ipq806x: add fab scaling support

Add fab scaling support and dtsi definition

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

2 files changed, 252 insertions, 0 deletions

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 1cf105d81e..f95b0b4f95 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -546,6 +546,15 @@
 		};
 	};
 
+	fab-scaling {
+		compatible = "qcom,fab-scaling";
+		clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
+		clock-names = "apps-fab-clk", "ddr-fab-clk";
+		fab_freq_high = <533000000>;
+		fab_freq_nominal = <400000000>;
+		cpu_freq_threshold = <1000000000>;
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq806x";
diff --git a/target/linux/ipq806x/patches-4.19/0057-add-fab-scaling-support-with-cpufreq.patch b/target/linux/ipq806x/patches-4.19/0057-add-fab-scaling-support-with-cpufreq.patch
new file mode 100644
index 0000000000..fa02f49526
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.19/0057-add-fab-scaling-support-with-cpufreq.patch
@@ -0,0 +1,243 @@
+--- a/drivers/clk/qcom/Makefile
++++ b/drivers/clk/qcom/Makefile
+@@ -15,6 +15,7 @@ clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-k
+ clk-qcom-y += clk-hfpll.o
+ clk-qcom-y += reset.o
+ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
++clk-qcom-y += fab_scaling.o
+ 
+ # Keep alphabetically sorted by config
+ obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
+--- /dev/null
++++ b/drivers/clk/qcom/fab_scaling.c
+@@ -0,0 +1,172 @@
++/*
++ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/clk.h>
++#include <linux/clk-provider.h>
++#include <linux/slab.h>
++#include <linux/fab_scaling.h>
++
++struct qcom_fab_scaling_data {
++	u32 fab_freq_high;
++	u32 fab_freq_nominal;
++	u32 cpu_freq_threshold;
++	struct clk *apps_fab_clk;
++	struct clk *ddr_fab_clk;
++};
++
++static struct qcom_fab_scaling_data *drv_data;
++
++int scale_fabrics(unsigned long max_cpu_freq)
++{	
++	struct clk *apps_fab_clk = drv_data->apps_fab_clk,
++	           *ddr_fab_clk = drv_data->ddr_fab_clk;
++	unsigned long target_freq, cur_freq;
++	int ret;
++
++	/* Skip fab scaling if the driver is not ready */
++	if (!apps_fab_clk || !ddr_fab_clk)
++		return 0;
++
++	if (max_cpu_freq > drv_data->cpu_freq_threshold)
++		target_freq = drv_data->fab_freq_high;
++	else
++		target_freq = drv_data->fab_freq_nominal;
++
++	cur_freq = clk_get_rate(ddr_fab_clk);
++
++	if (target_freq != cur_freq) {
++		ret = clk_set_rate(apps_fab_clk, target_freq);
++		if (ret)
++			return ret;
++		ret = clk_set_rate(ddr_fab_clk, target_freq);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(scale_fabrics);
++
++static int ipq806x_fab_scaling_probe(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	struct clk *apps_fab_clk, *ddr_fab_clk;
++	int ret;
++
++	if (!np)
++		return -ENODEV;
++	
++	drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
++	if (!drv_data)
++		return -ENOMEM;
++
++	if (of_property_read_u32(np, "fab_freq_high", &drv_data->fab_freq_high)) {
++		pr_err("FABRICS turbo freq not found. Using defaults...\n");
++		drv_data->fab_freq_high = 533000000;
++	}
++
++	if (of_property_read_u32(np, "fab_freq_nominal", &drv_data->fab_freq_nominal)) {
++		pr_err("FABRICS nominal freq not found. Using defaults...\n");
