-0009-brcmfmac-Move-brcmf_c_preinit_dcmds-prototype-to-cor.patch deleted file mode 100644 index dc549040ec..0000000000 --- a/package/kernel/mac80211/patches/372-0009-brcmfmac-Move-brcmf_c_preinit_dcmds-prototype-to-cor.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:19 +0200 -Subject: [PATCH] brcmfmac: Move brcmf_c_preinit_dcmds prototype to correct - file. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/common.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/common.h -@@ -17,4 +17,7 @@ - - extern const u8 ALLFFMAC[ETH_ALEN]; - -+/* Sets dongle media info (drv_version, mac address). */ -+int brcmf_c_preinit_dcmds(struct brcmf_if *ifp); -+ - #endif /* BRCMFMAC_COMMON_H */ ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -33,6 +33,7 @@ - #include "feature.h" - #include "proto.h" - #include "pcie.h" -+#include "common.h" - - MODULE_AUTHOR("Broadcom Corporation"); - MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver."); ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -214,7 +214,4 @@ void brcmf_txflowblock_if(struct brcmf_i - void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success); - void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb); - --/* Sets dongle media info (drv_version, mac address). */ --int brcmf_c_preinit_dcmds(struct brcmf_if *ifp); -- - #endif /* BRCMFMAC_CORE_H */ diff --git a/package/kernel/mac80211/patches/372-0010-brcmfmac-Remove-unused-state-AP-creating.patch b/package/kernel/mac80211/patches/372-0010-brcmfmac-Remove-unused-state-AP-creating.patch deleted file mode 100644 index c6a7363aa6..0000000000 --- a/package/kernel/mac80211/patches/372-0010-brcmfmac-Remove-unused-state-AP-creating.patch +++ /dev/null @@ -1,55 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:20 +0200 -Subject: [PATCH] brcmfmac: Remove unused state AP creating. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -839,7 +839,6 @@ brcmf_cfg80211_change_iface(struct wiphy - err = brcmf_p2p_ifchange(cfg, BRCMF_FIL_P2P_IF_GO); - } - if (!err) { -- set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state); - brcmf_dbg(INFO, "IF Type = AP\n"); - } - } else { -@@ -4250,7 +4249,6 @@ brcmf_cfg80211_start_ap(struct wiphy *wi - - brcmf_dbg(TRACE, "GO mode configuration complete\n"); - } -- clear_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); - set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); - - exit: -@@ -4315,7 +4313,6 @@ static int brcmf_cfg80211_stop_ap(struct - } - brcmf_set_mpc(ifp, 1); - brcmf_configure_arp_offload(ifp, true); -- set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); - clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); - - return err; ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -@@ -143,7 +143,6 @@ struct brcmf_cfg80211_profile { - * @BRCMF_VIF_STATUS_CONNECTING: connect/join in progress. - * @BRCMF_VIF_STATUS_CONNECTED: connected/joined succesfully. - * @BRCMF_VIF_STATUS_DISCONNECTING: disconnect/disable in progress. -- * @BRCMF_VIF_STATUS_AP_CREATING: interface configured for AP operation. - * @BRCMF_VIF_STATUS_AP_CREATED: AP operation started. - */ - enum brcmf_vif_status { -@@ -151,7 +150,6 @@ enum brcmf_vif_status { - BRCMF_VIF_STATUS_CONNECTING, - BRCMF_VIF_STATUS_CONNECTED, - BRCMF_VIF_STATUS_DISCONNECTING, -- BRCMF_VIF_STATUS_AP_CREATING, - BRCMF_VIF_STATUS_AP_CREATED - }; - diff --git a/package/kernel/mac80211/patches/372-0011-brcmfmac-Properly-set-carrier-state-of-netdev.patch b/package/kernel/mac80211/patches/372-0011-brcmfmac-Properly-set-carrier-state-of-netdev.patch deleted file mode 100644 index c0948ded40..0000000000 --- a/package/kernel/mac80211/patches/372-0011-brcmfmac-Properly-set-carrier-state-of-netdev.patch +++ /dev/null @@ -1,122 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 8 Oct 2015 20:33:21 +0200 -Subject: [PATCH] brcmfmac: Properly set carrier state of netdev. - -Use the netif_carrier api to correctly set carrier state on the -different modes. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -4250,6 +4250,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi - brcmf_dbg(TRACE, "GO mode configuration complete\n"); - } - set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); -+ brcmf_net_setcarrier(ifp, true); - - exit: - if ((err) && (!mbss)) { -@@ -4314,6 +4315,7 @@ static int brcmf_cfg80211_stop_ap(struct - brcmf_set_mpc(ifp, 1); - brcmf_configure_arp_offload(ifp, true); - clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); -+ brcmf_net_setcarrier(ifp, false); - - return err; - } -@@ -5023,6 +5025,7 @@ brcmf_notify_connect_status(struct brcmf - &ifp->vif->sme_state); - } else - brcmf_bss_connect_done(cfg, ndev, e, true); -+ brcmf_net_setcarrier(ifp, true); - } else if (brcmf_is_linkdown(e)) { - brcmf_dbg(CONN, "Linkdown\n"); - if (!brcmf_is_ibssmode(ifp->vif)) { -@@ -5032,6 +5035,7 @@ brcmf_notify_connect_status(struct brcmf - brcmf_init_prof(ndev_to_prof(ndev)); - if (ndev != cfg_to_ndev(cfg)) - complete(&cfg->vif_disabled); -+ brcmf_net_setcarrier(ifp, false); - } else if (brcmf_is_nonetwork(cfg, e)) { - if (brcmf_is_ibssmode(ifp->vif)) - clear_bit(BRCMF_VIF_STATUS_CONNECTING, ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -635,8 +635,7 @@ static int brcmf_netdev_stop(struct net_ - - brcmf_cfg80211_down(ndev); - -- /* Set state and stop OS transmissions */ -- netif_stop_queue(ndev); -+ brcmf_net_setcarrier(ifp, false); - - return 0; - } -@@ -670,8 +669,8 @@ static int brcmf_netdev_open(struct net_ - return -EIO; - } - -- /* Allow transmit calls */ -- netif_start_queue(ndev); -+ /* Clear, carrier, set when connected or AP mode. */ -+ netif_carrier_off(ndev); - return 0; - } - -@@ -736,6 +735,24 @@ static void brcmf_net_detach(struct net_ - brcmf_cfg80211_free_netdev(ndev); - } - -+void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on) -+{ -+ struct net_device *ndev; -+ -+ brcmf_dbg(TRACE, "Enter, idx=%d carrier=%d\n", ifp->bssidx, on); -+ -+ ndev = ifp->ndev; -+ brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_DISCONNECTED, !on); -+ if (on) { -+ if (!netif_carrier_ok(ndev)) -+ netif_carrier_on(ndev); -+ -+ } else { -+ if (netif_carrier_ok(ndev)) -+ netif_carrier_off(ndev); -+ } -+} -+ - static int brcmf_net_p2p_open(struct net_device *ndev) - { - brcmf_dbg(TRACE, "Enter\n"); ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -154,10 +154,13 @@ struct brcmf_fws_mac_descriptor; - * netif stopped due to firmware signalling flow control. - * @BRCMF_NETIF_STOP_REASON_FLOW: - * netif stopped due to flowring full. -+ * @BRCMF_NETIF_STOP_REASON_DISCONNECTED: -+ * netif stopped due to not being connected (STA mode). - */ - enum brcmf_netif_stop_reason { -- BRCMF_NETIF_STOP_REASON_FWS_FC = 1, -- BRCMF_NETIF_STOP_REASON_FLOW = 2 -+ BRCMF_NETIF_STOP_REASON_FWS_FC = BIT(0), -+ BRCMF_NETIF_STOP_REASON_FLOW = BIT(1), -+ BRCMF_NETIF_STOP_REASON_DISCONNECTED = BIT(2) - }; - - /** -@@ -213,5 +216,6 @@ void brcmf_txflowblock_if(struct brcmf_i - enum brcmf_netif_stop_reason reason, bool state); - void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success); - void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb); -+void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on); - - #endif /* BRCMFMAC_CORE_H */ diff --git a/package/kernel/mac80211/patches/373-brcm80211-Add-support-for-brcm4371.patch b/package/kernel/mac80211/patches/373-brcm80211-Add-support-for-brcm4371.patch deleted file mode 100644 index ea6fad1cea..0000000000 --- a/package/kernel/mac80211/patches/373-brcm80211-Add-support-for-brcm4371.patch +++ /dev/null @@ -1,78 +0,0 @@ -From: Eric Caruso <ejcaruso@google.com> -Date: Wed, 14 Oct 2015 12:34:11 -0700 -Subject: [PATCH] brcm80211: Add support for brcm4371 - -This is a new Broadcom chip and we should be able to recognize it. - -Signed-off-by: Eric Caruso <ejcaruso@google.com> -Acked-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -682,6 +682,7 @@ static u32 brcmf_chip_tcm_rambase(struct - case BRCM_CC_43570_CHIP_ID: - case BRCM_CC_4358_CHIP_ID: - case BRCM_CC_43602_CHIP_ID: -+ case BRCM_CC_4371_CHIP_ID: - return 0x180000; - case BRCM_CC_4365_CHIP_ID: - case BRCM_CC_4366_CHIP_ID: ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -59,6 +59,8 @@ enum brcmf_pcie_state { - #define BRCMF_PCIE_4365_NVRAM_NAME "brcm/brcmfmac4365b-pcie.txt" - #define BRCMF_PCIE_4366_FW_NAME "brcm/brcmfmac4366b-pcie.bin" - #define BRCMF_PCIE_4366_NVRAM_NAME "brcm/brcmfmac4366b-pcie.txt" -+#define BRCMF_PCIE_4371_FW_NAME "brcm/brcmfmac4371-pcie.bin" -+#define BRCMF_PCIE_4371_NVRAM_NAME "brcm/brcmfmac4371-pcie.txt" - - #define BRCMF_PCIE_FW_UP_TIMEOUT 2000 /* msec */ - -@@ -212,6 +214,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_4365_FW_NAME) - MODULE_FIRMWARE(BRCMF_PCIE_4365_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4366_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4366_NVRAM_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4371_FW_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4371_NVRAM_NAME); - - - struct brcmf_pcie_console { -@@ -1521,6 +1525,10 @@ static int brcmf_pcie_get_fwnames(struct - fw_name = BRCMF_PCIE_4366_FW_NAME; - nvram_name = BRCMF_PCIE_4366_NVRAM_NAME; - break; -+ case BRCM_CC_4371_CHIP_ID: -+ fw_name = BRCMF_PCIE_4371_FW_NAME; -+ nvram_name = BRCMF_PCIE_4371_NVRAM_NAME; -+ break; - default: - brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip); - return -ENODEV; -@@ -2060,6 +2068,7 @@ static struct pci_device_id brcmf_pcie_d - BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_2G_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4366_5G_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4371_DEVICE_ID), - { /* end: all zeroes */ } - }; - ---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -@@ -50,6 +50,7 @@ - #define BRCM_CC_43602_CHIP_ID 43602 - #define BRCM_CC_4365_CHIP_ID 0x4365 - #define BRCM_CC_4366_CHIP_ID 0x4366 -+#define BRCM_CC_4371_CHIP_ID 0x4371 - - /* USB Device IDs */ - #define BRCM_USB_43143_DEVICE_ID 0xbd1e -@@ -75,6 +76,7 @@ - #define BRCM_PCIE_4366_DEVICE_ID 0x43c3 - #define BRCM_PCIE_4366_2G_DEVICE_ID 0x43c4 - #define BRCM_PCIE_4366_5G_DEVICE_ID 0x43c5 -+#define BRCM_PCIE_4371_DEVICE_ID 0x440d - - - /* brcmsmac IDs */ diff --git a/package/kernel/mac80211/patches/374-0001-brcmfmac-Add-support-for-the-BCM4359-11ac-RSDB-PCIE-.patch b/package/kernel/mac80211/patches/374-0001-brcmfmac-Add-support-for-the-BCM4359-11ac-RSDB-PCIE-.patch deleted file mode 100644 index 221bae6299..0000000000 --- a/package/kernel/mac80211/patches/374-0001-brcmfmac-Add-support-for-the-BCM4359-11ac-RSDB-PCIE-.patch +++ /dev/null @@ -1,78 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:11 +0100 -Subject: [PATCH] brcmfmac: Add support for the BCM4359 11ac RSDB PCIE device. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c -@@ -681,6 +681,7 @@ static u32 brcmf_chip_tcm_rambase(struct - case BRCM_CC_43569_CHIP_ID: - case BRCM_CC_43570_CHIP_ID: - case BRCM_CC_4358_CHIP_ID: -+ case BRCM_CC_4359_CHIP_ID: - case BRCM_CC_43602_CHIP_ID: - case BRCM_CC_4371_CHIP_ID: - return 0x180000; ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -55,6 +55,8 @@ enum brcmf_pcie_state { - #define BRCMF_PCIE_43570_NVRAM_NAME "brcm/brcmfmac43570-pcie.txt" - #define BRCMF_PCIE_4358_FW_NAME "brcm/brcmfmac4358-pcie.bin" - #define BRCMF_PCIE_4358_NVRAM_NAME "brcm/brcmfmac4358-pcie.txt" -+#define BRCMF_PCIE_4359_FW_NAME "brcm/brcmfmac4359-pcie.bin" -+#define BRCMF_PCIE_4359_NVRAM_NAME "brcm/brcmfmac4359-pcie.txt" - #define BRCMF_PCIE_4365_FW_NAME "brcm/brcmfmac4365b-pcie.bin" - #define BRCMF_PCIE_4365_NVRAM_NAME "brcm/brcmfmac4365b-pcie.txt" - #define BRCMF_PCIE_4366_FW_NAME "brcm/brcmfmac4366b-pcie.bin" -@@ -210,6 +212,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME - MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4359_FW_NAME); -+MODULE_FIRMWARE(BRCMF_PCIE_4359_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4365_FW_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4365_NVRAM_NAME); - MODULE_FIRMWARE(BRCMF_PCIE_4366_FW_NAME); -@@ -1517,6 +1521,10 @@ static int brcmf_pcie_get_fwnames(struct - fw_name = BRCMF_PCIE_4358_FW_NAME; - nvram_name = BRCMF_PCIE_4358_NVRAM_NAME; - break; -+ case BRCM_CC_4359_CHIP_ID: -+ fw_name = BRCMF_PCIE_4359_FW_NAME; -+ nvram_name = BRCMF_PCIE_4359_NVRAM_NAME; -+ break; - case BRCM_CC_4365_CHIP_ID: - fw_name = BRCMF_PCIE_4365_FW_NAME; - nvram_name = BRCMF_PCIE_4365_NVRAM_NAME; -@@ -2058,6 +2066,7 @@ static struct pci_device_id brcmf_pcie_d - BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_4358_DEVICE_ID), -+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4359_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID), - BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID), ---- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h -@@ -47,6 +47,7 @@ - #define BRCM_CC_43569_CHIP_ID 43569 - #define BRCM_CC_43570_CHIP_ID 43570 - #define BRCM_CC_4358_CHIP_ID 0x4358 -+#define BRCM_CC_4359_CHIP_ID 0x4359 - #define BRCM_CC_43602_CHIP_ID 43602 - #define BRCM_CC_4365_CHIP_ID 0x4365 - #define BRCM_CC_4366_CHIP_ID 0x4366 -@@ -66,6 +67,7 @@ - #define BRCM_PCIE_43567_DEVICE_ID 0x43d3 - #define BRCM_PCIE_43570_DEVICE_ID 0x43d9 - #define BRCM_PCIE_4358_DEVICE_ID 0x43e9 -+#define BRCM_PCIE_4359_DEVICE_ID 0x43ef - #define BRCM_PCIE_43602_DEVICE_ID 0x43ba - #define BRCM_PCIE_43602_2G_DEVICE_ID 0x43bb - #define BRCM_PCIE_43602_5G_DEVICE_ID 0x43bc diff --git a/package/kernel/mac80211/patches/374-0002-brcmfmac-Simplify-and-fix-usage-of-brcmf_ifname.patch b/package/kernel/mac80211/patches/374-0002-brcmfmac-Simplify-and-fix-usage-of-brcmf_ifname.patch deleted file mode 100644 index 331896b98d..0000000000 --- a/package/kernel/mac80211/patches/374-0002-brcmfmac-Simplify-and-fix-usage-of-brcmf_ifname.patch +++ /dev/null @@ -1,110 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:12 +0100 -Subject: [PATCH] brcmfmac: Simplify and fix usage of brcmf_ifname. - -brcmf_ifname is a debug function to return a name related to an ifp, -but is using a rather complex implementation. It was also used -wrongly from bcdc as it did not use the bsscfgidx as it was supposed -to, but bssidx. This patch fixes that bug and simplifies -brcmf_ifname. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.c -@@ -187,7 +187,8 @@ retry: - goto retry; - if (id != bcdc->reqid) { - brcmf_err("%s: unexpected request id %d (expected %d)\n", -- brcmf_ifname(drvr, ifidx), id, bcdc->reqid); -+ brcmf_ifname(brcmf_get_ifp(drvr, ifidx)), id, -+ bcdc->reqid); - ret = -EINVAL; - goto done; - } -@@ -234,7 +235,8 @@ brcmf_proto_bcdc_set_dcmd(struct brcmf_p - - if (id != bcdc->reqid) { - brcmf_err("%s: unexpected request id %d (expected %d)\n", -- brcmf_ifname(drvr, ifidx), id, bcdc->reqid); -+ brcmf_ifname(brcmf_get_ifp(drvr, ifidx)), id, -+ bcdc->reqid); - ret = -EINVAL; - goto done; - } -@@ -298,13 +300,13 @@ brcmf_proto_bcdc_hdrpull(struct brcmf_pu - if (((h->flags & BCDC_FLAG_VER_MASK) >> BCDC_FLAG_VER_SHIFT) != - BCDC_PROTO_VER) { - brcmf_err("%s: non-BCDC packet received, flags 0x%x\n", -- brcmf_ifname(drvr, tmp_if->ifidx), h->flags); -+ brcmf_ifname(tmp_if), h->flags); - return -EBADE; - } - - if (h->flags & BCDC_FLAG_SUM_GOOD) { - brcmf_dbg(BCDC, "%s: BDC rcv, good checksum, flags 0x%x\n", -- brcmf_ifname(drvr, tmp_if->ifidx), h->flags); -+ brcmf_ifname(tmp_if), h->flags); - pktbuf->ip_summed = CHECKSUM_UNNECESSARY; - } - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -66,20 +66,13 @@ static int brcmf_p2p_enable; - module_param_named(p2pon, brcmf_p2p_enable, int, 0); - MODULE_PARM_DESC(p2pon, "enable legacy p2p management functionality"); - --char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx) -+char *brcmf_ifname(struct brcmf_if *ifp) - { -- if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) { -- brcmf_err("ifidx %d out of range\n", ifidx); -- return "<if_bad>"; -- } -- -- if (drvr->iflist[ifidx] == NULL) { -- brcmf_err("null i/f %d\n", ifidx); -+ if (!ifp) - return "<if_null>"; -- } - -- if (drvr->iflist[ifidx]->ndev) -- return drvr->iflist[ifidx]->ndev->name; -+ if (ifp->ndev) -+ return ifp->ndev->name; - - return "<if_none>"; - } -@@ -237,14 +230,14 @@ static netdev_tx_t brcmf_netdev_start_xm - struct sk_buff *skb2; - - brcmf_dbg(INFO, "%s: insufficient headroom\n", -- brcmf_ifname(drvr, ifp->bssidx)); -+ brcmf_ifname(ifp)); - drvr->bus_if->tx_realloc++; - skb2 = skb_realloc_headroom(skb, drvr->hdrlen); - dev_kfree_skb(skb); - skb = skb2; - if (skb == NULL) { - brcmf_err("%s: skb_realloc_headroom failed\n", -- brcmf_ifname(drvr, ifp->bssidx)); -+ brcmf_ifname(ifp)); - ret = -ENOMEM; - goto done; - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -205,7 +205,7 @@ struct brcmf_skb_reorder_data { - int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp); - - /* Return pointer to interface name */ --char *brcmf_ifname(struct brcmf_pub *drvr, int idx); -+char *brcmf_ifname(struct brcmf_if *ifp); - struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx); - int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); - struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, diff --git a/package/kernel/mac80211/patches/374-0003-brcmfmac-Remove-unnecessary-check-from-start_xmit.patch b/package/kernel/mac80211/patches/374-0003-brcmfmac-Remove-unnecessary-check-from-start_xmit.patch deleted file mode 100644 index 4d60521cc5..0000000000 --- a/package/kernel/mac80211/patches/374-0003-brcmfmac-Remove-unnecessary-check-from-start_xmit.patch +++ /dev/null @@ -1,32 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:13 +0100 -Subject: [PATCH] brcmfmac: Remove unnecessary check from start_xmit. - -The brcmf_netdev_start_xmit checks if the ndev is still valid by -checking if it still exists in database. This check is not needed -and therefor removed. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -217,14 +217,6 @@ static netdev_tx_t brcmf_netdev_start_xm - goto done; - } - -- if (!drvr->iflist[ifp->bssidx]) { -- brcmf_err("bad ifidx %d\n", ifp->bssidx); -- netif_stop_queue(ndev); -- dev_kfree_skb(skb); -- ret = -ENODEV; -- goto done; -- } -- - /* Make sure there's enough room for any header */ - if (skb_headroom(skb) < drvr->hdrlen) { - struct sk_buff *skb2; diff --git a/package/kernel/mac80211/patches/374-0004-brcmfmac-Remove-unncessary-variable-irq_requested.patch b/package/kernel/mac80211/patches/374-0004-brcmfmac-Remove-unncessary-variable-irq_requested.patch deleted file mode 100644 index 50302975ef..0000000000 --- a/package/kernel/mac80211/patches/374-0004-brcmfmac-Remove-unncessary-variable-irq_requested.patch +++ /dev/null @@ -1,49 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:14 +0100 -Subject: [PATCH] brcmfmac: Remove unncessary variable irq_requested. - -The variable irq_requested is unneeded as the functionality -it is providing, is also provided by the variable irq_allocated. - -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -257,7 +257,6 @@ struct brcmf_pcie_core_info { - struct brcmf_pciedev_info { - enum brcmf_pcie_state state; - bool in_irq; -- bool irq_requested; - struct pci_dev *pdev; - char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN]; - char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN]; -@@ -889,7 +888,6 @@ static int brcmf_pcie_request_irq(struct - - brcmf_dbg(PCIE, "Enter\n"); - /* is it a v1 or v2 implementation */ -- devinfo->irq_requested = false; - pci_enable_msi(pdev); - if (devinfo->generic_corerev == BRCMF_PCIE_GENREV1) { - if (request_threaded_irq(pdev->irq, -@@ -912,7 +910,6 @@ static int brcmf_pcie_request_irq(struct - return -EIO; - } - } -- devinfo->irq_requested = true; - devinfo->irq_allocated = true; - return 0; - } -@@ -930,9 +927,6 @@ static void brcmf_pcie_release_irq(struc - pdev = devinfo->pdev; - - brcmf_pcie_intr_disable(devinfo); -- if (!devinfo->irq_requested) -- return; -- devinfo->irq_requested = false; - free_irq(pdev->irq, devinfo); - pci_disable_msi(pdev); - diff --git a/package/kernel/mac80211/patches/374-0005-brcmfmac-Disable-runtime-pm-for-USB.patch b/package/kernel/mac80211/patches/374-0005-brcmfmac-Disable-runtime-pm-for-USB.patch deleted file mode 100644 index f2afb90c17..0000000000 --- a/package/kernel/mac80211/patches/374-0005-brcmfmac-Disable-runtime-pm-for-USB.patch +++ /dev/null @@ -1,26 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:15 +0100 -Subject: [PATCH] brcmfmac: Disable runtime pm for USB. - -Currently runtime pm is enabled for USB, but it is not properly -supported by driver. This patch disables the runtime PM support -completely for USB, as it currently can result in problems on -some systems. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c -@@ -1504,7 +1504,6 @@ static struct usb_driver brcmf_usbdrvr = - .suspend = brcmf_usb_suspend, - .resume = brcmf_usb_resume, - .reset_resume = brcmf_usb_reset_resume, -- .supports_autosuspend = 1, - #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,5,0)) - .disable_hub_initiated_lpm = 1, - #endif diff --git a/package/kernel/mac80211/patches/374-0006-brcmfmac-Add-RSDB-support.patch b/package/kernel/mac80211/patches/374-0006-brcmfmac-Add-RSDB-support.patch deleted file mode 100644 index 78a95c57b1..0000000000 --- a/package/kernel/mac80211/patches/374-0006-brcmfmac-Add-RSDB-support.patch +++ /dev/null @@ -1,65 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:16 +0100 -Subject: [PATCH] brcmfmac: Add RSDB support. - -Broadcom devices with a single 802.11 core can work on two band -concurrently using VSDB feature, ie. Virtual Simultaneous Dual-Band. -For devices that are fitted with two 802.11 cores and RF paths the -driver should support a firmware feature called RSDB, which stands -for Real Simultaneous Dual-Band. RSDB works almost autonomously in -firmware except for AP config. When the device supports RSDB then -the interface should not be brought down when configuring it, -otherwise the link (if configured) on the other interface will be -lost. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -[kvalo@codeaurora.org: changed the commit log based on discussion] -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -4182,7 +4182,9 @@ brcmf_cfg80211_start_ap(struct wiphy *wi - } - } - -- if (dev_role == NL80211_IFTYPE_AP) { -+ if ((dev_role == NL80211_IFTYPE_AP) && -+ ((ifp->ifidx == 0) || -+ !brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB))) { - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_DOWN, 1); - if (err < 0) { - brcmf_err("BRCMF_C_DOWN error %d\n", err); ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c -@@ -137,6 +137,7 @@ void brcmf_feat_attach(struct brcmf_pub - if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID) - brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0); - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_P2P, "p2p"); -+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode"); - - if (brcmf_feature_disable) { - brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n", ---- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h -@@ -24,13 +24,16 @@ - * PNO: preferred network offload. - * WOWL: Wake-On-WLAN. - * P2P: peer-to-peer -+ * RSDB: Real Simultaneous Dual Band - */ - #define BRCMF_FEAT_LIST \ - BRCMF_FEAT_DEF(MBSS) \ - BRCMF_FEAT_DEF(MCHAN) \ - BRCMF_FEAT_DEF(PNO) \ - BRCMF_FEAT_DEF(WOWL) \ -- BRCMF_FEAT_DEF(P2P) -+ BRCMF_FEAT_DEF(P2P) \ -+ BRCMF_FEAT_DEF(RSDB) -+ - /* - * Quirks: - * diff --git a/package/kernel/mac80211/patches/374-0007-brcmfmac-Use-consistent-naming-for-bsscfgidx.patch b/package/kernel/mac80211/patches/374-0007-brcmfmac-Use-consistent-naming-for-bsscfgidx.patch deleted file mode 100644 index d1e72643bf..0000000000 --- a/package/kernel/mac80211/patches/374-0007-brcmfmac-Use-consistent-naming-for-bsscfgidx.patch +++ /dev/null @@ -1,533 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:17 +0100 -Subject: [PATCH] brcmfmac: Use consistent naming for bsscfgidx. - -The variable bsscfgidx is used in different places with different -names, e.g. bsscfg, bssidx, bsscfg_idx. This patch cleans this up -by using bsscfgidx everywhere. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -775,7 +775,8 @@ brcmf_cfg80211_change_iface(struct wiphy - s32 ap = 0; - s32 err = 0; - -- brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type); -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, type=%d\n", ifp->bsscfgidx, -+ type); - - /* WAR: There are a number of p2p interface related problems which - * need to be handled initially (before doing the validate). -@@ -2920,7 +2921,7 @@ brcmf_cfg80211_escan_handler(struct brcm - status = e->status; - - if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { -- brcmf_err("scan not ready, bssidx=%d\n", ifp->bssidx); -+ brcmf_err("scan not ready, bsscfgidx=%d\n", ifp->bsscfgidx); - return -EPERM; - } - -@@ -3876,7 +3877,8 @@ s32 brcmf_vif_set_mgmt_ie(struct brcmf_c - ifp = vif->ifp; - saved_ie = &vif->saved_ie; - -- brcmf_dbg(TRACE, "bssidx %d, pktflag : 0x%02X\n", ifp->bssidx, pktflag); -+ brcmf_dbg(TRACE, "bsscfgidx %d, pktflag : 0x%02X\n", ifp->bsscfgidx, -+ pktflag); - iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL); - if (!iovar_ie_buf) - return -ENOMEM; -@@ -4240,7 +4242,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wi - brcmf_err("setting ssid failed %d\n", err); - goto exit; - } -- bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx); -+ bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx); - bss_enable.enable = cpu_to_le32(1); - err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable, - sizeof(bss_enable)); -@@ -4307,7 +4309,7 @@ static int brcmf_cfg80211_stop_ap(struct - if (err < 0) - brcmf_err("BRCMF_C_UP error %d\n", err); - } else { -- bss_enable.bsscfg_idx = cpu_to_le32(ifp->bssidx); -+ bss_enable.bsscfgidx = cpu_to_le32(ifp->bsscfgidx); - bss_enable.enable = cpu_to_le32(0); - err = brcmf_fil_iovar_data_set(ifp, "bss", &bss_enable, - sizeof(bss_enable)); -@@ -5093,9 +5095,9 @@ static s32 brcmf_notify_vif_event(struct - struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; - struct brcmf_cfg80211_vif *vif; - -- brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfg %u\n", -+ brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfgidx %u\n", - ifevent->action, ifevent->flags, ifevent->ifidx, -- ifevent->bssidx); -+ ifevent->bsscfgidx); - - mutex_lock(&event->vif_event_lock); - event->action = ifevent->action; ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -80,7 +80,7 @@ char *brcmf_ifname(struct brcmf_if *ifp) - struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx) - { - struct brcmf_if *ifp; -- s32 bssidx; -+ s32 bsscfgidx; - - if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) { - brcmf_err("ifidx %d out of range\n", ifidx); -@@ -88,9 +88,9 @@ struct brcmf_if *brcmf_get_ifp(struct br - } - - ifp = NULL; -- bssidx = drvr->if2bss[ifidx]; -- if (bssidx >= 0) -- ifp = drvr->iflist[bssidx]; -+ bsscfgidx = drvr->if2bss[ifidx]; -+ if (bsscfgidx >= 0) -+ ifp = drvr->iflist[bsscfgidx]; - - return ifp; - } -@@ -108,7 +108,7 @@ static void _brcmf_set_multicast_list(st - - ifp = container_of(work, struct brcmf_if, multicast_work); - -- brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); - - ndev = ifp->ndev; - -@@ -168,7 +168,7 @@ _brcmf_set_mac_address(struct work_struc - - ifp = container_of(work, struct brcmf_if, setmacaddr_work); - -- brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); - - err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr, - ETH_ALEN); -@@ -206,7 +206,7 @@ static netdev_tx_t brcmf_netdev_start_xm - struct brcmf_pub *drvr = ifp->drvr; - struct ethhdr *eh = (struct ethhdr *)(skb->data); - -- brcmf_dbg(DATA, "Enter, idx=%d\n", ifp->bssidx); -+ brcmf_dbg(DATA, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); - - /* Can the device send data? */ - if (drvr->bus_if->state != BRCMF_BUS_UP) { -@@ -267,8 +267,8 @@ void brcmf_txflowblock_if(struct brcmf_i - if (!ifp || !ifp->ndev) - return; - -- brcmf_dbg(TRACE, "enter: idx=%d stop=0x%X reason=%d state=%d\n", -- ifp->bssidx, ifp->netif_stop, reason, state); -+ brcmf_dbg(TRACE, "enter: bsscfgidx=%d stop=0x%X reason=%d state=%d\n", -+ ifp->bsscfgidx, ifp->netif_stop, reason, state); - - spin_lock_irqsave(&ifp->netif_stop_lock, flags); - if (state) { -@@ -587,7 +587,7 @@ static struct net_device_stats *brcmf_ne - { - struct brcmf_if *ifp = netdev_priv(ndev); - -- brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); - - return &ifp->stats; - } -@@ -616,7 +616,7 @@ static int brcmf_netdev_stop(struct net_ - { - struct brcmf_if *ifp = netdev_priv(ndev); - -- brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); - - brcmf_cfg80211_down(ndev); - -@@ -632,7 +632,7 @@ static int brcmf_netdev_open(struct net_ - struct brcmf_bus *bus_if = drvr->bus_if; - u32 toe_ol; - -- brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx); -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); - - /* If bus is not ready, can't continue */ - if (bus_if->state != BRCMF_BUS_UP) { -@@ -674,7 +674,7 @@ int brcmf_net_attach(struct brcmf_if *if - struct net_device *ndev; - s32 err; - -- brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx, -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d mac=%pM\n", ifp->bsscfgidx, - ifp->mac_addr); - ndev = ifp->ndev; - -@@ -706,7 +706,7 @@ int brcmf_net_attach(struct brcmf_if *if - return 0; - - fail: -- drvr->iflist[ifp->bssidx] = NULL; -+ drvr->iflist[ifp->bsscfgidx] = NULL; - ndev->netdev_ops = NULL; - free_netdev(ndev); - return -EBADE; -@@ -724,7 +724,8 @@ void brcmf_net_setcarrier(struct brcmf_i - { - struct net_device *ndev; - -- brcmf_dbg(TRACE, "Enter, idx=%d carrier=%d\n", ifp->bssidx, on); -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d carrier=%d\n", ifp->bsscfgidx, -+ on); - - ndev = ifp->ndev; - brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_DISCONNECTED, !on); -@@ -771,7 +772,7 @@ static int brcmf_net_p2p_attach(struct b - { - struct net_device *ndev; - -- brcmf_dbg(TRACE, "Enter, idx=%d mac=%pM\n", ifp->bssidx, -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d mac=%pM\n", ifp->bsscfgidx, - ifp->mac_addr); - ndev = ifp->ndev; - -@@ -790,21 +791,21 @@ static int brcmf_net_p2p_attach(struct b - return 0; - - fail: -- ifp->drvr->iflist[ifp->bssidx] = NULL; -+ ifp->drvr->iflist[ifp->bsscfgidx] = NULL; - ndev->netdev_ops = NULL; - free_netdev(ndev); - return -EBADE; - } - --struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, -+struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx, - bool is_p2pdev, char *name, u8 *mac_addr) - { - struct brcmf_if *ifp; - struct net_device *ndev; - -- brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifidx); -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", bsscfgidx, ifidx); - -- ifp = drvr->iflist[bssidx]; -+ ifp = drvr->iflist[bsscfgidx]; - /* - * Delete the existing interface before overwriting it - * in case we missed the BRCMF_E_IF_DEL event. -@@ -815,7 +816,7 @@ struct brcmf_if *brcmf_add_if(struct brc - if (ifidx) { - netif_stop_queue(ifp->ndev); - brcmf_net_detach(ifp->ndev); -- drvr->iflist[bssidx] = NULL; -+ drvr->iflist[bsscfgidx] = NULL; - } else { - brcmf_err("ignore IF event\n"); - return ERR_PTR(-EINVAL); -@@ -839,15 +840,15 @@ struct brcmf_if *brcmf_add_if(struct brc - ndev->destructor = brcmf_cfg80211_free_netdev; - ifp = netdev_priv(ndev); - ifp->ndev = ndev; -- /* store mapping ifidx to bssidx */ -+ /* store mapping ifidx to bsscfgidx */ - if (drvr->if2bss[ifidx] == BRCMF_BSSIDX_INVALID) -- drvr->if2bss[ifidx] = bssidx; -+ drvr->if2bss[ifidx] = bsscfgidx; - } - - ifp->drvr = drvr; -- drvr->iflist[bssidx] = ifp; -+ drvr->iflist[bsscfgidx] = ifp; - ifp->ifidx = ifidx; -- ifp->bssidx = bssidx; -+ ifp->bsscfgidx = bsscfgidx; - - init_waitqueue_head(&ifp->pend_8021x_wait); - spin_lock_init(&ifp->netif_stop_lock); -@@ -861,21 +862,22 @@ struct brcmf_if *brcmf_add_if(struct brc - return ifp; - } - --static void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) -+static void brcmf_del_if(struct brcmf_pub *drvr, s32 bsscfgidx) - { - struct brcmf_if *ifp; - -- ifp = drvr->iflist[bssidx]; -- drvr->iflist[bssidx] = NULL; -+ ifp = drvr->iflist[bsscfgidx]; -+ drvr->iflist[bsscfgidx] = NULL; - if (!ifp) { -- brcmf_err("Null interface, idx=%d\n", bssidx); -+ brcmf_err("Null interface, bsscfgidx=%d\n", bsscfgidx); - return; - } -- brcmf_dbg(TRACE, "Enter, idx=%d, ifidx=%d\n", bssidx, ifp->ifidx); -- if (drvr->if2bss[ifp->ifidx] == bssidx) -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", bsscfgidx, -+ ifp->ifidx); -+ if (drvr->if2bss[ifp->ifidx] == bsscfgidx) - drvr->if2bss[ifp->ifidx] = BRCMF_BSSIDX_INVALID; - if (ifp->ndev) { -- if (bssidx == 0) { -+ if (bsscfgidx == 0) { - if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { - rtnl_lock(); - brcmf_netdev_stop(ifp->ndev); -@@ -905,12 +907,12 @@ static void brcmf_del_if(struct brcmf_pu - - void brcmf_remove_interface(struct brcmf_if *ifp) - { -- if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bssidx] != ifp)) -+ if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bsscfgidx] != ifp)) - return; -- brcmf_dbg(TRACE, "Enter, bssidx=%d, ifidx=%d\n", ifp->bssidx, -+ brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", ifp->bsscfgidx, - ifp->ifidx); - brcmf_fws_del_interface(ifp); -- brcmf_del_if(ifp->drvr, ifp->bssidx); -+ brcmf_del_if(ifp->drvr, ifp->bsscfgidx); - } - - int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr) -@@ -925,10 +927,10 @@ int brcmf_get_next_free_bsscfgidx(struct - highest = 2; - for (ifidx = 0; ifidx < BRCMF_MAX_IFS; ifidx++) { - if (drvr->iflist[ifidx]) { -- if (drvr->iflist[ifidx]->bssidx == bsscfgidx) -+ if (drvr->iflist[ifidx]->bsscfgidx == bsscfgidx) - bsscfgidx = highest + 1; -- else if (drvr->iflist[ifidx]->bssidx > highest) -- highest = drvr->iflist[ifidx]->bssidx; -+ else if (drvr->iflist[ifidx]->bsscfgidx > highest) -+ highest = drvr->iflist[ifidx]->bsscfgidx; - } else { - available = true; - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h -@@ -174,7 +174,7 @@ enum brcmf_netif_stop_reason { - * @multicast_work: worker object for multicast provisioning. - * @fws_desc: interface specific firmware-signalling descriptor. - * @ifidx: interface index in device firmware. -- * @bssidx: index of bss associated with this interface. -+ * @bsscfgidx: index of bss associated with this interface. - * @mac_addr: assigned mac address. - * @netif_stop: bitmap indicates reason why netif queues are stopped. - * @netif_stop_lock: spinlock for update netif_stop from multiple sources. -@@ -190,7 +190,7 @@ struct brcmf_if { - struct work_struct multicast_work; - struct brcmf_fws_mac_descriptor *fws_desc; - int ifidx; -- s32 bssidx; -+ s32 bsscfgidx; - u8 mac_addr[ETH_ALEN]; - u8 netif_stop; - spinlock_t netif_stop_lock; -@@ -208,7 +208,7 @@ int brcmf_netdev_wait_pend8021x(struct b - char *brcmf_ifname(struct brcmf_if *ifp); - struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx); - int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); --struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, -+struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx, - bool is_p2pdev, char *name, u8 *mac_addr); - void brcmf_remove_interface(struct brcmf_if *ifp); - int brcmf_get_next_free_bsscfgidx(struct brcmf_pub *drvr); ---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.c -@@ -49,7 +49,7 @@ static int brcmf_debug_psm_watchdog_noti - const struct brcmf_event_msg *evtmsg, - void *data) - { -- brcmf_dbg(TRACE, "enter: idx=%d\n", ifp->bssidx); -+ brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx); - - return brcmf_debug_create_memdump(ifp->drvr->bus_if, data, - evtmsg->datalen); ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c -@@ -182,8 +182,8 @@ static void brcmf_fweh_handle_if_event(s - bool is_p2pdev; - int err = 0; - -- brcmf_dbg(EVENT, "action: %u idx: %u bsscfg: %u flags: %u role: %u\n", -- ifevent->action, ifevent->ifidx, ifevent->bssidx, -+ brcmf_dbg(EVENT, "action: %u ifidx: %u bsscfgidx: %u flags: %u role: %u\n", -+ ifevent->action, ifevent->ifidx, ifevent->bsscfgidx, - ifevent->flags, ifevent->role); - - /* The P2P Device interface event must not be ignored contrary to what -@@ -204,12 +204,12 @@ static void brcmf_fweh_handle_if_event(s - return; - } - -- ifp = drvr->iflist[ifevent->bssidx]; -+ ifp = drvr->iflist[ifevent->bsscfgidx]; - - if (ifevent->action == BRCMF_E_IF_ADD) { - brcmf_dbg(EVENT, "adding %s (%pM)\n", emsg->ifname, - emsg->addr); -- ifp = brcmf_add_if(drvr, ifevent->bssidx, ifevent->ifidx, -+ ifp = brcmf_add_if(drvr, ifevent->bsscfgidx, ifevent->ifidx, - is_p2pdev, emsg->ifname, emsg->addr); - if (IS_ERR(ifp)) - return; ---- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h -@@ -219,7 +219,7 @@ struct brcmf_if_event { - u8 ifidx; - u8 action; - u8 flags; -- u8 bssidx; -+ u8 bsscfgidx; - u8 role; - }; - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c -@@ -293,22 +293,22 @@ brcmf_fil_iovar_int_get(struct brcmf_if - } - - static u32 --brcmf_create_bsscfg(s32 bssidx, char *name, char *data, u32 datalen, char *buf, -- u32 buflen) -+brcmf_create_bsscfg(s32 bsscfgidx, char *name, char *data, u32 datalen, -+ char *buf, u32 buflen) - { - const s8 *prefix = "bsscfg:"; - s8 *p; - u32 prefixlen; - u32 namelen; - u32 iolen; -- __le32 bssidx_le; -+ __le32 bsscfgidx_le; - -- if (bssidx == 0) -+ if (bsscfgidx == 0) - return brcmf_create_iovar(name, data, datalen, buf, buflen); - - prefixlen = strlen(prefix); - namelen = strlen(name) + 1; /* lengh of iovar name + null */ -- iolen = prefixlen + namelen + sizeof(bssidx_le) + datalen; -+ iolen = prefixlen + namelen + sizeof(bsscfgidx_le) + datalen; - - if (buflen < iolen) { - brcmf_err("buffer is too short\n"); -@@ -326,9 +326,9 @@ brcmf_create_bsscfg(s32 bssidx, char *na - p += namelen; - - /* bss config index as first data */ -- bssidx_le = cpu_to_le32(bssidx); -- memcpy(p, &bssidx_le, sizeof(bssidx_le)); -- p += sizeof(bssidx_le); -+ bsscfgidx_le = cpu_to_le32(bsscfgidx); -+ memcpy(p, &bsscfgidx_le, sizeof(bsscfgidx_le)); -+ p += sizeof(bsscfgidx_le); - - /* parameter buffer follows */ - if (datalen) -@@ -347,12 +347,12 @@ brcmf_fil_bsscfg_data_set(struct brcmf_i - - mutex_lock(&drvr->proto_block); - -- brcmf_dbg(FIL, "ifidx=%d, bssidx=%d, name=%s, len=%d\n", ifp->ifidx, -- ifp->bssidx, name, len); -+ brcmf_dbg(FIL, "ifidx=%d, bsscfgidx=%d, name=%s, len=%d\n", ifp->ifidx, -+ ifp->bsscfgidx, name, len); - brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data, - min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n"); - -- buflen = brcmf_create_bsscfg(ifp->bssidx, name, data, len, -+ buflen = brcmf_create_bsscfg(ifp->bsscfgidx, name, data, len, - drvr->proto_buf, sizeof(drvr->proto_buf)); - if (buflen) { - err = brcmf_fil_cmd_data(ifp, BRCMF_C_SET_VAR, drvr->proto_buf, -@@ -376,7 +376,7 @@ brcmf_fil_bsscfg_data_get(struct brcmf_i - - mutex_lock(&drvr->proto_block); - -- buflen = brcmf_create_bsscfg(ifp->bssidx, name, data, len, -+ buflen = brcmf_create_bsscfg(ifp->bsscfgidx, name, data, len, - drvr->proto_buf, sizeof(drvr->proto_buf)); - if (buflen) { - err = brcmf_fil_cmd_data(ifp, BRCMF_C_GET_VAR, drvr->proto_buf, -@@ -387,8 +387,8 @@ brcmf_fil_bsscfg_data_get(struct brcmf_i - err = -EPERM; - brcmf_err("Creating bsscfg failed\n"); - } -- brcmf_dbg(FIL, "ifidx=%d, bssidx=%d, name=%s, len=%d\n", ifp->ifidx, -- ifp->bssidx, name, len); -+ brcmf_dbg(FIL, "ifidx=%d, bsscfgidx=%d, name=%s, len=%d\n", ifp->ifidx, -+ ifp->bsscfgidx, name, len); - brcmf_dbg_hex_dump(BRCMF_FIL_ON(), data, - min_t(uint, len, MAX_HEX_DUMP_LEN), "data\n"); - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -@@ -170,7 +170,7 @@ struct brcmf_fil_af_params_le { - }; - - struct brcmf_fil_bss_enable_le { -- __le32 bsscfg_idx; -+ __le32 bsscfgidx; - __le32 enable; - }; - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -@@ -719,7 +719,7 @@ static void brcmf_fws_macdesc_init(struc - desc->state = BRCMF_FWS_STATE_OPEN; - desc->requested_credit = 0; - desc->requested_packet = 0; -- /* depending on use may need ifp->bssidx instead */ -+ /* depending on use may need ifp->bsscfgidx instead */ - desc->interface_id = ifidx; - desc->ac_bitmap = 0xff; /* update this when handling APSD */ - if (addr) -@@ -1938,7 +1938,7 @@ void brcmf_fws_reset_interface(struct br - { - struct brcmf_fws_mac_descriptor *entry = ifp->fws_desc; - -- brcmf_dbg(TRACE, "enter: idx=%d\n", ifp->bssidx); -+ brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx); - if (!entry) - return; - ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -2067,7 +2067,7 @@ static struct wireless_dev *brcmf_p2p_cr - struct brcmf_if *p2p_ifp; - struct brcmf_if *pri_ifp; - int err; -- u32 bssidx; -+ u32 bsscfgidx; - - if (p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif) - return ERR_PTR(-ENOSPC); -@@ -2113,13 +2113,13 @@ static struct wireless_dev *brcmf_p2p_cr - memcpy(&p2p_vif->wdev.address, p2p->dev_addr, sizeof(p2p->dev_addr)); - - /* verify bsscfg index for P2P discovery */ -- err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); -+ err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bsscfgidx); - if (err < 0) { - brcmf_err("retrieving discover bsscfg index failed\n"); - goto fail; - } - -- WARN_ON(p2p_ifp->bssidx != bssidx); -+ WARN_ON(p2p_ifp->bsscfgidx != bsscfgidx); - - init_completion(&p2p->send_af_done); - INIT_WORK(&p2p->afx_hdl.afx_work, brcmf_p2p_afx_handler); diff --git a/package/kernel/mac80211/patches/374-0008-brcmfmac-Use-new-methods-for-pcie-Power-Management.patch b/package/kernel/mac80211/patches/374-0008-brcmfmac-Use-new-methods-for-pcie-Power-Management.patch deleted file mode 100644 index fb2b85e46c..0000000000 --- a/package/kernel/mac80211/patches/374-0008-brcmfmac-Use-new-methods-for-pcie-Power-Management.patch +++ /dev/null @@ -1,163 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:18 +0100 -Subject: [PATCH] brcmfmac: Use new methods for pcie Power Management. - -Currently the legacy methods suspend and resume are used for pcie -devices. This is not the preferable method and is also causing -issues with some setups when doing hibernate. Changing this to -use the new PM methods. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -1388,10 +1388,6 @@ static void brcmf_pcie_wowl_config(struc - - brcmf_dbg(PCIE, "Configuring WOWL, enabled=%d\n", enabled); - devinfo->wowl_enabled = enabled; -- if (enabled) -- device_set_wakeup_enable(&devinfo->pdev->dev, true); -- else -- device_set_wakeup_enable(&devinfo->pdev->dev, false); - } - - -@@ -1961,15 +1957,14 @@ brcmf_pcie_remove(struct pci_dev *pdev) - #ifdef CONFIG_PM - - --static int brcmf_pcie_suspend(struct pci_dev *pdev, pm_message_t state) -+static int brcmf_pcie_pm_enter_D3(struct device *dev) - { - struct brcmf_pciedev_info *devinfo; - struct brcmf_bus *bus; -- int err; - -- brcmf_dbg(PCIE, "Enter, state=%d, pdev=%p\n", state.event, pdev); -+ brcmf_err("Enter\n"); - -- bus = dev_get_drvdata(&pdev->dev); -+ bus = dev_get_drvdata(dev); - devinfo = bus->bus_priv.pcie->devinfo; - - brcmf_bus_change_state(bus, BRCMF_BUS_DOWN); -@@ -1984,62 +1979,45 @@ static int brcmf_pcie_suspend(struct pci - brcmf_err("Timeout on response for entering D3 substate\n"); - return -EIO; - } -- brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D0_INFORM_IN_USE); - -- err = pci_save_state(pdev); -- if (err) -- brcmf_err("pci_save_state failed, err=%d\n", err); -- if ((err) || (!devinfo->wowl_enabled)) { -- brcmf_chip_detach(devinfo->ci); -- devinfo->ci = NULL; -- brcmf_pcie_remove(pdev); -- return 0; -- } -+ devinfo->state = BRCMFMAC_PCIE_STATE_DOWN; - -- return pci_prepare_to_sleep(pdev); -+ return 0; - } - --static int brcmf_pcie_resume(struct pci_dev *pdev) -+ -+static int brcmf_pcie_pm_leave_D3(struct device *dev) - { - struct brcmf_pciedev_info *devinfo; - struct brcmf_bus *bus; -+ struct pci_dev *pdev; - int err; - -- bus = dev_get_drvdata(&pdev->dev); -- brcmf_dbg(PCIE, "Enter, pdev=%p, bus=%p\n", pdev, bus); -+ brcmf_err("Enter\n"); - -- err = pci_set_power_state(pdev, PCI_D0); -- if (err) { -- brcmf_err("pci_set_power_state failed, err=%d\n", err); -- goto cleanup; -- } -- pci_restore_state(pdev); -- pci_enable_wake(pdev, PCI_D3hot, false); -- pci_enable_wake(pdev, PCI_D3cold, false); -+ bus = dev_get_drvdata(dev); -+ devinfo = bus->bus_priv.pcie->devinfo; -+ brcmf_dbg(PCIE, "Enter, dev=%p, bus=%p\n", dev, bus); - - /* Check if device is still up and running, if so we are ready */ -- if (bus) { -- devinfo = bus->bus_priv.pcie->devinfo; -- if (brcmf_pcie_read_reg32(devinfo, -- BRCMF_PCIE_PCIE2REG_INTMASK) != 0) { -- if (brcmf_pcie_send_mb_data(devinfo, -- BRCMF_H2D_HOST_D0_INFORM)) -- goto cleanup; -- brcmf_dbg(PCIE, "Hot resume, continue....\n"); -- brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2); -- brcmf_bus_change_state(bus, BRCMF_BUS_UP); -- brcmf_pcie_intr_enable(devinfo); -- return 0; -- } -+ if (brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_INTMASK) != 0) { -+ brcmf_dbg(PCIE, "Try to wakeup device....\n"); -+ if (brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D0_INFORM)) -+ goto cleanup; -+ brcmf_dbg(PCIE, "Hot resume, continue....\n"); -+ devinfo->state = BRCMFMAC_PCIE_STATE_UP; -+ brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2); -+ brcmf_bus_change_state(bus, BRCMF_BUS_UP); -+ brcmf_pcie_intr_enable(devinfo); -+ return 0; - } - - cleanup: -- if (bus) { -- devinfo = bus->bus_priv.pcie->devinfo; -- brcmf_chip_detach(devinfo->ci); -- devinfo->ci = NULL; -- brcmf_pcie_remove(pdev); -- } -+ brcmf_chip_detach(devinfo->ci); -+ devinfo->ci = NULL; -+ pdev = devinfo->pdev; -+ brcmf_pcie_remove(pdev); -+ - err = brcmf_pcie_probe(pdev, NULL); - if (err) - brcmf_err("probe after resume failed, err=%d\n", err); -@@ -2048,6 +2026,14 @@ cleanup: - } - - -+static const struct dev_pm_ops brcmf_pciedrvr_pm = { -+ .suspend = brcmf_pcie_pm_enter_D3, -+ .resume = brcmf_pcie_pm_leave_D3, -+ .freeze = brcmf_pcie_pm_enter_D3, -+ .restore = brcmf_pcie_pm_leave_D3, -+}; -+ -+ - #endif /* CONFIG_PM */ - - -@@ -2086,9 +2072,8 @@ static struct pci_driver brcmf_pciedrvr - .probe = brcmf_pcie_probe, - .remove = brcmf_pcie_remove, - #ifdef CONFIG_PM -- .suspend = brcmf_pcie_suspend, -- .resume = brcmf_pcie_resume --#endif /* CONFIG_PM */ -+ .driver.pm = &brcmf_pciedrvr_pm, -+#endif - }; - - diff --git a/package/kernel/mac80211/patches/374-0009-brcmfmac-Add-wowl-wake-indication-report.patch b/package/kernel/mac80211/patches/374-0009-brcmfmac-Add-wowl-wake-indication-report.patch deleted file mode 100644 index 4324cc70c4..0000000000 --- a/package/kernel/mac80211/patches/374-0009-brcmfmac-Add-wowl-wake-indication-report.patch +++ /dev/null @@ -1,129 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Thu, 29 Oct 2015 20:33:19 +0100 -Subject: [PATCH] brcmfmac: Add wowl wake indication report. - -On wakeup of the system (resume) a wowl wakeup indication report -can be sent to cfg80211. This patch adds support for this. The -report specifies if the device was responsible for the wakeup -and if so, will specify the exact reason. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -3061,6 +3061,67 @@ static s32 brcmf_config_wowl_pattern(str - return ret; - } - -+#ifdef CPTCFG_PM -+ -+static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp) -+{ -+ struct brcmf_wowl_wakeind_le wake_ind_le; -+ struct cfg80211_wowlan_wakeup wakeup_data; -+ struct cfg80211_wowlan_wakeup *wakeup; -+ u32 wakeind; -+ s32 err; -+ -+ err = brcmf_fil_iovar_data_get(ifp, "wowl_wakeind", &wake_ind_le, -+ sizeof(wake_ind_le)); -+ if (!err) { -+ brcmf_err("Get wowl_wakeind failed, err = %d\n", err); -+ return; -+ } -+ -+ wakeind = le32_to_cpu(wake_ind_le.ucode_wakeind); -+ if (wakeind & (BRCMF_WOWL_MAGIC | BRCMF_WOWL_DIS | BRCMF_WOWL_BCN | -+ BRCMF_WOWL_RETR | BRCMF_WOWL_NET)) { -+ wakeup = &wakeup_data; -+ memset(&wakeup_data, 0, sizeof(wakeup_data)); -+ wakeup_data.pattern_idx = -1; -+ -+ if (wakeind & BRCMF_WOWL_MAGIC) { -+ brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_MAGIC\n"); -+ wakeup_data.magic_pkt = true; -+ } -+ if (wakeind & BRCMF_WOWL_DIS) { -+ brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_DIS\n"); -+ wakeup_data.disconnect = true; -+ } -+ if (wakeind & BRCMF_WOWL_BCN) { -+ brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_BCN\n"); -+ wakeup_data.disconnect = true; -+ } -+ if (wakeind & BRCMF_WOWL_RETR) { -+ brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_RETR\n"); -+ wakeup_data.disconnect = true; -+ } -+ if (wakeind & BRCMF_WOWL_NET) { -+ brcmf_dbg(INFO, "WOWL Wake indicator: BRCMF_WOWL_NET\n"); -+ /* For now always map to pattern 0, no API to get -+ * correct information available at the moment. -+ */ -+ wakeup_data.pattern_idx = 0; -+ } -+ } else { -+ wakeup = NULL; -+ } -+ cfg80211_report_wowlan_wakeup(&ifp->vif->wdev, wakeup, GFP_KERNEL); -+} -+ -+#else -+ -+static void brcmf_report_wowl_wakeind(struct wiphy *wiphy, struct brcmf_if *ifp) -+{ -+} -+ -+#endif /* CPTCFG_PM */ -+ - static s32 brcmf_cfg80211_resume(struct wiphy *wiphy) - { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); -@@ -3070,11 +3131,12 @@ static s32 brcmf_cfg80211_resume(struct - brcmf_dbg(TRACE, "Enter\n"); - - if (cfg->wowl_enabled) { -+ brcmf_report_wowl_wakeind(wiphy, ifp); -+ brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0); -+ brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0); - brcmf_configure_arp_offload(ifp, true); - brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, - cfg->pre_wowl_pmmode); -- brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0); -- brcmf_config_wowl_pattern(ifp, "clr", NULL, 0, NULL, 0); - cfg->wowl_enabled = false; - } - return 0; -@@ -3108,6 +3170,7 @@ static void brcmf_configure_wowl(struct - wowl->patterns[i].pkt_offset); - } - } -+ brcmf_fil_iovar_data_set(ifp, "wowl_wakeind", "clear", strlen("clear")); - brcmf_fil_iovar_int_set(ifp, "wowl", wowl_config); - brcmf_fil_iovar_int_set(ifp, "wowl_activate", 1); - brcmf_bus_wowl_config(cfg->pub->bus_if, true); ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -@@ -634,4 +634,16 @@ struct brcmf_assoclist_le { - u8 mac[BRCMF_MAX_ASSOCLIST][ETH_ALEN]; - }; - -+/** -+ * struct brcmf_wowl_wakeind_le - Wakeup indicators -+ * Note: note both fields contain same information. -+ * -+ * @pci_wakeind: Whether PCI PMECSR PMEStatus bit was set. -+ * @ucode_wakeind: What wakeup-event indication was set by ucode -+ */ -+struct brcmf_wowl_wakeind_le { -+ __le32 pci_wakeind; -+ __le32 ucode_wakeind; -+}; -+ - #endif /* FWIL_TYPES_H_ */ diff --git a/package/kernel/mac80211/patches/375-brcmfmac-constify-brcmf_bus_ops-structures.patch b/package/kernel/mac80211/patches/375-brcmfmac-constify-brcmf_bus_ops-structures.patch deleted file mode 100644 index a0cc231de7..0000000000 --- a/package/kernel/mac80211/patches/375-brcmfmac-constify-brcmf_bus_ops-structures.patch +++ /dev/null @@ -1,57 +0,0 @@ -From: Julia Lawall <Julia.Lawall@lip6.fr> -Date: Sat, 14 Nov 2015 17:22:07 +0100 -Subject: [PATCH] brcmfmac: constify brcmf_bus_ops structures - -The brcmf_bus_ops structures are never modified, so declare them as const. - -Done with the help of Coccinelle. - -Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> -Acked-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/bus.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/bus.h -@@ -137,7 +137,7 @@ struct brcmf_bus { - bool always_use_fws_queue; - bool wowl_supported; - -- struct brcmf_bus_ops *ops; -+ const struct brcmf_bus_ops *ops; - struct brcmf_bus_msgbuf *msgbuf; - }; - ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -1413,7 +1413,7 @@ static int brcmf_pcie_get_memdump(struct - } - - --static struct brcmf_bus_ops brcmf_pcie_bus_ops = { -+static const struct brcmf_bus_ops brcmf_pcie_bus_ops = { - .txdata = brcmf_pcie_tx, - .stop = brcmf_pcie_down, - .txctl = brcmf_pcie_tx_ctlpkt, ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -4025,7 +4025,7 @@ brcmf_sdio_watchdog(unsigned long data) - } - } - --static struct brcmf_bus_ops brcmf_sdio_bus_ops = { -+static const struct brcmf_bus_ops brcmf_sdio_bus_ops = { - .stop = brcmf_sdio_bus_stop, - .preinit = brcmf_sdio_bus_preinit, - .txdata = brcmf_sdio_bus_txdata, ---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c -@@ -1163,7 +1163,7 @@ static void brcmf_usb_wowl_config(struct - device_set_wakeup_enable(devinfo->dev, false); - } - --static struct brcmf_bus_ops brcmf_usb_bus_ops = { -+static const struct brcmf_bus_ops brcmf_usb_bus_ops = { - .txdata = brcmf_usb_tx, - .stop = brcmf_usb_down, - .txctl = brcmf_usb_tx_ctlpkt, diff --git a/package/kernel/mac80211/patches/376-0001-brcmfmac-Cleanup-ssid-storage.patch b/package/kernel/mac80211/patches/376-0001-brcmfmac-Cleanup-ssid-storage.patch deleted file mode 100644 index 83f1ebe907..0000000000 --- a/package/kernel/mac80211/patches/376-0001-brcmfmac-Cleanup-ssid-storage.patch +++ /dev/null @@ -1,251 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:37 +0100 -Subject: [PATCH] brcmfmac: Cleanup ssid storage. - -SSIDs used for connect and p2p got stored, but never used. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -959,7 +959,7 @@ brcmf_run_escan(struct brcmf_cfg80211_in - params_size += sizeof(u32) * ((request->n_channels + 1) / 2); - - /* Allocate space for populating ssids in struct */ -- params_size += sizeof(struct brcmf_ssid) * request->n_ssids; -+ params_size += sizeof(struct brcmf_ssid_le) * request->n_ssids; - } - - params = kzalloc(params_size, GFP_KERNEL); -@@ -1291,6 +1291,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *w - s32 wsec = 0; - s32 bcnprd; - u16 chanspec; -+ u32 ssid_len; - - brcmf_dbg(TRACE, "Enter\n"); - if (!check_vif_up(ifp->vif)) -@@ -1368,17 +1369,15 @@ brcmf_cfg80211_join_ibss(struct wiphy *w - memset(&join_params, 0, sizeof(struct brcmf_join_params)); - - /* SSID */ -- profile->ssid.SSID_len = min_t(u32, params->ssid_len, 32); -- memcpy(profile->ssid.SSID, params->ssid, profile->ssid.SSID_len); -- memcpy(join_params.ssid_le.SSID, params->ssid, profile->ssid.SSID_len); -- join_params.ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len); -+ ssid_len = min_t(u32, params->ssid_len, IEEE80211_MAX_SSID_LEN); -+ memcpy(join_params.ssid_le.SSID, params->ssid, ssid_len); -+ join_params.ssid_le.SSID_len = cpu_to_le32(ssid_len); - join_params_size = sizeof(join_params.ssid_le); - - /* BSSID */ - if (params->bssid) { - memcpy(join_params.params_le.bssid, params->bssid, ETH_ALEN); -- join_params_size = sizeof(join_params.ssid_le) + -- BRCMF_ASSOC_PARAMS_FIXED_SIZE; -+ join_params_size += BRCMF_ASSOC_PARAMS_FIXED_SIZE; - memcpy(profile->bssid, params->bssid, ETH_ALEN); - } else { - eth_broadcast_addr(join_params.params_le.bssid); -@@ -1728,7 +1727,6 @@ brcmf_cfg80211_connect(struct wiphy *wip - { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); - struct brcmf_if *ifp = netdev_priv(ndev); -- struct brcmf_cfg80211_profile *profile = &ifp->vif->profile; - struct ieee80211_channel *chan = sme->channel; - struct brcmf_join_params join_params; - size_t join_params_size; -@@ -1739,6 +1737,7 @@ brcmf_cfg80211_connect(struct wiphy *wip - struct brcmf_ext_join_params_le *ext_join_params; - u16 chanspec; - s32 err = 0; -+ u32 ssid_len; - - brcmf_dbg(TRACE, "Enter\n"); - if (!check_vif_up(ifp->vif)) -@@ -1824,15 +1823,6 @@ brcmf_cfg80211_connect(struct wiphy *wip - goto done; - } - -- profile->ssid.SSID_len = min_t(u32, (u32)sizeof(profile->ssid.SSID), -- (u32)sme->ssid_len); -- memcpy(&profile->ssid.SSID, sme->ssid, profile->ssid.SSID_len); -- if (profile->ssid.SSID_len < IEEE80211_MAX_SSID_LEN) { -- profile->ssid.SSID[profile->ssid.SSID_len] = 0; -- brcmf_dbg(CONN, "SSID \"%s\", len (%d)\n", profile->ssid.SSID, -- profile->ssid.SSID_len); -- } -- - /* Join with specific BSSID and cached SSID - * If SSID is zero join based on BSSID only - */ -@@ -1845,9 +1835,12 @@ brcmf_cfg80211_connect(struct wiphy *wip - err = -ENOMEM; - goto done; - } -- ext_join_params->ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len); -- memcpy(&ext_join_params->ssid_le.SSID, sme->ssid, -- profile->ssid.SSID_len); -+ ssid_len = min_t(u32, sme->ssid_len, IEEE80211_MAX_SSID_LEN); -+ ext_join_params->ssid_le.SSID_len = cpu_to_le32(ssid_len); -+ memcpy(&ext_join_params->ssid_le.SSID, sme->ssid, ssid_len); -+ if (ssid_len < IEEE80211_MAX_SSID_LEN) -+ brcmf_dbg(CONN, "SSID \"%s\", len (%d)\n", -+ ext_join_params->ssid_le.SSID, ssid_len); - - /* Set up join scan parameters */ - ext_join_params->scan_le.scan_type = -1; -@@ -1895,8 +1888,8 @@ brcmf_cfg80211_connect(struct wiphy *wip - memset(&join_params, 0, sizeof(join_params)); - join_params_size = sizeof(join_params.ssid_le); - -- memcpy(&join_params.ssid_le.SSID, sme->ssid, profile->ssid.SSID_len); -- join_params.ssid_le.SSID_len = cpu_to_le32(profile->ssid.SSID_len); -+ memcpy(&join_params.ssid_le.SSID, sme->ssid, ssid_len); -+ join_params.ssid_le.SSID_len = cpu_to_le32(ssid_len); - - if (sme->bssid) - memcpy(join_params.params_le.bssid, sme->bssid, ETH_ALEN); -@@ -2775,9 +2768,7 @@ CleanUp: - static s32 brcmf_update_bss_info(struct brcmf_cfg80211_info *cfg, - struct brcmf_if *ifp) - { -- struct brcmf_cfg80211_profile *profile = ndev_to_prof(ifp->ndev); - struct brcmf_bss_info_le *bi; -- struct brcmf_ssid *ssid; - const struct brcmf_tlv *tim; - u16 beacon_interval; - u8 dtim_period; -@@ -2789,8 +2780,6 @@ static s32 brcmf_update_bss_info(struct - if (brcmf_is_ibssmode(ifp->vif)) - return err; - -- ssid = &profile->ssid; -- - *(__le32 *)cfg->extra_buf = cpu_to_le32(WL_EXTRA_BUF_MAX); - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, - cfg->extra_buf, WL_EXTRA_BUF_MAX); ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -@@ -124,13 +124,11 @@ struct brcmf_cfg80211_security { - /** - * struct brcmf_cfg80211_profile - profile information. - * -- * @ssid: ssid of associated/associating ap. - * @bssid: bssid of joined/joining ibss. - * @sec: security information. - * @key: key information - */ - struct brcmf_cfg80211_profile { -- struct brcmf_ssid ssid; - u8 bssid[ETH_ALEN]; - struct brcmf_cfg80211_security sec; - struct brcmf_wsec_key key[BRCMF_MAX_DEFAULT_KEYS]; ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -@@ -282,14 +282,9 @@ struct brcm_rateset_le { - u8 rates[BRCMF_MAXRATES_IN_SET]; - }; - --struct brcmf_ssid { -- u32 SSID_len; -- unsigned char SSID[32]; --}; -- - struct brcmf_ssid_le { - __le32 SSID_len; -- unsigned char SSID[32]; -+ unsigned char SSID[IEEE80211_MAX_SSID_LEN]; - }; - - struct brcmf_scan_params_le { ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -642,7 +642,6 @@ static s32 brcmf_p2p_escan(struct brcmf_ - struct brcmf_cfg80211_vif *vif; - struct brcmf_p2p_scan_le *p2p_params; - struct brcmf_scan_params_le *sparams; -- struct brcmf_ssid ssid; - - memsize += num_chans * sizeof(__le16); - memblk = kzalloc(memsize, GFP_KERNEL); -@@ -655,16 +654,16 @@ static s32 brcmf_p2p_escan(struct brcmf_ - ret = -EINVAL; - goto exit; - } -+ p2p_params = (struct brcmf_p2p_scan_le *)memblk; -+ sparams = &p2p_params->eparams.params_le; - - switch (search_state) { - case WL_P2P_DISC_ST_SEARCH: - /* - * If we in SEARCH STATE, we don't need to set SSID explictly -- * because dongle use P2P WILDCARD internally by default -+ * because dongle use P2P WILDCARD internally by default, use -+ * null ssid, which it is already due to kzalloc. - */ -- /* use null ssid */ -- ssid.SSID_len = 0; -- memset(ssid.SSID, 0, sizeof(ssid.SSID)); - break; - case WL_P2P_DISC_ST_SCAN: - /* -@@ -673,8 +672,10 @@ static s32 brcmf_p2p_escan(struct brcmf_ - * P2P WILDCARD because we just do broadcast scan unless - * setting SSID. - */ -- ssid.SSID_len = BRCMF_P2P_WILDCARD_SSID_LEN; -- memcpy(ssid.SSID, BRCMF_P2P_WILDCARD_SSID, ssid.SSID_len); -+ sparams->ssid_le.SSID_len = -+ cpu_to_le32(BRCMF_P2P_WILDCARD_SSID_LEN); -+ memcpy(sparams->ssid_le.SSID, BRCMF_P2P_WILDCARD_SSID, -+ BRCMF_P2P_WILDCARD_SSID_LEN); - break; - default: - brcmf_err(" invalid search state %d\n", search_state); -@@ -687,11 +688,9 @@ static s32 brcmf_p2p_escan(struct brcmf_ - /* - * set p2p scan parameters. - */ -- p2p_params = (struct brcmf_p2p_scan_le *)memblk; - p2p_params->type = 'E'; - - /* determine the scan engine parameters */ -- sparams = &p2p_params->eparams.params_le; - sparams->bss_type = DOT11_BSSTYPE_ANY; - if (p2p->cfg->active_scan) - sparams->scan_type = 0; -@@ -699,9 +698,6 @@ static s32 brcmf_p2p_escan(struct brcmf_ - sparams->scan_type = 1; - - eth_broadcast_addr(sparams->bssid); -- if (ssid.SSID_len) -- memcpy(sparams->ssid_le.SSID, ssid.SSID, ssid.SSID_len); -- sparams->ssid_le.SSID_len = cpu_to_le32(ssid.SSID_len); - sparams->home_time = cpu_to_le32(P2PAPI_SCAN_HOME_TIME_MS); - - /* ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h -@@ -112,7 +112,6 @@ struct afx_hdl { - * @int_addr: P2P interface address. - * @bss_idx: informate for P2P bss types. - * @listen_timer: timer for @WL_P2P_DISC_ST_LISTEN discover state. -- * @ssid: ssid for P2P GO. - * @listen_channel: channel for @WL_P2P_DISC_ST_LISTEN discover state. - * @remain_on_channel: contains copy of struct used by cfg80211. - * @remain_on_channel_cookie: cookie counter for remain on channel cmd -@@ -133,7 +132,6 @@ struct brcmf_p2p_info { - u8 int_addr[ETH_ALEN]; - struct p2p_bss bss_idx[P2PAPI_BSSCFG_MAX]; - struct timer_list listen_timer; -- struct brcmf_ssid ssid; - u8 listen_channel; - struct ieee80211_channel remain_on_channel; - u32 remain_on_channel_cookie; diff --git a/package/kernel/mac80211/patches/376-0002-brcmfmac-Return-actual-error-by-fwil.patch b/package/kernel/mac80211/patches/376-0002-brcmfmac-Return-actual-error-by-fwil.patch deleted file mode 100644 index 8672c18f6b..0000000000 --- a/package/kernel/mac80211/patches/376-0002-brcmfmac-Return-actual-error-by-fwil.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:38 +0100 -Subject: [PATCH] brcmfmac: Return actual error by fwil. - -FWIL is always mapping back errors to EBADE. This is not very -conventient when trying to understand problems by reading logs. -Some callers print the error code, but that is quite useless -when the exact error code is not returned. It also makes it -impossible to differentiate based on error code. This patch -changes the return of EBADE into the actual error code. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c -@@ -126,7 +126,8 @@ brcmf_fil_cmd_data(struct brcmf_if *ifp, - - brcmf_dbg(FIL, "Failed: %s (%d)\n", - brcmf_fil_get_errstr((u32)(-err)), err); -- return -EBADE; -+ -+ return err; - } - - s32 diff --git a/package/kernel/mac80211/patches/376-0003-brcmfmac-Change-error-print-on-wlan0-existence.patch b/package/kernel/mac80211/patches/376-0003-brcmfmac-Change-error-print-on-wlan0-existence.patch deleted file mode 100644 index 1cfab2157d..0000000000 --- a/package/kernel/mac80211/patches/376-0003-brcmfmac-Change-error-print-on-wlan0-existence.patch +++ /dev/null @@ -1,41 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:39 +0100 -Subject: [PATCH] brcmfmac: Change error print on wlan0 existence. - -During initialization of the device, but also on some other -moments the driver prints an error that the netdev already exists. -This is a result of the way the driver is initializing the -firmware and not really an error. The code is not treating it as -an error either. This error print has resulted in many questions -by users and is confusing and incorrect. This patch changes the -error log into a debug info log. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -811,14 +811,15 @@ struct brcmf_if *brcmf_add_if(struct brc - * in case we missed the BRCMF_E_IF_DEL event. - */ - if (ifp) { -- brcmf_err("ERROR: netdev:%s already exists\n", -- ifp->ndev->name); - if (ifidx) { -+ brcmf_err("ERROR: netdev:%s already exists\n", -+ ifp->ndev->name); - netif_stop_queue(ifp->ndev); - brcmf_net_detach(ifp->ndev); - drvr->iflist[bsscfgidx] = NULL; - } else { -- brcmf_err("ignore IF event\n"); -+ brcmf_dbg(INFO, "netdev:%s ignore IF event\n", -+ ifp->ndev->name); - return ERR_PTR(-EINVAL); - } - } diff --git a/package/kernel/mac80211/patches/376-0004-brcmfmac-no-retries-on-rxglom-superframe-errors.patch b/package/kernel/mac80211/patches/376-0004-brcmfmac-no-retries-on-rxglom-superframe-errors.patch deleted file mode 100644 index dfc3a983bd..0000000000 --- a/package/kernel/mac80211/patches/376-0004-brcmfmac-no-retries-on-rxglom-superframe-errors.patch +++ /dev/null @@ -1,76 +0,0 @@ -From: Franky Lin <frankyl@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:40 +0100 -Subject: [PATCH] brcmfmac: no retries on rxglom superframe errors - -Aborting the current read attempt on the superframe also removes the -packet from the pipeline. Retries should not be attempted on the next -packet since it would not be a superframe(either a superframe descriptor -or other data packet) and should not be handled by brcmf_sdio_rxglom - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Signed-off-by: Franky Lin <frankyl@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -460,7 +460,6 @@ struct brcmf_sdio { - - struct sk_buff *glomd; /* Packet containing glomming descriptor */ - struct sk_buff_head glom; /* Packet list for glommed superframe */ -- uint glomerr; /* Glom packet read errors */ - - u8 *rxbuf; /* Buffer for receiving control packets */ - uint rxblen; /* Allocated length of rxbuf */ -@@ -1654,20 +1653,15 @@ static u8 brcmf_sdio_rxglom(struct brcmf - sdio_release_host(bus->sdiodev->func[1]); - bus->sdcnt.f2rxdata++; - -- /* On failure, kill the superframe, allow a couple retries */ -+ /* On failure, kill the superframe */ - if (errcode < 0) { - brcmf_err("glom read of %d bytes failed: %d\n", - dlen, errcode); - - sdio_claim_host(bus->sdiodev->func[1]); -- if (bus->glomerr++ < 3) { -- brcmf_sdio_rxfail(bus, true, true); -- } else { -- bus->glomerr = 0; -- brcmf_sdio_rxfail(bus, true, false); -- bus->sdcnt.rxglomfail++; -- brcmf_sdio_free_glom(bus); -- } -+ brcmf_sdio_rxfail(bus, true, false); -+ bus->sdcnt.rxglomfail++; -+ brcmf_sdio_free_glom(bus); - sdio_release_host(bus->sdiodev->func[1]); - return 0; - } -@@ -1708,19 +1702,11 @@ static u8 brcmf_sdio_rxglom(struct brcmf - } - - if (errcode) { -- /* Terminate frame on error, request -- a couple retries */ -+ /* Terminate frame on error */ - sdio_claim_host(bus->sdiodev->func[1]); -- if (bus->glomerr++ < 3) { -- /* Restore superframe header space */ -- skb_push(pfirst, sfdoff); -- brcmf_sdio_rxfail(bus, true, true); -- } else { -- bus->glomerr = 0; -- brcmf_sdio_rxfail(bus, true, false); -- bus->sdcnt.rxglomfail++; -- brcmf_sdio_free_glom(bus); -- } -+ brcmf_sdio_rxfail(bus, true, false); -+ bus->sdcnt.rxglomfail++; -+ brcmf_sdio_free_glom(bus); - sdio_release_host(bus->sdiodev->func[1]); - bus->cur_read.len = 0; - return 0; diff --git a/package/kernel/mac80211/patches/376-0005-brcmfmac-Remove-redundant-parameter-action-from-scan.patch b/package/kernel/mac80211/patches/376-0005-brcmfmac-Remove-redundant-parameter-action-from-scan.patch deleted file mode 100644 index ede1f47984..0000000000 --- a/package/kernel/mac80211/patches/376-0005-brcmfmac-Remove-redundant-parameter-action-from-scan.patch +++ /dev/null @@ -1,108 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:41 +0100 -Subject: [PATCH] brcmfmac: Remove redundant parameter action from scan. - -ESCAN is always performed using action start scan. No need to -pass this parameter on to different functions. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -945,7 +945,7 @@ static void brcmf_escan_prep(struct brcm - - static s32 - brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp, -- struct cfg80211_scan_request *request, u16 action) -+ struct cfg80211_scan_request *request) - { - s32 params_size = BRCMF_SCAN_PARAMS_FIXED_SIZE + - offsetof(struct brcmf_escan_params_le, params_le); -@@ -970,7 +970,7 @@ brcmf_run_escan(struct brcmf_cfg80211_in - BUG_ON(params_size + sizeof("escan") >= BRCMF_DCMD_MEDLEN); - brcmf_escan_prep(cfg, ¶ms->params_le, request); - params->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION); -- params->action = cpu_to_le16(action); -+ params->action = cpu_to_le16(WL_ESCAN_ACTION_START); - params->sync_id = cpu_to_le16(0x1234); - - err = brcmf_fil_iovar_data_set(ifp, "escan", params, params_size); -@@ -1012,7 +1012,7 @@ brcmf_do_escan(struct brcmf_cfg80211_inf - results->count = 0; - results->buflen = WL_ESCAN_RESULTS_FIXED_SIZE; - -- err = escan->run(cfg, ifp, request, WL_ESCAN_ACTION_START); -+ err = escan->run(cfg, ifp, request); - if (err) - brcmf_scan_config_mpc(ifp, 1); - return err; ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -@@ -231,7 +231,7 @@ struct escan_info { - struct wiphy *wiphy; - struct brcmf_if *ifp; - s32 (*run)(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp, -- struct cfg80211_scan_request *request, u16 action); -+ struct cfg80211_scan_request *request); - }; - - /** ---- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c -@@ -625,11 +625,10 @@ exit: - * @num_chans: number of channels to scan. - * @chanspecs: channel parameters for @num_chans channels. - * @search_state: P2P discover state to use. -- * @action: scan action to pass to firmware. - * @bss_type: type of P2P bss. - */ - static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans, -- u16 chanspecs[], s32 search_state, u16 action, -+ u16 chanspecs[], s32 search_state, - enum p2p_bss_type bss_type) - { - s32 ret = 0; -@@ -738,7 +737,7 @@ static s32 brcmf_p2p_escan(struct brcmf_ - - /* set the escan specific parameters */ - p2p_params->eparams.version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION); -- p2p_params->eparams.action = cpu_to_le16(action); -+ p2p_params->eparams.action = cpu_to_le16(WL_ESCAN_ACTION_START); - p2p_params->eparams.sync_id = cpu_to_le16(0x1234); - /* perform p2p scan on primary device */ - ret = brcmf_fil_bsscfg_data_set(vif->ifp, "p2p_scan", memblk, memsize); -@@ -762,8 +761,7 @@ exit: - */ - static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg, - struct brcmf_if *ifp, -- struct cfg80211_scan_request *request, -- u16 action) -+ struct cfg80211_scan_request *request) - { - struct brcmf_p2p_info *p2p = &cfg->p2p; - s32 err = 0; -@@ -823,7 +821,7 @@ static s32 brcmf_p2p_run_escan(struct br - num_nodfs++; - } - err = brcmf_p2p_escan(p2p, num_nodfs, chanspecs, search_state, -- action, P2PAPI_BSSCFG_DEVICE); -+ P2PAPI_BSSCFG_DEVICE); - kfree(chanspecs); - } - exit: -@@ -1092,8 +1090,7 @@ static s32 brcmf_p2p_act_frm_search(stru - default_chan_list[2] = ch.chspec; - } - err = brcmf_p2p_escan(p2p, channel_cnt, default_chan_list, -- WL_P2P_DISC_ST_SEARCH, WL_ESCAN_ACTION_START, -- P2PAPI_BSSCFG_DEVICE); -+ WL_P2P_DISC_ST_SEARCH, P2PAPI_BSSCFG_DEVICE); - kfree(default_chan_list); - exit: - return err; diff --git a/package/kernel/mac80211/patches/376-0006-brcmfmac-Cleanup-roaming-configuration.patch b/package/kernel/mac80211/patches/376-0006-brcmfmac-Cleanup-roaming-configuration.patch deleted file mode 100644 index 41b8770dbd..0000000000 --- a/package/kernel/mac80211/patches/376-0006-brcmfmac-Cleanup-roaming-configuration.patch +++ /dev/null @@ -1,180 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:42 +0100 -Subject: [PATCH] brcmfmac: Cleanup roaming configuration. - -Put all roaming configuration related code in one place and -configure timeout based upon roaming setting. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -4755,7 +4755,6 @@ struct brcmf_cfg80211_vif *brcmf_alloc_v - vif->wdev.iftype = type; - - vif->pm_block = pm_block; -- vif->roam_off = -1; - - brcmf_init_prof(&vif->profile); - -@@ -5305,35 +5304,33 @@ static void init_vif_event(struct brcmf_ - mutex_init(&event->vif_event_lock); - } - --static s32 --brcmf_dongle_roam(struct brcmf_if *ifp, u32 bcn_timeout) -+static s32 brcmf_dongle_roam(struct brcmf_if *ifp) - { -- s32 err = 0; -+ s32 err; -+ u32 bcn_timeout; - __le32 roamtrigger[2]; - __le32 roam_delta[2]; - -- /* -- * Setup timeout if Beacons are lost and roam is -- * off to report link down -- */ -- if (brcmf_roamoff) { -- err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout); -- if (err) { -- brcmf_err("bcn_timeout error (%d)\n", err); -- goto dongle_rom_out; -- } -+ /* Configure beacon timeout value based upon roaming setting */ -+ if (brcmf_roamoff) -+ bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF; -+ else -+ bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON; -+ err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout); -+ if (err) { -+ brcmf_err("bcn_timeout error (%d)\n", err); -+ goto roam_setup_done; - } - -- /* -- * Enable/Disable built-in roaming to allow supplicant -- * to take care of roaming -+ /* Enable/Disable built-in roaming to allow supplicant to take care of -+ * roaming. - */ - brcmf_dbg(INFO, "Internal Roaming = %s\n", - brcmf_roamoff ? "Off" : "On"); - err = brcmf_fil_iovar_int_set(ifp, "roam_off", !!(brcmf_roamoff)); - if (err) { - brcmf_err("roam_off error (%d)\n", err); -- goto dongle_rom_out; -+ goto roam_setup_done; - } - - roamtrigger[0] = cpu_to_le32(WL_ROAM_TRIGGER_LEVEL); -@@ -5342,7 +5339,7 @@ brcmf_dongle_roam(struct brcmf_if *ifp, - (void *)roamtrigger, sizeof(roamtrigger)); - if (err) { - brcmf_err("WLC_SET_ROAM_TRIGGER error (%d)\n", err); -- goto dongle_rom_out; -+ goto roam_setup_done; - } - - roam_delta[0] = cpu_to_le32(WL_ROAM_DELTA); -@@ -5351,10 +5348,10 @@ brcmf_dongle_roam(struct brcmf_if *ifp, - (void *)roam_delta, sizeof(roam_delta)); - if (err) { - brcmf_err("WLC_SET_ROAM_DELTA error (%d)\n", err); -- goto dongle_rom_out; -+ goto roam_setup_done; - } - --dongle_rom_out: -+roam_setup_done: - return err; - } - -@@ -6069,7 +6066,7 @@ static s32 brcmf_config_dongle(struct br - brcmf_dbg(INFO, "power save set to %s\n", - (power_mode ? "enabled" : "disabled")); - -- err = brcmf_dongle_roam(ifp, WL_BEACON_TIMEOUT); -+ err = brcmf_dongle_roam(ifp); - if (err) - goto default_conf_out; - err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype, ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.h -@@ -28,7 +28,6 @@ - #define WL_EXTRA_BUF_MAX 2048 - #define WL_ROAM_TRIGGER_LEVEL -75 - #define WL_ROAM_DELTA 20 --#define WL_BEACON_TIMEOUT 3 - - #define WL_SCAN_CHANNEL_TIME 40 - #define WL_SCAN_UNASSOC_TIME 40 -@@ -77,6 +76,9 @@ - - #define BRCMF_MAX_DEFAULT_KEYS 4 - -+/* beacon loss timeout defaults */ -+#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON 2 -+#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF 4 - - /** - * enum brcmf_scan_status - scan engine status -@@ -178,7 +180,6 @@ struct vif_saved_ie { - * @ifp: lower layer interface pointer - * @wdev: wireless device. - * @profile: profile information. -- * @roam_off: roaming state. - * @sme_state: SME state using enum brcmf_vif_status bits. - * @pm_block: power-management blocked. - * @list: linked list. -@@ -189,7 +190,6 @@ struct brcmf_cfg80211_vif { - struct brcmf_if *ifp; - struct wireless_dev wdev; - struct brcmf_cfg80211_profile profile; -- s32 roam_off; - unsigned long sme_state; - bool pm_block; - struct vif_saved_ie saved_ie; ---- a/drivers/net/wireless/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/common.c -@@ -29,7 +29,6 @@ - - const u8 ALLFFMAC[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - --#define BRCMF_DEFAULT_BCN_TIMEOUT 3 - #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40 - #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40 - -@@ -107,26 +106,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_i - goto done; - } - -- /* -- * Setup timeout if Beacons are lost and roam is off to report -- * link down -- */ -- err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", -- BRCMF_DEFAULT_BCN_TIMEOUT); -- if (err) { -- brcmf_err("bcn_timeout error (%d)\n", err); -- goto done; -- } -- -- /* Enable/Disable build-in roaming to allowed ext supplicant to take -- * of romaing -- */ -- err = brcmf_fil_iovar_int_set(ifp, "roam_off", 1); -- if (err) { -- brcmf_err("roam_off error (%d)\n", err); -- goto done; -- } -- - /* Setup join_pref to select target by RSSI(with boost on 5GHz) */ - join_pref_params[0].type = BRCMF_JOIN_PREF_RSSI_DELTA; - join_pref_params[0].len = 2; diff --git a/package/kernel/mac80211/patches/376-0007-brcmfmac-Add-beamforming-support.patch b/package/kernel/mac80211/patches/376-0007-brcmfmac-Add-beamforming-support.patch deleted file mode 100644 index 395166beed..0000000000 --- a/package/kernel/mac80211/patches/376-0007-brcmfmac-Add-beamforming-support.patch +++ /dev/null @@ -1,115 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:43 +0100 -Subject: [PATCH] brcmfmac: Add beamforming support. - -Some devices support beamforming. This patch enables tx beamforming -if supported and reports beamforming capabilities per channel if -supported. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -5671,7 +5671,8 @@ static __le16 brcmf_get_mcs_map(u32 ncha - } - - static void brcmf_update_vht_cap(struct ieee80211_supported_band *band, -- u32 bw_cap[2], u32 nchain) -+ u32 bw_cap[2], u32 nchain, u32 txstreams, -+ u32 txbf_bfe_cap, u32 txbf_bfr_cap) - { - __le16 mcs_map; - -@@ -5690,6 +5691,25 @@ static void brcmf_update_vht_cap(struct - mcs_map = brcmf_get_mcs_map(nchain, IEEE80211_VHT_MCS_SUPPORT_0_9); - band->vht_cap.vht_mcs.rx_mcs_map = mcs_map; - band->vht_cap.vht_mcs.tx_mcs_map = mcs_map; -+ -+ /* Beamforming support information */ -+ if (txbf_bfe_cap & BRCMF_TXBF_SU_BFE_CAP) -+ band->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE; -+ if (txbf_bfe_cap & BRCMF_TXBF_MU_BFE_CAP) -+ band->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; -+ if (txbf_bfr_cap & BRCMF_TXBF_SU_BFR_CAP) -+ band->vht_cap.cap |= IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE; -+ if (txbf_bfr_cap & BRCMF_TXBF_MU_BFR_CAP) -+ band->vht_cap.cap |= IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE; -+ -+ if ((txbf_bfe_cap || txbf_bfr_cap) && (txstreams > 1)) { -+ band->vht_cap.cap |= -+ (2 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT); -+ band->vht_cap.cap |= ((txstreams - 1) << -+ IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT); -+ band->vht_cap.cap |= -+ IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB; -+ } - } - - static int brcmf_setup_wiphybands(struct wiphy *wiphy) -@@ -5704,6 +5724,9 @@ static int brcmf_setup_wiphybands(struct - int err; - s32 i; - struct ieee80211_supported_band *band; -+ u32 txstreams = 0; -+ u32 txbf_bfe_cap = 0; -+ u32 txbf_bfr_cap = 0; - - (void)brcmf_fil_iovar_int_get(ifp, "vhtmode", &vhtmode); - err = brcmf_fil_iovar_int_get(ifp, "nmode", &nmode); -@@ -5732,6 +5755,14 @@ static int brcmf_setup_wiphybands(struct - return err; - } - -+ if (vhtmode) { -+ (void)brcmf_fil_iovar_int_get(ifp, "txstreams", &txstreams); -+ (void)brcmf_fil_iovar_int_get(ifp, "txbf_bfe_cap", -+ &txbf_bfe_cap); -+ (void)brcmf_fil_iovar_int_get(ifp, "txbf_bfr_cap", -+ &txbf_bfr_cap); -+ } -+ - wiphy = cfg_to_wiphy(cfg); - for (i = 0; i < ARRAY_SIZE(wiphy->bands); i++) { - band = wiphy->bands[i]; -@@ -5741,7 +5772,8 @@ static int brcmf_setup_wiphybands(struct - if (nmode) - brcmf_update_ht_cap(band, bw_cap, nchain); - if (vhtmode) -- brcmf_update_vht_cap(band, bw_cap, nchain); -+ brcmf_update_vht_cap(band, bw_cap, nchain, txstreams, -+ txbf_bfe_cap, txbf_bfr_cap); - } - - return 0; ---- a/drivers/net/wireless/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/common.c -@@ -153,6 +153,9 @@ int brcmf_c_preinit_dcmds(struct brcmf_i - goto done; - } - -+ /* Enable tx beamforming, errors can be ignored (not supported) */ -+ (void)brcmf_fil_iovar_int_set(ifp, "txbf", 1); -+ - /* do bus specific preinit here */ - err = brcmf_bus_preinit(ifp->drvr->bus_if); - done: ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h -@@ -121,6 +121,11 @@ - - #define BRCMF_MAX_ASSOCLIST 128 - -+#define BRCMF_TXBF_SU_BFE_CAP BIT(0) -+#define BRCMF_TXBF_MU_BFE_CAP BIT(1) -+#define BRCMF_TXBF_SU_BFR_CAP BIT(0) -+#define BRCMF_TXBF_MU_BFR_CAP BIT(1) -+ - /* join preference types for join_pref iovar */ - enum brcmf_join_pref_types { - BRCMF_JOIN_PREF_RSSI = 1, diff --git a/package/kernel/mac80211/patches/376-0008-brcmfmac-assure-net_ratelimit-is-declared-before-use.patch b/package/kernel/mac80211/patches/376-0008-brcmfmac-assure-net_ratelimit-is-declared-before-use.patch deleted file mode 100644 index d471eb54e0..0000000000 --- a/package/kernel/mac80211/patches/376-0008-brcmfmac-assure-net_ratelimit-is-declared-before-use.patch +++ /dev/null @@ -1,25 +0,0 @@ -From: Arend van Spriel <arend@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:45 +0100 -Subject: [PATCH] brcmfmac: assure net_ratelimit() is declared before use - -Under some kernel configuration we get build issue with implicit -declaration of net_ratelimit() function. Fix this by explicitly -including the file providing the prototype. - -Reviewed-by: Hante Meuleman <meuleman@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h -@@ -17,6 +17,8 @@ - #ifndef BRCMFMAC_DEBUG_H - #define BRCMFMAC_DEBUG_H - -+#include <linux/net.h> /* net_ratelimit() */ -+ - /* message levels */ - #define BRCMF_TRACE_VAL 0x00000002 - #define BRCMF_INFO_VAL 0x00000004 diff --git a/package/kernel/mac80211/patches/376-0009-brcmfmac-Unify-methods-to-define-and-map-firmware-fi.patch b/package/kernel/mac80211/patches/376-0009-brcmfmac-Unify-methods-to-define-and-map-firmware-fi.patch deleted file mode 100644 index 0ec9d10301..0000000000 --- a/package/kernel/mac80211/patches/376-0009-brcmfmac-Unify-methods-to-define-and-map-firmware-fi.patch +++ /dev/null @@ -1,664 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:46 +0100 -Subject: [PATCH] brcmfmac: Unify methods to define and map firmware files. - -All bus drivers (sdio, usb and pcie) require firmware files which -needs to be downloaded to the device, The definitions and mapping -of device id and revision to firmware and nvram file is done by -each bus driver. This patch creates common functions and defines -to simplify and unify the definition of these firmware and nvram -files and mapping. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -27,9 +27,9 @@ - #define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */ - #define BRCMF_FW_NVRAM_PCIEDEV_LEN 10 /* pcie/1/4/ + \0 */ - --char brcmf_firmware_path[BRCMF_FW_PATH_LEN]; -+static char brcmf_firmware_path[BRCMF_FW_NAME_LEN]; - module_param_string(alternative_fw_path, brcmf_firmware_path, -- BRCMF_FW_PATH_LEN, 0440); -+ BRCMF_FW_NAME_LEN, 0440); - - enum nvram_parser_state { - IDLE, -@@ -531,3 +531,43 @@ int brcmf_fw_get_firmwares(struct device - 0); - } - -+int brcmf_fw_map_chip_to_name(u32 chip, u32 chiprev, -+ struct brcmf_firmware_mapping mapping_table[], -+ u32 table_size, char fw_name[BRCMF_FW_NAME_LEN], -+ char nvram_name[BRCMF_FW_NAME_LEN]) -+{ -+ u32 i; -+ char end; -+ -+ for (i = 0; i < table_size; i++) { -+ if (mapping_table[i].chipid == chip && -+ mapping_table[i].revmask & BIT(chiprev)) -+ break; -+ } -+ -+ if (i == table_size) { -+ brcmf_err("Unknown chipid %d [%d]\n", chip, chiprev); -+ return -ENODEV; -+ } -+ -+ /* check if firmware path is provided by module parameter */ -+ if (brcmf_firmware_path[0] != '\0') { -+ strlcpy(fw_name, brcmf_firmware_path, BRCMF_FW_NAME_LEN); -+ if ((nvram_name) && (mapping_table[i].nvram)) -+ strlcpy(nvram_name, brcmf_firmware_path, -+ BRCMF_FW_NAME_LEN); -+ -+ end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1]; -+ if (end != '/') { -+ strlcat(fw_name, "/", BRCMF_FW_NAME_LEN); -+ if ((nvram_name) && (mapping_table[i].nvram)) -+ strlcat(nvram_name, "/", BRCMF_FW_NAME_LEN); -+ } -+ } -+ strlcat(fw_name, mapping_table[i].fw, BRCMF_FW_NAME_LEN); -+ if ((nvram_name) && (mapping_table[i].nvram)) -+ strlcat(nvram_name, mapping_table[i].nvram, BRCMF_FW_NAME_LEN); -+ -+ return 0; -+} -+ ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h -@@ -21,11 +21,51 @@ - #define BRCMF_FW_REQ_FLAGS 0x00F0 - #define BRCMF_FW_REQ_NV_OPTIONAL 0x0010 - --#define BRCMF_FW_PATH_LEN 256 --#define BRCMF_FW_NAME_LEN 32 -+#define BRCMF_FW_NAME_LEN 320 - --extern char brcmf_firmware_path[]; -+#define BRCMF_FW_DEFAULT_PATH "brcm/" - -+/** -+ * struct brcmf_firmware_mapping - Used to map chipid/revmask to firmware -+ * filename and nvram filename. Each bus type implementation should create -+ * a table of firmware mappings (using the macros defined below). -+ * -+ * @chipid: ID of chip. -+ * @revmask: bitmask of revisions, e.g. 0x10 means rev 4 only, 0xf means rev 0-3 -+ * @fw: name of the firmware file. -+ * @nvram: name of nvram file. -+ */ -+struct brcmf_firmware_mapping { -+ u32 chipid; -+ u32 revmask; -+ const char *fw; -+ const char *nvram; -+}; -+ -+#define BRCMF_FW_NVRAM_DEF(fw_nvram_name, fw, nvram) \ -+static const char BRCM_ ## fw_nvram_name ## _FIRMWARE_NAME[] = \ -+ BRCMF_FW_DEFAULT_PATH fw; \ -+static const char BRCM_ ## fw_nvram_name ## _NVRAM_NAME[] = \ -+ BRCMF_FW_DEFAULT_PATH nvram; \ -+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH fw); \ -+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH nvram) -+ -+#define BRCMF_FW_DEF(fw_name, fw) \ -+static const char BRCM_ ## fw_name ## _FIRMWARE_NAME[] = \ -+ BRCMF_FW_DEFAULT_PATH fw; \ -+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH fw) \ -+ -+#define BRCMF_FW_NVRAM_ENTRY(chipid, mask, name) \ -+ { chipid, mask, \ -+ BRCM_ ## name ## _FIRMWARE_NAME, BRCM_ ## name ## _NVRAM_NAME } -+ -+#define BRCMF_FW_ENTRY(chipid, mask, name) \ -+ { chipid, mask, BRCM_ ## name ## _FIRMWARE_NAME, NULL } -+ -+int brcmf_fw_map_chip_to_name(u32 chip, u32 chiprev, -+ struct brcmf_firmware_mapping mapping_table[], -+ u32 table_size, char fw_name[BRCMF_FW_NAME_LEN], -+ char nvram_name[BRCMF_FW_NAME_LEN]); - void brcmf_fw_nvram_free(void *nvram); - /* - * Request firmware(s) asynchronously. When the asynchronous request ---- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c -@@ -44,25 +44,29 @@ enum brcmf_pcie_state { - BRCMFMAC_PCIE_STATE_UP - }; - -- --#define BRCMF_PCIE_43602_FW_NAME "brcm/brcmfmac43602-pcie.bin" --#define BRCMF_PCIE_43602_NVRAM_NAME "brcm/brcmfmac43602-pcie.txt" --#define BRCMF_PCIE_4350_FW_NAME "brcm/brcmfmac4350-pcie.bin" --#define BRCMF_PCIE_4350_NVRAM_NAME "brcm/brcmfmac4350-pcie.txt" --#define BRCMF_PCIE_4356_FW_NAME "brcm/brcmfmac4356-pcie.bin" --#define BRCMF_PCIE_4356_NVRAM_NAME "brcm/brcmfmac4356-pcie.txt" --#define BRCMF_PCIE_43570_FW_NAME "brcm/brcmfmac43570-pcie.bin" --#define BRCMF_PCIE_43570_NVRAM_NAME "brcm/brcmfmac43570-pcie.txt" --#define BRCMF_PCIE_4358_FW_NAME "brcm/brcmfmac4358-pcie.bin" --#define BRCMF_PCIE_4358_NVRAM_NAME "brcm/brcmfmac4358-pcie.txt" --#define BRCMF_PCIE_4359_FW_NAME "brcm/brcmfmac4359-pcie.bin" --#define BRCMF_PCIE_4359_NVRAM_NAME "brcm/brcmfmac4359-pcie.txt" --#define BRCMF_PCIE_4365_FW_NAME "brcm/brcmfmac4365b-pcie.bin" --#define BRCMF_PCIE_4365_NVRAM_NAME "brcm/brcmfmac4365b-pcie.txt" --#define BRCMF_PCIE_4366_FW_NAME "brcm/brcmfmac4366b-pcie.bin" --#define BRCMF_PCIE_4366_NVRAM_NAME "brcm/brcmfmac4366b-pcie.txt" --#define BRCMF_PCIE_4371_FW_NAME "brcm/brcmfmac4371-pcie.bin" --#define BRCMF_PCIE_4371_NVRAM_NAME "brcm/brcmfmac4371-pcie.txt" -+BRCMF_FW_NVRAM_DEF(43602, "brcmfmac43602-pcie.bin", "brcmfmac43602-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(4350, "brcmfmac4350-pcie.bin", "brcmfmac4350-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(4356, "brcmfmac4356-pcie.bin", "brcmfmac4356-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(43570, "brcmfmac43570-pcie.bin", "brcmfmac43570-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(4358, "brcmfmac4358-pcie.bin", "brcmfmac4358-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(4359, "brcmfmac4359-pcie.bin", "brcmfmac4359-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(4365B, "brcmfmac4365b-pcie.bin", "brcmfmac4365b-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(4366B, "brcmfmac4366b-pcie.bin", "brcmfmac4366b-pcie.txt"); -+BRCMF_FW_NVRAM_DEF(4371, "brcmfmac4371-pcie.bin", "brcmfmac4371-pcie.txt"); -+ -+static struct brcmf_firmware_mapping brcmf_pcie_fwnames[] = { -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43602_CHIP_ID, 0xFFFFFFFF, 43602), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4350_CHIP_ID, 0xFFFFFFFF, 4350), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43567_CHIP_ID, 0xFFFFFFFF, 43570), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43569_CHIP_ID, 0xFFFFFFFF, 43570), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43570_CHIP_ID, 0xFFFFFFFF, 43570), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4358_CHIP_ID, 0xFFFFFFFF, 4358), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4359_CHIP_ID, 0xFFFFFFFF, 4359), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4365_CHIP_ID, 0xFFFFFFFF, 4365B), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4366_CHIP_ID, 0xFFFFFFFF, 4366B), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4371_CHIP_ID, 0xFFFFFFFF, 4371), -+}; - - #define BRCMF_PCIE_FW_UP_TIMEOUT 2000 /* msec */ - -@@ -202,26 +206,6 @@ enum brcmf_pcie_state { - #define BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB 3 - - --MODULE_FIRMWARE(BRCMF_PCIE_43602_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_43602_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4350_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4350_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4359_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4359_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4365_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4365_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4366_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4366_NVRAM_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4371_FW_NAME); --MODULE_FIRMWARE(BRCMF_PCIE_4371_NVRAM_NAME); -- -- - struct brcmf_pcie_console { - u32 base_addr; - u32 buf_addr; -@@ -258,8 +242,8 @@ struct brcmf_pciedev_info { - enum brcmf_pcie_state state; - bool in_irq; - struct pci_dev *pdev; -- char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN]; -- char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN]; -+ char fw_name[BRCMF_FW_NAME_LEN]; -+ char nvram_name[BRCMF_FW_NAME_LEN]; - void __iomem *regs; - void __iomem *tcm; - u32 tcm_size; -@@ -1478,84 +1462,6 @@ brcmf_pcie_init_share_ram_info(struct br - } - - --static int brcmf_pcie_get_fwnames(struct brcmf_pciedev_info *devinfo) --{ -- char *fw_name; -- char *nvram_name; -- uint fw_len, nv_len; -- char end; -- -- brcmf_dbg(PCIE, "Enter, chip 0x%04x chiprev %d\n", devinfo->ci->chip, -- devinfo->ci->chiprev); -- -- switch (devinfo->ci->chip) { -- case BRCM_CC_43602_CHIP_ID: -- fw_name = BRCMF_PCIE_43602_FW_NAME; -- nvram_name = BRCMF_PCIE_43602_NVRAM_NAME; -- break; -- case BRCM_CC_4350_CHIP_ID: -- fw_name = BRCMF_PCIE_4350_FW_NAME; -- nvram_name = BRCMF_PCIE_4350_NVRAM_NAME; -- break; -- case BRCM_CC_4356_CHIP_ID: -- fw_name = BRCMF_PCIE_4356_FW_NAME; -- nvram_name = BRCMF_PCIE_4356_NVRAM_NAME; -- break; -- case BRCM_CC_43567_CHIP_ID: -- case BRCM_CC_43569_CHIP_ID: -- case BRCM_CC_43570_CHIP_ID: -- fw_name = BRCMF_PCIE_43570_FW_NAME; -- nvram_name = BRCMF_PCIE_43570_NVRAM_NAME; -- break; -- case BRCM_CC_4358_CHIP_ID: -- fw_name = BRCMF_PCIE_4358_FW_NAME; -- nvram_name = BRCMF_PCIE_4358_NVRAM_NAME; -- break; -- case BRCM_CC_4359_CHIP_ID: -- fw_name = BRCMF_PCIE_4359_FW_NAME; -- nvram_name = BRCMF_PCIE_4359_NVRAM_NAME; -- break; -- case BRCM_CC_4365_CHIP_ID: -- fw_name = BRCMF_PCIE_4365_FW_NAME; -- nvram_name = BRCMF_PCIE_4365_NVRAM_NAME; -- break; -- case BRCM_CC_4366_CHIP_ID: -- fw_name = BRCMF_PCIE_4366_FW_NAME; -- nvram_name = BRCMF_PCIE_4366_NVRAM_NAME; -- break; -- case BRCM_CC_4371_CHIP_ID: -- fw_name = BRCMF_PCIE_4371_FW_NAME; -- nvram_name = BRCMF_PCIE_4371_NVRAM_NAME; -- break; -- default: -- brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip); -- return -ENODEV; -- } -- -- fw_len = sizeof(devinfo->fw_name) - 1; -- nv_len = sizeof(devinfo->nvram_name) - 1; -- /* check if firmware path is provided by module parameter */ -- if (brcmf_firmware_path[0] != '\0') { -- strncpy(devinfo->fw_name, brcmf_firmware_path, fw_len); -- strncpy(devinfo->nvram_name, brcmf_firmware_path, nv_len); -- fw_len -= strlen(devinfo->fw_name); -- nv_len -= strlen(devinfo->nvram_name); -- -- end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1]; -- if (end != '/') { -- strncat(devinfo->fw_name, "/", fw_len); -- strncat(devinfo->nvram_name, "/", nv_len); -- fw_len--; -- nv_len--; -- } -- } -- strncat(devinfo->fw_name, fw_name, fw_len); -- strncat(devinfo->nvram_name, nvram_name, nv_len); -- -- return 0; --} -- -- - static int brcmf_pcie_download_fw_nvram(struct brcmf_pciedev_info *devinfo, - const struct firmware *fw, void *nvram, - u32 nvram_len) -@@ -1891,7 +1797,10 @@ brcmf_pcie_probe(struct pci_dev *pdev, c - bus->wowl_supported = pci_pme_capable(pdev, PCI_D3hot); - dev_set_drvdata(&pdev->dev, bus); - -- ret = brcmf_pcie_get_fwnames(devinfo); -+ ret = brcmf_fw_map_chip_to_name(devinfo->ci->chip, devinfo->ci->chiprev, -+ brcmf_pcie_fwnames, -+ ARRAY_SIZE(brcmf_pcie_fwnames), -+ devinfo->fw_name, devinfo->nvram_name); - if (ret) - goto fail_bus; - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c -@@ -596,136 +596,41 @@ static const struct sdiod_drive_str sdio - {4, 0x1} - }; - --#define BCM43143_FIRMWARE_NAME "brcm/brcmfmac43143-sdio.bin" --#define BCM43143_NVRAM_NAME "brcm/brcmfmac43143-sdio.txt" --#define BCM43241B0_FIRMWARE_NAME "brcm/brcmfmac43241b0-sdio.bin" --#define BCM43241B0_NVRAM_NAME "brcm/brcmfmac43241b0-sdio.txt" --#define BCM43241B4_FIRMWARE_NAME "brcm/brcmfmac43241b4-sdio.bin" --#define BCM43241B4_NVRAM_NAME "brcm/brcmfmac43241b4-sdio.txt" --#define BCM43241B5_FIRMWARE_NAME "brcm/brcmfmac43241b5-sdio.bin" --#define BCM43241B5_NVRAM_NAME "brcm/brcmfmac43241b5-sdio.txt" --#define BCM4329_FIRMWARE_NAME "brcm/brcmfmac4329-sdio.bin" --#define BCM4329_NVRAM_NAME "brcm/brcmfmac4329-sdio.txt" --#define BCM4330_FIRMWARE_NAME "brcm/brcmfmac4330-sdio.bin" --#define BCM4330_NVRAM_NAME "brcm/brcmfmac4330-sdio.txt" --#define BCM4334_FIRMWARE_NAME "brcm/brcmfmac4334-sdio.bin" --#define BCM4334_NVRAM_NAME "brcm/brcmfmac4334-sdio.txt" --#define BCM43340_FIRMWARE_NAME "brcm/brcmfmac43340-sdio.bin" --#define BCM43340_NVRAM_NAME "brcm/brcmfmac43340-sdio.txt" --#define BCM4335_FIRMWARE_NAME "brcm/brcmfmac4335-sdio.bin" --#define BCM4335_NVRAM_NAME "brcm/brcmfmac4335-sdio.txt" --#define BCM43362_FIRMWARE_NAME "brcm/brcmfmac43362-sdio.bin" --#define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt" --#define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin" --#define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt" --#define BCM43430_FIRMWARE_NAME "brcm/brcmfmac43430-sdio.bin" --#define BCM43430_NVRAM_NAME "brcm/brcmfmac43430-sdio.txt" --#define BCM43455_FIRMWARE_NAME "brcm/brcmfmac43455-sdio.bin" --#define BCM43455_NVRAM_NAME "brcm/brcmfmac43455-sdio.txt" --#define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin" --#define BCM4354_NVRAM_NAME "brcm/brcmfmac4354-sdio.txt" -- --MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM43143_NVRAM_NAME); --MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME); --MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME); --MODULE_FIRMWARE(BCM43241B5_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM43241B5_NVRAM_NAME); --MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM4329_NVRAM_NAME); --MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM4330_NVRAM_NAME); --MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM4334_NVRAM_NAME); --MODULE_FIRMWARE(BCM43340_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM43340_NVRAM_NAME); --MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM4335_NVRAM_NAME); --MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM43362_NVRAM_NAME); --MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM4339_NVRAM_NAME); --MODULE_FIRMWARE(BCM43430_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM43430_NVRAM_NAME); --MODULE_FIRMWARE(BCM43455_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM43455_NVRAM_NAME); --MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME); --MODULE_FIRMWARE(BCM4354_NVRAM_NAME); -- --struct brcmf_firmware_names { -- u32 chipid; -- u32 revmsk; -- const char *bin; -- const char *nv; -+BRCMF_FW_NVRAM_DEF(43143, "brcmfmac43143-sdio.bin", "brcmfmac43143-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(43241B0, "brcmfmac43241b0-sdio.bin", -+ "brcmfmac43241b0-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(43241B4, "brcmfmac43241b4-sdio.bin", -+ "brcmfmac43241b4-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(43241B5, "brcmfmac43241b5-sdio.bin", -+ "brcmfmac43241b5-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(4329, "brcmfmac4329-sdio.bin", "brcmfmac4329-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(4330, "brcmfmac4330-sdio.bin", "brcmfmac4330-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(4334, "brcmfmac4334-sdio.bin", "brcmfmac4334-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(43340, "brcmfmac43340-sdio.bin", "brcmfmac43340-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(4335, "brcmfmac4335-sdio.bin", "brcmfmac4335-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(43362, "brcmfmac43362-sdio.bin", "brcmfmac43362-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(4339, "brcmfmac4339-sdio.bin", "brcmfmac4339-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(43430, "brcmfmac43430-sdio.bin", "brcmfmac43430-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(43455, "brcmfmac43455-sdio.bin", "brcmfmac43455-sdio.txt"); -+BRCMF_FW_NVRAM_DEF(4354, "brcmfmac4354-sdio.bin", "brcmfmac4354-sdio.txt"); -+ -+static struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = { -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0x00000020, 43241B4), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, 43241B5), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, 4329), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, 43430), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455), -+ BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354) - }; - --enum brcmf_firmware_type { -- BRCMF_FIRMWARE_BIN, -- BRCMF_FIRMWARE_NVRAM --}; -- --#define BRCMF_FIRMWARE_NVRAM(name) \ -- name ## _FIRMWARE_NAME, name ## _NVRAM_NAME -- --static const struct brcmf_firmware_names brcmf_fwname_data[] = { -- { BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) }, -- { BRCM_CC_43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) }, -- { BRCM_CC_43241_CHIP_ID, 0x00000020, BRCMF_FIRMWARE_NVRAM(BCM43241B4) }, -- { BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43241B5) }, -- { BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) }, -- { BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) }, -- { BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, -- { BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43340) }, -- { BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, -- { BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, -- { BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }, -- { BRCM_CC_43430_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43430) }, -- { BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43455) }, -- { BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) } --}; -- --static int brcmf_sdio_get_fwnames(struct brcmf_chip *ci, -- struct brcmf_sdio_dev *sdiodev) --{ -- int i; -- char end; -- -- for (i = 0; i < ARRAY_SIZE(brcmf_fwname_data); i++) { -- if (brcmf_fwname_data[i].chipid == ci->chip && -- brcmf_fwname_data[i].revmsk & BIT(ci->chiprev)) -- break; -- } -- -- if (i == ARRAY_SIZE(brcmf_fwname_data)) { -- brcmf_err("Unknown chipid %d [%d]\n", ci->chip, ci->chiprev); -- return -ENODEV; -- } -- -- /* check if firmware path is provided by module parameter */ -- if (brcmf_firmware_path[0] != '\0') { -- strlcpy(sdiodev->fw_name, brcmf_firmware_path, -- sizeof(sdiodev->fw_name)); -- strlcpy(sdiodev->nvram_name, brcmf_firmware_path, -- sizeof(sdiodev->nvram_name)); -- -- end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1]; -- if (end != '/') { -- strlcat(sdiodev->fw_name, "/", -- sizeof(sdiodev->fw_name)); -- strlcat(sdiodev->nvram_name, "/", -- sizeof(sdiodev->nvram_name)); -- } -- } -- strlcat(sdiodev->fw_name, brcmf_fwname_data[i].bin, -- sizeof(sdiodev->fw_name)); -- strlcat(sdiodev->nvram_name, brcmf_fwname_data[i].nv, -- sizeof(sdiodev->nvram_name)); -- -- return 0; --} -- - static void pkt_align(struct sk_buff *p, int len, int align) - { - uint datalign; -@@ -4252,7 +4157,10 @@ struct brcmf_sdio *brcmf_sdio_probe(stru - brcmf_sdio_debugfs_create(bus); - brcmf_dbg(INFO, "completed!!\n"); - -- ret = brcmf_sdio_get_fwnames(bus->ci, sdiodev); -+ ret = brcmf_fw_map_chip_to_name(bus->ci->chip, bus->ci->chiprev, -+ brcmf_sdio_fwnames, -+ ARRAY_SIZE(brcmf_sdio_fwnames), -+ sdiodev->fw_name, sdiodev->nvram_name); - if (ret) - goto fail; - ---- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h -@@ -195,8 +195,8 @@ struct brcmf_sdio_dev { - uint max_segment_size; - uint txglomsz; - struct sg_table sgtable; -- char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN]; -- char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN]; -+ char fw_name[BRCMF_FW_NAME_LEN]; -+ char nvram_name[BRCMF_FW_NAME_LEN]; - bool wowl_enabled; - enum brcmf_sdiod_state state; - struct brcmf_sdiod_freezer *freezer; ---- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c -@@ -43,10 +43,20 @@ - #define BRCMF_USB_CBCTL_READ 1 - #define BRCMF_USB_MAX_PKT_SIZE 1600 - --#define BRCMF_USB_43143_FW_NAME "brcm/brcmfmac43143.bin" --#define BRCMF_USB_43236_FW_NAME "brcm/brcmfmac43236b.bin" --#define BRCMF_USB_43242_FW_NAME "brcm/brcmfmac43242a.bin" --#define BRCMF_USB_43569_FW_NAME "brcm/brcmfmac43569.bin" -+BRCMF_FW_DEF(43143, "brcmfmac43143.bin"); -+BRCMF_FW_DEF(43236B, "brcmfmac43236b.bin"); -+BRCMF_FW_DEF(43242A, "brcmfmac43242a.bin"); -+BRCMF_FW_DEF(43569, "brcmfmac43569.bin"); -+ -+static struct brcmf_firmware_mapping brcmf_usb_fwnames[] = { -+ BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143), -+ BRCMF_FW_ENTRY(BRCM_CC_43235_CHIP_ID, 0x00000008, 43236B), -+ BRCMF_FW_ENTRY(BRCM_CC_43236_CHIP_ID, 0x00000008, 43236B), -+ BRCMF_FW_ENTRY(BRCM_CC_43238_CHIP_ID, 0x00000008, 43236B), -+ BRCMF_FW_ENTRY(BRCM_CC_43242_CHIP_ID, 0xFFFFFFFF, 43242A), -+ BRCMF_FW_ENTRY(BRCM_CC_43566_CHIP_ID, 0xFFFFFFFF, 43569), -+ BRCMF_FW_ENTRY(BRCM_CC_43569_CHIP_ID, 0xFFFFFFFF, 43569) -+}; - - #define TRX_MAGIC 0x30524448 /* "HDR0" */ - #define TRX_MAX_OFFSET 3 /* Max number of file offsets */ -@@ -139,6 +149,7 @@ struct brcmf_usbdev_info { - struct brcmf_usbreq *tx_reqs; - struct brcmf_usbreq *rx_reqs; - -+ char fw_name[BRCMF_FW_NAME_LEN]; - const u8 *image; /* buffer for combine fw and nvram */ - int image_len; - -@@ -983,45 +994,15 @@ static int brcmf_usb_dlrun(struct brcmf_ - return 0; - } - --static bool brcmf_usb_chip_support(int chipid, int chiprev) --{ -- switch(chipid) { -- case BRCM_CC_43143_CHIP_ID: -- return true; -- case BRCM_CC_43235_CHIP_ID: -- case BRCM_CC_43236_CHIP_ID: -- case BRCM_CC_43238_CHIP_ID: -- return (chiprev == 3); -- case BRCM_CC_43242_CHIP_ID: -- return true; -- case BRCM_CC_43566_CHIP_ID: -- case BRCM_CC_43569_CHIP_ID: -- return true; -- default: -- break; -- } -- return false; --} -- - static int - brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo) - { -- int devid, chiprev; - int err; - - brcmf_dbg(USB, "Enter\n"); - if (devinfo == NULL) - return -ENODEV; - -- devid = devinfo->bus_pub.devid; -- chiprev = devinfo->bus_pub.chiprev; -- -- if (!brcmf_usb_chip_support(devid, chiprev)) { -- brcmf_err("unsupported chip %d rev %d\n", -- devid, chiprev); -- return -EINVAL; -- } -- - if (!devinfo->image) { - brcmf_err("No firmware!\n"); - return -ENOENT; -@@ -1071,25 +1052,6 @@ static int check_file(const u8 *headers) - return -1; - } - --static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo) --{ -- switch (devinfo->bus_pub.devid) { -- case BRCM_CC_43143_CHIP_ID: -- return BRCMF_USB_43143_FW_NAME; -- case BRCM_CC_43235_CHIP_ID: -- case BRCM_CC_43236_CHIP_ID: -- case BRCM_CC_43238_CHIP_ID: -- return BRCMF_USB_43236_FW_NAME; -- case BRCM_CC_43242_CHIP_ID: -- return BRCMF_USB_43242_FW_NAME; -- case BRCM_CC_43566_CHIP_ID: -- case BRCM_CC_43569_CHIP_ID: -- return BRCMF_USB_43569_FW_NAME; -- default: -- return NULL; -- } --} -- - - static - struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo, -@@ -1274,9 +1236,16 @@ static int brcmf_usb_probe_cb(struct brc - bus->chip = bus_pub->devid; - bus->chiprev = bus_pub->chiprev; - -+ ret = brcmf_fw_map_chip_to_name(bus_pub->devid, bus_pub->chiprev, -+ brcmf_usb_fwnames, -+ ARRAY_SIZE(brcmf_usb_fwnames), -+ devinfo->fw_name, NULL); -+ if (ret) -+ goto fail; -+ - /* request firmware here */ -- ret = brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), -- NULL, brcmf_usb_probe_phase2); -+ ret = brcmf_fw_get_firmwares(dev, 0, devinfo->fw_name, NULL, -+ brcmf_usb_probe_phase2); - if (ret) { - brcmf_err("firmware request failed: %d\n", ret); - goto fail; -@@ -1472,8 +1441,7 @@ static int brcmf_usb_reset_resume(struct - - brcmf_dbg(USB, "Enter\n"); - -- return brcmf_fw_get_firmwares(&usb->dev, 0, -- brcmf_usb_get_fwname(devinfo), NULL, -+ return brcmf_fw_get_firmwares(&usb->dev, 0, devinfo->fw_name, NULL, - brcmf_usb_probe_phase2); - } - -@@ -1491,10 +1459,6 @@ static struct usb_device_id brcmf_usb_de - }; - - MODULE_DEVICE_TABLE(usb, brcmf_usb_devid_table); --MODULE_FIRMWARE(BRCMF_USB_43143_FW_NAME); --MODULE_FIRMWARE(BRCMF_USB_43236_FW_NAME); --MODULE_FIRMWARE(BRCMF_USB_43242_FW_NAME); --MODULE_FIRMWARE(BRCMF_USB_43569_FW_NAME); - - static struct usb_driver brcmf_usbdrvr = { - .name = KBUILD_MODNAME, diff --git a/package/kernel/mac80211/patches/376-0010-brcmfmac-Fix-double-free-on-exception-at-module-load.patch b/package/kernel/mac80211/patches/376-0010-brcmfmac-Fix-double-free-on-exception-at-module-load.patch deleted file mode 100644 index 2174d099f2..0000000000 --- a/package/kernel/mac80211/patches/376-0010-brcmfmac-Fix-double-free-on-exception-at-module-load.patch +++ /dev/null @@ -1,22 +0,0 @@ -From: Hante Meuleman <meuleman@broadcom.com> -Date: Wed, 25 Nov 2015 11:32:47 +0100 -Subject: [PATCH] brcmfmac: Fix double free on exception at module load. - -Reviewed-by: Arend Van Spriel <arend@broadcom.com> -Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> -Signed-off-by: Hante Meuleman <meuleman@broadcom.com> -Signed-off-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -1083,6 +1083,8 @@ fail: - brcmf_net_detach(ifp->ndev); - if (p2p_ifp) - brcmf_net_detach(p2p_ifp->ndev); -+ drvr->iflist[0] = NULL; -+ drvr->iflist[1] = NULL; - return ret; - } - return 0; diff --git a/package/kernel/mac80211/patches/377-brcmfmac-only-lock-and-unlock-fws-if-fws-is-not-null.patch b/package/kernel/mac80211/patches/377-brcmfmac-only-lock-and-unlock-fws-if-fws-is-not-null.patch deleted file mode 100644 index 8ec1441f81..0000000000 --- a/package/kernel/mac80211/patches/377-brcmfmac-only-lock-and-unlock-fws-if-fws-is-not-null.patch +++ /dev/null @@ -1,30 +0,0 @@ -From: Colin Ian King <colin.king@canonical.com> -Date: Wed, 2 Dec 2015 11:45:10 +0000 -Subject: [PATCH] brcmfmac: only lock and unlock fws if fws is not null - -There is a null ptr check for fws to set bcmc_credit_check, however, -there a lock and unlock on fws should only performed if fwts is -also not null to also avoid a potential null pointer deference. - -Signed-off-by: Colin Ian King <colin.king@canonical.com> -Acked-by: Arend van Spriel <arend@broadcom.com> -Signed-off-by: Kalle Valo <kvalo@codeaurora.org> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c -@@ -1609,10 +1609,11 @@ static int brcmf_fws_notify_bcmc_credit_ - { - struct brcmf_fws_info *fws = ifp->drvr->fws; - -- brcmf_fws_lock(fws); -- if (fws) -+ if (fws) { -+ brcmf_fws_lock(fws); - fws->bcmc_credit_check = true; -- brcmf_fws_unlock(fws); -+ brcmf_fws_unlock(fws); -+ } - return 0; - } - diff --git a/package/kernel/mac80211/patches/400-ath_move_debug_code.patch b/package/kernel/mac80211/patches/400-ath_move_debug_code.patch index 298f722843..72e9a41223 100644 --- a/package/kernel/mac80211/patches/400-ath_move_debug_code.patch +++ b/package/kernel/mac80211/patches/400-ath_move_debug_code.patch @@ -14,7 +14,7 @@ ccflags-y += -D__CHECK_ENDIAN__ --- a/drivers/net/wireless/ath/ath.h +++ b/drivers/net/wireless/ath/ath.h -@@ -316,13 +316,6 @@ void _ath_dbg(struct ath_common *common, +@@ -318,13 +318,6 @@ void _ath_dbg(struct ath_common *common, #endif /* CPTCFG_ATH_DEBUG */ /** Returns string describing opmode, or NULL if unknown mode. */ diff --git a/package/kernel/mac80211/patches/402-ath_regd_optional.patch b/package/kernel/mac80211/patches/402-ath_regd_optional.patch index 2dac5057c9..7351353076 100644 --- a/package/kernel/mac80211/patches/402-ath_regd_optional.patch +++ b/package/kernel/mac80211/patches/402-ath_regd_optional.patch @@ -47,9 +47,9 @@ --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig -@@ -22,6 +22,9 @@ menuconfig ATH_CARDS +@@ -23,6 +23,9 @@ config WLAN_VENDOR_ATH - if ATH_CARDS + if WLAN_VENDOR_ATH +config ATH_USER_REGD + bool "Do not enforce EEPROM regulatory restrictions" @@ -59,9 +59,9 @@ ---help--- --- a/.local-symbols +++ b/.local-symbols -@@ -89,6 +89,7 @@ RTL8187_LEDS= +@@ -125,6 +125,7 @@ ADM8211= ATH_COMMON= - ATH_CARDS= + WLAN_VENDOR_ATH= ATH_DEBUG= +ATH_USER_REGD= ATH_TRACEPOINTS= diff --git a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch index 1476953c21..1ef55456c5 100644 --- a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch +++ b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch @@ -1,6 +1,6 @@ --- a/net/wireless/reg.c +++ b/net/wireless/reg.c -@@ -2368,6 +2368,8 @@ void regulatory_hint_country_ie(struct w +@@ -2411,6 +2411,8 @@ void regulatory_hint_country_ie(struct w enum environment_cap env = ENVIRON_ANY; struct regulatory_request *request = NULL, *lr; @@ -9,11 +9,11 @@ /* IE len must be evenly divisible by 2 */ if (country_ie_len & 0x01) return; -@@ -2571,6 +2573,7 @@ static void restore_regulatory_settings( +@@ -2617,6 +2619,7 @@ static void restore_regulatory_settings( void regulatory_hint_disconnect(void) { + return; - REG_DBG_PRINT("All devices are disconnected, going to restore regulatory settings\n"); + pr_debug("All devices are disconnected, going to restore regulatory settings\n"); restore_regulatory_settings(false); } diff --git a/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch b/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch index 93760f9f8b..1a62484954 100644 --- a/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch +++ b/package/kernel/mac80211/patches/410-ath9k_allow_adhoc_and_ap.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -715,6 +715,7 @@ static const struct ieee80211_iface_limi +@@ -722,6 +722,7 @@ static const struct ieee80211_iface_limi BIT(NL80211_IFTYPE_AP) }, { .max = 1, .types = BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO) }, diff --git a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch index aa521d2abb..924b62e0d4 100644 --- a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch +++ b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch @@ -121,7 +121,7 @@ drivers/net/wireless/ath/ath5k/debug.c | 86 ++++++++++++++++++++++++++++++++ debugfs_create_file("antenna", S_IWUSR | S_IRUSR, phydir, ah, --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h -@@ -1371,6 +1371,7 @@ struct ath5k_hw { +@@ -1372,6 +1372,7 @@ struct ath5k_hw { u8 ah_coverage_class; bool ah_ack_bitrate_high; u8 ah_bwmode; diff --git a/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch b/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch index ed2cfee72c..d2a3b96570 100644 --- a/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch +++ b/package/kernel/mac80211/patches/510-ath9k_intr_mitigation_tweak.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -389,13 +389,8 @@ static void ath9k_hw_init_config(struct +@@ -390,13 +390,8 @@ static void ath9k_hw_init_config(struct ah->config.rx_intr_mitigation = true; @@ -14,5 +14,5 @@ + ah->config.rimt_last = 250; + ah->config.rimt_first = 500; - /* - * We need this for PCI devices only (Cardbus, PCI, miniPCI) + if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) + ah->config.pll_pwrsave = 7; diff --git a/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch b/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch index d4104f0e93..6766111dfd 100644 --- a/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch +++ b/package/kernel/mac80211/patches/511-ath9k_reduce_rxbuf.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -87,7 +87,7 @@ int ath_descdma_setup(struct ath_softc * +@@ -88,7 +88,7 @@ int ath_descdma_setup(struct ath_softc * (_l) &= ((_sz) - 1); \ } while (0) diff --git a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch index 40b5c81b80..c84d1bc829 100644 --- a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch +++ b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -647,6 +647,7 @@ int ath9k_hw_init(struct ath_hw *ah) +@@ -651,6 +651,7 @@ int ath9k_hw_init(struct ath_hw *ah) /* These are all the AR5008/AR9001/AR9002/AR9003 hardware family of chipsets */ switch (ah->hw_version.devid) { diff --git a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch index 0c50a0bbba..e151a12967 100644 --- a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch +++ b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch @@ -1,6 +1,6 @@ --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h -@@ -2320,6 +2320,7 @@ struct cfg80211_qos_map { +@@ -2363,6 +2363,7 @@ struct cfg80211_qos_map { * (as advertised by the nl80211 feature flag.) * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful @@ -8,7 +8,7 @@ * * @set_wds_peer: set the WDS peer for a WDS interface * -@@ -2576,6 +2577,7 @@ struct cfg80211_ops { +@@ -2624,6 +2625,7 @@ struct cfg80211_ops { enum nl80211_tx_power_setting type, int mbm); int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, int *dbm); @@ -18,7 +18,7 @@ const u8 *addr); --- a/include/net/mac80211.h +++ b/include/net/mac80211.h -@@ -1171,6 +1171,7 @@ enum ieee80211_smps_mode { +@@ -1286,6 +1286,7 @@ enum ieee80211_smps_mode { * * @power_level: requested transmit power (in dBm), backward compatibility * value only that is set to the minimum of all interfaces @@ -26,19 +26,19 @@ * * @chandef: the channel definition to tune to * @radar_enabled: whether radar detection is enabled -@@ -1192,6 +1193,7 @@ struct ieee80211_conf { +@@ -1306,6 +1307,7 @@ enum ieee80211_smps_mode { + struct ieee80211_conf { u32 flags; int power_level, dynamic_ps_timeout; - int max_sleep_period; + int max_antenna_gain; u16 listen_interval; u8 ps_dtim_period; --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h -@@ -1760,6 +1760,9 @@ enum nl80211_commands { - * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device - * is operating in an indoor environment. +@@ -1790,6 +1790,9 @@ enum nl80211_commands { + * between scans. The scan plans are executed sequentially. + * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. @@ -46,9 +46,9 @@ * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2129,6 +2132,8 @@ enum nl80211_attrs { - - NL80211_ATTR_REG_INDOOR, +@@ -2164,6 +2167,8 @@ enum nl80211_attrs { + NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, + NL80211_ATTR_SCHED_SCAN_PLANS, + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + @@ -57,7 +57,7 @@ __NL80211_ATTR_AFTER_LAST, --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -2208,6 +2208,19 @@ static int ieee80211_get_tx_power(struct +@@ -2229,6 +2229,19 @@ static int ieee80211_get_tx_power(struct return 0; } @@ -77,7 +77,7 @@ static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev, const u8 *addr) { -@@ -3771,6 +3784,7 @@ const struct cfg80211_ops mac80211_confi +@@ -3403,6 +3416,7 @@ const struct cfg80211_ops mac80211_confi .set_wiphy_params = ieee80211_set_wiphy_params, .set_tx_power = ieee80211_set_tx_power, .get_tx_power = ieee80211_get_tx_power, @@ -87,7 +87,7 @@ CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd) --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h -@@ -1333,6 +1333,7 @@ struct ieee80211_local { +@@ -1318,6 +1318,7 @@ struct ieee80211_local { int dynamic_ps_forced_timeout; int user_power_level; /* in dBm, for all interfaces */ @@ -97,7 +97,7 @@ --- a/net/mac80211/main.c +++ b/net/mac80211/main.c -@@ -98,7 +98,7 @@ static u32 ieee80211_hw_conf_chan(struct +@@ -93,7 +93,7 @@ static u32 ieee80211_hw_conf_chan(struct struct ieee80211_sub_if_data *sdata; struct cfg80211_chan_def chandef = {}; u32 changed = 0; @@ -106,7 +106,7 @@ u32 offchannel_flag; offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; -@@ -155,6 +155,12 @@ static u32 ieee80211_hw_conf_chan(struct +@@ -150,6 +150,12 @@ static u32 ieee80211_hw_conf_chan(struct } rcu_read_unlock(); @@ -119,7 +119,7 @@ if (local->hw.conf.power_level != power) { changed |= IEEE80211_CONF_CHANGE_POWER; local->hw.conf.power_level = power; -@@ -578,6 +584,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_ +@@ -586,6 +592,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_ IEEE80211_RADIOTAP_MCS_HAVE_BW; local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; @@ -129,7 +129,7 @@ local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c -@@ -400,6 +400,7 @@ static const struct nla_policy nl80211_p +@@ -403,6 +403,7 @@ static const struct nla_policy nl80211_p [NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 }, [NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 }, [NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG }, @@ -137,7 +137,7 @@ }; /* policy for the key attributes */ -@@ -2206,6 +2207,20 @@ static int nl80211_set_wiphy(struct sk_b +@@ -2220,6 +2221,20 @@ static int nl80211_set_wiphy(struct sk_b if (result) return result; } diff --git a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch index 7512811e70..5a5e4643f5 100644 --- a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch +++ b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch @@ -24,7 +24,7 @@ struct ath_softc { struct ieee80211_hw *hw; struct device *dev; -@@ -1004,9 +1014,8 @@ struct ath_softc { +@@ -1005,9 +1015,8 @@ struct ath_softc { spinlock_t chan_lock; #ifdef CPTCFG_MAC80211_LEDS @@ -54,7 +54,8 @@ + (brightness != LED_OFF) ^ led->gpio->active_low); + ath9k_ps_restore(sc); +} -+ + +- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val); +static int ath_add_led(struct ath_softc *sc, struct ath_led *led) +{ + const struct gpio_led *gpio = led->gpio; @@ -63,8 +64,7 @@ + led->cdev.name = gpio->name; + led->cdev.default_trigger = gpio->default_trigger; + led->cdev.brightness_set = ath_led_brightness; - -- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val); ++ + ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->cdev); + if (ret < 0) + return ret; @@ -159,7 +159,7 @@ + trigger = ieee80211_get_radio_led_name(sc->hw); - sc->led_registered = true; -+ ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, 1); ++ ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, !sc->sc_ah->config.led_active_high); } void ath_fill_led_pin(struct ath_softc *sc) diff --git a/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch b/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch index dc33cd029b..7c10ea6b0d 100644 --- a/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch +++ b/package/kernel/mac80211/patches/531-ath9k_extra_platform_leds.patch @@ -59,7 +59,7 @@ @@ -120,6 +141,12 @@ void ath_init_leds(struct ath_softc *sc) trigger = ieee80211_get_radio_led_name(sc->hw); - ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, 1); + ath_create_gpio_led(sc, sc->sc_ah->led_pin, led_name, trigger, !sc->sc_ah->config.led_active_high); + + if (!pdata) + return; diff --git a/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch b/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch new file mode 100644 index 0000000000..6d62a2b1c2 --- /dev/null +++ b/package/kernel/mac80211/patches/532-ath9k_get_led_polarity_from_platform_data.patch @@ -0,0 +1,20 @@ +--- a/include/linux/ath9k_platform.h ++++ b/include/linux/ath9k_platform.h +@@ -36,6 +36,7 @@ struct ath9k_platform_data { + bool tx_gain_buffalo; + bool disable_2ghz; + bool disable_5ghz; ++ bool led_active_high; + + int (*get_mac_revision)(void); + int (*external_reset)(void); +--- a/drivers/net/wireless/ath/ath9k/init.c ++++ b/drivers/net/wireless/ath/ath9k/init.c +@@ -577,6 +577,7 @@ static int ath9k_init_softc(u16 devid, s + ah->external_reset = pdata->external_reset; + ah->disable_2ghz = pdata->disable_2ghz; + ah->disable_5ghz = pdata->disable_5ghz; ++ ah->config.led_active_high = pdata->led_active_high; + if (!pdata->endian_check) + ah->ah_flags |= AH_NO_EEP_SWAP; + } diff --git a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch index 08c5a0ffc0..e83c6bfbf9 100644 --- a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch +++ b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch @@ -62,7 +62,7 @@ debugfs_create_devm_seqfile(sc->dev, "interrupt", sc->debug.debugfs_phy, --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -513,6 +513,12 @@ enum { +@@ -519,6 +519,12 @@ enum { ATH9K_RESET_COLD, }; @@ -75,7 +75,7 @@ struct ath9k_hw_version { u32 magic; u16 devid; -@@ -794,6 +800,8 @@ struct ath_hw { +@@ -804,6 +810,8 @@ struct ath_hw { u32 rfkill_polarity; u32 ah_flags; @@ -84,7 +84,7 @@ bool reset_power_on; bool htc_reset_init; -@@ -1055,6 +1063,7 @@ void ath9k_hw_check_nav(struct ath_hw *a +@@ -1066,6 +1074,7 @@ void ath9k_hw_check_nav(struct ath_hw *a bool ath9k_hw_check_alive(struct ath_hw *ah); bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode); @@ -94,7 +94,7 @@ struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah, --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -1804,6 +1804,20 @@ u32 ath9k_hw_get_tsf_offset(struct times +@@ -1819,6 +1819,20 @@ u32 ath9k_hw_get_tsf_offset(struct times } EXPORT_SYMBOL(ath9k_hw_get_tsf_offset); @@ -115,7 +115,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, struct ath9k_hw_cal_data *caldata, bool fastcc) { -@@ -2012,6 +2026,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st +@@ -2027,6 +2041,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st ar9003_hw_disable_phy_restart(ah); ath9k_hw_apply_gpio_override(ah); diff --git a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch index 8c9b34cb0a..d7bb5a12ce 100644 --- a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch +++ b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -710,6 +710,7 @@ struct ath_spec_scan { +@@ -720,6 +720,7 @@ struct ath_spec_scan { * @config_pci_powersave: * @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC * @@ -8,7 +8,7 @@ * @spectral_scan_config: set parameters for spectral scan and enable/disable it * @spectral_scan_trigger: trigger a spectral scan run * @spectral_scan_wait: wait for a spectral scan run to finish -@@ -732,6 +733,7 @@ struct ath_hw_ops { +@@ -742,6 +743,7 @@ struct ath_hw_ops { struct ath_hw_antcomb_conf *antconf); void (*antdiv_comb_conf_set)(struct ath_hw *ah, struct ath_hw_antcomb_conf *antconf); @@ -18,7 +18,7 @@ void (*spectral_scan_trigger)(struct ath_hw *ah); --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -1999,6 +1999,26 @@ void ar9003_hw_init_rate_txpower(struct +@@ -1998,6 +1998,26 @@ void ar9003_hw_init_rate_txpower(struct } } @@ -45,7 +45,7 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); -@@ -2035,6 +2055,7 @@ void ar9003_hw_attach_phy_ops(struct ath +@@ -2034,6 +2054,7 @@ void ar9003_hw_attach_phy_ops(struct ath priv_ops->set_radar_params = ar9003_hw_set_radar_params; priv_ops->fast_chan_change = ar9003_hw_fast_chan_change; @@ -55,7 +55,7 @@ ops->spectral_scan_config = ar9003_hw_spectral_scan_config; --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -703,7 +703,8 @@ static void ath9k_init_txpower_limits(st +@@ -711,7 +711,8 @@ static void ath9k_init_txpower_limits(st if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ); @@ -65,7 +65,7 @@ } static const struct ieee80211_iface_limit if_limits[] = { -@@ -896,6 +897,18 @@ static void ath9k_set_hw_capab(struct at +@@ -897,6 +898,18 @@ static void ath9k_set_hw_capab(struct at SET_IEEE80211_PERM_ADDR(hw, common->macaddr); } @@ -84,7 +84,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, const struct ath_bus_ops *bus_ops) { -@@ -941,6 +954,8 @@ int ath9k_init_device(u16 devid, struct +@@ -942,6 +955,8 @@ int ath9k_init_device(u16 devid, struct ARRAY_SIZE(ath9k_tpt_blink)); #endif @@ -110,7 +110,7 @@ static inline void ath9k_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable) --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -1316,9 +1316,30 @@ void ar5008_hw_init_rate_txpower(struct +@@ -1327,9 +1327,30 @@ void ar5008_hw_init_rate_txpower(struct } } @@ -141,7 +141,7 @@ static const u32 ar5416_cca_regs[6] = { AR_PHY_CCA, AR_PHY_CH1_CCA, -@@ -1333,6 +1354,8 @@ int ar5008_hw_attach_phy_ops(struct ath_ +@@ -1344,6 +1365,8 @@ int ar5008_hw_attach_phy_ops(struct ath_ if (ret) return ret; diff --git a/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch b/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch index 240b898c0d..8768c5d89a 100644 --- a/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch +++ b/package/kernel/mac80211/patches/544-ath9k-ar933x-usb-hang-workaround.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -245,6 +245,19 @@ void ath9k_hw_get_channel_centers(struct +@@ -246,6 +246,19 @@ void ath9k_hw_get_channel_centers(struct centers->synth_center + (extoff * HT40_CHANNEL_CENTER_SHIFT); } @@ -20,7 +20,7 @@ /******************/ /* Chip Revisions */ /******************/ -@@ -1382,6 +1395,9 @@ static bool ath9k_hw_set_reset(struct at +@@ -1397,6 +1410,9 @@ static bool ath9k_hw_set_reset(struct at if (AR_SREV_9100(ah)) udelay(50); @@ -30,7 +30,7 @@ return true; } -@@ -1481,6 +1497,9 @@ static bool ath9k_hw_chip_reset(struct a +@@ -1496,6 +1512,9 @@ static bool ath9k_hw_chip_reset(struct a ar9003_hw_internal_regulator_apply(ah); ath9k_hw_init_pll(ah, chan); @@ -40,7 +40,7 @@ return true; } -@@ -1782,8 +1801,14 @@ static int ath9k_hw_do_fastcc(struct ath +@@ -1797,8 +1816,14 @@ static int ath9k_hw_do_fastcc(struct ath if (AR_SREV_9271(ah)) ar9002_hw_load_ani_reg(ah, chan); @@ -55,7 +55,7 @@ return -EINVAL; } -@@ -2037,6 +2062,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st +@@ -2052,6 +2077,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st ath9k_hw_set_radar_params(ah); } diff --git a/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch b/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch index 9610372b08..3d24ccda1f 100644 --- a/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch +++ b/package/kernel/mac80211/patches/545-ath9k_ani_ws_detect.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -945,55 +945,6 @@ static bool ar5008_hw_ani_control_new(st +@@ -956,55 +956,6 @@ static bool ar5008_hw_ani_control_new(st * on == 0 means more noise imm */ u32 on = param ? 1 : 0; @@ -79,7 +79,7 @@ static const u8 ofdm2pwr[] = { ALL_TARGET_LEGACY_6_24, ALL_TARGET_LEGACY_6_24, -@@ -1090,11 +1076,6 @@ static bool ar9003_hw_ani_control(struct +@@ -1089,11 +1075,6 @@ static bool ar9003_hw_ani_control(struct struct ath_common *common = ath9k_hw_common(ah); struct ath9k_channel *chan = ah->curchan; struct ar5416AniState *aniState = &ah->ani; @@ -91,7 +91,7 @@ s32 value, value2; switch (cmd & ah->ani_function) { -@@ -1108,61 +1089,6 @@ static bool ar9003_hw_ani_control(struct +@@ -1107,61 +1088,6 @@ static bool ar9003_hw_ani_control(struct */ u32 on = param ? 1 : 0; diff --git a/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch b/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch index c0dc4fe7a0..bd81555ac1 100644 --- a/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch +++ b/package/kernel/mac80211/patches/600-0001-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch @@ -16,36 +16,18 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- Changes since v1: --- --- - drivers/net/wireless/rt2x00/rt2800.h | 13 ------------- - drivers/net/wireless/rt2x00/rt2800lib.h | 11 +++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800.h | 13 ------------- + drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 11 +++++++++++ 2 files changed, 11 insertions(+), 13 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h -@@ -2960,17 +2960,4 @@ enum rt2800_eeprom_word { - */ - #define BCN_TBTT_OFFSET 64 - --/* -- * RT2800 driver data structure -- */ --struct rt2800_drv_data { -- u8 calibration_bw20; -- u8 calibration_bw40; -- u8 bbp25; -- u8 bbp26; -- u8 txmixer_gain_24g; -- u8 txmixer_gain_5g; -- unsigned int tbtt_tick; --}; -- - #endif /* RT2800_H */ ---- a/drivers/net/wireless/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/rt2x00/rt2800lib.h -@@ -20,6 +20,17 @@ +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h +@@ -20,6 +20,20 @@ #ifndef RT2800LIB_H #define RT2800LIB_H ++#include "rt2800.h" ++ +/* RT2800 driver data structure */ +struct rt2800_drv_data { + u8 calibration_bw20; @@ -55,8 +37,30 @@ Changes since v1: --- + u8 txmixer_gain_24g; + u8 txmixer_gain_5g; + unsigned int tbtt_tick; ++ DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); +}; + struct rt2800_ops { void (*register_read)(struct rt2x00_dev *rt2x00dev, const unsigned int offset, u32 *value); +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h +@@ -2969,18 +2969,4 @@ enum rt2800_eeprom_word { + #define WCID_END 222 + #define STA_IDS_SIZE (WCID_END - WCID_START + 2) + +-/* +- * RT2800 driver data structure +- */ +-struct rt2800_drv_data { +- u8 calibration_bw20; +- u8 calibration_bw40; +- u8 bbp25; +- u8 bbp26; +- u8 txmixer_gain_24g; +- u8 txmixer_gain_5g; +- unsigned int tbtt_tick; +- DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); +-}; +- + #endif /* RT2800_H */ diff --git a/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch b/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch index 6bad6ac509..82459091fe 100644 --- a/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch +++ b/package/kernel/mac80211/patches/600-0002-rt2x00-rt2800lib-introduce-RT2800_HAS_HIGH_SHARED_ME.patch @@ -18,13 +18,13 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Changes since v1: - don't enable the new flag for RT3071 and RT5592 --- - drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++++ - drivers/net/wireless/rt2x00/rt2800lib.h | 13 +++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 4 ++++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 13 +++++++++++++ 2 files changed, 17 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7747,6 +7747,7 @@ static int rt2800_probe_rt(struct rt2x00 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7722,6 +7722,7 @@ static int rt2800_probe_rt(struct rt2x00 int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev) { @@ -32,7 +32,7 @@ Changes since v1: int retval; u32 reg; -@@ -7754,6 +7755,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -7729,6 +7730,9 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (retval) return retval; @@ -42,11 +42,11 @@ Changes since v1: /* * Allocate eeprom data. */ ---- a/drivers/net/wireless/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/rt2x00/rt2800lib.h -@@ -20,6 +20,10 @@ - #ifndef RT2800LIB_H - #define RT2800LIB_H +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h +@@ -22,6 +22,10 @@ + + #include "rt2800.h" +enum rt2800_flag { + RT2800_HAS_HIGH_SHARED_MEM, @@ -55,16 +55,16 @@ Changes since v1: /* RT2800 driver data structure */ struct rt2800_drv_data { u8 calibration_bw20; -@@ -29,6 +33,8 @@ struct rt2800_drv_data { - u8 txmixer_gain_24g; +@@ -32,6 +36,8 @@ struct rt2800_drv_data { u8 txmixer_gain_5g; unsigned int tbtt_tick; + DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); + + unsigned long rt2800_flags; }; struct rt2800_ops { -@@ -61,6 +67,13 @@ struct rt2800_ops { +@@ -64,6 +70,13 @@ struct rt2800_ops { __le32 *(*drv_get_txwi)(struct queue_entry *entry); }; diff --git a/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch b/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch index 9f8dfcc467..7abfcd16f2 100644 --- a/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch +++ b/package/kernel/mac80211/patches/600-0003-rt2x00-rt2800-serialize-shared-memory-access.patch @@ -17,17 +17,17 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- Changes since v1: --- --- - drivers/net/wireless/rt2x00/rt2800lib.c | 55 +++++++++++++++++++++++++++++- - drivers/net/wireless/rt2x00/rt2800lib.h | 32 +++++++++++++++++ - drivers/net/wireless/rt2x00/rt2800mmio.c | 26 ++++++++++++++ - drivers/net/wireless/rt2x00/rt2800mmio.h | 4 +++ - drivers/net/wireless/rt2x00/rt2800pci.c | 14 ++++++++ - drivers/net/wireless/rt2x00/rt2800soc.c | 3 ++ - drivers/net/wireless/rt2x00/rt2800usb.c | 31 +++++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 55 +++++++++++++++++++++++++++++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 32 +++++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 26 ++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800mmio.h | 4 +++ + drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 14 ++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 3 ++ + drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 31 +++++++++++++++++ 7 files changed, 164 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -451,11 +451,13 @@ void rt2800_mcu_request(struct rt2x00_de rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); @@ -175,7 +175,7 @@ Changes since v1: --- /* * Update WCID information -@@ -1437,8 +1467,11 @@ int rt2800_config_pairwise_key(struct rt +@@ -1405,8 +1435,11 @@ int rt2800_config_pairwise_key(struct rt sizeof(key_entry.rx_mic)); offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); @@ -187,7 +187,7 @@ Changes since v1: --- } /* -@@ -4908,14 +4941,19 @@ static int rt2800_init_registers(struct +@@ -4885,14 +4918,19 @@ static int rt2800_init_registers(struct /* * ASIC will keep garbage value after boot, clear encryption keys. */ @@ -207,7 +207,7 @@ Changes since v1: --- } /* -@@ -5041,8 +5079,10 @@ static int rt2800_wait_bbp_ready(struct +@@ -5018,8 +5056,10 @@ static int rt2800_wait_bbp_ready(struct * BBP was enabled after firmware was loaded, * but we need to reactivate it now. */ @@ -218,7 +218,7 @@ Changes since v1: --- msleep(1); for (i = 0; i < REGISTER_BUSY_COUNT; i++) { -@@ -6738,11 +6778,19 @@ int rt2800_enable_radio(struct rt2x00_de +@@ -6715,11 +6755,19 @@ int rt2800_enable_radio(struct rt2x00_de /* * Send signal during boot time to initialize firmware. */ @@ -239,7 +239,7 @@ Changes since v1: --- msleep(1); /* -@@ -7751,6 +7799,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -7726,6 +7774,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r int retval; u32 reg; @@ -248,22 +248,22 @@ Changes since v1: --- retval = rt2800_probe_rt(rt2x00dev); if (retval) return retval; -@@ -7830,8 +7880,11 @@ void rt2800_get_tkip_seq(struct ieee8021 - u32 offset; +@@ -7809,8 +7859,11 @@ void rt2800_get_key_seq(struct ieee80211 + return; - offset = MAC_IVEIV_ENTRY(hw_key_idx); + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); + + rt2800_shared_mem_lock(rt2x00dev); rt2800_register_multiread(rt2x00dev, offset, &iveiv_entry, sizeof(iveiv_entry)); + rt2800_shared_mem_unlock(rt2x00dev); - memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16)); - memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32)); ---- a/drivers/net/wireless/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/rt2x00/rt2800lib.h -@@ -35,6 +35,11 @@ struct rt2800_drv_data { - unsigned int tbtt_tick; + memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2); + memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4); +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h +@@ -38,6 +38,11 @@ struct rt2800_drv_data { + DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); unsigned long rt2800_flags; + @@ -274,7 +274,7 @@ Changes since v1: --- }; struct rt2800_ops { -@@ -65,6 +70,10 @@ struct rt2800_ops { +@@ -68,6 +73,10 @@ struct rt2800_ops { const u8 *data, const size_t len); int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev); __le32 *(*drv_get_txwi)(struct queue_entry *entry); @@ -285,7 +285,7 @@ Changes since v1: --- }; static inline bool rt2800_has_high_shared_mem(struct rt2x00_dev *rt2x00dev) -@@ -74,6 +83,29 @@ static inline bool rt2800_has_high_share +@@ -77,6 +86,29 @@ static inline bool rt2800_has_high_share return test_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags); } @@ -315,8 +315,8 @@ Changes since v1: --- static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev, const unsigned int offset, u32 *value) ---- a/drivers/net/wireless/rt2x00/rt2800mmio.c -+++ b/drivers/net/wireless/rt2x00/rt2800mmio.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c @@ -820,8 +820,10 @@ int rt2800mmio_init_registers(struct rt2 rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); rt2x00mmio_register_write(rt2x00dev, WPDMA_RST_IDX, reg); @@ -359,8 +359,8 @@ Changes since v1: --- MODULE_AUTHOR(DRV_PROJECT); MODULE_VERSION(DRV_VERSION); MODULE_DESCRIPTION("rt2800 MMIO library"); ---- a/drivers/net/wireless/rt2x00/rt2800mmio.h -+++ b/drivers/net/wireless/rt2x00/rt2800mmio.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h @@ -160,4 +160,8 @@ int rt2800mmio_init_registers(struct rt2 /* Device state switch handlers. */ int rt2800mmio_enable_radio(struct rt2x00_dev *rt2x00dev); @@ -370,8 +370,8 @@ Changes since v1: --- +void rt2800mmio_shmem_unlock(struct rt2x00_dev *rt2x00dev); + #endif /* RT2800MMIO_H */ ---- a/drivers/net/wireless/rt2x00/rt2800pci.c -+++ b/drivers/net/wireless/rt2x00/rt2800pci.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c @@ -69,7 +69,9 @@ static void rt2800pci_mcu_status(struct return; @@ -444,8 +444,8 @@ Changes since v1: --- }; static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { ---- a/drivers/net/wireless/rt2x00/rt2800soc.c -+++ b/drivers/net/wireless/rt2x00/rt2800soc.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c @@ -176,6 +176,9 @@ static const struct rt2800_ops rt2800soc .drv_write_firmware = rt2800soc_write_firmware, .drv_init_registers = rt2800mmio_init_registers, @@ -456,8 +456,8 @@ Changes since v1: --- }; static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = { ---- a/drivers/net/wireless/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/rt2x00/rt2800usb.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c @@ -51,6 +51,27 @@ static bool rt2800usb_hwcrypt_disabled(s return modparam_nohwcrypt; } @@ -486,7 +486,7 @@ Changes since v1: --- /* * Queue handlers. */ -@@ -294,8 +315,10 @@ static int rt2800usb_write_firmware(stru +@@ -299,8 +320,10 @@ static int rt2800usb_write_firmware(stru data + offset, length); } @@ -497,7 +497,7 @@ Changes since v1: --- /* * Send firmware request to device to load firmware, -@@ -310,7 +333,10 @@ static int rt2800usb_write_firmware(stru +@@ -315,7 +338,10 @@ static int rt2800usb_write_firmware(stru } msleep(10); @@ -508,7 +508,7 @@ Changes since v1: --- return 0; } -@@ -328,8 +354,10 @@ static int rt2800usb_init_registers(stru +@@ -333,8 +359,10 @@ static int rt2800usb_init_registers(stru if (rt2800_wait_csr_ready(rt2x00dev)) return -EBUSY; @@ -519,7 +519,7 @@ Changes since v1: --- reg = 0; rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); -@@ -859,6 +887,9 @@ static const struct rt2800_ops rt2800usb +@@ -863,6 +891,9 @@ static const struct rt2800_ops rt2800usb .drv_write_firmware = rt2800usb_write_firmware, .drv_init_registers = rt2800usb_init_registers, .drv_get_txwi = rt2800usb_get_txwi, diff --git a/package/kernel/mac80211/patches/600-0004-rt2x00-rt2800lib-fix-beacon-generation-on-RT3593.patch b/package/kernel/mac80211/patches/600-0004-rt2x00-rt2800lib-fix-beacon-generation-on-RT3593.patch index b8c1914645..985a3b91f1 100644 --- a/package/kernel/mac80211/patches/600-0004-rt2x00-rt2800lib-fix-beacon-generation-on-RT3593.patch +++ b/package/kernel/mac80211/patches/600-0004-rt2x00-rt2800lib-fix-beacon-generation-on-RT3593.patch @@ -23,12 +23,12 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- Changes since v1: --- --- - drivers/net/wireless/rt2x00/rt2800.h | 3 +++ - drivers/net/wireless/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800.h | 3 +++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -574,6 +574,7 @@ #define PBF_SYS_CTRL 0x0400 #define PBF_SYS_CTRL_READY FIELD32(0x00000080) @@ -46,8 +46,8 @@ Changes since v1: --- #define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64) /* ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -82,6 +82,39 @@ static inline bool rt2800_is_305x_soc(st return false; } diff --git a/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch b/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch index e7eb630d48..02b2acfeee 100644 --- a/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch +++ b/package/kernel/mac80211/patches/600-0005-rt2x00-rt2800lib-add-hw_beacon_count-field-to-struct.patch @@ -18,13 +18,13 @@ new field with the actually used value. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++++- - drivers/net/wireless/rt2x00/rt2800lib.h | 1 + + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -4638,6 +4638,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner); +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4615,6 +4615,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner); */ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) { @@ -32,7 +32,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> u32 reg; u16 eeprom; unsigned int i; -@@ -5003,7 +5004,7 @@ static int rt2800_init_registers(struct +@@ -4980,7 +4981,7 @@ static int rt2800_init_registers(struct /* * Clear all beacons */ @@ -41,7 +41,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> rt2800_clear_beacon_register(rt2x00dev, i); if (rt2x00_is_usb(rt2x00dev)) { -@@ -7852,6 +7853,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -7827,6 +7828,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (rt2x00_rt(rt2x00dev, RT3593)) __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags); @@ -50,13 +50,13 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> /* * Allocate eeprom data. */ ---- a/drivers/net/wireless/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/rt2x00/rt2800lib.h -@@ -33,6 +33,7 @@ struct rt2800_drv_data { +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h +@@ -35,6 +35,7 @@ struct rt2800_drv_data { u8 txmixer_gain_24g; u8 txmixer_gain_5g; unsigned int tbtt_tick; + unsigned int hw_beacon_count; + DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); unsigned long rt2800_flags; - diff --git a/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch b/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch index b79b4bea1a..4e735d348a 100644 --- a/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch +++ b/package/kernel/mac80211/patches/600-0006-rt2x00-rt2800lib-init-additional-beacon-offset-regis.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: init additional beacon offset registers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800.h | 14 ++++++++++++++ - drivers/net/wireless/rt2x00/rt2800lib.c | 24 ++++++++++++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800.h | 14 ++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 24 ++++++++++++++++++++++++ 2 files changed, 38 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -629,6 +629,20 @@ */ #define PBF_DBG 0x043c @@ -32,9 +32,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> /* * RF registers */ ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -4650,6 +4650,30 @@ static int rt2800_init_registers(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4627,6 +4627,30 @@ static int rt2800_init_registers(struct if (ret) return ret; diff --git a/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch b/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch index 180c5e3061..e909272710 100644 --- a/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch +++ b/package/kernel/mac80211/patches/600-0007-rt2x00-rt2800lib-fix-max-supported-beacon-count-for-.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix max supported beacon count for RT3593 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7877,7 +7877,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7852,7 +7852,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (rt2x00_rt(rt2x00dev, RT3593)) __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags); diff --git a/package/kernel/mac80211/patches/600-0008-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch b/package/kernel/mac80211/patches/600-0008-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch index 8a10c6e02f..565e39de5f 100644 --- a/package/kernel/mac80211/patches/600-0008-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0008-rt2x00-allow-to-build-rt2800soc-module-for-RT3883.patch @@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: allow to build rt2800soc module for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/Kconfig | 2 +- + drivers/net/wireless/ralink/rt2x00/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/Kconfig -+++ b/drivers/net/wireless/rt2x00/Kconfig +--- a/drivers/net/wireless/ralink/rt2x00/Kconfig ++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig @@ -210,7 +210,7 @@ endif config RT2800SOC tristate "Ralink WiSoC support" diff --git a/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch b/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch index 31aa34a8e7..7fe38e0958 100644 --- a/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0009-rt2x00-rt2800lib-enable-support-for-RT3883.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: enable support for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 1 + + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 + 1 file changed, 1 insertion(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7847,6 +7847,7 @@ static int rt2800_probe_rt(struct rt2x00 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7822,6 +7822,7 @@ static int rt2800_probe_rt(struct rt2x00 case RT3390: case RT3572: case RT3593: diff --git a/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch b/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch index a90c5909ba..253a0c0c1e 100644 --- a/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch +++ b/package/kernel/mac80211/patches/600-0010-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add rf_vals for RF3853 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800.h | 4 +- - drivers/net/wireless/rt2x00/rt2800lib.c | 65 +++++++++++++++++++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800.h | 4 +- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 65 +++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -48,7 +48,8 @@ * RF2853 2.4G/5G 3T3R * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390) @@ -29,9 +29,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> #define RF5360 0x5360 #define RF5362 0x5362 #define RF5370 0x5370 ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7465,6 +7465,66 @@ static const struct rf_channel rf_vals_3 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7442,6 +7442,66 @@ static const struct rf_channel rf_vals_3 {173, 0x61, 0, 9}, }; @@ -98,7 +98,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> static const struct rf_channel rf_vals_5592_xtal20[] = { /* Channel, N, K, mod, R */ {1, 482, 4, 10, 3}, -@@ -7694,6 +7754,11 @@ static int rt2800_probe_hw_mode(struct r +@@ -7669,6 +7729,11 @@ static int rt2800_probe_hw_mode(struct r spec->channels = rf_vals_3x; break; diff --git a/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch b/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch index ab2673b55b..f15c22b30f 100644 --- a/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch +++ b/package/kernel/mac80211/patches/600-0011-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: enable VCO calibration for RF3853 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++ 1 file changed, 2 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -4402,6 +4402,7 @@ void rt2800_vco_calibration(struct rt2x0 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4379,6 +4379,7 @@ void rt2800_vco_calibration(struct rt2x0 case RF3053: case RF3070: case RF3290: @@ -18,7 +18,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> case RF5360: case RF5362: case RF5370: -@@ -7873,6 +7874,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -7848,6 +7849,7 @@ static int rt2800_probe_hw_mode(struct r case RF3053: case RF3070: case RF3290: diff --git a/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch b/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch index 05ed444435..c120f2c1d1 100644 --- a/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch +++ b/package/kernel/mac80211/patches/600-0012-rt2x00-rt2800lib-add-channel-configuration-function-.patch @@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add channel configuration function for Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 208 +++++++++++++++++++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 208 +++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -2649,6 +2649,211 @@ static void rt2800_config_channel_rf3053 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -2626,6 +2626,211 @@ static void rt2800_config_channel_rf3053 } } @@ -223,7 +223,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> #define POWER_BOUND 0x27 #define POWER_BOUND_5G 0x2b -@@ -3261,6 +3466,9 @@ static void rt2800_config_channel(struct +@@ -3238,6 +3443,9 @@ static void rt2800_config_channel(struct case RF3322: rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info); break; diff --git a/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch b/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch index 3b50775499..f006304e7f 100644 --- a/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch +++ b/package/kernel/mac80211/patches/600-0013-rt2x00-rt2800lib-enable-RF3853-support.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: enable RF3853 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 1 + + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 + 1 file changed, 1 insertion(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7430,6 +7430,7 @@ static int rt2800_init_eeprom(struct rt2 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7407,6 +7407,7 @@ static int rt2800_init_eeprom(struct rt2 case RF3290: case RF3320: case RF3322: diff --git a/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch b/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch index 4dfb068e2f..a56bfa865e 100644 --- a/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch +++ b/package/kernel/mac80211/patches/600-0014-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch @@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add MAC register initialization for Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800.h | 14 ++++++++++++++ - drivers/net/wireless/rt2x00/rt2800lib.c | 19 ++++++++++++++++--- + drivers/net/wireless/ralink/rt2x00/rt2800.h | 14 ++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 19 ++++++++++++++++--- 2 files changed, 30 insertions(+), 3 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -1588,6 +1588,20 @@ #define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00) @@ -33,9 +33,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> * RX_FILTER_CFG: RX configuration register. */ #define RX_FILTER_CFG 0x1400 ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -5005,6 +5005,12 @@ static int rt2800_init_registers(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4982,6 +4982,12 @@ static int rt2800_init_registers(struct rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); } @@ -48,7 +48,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> } else if (rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392) || rt2x00_rt(rt2x00dev, RT5592)) { -@@ -5035,9 +5041,11 @@ static int rt2800_init_registers(struct +@@ -5012,9 +5018,11 @@ static int rt2800_init_registers(struct rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®); rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); @@ -63,7 +63,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); else rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); -@@ -5190,6 +5198,11 @@ static int rt2800_init_registers(struct +@@ -5167,6 +5175,11 @@ static int rt2800_init_registers(struct reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002; rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg); diff --git a/package/kernel/mac80211/patches/600-0015-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch b/package/kernel/mac80211/patches/600-0015-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch index 837c025b84..d68ad50447 100644 --- a/package/kernel/mac80211/patches/600-0015-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch +++ b/package/kernel/mac80211/patches/600-0015-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch @@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800soc: fix rt2800soc_disable_radio for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800soc.c | 9 ++++++++- + drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800soc.c -+++ b/drivers/net/wireless/rt2x00/rt2800soc.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c @@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev) diff --git a/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch b/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch index 6663b785d8..953263226c 100644 --- a/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch +++ b/package/kernel/mac80211/patches/600-0016-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch @@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add BBP register initialization for Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -5808,6 +5808,47 @@ static void rt2800_init_bbp_3593(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -5785,6 +5785,47 @@ static void rt2800_init_bbp_3593(struct rt2800_bbp_write(rt2x00dev, 103, 0xc0); } @@ -59,7 +59,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) { int ant, div_mode; -@@ -6026,6 +6067,9 @@ static void rt2800_init_bbp(struct rt2x0 +@@ -6003,6 +6044,9 @@ static void rt2800_init_bbp(struct rt2x0 case RT3593: rt2800_init_bbp_3593(rt2x00dev); return; diff --git a/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch b/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch index 6e66f1430a..936fa35a00 100644 --- a/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0017-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add RFCSR initialization for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800.h | 1 + - drivers/net/wireless/rt2x00/rt2800lib.c | 141 +++++++++++++++++++++++++++++++ + drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 + + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 141 +++++++++++++++++++++++++++++++ 2 files changed, 142 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -2171,6 +2171,7 @@ struct mac_iveiv_entry { /* * RFCSR 2: @@ -19,9 +19,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> #define RFCSR2_RESCAL_EN FIELD8(0x80) /* ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -6843,6 +6843,144 @@ static void rt2800_init_rfcsr_3593(struc +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -6820,6 +6820,144 @@ static void rt2800_init_rfcsr_3593(struc /* TODO: enable stream mode support */ } @@ -166,7 +166,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) { rt2800_rf_init_calibration(rt2x00dev, 2); -@@ -7074,6 +7212,9 @@ static void rt2800_init_rfcsr(struct rt2 +@@ -7051,6 +7189,9 @@ static void rt2800_init_rfcsr(struct rt2 case RT3390: rt2800_init_rfcsr_3390(rt2x00dev); break; diff --git a/package/kernel/mac80211/patches/600-0018-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch b/package/kernel/mac80211/patches/600-0018-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch index 57af96106f..ae899f73be 100644 --- a/package/kernel/mac80211/patches/600-0018-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch +++ b/package/kernel/mac80211/patches/600-0018-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch @@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800lib: use the extended EEPROM map for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -342,7 +342,8 @@ static unsigned int rt2800_eeprom_word_i wiphy_name(rt2x00dev->hw->wiphy), word)) return 0; diff --git a/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch b/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch index 9390f7ecfb..bcaf67677d 100644 --- a/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0019-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: force rf type to RF3853 on RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++ 1 file changed, 2 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7611,6 +7611,8 @@ static int rt2800_init_eeprom(struct rt2 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7588,6 +7588,8 @@ static int rt2800_init_eeprom(struct rt2 rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392)) rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf); diff --git a/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch b/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch index 1cba4f68c1..3169c1048d 100644 --- a/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch +++ b/package/kernel/mac80211/patches/600-0020-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: add channel configuration code for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 72 +++++++++++++++++++++++++++++-- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 72 +++++++++++++++++++++++++++++-- 1 file changed, 69 insertions(+), 3 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -3429,6 +3429,36 @@ static char rt2800_txpower_to_dev(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -3406,6 +3406,36 @@ static char rt2800_txpower_to_dev(struct return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER); } @@ -47,7 +47,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, struct rf_channel *rf, -@@ -3447,6 +3477,12 @@ static void rt2800_config_channel(struct +@@ -3424,6 +3454,12 @@ static void rt2800_config_channel(struct rt2800_txpower_to_dev(rt2x00dev, rf->channel, info->default_power3); @@ -60,7 +60,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> switch (rt2x00dev->chip.rf) { case RF2020: case RF3020: -@@ -3530,6 +3566,15 @@ static void rt2800_config_channel(struct +@@ -3507,6 +3543,15 @@ static void rt2800_config_channel(struct rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 77, 0x98); @@ -76,7 +76,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> } else { rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); -@@ -3542,6 +3587,7 @@ static void rt2800_config_channel(struct +@@ -3519,6 +3564,7 @@ static void rt2800_config_channel(struct !rt2x00_rt(rt2x00dev, RT5392)) { if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { rt2800_bbp_write(rt2x00dev, 82, 0x62); @@ -84,7 +84,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> rt2800_bbp_write(rt2x00dev, 75, 0x46); } else { if (rt2x00_rt(rt2x00dev, RT3593)) -@@ -3550,19 +3596,22 @@ static void rt2800_config_channel(struct +@@ -3527,19 +3573,22 @@ static void rt2800_config_channel(struct rt2800_bbp_write(rt2x00dev, 82, 0x84); rt2800_bbp_write(rt2x00dev, 75, 0x50); } @@ -110,7 +110,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> rt2800_bbp_write(rt2x00dev, 83, 0x9a); if (rt2x00_has_cap_external_lna_a(rt2x00dev)) -@@ -3684,6 +3733,23 @@ static void rt2800_config_channel(struct +@@ -3661,6 +3710,23 @@ static void rt2800_config_channel(struct rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); diff --git a/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch b/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch index 177312845f..fa646d2faf 100644 --- a/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch +++ b/package/kernel/mac80211/patches/600-0021-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix txpower_to_dev function for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++-- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -3416,13 +3416,15 @@ static char rt2800_txpower_to_dev(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -3393,13 +3393,15 @@ static char rt2800_txpower_to_dev(struct unsigned int channel, char txpower) { diff --git a/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch b/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch index 36f0a4cc06..c06876906b 100644 --- a/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch +++ b/package/kernel/mac80211/patches/600-0022-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch @@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: use correct txpower calculation function Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -4635,7 +4635,8 @@ static void rt2800_config_txpower(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4612,7 +4612,8 @@ static void rt2800_config_txpower(struct struct ieee80211_channel *chan, int power_level) { diff --git a/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch b/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch index 8119f975b0..74d80ded1d 100644 --- a/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch +++ b/package/kernel/mac80211/patches/600-0023-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch @@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: hardcode txmixer gain values to zero for Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++-- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7493,7 +7493,8 @@ static u8 rt2800_get_txmixer_gain_24g(st +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7470,7 +7470,8 @@ static u8 rt2800_get_txmixer_gain_24g(st { u16 word; @@ -21,7 +21,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> return 0; rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word); -@@ -7507,7 +7508,8 @@ static u8 rt2800_get_txmixer_gain_5g(str +@@ -7484,7 +7485,8 @@ static u8 rt2800_get_txmixer_gain_5g(str { u16 word; diff --git a/package/kernel/mac80211/patches/600-0024-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch b/package/kernel/mac80211/patches/600-0024-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch index 53435aa17e..125928642f 100644 --- a/package/kernel/mac80211/patches/600-0024-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0024-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch @@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800lib: use correct [RT]XWI size for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 1 + + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 + 1 file changed, 1 insertion(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -558,6 +558,7 @@ void rt2800_get_txwi_rxwi_size(struct rt { switch (rt2x00dev->chip.rt) { diff --git a/package/kernel/mac80211/patches/600-0025-rt2x00-rt2800lib-use-correct-beacon-base-for-RT3883.patch b/package/kernel/mac80211/patches/600-0025-rt2x00-rt2800lib-use-correct-beacon-base-for-RT3883.patch index 08f3f88797..0dcc027ffc 100644 --- a/package/kernel/mac80211/patches/600-0025-rt2x00-rt2800lib-use-correct-beacon-base-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0025-rt2x00-rt2800lib-use-correct-beacon-base-for-RT3883.patch @@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800lib: use correct beacon base for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -983,7 +983,8 @@ EXPORT_SYMBOL_GPL(rt2800_txdone_entry); static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev, unsigned int index) diff --git a/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch b/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch index dfbdee7228..6ce224aba2 100644 --- a/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0026-rt2x00-rt2800lib-use-correct-beacon-count-for-RT3883.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: use correct beacon count for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -8428,7 +8428,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -8403,7 +8403,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (rt2x00_rt(rt2x00dev, RT3593)) __set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags); diff --git a/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch b/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch index 22f7110a7e..39363685f4 100644 --- a/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch +++ b/package/kernel/mac80211/patches/600-0027-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix antenna configuration for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -1961,7 +1961,8 @@ void rt2800_config_ant(struct rt2x00_dev +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -1938,7 +1938,8 @@ void rt2800_config_ant(struct rt2x00_dev rt2800_bbp_write(rt2x00dev, 3, r3); rt2800_bbp_write(rt2x00dev, 1, r1); diff --git a/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch b/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch index 9945f38fbd..f0285874da 100644 --- a/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch +++ b/package/kernel/mac80211/patches/600-0028-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix LNA gain configuration for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++-- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -1984,7 +1984,8 @@ static void rt2800_config_lna_gain(struc +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -1961,7 +1961,8 @@ static void rt2800_config_lna_gain(struc rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); } else if (libconf->rf.channel <= 128) { @@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom); lna_gain = rt2x00_get_field16(eeprom, EEPROM_EXT_LNA2_A1); -@@ -1994,7 +1995,8 @@ static void rt2800_config_lna_gain(struc +@@ -1971,7 +1972,8 @@ static void rt2800_config_lna_gain(struc EEPROM_RSSI_BG2_LNA_A1); } } else { diff --git a/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch b/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch index beadea88b7..ab8c625c13 100644 --- a/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0029-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix VGC setup for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 11 +++++++++-- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -4835,7 +4835,8 @@ static u8 rt2800_get_default_vgc(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -4812,7 +4812,8 @@ static u8 rt2800_get_default_vgc(struct else vgc = 0x2e + rt2x00dev->lna_gain; } else { /* 5GHZ band */ @@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; else if (rt2x00_rt(rt2x00dev, RT5592)) vgc = 0x24 + (2 * rt2x00dev->lna_gain); -@@ -4855,7 +4856,8 @@ static inline void rt2800_set_vgc(struct +@@ -4832,7 +4833,8 @@ static inline void rt2800_set_vgc(struct { if (qual->vgc_level != vgc_level) { if (rt2x00_rt(rt2x00dev, RT3572) || @@ -30,7 +30,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level); } else if (rt2x00_rt(rt2x00dev, RT5592)) { -@@ -4902,6 +4904,11 @@ void rt2800_link_tuner(struct rt2x00_dev +@@ -4879,6 +4881,11 @@ void rt2800_link_tuner(struct rt2x00_dev } break; diff --git a/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch b/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch index a6c0f588f7..49830a12f5 100644 --- a/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch +++ b/package/kernel/mac80211/patches/600-0030-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix EEPROM LNA validation for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 9 ++++++--- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7630,7 +7630,8 @@ static int rt2800_validate_eeprom(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7607,7 +7607,8 @@ static int rt2800_validate_eeprom(struct rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); @@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, -@@ -7650,7 +7651,8 @@ static int rt2800_validate_eeprom(struct +@@ -7627,7 +7628,8 @@ static int rt2800_validate_eeprom(struct rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); @@ -30,7 +30,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, -@@ -7658,7 +7660,8 @@ static int rt2800_validate_eeprom(struct +@@ -7635,7 +7637,8 @@ static int rt2800_validate_eeprom(struct } rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); diff --git a/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch b/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch index 910f9ecd2c..6e228479b0 100644 --- a/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-0031-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch @@ -5,12 +5,12 @@ Subject: [PATCH] rt2x00: rt2800lib: fix txpower compensation for RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 3 +++ + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 +++ 1 file changed, 3 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -4005,6 +4005,9 @@ static u8 rt2800_compensate_txpower(stru +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -3982,6 +3982,9 @@ static u8 rt2800_compensate_txpower(stru if (rt2x00_rt(rt2x00dev, RT3593)) return min_t(u8, txpower, 0xc); diff --git a/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch b/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch index bcdfc6728e..25753af81b 100644 --- a/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch +++ b/package/kernel/mac80211/patches/600-0032-rt2x00-rt2800lib-enable-RT2800_HAS_HIGH_SHARED_MEM-f.patch @@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800lib: enable RT2800_HAS_HIGH_SHARED_MEM for Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -8441,7 +8441,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -8416,7 +8416,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r if (retval) return retval; diff --git a/package/kernel/mac80211/patches/600-0033-rt2x00-rt2800lib-use-high-memory-for-beacons-on-RT38.patch b/package/kernel/mac80211/patches/600-0033-rt2x00-rt2800lib-use-high-memory-for-beacons-on-RT38.patch index dc06e6a64b..4f2e754869 100644 --- a/package/kernel/mac80211/patches/600-0033-rt2x00-rt2800lib-use-high-memory-for-beacons-on-RT38.patch +++ b/package/kernel/mac80211/patches/600-0033-rt2x00-rt2800lib-use-high-memory-for-beacons-on-RT38.patch @@ -5,11 +5,11 @@ Subject: [PATCH] rt2x00: rt2800lib: use high memory for beacons on RT3883 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++- + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -97,7 +97,8 @@ static inline void rt2800_shared_mem_sel static inline bool rt2800_beacon_uses_high_mem(struct rt2x00_dev *rt2x00dev) diff --git a/package/kernel/mac80211/patches/600-0034-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch b/package/kernel/mac80211/patches/600-0034-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch index 212eb4e744..a497b5eead 100644 --- a/package/kernel/mac80211/patches/600-0034-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch +++ b/package/kernel/mac80211/patches/600-0034-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch @@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: rt2800mmio: add a workaround for spurious Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800mmio.c | 72 +++++++++++++++++++++++++----- - drivers/net/wireless/rt2x00/rt2x00.h | 5 +++ + drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 72 +++++++++++++++++++++++++----- + drivers/net/wireless/ralink/rt2x00/rt2x00.h | 5 +++ 2 files changed, 65 insertions(+), 12 deletions(-) ---- a/drivers/net/wireless/rt2x00/rt2800mmio.c -+++ b/drivers/net/wireless/rt2x00/rt2800mmio.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c @@ -415,9 +415,9 @@ void rt2800mmio_autowake_tasklet(unsigne } EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet); @@ -120,9 +120,9 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> /* * Never disable the TX_FIFO_STATUS interrupt. */ ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -987,6 +987,11 @@ struct rt2x00_dev { +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h +@@ -991,6 +991,11 @@ struct rt2x00_dev { int rf_channel; /* diff --git a/package/kernel/mac80211/patches/601-rt2x00-set_pci_mwi.patch b/package/kernel/mac80211/patches/601-rt2x00-set_pci_mwi.patch index 08c8fa651c..a40716163f 100644 --- a/package/kernel/mac80211/patches/601-rt2x00-set_pci_mwi.patch +++ b/package/kernel/mac80211/patches/601-rt2x00-set_pci_mwi.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/rt2x00pci.c -+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.c @@ -94,8 +94,10 @@ int rt2x00pci_probe(struct pci_dev *pci_ pci_set_master(pci_dev); diff --git a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch index 8c71075b5c..7a183a404b 100644 --- a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch +++ b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00_platform_h.patch @@ -20,8 +20,8 @@ +}; + +#endif /* _RT2X00_PLATFORM_H */ ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h @@ -38,6 +38,7 @@ #include <linux/kfifo.h> #include <linux/hrtimer.h> diff --git a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch index 8f650a28e5..bc056cd735 100644 --- a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch +++ b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch @@ -1,15 +1,15 @@ --- a/.local-symbols +++ b/.local-symbols -@@ -263,6 +263,7 @@ RT2X00_LIB_FIRMWARE= +@@ -329,6 +329,7 @@ RT2X00_LIB_FIRMWARE= RT2X00_LIB_CRYPTO= RT2X00_LIB_LEDS= RT2X00_LIB_DEBUGFS= +RT2X00_LIB_EEPROM= RT2X00_DEBUG= - RTL_CARDS= - RTL8192CE= ---- a/drivers/net/wireless/rt2x00/Kconfig -+++ b/drivers/net/wireless/rt2x00/Kconfig + WLAN_VENDOR_REALTEK= + RTL8180= +--- a/drivers/net/wireless/ralink/rt2x00/Kconfig ++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig @@ -69,6 +69,7 @@ config RT2800PCI select RT2X00_LIB_MMIO select RT2X00_LIB_PCI @@ -26,7 +26,7 @@ select RT2800_LIB select RT2800_LIB_MMIO ---help--- -@@ -266,6 +268,9 @@ config RT2X00_LIB_FIRMWARE +@@ -265,6 +267,9 @@ config RT2X00_LIB_FIRMWARE config RT2X00_LIB_CRYPTO bool @@ -36,8 +36,8 @@ config RT2X00_LIB_LEDS bool default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) ---- a/drivers/net/wireless/rt2x00/Makefile -+++ b/drivers/net/wireless/rt2x00/Makefile +--- a/drivers/net/wireless/ralink/rt2x00/Makefile ++++ b/drivers/net/wireless/ralink/rt2x00/Makefile @@ -7,6 +7,7 @@ rt2x00lib-$(CPTCFG_RT2X00_LIB_DEBUGFS) + rt2x00lib-$(CPTCFG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o rt2x00lib-$(CPTCFG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o @@ -46,9 +46,9 @@ obj-$(CPTCFG_RT2X00_LIB) += rt2x00lib.o obj-$(CPTCFG_RT2X00_LIB_MMIO) += rt2x00mmio.o ---- a/drivers/net/wireless/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/rt2x00/rt2800lib.h -@@ -43,6 +43,8 @@ struct rt2800_drv_data { +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h +@@ -46,6 +46,8 @@ struct rt2800_drv_data { } shmem_lock; }; @@ -57,7 +57,7 @@ struct rt2800_ops { void (*register_read)(struct rt2x00_dev *rt2x00dev, const unsigned int offset, u32 *value); -@@ -176,6 +178,15 @@ static inline int rt2800_read_eeprom(str +@@ -179,6 +181,15 @@ static inline int rt2800_read_eeprom(str { const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; @@ -73,8 +73,8 @@ return rt2800ops->read_eeprom(rt2x00dev); } ---- a/drivers/net/wireless/rt2x00/rt2800soc.c -+++ b/drivers/net/wireless/rt2x00/rt2800soc.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c @@ -102,19 +102,6 @@ static int rt2800soc_set_device_state(st return retval; } @@ -103,9 +103,9 @@ .hwcrypt_disabled = rt2800soc_hwcrypt_disabled, .drv_write_firmware = rt2800soc_write_firmware, .drv_init_registers = rt2800mmio_init_registers, ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -695,6 +695,7 @@ enum rt2x00_capability_flags { +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h +@@ -697,6 +697,7 @@ enum rt2x00_capability_flags { REQUIRE_HT_TX_DESC, REQUIRE_PS_AUTOWAKE, REQUIRE_DELAYED_RFKILL, @@ -113,7 +113,7 @@ /* * Capabilities -@@ -964,6 +965,11 @@ struct rt2x00_dev { +@@ -968,6 +969,11 @@ struct rt2x00_dev { const struct firmware *fw; /* @@ -125,9 +125,9 @@ * FIFO for storing tx status reports between isr and tasklet. */ DECLARE_KFIFO_PTR(txstatus_fifo, u32); ---- a/drivers/net/wireless/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c -@@ -1334,6 +1334,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +@@ -1335,6 +1335,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup); INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep); @@ -138,7 +138,7 @@ /* * Let the driver probe the device to detect the capabilities. */ -@@ -1474,6 +1478,11 @@ void rt2x00lib_remove_dev(struct rt2x00_ +@@ -1475,6 +1479,11 @@ void rt2x00lib_remove_dev(struct rt2x00_ * Free the driver data. */ kfree(rt2x00dev->drv_data); @@ -151,7 +151,7 @@ EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); --- /dev/null -+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c @@ -0,0 +1,111 @@ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> @@ -264,8 +264,8 @@ + release_firmware(rt2x00dev->eeprom_file); + rt2x00dev->eeprom_file = NULL; +} ---- a/drivers/net/wireless/rt2x00/rt2x00lib.h -+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00lib.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00lib.h @@ -320,6 +320,22 @@ static inline void rt2x00lib_free_firmwa #endif /* CPTCFG_RT2X00_LIB_FIRMWARE */ @@ -289,8 +289,8 @@ * Debugfs handlers. */ #ifdef CPTCFG_RT2X00_LIB_DEBUGFS ---- a/drivers/net/wireless/rt2x00/rt2x00soc.c -+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c @@ -92,6 +92,7 @@ int rt2x00soc_probe(struct platform_devi rt2x00dev->hw = hw; rt2x00dev->irq = platform_get_irq(pdev, 0); diff --git a/package/kernel/mac80211/patches/604-rt2x00-of_load_eeprom_filename.patch b/package/kernel/mac80211/patches/604-rt2x00-of_load_eeprom_filename.patch index 4bc6f37adb..9dffef1812 100644 --- a/package/kernel/mac80211/patches/604-rt2x00-of_load_eeprom_filename.patch +++ b/package/kernel/mac80211/patches/604-rt2x00-of_load_eeprom_filename.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/rt2x00eeprom.c -+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c @@ -26,6 +26,7 @@ #include <linux/kernel.h> diff --git a/package/kernel/mac80211/patches/605-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch b/package/kernel/mac80211/patches/605-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch index 75f0415b73..5dceff8794 100644 --- a/package/kernel/mac80211/patches/605-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch +++ b/package/kernel/mac80211/patches/605-rt2x00-load-eeprom-on-SoC-from-a-mtd-device-defines-.patch @@ -6,12 +6,12 @@ Subject: [PATCH] rt2x00: load eeprom on SoC from a mtd device defines inside Signed-off-by: John Crispin <blogic@openwrt.org> --- - drivers/net/wireless/rt2x00/Kconfig | 1 + - drivers/net/wireless/rt2x00/rt2800pci.c | 44 ++++++++++++++++++++++++++----- + drivers/net/wireless/ralink/rt2x00/Kconfig | 1 + + drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 44 ++++++++++++++++++++++++++----- 2 files changed, 39 insertions(+), 6 deletions(-) ---- a/drivers/net/wireless/rt2x00/Kconfig -+++ b/drivers/net/wireless/rt2x00/Kconfig +--- a/drivers/net/wireless/ralink/rt2x00/Kconfig ++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig @@ -219,6 +219,7 @@ config RT2800SOC select RT2X00_LIB_EEPROM select RT2800_LIB @@ -20,8 +20,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ---help--- This adds support for Ralink WiSoC devices. Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352. ---- a/drivers/net/wireless/rt2x00/rt2x00eeprom.c -+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c @@ -26,11 +26,66 @@ #include <linux/kernel.h> @@ -79,7 +79,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + if (!ret) { + rt2x00dev->eeprom_file = &mtd_fw; + mtd_fw.size = len; -+ mtd_fw.data = rt2x00dev->eeprom; ++ mtd_fw.data = (const u8 *) rt2x00dev->eeprom; + } +#endif + diff --git a/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch b/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch index 70f7b783ad..d923e05c77 100644 --- a/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch +++ b/package/kernel/mac80211/patches/607-rt2x00-allow_disabling_bands_through_platform_data.patch @@ -10,8 +10,8 @@ }; #endif /* _RT2X00_PLATFORM_H */ ---- a/drivers/net/wireless/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c @@ -940,6 +940,22 @@ static int rt2x00lib_probe_hw_modes(stru unsigned int num_rates; unsigned int i; @@ -35,9 +35,9 @@ num_rates = 0; if (spec->supported_rates & SUPPORT_RATE_CCK) num_rates += 4; ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -403,6 +403,7 @@ struct hw_mode_spec { +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h +@@ -405,6 +405,7 @@ struct hw_mode_spec { unsigned int supported_bands; #define SUPPORT_BAND_2GHZ 0x00000001 #define SUPPORT_BAND_5GHZ 0x00000002 diff --git a/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch b/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch index a35bd55a7c..a645ba176e 100644 --- a/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch +++ b/package/kernel/mac80211/patches/608-add_platform_data_mac_addr.patch @@ -8,8 +8,8 @@ int disable_2ghz; int disable_5ghz; ---- a/drivers/net/wireless/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c @@ -931,6 +931,18 @@ static void rt2x00lib_rate(struct ieee80 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE; } @@ -29,9 +29,9 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, struct hw_mode_spec *spec) { ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -1410,6 +1410,7 @@ static inline void rt2x00debug_dump_fram +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h +@@ -1414,6 +1414,7 @@ static inline void rt2x00debug_dump_fram */ u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif); @@ -39,8 +39,8 @@ /* * Interrupt context handlers. ---- a/drivers/net/wireless/rt2x00/rt61pci.c -+++ b/drivers/net/wireless/rt2x00/rt61pci.c +--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c @@ -2392,6 +2392,7 @@ static int rt61pci_validate_eeprom(struc u32 reg; u16 word; diff --git a/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch b/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch index 63a8641464..3fdaae759b 100644 --- a/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch +++ b/package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/slab.h> diff --git a/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch b/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch index 067d2eaf73..c69d33025d 100644 --- a/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch +++ b/package/kernel/mac80211/patches/610-rt2x00-fix-rt3352-ext-pa.patch @@ -1,6 +1,6 @@ ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -3552,11 +3552,18 @@ static void rt2800_config_channel(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -3529,11 +3529,18 @@ static void rt2800_config_channel(struct /* * Change BBP settings */ @@ -19,7 +19,7 @@ } else if (rt2x00_rt(rt2x00dev, RT3593)) { if (rf->channel > 14) { /* Disable CCK Packet detection on 5GHz */ -@@ -6618,6 +6625,12 @@ static void rt2800_init_rfcsr_3290(struc +@@ -6595,6 +6602,12 @@ static void rt2800_init_rfcsr_3290(struc static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev) { @@ -32,7 +32,7 @@ rt2800_rf_init_calibration(rt2x00dev, 30); rt2800_rfcsr_write(rt2x00dev, 0, 0xf0); -@@ -6653,15 +6666,30 @@ static void rt2800_init_rfcsr_3352(struc +@@ -6630,15 +6643,30 @@ static void rt2800_init_rfcsr_3352(struc rt2800_rfcsr_write(rt2x00dev, 31, 0x80); rt2800_rfcsr_write(rt2x00dev, 32, 0x80); rt2800_rfcsr_write(rt2x00dev, 33, 0x00); @@ -66,7 +66,7 @@ rt2800_rfcsr_write(rt2x00dev, 43, 0xdb); rt2800_rfcsr_write(rt2x00dev, 44, 0xdb); rt2800_rfcsr_write(rt2x00dev, 45, 0xdb); -@@ -6669,15 +6697,20 @@ static void rt2800_init_rfcsr_3352(struc +@@ -6646,15 +6674,20 @@ static void rt2800_init_rfcsr_3352(struc rt2800_rfcsr_write(rt2x00dev, 47, 0x0d); rt2800_rfcsr_write(rt2x00dev, 48, 0x14); rt2800_rfcsr_write(rt2x00dev, 49, 0x00); @@ -96,7 +96,7 @@ rt2800_rfcsr_write(rt2x00dev, 59, 0x00); rt2800_rfcsr_write(rt2x00dev, 60, 0x00); rt2800_rfcsr_write(rt2x00dev, 61, 0x00); -@@ -7698,6 +7731,7 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7675,6 +7708,7 @@ static int rt2800_init_eeprom(struct rt2 * RT53xx: defined in "EEPROM_CHIP_ID" field */ if (rt2x00_rt(rt2x00dev, RT3290) || @@ -104,7 +104,7 @@ rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392)) rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf); -@@ -7793,7 +7827,8 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7770,7 +7804,8 @@ static int rt2800_init_eeprom(struct rt2 /* * Detect if this device has Bluetooth co-existence. */ @@ -114,7 +114,7 @@ __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags); /* -@@ -7822,6 +7857,22 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7799,6 +7834,22 @@ static int rt2800_init_eeprom(struct rt2 EIRP_MAX_TX_POWER_LIMIT) __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags); @@ -137,8 +137,8 @@ return 0; } ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -2335,6 +2335,12 @@ struct mac_iveiv_entry { #define RFCSR36_RF_BS FIELD8(0x80) @@ -198,9 +198,9 @@ /* * EEPROM frequency ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -715,6 +715,8 @@ enum rt2x00_capability_flags { +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h +@@ -717,6 +717,8 @@ enum rt2x00_capability_flags { CAPABILITY_DOUBLE_ANTENNA, CAPABILITY_BT_COEXIST, CAPABILITY_VCO_RECALIBRATION, diff --git a/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch b/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch index 1dcca36c21..b44fe900d5 100644 --- a/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch +++ b/package/kernel/mac80211/patches/611-rt2x00-rf_vals-rt3352-xtal20.patch @@ -1,6 +1,6 @@ ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -8209,6 +8209,27 @@ static const struct rf_channel rf_vals_5 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -8186,6 +8186,27 @@ static const struct rf_channel rf_vals_5 {196, 83, 0, 12, 1}, }; @@ -28,7 +28,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; -@@ -8297,7 +8318,10 @@ static int rt2800_probe_hw_mode(struct r +@@ -8272,7 +8293,10 @@ static int rt2800_probe_hw_mode(struct r case RF5390: case RF5392: spec->num_channels = 14; @@ -40,7 +40,7 @@ break; case RF3052: -@@ -8481,6 +8505,19 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -8456,6 +8480,19 @@ static int rt2800_probe_rt(struct rt2x00 return 0; } @@ -60,7 +60,7 @@ int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev) { struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; -@@ -8523,6 +8560,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r +@@ -8498,6 +8535,15 @@ int rt2800_probe_hw(struct rt2x00_dev *r rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); /* @@ -76,9 +76,9 @@ * Initialize hw specifications. */ retval = rt2800_probe_hw_mode(rt2x00dev); ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h -@@ -398,6 +398,7 @@ static inline struct rt2x00_intf* vif_to +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h +@@ -400,6 +400,7 @@ static inline struct rt2x00_intf* vif_to * @channels: Device/chipset specific channel values (See &struct rf_channel). * @channels_info: Additional information for channels (See &struct channel_info). * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap). @@ -86,7 +86,7 @@ */ struct hw_mode_spec { unsigned int supported_bands; -@@ -414,6 +415,7 @@ struct hw_mode_spec { +@@ -416,6 +417,7 @@ struct hw_mode_spec { const struct channel_info *channels_info; struct ieee80211_sta_ht_cap ht; diff --git a/package/kernel/mac80211/patches/612-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch b/package/kernel/mac80211/patches/612-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch index 1970efc08c..e4b028b1a9 100644 --- a/package/kernel/mac80211/patches/612-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch +++ b/package/kernel/mac80211/patches/612-rt2x00-make-wmac-loadable-via-OF-on-rt288x-305x-SoC.patch @@ -8,11 +8,11 @@ devicetree. Signed-off-by: John Crispin <blogic@openwrt.org> --- - drivers/net/wireless/rt2x00/rt2800pci.c | 7 +++++++ + drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 7 +++++++ 1 file changed, 7 insertions(+) ---- a/drivers/net/wireless/rt2x00/rt2800soc.c -+++ b/drivers/net/wireless/rt2x00/rt2800soc.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c @@ -237,10 +237,17 @@ static int rt2800soc_probe(struct platfo return rt2x00soc_probe(pdev, &rt2800soc_ops); } diff --git a/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch b/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch index c779a1732c..8e3bd2a362 100644 --- a/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch +++ b/package/kernel/mac80211/patches/615-rt2x00-fix_20mhz_clk.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -36,6 +36,7 @@ #include <linux/kernel.h> #include <linux/module.h> @@ -8,7 +8,7 @@ #include "rt2x00.h" #include "rt2800lib.h" -@@ -8507,13 +8508,14 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -8482,13 +8483,14 @@ static int rt2800_probe_rt(struct rt2x00 int rt2800_probe_clk(struct rt2x00_dev *rt2x00dev) { diff --git a/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch b/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch index 840b3bc964..faa5879de6 100644 --- a/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch +++ b/package/kernel/mac80211/patches/616-rt2x00-support-rt5350.