kernel: split 82574L patch into multiple files

When refreshing patches that cointain multiple patches including headers
in a single file, quilt will remove the headers from all but the first
patch. This makes it difficult to review commits that refresh patches.
Next to that, if only a few of the patch series are accepted in -stable,
the patch needs to be manually modified. With each patch in a separate
file, it's just a matter of git rm.

Refresh patches while at it.

Patchwork links:
[1/5] https://patchwork.kernel.org/patch/9857487/
[2/5] https://patchwork.kernel.org/patch/9857489/
[3/5] https://patchwork.kernel.org/patch/9857495/
[4/5] https://patchwork.kernel.org/patch/9857491/
[5/5] https://patchwork.kernel.org/patch/9857493/

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

6 files changed, 326 insertions, 327 deletions

diff --git a/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch b/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch
new file mode 100644
index 0000000000..8ed91db6ef
--- /dev/null
+++ b/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch
@@ -0,0 +1,52 @@
+From patchwork Fri Jul 21 18:36:23 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [1/5] e1000e: Fix error path in link detection
+From: Benjamin Poirier <bpoirier@suse.com>
+X-Patchwork-Id: 9857487
+Message-Id: <20170721183627.13373-1-bpoirier@suse.com>
+To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
+ intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
+ linux-kernel@vger.kernel.org
+Date: Fri, 21 Jul 2017 11:36:23 -0700
+
+In case of error from e1e_rphy(), the loop will exit early and "success"
+will be set to true erroneously.
+
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+---
+ drivers/net/ethernet/intel/e1000e/phy.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/phy.c
++++ b/drivers/net/ethernet/intel/e1000e/phy.c
+@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e
+ 	s32 ret_val = 0;
+ 	u16 i, phy_status;
+ 
++	*success = false;
+ 	for (i = 0; i < iterations; i++) {
+ 		/* Some PHYs require the MII_BMSR register to be read
+ 		 * twice due to the link bit being sticky.  No harm doing
+@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e
+ 		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
+ 		if (ret_val)
+ 			break;
+-		if (phy_status & BMSR_LSTATUS)
++		if (phy_status & BMSR_LSTATUS) {
++			*success = true;
+ 			break;
++		}
+ 		if (usec_interval >= 1000)
+ 			msleep(usec_interval / 1000);
+ 		else
+ 			udelay(usec_interval);
+ 	}
+ 
+-	*success = (i < iterations);
+-
+ 	return ret_val;
+ }
+ 
diff --git a/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch b/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
new file mode 100644
index 0000000000..b3291dbd6f
--- /dev/null
+++ b/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
@@ -0,0 +1,43 @@
+From patchwork Fri Jul 21 18:36:24 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [2/5] e1000e: Fix wrong comment related to link detection
+From: Benjamin Poirier <bpoirier@suse.com>
+X-Patchwork-Id: 9857489
+Message-Id: <20170721183627.13373-2-bpoirier@suse.com>
+To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
+ intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
+ linux-kernel@vger.kernel.org
+Date: Fri, 21 Jul 2017 11:36:24 -0700
+
+Reading e1000e_check_for_copper_link() shows that get_link_status is set to
+false after link has been detected. Therefore, it stays TRUE until then.
