aboutsummaryrefslogtreecommitdiffstats
path: root/tools/firmware-utils/src
diff options
context:
space:
mode:
authorChristoph Krapp <achterin@googlemail.com>2020-07-06 23:05:25 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-07-07 00:40:04 +0200
commitba0f4f0cfddc6f1152273565ec35f2a0bda1e95d (patch)
tree4070713b946d4ae29597b251f9b7c6910641ee18 /tools/firmware-utils/src
parent982468de35d499f85470b7b547d2b27cea53bae0 (diff)
downloadupstream-ba0f4f0cfddc6f1152273565ec35f2a0bda1e95d.tar.gz
upstream-ba0f4f0cfddc6f1152273565ec35f2a0bda1e95d.tar.bz2
upstream-ba0f4f0cfddc6f1152273565ec35f2a0bda1e95d.zip
ramips: add support for TP-Link RE500 v1
This device uses the same hardware as RE650 v1 which got supported in 8c51dde. Hardware specification: - SoC 880 MHz - MediaTek MT7621AT - 128 MB of DDR3 RAM - 16 MB - Winbond 25Q128FVSG - 4T4R 2.4 GHz - MediaTek MT7615E - 4T4R 5 GHz - MediaTek MT7615E - 1x 1 Gbps Ethernet - MT7621AT integrated - 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2)) - 4x buttons (Reset, Power, WPS, LED) - UART header (J1) - 2:GND, 3:RX, 4:TX Serial console @ 57600,8n1 Flash instructions: Upload openwrt-ramips-mt7621-tplink_re500-v1-squashfs-factory.bin from the RE500 web interface. TFTP recovery to stock firmware: Unfortunately, I can't find an easy way to recover the RE without opening the device and using modified binaries. The TFTP upload will only work if selected from u-boot, which means you have to open the device and attach to the serial console. The TFTP update procedure does *not* accept the published vendor firmware binaries. However, it allows to flash kernel + rootfs binaries, and this works if you have a backup of the original contents of the flash. It's probably possible to create special image out of the vendor binaries and use that as recovery image. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [remove dts-v1 in DTSI, do not touch WiFi LEDs for RE650, keep state_default in DTS files, fix label-mac-device, use lower case for WiFi LEDs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'tools/firmware-utils/src')
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c37
1 files changed, 37 insertions, 0 deletions
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index a97f329a87..6cd2a45247 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -1858,6 +1858,43 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the RE500 */
+ {
+ .id = "RE500-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
+ "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
+ "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
+ "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
+ "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = NULL,
+
+ /* We're using a dynamic kernel/rootfs split here */
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"firmware", 0x20000, 0xde0000},
+ {"partition-table", 0xe00000, 0x02000},
+ {"default-mac", 0xe10000, 0x00020},
+ {"pin", 0xe10100, 0x00020},
+ {"product-info", 0xe11100, 0x01000},
+ {"soft-version", 0xe20000, 0x01000},
+ {"support-list", 0xe21000, 0x01000},
+ {"profile", 0xe22000, 0x08000},
+ {"user-config", 0xe30000, 0x10000},
+ {"default-config", 0xe40000, 0x10000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the RE650 */
{
.id = "RE650-V1",