diff options
| author | Hannu Nyman <hannu.nyman@iki.fi> | 2018-08-13 23:10:47 +0300 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-08-14 10:19:37 +0200 |
| commit | 437e35f8a3988cadf8797354e78cce3696b90916 (patch) | |
| tree | 98c67f09d8c87880f67b18ec73f71ed3bc0145ca /target | |
| parent | b2a33d5463e88b74b021711d7f392edeafe61041 (diff) | |
| download | upstream-437e35f8a3988cadf8797354e78cce3696b90916.tar.gz upstream-437e35f8a3988cadf8797354e78cce3696b90916.tar.bz2 upstream-437e35f8a3988cadf8797354e78cce3696b90916.zip | |
ath79: Add wifi to WNDR3700, WNDR3700v2 and WNDR3800
Add ath9k wifi capabilities to WNDR3700 family.
* use kmod-owl-loader to load firmware from "art"
* add wifi to DTS
* add wifi LEDs
Avoid using the same MAC for eth0 LAN and wlan0 by
toggling the eth0 MAC into a locally administered MAC.
That is currently done by in user-space by adding a
uci config item into /etc/config/network
(More elegant solution might be setting it already in
preinit phase.)
Known issues:
* wifi firmware file may not get created on the first boot
after flashing on time to bring wifi normally up. Likely
the overlay jffs2 is not yet ready for creating the
firmware file. "wifi up" may still bring wifi up.
Wifi will work normally at subsequent boots.
* phy0 and phy1 may get assigned mixed, so that phy0 may
be the 5GHz radio instead of the normal 2.4GHz, and vice
versa for phy1. Does not happen always, but may happen.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[fix the wifi unit address in the dts]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target')
4 files changed, 50 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 68f9523568..da98061d08 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -160,6 +160,11 @@ ath79_setup_macs() lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) ;; + netgear,wndr3700|\ + netgear,wndr3700v2|\ + netgear,wndr3800) + lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)") + ;; phicomm,k2t) lan_mac=$(k2t_get_mac "lan_mac") wan_mac=$(k2t_get_mac "wan_mac") diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 29c11bbd5f..f71139c55c 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -146,6 +146,11 @@ case "$FIRMWARE" in ath9k_eeprom_extract "caldata" 4096 3768 ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524 ;; + netgear,wndr3700|\ + netgear,wndr3700v2|\ + netgear,wndr3800) + ath9k_eeprom_extract "art" 4096 3768 + ;; *) ath9k_eeprom_die "board $board is not supported yet" ;; @@ -157,6 +162,11 @@ case "$FIRMWARE" in ath9k_eeprom_extract "caldata" 20480 3768 ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524 ;; + netgear,wndr3700|\ + netgear,wndr3700v2|\ + netgear,wndr3800) + ath9k_eeprom_extract "art" 20480 3768 + ;; *) ath9k_eeprom_die "board $board is not supported yet" ;; diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi b/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi index f3751d588d..ef9984c86e 100644 --- a/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi +++ b/target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi @@ -67,6 +67,22 @@ }; }; + ath9k-leds { + compatible = "gpio-leds"; + wlan2g { + label = "netgear:green:wlan2g"; + gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + wlan5g { + label = "netgear:blue:wlan5g"; + gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy1tpt"; + }; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; poll-interval = <100>; @@ -138,6 +154,24 @@ &pcie0 { status = "okay"; + + ath9k0: wifi@0,11 { + compatible = "pci168c,0029"; + reg = <0x8800 0 0 0 0x10000>; + mtd-mac-address = <&art 0x0>; + qca,no-eeprom; + #gpio-cells = <2>; + gpio-controller; + }; + + ath9k1: wifi@0,12 { + compatible = "pci168c,0029"; + reg = <0x9000 0 0 0 0x10000>; + mtd-mac-address = <&art 0xc>; + qca,no-eeprom; + #gpio-cells = <2>; + gpio-controller; + }; }; &uart { diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 117198f70b..01020810cc 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -141,7 +141,7 @@ define Device/netgear_wndr3x00 IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE) IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE) - DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader endef define Device/netgear_wndr3700 |