aboutsummaryrefslogtreecommitdiffstats
path: root/toolchain/gcc/final
diff options
context:
space:
mode:
authorSven Roederer <freifunk@it-solutions.geroedel.de>2020-02-17 12:22:53 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-21 14:12:30 +0100
commit6a950afde1bf366b0a98a04e2cd43adbfa11fa74 (patch)
treeebd08e7651e95af84c8047087da1395ae759d0bc /toolchain/gcc/final
parent7cbd39421e6718f9320614b9d24370fb9822e056 (diff)
downloadupstream-6a950afde1bf366b0a98a04e2cd43adbfa11fa74.tar.gz
upstream-6a950afde1bf366b0a98a04e2cd43adbfa11fa74.tar.bz2
upstream-6a950afde1bf366b0a98a04e2cd43adbfa11fa74.zip
ath79: add support for Ubiquiti Nanostation Loco M (XM)
This adds support for the Ubiquiti Nanostation Loco M (XM), which has the same board/LEDs as the Bullet M XM, but different case and antennas. Specifications: - AR7241 SoC @ 400 MHz - 32 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in - NS Loco M2: built-in antenna: 8 dBi; AR9287 - NS Loco M5: built-in antenna: 13 dBi; 2T2R 5 GHz radio - POWER/LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) on PCB Flashing via WebUI: Upload the factory image via the stock firmware web UI. Note that only certain firmware versions accept unsigned images. Refer to the device's Wiki page for further information. Flashing via TFTP: Same procedure as other NanoStation M boards. - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset button on the device or on the PoE supply pressed - Power on the device via PoE (keep reset button pressed) - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button - The device starts a TFTP server at 192.168.1.20 - Set a static IP on the computer (e.g., 192.168.1.21/24) - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-squashfs-factory.bin Tested on NanoStation Loco M2. Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de> Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit b56bcfe3be40493daecf13a4080920de2994ff54)
Diffstat (limited to 'toolchain/gcc/final')
0 files changed, 0 insertions, 0 deletions