+
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+Tested-by: Aaron Brown <aaron.f.brown@intel.com>
+---
+ drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -5049,7 +5049,7 @@ static bool e1000e_has_link(struct e1000
+ 
+ 	/* get_link_status is set on LSC (link status) interrupt or
+ 	 * Rx sequence error interrupt.  get_link_status will stay
+-	 * false until the check_for_link establishes link
++	 * true until the check_for_link establishes link
+ 	 * for copper adapters ONLY
+ 	 */
+ 	switch (hw->phy.media_type) {
+@@ -5067,7 +5067,7 @@ static bool e1000e_has_link(struct e1000
+ 		break;
+ 	case e1000_media_type_internal_serdes:
+ 		ret_val = hw->mac.ops.check_for_link(hw);
+-		link_active = adapter->hw.mac.serdes_has_link;
++		link_active = hw->mac.serdes_has_link;
+ 		break;
+ 	default:
+ 	case e1000_media_type_unknown:
diff --git a/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch b/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch
new file mode 100644
index 0000000000..a777138936
--- /dev/null
+++ b/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch
@@ -0,0 +1,32 @@
+From patchwork Fri Jul 21 18:36:25 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [3/5] e1000e: Fix return value test
+From: Benjamin Poirier <bpoirier@suse.com>
+X-Patchwork-Id: 9857495
+Message-Id: <20170721183627.13373-3-bpoirier@suse.com>
+To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
+ intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
+ linux-kernel@vger.kernel.org
+Date: Fri, 21 Jul 2017 11:36:25 -0700
+
+All the helpers return -E1000_ERR_PHY.
+
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+---
+ drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -5074,7 +5074,7 @@ static bool e1000e_has_link(struct e1000
+ 		break;
+ 	}
+ 
+-	if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
++	if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
+ 	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ 		/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
+ 		e_info("Gigabit has been disabled, downgrading speed\n");
diff --git a/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch b/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch
new file mode 100644
index 0000000000..cc2cf7393f
--- /dev/null
+++ b/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch
@@ -0,0 +1,90 @@
+From patchwork Fri Jul 21 18:36:26 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [4/5] e1000e: Separate signaling for link check/link up
+From: Benjamin Poirier <bpoirier@suse.com>
+X-Patchwork-Id: 9857491
+Message-Id: <20170721183627.13373-4-bpoirier@suse.com>
+To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
+ intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
+ linux-kernel@vger.kernel.org
+Date: Fri, 21 Jul 2017 11:36:26 -0700
+
+Lennart reported the following race condition:
+
+\ e1000_watchdog_task
+    \ e1000e_has_link
+        \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link
+            /* link is up */
+            mac->get_link_status = false;
+
+                            /* interrupt */
+                            \ e1000_msix_other
+                                hw->mac.get_link_status = true;
+
+        link_active = !hw->mac.get_link_status
+        /* link_active is false, wrongly */
+
+This problem arises because the single flag get_link_status is used to
+signal two different states: link status needs checking and link status is
+down.
+
+Avoid the problem by using the return value of .check_for_link to signal
+the link status to e1000e_has_link().
+
+Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+---
+ drivers/net/ethernet/intel/e1000e/mac.c    | 11 ++++++++---
+ drivers/net/ethernet/intel/e1000e/netdev.c |  2 +-
+ 2 files changed, 9 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/mac.c
++++ b/drivers/net/ethernet/intel/e1000e/mac.c
+@@ -410,6 +410,9 @@ void e1000e_clear_hw_cntrs_base(struct e
+  *  Checks to see of the link status of the hardware has changed.  If a
+  *  change in link status has been detected, then we read the PHY registers
+  *  to get the current speed/duplex if link exists.
++ *
++ *  Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
++ *  up).
+  **/
+ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
+ {
+@@ -423,7 +426,7 @@ s32 e1000e_check_for_copper_link(struct
+ 	 * Change or Rx Sequence Error interrupt.
+ 	 */
+ 	if (!mac->get_link_status)
+-		return 0;
++		return 1;
+ 
+ 	/* First we want to see if the MII Status Register reports
+ 	 * link.  If so, then we want to get the current speed/duplex
+@@ -461,10 +464,12 @@ s32 e1000e_check_for_copper_link(struct
+ 	 * different link partner.
