diff options
author | Thomas Roberts <tom.p.roberts@gmail.com> | 2017-02-13 17:29:34 +0000 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2017-02-20 09:10:17 +0100 |
commit | f9278337cf4b9c699a41dfc1e4c448213be53e61 (patch) | |
tree | b19f276ce789c6c08784846ee3765d801548b84f /tools/mtd-utils/Makefile | |
parent | 7c9f5c7e6b43650315603db1fe03c1c2fb857135 (diff) | |
download | upstream-f9278337cf4b9c699a41dfc1e4c448213be53e61.tar.gz upstream-f9278337cf4b9c699a41dfc1e4c448213be53e61.tar.bz2 upstream-f9278337cf4b9c699a41dfc1e4c448213be53e61.zip |
ar71xx: add support for TL-WR802N Version 2
This patch adds support for the TP-Link TL-WR802N Version 2.
Specification:
- SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc)
- RAM: 32 MiB
- Storage: 4 MiB of FLash on board
- Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n
- Ethernet: 1x100M (port0)
Installation through OEM Web Interface:
- Connect to TL-WR802N by Ethernet or Wi-Fi
- Go to http://192.168.0.1 (default user is "admin" & password is "admin)
- Go to "System Tools -> Firmware Upgrade"
- Browse for firmware "*.factory-us.bin" or "*.factory-eu.bin" for eu model
- Click upgrade
Installation through tftp:
Note: T_OUT, T_IN and GND on the board must be connected to USB TTL
Serial Configuration 115200 8n1
- Boot the TL-WR802N
- When "Autobooting in 1 seconds" appears type "tpl" followed by enter
- Connect to the board Ethernet port
(IPADDR: 192.168.1.1, ServerIP: 192.168.1.10)
- tftpboot 0x80000000 <Firmware Image Name>
- Record the result of "printenv bootcmd"
- Enter "erase <Result of 'printenv bootcmd'> +0x3c0000"
(e.g erase 0x9f020000 +0x3c0000)
- Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000"
(e.g cp.b 0x80000000 0x9f020000 0x3c0000)
- Enter "bootm <Result of 'printenv bootcmd'>"
(e.g bootm 0x9f020000)
Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
Diffstat (limited to 'tools/mtd-utils/Makefile')
0 files changed, 0 insertions, 0 deletions