++		drv_data->fab_freq_nominal = 400000000;
++	}
++
++	if (of_property_read_u32(np, "cpu_freq_threshold", &drv_data->cpu_freq_threshold)) {
++		pr_err("FABRICS cpu freq threshold not found. Using defaults...\n");
++		drv_data->cpu_freq_threshold = 1000000000;
++	}
++
++	drv_data->apps_fab_clk = devm_clk_get(&pdev->dev, "apps-fab-clk");
++	apps_fab_clk = drv_data->apps_fab_clk;
++	ret = PTR_ERR_OR_ZERO(apps_fab_clk);
++	if (ret) {
++		/*
++		 * If apps fab clk node is present, but clock is not yet
++		 * registered, we should try defering probe.
++		 */
++		if (ret != -EPROBE_DEFER) {
++			pr_err("Failed to get APPS FABRIC clock: %d\n", ret);
++			ret = -ENODEV;
++		}
++		goto err;
++	}
++
++	clk_set_rate(apps_fab_clk, drv_data->fab_freq_high);
++	clk_prepare_enable(apps_fab_clk);
++
++	drv_data->ddr_fab_clk = devm_clk_get(&pdev->dev, "ddr-fab-clk");
++	ddr_fab_clk = drv_data->ddr_fab_clk;
++	ret = PTR_ERR_OR_ZERO(ddr_fab_clk);
++	if (ret) {
++		/*
++		 * If ddr fab clk node is present, but clock is not yet
++		 * registered, we should try defering probe.
++		 */
++		if (ret != -EPROBE_DEFER) {
++			pr_err("Failed to get DDR FABRIC clock: %d\n", ret);
++			ddr_fab_clk = NULL;
++			ret = -ENODEV;
++		}
++		goto err;
++	}
++
++	clk_set_rate(ddr_fab_clk, drv_data->fab_freq_high);
++	clk_prepare_enable(ddr_fab_clk);
++
++	return 0;
++err:
++	kfree(drv_data);
++	return ret;
++}
++
++static int ipq806x_fab_scaling_remove(struct platform_device *pdev)
++{
++	kfree(drv_data);
++	return 0;
++}
++
++static const struct of_device_id fab_scaling_ipq806x_match_table[] = {
++	{ .compatible = "qcom,fab-scaling" },
++	{ }
++};
++
++static struct platform_driver fab_scaling_ipq806x_driver = {
++	.probe		= ipq806x_fab_scaling_probe,
++	.remove		= ipq806x_fab_scaling_remove,
++	.driver		= {
++		.name   = "fab-scaling",
++		.of_match_table = fab_scaling_ipq806x_match_table,
++	},
++};
++
++static int __init fab_scaling_ipq806x_init(void)
++{
++	return platform_driver_register(&fab_scaling_ipq806x_driver);
++}
++late_initcall(fab_scaling_ipq806x_init);
++
++static void __exit fab_scaling_ipq806x_exit(void)
++{
++	platform_driver_unregister(&fab_scaling_ipq806x_driver);
++}
++module_exit(fab_scaling_ipq806x_exit);
+--- /dev/null
++++ b/include/linux/fab_scaling.h
+@@ -0,0 +1,31 @@
++/*
++ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++
++#ifndef __FAB_SCALING_H
++#define __FAB_SCALING_H
++
++/**
++ * scale_fabrics - Scale DDR and APPS FABRICS
++ *
++ * This function monitors all the registered clocks and does APPS
++ * and DDR FABRIC scaling based on the idle frequencies with which
++ * it was registered.
++ *
++ */
++int scale_fabrics(unsigned long max_cpu_freq);
++
++#endif
+--- a/drivers/cpufreq/cpufreq-dt.c
++++ b/drivers/cpufreq/cpufreq-dt.c
+@@ -24,6 +24,7 @@
+ #include <linux/regulator/consumer.h>
+ #include <linux/slab.h>
+ #include <linux/thermal.h>
++#include <linux/fab_scaling.h>
+ 
+ #include "cpufreq-dt.h"
+ 
+@@ -101,6 +102,13 @@ static int set_target(struct cpufreq_pol
+ 					}
+ 				}
+ 			}
++
++			/*
++			 * Scale fabrics with max freq across all cores
++			 */
++			ret = scale_fabrics(target_freq);
++			if (ret)
++				goto exit;
+ 		}
+ 		priv->opp_freq = freq * 1000;
+ 		arch_set_freq_scale(policy->related_cpus, freq,