diff options
| author | Russell Senior <russell@personaltelco.net> | 2021-08-12 22:57:41 -0700 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-08-22 22:41:52 +0200 |
| commit | 61b49cd3f8587acddb12582fe7fc91a8f519cf4d (patch) | |
| tree | abcfd21fdbd82f1208245ae32458b0b46304c1e1 /target | |
| parent | 96db7d2a73d5eeffc35ca5183091c131cf0aba2d (diff) | |
| download | upstream-61b49cd3f8587acddb12582fe7fc91a8f519cf4d.tar.gz upstream-61b49cd3f8587acddb12582fe7fc91a8f519cf4d.tar.bz2 upstream-61b49cd3f8587acddb12582fe7fc91a8f519cf4d.zip | |
ath79: add support for Ubiquiti PowerBeam M2 (XW)
This patch adds support for the Ubiquiti PowerBeam M2 (XW), e.g. PBE-M2-400,
a 802.11n wireless with a feed+dish form factor. This device was previously
supported by the ar71xx loco-m-xw firmware.
Specifications:
- Atheros AR9342 SoC
- 64 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in
- Power and LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1)
Flashing via stock GUI:
- Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see
https://openwrt.org/toh/ubiquiti/powerbeam installation instructions)
- Upload the factory image via AirOS web GUI.
Flashing via TFTP:
- Use a pointy tool (e.g., unbent paperclip) to keep the
reset button pressed.
- Power on the device (keep reset button pressed).
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button.
- The device starts a TFTP server at 192.168.1.20.
- Set a static IP on the computer (e.g., 192.168.1.21/24).
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-ubnt_powerbeam-m2-xw-squashfs-factory.bin
WARNING: so far, no non-destructive method has been discovered for
opening the enclosure to reach the serial console. Internal photos
are available here: https://fcc.io/SWX-NBM2HP
Signed-off-by: Russell Senior <russell@personaltelco.net>
Diffstat (limited to 'target')
4 files changed, 44 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts new file mode 100644 index 0000000000..046715b00a --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m2-xw.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9342_ubnt_xw.dtsi" + +/ { + compatible = "ubnt,powerbeam-m2-xw", "ubnt,xw", "qca,ar9342"; + model = "Ubiquiti PowerBeam M2 (XW)"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <4>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M and 10M */ + pll-data = <0x02000000 0x00000101 0x00001313>; + + phy-mode = "rgmii-id"; + phy-handle = <&phy1>; + + gmac-config { + device = <&gmac>; + rxd-delay = <3>; + rxdv-delay = <3>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 5707bbac4e..8715a57213 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -406,6 +406,7 @@ ubnt,nanostation-loco-m-xw|\ ubnt,nanostation-m|\ ubnt,nanostation-m-xw|\ ubnt,picostation-m|\ +ubnt,powerbeam-m2-xw|\ ubnt,powerbeam-m5-xw|\ ubnt,powerbridge-m|\ ubnt,rocket-m) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 780068790c..fba6d56674 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -86,6 +86,7 @@ ath79_setup_interfaces() ubnt,picostation-m|\ ubnt,powerbeam-5ac-500|\ ubnt,powerbeam-5ac-gen2|\ + ubnt,powerbeam-m2-xw|\ ubnt,powerbeam-m5-xw|\ ubnt,powerbridge-m|\ ubnt,rocket-5ac-lite|\ diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 547af632f6..3888e1652b 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -328,6 +328,14 @@ define Device/ubnt_powerbeam-5ac-gen2 endef TARGET_DEVICES += ubnt_powerbeam-5ac-gen2 +define Device/ubnt_powerbeam-m2-xw + $(Device/ubnt-xw) + DEVICE_MODEL := PowerBeam M2 + DEVICE_PACKAGES += rssileds + SUPPORTED_DEVICES += loco-m-xw +endef +TARGET_DEVICES += ubnt_powerbeam-m2-xw + define Device/ubnt_powerbeam-m5-xw $(Device/ubnt-xw) DEVICE_MODEL := PowerBeam M5 |