aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorRafał Miłecki <rafal@milecki.pl>2022-03-04 16:03:26 +0100
committerRafał Miłecki <rafal@milecki.pl>2022-03-04 16:14:59 +0100
commit93259e8ca261c7965618fe11c2d385638da5cfa6 (patch)
tree48a19a9fdfba68ae369a1a97a02f53b9ddf6c37f /target
parent247eaa44161b0a07e2dd40ffaa181d47ca10a96b (diff)
downloadupstream-93259e8ca261c7965618fe11c2d385638da5cfa6.tar.gz
upstream-93259e8ca261c7965618fe11c2d385638da5cfa6.tar.bz2
upstream-93259e8ca261c7965618fe11c2d385638da5cfa6.zip
bcm4908: support "rootfs_data" on U-Boot devices
1. Create "rootfs_data" dynamicaly U-Boot firmware images can contain only 2 UBI volumes: bootfs (container with U-Boot + kernel + DTBs) and rootfs (e.g. squashfs). There is no way to include "rootfs_data" UBI volume or make firmware file tell U-Boot to create one. For that reason "rootfs_data" needs to be created dynamically. Use preinit script to handle that. Fire it right before "mount_root" one. 2. Relate "rootfs_data" to flashed firmware As already explained flashing new firmware with U-Boot will do nothing to the "rootfs_data". It could result in new firmware reusing old "rootfs_data" overlay UBI volume and its file. Users expect a clean state after flashing firmware (even if flashing the same one). Solve that by reading flash counter of running firmware and storing it in "rootfs_data" UBI volume. Every mismatch will result in wiping old data. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Diffstat (limited to 'target')
-rw-r--r--target/linux/bcm4908/base-files/lib/functions/bcm4908.sh73
-rw-r--r--target/linux/bcm4908/base-files/lib/preinit/75_rootfs_prepare35
-rw-r--r--target/linux/bcm4908/base-files/lib/upgrade/platform.sh27
3 files changed, 122 insertions, 13 deletions
diff --git a/target/linux/bcm4908/base-files/lib/functions/bcm4908.sh b/target/linux/bcm4908/base-files/lib/functions/bcm4908.sh
new file mode 100644
index 0000000000..aea31e794b
--- /dev/null
+++ b/target/linux/bcm4908/base-files/lib/functions/bcm4908.sh
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+
+FS_STATE_READY=2
+
+# $(1): file to read from
+# $(2): offset in bytes
+get_hex_u32_le() {
+ dd if="$1" skip=$2 bs=1 count=4 2>/dev/null | hexdump -v -e '1/4 "%02x"'
+}
+
+# Setup /tmp/env.config to provide "metadata" UBI volume access
+#
+# It can be used with "fw_printenv -c /tmp/env.config"
+bcm4908_pkgtb_setup_env_config() {
+ local size=$((0x$(get_hex_u32_le /dev/ubi0_1 4)))
+
+ dd if=/dev/ubi0_1 of=/tmp/env.head count=8 iflag=count_bytes
+ dd if=/dev/ubi0_1 of=/tmp/env.body skip=8 iflag=skip_bytes
+ printf "%s\t0x%x\t0x%x\t0x%x" "/tmp/env.body" 0x0 $size $size > /tmp/env.config
+}
+
+bcm4908_committed_image_seq() {
+ bcm4908_pkgtb_setup_env_config
+
+ commited="$(fw_printenv -n -c /tmp/env.config COMMITTED)"
+ [ -n "$commited" ] && {
+ seq=$(fw_printenv -n -c /tmp/env.config SEQ | cut -d ',' -f $commited)
+ [ -n "$seq" ] && {
+ echo $seq
+ return
+ }
+ }
+
+ echo "Failed to read COMMITED and SEQ from metadata1" >&2
+}
+
+# Make sure "rootfs_data" UBI volume matches currently flashed image
+#
+# On mismatch "rootfs_data" will be wiped and assigned
+#
+# $1: UBI volume of "rootfs_data" (e.g. ubi0_123)
+bcm4908_verify_rootfs_data() {
+ local ubivol="$1"
+ local dir=/tmp/rootfs_data
+ local seq="$(bcm4908_committed_image_seq)"
+
+ [ -z "$seq" ] && return
+
+ mkdir $dir
+ if ! mount -t ubifs /dev/$ubivol $dir; then
+ echo "Failed to mount $ubivol UBI volume" >&2
+ rmdir $dir
+ return
+ fi
+
+ # Wipe rootfs_data if it doesn't belong to us
+ [ "$(readlink $dir/.openwrt-image-seq)" != "$seq" ] && {
+ echo "Removing \"rootfs_data\" content"
+ rm -rf $dir/..?* $dir/.[!.]* $dir/*
+ }
+
+ # If rootfs_data is clean (or was just wiped) claim it
+ [ -z "$(ls -A $dir)" ] && {
+ echo "Assigning \"rootfs_data\" to the current firmware"
+ # Claim this "rootfs_data"
+ ln -s $seq $dir/.openwrt-image-seq
+ # Mark it ready to avoid "mount_root" wiping it again
+ ln -s $FS_STATE_READY $dir/.fs_state
+ }
+
+ umount $dir
+ rmdir $dir
+}
diff --git a/target/linux/bcm4908/base-files/lib/preinit/75_rootfs_prepare b/target/linux/bcm4908/base-files/lib/preinit/75_rootfs_prepare
new file mode 100644
index 0000000000..07fa21814e
--- /dev/null
+++ b/target/linux/bcm4908/base-files/lib/preinit/75_rootfs_prepare
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+
+. /lib/functions/bcm4908.sh
+
+rootfs_create() {
+ local blocks
+
+ blocks=$(cat /sys/class/ubi/ubi0/avail_eraseblocks)
+ [ -z "$blocks" ] && {
+ echo "Failed to read amount of available erase blocks" >&2
+ return
+ }
+
+ # Use 80% of remaining flash size for "rootfs_data"
+ ubimkvol /dev/ubi0 -n 20 -N rootfs_data --lebs $((blocks / 100 * 80))
+ mknod -m 0600 /dev/ubi0_20 c 252 21
+
+ bcm4908_verify_rootfs_data ubi0_20
+}
+
+rootfs_prepare() {
+ # Do nothing on CFE devices
+ ubinfo /dev/ubi0 -N metadata1 > /dev/null 2>&1 || exit 0
+
+ # Find UBI volume device (e.g. ubi0_123)
+ local ubivol="$(grep rootfs_data /sys/devices/virtual/ubi/ubi*/ubi*/name | sed -n 's/.*\(ubi\d*_\d*\).*/\1/p')"
+ if [ -n "$ubivol" ]; then
+ bcm4908_verify_rootfs_data $ubivol
+ else
+ echo "Creating \"rootfs_data\" UBI volume"
+ rootfs_create
+ fi
+}
+
+boot_hook_add preinit_main rootfs_prepare
diff --git a/target/linux/bcm4908/base-files/lib/upgrade/platform.sh b/target/linux/bcm4908/base-files/lib/upgrade/platform.sh
index 1b94801fb0..0974331801 100644
--- a/target/linux/bcm4908/base-files/lib/upgrade/platform.sh
+++ b/target/linux/bcm4908/base-files/lib/upgrade/platform.sh
@@ -1,6 +1,8 @@
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
-RAMFS_COPY_BIN="bcm4908img expr grep fdtget fw_printenv fw_setenv tr"
+. /lib/functions/bcm4908.sh
+
+RAMFS_COPY_BIN="bcm4908img expr grep ln fdtget fw_printenv fw_setenv readlink tr"
PART_NAME=firmware
@@ -134,17 +136,7 @@ platform_pkgtb_get_image() {
}
}
-platform_pkgtb_setup_env_config() {
- local size=$((0x$(get_hex_u32_le /dev/ubi0_1 4)))
-
- dd if=/dev/ubi0_1 of=/tmp/env.head count=8 iflag=count_bytes
- dd if=/dev/ubi0_1 of=/tmp/env.body skip=8 iflag=skip_bytes
- printf "%s\t0x%x\t0x%x\t0x%x" "/tmp/env.body" 0x0 $size $size > /tmp/env.config
-}
-
platform_pkgtb_get_upgrade_index() {
- platform_pkgtb_setup_env_config
-
case "$(fw_printenv -l /tmp -n -c /tmp/env.config COMMITTED)" in
1) echo 2;;
2) echo 1;;
@@ -160,8 +152,6 @@ platform_pkgtb_commit() {
local seq2
local tmp
- platform_pkgtb_setup_env_config
-
# Read current values
for valid in $(fw_printenv -l /tmp -n -c /tmp/env.config VALID | tr ',' ' '); do
case "$valid" in
@@ -272,11 +262,20 @@ platform_check_image() {
# upgrade
#
+platform_pkgtb_clean_rootfs_data() {
+ local ubidev=$(nand_find_ubi $CI_UBIPART)
+ local ubivol="$(nand_find_volume $ubidev rootfs_data)"
+
+ bcm4908_verify_rootfs_data "$ubivol"
+}
+
platform_do_upgrade_pkgtb() {
local cmd="${2:-cat}"
local size
local idx bootfs_id rootfs_id
+ bcm4908_pkgtb_setup_env_config
+
idx=$(platform_pkgtb_get_upgrade_index)
case "$idx" in
1) bootfs_id=3; rootfs_id=4;;
@@ -295,6 +294,8 @@ platform_do_upgrade_pkgtb() {
platform_pkgtb_commit $idx
+ CI_UBIPART="image"
+ platform_pkgtb_clean_rootfs_data
nand_do_upgrade_success
}