diff options
author | David Bauer <mail@david-bauer.net> | 2019-09-10 21:07:23 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2019-10-23 01:17:28 +0200 |
commit | 7f187229a8e9b7966248b1e024217e07a9fc3e50 (patch) | |
tree | ebfd222079b43f5a95365ee73223788a13256f8e /tools/Makefile | |
parent | c0f40781645297ad68678e3de2557b611e9f785c (diff) | |
download | upstream-7f187229a8e9b7966248b1e024217e07a9fc3e50.tar.gz upstream-7f187229a8e9b7966248b1e024217e07a9fc3e50.tar.bz2 upstream-7f187229a8e9b7966248b1e024217e07a9fc3e50.zip |
ipq40xx: add support for AVM FRITZ!Repeater 1200
Hardware
--------
SoC: Qualcomm IPQ4019
RAM: 256M DDR3
FLASH: 128M NAND
WiFi: 2T2R IPQ4019 bgn
2T2R IPQ4019 a/n/ac
ETH: Atheros AR8033 RGMII PHY
BTN: 1x Connect (WPS)
LED: Power (green/red/yellow)
Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz1200'
subdirectory. Place it in the same directory as the 'eva_ramboot.py'
script. It is located in the 'scripts/flashing' subdirectory of the
OpenWRT tree.
2. Assign yourself the IP address 192.168.178.10/24. Connect your
Computer to one of the boxes LAN ports.
3. Connect Power to the Box. As soon as the LAN port of your computer
shows link, load the U-Boot to the box using following command.
> ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin
4. The U-Boot will now start. Now assign yourself the IP address
192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
server root directory and rename it to 'FRITZ1200.bin'.
5. The Box will now boot OpenWRT from RAM. This can take up to two
minutes.
6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
scp. SSH into the Box and first write the Bootloader to both previous
kernel partitions.
> mtd write /path/to/uboot-fritz1200.bin uboot0
> mtd write /path/to/uboot-fritz1200.bin uboot1
7. Remove the AVM filesystem partitions to make room for our kernel +
rootfs + overlayfs.
> ubirmvol /dev/ubi0 --name=avm_filesys_0
> ubirmvol /dev/ubi0 --name=avm_filesys_1
8. Flash OpenWRT peristently using sysupgrade.
> sysupgrade -n /path/to/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'tools/Makefile')
0 files changed, 0 insertions, 0 deletions