diff options
author | Danijel Tudek <danijel.tudek@gmail.com> | 2019-02-12 18:11:09 +0100 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2019-03-10 16:49:31 +0100 |
commit | eae6cac6a30b95bef04d033ed8a303b7e35a078b (patch) | |
tree | ef239887d57928b1366f714737b5fc3f92472bd2 /toolchain/binutils/Makefile | |
parent | 5026f4355953e6af66326c10822e9a6e937baaea (diff) | |
download | upstream-eae6cac6a30b95bef04d033ed8a303b7e35a078b.tar.gz upstream-eae6cac6a30b95bef04d033ed8a303b7e35a078b.tar.bz2 upstream-eae6cac6a30b95bef04d033ed8a303b7e35a078b.zip |
lantiq: add support for AVM FRITZ!Box 7362 SL
Hardware:
- SoC: Lantiq VRX288
- RAM: Winbond W971GG6JB 1 Gb (128 MiB)
- Flash:
- SPI: 8 Mb (1 MiB) for bootloader and tffs
- NAND: 1 Gb (128 MiB) for OS
- xDSL: Lantiq VRX208
- WLAN: Atheros AR9381
- DECT: Dialog Semiconductors SC14441
Everything except FXS/DECT works
(no drivers for AVM's FXS implementation with SC14441).
Installation via FTP:
1. Use scripts/flashing/eva_ramboot.py to send initramfs-kernel.bin
to the device when powering on.
Standard AVM procedures with finding the correct IP address and
the right moment to open FTP apply here (approx. 4 seconds on 7362SL).
IMPORTANT: set lzma compression in ramdisk options, bootloader stalls
when receiving uncompressed images.
2. Transfer sysupgrade.bin image with scp to /tmp directory
and run sysupgrade
3. First boot might take a bit longer if linux_fs_start was set to 1,
in that case the device will reboot twice, first time it will fail to load
second kernel (overwritten by ubifs), set linux_fs_start to 0 and reboot.
OpenWrt uses the entire NAND flash. Kernel uses 4 MiB and rootfs uses
the rest of 124 MiB, overwriting everything related to FRITZ!OS - both
OS images, config and answering machine/media server data.
To return to FRITZ!OS, use AVM's recovery image.
Signed-off-by: Danijel Tudek <danijel.tudek@gmail.com>
Diffstat (limited to 'toolchain/binutils/Makefile')
0 files changed, 0 insertions, 0 deletions