+ 	 */
+ 	ret_val = e1000e_config_fc_after_link_up(hw);
+-	if (ret_val)
++	if (ret_val) {
+ 		e_dbg("Error configuring flow control\n");
++		return ret_val;
++	}
+ 
+-	return ret_val;
++	return 1;
+ }
+ 
+ /**
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -5056,7 +5056,7 @@ static bool e1000e_has_link(struct e1000
+ 	case e1000_media_type_copper:
+ 		if (hw->mac.get_link_status) {
+ 			ret_val = hw->mac.ops.check_for_link(hw);
+-			link_active = !hw->mac.get_link_status;
++			link_active = ret_val > 0;
+ 		} else {
+ 			link_active = true;
+ 		}
diff --git a/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch b/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
new file mode 100644
index 0000000000..b42fed293d
--- /dev/null
+++ b/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
@@ -0,0 +1,109 @@
+From patchwork Fri Jul 21 18:36:27 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [5/5] e1000e: Avoid receiver overrun interrupt bursts
+From: Benjamin Poirier <bpoirier@suse.com>
+X-Patchwork-Id: 9857493
+Message-Id: <20170721183627.13373-5-bpoirier@suse.com>
+To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
+ intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
+ linux-kernel@vger.kernel.org
+Date: Fri, 21 Jul 2017 11:36:27 -0700
+
+When e1000e_poll() is not fast enough to keep up with incoming traffic, the
+adapter (when operating in msix mode) raises the Other interrupt to signal
+Receiver Overrun.
+
+This is a double problem because 1) at the moment e1000_msix_other()
+assumes that it is only called in case of Link Status Change and 2) if the
+condition persists, the interrupt is repeatedly raised again in quick
+succession.
+
+Ideally we would configure the Other interrupt to not be raised in case of
+receiver overrun but this doesn't seem possible on this adapter. Instead,
+we handle the first part of the problem by reverting to the practice of
+reading ICR in the other interrupt handler, like before commit 16ecba59bc33
+("e1000e: Do not read ICR in Other interrupt"). Thanks to commit
+0a8047ac68e5 ("e1000e: Fix msi-x interrupt automask") which cleared IAME
+from CTRL_EXT, reading ICR doesn't interfere with RxQ0, TxQ0 interrupts
+anymore. We handle the second part of the problem by not re-enabling the
+Other interrupt right away when there is overrun. Instead, we wait until
+traffic subsides, napi polling mode is exited and interrupts are
+re-enabled.
+
+Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
+Fixes: 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt")
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+---
+ drivers/net/ethernet/intel/e1000e/defines.h |  1 +
+ drivers/net/ethernet/intel/e1000e/netdev.c  | 33 +++++++++++++++++++++++------
+ 2 files changed, 27 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/defines.h
++++ b/drivers/net/ethernet/intel/e1000e/defines.h
+@@ -398,6 +398,7 @@
+ #define E1000_ICR_LSC           0x00000004 /* Link Status Change */
+ #define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */
+ #define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */
++#define E1000_ICR_RXO           0x00000040 /* Receiver Overrun */
+ #define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */
+ #define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */
+ /* If this bit asserted, the driver should claim the interrupt */
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -1905,12 +1905,30 @@ static irqreturn_t e1000_msix_other(int
+ 	struct net_device *netdev = data;
+ 	struct e1000_adapter *adapter = netdev_priv(netdev);
+ 	struct e1000_hw *hw = &adapter->hw;
++	u32 icr;
++	bool enable = true;
+ 
+-	hw->mac.get_link_status = true;
++	icr = er32(ICR);
++	if (icr & E1000_ICR_RXO) {
++		ew32(ICR, E1000_ICR_RXO);
++		enable = false;
++		/* napi poll will re-enable Other, make sure it runs */
++		if (napi_schedule_prep(&adapter->napi)) {
++			adapter->total_rx_bytes = 0;
++			adapter->total_rx_packets = 0;
++			__napi_schedule(&adapter->napi);
++		}
++	}
++	if (icr & E1000_ICR_LSC) {
++		ew32(ICR, E1000_ICR_LSC);
++		hw->mac.get_link_status = true;
