diff options
author | David Bauer <mail@david-bauer.net> | 2022-08-29 14:30:01 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2022-09-06 02:55:05 +0200 |
commit | e16a0e7e8876df0a92ec4779fe766de1a943307a (patch) | |
tree | 16b19514d5cb16150e889747e78649059553f799 /target | |
parent | 02f81494bb5c05ffc16025198792f99bdeac8a77 (diff) | |
download | upstream-e16a0e7e8876df0a92ec4779fe766de1a943307a.tar.gz upstream-e16a0e7e8876df0a92ec4779fe766de1a943307a.tar.bz2 upstream-e16a0e7e8876df0a92ec4779fe766de1a943307a.zip |
ipq40xx: add support for Extreme Networks WS-AP3915i
Hardware
--------
Qualcomm IPQ4029 WiSoC
2T2R 802.11 abgn
2T2R 802.11 nac
Macronix MX25L25635E SPI-NOR (32M)
512M DDR3 RAM
1x Gigabit LAN
1x Cisco RJ-45 Console port
Settings: 115200 8N1
Installation
------------
1. Attach to the Console port. Power up the device and press the s key
to interrupt autoboot.
2. The default username / password to the bootloader is admin / new2day
3. Update the bootcommand to allow loading OpenWrt.
$ setenv ramboot_openwrt "setenv serverip 192.168.1.66;
setenv ipaddr 192.168.1.1; tftpboot 0x86000000 openwrt-3915.bin;
bootm"
$ setenv boot_openwrt "sf probe;
sf read 0x88000000 0x280000 0xc00000; bootm 0x88000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
4. Download the OpenWrt initramfs image. Serve it using a TFTP server as
"openwrt-3915.bin" at 192.1681.66.
5. Download & boot the OpenWrt initramfs image on the access point.
$ run ramboot_openwrt
6. Wait for OpenWrt to start.
7. Download and transfer the sysupgrade image to the device using e.g.
SCP.
8. Install OpenWrt to the device using "sysupgrade"
$ sysupgrade -n /path/to/openwrt.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target')
5 files changed, 296 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 5843987627..a468c62b3c 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -28,6 +28,7 @@ ipq40xx_setup_interfaces() dlink,dap-2610 |\ engenius,eap1300|\ engenius,emd1|\ + extreme-networks,ws-ap3915i|\ meraki,mr33|\ meraki,mr74|\ mikrotik,lhgg-60ad|\ diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index f1c424a28d..b488bf5ddb 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -104,6 +104,10 @@ case "$FIRMWARE" in caldata_extract "ART" 0x1000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2) ;; + extreme-networks,ws-ap3915i) + caldata_extract "ART" 0x1000 0x2f20 + ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0) + ;; linksys,ea8300 |\ linksys,mr8300) caldata_extract "ART" 0x1000 0x2f20 @@ -186,6 +190,10 @@ case "$FIRMWARE" in caldata_extract "ART" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3) ;; + extreme-networks,ws-ap3915i) + caldata_extract "ART" 0x5000 0x2f20 + ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1) + ;; linksys,ea8300 |\ linksys,mr8300) caldata_extract "ART" 0x5000 0x2f20 diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh index ba1c196398..940af0528d 100644 --- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh +++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh @@ -15,6 +15,9 @@ preinit_set_mac_address() { base_mac=$(cat /sys/class/net/eth0/address) ip link set dev eth1 address $(macaddr_add "$base_mac" 1) ;; + extreme-networks,ws-ap3915i) + ip link set dev eth0 address $(mtd_get_mac_ascii CFG1 ethaddr) + ;; linksys,ea8300|\ linksys,mr8300) base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts new file mode 100644 index 0000000000..c14023559b --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/soc/qcom,tcsr.h> + +/ { + model = "Extreme Networks WS-AP3915i"; + compatible = "extreme-networks,ws-ap3915i"; + + aliases { + led-boot = &led_system_green; + led-failsafe = &led_system_amber; + led-running = &led_system_green; + led-upgrade = &led_system_amber; + label-mac-device = &gmac0; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = <TCSR_ESS_PSGMII>; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + switch_lan_bmp = <0x20>; + switch_wan_bmp = <0x00>; + }; + + edma@c080000 { + status = "okay"; + qcom,num_gmac = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_system_green: system_green { + label = "green:system"; + gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; + }; + + led_system_amber: system_amber { + label = "amber:system"; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + }; + + led_wlan24_green: wlan24_green { + label = "green:wlan24"; + gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_wlan24_amber: wlan24_amber { + label = "amber:wlan24"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + }; + + led_wlan5_green: wlan5_green { + label = "green:wlan5"; + gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led_wlan5_amber: wlan5_amber { + label = "amber:wlan5"; + gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; + }; + + iot { + label = "blue:iot"; + gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART >; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + serial_pins: serial_0_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* Layout for 0x0 - 0xe0000 unknown */ + + partition@e0000 { + label = "CFG1"; + reg = <0xe0000 0x10000>; + read-only; + }; + + partition@f0000 { + label = "BootBAK"; + reg = <0xf0000 0x70000>; + read-only; + }; + + partition@160000 { + label = "WINGCFG1"; + reg = <0x160000 0x10000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x170000 0x10000>; + read-only; + }; + + partition@180000 { + label = "BootPRI"; + reg = <0x180000 0x70000>; + read-only; + }; + + partition@1f0000 { + label = "WINGCFG2"; + reg = <0x1f0000 0x10000>; + read-only; + }; + + partition@200000 { + label = "FS"; + reg = <0x200000 0x80000>; + read-only; + }; + + partition@280000 { + label = "firmware"; + reg = <0x280000 0x1d60000>; + }; + + partition@1fe0000 { + label = "CFG2"; + reg = <0x1fe0000 0x10000>; + read-only; + }; + }; + }; +}; + +&gmac0 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x20>; +}; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 6daebd5ed0..e8f8fa27b9 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -519,6 +519,18 @@ define Device/engenius_ens620ext endef TARGET_DEVICES += engenius_ens620ext +define Device/extreme-networks_ws-ap3915i + $(call Device/FitImage) + DEVICE_VENDOR := Extreme Networks + DEVICE_MODEL := WS-AP3915i + IMAGE_SIZE := 30080k + SOC := qcom-ipq4029 + BLOCKSIZE := 128k + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata + DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i +endef +TARGET_DEVICES += extreme-networks_ws-ap3915i + define Device/ezviz_cs-w3-wd1200g-eup $(call Device/FitImage) DEVICE_VENDOR := EZVIZ |