aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorHanqing Wong <hquu@outlook.com>2017-03-11 15:44:33 +0800
committerMathias Kresin <dev@kresin.me>2017-03-12 09:28:05 +0100
commit38bee61dab029a7608088f64da71c19cfc8cf267 (patch)
treeb54962eab8dc64eb7976bc1c37348c0577b81791 /target
parent562484f25c535ef01a004d11b23243a36bcc50c9 (diff)
downloadupstream-38bee61dab029a7608088f64da71c19cfc8cf267.tar.gz
upstream-38bee61dab029a7608088f64da71c19cfc8cf267.tar.bz2
upstream-38bee61dab029a7608088f64da71c19cfc8cf267.zip
ramips: add support for Netgear R6220
This patch adds support for the Netgear R6220, aka Netgear AC1200 and R6220-100NAS. Specification: - SoC: MediaTek MT7621ST (880 MHz) - Falsh: 128 MiB (Macronix MX30LF1G08AA-TI) - RAM: 128 MiB (Nanya NT5CB64M16FP-DH) - Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. Signed-off-by: Hanqing Wong <hquu@outlook.com>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds5
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh4
-rw-r--r--target/linux/ramips/dts/R6220.dts156
-rw-r--r--target/linux/ramips/image/mt7621.mk17
7 files changed, 190 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index e01ba5f602..66f0c97437 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -291,6 +291,11 @@ px-4885)
set_wifi_led "$board:orange:wifi"
set_usb_led "$board:blue:storage"
;;
+r6220)
+ ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
+ set_wifi_led "$board:green:wifi"
+ set_usb_led "$board:green:usb"
+ ;;
re6500)
ucidef_set_led_default "power" "power" "$board:white:power" "1"
ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 9d3a9de292..828f461c4f 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -95,6 +95,7 @@ ramips_setup_interfaces()
pbr-m1|\
psg1208|\
psg1218|\
+ r6220|\
sap-g3200u3|\
sk-wb8|\
vr500|\
@@ -394,6 +395,10 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_binary factory 40)
wan_mac=$(mtd_get_mac_binary factory 46)
;;
+ r6220)
+ wan_mac=$(mtd_get_mac_binary factory 4)
+ lan_mac=$(macaddr_add "$wan_mac" 1)
+ ;;
rt-n56u)
lan_mac=$(cat /sys/class/net/eth0/address)
lan_mac=$(macaddr_setbit_la "$lan_mac")
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 54961371f8..3bdd2cf1c1 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -33,6 +33,7 @@ get_status_led() {
nbg-419n|\
nbg-419n2|\
pwh2004|\
+ r6220|\
vr500|\
wnce2001|\
wndr3700v5|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 91ce5fbd49..cdebab47cd 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -412,6 +412,9 @@ ramips_board_detect() {
*"Q7")
name="zte-q7"
;;
+ *"R6220")
+ name="r6220"
+ ;;
*"RB750Gr3")
name="rb750gr3"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 3245e2c1c8..7b12d97a00 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -229,7 +229,8 @@ platform_check_image() {
}
return 0
;;
- hc5962)
+ hc5962|\
+ r6220)
# these boards use metadata images
return 0
;;
@@ -266,6 +267,7 @@ platform_pre_upgrade() {
case "$board" in
hc5962|\
+ r6220|\
ubnt-erx)
nand_do_upgrade "$ARGV"
;;
diff --git a/target/linux/ramips/dts/R6220.dts b/target/linux/ramips/dts/R6220.dts
new file mode 100644
index 0000000000..72c6fc7d5a
--- /dev/null
+++ b/target/linux/ramips/dts/R6220.dts
@@ -0,0 +1,156 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear R6220";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "r6220:green:power";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "r6220:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "r6220:green:wan";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "r6220:green:wifi";
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "r6220:green:wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "SC PID";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x400000>;
+ };
+
+ partition@600000 {
+ label = "ubi";
+ reg = <0x600000 0x1c00000>;
+ };
+
+ factory: partition@2e00000 {
+ label = "factory";
+ reg = <0x2e00000 0x100000>;
+ read-only;
+ };
+
+ partition@4200000 {
+ label = "reserved";
+ reg = <0x4200000 0x3c00000>;
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x00000004>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart3", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 6704f84dc5..a90cf17aa4 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -118,6 +118,23 @@ define Device/pbr-m1
endef
TARGET_DEVICES += pbr-m1
+define Device/r6220
+ DTS := R6220
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ KERNEL := $(KERNEL_DTB) | uImage lzma
+ IMAGE_SIZE := 28672k
+ UBINIZE_OPTS := -E 5
+ IMAGES := sysupgrade.tar kernel.bin rootfs.bin
+ IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ IMAGE/kernel.bin := append-kernel
+ IMAGE/rootfs.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+ DEVICE_TITLE := Netgear R6220
+ DEVICE_PACKAGES := kmod-usb2 kmod-mt76
+endef
+TARGET_DEVICES += r6220
+
define Device/rb750gr3
DTS := RB750Gr3
IMAGE_SIZE := $(ralink_default_fw_size_16M)