++		/* guard against interrupt when we're going down */
++		if (!test_bit(__E1000_DOWN, &adapter->state)) {
++			mod_timer(&adapter->watchdog_timer, jiffies + 1);
++		}
++	}
+ 
+-	/* guard against interrupt when we're going down */
+-	if (!test_bit(__E1000_DOWN, &adapter->state)) {
+-		mod_timer(&adapter->watchdog_timer, jiffies + 1);
++	if (enable && !test_bit(__E1000_DOWN, &adapter->state)) {
+ 		ew32(IMS, E1000_IMS_OTHER);
+ 	}
+ 
+@@ -2683,7 +2701,8 @@ static int e1000e_poll(struct napi_struc
+ 		napi_complete_done(napi, work_done);
+ 		if (!test_bit(__E1000_DOWN, &adapter->state)) {
+ 			if (adapter->msix_entries)
+-				ew32(IMS, adapter->rx_ring->ims_val);
++				ew32(IMS, adapter->rx_ring->ims_val |
++				     E1000_IMS_OTHER);
+ 			else
+ 				e1000_irq_enable(adapter);
+ 		}
+@@ -4178,7 +4197,7 @@ static void e1000e_trigger_lsc(struct e1
+ 	struct e1000_hw *hw = &adapter->hw;
+ 
+ 	if (adapter->msix_entries)
+-		ew32(ICS, E1000_ICS_OTHER);
++		ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER);
+ 	else
+ 		ew32(ICS, E1000_ICS_LSC);
+ }
diff --git a/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch b/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch
deleted file mode 100644
index f2966fafbb..0000000000
--- a/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch
+++ /dev/null
@@ -1,327 +0,0 @@
-Subject: [1/5] e1000e: Fix error path in link detection
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792259
-Message-Id: <20170721183627.13373-1-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:23 -0700
-
-In case of error from e1e_rphy(), the loop will exit early and "success"
-will be set to true erroneously.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/phy.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
-index d78d47b41a71..86ff0969efb6 100644
---- a/drivers/net/ethernet/intel/e1000e/phy.c
-+++ b/drivers/net/ethernet/intel/e1000e/phy.c
-@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- 	s32 ret_val = 0;
- 	u16 i, phy_status;
- 
-+	*success = false;
- 	for (i = 0; i < iterations; i++) {
- 		/* Some PHYs require the MII_BMSR register to be read
- 		 * twice due to the link bit being sticky.  No harm doing
-@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- 		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
- 		if (ret_val)
- 			break;
--		if (phy_status & BMSR_LSTATUS)
-+		if (phy_status & BMSR_LSTATUS) {
-+			*success = true;
- 			break;
-+		}
- 		if (usec_interval >= 1000)
- 			msleep(usec_interval / 1000);
- 		else
- 			udelay(usec_interval);
- 	}
- 
--	*success = (i < iterations);
--
- 	return ret_val;
- }
- 
-
-Subject: [2/5] e1000e: Fix wrong comment related to link detection
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792257
-Message-Id: <20170721183627.13373-2-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:24 -0700
-
-Reading e1000e_check_for_copper_link() shows that get_link_status is set to
-false after link has been detected. Therefore, it stays TRUE until then.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
-index 2dcb5463d9b8..58a87134d2e5 100644
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -5074,7 +5074,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
- 
- 	/* get_link_status is set on LSC (link status) interrupt or
- 	 * Rx sequence error interrupt.  get_link_status will stay
--	 * false until the check_for_link establishes link
-+	 * true until the check_for_link establishes link
- 	 * for copper adapters ONLY
- 	 */
- 	switch (hw->phy.media_type) {
-@@ -5092,7 +5092,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
- 		break;
- 	case e1000_media_type_internal_serdes:
- 		ret_val = hw->mac.ops.check_for_link(hw);
--		link_active = adapter->hw.mac.serdes_has_link;
-+		link_active = hw->mac.serdes_has_link;
- 		break;
- 	default:
- 	case e1000_media_type_unknown:
-
-Content-Transfer-Encoding: 7bit
-Subject: [3/5] e1000e: Fix return value test
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792258
-Message-Id: <20170721183627.13373-3-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:25 -0700
-
