aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/generic/files/drivers/net/phy/ar8216.c93
1 files changed, 61 insertions, 32 deletions
diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index 2f48d7bd56..587f41fc02 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -44,6 +44,8 @@ struct ar8216_priv {
struct net_device_ops ndo;
struct mutex reg_mutex;
int chip;
+ bool initialized;
+ bool port4_phy;
/* all fields below are cleared on reset */
bool vlan;
@@ -511,32 +513,24 @@ ar8216_hw_apply(struct switch_dev *dev)
static int
ar8316_hw_init(struct ar8216_priv *priv) {
- static int initialized;
int i;
- u32 val;
+ u32 val, newval;
struct mii_bus *bus;
- if (initialized)
- return 0;
-
val = priv->read(priv, 0x8);
if (priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
- /* value taken from Ubiquiti RouterStation Pro */
- if (val == 0x81461bea) {
- /* switch already intialized by bootloader */
- initialized = true;
- return 0;
+ if (priv->port4_phy) {
+ /* value taken from Ubiquiti RouterStation Pro */
+ newval = 0x81461bea;
+ printk(KERN_INFO "ar8316: Using port 4 as PHY\n");
+ } else {
+ newval = 0x01261be2;
+ printk(KERN_INFO "ar8316: Using port 4 as switch port\n");
}
- priv->write(priv, 0x8, 0x81461bea);
} else if (priv->phy->interface == PHY_INTERFACE_MODE_GMII) {
/* value taken from AVM Fritz!Box 7390 sources */
- if (val == 0x010e5b71) {
- /* switch already initialized by bootloader */
- initialized = true;
- return 0;
- }
- priv->write(priv, 0x8, 0x010e5b71);
+ newval = 0x010e5b71;
} else {
/* no known value for phy interface */
printk(KERN_ERR "ar8316: unsupported mii mode: %d.\n",
@@ -544,14 +538,19 @@ ar8316_hw_init(struct ar8216_priv *priv) {
return -EINVAL;
}
+ if (val == newval)
+ goto out;
+
+ priv->write(priv, 0x8, newval);
+
/* standard atheros magic */
priv->write(priv, 0x38, 0xc000050e);
/* Initialize the ports */
bus = priv->phy->bus;
for (i = 0; i < 5; i++) {
- if ((i == 4) &&
- priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
+ if ((i == 4) && priv->port4_phy &&
+ priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
/* work around for phy4 rgmii mode */
bus->write(bus, i, MII_ATH_DBG_ADDR, 0x12);
bus->write(bus, i, MII_ATH_DBG_DATA, 0x480c);
@@ -571,7 +570,9 @@ ar8316_hw_init(struct ar8216_priv *priv) {
bus->write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
msleep(1000);
}
- initialized = true;
+
+out:
+ priv->initialized = true;
return 0;
}
@@ -656,33 +657,58 @@ static const struct switch_dev_ops ar8216_ops = {
static int
ar8216_config_init(struct phy_device *pdev)
{
- struct ar8216_priv *priv;
+ struct ar8216_priv *priv = pdev->priv;
struct net_device *dev = pdev->attached_dev;
struct switch_dev *swdev;
int ret;
- priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
- if (priv == NULL)
- return -ENOMEM;
+ if (!priv) {
+ priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+ }
priv->phy = pdev;
priv->chip = ar8216_id_chip(priv);
- if (pdev->addr == 0)
- printk(KERN_INFO "%s: AR%d switch driver attached.\n",
- pdev->attached_dev->name, priv->chip);
-
-
if (pdev->addr != 0) {
if (priv->chip == AR8316) {
pdev->supported |= SUPPORTED_1000baseT_Full;
pdev->advertising |= ADVERTISED_1000baseT_Full;
+
+ /* check if we're attaching to the switch twice */
+ pdev = pdev->bus->phy_map[0];
+ if (!pdev) {
+ kfree(priv);
+ return 0;
+ }
+
+ /* switch device has not been initialized, reuse priv */
+ if (!pdev->priv) {
+ priv->port4_phy = true;
+ pdev->priv = priv;
+ return 0;
+ }
+
+ kfree(priv);
+
+ /* switch device has been initialized, reinit */
+ priv = pdev->priv;
+ priv->dev.ports = (AR8216_NUM_PORTS - 1);
+ priv->initialized = false;
+ priv->port4_phy = true;
+ ar8316_hw_init(priv);
+ return 0;
}
+
kfree(priv);
return 0;
}
+ printk(KERN_INFO "%s: AR%d switch driver attached.\n",
+ pdev->attached_dev->name, priv->chip);
+
pdev->supported = priv->chip == AR8316 ?
SUPPORTED_1000baseT_Full : SUPPORTED_100baseT_Full;
pdev->advertising = pdev->supported;
@@ -696,16 +722,19 @@ ar8216_config_init(struct phy_device *pdev)
swdev = &priv->dev;
swdev->cpu_port = AR8216_PORT_CPU;
swdev->ops = &ar8216_ops;
+ swdev->ports = AR8216_NUM_PORTS;
if (priv->chip == AR8316) {
swdev->name = "Atheros AR8316";
swdev->vlans = AR8X16_MAX_VLANS;
- /* port 5 connected to the other mac, therefore unusable */
- swdev->ports = (AR8216_NUM_PORTS - 1);
+
+ if (priv->port4_phy) {
+ /* port 5 connected to the other mac, therefore unusable */
+ swdev->ports = (AR8216_NUM_PORTS - 1);
+ }
} else {
swdev->name = "Atheros AR8216";
swdev->vlans = AR8216_NUM_VLANS;
- swdev->ports = AR8216_NUM_PORTS;
}
if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {