aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorDaniel Danzberger <daniel@dd-wrt.com>2022-08-03 17:31:03 +0200
committerFelix Fietkau <nbd@nbd.name>2022-09-05 11:12:32 +0200
commitf32085fc0b87049491b07e198d924d738a1a2834 (patch)
tree5383b5ef246e08830738801a12a6e8dc76b39c53 /target
parentf1802b0db7e22f98e1718e2c8bec29b2842f5aea (diff)
downloadupstream-f32085fc0b87049491b07e198d924d738a1a2834.tar.gz
upstream-f32085fc0b87049491b07e198d924d738a1a2834.tar.bz2
upstream-f32085fc0b87049491b07e198d924d738a1a2834.zip
airoha: Add new target platform
Airoha is a new ARM platform based on Cortex-A53 which has recently been merged into linux-next. Due to BootROM limitations on this platform, the Cortex-A53 can't run in Aarch64 mode and code must be compiled for 32-Bit ARM. This support is based mostly on those linux-next commits backported for kernel 5.15. Patches: 1 - platform support = linux-next 2 - clock driver = linux-next 3 - gpio driver = linux-next 4 - linux,usable-memory-range dts support = linux-next 5 - mtd spinand driver 6 - spi driver 7 - pci driver (kconfig only, uses mediatek PCI) = linux-next Still missing: - Ethernet driver - Sysupgrade support A.t.m there exists one subtarget EN7523 with only one evaluation board. The initramfs can be run with the following commands from u-boot: - u-boot> setenv bootfile \ openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin u-boot> tftpboot u-boot> bootm 0x81800000 - Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
Diffstat (limited to 'target')
-rw-r--r--target/linux/airoha/Makefile15
-rw-r--r--target/linux/airoha/config-5.15271
-rw-r--r--target/linux/airoha/dts/en7523-evb.dts73
-rw-r--r--target/linux/airoha/dts/en7523.dtsi219
-rw-r--r--target/linux/airoha/files/arch/arm/mach-airoha/Makefile2
-rw-r--r--target/linux/airoha/files/arch/arm/mach-airoha/airoha.c16
-rw-r--r--target/linux/airoha/files/drivers/clk/clk-en7523.c351
-rw-r--r--target/linux/airoha/files/drivers/gpio/gpio-en7523.c137
-rw-r--r--target/linux/airoha/files/include/dt-bindings/clock/en7523-clk.h17
-rw-r--r--target/linux/airoha/image/Makefile37
-rw-r--r--target/linux/airoha/image/en7523.mk0
-rw-r--r--target/linux/airoha/patches-5.15/0001-add-airoha-platform.patch35
-rw-r--r--target/linux/airoha/patches-5.15/0002-add-airoha-en7523-clk-driver.patch32
-rw-r--r--target/linux/airoha/patches-5.15/0003-add-airoha-en7523-gpio-driver.patch33
-rw-r--r--target/linux/airoha/patches-5.15/0004-ARM-9124-1-uncompress-Parse-linux-usable-memory-rang.patch111
-rw-r--r--target/linux/airoha/patches-5.15/0005-spi-Add-support-for-the-Airoha-EN7523-SoC-SPI-contro.patch346
-rw-r--r--target/linux/airoha/patches-5.15/0006-PCI-mediatek-Allow-building-for-ARCH_AIROHA.patch35
-rw-r--r--target/linux/generic/pending-5.15/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch137
18 files changed, 1867 insertions, 0 deletions
diff --git a/target/linux/airoha/Makefile b/target/linux/airoha/Makefile
new file mode 100644
index 0000000000..723bec8cd4
--- /dev/null
+++ b/target/linux/airoha/Makefile
@@ -0,0 +1,15 @@
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=airoha
+BOARDNAME:=Airoha ARM
+CPU_TYPE:=cortex-a7
+FEATURES:=dt squashfs nand ramdisk gpio source-only
+
+KERNEL_PATCHVER:=5.15
+
+include $(INCLUDE_DIR)/target.mk
+
+KERNELNAME:=Image dtbs
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/airoha/config-5.15 b/target/linux/airoha/config-5.15
new file mode 100644
index 0000000000..0fbf8a4995
--- /dev/null
+++ b/target/linux/airoha/config-5.15
@@ -0,0 +1,271 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_AIROHA=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_PSCI=y
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_SMMU is not set
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_PM=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_CACHE_L2X0=y
+# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_EN7523=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MISC=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_REMAP=y
+CONFIG_DTC=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_EN7523=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDENED_USERCOPY=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_SMP=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_FIXED=0
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_IO_URING=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGRATION=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NLS=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=2
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_MEDIATEK=y
+CONFIG_PCIE_PME=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_AIROHA_EN7523=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SRCU=y
+CONFIG_STACKTRACE=y
+# CONFIG_SWAP is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_PLATFORM is not set
+CONFIG_USE_OF=y
+# CONFIG_VFP is not set
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/airoha/dts/en7523-evb.dts b/target/linux/airoha/dts/en7523-evb.dts
new file mode 100644
index 0000000000..f311c840e0
--- /dev/null
+++ b/target/linux/airoha/dts/en7523-evb.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+ model = "Airoha EN7523 Evaluation Board";
+ compatible = "airoha,en7523-evb", "airoha,en7523";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ stdout-path = "serial0:115200n8";
+ linux,usable-memory-range = <0x80200000 0x1fe00000>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&nand {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x7C000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x7C000 0x4000>;
+ };
+
+ partition@2 {
+ label = "art";
+ reg = <0x80000 0x40000>;
+ read-only;
+ };
+
+ partition@3 {
+ label = "firmware";
+ reg = <0xC0000 0xDF40000>;
+ };
+ };
+};
diff --git a/target/linux/airoha/dts/en7523.dtsi b/target/linux/airoha/dts/en7523.dtsi
new file mode 100644
index 0000000000..72478b225c
--- /dev/null
+++ b/target/linux/airoha/dts/en7523.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ npu_binary@84000000 {
+ no-map;
+ reg = <0x84000000 0xA00000>;
+ };
+
+ npu_flag@84B0000 {
+ no-map;
+ reg = <0x84B00000 0x100000>;
+ };
+
+ npu_pkt@85000000 {
+ no-map;
+ reg = <0x85000000 0x1A00000>;
+ };
+
+ npu_phyaddr@86B00000 {
+ no-map;
+ reg = <0x86B00000 0x100000>;
+ };
+
+ npu_rxdesc@86D00000 {
+ no-map;
+ reg = <0x86D00000 0x100000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ clock-frequency = <80000000>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ clock-frequency = <80000000>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ scu: system-controller@1fa20000 {
+ compatible = "airoha,en7523-scu";
+ reg = <0x1fa20000 0x400>,
+ <0x1fb00000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ gic: interrupt-controller@9000000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x09000000 0x20000>,
+ <0x09080000 0x80000>,
+ <0x09400000 0x2000>,
+ <0x09500000 0x2000>,
+ <0x09600000 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ uart1: serial@1fbf0000 {
+ compatible = "ns16550";
+ reg = <0x1fbf0000 0x30>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <1843200>;
+ status = "okay";
+ };
+
+ gpio0: gpio@1fbf0200 {
+ compatible = "airoha,en7523-gpio";
+ reg = <0x1fbf0204 0x4>,
+ <0x1fbf0200 0x4>,
+ <0x1fbf0220 0x4>,
+ <0x1fbf0214 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio1: gpio@1fbf0270 {
+ compatible = "airoha,en7523-gpio";
+ reg = <0x1fbf0270 0x4>,
+ <0x1fbf0260 0x4>,
+ <0x1fbf0264 0x4>,
+ <0x1fbf0278 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pcie0: pcie@1fa91000 {
+ compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0x1fa91000 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&scu EN7523_CLK_PCIE>;
+ clock-names = "sys_ck0";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x20000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1fa92000 {
+ compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0x1fa92000 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&scu EN7523_CLK_PCIE>;
+ clock-names = "sys_ck1";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x28000000 0x28000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ spi_ctrl: spi_controller@1fa10000 {
+ compatible = "airoha,en7523-spi";
+ reg = <0x1fa10000 0x140>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+
+ nand: nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ nand-ecc-engine = <&nand>;
+ };
+ };
+};
diff --git a/target/linux/airoha/files/arch/arm/mach-airoha/Makefile b/target/linux/airoha/files/arch/arm/mach-airoha/Makefile
new file mode 100644
index 0000000000..a5857d0d02
--- /dev/null
+++ b/target/linux/airoha/files/arch/arm/mach-airoha/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += airoha.o
diff --git a/target/linux/airoha/files/arch/arm/mach-airoha/airoha.c b/target/linux/airoha/files/arch/arm/mach-airoha/airoha.c
new file mode 100644
index 0000000000..ea23b5abb4
--- /dev/null
+++ b/target/linux/airoha/files/arch/arm/mach-airoha/airoha.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree support for Airoha SoCs
+ *
+ * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
+ */
+#include <asm/mach/arch.h>
+
+static const char * const airoha_board_dt_compat[] = {
+ "airoha,en7523",
+ NULL,
+};
+
+DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
+ .dt_compat = airoha_board_dt_compat,
+MACHINE_END
diff --git a/target/linux/airoha/files/drivers/clk/clk-en7523.c b/target/linux/airoha/files/drivers/clk/clk-en7523.c
new file mode 100644
index 0000000000..29f0126cbd
--- /dev/null
+++ b/target/linux/airoha/files/drivers/clk/clk-en7523.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+#define REG_PCI_CONTROL 0x88
+#define REG_PCI_CONTROL_PERSTOUT BIT(29)
+#define REG_PCI_CONTROL_PERSTOUT1 BIT(26)
+#define REG_PCI_CONTROL_REFCLK_EN1 BIT(22)
+#define REG_GSW_CLK_DIV_SEL 0x1b4
+#define REG_EMI_CLK_DIV_SEL 0x1b8
+#define REG_BUS_CLK_DIV_SEL 0x1bc
+#define REG_SPI_CLK_DIV_SEL 0x1c4
+#define REG_SPI_CLK_FREQ_SEL 0x1c8
+#define REG_NPU_CLK_DIV_SEL 0x1fc
+#define REG_CRYPTO_CLKSRC 0x200
+#define REG_RESET_CONTROL 0x834
+#define REG_RESET_CONTROL_PCIEHB BIT(29)
+#define REG_RESET_CONTROL_PCIE1 BIT(27)
+#define REG_RESET_CONTROL_PCIE2 BIT(26)
+
+struct en_clk_desc {
+ int id;
+ const char *name;
+ u32 base_reg;
+ u8 base_bits;
+ u8 base_shift;
+ union {
+ const unsigned int *base_values;
+ unsigned int base_value;
+ };
+ size_t n_base_values;
+
+ u16 div_reg;
+ u8 div_bits;
+ u8 div_shift;
+ u16 div_val0;
+ u8 div_step;
+};
+
+struct en_clk_gate {
+ void __iomem *base;
+ struct clk_hw hw;
+};
+
+static const u32 gsw_base[] = { 400000000, 500000000 };
+static const u32 emi_base[] = { 333000000, 400000000 };
+static const u32 bus_base[] = { 500000000, 540000000 };
+static const u32 slic_base[] = { 100000000, 3125000 };
+static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
+
+static const struct en_clk_desc en7523_base_clks[] = {
+ {
+ .id = EN7523_CLK_GSW,
+ .name = "gsw",
+
+ .base_reg = REG_GSW_CLK_DIV_SEL,
+ .base_bits = 1,
+ .base_shift = 8,
+ .base_values = gsw_base,
+ .n_base_values = ARRAY_SIZE(gsw_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ }, {
+ .id = EN7523_CLK_EMI,
+ .name = "emi",
+
+ .base_reg = REG_EMI_CLK_DIV_SEL,
+ .base_bits = 1,
+ .base_shift = 8,
+ .base_values = emi_base,
+ .n_base_values = ARRAY_SIZE(emi_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ }, {
+ .id = EN7523_CLK_BUS,
+ .name = "bus",
+
+ .base_reg = REG_BUS_CLK_DIV_SEL,
+ .base_bits = 1,
+ .base_shift = 8,
+ .base_values = bus_base,
+ .n_base_values = ARRAY_SIZE(bus_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ }, {
+ .id = EN7523_CLK_SLIC,
+ .name = "slic",
+
+ .base_reg = REG_SPI_CLK_FREQ_SEL,
+ .base_bits = 1,
+ .base_shift = 0,
+ .base_values = slic_base,
+ .n_base_values = ARRAY_SIZE(slic_base),
+
+ .div_reg = REG_SPI_CLK_DIV_SEL,
+ .div_bits = 5,
+ .div_shift = 24,
+ .div_val0 = 20,
+ .div_step = 2,
+ }, {
+ .id = EN7523_CLK_SPI,
+ .name = "spi",
+
+ .base_reg = REG_SPI_CLK_DIV_SEL,
+
+ .base_value = 400000000,
+
+ .div_bits = 5,
+ .div_shift = 8,
+ .div_val0 = 40,
+ .div_step = 2,
+ }, {
+ .id = EN7523_CLK_NPU,
+ .name = "npu",
+
+ .base_reg = REG_NPU_CLK_DIV_SEL,
+ .base_bits = 2,
+ .base_shift = 8,
+ .base_values = npu_base,
+ .n_base_values = ARRAY_SIZE(npu_base),
+
+ .div_bits = 3,
+ .div_shift = 0,
+ .div_step = 1,
+ }, {
+ .id = EN7523_CLK_CRYPTO,
+ .name = "crypto",
+
+ .base_reg = REG_CRYPTO_CLKSRC,
+ .base_bits = 1,
+ .base_shift = 8,
+ .base_values = emi_base,
+ .n_base_values = ARRAY_SIZE(emi_base),
+ }
+};
+
+static const struct of_device_id of_match_clk_en7523[] = {
+ { .compatible = "airoha,en7523-scu", },
+ { /* sentinel */ }
+};
+
+static unsigned int en7523_get_base_rate(void __iomem *base, unsigned int i)
+{
+ const struct en_clk_desc *desc = &en7523_base_clks[i];
+ u32 val;
+
+ if (!desc->base_bits)
+ return desc->base_value;
+
+ val = readl(base + desc->base_reg);
+ val >>= desc->base_shift;
+ val &= (1 << desc->base_bits) - 1;
+
+ if (val >= desc->n_base_values)
+ return 0;
+
+ return desc->base_values[val];
+}
+
+static u32 en7523_get_div(void __iomem *base, int i)
+{
+ const struct en_clk_desc *desc = &en7523_base_clks[i];
+ u32 reg, val;
+
+ if (!desc->div_bits)
+ return 1;
+
+ reg = desc->div_reg ? desc->div_reg : desc->base_reg;
+ val = readl(base + reg);
+ val >>= desc->div_shift;
+ val &= (1 << desc->div_bits) - 1;
+
+ if (!val && desc->div_val0)
+ return desc->div_val0;
+
+ return (val + 1) * desc->div_step;
+}
+
+static int en7523_pci_is_enabled(struct clk_hw *hw)
+{
+ struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+
+ return !!(readl(cg->base + REG_PCI_CONTROL) & REG_PCI_CONTROL_REFCLK_EN1);
+}
+
+static int en7523_pci_prepare(struct clk_hw *hw)
+{
+ struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+ void __iomem *np_base = cg->base;
+ u32 val, mask;
+
+ /* Need to pull device low before reset */
+ val = readl(np_base + REG_PCI_CONTROL);
+ val &= ~(REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT);
+ writel(val, np_base + REG_PCI_CONTROL);
+ usleep_range(1000, 2000);
+
+ /* Enable PCIe port 1 */
+ val |= REG_PCI_CONTROL_REFCLK_EN1;
+ writel(val, np_base + REG_PCI_CONTROL);
+ usleep_range(1000, 2000);
+
+ /* Reset to default */
+ val = readl(np_base + REG_RESET_CONTROL);
+ mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
+ REG_RESET_CONTROL_PCIEHB;
+ writel(val & ~mask, np_base + REG_RESET_CONTROL);
+ usleep_range(1000, 2000);
+ writel(val | mask, np_base + REG_RESET_CONTROL);
+ msleep(100);
+ writel(val & ~mask, np_base + REG_RESET_CONTROL);
+ usleep_range(5000, 10000);
+
+ /* Release device */
+ mask = REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT;
+ val = readl(np_base + REG_PCI_CONTROL);
+ writel(val & ~mask, np_base + REG_PCI_CONTROL);
+ usleep_range(1000, 2000);
+ writel(val | mask, np_base + REG_PCI_CONTROL);
+ msleep(250);
+
+ return 0;
+}
+
+static void en7523_pci_unprepare(struct clk_hw *hw)
+{
+ struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
+ void __iomem *np_base = cg->base;
+ u32 val;
+
+ val = readl(np_base + REG_PCI_CONTROL);
+ val &= ~REG_PCI_CONTROL_REFCLK_EN1;
+ writel(val, np_base + REG_PCI_CONTROL);
+}
+
+static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
+ void __iomem *np_base)
+{
+ static const struct clk_ops pcie_gate_ops = {
+ .is_enabled = en7523_pci_is_enabled,
+ .prepare = en7523_pci_prepare,
+ .unprepare = en7523_pci_unprepare,
+ };
+ struct clk_init_data init = {
+ .name = "pcie",
+ .ops = &pcie_gate_ops,
+ };
+ struct en_clk_gate *cg;
+
+ cg = devm_kzalloc(dev, sizeof(*cg), GFP_KERNEL);
+ if (!cg)
+ return NULL;
+
+ cg->base = np_base;
+ cg->hw.init = &init;
+ en7523_pci_unprepare(&cg->hw);
+
+ if (clk_hw_register(dev, &cg->hw))
+ return NULL;
+
+ return &cg->hw;
+}
+
+static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
+ void __iomem *base, void __iomem *np_base)
+{
+ struct clk_hw *hw;
+ u32 rate;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
+ const struct en_clk_desc *desc = &en7523_base_clks[i];
+
+ rate = en7523_get_base_rate(base, i);
+ rate /= en7523_get_div(base, i);
+
+ hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
+ if (IS_ERR(hw)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ desc->name, PTR_ERR(hw));
+ continue;
+ }
+
+ clk_data->hws[desc->id] = hw;
+ }
+
+ hw = en7523_register_pcie_clk(dev, np_base);
+ clk_data->hws[EN7523_CLK_PCIE] = hw;
+
+ clk_data->num = EN7523_NUM_CLOCKS;
+}
+
+static int en7523_clk_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct clk_hw_onecell_data *clk_data;
+ void __iomem *base, *np_base;
+ int r;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ np_base = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(np_base))
+ return PTR_ERR(np_base);
+
+ clk_data = devm_kzalloc(&pdev->dev,
+ struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
+ GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
+
+ r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+ if (r)
+ dev_err(&pdev->dev,
+ "could not register clock provider: %s: %d\n",
+ pdev->name, r);
+
+ return r;
+}
+
+static struct platform_driver clk_en7523_drv = {
+ .probe = en7523_clk_probe,
+ .driver = {
+ .name = "clk-en7523",
+ .of_match_table = of_match_clk_en7523,
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int __init clk_en7523_init(void)
+{
+ return platform_driver_register(&clk_en7523_drv);
+}
+
+arch_initcall(clk_en7523_init);
diff --git a/target/linux/airoha/files/drivers/gpio/gpio-en7523.c b/target/linux/airoha/files/drivers/gpio/gpio-en7523.c
new file mode 100644
index 0000000000..f836a8db4c
--- /dev/null
+++ b/target/linux/airoha/files/drivers/gpio/gpio-en7523.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define AIROHA_GPIO_MAX 32
+
+/**
+ * airoha_gpio_ctrl - Airoha GPIO driver data
+ * @gc: Associated gpio_chip instance.
+ * @data: The data register.
+ * @dir0: The direction register for the lower 16 pins.
+ * @dir1: The direction register for the higher 16 pins.
+ * @output: The output enable register.
+ */
+struct airoha_gpio_ctrl {
+ struct gpio_chip gc;
+ void __iomem *data;
+ void __iomem *dir[2];
+ void __iomem *output;
+};
+
+static struct airoha_gpio_ctrl *gc_to_ctrl(struct gpio_chip *gc)
+{
+ return container_of(gc, struct airoha_gpio_ctrl, gc);
+}
+
+static int airoha_dir_set(struct gpio_chip *gc, unsigned int gpio,
+ int val, int out)
+{
+ struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+ u32 dir = ioread32(ctrl->dir[gpio / 16]);
+ u32 output = ioread32(ctrl->output);
+ u32 mask = BIT((gpio % 16) * 2);
+
+ if (out) {
+ dir |= mask;
+ output |= BIT(gpio);
+ } else {
+ dir &= ~mask;
+ output &= ~BIT(gpio);
+ }
+
+ iowrite32(dir, ctrl->dir[gpio / 16]);
+
+ if (out)
+ gc->set(gc, gpio, val);
+
+ iowrite32(output, ctrl->output);
+
+ return 0;
+}
+
+static int airoha_dir_out(struct gpio_chip *gc, unsigned int gpio,
+ int val)
+{
+ return airoha_dir_set(gc, gpio, val, 1);
+}
+
+static int airoha_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ return airoha_dir_set(gc, gpio, 0, 0);
+}
+
+static int airoha_get_dir(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct airoha_gpio_ctrl *ctrl = gc_to_ctrl(gc);
+ u32 dir = ioread32(ctrl->dir[gpio / 16]);
+ u32 mask = BIT((gpio % 16) * 2);
+
+ return (dir & mask) ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
+static int airoha_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct airoha_gpio_ctrl *ctrl;
+ int err;
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ ctrl->data = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ctrl->data))
+ return PTR_ERR(ctrl->data);
+
+ ctrl->dir[0] = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(ctrl->dir[0]))
+ return PTR_ERR(ctrl->dir[0]);
+
+ ctrl->dir[1] = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(ctrl->dir[1]))
+ return PTR_ERR(ctrl->dir[1]);
+
+ ctrl->output = devm_platform_ioremap_resource(pdev, 3);
+ if (IS_ERR(ctrl->output))
+ return PTR_ERR(ctrl->output);
+
+ err = bgpio_init(&ctrl->gc, dev, 4, ctrl->data, NULL,
+ NULL, NULL, NULL, 0);
+ if (err)
+ return dev_err_probe(dev, err, "unable to init generic GPIO");
+
+ ctrl->gc.ngpio = AIROHA_GPIO_MAX;
+ ctrl->gc.owner = THIS_MODULE;
+ ctrl->gc.direction_output = airoha_dir_out;
+ ctrl->gc.direction_input = airoha_dir_in;
+ ctrl->gc.get_direction = airoha_get_dir;
+
+ return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+}
+
+static const struct of_device_id airoha_gpio_of_match[] = {
+ { .compatible = "airoha,en7523-gpio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, airoha_gpio_of_match);
+
+static struct platform_driver airoha_gpio_driver = {
+ .driver = {
+ .name = "airoha-gpio",
+ .of_match_table = airoha_gpio_of_match,
+ },
+ .probe = airoha_gpio_probe,
+};
+module_platform_driver(airoha_gpio_driver);
+
+MODULE_DESCRIPTION("Airoha GPIO support");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/airoha/files/include/dt-bindings/clock/en7523-clk.h b/target/linux/airoha/files/include/dt-bindings/clock/en7523-clk.h
new file mode 100644
index 0000000000..717d23a5e5
--- /dev/null
+++ b/target/linux/airoha/files/include/dt-bindings/clock/en7523-clk.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+#define _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_
+
+#define EN7523_CLK_GSW 0
+#define EN7523_CLK_EMI 1
+#define EN7523_CLK_BUS 2
+#define EN7523_CLK_SLIC 3
+#define EN7523_CLK_SPI 4
+#define EN7523_CLK_NPU 5
+#define EN7523_CLK_CRYPTO 6
+#define EN7523_CLK_PCIE 7
+
+#define EN7523_NUM_CLOCKS 8
+
+#endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
diff --git a/target/linux/airoha/image/Makefile b/target/linux/airoha/image/Makefile
new file mode 100644
index 0000000000..c6def5ad65
--- /dev/null
+++ b/target/linux/airoha/image/Makefile
@@ -0,0 +1,37 @@
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+KERNEL_LOADADDR := 0x80208000
+
+define Target/Description
+ Build firmware images for Airoha EN7523 ARM based boards.
+endef
+
+# default all platform image(fit) build
+define Device/Default
+ PROFILES = Default $$(DEVICE_NAME)
+ KERNEL_NAME := Image
+ KERNEL = kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+ KERNEL_INITRAMFS = kernel-bin | lzma | \
+ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
+ FILESYSTEMS := squashfs
+ DEVICE_DTS_DIR := $(DTS_DIR)
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | \
+ pad-rootfs | append-metadata
+endef
+
+define Image/Build
+ $(call Image/Build/$(1),$(1))
+endef
+
+define Device/airoha_en7523-evb
+ DEVICE_VENDOR := Airoha
+ DEVICE_MODEL := EN7523 Evaluation Board
+ DEVICE_DTS := en7523-evb
+ DEVICE_DTS_DIR := ../dts
+endef
+TARGET_DEVICES += airoha_en7523-evb
+
+$(eval $(call BuildImage))
diff --git a/target/linux/airoha/image/en7523.mk b/target/linux/airoha/image/en7523.mk
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/target/linux/airoha/image/en7523.mk
diff --git a/target/linux/airoha/patches-5.15/0001-add-airoha-platform.patch b/target/linux/airoha/patches-5.15/0001-add-airoha-platform.patch
new file mode 100644
index 0000000000..b1f88a6ac7
--- /dev/null
+++ b/target/linux/airoha/patches-5.15/0001-add-airoha-platform.patch
@@ -0,0 +1,35 @@
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index 66f5d6c3..05cd3385 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -571,6 +571,18 @@ config ARCH_VIRT
+ select HAVE_ARM_ARCH_TIMER
+ select ARCH_SUPPORTS_BIG_ENDIAN
+
++config ARCH_AIROHA
++ bool "Airoha SoC Support"
++ depends on ARCH_MULTI_V7
++ select ARM_AMBA
++ select ARM_GIC
++ select ARM_GIC_V3
++ select ARM_PSCI
++ select HAVE_ARM_ARCH_TIMER
++ select COMMON_CLK
++ help
++ Support for Airoha EN7523 SoCs
++
+ #
+ # This is sorted alphabetically by mach-* pathname. However, plat-*
+ # Kconfigs may be included either alphabetically (according to the
+diff --git a/arch/arm/Makefile b/arch/arm/Makefile
+index fa45837b..c34f7463 100644
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -156,6 +156,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
+ # Machine directory name. This list is sorted alphanumerically
+ # by CONFIG_* macro name.
+ machine-$(CONFIG_ARCH_ACTIONS) += actions
++machine-$(CONFIG_ARCH_AIROHA) += airoha
+ machine-$(CONFIG_ARCH_ALPINE) += alpine
+ machine-$(CONFIG_ARCH_ARTPEC) += artpec
+ machine-$(CONFIG_ARCH_ASPEED) += aspeed
diff --git a/target/linux/airoha/patches-5.15/0002-add-airoha-en7523-clk-driver.patch b/target/linux/airoha/patches-5.15/0002-add-airoha-en7523-clk-driver.patch
new file mode 100644
index 0000000000..676e0f40bb
--- /dev/null
+++ b/target/linux/airoha/patches-5.15/0002-add-airoha-en7523-clk-driver.patch
@@ -0,0 +1,32 @@
+diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
+index c5b3dc97..c973ac1a 100644
+--- a/drivers/clk/Kconfig
++++ b/drivers/clk/Kconfig
+@@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
+ help
+ If you say yes here you get support for the CS2000 clock multiplier.
+
++config COMMON_CLK_EN7523
++ bool "Clock driver for Airoha EN7523 SoC system clocks"
++ depends on OF
++ depends on ARCH_AIROHA || COMPILE_TEST
++ default ARCH_AIROHA
++ help
++ This driver provides the fixed clocks and gates present on Airoha
++ ARM silicon.
++
+ config COMMON_CLK_FSL_FLEXSPI
+ tristate "Clock driver for FlexSPI on Layerscape SoCs"
+ depends on ARCH_LAYERSCAPE || COMPILE_TEST
+diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
+index e4231212..be11d88c 100644
+--- a/drivers/clk/Makefile
++++ b/drivers/clk/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
+ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
+ obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
+ obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o
++obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o
+ obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
+ obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o
+ obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
diff --git a/target/linux/airoha/patches-5.15/0003-add-airoha-en7523-gpio-driver.patch b/target/linux/airoha/patches-5.15/0003-add-airoha-en7523-gpio-driver.patch
new file mode 100644
index 0000000000..1d95e6b2c8
--- /dev/null
+++ b/target/linux/airoha/patches-5.15/0003-add-airoha-en7523-gpio-driver.patch
@@ -0,0 +1,33 @@
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index cbfb6f13..b3106df6 100644
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -247,6 +247,16 @@ config GPIO_EM
+ help
+ Say yes here to support GPIO on Renesas Emma Mobile SoCs.
+
++config GPIO_EN7523
++ tristate "Airoha GPIO support"
++ depends on ARCH_AIROHA
++ default ARCH_AIROHA
++ select GPIO_GENERIC
++ select GPIOLIB_IRQCHIP
++ help
++ Say Y or M here to support the GPIO controller block on the
++ Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
++
+ config GPIO_EP93XX
+ def_bool y
+ depends on ARCH_EP93XX
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 61202717..4c73ce82 100644
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -57,6 +57,7 @@ obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
+ obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
+ obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o
+ obj-$(CONFIG_GPIO_EM) += gpio-em.o
++obj-$(CONFIG_GPIO_EN7523) += gpio-en7523.o
+ obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
+ obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o
+ obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
diff --git a/target/linux/airoha/patches-5.15/0004-ARM-9124-1-uncompress-Parse-linux-usable-memory-rang.patch b/target/linux/airoha/patches-5.15/0004-ARM-9124-1-uncompress-Parse-linux-usable-memory-rang.patch
new file mode 100644
index 0000000000..f13ab2b0ed
--- /dev/null
+++ b/target/linux/airoha/patches-5.15/0004-ARM-9124-1-uncompress-Parse-linux-usable-memory-rang.patch
@@ -0,0 +1,111 @@
+From 48342ae751c797ac73ac9c894b3f312df18ffd21 Mon Sep 17 00:00:00 2001
+From: Geert Uytterhoeven <geert+renesas@glider.be>
+Date: Wed, 15 Sep 2021 13:46:20 +0100
+Subject: [PATCH] ARM: 9124/1: uncompress: Parse "linux,usable-memory-range" DT
+ property
+
+Add support for parsing the "linux,usable-memory-range" DT property.
+This property is used to describe the usable memory reserved for the
+crash dump kernel, and thus makes the memory reservation explicit.
+If present, Linux no longer needs to mask the program counter, and rely
+on the "mem=" kernel parameter to obtain the start and size of usable
+memory.
+
+For backwards compatibility, the traditional method to derive the start
+of memory is still used if "linux,usable-memory-range" is absent.
+
+Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
+---
+ .../arm/boot/compressed/fdt_check_mem_start.c | 48 ++++++++++++++++---
+ 1 file changed, 42 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
+index 62450d824c3c..9291a2661bdf 100644
+--- a/arch/arm/boot/compressed/fdt_check_mem_start.c
++++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
+@@ -55,16 +55,17 @@ static uint64_t get_val(const fdt32_t *cells, uint32_t ncells)
+ * DTB, and, if out-of-range, replace it by the real start address.
+ * To preserve backwards compatibility (systems reserving a block of memory
+ * at the start of physical memory, kdump, ...), the traditional method is
+- * always used if it yields a valid address.
++ * used if it yields a valid address, unless the "linux,usable-memory-range"
++ * property is present.
+ *
+ * Return value: start address of physical memory to use
+ */
+ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+ {
+- uint32_t addr_cells, size_cells, base;
++ uint32_t addr_cells, size_cells, usable_base, base;
+ uint32_t fdt_mem_start = 0xffffffff;
+- const fdt32_t *reg, *endp;
+- uint64_t size, end;
++ const fdt32_t *usable, *reg, *endp;
++ uint64_t size, usable_end, end;
+ const char *type;
+ int offset, len;
+
+@@ -80,6 +81,27 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+ if (addr_cells > 2 || size_cells > 2)
+ return mem_start;
+
++ /*
++ * Usable memory in case of a crash dump kernel
++ * This property describes a limitation: memory within this range is
++ * only valid when also described through another mechanism
++ */
++ usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
++ (addr_cells + size_cells) * sizeof(fdt32_t));
++ if (usable) {
++ size = get_val(usable + addr_cells, size_cells);
++ if (!size)
++ return mem_start;
++
++ if (addr_cells > 1 && fdt32_ld(usable)) {
++ /* Outside 32-bit address space */
++ return mem_start;
++ }
++
++ usable_base = fdt32_ld(usable + addr_cells - 1);
++ usable_end = usable_base + size;
++ }
++
+ /* Walk all memory nodes and regions */
+ for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+@@ -107,7 +129,20 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+
+ base = fdt32_ld(reg + addr_cells - 1);
+ end = base + size;
+- if (mem_start >= base && mem_start < end) {
++ if (usable) {
++ /*
++ * Clip to usable range, which takes precedence
++ * over mem_start
++ */
++ if (base < usable_base)
++ base = usable_base;
++
++ if (end > usable_end)
++ end = usable_end;
++
++ if (end <= base)
++ continue;
++ } else if (mem_start >= base && mem_start < end) {
+ /* Calculated address is valid, use it */
+ return mem_start;
+ }
+@@ -123,7 +158,8 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+ }
+
+ /*
+- * The calculated address is not usable.
++ * The calculated address is not usable, or was overridden by the
++ * "linux,usable-memory-range" property.
+ * Use the lowest usable physical memory address from the DTB instead,
+ * and make sure this is a multiple of 2 MiB for phys/virt patching.
+ */
+--
+2.35.1
diff --git a/target/linux/airoha/patches-5.15/0005-spi-Add-support-for-the-Airoha-EN7523-SoC-SPI-contro.patch b/target/linux/airoha/patches-5.15/0005-spi-Add-support-for-the-Airoha-EN7523-SoC-SPI-contro.patch
new file mode 100644
index 0000000000..e368acc0cf
--- /dev/null
+++ b/target/linux/airoha/patches-5.15/0005-spi-Add-support-for-the-Airoha-EN7523-SoC-SPI-contro.patch
@@ -0,0 +1,346 @@
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 83e352b0..5f7defe4 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -308,6 +308,12 @@ config SPI_DLN2
+ This driver can also be built as a module. If so, the module
+ will be called spi-dln2.
+
++config SPI_AIROHA_EN7523
++ bool "Airoha EN7523 SPI controller support"
++ depends on ARCH_AIROHA
++ help
++ This enables SPI controller support for the Airoha EN7523 SoC.
++
+ config SPI_EP93XX
+ tristate "Cirrus Logic EP93xx SPI controller"
+ depends on ARCH_EP93XX || COMPILE_TEST
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 699db95c..6c9460f7 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_DW_BT1) += spi-dw-bt1.o
+ obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o
+ obj-$(CONFIG_SPI_DW_PCI) += spi-dw-pci.o
+ obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
++obj-$(CONFIG_SPI_AIROHA_EN7523) += spi-en7523.o
+ obj-$(CONFIG_SPI_FALCON) += spi-falcon.o
+ obj-$(CONFIG_SPI_FSI) += spi-fsi.o
+ obj-$(CONFIG_SPI_FSL_CPM) += spi-fsl-cpm.o
+diff --git a/drivers/spi/spi-en7523.c b/drivers/spi/spi-en7523.c
+new file mode 100644
+index 00000000..322bf2eb
+--- /dev/null
++++ b/drivers/spi/spi-en7523.c
+@@ -0,0 +1,311 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mod_devicetable.h>
++#include <linux/spi/spi.h>
++
++
++#define ENSPI_READ_IDLE_EN 0x0004
++#define ENSPI_MTX_MODE_TOG 0x0014
++#define ENSPI_RDCTL_FSM 0x0018
++#define ENSPI_MANUAL_EN 0x0020
++#define ENSPI_MANUAL_OPFIFO_EMPTY 0x0024
++#define ENSPI_MANUAL_OPFIFO_WDATA 0x0028
++#define ENSPI_MANUAL_OPFIFO_FULL 0x002C
++#define ENSPI_MANUAL_OPFIFO_WR 0x0030
++#define ENSPI_MANUAL_DFIFO_FULL 0x0034
++#define ENSPI_MANUAL_DFIFO_WDATA 0x0038
++#define ENSPI_MANUAL_DFIFO_EMPTY 0x003C
++#define ENSPI_MANUAL_DFIFO_RD 0x0040
++#define ENSPI_MANUAL_DFIFO_RDATA 0x0044
++#define ENSPI_IER 0x0090
++#define ENSPI_NFI2SPI_EN 0x0130
++
++// TODO not in spi block
++#define ENSPI_CLOCK_DIVIDER ((void __iomem *)0x1fa201c4)
++
++#define OP_CSH 0x00
++#define OP_CSL 0x01
++#define OP_CK 0x02
++#define OP_OUTS 0x08
++#define OP_OUTD 0x09
++#define OP_OUTQ 0x0A
++#define OP_INS 0x0C
++#define OP_INS0 0x0D
++#define OP_IND 0x0E
++#define OP_INQ 0x0F
++#define OP_OS2IS 0x10
++#define OP_OS2ID 0x11
++#define OP_OS2IQ 0x12
++#define OP_OD2IS 0x13
++#define OP_OD2ID 0x14
++#define OP_OD2IQ 0x15
++#define OP_OQ2IS 0x16
++#define OP_OQ2ID 0x17
++#define OP_OQ2IQ 0x18
++#define OP_OSNIS 0x19
++#define OP_ODNID 0x1A
++
++#define MATRIX_MODE_AUTO 1
++#define CONF_MTX_MODE_AUTO 0
++#define MANUALEN_AUTO 0
++#define MATRIX_MODE_MANUAL 0
++#define CONF_MTX_MODE_MANUAL 9
++#define MANUALEN_MANUAL 1
++
++#define _ENSPI_MAX_XFER 0x1ff
++
++#define REG(x) (iobase + x)
++
++
++static void __iomem *iobase;
++
++
++static void opfifo_write(u32 cmd, u32 len)
++{
++ u32 tmp = ((cmd & 0x1f) << 9) | (len & 0x1ff);
++
++ writel(tmp, REG(ENSPI_MANUAL_OPFIFO_WDATA));
++
++ /* Wait for room in OPFIFO */
++ while (readl(REG(ENSPI_MANUAL_OPFIFO_FULL)))
++ ;
++
++ /* Shift command into OPFIFO */
++ writel(1, REG(ENSPI_MANUAL_OPFIFO_WR));
++
++ /* Wait for command to finish */
++ while (!readl(REG(ENSPI_MANUAL_OPFIFO_EMPTY)))
++ ;
++}
++
++static void set_cs(int state)
++{
++ if (state)
++ opfifo_write(OP_CSH, 1);
++ else
++ opfifo_write(OP_CSL, 1);
++}
++
++static void manual_begin_cmd(void)
++{
++ /* Disable read idle state */
++ writel(0, REG(ENSPI_READ_IDLE_EN));
++
++ /* Wait for FSM to reach idle state */
++ while (readl(REG(ENSPI_RDCTL_FSM)))
++ ;
++
++ /* Set SPI core to manual mode */
++ writel(CONF_MTX_MODE_MANUAL, REG(ENSPI_MTX_MODE_TOG));
++ writel(MANUALEN_MANUAL, REG(ENSPI_MANUAL_EN));
++}
++
++static void manual_end_cmd(void)
++{
++ /* Set SPI core to auto mode */
++ writel(CONF_MTX_MODE_AUTO, REG(ENSPI_MTX_MODE_TOG));
++ writel(MANUALEN_AUTO, REG(ENSPI_MANUAL_EN));
++
++ /* Enable read idle state */
++ writel(1, REG(ENSPI_READ_IDLE_EN));
++}
++
++static void dfifo_read(u8 *buf, int len)
++{
++ int i;
++
++ for (i = 0; i < len; i++) {
++ /* Wait for requested data to show up in DFIFO */
++ while (readl(REG(ENSPI_MANUAL_DFIFO_EMPTY)))
++ ;
++ buf[i] = readl(REG(ENSPI_MANUAL_DFIFO_RDATA));
++ /* Queue up next byte */
++ writel(1, REG(ENSPI_MANUAL_DFIFO_RD));
++ }
++}
++
++static void dfifo_write(const u8 *buf, int len)
++{
++ int i;
++
++ for (i = 0; i < len; i++) {
++ /* Wait for room in DFIFO */
++ while (readl(REG(ENSPI_MANUAL_DFIFO_FULL)))
++ ;
++ writel(buf[i], REG(ENSPI_MANUAL_DFIFO_WDATA));
++ }
++}
++
++static void set_spi_clock_speed(int freq_mhz)
++{
++ u32 tmp, val;
++
++ tmp = readl(ENSPI_CLOCK_DIVIDER);
++ tmp &= 0xffff0000;
++ writel(tmp, ENSPI_CLOCK_DIVIDER);
++
++ val = (400 / (freq_mhz * 2));
++ tmp |= (val << 8) | 1;
++ writel(tmp, ENSPI_CLOCK_DIVIDER);
++}
++
++static void init_hw(void)
++{
++ /* Disable manual/auto mode clash interrupt */
++ writel(0, REG(ENSPI_IER));
++
++ // TODO via clk framework
++ // set_spi_clock_speed(50);
++
++ /* Disable DMA */
++ writel(0, REG(ENSPI_NFI2SPI_EN));
++}
++
++static int xfer_read(struct spi_transfer *xfer)
++{
++ int opcode;
++ uint8_t *buf = xfer->rx_buf;
++
++ switch (xfer->rx_nbits) {
++ case SPI_NBITS_SINGLE:
++ opcode = OP_INS;
++ break;
++ case SPI_NBITS_DUAL:
++ opcode = OP_IND;
++ break;
++ case SPI_NBITS_QUAD:
++ opcode = OP_INQ;
++ break;
++ }
++
++ opfifo_write(opcode, xfer->len);
++ dfifo_read(buf, xfer->len);
++
++ return xfer->len;
++}
++
++static int xfer_write(struct spi_transfer *xfer, int next_xfer_is_rx)
++{
++ int opcode;
++ const uint8_t *buf = xfer->tx_buf;
++
++ if (next_xfer_is_rx) {
++ /* need to use Ox2Ix opcode to set the core to input afterwards */
++ switch (xfer->tx_nbits) {
++ case SPI_NBITS_SINGLE:
++ opcode = OP_OS2IS;
++ break;
++ case SPI_NBITS_DUAL:
++ opcode = OP_OS2ID;
++ break;
++ case SPI_NBITS_QUAD:
++ opcode = OP_OS2IQ;
++ break;
++ }
++ } else {
++ switch (xfer->tx_nbits) {
++ case SPI_NBITS_SINGLE:
++ opcode = OP_OUTS;
++ break;
++ case SPI_NBITS_DUAL:
++ opcode = OP_OUTD;
++ break;
++ case SPI_NBITS_QUAD:
++ opcode = OP_OUTQ;
++ break;
++ }
++ }
++
++ opfifo_write(opcode, xfer->len);
++ dfifo_write(buf, xfer->len);
++
++ return xfer->len;
++}
++
++size_t max_transfer_size(struct spi_device *spi)
++{
++ return _ENSPI_MAX_XFER;
++}
++
++int transfer_one_message(struct spi_controller *ctrl, struct spi_message *msg)
++{
++ struct spi_transfer *xfer;
++ int next_xfer_is_rx = 0;
++
++ manual_begin_cmd();
++ set_cs(0);
++ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++ if (xfer->tx_buf) {
++ if (!list_is_last(&xfer->transfer_list, &msg->transfers)
++ && list_next_entry(xfer, transfer_list)->rx_buf != NULL)
++ next_xfer_is_rx = 1;
++ else
++ next_xfer_is_rx = 0;
++ msg->actual_length += xfer_write(xfer, next_xfer_is_rx);
++ } else if (xfer->rx_buf) {
++ msg->actual_length += xfer_read(xfer);
++ }
++ }
++ set_cs(1);
++ manual_end_cmd();
++
++ msg->status = 0;
++ spi_finalize_current_message(ctrl);
++
++ return 0;
++}
++
++static int spi_probe(struct platform_device *pdev)
++{
++ struct spi_controller *ctrl;
++ int err;
++
++ ctrl = devm_spi_alloc_master(&pdev->dev, 0);
++ if (!ctrl) {
++ dev_err(&pdev->dev, "Error allocating SPI controller\n");
++ return -ENOMEM;
++ }
++
++ iobase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
++ if (IS_ERR(iobase)) {
++ dev_err(&pdev->dev, "Could not map SPI register address");
++ return -ENOMEM;
++ }
++
++ init_hw();
++
++ ctrl->dev.of_node = pdev->dev.of_node;
++ ctrl->flags = SPI_CONTROLLER_HALF_DUPLEX;
++ ctrl->mode_bits = SPI_RX_DUAL | SPI_TX_DUAL;
++ ctrl->max_transfer_size = max_transfer_size;
++ ctrl->transfer_one_message = transfer_one_message;
++ err = devm_spi_register_controller(&pdev->dev, ctrl);
++ if (err) {
++ dev_err(&pdev->dev, "Could not register SPI controller\n");
++ return -ENODEV;
++ }
++
++ return 0;
++}
++
++static const struct of_device_id spi_of_ids[] = {
++ { .compatible = "airoha,en7523-spi" },
++ { /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, spi_of_ids);
++
++static struct platform_driver spi_driver = {
++ .probe = spi_probe,
++ .driver = {
++ .name = "airoha-en7523-spi",
++ .of_match_table = spi_of_ids,
++ },
++};
++
++module_platform_driver(spi_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
++MODULE_DESCRIPTION("Airoha EN7523 SPI driver");
diff --git a/target/linux/airoha/patches-5.15/0006-PCI-mediatek-Allow-building-for-ARCH_AIROHA.patch b/target/linux/airoha/patches-5.15/0006-PCI-mediatek-Allow-building-for-ARCH_AIROHA.patch
new file mode 100644
index 0000000000..9f51f281bc
--- /dev/null
+++ b/target/linux/airoha/patches-5.15/0006-PCI-mediatek-Allow-building-for-ARCH_AIROHA.patch
@@ -0,0 +1,35 @@
+From b3b76fc86f0fb4d98918f48c784138bfa950dff6 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 15 Jun 2022 14:53:34 +0200
+Subject: [PATCH] PCI: mediatek: Allow building for ARCH_AIROHA
+
+Allow selecting the pcie-mediatek driver if ARCH_AIROHA is set, because the
+Airoha EN7523 SoC uses the same controller as MT7622.
+
+The driver itself is not modified. The PCIe controller DT node should use
+mediatek,mt7622-pcie after airoha,en7523-pcie.
+
+Link: https://lore.kernel.org/r/20220615125335.96089-2-nbd@nbd.name
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
+---
+ drivers/pci/controller/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
+index b8d96d38064d..2f6806dc2a20 100644
+--- a/drivers/pci/controller/Kconfig
++++ b/drivers/pci/controller/Kconfig
+@@ -237,7 +237,7 @@ config PCIE_ROCKCHIP_EP
+
+ config PCIE_MEDIATEK
+ tristate "MediaTek PCIe controller"
+- depends on ARCH_MEDIATEK || COMPILE_TEST
++ depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
+--
+2.35.1
diff --git a/target/linux/generic/pending-5.15/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch b/target/linux/generic/pending-5.15/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch
new file mode 100644
index 0000000000..a48e02fc08
--- /dev/null
+++ b/target/linux/generic/pending-5.15/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch
@@ -0,0 +1,137 @@
+diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
+index 9c64d9fc..5f99ea72 100644
+--- a/drivers/mtd/nand/spi/Makefile
++++ b/drivers/mtd/nand/spi/Makefile
+@@ -1,3 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0
+-spinand-objs := core.o esmt.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
++spinand-objs := core.o esmt.o etron.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
+ obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
+diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
+index 9839ee44..9ab44217 100644
+--- a/drivers/mtd/nand/spi/core.c
++++ b/drivers/mtd/nand/spi/core.c
+@@ -898,6 +898,7 @@ static const struct nand_ops spinand_ops = {
+ static const struct spinand_manufacturer *spinand_manufacturers[] = {
+ &esmt_c8_spinand_manufacturer,
+ &gigadevice_spinand_manufacturer,
++ &etron_spinand_manufacturer,
+ &macronix_spinand_manufacturer,
+ &micron_spinand_manufacturer,
+ &paragon_spinand_manufacturer,
+diff --git a/drivers/mtd/nand/spi/etron.c b/drivers/mtd/nand/spi/etron.c
+new file mode 100644
+index 00000000..653092be
+--- /dev/null
++++ b/drivers/mtd/nand/spi/etron.c
+@@ -0,0 +1,98 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++#define SPINAND_MFR_ETRON 0xd5
++
++
++static SPINAND_OP_VARIANTS(read_cache_variants,
++ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
++ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
++ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
++ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
++ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
++ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
++
++static SPINAND_OP_VARIANTS(write_cache_variants,
++ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
++ SPINAND_PROG_LOAD(true, 0, NULL, 0));
++
++static SPINAND_OP_VARIANTS(update_cache_variants,
++ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
++ SPINAND_PROG_LOAD(false, 0, NULL, 0));
++
++static int etron_ooblayout_ecc(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobregion)
++{
++ if (section)
++ return -ERANGE;
++
++ oobregion->offset = 72;
++ oobregion->length = 56;
++
++ return 0;
++}
++
++static int etron_ooblayout_free(struct mtd_info *mtd, int section,
++ struct mtd_oob_region *oobregion)
++{
++ if (section)
++ return -ERANGE;
++
++ oobregion->offset = 1;
++ oobregion->length = 71;
++
++ return 0;
++}
++
++static int etron_ecc_get_status(struct spinand_device *spinand, u8 status)
++{
++ switch (status & STATUS_ECC_MASK) {
++ case STATUS_ECC_NO_BITFLIPS:
++ return 0;
++
++ case STATUS_ECC_HAS_BITFLIPS:
++ /* Between 1-7 bitflips were corrected */
++ return 7;
++
++ case STATUS_ECC_MASK:
++ /* Maximum bitflips were corrected */
++ return 8;
++
++ case STATUS_ECC_UNCOR_ERROR:
++ return -EBADMSG;
++ }
++
++ return -EINVAL;
++}
++
++static const struct mtd_ooblayout_ops etron_ooblayout = {
++ .ecc = etron_ooblayout_ecc,
++ .free = etron_ooblayout_free,
++};
++
++static const struct spinand_info etron_spinand_table[] = {
++ SPINAND_INFO("EM73D044VCx",
++ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x1f),
++ // bpc, pagesize, oobsize, pagesperblock, bperlun, maxbadplun, ppl, lpt, #t
++ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
++ NAND_ECCREQ(8, 512),
++ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++ &write_cache_variants,
++ &update_cache_variants),
++ SPINAND_HAS_QE_BIT,
++ SPINAND_ECCINFO(&etron_ooblayout, etron_ecc_get_status)),
++};
++
++static const struct spinand_manufacturer_ops etron_spinand_manuf_ops = {
++};
++
++const struct spinand_manufacturer etron_spinand_manufacturer = {
++ .id = SPINAND_MFR_ETRON,
++ .name = "Etron",
++ .chips = etron_spinand_table,
++ .nchips = ARRAY_SIZE(etron_spinand_table),
++ .ops = &etron_spinand_manuf_ops,
++};
+diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
+index 2066962d..11d38d2f 100644
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -261,6 +261,7 @@ struct spinand_manufacturer {
+
+ /* SPI NAND manufacturers */
+ extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
++extern const struct spinand_manufacturer etron_spinand_manufacturer;
+ extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
+ extern const struct spinand_manufacturer macronix_spinand_manufacturer;
+ extern const struct spinand_manufacturer micron_spinand_manufacturer;