-All the helpers return -E1000_ERR_PHY.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
-index 58a87134d2e5..fc6a1d9999b2 100644
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -5099,7 +5099,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
- 		break;
- 	}
- 
--	if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
-+	if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
- 	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
- 		/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
- 		e_info("Gigabit has been disabled, downgrading speed\n");
-
-Content-Transfer-Encoding: 7bit
-Subject: [4/5] e1000e: Separate signaling for link check/link up
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792262
-Message-Id: <20170721183627.13373-4-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:26 -0700
-
-Lennart reported the following race condition:
-
-\ e1000_watchdog_task
-    \ e1000e_has_link
-        \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link
-            /* link is up */
-            mac->get_link_status = false;
-
-                            /* interrupt */
-                            \ e1000_msix_other
-                                hw->mac.get_link_status = true;
-
-        link_active = !hw->mac.get_link_status
-        /* link_active is false, wrongly */
-
-This problem arises because the single flag get_link_status is used to
-signal two different states: link status needs checking and link status is
-down.
-
-Avoid the problem by using the return value of .check_for_link to signal
-the link status to e1000e_has_link().
-
-Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/mac.c    | 11 ++++++++---
- drivers/net/ethernet/intel/e1000e/netdev.c |  2 +-
- 2 files changed, 9 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
-index b322011ec282..f457c5703d0c 100644
---- a/drivers/net/ethernet/intel/e1000e/mac.c
-+++ b/drivers/net/ethernet/intel/e1000e/mac.c
-@@ -410,6 +410,9 @@ void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
-  *  Checks to see of the link status of the hardware has changed.  If a
-  *  change in link status has been detected, then we read the PHY registers
-  *  to get the current speed/duplex if link exists.
-+ *
-+ *  Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
-+ *  up).
-  **/
- s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
- {
-@@ -423,7 +426,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
- 	 * Change or Rx Sequence Error interrupt.
- 	 */
- 	if (!mac->get_link_status)
--		return 0;
-+		return 1;
- 
- 	/* First we want to see if the MII Status Register reports
- 	 * link.  If so, then we want to get the current speed/duplex
-@@ -461,10 +464,12 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
- 	 * different link partner.
- 	 */
- 	ret_val = e1000e_config_fc_after_link_up(hw);
--	if (ret_val)
-+	if (ret_val) {
- 		e_dbg("Error configuring flow control\n");
-+		return ret_val;
-+	}
- 
--	return ret_val;
-+	return 1;
- }
- 
- /**
-diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
-index fc6a1d9999b2..5a8ab1136566 100644
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -5081,7 +5081,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
- 	case e1000_media_type_copper:
- 		if (hw->mac.get_link_status) {
- 			ret_val = hw->mac.ops.check_for_link(hw);
--			link_active = !hw->mac.get_link_status;
-+			link_active = ret_val > 0;
- 		} else {
- 			link_active = true;
- 		}
-
-Content-Transfer-Encoding: 7bit
-Subject: [5/5] e1000e: Avoid receiver overrun interrupt bursts
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792260
-Message-Id: <20170721183627.13373-5-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:27 -0700
-
-When e1000e_poll() is not fast enough to keep up with incoming traffic, the
-adapter (when operating in msix mode) raises the Other interrupt to signal
-Receiver Overrun.
-
-This is a double problem because 1) at the moment e1000_msix_other()
-assumes that it is only called in case of Link Status Change and 2) if the
-condition persists, the interrupt is repeatedly raised again in quick
-succession.
-
-Ideally we would configure the Other interrupt to not be raised in case of
-receiver overrun but this doesn't seem possible on this adapter. Instead,
-we handle the first part of the problem by reverting to the practice of
-reading ICR in the other interrupt handler, like before commit 16ecba59bc33
-("e1000e: Do not read ICR in Other interrupt"). Thanks to commit
-0a8047ac68e5 ("e1000e: Fix msi-x interrupt automask") which cleared IAME
-from CTRL_EXT, reading ICR doesn't interfere with RxQ0, TxQ0 interrupts
-anymore. We handle the second part of the problem by not re-enabling the
-Other interrupt right away when there is overrun. Instead, we wait until
-traffic subsides, napi polling mode is exited and interrupts are
-re-enabled.
-
-Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Fixes: 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt")
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/defines.h |  1 +
- drivers/net/ethernet/intel/e1000e/netdev.c  | 33 +++++++++++++++++++++++------
- 2 files changed, 27 insertions(+), 7 deletions(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
-index 0641c0098738..afb7ebe20b24 100644
---- a/drivers/net/ethernet/intel/e1000e/defines.h
-+++ b/drivers/net/ethernet/intel/e1000e/defines.h
-@@ -398,6 +398,7 @@
- #define E1000_ICR_LSC           0x00000004 /* Link Status Change */
- #define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */
- #define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */
-+#define E1000_ICR_RXO           0x00000040 /* Receiver Overrun */
- #define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */
- #define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */
- /* If this bit asserted, the driver should claim the interrupt */
-diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
-index 5a8ab1136566..803edd1a6401 100644
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -1910,12 +1910,30 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
- 	struct net_device *netdev = data;
- 	struct e1000_adapter *adapter = netdev_priv(netdev);
- 	struct e1000_hw *hw = &adapter->hw;
-+	u32 icr;
-+	bool enable = true;
-+
-+	icr = er32(ICR);
-+	if (icr & E1000_ICR_RXO) {
-+		ew32(ICR, E1000_ICR_RXO);
-+		enable = false;
-+		/* napi poll will re-enable Other, make sure it runs */
-+		if (napi_schedule_prep(&adapter->napi)) {
-+			adapter->total_rx_bytes = 0;
-+			adapter->total_rx_packets = 0;
-+			__napi_schedule(&adapter->napi);
-+		}
-+	}
-+	if (icr & E1000_ICR_LSC) {
-+		ew32(ICR, E1000_ICR_LSC);
-+		hw->mac.get_link_status = true;
-+		/* guard against interrupt when we're going down */
-+		if (!test_bit(__E1000_DOWN, &adapter->state)) {
-+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
-+		}
-+	}
- 
--	hw->mac.get_link_status = true;
--
--	/* guard against interrupt when we're going down */
--	if (!test_bit(__E1000_DOWN, &adapter->state)) {
--		mod_timer(&adapter->watchdog_timer, jiffies + 1);
-+	if (enable && !test_bit(__E1000_DOWN, &adapter->state)) {
- 		ew32(IMS, E1000_IMS_OTHER);
- 	}
- 
-@@ -2687,7 +2705,8 @@ static int e1000e_poll(struct napi_struct *napi, int weight)
- 		napi_complete_done(napi, work_done);
- 		if (!test_bit(__E1000_DOWN, &adapter->state)) {
- 			if (adapter->msix_entries)
--				ew32(IMS, adapter->rx_ring->ims_val);
-+				ew32(IMS, adapter->rx_ring->ims_val |
-+				     E1000_IMS_OTHER);
- 			else
- 				e1000_irq_enable(adapter);
- 		}
-@@ -4204,7 +4223,7 @@ static void e1000e_trigger_lsc(struct e1000_adapter *adapter)
- 	struct e1000_hw *hw = &adapter->hw;
- 
- 	if (adapter->msix_entries)
--		ew32(ICS, E1000_ICS_OTHER);
-+		ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER);
- 	else
- 		ew32(ICS, E1000_ICS_LSC);
- }