ramips: add support for Etisalat S3

Etisalat S3 is a wireless WiFi 5 router manufactured by Sercomm company.

Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB
Flash: 128 MiB
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615E): a/n/ac, 4x4
Ethernet: 5x GbE (WAN, LAN1, LAN2, LAN3, LAN4)
USB ports: 1x USB3.0
Button: 2 buttons (Reset & WPS)
LEDs:
   - 1x Status (RGB)
   - 1x 2.4G (blue, hardware, mt76-phy0)
   - 1x 5G (blue, hardware, mt76-phy1)
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot

Installation
-----------------
1.  Login to the router web interface under admin account
2.  Navigate to Settings -> Configuration -> Save to Computer
3.  Decode the configuration. For example, using cfgtool.py tool (see
    related section):
       cfgtool.py -u configurationBackup.cfg
4.  Open configurationBackup.xml and find the following line:
    <PARAMETER name="Password" type="string" value="<your router serial \
       is here>" writable="1" encryption="1" password="1"/>
5.  Insert the following line after and save:
<PARAMETER name="Enable" type="boolean" value="1" writable="1" encryption="0"/>
6.  Encode the configuration. For example, using cfgtool.py tool:
       cfgtool.py -p configurationBackup.xml
7.  Upload the changed configuration (configurationBackup_changed.cfg) to
    the router
8.  Login to the router web interface (SuperUser:ETxxxxxxxxxx, where
    ETxxxxxxxxxx is the serial number from the backplate label)
9.  Navigate to Settings -> WAN -> Add static IP interface (e.g.
    10.0.0.1/255.255.255.0)
10. Navigate to Settings -> Remote cotrol -> Add SSH, port 22,
    10.0.0.0/255.255.255.0 and interface created before
11. Change IP of your client to 10.0.0.2/255.255.255.0 and connect the
    ethernet cable to the WAN port of the router
12. Connect to the router using SSH shell under SuperUser account
13. Run in SSH shell:
       sh
14. Make a mtd backup (optional, see related section)
15. Change bootflag to Sercomm1 and reboot:
       printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
       reboot
16. Login to the router web interface under admin account
17. Remove dots from the OpenWrt factory image filename
18. Update firmware via web using OpenWrt factory image

Revert to stock
---------------
Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
   printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3

mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
      cd /tmp
      for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \
      tftp -l mtd$i -p 10.0.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
      tftp -l mtd.md5 -p 10.0.0.2

Recovery
--------
Use sercomm-recovery tool.
Link: https://github.com/danitool/sercomm-recovery

MAC Addresses
-------------
+-----+------------+---------+
| use | address    | example |
+-----+------------+---------+
| LAN | label      | *:50    |
| WAN | label + 11 | *:5b    |
| 2g  | label + 2  | *:52    |
| 5g  | label + 3  | *:53    |
+-----+------------+---------+
The label MAC address was found in Factory 0x21000

cfgtool.py
----------
A tool for decoding and encoding Sercomm configs.
Link: https://github.com/r3d5ky/sercomm_cfg_unpacker

Co-authored-by: Karim Dehouche <karimdplay@gmail.com>
Co-authored-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>

5 files changed, 265 insertions, 3 deletions

diff --git a/target/linux/ramips/dts/mt7621_etisalat_s3.dts b/target/linux/ramips/dts/mt7621_etisalat_s3.dts
new file mode 100644
index 0000000000..65d168fd80
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_etisalat_s3.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "etisalat,s3", "mediatek,mt7621-soc";
+	model = "Etisalat S3";
+
+	aliases {
+		label-mac-device = &gmac0;
+
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_red;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "blue:wan";
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_green: led-1 {
+			label = "green:status";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_red: led-2 {
+			label = "red:status";
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	ubi-concat {
+		compatible = "mtd-concat";
+		devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi";
+				reg = <0x0 0x4f80000>;
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partitions {
+		compatible = "sercomm,sc-partitions", "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+			sercomm,scpart-id = <0>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "dynamic partition map";
+			reg = <0x100000 0x100000>;
+			sercomm,scpart-id = <1>;
+			read-only;
+		};
+
+		factory: partition@200000 {
+			label = "Factory";
+			reg = <0x200000 0x100000>;
+			sercomm,scpart-id = <2>;
+			read-only;
+
+			compatible = "nvmem-cells";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			macaddr_factory_21000: macaddr@21000 {
+				reg = <0x21000 0x6>;
+			};
+		};
+
+		partition@300000 {
+			label = "Boot Flag";
+			reg = <0x300000 0x100000>;
+			sercomm,scpart-id = <3>;
+		};
+
+		partition@400000 {
+			label = "kernel";
+			reg = <0x400000 0x600000>;
+			sercomm,scpart-id = <4>;
+		};
+
+		partition@a00000 {
+			label = "Kernel 2";
+			reg = <0xa00000 0x600000>;
+			sercomm,scpart-id = <5>;
+			read-only;
+		};
+
+		ubiconcat0: partition@1000000 {
+			label = "File System 1";
+			reg = <0x1000000 0x2000000>;
+			sercomm,scpart-id = <6>;
+		};
+
+		partition@3000000 {
+			label = "File System 2";
+			reg = <0x3000000 0x2000000>;
+			sercomm,scpart-id = <7>;
+			read-only;
+		};
+
+		ubiconcat1: partition@5000000 {
+			label = "Configuration/log";
+			reg = <0x5000000 0x1400000>;
+			sercomm,scpart-id = <8>;
+		};
+
+		ubiconcat2: partition@6400000 {
+			label = "application tmp buffer (Ftool)";
+			reg = <0x6400000 0x1b80000>;
+			sercomm,scpart-id = <9>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x8000>;
+		ieee80211-freq-limit = <5000000 6000000>;
+
+		nvmem-cells = <&macaddr_factory_21000>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <(3)>;
+	};
+};
+
+&pcie1 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+		ieee80211-freq-limit = <2400000 2500000>;
+
+		nvmem-cells = <&macaddr_factory_21000>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <(2)>;
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_factory_21000>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	status = "okay";
+	label = "wan";
+	phy-handle = <&ethphy0>;
+
+	nvmem-cells = <&macaddr_factory_21000>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <(11)>;
+};
+
+&mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&switch0 {
+	ports {
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "lan4";
+		};
+	};
+};
+
+&uartlite3 {
+	status = "okay";
+};
+
+&state_default {
+	gpio {
+		groups = "i2c", "jtag";
+		function = "gpio";
+	};
+};
diff --git a/target/linux/ramips/image/common-sercomm.mk b/target/linux/ramips/image/common-sercomm.mk
index e96cba879c..1cd6d1ece7 100644
--- a/target/linux/ramips/image/common-sercomm.mk
+++ b/target/linux/ramips/image/common-sercomm.mk
@@ -79,9 +79,9 @@ define Device/sercomm_dxx
 	lzma -a0 | uImage lzma
   IMAGES += factory.img
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  IMAGE/factory.img := append-ubi | sercomm-part-tag rootfs | \
-	sercomm-prepend-tagged-kernel kernel | gzip | sercomm-payload | \
-	sercomm-crypto
+  IMAGE/factory.img := append-ubi | check-size | \
+	sercomm-part-tag rootfs | sercomm-prepend-tagged-kernel kernel | \
+	gzip | sercomm-payload | sercomm-crypto
   SERCOMM_KERNEL_OFFSET := 0x400100
   SERCOMM_ROOTFS_OFFSET := 0x1000000
 endef
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 08aa592be8..fd99fa22c2 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -798,6 +798,19 @@ define Device/elecom_wrc-2533gst2
 endef
 TARGET_DEVICES += elecom_wrc-2533gst2
 
+define Device/etisalat_s3
+  $(Device/sercomm_dxx)
+  IMAGE_SIZE := 32768k
+  SERCOMM_HWID := DDK
+  SERCOMM_HWVER := 10000
+  SERCOMM_SWVER := 4009
+  DEVICE_VENDOR := Etisalat
+  DEVICE_MODEL := S3
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
+	kmod-usb3 uboot-envtools
+endef
+TARGET_DEVICES += etisalat_s3
+
 define Device/firefly_firewrt
   $(Device/dsa-migration)
   IMAGE_SIZE := 16064k
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 42e50451e3..6e8d35ea49 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -26,6 +26,7 @@ asus,rt-n56u-b1)
 beeline,smartbox-flash|\
 beeline,smartbox-giga|\
 beeline,smartbox-turbo|\
+etisalat,s3|\
 rostelecom,rt-sf-1)
 	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
 	;;
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 06a35077dc..c665820169 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -64,6 +64,7 @@ platform_do_upgrade() {
 	dlink,dir-2660-a1|\
 	dlink,dir-3060-a1|\
 	dlink,dir-853-a3|\
+	etisalat,s3|\
 	h3c,tx1800-plus|\
 	h3c,tx1801-plus|\
 	h3c,tx1806|\