diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2019-11-12 01:26:44 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-12-13 15:37:37 +0100 |
| commit | 0375c076b67cda9dc1b758b87ab1b79fd2403d94 (patch) | |
| tree | 7ff5091a44f06edd3d398831c1718ec34e6edc38 /target | |
| parent | 69fff339e965d508b4fc12ffdc2a170efe9c98b1 (diff) | |
| download | upstream-0375c076b67cda9dc1b758b87ab1b79fd2403d94.tar.gz upstream-0375c076b67cda9dc1b758b87ab1b79fd2403d94.tar.bz2 upstream-0375c076b67cda9dc1b758b87ab1b79fd2403d94.zip | |
ramips: add support for ZIO FREEZIO
ZIO FREEZIO is a 2.4/5GHz band AC1200 router, based on MediaTek MT7621A.
Specifications:
- SoC: MT7621AT
- RAM: DDR3 128MB
- Flash: SPI NOR 16MB
- WiFi:
- 2.4GHz: MT7603EN
- 5GHz: MT7612EN
- Ethernet: 5x 10/100/1000Mbps
- Switch: SoC internal
- USB: 1x 3.0
- UART:
- J4: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1
Notes:
- FREEZIO has almost the same board as WeVO W2914NS v2.
- Stock firmware is based on OpenWrt BB.
MAC addresses in factory partition:
0x0004: WiFi 2.4GHz (label_mac-8)
0x002e: WAN (label_mac)
0x8004: WiFi 5GHz (label_mac-4)
0xe000: LAN (label_mac+1)
Installation via web interface:
1. Access web admin page and turn on "OpenWrt UI mode".
2. Flash sysupgrade image through LuCI, with the "Keep settings" option
OFF.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Make sure to NOT preserve settings.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rebase, use mt7621_wevo_w2914ns-v2.dtsi]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/ramips/dts/mt7621_zio_freezio.dts | 20 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 9 | ||||
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 6 |
3 files changed, 33 insertions, 2 deletions
diff --git a/target/linux/ramips/dts/mt7621_zio_freezio.dts b/target/linux/ramips/dts/mt7621_zio_freezio.dts new file mode 100644 index 0000000000..dce1c4bd4d --- /dev/null +++ b/target/linux/ramips/dts/mt7621_zio_freezio.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7621_wevo_w2914ns-v2.dtsi" + +/ { + compatible = "zio,freezio", "mediatek,mt7621-soc"; + model = "ZIO FREEZIO"; + + leds { + compatible = "gpio-leds"; + + usb { + label = "freezio:green:usb"; + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index d663aa29da..0b2b74800a 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -910,3 +910,12 @@ define Device/zbtlink_zbt-wg3526-32m SUPPORTED_DEVICES += ac1200pro zbt-wg3526-32M endef TARGET_DEVICES += zbtlink_zbt-wg3526-32m + +define Device/zio_freezio + MTK_SOC := mt7621 + IMAGE_SIZE := 16064k + DEVICE_VENDOR := ZIO + DEVICE_MODEL := FREEZIO + DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic +endef +TARGET_DEVICES += zio_freezio diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 2447ff8a8d..c9e3cbb984 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -45,7 +45,8 @@ ramips_setup_interfaces() netgear,wndr3700-v5|\ netis,wf-2881|\ wevo,11acnas|\ - wevo,w2914ns-v2) + wevo,w2914ns-v2|\ + zio,freezio) ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" ;; @@ -241,7 +242,8 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x22)" 1) ;; wevo,11acnas|\ - wevo,w2914ns-v2) + wevo,w2914ns-v2|\ + zio,freezio) wan_mac=$(mtd_get_mac_binary factory 0x2e) label_mac=$wan_mac ;; |