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -74,6 +74,7 @@ #define RF3070 0x3070 #define RF3290 0x3290 @@ -8,9 +8,9 @@ #define RF5360 0x5360 #define RF5362 0x5362 #define RF5370 0x5370 ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -3038,6 +3038,13 @@ static void rt2800_config_channel_rf53xx +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -3015,6 +3015,13 @@ static void rt2800_config_channel_rf53xx rt2800_rfcsr_write(rt2x00dev, 59, r59_non_bt[idx]); @@ -24,7 +24,7 @@ } } } -@@ -3516,6 +3523,7 @@ static void rt2800_config_channel(struct +@@ -3493,6 +3500,7 @@ static void rt2800_config_channel(struct rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info); break; case RF3070: @@ -32,7 +32,7 @@ case RF5360: case RF5362: case RF5370: -@@ -3534,6 +3542,7 @@ static void rt2800_config_channel(struct +@@ -3511,6 +3519,7 @@ static void rt2800_config_channel(struct if (rt2x00_rf(rt2x00dev, RF3070) || rt2x00_rf(rt2x00dev, RF3290) || rt2x00_rf(rt2x00dev, RF3322) || @@ -40,7 +40,7 @@ rt2x00_rf(rt2x00dev, RF5360) || rt2x00_rf(rt2x00dev, RF5362) || rt2x00_rf(rt2x00dev, RF5370) || -@@ -3812,7 +3821,8 @@ static void rt2800_config_channel(struct +@@ -3789,7 +3798,8 @@ static void rt2800_config_channel(struct /* * Clear update flag */ @@ -50,7 +50,7 @@ rt2800_bbp_read(rt2x00dev, 49, &bbp); rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0); rt2800_bbp_write(rt2x00dev, 49, bbp); -@@ -4698,6 +4708,7 @@ void rt2800_vco_calibration(struct rt2x0 +@@ -4675,6 +4685,7 @@ void rt2800_vco_calibration(struct rt2x0 case RF3070: case RF3290: case RF3853: @@ -58,7 +58,7 @@ case RF5360: case RF5362: case RF5370: -@@ -5111,6 +5122,8 @@ static int rt2800_init_registers(struct +@@ -5088,6 +5099,8 @@ static int rt2800_init_registers(struct rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); @@ -67,7 +67,7 @@ } else { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); -@@ -5766,9 +5779,13 @@ static void rt2800_init_bbp_3352(struct +@@ -5743,9 +5756,13 @@ static void rt2800_init_bbp_3352(struct rt2800_bbp_write(rt2x00dev, 82, 0x62); @@ -84,7 +84,7 @@ rt2800_bbp_write(rt2x00dev, 86, 0x38); -@@ -5782,9 +5799,13 @@ static void rt2800_init_bbp_3352(struct +@@ -5759,9 +5776,13 @@ static void rt2800_init_bbp_3352(struct rt2800_bbp_write(rt2x00dev, 104, 0x92); @@ -101,7 +101,7 @@ rt2800_bbp_write(rt2x00dev, 120, 0x50); -@@ -5809,6 +5830,13 @@ static void rt2800_init_bbp_3352(struct +@@ -5786,6 +5807,13 @@ static void rt2800_init_bbp_3352(struct rt2800_bbp_write(rt2x00dev, 143, 0xa2); rt2800_bbp_write(rt2x00dev, 148, 0xc8); @@ -115,7 +115,7 @@ } static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev) -@@ -6150,6 +6178,7 @@ static void rt2800_init_bbp(struct rt2x0 +@@ -6127,6 +6155,7 @@ static void rt2800_init_bbp(struct rt2x0 rt2800_init_bbp_3290(rt2x00dev); break; case RT3352: @@ -123,7 +123,7 @@ rt2800_init_bbp_3352(rt2x00dev); break; case RT3390: -@@ -7101,6 +7130,76 @@ static void rt2800_init_rfcsr_3883(struc +@@ -7078,6 +7107,76 @@ static void rt2800_init_rfcsr_3883(struc rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); } @@ -200,7 +200,7 @@ static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) { rt2800_rf_init_calibration(rt2x00dev, 2); -@@ -7341,6 +7440,9 @@ static void rt2800_init_rfcsr(struct rt2 +@@ -7318,6 +7417,9 @@ static void rt2800_init_rfcsr(struct rt2 case RT3593: rt2800_init_rfcsr_3593(rt2x00dev); break; @@ -210,7 +210,7 @@ case RT5390: rt2800_init_rfcsr_5390(rt2x00dev); break; -@@ -7600,6 +7702,12 @@ static int rt2800_validate_eeprom(struct +@@ -7577,6 +7679,12 @@ static int rt2800_validate_eeprom(struct rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820); rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word); rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word); @@ -223,7 +223,7 @@ } else if (rt2x00_rt(rt2x00dev, RT2860) || rt2x00_rt(rt2x00dev, RT2872)) { /* -@@ -7738,6 +7846,8 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7715,6 +7823,8 @@ static int rt2800_init_eeprom(struct rt2 rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf); else if (rt2x00_rt(rt2x00dev, RT3883)) rf = RF3853; @@ -232,7 +232,7 @@ else rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE); -@@ -7757,6 +7867,7 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7734,6 +7844,7 @@ static int rt2800_init_eeprom(struct rt2 case RF3320: case RF3322: case RF3853: @@ -240,7 +240,7 @@ case RF5360: case RF5362: case RF5370: -@@ -8312,6 +8423,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8287,6 +8398,7 @@ static int rt2800_probe_hw_mode(struct r case RF3290: case RF3320: case RF3322: @@ -248,7 +248,7 @@ case RF5360: case RF5362: case RF5370: -@@ -8451,6 +8563,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8426,6 +8538,7 @@ static int rt2800_probe_hw_mode(struct r case RF3070: case RF3290: case RF3853: @@ -256,7 +256,7 @@ case RF5360: case RF5362: case RF5370: -@@ -8491,6 +8604,7 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -8466,6 +8579,7 @@ static int rt2800_probe_rt(struct rt2x00 case RT3572: case RT3593: case RT3883: @@ -264,8 +264,8 @@ case RT5390: case RT5392: case RT5592: ---- a/drivers/net/wireless/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/rt2x00/rt2x00.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h @@ -169,6 +169,7 @@ struct rt2x00_chip { #define RT3572 0x3572 #define RT3593 0x3593 diff --git a/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch b/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch index 13f2048e60..6094a613b2 100644 --- a/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch +++ b/package/kernel/mac80211/patches/619-rt2x00-change-led-polarity-from-OF.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -37,6 +37,7 @@ #include <linux/module.h> #include <linux/slab.h> @@ -8,7 +8,7 @@ #include "rt2x00.h" #include "rt2800lib.h" -@@ -7957,6 +7958,17 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7934,6 +7935,17 @@ static int rt2800_init_eeprom(struct rt2 rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); @@ -26,8 +26,8 @@ rt2x00dev->led_mcu_reg = eeprom; #endif /* CPTCFG_RT2X00_LIB_LEDS */ ---- a/drivers/net/wireless/rt2x00/rt2x00leds.c -+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c @@ -109,6 +109,9 @@ static int rt2x00leds_register_led(struc led->led_dev.name = name; led->led_dev.brightness = LED_OFF; diff --git a/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch b/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch index 2dbfd10f70..55452b9ebd 100644 --- a/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch +++ b/package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch @@ -1,6 +1,6 @@ ---- a/drivers/net/wireless/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c -@@ -1283,7 +1283,7 @@ static inline void rt2x00lib_set_if_comb +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +@@ -1284,7 +1284,7 @@ static inline void rt2x00lib_set_if_comb */ if_limit = &rt2x00dev->if_limits_ap; if_limit->max = rt2x00dev->ops->max_ap_intf; diff --git a/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch b/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch index aaa8367a6a..8ddf425850 100644 --- a/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch +++ b/package/kernel/mac80211/patches/620-rt2x00-rt3352-rf-id.patch @@ -1,6 +1,6 @@ ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -7841,10 +7841,11 @@ static int rt2800_init_eeprom(struct rt2 +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -7818,10 +7818,11 @@ static int rt2800_init_eeprom(struct rt2 * RT53xx: defined in "EEPROM_CHIP_ID" field */ if (rt2x00_rt(rt2x00dev, RT3290) || diff --git a/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch b/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch index bb2fc1ca95..e3e4c98efc 100644 --- a/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch +++ b/package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -2321,6 +2321,8 @@ struct mac_iveiv_entry { #define RFCSR30_RX_H20M FIELD8(0x04) #define RFCSR30_RX_VCM FIELD8(0x18) @@ -9,9 +9,9 @@ /* * RFCSR 31: ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c -@@ -3551,8 +3551,13 @@ static void rt2800_config_channel(struct +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +@@ -3528,8 +3528,13 @@ static void rt2800_config_channel(struct rt2x00_rf(rt2x00dev, RF5390) || rt2x00_rf(rt2x00dev, RF5392)) { rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); diff --git a/package/kernel/mac80211/patches/622-rt2x00-fix-beacon-bit-balance.patch b/package/kernel/mac80211/patches/622-rt2x00-fix-beacon-bit-balance.patch new file mode 100644 index 0000000000..3cf6268155 --- /dev/null +++ b/package/kernel/mac80211/patches/622-rt2x00-fix-beacon-bit-balance.patch @@ -0,0 +1,47 @@ +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c +@@ -627,12 +627,8 @@ void rt2x00mac_bss_info_changed(struct i + } else if (bss_conf->enable_beacon && !intf->enable_beacon) { + rt2x00dev->intf_beaconing++; + intf->enable_beacon = true; +- /* +- * Upload beacon to the H/W. This is only required on +- * USB devices. PCI devices fetch beacons periodically. +- */ +- if (rt2x00_is_usb(rt2x00dev)) +- rt2x00queue_update_beacon(rt2x00dev, vif); ++ ++ rt2x00queue_update_beacon(rt2x00dev, vif); + + if (rt2x00dev->intf_beaconing == 1) { + /* +--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +@@ -144,7 +144,8 @@ static void rt2x00lib_intf_scheduled_ite + + if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags)) { + mutex_lock(&intf->beacon_skb_mutex); +- rt2x00queue_update_beacon(rt2x00dev, vif); ++ if (intf->enable_beacon) ++ rt2x00queue_update_beacon(rt2x00dev, vif); + mutex_unlock(&intf->beacon_skb_mutex); + } + } +@@ -207,6 +208,7 @@ static void rt2x00lib_beaconupdate_iter( + struct ieee80211_vif *vif) + { + struct rt2x00_dev *rt2x00dev = data; ++ struct rt2x00_intf *intf = vif_to_intf(vif); + + if (vif->type != NL80211_IFTYPE_AP && + vif->type != NL80211_IFTYPE_ADHOC && +@@ -220,7 +222,8 @@ static void rt2x00lib_beaconupdate_iter( + * never be called for USB devices. + */ + WARN_ON(rt2x00_is_usb(rt2x00dev)); +- rt2x00queue_update_beacon(rt2x00dev, vif); ++ if (intf->enable_beacon) ++ rt2x00queue_update_beacon(rt2x00dev, vif); + } + + void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) diff --git a/package/kernel/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch b/package/kernel/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch index f2a766328e..a901a44ba4 100644 --- a/package/kernel/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch +++ b/package/kernel/mac80211/patches/700-mwl8k-missing-pci-id-for-WNR854T.patch @@ -1,6 +1,6 @@ ---- a/drivers/net/wireless/mwl8k.c -+++ b/drivers/net/wireless/mwl8k.c -@@ -5678,6 +5678,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw") +--- a/drivers/net/wireless/marvell/mwl8k.c ++++ b/drivers/net/wireless/marvell/mwl8k.c +@@ -5681,6 +5681,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw") MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API)); static const struct pci_device_id mwl8k_pci_id_table[] = { diff --git a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch index 9e29034e8c..fd885cc002 100644 --- a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch +++ b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/libertas/cfg.c -+++ b/drivers/net/wireless/libertas/cfg.c +--- a/drivers/net/wireless/marvell/libertas/cfg.c ++++ b/drivers/net/wireless/marvell/libertas/cfg.c @@ -2084,6 +2084,8 @@ struct wireless_dev *lbs_cfg_alloc(struc goto err_wiphy_new; } @@ -9,8 +9,8 @@ lbs_deb_leave(LBS_DEB_CFG80211); return wdev; ---- a/drivers/net/wireless/libertas/main.c -+++ b/drivers/net/wireless/libertas/main.c +--- a/drivers/net/wireless/marvell/libertas/main.c ++++ b/drivers/net/wireless/marvell/libertas/main.c @@ -987,6 +987,7 @@ struct lbs_private *lbs_add_card(void *c goto err_adapter; } diff --git a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch index 252fa810b0..b67a95f948 100644 --- a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch +++ b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/libertas/cfg.c -+++ b/drivers/net/wireless/libertas/cfg.c +--- a/drivers/net/wireless/marvell/libertas/cfg.c ++++ b/drivers/net/wireless/marvell/libertas/cfg.c @@ -2174,6 +2174,8 @@ int lbs_cfg_register(struct lbs_private wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); wdev->wiphy->reg_notifier = lbs_reg_notifier; diff --git a/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch b/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch new file mode 100644 index 0000000000..74cd4489f1 --- /dev/null +++ b/package/kernel/mac80211/patches/804-b43-sync-with-bcma.patch @@ -0,0 +1,17 @@ +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -1215,10 +1215,10 @@ void b43_wireless_core_phy_pll_reset(str + case B43_BUS_BCMA: + bcma_cc = &dev->dev->bdev->bus->drv_cc; + +- bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0); +- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4); +- bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4); +- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4); ++ bcma_cc_write32(bcma_cc, BCMA_CC_PMU_CHIPCTL_ADDR, 0); ++ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4); ++ bcma_cc_set32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, 0x4); ++ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4); + break; + #endif + #ifdef CPTCFG_B43_SSB diff --git a/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch b/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch index 95867ef8da..fd9e6fd974 100644 --- a/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch +++ b/package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/b43/b43.h -+++ b/drivers/net/wireless/b43/b43.h +--- a/drivers/net/wireless/broadcom/b43/b43.h ++++ b/drivers/net/wireless/broadcom/b43/b43.h @@ -839,6 +839,7 @@ struct b43_wldev { bool qos_enabled; /* TRUE, if QoS is used. */ bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ @@ -8,9 +8,9 @@ /* PHY/Radio device. */ struct b43_phy phy; ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c -@@ -76,6 +76,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw"); +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -75,6 +75,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw"); MODULE_FIRMWARE("b43/ucode5.fw"); MODULE_FIRMWARE("b43/ucode9.fw"); diff --git a/package/kernel/mac80211/patches/810-b43_no_pio.patch b/package/kernel/mac80211/patches/810-b43_no_pio.patch index 0979100d4c..79428c2784 100644 --- a/package/kernel/mac80211/patches/810-b43_no_pio.patch +++ b/package/kernel/mac80211/patches/810-b43_no_pio.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/b43/Makefile -+++ b/drivers/net/wireless/b43/Makefile +--- a/drivers/net/wireless/broadcom/b43/Makefile ++++ b/drivers/net/wireless/broadcom/b43/Makefile @@ -17,7 +17,7 @@ b43-$(CPTCFG_B43_PHY_AC) += phy_ac.o b43-y += sysfs.o b43-y += xmit.o @@ -9,8 +9,8 @@ b43-y += rfkill.o b43-y += ppr.o b43-$(CPTCFG_B43_LEDS) += leds.o ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c @@ -2008,10 +2008,12 @@ static void b43_do_interrupt_thread(stru dma_reason[0], dma_reason[1], dma_reason[2], dma_reason[3], @@ -24,8 +24,8 @@ b43_controller_restart(dev, "DMA error"); return; } ---- a/drivers/net/wireless/b43/pio.h -+++ b/drivers/net/wireless/b43/pio.h +--- a/drivers/net/wireless/broadcom/b43/pio.h ++++ b/drivers/net/wireless/broadcom/b43/pio.h @@ -150,7 +150,7 @@ static inline void b43_piorx_write32(str b43_write32(q->dev, q->mmio_base + offset, value); } @@ -73,9 +73,9 @@ +#endif /* CPTCFG_B43_PIO */ #endif /* B43_PIO_H_ */ ---- a/drivers/net/wireless/b43/Kconfig -+++ b/drivers/net/wireless/b43/Kconfig -@@ -118,7 +118,7 @@ config B43_BCMA_PIO +--- a/drivers/net/wireless/broadcom/b43/Kconfig ++++ b/drivers/net/wireless/broadcom/b43/Kconfig +@@ -98,7 +98,7 @@ config B43_BCMA_PIO default y config B43_PIO diff --git a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch index ac58dba19b..06c731fce6 100644 --- a/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch +++ b/package/kernel/mac80211/patches/820-b43-add-antenna-control.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c @@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st len, ram_offset, shm_size_offset, rate); @@ -9,7 +9,7 @@ antenna = b43_antenna_to_phyctl(antenna); ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); /* We can't send beacons with short preamble. Would get PHY errors. */ -@@ -3302,8 +3302,8 @@ static int b43_chip_init(struct b43_wlde +@@ -3300,8 +3300,8 @@ static int b43_chip_init(struct b43_wlde /* Select the antennae */ if (phy->ops->set_rx_antenna) @@ -20,7 +20,7 @@ if (phy->type == B43_PHYTYPE_B) { value16 = b43_read16(dev, 0x005E); -@@ -4003,7 +4003,6 @@ static int b43_op_config(struct ieee8021 +@@ -4001,7 +4001,6 @@ static int b43_op_config(struct ieee8021 struct b43_wldev *dev = wl->current_dev; struct b43_phy *phy = &dev->phy; struct ieee80211_conf *conf = &hw->conf; @@ -28,7 +28,7 @@ int err = 0; mutex_lock(&wl->mutex); -@@ -4046,11 +4045,9 @@ static int b43_op_config(struct ieee8021 +@@ -4044,11 +4043,9 @@ static int b43_op_config(struct ieee8021 } /* Antennas for RX and management frame TX. */ @@ -42,7 +42,7 @@ if (wl->radio_enabled != phy->radio_on) { if (wl->radio_enabled) { -@@ -5213,6 +5210,47 @@ static int b43_op_get_survey(struct ieee +@@ -5209,6 +5206,47 @@ static int b43_op_get_survey(struct ieee return 0; } @@ -90,7 +90,7 @@ static const struct ieee80211_ops b43_hw_ops = { .tx = b43_op_tx, .conf_tx = b43_op_conf_tx, -@@ -5234,6 +5272,8 @@ static const struct ieee80211_ops b43_hw +@@ -5230,6 +5268,8 @@ static const struct ieee80211_ops b43_hw .sw_scan_complete = b43_op_sw_scan_complete_notifier, .get_survey = b43_op_get_survey, .rfkill_poll = b43_rfkill_poll, @@ -99,7 +99,7 @@ }; /* Hard-reset the chip. Do not call this directly. -@@ -5542,6 +5582,8 @@ static int b43_one_core_attach(struct b4 +@@ -5538,6 +5578,8 @@ static int b43_one_core_attach(struct b4 if (!wldev) goto out; @@ -108,7 +108,7 @@ wldev->use_pio = b43_modparam_pio; wldev->dev = dev; wldev->wl = wl; -@@ -5632,6 +5674,9 @@ static struct b43_wl *b43_wireless_init( +@@ -5628,6 +5670,9 @@ static struct b43_wl *b43_wireless_init( hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; @@ -118,8 +118,8 @@ wl->hw_registred = false; hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); ---- a/drivers/net/wireless/b43/b43.h -+++ b/drivers/net/wireless/b43/b43.h +--- a/drivers/net/wireless/broadcom/b43/b43.h ++++ b/drivers/net/wireless/broadcom/b43/b43.h @@ -840,6 +840,8 @@ struct b43_wldev { bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ bool use_pio; /* TRUE if next init should use PIO */ diff --git a/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch b/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch index 9c51ac63d7..5899706896 100644 --- a/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch +++ b/package/kernel/mac80211/patches/841-b43-reduce-number-of-RX-slots.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/b43/dma.h -+++ b/drivers/net/wireless/b43/dma.h +--- a/drivers/net/wireless/broadcom/b43/dma.h ++++ b/drivers/net/wireless/broadcom/b43/dma.h @@ -169,7 +169,7 @@ struct b43_dmadesc_generic { /* DMA engine tuning knobs */ diff --git a/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch b/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch index d4f9a8892b..8d0c0412d2 100644 --- a/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch +++ b/package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c @@ -2899,6 +2899,14 @@ static int b43_gpio_init(struct b43_wlde } else if (dev->dev->chip_id == 0x5354) { /* Don't allow overtaking buttons GPIOs */ diff --git a/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch b/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch index 9d1d419460..ef7f3c92d2 100644 --- a/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch +++ b/package/kernel/mac80211/patches/847-b43-always-take-overlapping-devs.patch @@ -1,6 +1,6 @@ ---- a/drivers/net/wireless/b43/main.c -+++ b/drivers/net/wireless/b43/main.c -@@ -118,7 +118,7 @@ static int b43_modparam_pio = 0; +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -117,7 +117,7 @@ static int b43_modparam_pio = 0; module_param_named(pio, b43_modparam_pio, int, 0644); MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO"); diff --git a/package/kernel/mac80211/patches/850-brcmsmac-remove-extra-regulation-restriction.patch b/package/kernel/mac80211/patches/850-brcmsmac-remove-extra-regulation-restriction.patch index 185c4279e9..3c93386b30 100644 --- a/package/kernel/mac80211/patches/850-brcmsmac-remove-extra-regulation-restriction.patch +++ b/package/kernel/mac80211/patches/850-brcmsmac-remove-extra-regulation-restriction.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c +--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c @@ -58,19 +58,12 @@ (((c) < 149) ? 3 : 4)))) diff --git a/package/kernel/mac80211/patches/860-brcmfmac-use-bcm47xx-platform-NVRAM-as-fallback.patch b/package/kernel/mac80211/patches/860-brcmfmac-use-bcm47xx-platform-NVRAM-as-fallback.patch deleted file mode 100644 index 44bb779fd1..0000000000 --- a/package/kernel/mac80211/patches/860-brcmfmac-use-bcm47xx-platform-NVRAM-as-fallback.patch +++ /dev/null @@ -1,80 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Mon, 8 Jun 2015 16:59:31 +0200 -Subject: [PATCH] brcmfmac: use bcm47xx platform NVRAM as fallback -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> ---- - ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -19,6 +19,9 @@ - #include <linux/device.h> - #include <linux/firmware.h> - #include <linux/module.h> -+#if IS_ENABLED(CONFIG_BCM47XX_NVRAM) -+#include <linux/bcm47xx_nvram.h> -+#endif - - #include "debug.h" - #include "firmware.h" -@@ -424,17 +427,42 @@ struct brcmf_fw { - static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx) - { - struct brcmf_fw *fwctx = ctx; -+#if IS_ENABLED(CONFIG_BCM47XX_NVRAM) -+ const u8 *bcm47xx_nvram = NULL; -+ size_t bcm47xx_nvram_len; -+#endif -+ const u8 *data = NULL; -+ size_t data_len; - u32 nvram_length = 0; - void *nvram = NULL; - - brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(fwctx->dev)); -- if (!fw && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL)) -+ if (fw) { -+ data = fw->data; -+ data_len = fw->size; -+ } -+#if IS_ENABLED(CONFIG_BCM47XX_NVRAM) -+ else { -+ bcm47xx_nvram = bcm47xx_nvram_get_contents(&bcm47xx_nvram_len); -+ if (bcm47xx_nvram) { -+ data = bcm47xx_nvram; -+ data_len = bcm47xx_nvram_len; -+ brcmf_err("Found platform NVRAM (%zu B)\n", data_len); -+ } -+ } -+#endif -+ if (!data && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL)) - goto fail; - -- if (fw) { -- nvram = brcmf_fw_nvram_strip(fw->data, fw->size, &nvram_length, -+ if (data) { -+ nvram = brcmf_fw_nvram_strip(data, data_len, &nvram_length, - fwctx->domain_nr, fwctx->bus_nr); -- release_firmware(fw); -+ if (fw) -+ release_firmware(fw); -+#if IS_ENABLED(CONFIG_BCM47XX_NVRAM) -+ if (bcm47xx_nvram) -+ bcm47xx_nvram_release_contents(bcm47xx_nvram); -+#endif - if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL)) - goto fail; - } ---- a/drivers/net/wireless/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/brcm80211/brcmfmac/debug.h -@@ -19,6 +19,8 @@ - - #include <linux/net.h> /* net_ratelimit() */ - -+#include <linux/net.h> -+ - /* message levels */ - #define BRCMF_TRACE_VAL 0x00000002 - #define BRCMF_INFO_VAL 0x00000004 diff --git a/package/kernel/mac80211/patches/861-brcmfmac-register-wiphy-s-during-module_init.patch b/package/kernel/mac80211/patches/861-brcmfmac-register-wiphy-s-during-module_init.patch index 14f8a001af..95d93ae1f6 100644 --- a/package/kernel/mac80211/patches/861-brcmfmac-register-wiphy-s-during-module_init.patch +++ b/package/kernel/mac80211/patches/861-brcmfmac-register-wiphy-s-during-module_init.patch @@ -11,9 +11,9 @@ module loads successfully. Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> --- ---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c -@@ -1226,6 +1226,7 @@ static int __init brcmfmac_module_init(v +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +@@ -1332,6 +1332,7 @@ static int __init brcmfmac_module_init(v #endif if (!schedule_work(&brcmf_driver_work)) return -EBUSY; @@ -21,9 +21,9 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> return 0; } ---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c -@@ -422,13 +422,14 @@ struct brcmf_fw { +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +@@ -418,6 +418,7 @@ struct brcmf_fw { u16 bus_nr; void (*done)(struct device *dev, const struct firmware *fw, void *nvram_image, u32 nvram_len); @@ -31,16 +31,8 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> }; static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx) - { - struct brcmf_fw *fwctx = ctx; - #if IS_ENABLED(CONFIG_BCM47XX_NVRAM) -- const u8 *bcm47xx_nvram = NULL; -+ u8 *bcm47xx_nvram = NULL; - size_t bcm47xx_nvram_len; - #endif - const u8 *data = NULL; -@@ -468,6 +469,8 @@ static void brcmf_fw_request_nvram_done( - } +@@ -452,6 +453,8 @@ static void brcmf_fw_request_nvram_done( + goto fail; fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length); + if (fwctx->completion) @@ -48,7 +40,7 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> kfree(fwctx); return; -@@ -475,6 +478,8 @@ fail: +@@ -459,6 +462,8 @@ fail: brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev)); release_firmware(fwctx->code); device_release_driver(fwctx->dev); @@ -57,7 +49,7 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> kfree(fwctx); } -@@ -490,6 +495,8 @@ static void brcmf_fw_request_code_done(c +@@ -474,6 +479,8 @@ static void brcmf_fw_request_code_done(c /* only requested code so done here */ if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) { fwctx->done(fwctx->dev, fw, NULL, 0); @@ -66,16 +58,7 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> kfree(fwctx); return; } -@@ -504,6 +511,8 @@ static void brcmf_fw_request_code_done(c - /* when nvram is optional call .done() callback here */ - if (fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL) { - fwctx->done(fwctx->dev, fw, NULL, 0); -+ if (fwctx->completion) -+ complete(fwctx->completion); - kfree(fwctx); - return; - } -@@ -513,6 +522,8 @@ static void brcmf_fw_request_code_done(c +@@ -491,6 +498,8 @@ static void brcmf_fw_request_code_done(c fail: brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev)); device_release_driver(fwctx->dev); @@ -84,7 +67,7 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> kfree(fwctx); } -@@ -524,6 +535,8 @@ int brcmf_fw_get_firmwares_pcie(struct d +@@ -502,6 +511,8 @@ int brcmf_fw_get_firmwares_pcie(struct d u16 domain_nr, u16 bus_nr) { struct brcmf_fw *fwctx; @@ -93,7 +76,7 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev)); if (!fw_cb || !code) -@@ -544,9 +557,17 @@ int brcmf_fw_get_firmwares_pcie(struct d +@@ -522,9 +533,17 @@ int brcmf_fw_get_firmwares_pcie(struct d fwctx->domain_nr = domain_nr; fwctx->bus_nr = bus_nr; diff --git a/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch b/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch index 32c4a6f9e7..4295b4bd33 100644 --- a/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch +++ b/package/kernel/mac80211/patches/862-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch @@ -8,9 +8,9 @@ Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> --- ---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c -@@ -608,9 +608,37 @@ static struct wireless_dev *brcmf_cfg802 +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -615,9 +615,37 @@ static struct wireless_dev *brcmf_cfg802 u32 *flags, struct vif_params *params) { diff --git a/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch b/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch deleted file mode 100644 index 856dea8de4..0000000000 --- a/package/kernel/mac80211/patches/900-wlcore-Add-support-for-DT-platform-data.patch +++ /dev/null @@ -1,139 +0,0 @@ -When running with DT, we no longer have a board file that can set up the -platform data for wlcore. Allow this data to be passed from DT. - -Since some platforms use a gpio-irq, add support for passing either the -irq number or the gpio number. For the latter case, the driver will -request the gpio and convert it to the irq number. If an irq is -specified, it'll be used as is. - -[Arik - the pdev_data pointer does not belong to us and is freed when -the device is released. Dereference to our private data first.] - -Signed-off-by: Ido Yariv <ido@wizery.com> -Signed-off-by: Arik Nemtsov <arik@wizery.com> ---- - drivers/net/wireless/ti/wlcore/sdio.c | 71 ++++++++++++++++++++++++++++++++--- - include/linux/wl12xx.h | 3 +- - 2 files changed, 67 insertions(+), 7 deletions(-) - ---- a/drivers/net/wireless/ti/wlcore/sdio.c -+++ b/drivers/net/wireless/ti/wlcore/sdio.c -@@ -34,6 +34,7 @@ - #include <linux/wl12xx.h> - #include <linux/pm_runtime.h> - #include <linux/printk.h> -+#include <linux/of.h> - - #include "wlcore.h" - #include "wl12xx_80211.h" -@@ -214,6 +215,61 @@ static struct wl1271_if_operations sdio_ - .set_block_size = wl1271_sdio_set_block_size, - }; - -+static const struct of_device_id wlcore_of_match[] = { -+ { -+ .compatible = "wlcore", -+ }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, wlcore_of_match); -+ -+static struct wl12xx_platform_data *get_platform_data(struct device *dev) -+{ -+ struct wl12xx_platform_data *pdata; -+ struct device_node *np; -+ u32 gpio; -+ -+ pdata = wl12xx_get_platform_data(); -+ if (!IS_ERR(pdata)) -+ return kmemdup(pdata, sizeof(*pdata), GFP_KERNEL); -+ -+ np = of_find_matching_node(NULL, wlcore_of_match); -+ if (!np) { -+ dev_err(dev, "No platform data set\n"); -+ return NULL; -+ } -+ -+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); -+ if (!pdata) { -+ dev_err(dev, "Can't allocate platform data\n"); -+ return NULL; -+ } -+ -+ if (of_property_read_u32(np, "irq", &pdata->irq)) { -+ if (!of_property_read_u32(np, "gpio", &gpio) && -+ !gpio_request_one(gpio, GPIOF_IN, "wlcore_irq")) { -+ pdata->gpio = gpio; -+ pdata->irq = gpio_to_irq(gpio); -+ } -+ } -+ -+ /* Optional fields */ -+ pdata->use_eeprom = of_property_read_bool(np, "use-eeprom"); -+ of_property_read_u32(np, "board-ref-clock", &pdata->board_ref_clock); -+ of_property_read_u32(np, "board-tcxo-clock", &pdata->board_tcxo_clock); -+ of_property_read_u32(np, "platform-quirks", &pdata->platform_quirks); -+ -+ return pdata; -+} -+ -+static void del_platform_data(struct wl12xx_platform_data *pdata) -+{ -+ if (pdata->gpio) -+ gpio_free(pdata->gpio); -+ -+ kfree(pdata); -+} -+ - static int wl1271_probe(struct sdio_func *func, - const struct sdio_device_id *id) - { -@@ -245,10 +301,10 @@ static int wl1271_probe(struct sdio_func - /* Use block mode for transferring over one block size of data */ - func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; - -- pdev_data.pdata = wl12xx_get_platform_data(); -- if (IS_ERR(pdev_data.pdata)) { -- ret = PTR_ERR(pdev_data.pdata); -- dev_err(glue->dev, "missing wlan platform data: %d\n", ret); -+ pdev_data.pdata = get_platform_data(&func->dev); -+ if (!pdev_data.pdata) { -+ ret = -EINVAL; -+ dev_err(glue->dev, "missing wlan platform data\n"); - goto out_free_glue; - } - -@@ -279,7 +335,7 @@ static int wl1271_probe(struct sdio_func - if (!glue->core) { - dev_err(glue->dev, "can't allocate platform_device"); - ret = -ENOMEM; -- goto out_free_glue; -+ goto out_free_pdata; - } - - glue->core->dev.parent = &func->dev; -@@ -313,6 +369,9 @@ static int wl1271_probe(struct sdio_func - out_dev_put: - platform_device_put(glue->core); - -+out_free_pdata: -+ del_platform_data(pdev_data->pdata); -+ - out_free_glue: - kfree(glue); - -@@ -323,11 +382,14 @@ out: - static void wl1271_remove(struct sdio_func *func) - { - struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); -+ struct wlcore_platdev_data *pdev_data = glue->core->dev.platform_data; -+ struct wl12xx_platform_data *pdata = pdev_data->pdata; - - /* Undo decrement done above in wl1271_probe */ - pm_runtime_get_noresume(&func->dev); - - platform_device_unregister(glue->core); -+ del_platform_data(pdata); - kfree(glue); - } - diff --git a/package/kernel/mac80211/patches/910-00-rt2x00-enable-rt2800soc-for-mt7620.patch b/package/kernel/mac80211/patches/910-00-rt2x00-enable-rt2800soc-for-mt7620.patch index e6b2d7be0d..bc9f799520 100644 --- a/package/kernel/mac80211/patches/910-00-rt2x00-enable-rt2800soc-for-mt7620.patch +++ b/package/kernel/mac80211/patches/910-00-rt2x00-enable-rt2800soc-for-mt7620.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/Kconfig -+++ b/drivers/net/wireless/rt2x00/Kconfig +--- a/drivers/net/wireless/ralink/rt2x00/Kconfig ++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig @@ -211,7 +211,7 @@ endif config RT2800SOC tristate "Ralink WiSoC support" diff --git a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch index 501910fe82..f2e21ea49f 100644 --- a/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch +++ b/package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch @@ -1,5 +1,5 @@ ---- a/drivers/net/wireless/rt2x00/rt2800.h -+++ b/drivers/net/wireless/rt2x00/rt2800.h +--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h @@ -81,6 +81,7 @@ #define RF5372 0x5372 #define RF5390 0x5390 @@ -62,8 +62,8 @@ /* TX_PWR_CFG_7 */ #define TX_PWR_CFG_7 0x13d4 #define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f) ---- a/drivers/net/wireless/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/rt2x00/rt2800lib.c +--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c ++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -61,6 +61,8 @@ rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) #define WAIT_FOR_RFCSR(__dev, __reg) \ @@ -91,7 +91,8 @@ + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 1); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1); -+ + +- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + } + break; @@ -103,8 +104,7 @@ + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - -- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); ++ + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + } + break; @@ -210,7 +210,7 @@ case RT5592: *txwi_size = TXWI_DESC_SIZE_5WORDS; *rxwi_size = RXWI_DESC_SIZE_6WORDS; -@@ -3326,6 +3399,312 @@ static void rt2800_config_channel_rf55xx +@@ -3303,6 +3376,312 @@ static void rt2800_config_channel_rf55xx rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F); } @@ -258,6 +258,7 @@ + u32 mac_sys_ctrl, mac_status; + u32 tx_pin = 0x00150F0F; + struct hw_mode_spec *spec = &rt2x00dev->spec; ++ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + + /* Frequeny plan setting */ + /* @@ -383,7 +384,6 @@ + rfcsr &= (~0x4); + rt2800_rfcsr_write(rt2x00dev, 28, rfcsr); + -+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; + /*if (bScan == FALSE)*/ + if (conf_is_ht40(conf)) { + txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40, @@ -523,7 +523,7 @@ static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) -@@ -3482,7 +3861,7 @@ static void rt2800_config_channel(struct +@@ -3459,7 +3838,7 @@ static void rt2800_config_channel(struct struct channel_info *info) { u32 reg; @@ -532,7 +532,7 @@ u8 bbp, rfcsr; info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel, -@@ -3536,6 +3915,9 @@ static void rt2800_config_channel(struct +@@ -3513,6 +3892,9 @@ static void rt2800_config_channel(struct case RF5592: rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info); break; @@ -542,7 +542,7 @@ default: rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); } -@@ -3638,7 +4020,7 @@ static void rt2800_config_channel(struct +@@ -3615,7 +3997,7 @@ static void rt2800_config_channel(struct else if (rt2x00_rt(rt2x00dev, RT3593) || rt2x00_rt(rt2x00dev, RT3883)) rt2800_bbp_write(rt2x00dev, 82, 0x82); @@ -551,7 +551,7 @@ rt2800_bbp_write(rt2x00dev, 82, 0xf2); if (rt2x00_rt(rt2x00dev, RT3593) || -@@ -3660,7 +4042,7 @@ static void rt2800_config_channel(struct +@@ -3637,7 +4019,7 @@ static void rt2800_config_channel(struct if (rt2x00_rt(rt2x00dev, RT3572)) rt2800_rfcsr_write(rt2x00dev, 8, 0); @@ -560,7 +560,7 @@ switch (rt2x00dev->default_ant.tx_chain_num) { case 3: -@@ -3709,6 +4091,7 @@ static void rt2800_config_channel(struct +@@ -3686,6 +4068,7 @@ static void rt2800_config_channel(struct rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); @@ -568,7 +568,7 @@ rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); -@@ -4725,6 +5108,14 @@ void rt2800_vco_calibration(struct rt2x0 +@@ -4702,6 +5085,14 @@ void rt2800_vco_calibration(struct rt2x0 rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); break; @@ -583,7 +583,7 @@ default: return; } -@@ -5125,9 +5516,42 @@ static int rt2800_init_registers(struct +@@ -5102,9 +5493,42 @@ static int rt2800_init_registers(struct } else if (rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392) || rt2x00_rt(rt2x00dev, RT5592)) { @@ -629,7 +629,7 @@ } else if (rt2x00_rt(rt2x00dev, RT5350)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); } else { -@@ -6159,6 +6583,225 @@ static void rt2800_init_bbp_5592(struct +@@ -6136,6 +6560,225 @@ static void rt2800_init_bbp_5592(struct rt2800_bbp_write(rt2x00dev, 103, 0xc0); } @@ -855,7 +855,7 @@ static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) { unsigned int i; -@@ -6201,7 +6844,10 @@ static void rt2800_init_bbp(struct rt2x0 +@@ -6178,7 +6821,10 @@ static void rt2800_init_bbp(struct rt2x0 return; case RT5390: case RT5392: @@ -867,7 +867,7 @@ break; case RT5592: rt2800_init_bbp_5592(rt2x00dev); -@@ -7415,6 +8061,295 @@ static void rt2800_init_rfcsr_5592(struc +@@ -7392,6 +8038,296 @@ static void rt2800_init_rfcsr_5592(struc rt2800_led_open_drain_enable(rt2x00dev); } @@ -875,6 +875,8 @@ +{ + u16 freq; + u8 rfvalue; ++ struct hw_mode_spec *spec = &rt2x00dev->spec; ++ + /* Initialize RF central register to default value */ + rt2800_rfcsr_write(rt2x00dev, 0, 0x02); + rt2800_rfcsr_write(rt2x00dev, 1, 0x03); @@ -921,7 +923,6 @@ + rt2800_rfcsr_write(rt2x00dev, 42, 0x5B); + rt2800_rfcsr_write(rt2x00dev, 43, 0x00); + -+ struct hw_mode_spec *spec = &rt2x00dev->spec; + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + if (spec->clk_is_20mhz) + rt2800_rfcsr_write(rt2x00dev, 13, 0x03); @@ -1163,7 +1164,7 @@ static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) { if (rt2800_is_305x_soc(rt2x00dev)) { -@@ -7450,7 +8385,10 @@ static void rt2800_init_rfcsr(struct rt2 +@@ -7427,7 +8363,10 @@ static void rt2800_init_rfcsr(struct rt2 rt2800_init_rfcsr_5350(rt2x00dev); break; case RT5390: @@ -1175,7 +1176,7 @@ break; case RT5392: rt2800_init_rfcsr_5392(rt2x00dev); -@@ -7882,6 +8820,7 @@ static int rt2800_init_eeprom(struct rt2 +@@ -7859,6 +8798,7 @@ static int rt2800_init_eeprom(struct rt2 case RF5390: case RF5392: case RF5592: @@ -1183,7 +1184,7 @@ break; default: rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n", -@@ -8448,6 +9387,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8423,6 +9363,7 @@ static int rt2800_probe_hw_mode(struct r case RF5372: case RF5390: case RF5392: @@ -1191,7 +1192,7 @@ spec->num_channels = 14; if (spec->clk_is_20mhz) spec->channels = rf_vals_xtal20mhz_3x; -@@ -8588,6 +9528,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -8563,6 +9504,7 @@ static int rt2800_probe_hw_mode(struct r case RF5372: case RF5390: case RF5392: diff --git a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch b/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch deleted file mode 100644 index 4c04d4f0ac..0000000000 --- a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/wireless/ath/ath10k/core.c -+++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -387,9 +387,14 @@ static int ath10k_download_and_run_otp(s - - ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result); - -- if (!skip_otp && result != 0) { -- ath10k_err(ar, "otp calibration failed: %d", result); -- return -EINVAL; -+ if (!skip_otp) { -+ if (result == 2) { -+ ath10k_warn(ar, "otp stream is empty, using board.bin contents"); -+ return 0; -+ } else if (result != 0) { -+ ath10k_err(ar, "otp calibration failed: %d", result); -+ return -EINVAL; -+ } - } - - return 0; diff --git a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch index eed3814eeb..8c6d720a73 100644 --- a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch +++ b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch @@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com> --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -1323,6 +1323,16 @@ int ath10k_core_register(struct ath10k * +@@ -1914,6 +1914,16 @@ int ath10k_core_register(struct ath10k * ar->chip_id = chip_id; queue_work(ar->workqueue, &ar->register_work); diff --git a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch index 8003f86468..281b4475ad 100644 --- a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch +++ b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c -@@ -5416,6 +5416,21 @@ struct ath10k_vif *ath10k_get_arvif(stru +@@ -7141,6 +7141,21 @@ struct ath10k_vif *ath10k_get_arvif(stru return arvif_iter.arvif; } @@ -22,7 +22,7 @@ int ath10k_mac_register(struct ath10k *ar) { static const u32 cipher_suites[] = { -@@ -5590,6 +5605,12 @@ int ath10k_mac_register(struct ath10k *a +@@ -7357,6 +7372,12 @@ int ath10k_mac_register(struct ath10k *a ar->hw->wiphy->cipher_suites = cipher_suites; ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); diff --git a/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch new file mode 100644 index 0000000000..357faee4bf --- /dev/null +++ b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch @@ -0,0 +1,20 @@ +--- a/drivers/net/wireless/marvell/mwl8k.c ++++ b/drivers/net/wireless/marvell/mwl8k.c +@@ -6264,6 +6264,8 @@ static int mwl8k_probe(struct pci_dev *p + + priv->running_bsses = 0; + ++ wait_for_completion(&priv->firmware_loading_complete); ++ + return rc; + + err_stop_firmware: +@@ -6297,8 +6299,6 @@ static void mwl8k_remove(struct pci_dev + return; + priv = hw->priv; + +- wait_for_completion(&priv->firmware_loading_complete); +- + if (priv->fw_state == FW_STATE_ERROR) { + mwl8k_hw_reset(priv); + goto unmap; diff --git a/package/kernel/mt76/Makefile b/package/kernel/mt76/Makefile index 5ede95a44e..0f2a501cf3 100644 --- a/package/kernel/mt76/Makefile +++ b/package/kernel/mt76/Makefile @@ -1,7 +1,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=mt76 -PKG_VERSION:=2015-10-12 +PKG_VERSION:=2016-02-28 PKG_RELEASE=1 PKG_LICENSE:=GPLv2 @@ -10,7 +10,7 @@ PKG_LICENSE_FILES:= PKG_SOURCE_URL:=https://github.com/openwrt/mt76 PKG_SOURCE_PROTO:=git PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE_VERSION:=2f31d1e329dc43074a05782624195860c45b099a +PKG_SOURCE_VERSION:=675868d4e84f0f4be2449c40902b229b79ecf926 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org> @@ -23,8 +23,10 @@ define KernelPackage/mt76 SUBMENU:=Wireless Drivers TITLE:=MediaTek MT76x2 wireless driver DEPENDS:=+kmod-mac80211 +@DRIVER_11N_SUPPORT @PCI_SUPPORT - FILES:=$(PKG_BUILD_DIR)/mt76pci.ko - AUTOLOAD:=$(call AutoLoad,50,mac80211 mt76pci) + FILES:=\ + $(PKG_BUILD_DIR)/mt76.ko \ + $(PKG_BUILD_DIR)/mt76x2e.ko + AUTOLOAD:=$(call AutoLoad,50,mac80211 mt76 mt76x2e) endef NOSTDINC_FLAGS = \ diff --git a/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch b/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch deleted file mode 100644 index e94574dc43..0000000000 --- a/package/kernel/mt76/patches/001-backport_ieee80211_hw_set.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/init.c -+++ b/init.c -@@ -16,6 +16,9 @@ - #include "eeprom.h" - #include "mcu.h" - -+#define ieee80211_hw_set(hw, flag) \ -+ do { (hw)->flags |= IEEE80211_HW_##flag; } while(0) -+ - static bool - mt76_wait_for_mac(struct mt76_dev *dev) - { diff --git a/package/kernel/mt76/patches/002-disable_fast_xmit.patch b/package/kernel/mt76/patches/002-disable_fast_xmit.patch deleted file mode 100644 index f7a011b2e1..0000000000 --- a/package/kernel/mt76/patches/002-disable_fast_xmit.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/init.c -+++ b/init.c -@@ -816,7 +816,6 @@ int mt76_register_device(struct mt76_dev - ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING); - ieee80211_hw_set(hw, AMPDU_AGGREGATION); - ieee80211_hw_set(hw, SUPPORTS_RC_TABLE); -- ieee80211_hw_set(hw, SUPPORT_FAST_XMIT); - - hw->sta_data_size = sizeof(struct mt76_sta); - hw->vif_data_size = sizeof(struct mt76_vif); diff --git a/package/kernel/mwlwifi/patches/100-drop_old_api.patch b/package/kernel/mwlwifi/patches/100-drop_old_api.patch new file mode 100644 index 0000000000..d2e149e9a2 --- /dev/null +++ b/package/kernel/mwlwifi/patches/100-drop_old_api.patch @@ -0,0 +1,92 @@ +--- a/main.c ++++ b/main.c +@@ -418,11 +418,7 @@ static void mwl_set_ht_caps(struct mwl_p + band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; + band->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; + +-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0) +- hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; +-#else + ieee80211_hw_set(hw, AMPDU_AGGREGATION); +-#endif + band->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; + band->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_4; + +@@ -524,29 +520,16 @@ static int mwl_wl_init(struct mwl_priv * + hw->queues = SYSADPT_TX_WMM_QUEUES; + + /* Set rssi values to dBm */ +-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0) +- hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_HAS_RATE_CONTROL; +-#else + ieee80211_hw_set(hw, SIGNAL_DBM); + ieee80211_hw_set(hw, HAS_RATE_CONTROL); +-#endif + + /* Ask mac80211 not to trigger PS mode + * based on PM bit of incoming frames. + */ +-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0) +- hw->flags |= IEEE80211_HW_AP_LINK_PS; +-#else + ieee80211_hw_set(hw, AP_LINK_PS); +-#endif + +-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 2, 0) +- hw->flags |= IEEE80211_HW_SUPPORTS_PER_STA_GTK | +- IEEE80211_HW_MFP_CAPABLE; +-#else + ieee80211_hw_set(hw, SUPPORTS_PER_STA_GTK); + ieee80211_hw_set(hw, MFP_CAPABLE); +-#endif + + hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + +--- a/dev.h ++++ b/dev.h +@@ -484,10 +484,6 @@ static inline struct mwl_sta *mwl_dev_ge + return (struct mwl_sta *)&sta->drv_priv; + } + +-#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0) +-#define ether_addr_copy(dst, src) memcpy(dst, src, ETH_ALEN) +-#endif +- + /* Defined in mac80211.c. */ + extern const struct ieee80211_ops mwl_mac80211_ops; + +--- a/mac80211.c ++++ b/mac80211.c +@@ -572,19 +572,11 @@ static int mwl_mac80211_get_survey(struc + return 0; + } + +-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0) +-static int mwl_mac80211_ampdu_action(struct ieee80211_hw *hw, +- struct ieee80211_vif *vif, +- enum ieee80211_ampdu_mlme_action action, +- struct ieee80211_sta *sta, +- u16 tid, u16 *ssn, u8 buf_size) +-#else + static int mwl_mac80211_ampdu_action(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, + u16 tid, u16 *ssn, u8 buf_size, bool amsdu) +-#endif + { + int rc = 0; + struct mwl_priv *priv = hw->priv; +--- a/rx.c ++++ b/rx.c +@@ -232,10 +232,8 @@ static inline void mwl_rx_prepare_status + status->flag |= RX_FLAG_VHT; + if (bw == RX_RATE_INFO_HT40) + status->flag |= RX_FLAG_40MHZ; +-#if LINUX_VERSION_CODE > KERNEL_VERSION(3, 18, 0) + if (bw == RX_RATE_INFO_HT80) + status->vht_flag |= RX_VHT_FLAG_80MHZ; +-#endif + if (gi == RX_RATE_INFO_SHORT_INTERVAL) + status->flag |= RX_FLAG_SHORT_GI; + status->vht_nss = (nss + 1); diff --git a/package/kernel/mwlwifi/patches/110-api_sync.patch b/package/kernel/mwlwifi/patches/110-api_sync.patch new file mode 100644 index 0000000000..ed3e06a1c1 --- /dev/null +++ b/package/kernel/mwlwifi/patches/110-api_sync.patch @@ -0,0 +1,19 @@ +--- a/mac80211.c ++++ b/mac80211.c +@@ -597,10 +597,13 @@ static int mwl_mac80211_get_survey(struc + + static int mwl_mac80211_ampdu_action(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, +- enum ieee80211_ampdu_mlme_action action, +- struct ieee80211_sta *sta, +- u16 tid, u16 *ssn, u8 buf_size, bool amsdu) ++ struct ieee80211_ampdu_params *params) + { ++ enum ieee80211_ampdu_mlme_action action = params->action; ++ struct ieee80211_sta *sta = params->sta; ++ u16 tid = params->tid; ++ u16 *ssn = ¶ms->ssn; ++ u8 buf_size = params->buf_size; + int rc = 0; + struct mwl_priv *priv = hw->priv; + struct mwl_ampdu_stream *stream; diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h index 9fa70167e6..30ce2165cb 100644 --- a/target/linux/generic/files/include/linux/ath9k_platform.h +++ b/target/linux/generic/files/include/linux/ath9k_platform.h @@ -36,6 +36,7 @@ struct ath9k_platform_data { bool tx_gain_buffalo; bool disable_2ghz; bool disable_5ghz; + bool led_active_high; int (*get_mac_revision)(void); int (*external_reset)(void); diff --git a/target/linux/generic/patches-3.18/032-bcma-from-4.6.patch b/target/linux/generic/patches-3.18/032-bcma-from-4.6.patch index 8ec73d92ce..a74d9eead9 100644 --- a/target/linux/generic/patches-3.18/032-bcma-from-4.6.patch +++ b/target/linux/generic/patches-3.18/032-bcma-from-4.6.patch @@ -1,6 +1,40 @@ --- a/drivers/bcma/driver_chipcommon.c +++ b/drivers/bcma/driver_chipcommon.c -@@ -190,6 +190,7 @@ u32 bcma_chipco_watchdog_timer_set(struc +@@ -15,6 +15,8 @@ + #include <linux/platform_device.h> + #include <linux/bcma/bcma.h> + ++static void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++ + static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, + u32 mask, u32 value) + { +@@ -115,6 +117,8 @@ int bcma_chipco_watchdog_register(struct + + void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc) + { ++ struct bcma_bus *bus = cc->core->bus; ++ + if (cc->early_setup_done) + return; + +@@ -129,6 +133,9 @@ void bcma_core_chipcommon_early_init(str + if (cc->capabilities & BCMA_CC_CAP_PMU) + bcma_pmu_early_init(cc); + ++ if (IS_BUILTIN(CONFIG_BCM47XX) && bus->hosttype == BCMA_HOSTTYPE_SOC) ++ bcma_chipco_serial_init(cc); ++ + cc->early_setup_done = true; + } + +@@ -185,11 +192,12 @@ u32 bcma_chipco_watchdog_timer_set(struc + ticks = 2; + else if (ticks > maxt) + ticks = maxt; +- bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks); + } else { struct bcma_bus *bus = cc->core->bus; if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4707 && @@ -8,6 +42,232 @@ bus->chipinfo.id != BCMA_CHIP_ID_BCM53018) bcma_core_set_clockmode(cc->core, ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC); +@@ -314,9 +322,9 @@ u32 bcma_chipco_gpio_pulldown(struct bcm + return res; + } + +-#ifdef CONFIG_BCMA_DRIVER_MIPS +-void bcma_chipco_serial_init(struct bcma_drv_cc *cc) ++static void bcma_chipco_serial_init(struct bcma_drv_cc *cc) + { ++#if IS_BUILTIN(CONFIG_BCM47XX) + unsigned int irq; + u32 baud_base; + u32 i; +@@ -358,5 +366,5 @@ void bcma_chipco_serial_init(struct bcma + ports[i].baud_base = baud_base; + ports[i].reg_shift = 0; + } ++#endif /* CONFIG_BCM47XX */ + } +-#endif /* CONFIG_BCMA_DRIVER_MIPS */ +--- a/drivers/bcma/driver_chipcommon_pmu.c ++++ b/drivers/bcma/driver_chipcommon_pmu.c +@@ -15,44 +15,44 @@ + + u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) + { +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); +- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); +- return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset); ++ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR); ++ return bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA); + } + EXPORT_SYMBOL_GPL(bcma_chipco_pll_read); + + void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) + { +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); +- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset); ++ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value); + } + EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); + + void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, + u32 set) + { +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); +- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); +- bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset); ++ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR); ++ bcma_pmu_maskset32(cc, BCMA_CC_PMU_PLLCTL_DATA, mask, set); + } + EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); + + void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set) + { +- bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); +- bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); +- bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_CHIPCTL_ADDR, offset); ++ bcma_pmu_read32(cc, BCMA_CC_PMU_CHIPCTL_ADDR); ++ bcma_pmu_maskset32(cc, BCMA_CC_PMU_CHIPCTL_DATA, mask, set); + } + EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); + + void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, + u32 set) + { +- bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); +- bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); +- bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_REGCTL_ADDR, offset); ++ bcma_pmu_read32(cc, BCMA_CC_PMU_REGCTL_ADDR); ++ bcma_pmu_maskset32(cc, BCMA_CC_PMU_REGCTL_DATA, mask, set); + } + EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +@@ -60,18 +60,18 @@ static u32 bcma_pmu_xtalfreq(struct bcma + { + u32 ilp_ctl, alp_hz; + +- if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) & ++ if (!(bcma_pmu_read32(cc, BCMA_CC_PMU_STAT) & + BCMA_CC_PMU_STAT_EXT_LPO_AVAIL)) + return 0; + +- bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, +- BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT)); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ, ++ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT)); + usleep_range(1000, 2000); + +- ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ); ++ ilp_ctl = bcma_pmu_read32(cc, BCMA_CC_PMU_XTAL_FREQ); + ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK; + +- bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0); + + alp_hz = ilp_ctl * 32768 / 4; + return (alp_hz + 50000) / 100000 * 100; +@@ -127,8 +127,8 @@ static void bcma_pmu2_pll_init0(struct b + mask = (u32)~(BCMA_RES_4314_HT_AVAIL | + BCMA_RES_4314_MACPHY_CLK_AVAIL); + +- bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask); +- bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask); ++ bcma_pmu_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask); ++ bcma_pmu_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask); + bcma_wait_value(cc->core, BCMA_CLKCTLST, + BCMA_CLKCTLST_HAVEHT, 0, 20000); + break; +@@ -140,7 +140,7 @@ static void bcma_pmu2_pll_init0(struct b + + /* Flush */ + if (cc->pmu.rev >= 2) +- bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); ++ bcma_pmu_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); + + /* TODO: Do we need to update OTP? */ + } +@@ -195,9 +195,9 @@ static void bcma_pmu_resources_init(stru + + /* Set the resource masks. */ + if (min_msk) +- bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); + if (max_msk) +- bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); + + /* + * Add some delay; allow resources to come up and settle. +@@ -269,23 +269,33 @@ static void bcma_pmu_workarounds(struct + + void bcma_pmu_early_init(struct bcma_drv_cc *cc) + { ++ struct bcma_bus *bus = cc->core->bus; + u32 pmucap; + +- pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP); ++ if (cc->core->id.rev >= 35 && ++ cc->capabilities_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) { ++ cc->pmu.core = bcma_find_core(bus, BCMA_CORE_PMU); ++ if (!cc->pmu.core) ++ bcma_warn(bus, "Couldn't find expected PMU core"); ++ } ++ if (!cc->pmu.core) ++ cc->pmu.core = cc->core; ++ ++ pmucap = bcma_pmu_read32(cc, BCMA_CC_PMU_CAP); + cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION); + +- bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n", +- cc->pmu.rev, pmucap); ++ bcma_debug(bus, "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, ++ pmucap); + } + + void bcma_pmu_init(struct bcma_drv_cc *cc) + { + if (cc->pmu.rev == 1) +- bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, +- ~BCMA_CC_PMU_CTL_NOILPONW); ++ bcma_pmu_mask32(cc, BCMA_CC_PMU_CTL, ++ ~BCMA_CC_PMU_CTL_NOILPONW); + else +- bcma_cc_set32(cc, BCMA_CC_PMU_CTL, +- BCMA_CC_PMU_CTL_NOILPONW); ++ bcma_pmu_set32(cc, BCMA_CC_PMU_CTL, ++ BCMA_CC_PMU_CTL_NOILPONW); + + bcma_pmu_pll_init(cc); + bcma_pmu_resources_init(cc); +@@ -472,8 +482,8 @@ u32 bcma_pmu_get_cpu_clock(struct bcma_d + static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset, + u32 value) + { +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value); + } + + void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid) +@@ -497,20 +507,20 @@ void bcma_pmu_spuravoid_pllupdate(struct + bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0; + + /* RMW only the P1 divider */ +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, + BCMA_CC_PMU_PLL_CTL0 + phypll_offset); +- tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++ tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA); + tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK)); + tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT); +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp); + + /* RMW only the int feedback divider */ +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, + BCMA_CC_PMU_PLL_CTL2 + phypll_offset); +- tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); ++ tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA); + tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK); + tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT; +- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp); + + tmp = BCMA_CC_PMU_CTL_PLL_UPD; + break; +@@ -646,7 +656,7 @@ void bcma_pmu_spuravoid_pllupdate(struct + break; + } + +- tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL); +- bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp); ++ tmp |= bcma_pmu_read32(cc, BCMA_CC_PMU_CTL); ++ bcma_pmu_write32(cc, BCMA_CC_PMU_CTL, tmp); + } + EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate); --- a/drivers/bcma/driver_chipcommon_sflash.c +++ b/drivers/bcma/driver_chipcommon_sflash.c @@ -38,6 +38,7 @@ static const struct bcma_sflash_tbl_e bc @@ -18,27 +278,6 @@ { NULL }, }; ---- a/drivers/bcma/driver_gpio.c -+++ b/drivers/bcma/driver_gpio.c -@@ -229,6 +229,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c - case BCMA_CHIP_ID_BCM4707: - case BCMA_CHIP_ID_BCM5357: - case BCMA_CHIP_ID_BCM53572: -+ case BCMA_CHIP_ID_BCM47094: - chip->ngpio = 32; - break; - default: ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -294,7 +294,7 @@ static const struct pci_device_id bcma_p - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) }, -- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, -+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) }, --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c @@ -98,6 +98,9 @@ static const struct bcma_device_id_name @@ -51,6 +290,32 @@ { BCMA_CORE_DEFAULT, "Default" }, }; +@@ -315,6 +318,8 @@ static int bcma_get_next_core(struct bcm + switch (core->id.id) { + case BCMA_CORE_4706_MAC_GBIT_COMMON: + case BCMA_CORE_NS_CHIPCOMMON_B: ++ case BCMA_CORE_PMU: ++ case BCMA_CORE_GCI: + /* Not used yet: case BCMA_CORE_OOB_ROUTER: */ + break; + default: +--- a/drivers/net/wireless/b43/main.c ++++ b/drivers/net/wireless/b43/main.c +@@ -1215,10 +1215,10 @@ void b43_wireless_core_phy_pll_reset(str + case B43_BUS_BCMA: + bcma_cc = &dev->dev->bdev->bus->drv_cc; + +- bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0); +- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4); +- bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4); +- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4); ++ bcma_cc_write32(bcma_cc, BCMA_CC_PMU_CHIPCTL_ADDR, 0); ++ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4); ++ bcma_cc_set32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, 0x4); ++ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4); + break; + #endif + #ifdef CONFIG_B43_SSB --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -151,6 +151,8 @@ struct bcma_host_ops { @@ -70,3 +335,110 @@ #define BCMA_CHIP_ID_BCM53018 53018 /* Board types (on PCI usually equals to the subsystem dev id) */ +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -217,6 +217,11 @@ + #define BCMA_CC_CLKDIV_JTAG_SHIFT 8 + #define BCMA_CC_CLKDIV_UART 0x000000FF + #define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ ++#define BCMA_CC_CAP_EXT_SECI_PRESENT 0x00000001 ++#define BCMA_CC_CAP_EXT_GSIO_PRESENT 0x00000002 ++#define BCMA_CC_CAP_EXT_GCI_PRESENT 0x00000004 ++#define BCMA_CC_CAP_EXT_SECI_PUART_PRESENT 0x00000008 /* UART present */ ++#define BCMA_CC_CAP_EXT_AOB_PRESENT 0x00000040 + #define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ + #define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ + #define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ +@@ -351,12 +356,12 @@ + #define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ + #define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ + #define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ +-#define BCMA_CC_CHIPCTL_ADDR 0x0650 +-#define BCMA_CC_CHIPCTL_DATA 0x0654 +-#define BCMA_CC_REGCTL_ADDR 0x0658 +-#define BCMA_CC_REGCTL_DATA 0x065C +-#define BCMA_CC_PLLCTL_ADDR 0x0660 +-#define BCMA_CC_PLLCTL_DATA 0x0664 ++#define BCMA_CC_PMU_CHIPCTL_ADDR 0x0650 ++#define BCMA_CC_PMU_CHIPCTL_DATA 0x0654 ++#define BCMA_CC_PMU_REGCTL_ADDR 0x0658 ++#define BCMA_CC_PMU_REGCTL_DATA 0x065C ++#define BCMA_CC_PMU_PLLCTL_ADDR 0x0660 ++#define BCMA_CC_PMU_PLLCTL_DATA 0x0664 + #define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */ + #define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */ + #define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF +@@ -566,6 +571,7 @@ + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ + struct bcma_chipcommon_pmu { ++ struct bcma_device *core; /* Can be separated core or just ChipCommon one */ + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ + }; +@@ -663,6 +669,19 @@ struct bcma_drv_cc_b { + #define bcma_cc_maskset32(cc, offset, mask, set) \ + bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) + ++/* PMU registers access */ ++#define bcma_pmu_read32(cc, offset) \ ++ bcma_read32((cc)->pmu.core, offset) ++#define bcma_pmu_write32(cc, offset, val) \ ++ bcma_write32((cc)->pmu.core, offset, val) ++ ++#define bcma_pmu_mask32(cc, offset, mask) \ ++ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) & (mask)) ++#define bcma_pmu_set32(cc, offset, set) \ ++ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) | (set)) ++#define bcma_pmu_maskset32(cc, offset, mask, set) \ ++ bcma_pmu_write32(cc, offset, (bcma_pmu_read32(cc, offset) & (mask)) | (set)) ++ + extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); + + extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); +--- a/drivers/bcma/bcma_private.h ++++ b/drivers/bcma/bcma_private.h +@@ -47,7 +47,6 @@ void bcma_core_chipcommon_early_init(str + void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); + void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); + #ifdef CONFIG_BCMA_DRIVER_MIPS +-void bcma_chipco_serial_init(struct bcma_drv_cc *cc); + extern struct platform_device bcma_pflash_dev; + #endif /* CONFIG_BCMA_DRIVER_MIPS */ + +--- a/drivers/bcma/driver_gpio.c ++++ b/drivers/bcma/driver_gpio.c +@@ -229,6 +229,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c + case BCMA_CHIP_ID_BCM4707: + case BCMA_CHIP_ID_BCM5357: + case BCMA_CHIP_ID_BCM53572: ++ case BCMA_CHIP_ID_BCM47094: + chip->ngpio = 32; + break; + default: +--- a/drivers/bcma/driver_mips.c ++++ b/drivers/bcma/driver_mips.c +@@ -328,12 +328,9 @@ static void bcma_core_mips_flash_detect( + + void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) + { +- struct bcma_bus *bus = mcore->core->bus; +- + if (mcore->early_setup_done) + return; + +- bcma_chipco_serial_init(&bus->drv_cc); + bcma_core_mips_flash_detect(mcore); + + mcore->early_setup_done = true; +--- a/drivers/bcma/host_pci.c ++++ b/drivers/bcma/host_pci.c +@@ -294,7 +294,7 @@ static const struct pci_device_id bcma_p + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) }, +- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, ++ { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) }, |