ath79: remove 'fakeroot' for Senao devices

By using the same custom kernel header magic
in both OKLI lzma-loader, DTS, and makefile
this hack is not necessary anymore

However, "rootfs" size and checksum
must now be supplied by the factory.bin image
through a script that is accepted by the OEM upgrade script.

This is because Senao OEM scripts assume a squashfs header exists
at the offset for the original "rootfs" partition
which is actually the kernel + rootfs in this implementation,
and takes size value from the header that would be there with hexdump,
but this offset is now the uImage header instead.

This frees up 1 eraseblock
previously used by the "fakeroot" partition
for bypassing the OEM image verification.

Also, these Senao devices with a 'failsafe' partition
and the tar-gz factory.bin platform would otherwise require
flashing the new tar-gz sysupgrade.bin afterward.
So this also prevents having to flash both images
when starting from OEM or 'failsafe'

the OEM upgrade script verifies the header magic numbers,
but only the first two bytes.
Example:

    [ "${magic_word_kernel}" = "2705" ] &&
    [ "${magic_word_rootfs}" = "7371" -o "${magic_word_rootfs}" = "6873" ] &&
    errcode="0"

therefore picked the magic number
0x73714f4b
which is
'sqOK'

Signed-off-by: Michael Pratt <mcpratt@pm.me>

6 files changed, 38 insertions, 49 deletions

diff --git a/target/linux/ath79/dts/ar724x_senao_loader.dtsi b/target/linux/ath79/dts/ar724x_senao_loader.dtsi
index fdc2726e6f..54dbec18b3 100644
--- a/target/linux/ath79/dts/ar724x_senao_loader.dtsi
+++ b/target/linux/ath79/dts/ar724x_senao_loader.dtsi
@@ -15,7 +15,7 @@
 
 			partition@0 {
 				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,ih-magic = <0x73714f4b>;
 				label = "firmware";
 				reg = <0x0 0x0>;
 			};
@@ -64,15 +64,9 @@
 				reg = <0xb0000 0xf0000>;
 			};
 
-			partition@1a0000 {
-				label = "fakeroot";
-				reg = <0x1a0000 0x10000>;
-				read-only;
-			};
-
-			fwconcat0: partition@1b0000 {
+			fwconcat0: partition@1a0000 {
 				label = "fwconcat0";
-				reg = <0x1b0000 0x4c0000>;
+				reg = <0x1a0000 0x4d0000>;
 			};
 
 			partition@670000 {
diff --git a/target/linux/ath79/dts/ar934x_senao_loader.dtsi b/target/linux/ath79/dts/ar934x_senao_loader.dtsi
index aa8a36d242..35e5f13535 100644
--- a/target/linux/ath79/dts/ar934x_senao_loader.dtsi
+++ b/target/linux/ath79/dts/ar934x_senao_loader.dtsi
@@ -15,7 +15,7 @@
 
 			partition@0 {
 				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,ih-magic = <0x73714f4b>;
 				label = "firmware";
 				reg = <0x0 0x0>;
 			};
@@ -68,15 +68,9 @@
 				reg = <0x0b0000 0x170000>;
 			};
 
-			partition@220000 {
-				label = "fakeroot";
-				reg = <0x220000 0x010000>;
-				read-only;
-			};
-
-			fwconcat0: partition@230000 {
+			fwconcat0: partition@220000 {
 				label = "fwconcat0";
-				reg = <0x230000 0xbc0000>;
+				reg = <0x220000 0xbd0000>;
 			};
 
 			partition@df0000 {
diff --git a/target/linux/ath79/dts/qca955x_senao_loader.dtsi b/target/linux/ath79/dts/qca955x_senao_loader.dtsi
index 3f5fc0e938..77eabde80a 100644
--- a/target/linux/ath79/dts/qca955x_senao_loader.dtsi
+++ b/target/linux/ath79/dts/qca955x_senao_loader.dtsi
@@ -17,7 +17,7 @@
 
 			partition@0 {
 				compatible = "openwrt,uimage", "denx,uimage";
-				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,ih-magic = <0x73714f4b>;
 				label = "firmware";
 				reg = <0x0 0x0>;
 			};
@@ -66,15 +66,9 @@
 				reg = <0x0b0000 0x170000>;
 			};
 
-			partition@220000 {
-				label = "fakeroot";
-				reg = <0x220000 0x010000>;
-				read-only;
-			};
-
-			fwconcat0: partition@230000 {
+			fwconcat0: partition@220000 {
 				label = "fwconcat0";
-				reg = <0x230000 0xb40000>;
+				reg = <0x220000 0xb50000>;
 			};
 
 			partition@d70000 {
diff --git a/target/linux/ath79/image/common-senao.mk b/target/linux/ath79/image/common-senao.mk
index dd1a53c969..9b5903d8e7 100644
--- a/target/linux/ath79/image/common-senao.mk
+++ b/target/linux/ath79/image/common-senao.mk
@@ -3,30 +3,37 @@ DEVICE_VARS += SENAO_IMGNAME
 # This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
 # sysupgrade, as otherwise it will implant the old configuration from
 # OEM firmware when writing rootfs from factory.bin
+# rootfs size and checksum is taken from a squashfs header
+# the header does not exist, therefore, supply the size and md5
 define Build/senao-tar-gz
 	-[ -f "$@" ] && \
 	mkdir -p $@.tmp && \
 	touch $@.tmp/failsafe.bin && \
 	echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
 	echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
+	echo -n $$(( $$(cat $@ | wc -c) / 4096 * 4096 )) > $@.len && \
+	dd if=$@ bs=$$(cat $@.len) count=1 | md5sum - | cut -d ' ' -f 1 > $@.md5 && \
+	echo '#!/bin/sh' > $@.tmp/after-upgrade.sh && \
+	printf 'fw_setenv rootfs_size 0x%08x\n' $$(cat $@.len) >> $@.tmp/after-upgrade.sh && \
+	printf 'fw_setenv rootfs_checksum %s\n' $$(cat $@.md5) >> $@.tmp/after-upgrade.sh && \
 	$(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
 		$@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
 	$(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
 	$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
 		$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
 		-C $@.tmp . | gzip -9n > $@ && \
-	rm -rf $@.tmp
+	rm -rf $@.tmp $@.len $@.md5
 endef
 
 define Device/senao_loader_okli
-  KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
+  KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x73714f4b
+  LOADER_KERNEL_MAGIC := 0x73714f4b
   LOADER_TYPE := bin
   COMPILE := loader-$(1).bin loader-$(1).uImage
   COMPILE/loader-$(1).bin := loader-okli-compile
   COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
 	uImage lzma
   IMAGES += factory.bin
-  IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
-	append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
+  IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
 	check-size | senao-tar-gz $$$$(SENAO_IMGNAME)
 endef
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index f358d44064..bda47ce74d 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -994,8 +994,8 @@ define Device/engenius_eap1200h
   DEVICE_VENDOR := EnGenius
   DEVICE_MODEL := EAP1200H
   DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
-  IMAGE_SIZE := 11520k
-  LOADER_FLASH_OFFS := 0x230000
+  IMAGE_SIZE := 11584k
+  LOADER_FLASH_OFFS := 0x220000
   SENAO_IMGNAME := ar71xx-generic-eap1200h
 endef
 TARGET_DEVICES += engenius_eap1200h
@@ -1006,8 +1006,8 @@ define Device/engenius_eap300-v2
   DEVICE_VENDOR := EnGenius
   DEVICE_MODEL := EAP300
   DEVICE_VARIANT := v2
-  IMAGE_SIZE := 12032k
-  LOADER_FLASH_OFFS := 0x230000
+  IMAGE_SIZE := 12096k
+  LOADER_FLASH_OFFS := 0x220000
   SENAO_IMGNAME := senao-eap300v2
 endef
 TARGET_DEVICES += engenius_eap300-v2
@@ -1017,8 +1017,8 @@ define Device/engenius_eap600
   SOC := ar9344
   DEVICE_VENDOR := EnGenius
   DEVICE_MODEL := EAP600
-  IMAGE_SIZE := 12032k
-  LOADER_FLASH_OFFS := 0x230000
+  IMAGE_SIZE := 12096k
+  LOADER_FLASH_OFFS := 0x220000
   SENAO_IMGNAME := senao-eap600
 endef
 TARGET_DEVICES += engenius_eap600
@@ -1054,8 +1054,8 @@ define Device/engenius_ecb600
   SOC := ar9344
   DEVICE_VENDOR := EnGenius
   DEVICE_MODEL := ECB600
-  IMAGE_SIZE := 12032k
-  LOADER_FLASH_OFFS := 0x230000
+  IMAGE_SIZE := 12096k
+  LOADER_FLASH_OFFS := 0x220000
   SENAO_IMGNAME := senao-ecb600
 endef
 TARGET_DEVICES += engenius_ecb600
@@ -1067,8 +1067,8 @@ define Device/engenius_ens202ext-v1
   DEVICE_MODEL := ENS202EXT
   DEVICE_VARIANT := v1
   DEVICE_PACKAGES := rssileds
-  IMAGE_SIZE := 12032k
-  LOADER_FLASH_OFFS := 0x230000
+  IMAGE_SIZE := 12096k
+  LOADER_FLASH_OFFS := 0x220000
   SENAO_IMGNAME := senao-ens202ext
 endef
 TARGET_DEVICES += engenius_ens202ext-v1
@@ -1080,8 +1080,8 @@ define Device/engenius_enstationac-v1
   DEVICE_MODEL := EnStationAC
   DEVICE_VARIANT := v1
   DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct rssileds
-  IMAGE_SIZE := 11520k
-  LOADER_FLASH_OFFS := 0x230000
+  IMAGE_SIZE := 11584k
+  LOADER_FLASH_OFFS := 0x220000
   SENAO_IMGNAME := ar71xx-generic-enstationac
 endef
 TARGET_DEVICES += engenius_enstationac-v1
diff --git a/target/linux/ath79/image/tiny.mk b/target/linux/ath79/image/tiny.mk
index dec3cd368d..e9aab2ce06 100644
--- a/target/linux/ath79/image/tiny.mk
+++ b/target/linux/ath79/image/tiny.mk
@@ -37,8 +37,8 @@ define Device/engenius_eap350-v1
   DEVICE_VENDOR := EnGenius
   DEVICE_MODEL := EAP350
   DEVICE_VARIANT := v1
-  IMAGE_SIZE := 4864k
-  LOADER_FLASH_OFFS := 0x1b0000
+  IMAGE_SIZE := 4928k
+  LOADER_FLASH_OFFS := 0x1a0000
   SENAO_IMGNAME := senao-eap350
 endef
 TARGET_DEVICES += engenius_eap350-v1
@@ -49,8 +49,8 @@ define Device/engenius_ecb350-v1
   DEVICE_VENDOR := EnGenius
   DEVICE_MODEL := ECB350
   DEVICE_VARIANT := v1
-  IMAGE_SIZE := 4864k
-  LOADER_FLASH_OFFS := 0x1b0000
+  IMAGE_SIZE := 4928k
+  LOADER_FLASH_OFFS := 0x1a0000
   SENAO_IMGNAME := senao-ecb350
 endef
 TARGET_DEVICES += engenius_ecb350-v1
@@ -62,8 +62,8 @@ define Device/engenius_enh202-v1
   DEVICE_MODEL := ENH202
   DEVICE_VARIANT := v1
   DEVICE_PACKAGES := rssileds
-  IMAGE_SIZE := 4864k
-  LOADER_FLASH_OFFS := 0x1b0000
+  IMAGE_SIZE := 4928k
+  LOADER_FLASH_OFFS := 0x1a0000
   SENAO_IMGNAME := senao-enh202
 endef
 TARGET_DEVICES += engenius_enh202-v1