generic at803x: remove unneeded patches

- Remove the "RGMII TX delay fixup" hack and the associated
   DT-property. It was never used in a DT-based platform and
   solved a problem which can be mitigated by using correct
   delays on the MAC side.

 - Remove the patch to enable platform-data support for the
   at803x driver. It was only used by ar71xx which does not
   (and never will) support kernel 4.19 or later.

 - Remove the SmartEEE DT-configuration patch. As explained
   previously, this patch never disabled the Atheros SmartEEE
   implementation, but rather "standard" EEE. This can be done
   on device-tree compatible platforms by adding the
   "eee-broken-1000t" or "eee-broken-100tx" properties to the PHY
   node. As all usages of the old properties are migrated, this
   patch can be removed.

Signed-off-by: David Bauer <mail@david-bauer.net>
Acked-by: Christian Lamparter <chunkeey@gmail.com>

3 files changed, 0 insertions, 236 deletions

diff --git a/target/linux/generic/pending-4.14/736-net-phy-at803x-allow-to-configure-via-dt.patch b/target/linux/generic/pending-4.14/736-net-phy-at803x-allow-to-configure-via-dt.patch
deleted file mode 100644
index 6bc626dd6a..0000000000
--- a/target/linux/generic/pending-4.14/736-net-phy-at803x-allow-to-configure-via-dt.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -354,6 +354,14 @@ static int at803x_config_init(struct phy
- 				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
- 	}
- 
-+#ifdef CONFIG_OF_MDIO
-+	if (phydev->mdio.dev.of_node &&
-+		of_property_read_bool(phydev->mdio.dev.of_node,
-+				      "at803x-disable-smarteee")) {
-+		at803x_disable_smarteee(phydev);
-+	}
-+#endif
-+
- 	return 0;
- }
- 
-@@ -392,6 +400,7 @@ static void at803x_link_change_notify(st
- {
- 	struct at803x_priv *priv = phydev->priv;
- 	struct at803x_platform_data *pdata;
-+	u8 fixup_rgmii_tx_delay = 0;
- 	pdata = dev_get_platdata(&phydev->mdio.dev);
- 
- 	/*
-@@ -421,8 +430,19 @@ static void at803x_link_change_notify(st
- 	} else {
- 		priv->phy_reset = false;
- 	}
--	if (pdata && pdata->fixup_rgmii_tx_delay &&
--	    phydev->speed != priv->prev_speed) {
-+
-+	if (pdata && pdata->fixup_rgmii_tx_delay)
-+		fixup_rgmii_tx_delay = 1;
-+
-+#ifdef CONFIG_OF_MDIO
-+	if (phydev->mdio.dev.of_node &&
-+		of_property_read_bool(phydev->mdio.dev.of_node,
-+				      "at803x-fixup-rgmii-tx-delay")) {
-+			fixup_rgmii_tx_delay = 1;
-+	}
-+#endif
-+
-+	if (fixup_rgmii_tx_delay && phydev->speed != priv->prev_speed) {
- 		switch (phydev->speed) {
- 		case SPEED_10:
- 		case SPEED_100:
diff --git a/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch b/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch
deleted file mode 100644
index e56e77addf..0000000000
--- a/target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: net: phy: allow to configure AR803x PHYs via platform data
-
-Add a patch for the at803x phy driver, in order to be able
-to configure some register settings via platform data.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/at803x.c                 | 56 ++++++++++++++++++++++++++++++++
- include/linux/platform_data/phy-at803x.h | 11 +++++++
- 2 files changed, 67 insertions(+)
- create mode 100644 include/linux/platform_data/phy-at803x.h
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -12,12 +12,14 @@
-  */
- 
- #include <linux/phy.h>
-+#include <linux/mdio.h>
- #include <linux/module.h>
- #include <linux/string.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
- #include <linux/of_gpio.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/platform_data/phy-at803x.h>
- 
- #define AT803X_INTR_ENABLE			0x12
- #define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
-@@ -45,6 +47,11 @@
- #define AT803X_REG_CHIP_CONFIG			0x1f
- #define AT803X_BT_BX_REG_SEL			0x8000
- 
-+#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
-+#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
-+
- #define AT803X_DEBUG_ADDR			0x1D
- #define AT803X_DEBUG_DATA			0x1E
- 
-@@ -73,6 +80,7 @@ MODULE_LICENSE("GPL");
- 
- struct at803x_priv {
