diff options
| author | Aleksander Jan Bajkowski <olek2@wp.pl> | 2023-03-12 10:59:21 +0100 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-03-19 17:11:09 +0100 |
| commit | a32def781f5a840697e503f1da29de455a875bbc (patch) | |
| tree | 69a9d6955e10cd05bd17eb98621a8c528b58317f /target | |
| parent | ab514c28a8ca3a07a3b9c85965f8ac60bb63ea0f (diff) | |
| download | upstream-a32def781f5a840697e503f1da29de455a875bbc.tar.gz upstream-a32def781f5a840697e503f1da29de455a875bbc.tar.bz2 upstream-a32def781f5a840697e503f1da29de455a875bbc.zip | |
lantiq: xway: add phy reset pin to AVM Fritz!Box 7320
This commit adds the PHY reset gpio for the LAN1 port to the dts.
According to the GPL sources, gpios 34 and 36 are used on the AVM
FritzBox 7320 and 7330. The second port is unsupported.
The gpio assignment has been verified on the FritzBox 7330.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts index 44b8a18dae..cd7b29ca6d 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts @@ -98,9 +98,20 @@ &gsw { phy-mode = "mii"; + phy-handle = <&phy0>; nvmem-cells = <&macaddr_ath9k_cal_a91>; nvmem-cell-names = "mac-address"; mac-address-increment = <(-2)>; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + }; }; &gpio { @@ -108,6 +119,12 @@ pinctrl-0 = <&state_default>; state_default: pinmux { + phy-rst { + lantiq,pins = "io36"; + lantiq,pull = <0>; + lantiq,open-drain; + lantiq,output = <1>; + }; usb0_vbus { lantiq,pins = "io50"; lantiq,pull = <0>; |