- 	bool phy_reset:1;
-+	int prev_speed;
- };
- 
- struct at803x_context {
-@@ -249,8 +257,16 @@ static int at803x_probe(struct phy_devic
- 	return 0;
- }
- 
-+static void at803x_disable_smarteee(struct phy_device *phydev)
-+{
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
-+		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
-+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-+}
-+
- static int at803x_config_init(struct phy_device *phydev)
- {
-+	struct at803x_platform_data *pdata;
- 	int ret;
- 
- 	ret = genphy_config_init(phydev);
-@@ -271,6 +287,26 @@ static int at803x_config_init(struct phy
- 			return ret;
- 	}
- 
-+	pdata = dev_get_platdata(&phydev->mdio.dev);
-+	if (pdata) {
-+		if (pdata->disable_smarteee)
-+			at803x_disable_smarteee(phydev);
-+
-+		if (pdata->enable_rgmii_rx_delay)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
-+				AT803X_DEBUG_RX_CLK_DLY_EN);
-+		else
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+				AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-+
-+		if (pdata->enable_rgmii_tx_delay)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-+				AT803X_DEBUG_TX_CLK_DLY_EN);
-+		else
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+	}
-+
- 	return 0;
- }
- 
-@@ -308,6 +344,8 @@ static int at803x_config_intr(struct phy
- static void at803x_link_change_notify(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-+	struct at803x_platform_data *pdata;
-+	pdata = dev_get_platdata(&phydev->mdio.dev);
- 
- 	/*
- 	 * Conduct a hardware reset for AT8030/2 every time a link loss is
-@@ -336,6 +374,24 @@ static void at803x_link_change_notify(st
- 	} else {
- 		priv->phy_reset = false;
- 	}
-+	if (pdata && pdata->fixup_rgmii_tx_delay &&
-+	    phydev->speed != priv->prev_speed) {
-+		switch (phydev->speed) {
-+		case SPEED_10:
-+		case SPEED_100:
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-+				AT803X_DEBUG_TX_CLK_DLY_EN);
-+			break;
-+		case SPEED_1000:
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		priv->prev_speed = phydev->speed;
-+	}
- }
- 
- static int at803x_aneg_done(struct phy_device *phydev)
---- /dev/null
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -0,0 +1,11 @@
-+#ifndef _PHY_AT803X_PDATA_H
-+#define _PHY_AT803X_PDATA_H
-+
-+struct at803x_platform_data {
-+	int disable_smarteee:1;
-+	int enable_rgmii_tx_delay:1;
-+	int enable_rgmii_rx_delay:1;
-+	int fixup_rgmii_tx_delay:1;
-+};
-+
-+#endif /* _PHY_AT803X_PDATA_H */
diff --git a/target/linux/generic/pending-4.19/736-net-phy-at803x-allow-to-configure-via-dt.patch b/target/linux/generic/pending-4.19/736-net-phy-at803x-allow-to-configure-via-dt.patch
deleted file mode 100644
index 496700f377..0000000000
--- a/target/linux/generic/pending-4.19/736-net-phy-at803x-allow-to-configure-via-dt.patch
+++ /dev/null
@@ -1,47 +0,0 @@
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -329,6 +329,14 @@ static int at803x_config_init(struct phy
- 				AT803X_DEBUG_TX_CLK_DLY_EN, 0);
- 	}
- 
-+#ifdef CONFIG_OF_MDIO
-+	if (phydev->mdio.dev.of_node &&
-+		of_property_read_bool(phydev->mdio.dev.of_node,
-+				      "at803x-disable-smarteee")) {
-+		at803x_disable_smarteee(phydev);
-+	}
-+#endif
-+
- 	return 0;
- }
- 
-@@ -367,6 +375,7 @@ static void at803x_link_change_notify(st
- {
- 	struct at803x_priv *priv = phydev->priv;
- 	struct at803x_platform_data *pdata;
-+	u8 fixup_rgmii_tx_delay = 0;
- 	pdata = dev_get_platdata(&phydev->mdio.dev);
- 
- 	/*
-@@ -396,8 +405,19 @@ static void at803x_link_change_notify(st
- 	} else {
- 		priv->phy_reset = false;
- 	}
--	if (pdata && pdata->fixup_rgmii_tx_delay &&
--	    phydev->speed != priv->prev_speed) {
-+
-+	if (pdata && pdata->fixup_rgmii_tx_delay)
-+		fixup_rgmii_tx_delay = 1;
-+
-+#ifdef CONFIG_OF_MDIO
-+	if (phydev->mdio.dev.of_node &&
-+		of_property_read_bool(phydev->mdio.dev.of_node,
-+				      "at803x-fixup-rgmii-tx-delay")) {
-+			fixup_rgmii_tx_delay = 1;
-+	}
-+#endif
-+
-+	if (fixup_rgmii_tx_delay && phydev->speed != priv->prev_speed) {
- 		switch (phydev->speed) {
- 		case SPEED_10:
- 		case SPEED_100: